A Legacy of Innovation Pivot Point Inc. is located in the small town of Hustisford, Wisconsin, and is owned by the Leitzke Family. Since 1929, the Leitzke family has been pioneering the manufacture of NonThreaded Fastener Solutions. This tradition of innovation and hard work enables us to meet and exceed our customers’ needs. Our ultimate goal will always be your COMPLETE SATISFACTION. We are highly committed to offering the best service you’ve ever experienced. We want your experience to be positive and hassle-free throughout. Pivot Point manufactures both stock and specialty NonThreaded Fastener Solutions. Continually investing in automation, systems and improvements allows us to provide fast lead times and competitive pricing.
Bow-Tie Locking Cotter™ Pins, Rue Ring™ Locking Cotter pins, Nylon Lanyards™, Infinity S-Hooks™ and more. Specials are our specialty! If you are unable to locate a specific fastener for your application, put our expertise to work for you! We offer personalized engineered solutions and we are adept at designing specialized fasteners tailored to suit your particular application. Our wide range of machine capabilities include cold heading, screw machining, high speed drilling, ball detenting, assembly and numerous other machining capabilities. We manufacture with numerous materials including carbon steel, alloy steel, stainless steel and aluminum. We can provide virtually any finish that you require, including electroplating such as zinc and nickel, mechanical plating, black oxide, passivation, anodizing and more.
We are widely recognized for our progressiveness in developing new fastener solutions to solve particular fastening challenges. Exclusive innovations include SLIC Pins™,
THE LEITZKE FAMILY: Pioneering the manufacture of fastening solutions Pivot Point Inc. and the Leitzke family have a rich history pioneering the manufacture of fastening solutions. We trace our history back to 1929 when Rein Leitzke founded Leitzke Specialties, engaged in the manufacture of various fasteners- such as clevises, clevis pins, cotter pins, keystock and washers- used primarily in the agricultural and machine building industries. The company name was later changed to Rein Leitzke Incorporated. Rein Leitzke proved to be an extraordinary inventor and industrialist, creating such notable inventions as the Split Washer, Automatic Couplings, Adjustable Clevis Pins, Wire Stretcher and more. His company evolved to offer ever increasing product lines and unique innovations until its sale in the 1970’s. In 1982 grandson Rue Leitzke resurrected the original company under the name Pivot Point Incorporated. While our current product line includes many of the original “agricultural fasteners,” other industrial markets for Pivot Point Non-Threaded Fastener Solutions have rapidly evolved. Pivot Point supplies reliable fasteners for a myriad of industries including transportation, material handling, military and defense, aerospace, automation, medical, consumer products and more. Pivot Point’s line of fastener solutions continues to evolve in response to demand for increasingly complex and unique fasteners. We are proud of our rich heritage and experience in matching and creating unique fasteners for specific applications.
Rein Leitzke and the original patent drawings for the Automatic Coupling
Left: Glayr Leitzke at the original Pivot Point factory in Hustisford, WI ~ 1992 Above: Rue Leitzke receives plaque honoring ISO 9001 Certification ~ 2000
QUICK CONTENT GUIDE
PRECISION SCREW MACHINED COMPONENTS . . . 5
WIRE FORMING SOLUTIONS . . . . . . . . . . . . 28-35
Precision Screw Machined Components . . . . . . . . . . . 5
Bow-Tie Locking Cotters™ . . . . . . . . . . . . . . . . . 28-29
COLD HEADING SOLUTIONS . . . . . . . . . . . . . 6-13
Rue Ring™ Locking Cotters . . . . . . . . . . . . . . . . . 30-31
SLIC Pins™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Hair Pin Cotters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Clevis Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Double Loop Hairpin Cotters . . . . . . . . . . . . . . . . . . . 33
Detent Clevis Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Infinity S-Hooks™ . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Lynch Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
S-Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Wire Lock Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Circle Cotters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Tab Lock Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Kickout Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
QUICK RELEASE SOLUTIONS . . . . . . . . . . . . 14-19
ADDITIONAL FASTENING SOLUTIONS . . . . . 36-39
Detent Ring Pins . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Split Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Positive Lock Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Basic Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Pull Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Crimp Ring Retainers . . . . . . . . . . . . . . . . . . . . . . . . . 37
Extended Locking Pull Pins . . . . . . . . . . . . . . . . . . . . 18
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38-39
Ball Plungers/Spring Loaded Devices . . . . . . . . . . . . . 19
CUSTOM ENGINEERED FASTENING SOLUTIONS We specialize in Personalized Engineered Solutions! We’ll work with you to develop the ideal fastener solution to suit your specific application; and we’ll also provide preliminary prints and samples. We love a challenge, so let us help you develop the perfect solution!
SCREW MACHINE SOLUTIONS . . . . . . . . . . . 20-21 Ring Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Bent Arm Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SEE PAGES 40-41
Headless Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
GENERAL INFORMATION . . . . . . . . . . . . . . 42-47
CABLE ASSEMBLY SOLUTIONS . . . . . . . . . . . 22-25
Mechanical Properties of Steel . . . . . . . . . . . . . . . . . . . . . 42
Steel Lanyards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Chemical Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Plating & Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Bulk Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Bulk Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
Credit Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cable Cutter & Crimp Tool . . . . . . . . . . . . . . . . . . . . . 25
Sales Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . . . 46 Decimal Equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
INJECTION MOLDING SOLUTIONS . . . . . . . . 26-27 Nylon Lanyards™ . . . . . . . . . . . . . . . . . . . . . . . . 26-27
You can be assured of superior part quality, and our compliance to ISO 9001 version 2008 means we deliver quality throughout from order entry to shipment. We diligently maintain our certification. (Certificate #FM53796)
UNI T
CE
U.S.A.
ARK OFF I EM
PRECISION MADE in the
ISO CERTIFIED Version 9001:2008 Certificate #FM53796
STATES P ED
ENT & TRAD AT
Press Lock Rivets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Pivot Point is proud to manufacture the majority of our fasteners in the U.S.A. We hold several U.S. and Foreign Patents and offer other fasteners made with our exclusive design innovations. Look for these icons to identify our innovative solutions!
3 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
ORDERING INFORMATION
PIVOTPINS.COM IS ALL NEW! Put the power of our new website to work for you: Configure Product Request Information/Quote Upload Files View 3D & 2D CAD Drawings Watch Demo Videos Save Favorites Live Chat Help
EASY WAYS TO ORDER: CALL
Toll-Free (800) 222-2231 International (920) 349-3251
mail@pivotpins .com
FAX
(920) 349-3253
HELPFUL ORDERING INFORMATION:
Pivot Point, Inc . P .O . Box 488 Hustisford, WI 53034-0488
STOCK One look through our catalog and you’ll be surprised by the variety of products and sizes that we carry in stock. We’ve selected the most popular sizes to offer you off-the-shelf timeliness and savings. Most stock orders can ship the same day.
FREE SAMPLES Not sure if the fastener you’ve selected is right for the job? Then try it out first! We’ll send you samples, even if it’s a special prototype design and we have to make it! Most samples are sent completely free of charge.
PRINTS To ensure that your part specifications are met, we draft detailed in-house prints for all parts that we manufacture. A copy is supplied for your review and approval. We want to be confident that the part we are producing meets your expectations in every aspect.
ENGINEERING DATA & SPECIFICATIONS We’ve provided detailed specifications for each product. See back of catalog for additional technical data.
PRICING Please contact us for pricing. Prices subject to change without notice.
LARGE QUANTITY DISCOUNTS Volume discounts are available; please contact us for pricing.
MINIMUM ORDER A $100 minimum order and $10 line item minimum apply.
TERMS AND CONDITIONS
See back of catalog for complete terms and conditions.
Minimum Order A $100 minimum order and $10 line item minimum apply. Returns Call for authorization to return parts within 30 days of invoice date. A restocking charge is applied to all authorized returns due to customer error. Any change or alteration to parts nulls the warranty. Returns apply only to standard, stock inventory items and not to special parts that conform to specifications. Shipping Tolerance Pivot Point reserves the right to under or over ship the order quantity of all nonstock items by 10% as a result of our production processes. Unannounced Changes Data published in this catalog - including tolerances, specifications and terms and conditions - are subject to change without notice. F.O.B. All shipments are made FOB Hustisford, WI, and freight is billed either Freight Collect, 3rd Party or Prepay and Add. Limited Warranty Pivot Point warrants that all Products shipped against your order will conform to specifications and drawings submitted, and that such Products will be manufactured and inspected according to generally accepted applicable practices of companies manufacturing industrial fasteners. Unless dimensions are limited by a specific tolerance, commercial tolerances will apply. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE. This warranty is void unless Customer inspects the Products when received and notifies Pivot Point of any rejections based on non-conformity to specifications of or defects in the Products within 30 days after receipt thereof by Customer. This warranty does not apply to any Products that are reworked or subjected to any type of additional processing by Customer.
4 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
It’s a Pin & Cotter
ALL IN ONE!
SLIC Pins
™
U .S . Patent No . 6,872,039 & No . 7,147,420 Foreign Patents Issued
Strong spring-loaded plunger features easy insertion ramp and the vertical face at the rear prevents backing out. This patented design is ideal for holes where cotter pin access is limited.
CE
STATES P ED
& ENT TRAD AT
UNI T
The Self Locking Implanted Cotter Pin is a pin and cotter all in one!
MADE TO
ORDER
PRECISION MADE in the
U.S.A.
The SLIC Pin™ eliminates cotters, bolts and nuts and does not require tools for use - thereby greatly speeding assembly times. It is well suited for automated assembly and is easier, safer and faster.
ARK OFF I EM
COST SAVING. QUICK-LOCKING. SECURE. Spring-loaded plunger retracts when inserted, then locks into place .
SLIC E
B
A
22° D
SLIC PIN™ SPECS Basic Shank Diameter
Effective Length
3/16
as required
1/4
Shank Diameter A
Chamfer D
Approx. Plunger Height E
Head Diameter B
Head Height C
.181 - .186
.31
.06
.040 x 22°
.035
as required
.243 - .248
.37
.09
.055 x 22°
.049
5/16
as required
.306 - .311
.43
.09
.065 x 22°
.062
3/8
as required
.368 - .373
.50
.12
.070 x 22°
.075
7/16
as required
.431 - 436
.56
.15
.070 x 22°
.075
1/2
as required
.491 - .496
.62
.15
.090 x 22°
.083
5/8
as required
.616 - .621
.81
.20
.115 x 22°
.083
3/4
as required
.741 - .746
.93
.25
.115 x 22°
.083
Unless otherwise noted, all dimensions are for reference only .
6 PIVOT POINT INC.
N TA G
ES
ne all in o cotter d n a , nuts • Pin , bolts otters c s e pin t ina cotter • Elim where s le o l for h • Idea is limited e c embly c a ss ter ass bly er, fas f a s assem r, mated • Easie o t u a for suited • Well eeded ools n • No t
Effective Length
C
A D VA PIN™
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
MADE TO YOUR SPECIFICATIONS INCLUDING: • SPECIAL PLUNGER SHAPES • DIFFERENT PIN/HEAD STYLES • VARIOUS FINISHES • STEEL, ALLOY, STAINLESS ALUMINUM, BRASS & MORE
DESIGN YOUR SLIC PIN™ ONLINE! PIVOTPINS.COM Configure and download a 3D Rendering of a SLIC Pin™ to your specifications! Request a Quote!
THE SLIC PIN™ IN ACTION: USE IN PLACE OF COTTERS OR CLIPS
QUICK CONNECTION WITH CABLE MECHANISM
USE AS A STANDOFF FOR QUICK CONNECTING
WATCH THE DEMONSTRATION VIDEO: PIVOTPINS.COM
7 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
Clevis Pins Pivot Point manufactures clevis pins in-house. Stock pins are cold headed per IFI standards except for hole and point dimensions. All holes are chamfered for a superior part finish.
Clevis Pins stocked plain finish. See page 28-29 for Bow-Tie Locking Cotter™ Pin.
PRECISION MADE in the
U.S.A.
Only the finest cold heading quality wire is used. Standard clevis pins are manufactured in low carbon steel or stainless type 302, and stocked plain finish. Holes are drilled per Pivot Point specifications.
Length
C
Effective Length
D
Standard
F
Optional
Special clevis pins and grades are available. Pivot Point stocks alloy material to produce up to grade 8 strength, if required. Aluminum and other materials are also available. Secondary heat treatment, plating, grooving and end chamfering available.
B A
45° E Hole Diameter (Chamfered)
R .005 .015
Alternate Head Styles
L
Free Flow of Material
R1 R3
CLEVIS PIN SPECS
+
R2
Basic Shank Diameter
Shank Diameter A
Head Diameter B
Head Height C
Head Chamfer D
Pivot Point Std. Hole E
3/16
.181 - .186
.31
.06
.02
3/32
5/64
.14
.045
1/4
.243 - .248
.37
.09
.03
3/32
5/64
.20
.045
5/16
.306 - .311
.43
.09
.03
1/8
7/64
.25
.060
3/8
.368 - .373
.50
.12
.03
5/32
7/64
.32
.060
Optional Dimensions Per J493 Hole Dia. Point Dia. Point Length E L F
7/16
.431 - 436
.56
.15
.04
5/32
7/64
.38
.060
1/2
.491 - .496
.62
.15
.04
5/32
9/64
.43
.076
5/8
.616 - .621
.81
.20
.06
5/32
9/64
.55
.076
3/4
.741 - .746
.93
.25
.07
5/32
11/64
.67
.093
FLAT HEAD
R
PAN HEAD
R+
+
TRUSS HEAD
BUTTON HEAD
Standard Hole Location Any hole is placed on center from end of pin, a distance equal to its diameter. Example:
.156 on center from end .156 hole diameter
siz k Select ss. See stoc ther le n O i in sta n page 11. o ble on g la i n i a list es av z i s s s sis. stainle to-order ba e d a ma
.078 web
C L E V I S P I N S - Carbon Steel, Plain Finish
3/16
STOCK CODE
CP-2 CP-4 CP-6 CP-8 CP-10 CP-12 CP-14 CP-16 CP-18 CP-20 CP-22 CP-24
STOCK SIZES
(diameter x length)
APPROXIMATE LENGTH UNDER HEAD: To Edge of Hole (effective length)
3/16 x 1/2 3/16 x 19/32 3/16 x 5/8 3/16 x 3/4 3/16 x 7/8 3/16 x 1 3/16 x 1-1/4 3/16 x 1-1/2 3/16 x 1-3/4 3/16 x 2 3/16 x 2-1/2 3/16 x 3
.359 .453 .484 .609 .734 .859 1 .109 1 .359 1 .609 1 .859 2 .359 2 .859
To Center of Hole
.406 .500 .531 .656 .781 .906 1 .156 1 .406 1 .656 1 .906 2 .406 2 .906
HOLE SIZE
CKED! SS STO ed E L N I k STA es stoc
Approximate Weight/Pounds per 100 Pieces
3/32
.45 .53 .58 .63 .74 .82 1 .03 1 .22 1 .39 1 .59 1 .93 2 .44 Clevis Pins continued on page 9
8 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
3/8
5/16
1/4
C L E V I S P I N S - Carbon Steel, Plain Finish STOCK SIZES
Continued from page 8
APPROXIMATE LENGTH UNDER HEAD:
STOCK CODE
(diameter x length)
To Edge of Hole (effective length)
To Center of Hole
CP-26 CP-28 CP-30 CP-32 CP-34 CP-36 CP-38 CP-40 CP-42 CP-44 CP-46 CP-48 CP-50 CP-52 CP-54 CP-56 CP-62 CP-66 CP-68 CP-70 CP-72 CP-76 CP-78 CP-80 CP-82 CP-84 CP-86 CP-88 CP-90 CP-92 CP-94 CP-100 CP-104 CP-108 CP-110 CP-114 CP-116 CP-118 CP-120 CP-122 CP-128 CP-134 CP-136 CP-140 CP-142 CP-144 CP-146 CP-148 CP-150 CP-152
1/4 x 1/2 1/4 x 5/8 1/4 x 3/4 1/4 x 51/64 1/4 x 7/8 1/4 x 1 1/4 x 1-1/8 1/4 x 1-1/4 1/4 x 1-3/8 1/4 x 1-1/2 1/4 x 1-5/8 1/4 x 1-3/4 1/4 x 1-7/8 1/4 x 2 1/4 x 2-1/8 1/4 x 2-1/4 1/4 x 2-1/2 1/4 x 2-3/4 1/4 x 3 1/4 x 3-1/2 1/4 x 4 5/16 x 1/2 5/16 x 3/4 5/16 x 7/8 5/16 x 31/32 5/16 x 1 5/16 x 1-1/8 5/16 x 1-3/16 5/16 x 1-1/4 5/16 x 1-3/8 5/16 x 1-1/2 5/16 x 1-3/4 5/16 x 1-7/8 5/16 x 2 5/16 x 2-1/8 5/16 x 2-1/4 5/16 x 2-3/8 5/16 x 2-1/2 5/16 x 2-5/8 5/16 x 2-3/4 5/16 x 3 5/16 x 3-1/2 5/16 x 4 3/8 x 3/4 3/8 x 1 3/8 x 1-3/32 3/8 x 1-1/8 3/8 x 1-1/4 3/8 x 1-5/16 3/8 x 1-3/8
.359 .484 .609 .656 .734 .859 .984 1 .109 1 .234 1 .359 1 .484 1 .609 1 .734 1 .859 1 .984 2 .109 2 .359 2 .609 2 .859 3 .359 3 .859 .313 .563 .688 .781 .813 .938 1 .000 1 .063 1 .188 1 .313 1 .563 1 .688 1 .813 1 .938 2 .063 2 .188 2 .313 2 .438 2 .563 2 .813 3 .313 3 .813 .516 .766 .859 .891 1 .016 1 .078 1 .141
.406 .531 .656 .703 .781 .906 1 .031 1 .156 1 .281 1 .406 1 .531 1 .656 1 .781 1 .906 2 .031 2 .156 2 .406 2 .656 2 .906 3 .406 3 .906 .375 .625 .750 .844 .875 1 .000 1 .063 1 .125 1 .250 1 .375 1 .625 1 .750 1 .875 2 .000 2 .125 2 .250 2 .375 2 .500 2 .625 2 .875 3 .375 3 .875 .594 .844 .938 .969 1 .094 1 .156 1 .219
Approximate Weight/Pounds per 100 Pieces
HOLE SIZE
3/32
PRECISION MADE in the
U.S.A.
.90 1 .04 1 .20 1 .27 1 .40 1 .54 1 .75 1 .87 2 .02 2 .22 2 .35 2 .56 2 .75 2 .86 3 .10 3 .23 3 .56 3 .83 4 .13 4 .87 5 .44 1 .43 1 .87 2 .16 2 .35 2 .43 2 .71 2 .84 2 .92 3 .17 3 .44 3 .98 4 .28 4 .51 4 .73 5 .06 5 .31 5 .47 5 .79 6 .08 6 .52 7 .60 8 .61 2 .79 3 .51 3 .89 3 .98 4 .33 4 .48 4 .66
1/8
5/32
Clevis Pins continued on page 10
9 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
5/8
1/2
7/16
3/8
C L E V I S P I N S - Carbon Steel, Plain Finish STOCK SIZES
STOCK CODE
(diameter x length)
CP-154 CP-156 CP-158 CP-160 CP-162 CP-164 CP-166 CP-168 CP-170 CP-172 CP-174 CP-176 CP-178 CP-180 CP-182 CP-184 CP-188 CP-190 CP-192 CP-194 CP-198 CP-200 CP-202 CP-206 CP-212 CP-214 CP-216 CP-218 CP-220 CP-222 CP-224 CP-226 CP-228 CP-230 CP-232 CP-234 CP-236 CP-238 CP-240 CP-242 CP-244 CP-246 CP-258 CP-260 CP-262 CP-264 CP-266 CP-268 CP-270 CP-272 CP-274
3/8 x 1-1/2 3/8 x 1-5/8 3/8 x 1-3/4 3/8 x 1-7/8 3/8 x 2 3/8 x 2-1/8 3/8 x 2-1/4 3/8 x 2-3/8 3/8 x 2-1/2 3/8 x 2-5/8 3/8 x 2-3/4 3/8 x 3 3/8 x 3-1/4 3/8 x 3-1/2 3/8 x 3-3/4 3/8 x 4 7/16 x 1 7/16 x 1-15/64 7/16 x 1-1/4 7/16 x 1-1/2 7/16 x 1-3/4 7/16 x 2 7/16 x 2-1/4 7/16 x 2-1/2 7/16 x 3 7/16 x 3-1/2 7/16 x 4 1/2 x 1 1/2 x 1-1/4 1/2 x 1-27/64 1/2 x 1-1/2 1/2 x 1-3/4 1/2 x 2 1/2 x 2-1/4 1/2 x 2-1/2 1/2 x 2-5/8 1/2 x 2-3/4 1/2 x 3 1/2 x 3-1/2 1/2 x 4 1/2 x 4-1/2 1/2 x 5 5/8 x 1-1/4 5/8 x 1-1/2 5/8 x 1-3/4 5/8 x 2 5/8 x 2-1/4 5/8 x 2-1/2 5/8 x 3 5/8 x 3-1/2 5/8 x 4
Continued from page 9
APPROXIMATE LENGTH UNDER HEAD: To Edge of Hole (effective length)
1 .266 1 .391 1 .516 1 .640 1 .766 1 .891 2 .016 2 .141 2 .266 2 .391 2 .516 2 .766 3 .016 3 .266 3 .516 3 .766 .766 1 .000 1 .016 1 .266 1 .516 1 .766 2 .016 2 .266 2 .766 3 .266 3 .766 .766 1 .016 1 .188 1 .266 1 .516 1 .766 2 .016 2 .266 2 .391 2 .516 2 .766 3 .266 3 .766 4 .266 4 .766 1 .016 1 .266 1 .516 1 .766 2 .016 2 .266 2 .766 3 .266 3 .766
To Center of Hole
1 .344 1 .469 1 .594 1 .719 1 .844 1 .969 2 .094 2 .219 2 .344 2 .469 2 .594 2 .844 3 .094 3 .344 3 .594 3 .844 .844 1 .078 1 .094 1 .344 1 .594 1 .844 2 .094 2 .344 2 .844 3 .344 3 .844 .844 1 .094 1 .266 1 .344 1 .594 1 .844 2 .094 2 .344 2 .469 2 .594 2 .844 3 .344 3 .844 4 .344 4 .844 1 .094 1 .344 1 .594 1 .844 2 .094 2 .344 2 .844 3 .344 3 .844
Approximate Weight/Pounds per 100 Pieces
HOLE SIZE
5/32
5 .06 5 .37 5 .84 6 .19 6 .50 6 .96 7 .13 7 .58 8 .08 8 .36 8 .70 9 .48 10 .44 11 .20 11 .90 12 .54 5 .05 6 .01 6 .07 7 .14 8 .20 9 .19 10 .43 11 .30 13 .40 15 .24 17 .24 6 .32 7 .77 8 .61 9 .00 10 .38 12 .88 13 .02 14 .32 15 .14 15 .68 17 .08 19 .74 22 .36 24 .96 27 .60 13 .30 15 .32 17 .60 19 .26 21 .64 23 .82 28 .04 32 .20 36 .06 Clevis Pins continued on page 11
10 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
PRECISION MADE in the
U.S.A.
COLD HEADING SOLUTIONS
C L E V I S P I N S - Carbon Steel, Plain Finish
3/4
STOCK CODE
CP-284 CP-286 CP-290 CP-296
STOCK SIZES
(diameter x length)
3/4 x 2 3/4 x 2-1/2 3/4 x 3 3/4 x 4
Continued from page 10
APPROXIMATE LENGTH UNDER HEAD: To Edge of Hole (effective length)
1 .766 2 .266 2 .766 3 .766
To Center of Hole
Approximate Weight/Pounds per 100 Pieces
HOLE SIZE
1 .844 2 .344 2 .844 3 .844
5/32
28 .78 34 .90 41 .34 53 .32
PRECISION MADE in the
U.S.A.
C L E V I S P I N S - 302 Stainless Steel, Plain Finish
3/8
5/16
1/4
3/16
STOCK CODE
CP–2SS CP–6SS CP–8SS CP-10SS CP–12SS CP–14SS CP–16SS CP–26SS CP–28SS CP–30SS CP–36SS CP–38SS CP–40SS CP–44SS CP-52SS CP–78SS CP–84SS CP–90SS CP–94SS CP-108SS CP-118SS CP-128SS CP–140SS CP–142SS CP–148SS CP–154SS CP-160SS CP-162SS CP-218SS
STOCK SIZES
(diameter x length)
3/16 x 1/2 3/16 x 5/8 3/16 x 3/4 3/16 x 7/8 3/16 x 1 3/16 x 1-1/4 3/16 x 1-1/2 1/4 x 1/2 1/4 x 5/8 1/4 x 3/4 1/4 x 1 1/4 x 1-1/8 1/4 x 1-1/4 1/4 x 1-1/2 1/4 x 2 5/16 x 3/4 5/16 x 1 5/16 x 1-1/4 5/16 x 1-1/2 5/16 x 2 5/16 x 2-1/2 5/16 x 3 3/8 x 3/4 3/8 x 1 3/8 x 1-1/4 3/8 x 1-1/2 3/8 x 1-7/8 3/8 x 2 1/2 x 1
APPROXIMATE LENGTH UNDER HEAD: To Edge of Hole (effective length)
.359 .484 .609 .734 .859 1 .109 1 .359 .359 .484 .609 .859 .984 1 .109 1 .359 1 .859 .563 .813 1 .063 1 .313 1 .813 2 .313 2 .813 .516 .766 1 .016 1 .266 1 .640 1 .766 .766
To Center of Hole
.406 .531 .656 .781 .906 1 .156 1 .406 .406 .531 .656 .906 1 .031 1 .156 1 .406 1 .906 .625 .875 1 .125 1 .375 1 .875 2 .375 2 .875 .594 .844 1 .094 1 .344 1 .719 1 .844 .855
Approximate Weight/Pounds per 100 Pieces
HOLE SIZE
3/32
.45 .58 .63 .74 .82 1 .03 1 .22 .90 1 .04 1 .20 1 .54 1 .75 1 .87 2 .22 2 .86 1 .87 2 .43 2 .92 3 .44 4 .51 5 .47 6 .52 2 .79 3 .51 4 .33 5 .06 6 .19 6 .50 6 .32
1/8
5/32
your made to free clevis pin Choose a cations! We offer les! ifi mp exact spec assistance and sa ng engineeri ING • GROOV G AMFERIN • END CH TING EN ET D • BALL D STYLES ATIVE HEA • ALTERN ZES L HOLE SI STAINLESS • SPECIA ALLOY & L, N STEE • CARBO N O CATI L HOLE LO • SPECIA T EN TM EA • HEAT TR ES L FINISH • SPECIA T IN R PR • TO YOU
11 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
COLD HEADING SOLUTIONS
Detent Clevis Pins Ball detent depresses and springs up to hold clevis pin in place. Used for assembly speed or hard-to-cotter applications. This fastener lowers labor costs and offers quick release features for flush-mount applications. We can modify ball tension to create the holding force you need!
MADE TO
PRECISION MADE in the
U.S.A.
Made to order, detent clevis pins are based on standard clevis pin head and shank dimensions. Ends are pointed for easy insertion. Pins are typically zinc plated carbon steel and the ball detent is stainless type 302. Pin is also available in stainless, alloy and other materials.
ORDER
Ball compression force can be adjusted at time of manufacture to meet force required to insert and remove. All parts are subject to rigid quality control procedures for long life service.
Length Effective Length
Lynch Pins Made from low carbon steel, zinc plated and yellow chromate dipped, this pin is especially corrosion resistant. Ring is made from hard drawn MB spring wire. The “over center� ring loop attached to the head snaps down hard to hold the fastener in place. A special heavy duty ring is also available for extreme applications. IMPORTED
A
B
D
A
LY N C H P I N S - Zinc with Yellow Chromate APPROXIMATE NOMINAL DIMENSIONS C D E
STOCK CODE
Pin Diameter
Shank Length
Head Height
Head Width
HANG-1 HANG-2 HANG-4 HANG-6 HANG-8 HANG-8L HANG-8HD*
3/16 3/16 1/4 5/16 7/16 7/16 7/16
1-17/64 1-9/16 1-3/4 1-3/4 1-3/4 1-31/32 1-31/32
1/2 1/2 1/2 1/2 9/16 19/32 19/32
11/32 11/32 11/32 13/32 7/16 1/2 1/2
Capture Length
F
Wire Diameter
Approximate Weight/Pounds per 100 Pieces
1-1/16 1-5/16 1-5/16 1-3/8 1-23/64 1-11/16 1-17/32
.118 .138 .138 .138 .138 .138 .197
3 .4 4 .4 5 .5 7 .0 10 .8 12 .0 14 .2
* Zinc plated pin & black oxide ring. Unless otherwise noted, all dimensions are for reference only.
12 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
G F E B
C
COLD HEADING SOLUTIONS
Wire Lock Pins Wire lock pins are like having pin and cotter in one secure assembly. The wire loop is pulled over the pin end to lock it in place or remove it. This one-piece fastener eliminates cotter pin loss and fits most “quick release” applications. Pin made of low carbon steel, wire loop made of hard drawn MB spring wire, zinc plated. IMPORTED
W I R E L O C K P I N S - Zinc Plated E D
F G
B
A Pin Diameter
B Pin Length
C Effective Length
1/4 x 2
.243 - .248
2 .000
1 .750
.091
5/16 x 2-3/4
.306 - .311
2 .750
2 .500
.091
5/16 x 2-3/4
.306 - .311
2 .750
2 .500
3/8 x 2-1/2
.368 - .373
2 .500
2 .250
SIZE
WIRE-1RD WIRE-3SQ WIRE-3RD WIRE-7SQ
C
A
STOCK CODE
D E Wire Loop Diameter Clearance
F Head Diameter
G Head Height
Wire Loop Shape
Approximate Weight/Pounds per 100 Pieces
1 .625
.562
1 .750
.625
.312
round
.312
square
6 .5 10 .6 10 .6 12 .5
.091
2 .000
.625
.312
round
.091
1 .500
.625
.312
square
Unless otherwise noted, all dimensions are for reference only.
Plated Steel Crimp
Head View
INS IN OUR P KEEP Y ITH NYLON W PLACE YARDS! LAN -27 . ges 26 See pa
End View
Tab Lock Pins Even easier to use than standard wire lock pins. Pull up on tab to remove, push down on wire loop to lock. Tab acts as a load ramp which guides wire loop to a locked position when installing. Pin made of low carbon steel, wire loop made of hard drawn MB spring wire, zinc plated.
E
D C
F A G
30°
TA B L O C K P I N S - Zinc Plated STOCK CODE
SIZE
A Pin Diameter
B C D E F G H Wire Pin Effective Wire Loop Head Head Top of Wire Loop Length Length Diameter Clearance Diameter Height to Tab End Shape
T-LOCK-1RD
1/4 x 2
.243 - .248
2 .00
1 .750
.091
1 .625
.562
.312
2-3/4
round
T-LOCK-8SQ
3/8 x 2-3/4
.368 - .373
2 .75
2 .25
.091
1 .500
.625
.312
2-3/4
square
Approximate Weight/Pounds per 100 Pieces
6 .8 13 .8
Unless otherwise noted, all dimensions are for reference only.
B
End View
IMPORTED
H
13 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
Detent Ring Pins Ball detent depresses and springs up for “quick release” applications. Used as a convenient way to adjust or remove accessories on equipment.
PRECISION MADE in the
U.S.A.
Stock sizes imported .
We can modify ball compression to create the holding force you need!
Standard sizes are made from low carbon steel, zinc plated. Rigid quality control procedures ensure a consistent fastener you can count on. STAINLESS AVAILABLE
Approx. Ring Diameter
DETENT RING PIN SPECS Nominal Pin Diameter A
Diameter Tolerances Before Plating Cold Finished Rounds Carbon Steel Stainless
Pull Ring Diameter (inches)
End Chamfer Length x 15 Deg . (inches)
B (inches) REF .
3/16
.1855 - .1875
.1865 - .1885
7/8
.078
.224
1/4
.2480 - .2500
.2490 - .2510
1
.094
.271
5/16
.3105 - .3125
.3110 - .3140
1
.125
.333
3/8
.3730 - .3750
.3735 - .3765
1
.141
.381
7/16
.4355 - .4375
.4360 - .4390
1
.156
.459
1/2
.4980 - .5000
.4980 - .5020
1-1/4
.172
.506
5/8
.6230 - .6250
.6230 - .6270
1-1/4
.188
3/4
.7480 - .7500
.7480 - .7520
1-1/2
.188
.553
(Mid-Ring)
A Effective Length
15°
B
.615
For 1/4 ball
For 5/16 ball
.615
.678
For 5/16 ball
For 3/8 ball
End Chamfer
Plating will typically add .0002” - .0005” to diameter .
Maximum Ball Height
D E T E N T R I N G P I N S - Zinc Plated
1/4
3/16
STOCK CODE
DRI-1 DRI-2 DRI-3 DRI-4 DRI-5 DRI-6 DRI-11 DRI-12 DRI-13 DRI-14 DRI-15 DRI-16 DRI-17 DRI-18 DRI-19 DRI-20
STOCK SIZES
(diameter x effective length)
Ball Diameter
3/16 x 13/16 3/16 x 1 3/16 x 1-5/16 3/16 x 1-1/2 3/16 x 1-13/16 3/16 x 2 1/4 x 3/4 1/4 x 1 1/4 x 1-1/4 1/4 x 1-1/2 1/4 x 1-3/4 1/4 x 2 1/4 x 2-1/4 1/4 x 2-1/2 1/4 x 2-3/4 1/4 x 3
Maximum Ball Height Above Shank
Approximate Ball Compression Force, lbs.*
Approximate Weight/Pounds per 100 Pieces
1 .50 1 .65 1 .90 2 .04 2 .30 2 .43 2 .20 2 .56 2 .90 3 .25 3 .60 3 .95 4 .30 4 .64 5 .00 5 .34
3/32
.028
3
1/8
.038
6
* Ball Compression Force is the force required to compress ball flush to shank .
Detent Ring Pins continued on page 15
14 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
D E T E N T R I N G P I N S - Zinc Plated
DRI-29 DRI-29A DRI-30 DRI-31 DRI-32 DRI-33 DRI-34 DRI-35 DRI-36 DRI-38 DRI-39 DRI-49 DRI-49A DRI-50 DRI-51 DRI-52 DRI-53 DRI-54 DRI-55 DRI-56 DRI-57 DRI-58 DRI-59 DRI-70 DRI-74 DRI-75 DRI-76 DRI-77 DRI-78 DRI-91 DRI-93 DRI-95 DRI-97 DRI-99
STOCK SIZES
(diameter x effective length)
Ball Diameter
Maximum Ball Height Above Shank
5/32
.047
8
3/16
.056
10
7/32
.066
10
1/4
.075
10
5/16 x 5/8 5/16 x 3/4 5/16 x 1 5/16 x 1-1/8 5/16 x 1-1/2 5/16 x 1-5/8 5/16 x 2 5/16 x 2-1/8 5/16 x 2-1/2 5/16 x 3 5/16 x 3-1/8 3/8 x 5/8 3/8 x 3/4 3/8 x 1 3/8 x 1-1/8 3/8 x 1-1/2 3/8 x 1-5/8 3/8 x 2 3/8 x 2-1/8 3/8 x 2-1/2 3/8 x 2-5/8 3/8 x 3 3/8 x 3-1/8 7/16 x 1 7/16 x 2 7/16 x 2-1/16 7/16 x 2-1/2 7/16 x 2-9/16 7/16 x 3 1/2 x 1 1/2 x 1-1/2 1/2 x 2 1/2 x 2-1/2 1/2 x 3
Approximate Weight/Pounds per 100 Pieces
PRECISION MADE in the
U.S.A.
3 .30 3 .59 4 .14 4 .40 5 .22 5 .50 6 .31 6 .50 7 .40 8 .49 8 .70 4 .14 4 .53 5 .31 5 .71 6 .88 7 .29 8 .44 8 .84 10 .01 10 .40 11 .57 11 .96 7 .66 11 .92 12 .20 14 .04 14 .30 16 .18 10 .10 12 .90 15 .70 18 .50 21 .30
* Ball Compression Force is the force required to compress ball flush to shank .
a ll
u po n o
ur
Choose a detent pin made to your exact specifications!
C
1/2
7/16
3/8
5/16
STOCK CODE
Continued from page 14
Approximate Ball Compression Force, lbs.*
BALL DETENTING EXPERTISE!
Ball compression can be modified to create the holding force you need . We can assist you with engineering and provide free samples .
15 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
Positive Lock Pins Positive Lock Pins have a push button that initiates ball action and retraction. Positive locking design combines secure fastening with “quick release” ease of removal. Double locking-ball design increases retention capabilities.
PRECISION MADE in the
U.S.A.
Our unique design features both a one-piece, cold formed body and spindle for increased durability. See product features below! Stocked in heat treated alloy steel for strength and durability. Standard finish is Zinc with Yellow Chromate. Other finishes available.
POSITIVE LOCK PINS SPECIAL CONFIGURATIONS AVAILABLE
STOCK CODE
POSITIVE LOCK PIN FEATURES One-Piece Push Button/Spindle
Zinc/Yellow Chromate Finish for Corrosion Resistance
One-Piece, Cold Formed Head/Body - Alloy Steel Heat Treated
PL4-500 PL4-750 PL4-1000 PL4-1250 PL4-1500 PL5-1000 PL5-1250 PL5-1500 PL5-1750 PL5-2000 PL6-1000 PL6-1250 PL6-1500 PL6-1750 PL6-2000 PL6-2250 PL6-2500 PL8-1000 PL8-1500 PL8-1750 PL8-2000 PL8-2500 PL8-3000 PL8-3500
440C Stainless Steel Balls Hardened to Rc 58-62
Heavy-Duty Stop Collar
HIGH QUALITY COMMERCIAL EQUIVALENT!
F D
A B
G
E
C
POSITIVE LOCK PIN SPECS Shank Diameter A
Ball Height B
Chamfer Length x Deg C
End Length D
Effective Length E
Top Length F
Head Diameter G
Approximate Double Shear/Pounds
1/4 ( .2455/ .2485)
.284/ .294
.093 x 22°
.312
as required
.870
.700
8,200
5/16 ( .308/ .311)
.370/ .380
.125 x 22°
.312
as required
.870
.800
12,800
3/8 ( .3705/ .3735)
.435/ .445
.125 x 22°
.375
as required
.900
.860
18,400
1/2 ( .4955/ .4985)
.589/ .599
.125 x 22°
.437
as required
1 .125
1 .000
32,800
STOCK SIZES
(diameter x effective length)
1/4 x 1/2 1/4 x 3/4 1/4 x 1 1/4 x 1-1/4 1/4 x 1-1/2 5/16 x 1 5/16 x 1-1/4 5/16 x 1-1/2 5/16 x 1-3/4 5/16 x 2 3/8 x 1 3/8 x 1-1/4 3/8 x 1-1/2 3/8 x 1-3/4 3/8 x 2 3/8 x 2-1/4 3/8 x 2-1/2 1/2 x 1 1/2 x 1-1/2 1/2 x 1-3/4 1/2 x 2 1/2 x 2-1/2 1/2 x 3 1/2 x 3-1/2
die-ca inc alloy ting . Strong z coa r e powd durable ILS! T R DE A CALL FO
16 800.222.2231
2 .84 3 .19 3 .54 3 .89 4 .24 5 .37 5 .90 6 .42 6 .94 7 .44 7 .70 8 .48 9 .25 10 .03 10 .80 11 .58 12 .35 13 .65 16 .45 17 .85 19 .25 22 .05 24 .85 27 .65
andle! H T a h ADD sting wit
Unless otherwise noted, all dimensions are for reference only.
PIVOT POINT INC.
Approximate Weight/Pounds per 100 Pieces
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
Pull Pins STAINLESS AVAILABLE
PRECISION MADE in the
Body is threaded into application, with ring on outside surface. Pull ring to retract spring-loaded tip and allow adjustments. Release ring to lock tip into desired hole location. Chamfered tip allows for easy alignment. Ideal for adjustable tubing, tooling, latches, fixtures, gates and much more. Our unique design features a one-piece, case hardened, spindle for maximum strength and durability. This one-piece design also translates into lower production costs. A superior design at a lower price!
U.S.A.
PULL PIN DEMO
Stock sizes are low carbon steel, zinc plated. Special sizes and materials are available. B
Install Pull Pin into pre-tapped hole in material .
C
For lighter gauge materials, a nut may be welded to outside of material . The Pull Pin then threads into the nut .
P U L L P I N S - Zinc Plated Nominal Thread Diameter
RET-250* RET-375 RET-500 RET-625
Approximate Weight/Pounds per 100 Pieces
1/4 3/8 1/2 5/8
D
G
Pull ring to retract tip and allow for adjustments . Release ring, and plunger locks into desired hole position .
STOCK CODE
F
E
A
Ring 0/
UNC-2A Thread
Retaining Ring
PULL PIN SPECS Approximate Pull Force, lbs .
Nominal Thread Diameter
Initial
Final
A
1/4
.50
2 .00
1/4-20
3/8
.75
3 .00
1/2
1 .00
5/8
1 .25
B
C
D
E
F
G
.44
.19
.16
.25
.31
.875
3/8-16
.63
.28
.25
.38
.44
.875
4 .00
1/2-13
.81
.38
.31
.50
.56
1 .00
5 .00
5/8-11
1 .00
.44
.38
.62
.69
1 .00
Unless otherwise noted, all dimensions are for reference only.
.98 2 .00 4 .50 8 .50
* RET-250 plunger is not hardened.
IN A PULL P CHOOSE UR EXACT O YO MADE T ATIONS! SPECIFIC
Size Special al/Finish t Materi Differen e Pull Forc Special 1/4 Turn
Style
More!
See next page for the
NEW
Extended Locking Pull Pin!
17 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
NEW!
Extended Locking Pull Pins
PATENT PENDING
MADE TO
PRECISION MADE in the
ORDER
U.S.A.
Our NEW Extended Locking Pull Pin features a retractable tip that locks into an extended (forward) position automatically. Conventional spring-loaded pull pins do not lock forward, allowing unintended retraction and disengagement due to vibration, movement and irregular mating holes. Our new forward-locked design means that the tip remains in an extended, locked position until manually disengaged by pulling the ring. Available options are illustrated below.
EXTENDED LOCKING PULL PIN DEMO
Tip is automatically locked forward until ring is pulled to retract .
Alternate design locks in both forward and retracted position
Alternate style also locks in retracted position . Available with multiple locking positions .
18 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
QUICK RELEASE SOLUTIONS
Ball Plungers/SpringLoaded Devices Non-threaded design push-fits into hole. Spring-loaded ball forms bearing surface which retracts and then snaps into opposing hole or groove. Use for locating or positioning in drawers, doors, dies and other fixtures. Specials available in a variety of sizes, materials and finishes. Stock sizes are low carbon steel, black oxide finish with a 300-series stainless steel ball.
PRECISION MADE in the
U.S.A.
D
A B
C
B A L L P L U N G E R S / S P R I N G - L O A D E D D E V I C E S - Black Oxide Finish STOCK CODE
STOCK SIZES
BP4-471 BP6-786
1/4 3/8
Pull Force, lbs . Initial
Final
A
B
C
D
3 5
7 14
.250 .375
.471 .786
.187 .313
.312 .500
Approximate Weight/Pounds per 100 Pieces
.56 1 .69
Unless otherwise noted, all dimensions are for reference only.
BALL PLUNGER/SPRING-LOADED DEVICE DEMO
DEVICE RING-LOADED DESIGN A SP R U MADE TO YO IFICATIONS! C A EX T SPEC assistance in g en eering We offer free samples! and
Install Ball Plunger into push-fit hole in material . Spring-loaded ball automatically depresses to allow adjustments .
Spring-loaded ball then snaps back into the desired hole, groove or indentation .
Special Size Shape Special Body
h aterial/Finis Different M Force Compression Higher/Lower More!
19 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
SCREW MACHINE SOLUTIONS
Ring Pins Convenient, removable pin designed with a cotter hole for a secure application. Used typically with a hair pin cotter or Bow-Tie Cotter, Ring Pins afford quick and secure fastening. Available with or without a stop collar in various styles and sizes.
MADE TO
PRECISION MADE in the
ORDER
U.S.A.
Standard material is low carbon steel, zinc plated. Available in higher carbon steel which can be heat treated, or corrosionresistant stainless steel.
Check out our patented Bow-Tie Locking Cotters™ on page 28-29.
RING PIN SPECS
Ring Diameter
Nominal Pin Diameter A
(Mid-Ring)
A Shank Diameter Effective Length
Hair Spring Cotter
End Chamfer
Diameter Tolerances Before Plating Cold Finished Rounds Carbon Steel Stainless
Ring Pin Diameter (inches)
End Chamfer Length (inches)
Pivot Point Standard Hole Diameter
Recommended Bow-Tie Cotter™* (pages 28-29)
3/16
.1855 - .1875
.1865 - .1885
7/8
.078 x 15°
3/32
Bow-54
1/4
.2480 - .2500
.2490 - .2510
1
.094 x 15°
3/32
Bow-54 Bow-72
5/16
.3105 - .3125
.3110 - .3140
1
.125 x 15°
1/8
Bow-72 Bow-91
3/8
.3730 - .3750
.3735 - .3765
1
.141 x 15°
9/64
Bow-91
7/16
.4355 - .4375
.4360 - .4390
1
.156 x 15°
5/32
Bow-91-8 Bow-120
1/2
.4980 - .5000
.4980 - .5020
1-1/4
.172 x 15°
5/32
Bow-91-8 Bow-120
5/8
.6230 - .6250
.6230 - .6270
1-1/4
.188 x 15°
5/32
Bow-120-10 Bow-148-10
3/4
.7480 - .7500
.7480 - .7520
1-1/2
.188 x 25°
3/16
Bow-120-12 Bow-148-12 *NOTE: See page 28 for recommended hole sizes for use with Bow-Tie Cotter™ Pins
Plating will typically add .0002” - .0005” to diameter. Unless otherwise noted, all dimensions are for reference only.
C
B
Washer Collars
A
Standard zinc plated flat washers stamped firmly into a groove for a permanent stop. Assembly is completely plated.
Pin Diameter
Washer Dimensions O .D . Thickness A B
3/16
7/16
.047
1/4
9/16
.047
5/16
3/4
.062
3/8
7/8
.078
7/16
1
.078
1/2
1-1/4
.078
5/8
1-1/2
.109
3/4
1-1/2
.109
W
Crimp Collars
D
Crimp collars are small diameter retaining rings made of ductile 1010 carbon steel. Pressed into a groove, the collar is generally free to rotate, yet strong against end thrust. Assembly is completely plated.
Unless otherwise noted, all dimensions are for reference only.
Collar Dimensions O .D . Installed Thickness W D
Headed Collars One piece cold formed pin and collar for the highest durability.
A
Pin Diameter
O .D . A
Collar Thickness B
Length C
3/16
5/16
.060
.410
1/4
7/16
.090
.410
5/16
1/2
.090
.750
.031
3/8
5/8
.100
.750
.406
.039
7/16
3/4
.125
.750
3/8
.500
.047
1/2
7/8
.125
.750
7/16
.594
.055
1/2
.688
.063
5/8
.859
.078
3/4
1 .031
.094
Pin Diameter
3/16
.250
.031
1/4
.312
5/16
Unless otherwise noted, all dimensions are for reference only.
Unless otherwise noted, all dimensions are for reference only.
20 PIVOT POINT INC.
B
800.222.2231
PIVOTPINS.COM
SCREW MACHINE SOLUTIONS
Bent Arm Pins available Specials ns: ecificatio sp r to you
PRECISION MADE in the
Hair pin cotters sold separately. See page 32.
ES • GROOV IALS L MATER • SPECIA ES H IS N L FI • SPECIA E! R O • AND M
U.S.A.
Pin with bent handle provides one-piece configuration. Here’s a low cost pin available with a hole or groove for applications requiring frequent removals. Made as a standard with a hole, in low carbon steel, zinc plated. Also available with grooves, higher strength material or heat treated.
B E N T A R M P I N S - Zinc Plated 25°
D
STOCK CODE
3” Straight Usable Length
BENT8-300 BENT10-300
1-1/2”
STOCK SIZES
1/2 x 3 5/8 x 3
STYLE
Pin Diameter A
Hole Diameter B
Chamfer Length C
Hole O .C . from End D
Use Cotter Number
Hole Hole
.500 .625
5/32 3/16
.187 .187
.375 .437
HAIR-8 HAIR-10
Approximate Weight/Pounds per 100 Pieces
32 50
Unless otherwise noted, all dimensions are for reference only.
A
25°
B C
Headless Pins Made to order with holes or grooves, this versatile fastener can be made from various materials to fit your application. Usually made in low carbon steel. Higher strength carbon or alloy steel and corrosion resistant stainless 303 are available.
MADE TO
PRECISION MADE in the
ORDER
U.S.A.
HEADLESS PIN STANDARD SPECS Shank Diameter A
Diameter Tolerances Before Plating Cold Finished Rounds Carbon Steel Stainless
With Holes Hole Diameter B
Hole Location O .C . to End of Pin C
End Chamfer Length x Deg . D
3/16
.1855 - .1875
.1865 - .1885
3/32
.094
.016 x 45°
1/4
.2480 - .2500
.2490 - .2510
3/32
.094
.016 x 45°
5/16
.3105 - .3125
.3110 - .3140
1/8
.125
.016 x 45°
3/8
.3730 - .3750
.3735 - .3765
9/64
.156
.031 x 45°
7/16
.4355 - .4375
.4360 - .4390
5/32
.156
.031 x 45°
1/2
.4980 - .5000
.4980 - .5020
5/32
.156
.031 x 45°
5/8
.6230 - .6250
.6230 - .6270
5/32
.156
.031 x 45°
3/4
.7480 - .7500
.7480 - .7520
5/32
.156
.047 x 45°
(Effective Length) B A
D C
Plating will typically add .0002” - .0005” to diameter. Unless otherwise noted, all dimensions are for reference only.
21 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
C A B L E A S S E M B LY S O L U T I O N S
Steel Lanyards PRECISION MADE in the
U.S.A.
Advancements in automation enable us to manufacture high quality steel lanyards with FAST delivery at prices competitive with imports!
Pivot Point offers a selection of high-quality lanyard assemblies 3/64 to 1/8 cable diameter for light duty retention. These lanyards are typically attached to pins and other fasteners to prevent loss. STAINLESS AVAILABLE
All Pivot Point standard lanyards are made from 7x7 aircraft cable chosen for its strength and flexibility. Stock sizes are available in galvanized steel cable, bare or coated with polyvinyl chloride (PVC) or nylon. PVC coating is more popular because of its appearance, flexibility, and low cost. Nylon offers more durability and abrasion resistance.
RD A LANYA T CHOOSE AC X E R O YOU MADE T S! N IO T A SPECIFIC ctions
Lanyard Length
ru ble Const Other Ca Styles Lanyard tions Termina details! Call for
Loop Size
Type 1 Type 1-A Type 2 Type 3
STEEL LANYARD SPECS Cable Diameter
Standard Loop Size (inches)
Standard Eyelet Diameter (inches)
Minimum Breaking Strength (lbs .) (Cable Only)
Approx . Breaking Strength (lbs .) (Lanyard Assemblies)
3/64
3/4
.190
270
215
1/16
7/8
.190
480
385
3/32
1 or 1-1/4 (min .)*
.250
920
735
1/8
1-1/2 (min .)
.316
1700
1350
Cross section of 7x7 cable construction.
Optional stop sleeve available. Price on application, please call for pricing.
Unless otherwise noted, all dimensions are for reference only. * 1” min. for stripped loops, 1-1/4” min. for unstripped loops.
S T E E L L A N YA R D S STOCK CODE
STOCK SIZES Cable Diameter x Length
L47B-600-1 L47P-600-1 L47N-600-1 L47B-600-2 L47P-600-2 L47N-600-2 L47B-600-3 L47P-600-3 L47N-600-3 L62B-600-1 L62P-600-1 L62N-600-1 L62B-600-2 L62P-600-2 L62N-600-2 L62B-600-3 L62P-600-3 L62N-600-3
3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 3/64 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6 1/16 x 6
Coating
Bare cable PVC to 1/16 Nylon to 1/16 Bare cable PVC to 1/16 Nylon to 1/16 Bare cable PVC to 1/16 Nylon to 1/16 Bare cable PVC to 3/32 Nylon to 3/32 Bare cable PVC to 3/32 Nylon to 3/32 Bare cable PVC to 3/32 Nylon to 3/32
Type
Type 1
Type 2
Type 3
Type 1
Type 2
Type 3
Approximate Weight/Pounds per 100 Pieces
.42 .50 .51 .59 .65 .66 .75 .80 .81 .75 .95 1 .10 1 .20 1 .26 1 .38 1 .48 1 .59 1 .67
22 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
C A B L E A S S E M B LY S O L U T I O N S
Bulk Cable Bulk aircraft cable cut to length or on spools is available from stock in galvanized steel or stainless, bare or coated. Construction is 7x7 aircraft quality for strength and flexibility.
ALSO STOCKED IN STAINLESS
B U L K C A B L E - Galvanized Steel STOCK CODE
GAC-47-B GAC-47-P GAC-47-N GAC-62-B GAC-62-P GAC-62-N GAC-94-B GAC-94-P GAC-94-N GAC-125-B GAC-125-P GAC-125-N
SIZE/COATING 7 x 7 Construction Galvanized Steel Cable
Minimum Breaking Strength (lbs.)
3/64 Bare Cable 3/64 PVC Coated To 1/16 3/64 Nylon Coated To 1/16 1/16 Bare Cable 1/16 PVC Coated To 3/32 1/16 Nylon Coated To 3/32 3/32 Bare Cable 3/32 PVC Coated To 1/8 3/32 Nylon Coated to 1/8 1/8 Bare Cable 1/8 PVC Coated To 3/16 1/8 Nylon Coated to 3/16
270 270 270 480 480 480 920 920 920 1700 1700 1700
Approximate Weight/Pounds per 100 Ft.
.42 .52 .54 .75 1 .00 1 .20 1 .60 2 .10 2 .30 2 .85 4 .00 4 .50
Unless otherwise noted, all dimensions are for reference only.
BULK CABLE - Stainless Steel (300 Series) STOCK CODE
SAC-47-B SAC-47-P SAC-47-N SAC-62-B SAC-62-P SAC-62-N SAC-94-B SAC-94-P SAC-94-N SAC-125-B
SIZE/COATING 7 x 7 Construction Stainless Steel Cable
Minimum Breaking Strength (lbs.)
3/64 Bare Cable 3/64 PVC Coated To 1/16 3/64 Nylon to 1/16 1/16 Bare Cable 1/16 PVC Coated To 3/32 1/16 Nylon Coated To 3/32 3/32 Bare Cable 3/32 PVC Coated To 1/8 3/32 Nylon Coated to 1/8 1/8 Bare Cable
270 270 270 480 480 480 920 920 920 1700
Approximate Weight/Pounds per 100 Ft.
.42 .52 .54 .75 1 .00 1 .20 1 .60 2 .10 2 .30 2 .85
Unless otherwise noted, all dimensions are for reference only.
Make your own cable assemblies in house! See pages 24 & 25 for terminals and crimp tool.
23 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
C A B L E A S S E M B LY S O L U T I O N S
Bulk Terminals Bulk lanyard components available from stock. Purchase what you need to make your own assemblies. High quality precision parts will do the job right. Oval sleeves, stop sleeves and lanyard tabs can be assembled with our cable crimp tool. Steel stamped eyes require special assembly equipment. We will advise correct assembly procedures for your application.
PRECISION MADE in the
U.S.A.
A L U M I N U M O VA L S L E E V E S Aluminum oval sleeves are designed to hold beyond the break strength of the cable. Sleeves should be crimped directly on the cable, not on the coating. A sleeve crimped on a coated cable is only as strong as the coating. For maximum hold, a large press is used for assembly. Hand crimp tools serve many applications, but generally do not produce an assembly which exceeds the breaking strength of the cable.
B A D E C
Approximate Weight/Pounds per 100 Pieces
Dimensions
Fits Bare Cable Diameter
Material
A
B
C
D
E
SLA-47
3/64
Aluminum
.149
.375
.055
.116
.045
.05
SLA-62
1/16
Aluminum
.175
.375
.085
.160
.050
.08
SLA-94
3/32
Aluminum
.281
.500
.121
.253
.080
.26
SLA-125
1/8
Aluminum
.343
.625
.156
.313
.093
.66
STOCK CODE
Unless otherwise noted, all dimensions are for reference only.
S T E E L S TA M P E D E Y E S - Zinc Plated B
Steel stamped eyes require special equipment for assembly. These rugged terminals are used widely to mount cable assemblies to equipment. Not to be confused with electrical terminals. Material: cold rolled steel (carbon or stainless).
C
A
E
D
Fits Bare Cable Diameter
Material
A
B
C
D
E
Approximate Weight/Pounds per 100 Pieces
EYE-47-1
3/64
CR Steel
.190
.725
.215
.060
.340
.28
EYE-62-1
1/16
CR Steel
.190
.987
.317
.060
.460
.57
EYE-62-2
1/16
CR Steel
.260
.987
.317
.060
.460
.55
EYE-94-2
3/32
CR Steel
.250
1 .420
.390
.090
.500
1 .92
EYE-94-3
3/32
CR Steel
.375
1 .310
.450
.093
.750
2 .04
EYE-47S-1
3/64
300 Series S .S .
.190
.725
.215
.060
.340
.28
EYE-62S-1
1/16
300 Series S .S .
.190
.987
.317
.060
.460
.57
EYE-62S-2
1/16
300 Series S .S .
.260
.987
.317
.060
.460
.55
EYE-94S-2
3/32
300 Series S .S .
.250
1 .420
.390
.090
.500
1 .92
EYE-94S-3
3/32
300 Series S .S .
.375
1 .310
.450
.093
.750
2 .04
STOCK CODE
Dimensions
Unless otherwise noted, all dimensions are for reference only.
L A N YA R D M O U N T I N G TA B A
C
E B
D
STOCK CODE TAB-62-S
Fits Bare Cable Diameter 3/64 - 1/8
Lanyard tabs are made of 300 series stainless. This versatile mounting tab is usually used in conjunction with a loop end. A
B
C
D
E
Approximate Weight/Pounds per 100 Pieces
.190
1 .262
.375
.062
15째
.63
Dimensions Material 300 Series S .S .
Unless otherwise noted, all dimensions are for reference only.
Bulk Terminals continued on page 25
24 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
C A B L E A S S E M B LY S O L U T I O N S
Bulk Terminals continued from page 24
STOP SLEEVES D
Stop sleeves are used in “hanger”-type applications where assemblies can be removed easily. A low cost terminal stop sleeve can be installed using a hand crimp tool.
A
B
C
A
B
C
D
Approximate Weight/Pounds per 100 Pieces
STP-47C
3/64
Copper
.172
.055
.063
.218
.15
STP-62A
1/16
Aluminum
.247
.088
.075
.225
.06
STP-94A
3/32
Aluminum
.347
.120
.110
.350
.23
STP-125A
1/8
Aluminum
.343
.101
.140
.350
.21
Dimensions
Fits Bare Cable Diameter
STOCK CODE
Material
Unless otherwise noted, all dimensions are for reference only.
THIMBLES A
C
Thimbles are used in conjunction with a lanyard loop to increase cable life by increasing wear resistance as well as distributing the load on the cable over a larger area.
D
E
B
Fits Bare Cable Diameter
Material
A
B
C
D
E
Approximate Weight/Pounds per 100 Pieces
TIM-62
1/16 - 5/64
CR Steel
.969
.35
.703
.094
.078
.15
TIM-62S
1/16 - 5/64
300 Series S .S .
.969
.35
.703
.094
.078
.15
TIM-94
3/32 - 1/8
CR Steel
1 .000
.35
.703
.141
.078
.43
TIM-94S
3/32 - 1/8
300 Series S .S .
1 .000
.35
.703
.141
.078
.43
STOCK CODE
Dimensions
Unless otherwise noted, all dimensions are for reference only.
Cable Cutter & Crimp Tool Make your own cable assemblies in house using this versatile and durable tool. The dual purpose Cutter/ Crimping tool tightly crimps Aluminum Oval and Stop Sleeves, and features a built-in cable cutter. Cuts cleanly without fraying the end of the cable.
WARNING: Always wear eye protection when using this tool.
CABLE CUTTER/CRIMP TOOL STOCK CODE CCT-WCI
Description
Crimping Range
Length
Weight Each (lbs.)
Cable Cutter/Crimp Tool
1/32”, 3/64”, 1/16”
9”
.75
25 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
INJECTION MOLDING SOLUTIONS
Nylon Lanyards™ Keep pins, fasteners and other components where they belong with Nylon Lanyards™. This low cost alternative to steel lanyards offers light-duty retention and loss prevention. Available from stock in various styles and lengths. Made from super tough nylon resin. Available in fixed end and U-lock styles with various configurations.
PRECISION MADE in the
U.S.A.
Fixed End Style Supplied in either Type 1, Type 2 or Type 3 configurations with molded (fixed) loops and eyelets. Attach loop to rings of pins being retained. Rivet eyelet to equipment. Or, devise your own methods of attachment. These three styles offer unlimited possibilities! Stocked in 6”, 8”, 10” and 12” lengths. B
Type 1
Type 2
C
Type 3
F I X E D E N D N Y L O N L A N YA R D S STOCK CODE
NL93F-6-1 NL93F-8-1 NL93F-10-1 NL93F-12-1 NL93F-6-2-20 NL93F-6-2-26 NL93F-8-2-20 NL93F-8-2-26 NL93F-10-2-20 NL93F-10-2-26 NL93F-12-2-20 NL93F-12-2-26 NL93F-6-3-2020 NL93F-6-3-2026 NL93F-6-3-2626 NL93F-8-3-2020 NL93F-8-3-2026 NL93F-8-3-2626 NL93F-10-3-2020 NL93F-10-3-2026 NL93F-10-3-2626 NL93F-12-3-2020 NL93F-12-3-2026 NL93F-12-3-2626
SIZE Diameter x Length
.093 x 6” .093 x 8” .093 x 10” .093 x 12” .093 x 6” .093 x 6” .093 x 8” .093 x 8” .093 x 10” .093 x 10” .093 x 12” .093 x 12” .093 x 6” .093 x 6” .093 x 6” .093 x 8” .093 x 8” .093 x 8” .093 x 10” .093 x 10” .093 x 10” .093 x 12” .093 x 12” .093 x 12”
*Packaged only in 100 piece bags .*
Type
Approximate Break Strength (lbs.)
O/A Length B
Type 1 Type 1 Type 1 Type 1 Type 2 Type 2 Type 2 Type 2 Type 2 Type 2 Type 2 Type 2 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3 Type 3
35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
6 .00 8 .00 10 .00 12 .00 6 .00 6 .00 8 .00 8 .00 10 .00 10 .00 12 .00 12 .00 6 .00 6 .00 6 .00 8 .00 8 .00 8 .00 10 .00 10 .00 10 .00 12 .00 12 .00 12 .00
Eyelet I.D. C
N/A N/A N/A N/A .20 .26 .20 .26 .20 .26 .20 .26 .20 .20 & .26 .26 .20 .20 & .26 .26 .20 .20 & .26 .26 .20 .20 & .26 .26
Unless otherwise noted, all dimensions are for reference only.
26 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
Approximate Weight/Pounds per 100 Pieces
.30 .38 Not Stocked
.48 .28 .30 Not Stocked
.37 Not Stocked
.37 Not Stocked
.48 Not Stocked
.25 .31 Not Stocked
.33 .37 Not Stocked
.38 .38 Not Stocked Not Stocked
.45
INJECTION MOLDING SOLUTIONS
Nylon Lanyards™
STATES P ED
CE
PRECISION MADE in the
U.S.A.
ARK OFF I EM
B
C Type 1
H G
A
D B
C Type 2
U .S . Patent No . 5,784,760
One end is a loop, supplied open. Attach to component, then “snap” together! Loop is permanently locked. Available with either a molded loop or eyelet on the other end. Stocked in 10” (assembled) lengths.
& ENT TRAD AT
UNI T
U-Lock Style
A
F
E
D
U - L O C K N Y L O N L A N YA R D S
*Packaged only in 100 piece bags .*
H
Assembled Length
Approx. Break Strength (lbs.)
Approximate Weight/Pounds per 100 Pieces
1 .50 2 .50 ---
10” 9” 10” 10”
35 35 35 35
.569 .525 .575 .564
DIMENSIONS
STOCK CODE
Type
A
B
C
D
E
F
G
NL93-10-100 NL93-10-125 NL93-10-220 NL93-10-226
Type 1 Type 1 Type 2 Type 2
.093 .093 .093 .093
8” 7” 8” 8”
4” 4” 4” 4”
.50 .50 .50 .50
-- .473 .473
-- .20 .26
0 .34 1 .00 ---
Unless otherwise noted, all dimensions are for reference only.
Press Lock Rivets Press-Lock Rivets are a one-piece molded “rivet” to be used in conjunction with Nylon Lanyards. Insert through eyelet end of Lanyard and press into threaded, non-threaded, drilled or punched holes. Ribs deflect upon insertion and spring back for a secure lock. Made from 6/6 nylon in natural color.
B C A
PRESS LOCK RIVETS STOCK CODE
Size
PL-250-10 PL-250-12
1/4 x 5/8 1/4 x 3/4
Required Hole Size
.250 .250
A
B
C
Approximate Weight/Pounds per 100 Pieces
.625 .750
.125 .250
.500 .500
.1020 .1265
Unless otherwise noted, all dimensions are for reference only.
27 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
CE
STATES P ED
PRECISION MADE in the
U.S.A.
BOW-TIE LOCKING COTTER™ PIN SPECS
ARK OFF I EM
Stock Code
Bow-54
C
Bow-72
D B
A
B O W- T I E S - Zinc Plated STOCK CODE
Bow-54 Bow-72 Bow-91 Bow-91-8 Bow-120 Bow-120-10 Bow-148-10 Bow-120-12 Bow-148-12 Bow-177-16
Fits Shaft Size
Approximate Weight/Pounds per 100 Pieces
.15 .39 .89 .87 2 .20 2 .20 4 .27 2 .16 4 .23 7 .96
3/16 - 1/4 1/4 - 3/8 5/16 - 3/8 7/16 - 1/2 7/16 - 1/2 5/8 5/8 3/4 3/4 1
B O W- T I E S - 410 Stainless Steel STOCK CODE
Bow-72S-410 Bow-91S-410
Fits Shaft Size
1/4 - 3/8 5/16 - 3/8
U .S . Patent No . 6,135,693 and D431,181
The Bow-Tie Locking Cotter™ works like a hair pin cotter but locks itself on! Push or pull cotter leg into hole, Bow-Tie snaps into a zero-tension locked position. It is released by lifting loop and sliding off, but reduces the risk of being accidentally knocked or vibrated off, as with hair pin cotters. Made from hard drawn MB spring wire with a protective and attractive zinc plated finish. Use in any hole location to ensure secure fastening.
& ENT TRAD AT
UNI T
Bow-Tie Locking Cotters™
Approximate Weight/Pounds per 100 Pieces
.39 .89
Fits Shaft Sizes
Recommended Minimum Hole Dia .
A
B
C
D
3/16
.072
.054
.182
1 .000
.200
1/4
.072 .072
.250
1 .375
.260
.091
.375
1 .875
.305
.091
.375
1 .875
.356
.120
.563
2 .750
.430
1/4
.094
5/16
.094
3/8
.156
Bow-91
5/16
.109
3/8
.125
Bow-91-8
7/16
.125
1/2
.141
Bow-120
7/16
.141
1/2
.156
Bow-120-10
5/8
.156
.120
.562
2 .750
.490
Bow-148-10
5/8
.203
.148
.687
3 .578
.540
Bow-120-12
3/4
.156
.120
.562
2 .750
.545
Bow-148-12
3/4
.203
.148
.687
3 .578
.600
Bow-177-16
1
.218
.177
.875
4 .578
.762
Unless otherwise noted, all dimensions are for reference only.
BOW-TIE DEMO
1.
To install, push or pull Bow-Tie into hole .
2.
Bow-Tie snaps into a zero-tension locked position!
3.
You can even flip the BowTie over the end…it stays locked!
4.
Pull locking loop up and over to release .
28 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
Stock Bow-Tie Locking Cotters™
Bow-54 Fits 3/16” - 1/4” Shafts*
Bow-72 Fits 1/4” - 3/8” Shafts*
Bow-120 Fits 7/16” - 1/2” Shafts*
Shown at approximate actual size .
Bow-91 Fits 5/16” - 3/8” Shafts*
Bow-91-8 Fits 7/16 - 1/2” Shafts*
Bow-120-12 Fits 3/4” Shafts*
Bow-120-10 Fits 5/8” Shafts*
Bow-148-10 Fits 5/8” Shafts*
Bow-148-12 Fits 3/4” Shafts*
* See recommended hole sizes on page 28 .
Bow-177-16 Fits 1” Shafts* 29
PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
Rue Ring™ Locking Cotters Our Original Proven Design!
Revolutionary Rue Ring™ Locking Cotters surround the shaft and lock on, making them one of the safest cotters available. Best used on light to medium applications. Rue Ring™ Locking Cotters install fast without tools. Don’t be fooled by imitations! Our original proven design and dimensions ensure proper fit and function.
PRECISION MADE in the
U.S.A.
NEW
A manual secondary lock tensions the Rue Ring™ tight and dampens vibration. Made of hard drawn MB spring wire, zinc plated or stainless type 302. Easy to install - easy to remove.
A
B
Lift Loop Style
Our Original Design
A
B
C
R U E R I N G S ™ - Zinc Plated
C
Standard Style
STOCK CODE
Size
Wire Diameter
Approximate Weight/Pounds per 100 Pieces
RUE-8 RUE-9H RUE-10 RUE-14 RUE-19 RUE-22 RUE-24 RUE-24LL RUE-30 RUE-34 RUE-36 RUE-40 RUE-42
1/4 1/4 Heavy 5/16 3/8 7/16” Heavy 1/2 1/2 Heavy 1/2 - Lift Loop 5/8 3/4 3/4 Heavy 7/8 Heavy 1
.041 .054 .047 .054 .072 .062 .072 .072 .072 .080 .091 .105 .105
.11 .18 .18 .23 .55 .41 .68 .71 .79 1 .00 1 .30 2 .06 2 .28
R U E R I N G S ™ - Stainless Steel STOCK CODE
Size
Wire Diameter
RUE-8-S RUE-10-S RUE-14-S RUE-24-S RUE-30-S RUE-36-S
1/4 5/16 3/8 1/2 Heavy 5/8 3/4 Heavy
.041 .047 .054 .072 .072 .091
Approximate Weight/Pounds per 100 Pieces
.11 .18 .23 .68 .79 1 .30
Lift Loop Style
RUE RING™ LOCKING COTTER PIN SPECS Dimensions Stock Code
Fits Shaft Sizes
A
B
C
RUE-8
1/4
.267/ .257
.041
.844
RUE-9H
1/4 Heavy
.270/ .260
.054
.936
RUE-10
5/16
.330/ .320
.047
1 .044
RUE-14
3/8
.392/ .382
.054
1 .214
RUE-19
7/16 Heavy
.447/ .457
.072
1 .411
RUE-22
1/2
.520/ .510
.062
1 .420
RUE-24
1/2 Heavy
.520/ .510
.072
1 .456
1/2 - Lift Loop
.520/ .510
.072
1 .456
RUE-30
5/8
.645/ .635
.072
1 .690
RUE-34
3/4
.770/ .760
.080
2 .081
RUE-36
3/4 Heavy
.770/ .760
.091
2 .166
RUE-40
7/8 Heavy
.895/ .885
.105
2 .506
RUE-42
1
1 .020/1 .010
.105
2 .756
RUE-24LL
Unless otherwise noted, all dimensions are for reference only.
RUE RING™ DEMO
1. Install into hole .
2. Automatic Lock
3. Optional Manual Lock
30 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
4. Push up and back to remove .
WIRE FORMING SOLUTIONS
Hole Placement
Total Width Equals 3 Wire Diameters
End Shaft Use Only
Manual Lock Adds One Wire Diameter to Back
Rue Ring™ Locking Cotters will retro fit most standard applications without design changes. Total width of any Rue Ring™equals 3 of its wire diameters. The straight wire shaft which goes through the pin hole is one, plus two additional wire loops, one on each side, front and back as illustrated.
Back Wire Loop Front Wire Loop
Recommended hole size is 2 times the wire diameter of the selected Rue Ring™. This leaves the Rue Ring™ short of interfering with the shaft effective length.
Straight Wire Shaft
Recommended web thickness is a minimum of 1 wire diameter and a maximum of 2 wire diameters. A thicker web results in more holding power, but makes installation and removal more difficult.
Effective Length
Web
Stock Rue Ring™ Locking Cotters
RUE-8 1/4”
RUE-10 5/16”
RUE-14 3/8”
RUE-34 3/4”
Hole Diameter
Shown at approximate actual size .
RUE-19 7/16”
RUE-40 7/8”
RUE-22 1/2”
RUE-30 5/8”
RUE-42 1”
31 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
Hair Pin Cotters re re secu out For mo k e h g, c c fastenin ie Locking 9 w-T es 28-2 our Bo on pag king ™ s r e Cott ™ Loc . e-Ring 1 and Ru es 30-3 on pag s r e t t Co
PRECISION MADE in the
U.S.A.
A spring-type cotter made to be reusable. Pivot Point hair pin cotters are made exclusively to our exact specifications. Designed to be strong and secure, these fasteners are economical and widely used. It is important to select the correct size because misuse causes fatigue and will result in loss of the fastener. Consult our use chart below and ask us about proper hole size . . . we’re glad to help!
ALSO STOCKED IN STAINLESS
Made from hard drawn MB spring wire, zinc plated or stainless type 302.
HAIR PIN COTTER PIN SPECS
Stock Hair Pin Cotters
Stock Code
Shown at approximate actual size .
HAIR-1
HAIR-2
HAIR-4
PIVOT POINT STANDARD Wire Diameter Overall Length
CROSS REFERENCE/REPLACES WW Number Wire Diameter Overall Length
HAIR-1
.047
.594
221
.047
.594
HAIR-2
.054
.969
223
.042
1 .000
HAIR-4
.072
1 .188
213
.080
1 .188
HAIR-5
.091
1 .625
203
.094
1 .625
HAIR-6
.091
2 .000
228
.094
2 .000
HAIR-8
.120
2 .375
211
.125
2 .563
HAIR-10
.148
2 .750
210
.148
2 .938
HAIR-12
.177
3 .500
229
.177
3 .500
Unless otherwise noted, all dimensions are for reference only.
HAIR-5
H A I R P I N C O T T E R S - Zinc Plated
HAIR-6
HAIR-8
STOCK CODE
Wire Diameter
Use on Shaft Size
Approximate Weight/Pounds per 100 Pieces
HAIR-1 HAIR-2 HAIR-4 HAIR-5 HAIR-6 HAIR-8 HAIR-10 HAIR-12
.047 .054 .072 .091 .091 .120 .148 .177
1/8 - 3/16 3/16 - 1/4 1/4 - 3/8 5/16 - 3/8 3/8 - 1/2 1/2 - 9/16 5/8 - 3/4 7/8 - 1
.06 .14 .30 .66 .88 1 .68 3 .04 5 .58
H A I R P I N C O T T E R S - Stainless Steel STOCK CODE
HAIR-10
HAIR-1-S HAIR-2-S HAIR-4-S HAIR-5-S HAIR-6-S HAIR-8-S
Wire Diameter
Use on Shaft Size
Approximate Weight/Pounds per 100 Pieces
.047 .054 .072 .091 .091 .120
1/8 - 3/16 3/16 - 1/4 1/4 - 3/8 5/16 - 3/8 3/8 - 1/2 1/2 - 9/16
.06 .14 .30 .66 .88 1 .68
HAIR-12 32 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
Double Loop Hair Pin Cotters IMPORTED
A double loop adds flexibility for a wider fit range. Stresses are evenly spread throughout the loop giving longer life and more repeatability. Made from hard drawn MB spring wire, zinc plated. High quality.
DOUBLE LOOP HAIR PIN COTTERS STOCK CODE
HAIR-7DB HAIR-9DB
Available in other sizes - call for pricing .
Use on Shaft Size
Wire Diameter
Overall Length
Approximate Weight/Pounds per 100 Pieces
5/8 - 3/4 7/8 - 1
3 mm ( .118) 4 mm ( .158)
3 .00 3 .70
2 .60 6 .40
Unless otherwise noted, all dimensions are for reference only.
EASY
Infinity S-Hooks™
Semi-Locking Design
The Infinity S-Hook’s™ innovative design allows you to connect components quickly and securely without tools! This time and labor saving fastener snaps on and off without bending or pinching ends. Made from hard drawn MB spring wire with an attractive zinc finish. Use the Infinity S-Hook™ to connect chain, cable assemblies, lanyards, pins and more. The possibilities are infinite!
PRECISION MADE in the
U.S.A.
INFINITY S-HOOKS™
ECTOR CONN K IC U Q OFF ON & EASY EED ED N OLS NO TO E E SECUR TORAG FREE S E L G TAN BLE REUSA B
STOCK CODE
A
B
C
Approximate Weight/Pounds per 100 Pieces
FINS-120
.12
2 .60
0 .66
2 .23
INFINITY S-HOOK™ DEMO
A
C 1. Attach chain or other component .
2. Snap into place! Stays secure .
3. Snap out to remove .
33 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
WIRE FORMING SOLUTIONS
S-Hooks Pivot Point ductile S-Hooks are an easy-to-use versatile fastener. Made from low-carbon steel wire, zinc plated. Available in stock sizes as shown full scale.
PRECISION MADE in the
U.S.A.
S - H O O K S - Zinc Plated
Stock S-Hooks Shown at approximate actual size .
STOCK CODE
Overall Length x Wire Diameter
Approximate Weight/Pounds per 100 Pieces
S-6 S-8 S-10H S-12 S-14 S-16H S-18 S-20
3/4 x 0 .80 7/8 x .091 1 x .105 1-1/8 x .105 1-1/4 x .120 1-1/2 x .177 1-5/8 x .135 2-1/8 x .148
0 .26 0 .41 0 .60 0 .68 1 .03 2 .50 1 .63 2 .78
Unless otherwise noted, all dimensions are for reference only.
S-6
S-12
S-8
S-10H
S-14
S-16H
S-18
DON’T MISS OUR EXCLUSIVE DESIGN, The Infinity S-Hook™ on page 33.
34 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
S-20
WIRE FORMING SOLUTIONS
Circle Cotters PRECISION MADE in the
U.S.A.
This cotter is wound or turned on from the middle out. Start by threading the open wire end inside the circle into the hole on shaft or pin. Keep turning the ring until it snaps into place. To remove, start turning the circle again in the same direction and it comes right off.
ALSO STOCKED IN STAINLESS
r reat fo s are g r e tions. t a t c o li C s app a Circle v n a and c fabric
Very secure fasteners, circle cotters are used where sharp ends are not allowed. Smooth all around, this fastener is ideal for applications associated with fabric. Made from hard drawn MB spring wire, zinc plated or stainless type 302.
C I R C L E C O T T E R S - Zinc Plated STOCK CODE
Dimensions O.D. x Wire Diameter
Use on Diamter
CC-3 CC-5 CC-7 CC-9
5/8 x .048 3/4 x .048 1 x .060 1-1/8 x .072
3/16 - 1/4 1/4 - 5/16 3/8 - 7/16 7/16 - 1/2
C I R C L E C O T T E R S - Stainless Steel Approximate Weight/Pounds per 100 Pieces
STOCK CODE
Dimensions O.D. x Wire Diameter
Use on Diamter
CC-3-S CC-5-S CC-7-S CC-9-S
5/8 x .048 3/4 x .048 1 x .060 1-1/8 x .072
3/16 - 1/4 1/4 - 5/16 3/8 - 7/16 7/16 - 1/2
.14 .16 .40 .62
Unless otherwise noted, all dimensions are for reference only.
.14 .16 .40 .62
Unless otherwise noted, all dimensions are for reference only.
Stock Circle Cotters
CC-3
Approximate Weight/Pounds per 100 Pieces
Shown at approximate actual size .
CC-5
CC-7
CC-9
Kickout Rings PRECISION MADE in the
U.S.A.
Mid Ring Diameter
ALSO STOCKED IN STAINLESS
Kickout Rings are a type of circle cotter with a “kick-out” design that is made for speed and economy. Easily removable, this cotter can be installed fast by inserting the “kickout” end into hole on pin or shaft and winding it through until it snaps into place. To remove, just start winding again. This is a very secure cotter. Wound 1-3/4 coil, Kickout Cotter Rings are available in two sizes made from hard drawn MB spring wire, zinc plated or stainless type 302.
K I C K O U T R I N G S - Zinc Plated STOCK CODE
K I C K O U T R I N G S - Stainless Steel
Size Ring Dia. x Wire Dia.
Approximate Weight/Pounds per 100 Pieces
1 x .072 1-1/4 x .080
.65 .97
KIC-172 KIC-12580
Unless otherwise noted, all dimensions are for reference only.
STOCK CODE
KIC-172-S KIC-12580-S
Size Ring Dia. x Wire Dia.
Approximate Weight/Pounds per 100 Pieces
1 x .072 1-1/4 x .080
.65 .97
Unless otherwise noted, all dimensions are for reference only.
35 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
ADDITIONAL FASTENING SOLUTIONS
Split Key Rings PRECISION MADE in the
Pivot Point Split Key Rings are high quality, nickel plated steel designed to lay flat. Wire is half-circle shape and wound with the flat surfaces together. Construction is a full two turns with a “dog leg” jog where the ends meet. This design offers a smooth appearance and prevents the ends from “catching”. Used as key rings, cotters, and attachments for lanyards; these rings are strong and attractive.
B
U.S.A.
Enlarged Cross Section and Side View Detail
A
S P L I T R I N G S - Nickel Plated STOCK CODE
Approx. Fractional Size
RING-1M* RING-1 RING-3 RING-5 RING-7 RING-8M* RING-9 RING-11 RING-12M* RING-13 RING-14M* RING-15 RING-16M* RING-17 RING-17M* RING-17L** RING-18M* RING-19 RING-20M* RING-21 RING-23 RING-25 RING-27 RING-29
Approx. Metric* Size
Approx. O.D.
Approx. I.D.
A
B
9mm
0 .354 0 .430 0 .484 0 .542 0 .604 0 .615 0 .670 0 .740 0 .787 0 .875 0 .960 0 .970 1 .030 1 .100 1 .100 1 .100 1 .130 1 .250 1 .320 1 .375 1 .480 1 .640 1 .865 2 .240
0 .302 0 .328 0 .382 0 .428 0 .460 0 .505 0 .526 0 .596 0 .678 0 .707 0 .815 0 .802 0 .890 0 .932 0 .960 0 .956 0 .970 1 .062 1 .135 1 .159 1 .264 1 .396 1 .635 2 .016
0 .034 0 .051 0 .051 0 .057 0 .072 0 .053 0 .072 0 .072 0 .055 0 .084 0 .070 0 .084 0 .070 0 .084 0 .073 0 .072 0 .073 0 .094 0 .090 0 .108 0 .108 0 .122 0 .115 0 .112
0 .053 0 .074 0 .074 0 .083 0 .105 0 .105 0 .105 0 .112 0 .075 0 .120 0 .098 0 .120 0 .102 0 .120 0 .117 0 .120 0 .117 0 .138 0 .130 0 .163 0 .163 0 .185 0 .185 0 .180
3/8 13/32 7/16 1/2 16mm 9/16 5/8 20mm 3/4 24mm 7/8 26mm 1 28mm 1 29mm 1 1/8 34mm 1 1/4 1 3/8 1 1/2 1 3/4 2
Approximate Weight/Pounds per 100 Pieces
0 .11 0 .11 0 .12 0 .18 0 .30 0 .15 0 .34 0 .38 0 .22 0 .58 0 .40 0 .63 0 .48 0 .73 0 .60 0 .58 0 .75 1 .08 1 .10 1 .48 1 .60 2 .30 2 .65 3 .20
Unless otherwise noted, all dimensions are for reference only. * Metric rings are imported. ** Zinc plated finish.
Basic Rings PRECISION MADE in the
These basic rings are a low cost alternative to Split Key Rings and are often used as ring-grips in various applications, including pins such as Detent Ring Pins. Available in either hard drawn MB Spring wire with an attractive zinc plated finish or corrosion resistant stainless steel.
U.S.A.
B A S I C R I N G S - Zinc Plated STOCK CODE
Size Ring Dia. x Wire Dia.
DR-8762B DR-172B DR-12580B
7/8 x .062 1 x .072 1-1/4 x .080
B A S I C R I N G S - Stainless Steel Approximate Weight/Pounds per 100 Pieces
.0425 .0667 .0915
Unless otherwise noted, all dimensions are for reference only.
STOCK CODE
DR-8762B-S DR-172B-S DR-12580B-S
Size Ring Dia. x Wire Dia.
7/8 x .062 1 x .072 1-1/4 x .080
Unless otherwise noted, all dimensions are for reference only.
36 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
Approximate Weight/Pounds per 100 Pieces
.0425 .0667 .0915
ADDITIONAL FASTENING SOLUTIONS
Crimp Ring Retainers Here’s a strong and easy to use alternative to retaining rings. Applied in a groove on shaft or pin, crimp ring retainers are squeezed into place with a pliers. Remove by squeezing the top ears to reopen the ring. Heavy construction in mild steel offers strong retention. No sharp edges and minimum clearances are additional benefits. PRECISION MADE in the
U.S.A.
Stainle
ss Ava
ilable!
Stock Crimp Ring Retainers Shown at approximate actual size .
H Open
J
Closed
A D
F
E
CRR-5 A C
CRR-6
CRR-8
CRR-10
CRR-12
G
CRIMP RING RETAINER DEMO
CRR-16
CRR-14 1. Applying
2. Clamping
CRR-18
3. 360° Enclosure
4. Removing
5. Removed
CRR-20
CRR-22
CRR-24
C R I M P R I N G R E TA I N E R S - Zinc Plated Approximate Dimensions STOCK CODE
CRR-5 CRR-6 CRR-8 CRR-10 CRR-12 CRR-14 CRR-16 CRR-18 CRR-20 CRR-22 CRR-24
A
Thickness
.086 .098 .130 .164 .190 .222 .256 .285 .317 .347 .381
.025 .055 .055 .065 .065 .075 .075 .075 .089 .089 .089
C
.320 .364 .430 .523 .593 .622 .698 .822 .872 .948 1 .060
D
.406 .490 .575 .687 .745 .776 .905 .986 1 .100 1 .190 1 .297
Recommended E
.210 .297 .359 .422 .437 .469 .500 .563 .609 .688 .797
F
.406 .475 .556 .665 .730 .775 .890 .984 1 .078 1 .188 1 .281
Shaft Size G
5/32 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4
Groove Seat Dia. Groove Width H J
.086 .093 .125 .156 .187 .218 .250 .279 .311 .341 .375
.031 .062 .062 .075 .075 .083 .083 .083 .097 .097 .097
Approximate Weight/Pounds per 100 Pieces
.06 .15 .18 .36 .41 .48 .61 .74 .99 1 .26 1 .51
+.000/-.005 +.005/-.000 Recommended Tolerances
Unless otherwise noted, all dimensions are for reference only.
37 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
ADDITIONAL FASTENING SOLUTIONS
Cable Ties Pivot Point Cable Ties feature an advanced locking mechanism which offers low insertion with high pull-out force. The stepped design locks against the strap’s serrations for superior locking power.
PRECISION MADE in the
U.S.A.
The strap has finely molded serrations for total adjustability within a fastening range. The elimination of ejector pin marks along the length of the strap promotes smooth pull-thru. Also, the strap has rounded edges on the outer rails to enhance low drag coefficient and minimum surface abrasion. The tail (inset) is a tapered, bent tip with ribbed finger grips. These features encourage non-slip insertion and fast assembly. The head has been designed with a low profile for an attractive appearance. This also reduces snagging in tight spaces. With gusset-style reinforcement, the neck is strengthened where the head joins the strap. B
Made of 100% 6/6 nylon in natural or UV black.
CABLE TIE SPECS Stock Code
Nominal Length (in .)
Tensile Strength (lbs .)
Max . Capture Diameter
Width B
4-18
4
18
13/16”
.09
6-18
5
18
1-1/4”
.10
8-18
8
18
2”
.10
6-30
5
40
1-1/4”
.14
8-30
8
40
2-3/16”
.14
8-75
7
50
1-13/16”
.19
11-75
11
50
2-15/16”
.19
14-75
14
50
4”
.19
8-120
8
120
2”
.30
15-120
14
120
4”
.30
12-175
11
120
2-15/16”
.30
18-175
18
175
4-11/16”
.35
24-175
24
175
7”
.35
*NOTE: Dimensions of the above cable ties may vary slightly depending upon the environment in which they are stored. In an environment with a high relative humidity (RH), nylon ties will absorb moisture and the dimensions will slightly increase. Conversely, if the ties are kept in an environment with low RH, the dimensions will slightly decrease. Molding conditions and post-mold shrinkage could also affect the dimensions. Unless noted, all dimensions are for reference only.
38 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
ADDITIONAL FASTENING SOLUTIONS
*Packaged 50, 100 or 1000 piece bags . No broken bag quantities please .
C A B L E T I E S - Natural Color & UV Black STOCK CODE
4-18-N 4-18-UV 6-18-N 6-18-UV 8-18-N 8-18-UV 6-30-N 6-30-UV 8-30-N 8-30-UV 8-75-N 8-75-UV 11-75-N 11-75-UV 14-75-N 14-75-UV 8-120-N 8-120-UV 12-175-N 12-175-U 15-120-N 15-120-UV 18-175-N 18-175-UV 24-175-N 24-175-UV
Tie Length x Tensile Strength
Material Color
4” x 18 lb . 4” x 18 lb . 5” x 18 lb . 5” x 18 lb . 8” x 18 lb . 8” x 18 lb . 5” x 40 lb . 5” x 40 lb . 8” x 40 lb . 8” x 40 lb . 7” x 50 lb . 7” x 50 lb . 11” x 50 lb . 11” x 50 lb . 14” x 50 lb . 14” x 50 lb . 8” x 120 lb . 8” x 120 lb . 11” x 120 lb . 11” x 120 lb . 14” x 120 lb . 14” x 120 lb . 18” x 175 lb . 18” x 175 lb . 24” x 175 lb . 24” x 175 lb .
Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV Black Natural UV BlackNatural UV Black Natural UV Black Natural UV Black
Maximum Capture Diameter
Approximate Weight/Pounds per 100 Pieces
13/16” 13/16” 1-1/4” 1-1/4” 2” 2” 1-1/4” 1-1/4” 2-3/16” 2-3/16” 1-3/16” 1-3/16” 2-15/16” 2-15/16” 4” 4” 2” 2” 2-15/16” 2-15/16” 4” 4” 4-11/16” 4-11/16” 7” 7”
0 .068
(inches)
Cross Reference Guide Catamount P/N
Tyton P/N
Dennison P/N
Richco P/N
T&B P/N
Panduit P/N
L-4-18-9-C
T18R-C
8434
WIT-18R
TY523M
PLT1M-C
L-4-18-0-C
T18R-0-C
8435
WIT-18RUVB
TY523MX
PLT1M-CO
T18I-C
WIT-18L
TY52315M
PLT1.5M-C
T18I-0-C
WIT-18LUVB
TY52315MX
PLT1.5M-CO
0 .09 0 .122 0 .144 0 .178
L-8-18-9-C
T18L-C
10328
WIT-18V
TY5232M
PLT2M-C
L-8-18-0-C
T18L-0-C
10330
WIT-18VUVB
TY5232MX
PLT2M-CO
L-5-30-9-C
T30R-C
8383
WIT-30R
TY524M
PLT1.5I-C
L-5-30-0-C
T30R-0-C
8384
WIT-30RUVB
TY524MX
PLT1.5I-CO
L-8-40-9-C
T30M-C
8385
WIT-30XL
TY5242M
PLT2I-C
L-8-40-0-C
T30M-0-C
8386
WIT-30XLUVB
TY5242MX
PLT2I-CO
0 .28
T50R-C
WIT-50R
T50R-0-C
0 .385 0 .488
WIT-50RUVB
L-11-50-9-C
T50I-C
8859
WIT-6 0R
TY5253M
PLT3S-C
L-11-50-0-C
T50I-0-C
8930
WIT-6 0RUVB
TY5253MX
PLT3S-CO
L-14-50-9-C
T50L-C
8427
WIT-50L
TY528M
PLT4S-C
L-14-50-0-C
T50L-0-C
8428
WIT-50LUVB
TY528MX
PLT4S-CO
0 .64 1 .028 1 .204 1 .556 1 .9
T120I
PLT3H-L
T120I-0
PLT3H-LO
L-14-120-9-C
T150R
10038
WIT-175S
TY527M
PLT4H-L
L-14-120-0-C
T150R-0
10039
WIT-175SUVB
TY527MX
PLT4H-LO
L-18-120-9-L
TY5275M
PLT5H-L
L-18-120-0-L
TY5275MX
PLT5H-LO
L-24-175-9-L
106 12
WIT-175R
TY5277M
PLT7LH-L
L-24-175-0-L
106 14
WIT-175RUVB
TY5277MX
PLT7LH-LO
* Example Stock Codes: 4-18-NC = 100 piece bags 4-18-NM = 1000 piece bags 18-175-NL = 50 piece bags
Extra Strength Gusset
GNIZED UL RECO
E125869 File No. . the U.S.A Made in 2) ...U194(V ylon 6/6 100% N
39 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
CUSTOM ENGINEERED FASTENING SOLUTIONS
Custom Engineered Fastening Solutions Can’t find the exact fastener solution for your application? Contact us! We specialize in Personalized Engineered Solutions! We’ll work with you to develop the ideal fastener solution to suit your specific application; and we’ll also provide preliminary prints and samples. Have a design in mind? Fax or email your sketch for a quote- we can often recommend cost saving alternatives. We offer a diverse range of production capabilities, including screw machining, cold heading, drilling, ball detenting, machining, assembly and more. We love a challenge, so let us help you develop the perfect solution!
SHOWN IS A VERY BRIEF REPRESENTATION OF OUR CUSTOM CAPABILITIES.
Aluminum Pull Pin
Dual-Ball Detent Pin
Pin and Lanyard Assembly
SLIC Pin™ with Special Head Geometry
SLIC Pin™ with Tapped Head
SLIC Pin™ with Threaded Stud End
Stainless Machined Part
T-Handle Locking Pull Pin
Triple Ball Detent Pin
Pull Pin with Knurled Knob
SLIC Pin™ with Barrel End
Multiple B all Detent Ring Pin
40 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
CUSTOM ENGINEERED FASTENING SOLUTIONS
WHAT CAN WE MAKE FOR YOU?
Detent Pin with Cross Hole
Special Locking Pin
Retractable Locking Pull Pin
Key-Locking Detent Pin
Bent Arm Pin with Ball Detent
Special Headless Pin with Multiple Grooves
Positive Lock Pin with Special Geometry
Grooved Stainless Steel Shoulder Pin
Short Grooved Pin
Small Pull Pin with Split Key Ring
Special Machined Part
Brass SLIC Pin™ with Grooves
Special Spring Plunger
Various Steel Lanyards
Various Steel Lanyards
41 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
GENERAL INFORMATION
Mechanical Properties of Steel - Condition, Strength, Hardness, Machinability S TA I N L E S S S T E E L S AISI Type 302 HQ Type 303 Type 304 Type 316 Type 410 Type 416 Type 17-4
Materials Condition
Tensile Strength ksi
Yield Strength ksi
Brinell
Annealed Bars Annealed Bars Annealed Bars Annealed Bars Annealed Bars Annealed Bars Bars Cond . A Cond . H 900 Cond . H 1025
75 - 95 85 - 95 80 - 90 75 - 90 70 - 100 80 - 100 150 200 170
35 - 55 30 - 40 30 - 40 30 - 40 35 - 45 55 - 65 110 185 165
150 - 180 160 - 180 150 - 180 150 - 180 150 - 200 190 - 220 320 415 352
Hardness Rockwell
Machinability % of CD1212
80 - 90B 83 - 95B 80 - 90B 80 - 90B 80 - 90B 90 - 95B 35C 44C 38C
60 73 45 40 55 90 45
1006 1008 1010 1018 1022 1038 1045
1212 12L14 1215 1117 1141 1144
Type of Processing
Estimated Minimum Values Tensile Strength psi Yield Strength psi
Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn ACD* Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn Hot rolled Cold drawn
43,000 48,000 44,000 49,000 47,000 53,000 58,000 64,000 62,000 69,000 75,000 83,000 82,000 91,000 85,000 56,000 78,000 57,000 78,000 57,000 75,000 62,000 69,000 94,000 105,100 97,000 108,000
Brinell Hardness
24,000 41,000 24,500 41,500 26,000 44,000 32,000 54,000 34,000 58,000 41,000 70,000 45,000 77,000 73,000 33,500 60,000 34,000 60,000 34,000 65,000 34,000 58,000 51,500 88,000 53,000 90,000
86 95 86 95 95 105 116 126 121 137 149 163 163 179 170 121 167 121 163 121 163 121 137 187 212 197 217
Average Machinability Rating (Cold Drawn 1212-100%) 50 55 55 70 70 65 55 65 100 160 135 90 70 80
* ACD: annealed, cold drawn All SAE 1100 series steels are rated on the basis for 0.10 max silicon or coarse grain melting practice. The mechanical properties shown are expected minimums for the sizes ranging from 3/4” to 1-1/4”. REF: SAE J1397 Rev. May 1992
ALLOY STEELS SAE No. 4037 8620 8630 4130 4140
Machinability Rating 70 65 70 70 65
Condition Annealed & Cold Drawn Hot Rolled & Cold Drawn Annealed & Cold Drawn Annealed & Cold Drawn Annealed & Cold Drawn
Non-magnetic Non-magnetic Non-magnetic Non-magnetic Magnetic Magnetic Magnetic
Non-magnetic to slightly magnetic Magnetic Slightly magnetic Non-magnetic to slightly magnetic Magnetic Magnetic Magnetic
A P P R O X I M AT E H A R D N E S S CONVERSIONS FOR STEEL
C A R B O N S T E E L S - Rephosphorized & Resulphurized Grade
Permeability Annealed Drawn
Range of Typical Hardness (Brinell) 174-217 179-235 179-229 187-229 187-229
Tensile Strength (Approx.) ksi 56 60 65 71 76 81 85 90 95 100 105 110 114 117 120 122 125 128 132 135 138 142 145 149 153 157 162 168 171 176 181 188 194 201 208 215 222
Rockwell Hardness No. B Scale C Scale 65 .7 69 .8 74 .0 78 .7 82 .9 86 .0 87 .8 90 .7 92 .8 94 .6 96 .4 97 .8 99 .0 100 .0 – – – – – – – – – – – – – – – – – – – – – – –
Brinell Hardness No.
– – – – – – – – – – – 20 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
The technical material presented in this appendix is for general reference only . Every attempt has been made to ensure the accuracy thereof; however, Pivot Point does not warrant in any way the accuracy or completeness of the information presented . It is the sole responsibility of the user to determine material and design suitability for their specific application .
42 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
111 121 131 143 156 167 174 187 197 207 217 226 237 243 247 253 258 264 271 279 286 294 301 311 319 327 336 344 353 362 371 381 390 400 409 421 432
GENERAL INFORMATION
Chemical Composition - Steels, Alloys and Stainless - Ranges and Limits (Percent) Grade
C
Mn
P Max.
S Max.
0 .04 0 .04 0 .04 0 .04 0 .04 0 .04 0 .04
0 .05 0 .05 0 .05 0 .05 0 .05 0 .05 0 .05
Si Max.
Ni
Cr
Mo Max.
Other Elements
S TA N D A R D C A R B O N S T E E L S 1006 1008 1010 1018 1022 1038 1045
.08 max . .10 max . .08 - .13 .15 - .20 .18 - .23 .35 - .42 .43 - .50
.25 - .40 .30 - .50 .30 - .60 .60 - .90 .70 - 1 .00 .60 - .90 .60 - .90
REPHOSPHORIZED & RESULPHURUIZED CARBON STEELS 1117 1141 1144 12L14 1215
.14 - .20 .37 - .45 .40 - .48 .15 - max . .09 - max .
1 .00 - 1 .30 1 .35 - 1 .65 1 .35 - 1 .65 .85 - 1 .15 .75 - 1 .05
0 .04 0 .04 0 .04 .04 - .09 .04 - .09
.08 - .13 .08 - .13 .24 - .33 .26 - .35 .26 - .35
0 .035 0 .035 0 .035 0 .035 0 .035
0 .04 0 .04 0 .04 0 .04 0 .04
Pb ( .15 - .35)
S TA N D A R D A L L O Y S T E E L S 4037 8620 8630 4130 4340
.35 - .40 .18 - .23 .28 - .33 .28 - .33 .38 - .43
.70 - .90 .70 - .90 .70 - .90 .40 - .60 .75 - 1 .00
.20 - .35 .20 - .35 .20 - .35 .20 - .35 .20 - .35
.40 - .70 .40 - .70
.40 - .60 .40 - .60 .80 - 1 .10 .80 - 1 .10
.20 - .30 .15 - .25 .15 - .25 .15 - .25 .15 - .25
S TA I N L E S S S T E E L - Austenitic/Non-Magnetic (may be slightly magnetic) 302HQ 302 303 304 316
.10 max . .15 max . .15 max . .08 max . .08 max .
2 .00 max . 2 .00 max . 2 .00 max . 2 .00 max . 2 .00 max .
0 .045 0 .045 0 .200 0 .045 0 .045
0 .03 0 .03 .15 min . 0 .03 0 .03
1 .00 1 .00 1 .00 1 .00 1 .00
0 .03 0 .03
1 .00 1 .00
8 .00 - 10 .00 8 .00 - 10 .00 8 .00 - 10 .00 8 .00 - 10 .50 10 .00 - 14 .00
17 .00 - 19 .00 17 .00 - 19 .00 17 .00 - 19 .00 18 .00 - 20 .00 16 .00 - 18 .00
0 .60 2 .00 - 3 .00
S TA I N L E S S S T E E L - Martinsitic/Magnetic 410 420
0 .15 .15 min .
1 .00 1 .00
0 .04 0 .04
11 .50 - 13 .50 12 .00 - 14 .00
S TA I N L E S S S T E E L - Precipitation Hardening Alloy 17-4PH
0 .07
1 .00
0 .04
0 .03
1 .00
3 .00 - 5 .00
15 .50 - 17 .50
Co + Ta ( .15- .45)
Fastener Plating & Finishes Finish
Color
For Use On (material)
Corrosion Resistance
Zinc (electroplated)
White to blue grey
All Metals
Good
Most common used plating. Good rust-resisting qualities, appearance and low cost.
Cadmium (electroplated)
Bright or dull silver grey
All Metals
Excellent
Superior rust-resisting qualities used in marine and aviation applications. Relatively high cost and toxic to the environment
Chromate
Yellow, olive drab, black, blue/white
Zinc & Cadmium Plated Parts
Very Good
A secondary dipping process after plating increasing corrosion resistance, adding color or brilliance.
Black Oxide
Black
Ferrous Metals & Stainless Steel
Fair
A chemical discoloration which does not add to part thickness. Usually combined with an oil dip. Rust resistance comes from the oil only.
Phosphate & Oil
Charcoal grey or black
Steel
Good
Zinc or manganese phosphate used with a rust-inhibiting oil dip. Low cost.
Iridite
Olive drab, green, black, red, blue, bronze
All Metals
Good
Applied on top of zinc or cadmium plating as a die for color and additional corrosion protection.
Nickel
Silver
All Metals
Very Good
Hard stable finish, relatively expensive and sometimes hard to apply.
Chromium
Bright blue/white
All Metals
Very Good
Hard lustrous finish adds wear resistance and is very expensive.
Hot Dip Zinc (galvanizing)
Dull grey
All Metals
Very Good
Parts are dipped in pure zinc. Gives maximum corrosion protection. Adds a thick irregular coating. Size must be adjusted to allow for thickness of coat.
Passivating
Bright - etched
Stainless Steel
Excellent
Parts are dipped in nitric acid which removes iron particles and brightens the finish. Produces a passive corrosion-resistant finish.
Anodizing
Frosty - etched
Aluminum
Excellent
Acid dip produces a hard oxide surface. Can be color dipped after anodizing for preferred finish.
Characteristics
43 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
GENERAL INFORMATION
Glossary of Terms FASTENER STEELS Alloy Steels: Steels alloyed with molybdenum, nickel and chromium (AISI 4037, 4130, 8630) are best where high strength is required . These steels have good cold forming properties in the annealed condition and can be heat-treated for the best combination of strength, toughness and shock resistance . Aluminum Alloys: Good cold-forming characteristics . Many aluminums can be used (2024, 3003, 5056, 5554, 6061, and 7075), and where secondary machining is required (2011) . Aluminum is corrosion resistant and some can be heat-treated . Carbon Steels: Fine grain, fully-killed basic steel with no alloying agent . Low Carbon Steels: Range from .06- .22% carbon content (AISI 1008, 1018) and have good ductility for cold forming . Medium Carbon Steels: Have .30- .50% carbon content (AISI 1038, 1045) . Stronger and less ductile, these steels respond well to quench and temper . High Carbon Steels: .50% carbon and up (AISI 1066, 1095) . Difficult to cold form unless annealed . High strength, can be heat treated . Hard Drawn MB Spring Wire, ASTM A227: Carbon range .60- .70% . Used for general purpose low-cost springs . Commonly available in diameters .031 to .500 . Lower tensile strength than music wire . Leaded Steels: Lead added to steel improves machinability . Identified by an “L” (AISI 12L14) in the AISI/SAE designation . This is most commonly added to 1100 and 1200 series ‘screw machine’ steels . Leaded steels are not suitable for heat treatment or welding .
Music Wire, ASTM A228: Carbon range .80- .95% . High tensile strength can withstand repeated loading . Widely used in small diameter rounds .005 to .125 . Resulphurized and Rephosphorized Steels (AISI 1117 and 1215): Improved machinability over basic carbon steels . Used commonly for screw machine parts, they are more brittle, less ductile and stronger than equivalent carbon content basic steel . Sulphur acts as an internal lubricant and is the major alloying agent for “1100” series steels . Phosphorus makes the steel more brittle, reducing friction, heat and tool wear . “1200” series steels have both phosphorous and sulphur as alloys . Stainless Steels Austenitic Stainless Steels: (AISI 202, 302, 304, 316) Generally nonmagnetic and the best corrosion resistant due to their large content of nickel and chromium . Good cold-forming characteristics are subject to work hardening and are not heat treatable . Martensitic Stainless Steel: Straight chromium steel with little or no nickel (AISI 410, 420) . These steels are magnetic and can be heat treated . Higher strength than austenitic types, lower corrosion resistance and harder to cold form . Precipitation Hardening Stainless: (AISI 17-4 PH) Nickel chromium stainless with cobalt and tantalum . The alloying agents produce high strength and ductility, good machinability and weldability . Hardening is by aging the cold steel at 900° F for 4 hours followed by aircooling . Not used for cold forming but commonly used for high-strength, corrosion resistant screw machine parts .
AISI-SAE INDEX SYSTEM FOR CARBON AND ALLOY STEELS Series Designation Type of Steel 1XXX Carbon Steels 10XX Plain Carbon Free machining, resulphurized (screw stock) 11XX Free machining, resulphurized rephosphorized 12XX 13XX Manganese Steels 15XX High Manganese Carburizing Steels 2XXX Nickel Steels 23XX 3 .5% nickel 25XX 5 .0% nickel Nickel-Chromium Steels 3XXX 31XX 1 .25% Nickel, 0 .60 % Chromium 32XX 1 .75% Nickel, 1% Chromium 33XX 3 .5% Nickel, 1 .5% Chromium 30XXX Corrosion and Heat Resisting Steels Molybdenum Steels 4XXX Carbon-Molybdenum 40XX Chromium-Molybdenum 41XX Chromium-Nickel-Molybdenum 43XX 45XX and 48XX Nickel-Molybdenum
Type of Steel Series Designation Chromium Steels 5XXX Low Chromium 51XX Medium Chromium 52XXX 51XXX Corrosion and Heat Resisting 6XXX Chromium-Vanadium Steels 61XX Chromium 1 .0% 86XX and 87XX Nickel-Chromium-Molybdenum Manganese-Silicon 92XX Nickel-Chromium-Molybdenum 93XX Manganese-Nickel-Chromium-Molybdenum 94XX Nickel-Chromium-Molybdenum 97XX Nickel-Chromium-Molybdenum 98XX XXBXX Boron (0 .0005% Boron minimum) Alloying Elements in Steel Aluminum Carbon Chromium Cobalt Copper Manganese
Al C Cr Co Cu Mn
Molybdenum Nickel Phosphorus Silicon Tungsten Vanadium
Mo Ni P Si W V
Society of Automotive Engineers
SAE
Approximate Percent of Main Alloying Element 3% Nickel
2
3
Class of Steel (Main Alloying Element Nickel)
17 Carbon Content (Hundredths of One Percent) .17% Carbon
Chemistry of Cast Iron
Element
Steel
Carbon Phosphorus Sulphur Manganese Silicon
.05 - 1 .5% .04 max . .05 max . .30 - .90 .15 - .30
2 .2 - 3 .8% .10 - 1 .00 .09 - .12 .40 - 1 .00 .50 - 3 .00
MECHANICAL DEFINITIONS
H E AT T R E AT I N G D E F I N I T I O N S
Cold Working: Deformation of a metal at room temperature without fracture which changes its shape and produces higher tensile strength and machinability . Ductility: The ability of a metal to be deformed extensively under tension load without rupture or fracture . Ductility is expressed in terms of percent elongation and percent reduction of area (e .g . drawn into wire) . Machinability: The condition or property of a metal which allows it to be cut, turned, broached or formed by machine tools . Malleability: The ability of a metal to be deformed permanently under compression load without rapture or fracture (e .g . hammer or rolled into sheets) . Tensile Strength: The maximum load in tension (pulling apart or shearing) which a material can withstand before breaking or fracturing . Also known as the ultimate tensile strength (UTS) or maximum strength . Work Hardening: Hardening that takes place through grain alignment when a metal is bent, rolled or hammered at room temperature . Not all metals work harden . Yield Strength: The maximum load which a material exhibits a specific permanent deformation . Deformation to determine yield varies with material .
Annealing: Heating and slow cooling to remove stresses, make steel softer, refine the structure, or change its ductility . Carburizing: Adding carbon to the surface of iron-based alloys by heating the metal below its melting point in contact with carbon-rich solids, liquids or gasses . Case Hardening: Carburizing a metal surface followed by quenching to fix a hard outer case high in carbon combined with a relatively soft middle or core . Cyanide Hardening: A method of case hardening which brings the metal surface in contact with the molten cyanide salt followed by quenching . Decarburization: Removal of carbon from the surface of steel . This can occur through normal oxidizing action or as the result of heat treatment . Drawing (Tempering): Reheating after hardening, held at a specific temperature and then quenched . This reduces hardness and increases toughness . Hydrogen Embrittlement: A condition where the surface finishing of metal (plating) results in a brittle outer case due to immersion in acid . Baking immediately following the plating process removes this brittle surface condition . Nitriding: A hardening process which adds nitrogen to a metal surface through contact with ammonia gas . Produces surface hardness (case) without quenching . Precipitation Hardening: A hardening process where certain metals are held at elevated temperature without quenching (age hardening) . Quenching: Rapid cooling of steel by immersion in oil or water to fix its structure in a hardened state . Sphereoidizing (anneal): Any process of heating and cooling steel that produces a rounded or globular form of carbide . This softens the metal, improving ductility . Stress Relieve: A low temperature heat treatment, which removes stresses caused by cold working .
PROCESS DEFINITIONS Alloy Steel: A carbon steel to which one or more elements are added to add special properties for a specific use . Billet: A cast section of steel 4 to 6 inches square about 20 ft . long from which dimensional shapes of steel are rolled . Brass: An alloy of copper and zinc which can contain small amounts of aluminum, iron, manganese, or tin to produce specific properties . Bronze: An alloy of copper and tin or an alloy of aluminum and silicon . Carbon Steel: A steel in which carbon is the only alloying element added to iron . Killed Steels: Molten steel treated with aluminum, silicon, or manganese until no more gas is in the metal and it is in a quiet state . Pickling: The removal of oxide scale from metal by dipping it in a diluted acid bath . The chemically clean surface is then ready for cold rolling or wire drawing . Rockwell Hardness Test: A method of determining metal hardness by indenting with a metal ball or diamond cone under a specified load .
CLEVIS PIN DEFINITIONS Length: Refers to length under head to end of pin . Effective Length: Length under head to the edge of the hole closest to the head . Also known as grip length . Overall Length: Total length of the pin from the top of the head to the opposite end .
44 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
GENERAL INFORMATION
Credit Application
Salesperson:
Company Name:
Completed By:
Billing Address:
Federal Tax I .D . # Ownership:
Sole Owner
Partnership
Corporation
Line of Credit Requested: $ Phone:
Current Order Amount: $
Fax:
Years in Business:
Years at Current Address:
Estimated Annual Sales:
Number of Employees:
Product: (if Manufacturer)
Primary Business:
Manufacturer
Distributor
Principal: name
SSN
title
home address
Bank References:
city/state/zip
Checking
Loan
Savings
Bank Reference: name
account #
contact
address
city/state/zip
phone #
Has the firm or any of its Principals ever been bankrupt?
Yes
No
If yes, explain:
PLEASE FORWARD OR ATTACH A LIST OF COMMERCIAL CREDIT REFERENCES
Name and Phone Number of Accounts Payable Contact:
Credit Terms: Pivot Point Incorporated uses the terms of N/30 when extending credit to all of our customers . There are no exceptions . By signing below you agree to pay invoice within these terms . If a violation of these terms persists the applicant agrees to pay any collection costs incurred to collect the amount balance, including reasonable attorney’s fees . The undersigned as an inducement to grant credit warrants that the information submitted is true and correct . The undersigned authorizes Pivot Point Incorporated to investigate the Commercial Credit References provided .
your signature
title
date
your printed name
45 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
GENERAL INFORMATION
Terms and Conditions of Sale - Pivot Point, Inc . 1) GOVERNING PROVISIONS All sales by Pivot Point, Inc . (“Seller”) are made subject to the following terms and conditions of sale . Seller objects to any additional or different terms contained in any purchase order or other communication previously or hereafter provided by buyer to Seller . No such additional or different terms will be of any force or effect; and buyer’s placement of any order for goods to be provided by Seller constitutes buyer’s unconditional acceptance of the following terms as the entire agreement between buyer and Seller with respect to the purchase and sale of such goods . THE FOLLOWING TERMS AND CONDITIONS, AND ANY CONTRACT FOR THE SALE OF GOODS BY SELLER SHALL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE STATE OF WISCONSIN, WITHOUT REFERENCE TO PRINCIPLES OF CONFLICTS OF LAWS . 2) PRICES All prices and minimum order requirements are subject to change without notice; and the price of products on order but unshipped will be adjusted to the price in effect at the time of shipment . All products are bulk priced and bulk packaged unless otherwise specified . 3) F.O.B. All shipments are made FOB Hustisford, WI ., and freight is billed either Freight Collect, 3rd Party or Prepay and Add . 4) SHIPPING TOLERANCE Pivot Point reserves the right to over or under ship the order quantity of all non-stock items by 10% as a result of our production process unless otherwise directed at the time an order is placed . 5) CANCELLATION; RETURNS No order may be canceled or altered by the buyer except upon terms and conditions acceptable to Seller, as evidenced by Seller’s written consent . No products ordered may be returned without Seller’s written permission, and in compliance with the terms of any such permission . If a return for a stock item is accepted and return is not because of an error by the seller, a restocking fee will be applied 6) CLERICAL ERRORS Seller reserves the right to correct all clerical errors in any quotation, order acknowledgement or invoice . 7) DELIVERY AND DELAY; SHORTAGES All quoted delivery dates and/or periods are approximate . Delivery periods shall commence when buyer shall have provided complete specifications and/or applicable documents required to effect shipment . Title and risk of loss or damage in transit shall pass to buyer upon delivery of products to a carrier at Seller’s premises . Seller reserves the right to make delivery in installments; and all such installments, when separately invoiced, shall be paid for when due, without regard to subsequent deliveries . Delay in delivery of any installment shall not relieve buyer of its obligations to accept remaining deliveries . Seller shall not be liable for any damage as a result of any delay due to any cause beyond Seller’s reasonable control, including but not limited to any act of God, act of buyer, embargo or other governmental act, regulation or request, fire, accident, strike, slowdown, war, riot, shortage, delay in transportation, or delayed delivery by suppliers . In the event of any such delay, the time for delivery shall be extended for a period equal to the time lost by reason of the delay . Claims for shortages or other errors must be made in writing to Seller within five (5) days after receipt of shipment; and failure to give such notice shall constitute unqualified acceptance and a waiver of all such claims by buyer . 8) STORAGE If Buyer requests that shipment of products be delayed for a period of more than (15) days, Seller may store such products at the buyers risk in a warehouse or yard or upon Seller’s premises; and the buyer shall pay handling, transportation and storage charges at the prevailing commercial rates upon submission of invoices therefore .
10) TAXES Buyer shall bear the cost of all import duties, manufacturer’s tax, retailer’s occupation tax, use tax, sales tax, value added tax, excise tax, duty, or charge of any nature whatsoever imposed on or measured by the transaction between Seller and buyer in addition to the prices quoted or invoiced; and in the event Seller is required to pay any such tax, duty or charge, buyer shall immediately reimburse Seller the amount so paid . 11) WARRANTIES a) Products purchased from Seller may be manufactured by third parties, which may or may not provide a warranty to the purchasers of their products . Seller agrees, upon request by buyer, to assign to buyer any and all such warranties, without recourse . Seller warrants that all products manufactured by Seller and supplied hereunder will conform to the specifications and drawings submitted by buyer, and that such goods will be manufactured and inspected in accordance with the generally accepted practices of companies in the business of manufacturing industrial fasteners . Unless dimensions are limited by a specific tolerance, commercial tolerances will apply . Seller warrants that all products manufactured by it and supplied hereunder shall be free from defects in materials and workmanship for a period of 1 month from the date of shipment . If, within such period, any such product shall be proved to Seller’s satisfaction to be defective, such product shall be repaired or replaced at Seller’s option . Such repair or replacement shall be Seller’s sole obligation and Buyer’s exclusive remedy hereunder, and shall be conditioned upon Seller’s receiving written notice of any alleged defect within 10 days after its discovery and, at Seller’s option, return of such products to Seller, F .O .B . its factory . b) EXCEPT FOR THE WARRANTIES SET FORTH IN THIS PARAGRAPH 10, SELLER SHALL HAVE NO OTHER OBLIGATION OR LIABILITY TO BUYER, AND HEREBY DISCLAIMS, ANY EXPRESS OR IMPLIED WARRANTY OF ANY PRODUCTS, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. c) Any description of the product, whether in writing or made orally by Seller or Seller’s agent, are for the sole purpose of identifying the product and shall not be construed as an express warranty . Any suggestions by Seller or Seller’s agent regarding use, application or suitability of the product shall not be construed as an express warranty unless confirmed to be such in writing by Seller . 12) EXCLUSION OF CONSEQUENTIAL DAMAGES AND DISCLAIMER OF LIABILITY a) Except as otherwise agreed in writing, Seller’s liability with respect to the products sold hereunder shall be limited to the warranty provided in Section 10 hereof, and, with respect to other performance of this contract, shall be limited to that part of the contract price allocable to the product (or part thereof) that gives rise to the claim . b) SELLER SHALL NOT BE SUBJECT TO ANY DISCLAIMS: (1) ANY OTHER OBLIGATIONS OR LIABILITIES ARISING OUT OF BREACH OF CONTRACT, (2) ANY OBLIGATIONS WHATSOEVER ARISING FROM TORT CLAIMS (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR ARISING UNDER OTHER THEORIES OF LAW WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SELLER, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO, AND (3) ALL CONSEQUENTIAL, INCIDENTAL AND CONTINGENT DAMAGES WHATSOEVER. c) Without limiting the generality of the foregoing, Seller specifically disclaims any liability for penalties (including administrative penalties), special or punitive damages, damages for lost profits or revenues, cost of any product recall, loss of use of products or any associated equipment, cost of capital, facilities or services, downtime, shutdown or slowdown costs, or for any other types of economic loss .
9) PAYMENT Unless otherwise provided on the face of this form, payment is due within 30 days after the date of invoice . A finance charge of 1-1/2% PER MONTH will be computed and added to all past due accounts . Annual percentage rate is 18% but in no event higher than the maximum allowed by law .
46 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
GENERAL INFORMATION
Fraction, Wire and Gauge Decimal Equivalents Fraction 1 64 3 64 5 64 7 64 9 64 11 64 13 64 15 64 17 64 19 64 21 64 23 64 25 64 27 64 29 64 31 64
Decimal
1 32 1 16 3 32 1 8 5 32 3 16 7 32 1 4 9 32 5 16 11 32 3 8 13 32 7 16 15 32 1 2
.0156 .0312 .0469 .0625 .0781 .0938 .1094 .1250 .1406 .1562 .1719 .1875 .2031 .2188 .2344 .2500 .2656 .2812 .2969 .3125 .3281 .3438 .3594 .3750 .3906 .4062 .4219 .4375 .4531 .4688 .4844 .5000
M/M
Fraction
.3969
33 64
.7938 35 64
1 .1906
17 32
1 .5875 37 64
1 .9844 2 .3812
39 64
2 .7781
19 32
3 .1750 41 64
3 .5719 3 .9688
43 64
4 .3656
21 32
4 .7625 45 64
5 .1594 5 .5562
47 64
5 .9531
23 32
6 .3500 49 64
6 .7469 7 .1438
51 64
7 .5406
25 32
7 .9375 53 64
8 .3344 8 .7312
55 64
9 .1281
27 32
9 .5250 57 64
9 .9219 10 .3188
59 64
10 .7156
29 32
11 .1125 61 64
11 .5094 11 .9062
63 64
12 .3031
31 32
12 .7000
Decimal
.5156 .5312 .5469 9 .5625 16 .5781 .5938 .6094 5 .6250 8 .6406 .6562 .6719 11 .6875 16 .7031 .7188 .7344 3 .7500 4 .7656 .7812 .7969 13 .8125 16 .8281 .8438 .8594 7 .8750 8 .8906 .9062 .9219 15 .9375 16 .9531 .9688 .9844 1 1.0000
M/M
13 .0969 13 .4938 13 .8906 14 .2875 14 .6844 15 .0812 15 .4781 15 .8750 16 .2719 16 .6688 17 .0656 17 .4625 17 .8594 18 .2562 18 .6531 19 .0500 19 .4469 19 .8438 20 .2406 20 .6375 21 .0344 21 .4312 21 .8281 22 .2250
Wire
Dec.
M/M
Wire
Dec.
M/M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
.2280 .2210 .2130 .2090 .2055 .2040 .2010 .1990 .1960 .1935 .1910 .1890 .1850 .1820 .1800 .1770 .1730 .1695 .1660 .1610 .1590 .1570 .1540 .1520 .1495 .1470 .1440 .1405 .1360 .1285 .1200 .1160 .1130 .1110 .1100 .1065 .1040 .1015 .0995 .0980
5.791 5.613 5.410 5.309 5.220 5.182 5.105 5.055 4.978 4.915 4.851 4.801 4.699 4.623 4.572 4.496 4.394 4.305 4.216 4.089 4.039 3.989 3.912 3.861 3.797 3.734 3.658 3.569 3.454 3.264 3.048 2.946 2.870 2.819 2.794 2.705 2.642 2.578 2.527 2.489
41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
.0960 .0935 .0890 .0860 .0820 .0810 .0785 .0760 .0730 .0700 .0670 .0635 .0595 .0550 .0520 .0465 .0430 .0420 .0410 .0400 .0390 .0380 .0370 .0360 .0350 .0330 .0320 .0310 .0292 .0280 .0260 .0250 .0240 .0225 .0210 .0200 .0180 .0160 .0145 .0135
2.438 2.375 2.261 2.184 2.083 2.057 1.994 1.930 1.854 1.778 1.702 1.613 1.511 1.397 1.321 1.181 1.092 1.067 1.041 1.016 .991 .965 .940 .914 .889 .838 .813 .787 .742 .711 .660 .635 .610 .572 .533 .508 .457 .406 .368 .343
Letter Dec.
22 .6219
.234 .238 .242 .246 .250 .257 .261 .266 .272 .277 .281 .290 .295
A B C D E F G H I J K L M
23 .0188 23 .4156 23 .8125 24 .2094 24 .6062 25 .0031 25 .4000
M/M
M/M
Letter Dec.
5.944 6.045 6.147 6.248 6.350 6.528 6.629 6.756 6.909 7.036 7.137 7.366 7.493
N O P Q R S T U V W X Y Z
.302 .316 .323 .332 .339 .348 .358 .368 .377 .386 .397 .404 .413
7.671 8.026 8.204 8.433 8.611 8.839 9.093 9.347 9.576 9.804 10.084 10.262 10.490
Standard and Split Wire Gauge Decimal Equivalents –––
7/0
1/ 4 1/ 2
3/ 4 –––
6/0
1/ 4
1/ 2
3/ 4 –––
5/0
1/ 4
1/ 2
3/ 4 –––
4/0
1/ 4
1/ 2
3/ 4 –––
3/0
1/ 4
1/ 2
3/ 4 –––
2/0
1/ 4
1/ 2 3/ 4
.490 .483 .476 .469 .4615 .454 .446 .438 .4305 .421 .412 .403 .3938 .386 .378 .370 .3625 .355 .349 .339 .331 .325 .319 .313
–––
1/0
1/ 4 1/ 2
3/ 4 –––
1
1/ 4
1/ 2
3/ 4 –––
2
1/ 4
1/ 2
3/ 4 –––
3
1/ 4
1/ 2
3/ 4 –––
4
1/ 4
1/ 2
3/ 4 –––
5
1/ 4
1/ 2 3/ 4
.3065 .301 .295 .289 .283 .278 .273 .268 .2625 .258 .253 .248 .2437 .239 .235 .230 .2253 .221 .216 .212 .207 .203 .200 .196
–––
6
1/ 4 1/ 2
3/ 4 –––
7
1/ 4
1/ 2
3/ 4 –––
8
1/ 4
1/ 2
3/ 4 –––
9
1/ 4
1/ 2
3/ 4 –––
10
1/ 4
1/ 2
3/ 4 –––
11
1/ 4
1/ 2 3/ 4
.192 .188 .185 .181 .177 .173 .170 .166 .162 .159 .155 .152 .1483 .145 .142 .138 .135 .131 .128 .124 .1205 .117 .113 .109
–––
12
1/ 4 1/ 2
3/ 4 –––
13
1/ 4
1/ 2
3/ 4 –––
14
1/ 4
1/ 2
3/ 4 –––
15
1/ 4
1/ 2
3/ 4 –––
16
1/ 4
1/ 2
3/ 4 –––
17
1/ 4
1/ 2 3/ 4
.1055 .102 .099 .095 .0915 .089 .086 .083 .080 .078 .076 .074 .072 .070 .067 .065 .0625 .060 .058 .056 .054 .052 .051 .0491
–––
18
1/ 4 1/ 2
3/ 4 –––
19
1/ 4
1/ 2
3/ 4 –––
20
1/ 4
1/ 2
3/ 4 –––
21
1/ 4
1/ 2
3/ 4 –––
22
1/ 4
1/ 2
3/ 4 –––
23
1/ 4
1/ 2 3/ 4
.0475 .0459 .0443 .0426 .0410 .0394 .0379 .0363 .0348 .0340 .0332 .0325 .0317 .0309 .0301 .0294 .0286 .0279 .0272 .0265 .0258 .0251 .0244 .0237
–––
24
1/ 4 1/ 2
3/ 4 –––
25
1/ 4
1/ 2
3/ 4 –––
26
1/ 4
1/ 2
3/ 4 –––
27
1/ 4
1/ 2
3/ 4 –––
28
1/ 4
1/ 2
3/ 4 –––
29
1/ 4
1/ 2 3/ 4
.0230 .0224 .0217 .0211 .0204 .0198 .0193 .0187 .0181 .0179 .0177 .0175 .0173 .0170 .0168 .0165 .0162 .0159 .0156 .0153 .0150 .0148 .0145 .0143
–––
30
1/ 4
1/ 2
3/ 4 –––
31
1/ 4
1/ 2
3/ 4 –––
32
1/ 4
1/ 2
3/ 4 –––
33
1/ 4
1/ 2
3/ 4 –––
34
1/ 4
1/ 2
3/ 4 –––
35
1/ 4
1/ 2 3/ 4
.0140 .0138 .0136 .0134 .0132 .0131 .0130 .0129 .0128 .0126 .0123 .0121 .0118 .0115 .0111 .0108 .0104 .0102 .0100 .0097 .0095 .0094 .0093 .0091
–––
36
1/ 4 1/ 2
3/ 4 –––
37
1/ 4 1/ 2
3/ 4 –––
38 39 40 41 42 43 44 45 46 47 48 49 50
1/ 4 1/ 2
3/ 4 ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– ––– –––
.0090 .0089 .0087 .0086 .0085 .0084 .0083 .0081 .0080 .0079 .0078 .0076 .0075 .0070 .0066 .0062 .0060 .0058 .0055 .0052 .0050 .0048 .0046 .0044
47 PIVOT POINT INC.
800.222.2231
PIVOTPINS.COM
Our Mission To better serve the needs of our customers, Pivot Point Incorporated is dedicated to leading the industry of non-threaded fasteners in quality, service and continuous improvements through personalized engineered solutions, rigid ISO 9001-2000 standards, and superior efficiency. All aspects culminating into one overall objective -
Complete Customer Satisfaction!
NON-THREADED FASTENER SOLUTIONS PRECISION MACHINED COMPONENTS 761 INDUSTRIAL LANE P .O . Box 488 Hustisford, WI 53034 (800) 222-2231 (920) 349-3251 International (920) 349-3253 Fax mail@pivotpins .com
PIVOTPINS.COM