92mm 3-5/8”
Connect fixture wires to low voltage wiring (remote LED driver 9W 700mA constant current).
L131
Installation Instructions
CAUTION • Read all instructions.
Electrical Box
2
Align LED housing to electrical box.
3
Tighten mounting screws to secure LED housing.
4
For outdoor application use exterior rated enclosure compatible with local electrical code.
Waterproof Wire Nuts
Attach cover to LED housing by tightening all three screws.
• WARNING: RISK OF FIRE OR ELECTRICAL SHOCK: Do not make or alter any openings in the compartment of wiring or electrical components during installation. Do not alter or add ballasts, or any other electrical components. • Installation and use of this fixture mounting assembly requires a person familiar with the construction and operation of luminaire electrical systems and the hazards involved, if not qualified, do not attempt installation. • Turn off power before installation. • Connect to 9W 700mA constant current LED driver only.
LED9W700 AC Input Voltage: 120V, 60Hz DC Output Current: 700mA Constant
• Do not over tighten screws.
LED Housing
• Avoid using detergents with hand softeners, anti-bacterial agents, glass cleaners or acrylic cleaning products. • KEEP THESE INSTALLATION INSTRUCTIONS.
Mounting Screws
Hex Countersunk Screws
Parts
Qty.
• LED Unit • Mounting Screws • Hex Countersunk Screws • Waterproof Wire Nuts • LED Driver 9W 700mA
1 2 3 4 1
Maintenance Clean using a soft cloth.
T 604 708 1184 mplighting.com
Cover
Copyright © MP Lighting All technical information in this document is subject to change.
1
92mm 3-5/8”
Version 11-2009