Copyright 2011Š MP Lighting.
Shown as C1 canopy mount with no accessories (NA).
L221 www.mplighting.com
1 877 708 1184
4W/10W Spot Light
3-5/8” 92mm
C1C
C1C Ø57mm
C1M
L221
C1M C1M C1C Mounting options C1C
Ø4-5/8” Ø117mm
3-1/2” 89mm 1/4” 6mm
Application: Indoor directional light for wall, picture, or signage illumination. Source: 4 x 1W LEDs or 4 x 2.5W powered by remote 350mA (4W) or 700mA (10W) driver (not included). Input Current: 350mA (4W) / 700mA (10W)
C2C
C1M C2C
C1M C1C C2C
2” 51mm
6-1/4” 159mm
C2M
C2C C2M
C1M C2M C2C C3
C3 C2M
C3 C2C C2M C4
Material: Anodized aluminum.
C4 C3
Mounting: C1C & C2C mount to custom 2” x 2” octagonal electrical box (included). C1M & C2M retrofit to existing standard J-box using custom mounting plate (included). C3 & C4 mount to standard J-box (not included). Can also mount to 15V MP Lighting DC and SR rail systems as well as the MP Lighting 1-Circuit and 3-Circuit Track (sold separately).
C4 C3 C2M C5
C5 C4
C5 C4 C3
Ø2-1/4” Ø57mm
Input Voltage: 15V DC Power Consumption: 4W / 10W
3-5/8” 92mm
Recommended Driver: TLDAV100W15. Dimmable with TLC010i dimming controller, 0~10V dimming (not included).
Shown as C3 canopy mount with NA (no accessory).
Weight: 0.77lbs (0.351kg).
DC
Accessories:
Accessories: Multiple accessories can be selected, up to two lenses and a shroud (sold separately).
C5 DC
Approval: Dry locations. Approved to US and Canadian standards by CSA.
Shroud
C5 C4 DC SR
Elongator/ Spreader
Louver
20 DC SR
C5 DC SR SF
SF
SF
SR Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED 1CT SF Lamp Index located in the “Downloads”
DC 1CT SR
CAUTION A 15V LED driver must be used as the power supply. Using a traditional low voltage 12V transformer to power the system will not work and will damage LEDs. L221 4 x 1W, 20° 3000K Std 340 lm
Polar Candela Distribution 180° -90°
Center Beam FC
90°
-45°
approx. 1100 cd max. 0°
Code
Illuminance at a Distance
Mount
45°
368.97
0.8’
0.8’
3.0’
92.24
1.5’
1.6’
4.5’
41.00
2.3’
2.4’
6.0’
23.06
3.1’
3.2’
7.5’
14.76
3.9’
4.0’
0° Spread: 29.0°
9.0’
10.25
4.6’
4.8’
90° Spread: 29.8°
section of each product webpage for the most current information.
SR
3CT SF 1CT
1CT
wattage
color
beam
Stem
3CT fixture Finish 1CT
Access0ries**
C1C = Ø2-3/8” x 1/4” canopy w/ custom electrical box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom electrical box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy C5 = Ø4-5/8” x 1-1/8” canopy DC = dual circuit/15V SR = single rail/15V 1C = 1 circuit track (4W only) 3CT = 3 circuit track (silver adaptor finish)
1CT SF
3CT
track type (1CT only)
L221
Beam Width
1.5’
L = Lightolier H = Halo J = Juno 2 = 2-wire
4 = 4W 1 = 10W*
W27S = 2700K, 2 = 20° std CRI 4 = 40° W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI
2 = 2” stem X = custom length
3CT NA = no accessory BE = beam elongator CS = crystal spreader MS = mistlite spreader ELB = eggcrate louver, black SH = metal shroud SHB = metal shroud, black
adaptor Finish (1ct only)
M M = 3CT matte clear anodized
W = white B = black
3CT
*10W only available in W30S and W41S. **Multiple accessories can be selected.
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada