Copyright 2011Š MP Lighting.
Shown as SR (single rail) mount with SH (metal shroud) accessory.
L222 www.mplighting.com
1 877 708 1184
6W Spot Light
C1C
C1C C4
L222
C1C C1M C5
2” 51mm
Application: Indoor directional light for wall, picture, or signage illumination. Source: 6 x 1W LEDs powered by remote 24V driver (not included).
Input Voltage: 24V DC
3-5/8” 92mm
Power Consumption: 6W
C2M
Ø2-1/4” Ø57mm C2C C4 C2M C3
C3 C2M C5 C4
C2C C3 SF C2M
Material: Anodized aluminum.
2”
8-1/4” 210mm
51mm Mounting: C1C & C2C mount to custom 2” x 2” octagonal electrical box (included). C1M & C2M retrofit to existing standard J-box using custom mounting plate (included). C3, C4 & C5mount to standard J-box (not included). Can mount to 24V MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor.
C3 C4
C3 C2M C4 1CT
3-1/4” 83mm Ø2-1/4” Ø57mm
3-5/8”
92mm Accessories: Multiple accessories can be selected, up to two lenses and a 4-3/8” shroud (sold separately).
C5 DC
C4 C5
C3 C4 C5
SR DC
Shown as SR (single rail) mount with SH (metal shroud) accessory.
110mm
Approval: Dry locations. Approved to US and Canadian standards by CSA.
3CT C4 C5
Accessories*
20
C5 SF DC
DC
CAUTION: LED driver must be used as the power supply. Using a traditional low voltage 12V transformer to power the system will not work and will damage LEDs. Polar Candela Distribution
SR
Shroud
Illuminance at a Distance
180° -90°
Center Beam FC
90°
-45°
approx. 900 cd max.
45°
Beam Width
Louver
Elongator/ Spreader
C5
1.5’
411.79
0.9’
09’
3.0’
102.95
1.9’
1.9’
4.5’
45.75
2.8’
2.8’
6.0’
25.74
3.7’
3.7’
7.5’
16.47
4.7’
4.6’
0° Spread: 34.5°
9.0’
11.44
5.6’
5.6’
90° Spread: 34.4°
Mount
track type (1CT only)
L222
Color
Stem
C1C = Ø2-3/8” x 1/4” canopy L = Lightolier w/ custom electrical box H = Halo J = Juno C1M = Ø2-3/8” x 1/4” canopy 2 = 2-wire w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom electrical box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy C5 = Ø4-5/8” x 1-1/8” canopy DC24 = dual circuit/24V SR24 = single rail/24V SF24 = single rail flush wall/24V 1CT = 1 circuit track 3CT = 3 circuit track (silver adaptor finish)
Copyright © MP Lighting. All technical information in this document is subject to change.
12-2010 02-2011
2 = 2” stem X = custom length
SF SR 1CT 3CT SF 1CT
SF 1CT SR
SF 1CT fixture Finish
Access0ries*
W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI
DC 1CT SF SR
DC SR Note: Various operating factors may cause differences between lab and field results. As specifications may change SF DC without notice, please refer to the LED SR Lamp Index located in the “Downloads” section of each product webpage for the most current information.
0°
Code
C1M C2C C3
C2C C2M SR
Weight: 0.77lbs (0.351kg).
L222 25° 3000K Std 510 lm
C2M 8-1/4” C2C 210mm
C1M
4-3/8” 110mm
Recommended Driver: TLDAV100W24. Dimmable with TLC010i dimming controller, 0~10V dimming (not included). Consult factory.
Mounting options C1C C1M
C1C C1M C2C DC
3-1/4” 83mm
Input Current: 350mA
C2C C1M
M
3CT M 1CT = matte
NA = no accessory BE = beam elongator clear anodized CS = crystal spreader MS = mistlite spreader 3CT ELB = eggcrate louver, black SH = metal shroud SHB = metal shroud, black
3CT 1CT adaptor Finish (1ct only) 3CT
W = white B = black 3CT
3CT *Multiple accessories can be selected.
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada