Mount C1 Canopy and Pendant
1
Unbraid outer woven wire to expose 1/2” (13mm) of inner wire. Twist outer strands tightly together.
2
Strip 1/8” (3mm) of insulation from inner wire.
3
Connect braided coax wire to low voltage wiring (remote transformer 60W minimum 12V).
4
Attach mounting plate to electrical box with screws.
INPUT PRIMARY 120/277V 12V Remote Transformer
45mm 1-3/4”
45mm 1-3/4”
C1 Canopy Ceiling Mount Pendant
Installation Instructions
CAUTION • Read all instructions. • Risk of fire and electrical shock. Turn off power before installation. • Connect to 12V electronic transformer. • Use only low voltage electronic dimmers. • Maximum 50W lamp.
5
Thread C1 canopy to mounting plate.
3mm 1/8”
• Keep this document as a reference.
Copyright © MP Lighting All technical information in this document is subject to change.
13mm 1/2”
• Test installation by leaving fixture on for 20-30 minutes to ensure proper operation.
T 604 708 1184 mplighting.com
Version 05-2008