Step by step instructions to make curtains with mo furnishings

Step by step instructions to Make Curtains With MO Furnishings

I've made ALL the window ornaments in my home {except for one room}.

Draperies are costly and now and then not even that awesome.

Particularly shades with power outage lining. I locate the ones you purchase in the stores are not by any means sufficiently dull to hinder the light.

By and large, shades are really simple to make. More or less, you should do nothing more than line up four sides. What's more, to make sure you

know, I'm not a sewer by any methods! Indeed, I've generally hated sewing. I never needed to learn and it has constantly disappointed me. So on the off chance that I can do this, you can do this! It might look muddled however believe me, it's simple.

Since I truly don't know how to sew {I can simply sew straight lines!}, I made up this instructional exercise so there may be a more proficient method for doing it, I don't have the foggiest idea. I additionally don't have the foggiest idea about the specialized terms for anything so hold on for me.

Before we start, let me simply include that power outage lined drapes are a MUST for any kid's room. My children won't rest if there is light gushing through at 5 am and that implies I don't rest! I've purchased a wide range of sorts of power outage blinds throughout the years and I find that they are simply not dull or sufficiently overwhelming. You need to purchase the genuine power outage fabric from a fabric store, the kind that is substantial, the kind that lodgings use!!

OK, so we should start!

SUPPLIES 1.Fabric or level sheets {floral sheets I got at Home Sense/cloth fabric from here} 2.Blackout coating {I purchased mine from Mofurnishings.com} 3.Sewing machine 4.Tape measure 5.Iron and pressing board 6.Fabric scissors 7.Pins

Instructional exercise STEP 1 {Make beyond any doubt your shade pole is as of now held tight the wall} To discover the length, measure from the blind pole stature down to the floor.

Include an additional foot.

STEP 2 To discover the width of one drapery board, measure the width of your window outline then twofold it {or you can utilize 1/2 times the width of your window frame}.

For instance, if your window width is 50 crawls wide, the width of your blind board will be 100 creeps wide. Since you are making two drape boards for every window, every board should be 100 creeps wide.

STEP 3 To quantify the power outage lining, take after steps 1 and 2 including 1-2 crawls all around for elbowroom. You might need to fasten additional power outage fabric together to make enough for one board. In the event that you do, make a point to permit a 1 inch crease stipend. It doesn't have to look lovely as should be obvious mine is all clustered up.

STEP 4 Presently take your fabric window ornament board to the pressing load up {leave the power outage lining for now}. Fold more than 1/2 to 1 inch along every vertical side of the board. Iron into spot.

STEP 5 Tuck the power outage lining under one side of the vertical window ornament board. Stick and fasten into spot.

STEP 6 Presently move to the next vertical side of the board. Cut the overabundance power outage lining with the goal that it lays pleasantly under the fold. Fasten into spot.

STEP 7 Sewing the top board: Cut away roughly 2 inches of the power outage lining from the even top {this permits less massiveness for stitching}.

Fold more than 1/2 – 1 inch of the fabric board and press into spot along the level top.

Fold over again roughly 2-3 inches of the even fabric board and fasten close to the base of the first overlay {see photograph below}.

This will make a pocket for the shade bar. You can in any case use cuts. It looks pleasant with an extensive stitch at the top in any case.

In the event that you are hanging your window ornaments specifically on the drape pole {through the pocket you just made}, ensure you have enough space for the drapery pole by putting the blind pole under the fabric fold before sewing!

Fold over more fabric on the off chance that you have a thicker blind pole.

STEP 8 Sewing: Once you have each of the three sides of one board sewed into spot, hang the window ornaments on the drapery pole precisely how you're going to hang them. Presently choose to what extent you'd like the blinds to be. Do you need them to pool a little on the floor? Do you need them to skim the floor? Pin where you'd like them to be fixed.

Bring them down and crease more than 1/2 – 1 crawl then iron into spot. Fold over that same sum and press into spot once more. Stitch into place.

Contact Details MO Address Sushant Lok Phase 1 Gurgaon, Haryana HR 122002 Email Us: info@mofurnishings.com Call Us: 0124 - 4777888