Copyright © MP Lighting All technical information in this document is subject to change.
T 604 708 1184 mplighting.com
1
Connect line voltage wires including ground wire. 120 volts only.
2
mm 92 5/8” 3-
Align canopy and crossbar to electrical box.
mm 92 5/8” 3-
Waterproof Wire Nuts
• For outdoor application use exterior rated enclosure compatible with local electrical code.
Universal Crossbar
3
Tighten screws with Allen Key.
Canopy
92mm 3-5/8” 92mm 3-5/8”
• For cast in concrete use appropriate box rated for cast in concrete. Consult local electrical code.
• Read all instructions. CAUTION
Version 07-2009
• WARNING: RISK OF FIRE OR ELECTRICAL SHOCK: Do not make or alter any openings in the compartment of wiring or electrical components during installation. Do not alter or add ballasts, or any other electrical components.
Parts
• Installation and use of this fixture mounting assembly requires a 83mm person familiar with the construction and operation 3-1/4”of luminaire electrical systems and the hazards involved, if not qualified, do not attempt installation.
• LED unit • Universal crossbar • Waterproof wire nuts
• Turn off power before installation.
Tools
• Integral driver connect to 120V only.
• Allen key
• Do not spray water on fixture during cleaning. Avoid using detergents with hand softeners, anti-bacterial agents, glass cleaners or acrylic cleaning products.
Maintenance
• KEEP THESE INSTALLATION INSTRUCTIONS.
Qty. 1 1 2
included
Use a soft cloth to clean and remove any fingerprints.
83mm 3-1/4”
LED91 Installation Instructions