TEST AND MEASUREMENT TOOLS

Klein Non-Contact Voltage Tester

Klein Tools Non-Contact Voltage Testers detect standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires. Priced each.

*Not Recommended for Tamper-Resistant Outlets

Foreign Voltage Detector

The Foreign Voltage Detector (FVD) tests for potentially hazardous AC voltage that may be encountered by communications technicians. The Foreign Voltage Detector warns technicians visually and audibly of hazardous voltage without contacting the electric source. Includes foreign voltage detector, leather carrying pouch and conductive cap.

*Each unit includes leather carrying pouch and conductive cap.

Tempo Test Set TM500

High Impedance Monitor / Data And DSL Safe - Polarity Test / Speed Dial / Last Number Dialed & Pulse Dialing

Tempo Test Set TM700

High-impedance monitor / LCD / Smart Intercom / Calling Line ID / Pair tracing toner / DTMF decoding

Multiple last-number redial / Ten # speed-dial memory. Priced each.

Tempo AT8K Network Kit

Kit includes the AT8 modular breakout tone generator and the 200EP inductive amplifier in a durable carry case. Priced each.

Greenlee Digital Multimeters

Large, easy-to-read displays. Frequency, capacitance, duty cycle, temperature, battery test and analog bar graph are just some of the features available on these meters. Lifetime warranty. Priced each.

Klein Auto Ranging Multimeter

Auto ranging voltage. Measures AC/DC Voltage - 600V (defaults to the AC voltage range) and AC/DC Current- 10A. Audible continuity with loud buzzer. Priced each.

Klein Scout® Pro 3 Cable Tester Kit

The Klein Scout® Pro 3 Tester Starter Kit is a versatile cable tester that locates and tests voice, data and video cables. Identify multiple cable runs with included location mapping remotes. Verifies accurate cable installations each time. Backlit display assists in reading results in lower light. Measure cable length up to 2000 feet (610 m). Test for Open, Short, Miswire or Split-Pair faults. Priced each.

Klein Coax Explorer™ Plus Tester

Quickly tests map/ID up to 4 locations simultaneously. Compact size fits easily into pocket or pouch. Bright LED indicates status and location of cable. Simple, push-button operation. Includes convenient remote holder. Priced each.

Klein Network Cable Tester, Lan Explorer Data Cable Tester with Remote

This simple, compact data cable tester for RJ11, RJ12 and RJ45 terminated voice and data cables for Miswires, Open-Faults, Short-Faults and Shield. Instant LED responses indicate cable status. The test remote stores securely in the tester body. The Auto Power-Off feature shuts the tester down automatically to save the 9V battery (included). Priced each.

Tempo Cable Tone Test Sets

Priced each.

Jameson Cable & Pipe Locator

Priced each.

Cable Pro Toner Unit

Used to trace any unmarked cable drops. High-pitched tone sounds when correct drop is identified. Uses two 9-volt batteries (Batteries included). Priced per pair.

Jonard PT-300 Cable Pocket Continuity Tester & Toner

Drop cable continuity tester - accurate up to 5,000 feet (1,500 m). Identify cables in an MDU, and detect troublesome short circuits. Priced each.

Klein VDV500-123 Probe-PRO Tracing Probe

Features a replaceable non-metallic, conductive tip and a work light. A headphone jack allows for use in extreme noise environments. The terminal block confirms the toned pair has been located. Priced each.

Klein VDV500-820 Tone & Probe PRO Kit

Includes the tools necessary to tone and trace wires in common wiring systems. Priced each.

Miller Mid-Span Access Tool

Priced each.

Miller Mid-Span Access Tool

With 16 unique settings, easily size and access fibers in buffer tubes ranging from 1 to 3 mm diameters in mid-span applications. Safe, compact & ergonomic design fits comfortably in hand for easy operation without risk of injury. Rugged polymer construction is lightweight & durable. Priced each.

Miller MSAT-5 Mid-Span Access Tool

For 1.9 mm - 3.0 mm. Priced each.

Miller 400 Series Fiber Slitter Kit

Includes 2.5, 3.0, and 4.4x8.2mm Head Blocks. Priced each.

Jonard Mid-Span Fiber Slitter

Designed to open fiber jackets and provide easy access to optical fibers in loose buffer tubes. With precision grooves buffer tube slitting is done without damage to the fiber. The blades are replaceable.

Jonard Fiber Optic Drop Cable Slitter

Slits both sides of the jacket allowing easy access to the fiber or strength member. The ease of use makes this tool truly unique! To use just position the tool around the cable, pull and slit.

Jonard Riser Slitting Tool

Mid-span slitting tool used to create access in round FTTH riser cables as well as microducts. It works with 8.5mm to 14mm round cables.

Jonard Fiber Cable Slit & Ring Tool

The CSR-1575 is designed to slit and Ring cables, buffer tubes and jackets on fiber optic cables up to 7.5mm in diameter.

Miller FTS Fiber Buffer Scoring Tool

Priced each.

Jonard Visual Fault Locator Kit

Portable light source tool for fiber tracing, fiber routing, and continuity testing to locate breakpoints (bending or cracking in fiber optic cables), and poor connections. The kit includes VFL-25 Visual Fault Locator and VFL-25125 Adapter For VFL FC-LC.

Cable Prep Focus Tool

Priced each.

Jonard Fiber Connector Cleaner

Priced each.

Miller Kevlar Shears

Priced each.

Jonard Wire and Kevlar Cutting Shears

High carbon stainless steel blades designed to cut Kevlar®, cabling insulation, tape, cable ties and other material. Priced each.

Jonard Fiber Optic Stripper 3 Hole

This Fiber Optic Stripper strips the 1.6-3 mm fiber jacket down to the 600-900 micron buffer coating. The second hole strips the 600-900 micron buffer coating down to the 250 micron coating and the third hole is used to strip the 250 micron cable down to the glass fiber without nicks or scratches.

Jonard Ergonomic Fiber Optic Stripper

Used for stripping the 250 micron coating from the 125 micron optical fiber.

Miller Fiber Optic Stripper

Cushioned surface protects delicate assemblies and expensive work surfaces. Makes handling small parts easier and quicker, inexpensive and disposable. Priced Each.

Miller Tri-hole Stripper

Tri-hole Stripper, 125 & 250 micron and 2-3 mm jackets. Priced each.

Miller Dual Fiber Optic Stripper

This dual-hole stripper is great for stripping 250 micron buffer coating to expose 125 micron cladded fiber. Second hole for stripping 2-3mm fiber jackets. Priced Each.

Miller Adjustable Wire Stripper

Strips and cuts insulated wire sizes from #22 AWG (.065mm) to #10 AWG (2.6mm). Effective for stripping and scoring fiber optic jackets and buffer tubing. Priced Each.

Jonard Fiber Cleaver

Single fiber cleaver accommodates either 900µm buffered or 250µm coated fiber. Quick and easy three-step operation is well suited for mechanical splice and quick termination field connector applications. The leaf spring base is ruled to allow for cleave lengths of 2 to 20mm.

Jonard Fiber Scribe

6mm wide blade with a 35-degree beveled edge. Features a wide carbide blade, allowing the cleaving of standard as well as larger diameter fibers and miniature rod shaped lenses. Ideal for scratch and pull scribing of fiber optic cables.

Jonard Fiber Connector Tool

Perfect tool for inserting and extracting fiber connectors in high density patch panels. Designed for LC, SC simplex and duplex connectors as well as with MU, MT-RJ and other similar type connectors.

Jonard Fiber Kit with Kevlar Cutter

The kit includes: JIC-375 Fiber Optic Stripper Three Hole, JIC-186 Wire & Kevlar Cutting Shears and H-60 Molded Two Tool Pouch.

Kevlar

Miller Fiber Inspection Microscope

LED-powered 200x or 400x microscope illuminates coaxial for fiber optic inspection. Integrated laser safety filters for viewing unlit fibers & side illumination port provides back-lighting as a fault finder to inspect jumpers. Features a universal adapter for most 2.5 mm connector ferrules including ST, SC & FC. (3) AAA batteries & padded storage case included. Priced Each.

Polywater Alcohol Wipes

Non-abrasive solvent, fast evaporating, residue-free solvent. Packaged 50 wipes/box. Priced per box.

INNO TS-Plus Thermal Fiber Jacket Stripper

• Long-lasting Thermal Stripper for ribbon fiber cable Dedicated stripper for ribbon fiber cable

• Hand-held type stripper

• World’s fastest heating time of 4sec

• Long lasting battery: Approx. 500 times with a full charged battery Simple Operation

TS-Plus is developed as a dedicated stripper mainly for ribbon fiber cable with thermal heater. With its simple and fast operation, anyone can do clear stripping with near-zero failure. It is a very stable tool with lightweight material and compact design. With easy hand operation, it provides long lasting battery capacity: approx. 500 times of ribbon fiber cable stripping. TS-PLUS is waterproof design, meet the requirement of KS waterproof first level. Priced each.

INNO Cable Jacket Stripper

• Long-lasting Thermal Stripper for ribbon fiber cable Dedicated stripper for ribbon fiber cable

• Hand-held type stripper

• Easy one hand operating

• Available for flat, 250µm and 900µm fiber cable

• Anti-slip grip design

• Long lasting lifespan: flat cable-60,000times / 250µm and 900µm fiber cable-90,000 times

DC300A/B is developed as all in one stripper with three side blades for flat cable(DC300A/3x2mm, DC300B/2x1.6mm), 250µm and 900µm fiber cable. It is a very stable tool with aluminum material and anti-slip grip design. With easy one hand operating as hand-held type stripper, it provides long lasting lifespan: 60,000 times of flat cable, and 90,000 times of 250µm and 900µm fiber cable. Priced each.

Fiber Splice Protection Sleeves

Our fiber splice sleeves are manufactured are made in the U.S.A. and work in most fiber splice sleeve ovens.

• Tapered ends guarantee that sleeve components will stay intact.

• Stainless steel rod fully deburred to protect the fiber.

• Tested and Approved since 1986.

See Our Line of Inno Fusion Splicers, Multimeter and OTDR’s on Pg. 96-97.

Jonard Fiber Prep Kits

The Jonard Fiber Prep Kits provide you with all the tools needed to access and prepare a fiber optic cable for termination. See chart below for specific tools included in each kit. All provided in a rugged tool case(H-90) with extra pockets for tools, connectors and many other items. Priced each.

Jonard Fiber Optic Power Meters and Light Sources

Jonard Tools makes fiber optic test equipment for many applications. Various adapter options are available to test all types of fiber connectors.

Jonard Fiber Optic Scissor Kits

Jonard Fiber Connector Cleaning/Inspection Kits

Provides you with all the tools needed for cleaning and inspecting fiber connector end faces.

Miller Fiber Optic Stripping & Cutting Tool Kits

Miller is long known for its quality fiber optic tools through their strength in engineering and design. All kits feature our heavy duty, easy to use fiber optic tools for stripping and cutting fiber optic cable.

Miller (ODM) Fiber Optic Inspection and Testing Kits

Our trusted line of optical test and inspection equipment is known for delivering innovative and scalable test solutions that are both easy to use and affordable. High-quality products include optical power meters, inspection scopes, fiber identifiers, laser/LED light scopes, OTDR’s, all-in-one test platforms, adapters and more.

VIS300C Automated Visual Inspection System - Includes 5” Monitor, HD Probe and 1.25mm/2.5mm, LC, SC Adapter tips

VIS300C-PM-02 Automated Visual Inspection System - Includes 5” Monitor, HD Probe, Power Meter, VFL and Universal 2.5mm

VIS300

(USB) & Probe - LC Bulkhead and 1.25mm Adapter Tips

RP 560 Optical Power Meter

• Bluetooth functionality compatible with Android & IOS devices

• 1000+ data point storage

• Test multiple sites & offload data from folders

• Wavelength ID mode detects signal & integrates with DLS models

• Audible modulation alert for 2 kH7, 1 kH7 & 270 H7 tones

• Compatible with all connector styles

• Single mode or multi-mode testing

• Includes convenient tool carrying case

UPM 100 USB Power Meter

• Connects to PCs & tablets via USB

• Transmit live dB & dBm readings for storage or closeout reporting

• Set reference / 7ero functionality

• Incoming 2 kH7 signal audible alert

• Compatible with all connector styles

• Single mode or multi-mode testing

RP 450 Optical Power Meter

• NIST traceable measurements

• Set reference / zero functionality

• Incoming 2 kH7 signal audible alert

• Compatible with all connector styles

• Single mode or multi-mode testing

• Includes tool carrying case

• Long battery life

Sturdy, Slimline, Mobile Design. Perfect for the cable professional in the field.

RP 460 Optical Power Meter

• Transfer data to computer via USB

• Stores over 4,000 readings

• NIST traceable measurements

• Set reference / 7ero functionality

• Incoming 2 kH7 signal audible alert

• Compatible with all connector styles

• Single mode or multi-mode testing

• Includes tool carrying case

LFI 110 Live Fiber Identifier Accessory

• FTTx active OLT or ONT detection

• Snaps directly on to RP 4XX power meters

The LFI 110 Live Fiber Identifier Accessory is a rugged accessory tool that is designed to fit onto the RP 4XX series optical power meters. This useful device allows the detection of active channels or 2kHz tones on any singlemode network. The LFI 110 is designed to accommodate 250 micron, 900 micron, 2mm or 3mm jacketed fibers.

PROD# DESCRIPTION

37-LFI 110 LFI Live Fiber Identifier Accessory - for use with RP 4xx OPMS $295.06

TTK 210 Basic Trace and Tone Test Kit

• Detachable assembly conveniently combines our RP 450 optical power meter with our LFI 110 live Fiber identifier

• Accommodates 250 um bare Fiber to 3 mm jacketed fiber

• NIST traceable measurements

• Set reference / zero functionality

• Single mode or multi-mode testing

• Compatible with all connector styles

• Kit includes hard carry case & SC to SC patch cord

VF 610 635nm Red Laser Visual Fault Locator

• High-visibility & high-output device emits a 635 nm red laser to easily detect Fiber breaks

• Compact & rugged design ideal for field or laboratory use

• Provides 2 Hz or continuous wave modes of operation

• Features a 2.5 mm universal output connector(SC, ST, or FC)

• Utilizes 3.0V CR2 batteries for an extensive battery life of approximately 1,000 testing operations

• Includes tool carrying case

• High output, up to 1mW

The VF 610 is a high output visible laser designed to locate and identify faults in fiber optic cables, jumpers, patch panels, and other cable splice areas. The visual fault locator may be used within the OTDR “dead zone” to identify breaks and faults in the fiber.

OTDR 800 Optical Time Domain Reflectometer with Bluetooth®

• Compact & portable, ideal for tower climbers & technicians on the go

• Detailed screen views provide visual trace & PASS/FAIL analysis

• LCD touchscreen interface with compact stylus provides refined cursor positioning & easy selection

• Unique ergonomic, soft & compact case offers device protection

• Bi-directional averaging performs necessary calculations automatically

• Simplified user interface features Auto-Test capability for easy testing

• 1 meter dead zone delivers accurate reflective event testing in even the shortest fiber systems

• Bluetooth® compatibility with Android Smartphones & Tablets

Free downloads of inSpec® and OpTest software included with all products.

AllMillertestandmeasurementtools are covered by a 2-year warranty.

2-YEAR WARRANTY

VIS 300 Field Connector Inspection Scope

• Unique external focus system

• Adapter tips for all connector styles

• Allows both manual and software-based inspection

• Includes tool carrying case

The VIS 300 advances field connector inspection with its unique focus system. This development virtually eliminates the need to place the user’s hand in the same position each time for effective focus control. Includes a bright 3.5 inch LCD display and precision optics to provide an unmatched FOV of 630µm by 440µm. Lithium Ion batteries provide 8-10 hours of continuous use.

VIS 300C Automated Fiber Test Platform

• Automated image centering and analysis

• Optional OPM with 850, 1300, 1310, 1490, 1550, and 1625nm calibrated wavelengths

• Optional 635nm VFL red laser

• Share closeout reports via Wi-Fi (email or cloud storage)

• Includes tool carrying case

All-In-One Hand-held Inspection Scope, Optical Power Meter, and VFL. This system brings together the most effective methods for verifying fiber connections to yield simple and repeatable test results. The VIS 300C platform helps streamline fiber testing processes through an easy results-saving and reporting system. The 5-inch touch-based user interface allows users to quickly switch between inspecting fiber endfaces, testing with an optical power meter, and troubleshooting via an onboard VFL.

VIS 400 HD Inspection Scope

• Large field of view

• Automated PASS/FAIL analysis

• Stream images via USB

• Includes tool carrying case

Allows test technicians to inspect and grade fiber endfaces by offering the most detailed image possible. When used in conjunction with ODM’s proprietary InSpec™ software the VIS 400 ensures compliance with the IEC 61300-3-35 standard. Provides a high-definition image with a 860µm x 640µm field of view, allowing technicians to see debris outside IEC specified zones.

Adapter tips

VIS 500 Wireless Fiber Inspection Scope

• High-definition, large field-of-view image

• Quick-change adapter tips for all connector styles

• Robust battery & comfortable grip for all-day use

• Includes convenient tool carrying case

The VIS 500 Wi-Fi Fiber Inspection Probe is a user friendly inspection scope. With automated image focus, PASS/FAIL functionality, and easy pairing to Android™ and Apple® iOS devices, the ODM® VIS 500 simplifies the crucial fiber inspection process. Outputs a standard Wi-Fi signal that can be used to turn any smart device into a fiber testing hub. The inSpec® software allows Android or iOS users to easily view fiber end faces, run automated analysis, save images,and create/share reports.