HSGM HEAT-CUTTERS
Type HSG-0 Handoperated tool to cut small quantities, recommended for short-time operation only. Suitable to cut and seal the edges of synthetic fabric, such as cords, ropes, bands and belting fabric. Heat up time of blades approx 6-8 seconds. Heat may be controlled by switching tool on and off. Technical Description: Supply voltage: 230V - 50Hz (110V - 60Hz) Power input: 60 Watt Intermittent operation: 1/4 min. Protective insulation 2 m electric cord with 2-pin straight plug Weight: 1,0 kg Basic Kit: HSG-0 Operating instructions with EC Declaration of Conformity Blades not included Practicable blades:
Leaflet “Heat-Cutters�, pages 6+7.
Utility: Cutting foot Type SF lf the tool is fitted with cutting foot SF and blade type R, synthetic fabric can be separated without using a cutting surface. This combined tool is especially effective when cutting large sized cloth such as sail cloth, awnings and filter cloth. The tools models HSG-1-VW, HSG-03-VW and HSG3-VW are equipped with blade holder type M. This blade holder can be fitted with an angle to hold cutting foot type SFW as well. Technical Description: As type HSG-0, still weight: 1,1 kg.
Practicable blade:
HSGM GmbH In der Rehbach 13 D-65396 Walluf
Cutting blade type R
Telefon: +49 (0) 6123 9978-0 Telefax: +49 (0) 6123 9978-40 E-Mail: info@hsgm.com http://www.hsgm.com