01-2010
High Power Constant Current LED Driver
Copyright © MP Lighting. All technical information in this document is subject to change.
LED25W1050i SPEC SHEET Features: • UL Class 2, limited output and current with isolation for safe operation. • Tight regulated output (1% line, 5% load) to maximize LED performance. 3-1/4” 83mm
3” 76mm
AC Input Voltage: 120V, 60Hz DC Output Voltage: 5.6...24V DC Output Current: 1.05A Constant Output Wattage: 25.2W Max Power Factor: 90% Min Typical Efficiency: 90% Short Circuit Protection: Yes Overload Protection: Yes Over-voltage Protection: Yes Dimming Function: Yes Operating Temperature: -40 ~ 60°C (-40 ~ 140°F) Maximum Case Temperature: 80°C (176°F) Total Harmonic Distortion: 20% Max Case Material: Non Conductive White Plastic Weight: 159g (0.35 lbs) Approval: UL Listed
2-5/8” 67mm
2-7/8” 73mm 1-3/8” 35mm
LED25W1050i Note: Consult factory for maximum wiring length. GND ~ VAC NEU
DIMMER
Max. load depends on wattage of fixture.
ORDER CODE
1050mA, dimmable
LED25W1050i
3x ...
350mA
Fluorescent Dimmers Only MARK 70-10V = 350mA LED Lighting Fixture Same number of fixtures in each leg
[ Project ]
[ Quantity ] [ Notes ]
t 604.708.1184 f 604.708.1185 www.mplighting.com 16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada