1W/2.5W Submersible
L03
SPEC SHEET Application: Submersed fresh water illumination to 12” (305mm) depth. Perfect for core drilling retrofits without back box and flange. Electrical: 1W LED powered by remote 120V primary, 350mA driver or 2.5W LED powered by remote 120V primary, 700mA driver (not included). Input Current: 350mA (1W) / 700mA (2.5W) Input Voltage: 4V DC Power Consumption: 1W / 2.5W Recommended Driver: LED10W350D (1W) and LED17W700D (2.5W). Dimmable drivers available (not included). Consult factory.
Shown with flange only 3” 76mm
1/8” 3mm Concrete pouring line
Weight: 2.45lbs (1.111kg)
3-1/2” 89mm
Material: Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens and 6’ (1829mm) Cabtire lead. Mounting: Comes with mounting box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete for submersed applications.
Ø2-1/4” Ø57mm
Approval: Submersible. Approved to US and Canadian standards by CSA.
1-1/8” 29mm
68 Note: Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult MP Lighting factory. Shown with mounting box
No angle bracket
4-3/8” 111mm
Shown as with angle bracket
Type:
Buna rubber gasket sealing, tight to keep Ø1-5/8” in position even when upside down. Ø41mm Angle
Ø4-1/8” Ø105mm
Project: Modified: Quantity: Notes:
Mounting box with 1/2 NPT I/O ports for connector and wiring. 4-3/8” 111mm
Code L03
Wattage 1 = 1W 2 = 2.5W*
Mounting box with 1/2 NPT Color I/O ports for connector and wiring. W27S W30S W35S W41S W30H
= 2700K, std CRI = 3000K, std CRI = 3500K, std CRI = 4100K, std CRI = 3000K, high CRI
Beam
Lens
Angle Bracket
Mounting
Lead Length
Finish
1 = 12° 3 = 30° 12 = 120°
0 = no angle 30 = 30° angle X = custom (30° max.)
B = mounting box F = flange only
MA BA S3 S6
= matte clear anodized = black anodized = stainless steel 303 = stainless steel 316
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011
C = clear F = frosted LM = louver, matte anodized LB = louver, black anodized
6 = 6’ lead X = custom
*Only available in W30S (3000k, std CRI) Note: Louver is only available in clear lens.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
1W/2.5W Submersible
L03
SPEC SHEET Photometric Data
L03 1W, 12° 3000K Std 85 lm
Polar Candela Distribution 180°
135°
2 4
90°
-0°
approx. 650 cd max. 0°
-90°
1
0.5
0.2 0.1 fc
8
Step 2
= Correction Factor (CF)
CF x Footcandle = New Mounting Height FC
Note: Information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Isofootcandle Plot
135°
2 4
6 8 10 12 14 16 18
8 6 4 90°
-0°
approx. 260 cd max. 0°
-90°
2 0 2 4 6
Mount height: 1 ft Total LLF: 1
Polar Candela Distribution 180°
1 0.5 0.2 0.1 fc
8
45°
Isofootcandle Plot
135°
1 2 3 4 5 6 7 8 9 8 6 4
-90°
90°
-0°
approx. 33 cd max. 0°
L03 2.5W, 12° 3000K Std 162 lm
Existing Mounting Height² New Mounting Height²
Mount height: 1 ft Total LLF: 1
Polar Candela Distribution 180°
Step 1
2 0 2 4 6
45°
-90°
L03 1W, 120° 3000K Std 85 lm
6 8 10 12 14 16 18
8 6 4 -90°
L03 1W, 30° 3000K Std 85 lm
Height Conversion Formula
Isofootcandle Plot
-90°
2 0 2 4 6 8
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution 180°
2.5 0.5 0.2 0.1 fc
Isofootcandle Plot
135°
0
4
8
12
16
20
24
8 4 -90°
90°
0
1 0.5
0.2 0.1 fc
4
-0°
approx. 1250 cd max. 0°
45°
-90°
8 10
Mount height: 1 ft Total LLF: 1
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011
1W/2.5W Submersible
L03
SPEC SHEET Photometric Data
L03 2.5W, 30° 3000K Std 162 lm
Polar Candela Distribution 180°
Height Conversion Formula
Isofootcandle Plot
135°
0
4
8
12
16
20
24
Step 1
8
New Mounting Height²
4 -90°
90°
0
2.5
0.5 0.2 0.1 fc
4
-0°
approx. 480 cd max. 0°
L03 2.5W, 120° 3000K Std 162 lm
-90°
8 10
Mount height: 1 ft Total LLF: 1
45°
Polar Candela Distribution 180°
Existing Mounting Height²
Step 2
= Correction Factor (CF)
CF x Footcandle = New Mounting Height FC
Note: Information is based on the most current data available; however, various operating factors such as reflectances and application type may cause differences between lab and field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information.
Isofootcandle Plot
135°
1 2 3 4 5 6 7 8 9 8 6 4
-90°
90°
-0°
approx. 30 cd max. 0°
45°
-90°
2 0 2 4 6
10
1
0.2 0.1 fc
8
Mount height: 1 ft Total LLF: 1
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
01-2011