Copyright © MP Lighting All technical information in this document is subject to change.
CABLE system electronic surface mount TRANSFORMER W/ FLEXIBLE FEED
TLW120E150-CS15CF (Old Code:CS12150E/F)
TLW120E230-CS15CF
(Old Code: CS12230E/F)
Spec Sheet
Material:
Steel case and copper tube with electroplated finish.
Mounting:
Surface mounts to standard J-box.
Electrical:
100% Duty cycle. Auto reset circuit protection. Can only be used on MP cable system. Flexible power feed - cannot be used as cable support. Can be dimmed using electronic low voltage dimmers (i.e. Lutron Diva).
Ø6-3/8” Ø162mm
AC Input Voltage: DC Output Voltage: Output Wattage:
2-3/8” 60mm
Maximum Load: Power Factor: Typical Efficiency: Short Circuit Protection: Overload Protection: Operating Temperature: Maximum Case Temperature: Humidity (Non-Condensing): Weight:
15” cord 381mm
120V, 60Hz 12V 150W Max. (TLW120E150-CS15CF) 230W Max. (TLW120E230-CS15CF) Depends on wattage of fixture 95% Min. 80% Yes Yes -10 ~ 50°C (14 ~ 122°F) 65°C (149°F) 5% ~ 95% 3 lb / 1.4 kg
Approval:
Code
Wattage
TLW120E
Mount
-
Cord Length
CS
Canopy
CF
www.mplighting.com
Dry locations. Approved to UL standards by CSA/US.
6” / 152mm
-
Canopy
150 = 150W 230 = 230W
CF = Circular canopy with flexible power feed.
Cord Length
Finish
15 =15” long X = custom length
MC = matte chrome BN = brushed nickel
t 604.708.1184
f 604.708.1185
Wattage
t 604.708.1184 f 604.708.1185 mplighting.com
Finish
* Custom length available.
[Project]
[Quantity] [Note]
Datecode 0809