In Detail

134 IN DETAIL

EM ACOUSTICS | HALO-A

EM Acoustics recently revealed its HALO-A to the UK market, hosting a demonstration to showcase its newest line array loudspeaker system in a representative acoustic environment. The larger HALO-A follows the same core design as the more compact HALO-C, providing the signature EM Acoustics ‘maximum headroom’ design approach that ensures consistency of performance regardless of SPL level. The compact enclosure is 14.3-inch x 40.2-inch x 24.4-inch / 362mm x 1020mm x 619mm and has a low weight of 66kg, translates into less truck space used and smaller motors required. 

 The HALO-A utilises a proprietary patent-pending emulation manifold, which combines the energy of four 3.4-inch diaphragm, 1.4-inch exit compressions drivers into a plane-wave array. This assembly gives not only a

significant moving area for the high frequency section but also provides twice the headroom of comparable systems.
 
The HF section is flanked by a pair of high power 3.5-inch voice coil, 12-inch neodymium low frequency transducers. These two drive units combined with optimally-tuned low turbulence porting and generous cabinet volume ensure HALO-A has a low frequency performance to match the incredible highs. A single HALO-A exhibits a flat, free-field frequency response from 48Hz to 19kHz (+/-3dB) and a phase response which is +/- 20º between 150Hz and 18kHz. Due to the unique loading technique applied to the low frequency drivers, combined with the high frequency waveguide, the dispersion pattern control is maintained down to 250Hz. 

 HALO-A requires two amplifier channels

and makes use of the latest in FIR DSP technology requiring use of the EM Acoustics DQ20 advanced system amplifier. The enclosure is constructed from premium 15mm (five/eight-inch) and 30mm (13/16-inch) multi-laminate Baltic birch plywood, rebated, screwed and glued together for maximum strength. Intelligent bracing combined with lowloss porting structure minimises panel flexure removing unwanted resonances while keeping the overall enclosure weight low, and the enclosure is finished in a weather-resistant polyurethane coating.

 Each enclosure offers a simple and intuitive three-point flying system, assembled from ultra-high tensile strength steel parts coated with Zylan for enhanced durability. www.emacoustics.co.uk

• Above The new HALO-A from EM Acoustics.

• Above below The UK launch at London’s LH2 recording studios.

www.mondodr.com

ENDURA by name... ENDURANCE by nature.

RENTAL-READY IP65 RATED ENDURA EXTERIOR PARS

S AVAILABLE NOW S 2 YEAR WARRANTY S IDEAL FOR STAGE, EVENTS, TV & TOURING WHERE PROTECTION FROM MOISTURE, RAIN & DUST IS ESSENTIAL S 9 VERSIONS WITH A VARIETY OF LED OUTPUTS & COLOUR OPTIONS FROM COOL & WARM WHITE THROUGH TO RGBW, RGBA & HEX

For a demo/finance options... Call +44 (0) 1254 704 111 Email sales@prolight.co.uk Visit www.prolight.co.uk

136 IN DETAIL

DISGUISE | SOLO

solo brings the power of the disguise solution to smaller productions and experiences, within theatres, fixed installs, studio setups and smaller venues. It offers the support of our full disguise production suite, with the power and performance to meet modern demands. The solo is the natural progression from the disguise 2x2plus, future proofed for evolving industry needs with a significant increase in power, output resolution and even more storage. It can be used as a standalone solution, to design, sequence and play back your shows, or as a master in a larger network with professional and gx range machines. The 2U base units can be customised with HDMI and SDI capture, professional audio and 10GB

Ethernet ports, 4K outputs, fixed storage, 2TB SSD and full redundant capabilities - so whatever your needs and budget, there’s a disguise system tailor-made for you. The solo base unit can be configured to include HDMI and SDI capture, as well as featuring professional audio and 10GB ethernet ports, two x 4K outputs, fixed storage, 2TB SSD and full redundant capabilities. Additonally, the solo is a powerful 2U server, that can be used as a standalone solution, to design, sequence and play back your shows, or as a master in a larger network with professional and gx range machines.

www.disguise.one

Sarah Cox, Sales Director EMEA of disguise, on the solo:

“The solo has been created to enable artists and creatives to join our community, ensuring any project or budget can access the disguise software and hardware, without having to sacrifice on power and performance.”

www.mondodr.com

138 IN DETAIL

ADAM HALL | CAMEO ZENIT W600

Equipped with a total of 40 15W RGBW Cree LEDs for a massive 21,000 lumens output, the Cameo ZENIT W600 is a powerful IP65 rated wash light for demanding outdoor applications. In addition to RDM and standard DMX capability it boasts a built-in 2.4GHz W-DMX transceiver for convenient wireless control. The fixture also provides a rich variety of stunning automated programs for standalone or wireless master-and-slave operation. For maximum versatility, the ZENIT W600 sports Cameo’s innovative SnapMag technology. It allows adding filter frames in less than a second without the need for tools or dismantling. Magnetic SnapMag frames with precision light shaping diffusers providing a choice of 25°, 45°, 100° or elliptical 60° x 10° beam angles and a four-way barn door are available as accessories. Featuring advanced 16-bit technology for high-resolution colour mixing and dimming

and an 18° beam spread, the ZENIT W600 projects hugely intense, uniform washes. With colour temperature and individual LED colour correction, four selectable dimming curves and fully adjustable halogen lamp-like dimming response, the fixture is the perfect tool for highly professional lighting. The die cast aluminium housing integrates three temperature controlled fans that ensure optimised, low noise operation

www.adamhall.com

SPECIFICATIONS

Number of LEDs 40

LED Type 15W Cree

Dispersion 18° Beam, 35° Field

DMX Input / Output Five-pin IP65

Average LED Lifetime 50,000 hours

Power Consumption 565W

Colours Available Black

www.mondodr.com