Copyright 2011 Š MP Lighting.
L01 www.mplighting.com
1 877 708 1184
1W / 2.5W In-ground LED
L01 Application: Outdoor/indoor directional or indicator light for uplighting walls columns and signage from the ground. Source: 1W LED powered by remote 120V primary, 350mA driver or 2.5W LED powered by remote 120V primary, 700mA (2.5W) driver (not included).
Input Current: 350mA (1W) / 700mA (2.5W) Input Voltage: 4V DC Power Consumption: 1W / 2.5W Recommended Driver: LED10W350D (1W) and LED17W700D (2.5W). Dimmable drivers
Ø4-1/8” Ø105mm
available (not included). Consult factory.
Ø2-1/4” Ø57mm
Weight: 1.8lbs net. (0.816kg) (base extra). Material: Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass
Ø1-5/8” Ø41mm
Mounting: Comes with splice box, aluminum flange and level gauge. Can be buried in earth/
2-3/4” 70mm
lens, suitable for walk-over and drive-over applications.
gravel or cast into concrete with or without mounting base.
1/8” 3mm
Concrete pouring line
Standard flange 7/8” (22mm)
Approval: Wet and dry locations. Approved to US and Canadian standards by CSA. 4-7/8” 124mm
66
Base Height
Note: Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult MP Lighting factory.
Splice box with 1/2 NPT I/O ports for connector and wiring.
Shown with standard flange (S) and (optional) mounting base.
L01 1W, 12° 3000K Std 85 lm
Polar Candela Distribution
Illuminance at a Distance
paving stone
180°
Center Beam FC
-45°
45°
approx. 700 cd max.
-90°
90°
Beam Width
1.5’
303.82
0.4’
0.4’
3.0’
75.95
0.7’
0.8’
4.5’
33.76
1.1’
1.2’
6.0’
18.99
1.5’
1.6’
7.5’
12.15
1.9’
2.0’
0° Spread: 14.1°
9.0’
8.44
2.2’
2.3’
90° Spread: 14.9°
Paving stone flange 3-5/8” (92mm)
sand
Shown with paving stone flange (P) with no base.
0°
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
Code
L01
Wattage
Color
Beam
Lens
Angle Bracket
-
Flange Height
Base Height
Finish
1 = 1W W27S = 2700K, std CRI 1 = 12° 2 = 2.5W* W30S = 3000K, std CRI 3 = 30° W35S = 3500K, std CRI 12 = 120° W41S = 4100K, std CRI W30H = 3000K, high CRI
C = clear F = frosted LM = louver, matte anodized LB = louver, black anodized
0 = no angle 30 = 30° angle X = custom (30° max.)
S = standard flange 5/8” (17mm) P = paving stone flange, 3-3/8” (86mm)
0 = no base 2 = 2” (51mm) 6 = 6” (152mm) X = custom height
MA = matte clear anodized BA = black anodized BZ = bronze S3 = stainless steel 303 S6 = stainless steel 316
*Only available in W30S (3000K, std CRI).
Note: Louver is only available in clear lens.
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada