1W/2.5W Walkway
L02
SPEC SHEET Application: Wall mounted directional or indicator light for stairs, ramps and aisle illumination. Electrical: 1W LED powered by remote 120V primary, 350mA driver or 2.5W LED powered by remote 120V primary, 700mA driver (not included). Input Current: 350mA (1W) / 700mA (2.5W) Input Voltage: 4V DC Power Consumption: 1W / 2.5W Recommended Driver: LED8W350L (1W) and LED17W700D (2.5W). Dimmable drivers available (not included). Consult factory. Weight: 0.35lbs (0.158kg) Material: Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens. Mounting: Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1.5” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.
Shown with angle bracket 1” 25mm
Approval: Dry locations. Approved to US and Canadian standards by CSA.
3-1/2” 89mm
1/8” (3mm) Face of drywall
53
7/8” 22mm Note: Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult MP Lighting factory. Ø2-1/4” Ø57mm
Angle Ø2-1/4” Ø57mm
Type: Project:
Ø1-3/4” Ø44mm
Ø4-1/8” Ø105mm
1-3/4” 44mm
Modified:
1-3/4” 44mm
Quantity: Notes:
Code L02
Wattage
Color
Beam
Lens
Angle Bracket
-
Finish -
1 = 1W 2 = 2.5W*
W27S W30S W35S W41S W30H
= 2700K, std CRI = 3000K, std CRI = 3500K, std CRI = 4100K, std CRI = 3000K, high CRI
12 = 12° beam 30 = 30° beam 120 = 120° beam
C = clear F = frosted LM = louver, matte anodized LB = louver, black anodized
0 30 45 X
= no angle = 30° angle = 45° angle = custom (45° max.)
MA BA S3 S6
= matte clear anodized = black anodized = stainless steel 303 = stainless steel 316
*Only available in W30S (3000k, std CRI) Note: Louver is only available in clear lens.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011
1W/2.5W Walkway
L02
SPEC SHEET Photometric Data
L02 1W, 12° 3000K Std 85 lm
Polar Candela Distribution 180°
135°
2 4
90°
-0°
approx. 650 cd max. 0°
-90°
1
0.5
0.2 0.1 fc
8
Step 2
= Correction Factor (CF)
CF x Footcandle = New Mounting Height FC
Note: Information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Isofootcandle Plot
135°
2 4
6 8 10 12 14 16 18
8 6 4 90°
-0°
approx. 260 cd max. 0°
-90°
2 0 2 4 6
Mount height: 1 ft Total LLF: 1
Polar Candela Distribution 180°
1 0.5 0.2 0.1 fc
8
45°
Isofootcandle Plot
135°
1 2 3 4 5 6 7 8 9 8 6 4
-90°
90°
-0°
approx. 33 cd max. 0°
L02 2.5W, 12° 3000K Std 162 lm
Existing Mounting Height² New Mounting Height²
Mount height: 1 ft Total LLF: 1
Polar Candela Distribution 180°
Step 1
2 0 2 4 6
45°
-90°
L02 1W, 120° 3000K Std 85 lm
6 8 10 12 14 16 18
8 6 4 -90°
L02 1W, 30° 3000K Std 85 lm
Height Conversion Formula
Isofootcandle Plot
-90°
2 0 2 4 6 8
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution 180°
2.5 0.5 0.2 0.1 fc
Isofootcandle Plot
135°
0
4
8
12
16
20
24
8 4 -90°
90°
0
1 0.5
0.2 0.1 fc
4
-0°
approx. 1250 cd max. 0°
45°
-90°
8 10
Mount height: 1 ft Total LLF: 1
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011
1W/2.5W Walkway
L02
SPEC SHEET Photometric Data
L02 2.5W, 30° 3000K Std 162 lm
Polar Candela Distribution 180°
Height Conversion Formula
Isofootcandle Plot
135°
0
4
8
12
16
20
24
Step 1
8
New Mounting Height²
4 -90°
90°
0
2.5
0.5 0.2 0.1 fc
4
-0°
approx. 480 cd max. 0°
L02 2.5W, 120° 3000K Std 162 lm
-90°
8 10
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution 180°
Existing Mounting Height²
Step 2
= Correction Factor (CF)
CF x Footcandle = New Mounting Height FC
Note: Information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Isofootcandle Plot
135°
1 2 3 4 5 6 7 8 9 8 6 4
-90°
90°
-0°
approx. 30 cd max. 0°
45°
-90°
2 0 2 4 6
10
1
0.2 0.1 fc
8
Mount height: 1 ft Total LLF: 1
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011