2012 NEW TOOLS 2460
DIE-CAST CAP-TYPE OIL FILTER WRENCH - 64MM X 14 TOYOTA / LEXUS / SCION
Single-piece, die-cast aluminum design will withstand the highest torque loads when removing aluminum Oil Filter Housing Caps found on many late model Toyota, Lexus and Scion vehicles. ½” sq. drive.
2481
HEAVY-DUTY CAP-TYPE OIL FILTER WRENCH - 76MM X 14 FORD / MAZDA / MERCEDES
Built with higher torque specs to service stubborn Oil Filters & Housings Caps. Features extra-thick wall construction with 3/8” square & 7/8” hex drive.
2490
FUEL FILTER TOOL - FORD 7.3L
Removes and installs Diesel Fuel Caps on ’95 – ’02 Ford 7.3L. Also works on other Diesel Filter systems using same design. Features combination 3/8” square and 7/8” hex drive.
2087
DIFFERENTIAL PLUG EXTRACTORS For removal of female style plugs with rounded off inserts.
No.
Application
9035 9037 9038
5/16” plugs w/ 1/4” square hole 1/2” plugs w/ 3/8” square hole 3/4” plugs w/ 1/2” square hole
7420
FORD TRANS FILLER ADAPTER
Tool is necessary to fill or add fluid to the 5R55W automatic transmission on ’03 & up Ford Explorers. For use with Suction Gun after removing fill plug.
7070
COOLING SYSTEM PRESSURE TESTER KIT
Pinpoints external leaks caused by loose clamps or leaky hoses, connectors, water pumps or radiators. Diagnoses internal leaks caused by a blown head gasket or damaged block or head. Tests pressure on radiator and coolant bottle caps. Kit includes hand pressure pump, 4 cooling system adapters & 2 dual-function cap adapters. Services most US & Asian & some European models..
OIL DRAIN TOOL – VW / AUDI
Prevents oil spillage during filter change. Screws into filter housing to open one-way valve and drains oil. Features 20” (51cm) hose with plastic plug. Fits many VW & Audi vehicles from ‘05 – ‘09.
66
2012 NEW TOOLS 2874
CAM CHAIN TENSIONER RETAINER – VW / AUDI
Holds the chain and tensioner in position during assembly and disassembly on many VW & Audi vehicles.
2865
TWIN CAMSHAFT HOLDER – VW / AUDI
Special bar locks camshafts relative to each other during timing belt and tensioner service or when removing crank bolts. Use with CTA #2872 TDC Lock Pin Tool. Applications: VW/Audi V6 w/ 2 valves per cylinder.
2867
TWIN CAMSHAFT HOLDER – VW / AUDI
Special bar locks camshafts relative to each other during timing belt and tensioner service or when removing crank bolts. Use with CTA #2872 TDC Lock Pin Tool. Applications: VW/Audi V8 w/ 5 valves per cylinder
2872
TDC LOCK PIN TOOL – VW / AUDI
For use with #2865, 2867 & 2869 Camshaft Holders to lock the crankshaft at TDC.
2870
TENSION PULLEY SPANNER MITSUBISHI / HYUNDAI / CHRYSLER
Adjusts timing belts having idler pulleys with pin holes. Pins in offset head of tool engage the pulley to rotate around the retaining bolt.
2062
OXYGEN SENSOR SOCKET – NARROW SLOT
22mm (7/8”) hex socket with narrow slot for strength. Combination 3/8” square drive and 1” hex drive. Nickel plated.
2047 TWIN CAMSHAFT HOLDER – VW / AUDI
Special bar locks camshafts relative to each other during timing belt and tensioner service or when removing crank bolts. Use with CTA #2872 TDC Lock Pin Tool. Applications: VW/Audi V6 2.7L & 2.8L w/ 5 valves per cylinder.
2869
2715
IPR SOCKET
Services the Injector Pressure Regulator (IPR) on Ford Diesels. Use with 3/8” drive tools.
8100
CRANKSHAFT BOLT REMOVER
Generates up to 600 ft. lbs. of force to service Timing Belts, Crankshaft Seals, Harmonic Balancers and Bell Housings. Saves time when working on vehicles with limited Crankshaft bolt access. Tool is bi-directional to both loosen and tighten bolts. Use with impact sockets. OAL: 24”/61cm
3355
FUEL INJECTION TEST KIT – UPDATE SET
Upgrades CTA #3300 kit to cover virtually any application. Includes the following packed in blow-mold case:
Hyundai, Kia, Mitsubishi Style CAM ADJUSTMENT GAUGE KIT AUDI
Locks and holds camshafts when adjusting the left and right camshafts. Services Audi A4, A6, A8 2000 – 2007 w/ AVK engine.
11mm Fuel Rail Adapter 15mm Fuel Rail Adapter 16mm Fuel Rail Adapter
Hair Pin Adapters 1/4” (6mm) Honda/Ford 5/16” (8mm) Toyota Prius 90º
Schrader Type Adapters
67
.308 x 32 – 90º Ford/BMW 7/16 x 20 – 90º GM/Chrysler 8mm Volvo
2012 NEW TOOLS 2367
FORD TRITON SPARK PLUG REPAIR KIT – 1.9, 3.8, 4.6, 5.4 & 6.8L (’96 – ’03)
Over-sized, alloy steel inserts provide new threads on blown spark plugs. Repairs other brand inserts that fail. (Supersedes CTA #98140)
2366
3032
12V / 42V HYBRID CAR CIRCUIT TESTER
Tests 12 & 42V systems. Checks high volt diesel injector circuits found on Ford 6.0L, 6.4L and others. Safe for low current circuits as tester only draws 3 milliamps at 12V. Automatic volt identification: Blue for 12V, Red for 42V. Features 2 bright LEDs, crystal clear handle for 360º visibility, 3 meter (10’) heavy-duty cable with hooded alligator clip and high-impact body with spring-strain relief.
REPLACEMENT INSERT – 14MM
For use with #2367
3064
RELAY PLIERS – STRAIGHT JAWS
For safe installation and removal of relays. Nylon handles are spring loaded. Special-design jaws come in two angles, straight and 60º. Services Ford, Mazda, Chrysler, VW, Mercedes, Opel, Renault and Nissan.
2368
FORD TRITON 3-VALVE INSERT INSTALLATION KIT
Repairs damaged threads or blowouts. Services 5.4L & 6.8L engines built before 10/9/07 and 4.6L engines built before 11/30/07 found in many ’04 – ’08 Ford, Lincoln & Mercury vehicles.
2385
VALVE SPRING COMPRESSOR KIT
Replaces valves springs and valve stem oil seals without the need to remove the cylinder head. Applications include BMW, VW, Audi, Hyundai, Toyota, Ford, Renault, Opel, Seat and Clio.
RELAY PLIERS – 60º JAWS
For safe installation and removal of relays. Nylon handles are spring loaded. Special-design jaws come in two angles, straight and 60º. Services Ford, Mazda, Chrysler, VW, Mercedes, Opel, Renault and Nissan.
FORD TRITON SPARK PLUG SOCKET – 9/16” 4330
Removes and installs plugs found on Ford F-150 w/ Triton Engine. Features rubber insert to prevent breakage and extension w/ 3/8” square drive.
2112
3066
HUB REMOVAL TOOL
Thread onto the hub retention stud and strike tool to remove hub from the back. Services Ford Super Duty and Dodge Ram 2500. Features knurled handle and replaceable brass cap.
4008
STEERING KNUCKLE SPREADER
Enables the removal and fitting of shock absorbers without damaging the aluminum or cast iron knuckle. Tool adjusts for centered or non-centered slot. Made of chrome-moly steel. Applications include Audi, BMW, VW, Ford, Seat, Renault, Peugeot and many Japanese vehicles.
68
2012 NEW TOOLS 9258
HEAD BOLT REMOVER – FORD 6.0L
Use with 3/4” drive tools to transmit high torque needed to loosen and tighten head bolts. Allows access to rear head bolts by eliminating the need to remove the cab from the chassis, prevents damage to rear heat shield and eliminates the need to remove the evaporator housing.
IN-LINE FLARING TOOL KITS Aligns the adapters, cone & tube to make perfect flares. Lowprofile allows use on the vehicle. Less risk of breaking adapters. Offers same results as hydraulic or vise-type tools at a fraction of the cost.
No.
Description
9212 9214
SAE - 3/16”, 1/4”, 5/16” Metric - 4.75mm, 5mm, 6mm
8099
PUSH PULLER
For use with CTA and other brands of Bearing Splitters when removing and installing Gears, Bearings, Shafts, Pulleys and other press-fit parts. Capacity: 10 Tons Spread: 2-1/8" - 7-1/4" Screw Size: 3/4" - 16 x 12" Reach: 8-1/4"
9650
8 PC. EXTERNAL TORX® PLUS SOCKET SET
New design services elliptical-shaped fasteners now found on many vehicle applications. Standard Torx® or Ribe designs will not fit these fasteners. Black finish and impact quality. Also available individually.
No. Size Dr. No. Size Dr.
9651 9652 9653 9654 9350
EP6 EP7 EP8 EP10
1/4” 1/4” 1/4” 3/8”
9655 9656 9657 9658
EP12 EP14 EP16 EP18
3/8” 3/8” 3/8” 1/2”
5 PC. LONG SHAFT XZN TRIPLE SQUARE BIT SOCKET SET
Highest quality, 2-pc. construction with extra-long shaft. Packed on socket rail. Also available individually.
No. Size OAL
Sq. Dr.
9351 9352 9353 9354 9355
3/8” 1/2” 1/2” 1/2” 1/2”
8755
8mm 10mm 12mm 14mm 16mm
3-1/2” / 89mm 4-1/8” / 105mm 4-5/8” / 117mm 4-7/8” / 124mm 4-7/8” / 124mm
4 PC. CLUTCH-HEAD BIT SOCKET SET
For servicing special fasteners found on older GM vehicles. 4 sizes to fit most applications. Sizes: 5/32”, 3/16”, 1/4”, 5/16”, all with 3/8” square drive.
TAP HOLDERS
8092
SLIDE HAMMER PULLER
Remove bearings, gears, bushings, seals, etc. Features 5 lb. hammer and 3-Jaw assembly.
For use with CTA Thread Reconditioning Taps. Holds tap for proper alignment in any direction and frees hand. 3/8” square drive and black finish.
No. Description
9660 Small - use with #18111, 18112, 18113, 18115 9665 Large - use with #18114, 18116 9990
FLOW-THRU PARTS BRUSH W/ TUBE
For parts washing sinks with circulating solvent systems. Features Trialoy ® double-duty filaments, heavy-duty grooved handle and 28” / 71cm long tube.
9992
Alloy steel taps clean common oil pan threads. Also for Transfer Case & Transmission Drain Plugs.
PARTS WASH BRUSH
For hand use in a parts washing sink or solvent container. Features Trialoy® double-duty filaments and heavy-duty grooved handle. OAL: 9-1/2” (25cm)
69
THREAD RE-CONDITIONING TAPS No.
Size
Applications
18111 18112 18113 18114 18115 18116 18117 18118 18119
12mm x 1.25 12mm x 1.75 1/2” – 20 14mm x 1.50 12mm x 1.50 14mm x 1.25 16mm x 1.50 18mm x 1.50 22mm x 1.50
Infiniti, Lexus, Nissan, Toyota Ford, GM, GMC, Saturn Dodge, Ford, GM, GMC, Jeep, Mitsubishi Ford, Honda, Hyundai, Kia, Mazda BMW, Mercedes Benz Jeep, Ford Truck Dodge, Jaguar Dodge Truck, Toyota, Volvo Dodge Truck, BMW
Note: Use above #’s for clam-shell pack. For polybag pack, order with “B” suffix, i.e. 18111B
©2012 CTA MANUFACTURING CORPORATION 263 Veterans Boulevard, Carlstadt, NJ 07072 Phone: (201) 896-1000 • Fax: 201-896-1378 E-mail: info@ctatools.com • www.ctatools.com
Catalog No. 0112