MOTICAMPRO P R O F E S S I O N A L
C C D
M I C R O S C O P Y
C A M E R A S
2
MOTICAMPRO The Moticam PRO series contains 12 models with different SONY ICX sensor resolutions and technical characteristics, providing users with a wide variety of options to choose from. It includes Colour CCD imaging sensors for conventional microscopy techniques, Monochrome CCD imaging sensors for low luminosity microscopy and Peltier cooled CCD Colour and Monochrome imaging sensors for fluorescence microscopy. The cameras are assembled and tested to the highest standards in the clean room at our factory. All Moticam PRO cameras come with the universal c-mount thread and are connected to the PC via a USB 2.0 port. The Moticam PRO Series comes with the well known and user-friendly Motic Images Plus 2.0 analyzing software (multilanguage). Additionally with any Moticam PRO, the sophisticated Motic Images Advanced 3.2 is supplied free of charge. Furthermore the Motic TWAIN drivers, Direct Show drivers (via our website) and the SDK are included with the software package of the Moticam PRO.
3
Peltier Cooling device When using a camera for a long time, the sensor gets warmer and warmer. When using long exposure times, it becomes more sensitive to noise and this can be seen in the captured image. With our Peltier mechanism, the sensor is cooled down up to 10°C below ambient temperature (ambient = the temperature inside the camera case). Peltier Cooled cameras are therefore recommended for fluorescence applications.
Live readout The cooled version of the Moticam PRO features a built-in sensor arrays that allows the user to see live updated information on the Sensor and Ambient Temperature, as well as the Relative Humidity inside the casing. Thus eliminating the possibility of condensation brought on by rapid cooling. Additionally the user can set a “Target Temperature�.
Colour and Monochrome Colour cameras use a RGB primary colour mosaic filter on the chip. The distribution is standard; 25% Red, 50% Green and 25% Blue. Most of the time when working in fluorescence only one colour is revealed; therefore not allowing all available pixels to receive information. Just imagine seeing a blue image through the eyepieces, this means that only 25% of the total pixels are receiving and distributing information. The Monochrome cameras do not have any colour filter and therefore each pixel records the amount of light it sees. It does not transmit any information on the colour of the sample to the computer. For these reasons monochrome cameras can definitely be considered when working with fluorescence. You will have better chances of capturing low light samples when using the full capacity of the pixels in the chip. Of course colour is important in fluorescence, but this can be added at a later stage with software.
4
MODEL
SENSOR SIZE
PIXEL SIZE
RESOLUTION
1/2”
4,65 x 4,65
1360 x 1024
ICX252AQ
1/1.8”
3,45 x 3,45
2080 x 1542
ICX282AQ
2/3”
3,40 x 3,40
2580 x 1944
2/3”
6,45 x 6,45
1360 x 1024
SONY SENSOR
A ICX205AK
MOTICAMPRO
205
B C ICX205AL
D
MOTICAMPRO
252
MOTICAMPRO
282
A B
A B
A ICX285AQ
MOTICAMPRO
285
B C ICX285AL
D
NOMENCLATURE
Monochrome
Colour
Peltier cooled
High speed
5
Motic Images Plus 3.2 This software contains all functions of our well-known Motic Images Plus 2.0 software plus much more. Its main features are:
Motic Images Advanced 3.2 - Counting
Capture Auto Capture Video recording Measurements
Automated counting Creating reports Image comparison Amalgamation
What makes Motic Images Advanced 3.2 software a more sophisticated version are the following features: segmentation, multi-focus and assembly.
Segmentation
Motic Images Advanced 3.2 - Assembly
The superior counting module allows you to perform manual segmentations by using a histogram (colour), grey scale or by selecting the size. You can create in one sample different groups, which will be highlighted in different colours. After the segmentation has been performed, you will have information about the area in square Âľm, perimeter, width, height and much more details. The results of the segmentation can be exported in an excel file for further analysis.
Assembly This module can be used for creating a single overview image out of multiple separate images. The software recognizes any overlapping and corrects this automatically. This software is specially designed for users who wish to have an overview of the complete sample, while working at a higher magnification. Motic Images Advanced 3.2 - Segmentation
Multi Focus The multi-focus module can be used to capture up to 100 images taken at different focusing levels. The software will automatically recognize the parts that are in focus in each image and assemble them into a new file. The result is a single image that is completely in focus. * Motic Images Advanced 3.2 is available in English language and is only compatible with PC.
Motic Images Advanced 3.2 - Selection
6
Hardware • Sony ICX CCD imaging sensor • Motic control, processing & imaging boards • Built-in 4 frame buffer* • Built-in FPGA processor* • TTL trigger port* • Schott BG-40 filter • CS/C mount (c-ring provided) • USB2.0 data mini port (usb cable provided) • Universal power supply (for cooled cameras only) • Peltier cooling device (for cooled cameras only) • Cooling up to 10 degrees below ambient with temperature readout * Unlockable with SDK integration
Software • Motic Images Plus application software • Motic Images Advanced application software for Windows computer only* • Twain drivers • Motic SDK • Motic Direct Show drivers • Motic MI Devices live imaging module with live calibration grid, scale cross and scale bars * Available through free download
Minimum computer specifications • Intel 1GHZ • 1GB RAM • USB 2.0 • Windows XP (SP3) • Macintosh OSX
7
Quantum Efficiency Diagrams Moticam Pro 205A
Moticam Pro 205C
& 205B G
0.8
R 0.8
B
0.6
Relative response
Relative response
0.6
0.4
0.2
0
400
500
600
0.4
0.2
0
700
400
Wave length
1.0
500
B
& 252B
B
900
1000
0.6
0.6
0.4
0.2
0 500
650
700
900
1000
& 282B
550
G R
0.8
Relative response
Relative response
R
600
650
0.4
0.2
0
700
400
Wave length
450
500
550
600
Wave length
Moticam Pro 285A
& 285B
Moticam Pro 285C
1.0
& 285D
1.0
0.9
R
G
0.9
0.8
0.8
0.7
0.7
B
0.6
Relative response
0.6
Relative response
800
1.0
G
450
700
Moticam Pro 282A
0.8
400
600
Wave length
Moticam Pro 252A
0.5 0.4 0.3 0.2 0.1 0 400
450
Wave length
8
&205D
1.0
1.0
500
550
600
650
700
0.5 0.4 0.3 0.2 0.1 0 400
500
Wave length
600
700
800
Unit Control Software (MI Device)
Available options Video Device
Connection of multiple devices at the same time (Selection of the active device)
ROI function
Region Object Interest (manual selection)
Exposure time
Manual / Automatic
Full screen
Automatic
White Balace
Set Method, color balance ajustment
Image adjustments
Gain / Offset / Enhance / Gamma
Storage Format
SFC / JPG / BMP / TIFF / DCM (Available on Motic Advanced 3.2)
Background Balance
Manual
Color correction
+/- 10 (RGB)
Histogram
Live window in real time
Filters Live Image
Invert / Gray / Emboss / Red / Green / Blue / Red reverse / Green reverse / Blue reverse
Edge detection
0 / 10
Sharpness
+/- 10
Remove Noise
4 Levels
Scale
Live Images, Horizontal and Vertical (user configurable)
Grid
User configurable
Scale Cross
X e Y distances (select position)
Record parameters
Single capture / Auto capture / Video Capture
Cooled Enable
Only avalaible with cooled cameras
Cooled Cameras
Internal Sensor with target window (Sensor temp / Ambient temp / Ambient humidity / Dow point)
9
Moticam Pro
Moticam Pro
205A
205A 252A
282A 252A
282A 285A
285A 205B
252B 205B
CCD Sony ICX
CCD Sony ICX
1/2”
1/2” 1/1.8”
1/1.8” 2/3”
2/3” 2/3”
2/3” 1/2”
1/2” 1/1.8”
Features
Features
Resolution
Resolution
Total pixels
Total pixels 1392x1040
1.4 Mp
Number of active pixels Number of active 1360x1024 pixels Pixel Size (microns)
Pixel Size (microns) 4.65x4.65
Live display mode and capture size
Live display1360x1024 mode and capture size 680x512 320x256 Select Size (ROI)
Scan
Scan
Progressive
Maximun Frame Rate* Maximun Frame 10 frames/S Rate Buffer
Buffer
Integrated Filter
Integrated Filter
Bit Depth
Bit Depth
Shutter
Shutter
Lens mount
Lens mount
Exposure Time
Exposure Time
Data Transfer
Data Transfer
Power Supply
Power Supply
Peltier Device
Peltier Device
1.4Mp 3.2 Mp
3.25.0 MpMp
5.0Mp 1.4 Mp
1.41.4 MpMp
1.4Mp 3.2 Mp
1392x1040 2088x1550
2088x1550 2588x1960
2588X1960 1392x1040
1392x1040 1392x1040
1392x1040 2088x1550
2080x1542 1360x1024 (4:3) 2080x1542 2580x1944 (4:3)
1360x1024 2580x1944 (4:3) 1360x1024 1360x1024 (4:3)
2080x1542 1360x1024 (4:3) 2
4.65x4.65 3.45x3.45
3.45x3.45 3.40x3.40
3.40x3.40 6.45x6.45
6.45x6.45 4.65x4.65
4.65x4.65 3.45x3.45
1360x1024 2048x1536 680x512 1024x768 320x256 512x384 Select Select Size Size (ROI) (ROI)
2048x1536 2560x1920 1024x768 1280x960 512x384 640x480 Select Select Size Size (ROI) (ROI)
2560x1920 1360x1024 1280x960 680x512 640x480 340x256 Select Select Size Size (ROI) (ROI)
1360x1024 1360x1024 680x512 680x512 340x256 320x256 Select Select Size Size (ROI) (ROI)
1360x1024 2048x1536 680x512 1024x768 320x256 512x384 Select Select Size Size (ROI) (ROI)
Progressive Frame Readout 108.5 frames/S frames/S
Frame Readout
8.57frames/S frames/S
Progressive
Progressive
7 frames/S 15 frames/S 4 Frames
1510 frames/S frames/S
108.5 frames/S frames/S
4 Frames
8 bits / 12 Bits (Switchable 8 bits / 12 through Bits (Switchable MI Device, usable throughwith MI Device, application usable software with application that supports software 12 Bit) that supports 12 Continuous Variable-Speed Continuous Variable-Speed C-Mount
C-Mount
1/1000 to 6 sec
1/1000 to 6 sec
Mini USB2.0 connection mini USB2.0 connection 5V (USB)
Universal Power Supply Universal (5V) Power S
5V (USB)
Up to 10º Celsius below Up toambient 10º Celsius b 0 ~ 60º C
0 ~ 60º C
40% - 80% (35º) 40% - 80% (35º)
Operating Humidity
Camera Data Readout Camera Data Readout
Sensor Temperature,Sensor Ambient Temperature, Temperature, Ambient Relative Temperature, Humidity, Dew Relative PointHumidity, Dew Point 117mm (L) x 65mm117mm (W) x 62mm (L) x 65mm (H) (W) x 62mm (H)
Dimensions
Dimensions
Weight
Weight
Support Device
Support Device
Driver USB2 DeviceDriver / TWAIN USB2 / SDK Device / Direct / TWAIN Show/ Driver SDK / /Direct TriggerShow Port Driver (TTL) / Trigger Port (TTL)
OS Compatibility
OS Compatibility
Windows XP / Vista /Windows Seven and XP MAC / Vista OSX / Seven and MAC OSX
Software Suite
Software Suite
*under optimal illumination conditions
10
Frame
Schott BG 40 Bandpass Schott BG 40 Bandpass
Operating Temperature Operating Temperature Operating Humidity
Colour
Colour
Colour
406 gr
406 gr
546 gr
546 g
Motic Images Plus 2.0 Motic (PCImages & MAC), Plus Motic 2.0 Images (PC & MAC), Advanced Motic3.2 Images (PC), Advanced TWAIN, SDK, 3.2 (PC), MoticTWAIN, Direct Show SDK,Drivers Motic Direct Show
)
282B 285B
285B 205C
2/3” 2/3”
2/3” 1/2”
285C 205D
285C 205C 1/2” 2/3”
2/3” 1/2” Monochrome
Monochrome
Peltier
285D 205D
285DPro Moticam
Moticam Pro
1/2” 2/3”
CCD2/3” Sony ICX
CCD Sony ICX
Peltier Monochrome Peltier MonochromeFeatures
5.0Mp 1.4 Mp
1.41.4Mp Mp
1.4Mp 1.4 Mp
1.41.4Mp Mp
1.4Mp 1.4 Mp
2588X1960 1392x1040
1392x1040 1392x1040
1392x1040 1392x1040
1392x1040 1392x1040
1392x1040 1392x1040
1360x1024 2580x1944 (4:3) 1360x1024 1360x1024 (4:3)
4.65x4.65 6.45x6.45
6.45x6.45 4.65x4.65
4.65x4.65 6.45x6.45
2560x1920 1360x1024 1280x960 680x512 640x480 340x256 Select Select Size Size (ROI) (ROI)
1360x1024 1360x1024 680x512 680x512 340x256 320x256 Select Select Size Size (ROI) (ROI)
1360x1024 1360x1024 680x512 680x512 320x256 340x256 Select Select Size Size (ROI) (ROI)
1360x1024 1360x1024 680x512 680x512 340x256 320x256 Select Select Size Size (ROI) (ROI)
1360x1024 1360x1024 680x512 680x512 320x256 340x256 Select Select Size Size (ROI) (ROI)
7 15 frames/S frames/S
1510 frames/S frames/S
Progressive
1015 frames/S frames/S 4 Frames
Resolution
1392x1040 Total pixels
Total pixels
Pixel 6.45x6.45 Size (microns)
6.45x6.45 4.65x4.65
Progressive
Resolution 1.4 Mp
1360x1024 1360x1024 (4:3) 1360x1024 Number of active (4:3) pixels Number of active pixels
1360x1024 1360x1024 (4:3) 1360x1024 1360x1024 (4:3)
3.40x3.40 6.45x6.45
Readout
1360x1024 Live display mode and 680x512 capture size 340x256 Select Size (ROI) Scan
1510 frames/S frames/S
1015 frames/S frames/S
4 Frames
Schott BG 40 Bandpass Schott BG 40 Bandpass
Continuous Variable-Speed Continuous Variable-Speed C-Mount
1/1000 to 6 sec
1/1000 to 6 sec
5V (USB)
546 gr
0 ~ 60º C
Buffer
Buffer
Integrated Filter
Integrated Filter
Lens mount
Exposure Time
Exposure Time
Data Transfer
Data Transfer
Power(5V) Supply Universal Power Supply Universal (5V) Power Supply
Power Supply
Peltier Device Up to 10º Celsius below Up toambient 10º Celsius below ambient
Peltier Device
0 ~ 60º C
Operating Temperature Operating Temperature Operating Humidity
Sensor Temperature,Sensor Ambient Temperature, Temperature, Ambient Relative Temperature, Humidity, Dew Relative PointHumidity, Dew Point 117mm (L) x 65mm117mm (W) x 62mm (L) x 65mm (H) (W) x 62mm (H) 406 gr
Bit Depth
Lens mount
40% - 80% (35º) 40% - 80% (35º)
546 gr
Scan
Shutter
5V (USB)
elsius below Up toambient 10º Celsius below ambient
Live display mode and capture size
Shutter
mini USB2.0 connection mini USB2.0 connection
Power Supply Universal (5V) Power Supply (5V)
Pixel Size (microns)
15 Maximun frames/S Frame Rate Maximun Frame Rate
bits / 12 Bits (Switchable 8 bits / 12 through Bits (Switchable MI Device, usable throughwith MI Device, application usable software with application that supports software 12 Bit) that supports 12 Bit)Bit Depth
C-Mount
Features
406 gr
Camera Data Readout Camera Data Readout Dimensions
546 gr
Operating Humidity
546 gr Weight
Dimensions Weight
Driver USB2 DeviceDriver / TWAIN USB2 / SDK Device / Direct / TWAIN Show/ Driver SDK / /Direct TriggerShow Port Driver (TTL) / Trigger Port (TTL)
Support Device
Support Device
Windows XP / Vista /Windows Seven and XP MAC / Vista OSX / Seven and MAC OSX
OS Compatibility
OS Compatibility
mages Plus 2.0 Motic (PCImages & MAC), Plus Motic 2.0 Images (PC & MAC), Advanced Motic3.2 Images (PC), Advanced TWAIN, SDK, 3.2 (PC), MoticTWAIN, Direct Show SDK,Drivers Motic Direct Show Drivers Software Suite
Software Suite
11
www.motic.com
Canada | China | Germany | Spain | USA Motic is a certified ISO9001, ISO14001 and ISO13485 company. Designed in Barcelona (Spain)
Motic Incorporation Limited Copyright Š 2002-2012. All Rights Reserved. May 2012
DE | EN | ES | FR | IT | PT | RU