Quick Tips for Gas Hob Installation

Quick Tips for Gas Hob Installation Whenever you are in the need to replace your existing stove, then a service provider offering Gas Hob Installation in London can come in handy.

You can always decide to get the gas stove installation done in an easy way yourself at home. This blog is just the confidence booster that you need. ● The first and foremost thing that you should keep in mind is that you have checked through the local codes to make sure of the fact that homeowner installation is authorized. ● Next on, you will require a few things like a gas leak detector, a wrench, a corrugated gas connector and yellow Teflon pipe-joint tape. ● You need to buy the right stove connector. These usually come with a mark for a range and it is important that you check for it too. You need to

● ● ●

● ● ● ●

purchase a connector that has the end connector fittings just the way you need. Choose a connector that is long so that you get space between the wall and the gas stove.

Don't forget to pull the range out and shut the gas cock off.

The next thing to do is wrap the yellow Teflon pipe-joint tape two times in a clockwise manner.

After this, you will have to remove the end connector fitting, following which you need to wrap this end with the Teflon tape, and then screw it to the gas line. At any point of time, if you think that the task is getting complicated for you, you can always call for professionals who help with Gas Hob Installation in London.

Screw a street elbow in the range gas port with the connector's other end.

Put the Teflon tape on all the fittings.

After you have done this, it's time to tighten the connector nuts to ensure that the tube is straight to the fitting.

As a security step, you should check for any leaks to make sure that work has been accomplished neatly.

Finally, finish off with moving the gas stove to its place and start cooking.