Copyright 2011Š MP Lighting.
L171 www.mplighting.com
1 877 708 1184
Linear Rail Light
L171 Application: Outdoor/indoor wall grazing illumination. Electrical: 1W LEDs (4W or 6W/Ft). Powered by remote driver (not included). Input Current: S2 = 350mA/foot S3 = 230mA/foot Power Consumption: S2 = 6W/foot S3 = 4W/foot Recommended Driver: TLDAV100W24. Dimmable withe TLC010i dimming controller (not included). Consult factory. Material: Heavy duty powder coated aluminum housing with tempered glass. Replaceable internal potted circuit boards and LEDs mounted to extruded aluminum heat sink bracket.
2-1/4” 57mm
1-5/8” 41mm S (LED spacing)
Mounting: Wall, ceiling or surface mounted via adjustable and lockable mounting bracket (2 mounting brackets included).
5” 127mm
2-1/4” 57mm
2-3/4” 70mm
Approval: Wet and dry locations. Approved to US and Canadian standards by CSA.
1-3/4” 44mm
65
1-3/4” 45mm
L (length)
Note: Standary 6’ (1829mm) 18 AWG water proof electrical lead is rear mounted to enable continuous row mounting. 180° max.
L02 1W, 12° 3000K Std 85 lm
Polar Candela Distribution 180°
Isofootcandle Plot
135°
2 4
6 8 10 12 14 16 18
8 6 4 -90°
2 0 2 4 6
90°
-0°
approx. 650 cd max. 0°
1
0.5
0.2 0.1 fc
8
-90°
Mount height: 1 ft Total LLF: 1
45°
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
Code
L171
Length (l)
Spacing (S)
color
beam
-
lead length
2 = 2’ (610mm) 4 = 4’ (1219mm)
S2 = 2” (51mm) S3 = 3” (76mm) between LEDs
Copyright © MP Lighting. All technical information in this document is subject to change.
W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI
02-2011
12 = 12˚ beam 30 = 30˚ beam
finish
MP 6 = 6’ (1829mm) std X = custom
MP = matte pewter
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada