Dual Linear Downlight
L112
SPEC SHEET Application: Indoor linear downlight. Electrical: 2.5W LEDs (12.5W/Ft). Powered by 120V or 277V integral driver. Input Current: 0.1A/foot Voltage: 120V or 277V Power Consumption: 12.5W/foot Dimming: Dimmable with TLDAV100W24 with 0~10V 2-5/8” dimming controller (TLC010i, not included). 67mm Consult factory.
3-3/8” 86mm Input
2-5/8” 67mm
Weight: 9.80lbs (4.44kg)/foot. Material: Anodized aluminum with white reflectors. Mounting: Can be mounted directly by rod & cable suspension sets (sold separately).
6-5/8” 168mm
Approval: Dry locations. Approved to US and Canadian standards by CSA. 20
2-3/8” 60mm
1/8” 3mm
L (circuit board length)
3-3/8” 86mm
Type: Project: Modified:
2-5/8” 67mm
2-5/8” 67mm
Quantity: Notes:
6-5/8” 168mm
Shown with SDF065 and CPY052 configuration 2-3/8” 60mm
1/8” 3mm
Code L112
Wattage -
Length (l)
2 2 = 2.5W LEDs
4 = 4’ (1219mm) 8 = 8’ (2438mm)
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
spacing (S)
color
S3
W30S
S3 = 2.75” (70mm) between LEDs
W30S = 3000k, std CRI
Finish -
MA MA = matte clear anodized
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011
Dual Linear Downlight
L112
SPEC SHEET Photometric Data
L112 4’ Length S2 Spacing 90° 3000K Std 4309 lm
Polar Candela Distribution
Illuminance at a Distance
180° -90°
Center Beam FC
90°
-45°
approx. 1900 cd max.
45°
Beam Width
1.5’
879.60
3.0’
2.5’
3.0’
219.90
6.0’
4.9’
4.5’
97.73
9.1’
7.4’
6.0’
54.98
12.1’
9.8’
7.5’
35.18
15.1’
12.3’
0° Spread: 90.3°
9.0’
24.43
18.1’
14.7’
90° Spread: 78.5°
0°
Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%
RCC %: RW %: RCR: 0 1 2 3 4 5 6 7 8 9 10
80
70
50
30
10
70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 1.19 1.19 1.19 1.19 1.16 1.16 1.16 1.00 1.11 1.11 1.11 1.06 1.06 1.06 1.02 1.02 1.02 1.11 1.07 1.04 1.01 1.09 1.05 1.02 .89 1.01 .98 .96 .97 .95 .93 .94 .92 .91 1.03 .96 .91 .86 1.00 .94 .89 .79 .91 .87 .83 .88 .84 .81 .85 .82 .79 .95 .86 .80 .74 .93 .85 .79 .69 .82 .77 .72 .79 .75 .71 .77 .73 .70 .88 .78 .70 .65 .86 .77 .70 .61 .74 .68 .63 .72 .67 .63 .70 .66 .62 .82 .71 .63 .57 .80 .70 .62 .55 .68 .61 .56 .66 .60 .56 .64 .59 .55 .76 .64 .56 .51 .74 .63 .56 .49 .62 .55 .50 .60 .54 .50 .59 .53 .49 .71 .59 .51 .45 .69 .58 .51 .44 .57 .50 .45 .55 .49 .45 .54 .49 .44 .66 .54 .46 .41 .65 .53 .46 .40 .52 .45 .41 .51 .45 .40 .50 .44 .40 .62 .50 .42 .37 .61 .49 .42 .37 .48 .42 .37 .47 .41 .37 .46 .41 .37 .58 .46 .39 .34 .57 .46 .39 .33 .45 .38 .34 .44 .38 .34 .43 .37 .34
0 0 1.00 .89 .77 .68 .60 .53 .47 .43 .38 .35 .32
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011