/LEDCatalogue2011 by MP Lighting

Contents Introduction 3 Product Overview

Wall, Floor & Ceiling Fixtures

Cabinet Fixtures

Canopy Mount & Rail Systems

102

Picture Lights

116

Pendants 122 Linear Systems

136

Desk & Table Fixtures

156

Hardware 160 Accessories 175 Drivers 176 Driver Enclosures

183

Magnetic Low Voltage Transformers

184

Recommended Driver Chart

186

Lamp Index & Isofootcandle Calculation

191

Explanation of Symbols

192

Mounting & Finishing Options

193

Online with MP Lighting

194

Research & Development

195

Terms & Warranty

196

Index 197

Introduction

www.mplighting.com

The realities of LED lighting are clearâ&#x20AC;&#x201D;with an average product life of 50,000 hours, LEDs are the most energy efficient and cost effective lighting option on the market. They contain no mercury or moving parts that could break, leak or shatter, limiting their impact on the environment. The right LED lighting can instantly enhance any space, while allowing users to conserve energy and save money. At MP Lighting, we are committed to providing you with the most current information and technology related to solid-state lighting. Our LEDs are produced using quality materials and are tested to ensure reliability and performance. We use high output lamps which are 10 to 20 times brighter than standard LEDs to ensure optimal light output and efficacy is achieved in each application. Our LED thermal management system ensures an efficient performance and utmost product life. Our commitment to quality products extends beyond their construction. When our LED products can no longer be used, all product parts are recyclable. The end result of our commitment is a clean, clear, and energy-efficient light guaranteed to complement any design. 2 3

Product Overview

Wall, Floor & Ceiling Fixtures

L01 (p.6-7)

L02 (p.8-9)

L03 (p.10-11)

L04 (p.12-13)

L05 (p.14-15)

L06 (p.16-17)

L07 (p.18-19)

L11 (p.20-21)

L12 (p.22-23)

L13 (p.24-25)

L14 (p.26-27)

L15 (p.28-29)

L16 (p.30-31)

L17 (p.32-33)

L18 (p.34-35)

L19 (p.36-37)

L21 (p.38-39)

L22 (p.40-41)

L31 (p.42-43)

L32 (p.44-45)

L33 (p.46-47)

L34 (p.48-49)

L35 (p.50-51)

L36 (p.52-53)

L37 (p.54-55)

L91 (p.56-57)

L92 (p.58-59)

L97 (p.60-61)

L98 (p.62-63)

L99 (p.64-65)

L130 (p.66-67)

L131 (p.68-69)

L134 (p.70-71)

L135 (p.72-73)

L141 (p.74-75)

L142 (p.76-77)

L151 (p.78-79)

L181 (p.80-81)

L55, 3 x 1W

L56, 3 x 1W

L57, 3 x 1W

L58, 2.5W

L59, 3.7W

L62, 3.2W

Cabinet Fixtures

L51, 1W / 2.5W

L52, 1W / 2.5W

L64, 2.5W

L65, 2.5W (p.100-101)

(p.82-83)

(p.98-99)

(p.84-85)

(p.86-87)

(p.88-89)

(p.90-91)

(p.92-93)

(p.94-95)

(p.96-97)

Canopy Mount & Rail Systems

L72 (p.102-103) L73 (p.104-105) L75 (p.106-107) L76 (p.108-109) L221 (p.110-111) L222 (p.112-113) L223 (p.114-115)

Picture Lights

L81 (p.116-117)

L85 (p.118-119)

Product Overview

www.mplighting.com

L202 (p.120-121)

Pendants

L96 (p.122-123)

L191 (p.124-125) G02L (p.126-127) G03L (p.128-129) P71L (p.130-131) P81L (p.132-133) P82L (p.134-135)

Linear Systems

L101, 1W

(p.136-137)

L102, 0.07W (p.138-139)

L112, 2.5W (p.148-149)

L103, 1W

(p.140-141)

L121, 0.07W (p.150-151)

L104, 1W

(p.142-143)

L106, 1W

(p.144-145)

L161, 1W

(p.152-153)

L111, 1W

(p.146-147)

L171, 1W

(p.154-155)

Desk & Table Fixtures

L200 (p.156-157) L203 (p.158-159) 4 5

Image shows L01-1W30SNC30-S2MA

L01

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L01 1W / 2.5W In-ground Application Outdoor / indoor directional ingrade light for uplighting walls, columns, or architectural features. Source 1W, 350mA or 2.5W, 700mA LED Driver Remote 120V primary, 350mA (1W) or 700mA (2.5W) driver (not included). LED Input Voltage 4V DC Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 1.8lbs net. (0.816kg) (base extra). Material Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens, suitable for walk-over and drive-over applications. RoHS compliant.

Ø4-1/8” Ø105mm

Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.

Ø2-1/4” Ø57mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

Polar Candela Distribution

4-7/8” 124mm

Base Height

Illuminance at a Distance

Center Beam FC

45°

approx. 700 cd max.

-90°

90°

L01 2.5W, 12° 3000K Std 162 lm

8.44

2.2’

2.3’

7.5’

12.15

1.9’

2.0’

6.0’

18.99

1.5’

1.6’

4.5’

33.76

1.1’

1.2’

3.0’

75.95

0.7’

0.8’

1.5’

303.82

0.4’

Polar Candela Distribution

90° Spread: 14.9°

Illuminance at a Distance

Splice box with 1/2 NPT I/O ports for connector and wiring.

Shown with standard flange (S) and (optional) mounting base.

Beam Width

9.0’

0° Spread: 14.1°

0°

paving stone

Paving stone flange 3-5/8” (92mm)

sand

180°

Center Beam FC

-45°

Lumen test results provided by LED chip manufacturer.

45°

approx. 1300 cd max.

-90°

90°

Code

Wattage

Color

Beam Width

9.0’

16.08

2.2’

2.3’

7.5’

23.16

1.9’

2.0’

6.0’

36.19

1.5’

1.6’

4.5’

64.34

1.1’

1.2’

3.0’

144.76

0.7’

0.8’

1.5’

579.04

0.4’

0° Spread: 14.1°

0°

L01

Standard flange 7/8” (22mm)

180°

-45°

Concrete pouring line

2-3/4” 70mm

See page 192 for explanation of symbols and IP ratings.

L01 1W, 12° 3000K Std 85 lm

1/8” 3mm

Ø1-5/8” Ø41mm

Beam

Shown with paving stone flange (P) with no base.

90° Spread: 14.9°

Lens

Option**

Angle Bracket

Flange Height

Base Height

Finish

S = standard flange 5/8” (17mm) P = paving stone flange, 3-3/8” (86mm)

0 = no base 2 = 2” (51mm) 6 = 6” (152mm) X = custom height

MA = matte clear anodized BA = black anodized BZ = bronze S3 = stainless steel 303 S6 = stainless steel 316

1 = 1W W27S = 2700K, 2 = 2.5W* std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

C = clear F = frosted

LM = louver, matte anodized LB = louver, black anodized

0 = no angle 30 = 30° angle X = custom (30° max.)

**Louver not available with angle bracket. NOTE: Standard CRI has a value of 75~82 while high CRI has 92. *Only available in W30S & W20H.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

6 7

Image shows L02-1W30SNC30-MA

L02

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L02 1W / 2.5W Walkway Application Indoor wall mounted directional or indicator light for stair, ramp, and aisle illumination. Source 1W, 350mA or 2.5W, 700mA LED Driver Remote 120V primary, 350mA (1W) or 700mA (2.5W) driver (not included). LED Input Voltage 4V DC Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.35lbs (0.158kg). Material Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens. RoHS compliant.

1” 25mm

3-1/2” 89mm

1/8” (3mm) Face of drywall

Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted.

Angle Ø2-1/4” Ø57mm

Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

Ø1-3/4” Ø44mm

Ø4-1/8” Ø105mm

1-3/4” 44mm

53 See page 192 for explanation of symbols and IP ratings.

L02 1W, 30° 3000K Std 85 lm

Polar Candela Distribution

Isofootcandle Plot

135°

180°

2 4

6 8 10 12 14 16 18

8 6 4 -90°

2 0 2 4 6

90°

-0°

approx. 260 cd max. 0°

L02 2.5W, 30° 3000K Std 162 lm

-90°

Mount height: 1 ft Total LLF: 1

45°

Polar Candela Distribution 180°

1 0.5 0.2 0.1 fc

Isofootcandle Plot

135°

8 4

Lumen test results provided by LED chip manufacturer.

-90°

90°

0.5 0.2 0.1 fc

-0°

approx. 480 cd max. 0°

Code L02

2.5

-90°

Mount height: 1 ft Total LLF: 1

45°

Wattage

Color

Beam

Lens

Option**

Angle Bracket

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

C = clear F = frosted

LM = louver, matte anodized LB = louver, black anodized

0 = no angle 30 = 30° angle 45 = 45° angle X = custom (45° max.)

MA = matte clear anodized BA = black anodized S3 = stainless steel 303 S6 = stainless steel 316

**Max. 30° angle bracket with louver opion.

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

8 9

Image shows L03-1W30SNC0-B6MA

L03

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L03 1W / 2.5W Submersible Application Submersed fresh water illumination to 12” (305mm) depth. Perfect for core drilling retrofits without back box and flange. Source 1W, 350mA or 2.5W, 700mA LED Driver Remote 120V primary, 350mA (1W) or 700mA (2.5W) driver (not included). LED Input Voltage 4V DC 4-3/8” 111mm

Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart. Weight 2.45lbs (1.11kg)

Buna rubber gasket sealing, tight to keep Ø1-5/8” in position even when upside down. Ø41mm Angle

Ø4-1/8” Ø105mm

Material Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens and 6’ (1829mm) Captire lead. RoHS compliant.

Mounting box with 1/2 NPT I/O ports for connector and wiring.

Mounting Comes with mounting box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete for submersed applications.

Shown4-3/8” with mounting box 111mm 3” 76mm

Approval Submersible. Approved to US and Canadian standards by CSA.

1/8” Mounting box 3mm with 1/2 NPT Concrete pouring line I/O ports for

Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

3-1/2” 89mm

connector and Ø2-1/4” wiring. Ø57mm

1-1/8” 29mm

See page 192 for explanation of symbols and IP ratings.

Shown with flange only

L03 1W, 120° 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

1 2 3 4 5 6 7 8 9 8 6 4

-90°

2 0 2 4 6

90°

-0°

approx. 28 cd max. 0°

L03 2.5W, 120° 3000K Std 162 lm

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

135°

1 2 3 4 5 6 7 8 9 8 6 4

Lumen test results provided by LED chip manufacturer.

-90°

2 0 2 4 6

90°

-0°

approx. 55 cd max. 0°

Code L03

-90°

45°

180°

2.5 0.5 0.2 0.1 fc

0.2 0.1 fc

-90°

Mount height: 1 ft Total LLF: 1

45°

Wattage

Color

Beam

Lens

Option**

Angle Bracket

Mounting

Lead Length

Finish

B = mounting box F = flange only

6 = 6’ (1829mm) X = custom

MA = matte clear anodized BA = black anodized S3 = stainless steel 303 S6 = stainless steel 316

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

C = clear F = frosted

LM = louver, matte anodized LB = louver, black anodized

0 = no angle 30 = 30° angle X = custom (30° max.)

**Louver not available with angle bracket.

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

10 11

Image shows L04-1W30SNC30-S2MA

L04

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L04 1W / 2.5W In-ground Application Outdoor / indoor directional ingrade light for uplighting walls, columns, or architectural features. Source 1W, 350mA or 2.5W, 700mA LED Driver Remote 120V primary, 350mA (1W) or 700mA (2.5W) driver (not included). LED Input Voltage 4V DC Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 1.83lbs net. (0.83kg) (base extra) Material Solid anodized aluminum or stainless steel with 1/4” (6mm) thick tempered glass lens, suitable for walk-over and drive-over applications. RoHS compliant.

Ø4-1/8” Ø105mm

Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete/paving stone with or without mounting base.

Sq.2-1/4” Sq.57mm

2-3/4” 70mm

Polar Candela Distribution

Center Beam FC

-45°

45°

approx. 700 cd max.

-90°

90°

8.44

2.2’

2.3’

7.5’

12.15

1.9’

2.0’

6.0’

18.99

1.5’

1.6’

4.5’

33.76

1.1’

1.2’

3.0’

75.95

0.7’

0.8’

1.5’

303.82

0.4’

0° Spread: 14.1°

Polar Candela Distribution

paving stone

90° Spread: 14.9°

Illuminance at a Distance

Paving stone flange 3-5/8” (92mm)

sand

180°

Center Beam FC

-45°

Lumen test results provided by LED chip manufacturer.

45°

approx. 1300 cd max.

-90°

90°

Code

Wattage

Beam Width

9.0’

16.08

2.2’

2.3’

7.5’

23.16

1.9’

2.0’

6.0’

36.19

1.5’

1.6’

4.5’

64.34

1.1’

1.2’

3.0’

144.76

0.7’

0.8’

1.5’

579.04

0.4’

0° Spread: 14.1°

0°

L04

Splice box with 1/2 NPT I/O ports for connector and wiring.

Shown with standard flange (S) and (optional) mounting base.

Beam Width

9.0’

0°

L04 2.5W, 12° 3000K Std 162 lm

Base Height

Illuminance at a Distance

180°

Concrete pouring line

Standard flange 7/8” (22mm)

4-7/8” 124mm

See page 192 for explanation of symbols and IP ratings.

L04 1W, 12° 3000K Std 85 lm

1/8” 3mm

Ø1-5/8” Ø41mm

Color

Beam

Shown with paving stone flange (P) with no base.

90° Spread: 14.9°

Lens

Option**

Angle Bracket

Flange Height

Base Height

Finish

S = standard flange 5/8” (17mm) P = paving stone flange, 3-3/8” (86mm)

0 = no base 2 = 2” (51mm) 6 = 6” (152mm) X = custom height

MA = matte clear anodized BA = black anodized S6 = stainless steel 316

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) C = clear N = narrow flood F = frosted (30°) W = wide flood (120°)

LM = louver, matte anodized LB = louver, black anodized

0 = no angle 30 = 30° angle X = custom (30° max.)

**Louver not available with angle bracket.

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

12 13

Image shows L05-3W30SFC0-2MA

L05

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L05 3W / 7.5W In-ground Application Outdoor / indoor directional ingrade light for uplighting walls, columns, or architectural features. Source 3 x 1W, 350mA or 3 x 2.5W, 700mA LEDs Driver Remote 120V primary, 350mA (3W) or 700mA (7.5W) driver, or 12V constant voltage driver (not included). LED Input Voltage 12V DC Power Consumption 4W / 9W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø4-5/8” Ø117mm

Weight 2.56lbs (1.16kg) (base extra). Material Solid anodized aluminum or stainless steel with 3/8” (10mm) thick tempered glass lens, suitable for walk-over and drive-over applications. RoHS compliant.

Ø2-11/16” Ø69mm 3-1/8” 79mm

Mounting Comes with splice box, aluminum flange and level gauge. Can be buried in earth/gravel or cast into concrete with or without mounting base. Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

Ø3-5/8” Ø92mm

Concrete pouring line

2-1/2” 4-1/2” 65mm 114mm

1/4” 6mm

4-7/8” 124mm

Base Height

See page 192 for explanation of symbols and IP ratings.

L05 3 x 1W 30° 3000K Std 255 lm

Polar Candela Distribution

Illuminance at a Distance

Center Beam FC

-45°

45°

approx. 650 cd max.

-90°

90°

L05 3 x 2.5W 30° 3000K Std 486 lm

Polar Candela Distribution

Beam Width

9.0’

8.19

4.8’

4.9’

7.5’

11.79

4.0’

6.0’

18.42

3.2’

4.5’

32.75

2.4’

3.0’

73.68

1.6’

1.5’

294.71

0.8’

0° Spread: 29.9°

0°

90° Spread: 30.2°

Illuminance at a Distance

180°

Center Beam FC

-45°

Lumen test results provided by LED chip manufacturer.

45°

approx. 1300 cd max.

-90°

90°

Code

Wattage

Beam Width

9.0’

15.60

4.8’

4.9’

7.5’

22.47

4.0’

6.0’

35.10

3.2’

4.5’

62.41

2.4’

3.0’

140.42

1.6’

1.5’

561.68

0.8’

0° Spread: 29.9°

0°

L05

Shown with (optional) mounting base.

180°

Color

Beam

90° Spread: 30.2°

Lens

Angle Bracket

Base Height

Finish

0 = no height 2 = 2” (51mm) high 6 = 6” (152mm) high X = custom height

MA = matte clear anodized BA = black anodized S6 = stainless steel 316

3 = 3 x 1W 7 = 3 x 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

N = narrow flood (30°) F = flood (60°)

C = clear F = frosted

0 = no angle 30 = 30° angle

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

14 15

Image shows L06-W27SB4-S6

L06

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L06 0.1W In-ground Application Outdoor / indoor indicator light for driveway and sidewalk. Source 0.1W, 20mA LED Driver Remote 120V primary, 6V constant voltage, 20mA driver (not included). LED Input Voltage 6V DC Power Consumption 0.1W Weight 1.21lbs (0.549kg). Material Stainless steel 316. RoHS compliant. Mounting Can be buried in earth/gravel or cast into concrete with or without mounting base. Ø7/8” Ø22mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA.

3/8 IPS Nipple Ø7/8” Ø22mm

Nipple

3/8 IPS Nipple

See page 192 for explanation of symbols and IP ratings.

Nipple 2-3/8” 60mm

Shown with no base (to 1/2 NPT connector)

2-3/8” 60mm

4-7/8” 124mm

Shown with base 4-7/8” 124mm Ø3/4” Ø19mm

L06 2700K Std 3.2 lm

Polar Candela Distribution

Illuminance at a Distance

Ø3/4” Concrete Ø19mm pouring line

180°

Center Beam FC

-45°

Lumen test results provided by LED chip manufacturer.

45°

approx. 3.3 cd max.

-90°

90°

Beam Width

1.0’

3.31

0.4’

0.8’

4.77

0.3’

0.7’

7.45

0.3’

0.5’

13.25

0.2’

0.3’

29.80

0.1’

0.2’

119.21

0.1’

0° Spread: 23.4°

0°

Concrete pouring line

90° Spread: 23.2°

Ø4-1/2” Ø114mm Ø4-1/2” Ø114mm

Code L06

Color -

Base

Nipple

W27S W27S = 2700K, std CRI

Finish -

B = with base N = no base

2 = 2” (51mm) long 4 = 4” (102mm) long 8 = 8” (203mm) long X = custom length

S6 S6 = stainless steel 316

NOTE: Standard CRI has a value of 75~82.

16 17

Image shows L07-W27S-S6

L07

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L07 0.1W In-floor Application Outdoor / indoor indicator light for deck flooring. Source 0.1W, 20mA LED Driver Remote 120V primary, 6V constant voltage, 20mA (not included). LED Input Voltage 6V DC Power Consumption 0.1W

Ø3/8” Ø8mm

Weight 0.05lbs (0.024kg).

Ø3/4” Ø19mm

Material Stainless steel 316. RoHS compliant. Mounting Mounts directly into deck flooring.

1/8” 3mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA.

Ø1/2” Ø13mm

1-1/2” 38mm

67 See page 192 for explanation of symbols and IP ratings.

L07 2700K Std 3.2 lm

Polar Candela Distribution

Illuminance at a Distance

180°

Center Beam FC

-45°

Lumen test results provided by LED chip manufacturer.

45°

approx. 3.3 cd max.

-90°

90°

Code L07

Color -

W27S W27S = 2700K, std CRI

3.31

0.4’

0.8’

4.77

0.3’

0.7’

7.45

0.3’

0.5’

13.25

0.2’

0.3’

29.80

0.1’

0.2’

119.21

0.1’

0° Spread: 23.4°

0°

Beam Width

1.0’

90° Spread: 23.2°

Finish -

S6 S6 = stainless steel 316

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

18 19

Image shows L11-1W30SWV-MC

L11

www.mplighting.com

Application Indoor stair, ramp, aisle, and walkway illumination.

1-1/2” 38mm

Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver.

3-1/8” 79mm

7/8” 22mm

4-3/4” 121mm

3-1/4” 83mm

Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

1-3/8” 35mm

Ø1-1/2” Ø38mm

Weight 0.59lbs (0.266kg). 3-1/8” Material Plated1-1/2” brass, anodized aluminum. RoHS compliant. 38mm

7/8” horizontally 22mmpositioned

79mm

1-1/2” 38mm gang box

Mounting Vertically or face plate mounts to single included). Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF.

(not

7/8” 22mm

4-3/4” 121mm

3-1/4” 83mm

3-1/4” Approval Dry locations. Approved to US and Canadian standards by CSA. 83mm

4-3/4” 121mm

5/8” 16mm

Note Can be used as emergency backup lighting in conjunction with Bodine emergency 1-3/8” Ø1-1/2” LED driver (sold 35mmseparately). Consult factory. 1-3/8” Ø38mm

Shown as 120° beam Vertical plate

Shown as 120° beam 3-1/8” Horizontal plate 79mm

Wall, Floor & Ceiling Fixtures

Shown as 12° or 30° beam Vertical plate

L11 1W / 2.5W Walkway

5/8” 16mm Ø1-1/2” Ø38mm

35mm

50 See page 192 for explanation of symbols and IP ratings.

L11 1W, 12° 3000K Std 85 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 750 cd max.

45°

-0°

-90°

Polar Candela Distribution

-90°

90°

approx. 1500 cd max.

-45°

45°

0.5

0.1 fc

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

L11

20 5

Code

Isofootcandle Plot

180°

Lumen test results provided by LED chip manufacturer.

Mount height: 1 ft Total LLF: 1

0°

L11 2.5W, 12° 3000K Std 162 lm

20 1.0 0.2 0.1 fc

-45°

Wattage

Color

Beam

Plate

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

V = vertical H = horizontal

MC = matte chrome BK = powder coated black BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

20 21

5/8” 16mm

Image shows L12-1W30SSW30SS-MC

L12

www.mplighting.com

1-3/8” 35mm

Application Indoor stair, ramp, aisle, and walkway illumination.

1-1/2” 38mm

3-1/8” 79mm

Source 2 x 1W, 350mA or 2 x 2.5W, 700mA LEDs. 4-3/4” 121mm

3-1/4” 83mm

Driver Integral 120V primary, 3W 350mA (2W) or 9W 700mA (5W) non-dimmable driver. Power Consumption 3W / 6W

7/8” 2-1/8” 22mm 54mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø1-1/2” Ø38mm

Weight 0.914lbs (0.415kg). Material Plated brass, anodized aluminum. RoHS compliant. Mounting Vertically positioned face

1-3/8” 1-3/8” 35mm 35mm plate mounts

to a single

Shown as 120° beam 1-1/2” 1-1/2” 38mm 38mm gang box (not

Wall, Floor & Ceiling Fixtures

Shown as 12° or 30° beam

L12 2 x 1W / 2.5W Up and Down Walkway

3-1/8” 3-1/8” 79mm 79mm included).

Approval Dry locations. Approved to US and Canadian standards by CSA. 4-3/4” 4-3/4” 121mm 121mm

3-1/4” 3-1/4”

83mm in conjunction with Bodine emergency Note Can be used as emergency backup83mm lighting LED driver (sold separately). Consult factory. 7/8” 7/8” 2-1/8” 2-1/8” 22mm 22mm 54mm 54mm

1-5/8” 1-5/8” 41mm 41mm

Ø1-1/2” Ø1-1/2” Ø38mm Ø38mm

50 See page 192 for explanation of symbols and IP ratings.

L12 2 x 1W, 30° 3000K Std 170 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 300 cd max.

45°

-0°

-90°

Polar Candela Distribution

-90°

90°

approx. 550 cd max.

-45°

45°

2 3

0.1 fc

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

L12

20 2.5 0.5

Code

Isofootcandle Plot

180°

Lumen test results provided by LED chip manufacturer.

Mount height: 1 ft Total LLF: 1

0°

L12 2 x 2.5W, 30° 3000K Std 324 lm

20 1.0 0.2 0.1 fc

-45°

Wattage

Color UP

Beam UP

Color Down

Beam Down

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

MC = matte chrome BK = powder coated black BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

22 23

1-5/ 41m

Image shows L13-1W30SWV-MC

L13

www.mplighting.com

Application Indoor stair, ramp, aisle, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver. Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.78lbs (0.353kg). Material Plated brass, anodized aluminum. RoHS compliant.

Shown as 12° or 30° beam Vertical plate

Mounting Vertically or horizontally positioned face plate mounts to single gang box (not included). Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF.

1-1/4” 32mm

Wall, Floor & Ceiling Fixtures

L13 1W / 2.5W Walkway

3-1/8” 79mm

Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

1-3/4” 44mm

3-1/4” 83mm

1-3/8” 35mm

1-1/2” 38mm

4-3/4” 121mm

Ø1-1/2” Ø38mm

See page 192 for explanation of symbols and IP ratings.

L13 1W, 12° 3000K Std 85 lm

1-1/4”

3-1/8” 79mm

32mm Polar Candela Distribution

32mm

180°

1-3/4” 44mm

-90° 3-1/4” 83mm

4-3/4” 0 121mm

90°

45°

750 cd max.

-0°

Ø1-1/2” 3 Ø38mm

-90°

1-3/8” 35mm

Ø1-1/2” Ø38mm

Isofootcandle Plot 2

-90°

90°

approx. 1500 cd max.

-45°

45°

0.5

0.1 fc

-0°

-90°

20 5

Mount height: 1 ft Total LLF: 1

0°

L13

1-1/2” 38mm

Mount height: 1 ft Total LLF: 1

180°

Code

4-3/4” 121mm

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

1-1/2” 38mm 1-3/4” 44mm

0°

L13 2.5W, 12° 3000K Std 162 lm

0.2 0.1 fc

1-3/8” 35mm approx.

3-1/4” 20 83mm1.0

-45°

Shown as 120° beam Vertical plate

Shown as 120° beam 3-1/8” Horizontal plate 79mm

1-1/4” Isofootcandle Plot

Wattage

Color

Beam

Plate

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

V = vertical H = horizontal

MC = matte chrome BK = powder coated black BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

24 25

Image shows L14-1W30SWV-MC

L14

www.mplighting.com

Application Indoor stair, ramp, aisle, and walkway illumination.

1-1/2” 38mm

Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver.

3-1/8” 79mm

7/8” 22mm

3-1/4” 83mm

Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

4-3/4” 121mm

1-1/2” 38mm

1-3/8” 35mm

Weight 0.65lbs (0.296kg). Material Plated1-1/2” brass, anodized aluminum. RoHS compliant. 3-1/8” 38mm

79mm

1-1/2” 38mm gang box

Mounting Vertically or horizontally positioned face plate mounts to single included). Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF. 7/8”

3-1/4”

Shown as 120° beam Horizontal 3-1/8” plate 79mm

(not

4-3/4”

121mm 83mm 3-1/4” Approval Dry locations. Approved 22mm to US and Canadian standards by CSA.

7/8” 22mm 5/8” 16mm

83mm

Note Can be used as emergency backup lighting in conjunction with Bodine emergency 1-1/2” 1-3/8” LED driver (sold separately). Consult factory.38mm 35mm 1-3/8”

Shown as 120° beam Vertical plate

Wall, Floor & Ceiling Fixtures

Shown as 12° or 30° beam Vertical plate

L14 1W / 2.5W Walkway

4-3/4” 121mm 5/8” 16mm 1-1/2” 38mm

35mm

50 See page 192 for explanation of symbols and IP ratings.

L14 1W, 120° 3000K Std 85 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

90°

45°

-0°

-90°

0.1 fc

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

90°

-45°

approx. 70 cd max.

45°

L14

2.5

0.5

-0°

-90°

0.1 fc Mount height: 1 ft Total LLF: 1

0°

Code

0 1

Lumen test results provided by LED chip manufacturer.

2.5 0.5

0°

L14 2.5W, 120° 3000K Std 162 lm

approx. 35 cd max.

0 1

-45°

Wattage

Color

Beam

Plate

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

V = vertical H = horizontal

MC = matte chrome BK = powder coated black BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

26 27

5/8” 16mm

Image shows L15-1W30SSW30SS-MC

L15

www.mplighting.com

3-1/8” 79mm

1-1/2” 38mm

Application Indoor stair, ramp, aisle, and walkway illumination. Source 2 x 1W, 350mA or 2 x 2.5W, 700mA LEDs.

4-3/4” 121mm

3-1/4” 83mm

Driver Integral 120V primary, 3W 350mA (2W) or 9W 700mA (5W) non-dimmable driver. Power Consumption 3W / 6W

1-3/8” 35mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

7/8” 2-1/8” 22mm 54mm

1-1/2” 38mm

Weight 1.03lbs (0.467kg). Material Plated brass, anodized aluminum. RoHS compliant.

3-1/8”

1-1/2”

Wall, Floor & Ceiling Fixtures

Shown as 12° or 30° beam

L15 2 x 1W / 2.5W Up and Down Walkway

Shown as 120° beam

Mounting Vertically positioned face plate mounts to38mm a single gang box (not included).79mm Approval Dry locations. Approved to US and Canadian standards by CSA.

4-3/4” 121mm

3-1/4”

83mm Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory. 7/8” 2-1/8” 22mm 54mm

1-3/8” 35mm

1-5/8” 41mm

1-1/2” 38mm

50 See page 192 for explanation of symbols and IP ratings.

L15 2 x 1W, 12° 3000K Std 170 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 750 cd max.

45°

-0°

-90°

Polar Candela Distribution

-90°

90°

approx. 1500 cd max.

-45°

45°

-90°

Mount height: 1 ft Total LLF: 1

0°

L15

0.1 fc

-0°

20 2.5 0.5

Code

Isofootcandle Plot

180°

Lumen test results provided by LED chip manufacturer.

Mount height: 1 ft Total LLF: 1

0°

L15 2 x 2.5W, 12° 3000K Std 324 lm

20 1.0 0.2 0.1 fc

-45°

Wattage

Color UP

Beam UP

Color Down

Beam Down

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

MC = matte chrome BK = powder coated black BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

28 29

1-5/8” 41mm

Image shows L16-1W30SWV-S6

L16

www.mplighting.com

Shown as Vertical plate

Application Outdoor / indoor wall, stair, and walkway illumination. 1/8” 3mm

Source 1W, 350mA or 2.5W, 700mA LED

3-3/8” 86mm

1-1/8” 29mm

Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver.

5” 127mm

3-1/4” 83mm

Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

2-1/2” 64mm

Weight 1.83lbs (0.832kg). Material 316 stainless steel. RoHS compliant.

1/8” 3mm

Ø2-1/2” Ø64mm

3-3/8” 86mm

1-1/8” 29mm

Mounting Vertically or horizontally positioned face plate mounts to a single gang box (not included). Optimal mounting distance is 18”3-1/4” - 24” (457mm - 610mm) AFF.

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L16 1W / 2.5W Walkway

5” 127mm

83mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency 2-1/2” Ø2-1/2” 64mm Ø64mm LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L16 1W, 30° 3000K Std 85 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 275 cd max.

45°

-90°

0.1 fc

Isofootcandle Plot 2

180° -90°

90°

approx. 530 cd max.

-45°

45°

0.1 fc

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

L16

20 2.5 0.5

Code

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-0°

0°

L16 2.5W, 30° 3000K Std 162 lm

20 10 0.5

-45°

Wattage

Color

Beam

Plate

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

V = vertical H = horizontal

S6 S6 = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

30 31

Image shows L17-1W30SNW30SW-S6

L17

www.mplighting.com

Application Outdoor / indoor wall, stair, and walkway illumination. 1/8” 3mm

Source 2 x 1W, 350mA or 2 x 2.5W, 700mA LEDs.

3-3/8” 86mm

2-1/2” 64mm

Driver Integral 120V primary, 3W 350mA (2W) or 9W 700mA (5W) non-dimmable driver. 5” 127mm

3-1/4” 83mm

Power Consumption 3W / 6W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

2-1/2” 64mm

Weight 3.06lbs (1.39kg).

1-1/8” 29mm

Ø2-1/2” Ø64mm

Material 316 stainless steel. RoHS compliant.

Wall, Floor & Ceiling Fixtures

L17 2 x 1W / 2.5W Up and Down Walkway

Mounting Vertically positioned face plate mounts to a single gang box (not included). Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L17 2 x 1W, 12° 3000K Std 170 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 700 cd max.

45°

-90°

0.1 fc

Isofootcandle Plot 2

180° -90°

90°

approx. 1300 cd max.

-45°

45°

0.1 fc

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

L17

20 5 0.5

Code

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-0°

0°

L17 2 x 2.5W, 12° 3000K Std 324 lm

20 10 0.5

-45°

Wattage

Color UP

Beam UP

Color Down

Beam Down

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

S6 S6 = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

32 33

Image shows L18-1W30SNV-S6

L18

www.mplighting.com

Shown as Vertical plate

Application Outdoor / indoor wall, stair, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver.

1-1/8” 29mm

Power Consumption 1.5W / 3W

Material 316 stainless steel. RoHS compliant.

1-3/4” 44mm

3-3/8” 86mm

2-1/2” 64mm

5” 127mm

3-1/4” 83mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 1.92lbs (0.873kg).

3-3/8” 86mm

2-1/2” 64mm

2-1/8” 54mm

Shown as Horizontal plate

1-1/8” 29mm

Mounting Vertically or horizontally positioned face plate mounts to a single gang box (not included). Optimal mounting distance is 18”3-1/4” - 24” (457mm - 610mm) AFF.

Wall, Floor & Ceiling Fixtures

L18 1W / 2.5W Walkway

5” 127mm

83mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes Can be used as emergency backup lighting in conjunction 1-3/4” with Bodine emergency 2-1/8” 44mm 54mm LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L18 1W, 30° 3000K Std 85 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

approx. 275 cd max.

45°

-90°

0.1 fc

Isofootcandle Plot 2

180° -90°

90°

approx. 530 cd max.

-45°

45°

0.1 fc

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

L18

20 2.5 0.5

Code

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-0°

0°

L18 2.5W, 30° 3000K Std 162 lm

20 10 0.5

-45°

Wattage

Color

Beam

Plate

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

V = vertical H = horizontal

S6 S6 = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

34 35

Image shows L19-1W30SNW30SN-S6

L19

www.mplighting.com

Application Outdoor / indoor wall, stair, and walkway illumination.

3-3/8” 86mm

2-1/2” 64mm

Source 2 x 1W, 350mA or 2 x 2.5W, 700mA LEDs. Driver Integral 120V primary, 3W 350mA (2W) or 9W 700mA (5W) non-dimmable driver.

3-1/4” 83mm

Power Consumption 3W / 6W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

1/8” 3mm

Weight 3.24lbs (1.47kg).

5” 127mm

2-1/2” 64mm

1-1/8” 29mm

2-1/8” 54mm

Material 316 stainless steel. RoHS compliant.

Wall, Floor & Ceiling Fixtures

L19 2 x 1W / 2.5W Up and Down Walkway

66 See page 192 for explanation of symbols and IP ratings.

L19 2 x 1W, 120° 3000K Std 170 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

90°

approx. 28 cd max.

45°

-90°

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

90°

approx. 55 cd max.

45°

-90°

L19

Mount height: 1 ft Total LLF: 1

0°

Code

0.1 fc

-0°

2 -45°

20 5

Lumen test results provided by LED chip manufacturer.

Mount height: 1 ft Total LLF: 1

0°

L19 2 x 2.5W, 120° 3000K Std 324 lm

0.1 fc

-0°

20 2.5 1

-45°

Wattage

Color UP

Beam UP

Color Down

Beam Down

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

S6 S = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

36 37

Image shows L21-1W30SF-S3

L21

www.mplighting.com

3/4” 19mm

Application Indoor stair, ramp, aisle, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED

3-1/2” 89mm

Driver Integral 120V primary, 3W 350mA (1W) or 3W 700mA (2.5W) non-dimmable driver.

Ø2-1/2” Ø64mm

Power Consumption 1.5W / 3W 1-3/8” 35mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.99lbs (0.45kg). Material 303 stainless steel and polycarbonate lens. RoHS compliant.

1/4” 6mm

Ø4-5/8” Ø117mm

Wall, Floor & Ceiling Fixtures

L21 1W / 2.5W Walkway

Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2” / 38mm minimum depth). Optimal mounting distance is 18” - 24” (457mm - 610mm) AFF. Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

50 See page 192 for explanation of symbols and IP ratings.

L21 1W 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot 0 1 2 3 4

135° 4 3 2

-90°

90°

approx. 4 cd max. 0°

L21 2.5W 3000K Std 162 lm

-90°

180°

0.1 fc

Mount height: 1 ft Total LLF: 1

Isofootcandle Plot 0 1 2 3 4 4 3 2

-90°

90°

approx. 7.5 cd max.

Code

-0° -90°

Color

0.2

1 0 1 2 3

2.5

0.1 fc

0.5

Lens F

1 = 1W 2 = 2.5W*

5 6

Mount height: 1 ft Total LLF: 1

45°

Wattage

0.5

135°

0°

0.2

1 0 1 2 3

45°

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

L21

-0°

5 6

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

F = frosted

Finish -

S3 S3 = stainless steel 303

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

38 39

Image shows L22-1W30SF-S3

L22

www.mplighting.com

3/4” 19mm

Application Outdoor / indoor wall, stair, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED

3-1/2” 89mm

Driver Integral 120V primary, 3W 350mA (1W) or 3W 700mA (2.5W) non-dimmable driver.

Ø2-1/2” Ø64mm

Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

1-3/4” 44mm

Weight 0.99lbs (0.45kg). Material 303 stainless steel and polycarbonate lens. RoHS compliant.

1/4” 6mm

Ø4-5/8” Ø117mm

Wall, Floor & Ceiling Fixtures

L22 1W / 2.5W Walkway

Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2” / 38mm minimum depth). Use outdoor rated box for outdoor applications. Optimal mounting distance is 18”-24” (457mm-610mm) AFF. Approval Wet locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L22 1W 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot 0 1 2 3 4

135° 4 3 2

-90°

90°

approx. 4 cd max. 0°

L22 2.5W 3000K Std 162 lm

-90°

180°

0.1 fc

Mount height: 1 ft Total LLF: 1

Isofootcandle Plot 0 1 2 3 4 4 3 2

-90°

90°

approx. 7.5 cd max.

Code

-0° -90°

Color

0.2

1 0 1 2 3

2.5

0.1 fc

0.5

Lens F

1 = 1W 2 = 2.5W*

5 6

Mount height: 1 ft Total LLF: 1

45°

Wattage

0.5

135°

0°

0.2

1 0 1 2 3

45°

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

L22

-0°

5 6

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

F = frosted

Finish -

S3 S3 = stainless steel 303

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

40 41

Image shows L31-1W30S-MC

L31

www.mplighting.com

Shown as Vertical plate

Application Indoor stair, ramp, aisle, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 3W 700mA (2.5W) non-dimmable driver. Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.57lbs (0.258kg). Material Plated brass and polycarbonate cylinder lens. RoHS compliant.

3-1/4” 83mm 3-1/4” 83mm

7/8” 22mm 7/8” 22mm

4-5/8” 117mm 4-5/8” 117mm

3-1/4” 83mm 3-1/4” 83mm 3-1/8” 79mm 3-1/8” 79mm

Ø1” Ø25mm Ø1” Ø25mm

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L31 1W / 2.5W Walkway

Mounting Vertically or horizontally positioned face plate mounts to a single gang box (not included). Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

50 See page 192 for explanation of symbols and IP ratings.

L31 1W, 30° 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4 4 3 2

-90°

approx. 25 cd max. 0°

-0°

0.2 2.5 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

180°

-90°

45°

L31 2.5W, 30° 3000K Std 162 lm

Isofootcandle Plot

135°

0 1 2 3 4

5 6

4 3 2

approx. 48 cd max.

Code

1 0 1 2 3

90°

0°

L31

1 0 1 2 3

90°

5 6

-0°

0.2 0.1 fc

-90°

Mount height: 1 ft Total LLF: 1

45°

Wattage

5 1

Color

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

MC = matte chrome S3 = stainless steel 303

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

42 43

Image shows L32-1W30S-MC

L32

www.mplighting.com

Shown as Vertical plate

3-1/4” 83mm 3-1/4” 83mm

7/8” 22mm 7/8” 22mm 3-1/4” 83mm 3-1/4”

4-5/8” 117mm 4-5/8” 117mm

83mm 3-1/8” 79mm 3-1/8”

1” Sq. 25mm 1” Sq. Sq.

79mm

25mm Sq.

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L32 1W / 2.5W Walkway

50 See page 192 for explanation of symbols and IP ratings.

L32 1W, 30° 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4 4 3 2

-90°

approx. 27 cd max. 0°

-0°

0.2 2.5 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

180°

-90°

45°

L32 2.5W, 30° 3000K Std 162 lm

Isofootcandle Plot

135°

0 1 2 3 4

5 6

4 3 2

approx. 52 cd max.

Code

1 0 1 2 3

90°

0°

L32

1 0 1 2 3

90°

5 6

-0°

0.2 0.1 fc

-90°

Mount height: 1 ft Total LLF: 1

45°

Wattage

5 1

Color

Finish -

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

MC = matte chrome S3 = stainless steel 303

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

44 45

Image shows L33-1W30S-S6

L33

www.mplighting.com

Shown as Vertical plate

Application Outdoor / indoor wall, stair, and walkway illumination. Source 1W, 350mA or 2.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (1W) or 9W 700mA (2.5W) non-dimmable driver. Power Consumption 1.5W / 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 1.34lbs (0.609kg). Material 316 stainless steel and polycarbonate cylinder lens. RoHS compliant.

3-1/4” 83mm 3-1/4” 83mm

7/8” 22mm 7/8” 22mm 3-1/4” 83mm 3-1/4” 83mm 1-3/4” 44mm 1-3/4” 44mm

4-5/8” 117mm 4-5/8” 117mm Ø1” Ø25mm Ø1” Ø25mm

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L33 1W / 2.5W Walkway

Mounting Vertically or horizontally positioned face plate mounts to a single gang box (not included). Approval Wet locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L33 1W, 30° 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4 4 3 2

-90°

approx. 25 cd max. 0°

-0°

0.2 2.5 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

180°

-90°

45°

L33 2.5W, 30° 3000K Std 162 lm

Isofootcandle Plot

135°

0 1 2 3 4

5 6

4 3 2

approx. 48 cd max.

Code

1 0 1 2 3

90°

0°

L33

1 0 1 2 3

90°

5 6

-0°

Mount height: 1 ft Total LLF: 1

Color

Finish -

1 = 1W 2 = 2.5W*

0.2 0.1 fc

-90°

45°

Wattage

5 1

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S6 S6 = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

46 47

Image shows L34-1W30S-S6

L34

www.mplighting.com

Shown as Vertical plate

3-1/4” 83mm 3-1/4” 83mm 1-3/4” 44mm 1-3/4” 44mm

Weight 1.34lbs (0.609kg). Material 316 stainless steel and polycarbonate cube lens. RoHS compliant.

3-1/4” 83mm 3-1/4” 83mm

7/8” 22mm 7/8” 22mm

4-5/8” 117mm 4-5/8” 117mm 1” Sq. 25mm 1” Sq. Sq. 25mm Sq.

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L34 1W / 2.5W Walkway

66 See page 192 for explanation of symbols and IP ratings.

L34 1W, 30° 3000K Std 85 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4 4 3 2

-90°

approx. 27 cd max. 0°

-0°

0.2 2.5 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

180°

-90°

45°

L34 2.5W, 30° 3000K Std 162 lm

Isofootcandle Plot

135°

0 1 2 3 4

5 6

4 3 2

approx. 52 cd max.

Code

1 0 1 2 3

90°

0°

L34

1 0 1 2 3

90°

5 6

-0°

Mount height: 1 ft Total LLF: 1

Color

Finish -

1 = 1W 2 = 2.5W*

0.2 0.1 fc

-90°

45°

Wattage

5 1

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S6 S6 = stainless steel 316

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

48 49

Image shows L35-3W30S-MA

L35

www.mplighting.com

Shown as Vertical plate

Application Outdoor / indoor wall, stair, and walkway illumination. Source 3.5W, 350mA or 6.5W, 700mA LED Driver Integral 120V primary, 3W 350mA (3.5W) or 9W 700mA (6.5W) non-dimmable driver. Power Consumption 4W / 8W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

3-1/4” 83mm 3-1/4” 83mm

3/8” 10mm 3/8” 10mm 3-1/4” 83mm 3-1/4” 83mm

4-3/4” 121mm 4-3/4” 121mm

2-3/8” 60mm 2-3/8” 60mm

1-3/4” 45mm 1-3/4” 45mm

Weight 1.18lbs (0.537kg). Material Anodized aluminum and polycarbonate lens. RoHS compliant.

Shown as Horizontal plate

Wall, Floor & Ceiling Fixtures

L35 3.5W / 6.5W Walkway

Mounting Face plate mounts vertically or horizontally to a single gang box (not included). Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L35 3.5W 3000K Std 250 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

4 2 -90°

90°

0°

-0°

-90°

0.1 fc

Mount height: 1 ft Total LLF: 1

45°

L35 6.5W 3000K Std 475 lm

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

180°

10 2.5 0.5

0 2

approx. 70 cd max.

Isofootcandle Plot

135°

4 2 90°

0°

Code L35

Wattage -

-0°

-90°

1 0.5

0.1 fc

Mount height: 1 ft Total LLF: 1

45°

Color W30S

3 = 3.5W 6 = 6.5W

20 5

approx. 140 cd max.

W30S = 3000K, std CRI

Finish MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82.

50 51

Image shows L36-3W30S-MA

L36

www.mplighting.com

1-7/8” 48mm

Application Outdoor / indoor wall, stair, and walkway illumination. Source 3.5W, 350mA or 6.5W, 700mA LED

1/4” 6mm

Driver Integral 120V primary, 3W 350mA (3.5W) or 9W 700mA (6.5W) non-dimmable driver. Power Consumption 4W / 8W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

5/8” 16mm

3/8” 10mm 45°

3-1/4” 83mm 3-1/4” 83mm

2-3/8” 60mm 4-3/4” 121mm

Weight 1.4lbs (0.636kg). Material Anodized aluminum and polycarbonate lens. RoHS compliant.

Wall, Floor & Ceiling Fixtures

L36 3.5W / 6.5W Walkway

Mounting Face plate mounts horizontally to single gang box (not included). Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L36 3.5W 3000K Std 250 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4

approx. 33 cd max. -90°

1 0 1 2 3

90°

-0°

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

L36

0 1 2 3 4

1 0 1 2 3

90°

20 10 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

45°

Color W30S

3 = 3.5W 6 = 6.5W

-90°

Wattage

5 6

4 3 2

-0°

Code

10 5 0.5 0.1 fc

Isofootcandle Plot

135°

approx. 65 cd max.

0°

Mount height: 1 ft Total LLF: 1

45°

L36 6.5W 3000K Std 475 lm

180°

-90° 0°

5 6

4 3 2

W30S = 3000K, std CRI

Finish MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82.

52 53

Image shows L37-3W30S-MA

L37

www.mplighting.com

2” 51mm

2-3/4” 70mm

7/8” 22mm

1-1/8” 29mm

Ø4-1/2” Ø114mm

1/4” 6mm

45°

2-3/8” 60mm

Wall, Floor & Ceiling Fixtures

L37 3.5W / 6.5W Walkway

Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2” / 38mm minimum depth). Use outdoor rated box for outdoor applications. Optimal mounting distance is 18”-24” (457mm-610mm) AFF. Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

66 See page 192 for explanation of symbols and IP ratings.

L37 3.5W 3000K Std 250 lm

Polar Candela Distribution 180°

Isofootcandle Plot

135°

0 1 2 3 4

approx. 33 cd max. -90°

1 0 1 2 3

90°

-0°

Polar Candela Distribution

Lumen test results provided by LED chip manufacturer.

-90°

L37

135°

0 1 2 3 4

1 0 1 2 3

90°

20 10 0.5 0.1 fc

Mount height: 1 ft Total LLF: 1

45°

Color W30S

3 = 3.5W 6 = 6.5W

-90°

Wattage

5 6

4 3 2

-0°

Code

10 5 0.5 0.1 fc

Isofootcandle Plot

approx. 65 cd max.

0°

Mount height: 1 ft Total LLF: 1

45°

L37 6.5W 3000K Std 475 lm

180°

-90° 0°

5 6

4 3 2

W30S = 3000K, std CRI

Finish MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82.

54 55

Image shows L91-2W30SNC0-MA

L91

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L91 2.5W Downlight Application Outdoor / indoor wall mounted for up or down illumination.

3-3/8” 3-3/8” 86mm 86mm

Source 2.5W LED Driver Integral 120V primary, 3W 700mA non-dimmable driver.

4-1/2” 4-1/2” Sq.Sq. 114mm 114mm Sq.Sq.

3-7/8” 3-7/8” 98mm 98mm

Power Consumption 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø2-5/8” Ø2-5/8” Ø67mm Ø67mm

3-1/4” 3-1/4” 83mm 83mm

Weight 2.02lbs (0.914kg) Material Anodized aluminum, insert trim with 1/4” (6mm) thick tempered glass lens. RoHS compliant.

Shown with angle bracket

Mounting Mounts to standard 4” (102mm) octagonal box (1-1/2”/ 38mm minimum depth). Can be positioned facing up or down.

Shown with no angle bracket

66 See page 192 for explanation of symbols and IP ratings.

L91 12°, clear lens 3000K Std 162 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

90°

1 -45°

approx. 1350 cd max.

45°

-90°

Mount height: 6 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

Lumen test results provided by LED chip manufacturer.

90°

-45°

approx. 550 cd max.

45°

-90°

Mount height: 6 ft Total LLF: 1

Wattage -

-0°

0°

L91

10 2.5 0.5 0.1 fc

Code

-0°

0°

L91 30°, clear lens 3000K Std 162 lm

20 5 0.5 0.1 fc

Color

Beam

Lens

Angle Bracket

2 2 = 2.5W

Finish -

W30S = 3000K, std CRI W20H = 2000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

C = clear F = frosted

0 = no angle 30 = 30° angle X = custom (30° max.)

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

56 57

Image shows L92-2W30SNC0-24MA

L92

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L92 2.5W Bollard Shown with angle bracket

Application Outdoor walkway and area illumination.

Shown with no angle bracket

Source 2.5W LED Driver Integral 120V primary, 3W 700mA non-dimmable driver. Power Consumption 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 7.15lbs (3.245kg) based on 24” (610mm) post. Material Anodized aluminum, insert trim with 1/4” (6mm) thick tempered glass lens. RoHS compliant. 7-3/8” 187mm

Mounting Mounts to 24” (610mm), 36” (614mm) or 48” (1219mm) anodized aluminum post. Comes with 24” (610mm) Cabtire lead inside post.

3/4” 19mm

5-1/2” 140mm

Ø2-5/8” Ø67mm

1-3/4” 44mm

3-7/8” 98mm

66 See page 192 for explanation of symbols and IP ratings.

L92 30°, clear lens 3000K Std 162 lm

Polar Candela Distribution

Isofootcandle Plot

180° -90°

90°

H (post height) 0 -45°

approx. 500 cd max.

45°

-0° -90°

0.1 fc Mount height: 3 ft Total LLF: 1

Polar Candela Distribution L92 120°, clear lens 180° 3000K Std approx. 162 lm -90° 55 cd max.

2-3/8” 60mm

Isofootcandle Plot 1

90°

2-3/8” 60mm

1/4” 6mm

1 0

-45°

45°

-0° -90°

Code

Wattage -

20 2.5 1

0.5

0.1 fc

4-1/2” 114mm

Mount height: 3 ft Total LLF: 1

0°

L92

0°

Lumen test results provided by LED chip manufacturer.

20 0.5

Color

Beam

Lens

Angle Bracket

2 2 = 2.5W

Post Height (H) -

W30S = 3000K, std CRI W20H = 2000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

C = clear F = frosted

0 = no angle 30 = 30° angle X = custom (30° max.)

6” Sq. 152mm Sq.

Finish MA

24 = 24” (610mm) 36 = 36” (914mm) 48 = 48” (1219mm)

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

58 59

Image shows L97-1W30SN-36MA

L97

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L97 6W/15W Bollard / L97E 14W Bollard

8-1/2” 216mm

Application Outdoor walkway and area illumination. Source L97: 6 x 1W, 350mA or 6 x 2.5W, 700mA LEDs L97E: 6 x 2.5W, 700mA LEDs Driver L97: Remote 120V primary, 350mA (6W) or 700mA (15W) driver (not included) L97E: Remote 120V primary, 700mA driver (not included)

1-5/8” 5-3/8” x 6-3/8” 41mm 137mm x 162mm

LED Input Voltage 24V DC Power Consumption L97: 8W / 18W L97E: 18W Post Height

Dimming Dimmable with dimming controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart. Weight 9.59lbs (4.35kg) based on 36” (914mm) post. Material Anodized aluminum. 1/4” (6mm) thick polycarbonate lens and silicone gaskets. RoHS compliant. Mounting Mounts to 36” (914mm) or 48” (1219mm) anodized aluminum post. Comes with 24” (610mm) Cabtire lead inside post.

1/4” 6mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes An appropriate 24V DC LED driver must be used with fixture. Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

4-1/2” 114mm

6” Sq. 152mm Sq.

67 See page 192 for explanation of symbols and IP ratings.

Polar Candela Distribution Polar Candela Distribution L97 L97 6 x 1W, 30° 6 x 1W, 30° 180° 180° 3000K Std 3000K Std 510 lm 510 lm -90° 90° -90°

Lumen test results provided by-45° LED chip manufacturer.

45° approx. approx. 1300 cd 1300 cd max. max.

-45°

0°

Isofootcandle Plot L97E Isofootcandle Plot

90°

45°

-0°

-90°

1 2

0 1

20 2.5 0.5 0.2

Polar Candela Polar Candela Distribution Distribution L97E 6 x 2.5W6 x 2.5W 180° 180° 03000K1 Std 3000K Std 630 lm 630 lm -90° -90° 90°

20 2.5 0.5 0.1 fc 0.2

-45°

approx. 520 cd max.

0.1 fc

Mount height: 3 ftheight: Total3LLF: Mount ft 1 Total LLF: 1

0°

-45°

0°

45° approx. 520 cd max.

Isofootcandle Isofootcandle Plot Plot

8-1/2” 216mm

6-3/8” 3

90°

45°

-0° -90°

5-3/8” -0° 137mm -90°

02162mm 1 2

0 10

20 10 2.520

1-5/8” 0.1 fc 2 41mm

0.5 0.1 fc

2.5 0.5

Mount height: Mount 3 ftheight: Total3LLF: ft 1 Total LLF: 1

0°

Post Height

Code L97

Wattage

Color

Beam

Post Height (H)

Finish

1 = 6 x 1W 2 = 6 x 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

Code

Light Distribution

L97

E E = elliptical light distribution

Color

2 2 = 6 x 2.5W

MA = matte clear anodized BA = black anodized 4-1/2” 114mm

*Only available in W30S & W20H.

Wattage

1/4” 6mm

36 = 36” (914mm) 48 = 48” (1219mm)

S = spot (12°) N = narrow flood (30°) F = flood (60°)

Post Height (H)

6” 152mm

Finish

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

36 = 36” (914mm) 48 = 48” (1219mm)

MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

Image shows L98-1W30SN-6MA

L98

www.mplighting.com

Application Outdoor / indoor wall mounted for up or down illumination.

6” 152mm

Source 6 x 1W, 350mA or 6 x 2.5W, 700mA LEDs

3-1/4” 83mm

Driver Remote 120V primary, 350mA (6W) or 700mA (15W) driver (not included). LED Input Voltage 24V DC

5-3/4” 146mm

Power Consumption 8W / 18W Dimming Dimmable with dimming controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart.

1/8” 3mm

4-3/8” 111mm

1-5/8” 41mm

Weight 2.24lbs (1.54kg).

5-3/8” 137mm

Wall, Floor & Ceiling Fixtures

L98 6W/15W LED Wall Sconce

Material Anodized aluminum or 316 stainless steel. 1/4” (6mm) thick polycarbonate lens and silicone gaskets. RoHS compliant. Mounting Mounts to standard octagonal box (not included) via universal round mounting bracket. Comes with standard 6’ (1829 mm) Cabtire water proof lead (longer leads available). Approval Wet and dry locations. Approved to US and Canadian standards by CSA. Notes An appropriate 24V DC LED driver must be used with fixture. Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

67 See page 192 for explanation of symbols and IP ratings.

L98 6 x 1W, 12° 3000K Std 510 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

-45°

approx. 2700 cd max.

45°

-0° -90°

Mount height: 9 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

1 -45°

approx. 6000 cd max.

45°

-0°

20 1 0.2 0.1 fc

-90° Mount height: 9 ft Total LLF: 1

0°

L98

90° 0

Code

0°

Lumen test results provided by LED chip manufacturer.

20 5 0.5 0.1 fc

L98 6 x 2.5W, 12° 3000K Std 972 lm

90°

Wattage

Color

Beam

Lead Length

Finish

6 = 6’ (1829mm) X = custom

MA = matte clear anodized BA = black anodized S6 = stainless steel 316

1 = 6 x 1W 2 = 6 x 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

62 63

Image shows L99-1W30SNW30SN-6MA

L99

www.mplighting.com

Application Outdoor / indoor wall mounted for up or down illumination. Source 12 x 1W, 350mA or 12 x 2.5W, 700mA LEDs

1/8” 3mm

6” 152mm 4-3/8” 111mm

3-1/4” 83mm

5-3/8” 137mm

Driver Remote 120V primary, 700mA driver (not included). LED Input Voltage 24V DC

1-5/8” 41mm

Power Consumption 17W / 35W

5-3/4” 146mm

Dimming Dimmable with 100W 24V LED driver and controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart. Weight 5.64lbs (2.56kg).

Wall, Floor & Ceiling Fixtures

L99 2 x 6W/15W LED Wall Sconce

67 See page 192 for explanation of symbols and IP ratings.

L99 12 x 1W, 30° 3000K Std 1020 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

-45°

approx. 1300 cd max.

45°

-0°

Mount height: 9 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

20 1 0.2

1 -45°

approx. 2400 cd max.

45°

-0°

0.1 fc

-90° Mount height: 9 ft Total LLF: 1

0°

L99

90° 0

Code

-90°

0°

Lumen test results provided by LED chip manufacturer.

20 1 0.2 0.1 fc

L99 12 x 2.5W, 30° 3000K Std 1944 lm

90°

Wattage

Color UP

Beam UP

Color Down

Beam Down

Lead Length

Finish

6 = 6’ (1829mm) X = custom

MA = matte clear anodized BA = black anodized S6 = stainless steel 316

1 = 6 x 1W 2 = 6 x 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

64 65

Image shows L130-7W30S30-MA

L130

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L130 7.5W Downlight Application Indoor surface mount downlight. Source 3 x 2.5W, 700mA LEDs Driver Integral 120V primary, 9W 700mA non-dimmable driver. Power Consumption 9W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.88lbs (0.39kg). Material Anodized aluminum. RoHS compliant. Mounting Mounts to standard octagonal box (not included). Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

3/4” 19mm

Ø4-3/4” Ø121mm

40 See page 192 for explanation of symbols and IP ratings.

L130 30° 3000K Std 486 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 1400 cd max.

45°

L130 60° 3000K Std 486 lm

Polar Candela Coefficients OfDistribution Utilization 80

-90° RW %:

50 30 1.12 1.12 1.05 1.03 1.00 .96 .94 .91 .90 .86 .86 .81 .82 .78 .79 .74 .76 .71 .73 0°.68 .70 .66

70 RCR: 0 1.12 1 1.08 2 1.03 3 .99 4 .96 -45° 5 .92 6 .89 7 .86 8 .83 9 .80 10 .77

Lumen test results provided by LED chip manufacturer.

1.7’

6.0’

37.24

3.4’

9.0’

16.55

5.0’

12.0’

9.31

6.7’

15.0’

5.96

8.4’

18.0’

4.14

10.1’

90° Spread: 31.3°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

148.95

0° Spread: 31.3°

0°

Beam Width

3.0’

70 0 70 1.12 1.09 1.02 1.05 .94 1.01 .87 .98 .82 .94 .78 approx..91 .74 450 cd.88 .71 max. .85 .68 .82 .65 .79 .63 .77

90° 50

1.09 1.03 .98 .93 .89 45° .85 .81 .78 .75 .72 .70

30 1.09 1.02 .95 .90 .85 .81 .77 .74 .71 .68 .66

Center Beam FC Beam Width 0 50 30 20 50 30 20 50 30 20 34.951.00 1.00 .96 3.5’ .96 2.7’ 3.0’ 1.05 1.05 1.00 .94 1.05 .96 .90 1.00 .98 .97 .96 .95 .94 .93 .96 .91 8.74 5.4’ 7.0’ 6.0’ .86 .95 .93 .91 .92 .90 .89 .90 .88 .87 3.88 .86 .84 .87 10.5’ .85 8.1’ .91 .88 .85 .89 .82 9.0’ .83 .87 .84 .81 .85 .79 12.0’ .79 2.18 .82 .80 .84 14.0’ .8110.7’ .75 .83 .80 .77 .82 .79 .76 .81 .78 .76 1.40 .76 .73 .78 17.5’ .7513.4’ .80 .76 .74 .79 .72 15.0’ .73 .77 .73 .70 .76 .70 18.0’ .70 0.97 .73 .70 .75 21.1’ .7216.1’ .67 .74 .70 .68 .73 .70 .67 .72 .69 .67 0° Spread: Spread: .71 .67 .6590°.70 .68 .6560.7° .64 .72 .67 48.2° .65 .62 .69 .65 .63 .68 .65 .62 .68 .65 .62

0 0 .94 .90 .85 .82 .78 .75 .71 .69 .66 .64 .61

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code L130

RW %: 70 50 RCR:Wattage 01.10 1.10 11.05 1.02 2 .99 .94 3 .94 7 .88 4 .89 .82 5 .84 .76 7 = 63 .80 x 2.5W .71 7 .76 .67 8 .72 .63 9 .68 .59 10 .65 .56

30 1.10 .99 .90 .83 .76 .71 .66 .61 .57 .54 .50

0 70 50 30 0 50 30 20 50 30 20 50 30 1.08 .93 1.03 1.03 1.03 .98 Beam 1.10 1.08 1.08 .98 .98 .94 .94 Color .97 1.02 1.00 .98 .86 .96 .94 .93 .93 .91 .90 .89 .88 .87 .97 .93 .89 .80 .90 .87 .84 .87 .84 .82 .84 .82 .79 .92 .86 .82 .74 .84 .80 .77 .81 .78 .76 .79 .77 .72 .87 .80 .75 .69 .78 .74 .71 .77 .73 .70 .75 .72 .66 .83 .75 .70 .64 .74 .69 .65 .72 .68 .65 .71 .67 W30S = 3000K, std CRI beam .65 .60 .61 .78 .71 .69 .64 30 .61 = .6830°.64 .60 .67 .63 .61 .56 .57 .75 .66 .57 = .6460°.60 .56 .63 .59 W20H = 2000K, high.65 CRI .60 60 beam .53 .71 .62 .57 .52 .61 .56 .53 .60 .56 .53 .59 .55 .50 .67 .59 .53 .49 .58 .53 .49 .57 .53 .49 .56 .52 .47 .64 .53 .50of 75~82 .46 .54while .49high .46CRI .55 .50 NOTE: Standard CRI.46 has .55 a value has.49 92.

0 20 0 .94 .93 Finish .87 .85 .80 .79 .74 .73 .69 .68 .64 .63 MA = matte clear anodized .60 .59 .55 .56 = BA black anodized .52 .51 .49 .48 .46 .45

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

66 67

Image shows L131-7W30S30-MA

L131

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L131 7.5W Downlight Application Outdoor / indoor surface mount downlight. Source 3 x 2.5W, 700mA LEDs Driver Integral 120V primary, 9W 700mA non-dimmable driver. Power Consumption 9W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.84lbs (0.38kg). Material Anodized aluminum. RoHS compliant. Mounting Mounts to standard octagonal box (not included). Approval Damp and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

3/4” 19mm

Ø4-3/4” Ø121mm

44 See page 192 for explanation of symbols and IP ratings.

L131 30° 3000K Std 486 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 1400 cd max.

45°

L131 60° 3000K Std 486 lm

Polar Candela Coefficients OfDistribution Utilization 80

-90° RW %:

50 30 1.12 1.12 1.05 1.03 1.00 .96 .94 .91 .90 .86 .86 .81 .82 .78 .79 .74 .76 .71 .73 0°.68 .70 .66

70 RCR: 0 1.12 1 1.08 2 1.03 3 .99 4 .96 -45° 5 .92 6 .89 7 .86 8 .83 9 .80 10 .77

Lumen test results provided by LED chip manufacturer.

1.7’

6.0’

37.24

3.4’

9.0’

16.55

5.0’

12.0’

9.31

6.7’

15.0’

5.96

8.4’

18.0’

4.14

10.1’

90° Spread: 31.3°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

148.95

0° Spread: 31.3°

0°

Beam Width

3.0’

70 0 70 1.12 1.09 1.02 1.05 .94 1.01 .87 .98 .82 .94 .78 approx..91 .74 450 cd.88 .71 max. .85 .68 .82 .65 .79 .63 .77

90° 50

1.09 1.03 .98 .93 .89 45° .85 .81 .78 .75 .72 .70

30 1.09 1.02 .95 .90 .85 .81 .77 .74 .71 .68 .66

0 0 .94 .90 .85 .82 .78 .75 .71 .69 .66 .64 .61

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code L131

RW %: 70 50 RCR:Wattage 01.10 1.10 11.05 1.02 2 .99 .94 3 .94 7 .88 4 .89 .82 5 .84 .76 7 = 63 .80 x 2.5W .71 7 .76 .67 8 .72 .63 9 .68 .59 10 .65 .56

30 1.10 .99 .90 .83 .76 .71 .66 .61 .57 .54 .50

0 20 0 .94 .93 Finish .87 .85 .80 .79 .74 .73 .69 .68 .64 .63 MA = matte clear anodized .60 .59 .55 .56 = BA black anodized .52 .51 .49 .48 .46 .45

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

68 69

Image shows L134-10W30S30NA-MA

L134

www.mplighting.com

Wall, Floor & Ceiling Fixtures

L134 4W / 10W Downlight Application Outdoor / indoor surface mount downlight. Source 4 x 1W, 350mA or 4 x 2.5W, 700mA LEDs Driver Integral 120V primary, 10W 350mA (4W) or 17W 700mA (10W) nondimmable driver. Power Consumption 6W / 12W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart. Weight 2.02lbs (0.92kg). Material Anodized aluminum. RoHS compliant.

2-1/8” Sq. 54mm Sq.

6-3/4” Sq. 171mm Sq.

1-1/8” 29mm

Mounting Mounts to standard octagonal box (not included).

3/8” 10mm

Approval Damp and dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

44 Shown with no accessory (NA)

See page 192 for explanation of symbols and IP ratings.

L134 4 x 1W, 30° 3000K Std 396 lm

Polar Candela Distribution

Shown with black cross baffle (CB) Used to reduce glare.

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 800 cd max.

45°

L134 4 x 1W, 60° 3000K Std 370 lm

Polar Candela Coefficients OfDistribution Utilization RCC %:

70 50 RCR: 01.09 1.09 11.04 1.01 2 .99 .95 3 .95 .89 4 .91 .84 -45° 5 .87 .80 6 .83 .76 7 .80 .73 8 .77 .70 9 .75 .67 10 .72 .64

Lumen test results provided by MP Lighting integrating sphere (see page 194).

30 1.09 .99 .91 .85 .80 .75 .71 .68 .65 0°.62 .60

1.7’

6.0’

22.64

3.5’

3.4’

9.0’

10.06

5.2’

5.1’

12.0’

5.66

6.9’

6.8’

15.0’

3.62

8.7’

8.5’

18.0’

2.52

10.4’

10.2’

90° Spread: 31.6°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

-90° RW %:

90.56

0° Spread: 32.2°

0°

Beam Width

3.0’

70 0 70 1.09 1.06 .97 1.02 .88 .97 .82 .93 .76 .89 .72 approx..86 .68 300 cd.82 .65 max. .79 .62 .76 .59 .74 .57 .71

90° 50 1.06 .99 .93 .88 .83 45° .79 .76 .72 .69 .66 .64

30 1.06 .97 .90 .84 .79 .75 .71 .68 .65 .62 .59

Center Beam FC Beam Width 0 50 30 20 50 30 20 50 30 20 3.5’.93 3.5’ 3.0’ 1.01 1.01 32.38 .97 .97 .97 .93 .91 1.01 .93 .86 .96 .94 .93 .92 .91 .90 .89 .88 .87 8.10 7.0’ 7.1’ 6.0’ .81 .90 .88 .86 .88 .86 .84 .85 .84 .82 3.60 .81 .79 .81 10.6’.79 10.4’ .86 .82 .80 .83 .77 .77 9.0’ .81 .78 .75 .80 .73 .73 12.0’ 2.02 .77 .74 .78 14.2’.75 13.9’ .69 .78 .74 .71 .76 .73 .70 .75 .72 .70 1.30 .69 .67 .72 17.7’.69 17.4’ .74 .70 .67 .73 .66 .66 15.0’ .71 .67 .64 .70 .63 .63 18.0’ 0.90 .66 .64 .69 21.3’.66 20.9’ .61 .68 .64 .61 .67 .64 .61 .67 .63 .61 Spread: 60.2° .65 .61 .58 90°.64 .62 .5961.2° .61 .58 .58 .660° Spread: .56 .63 .59 .56 .63 .59 .56 .62 .58 .56

0 0 .91 .86 .81 .76 .72 .68 .65 .62 .60 .57 .55

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code L134

RW Wattage %: 70 50

RCR: 01.09 11.03 2 .97 3 .92 4 =4 4.87x 5 .82 10 =6 4.78x 7 .74 8 .70 9 .66 10 .63

Color 50 30

30 0 70 0 50 30 20 Beam 50 30 20 50 30 Accessories 20 0 .97 .97 .97 .91 .93 .93 .93 1.09 1.09 1.09 1.06 1.06 1.06 .91 1.01 1.01 1.01 .91 .90 .88 .84 .88 .87 .86 1.00 .98 .96 1.01 .98 .96 .85 .95 .93 .91 .85 .83 .81 .77 .83 .81 .79 .93 .88 .85 .95 .91 .87 .78 .88 .85 .82 .80 .76 .74 .71 .77 .75 .72 .86 .81 .77 .90 .84 .80 .72 .82 .78 .75 .74 .71 .68 .76 .72 30 .68= 30° .65 .78 .73std .66CRI .73 .69 .67 .79 .74 W30S = .70 .85 3000K, 1W beam NA = no accessory .70 .66 .62 .60 .68 .65 .62 .74 .68 .64 .81 .73 .68 .62 .71 .67 .63 2.5W beam CB .60=.57 cross.56 baffle, black .65 .61 .58 .67 .62 60 .58= 60° .68 .63high .57 CRI .64 .69 .63 W20H = .59 .76 2000K, .61 .57 .54 .52 .60 .56 .53 .64 .59 .54 .72 .64 .58 .53 .63 .58 .54 .58 .53 .50 .49 .57 .53 .50 .60 .55 .51 .69 .60 .54 .50 .59 .54 .50 Standard value.50 of 75~82 high .47 while .45 .56 CRI .51 has .47 a .55 .54 92. .50 .47 .57 .51 NOTE: .47 .65 .55 .50 .47CRI has .43 .51 .47 .44 .54 .48 .44 .62 .53 .48 .44 .52 .47 .44 .52 .47 .44

Finish MA = matte clear anodized BA = black anodized

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

70 71

Image shows L135-9W30S30-MA

L135

www.mplighting.com

Application Indoor surface mount downlight. Source 1 x 4.5W, 350mA or 1 x 9.5W, 700mA LED. Driver Remote 120V primary, 8W 350mA (4.5W) or 17W 700mA (9.5W) non-dimmable driver (included). Power Consumption 5W / 11W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 1.14lbs (0.52kg). 5/8” 16mm

Material Anodized aluminum. RoHS compliant.

6” Sq. 152mm Sq.

Wall, Floor & Ceiling Fixtures

L135 4.5W / 9.5W Downlight

Mounting Mounts to standard octagonal box (not included). Approval Dry locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

40 See page 192 for explanation of symbols and IP ratings.

L135 4.5W, 30° 3000K Std 320 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 850 cd max.

45°

Polar Candela Coefficients OfDistribution Utilization RCC %: -90° RW %:

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

Lumen test results provided by LED chip manufacturer.

180°

Beam Width

3.0’

93.74

1.7’

6.0’

23.44

3.5’

3.4’

9.0’

10.42

5.2’

12.0’

5.86

6.9’

15.0’

3.75

8.6’

18.0’

2.6

10.4’

10.3’

0° Spread: 32.1°

0°

L135 9.5W, 30° 3000K Std 560 lm

Center Beam FC

90°

90° Spread: 32.0°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

Center Beam FC Beam Width 70 50 30 0 70 90° 50 30 0 50 30 20 50 30 20 50 30 20 0 1.7’ 1.01 1.7’ 1.07 1.07 1.07 1.03 1.12 1.12 1.12 164.05 1.20 1.20 1.20 1.20 1.17 1.17 1.17 1.01 3.0’ 1.03 1.03 .95 1.15 1.12 1.10 1.08 1.12 1.10 1.08 .95 1.06 1.04 1.03 1.02 1.01 1.00 .99 .98 .97 41.01 3.4’ 3.5’ 6.0’ .90 1.10 1.05 1.02 .98 1.08 1.04 1.00 .90 1.00 .98 .95 .97 .95 .93 .95 .93 .91 5.2’.88 5.2’ .93 .90 .88 .91 .95 .92 .89 18.23 .85 1.05 .99 .95 .91 1.03 .98 .94 .86 9.0’ .86 .89 .86 .83 .87 .91 .87 .84 10.25 .81 1.01 .94 .89 .85 .99 .93 .88 .81 12.0’ .84 .82 6.9’ 6.9’ 45° .77 .97 .89 .84 .80 approx..95 .88 .84 .78 .87 .82 .79 .85 .81 .79 .84 .80 .78 6.56 .78 .75 .80 8.6’.77 8.6’ .83 .78 .75 .81 .91 .84 .79 .74 15.0’ .73 .93 .85 .80 .76 .74 1500 cd .79 .75 .72 .78 .70 .89 .81 .76 .72 .71 max. .88 .81 .76 .71 18.0’ 4.56 .74 .71 .77 10.4’.74 10.3’ .67 .86 .78 .72 .69 .85 .77 .72 .68 .76 .72 .69 .75 .71 .68 .74 .71 .68 0° Spread: Spread: 32.0° .64 .72 .68 .6590°.72 .69 .6632.1° .83 .740°.69 .66 .82 .74 .69 .65 .73 .68 .65 .62 .80 .72 .67 .63 .79 .71 .66 .63 .70 .66 .63 .70 .66 .63 .69 .65 .63

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code L135

RW %: 70 50 30 0 70 50 30 0 50 30 20 50 30 20 Wattage Color Beam RCR: 0 1.20 1.20 1.20 1.20 1.17 1.17 1.17 1.01 1.12 1.12 1.12 1.07 1.07 1.07 1 1.15 1.12 1.10 1.08 1.12 1.10 1.08 .95 1.06 1.04 1.03 1.02 1.01 1.00 2 1.10 1.05 1.02 .98 1.08 1.04 1.00 .90 1.00 .98 .95 .97 .95 .93 W30S 3 1.05 .99 .95 .91 1.03 .98 .94 .86 .95 .92 .89 .93 .90 .88 4 1.01 .94 .89 .85 .99 .93 .88 .81 .91 .87 .84 .89 .86 .83 4 = 51 x.97 4.5W 20° .81 beam .79 .79= .85 .88 .84 std .78CRI.87 .82 20 .89 .84W30S = .80 .95 3000K, 6 .85 .80 .76 .91 .84 .79 .74 .83 .78 .75 .81 .78 .75 9 = 71 x.93 9.5W 30 = 30° beam .89 .81 .76 .72 .88 .81 .76 .71 .79 .75 .72 .78 .74 .71 8 .86 .78 .72 .69 .85 .77 .72 .68 .76 .72 36 .68 .69= .75 36° .71 beam 9 .83 .74 .69 .66 .82 .74 .69 .65 .73 .69 .66 .72 .68 .65 10 .80 .72 .67 .63 .79 .71 .66 .63 .70 .66 .63 .70 .66 .63

50 30 20 0 Finish 1.03 1.03 1.03 1.01 .95 .99 .98 .97 .90 .95- .93 .91 .85 .91 .88 .86 .81 .87 .84 .82 MA = .77 clear anodized .84 .80 .78 matte .73 .80 .77 .74 BA = black anodized .70 .77 .74 .71 .67 .74 .71 .68 .64 .72 .68 .65 .62 .69 .65 .63

NOTE: Standard CRI has a value of 75~82.

72 73

Image shows L141-NINDW30S30R1-W

L141 13W Recessed Downlight Application Indoor downlight with field replaceable LED lamp. Source 13W, 700mA LED Driver Integral 120V AC or 277V AC, 17W 700mA dimmable or non-dimmable driver (please specify). Power Consumption 15W

6-1/8” 156mm

Dimming 0-10V (120V input only, dimmable driver optional). A control lead is required to connect each dimmable driver to the controlling dimmer switch. See page 186-190 for Recommended Driver Chart. Weight Non-insulated, 5.17lbs (2.35kg). Insulated, 6.21lbs (2.82kg). Retrofit, 5.16 lbs (2.34kg). Material Aluminum. RoHS compliant.

Ø4-7/8” Ø124mm

Wall, Floor & Ceiling Fixtures

Shown as insulated housing (IC), white finish (W) and round trim (R)

L141

www.mplighting.com

7-5/8” 194mm

Mounting Mounts into insulated ceiling box. Recessed mount non-insulated version to ceiling with spring clip. Ceiling Cutout Size 4” (102mm).

9-1/2” 241mm

Approval Dry and damp locations. Approved to US and Canadian standards by CSA.

Up to 24” / 610mm

Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

Shown as non-insulated housing (NI), white finish (W) and round trim (R)

44 See page 192 for explanation of symbols and IP ratings.

L141 30° 3000K Std 565 lm

Polar Candela Distribution

-90°

Center Beam FC

90°

-45°

approx. 2700 cd max.

5-3/8” 137mm

45°

Beam Width

3.0’

299.72

1.5’

6.0’

74.93

3.1’

9.0’

33.30

4.6’

12.0’

18.73

6.2’

15.0’

11.99

7.7’

18.0’

8.33

9.2’

0° Spread: 28.8°

0°

la Distribution

Illuminance at a Distance

180°

90° Spread: 28.8°

Ø4-7/8” Shown 7-5/8” as retrofit housing (R), 194mm Ø124mm black finish (B) and square

Illuminance at a Coefficients Distance Of Utilization

trim (S) Effective Floor Cavity Reflectance: 20%

180° 90°

3.0’ 6.0’ 9.0’

approx. 2700 cd max.

45°

12.0’ 15.0’ 18.0’ 0°

0°

80 70 50 30 10 RCC %: Center Beam FC Beam Width RW %: 70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 299.72 1.5’1.191.5’ 1.19 1.17 1.17 1.17 1.00 1.11 1.11 1.11 1.07 1.07 1.07 1.02 1.02 1.02 RCR: 0 1.19 1.19 1 1.15 1.12 1.10 1.08 1.12 1.10 1.08 .96 1.06 1.05 1.03 1.02 1.01 1.00 .99 .98 .97 74.93 3.1’ 3.1’ 2 1.10 1.06 1.02 .99 1.08 1.04 1.01 .91 1.01 .98 .96 .98 .96 .94 .95 .94 .92 Lumen test 33.30 4.6’ .964.6’ 3 1.06 1.00 .92 1.04 .99 .95 .87 .96 .93 .90 .94 .91 .89 .92 .89 .87 provided 4 1.01 .95 .87 1.00results .94 .89 .83 .92 .88 .85 .90 .87 .84 .88 .85 .83 18.73 6.2’ .906.2’ 5 .97 .90 .85 .82 .96by .89 MP Lighting .85 .79 .88 .84 .80 .86 .82 .80 .84 .82 .79 11.99 7.7’ .817.7’ 6 .93 .86 .77 .92integrating .85 .80 .75 .84 .80 .76 .82 .79 .76 .81 .78 .75 7 .90 .82 .73 .89 .81 .77 .72 .80 .76 .73 .79 .75 .72 .78 .75 .72 8.33 9.2’ .779.2’ sphere (see 8 .86 .78 .73 .70 .85 .78 .73 .69 .77 .73 .69 .76 .72 .69 .75 .72 .69 Spread: 28.8° 90° .75 Spread: 9 .83 .70 28.8° .67 .82page .75194). .70 .66 .74 .69 .66 .73 .69 .66 .72 .69 .66 10 .80 .72 .67 .64 .79 .72 .67 .63 .71 .67 .64 .70 .66 .64 .70 .66 .63

0 0 1.00 .95 .91 .86 .82 .78 .74 .71 .68 .65 .62

9-1/2” 241mm 4-3/4” 121mm

Sq.4-7/8” Sq.124mm

Effective Floor Cavity Reflectance: 20%

50 30 0 1.19 1.19 1.19 1.12 1.10 1.08 1.06 1.02 .99 1.00 .96 .92 .95 .90 .87 .90 .85 .82 .86 .81 .77 .82 .77 .73 .78 .73 .70 .75 .70 .67 .72 .67 .64

70 50 30 0 50 30 20 50 30 20 50 30 20 1.17 1.17 1.17 1.00 1.11 1.11 1.11 1.07 1.07 1.07 1.02 1.02 1.02 1.12 1.10 1.08 .96 1.06 1.05 1.03 1.02 1.01 1.00Housing .99 .98 .97 Code 1.08 1.04 1.01 .91 1.01 .98 .96 .98 .96 .94 .95 .94 .92 1.04 .99 .95 .87 .96 .93 .90 .94 .91 .89 .92 .89 .87 L141 1.00 .94 .89 .83 .92 .88 .85 - .90 .87 .84 .88 .85 .83 .96 .89 .85 .79 .88 .84 .80 .86 .82 .80 .84 .82 .79 .92 .85 .80 .75 .84 .80 .76 .82 .79 .76 .81 .78 .75 NI = .89 .81 .77 .72 .80 .76 .73 .79 .75 non-insulated .72 .78 .75 .72 .85 .78 .73 .69 .77 .73 .69 .76 .72 insulated .69 .75 .72 .69 IC = .82 .75 .70 .66 .74 .69 .66 .73 .69 .66 .72 .69 .66 R .66 = retrofit (old.66code: .79 .72 .67 .63 .71 .67 .64 .70 .64 .70 .63

5-3/8” 137mm

11-1/8” 283mm

Of Utilization 80

Up to 24” / 610mm 5/8” 16mm

0 0 1.00 .95 .91 .86 .82 .78 .74 .71 .68 .65 NI).62

Dimming

Color

Reflector

Trim

Input Voltage

Finish -

ND = non-dimmable D = dimmable (not available in 277V)

W30S = 3000K, std CRI W50S = 5000K, std CRI

30 = 30° 45 = 45°

R = round S = square

1 = 120V 2 = 277V*

W = white B = black

*277V only available in non-dimmable driver (ND).

NOTE: Standard CRI has a value of 75~82.

Image shows L142-ICND9W30S36-WH

L142

www.mplighting.com

Application Indoor adjustable LED downlight. Source 9.5W, 700mA LED Driver Integral 120V primary, 17W 700mA dimmable or non-dimmable driver (please specify). Power Consumption 12W Dimming 0-10V (120V input only, dimmable driver optional). A control lead is required to connect each dimmable driver to the controlling dimmer switch. See page 186-190 for Recommended Driver Chart. Weight 3.45lbs (1.57kg). Material Aluminum. RoHS compliant.

Wall, Floor & Ceiling Fixtures

Shown as insulated housing (IC) with white finish (WH).

L142 9.5W Recessed Downlight (0~30°)

<30°

Mounting Mounts into insulated ceiling box with spring clips.

6-1/8” 156mm

Ceiling Cutout Size 3.5” (89mm). Approval Dry and damp locations. Approved to US and Canadian standards by CSA. Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

Ø4-1/8” Ø105mm

7-5/8” 194mm

44 See page 192 for explanation of symbols and IP ratings. 9-1/2” 241mm Up to 24” (610mm)

L142 36° 3000K Std 525 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 1100 cd max.

45°

3.0’

118.14

1.5’

6.0’

29.54

3.0’

9.0’

13.13

4.4’

4.5’

12.0’

7.38

5.9’

6.0’

15.0’

4.73

7.4’

7.5’

18.0’

3.28

8.9’

9.0’

0° Spread: 27.8°

0°

ela Distribution

Shown as non-insulated housing (NI) with black finish (BK).

Beam Width

90° Spread: 28°

Illuminance at a Coefficients Distance Of Utilization Effective Floor Cavity Reflectance: 20%

180° 90°

3.0’ 6.0’ 9.0’

approx. 1100 cd max.

12.0’

45°

15.0’ 18.0’ 0°

0°

RCC %: Center Beam FC RW %: RCR: 0 118.14 1 29.54 2 13.13 3 4 7.38 5 4.73 6 7 3.28 8 Spread: 27.8° 9 10

Beam Width 70 50 30 0 1.5’ .631.5’ .63 .63 .63 .60 .59 .56 3.0’ .583.0’ .58 .55 .53 .52 4.4’ .504.5’ .55 .52 .48 .53 .50 .45 5.9’ .476.0’ .51 .48 .45 .43 7.4’ .437.5’ .50 .46 .41 .48 .44 .40 8.9’ .419.0’ .46 .42 .40 .38 90° .41 Spread: .45 .38 28° .37 .44 .40 .37 .35

70 50 30 0 .62 .62 .62 .52 .59 .58 .57 .49 .57 .54 .53 .47 Lumen .54 .52 test .50 .45 results .52 .49 provided .47 .43 .51 .45 .41 by .47 MP Lighting .49 .45 .43 .40 integrating .47 .44 .41 .38 sphere (see .37 .46 .42 .40 page .44 .41194). .38 .36 .43 .39 .37 .35

50 .59 .55 .53 .50 .48 .46 .44 .43 .41 .40 .39

30 .59 .54 .51 .48 .46 .44 .42 .41 .39 .38 .37

30 20 .59 .54 .50 .47 .45 .42 .41 .39 .38 .36 .35

50 .56 .53 .51 .49 .47 .45 .44 .42 .41 .40 .38

30 .56 .52 .50 .47 .45 .43 .42 .40 .39 .38 .36

10 20 .56 .52 .49 .46 .44 .42 .40 .39 .37 .36 .35

50 .53 .51 .49 .47 .46 .44 .43 .42 .40 .39 .38

30 .53 .51 .48 .46 .44 .43 .41 .40 .39 .37 .36

0 20 .53 .50 .47 .45 .43 .42 .40 .39 .37 .36 .35

0 .52 .49 .47 .44 .43 .41 .39 .38 .37 .35 .34

5-5/8” 143mm

9-1/2” x 7-5/8” 241mm x 194mm

s Of Utilization Effective Floor Cavity Reflectance: 20%

80 50 .63 .59 .55 .52 .50 .48 .46 .44 .42 .41 .40

70 30 .63 .58 .53 .50 .47 .45 .43 .41 .40 .38 .37

0 .63 .56 .52 .48 .45 .43 .41 .40 .38 .37 .35

70 .62 .59 .57 .54 .52 .51 .49 .47 .46 .44 .43

50 .62 .58 .54 .52 .49 .47 .45 .44 .42 .41 .39

50 30 .62 .57 .53 .50 .47 .45 .43 .41 .40 .38 .37

0 .52 .49 .47 .45 .43 .41 .40 .38 .37 .36 .35

50 30 Code .59 .59 .55 .54 .53 .51 L142 .50 .48 .48 .46 .46 .44 .44 .42 .43 .41 .41 .39 .40 .38 .39 .37

30 20 .59 .54 .50 .47 .45 .42 .41 .39 .38 .36 .35

50 30 20 50 30 20 .56 .56 .56 Housing .53 .53 .53 .53 .52 .52 .51 .51 .50 .51 .50 .49 .49 .48 .47 .49 .47 .46 .47 .46 .45 .47 .45 .44 .46 .44 .43 .45 .43 insulated .42 .44 .43 .42 IC = .44 .42 .40 .43 .41 .40 NI = .42 .40 non-insulated .39 .42 .40 .39 .41 .39 .37 .40 .39 .37 .40 .38 .36 .39 .37 .36 .38 .36 .35 .38 .36 .35

0 0 .52 .49 .47 .44 .43 .41 .39 .38 .37 .35 .34

Dimming

Wattage

7-5/8” ColorØ2-7/8” Ø73mm 194mm

9 ND = non-dimmable D = dimmable

9 = 9.5W

Finish Ø4-1/8” Ø105mm

Beam -

W30S = 3000K, std CRI W41S = 4100K, std CRI

16 = 16° 22 = 22° 9-1/2” 36 = 36°

WH = white BK = black

241mm

NOTE: Standard CRI has a value of 75~82.

76 77

Image shows L151-3W30S30-MA

L151

www.mplighting.com

Application Outdoor / indoor wall, stair, and walkway illumination. Source 3 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA constant current or 12V constant voltage driver (not included). LED Input Voltage 12V DC Power Consumption 4W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

3/4” 19mm

4-5/8” 117mm

Wall, Floor & Ceiling Fixtures

L151 3 x 1W Surface Mount Strip Light

Weight 0.30lbs (0.135kg). Material Anodized aluminum. RoHS compliant. Mounting Surface mount with 6” (152mm) wire lead. Approval Wet and dry locations. Approved to US and Canadian standards by CSA.

1-1/4” 32mm

Note Can be used as emergency backup lighting in conjunction with Bodine emergency LED driver (sold separately). Consult factory.

5-1/4” 133mm

66 See page 192 for explanation of symbols and IP ratings.

L151 12° 3000K Std 255 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

-45°

approx. 1100 cd max.

45°

-0° -90°

Mount height: 3 ft Total LLF: 1

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

-45°

approx. 600 cd max.

45°

-0° -90°

2 3

Mount height: 3 ft Total LLF: 1

Wattage -

20 1 0.2 0.1 fc

0°

L151

90° 0

Code

0°

Lumen test results provided by LED chip manufacturer.

20 1 0.2 0.1 fc

L151 30° 3000K Std 255 lm

90°

Color

Beam

3 3 = 3 x 1W

Finish -

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

12 = 12° beam 30 = 30° beam 60 = 60° beam

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

78 79

Image shows L181M-W30S-BA and RAL181-4-BA

L181

www.mplighting.com 1/4 5/8 2 3/8

9” 229mm

Application Modular bottle rack system for restaurants, bars, and wine cellars with 100% no UV and no heat.

top arm module

1” 25mm

Source 1W, 350mA LED per arm

3/4” 19mm

adjustable**

Driver Remote 120V primary, 350mA driver (not included). LED Input Voltage 4V DC

8” 203mm

adjustable

Power Consumption 1.5W per arm Dimming 0~10V dimming with remote driver (not included). Requires minimum load of LEDs. See page 186-190 for Recommended Driver Chart.

middle arm module

Wall, Floor & Ceiling Fixtures

L181 Modular Wine Rack

Weight 10.8lb (4.898kg) with 3-1/2’ (1.073m) rail. Material Black anodized aluminum. RoHS compliant. Mounting Mounts to wall with 6” (152mm) wire lead per arm.

bottom arm module

Approval Interior rated. Approved to US and Canadian standards by CSA.

custom length rail

Note: 9” (229mm) spacing recommended between arm modules.

See page 192 for explanation of symbols and IP ratings.

L181T 3000K Std 85 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

Center Beam FC

90°

-45°

approx. 30 cd max.

45°

475.78

0.4’

0.5’

118.95

0.8’

0.9’

0.8’

52.86

1.3’

1.0’

29.74

1.7’

1.3’

19.03

2.1’

2.2’

1.5’

13.22

2.5’

2.6’

0° Spread: 79.6°

0°

Top Arm Module has LED and no cross bars. Code L181T

Color -

W27S = 2700K, std CRI W30S = 3000K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

Top arm

L181M Middle arm

Color -

W27S = 2700K, std CRI W30S = 3000K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

90° Spread: 81.9°

Bottom Arm Module has cross bars and no LED. Finish

Code

L181B

BA = black anodized

Bottom arm

Middle Arm Module has LED and cross bars. Code

Beam Width

0.3’

Finish -

BA BA = black anodized

Rail comes with rubber cover. Finish

Code

RAL181

BA = black anodized

Rail

Length -

Finish -

X = custom by foot

BA BA = black anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

80 81

Image shows L51-1W30S120-MA

L51

www.mplighting.com

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 1W, 350mA or 2.5W, 700mA LED Driver Remote 120V primary, 350mA (1W) or 700mA (2.5W) driver (not included). 1” 25mm

LED Input Voltage 4V DC Power Consumption 1.5W / 3W

Cabinet Fixtures

L51 1W / 2.5W Puck Light

1/2” 13mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.06lbs (0.029kg).

Ø1-1/2” Ø38mm

Material Aluminum. RoHS compliant. Mounting Surface mount to cabinet millwork. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm). Approval Dry locations. Approved to US and Canadian standards by CSA.

40 See page 192 for explanation of symbols and IP ratings.

L51 1W, 120° 3000K Std 85 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 30 cd max.

45°

123.49

1.2’

1.0’

30.87

2.5’

2.4’

1.5’

13.72

3.7’

2.0’

7.72

5.0’

4.9’

2.5’

4.94

6.2’

6.1

3.0’

3.43

7.5’

7.3’

0° Spread: 102.4°

0°

L51 2.5W, 120° 3000K Std 162 lm

Polar Candela Distribution

90° Spread: 101.5°

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

Center Beam FC

90°

-45°

approx. 55 cd max.

45°

Code

218.25

1.3’

1.0’

54.56

2.5’

1.5’

24.25

3.8’

2.0’

13.64

5.0’

2.5’

8.73

6.3’

6.3

3.0’

6.06

7.6’

7.5’

0° Spread: 103.2°

Wattage

Color

W30S = 3000K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI

90° Spread: 102.8°

Beam 120

1 = 1W 2 = 2.5W*

Beam Width

0.5’

0°

L51

Beam Width

0.5’

120 = 120° beam

Finish MA = matte clear anodized BA = black anodized BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

82 83

Image shows L52-1W30S120-MA

L52

www.mplighting.com

120°

Cabinet Fixtures

Ø1-5/8” Ø41mm

L52 1W / 2.5W Puck Light

Power Consumption 1.5W / 3W 1/2” 13mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø1-3/8” Ø35mm

1/8” 3mm

Weight 0.07lbs (0.03kg). Ø2” Ø51mm

Material Anodized aluminum. RoHS compliant. Mounting Recessed mount to cabinet millwork. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm). Cutout Size Ø1-3/8” (Ø35mm) Approval Dry locations. Approved to US and Canadian standards by CSA.

40 See page 192 for explanation of symbols and IP ratings.

L52 1W, 120° 3000K Std 85 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 30 cd max.

45°

123.00

1.5’

1.0’

30.75

3.1’

3.0’

1.5’

13.67

4.6’

4.5’

2.0’

7.69

6.2’

6.0’

2.5’

4.92

7.7’

7.5’

3.0’

3.42

9.2’

9.0’

0° Spread: 113.9°

0°

L52 2.5W, 120° 3000K Std 162 lm

Polar Candela Distribution

90° Spread: 112.4°

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

Center Beam FC

90°

-45°

approx. 55 cd max.

45°

Code

217.51

1.5’

1.0’

54.38

3.0’

3.1’

1.5’

24.17

4.5’

4.6’

2.0’

13.59

6.0’

6.2’

2.5’

8.70

7.5’

7.7’

3.0’

6.04

9.0’

9.3’

0° Spread: 112.4°

Wattage

Color

W30S = 3000K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI

90° Spread: 114.1°

Beam 120

1 = 1W 2 = 2.5W*

Beam Width

0.5’

0°

L52

Beam Width

0.5’

120 = 120° beam

Finish MA = matte clear anodized BA = black anodized BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

84 85

Image shows L55-3W27S120-MA

L55

www.mplighting.com

1-1/2” 38mm

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 3 x 1W, 350mA LEDs Driver Remote 120V or 277V primary, 350mA driver (not included). LED Input Voltage 12V DC Power Consumption 4W

Cabinet Fixtures

L55 3W Puck Light

1/2” 13mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Ø2-3/8” Ø60mm

Weight 0.19lbs (0.087kg). Material Anodized aluminum. RoHS compliant. Mounting Surface mount to cabinet millwork. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm). Approval Dry locations. Approved to US and Canadian standards by CSA.

40 See page 192 for explanation of symbols and IP ratings.

L55 120° 3000K Std 255 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

Center Beam FC

90°

-45°

approx. 90 cd max.

45°

376.89

0.8’

1.0’

94.22

1.6’

1.5’

41.88

2.4’

2.3’

2.0’

23.56

3.2’

3.1’

2.5’

15.08

4.0’

3.9’

3.0’

10.47

4.8’

4.6’

0° Spread: 77.4°

0°

Code L55

Wattage -

Color

3 3 = 3 x 1W

Beam Width

0.5’

Beam 120

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

90° Spread: 75.2°

120 = 120° beam

Finish MA = matte clear anodized BA = black anodized BN = brushed nickel

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

86 87

Image shows L56-3W30S120-MA

L56

www.mplighting.com

1-1/2” 38mm

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 3 x 1W, 350mA LEDs Driver Remote 120V or 277V primary, 350mA driver (not included).

integral friction fit spring for easy mounting

LED Input Voltage 12V DC

Cabinet Fixtures

L56 3W Puck Light

Power Consumption 4W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

1/8” 3mm

Ø2-1/2” Ø64mm

3/8” 10mm

Weight 0.37lbs (0.167kg). Material Anodized aluminum. RoHS compliant.

Ø3” Ø76mm

Mounting Recessed mount to cabinet millwork with friction fit spring clip. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm). Cutout Size Ø2-1/2” (Ø64mm) Approval Dry locations. Approved to US and Canadian standards by CSA.

40 See page 192 for explanation of symbols and IP ratings.

L56 120° 3000K Std 91 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by MP Lighting integrating sphere (see page 194).

Center Beam FC

90°

-45°

approx. 90 cd max.

45°

371.99

0.6’

1.0’

93.00

1.2’

1.1’

1.5’

41.33

1.8’

1.7’

2.0’

23.25

2.4’

2.3’

2.5’

14.88

3.0’

2.8’

3.0’

10.33

3.6’

3.4’

0° Spread: 61.5°

0°

Code L56

Wattage -

Color

3 3 = 3 x 1W

Beam Width

0.5’

Beam 120

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

90° Spread: 58.9°

120 = 120° beam

Finish MA = matte clear anodized BA = black anodized BN = brushed nickel

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

88 89

Image shows L57S-3W30S60NA-MA

L57

www.mplighting.com

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 3 x 1W, 350mA LEDs integral friction fit spring for easy mounting

Driver Remote 120V primary, 350mA constant current or 12V constant voltage driver (not included). Shown as semi-recessed (S) mount with no accessory (NA).

LED Input Voltage 12V DC

3/8” 10mm

Ø2-1/2” Ø64mm

1/2” 13mm

Cabinet Fixtures

L57 3W Recessed Puck Light

Power Consumption 4W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

Ø3” Ø76mm

Weight 0.37lbs (0.167kg). Material Anodized aluminum. RoHS compliant.

integral friction fit spring for easy mounting

Ø2-1/2” Ø64mm

Mounting Semi-recessed or fully-recessed fixture body mounts to millwork with friction fit spring clip. Comes with 6’ (1829mm) wire lead. Fullyrecessed mount requires minimum of 7/8” (22mm) depth. 7/8” 22mm

Cutout Size Ø2-1/2” (Ø64mm)

7/8” 22mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø3” Ø76mm

Shown as fully-recessed (F) mount with silver metal shroud (SH).

40 See page 192 for explanation of symbols and IP ratings.

L57 30°, NA 3000K Std 188 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

45°

approx. 650 cd max.

L57 60°, NA 3000K Std 173 lm Lumen test results provided by MP Lighting integrating sphere (see page 194).

Polar Candela Distribution

0.5’

2.0’

145.90

1.1’

1.0’

3.0’

64.84

1.6’

1.5’

4.0’

36.47

2.1’

2.0’

5.0’

23.34

2.6’

2.5’

6.0’

16.21

3.2’

3.0’

90° Spread: 28.1°

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 230 cd max.

45°

Mount

L57 S = semi-recessed F = fully-recessed

97.32

1.0’

2.0’

24.33

1.9’

2.0’

3.0’

10.81

2.9’

3.0’

4.0’

6.08

3.9’

4.0’

5.0’

3.89

4.8’

5.0’

6.0’

2.70

5.8’

6.0’

Wattage -

Beam Width

1.0’

0° Spread: 51.6°

0°

Code

583.60

0° Spread: 29.7°

0°

Beam Width

1.0’

90° Spread: 53.3°

Color

Beam

Accessories*

3 3 = 3 x 1W

Finish -

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

30 = 30° beam 60 = 60° beam

NA = no accessory SH = metal shroud, silver SHB = metal shroud, black

MA = matte clear anodized BA = black anodized BN = brushed nickel

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

90 91

Image shows L58R-2W30S120-MA

L58

www.mplighting.com

Shown as round cover (R)

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 2.5W, 700mA LED

integral friction fit spring for easy mounting

Driver Remote 120V primary, 700mA driver (not included). LED Input Voltage 4V DC

Ø2-1/2” Ø64mm

1/8” 3mm

1/2” 13mm

Cabinet Fixtures

L58 2.5W Recessed Puck Light

Power Consumption 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø3” Ø76mm

Weight 0.074lbs (0.034kg).

Shown as square cover (S)

Material Anodized aluminum. RoHS compliant. Mounting Recessed mount to millwork with friction fit spring clip. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm). Cutout Size Ø2-1/2” (Ø64mm) Approval Dry locations. Approved to US and Canadian standards by CSA.

integral friction fit spring for easy mounting 1/8” 3mm

Ø2-1/2” Ø64mm

1/2” 13mm

See page 192 for explanation of symbols and IP ratings. 3” Sq. 76mm Sq.

L58 120° 3000K Std 116 lm Lumen test results provided by MP Lighting integrating sphere (see page 194).

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 60 cd max.

45°

Code

Cover

L58

Wattage -

R = round cover S = square cover

242.86

1.1’

1.2’

1.0’

60.72

2.3’

2.5’

1.5’

26.98

3.4’

3.7’

2.0’

15.18

4.5’

4.9’

2.5’

9.71

5.7’

6.2’

3.0’

6.75

6.8’

7.4’

0° Spread: 97.0°

0°

Color

2 2 = 2.5W

Beam Width

0.5’

90° Spread: 102.1°

Beam 120

W30S = 3000K, std CRI W20H = 2000K, high CRI

120 = 120° beam

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

92 93

Image shows L59R-4W30S120-MA

L59

www.mplighting.com

Shown as round cover (R)

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 3.7W, 350mA LED

integral friction fit spring for easy mounting

Driver Remote 120V primary, 350mA driver (not included). LED Input Voltage 10V DC

Ø2-1/2” Ø64mm

1/8” 3mm

1/2” 13mm

Cabinet Fixtures

L59 3.7W Recessed Puck Light

Power Consumption 4W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

Ø3” Ø76mm

Weight 0.074lbs (0.034kg).

Shown as square cover (S)

integral friction fit spring for easy mounting 1/8” 3mm

Ø2-1/2” Ø64mm

1/2” 13mm

See page 192 for explanation of symbols and IP ratings. 3” Sq. 76mm Sq.

L59 120° 3000K Std 240 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 90 cd max.

45°

Cover

L59

R = round cover S = square cover

Beam Width

0.5’

362.00

1.1’

1.2’

1.0’

90.50

2.3’

1.5’

40.22

3.4’

2.0’

22.62

4.5’

4.6’

2.5’

14.48

5.7’

3.0’

10.06

6.8’

6.9’

0° Spread: 97.2°

0°

Code

Center Beam FC

90°

90° Spread: 97.6°

Wattage

Color

Beam

W30S

120

4 = 3.7W

W30S = 3000K, std CRI

120 = 120° beam

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82.

94 95

Image shows L62-3W30S120-MA

L62

www.mplighting.com

Cabinet Fixtures

L62 3.2W Recessed Puck Light Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 3.2W, 350mA LED Driver Remote 120V primary, 350mA driver (not included). LED Input Voltage 9.3V DC Power Consumption 4W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Weight 0.072lbs (0.032kg).

integral friction fit spring for easy mounting

Material Anodized aluminum. RoHS compliant. Mounting Recessed mount to millwork with friction fit spring clip. Comes with 6’ (1829mm) wire lead. Optimal spacing is 18” - 24” (457mm - 610mm).

1/8” 3mm

Ø2-1/2” Ø64mm

1/2” 13mm

Cutout Size Ø2-1/2” (Ø64mm) Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø3” Ø76mm

20 See page 192 for explanation of symbols and IP ratings.

L62 120° 3000K Std 154 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by MP Lighting integrating sphere (see page 194).

-45°

approx. 100 cd max.

45°

L62

418.67

1.5’

1.6’

1.0’

104.67

3.1’

3.2’

1.5’

46.67

4.6’

4.8’

2.0’

26.17

6.1’

6.3’

2.5’

16.75

7.7’

7.9’

3.0’

11.63

9.2’

9.5’

Wattage

Color

Beam

W30S

120

3 = 3.2W

W30S = 3000K, std CRI

Beam Width

0.5’

0° Spread: 113.9°

0°

Code

Center Beam FC

90°

120 = 120° beam

90° Spread: 115.5°

Finish MA = matte clear anodized S3 = stainless steel 303

NOTE: Standard CRI has a value of 75~82.

96 97

Image shows L64-2W30S120NA-MA

L64

www.mplighting.com

Shown as 12° & 30° beam

Cabinet Fixtures

L64 2.5W Surface Mount Puck Light 1-3/4” 45mm

Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 2.5W, 700mA LED

Shown as 12° beam with half shroud (HS).

Driver Remote 120V or 277V primary, 700mA driver (not included). Ø3” Ø76mm

LED Input Voltage 4V DC

7/8” 22mm

Power Consumption 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1-1/4” 32mm

Ø1” Ø26mm

Ø7/8” Ø22mm

3/8” 10mm

Weight 0.17lbs (0.079kg). Material Anodized aluminum. RoHS compliant. 1-3/4” 45mm

Mounting Surface mount to cabinet millwork. Comes with 6’ (1829mm) wire lead.

Approval Dry locations. Approved to US and Canadian standards by CSA. Shown as 120° beam

Ø3” Ø76mm

1/2” 13mm

See page 192 for explanation of symbols and IP ratings.

1” 26mm

1/2” 13mm

L64 120°, NA 3000K Std 190 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

-45°

Code -

Center Beam FC

90°

approx. 75 cd max.

45°

0°

L64

Ø1” Ø26mm

Color

W30S

2 = 2.5W

72.45

2.3’

2.0’

18.11

4.6’

4.5’

3.0’

8.05

6.8’

4.0’

4.53

9.1’

9.0’

5.0’

2.90

6.0’

2.01

0° Spread: 97.4°

Wattage

W30S = 3000K, std CRI

Beam Width

1.0’

11.4’ 11.3’ 13.7’ 13.5’ 90° Spread: 96.8°

Beam

Accessories

Finish -

12 = 12° beam 30 = 30° beam 120 = 120° beam

NA = no accessory HS = half shroud FS = full shroud

MA = matte clear anodized WH = white BA = black anodized

NOTE: Standard CRI has a value of 75~82.

98 99

Image shows L65-2W30S12NA-MA

L65

www.mplighting.com

Shown as 12° & 30° beam

Cabinet Fixtures

L65 2.5W Recessed Mount Puck Light Application Showcases, kitchen cabinets, restaurant millwork, or wine cellars. Source 2.5W, 700mA LED

integral friction fit spring for easy mounting

Driver Remote 120V or 277V primary, 700mA driver (not included).

Ø2-3/8” Ø60mm

7/8” 22mm

LED Input Voltage 4V DC

Shown as 12° beam with half shroud (HS).

1/2” 13mm

Power Consumption 3W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1-1/4” 32mm

1” 26mm

Ø3” Ø76mm

Ø7/8” Ø22mm

3/8” 10mm

Weight 0.28lbs (0.125kg). Material Anodized aluminum. RoHS compliant. Mounting Recessed mount to cabinet millwork. Comes with 6’ (1829mm) wire lead.

Cutout Size Ø2-1/2” (Ø64mm) Shown as 120° beam

Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø2-3/8” Ø60mm

integral friction fit spring for easy mounting 1/2” 13mm

40 See page 192 for explanation of symbols and IP ratings.

1/2” 13mm

Ø3” Ø76mm

L65 30°, HS 3000K Std 190 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Lumen test results provided by LED chip manufacturer.

-45°

Code -

Center Beam FC

90°

approx. 600 cd max.

45°

Wattage

Color

W30S

2 = 2.5W

W30S = 3000K, std CRI

Beam Width

1.0’

596.88

0.5’

2.0’

149.22

1.0’

3.0’

66.32

1.4’

1.5’

4.0’

37.30

1.9’

2.0’

5.0’

23.88

2.4’

2.5’

6.0’

16.58

2.9’

3.0’

0° Spread: 26.9°

0°

L65

Ø1” Ø26mm

90° Spread: 27.7°

Beam

Accessories

Finish -

12 = 12° beam 30 = 30° beam 120 = 120° beam

NA = no accessory HS = half shroud FS = full shroud

MA = matte clear anodized WH = white BA = black anodized

NOTE: Standard CRI has a value of 75~82.

100 101

Image shows L723CT-W30SF2D-1MA

L72

www.mplighting.com

Application Indoor directional light for wall, picture, or signage illumination. Source 12 x 1W, 350mA LEDs Driver Remote 120V primary, 700mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 17W Dimming Dimming available. Please consult factory. See page 186-190 for Recommended Driver Chart. Weight 0.925lbs (0.42kg). Material Anodized aluminum. RoHS compliant.

Ø2-3/8” Ø60mm

1/4” 6mm

Canopy Mount & Rail Systems

L72 12W Spotlight

stem

Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting SR, DC, and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware.

5-3/4” 146mm max. 4-1/8” 105mm

Approval Dry locations. Approved to US and Canadian standards by CSA. 5-1/8” 130mm

Shown as DC rail mount (dual circuit). See page 193 for mounting options.

See page 192 for explanation of symbols and IP ratings.

L72 30° 3000K Std 641 lm Lumen test results provided by MP Lighting integrating sphere (see page 194).

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 2700 cd max.

45°

Code

Mount

L72

1,248.89

0.8’

3.0’

312.22

1.7’

4.5’

138.77

2.5’

6.0’

78.06

3.3’

7.5’

49.96

4.2’

9.0’

34.69

5.0’

0° Spread: 31.0°

0°

Beam Width

1.5’

Color

90° Spread: 31.0°

Beam

Input Voltage

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail SF = single rail flush wall 3CT = 3 circuit track (silver adaptor finish)

Stem -

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

1A = 12V AC 2D = 24V DC

Fixture Finish MA

1 = 1” (25mm) X = custom length

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

102 103

Image shows L73DC-W30SF2D-1MA

L73

www.mplighting.com

Canopy Mount & Rail Systems

L73 6W Spotlight Application Indoor directional light for wall, picture, or signage illumination. stem

Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). Please specify. LED Input Voltage 12V AC or 24V DC

6” 152mm max.

Power Consumption 8W Dimming Dimming available. Please consult factory. See page 186-190 for Recommended Driver Chart.

3-7/8” 98mm

3” 76mm

Weight 0.71lbs (0.321kg). Material Anodized aluminum. RoHS compliant.

Shown as SR rail mount (single rail). See page 193 for mounting options.

Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware. Approval Dry locations. Approved to US and Canadian standards by CSA.

20 See page 192 for explanation of symbols and IP ratings.

L73 30° 3000K Std 334 lm Lumen test results provided by MP Lighting integrating sphere (see page 194).

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 1400 cd max.

45°

0°

Code

Center Beam FC

90°

Mount

Beam Width

1.5’

620.28

0.8’

3.0’

155.07

1.7’

4.5’

68.92

2.5’

6.0’

38.77

3.4’

3.3’

7.5’

24.81

4.2’

9.0’

17.23

5.1’

5.0’

0° Spread: 31.4°

90° Spread: 31.2°

Track type (1Ct only)

L73

Color

Beam

Input Voltage

L = Lightolier H = Halo J = Juno 2 = 2-wire

Stem -

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

1A = 12V AC 2D = 24V DC

Fixture Finish

Adaptor finish (1CT only)

MA 1 = 1” stem (25mm) X = custom length

MA = matte clear anodized

W = white B = black

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

104 105

Image shows L75C3-W30SN-1MA

L75

www.mplighting.com

Application Indoor directional light for wall, picture, or signage illumination.

Ø4-5/8” Ø117mm

Source 4 x 2.5W, 700mA LEDs

3-1/2” 89mm

Driver Remote 120V primary, 700mA driver (not included).

stem

1/4” 6mm

LED Input Voltage 12V DC

5/8” 16mm

Power Consumption 12W Dimming Dimmable with remote 60W 12V dimmable driver and controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart.

4-5/8” 117mm max.

6” 152mm

Weight 0.71lbs (0.321kg). Material Anodized aluminum. RoHS compliant.

3” 76mm

Canopy Mount & Rail Systems

L75 10W Spotlight

Shown as C3 canopy mount. See page 193 for mounting options.

Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 24V MP Lighting DC and SR rail systems as well as the MP Lighting 3-Circuit Track (sold separately). See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware. Approval Dry locations. Approved to US and Canadian standards by CSA.

20 See page 192 for explanation of symbols and IP ratings.

L75 30° 3000K Std 648 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 1800 cd max.

45°

L75 60° 3000K Std 648 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

0.8’

3.0’

198.44

1.7’

4.5’

88.20

2.5’

6.0’

49.61

3.3’

3.4’

7.5’

31.75

4.1’

4.2’

9.0’

22.05

5.0’

5.1’

90° Spread: 31.4°

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 600 cd max.

45°

Mount

L75

Beam Width

1.5’

265.80

1.5’

1.7’

3.0’

66.45

2.9’

3.5’

4.5’

29.53

4.4’

5.2’

6.0’

16.61

5.9’

7.0’

7.5’

10.63

7.3’

8.7’

9.0’

7.38

8.8’

10.5’

0° Spread: 52.1°

0°

Code

793.77

0° Spread: 30.9°

0°

Beam Width

1.5’

Color

90° Spread: 60.4°

Beam

Stem -

W30S = 3000K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

Fixture Finish MA

1 = 1” (25mm) X = custom length

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

106 107

Image shows L76DC-W30SN2D-1MA

L76

www.mplighting.com

Canopy Mount & Rail Systems

L76 6W Spotlight Application Indoor directional light for wall, picture, or signage illumination. Source 6 x 1W, 350mA LEDs stem

Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC

5/8” 16mm

Power Consumption 8W Dimming Dimming available. Please consult factory. See page 186-190 for Recommended Driver Chart.

8” 203mm

Weight 0.57lbs (0.258kg). Material Anodized aluminum. RoHS compliant.

4-5/8” 117mm max.

3” 76mm

Shown as DC rail mount (dual circuit). See page 193 for mounting options.

Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware. Approval Dry locations. Approved to US and Canadian standards by CSA.

20 See page 192 for explanation of symbols and IP ratings.

L76 30° 3000K Std 510 lm

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 1400 cd max.

45°

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

623.81

0.8’

3.0’

155.95

1.7’

4.5’

69.31

2.5’

6.0’

38.99

3.3’

7.5’

24.95

4.2’

9.0’

17.33

5.0’

90° Spread: 31.1°

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 470 cd max.

45°

0°

Code

Beam Width

1.5’

0° Spread: 31.1°

0°

L76 60° 3000K Std 510 lm

Center Beam FC

90°

Mount

Beam Width

1.5’

201.86

1.7’

1.8’

3.0’

50.46

3.3’

3.5’

4.5’

22.43

5.0’

5.3’

6.0’

12.62

6.6’

7.1’

7.5’

8.07

8.3’

8.8’

9.0’

5.61

9.9’

10.6’

0° Spread: 57.8°

90° Spread: 61.0°

Track type (1Ct only)

L76

Color

Beam

Input Voltage

L = Lightolier H = Halo J = Juno 2 = 2-wire

Stem -

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) F = flood (60°)

1A = 12V AC 2D = 24V DC

Fixture Finish

Adaptor finish (1CT only)

MA 1 = 1” stem (25mm) X = custom length

MA = matte clear anodized

W = white B = black

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

108 109

Image shows L221C3-4W30SS2NA-M

L221

www.mplighting.com

Canopy Mount & Rail Systems

Ø4-5/8” Ø117mm

L221 4W / 10W Spotlight

3-1/2” 89mm

Application Indoor directional light for wall, picture, or signage illumination. Source 4 x 1W, 350mA or 4 x 2.5W, 700mA LEDs 1/4” 6mm

Driver Remote 120V primary, 350mA (4W) or 700mA (10W) driver (not included).

stem

LED Input Voltage 12V DC

3-1/4” 83mm

Power Consumption 6W /12W Dimming Dimmable with remote 100W 15V LED driver and controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart.

3-5/8” 92mm

Weight 0.77lbs (0.351kg).

Ø2-1/4” Ø57mm

Shown as C3 canopy mount with no accessory (NA). See page 193 for mounting options.

Material Anodized aluminum. RoHS compliant. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 15V MP Lighting DC and SR rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware and pages 171174 for 3CT hardware. Accessories Multiple accessories can be selected, up to two lenses and a shroud (sold separately). See page 175 for details. Approval Dry locations. Approved to US and Canadian standards by CSA. CAUTION Using a traditional low voltage 12V transformer to power the system will not work and will damage LEDs.

20 See page 192 for explanation of symbols and IP ratings.

L221 4 x 1W, 20° 3000K Std 340 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 1100 cd max.

45°

0°

Code

Center Beam FC

90°

Mount

Beam Width

1.5’

368.97

0.8’

3.0’

92.24

1.5’

1.6’

4.5’

41.00

2.3’

2.4’

6.0’

23.06

3.1’

3.2’

7.5’

14.76

3.9’

4.0’

9.0’

10.25

4.6’

4.8’

0° Spread: 29.0°

Track type (1C only)

L221

90° Spread: 29.8°

Wattage

Color

Beam

Stem

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail 1C = 1 circuit track (4W only) 3CT = 3 circuit track (silver adaptor finish)

L = Lightolier H = Halo J = Juno 2 = 2-wire

Fixture Finish

Access0ries** -

4 = 4W W27S = 2700K, 1 = 10W* std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (20°) N = narrow flood (40°)

2 = 2” (51mm) X = custom length

NA = no accessory BE = beam elongator CS = crystal spreader MS = mistlite spreader ELB = eggcrate louver, black SH = metal shroud SHB = metal shroud, black

Adaptor finish (1c only)

M M = matte clear anodized

W = white B = black

*10W only available in W30S & W20H. **Multiple accessories can be selected. Please specify. NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

110 111

Image shows L222SR-30S2SH2D-M

L222

www.mplighting.com

Canopy Mount & Rail Systems

L222 6W Spotlight Application Indoor directional light for wall, picture, or signage illumination. stem

Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included).

3-1/4” 83mm

LED Input Voltage 12V AC or 24V DC 3-5/8” 92mm

Power Consumption 8W Dimming Dimming available. Please consult factory. See page 186-190 for Recommended Driver Chart.

4-3/8” 110mm

Weight 0.77lbs (0.351kg).

Ø2-1/4” Ø57mm

Shown as SR (single rail) mount with metal shroud (SH) accessory. See page 193 for mounting options.

Material Anodized aluminum. RoHS compliant. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware. Accessories Multiple accessories can be selected, up to two lenses and a shroud (sold separately). See page 175 for details. Approval Dry locations. Approved to US and Canadian standards by CSA.

20 See page 192 for explanation of symbols and IP ratings.

L222 25° 3000K Std 510 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 900 cd max.

45°

0°

Code

Center Beam FC

90°

Mount

Beam Width

1.5’

411.79

0.9’

09’

3.0’

102.95

1.9’

4.5’

45.75

2.8’

6.0’

25.74

3.7’

7.5’

16.47

4.7’

4.6’

9.0’

11.44

5.6’

0° Spread: 34.5°

Track type (1C only)

L222

90° Spread: 34.4°

Color

Stem

Accessories*

L = Lightolier H = Halo J = Juno 2 = 2-wire

Fixture Finish

Input Voltage -

27S = 2700K, std CRI 30S = 3000K, std CRI 35S = 3500K, std CRI 41S = 4100K, std CRI 20H = 2000K, high CRI 30H = 3000K, high CRI

2 = 2” stem (51mm) X = custom length

NA = no accessory BE = beam elongator CS = crystal spreader MS = mistlite spreader ELB = eggcrate louver, black SH = metal shroud SHB = metal shroud, black

1A = 12V AC 2D = 24V DC

Adaptor finish (1c only)

M M = matte clear anodized

W = white B = black

*Multiple accessories can be selected. Please specify. NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

112 113

Image shows L2233CT-W30SN2SHB2D-M

L223

www.mplighting.com

Canopy Mount & Rail Systems

L223 18W Spotlight with Active Cooling System (ACS)1 Application Indoor directional light for wall, picture, or signage illumination. Source 7 x 2.5W, 700mA LEDs Driver Remote 120V primary, 700mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 21W Dimming Dimming available. Please consult factory. See page 186-190 for Recommended Driver Chart. Weight 1lb (0.5kg). Material Anodized aluminum. RoHS compliant. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC, SR and SF rail systems as well as the MP Lighting 3-Circuit Track (sold separately). See pages 160-167 for rail system hardware and pages 171-174 for 3CT hardware.

stem

Accessories Multiple accessories can be selected, up to two lenses and a shroud (sold separately). See page 175 for details.

Ø3” Ø76mm

Approval Dry locations. Approved to US and Canadian standards by CSA. Active Cooling System (ACS) detects temperature changes and control speeds of a cooling fan. Visit www.mplighting.com/support/resource for more info. Patent Application # (US): 12/182,972 Patent Application # (Germany): 11 2009 001 839 Patent Application # (Japan): 2011-520291

4-1/8” 105mm

2-3/4” 70mm

Shown as DC (dual circuit rail) mount with no accessory (NA). See page 193 for mounting options.

20 See page 192 for explanation of symbols and IP ratings.

L223 7 x 2.5W, 25° 3000K Std 1134 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 3800 cd max.

45°

Code

Mount

L223

0.6’

3.0’

419.65

1.2’

4.5’

186.51

2.4’

6.0’

104.91

3.0’

7.5’

67.14

3.0’

9.0’

46.63

3.6’

Color -

1,678.61

0° Spread: 22.6°

0°

Beam Width

1.5’

90° Spread: 22.7°

Beam

Stem

Accessories*

N W27S = 2700K, std CRI N = narrow W30S = 3000K, std CRI flood (25°) W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

2 = 2” stem (51mm) X = custom length

*Multiple accessories can be selected. Please specify. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

Fixture Finish

Input Voltage

NA = no accessory BE = beam elongator CS = crystal spreader MS = mistlite spreader ELB = eggcrate louver, black SH = metal shroud SHB = metal shroud, black

1A = 12V AC 2D = 24V DC

M M = matte clear anodized

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

114 115

Image shows L81CB-1W30SN-C10MC

1/4” 6mm

Ø1-1/2” Ø38mm

1/4” 6mm 2-5/8” 67mm

Ø1-1/2” Ø38mm

J-box (not included)

L81 1W / 2.5W Picture Light

1” 25mm

Application Indoor picture or millwork illumination. Source 1W, 350mA or 2.5W, 700mA LED

Surface level

Driver Remote 120V or 277V primary, 350mA (1W) or 700mA (2.5W) driver (not included).

Power Consumption 1.5W / 3W

Material Plated brass. RoHS compliant. Mounting Ceiling or wall mount to custom 2” x 2” octagonal box (CB) (included) or retrofit to existing standard octagonal box using custom mounting plate (MP) (included).

3-1/4” 83mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø2-3/8” Ø60mm

Polar Candela Distribution

10” 254mm

180°

Center Beam FC

90°

45°

2,632.25

0.2’

0.7’

658.06

0.3’

1.0’

292.47

0.5’

1.3’

164.52

0.6’

0.7’

1.7’

105.29

0.8’

2.0’

73.12

0.9’

1.0’

0° Spread: 25.5°

Polar Candela Distribution

Beam Width

0.3’

5/8” 16mm

10” 254mm

90° Spread: 27.5°

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

45°

approx. 550 cd max.

5,017

0.2’

0.7’

1,254

0.3’

1.0’

557.42

0.5’

1.3’

313.55

0.6’

0.7’

1.7’

200.67

0.8’

2.0’

139.35

0.9’

1.0’

0° Spread: 25.5°

Mount

L81

Beam Width

0.3’

0°

Code

Surface level

3-1/4” 83mm

Illuminance at a Distance

0°

Lumen test results provided by LED chip manufacturer.

Ø1-1/2” 5/8” Ø38mm 16mm

3-1/4” 83mm Shown as MP mount, 120° beam, C10” (254mm) curved stem. 5/8” See page 193 for mounting options. 16mm

See page 192 for explanation of symbols and IP ratings.

approx. 300 cd max.

Ø38mm

1/4” 6mm

Ø2-3/8” Ø2-3/8” Ø60mm Ø60mm

-45°

1” 25mm Ø1-1/2”

Stem Ø2-3/8” Shown as CB mount, 12° or 30° beam, S5” (127mm) straight stem. Ø60mmJ-box See page 193 for mounting options. (not included) Ø1-1/2” 1/4” Ø38mm 6mm

Weight 0.86lbs (0.392kg) with S5 straight stem.

-90°

1” 25mm

1/4” 1-3/8” 6mm 35mm Stem

Ø2-3/8” Ø60mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

L81 2.5W, 30° 3000K Std 162 lm

Stem 2-5/8” 67mm 1-3/8” 35mm 2-5/8” 67mm

LED Input Voltage 4V DC

L81 1W, 30° 3000K Std 85 lm

1” 25mm Ø1-1/2” Ø38mm

1/4” 1-3/8” 6mm 35mm

Picture Lights

Ø2-3/8” 1” Ø60mm 25mm

L81

www.mplighting.com

Wattage

90° Spread: 27.5°

Color

Beam

CB = custom octagonal box MP = retrofit mounting plate

Stem

Finish

1 = 1W 2 = 2.5W*

W27S = 2700K, std CRI W30S = 3000K, std CRI W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

S = spot (12°) N = narrow flood (30°) W = wide flood (120°)

S5 = 5” (127mm) straight stem S10 = 10” (254mm) straight stem SX = custom straight stem C10 = 10” (254mm) curved stem CX = custom curved stem

MC = matte chrome BN = brushed nickel

*Only available in W30S & W20H. NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

116 117

Image shows L85W2CB-W30S-C10MA

3/8” 10mm 2-5/8” 67mm J-box (not included)

3/8” 10mm

Application Indoor picture or millwork illumination.

2-3/8” Stem 60mm

2-3/8” Sq. Surface 60mm Sq. level

Source 3.5W, 350mA LED

1-1/8” 29mm

2” 51mm

Picture Lights

L85 3.5W Picture Light

2-5/8” 67mm 1/2” 13mm

2-3/8” 60mm

2-3/8” Sq. 60mm Sq. 1-3/4” 44mm

L85

www.mplighting.com

1/2” 13mm

1-1/8” 29mm

Driver Remote 120V primary, 350mA driver (not included). LED Input Voltage 12V DC

3/8”Stem 10mm

Power Consumption 4W

2-5/8” Shown as W2CB mount with 6” (152mm) straight stem. 67mm 10-1/8” See page 193 for mounting options. 257mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

J-box (not included)

Weight 0.71lbs (0.322kg) with S6 stem.

3/8” 10mm

Material Anodized aluminum. RoHS compliant. Mounting Wall mount. W1CB & W2CB mount to custom 2” x 2” octagonal box (included). W1MP & W2MP retrofit to existing standard octagonal box using custom mounting plate (included). W3 mounts to standard octagonal box (not included). Approval Dry locations. Approved to US and Canadian standards by CSA.

3-1/4” 83mm 1-3/4” 44mm

2-3/8” Sq. 60mm Sq. 3-1/4” 83mm

2-5/8” 67mm 1/2” 13mm

2” 51mm

Surface level

9-5/8” 244mm

Shown as W2MP mount with 10” (254mm) curved stem. See page 193 for mounting options. 9-5/8” 244mm 2-3/8” Sq. 60mm Sq.

40 See page 192 for explanation of symbols and IP ratings.

1/2” 13mm

7-3/4” 197mm

L85 3000K Std 250 lm

Polar Candela Distribution 180° -90°

Lumen test results provided by LED chip manufacturer.

6-7/8” 175mm

Illuminance at a Distance

Center Beam FC

90°

-45°

approx. 55 cd max.

45°

498.79

0.4’

0.9’

0.7’

124.70

0.8’

1.8’

1.0’

55.42

1.3’

2.7’

1.3’

31.17

1.7’

3.6’

1.7’

19.95

2.1’

4.5’

2.0’

13.86

2.5’

5.4’

0° Spread: 65°

0°

Beam Width

0.3’

standard vertical stem length

1/2” 13mm

2-5/8” 67mm

1-1/8” 29mm

Ø2” Ø51m

slot for hook 3/4” 19mm picture frame

90° Spread: 107.4°

Shown as wall hook WK...S6, 6” (152mm) straight stem. See page 193 for mounting options.

Code

Mount

L85

Color -

W1CB = Ø2-3/8” x 1/4” canopy w/ custom octagonal box W1MP = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate W2CB = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box W2MP = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate W3 = Ø4-5/8” x 1/4” canopy WK = wall hook

Horizontal Stem

Finish

W30S = 3000K, std CRI W50S = 5000K, std CRI

S6 = 6” (152mm) straight stem SX = custom straight stem C10 = 10” (254mm) curved stem CX = custom curved stem

MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82.

118 119

Image shows L202WK-6W30SF-23MA

L202

www.mplighting.com

22-7/8” 581mm

L202 6W Picture Light Application Picture or millwork illumination.

90°

Source 6 x 1W, 350mA LEDs

12-1/4” 311mm

Driver Remote 120V primary, 350mA or 24V DC driver (not included). Can also be hard-wired.

3” 76mm

R14-1/8” R359mm

LED Input Voltage 24V DC

slot for hook

Power Consumption 8W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

Ø2” 51mm

3/4” 19mm

Ø2” Ø51mm

Picture Lights

3-7/8” 98mm

picture frame

Weight 3.71lbs (1.68kg). Material Anodized aluminum. RoHS compliant. Mounting Wall mount. W1CB & W2CB mount to custom 2” x 2” octagonal box (included). W1MP & W2MP retrofit to existing standard octagonal box using custom mounting plate (included). W3 mounts to standard octagonal box (not included).

Shown as wall hook (WK). See page 193 for mounting options.

stem

Approval Dry locations. Approved to US and Canadian standards by CSA. Ø2-3/8” Ø60mm

1/4” 6mm

See page 192 for explanation of symbols and IP ratings.

Shown as W1CB mount. See page 193 for mounting options.

L202 60° 3000K Std 510 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 470 cd max.

45°

Code

Mount

L202

1.8’

1.7’

3.0’

50.45

3.5’

3.3’

4.5’

22.42

5.3’

5.0’

6.0’

12.61

7.1’

6.6’

7.5’

8.07

8.8’

8.3’

9.0’

5.61

10.6’

10.0’

90° Spread: 57.9°

Wattage -

201.81

0° Spread: 60.9°

0°

Beam Width

1.5’

Color

6 6 = 6 x 1W

Beam F

W30S = 3000K, std CRI W20H = 2000K, high CRI

F = flood (60°)

Stem -

Finish MA

23 = 23” (584mm) X = custom stem

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

120 121

Image shows L96DC-W30SN2D-S6M

L96

www.mplighting.com

Pendants

L96 6W Pendant Application Indoor pendant downlight illumination. Source 6 x 1W, 350mA LEDs stem/ cord

Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 8W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart.

6-3/8” 162mm

Weight 1.81lbs (0.821kg). Material Anodized aluminum. RoHS compliant. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC and SR rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware.

Ø3” Ø76mm

Shown as DC rail mount (dual circuit). See page 193 for mounting options.

Approval Dry locations. Approved to US and Canadian standards by CSA.

See page 192 for explanation of symbols.

L96 25° 3000K Std 510 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

-45°

approx. 2200 cd max.

45°

0°

Code

Center Beam FC

90°

Mount

Beam Width

1.5’

965.19

0.5’

3.0’

241.30

1.1’

4.5’

107.24

1.6’

6.0’

60.32

2.2’

7.5’

38.61

2.7’

9.0’

26.81

3.3’

0° Spread: 20.5°

Track type (1Ct only)

L96

90° Spread: 20.7°

Color -

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail 1C = 1 circuit track 3CT = 3 circuit track (silver adaptor finish)

L = Lightolier H = Halo J = Juno 2 = 2-wire

Beam

Input Voltage

N W27S = 2700K, std CRI N = narrow W30S = 3000K, std CRI flood W35S = 3500K, std CRI (25°) W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

Stem/Cord

Fixture Finish

Adaptor finish (1CT only)

1A = 12V AC 2D = 24V DC

S6 = 6” (152mm) M = matte clear stem anodized SX = custom stem B = black C72 = 72” (1829mm) anodized coaxial cord CX = custom cord

W = white B = black

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

122 123

Image shows L191C1C-4W30S-C72MA

L191

www.mplighting.com

Ø2-3/8” Ø60mm

1-3/4” 44mm

Pendants

1/4” 6mm

L191 LED Pendant Application Indoor pendant. Source 0.07W, 700mA LEDs

stem/ cord

Driver Remote 120V primary, 700mA driver (not included). LED Input Voltage 24V DC Power Consumption 2’ = 9W 4’ = 17W Dimming 0~10V dimming with remote dimmable driver (not included). See page 186190 for Recommended Driver Chart. Length

Weight 0.925lbs (0.42kg). Material PMMA. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Approval Dry locations. Approved to US and Canadian standards by CSA. CAUTION Using a traditional low voltage 12V transformer to power the system will not work and will damage LEDs.

Ø2” Ø51mm

Shown as C1C mount. See page 193 for mounting options.

See page 192 for explanation of symbols.

L191 2’ Length 3000K Std 1472 lm

Lumen test results provided by LED chip manufacturer.

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 220 cd max.

45°

Code

Mount

L191

1.54

1.7’

3.0’

0.38

3.4’

9.6’

4.5’

0.17

5.0’

14.4’

6.0’

0.10

6.7’

19.2’

7.5’

0.06

8.3’

23.9’

9.0’

0.04

10.0’

28.7’

0° Spread: 58.0°

0°

Beam Width

1.5’

Length

4.8’

90° Spread: 115.9°

Color

Stem/Cord

Canopy Finish

2 = 2’ (320 LEDs) 4 = 4’ (640 LEDs)

W27S = 2700K, std CRI W30S = 3000K, std CRI

MA S6 = 6” (152mm) stem SX = custom stem C72 = 72” (1829mm) cord CX = custom cord

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82.

124 125

Image shows G02LC9-6W30SLC72-MC

G02L

www.mplighting.com

Ø4-13/16” Ø122mm

Pendants

11/16” 18mm

G02L 6W Glass Pendant

11/16” 18mm

Application Indoor pendant. Glass Cylinder shaped opalescent cased hand blown glass.

stem/cord

Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA constant current or 24V DC constant voltage (C9 canopy / 3CT) driver (not included). LED Input Voltage 24V DC Power Consumption 8W

13-3/4” 349mm

Dimming Canopy mount only. Dimmable with remote 24V constant voltage driver and dimming controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart.

21-5/8” 549mm

Mounting Material Anodized aluminum. Mounting C9 canopy mounts to standard octagonal box (not included). Can also mount to MP Lighting 3-Circuit Track system (sold separately). See pages 171-174 for 3CT hardware. Field adjustable 72” (1829mm) Ø1/4” (Ø6mm) clear cord. Or 6” (152mm) rigid stem. Longer lengths available, please specify.

6-1/2” 165mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø4-3/4” Ø121mm

Ø2-1/8” Ø54mm

See page 192 for explanation of symbols.

Shown as C9 canopy mount. See page 193 for mounting options.

G02L 3000K Std 510 lm

Polar Candela Distribution

-90°

Lumen test results provided by LED chip manufacturer.

Illuminance at a Distance

180°

Center Beam FC

90°

-45°

approx. 190 cd max.

45°

186.83

0.3’

2.0’

46.71

0.5’

3.0’

20.76

0.8’

4.0’

11.68

1.0’

5.0’

7.47

1.3’

6.0’

5.19

1.6’

1.5’

0° Spread: 14.8°

0°

Beam Width

1.0’

90° Spread: 14.6°

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code G02L

RW %: 70 50 30 0 70 50 RCR: 0 .29 .29 .29 .29 .27 .27 1 .25 .24 .22 .21 .23 .22 2 .23Mount .20 .18 .16 .21 .18 3 .20 .17 .15 .13 .19 .16 4 .19 .15 .13 .11 .17 .14 5 .17 .14 .11 .10 .16 .13 6 .16 .12 .10 .08 .15 .12 7 .15 .11 .09 .07 .14 .11 C9 = Ø4-13/16” 11/16” 8 .14 .10 x.08 .07 canopy .13 .10 9 .13 .10 .08 .06 .12 .09 3CT = 3-circuit track 10 .12adaptor .09 .07finish) .06 .11 .08 (silver

50 30 .27 .20 .17 .14 .12 .11 .09 .08 .08 .07 .07

0 50 30 .14 .23 .23 .10 .18 .17 .08 .15 .14 Wattage .06 .13 .12 .05 .12 .10 .05 6 .11 .09 .04 .10 .08 .04 .09 .07 6.04= 6.08x 1W .07 .03 .08 .06 .03 .07 .06

20 50 30 20 50 30 20 .23 .19 .19 .19 .16 .16 .16 .16 .15 .14 .14 .12 .12 .11 .13 .13 .12 Color .11 .10 .09 .09 .10 .11 .10 .09 .09 .08 .07 .09 .10 .09 .07 .08 .07 .06 .08 .09 .08 .06 .07 .06 .05 .07 .08 .07 .06 .07 .06 .05 .06 .08 .06 .05 .06 .05 .04 W27S = std .05 CRI .04 .06 .07 .062700K, .05 .06 .05 .07 .053000K, .04 .05 W30S = std .04 CRI .04 .05 .06 .05 .04 .05 .04 .04

W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

0 0 .14 .10 .07 .06 .05 .04 .04 .04 L= .03 .03 .03

Glass Size

Stem/Cord

L 21-5/8”H (549mm)

Mounting Finish -

S6 = 6” (152mm) stem SX = custom stem C72 = 72” (1829mm) cord CX = custom cord

MC = matte chrome BA = black anodized BN = brushed nickel

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

126 127

Image shows G03LC9-6W30SLC72-MC

G03L

www.mplighting.com

Ø4-13/16” Ø122mm

11/16” 18mm

Application Indoor pendant.

Pendants

G03L 6W Glass Pendant

11/16” 18mm stem/cord

Glass Open top and bottom, cylinder shaped hand blown opalescent cased glass. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA constant current or 24V DC constant voltage (C9 canopy / 3CT) driver (not included). LED Input Voltage 24V DC Power Consumption 8W 15-3/4” 400mm

Dimming Canopy mount only. Dimmable with remote 24V constant voltage driver and dimming controller, 0~10V dimming (not included). See page 186-190 for Recommended Driver Chart.

23-5/8” 600mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Ø2-1/8” Ø54mm

See page 192 for explanation of symbols.

Ø3-15/16” Ø100mm

Shown as C9 canopy mount. See page 193 for mounting options.

G03L 3000K Std 510 lm

Polar Candela Distribution

-90°

Lumen test results provided by LED chip manufacturer.

Illuminance at a Distance

180°

Center Beam FC

90°

-45°

approx. 190 cd max.

45°

183.64

0.2’

2.0’

45.91

0.4’

0.5’

3.0’

20.40

0.7’

4.0’

11.48

0.9’

1.0’

5.0’

7.35

1.1’

1.2’

6.0’

5.10

1.3’

1.5’

0° Spread: 12.5°

0°

Beam Width

1.0’

90° Spread: 14.1°

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code G03L

RW %: 70 50 30 0 70 50 RCR: 0 .55 .55 .55 .55 .51 .51 1 .47 .44 .41 .38 .43 .41 2 .42Mount .37 .33 .30 .39 .34 3 .38 .32 .27 .24 .35 .29 4 .35 .28 .23 .20 .31 .26 5 .32 .25 .20 .17 .29 .23 6 .29 .22 .18 .14 .27 .20 7 .27 .20 .16 .12 .25 .18 C9 = Ø4-13/16” 11/16” 8 .25 .18 x.14 .11 canopy .23 .17 9 .23 .17 .13 .10 .21 .15 3CT = 3-circuit track 10 .22adaptor .15 .11finish) .09 .20 .14 (silver

50 30 .51 .38 .30 .25 .21 .19 .16 .14 .13 .12 .11

0 50 30 .27 .43 .43 .18 .34 .32 .13 .28 .26 Wattage .10 .24 .21 .09 .21 .18 .07 6 .19 .16 .06 .17 .14 .06 .15 .12 6.05= 6.14x 1W .11 .05 .13 .10 .04 .12 .09

20 50 30 20 50 30 20 .43 .36 .36 .36 .30 .30 .30 .30 .28 .26 .25 .22 .21 .20 .23 .23 .21 Color .19 .18 .16 .15 .18 .20 .17 .15 .15 .14 .12 .15 .17 .15 .13 .14 .12 .10 .13 .15 .13 .11 .12 .10 .08 .11 .14 .11 .09 .11 .09 .07 .10 .13 .10 .08 .10 .08 .06 W27S = std .07 CRI .06 .09 .12 .092700K, .07 .09 .08 .11 .083000K, .07 .09 W30S = std .07 CRI .05 .07 .10 .08 .06 .08 .06 .05

W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

0 0 .27 .17 .13 .10 .08 .07 .06 .05 L= .05 .04 .04

Glass Size

Stem/Cord

L 23-5/8”H (600mm)

Mounting Finish -

S6 = 6” (152mm) stem SX = custom stem C72 = 72” (1829mm) cord CX = custom cord

MC = matte chrome BA = black anodized BN = brushed nickel

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

128 129

Image shows P71LSR-WHW30S2D-M

P71L

www.mplighting.com

Pendants

P71L 6W Glass Pendant Application Indoor pendant. Glass Open top and bottom, cylinder shaped hand blown opalescent cased glass. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 8W

17-7/8” 454mm

Dimming Please consult factory. Mounting Material Anodized aluminum. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC and SR rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware.

Ø4-3/4” Ø121mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Shown as single rail mount. See page 193 for mounting options.

See page 192 for explanation of symbols.

P71L 3000K Std 510 lm

Polar Candela Distribution

Center Beam FC -90°

Lumen test results provided by LED chip manufacturer.

Illuminance at a Distance

180° 90°

-45°

approx. 190 cd max.

45°

0°

Code

Mount

Beam Width

1.0’

195.3

0.5’

2.0’

48.8

1.0’

3.0’

21.7

1.5’

4.0’

12.2

2.0’

1.9’

5.0’

7.8

2.5’

2.4’

6.0’

5.4

3.0’

2.9’

0° Spread: 27.9°

Track type (1Ct only)

P71L

90° Spread: 27.3°

Shade

Color

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail 1CT = 1 circuit track 3CT = 3 circuit track (silver adaptor finish)

L = Lightolier H = Halo J = Juno 2 = 2-wire

Mounting Finish

Input Voltage

Adaptor finish (1CT only)

SP = black stripe pattern WH = white opalescent

W27S = 2700K, std CRI 1A = 12V AC W30S = 3000K, std CRI 2D = 24V DC W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

M = matte clear W = white B = black anodized B = black anodized

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

Standard 72" coaxial cable, field adjustable. Longer custom length available.

130 131

Image shows P81LDC-WHW30S2D-M

P81L

www.mplighting.com

Pendants

P81L 6W Glass Pendant Application Indoor pendant. Glass Open top and bottom, cylinder shaped hand blown opalescent cased glass. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 8W Dimming Please consult factory.

11-1/8” 283mm

Mounting Material Anodized aluminum. Mounting C1C & C2C mount to custom 2” x 2” octagonal box (included). C1M & C2M retrofit to existing standard octagonal box using custom mounting plate (included). C3 & C4 mount to standard octagonal box (not included). Can mount to 12V AC or 24V DC MP Lighting DC and SR rail systems as well as the MP Lighting 3-Circuit Track (sold separately). Also available with 1-Circuit Track adaptor. See pages 160-167 for rail system hardware.

Ø3” Ø76mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Shown as dual circuit rail mount. See page 193 for mounting options.

See page 192 for explanation of symbols.

P81L 3000K Std 510 lm

Polar Candela Distribution

Center Beam FC -90°

Lumen test results provided by LED chip manufacturer.

Illuminance at a Distance

180° 90°

-45°

approx. 190 cd max.

45°

0°

Code

Mount

185.2

0.5’

2.0’

46.3

0.9’

1.0’

3.0’

20.6

1.4’

1.5’

4.0’

11.6

1.9’

2.0’

5.0’

7.4

2.4’

2.5’

6.0’

5.2

2.8’

2.9’

0° Spread: 26.5°

Track type (1Ct only)

P81L L = Lightolier H = Halo J = Juno 2 = 2-wire

90° Spread: 27.6°

Shade -

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail 1CT = 1 circuit track 3CT = 3 circuit track (silver adaptor finish)

Beam Width

1.0’

Color

WH WH = white opalescent

Mounting Finish

Input Voltage

Adaptor finish (1CT only)

W27S = 2700K, std CRI 1A = 12V AC W30S = 3000K, std CRI 2D = 24V DC W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

M = matte clear W = white B = black anodized B = black anodized

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

Standard 72" coaxial cable, field adjustable. Longer custom length available.

132 133

Image shows P82LSR-ABW30S2D-M

P82L

www.mplighting.com

Pendants

P82L 6W Glass Pendant Application Indoor pendant. Glass Open top and bottom, cylinder shaped alabaster. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, 350mA 12V AC or 24V DC driver (not included). LED Input Voltage 12V AC or 24V DC Power Consumption 8W Dimming Please consult factory.

11” 279mm

Ø3-5/8” Ø92mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

Shown as single rail mount. See page 193 for mounting options.

See page 192 for explanation of symbols.

P82L 3000K Std 510 lm

Polar Candela Distribution

Center Beam FC -90°

Lumen test results provided by LED chip manufacturer.

Illuminance at a Distance

180° 90°

-45°

approx. 190 cd max.

45°

0°

Code

Mount

185.2

0.5’

2.0’

46.3

0.9’

1.0’

3.0’

20.6

1.4’

1.5’

4.0’

11.6

1.9’

2.0’

5.0’

7.4

2.4’

2.5’

6.0’

5.2

2.8’

2.9’

0° Spread: 26.5°

Track type (1Ct only)

P82L L = Lightolier H = Halo J = Juno 2 = 2-wire

90° Spread: 27.6°

Shade -

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate C2C = 2-5/8” Sq. x 3/8” canopy w/ custom octagonal box C2M = 2-5/8” Sq. x 3/8” canopy w/ retrofit mounting plate C3 = Ø4-5/8” x 1/4” canopy C4 = 4-5/8” Sq. x 1/4” canopy DC = dual circuit SR = single rail 1CT = 1 circuit track 3CT = 3 circuit track (silver adaptor finish)

Beam Width

1.0’

Color

AB AB = alabaster

Mounting Finish

Input Voltage

Adaptor finish (1CT only)

W27S = 2700K, std CRI 1A = 12V AC W30S = 3000K, std CRI 2D = 24V DC W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

M = matte clear W = white B = black anodized B = black anodized

NOTE: 1-Circuit track by others.

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

Standard 72" coaxial cable, field adjustable. Longer custom length available.

134 135

Image shows L102N-XS3W20HWT-MA

L101

www.mplighting.com

Linear Systems

L101 Linear Strip Light Application Indoor linear cove, wall slot, shelf, and cabinet illumination. Source 1W, 350mA LEDs (4W/Ft or 6W/Ft) Input Current S2 = 350mA/foot. S3 = 230mA/foot. Driver Remote 120V primary, constant voltage driver (not included). LED Input Voltage 24V DC S (LED spacing)

Power Consumption S2 = 8W/foot S3 = 6W/foot Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1-1/4” 32mm

Weight 0.56lb (0.25kg)/foot.

1/8” 3mm

Material Aluminum and polycarbonate. RoHS compliant.

End feed only.

L (circuit board length)

Mounting Surface mount. Includes aluminum mounting channel with wiring compartment. Comes with 3’ (914mm) wire lead. 0°

Approval Dry locations. Approved to US and Canadian standards by CSA. 1” 25mm

45 .

1-3/8” 35mm

50 See page 192 for explanation of symbols and IP ratings. Shown with 45° angle mount, Flat lens

L101 4’ Length S2 Spacing 120° Flat Frosted 3000K Std 1000 lm

Polar Candela Distribution

Convex clear lens

Illuminance at a Distance

180°

4.8’

45 .

4.4’

42.42

9.5’

8.9’

4.5’

18.86

14.3’

13.3’

6.0’

10.61

19.0’

17.7’

7.5’

6.79

23.8’

22.1’

9.0’

4.71

28.5’

26.6’

1-3/8” 1.5’ 1-3/8” 35mm 3.0’ 35mm -45°

approx. 380 cd max.

45°

L101 4’ Length S3 Spacing 120° Flat Frosted 3000K Std 782 lm

Polar Candela Coefficients OfDistribution Utilization

-90° RW %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

70 .64 .58 .53 .48 .44 .41 .38 .35 .32 .30 .28

1” 25mm

1-1/4” 32mm

Shown with no angle mount, Flat lens

1-1/4” 32mm

Convex clear lens

90° Spread: 111.7°

’

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

169.70

0° Spread: 115.5°

0°

Beam Width

0°

Center Beam FC

90°

45 .

-90°

50 30 .64 .64 .56 .54 .49 .45 .43 .38 .38 .33 .34 .29 .30 .26 .28 .23 .25 .21 .230° .19 .21 .17

0 70 .64 .62 .52 .57 .42 .52 .35 .47 .30 .43 .25 approx..40 .22 250 cd.37 .20 max. .34 .17 .32 .16 .29 .14 .28

90° 50

.62 .55 .48 .42 .37 45° .33 .30 .27 .25 .23 .21

30 .62 .53 .44 .38 .33 .29 .25 .23 .20 .18 .17

0 .53 .45 .38 .32 .28 .24 .21 .19 .17 .15 .14

50 1.5’ .60 .52 3.0’ .46 4.5’ .40 .36 6.0’ .32 7.5’ .29 .26 9.0’ .24 0° .22 .20

30 10 0 Center Beam FC Beam Width 0 30 20 50 30 20 50 30 20 4.7’ .55 4.5’ .57 .57 .57 .55 .60 .60 108.97 .55 .53 .51 .49 .50 .49 .48 .48 .47 .46 .45 27.24 9.0’ 9.3’ .43 .41 .44 .42 .40 .42 .40 .39 .37 .39 .36 .33 14.0’ .37 .34 12.11 .37 .3513.5’ .33 .32 .32 .29 .35 .31 .29 .33 .30 .28 .27 6.81 18.7’ 18.0’ .28 .25 .31 .27 .25 .30 .27 .24 .23 .28 .24 .22 23.4’ .25 .22 4.36 .27 .2422.5’ .21 .20 .25 .22 .19 28.0’ .22 .19 3.03 .25 .2127.0’ .19 .18 .20 .17 .23 .20 .17 .23 .19 .17 .16 Spread: Spread: .21 .18 .1590° .21 .18 .16114.6° .18 112.6° .15 .14 .17 .14 .20 .16 .14 .19 .16 .14 .13

Coefficients Of Utilization

Code L101

Mount RCC %: RW %: 70 RCR: 0 .61 1 .56 2 .51 N = no3angle .47 .43 A = 45°45 angle .39 6 .36 7 .33 8 .31 9 .29 10 .27

Length70 (L)

50 30 0 70 50 30 .61- .61 .61 .60 .60 .60 .54 .52 .50 .55 .52 .51 .47 .43 .40 .50 .46 .43 = 1’ .45 (305mm) .40 .36 .41 .371 .34 .36 .32 .28 .41 .36 .31 2 = 2’ (610mm) .33 .28 .24 .38 .32 .28 = 3’ .35 (914mm) .29 .24 .29 .253 .21 .26 .22 .19 .33 .26 .22 4 = 4’ (1219mm) .24 .20 .17 .30 .24 .20 .22 .18 .22 .188 .15 = 8’ .28 (2438mm) .20 .16 .14 .27 .20 .16

X = custom

Effective Floor Cavity Reflectance: 20%

Spacing (s) 50

10 Color0

50 50 30 20 0 .51 .57 .57 .57 .55 .44 .50 .49 .47 .48 .37 .44 .41 .39 .42 = 2” .35(51mm) .33 .37 .31S2 .39 .27 .34 .31 .28 .33 S3 = 3” (76mm) .23 .31 .27 .24 .30 between LEDs.27 .24 .21 .20 .28 .18 .25 .21 .19 .24 .16 .23 .19 .17 .22 .15 .21 .18 .15 .21 .13 .20 .16 .14 .19

30 20 0 50 30 20 .55 .55 .52 .52 .52 .51 .47 .46 .46 .45 .44 .43 .40 .38 .41 .39 .37 .36 W27S = 2700K, std CRI .34 .32 .36 .30 .34 .31 .30 .27 .32 .29 .27 .26 W30S = 3000K, std CRI .26 .24 .29 .26 .23 .22 W35S = 3500K, std CRI .23 .21 .26 .20 .23 .21 .21 .18 .24 .21 .18 .17 W41S = 4100K, std CRI .19 .16 .22 .19 .16 .15 .17 .15 .17 .15 .20 W20H = 2000K, high.14 CRI .16 .13 .19 .16 .13 .12

Beam

Lens

W W = wide flood (120°)

Finish -

T = flat clear F = flat frosted C = convex clear

MA MA = matte clear anodized

W30H = 3000K, high CRI NOTE: S2 = 12’ (3658mm) max. S3 = 18’ (5486mm) max

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

136 137

Image shows L102A-XS56W30SWT-MA

L102

www.mplighting.com

Linear Systems

L102 Linear Strip Light Application Indoor linear cove, wall slot, shelf, and cabinet illumination. Source 0.07W, 20mA LEDs (1.9W/Ft or 3.9W/Ft) Input Current S28 = 80mA/foot. S56 = 160mA/foot. Driver Remote 120V primary, constant voltage driver (not included). LED Input Voltage 24V DC

S (LED spacing)

Power Consumption S28 = 2.3W/foot S56 = 4.6W/foot Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1-1/4” 32mm

Weight 0.56lbs (0.25kg)/foot. 1/8” 3mm

Material Aluminum and polycarbonate. RoHS compliant.

End feed only.

L (circuit board length)

Mounting Surface mount. Includes aluminum mounting channel with wiring compartment. Comes with 3’ (914mm) wire lead.

45 .

0°

Approval Dry locations. Approved to US and Canadian standards by CSA. 1-3/8” 35mm

50 See page 192 for explanation of symbols and IP ratings. Shown with 45° angle mount, Flat lens

L102N 4’ Length S28 Spacing 120° Flat Frosted 3000K Std 285 lm

Polar Candela Distribution

Convex clear lens

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 100 cd max.

45°

Polar Candela Coefficients OfDistribution Utilization

-90° RW %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

70 .73 .66 .60 .55 .50 .46 .43 .40 .37 .34 .32

4.4’

4.8’

3.0’

11.71

8.7’

9.7’

4.5’

5.20

13.1’

14.5’

6.0’

2.93

17.5’

19.4’

7.5’

1.87

21.8’

24.2’

9.0’

1.30

26.2’

29.1’

1” 1” 25mm 25mm

1-1/4” 1-1/4” 32mm 32mm

Shown with no angle mount, Flat lens

Convex clear lens

90° Spread: 116.5°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

46.84

0° Spread: 111.0°

0°

L102N 4’ Length S56 Spacing 120° Flat Frosted 3000K Std 565 lm

Beam Width

1.5’

50 30 .73 .73 .64 .61 .55 .51 .49 .44 .43 .38 .38 .33 .35 .29 .31 .26 .29 .23 .260° .21 .24 .19

0 70 .73 .71 .59 .65 .48 .59 .40 .54 .34 .49 .29 approx..45 .25 210 cd.42 .22 max. .39 .20 .36 .18 .34 .16 .31

90° 50

.71 .62 .54 .48 .42 45° .38 .34 .31 .28 .26 .24

30 .71 .60 .50 .43 .37 .33 .29 .26 .23 .21 .19

0 .61 .51 .43 .37 .32 .28 .24 .21 .19 .17 .16

50 1.5’ .68 .59 3.0’ .52 4.5’ .46 .41 6.0’ .36 7.5’ .33 .30 9.0’ .27 0° .25 .23

30 10 0 Center Beam FC Beam Width 0 30 20 50 30 20 50 30 20 4.4’ .62 4.9’ .65 .65 .65 .62 .68 .68 93.51 .62 .61 .57 .56 .57 .55 .54 .55 .53 .52 .51 23.38 9.7’ 8.8’ .49 .46 .50 .47 .45 .48 .46 .44 .43 .44 .41 .38 13.2’ .42 .39 10.39 .42 .4014.6’ .37 .36 .36 .33 .39 .35 .32 .38 .35 .32 .31 5.84 17.5’ 19.5’ .32 .28 .35 .31 .28 .34 .31 .28 .26 .32 .28 .25 21.9’ .28 .25 3.74 .31 .2724.3’ .24 .23 .29 .25 .22 26.3’ .25 .22 2.60 .28 .2429.2’ .22 .20 .23 .20 .26 .22 .19 .26 .22 .19 .18 Spread: Spread: .24 .20 .1790° .24 .21 .18111.3° .20 116.7° .17 .16 .19 .16 .23 .19 .16 .22 .18 .16 .15

Coefficients Of Utilization

Code L102

Mount RCC %: RW %: 70 RCR: 0 .73 1 .66 2 .60 N = no3angle .55 4 .50 A = 45° angle 5 .46 6 .43 7 .40 8 .37 9 .34 10 .32

Length70 (L)

50 30 0 70 50 30 .73- .73 .73 .71 .71 .71 .64 .61 .59 .65 .62 .60 .55 .51 .48 .59 .54 .50 = 1’ .54 (305mm) .48 .43 .49 .441 .40 .43 .38 .34 .49 .42 .37 2 = 2’ (610mm) .38 .33 .29 .45 .38 .33 = 3’ .42 (914mm) .34 .29 .35 .293 .25 .31 .26 .22 .39 .31 .26 4 = 4’ (1219mm) .29 .23 .20 .36 .28 .23 .26 .21 .26 .218 .18 = 8’ .34 (2438mm) .24 .19 .16 .31 .24 .19

X = custom

Effective Floor Cavity Reflectance: 20%

Spacing 50

(s) 30

0 50 30 20 50 30 .61 .68 .68 .68 .65 .65 .52 .59 .58 .56 .57 .55 .43 .52 .49 .46 .50 .47 28 .39 LEDs.44 per .41 1’ .46=.42 .37S28 .32 .41 .36 .33 .39 .35 S56 = 56 LEDs per 1’ .28 .36 .32 .28 .35 .31 .24 .33 .28 .25 .32 .28 .21 .30 .25 .22 .29 .25 .19 .27 .23 .20 .26 .22 .17 .25 .21 .18 .24 .20 .16 .23 .19 .16 .23 .19

Color 0

Beam

0 20 50 30 20 .65 .62 .62 .62 .61 W .54 .55 .53 .52 .51 .45 .48 .46 .44 .43 W22S = std CRI W = wide flood .38 .42 .402200K, .37 .36 .32 .38 .35 .32 .31 W27S = 2700K, std CRI (120°) .28 .34 .31 .28 .26 W30S = std CRI .25 .31 .273000K, .24 .23 .22 .28 .24 .22 .20 .19 .26 .22 .19 .18 .16 .24S28 .20=.17 .17 NOTE: 32’ (9754mm) max. .15 .18=.16 .16 .22S56 18’ (5486mm) max.

Lens

Finish -

T = flat clear F = flat frosted C = convex clear

MA MA = matte clear anodized

Standard CRI has a value of 75~82.

138 139

Image shows L103-XS3W30SWT-EMA

drop drop

Linear Systems

2-3/4” 70mm

L103 Linear Strip Light Application Suspended or wall mounted linear LED strip light. Source 1W, 350mA LEDs (4W/Ft or 6W/Ft)

2-1/8” 54mm

Input Current S2 = 350mA/foot S3 = 230mA/foot

1-7/8” 48mm

3-1/8” 79mm

3-7/8” 98mm

4-1/4” 108mm

Driver Remote 120V primary, constant voltage driver (not included).

S (LED spacing)

2-1/8” 54mm

LED Input Voltage 24V DC Power Consumption S2 = 8W/foot S3 = 6W/foot

1-1/4” 32mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1/8” 3mm

L103

www.mplighting.com

1-7/8” 48mm

1:3

L (circuit board length)

Weight 0.90lb (0.41kg)/foot. Material Aluminum and polycarbonate. RoHS compliant. 2-3/4” 70mm

Mounting Mounts directly to surface or by wall bracket, rod or cable suspension set (sold separately, see pages 168-169). Comes with 6’ (1829mm) wire lead. Power feed is 12” (305mm) from the end.

drop drop

Approval Dry locations. Approved to US and Canadian standards by CSA.

3-1/8” 79mm

Note Recommended suspension points should be 4’ (1219mm) on center maximum. 2-1/8” 54mm

3-1/8” 79mm

4-1/4” 108mm

2-1/8” 54mm

1-7/8” 1-7/8” 48mm 48mm

3-7/8” 98mm

50 See page 192 for explanation of symbols and IP ratings.

L103 4’ Length S2 Spacing 120° Flat Frosted 3000K Std 1000 lm

Shown as wall mount (SDF070) Convex clear lens

Polar Candela Distribution

Shown as rod suspension (SDF061) Flat frosted lens

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

45°

approx. 380 cd max.

L103 4’ Length S3 Spacing 120° Flat Frosted 3000K Std 782 lm

Polar Candela Coefficients OfDistribution Utilization

-90° RW %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

70 .64 .58 .53 .48 .44 .41 .38 .35 .32 .30 .28

50 30 .64 .64 .56 .54 .49 .45 .43 .38 .38 .33 .34 .29 .30 .26 .28 .23 .25 .21 .230° .19 .21 .17

4.8’

3.0’

42.42

9.5’

4.4’ 8.9’

4.5’

18.86

14.3’

13.3’

6.0’

10.61

19.0’

17.7’

7.5’

6.79

23.8’

22.1’

9.0’

4.71

28.5’

26.6’

90° Spread: 111.7°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

169.70

0° Spread: 115.5°

0°

Beam Width

1.5’

0 70 .64 .62 .52 .57 .42 .52 .35 .47 .30 .43 .25 approx..40 .22 250 cd.37 .20 max. .34 .17 .32 .16 .29 .14 .28

90° 50

.62 .55 .48 .42 .37 45° .33 .30 .27 .25 .23 .21

30 .62 .53 .44 .38 .33 .29 .25 .23 .20 .18 .17

0 .53 .45 .38 .32 .28 .24 .21 .19 .17 .15 .14

50 1.5’ .60 .52 3.0’ .46 4.5’ .40 .36 6.0’ .32 7.5’ .29 .26 9.0’ .24 0° .22 .20

Coefficients Of Utilization

Code L103

Length (L)80

RCC %:

RW %: 70 50 30 RCR: 0 .61 .61 .61 1 .56 .54 .52 2 .51 .47 .43 4 = 4’ .47 .41 .37 3 (1219mm) .43 .36 .32 4 (2438mm) 8 = 8’ 5 .39 .33 .28 X = 6custom .36 .29 .25 7 .33 .26 .22 8 .31 .24 .20 9 .29 .22 .18 10 .27 .20 .16

Spacing (s) 70

Effective Floor Cavity Reflectance: 20%

Color

50 30 50 30 20 0 70 50 30 0 .61 .60 .60 .60 .51 .57 .57 .57 .55 .55 .50 .55 .52 .51 .44 .50 .49 .47 .48 .47 .40 .50 .46 .43 .37 .44 .41 .39 .42 .40 2700K, S2 = (51mm) .34 .35 .33 .37 .452”.40 .36 .31 .39 W27S = .34 .30 .31 .28 .33 .413”.36 .31 .27 .34 W30S = .28 3000K, S3 = (76mm) .24 .38 .32 .28 .23 .31 .27 .24 .30 .26 3500K, .35between .23 .24 .21 .27 .29 .24 LEDs .20 .28 W35S = .21 .21 .21 .19 .24 .19 .33 .26 .22 .18 .25 W41S = 4100K, .17 .30 .24 .20 .16 .23 .19 .17 .22 .19 2000K, .18 .15 .21 .15 .28 .22 .18 .15 .21 W20H = .17 .16 .14 .19 .14 .27 .20 .16 .13 .20 W30H = .16 3000K,

20 50 .55 .52 .46 .46 .38 .41 std .32 CRI .36 .27 CRI .32 std .24 .29 std .21 CRI .26 .18 CRI .24 std .16 .22 high .20 .15 CRI .19 .13 CRI high

Beam

0 30 20 .52 .52 .51W .45 .44 .43 .39 .37 .36 .30 flood .34 W .31= wide .29 (120°) .27 .26 .26 .23 .22 .23 .21 .20 .21 .18 .17 .19 .16 .15 .17 .15 .14 .16 .13 .12

Lens

Power Feed -

T = flat clear F = flat frosted C = convex clear

Finish MA

E = end feed T = top feed

MA = matte clear anodized

NOTE: S2 = 12’ (3658mm) max. S3 = 18’ (5486mm) max

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

140 141

Image shows L104-XS3W30SSF-TMA. Using SDF060 mountings

Ø1” Ø25mm

L104

www.mplighting.com

drop

L104 Linear Strip Light

drop

Application Suspended or wall mounted linear LED strip light. Source 1W, 350mA LEDs (4W/Ft or 6W/Ft) 3-1/8” 79mm

Input Current S2 = 350mA/foot S3 = 230mA/foot Driver Remote 120V primary, constant voltage driver (not included).

4-1/2” 114mm 2-3/8” S (LED spacing) 60mm

2-3/8” 60mm

LED Input Voltage 24V DC

Linear Systems

2-3/4” 70mm

2-3/8” 60mm

Power Consumption S2 = 8W/foot S3 = 6W/foot

1-1/4” 32mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1/8” 3mm

L (circuit board length)

Weight 0.90lb (0.41kg)/foot. Material Aluminum and polycarbonate. RoHS compliant. 2-3/4” 70mm

Mounting Mounts directly to surface or by wall bracket, rod or cable suspension set (sold separately, see pages 168-169). Wall brackets for tiltable wall mount are included. Comes with 6’ (1829mm) wire lead. Power feed is 12” (305mm) from the end.

drop 3-1/8” 79mm

Approval Dry locations. Approved to US and Canadian standards by CSA. Note Recommended suspension points should be 4’ (1219mm) on center maximum.

4-1/2” 114mm

2-3/8” 60mm

50 See page 192 for explanation of symbols and IP ratings.

L104 4’ Length S2 Spacing 12° Flat Frosted 3000K Std 1060 lm

Shown as wall mount (SDF070)

Polar Candela Distribution

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 3000 cd max.

45°

1,351.38

0.6’

3.0’

337.84

1.3’

4.5’

150.15

1.9’

6.0’

84.46

2.6’

7.5’

54.06

3.2’

9.0’

37.54

3.9’

0° Spread: 24.2°

Polar Candela Coefficients OfDistribution Utilization

-90° RW %:

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

70 .73 .66 .60 .55 .50 .46 .43 .40 .37 .34 .32

50 30 .73 .73 .64 .61 .55 .51 .49 .44 .43 .38 .38 .33 .35 .29 .31 .26 .29 .23 .260° .21 .24 .19

3” 76mm

2” 51mm

90° Spread: 24.2°

4-1/4” 108mm

3-5/8” 92mm

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

Beam Width

1.5’

0°

L104 4’ Length S3 Spacing 12° Flat Frosted 3000K Std 713 lm

Shown as cable suspension (SDF061)

0 70 .73 .71 .59 .65 .48 .59 .40 .54 .34 .49 .29 approx..45 .42 .25 2000 cd .22 max. .39 .20 .36 .18 .34 .16 .31

90° 50

.71 .62 .54 .48 .42 45° .38 .34 .31 .28 .26 .24

30 .71 .60 .50 .43 .37 .33 .29 .26 .23 .21 .19

0 .61 .52 .43 .37 .32 .28 .24 .21 .19 .17 .16

50 .68 1.5’ .59 3.0’ .52 .46 4.5’ .41 6.0’ .36 7.5’ .33 .30 9.0’ .27 0° .25 .23

30 10 0 Center Beam FC Beam Width 30 20 50 30 20 50 30 20 .65 .65 .65 .62 .68 .68 901.27 .62 0.6’ .62 0.6’ .58 .56 .57 .55 .54 .55 .53 .52 225.32 1.3’ 1.3’ .49 .46 .50 .47 .45 .48 .46 .44 .44 .41 .38 .42 .42 .39 100.14 1.9’ .40 1.9’ .37 .36 .33 .39 .35 .32 .38 .35 .32 56.33 2.6’ 2.6’ .32 .28 .35 .31 .28 .34 .31 .28 3.2’ .27 3.2’ .32 .28 .25 .31 .28 .25 36.05 .24 .29 .25 .22 .28 .25 .22 25.04 .22 3.9’ .24 3.9’ .23 .20 .26 .22 .19 .26 .22 .19 Spread: Spread: .24 .20 .1790° .24 .21 .1824.2° .20 24.2° .17 .19 .16 .23 .19 .16 .22 .18 .16

0 .61 .51 .43 .36Lumen test .31results provided .26by MP Lighting .23 integrating sphere .20 .18(see page 194). .16 .15

Shown as tiltable wall mount (L104T)

3” 76mm

Coefficients Of Utilization Suspended or Wall Mount: (hardware sold separately)

Code L104 Tiltable Wall L104T

Length (L)

RCC %:

Spacing (s)

%: 70 50 30 0 70 50 30 0 - RW RCR: 0 .71 .71 .71 .71 .69 .69 .69 .60 1 .67 .64 .63 .61 .65 .63 .61 .54 2 .62 .59 .56 .53 .61 .58 .55 .48 Mount: (wall brackets included) 3 .59 .54 .50 .47 .57 .53 .50 .44 4 .55 .50 .46 .43 .54 .49 .45 .41 5 .52 .46 .42 .39 .51 .46 .42 .38 6 .50 .44 .39 .37 .49 .43 .39 .35 7 .47 .41 .37 .34 .46 .41 .37 .33 .442” .38 .35 .32 .45 .39 .35 .32 S2 = (51mm) 4 = 84’ (1219mm) 9 .43 .37 .33 .31 .42 .37 .33 .30 S3 = (76mm) 8 =108’ (2438mm) .413” .35 .31 .29 .41 .35 .32 .29

X = custom

between LEDs

Effective Floor Cavity Reflectance: 20%

Color

50 30 20 50 30 .66 .66 .66 .63 .63 .61 .59 .58 .58 .57 .56 .53 .51 .54 .52 .51 .48 .46 .50 .47 .48 .45 .42 .46 .44 .45 .41 .39 .44 .41 .42 .39 .36 .41 .38 .40 .36 .34 .39 .36 .37 .34 .38 W27S = .34 .32 2700K, .36 .33 .30 .35 .32 .34 .31 .34 W30S = .31 .29 3000K,

20 50 .63 .61 .56 .56 .50 .52 .45 .48 .42 .45 .38 .43 .36 .40 .34 .38 .32 CRI .36 std .30 .35 std .29 CRI .33

W35S = 3500K, std CRI W41S = 4100K, std CRI W20H = 2000K, high CRI W30H = 3000K, high CRI

Beam

0 30 20 .61 .61 .60 .55 .54 .53 .50 .49 .48 .46 .45 .43 .43 .41 .40 .40 .38 .37 .38 .36 .35 .36 .33 .33 .31 (12°) .34 S.32 = spot .32 .30 .29 = narrow .28 .31 N.29

Lens

Power Feed

51mm

MA 4-1/4”

3-5/8” 92mm

108mm

T = flat clear F = flat frosted

Finish 2”

MA E = end feed T = top feed

MA = matte clear anodized

flood (30°) NOTE: S2 = 12’ (3658mm) max. & S3 = 18’ (5486mm) max

Standard CRI has a value of 75~82 while high CRI has 92.

142

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

143

Image shows L106S-XS3W30SNT-MA

L106

www.mplighting.com

Linear Systems

L106 Linear LED Downlight

3” 76mm

Application Indoor linear cove, shelf, and cabinet illumination. Source 1W, 350mA LEDs (4W/Ft or 6W/Ft) Input Current S2 = 350mA/foot S3 = 230mA/foot

2” 51mm

Driver Remote 120V primary, constant voltage driver (not included).

2-5/8” 67mm

LED Input Voltage 24V DC Power Consumption S2 = 8W/foot S3 = 6W/foot

3-3/8” 86mm

S (LED spacing)

1-1/4” 32mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1-1/2” 38mm 1/8” 3mm

Weight 0.90lb (0.41kg)/foot.

End feed only.

L (circuit board length) 3” 76mm

Material Aluminum and polycarbonate. RoHS compliant. Mounting Surface or tiltable wall mount. Includes aluminum mounting channel with wiring compartment. Comes with 3’ (914mm) wire lead. Approval Dry locations. Approved to US and Canadian standards by CSA. 1-1/2” 38mm

50 See page 192 for explanation of symbols and IP ratings.

L106 4’ Length S2 Spacing 12° Flat Frosted 3000K Std 1060 lm

3-3/8” 86mm

Shown as tiltable wall mount (L106T)

Shown as surface mount (L106S)

Polar Candela Distribution

2” 51mm

2-5/8” 67mm

Illuminance at a Distance

180° -90°

Center Beam FC

90°

-45°

approx. 3000 cd max.

45°

L106 4’ Length S3 Spacing 12° Flat Frosted 3000K Std 713 lm

Polar Candela Coefficients OfDistribution Utilization

-90° RW %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

70 .73 .66 .60 .55 .50 .46 .43 .40 .37 .34 .32

50 30 .73 .73 .64 .61 .55 .51 .49 .44 .43 .38 .38 .33 .35 .29 .31 .26 .29 .23 .260° .21 .24 .19

0.6’

3.0’

337.84

1.3’

4.5’

150.15

1.9’

6.0’

84.46

2.6’

7.5’

54.06

3.2’

9.0’

37.54

3.9’

90° Spread: 24.2°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

180°

RCC %:

1,351.38

0° Spread: 24.2°

0°

Beam Width

1.5’

0 70 .73 .71 .59 .65 .48 .59 .40 .54 .34 .49 .29 approx..45 .42 .25 2000 cd .22 max. .39 .20 .36 .18 .34 .16 .31

90° 50

.71 .62 .54 .48 .42 45° .38 .34 .31 .28 .26 .24

30 .71 .60 .50 .43 .37 .33 .29 .26 .23 .21 .19

0 .61 .52 .43 .37 .32 .28 .24 .21 .19 .17 .16

50 1.5’ .68 .59 3.0’ .52 4.5’ .46 .41 6.0’ .36 7.5’ .33 .30 9.0’ .27 0° .25 .23

30 10 0 Center Beam FC Beam Width 30 20 50 30 20 50 30 20 0.6’ .62 0.6’ .65 .65 .65 .62 .68 .68 901.27 .62 .58 .56 .57 .55 .54 .55 .53 .52 225.32 1.3’ 1.3’ .49 .46 .50 .47 .45 .48 .46 .44 1.9’ .40 1.9’ .44 .41 .38 .42 .42 .39 100.14 .37 .36 .33 .39 .35 .32 .38 .35 .32 56.33 2.6’ 2.6’ .32 .28 .35 .31 .28 .34 .31 .28 3.2’ .27 3.2’ .32 .28 .25 .31 .28 .25 36.05 .24 .29 .25 .22 .28 .25 .22 25.04 .22 3.9’ .24 3.9’ .23 .20 .26 .22 .19 .26 .22 .19 Spread: Spread: .24 .20 .1790° .24 .21 .1824.2° .20 24.2° .17 .19 .16 .23 .19 .16 .22 .18 .16

0 .61 .51 .43 .36 .31 .26 .23 .20 .18 .16 .15

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

Code L106

RCC Mount %:

RW %: 70 50 30 RCR: 0 .71 .71 .711 .67 .64 .63 2 .62 .59 .56 3 .59mount .54 .50 S = surface 4 .55 .50 .46 T = tiltable wall.46 .42 5 .52 6 .50 .44 .39 mount 7 .47 .41 .37 8 .45 .39 .35 9 .43 .37 .33 10 .41 .35 .32

70 (L) Length

0 70 50 30 0 .71 .69 .69 .69 .60 .61 .65 .63 .61 .54 .53 .61 .58 .55 .48 .53 .50 .44 .474 =.57 4’ (1219mm) .43 .54 .49 .45 .41 8’ (2438mm) .46 .42 .38 .398 =.51 .43 .39 .35 .37X =.49 custom .34 .46 .41 .37 .33 .32 .44 .38 .35 .32 .31 .42 .37 .33 .30 .29 .41 .35 .31 .29

30(s) Spacing

50 30 .66 .66 .61 .59 .56 .53 .51 .48 S2 = .48 .45 S3 = .45 .41 .42 .39 .40 .36 .38 .34 .36 .33 .34 .31

20 50 30 20 .66 .63 .63 .63 .58 .58 .57 .56 .51 .54 .52 .50 .50 .47 .45 .46(51mm) 2” .42 .46 .44 .42 3” .44 .41 .38 .39(76mm) .38 .36 .36 .41 LEDs between .34 .39 .36 .34 .32 .37 .34 .32 .30 .35 .32 .30 .29 .34 .31 .29

Color

0 50 30 20 .61 .61 .61 .60 .56 .55 .54 .53 .52 .50 .49 .48 .43 .48 .46 .452700K, W27S = .45 .43 .41 .40 W30S = .37 .43 .40 .383000K, .40 .38 .36 .35 W35S = 3500K, .38 .36 .33 .33 W41S = .31 .36 .34 .324100K, .35 .32 .30 .29 W20H = 2000K, .33 .31 .29 .28

std CRI std CRI std CRI std CRI high CRI W30H = 3000K, high CRI

Beam

Lens

Finish -

S = spot (12°) N = narrow flood (30°)

T = flat clear F = flat frosted

MA MA = matte clear anodized

NOTE: S2 = 12’ (3658mm) max. S3 = 18’ (5486mm) max

Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

144 145

Image shows L111C-8S1W30SS-XMA

L (length) 10-7/8” 276mm

1-3/4” 44mm

2-5/8” 67mm

5-7/8” 149mm 5-7/8” 149mm

2-5/8” 67mm 2-5/8” 67mm

Application Indoor linear downlight.

5-7/8” 149mm 5-7/8” 149mm

1-3/4” 44mm 1-3/4” 44mm

Linear Systems

10-7/8” 276mm 10-7/8” 276mm

stem

L111 Linear Downlight

5-7/8” 149mm

L (length) 5-7/8” 149mm

L111

www.mplighting.com

70mm 2-3/4” 70mm 1/4” 6mm 1/4” 6mm

drop drop

Source 1W, 350mA LEDs (6W/Ft or 12W/Ft).

2-3/4” 70mm

Input Current S1 = 350mA/foot S2 = 230mA/foot Driver Remote 120V primary. Canopy mount is powered by surface L (length) mounted driver with optional dimming controller (included). Please specify. Tiltable wall mount is powered by remote driver (not included). Power Consumption S1 = 12W/foot S2 = 6W/foot

10-7/8” 276mm

5-7/8” Dimming 0~10V dimming with remote dimmable driver for tiltable wall 149mm mount option (not included). See page 186-190 for Recommended Driver Chart. 2-5/8”

1/4” 6mm

S (LED spacing)

2-3/4” 70mm 2-3/4” 70mm

1/4” 6mm 1/4” 6mm

L (length)

S (LED spacing)

L (length)

5-7/8” 149mm

1-3/4” 44mm

Shown as canopy mount (L111C)

67mm

Weight 14lbs (6.28kg) with 4’ (1219mm) length fixture.

drop

Material Anodized aluminum. RoHS compliant. Mounting Mounts to ceiling using power canopy (included). 8’ (2438mm) fixture comes with 2 stem supports, 6’ (1829mm) maximum drop. Or mounts to wall using tiltable wall bracket. See pages S (LED spacing) 168-170 for more2-3/4” mounting options. 70mm

4-1/2” 114mm

5/8” 16mm 1/4” 6mm

L (length)

4-1/2”

5/8” 16mm

Approval Dry locations. Approved 114mm to US and Canadian standards by CSA.

2-3/4” 70mm

See page 192 for explanation of symbols and IP ratings.

L111 4’ Length S1 Spacing 12° 3000K Std 2410 lm

Polar Candela Distribution

2-3/4” 70mm

approx. 17500 cd max.

45°

-90° RW %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

RCR: 0 1 2 3 4 -45° 5 6 7 8 9 10

180°

2-1/2” 64mm

Beam Width

1,091.02

1.6’

8.0’

272.76

3.3’

12.0’

121.22

4.9’

16.0’

68.19

6.5’

6.6’

20.0’

43.64

8.2’

24.0’

30.31

9.8’

90° Spread: 23.2°

Illuminance at a Distance Effective Floor Cavity Reflectance: 20%

30 10 0 Center Beam FC Beam Width 70 50 30 0 70 90° 50 30 0 50 30 20 50 30 20 50 30 20 0 2.4’1.03 2.4’ 1.03 1.01 1.08 1.08 1.08 1.03 1.12 1.12 1.12 301.76 1.20 1.20 1.20 1.20 1.18 1.18 1.18 1.01 4.0’ 1.15 1.13 1.10 1.08 1.13 1.10 1.08 .96 1.06 1.05 1.03 1.03 1.01 1.00 .99 .98 .97 .95 75.44 4.8’ 4.8’ 8.0’ 1.10 1.06 1.02 .99 1.08 1.04 1.01 .91 1.01 .98 .96 .98 .96 .94 .95 .94 .92 .90 7.2’ .89 7.2’ .88 .86 .94 .91 .89 .92 .96 .93 .90 33.53 1.06 1.00 .96 .92 1.04 .99 .95 .87 12.0’ 1.02 .95 .91 .87 1.00 .94 .90 .83 .92 .89 .86 .90 .87 .85 .89 .86 .84 .82 18.86 9.6’ 9.6’ 16.0’ 45° .98 .91 .86 .83 approx..97 .90 .86 .80 .89 .85 .82 .87 .84 .81 .86 .83 .80 .79 .84 .80 .78 12.0’ .85 .81 .78 12.07 .94 .87 .82 .77 20.0’ .95 .87 .82 .79 .83 .8012.0’ .77 .76 5000 cd .81 .77 .75 14.5’ .82 .78 .75 8.38 .92 .84 .79 .76 .80 .7714.4’ .74 .73 max. .91 .83 .79 .74 24.0’ .89 .81 .76 .73 .88 .81 .76 .72 .80 .75 .72 .79 .75 .72 .78 .74 .72 .71 0° Spread: Spread: .76 .72 .7090°.75 .73 .7033.5° .86 .780°.74 .70 .85 .78 .73 .69 .77 .72 33.4° .70 .68 .84 .76 .71 .68 .83 .75 .71 .67 .75 .71 .68 .74 .70 .68 .73 .70 .67 .66

Length 50 (L)

Coefficients Of Utilization

Code L111

RCC %:

1/4” 6mm

4.0’

0° Spread: 23.1°

Polar Candela Coefficients OfDistribution Utilization RCC %:

Center Beam FC

90°

0°

L111 4’ Length S2 Spacing 30° 3000K Std 1250 lm

L (length)

S (LED spacing) Illuminance at a Distance

180°

-45°

Shown as canopy mount (L111T) S (LED spacing)

L (length)

-90°

2-1/2” 64mm

Mount 80

Effective Floor Cavity Reflectance: 20%

Spacing 30

(s)10

RW %: 70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 0 RCR: 0 1.21 1.21 1.21 1.21 1.18 1.18 1.18 1.01 1.13 1.13 1.13 1.08 1.08 1.08 1.03 1.03 1.03 1.01 1 1.15 1.12 1.09 1.07 1.12 1.10 1.07 .95 1.05 1.04 1.02 1.02 1.00 .99 .98 .97 .96 .94 2 1.09 1.04 1.00 .97 1.07 1.02 .99 .89 .99 .96 .93 .96 .94 .91 .93 .91 .90 .88 S1 = 1” (25mm) C = canopy (non-dimmable) W27S = 4 = 4’ (1219mm) 3 1.04 .98 .93 .89 1.02 .96 .92 .83 .94 .90 .87 .91 .88 .85 .89 .86 .84 .82 .87 .832”.80 .89 .84 .81 S2 = .92 .87 .83 .98 .91 6.86 4 .99 (dimmable) .85 .82 .79 .78 (51mm) CD = canopy W30S = = .79 6’ (1829mm) 5 .95 .87 .81 .77 .93 .86 .81 .75 .84 .80 .76 .83 .79 .76 .81 .78 .75 .74 T = tiltable wall mount W35S = = .71 8’ (2438mm)* .75 .72 LEDs .80 .76 .72 .79 between 6 .91 .83 .77 .73 .90 .82 8.77 .78 .74 .71 .70 7 .87 .79 .73 .69 .86 .78 .73 .68 .77 .72 .69 .76 .71 .68 .75 .71 .68 .67 W41S = 8 .84 .75 .70 .66 .83 .75 .69 .65 .74 .69 .65 .73 .68 .65 .72 .68 .65 .64 W20H = only .62 .70 .65 .62 .69 .65 .62 .71 .66 .66length .62 fixture 9 .81 .72 .66 .63 .80 .71 *8’ .61 .68spacing. .63 .60 .67 .63 .60 .66 .62 .60 .63 .59 in S2 10 .78 .69 .64 .60 .77 .69 available .58 W30H =

Color

Drop (Canopy Mount Only)

Beam -

2700K, std CRI 3000K, std CRI 3500K, std CRI 4100K, std CRI 2000K, high CRI 3000K, high CRI

S = spot (12°) N = narrow flood (30°)

Finish MA

6 = 6” (152mm) min. X = custom length, 6’ (1829mm) max.

MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

146 147

Image shows L112-4S3W30S1-MA

3-3/8” 86mm

L112

www.mplighting.com 2-5/8” 67mm

Application Indoor linear downlight. Source 2.5W, 700mA LEDs (36 x 2.5W or 72 x 2.5W).

6-5/8” 168mm

Driver Integral 120V or 277V primary, constant voltage driver (please specify). Power Consumption 106W (4’) / 212W (8’)

Linear Systems

L112 Dual Linear Downlight

2-3/8” 60mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart. Weight 10lbs (4.73kg) with 4’ (1219mm) length fixture.

L (circuit board length)

Material Anodized aluminum with white reflectors. RoHS compliant.

1/8” 3mm

3-3/8” 86mm

Mounting Can be mounted by rod & cable suspension sets (sold separately, see pages 168 &170). Approval Dry locations. Approved to US and Canadian standards by CSA.

2-5/8” 67mm

20 See page 192 for explanation of symbols and IP ratings.

6-5/8” 168mm

2-3/8” 60mm

L112 4’ Length S3 Spacing 90° 3000K Std 4309 lm

Polar Candela Distribution

Illuminance at a Distance

1/8” 3mm

L (circuit board length) 180° -90°

Lumen test results provided by LSI.

Center Beam FC

90°

-45°

approx. 1900 cd max.

45°

Beam Width

1.5’

879.60

3.0’

2.5’

3.0’

219.90

6.0’

4.9’

4.5’

97.73

9.1’

7.4’

6.0’

54.98

12.1’

9.8’

7.5’

35.18

15.1’

12.3’

9.0’

24.43

18.1’

14.7’

0° Spread: 90.3°

0°

Shown with SDF065 and CPY52 configuration. Standoffs are 1’ (305mm) from the end for 4’ model & 1’-6” (457mm) from the end for 8’ model.

90° Spread: 78.5°

Coefficients Of Utilization Effective Floor Cavity Reflectance: 20%

RCC %:

Code L112

RW %: 70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 0 RCR: 0 1.19 1.19 1.19 1.19 1.16 1.16 1.16 1.00 1.11 1.11 1.11 1.06 1.06 1.06 1.02 1.02 1.02 1.00 1Length .89 Voltage 1.11 1.07 1.05 1.02 (s) .89 1.01 .98 .96 .97 Color .95 .93 .94 .92 .91 Input (L) 1.04 1.01 1.09 Spacing 2 1.03 .96 .91 .86 1.00 .94 .89 .79 .91 .87 .83 .88 .84 .81 .85 .82 .79 .77 3 .68 .95 .86 .80 .74 .93 .85 .79 .69 .82 .77 .72 .79 .75 .71 .77 .73 .70 4 .60 .88 .78 .70 .65 .86 .77 S3 .70 .61 .74 .68 .63 .72 W30S .67 .63 .70 .66 .62 5 .53 .82 .71 .63 .57 .80 .70 .62 .55 .68 .61 .56 .66 .60 .56 .64 .59 .55 6 .76 .64 .56 .51 .74 .63 .56 .49 .62 .55 .50 .60 .54 .50 .59 .53 .49 S3 = 2.66” (68mm) W30S = 3000K, std CRI 1 =.47 120V 4 = 4’7 (1219mm) .43 .71 .59 .51 .45 .69 .58 .51 .44 .57 .50 .45 .55 .49 .45 .54 .49 .44 .66 .54 .46 .41 .65 .53 .46 .40 8 = 8’8 (2438mm) between LEDs.52 .45 .41 .51 .45 .40 .50 .44 .40 2 =.38277V 9 .35 .62 .50 .42 .37 .61 .49 .42 .37 .48 .42 .37 .47 .41 .37 .46 .41 .37 10 .32 .58 .46 .39 .34 .57 .46 .39 .33 .45 .38 .34 .44 .38 .34 .43 .37 .34

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82.

148 149

Image shows L121-XS112W30SW-MA

L121

www.mplighting.com

Linear Systems

L121 Recessed Strip Light Application Indoor recessed linear LED light for vanity, wall and ceiling downlight illumination. Source 0.07W, 20mA LEDs (1.9W/Ft, 3.9W/Ft, or 7.8W/Ft). Input Current S28 = 80mA/foot S56 = 160mA/foot S112 = 320mA/foot Driver Remote 120V or 277V primary, constant voltage driver (not included). LED Input Voltage 24V DC 4-3/8” 111mm

1/8” 3mm

Power Consumption S28 = 2.3W/foot S56 = 4.6W/foot S112 = 9.2W/foot Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

S (LED spacing)

Weight 16.08lbs (7.3kg) with 4’ (1219mm) length fixture. Material Anodized aluminum with flat opal white lens. RoHS compliant. 3/4” 19mm

Mounting Recessed into wall with surface mount trim. Comes with 3’ (914mm) wire lead.

L (circuit board length)

Approval Damp and dry locations. Approved to US and Canadian standards by CSA.

2-3/4” 70mm

4-3/8” 111mm

1/8” See page 192 for explanation of symbols 3mm and IP ratings.

L121 2’ Length S56 Spacing 120° 3000K Std 72 lm

180° -90°

-45°

Center Beam FC

90°

66.94

2.0’

3.0’

2.0’

16.73

4.0’

6.0’

7.44

6.0’

9.1’

4.18

8.1’

12.1’

5.0’

2.68

10.1’

15.1’

6.0’

1.86

12.1’

18.1’

3.0’

3/4” 19mm

approx. 70 cd max.

45°

L121 2’ Length S112 Spacing 120° 3000K Std 140 lm

4.0’

L (circuit board length)

0° Spread: 90.4°

Polar Candela Distribution

Beam Width

1.0’

0°

90° Spread: 112.9°

Illuminance at a Distance

180° -90°

Lumen test results provided by MP Lighting integrating sphere (see page 194).

Code L121

4” 102mm

S Distance (LED spacing) Illuminance at a

Polar Candela Distribution

Center Beam FC

90°

-45°

approx. 140 cd max.

45°

135.76

2.0’

3.0’

2.0’

33.94

4.0’

5.9’

3.0’

15.08

6.0’

8.9’

4.0’

8.48

8.1’

11.9’

5.0’

5.43

10.1’

14.9’

6.0’

3.77

12.1’

17.8’

0° Spread: 90.4°

0°

Length (L)

Beam Width

1.0’

Spacing (s)

90° Spread: 112.2°

Color

Beam

W 2 = 2’ (610mm) 4 = 4’ (1219mm) 6 = 6’ (1829mm) 8 = 8’ (2438mm)

S28 = 28 LEDs per 1’ S56 = 56 LEDs per 1’ S112 = 112 LEDs per 1’

W27S = 2700K, std CRI W30S = 3000K, std CRI

W = wide flood (120°)

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82.

150 151

Image shows L161MB-48W30S12-MA

L161

www.mplighting.com

Ø2-3/8” Ø60mm

2” 51mm

Application Display case, wall wash, or picture illumination. Source 1W, 350mA LEDs (6W/Ft)

1/4” 6mm

Driver Remote 120V primary, 350mA driver (not included) LED Input Voltage 4V DC

stem 1-1/8” 29mm min.

2” 51mm

Power Consumption 7W/Ft 1” 25mm

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart.

1” 25mm

Weight 1.82lbs (0.827kg).

Linear Systems

L161 Display Case Lighting

1” 25mm

length

Shown as C1C (canopy) ceiling mount.

Material Anodized aluminum. RoHS compliant. 1” 25mm

Mounting Ceiling or wall mount. C1C mounts to custom 2” x 2” octagonal box (included). C1M retrofits to existing standard octagonal box using custom mounting plate (included). Also available with mounting bracket for millwork installations. Comes with 6’ (1829mm) wire lead. Approval Dry locations. Approved to US and Canadian standards by CSA.

1” 25mm

length

2” 51mm

1-3/8” 35mm min.

stem

Ø1-5/8” Ø41mm

See page 192 for explanation of symbols and IP ratings.

Shown as MB (mounting bracket) mount.

L161 12” length 85° 3000K Std 280 lm

Polar Candela Distribution

Isofootcandle Plot 2

180° -90°

90°

2 1

Lumen test results provided by MP Lighting integrating sphere (see page 194).

45°

-0°

-90°

Mount height: 1 ft Total LLF: 1

0°

Code

70 30 5 fc 10

approx. 230 cd max.

-45°

Mount

L161

Length

Color

Stem

C1C = Ø2-3/8” x 1/4” canopy w/ custom octagonal box C1M = Ø2-3/8” x 1/4” canopy w/ retrofit mounting plate MB = Ø1-5/8” mounting bracket

Finish -

12 = 12” (305mm) W27S = 2700K, std CRI 18 = 18” (457mm) W30S = 3000K, std CRI 24 = 24” (610mm) W35S = 3500K, std CRI X = custom up to 48” W41S = 4100K, std CRI (1219mm) W20H = 2000K, high CRI W30H = 3000K, high CRI

0 = no stem 6 = 6” (152mm) 12 = 12” (305mm) X = custom up to 24” (610mm)

MA = matte clear anodized BA = black anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

152 153

Image shows L171S-4S3W30SN6-MP

L171

www.mplighting.com

Linear Systems

L171 Linear Rail Light Application Outdoor / indoor wall grazing illumination. Source 1W, 350mA LEDs (4W/Ft or 6W/Ft). Input Current S2 = 350mA/foot S3 = 230mA/foot Driver Remote 120V primary, constant voltage driver (not included). LED Input Voltage 24V DC 2-1/4” 57mm

Power Consumption S2 = 8W/foot S3 = 7W/foot

L (length)

Dimming 0~10V dimming with remote dimmable driver (not included). See page 186-190 for Recommended Driver Chart. Weight 0.26lbs (0.12kg)/foot.

S (LED spacing)

180° max.

Material Heavy duty powder coated aluminum housing with tempered glass. Replaceable internal potted circuit boards and LEDs mounted to extruded aluminum heat sink. RoHS compliant.

5” 2-1/4” 127mm57mm

1-3/4” 45mm

Mounting Wall, ceiling or surface mounted via adjustable and lockable mounting bracket (2 mounting brackets included). 1-3/4” 44mm

1-3/8” 35mm

Approval Wet and dry locations. Approved to US and Canadian standards by CSA.

1-5/8” 41mm

1” 25mm

Ø3/8” Ø10mm

7/8” 22mm

2-3/4” 70mm

Shown as standard wall mount (W).

Note Standard 6’ (1829mm) 18 AWG water proof electrical lead is rear mounted to enable continuous row mounting.

4-1/4” 108mm Ø4-5/8” Ø117mm

65 See page 192 for explanation of symbols and IP ratings. offset

L171 4’ Length S2 Spacing 12° 3000K Std 1113 lm

Polar Candela Distribution

Shown as extended wall mount (E). 180°

Center Beam FC -90°

90°

-45°

approx. 7500 cd max.

45°

Coefficients Of Utilization Polar Candela Distribution

L171 4’ Length S3 Spacing 12° 3000K Std 738 lm

RCC %:

Lumen test results provided by MP Lighting integrating sphere (see page 194).

861.68

1.2’

6.0’

215.42

2.5’

9.0’

95.74

3.7’

12.0’

53.86

4.9’

15.0’

34.47

6.1’

18.0’

23.94

7.4’

90° Spread: 23.1°

IlluminanceEffective at a Distance Floor Cavity Reflectance: 20% 70

180°

Beam Width

3.0’

0° Spread: 23.1°

0°

RW %: 70 50 30 0 70 50 30 RCR: 0 1.04 1.04 1.04 1.04 1.0290° 1.02 1.02 -90° 1 1.00 .98 .96 .95 .98 .96 .95 2 .96 .93 .90 .87 .95 .91 .89 3 .93 .88 .84 .82 .91 .87 .84 4 .89 .84 .80 .77 .88 .83 .79 5 .86 .80 .76 .73 .85 .79 .76 -45° 6 .83 .77 .73approx. .70 .8245°.76 .72 7 .81 .74 .705000 .67cd.80 .74 .70 8 .78 .71 .67max. .65 .77 .71 .67 9 .76 .69 .65 .62 .75 .69 .65 10 .73 .67 0° .63 .60 .73 .67 .63

0 50 Center 30 20 Beam 50 FC 30 .88 .97 .97 .97 .93 .93 561.93.90 .89 .843.0’ .93 .92 .90 .806.0’ .89 .86 .84 140.48.86 .84 .77 .85 .82 .80 .83 .80 62.44.80 .77 .749.0’ .81 .78 .76 .71 35.12.77 .74 12.0’ .78 .75 .72 .68 .75 .72 .69 .74 .71 15.0’ .73 .69 .6722.48.72 .69 .66 .64 15.61.69 .66 18.0’ .70 .67 .64 .62 .68 .64 .62 .67 .64 Spread: 23.2° .65 .62 .60 0° .66 .62 .60

10 20 Beam 50 Width 30 20 .93 .90 .90 .90 1.2’.85 .88 1.2’ .87 .86 .83 2.5’ .84 .82 2.5’.81 .78 .81 .79 .77 3.7’.74 .75 3.7’ .78 .76 .72 4.9’ .75 .73 4.9’.71 .69 .73 .70 .68 6.1’ .66 6.1’ .71 .68 .66 .64 7.4’ .69 .66 7.4’.64 .62 .67 .64 .62 90° Spread: 23.1° .60 .65 .62 .60

0 0 .88 .84 .80 .76 .73 .70 .67 .65 .63 .61 .59

Coefficients Of Utilization

Code L171

1-3/4” 44mm

Illuminance at a Distance

RCCMount %:

Length (L) 70

Effective Floor Cavity Reflectance: 20%

Spacing (s) 50

Color 10

RW %: 70 50 30 0 70 50 30 0 50 30 20 50 30 20 50 30 20 0 RCR: 0 1.02 1.02 -1.02 1.02 1.00 1.00 1.00 .86 .95 .95 .95 .91 .91 .91 .88 .88 .88 .86 1 .98 .96 .94 .93 .96 .94 .93 .82 .91 .89 .88 .88 .87 .86 .85 .84 .83 .82 2 .94 .91 .88 .85 .92 .89 .87 .78 .872”.84 .83 .84 W27S = .82 .81 .82 .80 .79 .78 S2 = (51mm) 2 = 2’ 2700K, std CRI W = standard 3 .91 .86 .83 .80 .89 .85 .82 .75 .83 .80 .78 .81 .79 .77 .79 .77 .75 .74 (76mm) (23-13/16”/605mm) 3000K, std CRI wall4 bracket .87 .82 .78 .75 .86 .81 .78 .72S3 = .793”.76 .74 .78 W30S = .75 .73 .76 .74 .72 .71 5 .84 .78 .74 .71 .83 .78 .74 .69 .76 .73 .71 .75 .72 .70 .74 .71 .69 .68 between LEDs 4 = 4’ W35S = 3500K, std CRI E = extended 6 .81 .75 .71 .68 .80 .75 .71 .67 .73 .70 .68 .72 .69 .67 .71 .69 .67 .66 (47-5/8”/1210mm) 4100K, std CRI wall7 bracket .79 .72 .68 .66 .78 .72 .68 .64 .71 .68 .65 .70 W41S = .67 .65 .69 .66 .64 .63 .69 .65 .63 .68 .65 .63 .67 .64 .62 .61 8 .76 .70 .66 .63 .75 .69 .66 .62 W20H =.65 2000K, high.59 CRI 9 .74 .68 .64 .61 .73 .67 .63 .60 .66 .63 .61 .66 .63 .60 .62 .60 10 .72 .65 .62 .59 .71 .65 .61 .58 W30H = 3000K, high.58 CRI .64 .61 .59 .64 .61 .59 .63 .61 .58

Beam

S = spot (12°) N = narrow flood (30°)

6 = 6’ (1829mm) standard X = custom

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

Offset (Extended wall bracket only)

Lead Length

W20H has consistent binning that falls within 1.5 MacAdam ellipse.

Finish MP

6 = 6” (152mm) 12 = 12” (305mm) 18 = 18” (457mm) 24 = 24” (610mm)

MP = matte pewter

154 155

3 8

Image shows L200-6W30S-MA

L200

www.mplighting.com

3-7/8” 98mm

Application Desk or table illumination. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, plug-in driver (included).

9”-16” 229-406mm max.

Power Consumption 8W Dimming Dimmer switch mounted on base.

3” 76mm

Desk & Table Fixtures

1-3/4” 44mm

L200 6W Desk Lamp

Weight 3.71lbs (1.68kg). Material Anodized aluminum. RoHS compliant. 2-5/8” 67mm

Approval Dry locations. Approved to US and Canadian standards by CSA.

1-1/8” 29mm

See page 192 for explanation of symbols and IP ratings.

L200 120° 3000K Std 510 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

approx. 290 cd max.

45°

-0° -90°

Mount height: 1 ft Total LLF: 1

Wattage

Color

W30S

6 = 6 x 1W

10 20

0°

L200

5 fc

0 -45°

Code

90° 1

Lumen test results provided by LED chip manufacturer.

3-7/8” Sq. 98mm Sq.

W30S = 3000K, std CRI

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

156 157

Image shows L203-6W30S-MA

L203

www.mplighting.com

Application Desk or table illumination. Source 6 x 1W, 350mA LEDs Driver Remote 120V primary, plug-in driver (included).

2-1/8” 54mm

3” 76mm

Power Consumption 8W Dimming Dimmer switch mounted on base.

Desk & Table Fixtures

3-7/8” 98mm

3-3/8” 86mm

L203 6W Desk Lamp

Weight 3.71lbs (1.68kg). 16” 406mm

Material Anodized aluminum. RoHS compliant. Approval Dry locations. Approved to US and Canadian standards by CSA.

20 See page 192 for explanation of symbols and IP ratings.

29mm 1-1/8”

3-7/8” 98mm

L203 120° 3000K Std 510 lm

Polar Candela Distribution

Isofootcandle Plot

180°

-90°

approx. 290 cd max.

45°

-0° -90°

Mount height: 1 ft Total LLF: 1

Wattage

Color

W30S

6 = 6 x 1W

10 20

0°

L203

5 fc

0 -45°

Code

90° 1

Lumen test results provided by LED chip manufacturer.

3-7/8” 98mm

W30S = 3000K, std CRI

Finish -

MA MA = matte clear anodized

NOTE: Standard CRI has a value of 75~82 while high CRI has 92.

158 159

Hardware

Code RAL001

Length

Option

Low-Voltage Single Rail System - SR & SF

4 = 4’ (1219mm) 8 = 8’ (2438mm)

Single rail

S = straight C1 = curved 1

Code END001

5/8” 16mm

MC MC = matte chrome

Please specify.

5/8” 16mm

MC MC = matte chrome

Code

Stand-off

Used to cap end of rail.

1” 25mm

Finish -

Joined with joiners on page 162.

3/8” 10mm

Finish

End cap

SDF010

Finish

Ø1” Ø25mm

1’ from end and spacing 3’ on center suggested.

MC = matte chrome 2-1/8” 54mm

Code SDF011

Offset -

Stand-off

Option

S1 = swivel 1

Offset

For sloped ceiling applications.

1’ from end and spacing 3’ on center suggested. Field adjustable drop.

drop

Finish -

S1 = swivel

Ø1” Ø25mm

MC = matte chrome

Option

For sloped ceiling applications.

4 = 4” (101mm) 7 = 7” (178mm) X = custom

1’ from end and spacing 3’ on center suggested.

offset

Finish -

24 = 24” (610mm) X = custom

Ø1” Ø25mm

For sloped ceiling applications.

Code SDF013

MC MC = matte chrome

S1 = swivel

Drop

Stand-off

Finish -

4 = 4” (101mm) 7 = 7” (178mm) X = custom

Code SDF012

Option

MC MC = matte chrome

Ø1” Ø25mm offset

Ø1-3/8” Ø35mm

Used to support cross-connected single rail system.

Code SDF014

Drop

Option

24 = 24” (610mm) X = custom

S = swivel 1

Ø1” Ø25mm

Used to support cross-connected single rail system. Field adjustable drop.

MC = matte chrome drop

For sloped ceiling applications.

Ø1-3/8” Ø35mm

Code SDF015

Offset -

MC 12 = 12” (305mm) X = custom

Stand-off

1’ from end and spacing 3’ on center suggested.

Finish

MC = matte chrome

Ø1” Ø25mm

Low-Voltage Single Rail System - SR & SF

Stand-off

Finish

Hardware

www.mplighting.com

1-78” 48mm

offset

Code SDF016 Stand-off

Finish -

Wall flush Stand-off. 1’ from end and spacing 3’ on center suggested.

Ø1” Ø25mm

MC = matte chrome 1-3/8” 35mm

160 161

X = custom

Code

Finish -

Conductive Joiner

MC MC = matte chrome

Code

Sold in pairs.

1-1/8” 29mm

Sold in pairs.

1-1/4” 32mm

Finish -

Sold in pairs.

2-1/4” 57mm

Finish

Conductive Joiner

Ø1/8” Ø3mm

MC MC = matte chrome

Code

JON004

1-3/8” 35mm

C = conductive I = insulated

JON003

MC = matte chrome

Finish

Joiner

JON002

JON001

Ø1/4” Ø6mm

Low-Voltage Single Rail System - SR & SF

End feed

Sold in pairs.

Finish

°-3

END011

Lead Length

Hardware

Code

1” 25mm

MC MC = matte chrome

1-7/8” 48mm

Sold in pairs.

Code CPY010

Finish -

MC MC = matte chrome

2-3/8” 60mm

Code CPY011

Offset -

Canopy

4 = 4” (101mm) 7 = 7” (178mm) X = custom

Code CPY012

Finish

Canopy

MC MC = matte chrome

offset

Stem can be used as a support.

Used with remote transformer to power system. Mounts to standard octagonal box. Stem can be used as a support.

Offset -

Ø4-5/8” Ø117mm

Used with remote transformer to power system. Mounts to standard octagonal box.

Finish -

4 = 4” (101mm) 7 = 7” (178mm) X = custom

Ø4-5/8” Ø117mm

MC MC = matte chrome

offset

Used with 2 remote transformers to power 2 sections of system. A JON001-I joiner must be used between the 2 feeds to isolate and join rails together. Mounts to standard octagonal box.

Low-Voltage Single Rail System - SR & SF

Canopy

Ø4-5/8” Ø117mm

Hardware

www.mplighting.com

Stem cannot be used as a support.

Code CPY013 Canopy

Offset -

Finish -

15 = 15” (381mm) X = custom

Ø4-5/8” Ø117mm

MC MC = matte chrome cord

offset

Used with remote transformer to power system. Mounts to standard octagonal box. Also can be used as a power feed for wall mount or sloped ceiling applications. Cord cannot be used as a support

162 163

Hardware

Code CPY015

Offset -

Low-Voltage Single Rail System - SR & SF

12 = 12” (305mm) X = custom

Canopy

Used with remote transformer to power system. Mounts to standard octagonal box.

Finish MC MC = matte chrome

Stem can be used as a support.

Ø4-5/8” Ø117mm

2-1/8” 54mm

offset

Code CPY016

Finish -

Canopy

4-3/4” 121mm

MC = matte chrome

1-1/4” 32mm

Code CPY018

Wall Flush canopy. Used with remote transformer to power system. Mounts to single gang box.

3-1/8” 79mm

1-1/2” 38mm

This can be used as a support.

1-1/4” 32mm

Used with remote transformer to power system. Mounts to standard octagonal box.

Finish -

Canopy

Ø4-5/8” Ø117mm

MC = matte chrome

Feed cannot be used as a support.

Code SLD Surface Mount LED Driver

Mount

Wattage

100W

SR = single rail

100W = 100 watts

10-7/8” 276mm

offset

Dimming

OFFSET

Finish -

D = dimmable N = non-dimmable

1-3/4” 44mm

5-7/8” 149mm

S4 = 4” (101mm) stem S7 = 7” (178mm) stem SX = custom stem length F151 = 15” (381mm) flexible cord FX1 = custom flexible cord 1

MC MC = matte chrome

For sloped ceiling applications.

Surface Mounts to standard octagonal box. Used to power single circuit of system. 100% duty cycle. Integral push button circuit breaker. 120V-277V input. Comes with 24V LED driver power system (please specify). Also can be used as a power feed for wall mount or sloped ceiling applications, if flexible cord option is chosen1. Cord cannot be used as a support. Dry locations. Approved to US and Canadian standards by CSA.

Code RAL004

Length

Option

6 = 6’ (1829mm) 12 = 12’ (3658mm)

S = straight C1 = curved 1

Code END004

Code

Lead Length -

Joiner

Finish

MC = matte chrome 5/8” 16mm

Code

Finish -

C = conductive I = insulated

Stand-off

1-5/8” 41mm

4” 102mm

1-5/8” 41mm

5/8” 16mm

MC = matte chrome

Finish -

1-5/8” 41mm

2-3/4” 70mm

Lead Length

Joiner

SDF040

1/2” 13mm

Used to cap end of rail.

1” 25mm

C = conductive I = insulated

Code JON006

Please specify.

MC MC = matte chrome

Joined with joiners on page 165.

1/4” 6mm

Finish

End cap

JON005

MC MC = matte chrome

Aluminum, hand bendable, cuttable, separate neutral.

1-1/4” 32mm

Low-Voltage Dual Circuit Rail System - DC

Dual circuit rail

Finish

Hardware

www.mplighting.com

1’ from end and spacing 3’ on center suggested.

Ø1” Ø25mm

MC MC = matte chrome

2-3/4” 70mm

Code SDF041

Offset -

Code

Stand-off

Finish -

4 = 4” (101mm) 7 = 7” (178mm) X = custom

Stand-off

SDF042

Option

S = swivel 1

Option

Finish -

S = swivel 1

1’ from end and spacing 3’ on center suggested.

offset

For sloped ceiling applications.

Drop

24 = 24” (610mm) X = custom

MC MC = matte chrome

Ø1” Ø25mm

For sloped ceiling applications.

Ø1” Ø25mm

1’ from end and spacing 3’ on center suggested. Field adjustable drop.

MC = matte chrome drop

164 165

Hardware

Code SDF045

Offset -

Low-Voltage Dual Circuit Rail System - DC

12 = 12” (305mm) X = custom

Stand-off

1’ from end and spacing 3’ on center suggested.

Finish MC MC = matte chrome

Ø1” Ø25mm

2-1/2” 64mm

offset

Code CPY041

Offset -

Canopy

Finish -

4 = 4” (101mm) 7 = 7” (178mm) X = custom

Ø4-5/8” Ø117mm

offset

MC = matte chrome

Ø1-1/4” Ø32mm

Used with 1 remote transformer to power single circuit or 2 remote transformers to power 2 circuits of the dual circuit system. Mounts to standard octagonal box. Stem can be used as a support.

Code CPY043

Offset -

Canopy

Finish -

15 = 15” (381mm) X = custom

Ø4-5/8” Ø117mm

MC MC = matte chrome cord

offset

Used with remote transformer to power single circuit when a traditional solid power feed is not feasible. Mounts to standard octagonal box. Also can be used as a power feed for wall mount or sloped ceiling applications. Cord cannot be used as a support.

Code CPY044 Canopy

Offset -

Finish -

15 = 15” (381mm) X = custom

Ø4-5/8” Ø117mm

MC = matte chrome cord

offset

Used with remote transformer to power 2 circuits of the dual circuit system when a traditional solid power feed is not feasible. Mounts to standard octagonal box. Also can be used as a power feed for wall mount or sloped ceiling applications. Cord cannot be used as a support.

Code SLD

Wattage

100W

DC = dual circuit rail

100W = 100 watts

10-7/8” 276mm

offset

Dimming

OFFSET

Option

Finish -

D = dimmable N = non-dimmable

S4 = 4” (101mm) stem S7 = 7” (178mm) stem SX = custom stem length F151 = 15” (381mm) flexible cord FX1 = custom flexible cord

1-3/4” 44mm

5-7/8” 149mm

S = swivel 1

MC MC = matte chrome

For sloped ceiling applications.

Surface Mounts to standard octagonal box. Used to power single circuit of system. 100% duty cycle. Integral push button circuit breaker. 120V-277V input. Comes with 24V LED driver power system (please specify). Also can be used as a power feed for wall mount or sloped ceiling applications, if flexible cord option is chosen. Only feeds one circuit of dual circuit track. Cord cannot be used as a support. Dry locations. Approved to US and Canadian standards by CSA.

Low-Voltage Dual Circuit Rail System - DC

Surface Mount LED Driver

Mount

Hardware

www.mplighting.com

166 167

Hardware

Code SDF070

Finish -

Linear System

Wall Mount Bracket

Fixed angle wall mount bracket for use with L103, L104, and 3CT.

2-7/8” 73mm

Adjustable angle wall stand-off for use with L104, L106 and L111.

MC = matte chrome 3-1/8” 79mm

Code SDF071

2-3/4” 70mm

Finish -

Maximum angle ±100° from horizontal.

MC = matte chrome

Stand-off

2-1/2” 64mm

Code SLD

Wattage -

Surface Mount LED Driver

Dimming

OFFSET

100W

Finish -

100W = 100 watts

D = dimmable N = non-dimmable

S12 = 12” (305mm) stem SX = custom stem length F151 = 15” (381mm) flexible cord FX1 = custom flexible cord 1

10-7/8” 276mm

offset

For sloped ceiling applications. 1-3/4” 44mm

5-7/8” 149mm

MC MC = matte chrome

Sold in pairs.

Surface Mounts to standard octagonal box. For use with L103, L104, and L112. Used to power single circuit of system. 100% duty cycle. Integral push button circuit breaker. 120V-277V input. Comes with 24V LED driver. Also can be used as a power feed for wall mount or sloped ceiling applications, if flexible cord option is chosen. Stem or cord cannot be used as a support. Dry locations. Approved to US and Canadian standards by CSA.

Code CPY052

Drop -

Canopy

Finish -

12 = 12” (305mm) X = custom

Ø4-5/8” Ø117mm

For use with L112.

MC = matte chrome

drop

Code CPY053 Canopy

Drop -

Finish -

12 = 12” (305mm) X = custom

4-5/8” Sq. 117mm Sq.

MC = matte chrome

drop

For use with L112.

Code CPY054

Offset -

Ø4-5/8” Ø117mm

15 = 15” (381mm) X = custom

MC = matte chrome cord

offset

For use with L103, L104, and L111. Used with remote driver to power system. Mounts to standard octagonal box. Also can be used as a power feed for wall mount or sloped ceiling applications.

Linear System

Canopy

Finish

Hardware

www.mplighting.com

Cord cannot be used as a support Code CPY055

Offset -

Canopy

Finish -

Sq.4-5/8” Sq.117mm

MC MC = matte chrome

15 = 15” (381mm) X = custom

cord

Code SDF060

Drop -

Stand-off

SDF061

ø1” ø25mm

drop

Option

Finish -

Drop

For sloped ceiling applications.

Ø1/4” rod suspension set for use with L103, L104, and 3CT.

offset

Finish -

24 = 24” (610mm) X = custom

ø1” ø25mm

MC = matte chrome

S = swivel

12 = 12” (305mm) X = custom

Cable suspension set for use with L103, L104, and 3CT.

MC = matte chrome

Code

Stand-off

Offset

Stand-off

SDF062

Finish

24 = 24” (610mm) X = custom

Code

offset

ø1-1/8” ø29mm

Cable suspension set for use with L111.

MC = matte chrome drop

168 169

Hardware

Code SDF063

Offset

Linear System & LED Driver Enclosures

S = swivel For sloped ceiling applications.

Option

Finish -

S1 = swivel

12 = 12” (305mm) X = custom

Ø7/16” rod suspension set for use with L111.

MC = matte chrome

For sloped ceiling applications.

Finish -

24 = 24” (610mm) X = custom

ø1-1/8” ø29mm

offset 1

Drop -

Ø1/4” rod suspension set for use with L111.

offset 1

Code

ø1-1/8” ø29mm

MC = matte chrome

Offset

Stand-off

12 = 12” (305mm) X = custom

Code

SDF065

Finish

Stand-off

SDF064

Option

Ø1-1/8” Ø29mm

MC = matte chrome drop

Cable suspension set for use with L112.

Code 3CT

Length -

1-3/8” 35mm

04 = 4’ (1219mm) 08 = 8’ (2438mm) 12 = 12’ (3658mm)

BK = black S = silver

1-1/4” 32mm

3CTPWB Power Wire Bending Tool

Code

Finish -

End Cap

Finish -

Live End Feed

Finish -

Live End Feed Reverse Polarity

Finish

BK = black S = silver

Code

Live Middle Feed

2” 51mm

Straight Line Coupler

3CT401

2” 51mm

BK = black S = silver

Code 3CT301

1/8” 3mm

BK = black S = silver

Code 3CT202

1-1/4” 32mm

BK = black S = silver

Code 3CT201

Joined with connectors on page 172-173.

After the track has been cut to the desired length, the conductors have to be bent at a 90° angle using 3CTPWB tool.

Code

3CT101

Tracks can be field cut and joined together.

3 Circuit Track - 3CT

3CT Track

Finish

Hardware

www.mplighting.com

Finish BK = black S = silver

3-7/8” 98mm

Note: Red line shows polarity.

170 171

Hardware

Code 3CT501

Finish -

3 Circuit Track - 3CT

BK = black S = silver

Feedable L-Connector Outside

Code 3CT502

BK = black S = silver

Finish

BK = black S = silver

Code

BK = black S = silver

2-5/8” 67mm

1-3/8” 35mm

Finish -

Feedable T-Connector Inside Right

BK = black S = silver

Code

1-3/8” 35mm

2-5/8” 67mm 3-7/8” 98mm

Finish -

Feedable T-Connector Inside Left

BK = black S = silver

1-3/8” 35mm

2-5/8” 67mm 3-7/8” 98mm

Code

Feedable X-Connector

1-3/8” 35mm

3-7/8” 98mm

Code

3CT701

2-5/8” 67mm

Finish

Feedable T-Connector Outside Left

3CT604

3-7/8” 98mm

Feedable T-Connector Outside Right

3CT603

2-5/8” 67mm

Code

3CT602

2-5/8” 67mm

Finish

Feedable L-Connector Inside

3CT601

2-5/8” 67mm

Finish -

1-3/8” 35mm

BK = black S = silver

Note: Red line shows polarity.

3-7/8” 98mm

Code 3CT801

Code -

BK = black S = silver

Code

1-1/8” 29mm

BK = black S = silver

1/2” 13mm 1-1/4” 32mm

Finish 3/4” 19mm

T-Bar Ceiling Clamp

BK = black S = silver

Code

Option

Finish -

12 = 12” (305mm) X = custom

Code

S1 = swivel 1

MC = matte chrome

S = swivel 1

For sloped ceiling applications.

offset

Finish -

Ø7/16” rod. For use with 3CT.

ø7/16” ø12mm

Option

ø4-5/8” ø117mm

For sloped ceiling applications.

Offset

12 = 12” (305mm) X = custom

1/2” 13mm 1-1/4” 32mm

Offset

Canopy

1-1/4” 32mm

Finish

Code

CPY051

1/2” 13mm

BK = black S = silver

Recessed T-Bar Ceiling Clamp

CPY050

1” 25mm

Code

3CT1202

2” 51mm

Finish

Ceiling Clamp

3CT1201

Cannot be used to feed track.

Finish

Flexible Connector

3CT1001

2” 51mm

BK = black S = silver

3 Circuit Track - 3CT

Adjustable Connector

3CT901

Cannot be used to feed track.

Finish

Hardware

www.mplighting.com

4-5/8” Sq. 117mm Sq.

MC MC = matte chrome

Ø7/16” rod. For use with 3CT.

offset ø7/16” ø12mm

Note: Red line shows polarity.

172 173

Hardware

Code SDF070

Finish -

3 Circuit Track - 3CT

Wall Mount Bracket

MC = matte chrome BK = black

Code 3CT3001

BK = black S = silver

Drop -

Stand-off

Finish -

ø1” ø25mm

drop

Offset

Option

Finish -

12 = 12” (305mm) X = custom

Cable suspension set for use with L103, L104, and 3CT.

MC = matte chrome

24 = 24” (610mm) X = custom

Code

Stand-off

Track adapter will come automatically with fixture.

Code

SDF061

Fixed angle wall mount bracket.

3-1/8” 79mm

Finish

Replacement Track Adapter

SDF060

2-3/4” 70mm

S = swivel 1

ø1” ø25mm

MC = matte chrome offset

For sloped ceiling applications.

Ø1/4” rod suspension set for use with L103, L104, and 3CT.

ACCS-SH Metal Shroud

3/4” 19mm

For use with L221 & L222. Can use Shroud with up to two lenses.

Accessories

www.mplighting.com

Ø1-31/32 Ø50mm

ACCS-SHB Metal Shroud, Black

ACCS-BE Beam Elongator Ø1-31/32 Ø50mm

For use with L221 & L222. Can use up to two lenses plus shroud.

ACCS-CS Crystal Spreader

ACCS-MS Mistlite Spreader

ACCS-ELB Eggcrate Louver, Black

Holder is extra.

ACCS-LH Lens Holder

ACCS-LM Louver, matte anodized ACCS-LB Louver, black anodized

1/4” 6mm

For use with L01~L04.

Ø1-3/8” Ø35mm

174 175

Drivers

LED8W350i DIMMABLE Code

Features Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120V ~ 240V, 60Hz DC Output Voltage 3 ~ 24V DC

Dimmable

DC Output Current 350mA Constant Current Output Wattage 8W Max Dimming Function Yes (0~10V Dimming) Operating Temperature -20 ~ 50°C (-4 ~ 122°F) Weight 200g (0.41 lbs)

Constant Current

Dimensions L 2-3/8” (60mm), W 2-3/8” (60mm), H 1-1/4” (32mm) L 3-1/8” (79mm), W 1-1/2” (38mm). 7/8” (22mm)

Recommended Use 1-6 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

LED20W700i DIMMABLE Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120V, 60Hz DC Output Voltage 5.6 ~ 24V DC DC Output Current 700mA Constant Current Output Wattage 20W Max Dimming Function Yes (0~10V Dimming) Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 272g (0.60 lbs) Dimensions L 3” (76mm), W 3-1/4” (83mm), H 1-3/8” (35mm)

Constant Current

Approval Damp and dry locations. Approved to US and Canadian standards by CSA.

Recommended Use 2-6 x 2.5W LEDs

LED25W1050i DIMMABLE Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120V, 60Hz DC Output Voltage 5.6 ~ 24V DC DC Output Current 1.05A Constant Current Output Wattage 25.2W Max Dimming Function Yes (0~10V Dimming) Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 159g (0.35 lbs)

Constant Current

Dimensions L 3” (76mm), W 3-1/4” (83mm), H 1-3/8” (35mm)

Recommended Use 12, 15, or 18 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

TLDDLV60W5000 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. Multiple voltage from 120 to 277 volts. Tight regulated output (1% line, 5% load) to maximize LED performance.

Drivers

www.mplighting.com

AC Input Voltage 120 ~ 277V, 50/60Hz DC Output Voltage 12V Constant Voltage

Output Wattage 60W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -40 ~ 60°C (-40 ~ 140°F)

Dimmable

DC Output Current 0.1 ~ 5.00A Max

Weight 635g (1.40 lbs) Dimensions L 9-3/8” (238mm), W 1-3/4” (44mm), H 1-1/4” (32mm)

Constant Voltage

Approval Outdoor Rated. Approved to US and Canadian standards by CSA.

Recommended Use 2-12 x 3W fixtures 66

TLDDLV100W4100 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. Multiple voltage from 120 to 277 volts. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120 ~ 277V, 50/60Hz DC Output Voltage 24V Constant Voltage DC Output Current 0.1 ~ 4.10A Max Output Wattage 100W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 635g (1.40 lbs)

Constant Voltage

Dimensions L 9-3/8” (238mm), W 1-3/4” (44mm), H 1-1/4” (32mm)

Recommended Use 2-6 L72 or linear fixtures

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 66

TLDAV60W9 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. 9V (factory set) constant voltage output to maximize LED performance and life. AC Input Voltage 100V ~ 240V, 47~63Hz DC Output Voltage 8.7V ~ 10.5V Constant Voltage DC Output Current 0 ~ 5A Output Wattage 60W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -20 ~ 60°C (-4 ~ 140°F)

Constant Voltage

Weight 400g (0.88 lbs)

Recommended Use 2-12 x 3W fixtures and 1-6 x 7W fixtures

Dimensions L 7-1/8” (181mm), W 2-3/8” (61mm), H 1-3/8” (35mm) Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64 Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

176 177

Drivers

TLDAV60W12 DIMMABLE with TLC010i Code

Dimmable

DC Output Current 0 ~ 5A Output Wattage 60W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -20 ~ 60°C (-4 ~ 140°F)

Constant Voltage

Weight 400g (0.88 lbs)

Recommended Use 2-12 x 3W fixtures and 2-6 x 7W fixtures

Dimensions L 7-1/8” (181mm), W 2-3/8” (61mm), H 1-3/8” (35mm) Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64

TLDAV100W12 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. 12V (factory set) constant voltage output to maximize LED performance and life. AC Input Voltage 100V ~ 240V, 47~63Hz DC Output Voltage 10.2V ~ 12V Constant Voltage DC Output Current 3.75A ~ 5A Output Wattage 60W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -30 ~ 50°C (-22 ~ 122°F) Weight 520g (1.15 lbs)

Constant Voltage

Dimensions L 7-7/8” (200mm), W 2-3/4” (70mm), H 1-3/8” (35mm)

Recommended Use 2-8 x 7W fixtures

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64

TLDAV100W15 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. 15V (factory set) constant voltage output to maximize LED performance and life. AC Input Voltage 100V ~ 277V, 47~63Hz DC Output Voltage 12.8V ~ 15V Constant Voltage DC Output Current 3.75A ~ 5A Output Wattage 75W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -30 ~ 50°C (-22 ~ 122°F) Weight 520g (1.15 lbs)

Constant Voltage

Dimensions L 7-7/8” (200mm), W 2-3/4” (70mm), H 1-3/8” (35mm)

Recommended Use 1-6 x 10W fixtures and 1-18 x 4W fixtures

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64 Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

TLDAV100W20 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. 20V (factory set) constant voltage output to maximize LED performance and life.

Drivers

www.mplighting.com

AC Input Voltage 100V ~ 277V, 47~63Hz DC Output Voltage 17V ~ 20V Constant Voltage

Output Wattage 96W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -30 ~ 50°C (-22 ~ 122°F)

Constant Voltage

Weight 520g (1.15 lbs)

Recommended Use L72, L73, L76, L96, L98, L99, and linear systems

Dimensions L 7-7/8” (200mm), W 2-3/4” (70mm), H 1-3/8” (35mm)

Dimmable

DC Output Current 3.6A ~ 4.8A

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64

TLDAV100W24 DIMMABLE with TLC010i Code

Features UL Class 2, limited output and current with isolation for safe operation. 24V (factory set) constant voltage output to maximize LED performance and life. AC Input Voltage 100V ~ 277V, 47~63Hz DC Output Voltage 20.4V ~ 24V Constant Voltage DC Output Current 3A ~ 4A Output Wattage 96W Max Dimming Function With TLC010i Dimming Controller (sold separately) Operating Temperature -30 ~ 50°C (-22 ~ 122°F) Weight 520g (1.15 lbs)

Constant Voltage

Dimensions L 7-7/8” (200mm), W 2-3/4” (70mm), H 1-3/8” (35mm)

Recommended Use L72, L73, L76, L96, L98, L99, and linear systems

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 64

TLC010i Dimming

Features UL Class 2, designed for dimmable drivers. Pulse Width Modulation (PWM) Dimming. Provides 0-10V Dimming control. UL Outdoor Damp location rated, IP66. Fully potted for moisture resistance.

Controller

Input Voltage Range 12 ~ 24 V DC

Code

DC Output Voltage 12 ~ 24 V DC DC Output Current 5000mA Max at 12V. 4100mA Max at 24V Dimming Control 0-10V Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 136g (0.30 lbs) Dimensions L 5-1/8” (130mm), W 1-3/8” (35mm), H 1” (25mm) Recommended Use Dimming module for use with 12V or 24V constant voltage drivers.

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 66

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

178 179

Drivers

LED3W350L Code

Non-Dimmable

DC Output Current 350mA Constant Current Output Wattage 3.5W Max Dimming Function No Operating Temperature -20 ~ 60°C (-4 ~ 140°F) Weight 89.5g (0.20 lbs)

Constant Current

Dimensions L 2-5/8” (67mm), W 1-3/8” (35mm), H 7/8” (22mm)

Recommended Use 1-2 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

LED8W350L Code

Features Compact size that maximizes design flexibility. 110, 220, 240 full range AC input. Tight regulated constant current output to maximize LED performance. AC Input Voltage 100 ~ 240V, 50/60Hz DC Output Voltage 3 ~ 36V DC DC Output Current 350mA Constant Current Output Wattage 12W Max Dimming Function No Operating Temperature -20 ~ 60°C (-4 ~ 140°F) Weight 89.5g (0.20 lbs)

Constant Current

Dimensions L 2-5/8” (67mm), W 1-3/8” (35mm), H 7/8” (22mm)

Recommended Use 2-7 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

LED9W700L Code

Features Compact size that maximizes design flexibility. 110, 220, 240 full range AC input. Tight regulated constant current output to maximize LED performance. AC Input Voltage 100 ~ 240V, 50/60Hz DC Output Voltage 3 ~ 21V DC DC Output Current 700mA Constant Current Output Wattage 9W Max Dimming Function No Operating Temperature -10 ~ 40°C (14 ~ 104°F) Weight 89.5g (0.20 lbs)

Constant Current

Dimensions L 2-5/8” (67mm), W 1-3/8” (35mm), H 7/8” (22mm)

Recommended Use 1-3 x 2.5W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

LED10W350D Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance.

Drivers

www.mplighting.com

AC Input Voltage 120V, 60Hz DC Output Voltage 2.8 ~ 28V DC

Output Wattage 10W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 136g (0.30 lbs)

Constant Current

Dimensions L 5-1/8” (130mm), W 1-3/8” (35mm), H 1” (25mm)

Recommended Use 2-7 x 1W LEDs

Approval Outdoor Rated. Approved to US and Canadian standards by CSA.

Non-Dimmable

DC Output Current 350mA Constant Current

LED12W350 Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120V, 60Hz DC Output Voltage 2.6 ~ 32.8V DC DC Output Current 350mA Constant Current Output Wattage 12W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 68g (0.15 lbs)

Constant Current

Dimensions L 5-1/4” (133mm), W 1-1/8” (29mm), H 7/8” (22mm)

Recommended Use 2-8 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

LED17W700D

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED Code performance. AC Input Voltage 120V, 60Hz DC Output Voltage 7.8 ~ 24.6V DC DC Output Current 700mA Constant Current Output Wattage 17W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 136g (0.30 lbs)

Constant Current

Dimensions L 5-1/8” (130mm), W 1-3/8” (35mm), H 1” (25mm)

Recommended Use 2-6 x 2.5W LEDs

Approval Outdoor rated. Approved to US and Canadian standards by CSA. 66 Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

180 181

Drivers

LED25W1050 Code

Non-Dimmable

DC Output Current 1.05A Constant Current Output Wattage 25.2W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 159g (0.35 lbs)

Constant Current

Dimensions L 3” (76mm), W 3-1/4” (83mm), H 1-3/8” (35mm)

Recommended Use 9, 12, 15, or 18 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

LED40W1750 Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance. AC Input Voltage 120V, 60Hz DC Output Voltage 5.6 ~ 24V DC DC Output Current 1.75A Constant Current Output Wattage 40W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 272g (0.60 lbs)

Constant Current

Dimensions L 3” (76mm), W 3-1/4” (83mm), H 1-3/8” (35mm)

Recommended Use 15, 20, 25 or 30 x 1W LEDs

Approval Dry locations. Approved to US and Canadian standards by CSA.

TLDDLV6V6W1 Code

Features Compact size that maximizes design flexibility. 110, 220, 240 full range AC input. Tight regulated constant current output to maximize LED performance. AC Input Voltage 100 ~ 240V, 50/60Hz DC Output Voltage 6V Constant Voltage DC Output Current 0.02 ~ 1.00A Max Output Wattage 6W Max Dimming Function No Operating Temperature -20 ~ 60°C (-4 ~ 140°F) Weight 89.5g (0.20 lbs)

Constant Voltage

Dimensions L 2-5/8” (67mm), W 1-3/8” (35mm), H 7/8” (22mm)

Recommended Use L06 and L07 only

Approval Dry locations. Approved to US and Canadian standards by CSA.

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

TLD12012V12W1 Code

Features UL Class 2, limited output and current with isolation for safe operation. Tight regulated output (1% line, 5% load) to maximize LED performance.

Drivers

www.mplighting.com

AC Input Voltage 120V, 50/60Hz DC Output Voltage 12V Constant Voltage

Non-Dimmable

DC Output Current 0.35 ~ 1.00A Max Output Wattage 12W Max Dimming Function No Operating Temperature -40 ~ 60°C (-40 ~ 140°F) Weight 136g (0.30 lbs)

Constant Voltage

Dimensions L 5-1/8” (130mm), W 1-3/8” (35mm), H 1” (25mm)

Recommended Use 2 x 3W fixtures

Approval Outdoor Rated. Approved to US and Canadian standards by CSA. 66

Code

Usage LED driver enclosures Finish Zinc plated Dimensions L 6-1/4” (160mm), W 5” (130mm), H 2” (51mm) Approval Dry locations.

5” 130mm

6-1/4” 160mm

EBX-260-ZP Code

Driver Enclosures

EBX-160-ZP

2” 51mm

Usage LED driver enclosures Finish Zinc plated Dimensions L 10-1/4” (260mm), W 5” (130mm), H 2-3/4” (71mm) Approval Dry locations.

5” 130mm

10-1/4” 260mm

2-3/4” 71mm

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

182 183

Magnetic Low Voltage Transformers

TLW120M10 Code

Features Hard wired remote transformer. Dimmable with Magnetic Low Voltage Dimmers (ie. Lutron Diva). AC Input Voltage 120V, 60Hz AC Output Voltage 12V Output Wattage 10W Max Power Factor 95% Typical Efficiency 95% Dimming Function Yes (with Magnetic Low Voltage Dimmers) Operating Temperature -10 ~ 50°C (14 ~ 122°F) Weight 1.8kg (4 lbs) Dimensions Ø2-1/2” x 1-1/4” Approval Dry locations.

TLW120M300 Code

Features Comes with 6’ plug-in cord that can be field cut and hard wired. Dimmable with Magnetic Low Voltage Dimmers (ie. Lutron Diva). Integral push button circuit breaker. AC Input Voltage 120V, 60Hz AC Output Voltage 12V Output Wattage 300W Max Power Factor 95% Typical Efficiency 80% Dimming Function Yes (with Magnetic Low Voltage Dimmers) Operating Temperature -10 ~ 50°C (14 ~ 122°F) Weight 3.6kg (8 lbs) Dimensions L 5-1/4” (133mm), W 3-1/2” (89mm), H 3-1/4” (83mm) Approval Dry locations. Approved to UL by CSA/CUS.

TLW120MT150 TLW120MT300 Code

TLW277MT300 Code

Features Hard wired remote transformer. Dimmable with Magnetic Low Voltage Dimmers (ie. Lutron Diva). Integral push button circuit breaker. AC Input Voltage 277V, 60Hz AC Output Voltage 12V Output Wattage 300W Max Power Factor 95% Typical Efficiency 93% Dimming Function Yes (with Magnetic Low Voltage Dimmers) Operating Temperature -10 ~ 50°C (14 ~ 122°F) Weight 3.2kg (7 lbs) Dimensions L 3-1/8” (79mm), W 3-3/8” (86mm), H 7-1/8” (181mm) Approval Dry locations. UL Listed.

TLW120MT600 TLW277MT600 Code

Features Hard wired remote transformer. Dimmable with Magnetic Low Voltage Dimmers (ie. Lutron Diva). Integral push button circuit breaker. AC Input Voltage 120V / 277V, 60Hz

Magnetic Low Voltage Transformers

www.mplighting.com

AC Output Voltage 12V or 24V Output Wattage 600W Max Power Factor 98% Typical Efficiency 95% Dimming Function Yes (with Magnetic Low Voltage Dimmers) Operating Temperature -10 ~ 50°C (14 ~ 122°F) Weight 5.9kg (13 lbs) Dimensions L 4” (102mm), W 4-3/4” (121mm), H 7-7/8” (200mm) Approval Dry locations. UL Listed.

184

Recommended Driver Chart The following chart lists the recommended LED driver and fixture configurations to ensure optimal product performance and longevity. Simply locate the MP Lighting product from the left hand side of the chart to determine the recommended driver and fixture configuration. For example, the dimmable driver LED8W350i will perform best when used with 1-6 x 1W LED fixtures. Please note that the chart represents the most common applications; consult the online Recommended Drivers for LED Fixtures Tool for all other options. Drivers • All drivers must be de-rated by 30% • 350mA drivers must be used with 1W LEDs • 700mA drivers must be used with 2.5W LEDs Dimmable Drivers • Products are dimmable when a dimmable driver is specified • Dimmable drivers work on 0-10V dimming systems • Constant voltage drivers require dimming module #TLC010i

Constant Current

Constant Voltage

LED8W350i

LED20W700i

TLDAV60W9 + TLC010i

TLDAV60W12 + TLC010i

TLDAV100W15 + TLC010i

TLDAV100W20 + TLC010i

TLDAV100W24 + TLC010i

TLDAV100W4100 + TLC010i

L01 / L04

1W (1-6 fixtures)

2.5W (2-6 fixtures)

L02

1W (1-6 fixtures)

2.5W (2-6 fixtures)

L03

1W (1-6 fixtures)

2.5W (2-6 fixtures)

3 x 1W (1-2 fixtures)

3 x 2.5W (1-2 fixtures)

3 x 1W (1-12 fixtures), 3 x 2.5W (1-6 fixtures)

1W (1-6 fixtures)

2.5W (2-6 fixtures)

2 x 1W (1-3 fixtures)

2 x 2.5W (1-3 fixtures)

L21 / L22

1W (1-6 fixtures)

2.5W (2-6 fixtures)

L31 / L32 / L33 / L34

1W (1-6 fixtures)

2.5W (2-6 fixtures)

L05 L11 / L13/ L14 / L16 /L18 L12 / L15 / L17 / L19

L35 / L36 / L37 L51 / L52 L55 / L56 / L57 L58 / L64 / L65

3.5W (2-12 fixtures), 6.5W (1-6 fixtures)

1W (1-6 fixtures)

2.5W (2-6 fixtures)

3 x 1W (1-2 fixtures)

3 x 1W (1-12 fixtures)

2.5W (2-6 fixtures)

L59

3.7W (1 fixture ONLY)

3.7W (2-10 fixtures)

L62

3.2W (1 fixture ONLY)

3.2W (2-10 fixtures)

L72 (24V DC)

12 x 1W (1 fixture ONLY)

12 x 1W (1-6 fixtures)

L73 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

4 x 2.5W (1 fixture ONLY)

4 x 2.5W (1-6 fixtures)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L81

1W (1-6 fixtures)

2.5W (2-6 fixtures)

L85

3.5W (2-12 fixtures)

L91 / L92

2.5W (2-6 fixtures)

L76 (24V DC)

L96

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L97 / L97E / L98

6 x 1W (1 fixture ONLY)

6 x 2.5W (1 fixture ONLY)

6 x 1W (1-12 fixtures), 6 x 2.5W (1-5 fixtures)

L99

12 x 1W (1 fixture ONLY)

12 x 1W (1-6 fixtures), 12 x 2.5W (1-2 fixtures)

L101 / L103 / L104 / L106

1W, S2 (12ft max.), S3 (18ft max.)

L102

0.07W, S28 (32ft max.), S56 (18ft max.)

L111

1W, S1 (6ft max.), S2 (8ft max.)

L112

2.5W, 4ft (1 driver needed) 2.5W, 8ft (2 drivers needed)

L121

0.07W, S1 (32ft max.), S2 (18ft max.), S3 (9ft max.)

L130 / L131

3 x 2.5 (1-6 fixtures)

L134

4 x 1W (1 fixture ONLY)

4 x 1W (1-18 fixtures), 4 x 2.5W (1-6 fixtures)

L135

4.5W (1 fixture ONLY)

9W (1-4 fixtures)

L141

13W (1-4 fixtures)

L142

9W (1-4 fixtures)

L151

3 x 1W (1-2 fixtures)

3 x 1W (1-12 fixtures)

L161

1W, 2" Spacing, 12ft max.

L171

1W, S2 (12ft max.), S3 (18ft max.)

L181

1W per arm (1-6 arms)

L191

0.07W, 2' (1 fixture ONLY)

0.07W, 4' (1 fixture ONLY)

0.07W, 2' (2-8 fixtures)

0.07W, 4' (2-4 fixtures)

6 x 1W (1-12 fixtures)

L221

4 x 1W (1 fixture ONLY)

4 x 2.5W (1 fixture ONLY)

4 x 1W (1-18 fixtures), 4 x 2.5W (1-6 fixtures)

L222 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L223 (24V DC)

7 x 2.5W (1 fixture ONLY)

7 x 2.5W (1-4 fixtures)

G02L / G03L

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

P71L / P81L / P82L (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L201 / L202

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

Dimmable

L75

Recommended Driver Chart

www.mplighting.com

186 188

Recommended Driver Chart

www.mplighting.com

Constant Current

Constant Voltage

Non-Dimmable

LED3W350L

LED8W350L

LED9W700L

LED10W350D

LED17W700D

LED20W700i

TLDDLV6V6W1

TLDAV60W9

TLDAV60W12

TLDAV100W15

TLDAV100W24

TLDAV100W4100

L01 / L04

1W (1-2 fixtures)

2.5W (1-3 fixtures)

1W (2-7 fixtures)

2.5W (2-6 fixtures)

L02

1W (1-2 fixtures)

1W (2-7 fixtures)

2.5W (1-3 fixtures)

2.5W (2-6 fixtures)

L03

1W (1-2 fixtures)

2.5W (1-3 fixtures)

1W (2-7 fixtures)

2.5W (2-6 fixtures)

L05

3W (1-2 fixtures)

3 x 2.5W (1-2 fixtures)

3.5W (2-12 fixtures), 7.5W (1-6 fixtures)

L06 / L07

0.1W (1-50 fixtures)

L51 / L52

1W (1-2 fixtures)

1W (2-7 fixtures)

2.5W (1-3 fixtures)

2.5W (2-6 fixtures)

L55 / L56 / L57

3 x 1W (1-2 fixtures)

3 x 1W (2-12 fixtures)

L58 / L64 / L65

2.5W (1-3 fixtures)

2.5W (2-6 fixtures)

L59

3.7W (1-2 fixtures)

3.7W (2-10 fixture)

L62

3.2W (1-2 fixtures)

3.2W (2-10 fixtures)

L72 (24V DC)

12 x 1W (1 fixture ONLY)

12 x 1W (1-6 fixtures)

L73 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L75

4 x 2.5W (1 fixture ONLY)

4 x 2.5W (1-6 fixtures)

L76 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L81

1W (1-2 fixtures)

1W (2-7 fixtures)

2.5W (1-3 fixtures)

2.5W (2-6 fixtures)

L85

3.5W (1 fixture ONLY)

3.5W (2-12 fixtures)

L96 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L97 / L97E / L98

6 x 1W (1 fixture ONLY)

6 x 2.5W (1 fixture ONLY)

L99

12 x 1W (1 fixture ONLY)

L101 / L103 / L104 / L106

L102

L121

L151

3 x 1W (1-2 fixtures)

3 x 1W (2-12 fixtures)

L161

1W, 2" Spacing, 12ft max.

L171

1W, S2 (12ft max.), S3 (18ft max.)

L181

1W per arm (2-7 fixtures)

191

L191

0.07W, 2' (1 fixture ONLY)

0.07W, 4' (1 fixture ONLY)

0.07W, 2' (2-8 fixtures), 0.07W, 4' (2-4 fixtures)

L202

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L221

4 x 1W (1 fixture ONLY)

4 x 2.5W (1 fixture ONLY)

4 x 1W (1-18 fixtures), 4 x 2.5W (1-6 fixtures)

L222 (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

L223 (24V DC)

7 x 2.5W (1 fixture ONLY)

7 x 2.5W (1-4 fixtures)

G02L / G03L

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

P71L / P81L / P82L (24V DC)

6 x 1W (1 fixture ONLY)

6 x 1W (1-12 fixtures)

Note: All drivers must be de-rated by 30%. For other configurations consult Recommended Drivers for LED Fixtures Tool online. http://mplighting.com/tools/FixtureToDriver/FixtureRecomDrivers.aspx

189

6 x 1W (1-12 fixtures), 6 x 2.5W (1-5 fixtures) 12 x 1W (1-6 fixture), 12 x 2.5W (1-2 fixture) 1W, S2 (12ft max.), S3 (18ft max.) 0.07W, S28 (32ft max.) S56 (18ft max.) 0.07W, S28 (32ft max.), S56 (18ft max.), S112 (9ft max.)

Lamp Index - LED The following technical data illustrates the attributes of our various LED sources. For more details refer to the IES files available through our website.

Source (W)

Current (mA)

0.07

0.1

0.5

CRI

Color Temp. (K)

Luminous Flux (lm)

2200

4.3

2700

4.6

3000

4.6

2700

1.3~3.8

2700

21.4~36

3000

21.4~36

3500

21.4~36

4100

21.4~36

2700

70~100

3000

70~100

3500

80~110

4100

80~110

2000

28.4~46.2

3000

60~100

2700

110~185

3000

125~200

3500

140~215

4100

140~215

2000

42.5

3000

95~170

3000

232

150

75 1

350 85

75 2.5

700 85

3.2

350

4100

255

3.5

350

3000

250

3.7

350

3000

200~280

4.5

350

3000

280~320

6.5

700

5000

720

3000

475

4100

560~648

3000

490~560

3000

960

5000

1110

9.5

700

Lamp Index & Isofootcandle Calculation

www.mplighting.com

Note: Due to the variation in LED manufacturing processes, the listed values of LED parameters are provided for guidance only.

Height Conversion Formula Polar Candela Distribution L18 1W, 30° 180° 3000K Std Height² Step85 1 lm Existing Mounting -90° 90° = Correction Factor New Mounting Height²

Isofootcandle Plot 2 0 1

Step 2

Correction Factor x Footcandle = New Mounting Height FC

approx. 45° Note: Information is based on the most current data available; however, various operating -0° 275 cd factors such as reflectances and application type may cause differences between lab and max. -90° -45°

field results. Due to continuous improvements, specifications may change without notice. Consult www.mplighting.com for the most current information. 0°

20 10 0.5 0.1 fc

3 4 5

Mount height: 1 ft Total LLF: 1

190 191

Explanation of Symbols

Legend

Ingress Protection (IP) Rating System

Indoor/Dry Rated A dry rated location is an area, generally indoors, which is protected from exposure to excessive moisture and water.

This system provides a means of classifying the degrees of protection from dust and water afforded by electrical equipment and enclosures.

Outdoor - Damp Rated Damp rated locations are sheltered, outdoor areas that are protected from direct contact with rain, etc.

First Digit indicates the level of protection against solid objects. Level Protected Against

Effective Against

Outdoor - Wet Rated Wet rated locations are unsheltered, outdoor areas that are exposed to direct contact with rain, etc.

—

No protection against contact and ingress of objects.

Ceiling Fixture Suitable for ceiling applications.

>2” (50mm) object size

Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part.

>1/2 ” (12.5mm) object size Fingers or similar objects.

>3/32” (2.5mm) object size Tools, thick wires, etc.

>1/32” (1mm) object size

Most wires, screws, etc.

Dust protected

Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment; complete protection against contact.

Dust tight

No ingress of dust; complete protection against contact.

Floor Fixture Suitable for floor applications.

Wall Fixture Suitable for wall applications.

Insulated Ceiling Fixture

Non-Insulated Ceiling Fixture

Submersible Fixture Suitable for underwater applications.

Second Digit indicates the level of protection against liquids.

Rail System Fixture can be mounted to MP rail systems. (See pages 136-143 for hardware options).

Level Protected Against

Details

Linear System Fixture can be ceiling or wall mounted as part of a linear system application. (See pages 144-146 for hardware options).

Not protected

—

Dripping water

Dripping water (vertically falling drops) shall have no harmful effect.

Cabinet Mounted Fixture Suitable for showcase, kitchen cabinet and millwork applications.

Dripping water when tilted up to 15°

Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.

Spraying water

Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.

Splashing water

Water splashing against the enclosure from any direction shall have no harmful effect.

Water jets

Water projected by a nozzle against enclosure from any direction shall have no harmful effects.

Powerful water jets

Water projected in powerful jets against the enclosure from any direction shall have no harmful effects.

Immersion up to 3’-15/16” (1m)

Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 3’-15/16” (1m) of submersion).

Immersion beyond 3’-15/16” The equipment is suitable for (1m) continuous immersion in water under conditions which shall be specified by the manufacturer.*

Dimmable from 0~10V

Non-Dimmable

IP Rating (See opposite column for further details). 66 Constant Current Driver

Constant Voltage Driver

MP Integrating Sphere Tested

*Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that produces no harmful effects.

Canopy Mounts

Low-Voltage Rails Systems

C1C Ø2-3/8” x 1/4” (Ø60mm x 6mm) canopy Mounts to custom 2” x 2” octagonal box (included) with screws.

DC Dual circuit rail 12V/24V MP Lighting rail system (See pages 165-167 for hardware options).

C1M Ø2-3/8” x 1/4” (Ø60mm x 6mm) canopy Retrofit to existing standard octagonal box using custom mounting plate (included) with screws.

SR Single rail 12V/24V MP Lighting rail system (See pages 160-164 for hardware options).

C2C 2-5/8” Sq. x 3/8” (67mm Sq. x 10mm) canopy Mounts to custom 2” x 2” octagonal box (included) with screws.

SF Single rail flush wall 12V/24V MP Lighting rail system (See pages 160-164 for hardware options).

C2M 2-5/8” Sq. x 3/8” (67mm Sq. x 10mm) canopy Retrofit to existing standard octagonal box using custom mounting plate (included) with screws.

Caution A 24V LED driver must be used as the power supply. Using a traditional low-voltage 12V transformer to power the system will not work and will damage the LEDs.

C3 Ø4-5/8” x 1/4” (Ø117mm x 6mm) canopy Mounts to standard octagonal box (not included).

120V Track System

C4 4-5/8” Sq. x 1/4” (117mm Sq. x 6mm) canopy Mounts to standard J-box (not included).

3CT 3-circuit track Easy to position and tighten. Installs on MP Lighting 3-circuit track (sold separately). 3-circuit switch selectable (circuit 1,2,3 or off). Low profile. Positive locking.

Mounting & Finishing Options

www.mplighting.com

C7 Ø6-5/16” x 2-3/8” (Ø160mm x 60mm) canopy Mounts to standard octagonal box (not included).

C9 Ø4-13/16” x 11/16” (Ø122mm x 17mm) canopy Mounts to standard octagonal box (not included).

1CT 1-circuit track Easy to position and tighten. Installs on most 1-circuit track systems including Lightolier, Halo, Juno and 2-Wire.

Others Wall Mounts W1CB Ø2-3/8” x 1/4” (Ø60mm x 6mm) canopy Mounts to custom 2” x 2” octagonal box (included) with screws.

MB Ø1-5/8” (Ø41mm) mounting bracket Bracket mounts to ceiling or wall.

Finishing Options

(not all options are available for every product) W1MP Ø2-3/8” x 1/4” (Ø60mm x 6mm) canopy Retrofit to existing standard octagonal box using custom mounting plate (included) with screws.

BA = black anodized BK = powder coated black BN = brushed nickel

W2CB 2-5/8” Sq. x 3/8” (67mm Sq. x 10mm) canopy Mounts to custom 2” x 2” octagonal box (included) with screws.

BZ = bronze MA/MC = matte chrome MP = matte pewter

W2MP 2-5/8” Sq. x 3/8” (67mm Sq. x 10mm) canopy Retrofit to existing standard octagonal box using custom mounting plate (included) with screws. W3 Ø4-5/8” x 1/4” (Ø117mm x 6mm) canopy Mounts to standard octagonal box (not included).

S = silver S3 = 303 stainless steel S6 = 316 stainless steel WH = white ZP = zinc plated

WK Ø2” x 3/4” (Ø51mm) wall hook Comes with 6-7/8” (175mm) standard vertical stem.

Custom finishes are available for some fixtures. Please contact factory for custom finish inquiries or requests.

192 193

Online with MP Lighting

Our Website MP Lighting’s website is designed to simplify the specification, sales, and order process for our valued agents and customers. It features an easy-to-use navigation menu and an extensive range of tools to allow users to quickly browse the site and obtain useful product information. Agents and customers can view product lines and application images, download specification sheets and literature, or access price lists and marketing materials. Available tools include a wire length calculator, recommended driver tool, downloadable Revit files, online order tracking, and online payment options. Visit us at www.mplighting.com to learn more about the features we have to offer.

Useful Tools MP Lighting’s website features a Wire Length Calculator tool and Recommended Driver for LED Fixtures tool as a value-added benefit to our customers: Wire Length Calculator – The Wire Length Calculator for LED products allows users to calculate the maximum wire length (voltage drop) by entering a few specifications about the product and wire type. To determine the overall length of wire that can be used, follow these instructions:

Recommended Driver for LED Fixtures – The Recommended Drivers for LED Fixtures tool is a simple, step-by-step tool that allows users to choose the correct driver based on fixture(s), driver type, and connection. To determine the recommended driver(s), follow these instructions:

Instructions 1) Enter the Load Current (mA) and the Voltage (V) of the fixture in the appropriate text box. Instructions about how to find and/or calculate the Load Current and Voltage are available with the Wire Length Calculator tool.

Instructions 1) Select a fixture from the drop down list.

2) Choose the appropriate Gauge, Maximum Voltage Drop, and System from the drop down list.

3) Select Non-Dimmable or Dimmable Driver Type and the recommended driver(s), output current/ voltage, AC input voltage, description, and driver image will be displayed.

2) Select the correct current for the fixture (if applicable).

3) Click ”Get Length” button and the wire length will be displayed. Please note that the length of wire calculated is the overall wire length that can be used for that specific fixture(s). The actual length of wire can be adjusted depending on the situation or application.

Revit MP Lighting's website now features a library of Revit Family Files for several LED fixtures. Users will be able to download a 3D Revit File and insert it into their architectural or mechanical documents. Each Revit Family File will include photometric data and related specifications, allowing architects and designers to view the MP product, along with its projected light levels, in their architectural renderings or BIM projects. To access the Revit Family Files, visit our website and choose “Support - REVIT Library” from the home page menu for a list of products. You can also choose the appropriate fixture from the “Products” menu (example L98) and then choose “Revit Modeling Download” from the “Downloads” menu on the right hand side of the page.

For fixtures connected in series, a diagram showing the minimum and maximum amount of fixtures is also shown. For additional product information, users can click on the driver product code, LED driver image, or LED Dimming Control to be directed to the web page or specification sheet.

Research & Development MP Lighting has recently expanded our Research & Development Lab to include new equipment for LED product testing and CSA Certification. With the recent push by government agencies for buildings to meet strict energy codes, it is even more important to ensure that MP products are tested for reliability and performance. The new equipment will ensure that product specifications are accurate and up-to-date. 1) The new LED Tester, produced by a leading German manufacturer of integrating spheres, measures the color temperature, color rendering index, and light flux in lumens for LED fixtures. The unique spherical shape and diffuse reflecting surface allow the light to reflect completely and evenly, measuring the fixture's light output in all directions. 2) The Konica Minolta CL-200A Incident Color Meter measures the color temperature and amount of light hitting a surface. This light meter is highly reliable in measuring the color temperature of white LEDs as it has the ability to measure the chromaticity and quality of light output from an assembled product. The addition of this equipment to our R&D Lab will also ensure that new products and product modifications meet or exceed industry standards, such as Energy Star and CSA Certification.

Research & Development

www.mplighting.com

194 195

Terms & Warranty

Terms for Sales

Warranty

Net 30 days with prior approved credit otherwise a 50% deposit with order and the balance in full prior to shipping. A service charge of 2% per month, compounded monthly, will be added to all past due amounts, except where prohibited by law. For credit applications, contact Accounts Receivable.

One year limited warranty - Low Voltage and Line Voltage Systems. Three year limited warranty - LED products and drivers. Note: Lamps are not covered by warranty.

Pricing See separate price list. All prices are retail prices and do not include shipping, handling, taxes, or installation. Prices are subject to change without notice and we reserve the right to correct errors. Please contact MP Lighting for details. Minimum Order Charge A Service Charge of $25.00 will be added to all original customer orders less than $100.00 net. Freight Freight is not included. Prepaid and charge shipping costs are Freight Company’s quoted estimates PLUS 15% administration fee to cover any shipping charge overruns, brokerage, customs charges and handling fees. This is non-negotiable and non-refundable. To avoid this fee, customers may provide their own courier or freight account number and will be responsible for additional charges from US customs. Shipping raw materials or replacement parts outside Canada may incur duty charges and/or taxes. Duty charges are calculated as $25.00 (fixed) plus 12% of the valued of the parts purchased. Cancellations Cancellation of orders must be made by fax or email without delay and may be subject to restocking, service and other fees. All orders that are in progress or completed, and are cancelled by the customer will be subject to a minimum 25% restocking charge. Quote Assistance MP Lighting does not guarantee the availability of any item listed and reserves the right to discontinue or change the technical or design specifications of its products at any time without notice. To ensure accuracy and expedite your order, please order by part#. Quote requests may be faxed to 604-708-1179 but will not be accepted over the phone. If you do not see what you’re looking for, please inquire. Our representatives and in-house design team can assist you with your specifications. Allow longer lead time for custom quoted items. Quotes are valid for 3 months from date of issue. Return Policy Return requests must be made within 60 days of the receipt of goods and require an RGA (Return Goods Authorization) number. Returns without an RGA will be refused and returned at your expense. MP Lighting will only accept the return of uninstalled products that are in saleable condition and are free of damages, scratches, and alterations. RGA numbers can be obtained by fax request at 604-708-1185 Attention: Customer Service, or by email request at rga@mplighting.com. All returns are subject to a minimum 25% restocking fee. We will not accept returns on custom orders* or purchase overruns. Goods must be returned prepaid with RGA numbers clearly marked on returning packages. RGA’s are valid for 30 days from issue date to the time products are received at our factory. Expired RGA’s will be refused and returned at your expense. Credit will be issued at the sole discretion of MP Lighting. No credit will be issued on defective products due to improper installation or misuse. *Custom Orders Custom Orders are defined as any product or products which are not included in our literature or are defined as ‘X’ in our literature. Custom orders may include, but are not limited to, irregular track lengths and off-site work, such as metal fabrications or custom colors. A 50% non-refundable deposit is required for all custom orders. Custom orders cannot be cancelled after Release of Order. Custom material cannot be returned except for defects proven to be the manufacturer’s responsibility.

MP DESIGN INC. (hereinafter referred to as “MP Lighting”) gives the following warranty for each new MP Lighting product distributed in Canada and the United States by MP Lighting and sold through an authorized MP Lighting Distributor. MP Lighting warrants that all products manufactured by MP Lighting to be free from defects in materials and workmanship under normal use subject to the following terms and conditions: Conditions 1. Parts and Labor: One year from date of original purchase from distributor for low voltage and line voltage systems. Three years from date of original purchase from distributor for LED products. 2. Limitation: MP Lighting systems are approved to CSA & UL standards when used as a complete system. Substituting another manufacture’s product will void all approvals and will remove MP Lighting from any liability. Malfunction and damage to product due to improper installation or misuse will not be covered under warranty. 3. Receipt of Goods: All products are assembled, tested and double checked for accuracy before being shipped to customer. It is the responsibility of the consignee receiving the goods to inspect the goods to ensure accuracy of order and to check for any damages that could have occurred from shipping. Claims for missing parts must be made within 5 business days from receipt of goods. Claims for missing parts after 5 days will not be accepted. Damaged to product due to shipping should be claimed immediately with freight carrier. MP Lighting is not responsible for product damaged in transit by freight carrier. 4. Proof of Purchase: This warranty applies to the product from original date of purchase from distributor. The customer must furnish proof of original invoice, packing slip or payment. 5. Subject Product: This warranty covers the following products– • Monospot Fixtures • Cable Systems • Single Rail Systems • Single Rail Flush Wall Systems • Horizontal Double Rail Systems • Vertical Double Rail Systems • Dual Circuit Rail Systems • 1-Circuit Track Systems • 3-Circuit Track Systems • Line Voltage Systems • LED Products 6. Disclaimer or Consequential Damage: This warranty covers only the product itself, we assume no liability for labor costs, installation costs, improper fixture selections or other losses. Product returned for Warranty inspection must be given an RGA (Return Goods Authorization) from MP Lighting. Products must be returned freight prepaid with the RGA number clearly marked on the outside of the box. Upon confirmation of a defect or failure, at our discretion, we will repair or replace the item. If product is deemed to be in good working condition or if any of the above mentioned conditions are not met, the product will be returned and no warranty will be given. RGA numbers may be obtained by fax request at 604-708-1185 Attention: Customer Service, or by email request at rga@ mplighting.com. Approval MP Lighting systems are Approved to US and Canadian standards by CSA.

Code Page

3CT 171

CPY052 168

L37 55

L181B 81

SDF063 170

3CT101 171

CPY053 168

L51 83

L181M 81

SDF064 170

3CT201 171

CPY054 169

L52 85

L181T 81

SDF065 170

3CT202 171

CPY055 169

L55 87

L191 125

SDF070

3CT301 171

EBX-160-ZP 183

L56 89

L200 157

SDF071 168

3CT401 171

EBX-260-ZP 183

L57 91

L202 121

SLD-100W 168

3CT501 172

END001 160

L58 93

L203 159

SLD-DC 167

3CT502 172

END004 165

L59 95

L221 111

SLD-SR 164

3CT601 172

END011 162

L62 97

L222 113

TLC010i 179

3CT602 172

G02L 127

L64 99

L223 115

TLD12012V12W1 183

3CT603 172

G03L 129

L65 101

LED3W350L 180

TLDAV60W9 177

3CT604 172

JON001 162

L72 103

LED8W350i 176

TLDAV60W12 178

3CT701 172

JON002 162

L73 105

LED8W350L 180

TLDAV100W12 178

3CT801 173

JON003 162

L75 107

LED9W700L 180

TLDAV100W15 178

3CT901 173

JON004 162

L76 109

LED10W350D 181

TLDAV100W20 179

3CT1001 173

JON005 165

L81 117

LED12W350 181

TLDAV100W24 179

3CT1201 173

JON006 165

L85 119

LED17W700D 181

TLDDLV6V6W1 182

3CT1202 173

L01 7

L91 57

LED20W700i 176

TLDDLV60W5000 177

3CT3001 174

L02 9

L92 59

LED25W1050 182

TLDDLV100W4100 177

3CTPWB 171

L03 11

L96 123

LED25W1050i 176

TLW120M10 184

ACCS-BE

175

L04 13

L97 61

LED40W1750 182

TLW120M300 184

ACCS-CS

175

L05 15

L98 63

P71L 131

TLW120MT150 184

ACCS-ELB

175

L06 17

L99 65

P81L 133

TLW120MT300 184

ACCS-LB

175

L07 19

L101 137

P82 L

135

TLW120MT600 185

ACCS-LH

175

L11 21

L102 139

RAL001 160

TLW277MT300 185

ACCS-LM

175

L12 23

L103 141

RAL004 165

TLW277MT600 185

ACCS-MS

175

L13 25

L104 143

RAL181 81

ACCS-SH

175

L14 27

L106 145

SDF010 160

ACCS-SHB

175

L15 29

L111 147

SDF011 160

CPY010 163

L16 31

L112 149

SDF012 160

CPY011 163

L17 33

L121 151

SDF013 160

CPY012 163

L18 35

L130 67

SDF014 161

CPY013 163

L19 37

L131 69

SDF015 161

CPY015 164

L21 39

L134 71

SDF016 161

CPY016 164

L22 41

L135 73

SDF040 165

CPY018 164

L31 43

L141 75

SDF041 165

CPY041 166

L32 45

L142 77

SDF042 165

CPY043 166

L33 47

L151 79

SDF045 166

CPY044 166

L34 49

L161 153

SDF060

169 & 174

CPY050 173

L35 51

L171 155

SDF061

169 & 174

CPY051 173

L36 53

L181 81

SDF062 169

Index

www.mplighting.com

168 & 174

196 Please Recycle

197

16 West 4th Avenue Vancouver BC V5Y 1G3 Canada t 1 877 708 1184 (toll free) t 604 708 1184 f 604 708 1185 sales@mplighting.com www.mplighting.com Copyright 2012 ÂŠ MP Lighting. The information in this book is subject to change without notice. Printed in Canada.

01-2012