Copyright 2011 Š MP Lighting.
Shown as curved dual circuit rail L72DC24-W27S30-1MA
L72 www.mplighting.com
1 877 708 1184
12 x 1W Spot Light
C1C
L72
Mounting options
C1C C1M
Application: Indoor directional light for wall, picture, or signage illumination.
10-7/8” 279mm max.
Source: 12 x 1W LEDs powered by 700mA remote driver (not included).
7” 178mm C1M max. C2C
Input Current: 700mA Input Voltage: 24V DC Power Consumption: 12W
3-7/8” 98mm
4-7/8” 124mm
Recommended Driver: LED20W700i. Dimmable with remote 100W 24V LED driver and controller, 0~10V dimming (not included). Consult factory.
C2C C2M
Weight: 0.925lbs (0.42kg). C3 C2M
Material: Anodized aluminum. Mounting: C1C & C2C mount to custom 2” x 2” octagonal electrical box (included). C1M & C2M retrofit to existing standard J-box using custom mounting plate (included). C3 & C4 mount to standard J-box (not included). Can also mount to 24V MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately).
10-7/8” 279mm max.
C4 C3
7” 178mm max.
Approval: Dry locations. Approved to US and Canadian standards by CSA. 3-7/8” 98mm
4-7/8” 124mm
20
CAUTION: LED driver must be used as the power supply. Using a traditional low voltage 12V transformer to power the system will not work and will damage LEDs.
C4 DC
Shown as DC rail mount (dual circuit) DC SR
L72 12° 3000K Std 1020 lm
Polar Candela Distribution
Illuminance at a Distance
SF
180° -90°
Center Beam FC
90°
-45°
approx. 7000 cd max.
45°
Beam Width
SR
1.5’
3,163.55
0.4’
0.4’
3.0’
790.89
0.9’
0.9’
4.5’
351.51
1.3’
1.3’
6.0’
197.72
1.8’
1.8’
7.5’
126.54
2.2’
2.2’
0° Spread: 16.7°
9.0’
87.88
2.6’
2.6’
90° Spread: 16.6°
SF 1CT
0°
1CT
Note: Various operating factors may cause differences between lab and field results. As specifications may change without notice, please refer to the LED Lamp Index located in the “Downloads” section of each product webpage for the most current information.
Code
Mount
L72
Color
Beam
C1C = Ø2-3/8” x 1/4” canopy w/ custom electrical box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom electrical box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC24 = dual circuit/24V SR24 = single rail/24V SF24 = single rail flush wall/24V 3CT = 3 circuit track*
3CT
Stem
fixture Finish
W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W30H = 3000K, high CRI
Copyright © MP Lighting. All technical information in this document is subject to change.
02-2011
12 = 12° 30 = 30° 60 = 60°
MA 1 = 1” (25mm) X = custom length
MA = matte clear anodized
adaptor finish* (3ct only) 3CT
S = silver
t 1.877.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada