Mount G08 Fluorescent Pendant
2 3 4 5
6 7
Installation Instructions
CAUTION
Connect neutral, line and ground wires to supply. Next install ballast with mounting plate onto canopy base.
Tighten three Phillips mounting screws firmly to attach canopy to canopy base.
• Read all instructions.
Canopy Base
Mounting Screws Ballast & Mounting Plate Phillips Mounting Screws
Install the glass shade by lifting it over the socket and cord assembly. Carefully feed each hanger screw through the shade into the corresponding hole in the socket holder. To ensure the pendant hangs plumb, tighten each screw equally. DO NOT OVER TIGHTEN SCREWS (this may chip the edges of the glass). To secure the hanger screws, tighten the top setscrews on the socket holder using the 3mm driver provided. Carefully install lamp. (Do not exceed recommended wattage.)
T 604 708 1184 mplighting.com
G08
Fluorescent Pendant
Install canopy base onto electrical box with mounting screws.
Connect color coded fixture wires to ballast terminals. Connect to ground leads.
92mm 3-5/8”
• Risk of fire and electrical shock. Turn off power before installation. • Do not exceed recommended wattage. • Remote fluorescent ballast mounting distance less than 20’ from lamp. • Test installation by leaving fixture on for 20-30 minutes to ensure proper operation. • Keep this document as a reference.
Canopy
Copyright © MP Lighting All technical information in this document is subject to change.
1
92mm 3-5/8”
Version 12-2008