Copyright 2011Š MP Lighting.
L112 www.mplighting.com
1 877 708 1184
Dual Linear Downlight
L112 3-3/8” 86mm
Application: Indoor linear downlight Source: 2.5W LEDs (12.5W/Ft). Powered by 120V or 277V integral driver.
2-5/8” 67mm
2-5/8” 67mm
Input Current: 0.1A/foot Input Voltage: 120V or 277V
3-3/8” 86mm
Power Consuption: 12.5W/foot Dimming: Dimmable with 0-10V dimming controller (not included). Consult factory for details .
2-5/8” 67mm
Weight: 10lbs (4.73kg) with 4’ length fixture.
6-5/8” 168mm
Material: Anodized aluminum with white reflectors. 2-3/8” 60mm
Mounting: Can be mounted directly by rod & cable suspension sets (sold separately). Approval: Dry locations. Approved to US and Canadian standards by length) CSA. L (circuit board
6-5/8” 168mm
1/8” 3mm
20
L112 4’ Length S2 Spacing 90° 3000K Std 4309 lm
2-3/8” 60mm
Polar Candela Distribution
1/8” 3mm
L (circuit board length)
Illuminance at a Distance
180° -90°
Center Beam FC
90°
-45°
approx. 1900 cd max.
45°
Beam Width
1.5’
879.60
3.0’
2.5’
3.0’
219.90
6.0’
4.9’
4.5’
97.73
9.1’
7.4’
6.0’
54.98
12.1’
9.8’
7.5’
35.18
15.1’
12.3’
0° Spread: 90.3°
9.0’
24.43
18.1’
14.7’
90° Spread: 78.5°
0°
Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%
RCC %: RW %: RCR: 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 1.19 1.19 1.19 1.19 1.16 1.16 1.16 1.00 1.11 1.11 1.11 1.06 1.06 1.06 1.02 1.02 1.02 1.11 1.07 1.04 1.01 1.09 1.05 1.02 .89 1.01 .98 .96 .97 .95 .93 .94 .92 .91 1.03 .96 .91 .86 1.00 .94 .89 .79 .91 .87 .83 .88 .84 .81 .85 .82 .79 .95 .86 .80 .74 .93 .85 .79 .69 .82 .77 .72 .79 .75 .71 .77 .73 .70 .88 .78 .70 .65 .86 .77 .70 .61 .74 .68 .63 .72 .67 .63 .70 .66 .62 .82 .71 .63 .57 .80 .70 .62 .55 .68 .61 .56 .66 .60 .56 .64 .59 .55 .76 .64 .56 .51 .74 .63 .56 .49 .62 .55 .50 .60 .54 .50 .59 .53 .49 .71 .59 .51 .45 .69 .58 .51 .44 .57 .50 .45 .55 .49 .45 .54 .49 .44 .66 .54 .46 .41 .65 .53 .46 .40 .52 .45 .41 .51 .45 .40 .50 .44 .40 .62 .50 .42 .37 .61 .49 .42 .37 .48 .42 .37 .47 .41 .37 .46 .41 .37 .58 .46 .39 .34 .57 .46 .39 .33 .45 .38 .34 .44 .38 .34 .43 .37 .34
0 0 1.00 .89 .77 .68 .60 .53 .47 .43 .38 .35 .32
Shown with SDF065 and CPY052 configuration.
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
Code
L112
Wattage
-
Length (l)
2 2 = 2.5W LEDs
4 = 4’ (1219mm) 8 = 8’ (2438mm)
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011
Spacing (S)
color
S3
W30S
S3 = 2.75” (70mm) between LEDs
W30S = 3000K, std CRI
Finish
-
MA MA = matte clear anodized
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada