Copyright 2011Š MP Lighting.
L161 www.mplighting.com
1 877 708 1184
Display Case Lighting
L161
Shown as C1CB ceiling mount. Ø2-3/8” Ø60mm
2” 51mm
Application: Display case, wall wash, or picture illumination. Source: 1W LEDs (6W/Ft). Powered by remote driver (not included).
1/4” 6mm
Input Current: 350mA
stem 1-1/8” 29mm min.
2” 51mm
Input Voltage: 4V DC/LED module Power Consumption: 6W/Ft 1” 25mm
Recommended Driver: TLDAV100W24. Dimmable withe TLC010i dimming controller (not included). Consult factory.
1” 25mm
1” 25mm
length
Shown as C1C ceiling mount.
Weight: 1.82lbs (0.827kg).
J-box (not included)
Material: Anodized aluminum.
Ø2-3/8” Ø60mm
Mounting: Ceiling or wall mount. C1C & C2C mount to custom 2” x 2” octagonal electrical box (included). C1M & C2M retrofit to existing standard J-box using custom mounting plate (included). Also available with mounting bracket from millwork installations. Comes with 6’ (1829mm) wire lead.
Surface level
1/4” 6mm
Approval: Dry locations. Approved to US and Canadian standards by CSA.
stem 1-1/8” 29mm min.
2” 51mm
40
1” 25mm
1” 25mm
length
1” 25mm
length
1” 25mm
Shown as C1M ceiling mount.
L02 1W, 12° 3000K Std 85 lm
Polar Candela Distribution 180°
Isofootcandle Plot
135°
2 4
1” 25mm
6 8 10 12 14 16 18
8 6 4 -90°
2 0 2 4 6
90°
-0°
approx. 650 cd max. 0°
1” 25mm
1
0.5
0.2 0.1 fc
stem
Ø1-5/8” Ø41mm
8
-90°
2” 51mm
1-3/8” 35mm min.
Mount height: 1 ft Total LLF: 1
45°
Shown as MB (mount bracket) mount.
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
Code
Mount
L161
Length
Color
Stem
C1C = Ø2-3/8” x 1/4” canopy w/ custom electrical box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate MB = mount bracket
Finish
12 = 12” (305mm) 18 = 18” (457mm) 24 = 24” (610mm) X = custom up to 48” (1219mm)
W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI* W30H = 3000K, high CRI
0 = no stem 6 = 6” (152mm) 12 = 12”(305mm) X = custom up to 24” (610mm)
MA = matte clear anodized BA = black anodized
*W20H has consistent binning that falls within 1.5 MacAdam ellipse.
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada