PLCBus Home Automation System English Catalog

Diving Technology

What is PLCbus? PLCbus Protocol encrypted 2-way communication home automation Powerline Control Bus (PLCBUS) is a highly reliable, cost effective, 2-way Communications technology which enables control products to utilize existing power lines for both residential and commercial applications. This protocol for home automation, was developed by ATS in the Netherlands in 2002, the name used initially in the development phase was: Power Line Communication Bus. However during its production and marketing the brand name was adopted PLC-BUS. The system reliability is high > 99.98%. It is different to X-10 products that no any Filter/Repeater needed necessary. And PLCBUS Technology can be distributed up to 64000 different addresses. Alternative powerline communication technologies, either existing or in development are not effective or reliable enough to meet the requirements of the midrange Europe residential market. The PLCBUS technology opens previously untapped overlapping markets in the areas of Home Networking, Lighting Control, HVAC, Home Automation, RF Control, Security, Home Theater, Internet Enabled Control, etc.

Functionalities The 2-way communication signal allows at any moment to know the status of micro-modules, ON or OFF or% Dimmer. In graphical interfaces control (Touchscreens, TVs, PCs or PDAs or Smartphones) you can get an overview of the state apparatus and the generality of the installation. To facilitate the assimilation of this new technology by the market and increase the use of microactuator modules produced based on PLC-BUS technology. The strategy was first to compatible PLC-BUS Radio Frequency receivers so that they can use RF, currently being used in the market by the common X10. This was achieved through the development of a receiver Hybrid Radio Frequency module that commands all remote controllers and X10 RF and distributes the electricity grid in the form of code PLCBUS processed to act on the various components of the system. This allows the cohabitation of the two technologies at the same installation as the PLC BUS signals over the network, do not affect or collide with the X10 signals and vice versa. The general opinion of the users of this technology is unanimous with regard to the reliability and speed of execution of commands.

Applications It can be used as a support network of communication, the wiring installation itself, and this protocol does not imply a substantial change in the electrical architecture of the buildings and provides the chance to make the installation of an automation system in a scalable, this is, specific needs of each function you wish to incorporate in a building at any given time. The implementation of an automation system based on this technology can be done either in buildings under construction or in buildings already completed and does not involve the existence of specific wiring for the communication bus. In lighting, using appropriate modules and devices it allows the cost of electricity management, allied with motion sensors and dusk sensor, the illumination of a division which is empty is no longer turned on. It avoids the discomfort of finding the switch in a dark room, and the outside lights turn on automatically when it gets dark. Energy consumption can be optimized taking into account the presence / absence of people within a division, habits and schedules of each. Plugholes can be designed to allow the installation of lamps and equipment. In the rooms it can be created different kinds of lighting by connecting the lamps to these plugholes. You can still take advantage of the features of the controlled sockets in order to reduce unnecessary spending. These plugholes can be controlled locally or remotely. Warming is the biggest energy consumer in a building; therefore we centralize in our energy management. You can do the scheduling to enable / disable equipment for heating, ventilation or air conditioning maintaining a high level of comfort. Programming can be done in order to turn on the air conditioning just before you get home, keeping an operation according to schedule, presence of people and outside temperature.

Through a system of PLCbus Home Automation, you can control remotely via the Internet, several lighting outdoor elements, interior lighting, plugholes, heating, electric curtains, irrigation channels, open doors / gates, check the status of doors and windows among others. If you are on vacation and found that by mistake there were lighting circuits turned on, electric curtains opened, irrigation channels turned on, simply access the website via the Internet, and act directly on the circuit, connecting or disconnecting them. The same applies to the case of an alarm trigger (gas, intrusion, fire). You can also change the previously established schedule for irrigation systems, heating, outdoor lighting, etc., without needing to call to a service facility.

In short, this first approach to the system PLCbus can retain the following characteristics: • Automation system that uses the power grid and communications network; • System that allows the existence up to 64,000 addresses in the same facility; • System that does not interfere with the architecture of the building; • System that allows the use of equipment to maneuver (push buttons) of any brand or model; • Speed and reliability in the execution of commands; • Possibility of integration with various types of user interface (remote controls, touchscreens, smartphones, PCs, etc; • Several PLCbus system software control, except that the user or installer may use the one that best meet their needs;

Remote Control of Your Entire House Without Rewiring! With our PLCbus controllers, you can now turn off all the lights in the house from your bedside or turno n all the lights with one press to scare away intruders. You can let visitors in without getting up, or do it from your office by phone if you are not at home. You can turn on/off lights, adjust temperature, and turn on music and more automatically by time or by occupancy. Simply plug lamp and appliance modules in to the nearest convenient 220V receptacle and they can be controlled by any PLCbus controller. Remote, PDA control, computer interface, even by telephone (with # 5010E) or security system which can send X10 command (with # 4809E) from anywhere in the home.

Enjoy Your Life!

Wired-in switches can be converted by OLCbus controllability by simply replacing them with the appropriate PLCbus switch. In certain applications you may wish to replace the wall receptacle with PLCbus receptacle. In-line Micromodules are also available for elegant permanently mounted controls. Infrared control of TV/DVD, etc can be integrated with PLCbus control through the use of an IR device controller. This enables you to use any PLCbus controller to turn on or off IR devices in your home. If your use #3023E, also can use any X10 remote control PLCbus system directly. Media Panel provide you a colorful audio/video enjoyment, you can even watch movie in it.

Under is a simplified representation of how PLCbus can be used in the House

MICRO MODULES Key Features: •Two-way Communications. •Light status feedback speed 0.1 second. •64 Brightness levels (PLCbus 100 levels) for incandescent lamp (Dimmer only). •Soft start 0-9 seconds setup for incandescent lamp (Dimmer only). •Code set electronically. •ON/OFF control of load (No dimming for Fluor/ Appliance, with Remote to realize Dim/Bright control). •Different Scenes up to 16 for Micro Modules only. •Be fixed behind your any existing switch. •Extreme small size (43.25x47mm and only 18.9mm thick) for Micro Modules only.

Note:

Works with any mechanical insert model.

Technical Information Model No.

PLCBUS-R 2263E

PLCBUS-R 2264E

PLCBUS-R 2267HE

PLCBUS-R 2268HE

PLCBUS-R 2267HS

Black/Red/Yellow

Black/Red/Yellow Blue/Green

Black/Red

Black/Red/Blue

Black/Red

300W

1x400 3x300

800W(1000W)

800W(1000W)x2

800W(1000W)

Incandescent

Fluor/Appli

Dimmable

Yes

Built-in Filter

Yes

“All Lights on” by set

Yes

Fluor: Yes/ Appli: No

Connection Line Colour Power Load Type Control Load QTY

Scene address QTY

Signal Speed

200 bits/sec

Command/Sec

5 per sec

Reliability

>99.99%

Supply Voltage

230V + 10%, 50Hz

Ambient Temperature

-10ºC to 50ºC (operation)

Dimensions

Extreme small size: 43.25x47x18.9mm; PLCBUS-R 2268HE size: 43.25x47x28.9mm

PLCBUS-R 2264HX Two-Load H-Duty Dimmer DIN Module Functions: • 2 Domotics Circuits PLCBus Dimmer lamps (1.000W x2) • Resistive Load < 8A Electric • Transformer Load < 5A • Inductive Load < 1.5A • Size: 11.5x9.6x 4cm • Coupler phase to three-phase installations • One-phase/ three-phase Noise Absorber • Works with 4825E

S1 Indicador de Luz S1 Botão de Configuração

Terminais de Controlo

Terminais de Conectividade

PLCBUS-R 2268HX2 4-Load H-Duty Appliance DIN Module Functions: • 4 PLCBus Domotics Circuits • Resistive Load < 8A Electric • Transformer Load < 5A • Inductive Load < 1.5A • Size: 11.5x9.6x 4cm • Coupler phase to three-phase installations • One-phase/ three-phase Noise Absorber • Works with 4825E

S1 Indicador de Luz S1 Botão de Configuração

S2 Indicador de Luz

Terminais de Controlo

Terminais de Conectividade

S2 Botão de Configuração

PT SWITCH Key Features: •Two-way communication. •Light status feedback speed in 0.1 second. •100 Brightness levels for incandescent lamp (Dimmer only). •Button chord. •Super high anti-jamming capability. •ON/OFF/DIM/BRIGHT control of load (No dimming for Fluor/Appliance/Curtain). •Codes are controlled by any controllers, even computer or telephone interface. •Respond to the ‘’All Lights ON and All Units OFF’’ commands, except curtain switch.

Note:

For curtain switch cannot check motor Turn ON/OFF status.

Technical Information Model No. Power

PLCBUS-R 2280E PLCBUS-R 2281E

PLCBUS-R 2284H

PLCBUS-R 2225H

PLCBUS-R 3160H

400W

400W no total

800W(1000W)

800W(1000W)X2

90W for Motor

Incandescent

Fluor/Appli

Curtain

Dimmable

Yes

Built-in Filter

Yes

Fluor: Yes/Appli: No

Load type Control Load QTY

"All Lights on" Signal Speed

200 bits/Sec.

Command/sec

5 per cec

Reliability

>99.99%

Supply Voltage

230V + 10%, 50Hz

Ambient Temperature

-10ยบC to 50ยบC (operation)

Dimensions:

Switch Panel Size: 86x86mm Back Part Size: 43.25x47x18.9mm (PLCBUS-R 2225HE: 43.25x47x28.9mm)

Crystal Wall Switch Key Features •Two-Way Communications. •Light status feedback speed in 0.1 second. •100 Brightness levels for incandescent lamp (Dimmer only). •Soft start 0-9 seconds for incandescent lamp (Dimmer only). •High reliability, error rate in 1/10000. •Super high anti-jamming capability. •ON/OFF/DIM/BRIGHT control of load (No dimming for Fluor/Appliance/Curtain). •Codes are electronically set only 6 seconds without removing the switch. •Can be controlled by any controllers, even computer or telephone interface.

SB1

SB2

SB3

•Respond to the ‘’All Lights ON and All Units OFF’’ commands, except curtain switch. Note:

SB4

SB5

SB6

SB7

SB8

SB9

For curtain switch cannot check motor Turn ON/Turn OFF status.

Technical Information Model No. Power Load type Control Load QTY

PLCBUS-R 2220E PLCBUS-R 2221E

PLCBUS-R 2224H

PLCBUS-R 2225H

PLCBUS-R 3160H

400W

400W no total

800W(1000W)

800W(1000W)X2

90W for Motor

Incandescent

Fluor/Appli

Curtain

Dimmable

Yes

Built-in Filter

Yes

Fluor: Yes/Appli: No

"All Lights on" Signal Speed

200 bits/Sec.

Command/sec

5 per cec

Reliability

>99.99%

Supply Voltage

230V + 10%, 50Hz

Ambient Temperature

-10ยบC to 50ยบC (operation)

Dimensions:

Switch Panel Size: 86x86mm Back Part Size: 43.25x47x18.9mm (PLCBUS-R 2225HE: 43.25x47x28.9mm)

Scene Controller Key Features: •Highly reliability, error rate in 1/10000. •Super high anti-jamming capability. •Code set electronically. •Both ‘’Receiver’’ and ‘’Transmitter’’. •Each Scene can control up to 31 units. •‘’Beeps’’ indicates you have entered ‘’Setting Mode’’. •Local ‘manual’ control one or a group of units at a different place. •Choosing different switch panel colors to fit for your mood.

Function Remark: 1.Scene function: For example: You want to set a ‘’Dimmer’’ mode, you need 101ON, B07ON, Audio (C04) TURN ON, and the curtain (P08). Close, you can use your Mini-Controller send a series of address code. ‘’A01, B07, C04 and P08’’ one by one, then this ‘’Dimmer’’ Scene will memory these 4 address codes. When you tap ‘’Top’’ button for ‘’Turn on’’, the 4 units will ‘’ Turn ON’’ one by one. No sending commands with your controller one by one necessary. 2269E is an ‘’In-Line Module’’, it should be fixed behind any of your existing wall switch and it can control up to 4 scenes (16 units for each scene).

Technical Information Modelo No. Tipo de Produto Quantidade de Cenários Unidades de Controlo Velocidade de Sinal Alimentação Temperatura Ambiente

PLCBUS-T 2269E

PLCBUS-T 4206E

PLCBUS-T 4208E

Micro-Modulo

Interruptor

até 16x4

até 31x2

200 bits/seg.

230V +/- 10% 50Hz

-10ºC até +50ºC (funcionamento) -10ºC até +50ºC (funcionamento)

Dimensões (L x W x H)

Dimensões de painel frontal: 86x86mm Dimensões de micro-modulo:43.25x47x18.9mm

Nota

É possivel fazer regulação de fluxo se definir o código PLCBUS-T420E como uma lâmpada incandescente. Não é possivel regular fluxo para lâmpadas fluorescentes/aparelhos.(PLCBUS-T2269E variação de fluxo à distancia)

Key Features: 2026G/2026UK/2026AU •Light status feedback speed in 0.1 second. •64 Brightness level for incandescent lamp. •Soft start 0-9 seconds setup for incandescent lamp. •Highly Reliability, error rate in 1/10000. •Super high anti-jamming capability. •Code set electronically. •ON/OFF and DIMMER control of incandescent lighting. •Available in a wide range of plug style (China, German, British, Australian). •Designed to operate with 230VAC 40W to 600W incandescent lamps (110VAC also can be provided). •Responds to ’’standard’’ PLCbus that is: ‘’all lights ON’’ or ‘’all units OFF’’ from any controller set to its house code regardless of unit code or alternatively individual unit control by ‘’ ON’’, ‘’OFF’’, ‘’BRIGHT’’ and ‘’DIM’’.

Key Features: •Light status feedback speed in 0.1 second. •Highly reliability, error rate in 1/10000. •Super high anti-jamming capability. •Code set electronically. •ON/OFF function to control fluorescent lamp, appliances (No dimming). •Available in a wide range of plug style (China, German, British, Australian). •Designed to operate with 230VAC 800W – 2400W max loads (110VAC also can be provided) •Responds to ‘’standard’’ X-10 that is: ‘’all units 0FF’’ from any controller set to its house code regardless of unit code or alternatively individual unit control by ‘’ON’’ and ‘’OFF’’.

Technical Information Model No.

PLCBUS-P2026

PLCBUS-P 2027

Load Type

Incandescent lamps only

Fluorescent lamps and Appliances

600W / 2.5A

2400W / 10A

Sim

Deve ser configurado para lâmpadas fluorescentes

Power Responds “All Lights on” Plug Style

Europe

Signal Speed

200 bits/seg.

Commands / Sec

5 per sec

Reliability

Very High > 99.9%

Supply Voltage

230V +/- 10% 50Hz

Ambient Temperature

-10ºC to +50ºC (operation)

Compatibility

Be compatible with X-10 System by a "PLCBUS / X-10 int

Dimensions

110x60x35mm without plug part.

Mini/Max Controller Key Features: •Two-Way Communications. •Light status feedback speed in 0.1 second. •Highly reliability, error rate in 1/10000. •Super High anti-jamming capability. •Scene function work with receiver modules. •ON/OFF, DIM/BRIGHT, ALL Lights ON/All Units OFF. •Transmit many commands continuously at a moment; the commands will not be lost. •Conveniently, plug in installation provides for a simple install, there is not need for any professional assistance. •Can be used to program wall controllers and any other receivers requiring electronic PLCbus address programming.

Technical Information Model No.

PLCBUS-T 4034E

PLCBUS-T 4036E

Dimensions(mm)

141x94x26 26mm

220x131x71(top)x31(bottom)

Signal Speed

200 bits/sec

Command/sec

5 per sec

Reliability

>99,9%

Supply plug style

2-pin Europe

Supply Voltage

230V +/- 10%, 50Hz

Backlight

Yes

Ambient Temperature

-10º C to +50º C (operation)

PLCbus –T 4036UK Crystal Maxi-Controller The Crystal Maxi-Controller adopts advanced Electrify Transfer Induction Technology with two new CMOS Chips: (QTouch) and (QWheel), 1. Each key have an inductive-electric fiels, when your finger put on it, the key will send out the command; 2. You can Brighten/Dim lights through finger moving in the circle on the crystal panel. Let us enjoy our comfortable, fashion and smart new living! Centralizes Control up to 256 lamps or appliances ‘’ON/OFF’’, ‘’All Units ON’’, ‘’Brighten/Dim’’ function; Scene control function; Check the lamp ON/OFF status function, etc. (Detail introduction about it, please check its’ User Manual).

Telephone Controller Key Features: •Two-Way Communications. •Security code protection when call in. •Voice indicates you how to do next step. •Flashes lights when the phone rings. •Executes all common PLCbus/X-10 commands. •Controls all 256 PLCbus/X-10 addresses by any phone in the world (keypad control is also ok). •#5010E includes all functions of #4034E checking lights ON/OFF status, etc.

Technical Information Model No.

PLCBUS-T 5010E

PLCBUS-T 5012E

Button control by manual

Yes

Check lamp On / Off status

Yes

Scene Control

4 Scenes (up to 16 addresses in each Scene)

Timing Control

16 Timing Events Control

Silvery white

Plastic/Black

225x155x45 (L x W x H)

160x110x38(L x W x H)

Material of Casing / Color Dimensions (mm) Supply Voltage

230V + 10%, 50Hz

Supply Plug Style

2 pin - Europe

Transmitting Intensity

4-40KHz

Dial Type

DTMF

Ambient Temperature

-10º C to 50º C (operation)

Key Features: •Control up to 256 units through your computer interface. •Compatible with any X-10 RF Base. •Encrypt function prevent the interfaces between you and neighbors. •A software for free, and the software running automatically in CD-ROM or DVD-ROM.

Remotes Key Features: •Let you control up to 10/256 PLCbus/X-10 modules. •Encrypt Remote prevent the interfaces between you and your neighbors. •Encrypt is in 65536 different codes, it is very difficult that two Remotes have the same one. •Turn ON and Turn OFF, BRIGHT and DIM any X-10 module set to the same house code. •Sends wireless RF signals to the Transceiver or to any PLCbus/X-10 wireless security system. •Compatible with the full range of X-10 home automation.

Technical Information Model No.

PLC-RF 4059E

PLC-RF 4060E

PLC-RF 4070E

PLC-RF 4073E

Use with Transceiver

PLCBUS 4022E

PLCBUS 4023E

PLCBUS 4022E

PLCBUS 4023E

Style

Keypad

Touch-Screen

Control Units

Up to 4

Up to 256

LED/Backlight

Indicator LED

Backlight

Control IR Devices

Up to 4

Scene Function

Scenes (Up to 16 units for each)

Encrypt

Beeps Indication

Yes

"Arm" / "Disarm" Key

Yes

"Panic" Button

Yes

Hand

Hand/Fixed in the wall

3V Lithium CR2016x2

AAAx3

Installation Battery Radiated output RF Operating Range Dimensions

5800 uV/m@3m 5750 uV/m@3m 50m (open field)

200m (open field)

90x42x6mm

155x83x17mm

RF Frequency

433.92MHz

Ambient Temperature

-10ยบ C to +50 C (operation)

Compatibility

Be able to work with X-10 Modules by a PLCBUS/X-10 Interface

Related Products IR to PLCbus TRANSFER INTERFACE (WORK WITH X-10 IR CONTROLLER). Function: Transfer the IR signal into PLCbus command, and then to control PLCbus receivers.

Note: PLCbus3023E can only memory 1 House Code + 16 Unit Codes; if changing House Code, you need to use PLCbus controller that sends other House Code to #3023E for memory again.

Transceiver Module Key Features •Two-way Communications. •Light status feedback speed in 0.1 second •Highly reliability, error rate in 1/10000 •Super high anti-jamming capability. •Code set electronically. •Controls up to 64000 PLCbus modules with remote. •Built-in appliance switched dimming, remote control only).

outlet

(800W/no

•Choose between ‘’Encrypt’’ and ‘’Non-Encrypt’’. •Let the Encrypt Remote disabled after it is lost. •Available in a wide range of plug style (China, German, British, Australian). •Compatible with all X-10 wireless remotes.

Remark:

‘’Encrypt function: the encrypt IR signal from Encrypt Remote to Encrypt Transceiver Module is ‘’exclusive’’. Other common Transceiver Module will not respond its signal. Thus, it can prevent the interfaces between you and your neighbors. And also when your Encrypt Remote is lost, you can delete the setup with it by setting on the Encrypt Transceiver Module. It can let your lost Remote disabled.

Technical Information Model No.

PLCBUS - T 4022 AU/G/UK

PLCBUS - T 4023E AU/G/UK

Encrypt

Yes

Work with X-10 Remote

Yes

Signal Speed

200 bits/sec

Commands/sec

5 per sec

Reliability

>99.9%

Load Type/Power

Apliances only/800W Max

Plug Style

Europe

Supply Voltage

230V + 10%, 50Hz

RF Frequency

433.92 MHz

Transmitting Intensity

5µV, 92dB

Ambient Temperature

-10º C to +50º C (operation)

Dimensions

110 x 60 x 35mm (without plug part)

IR Device Controller: Key Features: •Code set electronically. •Control any IR Device Turn 0N/ Turn OFF. •Control up to 32 commands in one IR Controller. •Control most of Air-Conditioners, TV, DVD, VCR. •Prolong the the usage life of IR Devices.

Note: •The 2 products in below list do not respond All Lights ON/ALL Units OFF command both. •Cannot check below PLCbus-R 3011 UK controlled devices ON/OFF status. Only show last operation successful status.

Technical Information Model No.

PLCBUS - R 3011E

Operating Range

PLCBUS - R 3012E up to 3 meter IR emitter cable

Work with IR Eye

Responds commands

até 32

Supply plug style

Europe

Supply voltage

230V + 10%, 50Hz

Perpendicularity Elevation

+22.5º

Ambient Temperature

-10º C to + 50º (operation)

Dimensions(mm)

90x66x50

Yes

98x56x33

Related 3015 Function: Working with PLCbus-R 3012E, can receive PLCbus-R 3012E command, then amplifier and send out through the 4 IR eyes at the same time. No needing any setup (including no needing setup User Code).

PLCbus Security Interface Module (XM10+#4808) PLCbus 4809E

It is used with HAI, Visonic Security Console, etc. and control PLCbus modules directly. As if your controller can work with XM10, you can use #4809UK, send out PLCbus command, and then control our PLCbus system directly. Till now, our #4809UK can work with following several systems directly successfully, if any other new system ready, we will update below list: 1.Orev (Alarm System) with #4809E; 2.Visonic (Alarm System) with #4809E; 3.HAI (Home Automation management) with #4809E; 4.Superna (Home Automation management) #4809E; 5.Confort (Home Automation management) #4809E; 6.MainLobby (Home Automation management) with #4809E;

PLCBUS/X-10 System Transfer Interface Key Features •A bridge between PLCbus AND x-10 Systems. •With this interface (PLCbus 4808E) you can use our PLCbus controller to control common X-10 Products, and also can use X-10 Controllers to control our PLCbus Receiver Modules. •Plug-in type, very easy to be used.

Technical Information Model No.

PLCBUS 4808

Supply Voltage

230V +/- 10% 50Hz

Ambient Temperature

-10ºC to + 50ºC (operation)

Dimensions

110 x 60 x 35mm without plug part

Technical Information 4815E

4816E

4817E

PLCBUS 4825E

Rating Current

30 A

Function

Filter

Phases

1 phase

Material

Metal

40 A Filter 1 phase Metal 15x13.5x6

30A/Phase Filter 3 phase Metal 27x19x8.5

No limited Coupler 3 phase Plastic

Model No. Picture

Dimensions(cm)

15x13.5x6

Yes

Repeater

No (Coupler only)

Filter Centre Frequency

120 KHz

Filter Band With

5 KHz min(3dB)

Forward Attenuation

20 dB min. at 120 KHz

Forward Input Impedance Supply Voltage

20 Ohm min. at 120 KHz 2 dB max. at 120 KHz 230 +/- 10%, 50 Hz

Connections

Wired type terminals for phase(supply), phase(house), neutral, coupling

Coupling Loss

Ambient Temperature

-10 ºC até +50 ºC (funcionamento)

Problem Solution Filter/Coumpler

Acessories ensure PLCbus System maximum reliability! If you want to assure maximum reliability of your PLCbus system, you will need to supplement your system with bellow several products. The functions of them not only block unwanted interference on the powerline from outside or inside, it also prevents other devices from attenuating your signals-resulting in a virtually problem-free PLCbus system. Also with #2263DHE and #4826E, PLCbus system can extend control up to (dimming 1000W relay ON/OFF 2200W).

4817E 30A Whole-House Filter (3-Phase) in MD. 4821E Works with #4825E necessary. 4820E Weaken noise from light or device in your house. 4815E Filter and block noise from Frequency-Inverter Air Conditioner and Induction Cooker in your house. 48326E Can extend relay to 10A, then control up to 2200W. 4827E Dim Halogen LV Transformer 2263DHE With external connection High-Duty triac, for dimming lights can control up to 1000W.

PLCBUS 4830E PLCbus Signal Test Programmer Main Functions •Distribute 250pcs different User Codes to other controllers. •Log PLCbus Signal data information. •Log PLCbus command detail data string. •Central control 256 lights or appliances. •Two-Way Communications. •Send out control command, instant feedback operation successfully signal. •Check lights ON/OFF status and which address is used. •Check lights Brightness and soft-start timing length, etc.

Pictures:

Crystal Mechanical Switch Series

2301 E Crystal Single Button Mechanical Switch

2302 E Crystal Single Button Mechanical Switch

2303 E Crystal Single Button Mechanical Switch

High Reliability: PLCbus uses low frequency, spread spectrum technology which produces a very strong signal. In addition, PLCbus uses true 2-way communications, allowing devices to reveal their status with each other, providing feedback that commands have been successfully executed. This combines to result in reliable communications that are greater than 99% accurate.

No New Wires 100% powerline communication, no new wires. PLCbus products are fit to be fixed in any kind of residential environments and large commercial installation such as stadiums and gymnasiums.

High Speed Supports 0.3 second response time or 10 full commands per second which is 20 or 40 times faster than other Powerline technologies. This increase in speed delivers a lighting control system that is a very responsive to the touch.

Two Way Communications The media and protocol must be designed to be fully two-way for a variety of set up, configuration, and computer control reasons. PLCbus will be 100% two-way capable. It can check the lights ON/OFF Status.

64.000 Addresses Multiple houses on one transformer will be separated by means of an addressing scheme allowing for at least 250 different families, and control up to 256 lights or appliances for each family. PLCbus system incorporates over 64,000 total address space vs 256 for conventional X-10.

Compatibility PLCbus should be able to be used in the same environment as other Powerline technologies, such as X-10, CEBus, or LonWorks, without causing unacceptable interactions.

Our Compromise

Founded in 1997 Mkti designs, installs and sells home automation systems, electronic material and lighting. Mkti Domotics portfolio offers a variety of home automation areas, such as: Lighting, Sound Central, Home Automation, Telecommunications, CCTV - Surveillance, Alarms, IP Video Intercom, Central Vacuum and Floor Heating. Mkti is the official PLCbus distributer for Portugal and Spain. The twelve years of experience in the field of automation and integration systems allow us to say that this powerline communication protocol is definitely superior, either in the quality or in the price to the well known X-10. Desde o inicio de 2009 a empresa tem vindo a reposicionar-se, investindo na pesquisa e desenvolvimento de novas soluções integradas de domótica e Home Automation. Our action is guided by rigorous selection of brand and products, which give us unquestionable assurance. Systems and components covered in this selection belong at the essence of Comfort and Home Building Intelligence. We assume ourselves as a company turned to the future, with solutions that translate the perfect choice to sophisticated, functional and aesthetic environments creation.