Mount Fluorescent Pendant
1
Install canopy base onto electrical box with mounting screws.
2
Connect neutral, line and ground wires to supply. Next install ballast with mounting plate onto canopy base.
3
Connect color coded fixture wires to ballast terminals. Connect to ground leads.
4
To attach canopy to canopy base, tighten all three Phillips mounting screws firmly.
92mm 3-5/8”
G Series
Fluorescent Pendant Installation Instructions
CAUTION Canopy Base
Mounting Screws
• Read all instructions. • Risk of fire and electrical shock. Turn off power before installation. • Do not exceed recommended wattage.
Ballast & Mounting Plate
• Remote fluorescent ballast mounting distance less than 20’ from lamp.
Phillips Mounting Screws
• Test installation by leaving fixture on for 20-30 minutes to ensure proper operation.
Carefully install lamp. (Do not exceed recommended wattage.)
Canopy
• Keep this document as a reference.
t 604.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
03-2010
5
92mm 3-5/8”
Montage du Pendant Fluorescent
1
Installer la base du canopé à la boîte électrique avec les vis de montage.
2
Connectez le fil neutre, la mise à terre et le fil de tension à la lampe. Ensuite, installez le ballast avec la plaque de montage a la base du canopé.
3 4
Pour joindre le canopé à la base du canopé serrez les trois vis de montage Phillips fermement. Installer la lampe avec soin. (Ne pas dépasser la puissance recommandée.)
92mm 3-5/8”
Séries G
Pendant Fluorescent Instructions d’installation
ATTENTION Base du canopé
Vis de montage Ballast & plaque de montage Vis de montage Phillips Canopé
• Veuillez lire toutes instructions. • Risque de feu et choc électrique, coupez le courant avant d’installer. • Ne pas dépasser la puissance recommandée. • La distance du ballast à la lampe ne doit pas dépasser 20 pieds. • Allumez la lampe pour 2030 minutes pour assurer son opération. • Gardez ce document pour référence.
Ampoule fluorescente
t 604.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. Toute information technique peut changer.
03-2010
5
Branchez les fils de couleur au ballast. Branchez la mise a terre.
92mm 3-5/8”