OPTICAL POWER METERS, LASER AND LED LIGHT SOURCES

DLS 350 Dual LED Source

• 850 & 1300 nm wavelengths

• NIST traceable measurements

• 2 kHz tone output

• Universal connector interface compatible with SC, FC, ST & LC

• Includes tool carrying case

• Long battery life

DLS 355 Dual Laser Source

• 1310 & 1550 nm wavelengths

• NIST traceable measurements

• 2 kHz tone output

• Universal connector interface compatible with SC, FC, ST & LC

• Includes tool carrying case

• Long battery life

DLS 360 Dual Laser Source

• 1490 & 1625 nm wavelengths

• NIST traceable measurements

• 2 kHz tone output

• Universal connector interface compatible with SC, FC, ST & LC

• Includes tool carrying case

• Long battery life

DLS 650 Dual Multimode LED Source

• 850 & 1300 nm wavelengths

• NIST traceable ED output

• 2 kH7, 1 kHz & 270 Hz tone options

• Universal connector interface compatible with SC, FC, ST & LC

• Includes tool carrying case

• Long battery life

DLS 655 Dual Singlemode Laser Source

• Wide range of wavelength models available including single & multi-mode testing options

• NIST traceable measurements

• 2 kH7, 1 kH7 & 270 HZ tone modulation

• Easily integrates with RP 560 optical power meter to complete multiple loss tests simultaneously

• Available with single or dual output ports for faster switching while testing multiple wavelengths

• Universal connector interface is compatible with SC, FC, ST & LC connectors

• Includes convenient tool carrying case

• Long battery life

Free downloads of inSpec® and OpTest software included with all products.

Sturdy, Slimline, Mobile Design. Perfect for the cable professional in the field.

Amphenol Fiber Demarcation Box Gen 2

Amphenol Broadband Solutions offers a comprehensive solution for Multiple Dwelling Unit (MDU) applications based on our Fiber Demarcation Enhanced Access (FDE) box. The Fiber Demarcation Enhanced Access enclosure has a low profile, side-by-side door design that provides an ideal environment for splicing and patching in indoor wall-mount applications. An integrated access door on the customer side of the enclosure provides a generous opening for a cleaning tool to reach the optical connectors resulting in a more craft-friendly design. The access door can be opened by-hand without the use of tools.

79-ASBFDE1025887 (1) 12pk panel, (12) SC/APC adapters and 900um pigtails, (1) splice tray with (1) SF splice module

79-ASBFDE1025769 (2) Single cable retention brackets, (24) SC/APC adapters and 900UM pigtails, (2) small splice trays with (1) SF splice module per tray

Amphenol Fiber Optic Dome Closure

Amphenol Fiber Optic Dome Closures provide a versatile solution for splicing and protecting outdoor fiber connections in a familiar dome form factor. FODC units can be deployed to support a variety of topologies including strand or pole mountings, as well as below grade vault placements. These closures use compression grommet sealing technology to provide a robust and easy to use economical IP68 rated solution. Priced each.

• Robust glass-filled polypropylene housing

• Closures are aerial, pole, wall or below grade mountable

• Assorted grommet set for common cable sizes and armored cable

• Environmentally sealed and IP68 rated

Amphenol Fiber Optic Round Closure

The Amphenol fiber optic round closures provide a versatile and functional cost effective space saving solution for FTTH network connections. These compact closures are a space saving solution. The units can be direct buried and make an ideal solution as a repair closure. In addition, the branch ports can be fitted with multi-cable grommets to splice in drops and can be used as a drop closure. These closures are fully sealed units which can be installed to meet any deployment requirement. Priced each.

Amphenol R02 Tap/Fiber Terminal Pedestal

Amphenol R02 Round Profile Non-Louvered Vertical Pedestal provides mounting facilities and security for fiber taps and RF passive components used in today’s Fiber-to-the-Home or coaxial based access networks. The pedestal is engineered for installation with the integrated galvanized equipment mounting stake. Various access networking equipment can be affixed directly to the slotted thru–hole provisions integrated into the equipment mounting stake. These pedestals are molded from a polyethylene resin specifically designed for outside plant environments, resisting impact, ultraviolet and environmental degradation. Priced each.

PROD# DESCRIPTION

79-R02SS07-21000BK Amphenol R02 10” x 30” Tap/Fiber Terminal Pedestal $57.50

Amphenol Z02 Tap/Fiber Terminal Pedestal

The Amphenol Non-Louvered Vertical Plastic Pedestals provide mounting facilities and security for taps, splitters and line extenders. The hex-head self-locking dome provides added protection against open enclosures. The Z02 includes integrated equipment mounting stakes which allows the equipment to be secured directly to the stake. These pedestals are molded from a polyethylene specifically designed to resist impact, ultraviolet and environmental degradation. Priced each.

PROD# DESCRIPTION

79-Z02SS07-21000BK Amphenol Z02 13” x 12” x 26”

Amphenol Z14 Low Profile Housing Pedestal

The Amphenol Z14 pedestal housing was engineered specifically to meet the demands of next generation CATV network architectures and equipment. It is built to withstand the harsh elements typically found in outside plant deployments. Leveraging our expertise in outside plant enclosure engineering, thermal analysis, design and testing, the Z14 is capable of supporting R-PHY compliant equipment across all regions in the USA. Packaged 4 units/pallet. Priced each.

• Insect resistant openings to prevent wasp/bee intrusion to protect technicians

• Self-latching dome locking system reduces unlocked pedestals and unwanted access

• Corrosion resistant aluminum or stainless steel brackets and hardware for long service life

• Designed for fiber optic node plus fiber optic cable slack storage (120 ft, 0.70” O.D.) PROD#

Amphenol Tech Service Reel-In Bag

This sturdy and water resistant bag, features a reinforced bottom capable of maintaining its shape and performing as a true technician assistant. Capable of holding a 500 ft coil using the included special plastic reel, the coil can be changed quickly and easily with very little recyclable waste left to store in your vehicle. Priced each.

• Tool pouches – eliminates need to carry separate tool pouch

• Part Pouch – connectors, f-81’s , splitters

• Tablet/Paperwork Pouch

• Cable Pay out Slot

• Handle and Carrying Strap

Coyote LCC Low Count Closure Kits

The COYOTE LCC’s compact size - 14” x 6.5” x 2.4”, use of the versatile grommet system and internal LITE-GRIP® Splice Platform are designed to make this rugged closure the economical choice for new installations and critical repair situations, in-line or butt splices. Max splice capacity is (24) single fusion, (72) ribbon/mass fusion. Direct buried, below grade, pole/wall mount and aerial application allows for multiple splice applicatons within one closure.

PROD# DESCRIPTION

$57.50

Grommet: Cat. #8003796 $62.13 82-COYLCC-F003 For Ribbon. Includes: (2) 2-Hole Grommets: Cat. #8003663 $57.50 82-COYLCC-F004 For Single Fusion. Includes: (2) 7-Hole Grommets: Cat. #8003676 $56.25 82-COYLCC-F005 For Single Fusion. Includes: (2) 2-Hole Grommets: Cat. #8003663 $56.25 82-COYLCC-F006

For Single Fusion. Includes: (2) 4-Hole Grommets: Cat. #8003664

$57.50

82-COYLCC-F008 For Single Fusion. Includes: (1) 1-Hole Grommet: Cat. #8003691 and (1) 8-Hole Grommet: Cat. #8003677 $56.25

82-COYLCC-F009 For Single Fusion. Includes: (2) 12-Hole Grommets: Cat. #8003796 $56.25

82-COYLCC-F010 For Single Fusion. Includes: (1) Bobbin Kit, (1) 1-Hole Grommet: Cat. #8003691 and (1) 12-Hole Grommet: Cat. #8003796 $62.13

All Fiber Kits Include: (2) Grommets, (3) LITE-GRIP® Splice Blocks, (1) Splice Platform, (1) Dual Strength Member Bracket, (1) L Bracket, Fiber Management Clips and Misc. Hardware *For the COYOTE LCC Flame Retardant catalog numbers, insert “FR” into the catalog number code. Ex.: COYLCCFR-F001

Coyote In-Line Runt Closure Kits

The COYOTE In-line Runt is 18.7” x 10” x 3.7” and has (4) entry ports for up to 1 1/4” cable diameters, opens/closes with can wrench (hinged cover) with integrated air valve for seal test. Perfect choice for distribution and fiber-to-the-premise networks, in-line or butt/expressed splices. Max splice capacity is (96) single fusion (80809958 Tray), (288) ribbon/mass fusion (LGSTR144 Tray). Direct buried, below grade, pole/wall mount and aerial application allows for multiple splice applications within one closure.

Closure Assembly, (4) 8003701 Grommets and Cable Restraint Hardware

Preformed Drop Splice Kits

Coyote DTC Drop Termination Closure Kits

The COYOTE DTC is 9.1” x 7.6” x 1.7”. It’s compact size and rugged exterior make it versatile, in-line or butt splice. Four corner entry ports (accepts cables up to .370 diameter) makes it flexible to install. Snap together, no special tools required. Max splice capacity is (16) single fusion (splice blocks provided), (36) ribbon/mass fusion (splice blocks provided). Direct buried, below grade, pole/wall mount and aerial application allows for multiple splice applications within one closure.

PROD# DESCRIPTION

82-COYDTC-001

82-COYDTC-002

82-COYDTC-003

For flat and small drop cables. Kit includes: (4) Port Sealing Grommets for flat drop cable and .170” -.25” (4.3 - 6.4 mm) cable diameters, (2) Single Fusion Splice Blocks, (1) Ribbon Splice Block and Cable Restraint Hardware

82-COYDTC-004

Price

$43.30

For larger round cables. Kit includes (4) Port Sealing Grommets for .25” -.37” (6.4 - 9.4 mm) cable diameters, (2) Single Fusion Splice Blocks, (1) Ribbon Splice Block and Cable Restraint Hardware $51.40

For large round shielded drop cables. Kit includes (4) Port Sealing Grommets for .25” -.37” (6.4 - 9.4 mm) cable diameters, (4) Small Hose Clamps, (4) Cable Retention Clips, (2) Single Fusion Splice Blocks, (1) Ribbon Splice Block, Cable Restraint Hardware, (4) shield continuity clips and (2) shield continuity wire assembly

For Sumitomo PureFitTM FTTX 36 Fiber Flat Drop Cable. Kit includes (2) grommets for Sumitomo PureFit cable (2) sealing port grommets for .170”- 250” (4.3 - 6.4) mm cable diameters (1) splice tray with (4) splice blocks, (1) buffer tube storage ring and cable restraint hardware.

Coyote GLC Ground Level Closures

• Used for splicing and storing cable during initial construction

• Allows for fiber splicing at a fixed or remote location such as a splice trailer

• 17” x 9.5” Dome Assembly provides a hermetical seal to keep out water, insects, rodents, and other harmful elements

• Full GLC Assembly includes: (1) GLC Dome, (1) Collar, (1) fiber organizer, (1) platform, and (1) base

• All GLC components are modular and can easily be replaced

• GLC base allows for storage of 50 ft (1524 cm) cable legs

• Available Grounding Spacer permits ground isolation / investigation without entering the dome closure.

Call for 28” Dome Enclosures or custom configurations.

Platform X w/o Base

82-COYGLC-F2B-000 Dome, Buffer Tube Organizer, Platform and Base X X

82-COYGLC-F2B-100 Dome, Buffer Tube Organizer, Platform, Base and Grd Spacer X X X

82-COYGLC-F3-000 Dome, Cross-Connect Organizer (Empty) and Platform X w/o Base

82-COYGLC-F3B-000 Dome, Cross-Connect Organizer (Empty), Platform and Base X X

82-COYGLC-F3B-100 Dome, Cross-Connect Organizer (Empty), Platform, Base and Grd Spacer X X X

82-COYGLC-F4-000

Dome, OptiTap Organizer (Empty) and Platform X w/o Base

82-COYGLC-F4B-000 Dome, OptiTap Organizer (Empty), Platform and Base X X

82-COYGLC-F4B-100

Dome, OptiTap Organizer (Empty), Platform, Base and Grd Spacer X X X

17” Organizer Selection Splice Tray

Please call

Please call

Please call

Please call

Please call

Please call

Please call

Please call

Please call for ANY application. Just give us a call and we will start working on it.

All 17” COYOTE GLC Kits listed above include the green GLC dome, small base, organizer assembly, gasket, collar, (2) 8003663 grommets, (1) 8003664 grommet, (1) 8003665 grommet, (1) 80808945 Splice Tray and cable restraint hardware. Cross-Connect organizers require additonal selections of the adapter and pigtail accessories, please call. Custom configurations of the COYOTE GLC are available upon request or visit us @ www.BudcoCable.com.

INNO Fusion Splicers

Industry Leading Characteristics

• Highest Resolution Touch Screen with Smart GUI

• Double Tap to Zoom In and Out

• 3 Bright LEDs for Working in Dark Environments

• Fast Heating Times

• Ultra-High Capacity Battery

• Easy to Replace Electrodes

Believe Your Eyes.

View Pro Management System is an integrated cloud-based software platform for INNO’s splicers. This innovative webbased application allows both technicians and managers of the splicers to maximize the use of its assets and to achieve the highest work efficiency. Real-time communications with tiered access rights and options to manage job orders, manage splicing machines, and send/receive reports are only a small part of the innovative work processes offered by the View Pro.

Call For Your Everyday Low Price

*Please see www.BudcoCable.com for complete specification details.

Inno View 500 Otdr

The VIEW500 OTDR includes high precision test capabilities (SOLA), fast response times, and a built in VFL, Light Source and OPM (no need for the optional V20 and/or V30 for operation). The VIEW500’s 7” touch screen offers a user friendly, accurate and fast test results and creates a report automatically. The VIEW500 OTDR is equipped with an industrial grade CPU for creating and storing up to 160,000 sampling test results with 12 hour battery life. Includes power cord, soft carrying case, shoulder strap, touch pen and calibration certificate. Priced Each.

Inno Mini 2 Otdr

The MINI 2 includes high precision test capabilities (SOLA), fast response times, a built in VFL and Light Source (if a V20 microscope and/or an V30 OPM is needed, please purchase separately, see below). The MINI 2’s 5” touch screen offers a user friendly, accurate and fast test results and creates a report automatically. The MINI 2 OTDR is equipped to create and storing up to 110,000 sampling test results with 12 hour battery life. Includes power cord, soft carrying case, shoulder strap, touch pen and calibration certificate. Priced Each.

Inno V20 Fiber Optic Microscope

The V20 Fiber Microscope is chiefly used in checking if the fiber end-face is clean. With the ability to display a clear image and thedouble amplification function, the V20 is able to analyze the cleanliness of the fiber end-face. Can be used with the Inno Mini 2 OTDR (see above). Or, software available for download for use with a PC. Patchcord tip adapters included: 1.25mm and 2.5mm for UPC & APC.

INNO V30 Optical Multi-Meter

The V30 network optical multi meter is easy to operate with multiple functions such as OPM, VFL and LAN & Telephone Line Test. The V30 is designed to use at the construction fields for optical cable maintenance, telecommunications companies and data centers. Fiber Port Type: SC, FC & ST. Two AA batteries required. Priced each.

Service or Product Questions?

Help is always available at 800-331-2246 or mail@BudcoCable.com.

You may place your order by phone, mail, fax or the internet. When placing your order, please specify product number, item, and quantity. When product is offered in more than one color, please specify your choice. Please allow for a 10% over or under shipment and a $50.00 one-time screen charge on custom and personal imprinted products. Minimum stock order is $25.00.

Phone Order

If you place your order by phone and intend to send a confirming purchase order, be sure it is clearly marked “CONFIRMING” to eliminate duplicate shipment of the order.

Call Mon-Fri, 8:00 AM - 5:00 PM CDT

Toll Free: 1-800-331-2246

Phone: 918-252-3420

Toll Free FAX: 888-TAPLOCK (827-5625)

Address: Budco

2004 N. Yellowood Ave. Tulsa, OK 74101-3065

Shipment Information

Budco ships in stock merchandise within 24 hours on orders placed by 12 noon, except in cases of unplanned stock depletions. Orders are shipped F.O.B. Tulsa, OK, or point of origin. Shipping charges are prepaid and included in the invoice. Budco ships the most economical way, unless customer specifies differently. Budco must be notified of any shipping discrepancies within 30 days of receipt of order.

Damaged shipments: Our primary carriers are UPS and FedEx. If you receive a damaged shipment, it is imperative that you keep the damaged packaging in order to facilitate a damage claim.

Terms of Sale

Terms are Net 30 days from invoice date for open account customers. Contact us for a credit application. If you do not have established credit with Budco, we accept all major credit cards.

Return Policy

Prior authorization from Budco on all returned merchandise is required. This is to assure proper credit or refund. All returned shipments should be prepaid. Returned merchandise is subject to a 15% restocking charge. No returns on personalized or custom items.

Return

Preferred

Budco’s