G Series
Mount Incandescent Table Lamp
1
Drill a 3/8” hole into the table top or mounting surface in the location for the fixture.
2
Install appropriate electrical box (not included).
3
Secure fixture to table by tightening washers and nut to underside of lamp through the table.
4
Connect neutral, line and ground wires to supply.
5
Attach electrical box cover (not included).
CAUTION • Read all instructions. • Risk of fire and electrical shock. Turn off power before installation. • Do not exceed recommended wattage. • Remote fluorescent ballast mounting distance less than 20’ from lamp. • Test installation by leaving fixture on for 20-30 minutes to ensure proper operation. • Keep this document as a reference.
Carefully install lamp and turn on fixture. (Do not exceed recommended wattage.)
Electrical Box 1/8 Plain Washer Lock Washer Steel Nut Electrical Box Cover t 604.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Mounting Screws
Copyright © MP Lighting. All technical information in this document is subject to change.
03-2010
6
Incandescent Table Lamp Installation Instructions
Séries G
Montage de la lampe de Table
1
Percez un trou de 3/8” a l’endroit où la lampe sera installée.
2
Installez la boîte électrique approprié (non inclus).
3
Installez la lampe à la table en serrant les écrous et rondelles au boulon en dessous de la table.
5
Attachez le couvercle de la boîte électrique (non inclus).
6
Installez soigneusement la lampe et allumez-la. (Ne pas dépasser la puissance recommandée).
ATTENTION • Veuillez lire toutes instructions. • Risque de feu et choc électrique, coupez le courant avant d’installer. • Ne pas dépasser la puissance recommandée. • La distance du ballast à la lampe ne doit pas dépasser 20 pieds. • Allumez la lampe pour 2030 minutes pour assurer son opération. • Gardez ce document pour référence.
Boîte électrique Rondelle 1/8 Rondelle de verrouyage Ecrou d’acier Couvercle de la boîte électrique t 604.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Vis de montage
Copyright © MP Lighting. Toute information technique peut changer.
03-2010
4
Connectez le fil neutre, la mise à terre et le fil de tension à la lampe.
Lampe Incandescente de Table Instructions d’installation