Parallel Slide Tilt Fittings-Slide and Fold Fittings Lift and Sl

"New Generation 2004" The new programme of lift-slide fittings for timber, PVC and aluminium windows and doors

Lift-slide and Lift-tilt-slide fittings HS-Master Tubular threshold G.U-thermostep

1

Make more with the new generation

Tradition combined with innovation: The new G.U lift-slide programme!

3.

3.

G.U, with over 50 years experience in lift-slide fittings has now developed a cutting edge new generation.

1

New: Gear with extended range of application... ... together with the new runner: considerably reduced handle load – super light operation.

2

New: Lift-slide runner Due to new bearings the new runners provide even smoother running.

3

New: Finish ferGUard*silver All fitting components throughout the complete lift-slide programme come with the advanced ferGUard*silver finish.

4

New: Handles also in stainless steel DIRIGENT and RONDO for lift-slide units.

Designed for highest demands: the new lift-slide runners combined with both the liftslide fittings G.U-934 and G.U-937 and the lift-tilt-slide fittings G.U-954 / G.U-957.

With the new programme only one basic box of runners is required.

2

Convincing – the new lift-slide programme 2004

Flexible application: With the new lift-slide programme, G.U again offers a perfect hardware system covering a wide range of applications.

Lift-slide fittings G.U-934 G.U-937 250 kg 720 up to 3.300 mm

150 kg 720 up to 2.200 mm

Weight Width / SW

800 up to 3.265 mm

800 up to 3.265 mm

Height / SH

Basic box of lift-slide fittings plus box of stay arm...

Lilt-tilt-slide fittings G.U-957 G.U-954

... the simple additional box to make the new lift-tilt-slide fittings G.U-954 / 957 for all system variants of the programme.

250 kg 720 up to 3.000 mm

150 kg 720 up to 2.200 mm

Weight Width / SW

855 up to 2.750 mm

855 up to 2.750 mm

Height / SH

Range of stainless steel handles Beautifully designed handles for the operation of lift-slide units in DIRIGENT or RONDO style.

Closed position

Range of handles in standard colours ... ... for single and double sided application, inside and out-side lockable, removable handles.

Slide position

Range of handles in special version For "barrier free living", prolonged door handles are available as special version.

Use: opening and closing of sliding doors from seated position.

Please request the G.U planning documentation for "barrier free construction".

Closed position

Slide

Tilt 3

New: Lift-slide fittings HS-Master

G.U-Premiere 2004 The new convenience for sophisticated living areas: Lift-slide fittings HS-Master combined with the proven

ATS drive technology Advantages: Ease of operation – lifting and opening to the desired position as well as closing are effected by motor. Very simple operation.

Various modes of operation – via push-button, remote control or door handle.

Range of application*: Scheme A SW/sash width -3.300 mm SH/sash height -2.750 mm up to 250 kg sash weight Delivery : Complete unit pre-mounted and made-to-measure.

* Lift-slide units already

installed with the fittings G.U-933 (timber or PVC) can be retrofitted with HS-Master by exchanging gear and runners.

Available for timb aluminium er, PVC and units

Suitable for "barriere free construction" 4

Security fittings for lift-slide doors

"More security and convenience" with lift-slide units

Meeting stile gasket Se – tested to ENV 1627 for resistance class 2

There is an increasing demand on both the security and ease of operation of doors. Due to their compact construction and robust fittings, Lift-slide doors generally provide a high protection against burglary. In addition, the anti-burglary effect can be progressively increased by the use of security components such as – Handles Se, lockable – Bottom keeper and locking bolts for slit ventilation

With the meeting stile gasket Se an increased protection against burglary is achieved; robust aluminium profiles engage into one another thus preventing the door from being seperated.

Application for timber and PVC lift-slide doors: – Sash clearance 10 mm for timber – Sash clearance 16 - 20 mm / 22 - 24 mm – Sash clearance 25 - 29 mm / 30 - 33 mm

New: Anti-lift security device in the sliding sash

Further advantage: thermal break.

Meeting stile gasket Se Sash clearance 16-20 mm

1 Anti-lift security device 2 Meeting stile gasket Se

3 Handle Se, lockable 4 Bottom keeper and locking bolt 5

Top guides, tubular threshold G.U-thermostep

Top guides P 903, P 739 / P 740 P 903 for lift-slide and lift-tilt-slide doors with identical timber profile cross sections.

Top guide P 903: Sash thickness 56 up to 92 mm P 739 / P 740 for lift-slide sashes Top guide P 739: Sash thickness up to 60 mm Top guide P 740: Sash thickness up to 70 mm

Gliding rail P 903

Gliding rail P 739

Thermally broken tubular threshold G.U-thermostep for timber and PVC lift-slide and lift-tilt-slide doors The thermal break of the tubular threshold G.U-thermostep considerably reduces the heat flow at the bottom of glazed lift-slide and lift-tilt-slide doors.

The effect of thermal break: With normal interior air conditions – room temperature + 20° C, relative air humidity 50 % – condensation forms with a surface temperature of approximately + 9,2° C (dew point temperature).

An effective thermal break will achieve with normal outside temperatures (down to - 15° C in winter) a surface temperature clearly higher than + 9,2° C. Thus the formation of condensation will be prevented, the bottom area of the door will not suffer from moisture, a sound building structure will be protected and preserved.

Isotherms on the sliding sash

Isotherms on the fixed glazing

Range of applications G.U-thermostep: The tubular threshold programme offers versions for timber elements with a sash clearance of 28 and 10 mm timber thickness of 56 and 68 mm all leading PVC profile systems various schemes of sash arrangement

Tubular threshold G.U-thermostep / flat running rail, scheme A

Tubular threshold G.U-thermostep / upstanding running rail, scheme A

Suitable for "barriere free construction"

Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Straße 3 D-71254 Ditzingen Phone 07156 301-0 Fax 07156 301-454 www.g-u.de

6

GB 382 03.04 HTD

Printed in Germany

Parallel slide and tilt fittings, slide-fold fittings The G.U programme for timber, PVC and aluminium windows and patio doors

The G.U parallel slide and tilt programme...

G.U parallel slide and tilt fittings offer technically mature solutions for PVC, timber and aluminium windows and patio doors: G.U-966 (PVC, timber) and G.U-968 (for aluminium) for large units with 2 or 4 sashes; G.U-90 for small and lightweight window and patio door units both in residential and project construction.

Technical specification of the current programme

G.U-966/ 200 mZ

G.U-966/ 150 mZ

G.U-968/ 200 mZ

G.U-968/ 150 mZ

G.U-966/ 150 oZ

G.U-968/ 150 oZ

G.U-90 oZ

Sash weight in kg Sash rebate width in mm Sash rebate height in mm Basic security Enhanced basic security ENV 1627 – WK 2

up to 200 720 – 2000 820 – 2370

up to 150 720 – 1600 820 – 2370

up to 200 740 – 2000 895 – 2400

up to 150 740 – 1600 895 – 2400

up to 130 700 – 1600 700 – 2350

up to 130 600 – 1600 730 – 2400

up to 90 700 – 1600 700 – 2350

Innovative runner technology With its newly designed cam segment, the G.U runner smoothly and accurately glides from sliding position into tilt position.

2

Convenient assembly with “Cleverle” All locking points of the G.U-90 oZ fittings are designed as automatic mushroom pin “Cleverle” which cleverly adjusts itself to the rebate clearance thus providing immediate compensation of possible inaccuracies.

Individual security levels Parallel slide and tilt fittings for timber and PVC units come in three different security classes.

Special security components ensure that the locking mechanism is burglary-resistant on all four sash sides.

Surface protection ferGUard*silver G.U parallel slide and tilt fittings come with the high-quality surface sealing ferGUard*silver providing intensive and permanent protection against corrosion.

...allows for high functionality and convenient operation

Convenient operation All units equipped with G.U parallel slide and tilt fittings can be opened and closed with ease.

The ergonomically shaped turn handle operates all functions.

Lockable handle G.U mZ

Scheme A – with mullion 1 parallel slide and tilt door, 1 fixed glazing; illustration: lh assembly

Handle G.U mZ, with profile cylinder

Handle G.U mZ, with profile cylinder, stainless steel

Scheme A – with mullion [1] 1 parallel slide and tilt door, 1 side hung door; illustration: lh assembly

Scheme D – without mullion [2] 1 parallel slide and tilt door, 1 side hung door; illustration: lh assembly

§

Scheme C – with mullion 2 parallel slide and tilt doors, 2 fixed glazings; illustration: lh assembly of active sash

Scheme C – with mullion [1] 2 parallel slide and tilt doors, 2 side hung doors; illustration: lh assembly of active sash

Sliding position On being released from the tilt position, the sliding sash stands parallel and is slid sideways.

Scheme K – with mullion 2 parallel slide and tilt doors, 1 fixed glazing; illustration: lh assembly and rh assembly

Scheme G – with mullion 1 parallel slide and tilt door, 2 fixed glazings; illustration: lh assembly

Scheme G – with mullion [1] 1 parallel slide and tilt door, 2 side hung doors; ill: lh assembly

§

Caption: [1] Schemes A, C and G with side hung sash: side hung sash fittings UNI-JET, with removable handle DIRIGENT-F/SG 8-00694-33-0-* and Rosette/F, inside – flat 6-24913-00-0-* [2] Scheme D: Side hung sash with rebate shoot bolt UNI-JET

Tilt position During ventilation the sash is securely held open via the stay arms even with heavy wind; it is prevented against sideways movement.

Closed position The central locking system provides for the peripheral locking of the sash.

3

G.U-966 (PVC, timber) – G.U-968 (aluminium) Stay arms with forced control (driven tilt), types 200 mZ and 150 mZ

Forced control

With their driven stay arms, the fitting types mZ provide utmost ease of operation as well as secure and reliable functioning of large and heavy patio door leaves.

The innovative design of the runners distinguishes itself by the soft run in curve of the cam segment allowing the end of the sash to run smoothly.

Moreover, the sliding sashes move easily and accurately to any position desired.

With the ergonomically shaped aluminium handle every function of the door is controlled: G.U-966/200 mZ, PVC Releasing the central lock and setting off the sash; releasing from tilt position, sliding the sash open and closed; pulling the sash closed and locking it at the same time.

The turn handles come with anti-lockout device, or as lockable handle with profile cylinder for operation from one or both sides.

Optimum protection against corrosion with the surface sealing ferGUard*silver

Both fitting types have driven stay arms (forced control via turn handle) pressing the sash to the frame over its total width when closing, and pushing it off the frame evenly when opening.

Ideal for large and heavy sashes.

G.U-966 (PVC, timber) When being closed, the sash automatically and gently engages in tilt position.

It is then secure against being moved sidewards.

G.U-966/200 mZ, PVC

G.U-968 (aluminium) The fitting components are made of high-quality steel, zinc die cast and aluminium alloys; aluminium sash profiles with Euro groove 15/20 mm.

The sliding sash automatically engages into tilt position and is then secure against being moved sidewards.

Closed position

Tilt and slide position

Slide release

G.U-968/200 mZ, aluminium Technical specification Sash weight, kg Sash rebate width, mm Sash rebate height, mm Opening width in mm [2] 4

G.U-966/ 200 mZ [1] up to 200 720 – 2000 820 – 2370 118

G.U-966/ 150 mZ up to 150 720 – 1600 820 – 2370 118

G.U-968/ 200 mZ [1] up to 200 740 – 2000 895 – 2400 108

G.U-968/ 150 mZ up to 150 740 – 1600 895 – 2400 108

[1]

From SRW 1850 – 2000 mm an additional middle stay is recommended.

From SRW 1600 – 2000 mm and for sash weights 180 – 200 kg the use of tandem runners is recommended.

[2]

Opening width in mm incl. sash overlap thickness of 16 mm.

All-around-security fittings for windows and patio doors G.U-966/200 mZ Se – G.U-966/150 mZ Se

Basic security = G.U standard Corner transmissions with mushroom shaped locking pins provide additional security for the protection of the lower section of the window or patio door with particular risks.

Mushroom shaped locking pins hook behind the security locking plates and provide increased burglar protection.

Corner transmissions with mushroom pins

Enhanced basic security Stays with mushroom pins

The use of further security components and the corresponding security locking plates additionally increases the burglar protection.

Parallel slide and tilt fittings for enhanced basic security are equipped with mushroom shaped locking pins on stay arms corner transmissions.

From basic security to WK 2: G.U offers solutions for all security requirements The range of parallel slide and tilt fittings “with forced control” comes in several security levels.

Particular security components make the locking mechanism all around burglar resistant.

Locking mechanism monitoring for the release of alarm installations Units equipped with G.U parallel slide and tilt fittings can generally be connected to an alarm installation.

Corner transmissions with mushroom pins

Tested security according to ENV 1627 – WK 2 Stays with mushroom pins

Steel security fittings for increased burglar protection. Parallel slide and tilt fittings tested to ENV 1627 – WK 2 are equipped with mushroom shaped locking pins on stay arms, corner transmissions, gears and additional centre gears.

Middle locks vertical and horizontal with mushroom pins

Corner transmissions with mushroom pins

5

G.U-966 (PVC, timber) – G.U-968 (aluminium) Stay arms without forced control (non driven tilt), type 150 oZ

The locking system oZ has non driven stay arms which from a sash rebate width of 1200 mm are connected in a way that the whole sash is pressed towards the frame evenly across its full length. The robust design of the fittings allows for the faultless functioning of smaller and medium-sized window and patio door units with the best running quality.

The innovative design of the runners distinguishes itself by the soft run in curve of the cam segment allowing the end G.U-966/150 oZ, PVC of the sash to run smoothly.

Moreover, the sliding sashes move easily and accurately to any position desired.

All functions are controlled via turn handle operated with one hand: Release of central locking system, release of tilt position sliding the sash to and fro, pulling in and locking the sash.

Lockable handles (via profile cylinder) for the operation from one or both sides are also available.

Optimum protection against G.U-966/150 oZ, PVC corrosion with the surface sealing ferGUard*silver.

Locking effected with standard tilt-turn locking components.

Closing pressure control On timber, PVC and aluminium units both stay arms are connected with a metal rod ensuring equal closing pressure across the whole sash width. The sash is prevented from warping.

G.U-966 (PVC, timber) When being closed, the sash automatically and gently engages in tilt position.

It is then secure against being moved sidewards.

G.U-968 (aluminium) The fitting components are made of high-quality steel, zinc die cast and aluminium alloys; aluminium sash profiles with Euro groove 15/20 mm.

The locking pins of the locking gear and of the corner transmission (with 4-leaf spring) are adjustable.

The sliding sash automatically engages into tilt position and is then secure against being moved sidewards.

G.U-968/150 oZ, aluminium Technical specification Sash weight, kg Sash rebate width, mm Sash rebate height, mm Opening width in mm [1] [1]

6

G.U-966/ 150 oZ up to 130 640 – 1600 700 – 2350 118

Opening width in mm incl. sash overlap thickness of 16 mm.

G.U-968/ 150 oZ up to 130 640 – 1600 700 – 2350 108

Slide release

Tilt and slide position

Closed position

G.U-90 oZ The new fitting type for light units

Closing pressure control The stays are connected with a metal rod – the closing pressure is evenly transferred over the total sash width.

Convenient assembly with “Cleverle” The automatic locking pin cleverly adjusts itself to the rebate clearance (which in practice is not always ideal) thus saving settings on the sash.

G.U-90 oZ with non driven stay arms is suitable for smaller and light window and patio door units both in residential and project construction. It is also available for the use in combination with double leaf side hung patio doors.

Identical stays and runners for Locking effected with stantimber, PVC and aluminium dard tilt-turn locking compounits. nents.

For sash weights up to 90kg All locking points with automatic pin “Cleverle”.

For sash rebate widths up to All settings with Torx.

1200 [1] or 1600 [2] mm [1] without closing pressure control Parallel slide and tilt fit[2] with closing pressure control tings G.U-90 come with the proven surface sealing Closing pressure control ferGUard*silver providing via rod connection (for sash permanent protection against widths from 1200 mm): corrosion. prevents the door sash from Turn handles for convenient warping. and easy operation: Stylish appearance due to slim – unlocking runners and to the rod being – tilting and sliding open concealed within the gliding – closing and locking rail.

Smooth engagement The sash is slid open to the position desired almost without effort – and it smoothly engages in end position while closing.

7

More comfort of living with slide-fold fittings G.U-922 and G.U-822 with bottom running system...

On slide-fold units with G.U-922 fittings (timber/PVC) or G.U-822 (aluminium), the running rail is mounted at the bottom.

The running rail takes up the sash weight and transmits it to the floor safely. As a result, safe functioning is provided independently of the stability of the building construction at the top – e.g. eaves of conservatories.

Folding sashes with a width up to 900 mm (timber/PVC) or 1000 mm (aluminium) and a weight up to 80 kg are manufactured from tilt-turn profiles.

Provided with peripheral gaskets, the units offer high impermeability as well as optimum heat and sound insulation.

Stylish appearance due to a flat guide rail and to runners concealed under a cover profile.

Slide-fold units come as inward or outward opening versions, applications for 3 to 7 sash units are possible.

Optimum protection against corrosion due to surface sealing ferGUard*silver.

Generous and convenient access out of doors All folding sashes are moved to the side to form a slim package: living room and garden are united to form a new living area in close touch with nature.

Optimal also for frequent use As side hung or tilt-turn sash, the passage door leaf is operated independently of the folding sashes.

Efficient ventilation All 3- to 7-sash units are equipped with a tilt-turn sash serving as passage door leaf. In secured tilt position, this sash offers an additional possibility of aeration (see overview of schemes, page 11).

8

... or with slide-fold fittings G.U-925 and G.U-825 with top running system

On slide-fold units with G.U-925 fittings (timber/PVC) or G.U-825 (aluminium), the running rail is mounted at the top.

Indoors, this type of fittings can optionally be used with flush floor guide, i.e. without a threshold protruding, and is therefore especially suitable for the handicapped and for wheel chair users.

Folding sashes with a width up to 900 mm (timber/PVC) or 1000 mm (aluminium) and a weight up to 80 kg are manufactured from tiltturn profiles.

Ceilings with high load capacity or ruggedly designed eaves allow for the stable fixing of the running rail at the top.

Provided with peripheral gaskets, the units offer high impermeability as well as optimum heat and sound insulation.

Applications for 3 to 7 sash units are possible.

Optimum protection against corrosion due to surface sealing ferGUard*silver.

Open position Moved to the side, the folding sashes demand only little parking space and open up the interior towards garden and terrace.

Passage door leaf in open position As side hung or tilt-turn sash, the passage door leaf is operated independently of the folding sashes.

Ventilation in secured tilt position As tilt-turn type, the passage door leaf on 3- to 7-sash units offers an additional possibility of aeration in secured tilt position.

(See overview of schemes, page 11).

9

Great ease of operation due to best running quality

Elegance and smoothness

Matching design of windows and patio doors

Guides with 2 rollers provide the smooth running of the folding sashes. A stylish appearance is achieved with the flat guide rail.

The folding sashes are moved with utmost ease: The 4-wheel running carriage ensures convenient operation; the small depth of the running rail contributes to the stylish appearance of the unit.

Top-running carriages are concealed behind the guide rail.

Sliding sashes up to 900 mm width (timber/PVC) or up to 1000 mm (aluminium) are manufactured with tilt-turn profiles.

As a result, optimum adaptation of window and patio doors units is achieved providing a harmonious appearance.

Secure fixing Guide rails and running rails are fixed to the frame with screws.

On PVC units, secure fastening is achieved by turning the screws into the steel reinforcement of the profile.

When assembling bottom running systems, the running rail is supported over its total length with a batten to ensure safe carrying of the sash weight.

Settings Guide rollers and runners can be adjusted to various sash overlap dimensions; this is how the fittings are adapted to the particular profile systems.

Hinges join the folding sashes with each other and with the frame.

The position of the sashes towards each other can be adjusted on the hinges by +/-2,5 mm per hinge.

The runners are adjustable by +4/-1,5 mm.

Operation The single handed operation of G.U slide-fold units via turn handle is easy and comfortable.

Lockable gears and handles for operation from both sides are available on request.

Tilt position

Slide position

Closed position

10

Technical specification

G.U-922

G.U-925

G.U-822

G.U-825

Sash weight, kg Sash rebate width, mm Sash rebate height, mm

up to 80 400 – 900 850 – 2350

up to 80 400 – 900 850 – 2350

up to 80 max. 1000 max. 2400

up to 80 max. 1000 max. 2400

Timber, PVC and aluminium slide-fold units and tilt-turn sashes go together beautifully

ยง

ยง

ยง

Scheme 330 2 slide-fold sashes, 1 side hung sash

Scheme 321 [1] 2 slide-fold sashes, 1 tilt-turn sash

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

Scheme 770 6 slide-fold sashes, 1 side hung sash

ยง

ยง

ยง

ยง

ยง

Scheme 633 4 slide-fold sashes, 1 passive side hung, 1 active side hung sash

ยง

Scheme 532 4 slide-fold sashes, 1 side hung sash

ยง

ยง

Scheme 651 [2] 4 slide-fold sashes, 1 passive side hung, 1 active tilt-turn sash

Scheme 550 4 slide-fold sashes, 1 side hung sash

ยง

ยง

Scheme 431 [2] 2 slide-fold sashes, 1 passive side hung, 1 active tilt-turn sash

ยง

ยง

Scheme 541 [1] 4 slide-fold sashes, 1 tilt-turn sash

ยง

ยง

Caption: [1] Passage door leaf also as side hung sash โ with hinges and UNI-JET side hung locking mechanism โ with UNI-JET side hung fittings [2] Active passage door leaf also as side hung sash โ with hinges and UNI-JET side hung locking mechanism โ with UNI-JET side hung fittings

ยง

ยง

ยง

ยง

ยง

ยง

Scheme 761 [1] 6 slide-fold sashes 1 tilt-turn sash

ยง

ยง

ยง

ยง

ยง

ยง

ยง

ยง

Scheme 743 6 slide-fold sashes, 1 side hung sash

11

Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Straße 3 D-71254 Ditzingen Phone +49 7156 301-0 Fax +49 7156 301-293 www.g-u.de

BKS GmbH Heidestraße 71 D-42549 Velbert Phone +49 2051 201-0 Fax +49 2051 201-431 www.bks.de

WP00354-04-1-2

02/2006

Printed in Germany

The programme of Lift-Slide fittings for timber, PVC, and aluminium windows and patio doors

Lift-Slide fittings Slit ventilation module HS-SPEED Limiter HS-Master HS-Master CONCEALED Security components Thresholds

Lift-slide elements ...

Safe and convenient living areas The classic lift-slide fittings from Gretsch-Unitas have always provided for well-lit rooms and a pleasant living atmosphere.

The group of companies now presents a new generation of fittings meeting any demands when it comes to convenient operation, burglar inhibition and variable room ventilation.

All fitting variants boast the following features:

 Gears for sash heights up to  Delightfully easy operation bis 2765 mm even of large and heavy sashes thanks to the perfect  Outstandingly smooth and interplay of running carriages, quiet sash movement due to gear and lever handle an optimised runner design  Lever handle options:  High burglar inhibition as a – inside or inside/outside standard thanks to robust operation fittings – with profile cylinder bore  Extra burglar inhibition by – removable means of optional security – elongated for components barrier-free areas –  Extraordinary thermal break in aluminium, stainless steel the bottom area achieved with or polished brass the G.U-thermostep threshold  Optimum corrosion protection thanks to surface seal ferGUard*silver

For room ventilation the sash can be slid open and lowered at any position – from a small gap to complete opening width. In combination with the slit ventilation module, the door element is tested to burglar resistance grade WK2 even in ventilation position! Opening widths up to 3300 mm are possible.

Overview of the current lift-slide fitting types Timber

Aluminium

Type of element

G.U-934 Door

G.U-934 Window

G.U-937 Door

G.U-937 Window

G.U-934 Door/Window

G.U-934 Door/Window

Sash weight (kg)

up to 300

up to 300

up to 150

up to 150

up to 300

up to 300

Sash width (mm)

700 – 3300

700 – 3300

700 – 2200

700 – 2200

acc. to profile

acc. to profile

Sash height (mm)

1851 – 2765

850 – 1865

1851 – 2765

850 – 1865

acc. to profile

acc. to profile

2 to 6

2 to 4

2 to 6

2 to 4

2 to 4

2 to 4

No. of sashes

2

PVC

Large image on front page and images on page 2 with the kind permission of Oliver Schuster, Visuelle Gestaltung, Stuttgart

providing for bright and spacious rooms

Sash arrangement schemes A to L Scheme A 1 lift-slide sash 1 fixed glazing Drawing shows handle lh

§

Scheme D 2 lift-slide sashes §

§

Comfortable operation with stylish lever handles For operating lift-slide elements, the following handle variants from our series DIRIGENT, RONDO and FORTE are available:  Inside handle, lockable or removable as an option  Inside/outside handle set, lockable on both sides as an option  Aluminium, stainless steel or brass variants depending on the handle series

 Elongated stainless steel handle RONDO with reduced torque for minimal operating effort  Compatible profile cylinders from the BKS range of locking cylinders

§

Scheme E 2 lift-slide sashes 1 fixed glazing Drawing shows handle lh and rh, both sashes opening to the left

§

Scheme C 2 lift-slide sashes 2 fixed glazings §

§

DIRIGENT [1][2][3]

RONDO [2]

Easy retrofitting: All existing handles can be exchanged for a new and different lever handle model at any time!

Scheme F 4 lift-slide sashes §

§

§

FORTE [2]

§

Scheme K 2 lift-slide sashes 1 fixed glazing

DIRIGENT Se, lockable [1][2][3]

RONDO, elongated [2]

Scheme L 4 lift-slide sashes 2 fixed glazings §

§

§

§

Finish: [1] = Aluminium [2] = Stainless steel [3] = Brass

33

WK2-tested slit ventilation module Open for ventilation, yet safe against intrusion

The recently developed slit ventilation system offers convenient room ventilation plus the extra benefit of a burglary protection feature.

Elements fitted with a slit ventilation module are  locked securely even in ventilation position  tested to ENV 1627 for burglar resistance grade WK2  installable in lift-slide units G.U-934 and G.U-937 (timber and various PVC systems) with minimal effort Further features:  Ventilation grid profile made from anodised aluminium, with integral insect mesh  Sealing towards frame and threshold with optimally adapted connectors

The 2-part locking bolts lock the sash firmly also in slit ventilation position, thus protecting the room against burglary during ventilation.

They are fixed through the frame into steel plates on the outside securely.

Enlarged view of insect screen

Closed position: sash is closed and locked

Sliding position with handle at 90° position

In the context of the Architecture and Civil Engineering Innovation Awards having taken place on the occasion of the trade fair BAU 2009, the company group Gretsch-Unitas was awarded a prize for this product.

4

Slit ventilation position: sash is locked

Lift-slide unit with HS-SPEED Limiter Safe operation of large and heavy elements

When a large and heavy lift-slide element is opened or closed, the sash gains momentum due to the built-up kinetic energy and can only be slowed down with difficulty.

The HS-SPEED Limiter prevents the sliding sash from accelerating too fast, thus avoiding personal injury and damage to the property itself.

The system is therefore especially suited for use in buildings with enhanced safety requirements such as, e.g., schools and kindergartens.

Furthers benefits:  The usual operating comfort is not affected  Simple installation  Retrofittable  Suitable for timber, PVC, and aluminium elements

The HS-SPEED Limiter is discretely concealed under a cover profile.

Thanks to sophisticated safety technology, the HS-SPEED Limiter excludes the risk of injuries that might occur when heavy sliding sashes are moved.

The picture shows a transparent cover revealing the mechanism.

Range of application

G.U-934

G.U-937

Max. sash width

3300 mm

2200 mm

Max. sash height

2765 mm

2765 mm

Max. sash weight

400 kg

150 kg

For sash arrangement schemes A, C, G and K.

5

Motor-driven lift-slide fittings HS-Master, scheme A The most convenient way of door opening

Tried-and-tested lift-slide fittings combined with modern drive technology – the HS-Master meets the demand for high-convenience living and provides for barrier-free solutions.  Motor-driven operation: lifting the sash, moving it to the desired opening width, and closing is as easy as anything  Operating options – Wall switch / key switch – Radio remote control – Push and go – Lever handle  The HS-Master features a standard limit switch. Additional safety components such as a light barrier or a light curtain are available as an option.  Suitable for timber, PVC, and aluminium elements  In combination with low thresholds, the easily operable HS-Master is downright predestinated for barrier-free dwellings

Range of application Sash weight (kg)

 Recommended for hospitals, retirement and care homes, and handicapped facilities  Delivered as tailor-made and preassembled drive unit with various options  Simple installation  Existing G.U-934 lift-slide elements can be retrofitted without any problem  The complete system including all safety components is tested by DEKRA  Extremely low noise drive system

HS-Master scheme A up to 300

Sash rebate width (mm)

950 – 3300

Sash rebate height (mm)

1840 – 2765

6

Screwed to the frame, the HS-Master drive mechanism does not protrude into the door lintel.

With its unobtrusive appearance thanks to the small installation height of 100 mm, the drive system does not interfere in any way with a room's interior design.

Motor-driven lift-slide fittings HS-Master, scheme C Great ease of operation also for 2-sash elements

Sash lifting, sliding and closing with the proven HS-Master technology. Offering convenient passage thanks to very large opening widths, this lift-slide fitting system is ideally suited for "Accessible Dwellings" to DIN 18025.  Sophisticated safety technology guarantees for outstandingly safe operation.

Light barrier, light curtain, or radar sensors are available as an option.  The operating options are the same as with scheme A, and equally quiet

Range of application Sash weight (kg)

 Sensitive speed and force regulation  The complete system including all safety components is tested by DEKRA

HS-Master scheme C up to 300

Sash rebate width (mm)

950 – 3300

Sash rebate height (mm)

1840 – 2765

7

Motor-driven lift-slide fittings HS-Master CONCEALED for sophisticated living areas

Another trendsetting highlight in our range of motor-driven lift-slide fittings is the new type HS-Master CONCEALED which is installed in the profile.

The exceptional feature of this system is the fact that the drive unit is completely integrated in the frame profile, whilst the linkage is concealed in the profile of the sliding sash.  This concealed solution meets the highest demands with regard to design and appearance  Naturally, the CONCEALED type offers the same benefits as the conventional HS-Master such as, e.g., suitability for barrierfree dwellings, easy and convenient operability and, last but not least, very simple installation: the drive system comes as a made-to-measure and pre-assembled set.  Range of application: – Max. sash width 3300 mm – Max. sash height 2765 mm – Max. sash weight 300 kg  For timber elements  For aluminium elements on request

8

The complete system including all safety components is tested

by DEKRA.

Individually enhanced burglar protection with additional optional security components

1 Anti-lift security device

5 Meeting stile gasket Se

protects the sash from being lifted by force

2 Lock monitoring with magnetic switch

Windows and doors constitute the weak spots in a building unless they are fitted with adequate security components. Insufficiently secured windows and doors make it easy for unwelcome visitors to intrude into the house.

Half of all burglar attempts made on window and door elements with robust security fittings are abandoned within a few minutes.

The police therefore recommend burglar inhibiting fittings as the most efficient safeguard against housebreakers.

With the security components listed below it is possible to upgrade lift-slide elements in order to make them comply with today's security requirements: 1 2 3

4 Lever handle Se Lockable gear PZ

4 5

Anti-lift security device Magnetic switch (lock monitoring) Bottom keeper Lever handle Se, lockable Meeting stile gasket Se

Slit ventilation module, WK2-tested Sash is locked even in ventilation position

3 Bottom keeper Detent for slit ventilation module

Security gasket Se for the meeting stile The meeting stile gasket Se provides enhanced burglar inhibition: robust aluminium profiles engaging into one another prevent the sashes from being lifted open by force.

Lever handles Lockable handles for inside or inside/outside operation can be mounted subsequently at any time, as the lift-locking gears are prepared for actuation via profile cylinder as a standard.

Lock monitoring Simple upgrade with magnetic switch possible for all gears with mark.

9

Thermally broken threshold G.U-thermostep Energy-efficient · barrier-free · retrofittable

The thermally broken threshold G.U-thermostep considerably reduces the heat flow at the bottom of lift-slide elements of timber and PVC, thus saving a considerable amount of energy.  The complete outside (weather side) is protected by an aluminium profile  Flexible modular system: threshold, variety of drip rails and running rails for snap-in attachment  Anti-moisture foil attached directly to the drip rail  Identical base profile for timber and PVC elements  All running rails can be exchanged subsequently  Suitable for barrier-free living

 Range of application: G.U-thermostep thresholds come in variants for – timber elements with 28 mm and 10 mm sash clearance – timber profile thicknesses 56 and 68 mm – timber profile thickness 88 mm with threshold extension – all market-leading PVC profile systems and various sash arrangement schemes

Low running rail

High running rail

Exterior temperature -15 °C

Isotherms +10 °C

Interior temperature +20 °C

Isotherms of G.U-thermostep, scheme A – sliding sash

Exterior temperature -15 °C

10

The G.U-thermostep 'Comfortprofil' enables to turn a G.U-thermostep threshold with a 15 mm running rail into a barrier-free threshold.  Lift-slide elements already installed can be retrofitted without any effort.  The special benefit of this product is its fast and secure installation  'Comfortprofil' is designed for use with timber and PVC units

Maximized user convenience with G.U-thermostep 'Comfortprofil'

Isotherms +10 °C

Interior temperature +20 °C

Isotherms of G.U-thermostep, scheme A – fixed sash

Thermally broken threshold G.U-thermostep Energy-efficient and barrier-free units also with schemes E and L

Even in the case of lift-slide units requiring a third track to accomodate two or four movable sashes (= 2/3 opening width), it is possible to achieve an extraordinary thermal break and save a lot of energy.

The extended installation depth of G.U-thermostep is obtained by means of an extension profile.

Isotherms of G.U-thermostep scheme E / L – fixed sash

Exterior temperature -15 °C

Isotherms +10 °C

Sash arrangement scheme L

Isotherms of G.U-thermostep scheme E / L – central sash

Interior temperature +20 °C

Tmin: 10,58 °C, f(0,13) = 0,73

All benefits of the proven G.U-thermostep threshold are maintained Variable composition of different tread threshold, drip rail and running rail types, all assembled in convenient snapin technique Suitable for timber and PVC sash profiles up to a thickness of 88 mm Simple installation Suitable for barrier-free construction

Exterior temperature -15 °C

Isotherms +10 °C

Interior temperature +20 °C

Tmin: 11,24 °C, f(0,13) = 0,75

Tmax: 19,72 °C

Tmax: 18,82 °C

Sash arrangement scheme E

11

Alternative threshold system for lift-slide elements

G.U-threshold 47  Small installation height of 47 mm  Suitable for timber and PVC doors  Including drip rail  For up to 68 mm profile thickness

G.U-flatstep  Small installation height of 22 mm  Suitable for timber and PVC doors  For up to 68 mm profile thickness

G.U-timberstep  Small installation height of 22 mm  Suitable for timber doors  For up to 78 mm thick timber profiles

Special features of the threshold system  Threshold-to-frame connectors and other accessories are compatible with all threshold types presented here  Exchangeable running rail  Due to their small installation height, the thresholds are especially useful in the context of reusing existing buildings  Sash clearance 28 and 10 mm  Various sash arrangement schemes

Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str. 3 D-71254 Ditzingen Phone + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-2 93 www.g-u.com

BKS GmbH Heidestr. 71 D-42549 Velbert Phone + 49 (0) 20 51 2 01-0 Fax + 49 (0) 20 51 2 01-4 31

WP00382-04-1-2

02/2010

Printed in Germany

Order Catalogue Supplement Builder's hardware for timber and PVC windows and patio doors

2

H/K ! NNOVATION

NEW & EXCLUSIVE AT G.U-BKS

Parallel slide and tilt fittings flush with the floor – barrier free

Edition 03.2010

Quality: G.U successfully certified

Qualité: G.U certifié avec succès La norme DIN ISO 9001 définit les exigences à la structure et le mode de travail de l’entreprise et de sa gestion de qualité.

Qualität: G.U erfolgreich zertifiziert DIN ISO 9001 definiert die Anforderungen an die Struktur und Arbeitsweise des Unternehmens und seines Qualitätsmanagements.

En 1995 le comité AGQS e.V. a certifié l’introduction avec succès d’un système de management de qualité conforme à la norme DIN ISO 9001 dans la Société Gretsch-Unitas GmbH Baubeschläge.

La fabrication de produits de qualité est un but permanent pour G.U. Le certificat confirme que la coopération interne de la Société – du développement des produits jusqu’à la distribution et le service pour les clients – correspond également à ce but.

Quality: G.U successfully certified

1995 bescheinigte die AGQS e.V. der Gretsch-Unitas GmbH Baubeschläge die erfolgreiche Einführung eines Qualitätssicherungssystems entsprechend DIN ISO 9001.

Die Herstellung von Qualitätsprodukten ist für G.U ein beständiges Anliegen.

Die Zertifizierung bestätigt, dass auch die betriebsinternen Abläufe – von der Entwicklung bis zum Vertrieb und Kundenservice – mit diesem Anliegen übereinstimmen.

DIN ISO 9001 defines the requirements to structure and working methods of the enterprise and its quality management.

In 1995 the committee AGQS e.V. has certified the successful introduction of a quality management system according to DIN ISO 9001 in the company Gretsch-Unitas GmbH Baubeschläge.

The production of quality hardware is a permanent concern for G.U. The certificate confirms that the internal cooperation of the company – from product development to distribution and customer‘s service – also corresponds to this concern.

2

Edition 03.2010

Product information and product liability Parallel slide and tilt fittings G.U-966/100 oZ bb – flush with the floor

Maximum use of space and living comfort Mounted flush with the floor level, the parallel slide and tilt system G.U-966/100 oZ offers extra living comfort. Not only children, the elderly, or wheelchair and walking frame users, but everyone to whom convenient living is important will appreciate passing through a patio door without tripping hazard.

Naturally, this new fitting type offers all the benefits of the standard parallel slide and tilt system such as, e.g., simple one-handle operation and upgradable security with additional burglary inhibiting components.

■ Usable for all standard timber and PVC profiles (scheme A) ■ Unhindered passage with the low G.U threshold DKS complying with the requirements of "Accessible Dwellings" to DIN 18025.

■ Easy operation via lever handle, same operating principle as that of the standard parallel slide and tilt fittings from G.U. ■ Same central locking mechanism as with all G.U parallel slide and tilt "oZ" systems.

Suitable for barrier-free construction

Runners, profiles and accessories

Application of G.U-966/100 oZ bb: ■ 2-sash parallel slide and tilt door elements ■ 2-sash parallel slide and tilt window elements with running rails and gliding rails, each.

Locking mechanisms: Parallel slide and tilt locking gear G.U-966/100 oZ bb The locking mechanism G.U-966/100 oZ bb features one-handle operation, the parallel offset of the sliding sash is 118 mm. The gears come with 15 mm backset for handle DIRIGENT [1], or as lockable gears with 25 to 50 mm backset and profile cylinder bore.

All locking parts are designed for a 16 mm fitting groove. The locking pins of gear and corner transmission are adjustable.

From sash rebate widths over 851 mm and sash rebate heights over 751 mm, additional centre locks are used.

The corner transmissions are provided with rust-proof 4-leaf stainless steel springs.

SRW 650-1600 mm, SRH 700-2350 mm.

Parallel slide and tilt fittings G.U-966/100 oZ bb Floor-flush parallel slide and tilt fittings with 4-wheel carriages running at the top and clamp fixed connecting rods for windows and patio doors with sash widths SW from 640 to 1600 mm, sash heights SH from 700 to 2350 mm, and sash weights up to 100 kg.

Wheels consisting of deep groove ball bearings with plastic sheathing.

In combination with G.U floor threshold DKS (installation height < 20 mm) ideally suited for barrier-free construction.

The basic product information can be found in the order catalogues "H" (Timber – WP00020-04-1-1, edition 09.2009) and "K" (PVC – WP00030-04-1-1, edition 09.2009), pages 1.13 to 1.16, each.

[1] Further handle types can be found in the order catalogues "H" (Timber) and "K" (PVC), chapter 3 each.

Contents Locking plates and positioning plates

Locking gears Locking gear D 15 Locking gear AP, lockable

4 5

Runners, profiles and accessories G.U-966/100 oZ bb

Edition 03.2010

6

Locking plates and positioning plates for DKS thresholds Adapters for locking plates and positioning plates for DKS thresholds Important advice

7 7 7

3

2

Parallel slide and tilt fittings G.U-966/100 oZ bb Handle inside – gear 15, groove position 9 and 13 Centre gear, horizontal Locking plate acc. to profile

Corner transmission Locking plate acc. to profile

Locking plate acc. to profile Corner transmission

Locking plate acc. to profile Gear 15 GK

DIRIGENT-F Countersunk screws

Corner transmission front 6-32918-00-0-1 Locking plate Se for threshold DKS

Fitting requirements according to size of sashes for scheme A Qty. Description PU A 1 Box of corner transmission, front/rear 1 2 Corner transmission 1 ML 1 1 Handle DIRIGENT-F [1] 20 2 Countersunk screw M 5 x 40 400 1 Gear 15 GK SRH Forend ML GV/G 700- 750 430 295-375 1 751- 850 880 1 375-600 1 851-1100 940 1 400 1 1101-1350 1190 1 500 1 1351-1600 1440 2 600 1 1601-1850 1690 3 600 1 1851-2100 1940 3 980 1 2101-2350 2190 4 980 1 1 Centre gear, vertical SRH Forend ML 700- 850 530 1 10 851-1100 780 1 10 1101-1350 1030 1 10 1351-1600 1280 2 10 1601-1850 1530 3 10 1851-2100 1780 3 10 2101-2350 2030 4 10 1 Centre gear, horizontal SRWB Forend/ML Forend/ML 640- 700 415/415/10 701- 850 530/1 415/10 851-1100 780/1 530/1 10 1101-1350 1030/1 780/1 10 1351-1600 1280/2 1030/1 10 2 Positioning plate 20 Locking plate Se for DKS 100 SRW 2 640- 850 3 851-1600 Locking plate 100 SRW SRH 4 640- 700 700- 750 5 751-1350 7 1351-1600 9 1601-2100 11 2101-2350 5 701-1350 700- 750 6 751-1350 8 1351-1600 10 1601-2100 12 2101-2350 6 1351-1600 700- 750 7 751-1350 9 1351-1600 11 1601-2100 13 2101-2350 [1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white (RAL 9016) Note: Max. sash weight 100 kg

Positioning plate acc. to profile

4

Centre gear, horizontal Locking plate Se for DKS

Article No.

K-16922-00-0-1 6-32021-00-0-1 6-28072-**-0-* 9-13255-40-0-1

Centre gear, vertical Locking plate acc. to profile

G-22081-00-0-1 G-22082-00-0-1 G-22124-00-0-1 G-22125-00-0-1 G-22127-00-0-1 G-22128-00-0-1 G-22133-00-0-1 G-22134-00-0-1

6-32494-30-0-1 6-32494-40-0-1 6-32494-50-0-1 6-32494-60-0-1 6-32494-70-0-1 6-32494-80-0-1 6-32494-90-0-1 top 6-26741-00-0-1 6-32494-30-0-1 6-32494-40-0-1 6-32494-50-0-1 6-32494-60-0-1 (acc. to profile) (acc. to profile)

bottom 6-26741-00-0-1 6-26741-00-0-1 6-32494-35-0-1 6-32494-40-0-1 6-32494-50-0-1

(acc. to profile)

Corner transmission rear 6-32919-00-0-1 Locking plate Se for threshold DKS

Positioning plate acc. to profile

Edition 03.2010

Parallel slide and tilt fittings G.U-966/100 oZ bb Handle inside – lockable gear AP, groove position 9 and 13 Centre gear, horizontal Locking plate acc. to profile

Corner transmission Locking plate acc. to profile

2 Locking plate acc. to profile Corner transmission

Locking plate acc. to profile Gear AP GK

Rosette PZ inside Countersunk screws

Fitting requirements according to size of sashes for scheme A Qty. Description PU A 1 Box of corner transmission, front/rear 1 2 Corner transmission 1 ML 1 1 Handle DIRIGENT-F [1] 20 1 Rosette PZ inside [1] 20 4 Countersunk screw M 5 x 40 400 1 Gear AP GK [2] SRH Forend ML GV/G 1851-2100 1940 3 980 1 2101-2350 2190 4 980 1 1 Centre gear, vertical SRH Forend ML 1851-2100 1780 3 10 2101-2350 2030 4 10 1 Centre gear, horizontal SRWB Forend/ML Forend/ML 640- 700 415/415/10 701- 850 530/1 415/10 851-1100 780/1 530/1 10 1101-1350 1030/1 780/1 10 1351-1600 1280/2 1030/1 10 2 Positioning plate 20 Locking plate Se for DKS 100 SRW 2 640- 850 3 851-1600 Locking plate 100 SRW SRH 9 640- 700 1851-2100 11 2101-2350 10 701-1350 1851-2100 12 2101-2350 11 1351-1600 1851-2100 13 2101-2350 [1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white (RAL 9016) [2] * = Backset 25, 30, 35, 40, 45 and 50 mm Note: Max. sash weight 100 kg

Article No. Centre gear, vertical Locking plate acc. to profile

K-16922-00-0-1 6-32021-00-0-1 6-28072-**-0-* K-17205-02-0-* 9-13255-40-0-1

G-22315-**-0-1 G-22316-**-0-1

6-32494-80-0-1 6-32494-90-0-1 top 6-26741-00-0-1 6-32494-30-0-1 6-32494-40-0-1 6-32494-50-0-1 6-32494-60-0-1 (acc. to profile) (acc. to profile)

bottom 6-26741-00-0-1 6-26741-00-0-1 6-32494-35-0-1 6-32494-40-0-1 6-32494-50-0-1

(acc. to profile)

DIRIGENT-F Countersunk screws

Corner transmission rear 6-32919-00-0-1 Locking plate Se for threshold DKS

Corner transmission front 6-32918-00-0-1 Locking plate Se for threshold DKS

Positioning plate acc. to profile

Edition 03.2010

Centre gear, horizontal Locking plate Se for DKS

Positioning plate acc. to profile

5

Runners, profiles and accessories G.U-966/100 oZ bb Doors and windows with sash width SW up to 1600 mm and sash weight up to 100 kg Running rail P 1300 Control part lh 6-34725-00-L-* rh 6-34725-00-R-*

Rod Ø 8 mm Anti-lift security device Guide

Spring-loaded buffer 6-29565-00-0-*

6-34524-00-0-1 6-24764-00-0-1 Support 9-38522-00-0-0

Cover 9-44642-00-R-*

Cover profile P 1602 Cover 9-44642-00-L-*

Runner left right

top – front 6-34521-00-L-0 6-34521-00-R-0

Fitting requirements according to size of sashes for scheme A Qty. Description PU A 1 Box of runners G.U-966/100 oZ bb 1 Contents 1 Top runner – front, 1 Top runner – rear 1 Bottom runner – front, 1 Bottom runner – rear 2 Anti-lift security device 1 Bag of control parts G.U-966/100 oZ bb [1] 1 Contents 1 spring-loaded buffer, 1 standard control part, 1 control part "bb" 1 Adapter for gliding rail P 1771 1 Bag of profiles G.U-966/100 oZ bb [1] Contents 2 Rod Ø 8 mm, 1 running rail P 1300 1 Cover rail P 1602, 1 Cover rail P 1773 bottom 1 Gliding rail P 1771, bottom 1 Guide (bag of profiles size 30 and 35) 1 Support (Bag of profiles size 30 and 35) 1 Bag of accessories for G.U-966/100 oZ bb SRW 851-1100 1 1351-1600 1 1 Bottom profile DKU 25 1 Threshold DKS 1.1.0, stock length 6000 mm 5 alternative: Threshold DKS 7.1.0, stock length 6000 mm 5 1 Threshold-to-frame connector DKH (pair) 5 2

Article No. Handle pos. lh K-17678-00-L-0

Handle pos. rh K-17678-00-R-0

K-17679-00-L-*

K-17679-00-R-*

Runner left right

K-17680-25-0-* [2] K-17680-35-0-* [3] 9-42791-00-0-* [4] 6-32326-00-0-1 6-34158-00-0-1 H-01004-00-0-1 Groove 9 9-43106-13-0-1 9-43106-09-0-1

Adapter for positioning place 1 Adapter for locking plate 1 SRW 2 640- 850 3 851-1600 [1] * = Colour: 1 = EV 1, 5 = UC 5, 7 = white (RAL 9016) [2] = Available in colours UC 5 and white [3] = Available in colours EV 1, UC 5 and white [4] = Available in lengths 1200, 2400, 4800 mm Note: Profile-specific threshold-to-mullion connector to be ordered separately; use extension profiles DKS Runner left right

top – rear 6-34523-00-L-0 6-34523-00-R-0

Groove 13 9-43106-13-0-1 9-43106-13-0-1

Runner left right

bottom – rear 6-34519-00-L-0 6-34519-00-R-0

bottom – front 6-34518-00-L-0 6-34518-00-R-0 Bottom profile DKU

Bottom cover rail P 1773

End cap Countersunk screw End cap

9-26687-00-0-* 9-31151-20-R-1 9-44645-00-L-*

Threshold-to-frame connector DKH Threshold DKS 1.1.0

6

Support 9-44644-01-0-0 Rod Ø 8 mm

Adapter for positioning plate

End cap 9-44645-00-L-*

Adapter for locking plate

Adapter, gliding rail P 1771 Control part bb lh 6-34741-00-L-* rh. 6-34741-00-R-*

Edition 03.2010

Locking plates and positioning plates

Mushroom pin locking plate

Positioning plate

Locking plates and positioning plates for DKS threshold Description Mushroom pin locking plate Mushroom pin locking plate Positioning plate Positioning plate

Groove position 9 13 9 13

Article No. 6-32207-18-0 6-32584-00-0 9-44573-00-0 9-44572-00-0

Adapters for locking plates and positioning plates for DKS threshold Description Groove position Adapter for mushroom pin locking plate 9 Adapter for mushroom pin locking plate 13 Adapter positioning plate 13

Article No. 9-43106-09-0 9-43106-13-0 9-43106-13-0

2

The profile-specific locking plates for timber and PVC joinery are to be taken from the order catalogues "Builder's Hardware for timber windows and patio doors (H)" and "Builder's Hardware for PVC windows and patio doors (K)".

Important advice: All specifications required for ordering DKS thresholds and accessories can be found in the catalogues "Builder's Hardware for timber windows and patio doors" (H), edition 09.09 page 2.96 et seq., and "Builder's Hardware for PVC windows and patio doors (K), edition 09.09, page 2.86 et seq.

Edition 03.2010

Advice on mounting G.U-966/100 oZ bb fittings: ■ For timber joinery refer to drawing No. 0-44964 ■ For PVC joinery refer to drawing No. 0-45399

7

Gretsch-Unitas GmbH Baubeschl채ge Johann-Maus-Str. 3 D-71254 Ditzingen Phone +49 (0)7156 301-0 Fax +49 (0)7156 301-293

www.g-u.com

BKS GmbH Heidestr.

D-42549 Velbert Phone +49 (0)2051 201-0 Fax +49 (0)2051 201-431

WP00352-04-1-2

03/2010

Printed in Germany

Parallel slide and tilt fittings, slide-fold fittings The G.U programme for timber, PVC and aluminium windows and patio doors

Parallel slide and tilt fittings Slide-fold fittings

The G.U parallel slide and tilt programme...

G.U parallel slide and tilt fittings offer technically mature solutions for PVC, timber and aluminium windows and patio doors: G.U-966 (PVC, timber) and G.U-968 (for aluminium) for large units with 2 or 4 sashes; G.U-90 for small and lightweight window and patio door units both in residential and project construction.

Suitable for barrier free construction

Technical specification of the current programme

G.U-966/ 200 mZ

G.U-966/ 150 mZ

G.U-968/ 200 mZ

G.U-968/ 150 mZ

G.U-966/ 150 oZ

G.U-968/ 150 oZ

G.U-90 oZ

Sash weight in kg

up to 200

up to 150

up to 200

up to 150

up to 130

up to 130

up to 90

Sash rebate width in mm

720 – 2000

720 – 1600

720 – 2000

720 – 1600

640 – 1600

600 – 1600

700 – 1600

Sash rebate height in mm

820 – 2370

820 – 2370

820 – 2370

820 – 2370

700 – 2350

730 – 2400

700 – 2350

Basic security

n

n

Enhanced basic security

n

n

ENV 1627 – WK 2

n

n

Innovative runner technology With its newly designed cam segment, the G.U runner smoothly and accurately glides from sliding position into tilt position.

2

Convenient assembly with “Cleverle” All locking points of the G.U-90 oZ fittings are designed as automatic mushroom pin “Cleverle” which cleverly adjusts itself to the rebate clearance thus providing immediate compensation of possible inaccuracies.

Individual security levels Parallel slide and tilt fittings for timber and PVC units come in three different security classes.

Special security components ensure that the locking mechanism is burglary-resistant on all four sash sides.

Surface protection ferGUard*silver G.U parallel slide and tilt fittings come with the high-quality surface sealing ferGUard*silver providing intensive and permanent protection against corrosion.

...allows for high functionality and convenient operation

Convenient operation All units equipped with G.U parallel slide and tilt fittings can be opened and closed with ease.

The ergonomically shaped turn handle operates all functions.

Lockable handle G.U mZ

Scheme A – with mullion 1 parallel slide and tilt door, 1 fixed glazing; illustration: lh assembly

Handle G.U mZ, with profile cylinder

Handle G.U mZ, with profile cylinder, stainless steel

Scheme A – with mullion [1] 1 parallel slide and tilt door, 1 side hung door; illustration: lh assembly

Scheme D – without mullion [2] 1 parallel slide and tilt door, 1 side hung door; illustration: lh assembly

Scheme C – with mullion 2 parallel slide and tilt doors, 2 fixed glazings; illustration: lh assembly of active sash

Scheme C – with mullion [1] 2 parallel slide and tilt doors, 2 side hung doors; illustration: lh assembly of active sash

Sliding position On being released from the tilt position, the sliding sash stands parallel and is slid sideways.

Scheme K – with mullion 2 parallel slide and tilt doors, 1 fixed glazing; illustration: lh assembly and rh assembly

Scheme G – with mullion 1 parallel slide and tilt door, 2 fixed glazings; illustration: lh assembly

Scheme G – with mullion [1] 1 parallel slide and tilt door, 2 side hung doors; ill: lh assembly

Caption: [1] Schemes A, C and G with side hung sash: side hung sash fittings UNI-JET, with removable handle DIRIGENT-F/SG 8-00694-33-0-* and Rosette/F, inside – flat 6-24913-00-0-* [2] Scheme D: Side hung sash with rebate shoot bolt UNI-JET

Tilt position During ventilation the sash is securely held open via the stay arms even with heavy wind; it is prevented against sideways movement.

Closed position The central locking system provides for the peripheral locking of the sash.

3

G.U-966 (PVC, timber) – G.U-968 (aluminium) Stay arms with forced control (driven tilt), types 200 mZ and 150 mZ

Forced control

With their driven stay arms, the fitting types mZ provide utmost ease of operation as well as secure and reliable functioning of large and heavy patio door leaves. n The innovative design of the runners distinguishes itself by the soft run in curve of the cam segment allowing the end of the sash to run smoothly.

Moreover, the sliding sashes move easily and accurately to any position desired. n With the ergonomically shaped aluminium handle every function of the door is controlled: G.U-966/200 mZ, PVC Releasing the central lock and setting off the sash; releasing from tilt position, sliding the sash open and closed; pulling the sash closed and locking it at the same time. n The turn handles come with anti-lockout device, or as lockable handle with profile cylinder for operation from one or both sides. n Optimum protection against corrosion with the surface sealing ferGUard*silver

Both fitting types have driven stay arms (forced control via turn handle) pressing the sash to the frame over its total width when closing, and pushing it off the frame evenly when opening.

Ideal for large and heavy sashes.

G.U-966 (PVC, timber) When being closed, the sash automatically and gently engages in tilt position.

It is then secure against being moved sidewards.

G.U-966/200 mZ, PVC

G.U-968 (aluminium) The fitting components are made of high-quality steel, zinc die cast and aluminium alloys; aluminium sash profiles with Euro groove 15/20 mm.

The sliding sash automatically engages into tilt position and is then secure against being moved sidewards.

Closed position

Tilt and slide position

Slide release

G.U-968/200 mZ, aluminium Technical specification

G.U-966/ 200 mZ [1]

G.U-966/ 150 mZ

G.U-968/ 200 mZ [1]

G.U-968/ 150 mZ

Sash weight, kg

up to 200

up to 150

up to 200

up to 150

Sash rebate width, mm

720 – 2000

720 – 1600

720 – 2000

720 – 1600

Sash rebate height, mm

820 – 2370

820 – 2370

820 – 2370

820 – 2370

118

118

111

111

Opening width, mm 4

[1]

From SRW 1850 – 2000 mm an additional middle stay is recommended.

From SRW 1600 – 2000 mm and for sash weights 180 – 200 kg the use of tandem runners is recommended.

All-around-security fittings for windows and patio doors G.U-966/200 mZ Se – G.U-966/150 mZ Se

Basic security = G.U standard Corner transmissions with mushroom shaped locking pins provide additional security for the protection of the lower section of the window or patio door with particular risks.

Mushroom shaped locking pins hook behind the security locking plates and provide increased burglar protection.

Corner transmissions with mushroom pins

Enhanced basic security Stays with mushroom pins

The use of further security components and the corresponding security locking plates additionally increases the burglar protection.

Parallel slide and tilt fittings for enhanced basic security are equipped with mushroom shaped locking pins on stay arms corner transmissions.

From basic security to WK 2: G.U offers solutions for all security requirements The range of parallel slide and tilt fittings “with forced control” comes in several security levels.

Particular security components make the locking mechanism all around burglar resistant.

Locking mechanism monitoring for the release of alarm installations Units equipped with G.U parallel slide and tilt fittings can generally be connected to an alarm installation.

Corner transmissions with mushroom pins

Tested security according to ENV 1627 – WK 2 Stays with mushroom pins

Middle locks vertical and horizontal with mushroom pins

Steel security fittings for increased burglar protection. Parallel slide and tilt fittings tested to ENV 1627 – WK 2 are equipped with mushroom shaped locking pins on stay arms, corner transmissions, gears and additional centre gears.

Corner transmissions with mushroom pins

5

G.U-966 (PVC, timber) – G.U-968 (aluminium) Stay arms without forced control (non driven tilt), type 150 oZ

The locking system oZ has non driven stay arms which from a sash rebate width of 1200 mm are connected in a way that the whole sash is pressed towards the frame evenly across its full length. The robust design of the fittings allows for the faultless functioning of smaller and medium-sized window and patio door units with the best running quality. n The innovative design of the runners distinguishes itself by the soft run in curve of the cam segment allowing the end G.U-966/150 oZ, PVC of the sash to run smoothly.

Moreover, the sliding sashes move easily and accurately to any position desired. n All functions are controlled via turn handle operated with one hand: Release of central locking system, release of tilt position sliding the sash to and fro, pulling in and locking the sash.

Lockable handles (via profile cylinder) for the operation from one or both sides are also available. n Optimum protection against G.U-966/150 oZ, PVC corrosion with the surface sealing ferGUard*silver. n Locking effected with standard tilt-turn locking components.

Gasket pressure control On timber, PVC and aluminium units both stay arms are connected with a metal rod ensuring equal gasket pressure across the whole sash width. The sash is prevented from warping.

G.U-966 (PVC, timber) When being closed, the sash automatically and gently engages in tilt position.

It is then secure against being moved sidewards.

G.U-968 (aluminium) The fitting components are made of high-quality steel, zinc die cast and aluminium alloys; aluminium sash profiles with Euro groove 15/20 mm.

The locking pins of the locking gear and of the corner transmission (with 4-leaf spring) are adjustable.

The sliding sash automatically engages into tilt position and is then secure against being moved sidewards.

G.U-968/150 oZ, aluminium Slide release

Technical specification

G.U-966/ 150 oZ

G.U-968/ 150 oZ

Sash weight, kg

up to 130

up to 130

Sash rebate width, mm

640 – 1600 600 – 1600

Sash rebate height, mm

700 – 2350 730 – 2400

Opening width in mm 6

118

111

Tilt and slide position Closed position

G.U-90 oZ The new fitting type for light units

Closing pressure control The stays are connected with a metal rod – the closing pressure is evenly transferred over the total sash width.

Convenient assembly with “Cleverle” The automatic locking pin cleverly adjusts itself to the rebate clearance (which in practice is not always ideal) thus saving settings on the sash.

G.U-90 oZ with non driven stay arms is suitable for smaller and light window and patio door units both in residential and project construction. It is also available for the use in combination with double leaf side hung patio doors. n Identical stays and runners for n Locking effected with standard tilt-turn locking compotimber, PVC and aluminium nents. units. n All locking points with auton For sash weights up to 90kg matic pin “Cleverle”. n For sash rebate widths up to All settings with Torx.

1200 [1] or 1600 [2] mm [1] n Parallel slide and tilt fit without gasket pressure control [2] tings G.U-90 come with with gasket pressure control the proven surface sealing n Gasket pressure control via rod ferGUard*silver providing connection (for sash widths permanent protection against from 1200 mm): prevents the corrosion. door sash from warping. n Turn handles for convenient n Stylish appearance due to slim and easy operation: runners and to the rod being – unlocking concealed within the gliding – tilting and sliding open rail.

– closing and locking

Smooth engagement The sash is slid open to the position desired almost without effort – and it smoothly engages in end position while closing.

7

More comfort of living with slide-fold fittings G.U-922 and G.U-822 with bottom running system...

On slide-fold units with G.U-922 fittings (timber/PVC) or G.U-822 (aluminium), the running rail is mounted at the bottom. n The running rail takes up the sash weight and transmits it to the floor safely. As a result, safe functioning is provided independently of the stability of the building construction at the top â&#x20AC;&#x201C; e.g. eaves of conservatories. n Folding sashes with a width up to 900 mm (timber/PVC) or 1000 mm (aluminium) and a weight up to 80 kg are manufactured from tilt-turn profiles. n Provided with peripheral gaskets, the units offer high impermeability as well as optimum heat and sound insulation. n Stylish appearance due to a flat guide rail and to runners concealed under a cover profile. n Slide-fold units come as inward or outward opening versions, applications for 3 to 7 sash units are possible. n Optimum protection against corrosion due to surface sealing ferGUard*silver.

Generous and convenient access out of doors All folding sashes are moved to the side to form a slim package: living room and garden are united to form a new living area in close touch with nature.

Optimal also for frequent use As side hung or tilt-turn sash, the passage door leaf is operated independently of the folding sashes.

Efficient ventilation All 3- to 7-sash units are equipped with a tilt-turn sash serving as passage door leaf. In secured tilt position, this sash offers an additional possibility of aeration (see overview of schemes, page 11).

8

8

... or with slide-fold fittings G.U-925 and G.U-825 with top running system

On slide-fold units with G.U-925 fittings (timber/PVC) or G.U-825 (aluminium), the running rail is mounted at the top. n Indoors, this type of fittings can optionally be used with flush floor guide, i.e. without a threshold protruding, and is therefore especially suitable for the handicapped and for wheel chair users. n Folding sashes with a width up to 900 mm (timber/PVC) or 1000 mm (aluminium) and a weight up to 80 kg are manufactured from tiltturn profiles. n Ceilings with high load capacity or ruggedly designed eaves allow for the stable fixing of the running rail at the top. n Provided with peripheral gaskets, the units offer high impermeability as well as optimum heat and sound insulation. n Applications for 3 to 7 sash units are possible. n Optimum protection against corrosion due to surface sealing ferGUard*silver.

Open position Moved to the side, the folding sashes demand only little parking space and open up the interior towards garden and terrace.

Passage door leaf in open position As side hung or tilt-turn sash, the passage door leaf is operated independently of the folding sashes.

Ventilation in secured tilt position As tilt-turn type, the passage door leaf on 3- to 7-sash units offers an additional possibility of aeration in secured tilt position.

(See overview of schemes, page 11).

9

Great ease of operation due to best running quality

Elegance and smoothness

Matching design of windows and patio doors

Guides with 2 rollers provide the smooth running of the folding sashes. A stylish appearance is achieved with the flat guide rail.

The folding sashes are moved with utmost ease: The 4-wheel running carriage ensures convenient operation; the small depth of the running rail contributes to the stylish appearance of the unit.

Top-running carriages are concealed behind the guide rail.

Sliding sashes up to 900 mm width (timber/PVC) or up to 1000 mm (aluminium) are manufactured with tilt-turn profiles.

As a result, optimum adaptation of window and patio doors units is achieved providing a harmonious appearance.

Secure fixing Guide rails and running rails are fixed to the frame with screws.

On PVC units, secure fastening is achieved by turning the screws into the steel reinforcement of the profile.

When assembling bottom running systems, the running rail is supported over its total length with a batten to ensure safe carrying of the sash weight.

Settings Guide rollers and runners can be adjusted to various sash overlap dimensions; this is how the fittings are adapted to the particular profile systems.

Hinges join the folding sashes with each other and with the frame.

The position of the sashes towards each other can be adjusted on the hinges by +/-2,5 mm per hinge.

The runners are adjustable by +4/-1,5 mm.

Operation The single handed operation of G.U slide-fold units via turn handle is easy and comfortable.

Lockable gears and handles for operation from both sides are available on request.

Tilt position

Slide position

Closed position

10

Technical specification

G.U-922

G.U-925

G.U-822

G.U-825

Sash weight, kg

up to 80

up to 80

up to 80

up to 80

Sash rebate width, mm

400 – 900

400 – 900

max. 1000

max. 1000

Sash rebate height, mm

850 – 2350

850 – 2350

max. 2400

max. 2400

Timber, PVC and aluminium slide-fold units and tilt-turn sashes go together beautifully

Scheme 330 2 slide-fold sashes, 1 side hung sash

Scheme 321 [1] 2 slide-fold sashes, 1 tilt-turn sash

Scheme 770 6 slide-fold sashes, 1 side hung sash

Scheme 633 4 slide-fold sashes, 1 passive side hung, 1 active side hung sash

Scheme 532 4 slide-fold sashes, 1 side hung sash

Scheme 651 [2] 4 slide-fold sashes, 1 passive side hung, 1 active tilt-turn sash

Scheme 550 4 slide-fold sashes, 1 side hung sash

Scheme 431 [2] 2 slide-fold sashes, 1 passive side hung, 1 active tilt-turn sash

Scheme 541 [1] 4 slide-fold sashes, 1 tilt-turn sash

Caption: [1] Passage door leaf also as side hung sash – with hinges and UNI-JET side hung locking mechanism – with UNI-JET side hung fittings [2] Active passage door leaf also as side hung sash – with hinges and UNI-JET side hung locking mechanism – with UNI-JET side hung fittings

Scheme 761 [1] 6 slide-fold sashes 1 tilt-turn sash

Scheme 743 6 slide-fold sashes, 1 side hung sash

11

Gretsch-Unitas GmbH Baubeschläge Johann-Maus-Str. 3 D-71254 Ditzingen Phone + 49 (0) 71 56 3 01-0 Fax + 49 (0) 71 56 3 01-2 93

BKS GmbH Heidestr. 71 D-42549 Velbert Phone + 49 (0) 20 51 2 01-0 Fax + 49 (0) 20 51 2 01-4 31

www.g-u.com

WP00354-04-1-2

06/2009

Printed in Germany