Warco West American Rubber Biltrite Rubber Sheet Products PDF Catalog Catalogue Made in USA by Murdock Industrial

visit us at warco.com

Rubber Products Catalog Fe a t u r i n g

! New Products B L AC KO U T Fluorozone INFINISIL and more!

America's choice for quality rubber.

Proudly manufactured in the USA since 1910.

Rubber Products Catalog

Table of Contents Page:

General Production Information . . . . . . . . . . . . . . . . 3 America's choice for quality rubber. Proudly manufactured in the USA since 1910

Specification Index

................................5

Buy the Foot Parts Index . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Sheet Rubber. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - Neoprene Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - Nitrile (Buna-N) Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - SBR Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - Natural Rubber Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Corporate Office 1337 Braden Court Orange, California 92868 Tel: 714-532-3355 Fax: 714-532-2238

- EPDM Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - Skirtboard & Chute Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - AASHTO Bearing Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 - Fluorozone® FKM & Viton™. . . . . . . . . . . . . . . . . . . . . . . . . . 23 - INFINISIL™ Silicone Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - Butyl Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

West American Rubber Company, LLC Sales, Manufacturing & Distribution 750 North Main Street Orange, California 92868 Tel: 714-532-3355 Fax: 714-532-2238 Email: Sales@warco.com

- Cloth Inserted (CI) Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 - Thermoplastic Elastomer (TPE) Sheet . . . . . . . . . . . . . . . . . . . 30

Rubber Mats & Matting . . . . . . . . . . . . . . . . . . . . . . . . 33 - Corrugated Matting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 - ASTM Switchboard Type 1 Matting . . . . . . . . . . . . . . . . . . 33 - KleenRite® Matting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 - FingerTrac Entrance Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Biltrite Ripley Operations, LLC Sales, Manufacturing & Distribution 16310 Highway 15 North Ripley, Mississippi 38663 Tel: 800-245-8748 Fax: 662-837-0132 Email: BiltriteSales@warco.com

- Tredair Anti-Fatigue Comfort Mats. . . . . . . . . . . . . . . . . . . 34

Rubber Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 - 60 Durometer Neoprene Tubing. . . . . . . . . . . . . . . . . . . . . 35 - Neoprene Cable Jacket Tubing to MIL-R-6855 . . . . . . . 35

Utility Tarp Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Rubber Waterstop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Product Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Terms & Conditions of Sale

. . . . . . . . . . . . . . . . . . . . . 40

visit us at warco.com

GENERAL PRODUCTION INFORMATION Our unique combination of equipment and talent allows WARCO BILTRITE to be thoroughly proficientin Large Volume, Short Run, and Custom Rubber production. Please contact our sales department for quotations on volume in excess of 1,000 lbs or on any Sheet, Matting, Extrusion, or Molded Rubber products not featured in our catalog. Additionally, we would be pleased to quote you on any custom molding, extrusion, sheet, mats, or matting products made to your requirements and specification.

For quotes, please contact customer service: Toll Free: 800-245-8748 | Tel: 714-532-3355 | Fax: 714-532-2238 | Email: sales@warco.com

Pricing: Sheet Rubber and Rubber Matting products are priced per foot ($/FT). Rubber Mats, Molded Rubber Sheets and Molded Bearing Pads are priced per each ($/EA). Extrusion is priced per foot ($/FT) or per 100 feet ($/CFT). Please call us for a quote.

Sheet Rubber Roll Length:

Regularly Stocked Sheet Item: 1 Roll Non-Regularly Stocked Item: See Product for details or call us at 1-800-254-8748 for quote Custom & Non-Catalog items: Please call for quote

Width Tolerance: Sheet Rubber comes trimmed or untrimmed. Trimmed Sheet Rubber is provided either 36”, 48”, or 72“ wide ± 1”. Untrimmed Sheet Rubber is provided either 36” usable, 48” usable, or 55“ usable and can measure approximately 3” in additional width. Custom widths are available, please call for details. Sheet Rubber Finish: Unless otherwise noted, sheet rubber has

Rubber Color: Unless otherwise noted, the standard color of our rubber is Black. Custom colors and color matching are available. Please call for details. Test Reports:

Short form test results, basic physicals, are available. Full test reports to particular specifications will be quoted on request. Certifications are sent with your order upon request at no charge.

ASTM

Toll-Free: 800-245-8748

Fraction to Decimal to Millimeter Conversion: 1/64” 1/32” 1/16” 3/32” 1/8” 3/16” 1/4” 5/16” 3/8” 1/2” 5/8“ 3/4” 7/8” 1”

Please call for details: Tel: 714-532-3355 Toll-Free: 800-245-8748 All options may not be available on all products

0.016” 0.031” 0.062” 0.093” 0.125” 0.187” 0.25” 0.312” 0.375” 0.5” 0.625“ 0.75” 0.875” 1.0”

0.397 mm 0.793 mm 1.588 mm 2.381 mm 3.175 mm 4.763 mm 6.35 mm 7.938 mm 9.525 mm 12.7 mm 15.875 mm 19.05 mm 22.225 mm 25.4 mm

Price Page Key:

36” W idt h

Payment Terms: Net 30 days. No Cash Discounts. New customer T h ic k n e ss (i n ch es )

1 /3 2 ” 1 /1 6 ” 3 /3 2 ”

D ur o m e t e r H ardne s s ( Sho r e A ± 5 )

Price of material per foot ($/FT), per each ($/EA) or per 100 feet ($/CFT)

7 5 D uro

0 7 5 F2 1 2 4 75 D ur o

$29.99

WARCO BILTRITE Part Number

44228656

$29. $ 5 4 . 5 799

Regularly Stocked Items are denoted with . Regularly Stocked Items available for purchase by the foot at warco.com/buy-the-foot are denoted with

4 2222 8 6856 856 44 4

$76.43

$54. 57

44228661

1 /8 ”

$107.98

3 /1 6 ”

$163.64

1 /4 ”

$219.95

44228344 44228662

44228666

M Y

allowed by most economical routing on shipments weighing 2,000 lbs or more to one destination, on one purchase order, within the continental United States. Freight allowance applies to WARCO BILTRITE Sheet rolls, Matting rolls & Mats only. Free prepaid freight shipments are subject to a $0.06/lb. freight surcharge and any required accessorial service charges. Standard sheet rolls are wrapped in paper, plastic or sacked in synthetic burlap.

Tel: 714-532-3355

Custom Formulations Sheet Rubber Slitting Fabric, Paper & Matte Finish Talc Free Stencilling Color Matching Tight Tolerances Custom Widths, Thicknesses and Lengths

Unless stated otherwise, products are manufactured to meet standard RMA Commercial guidelines. Per RMA, roll goods may contain multiple pieces.

Freight Terms: F.O.B. our warehouse location, Freight prepaid and

Closer tolerances and custom thicknesses are available & can be quoted on request:

Special Services and Options are Available:

price list are obtained on ASTM test slabs and buttons.

orders for shipment on open account are subject to credit approval.

.031” and thinner ± .010“ .032” to .061” ± .012“ .062” to .124” ± .016” .125” to .186” ± .020” .187” to .374” ± .031” .375” to .500” ± .047” .501” to .750” ± .094” .751” and thicker ± 10%

Products may vary, please see product listing for specific roll lengths. Per RMA, roll goods may contain multiple pieces.

Physical Properties: The minimum physical properties in this

and Product Physical Values: ASTM basic requirements for physical properties are based on values obtained from standard laboratory test specimens prepared and tested in accordance with the applicable ASTM test methods. Test results from specimens prepared from finished products may not duplicate values obtained from standard test specimens. Per ASTM D 2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation values is permissible.

(Standard RMA)

1/64” thick - 180 FT 1/32” thick - 150 FT 1/16” thick - 100 FT 3/32” thick - 65 FT or 75 FT 1/8” thick - 50 FT 3/16” thick - 30 FT or 40 FT 1/4” thick - 25 FT or 40 FT 5/16” thick - 20 FT or 25 FT 3/8” thick - 16.5 FT or 30 FT 1/2” thick - 12.5 FT or 30 FT 3/4” thick - 30 FT 1” thick - 30 FT 1 1/4” thick - 30 FT

Minimum Purchase:

a standard smooth finish. Textured (fabric) finish and matte finish are available on most materials at an additional cost. Please call for details.

Sheet Rubber Thickness Tolerance:

Standard Roll approximate length ±10%

Please call or check warco.com for a quote.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Specification Index With two full laboratories and 3,000+ rubber compounds, WARCO BILTRITE is proficient at designing formulations to meet some of the world’s most stringent specifications. In addition to the specifications listed below, WARCO BILTRITE’s technical and development team is available to assist you with your specific requirements. Please contact us for more information: Tel: 714-532-3355

Toll-Free: 800-245-8748

ASTM Specification ASTM C542 ASTM E662 ASTM D178-93 ASTM D1330 ASTM D2000 AA ASTM D2000 BA ASTM D2000 BC ASTM D2000 CA ASTM D2000 BF ASTM D2000 BG ASTM D2000 GE ASTM D2000 HK

Page 12 12 33 16 16-18, 21, 28, 33, 34 18, 19 8 - 12 20 13 13 - 15 26 25

Military Specification MIL-R-900 MIL-G-1149 MIL-R-2765 MIL-R-3065 SB MIL-R-3065 SC MIL-R-3065 RS MIL-R-6855 Class 1 MIL-R-6855 Class 2 MIL-R-21252 MIL-R-83248C MIL-R-83285 MIL-STD-454

Page 20 15 15 14 8, 9, 11 18, 19 14 11, 35 20 23, 25 20 35

AMS Aerospace Material Specification

Page 12, 23, 25, 26

FDA FDA Approved Ingredients per 21 CFR 177.2600

Page 10, 13, 14, 17, 18, 24, 25, 27, 32

Fax: 714-532-2238

Email: sales@warco.com

NSF NSF 51 NSF 61

Page 31 31

A-A & ZZ-R ZZ-R-765 2A & 2B (A-A-59588)

Page 26

SAE J200 SAE J200 AA SAE J200 BA SAE J200 BC SAE J200 BF

Page 17 18, 19 8, 9 13

Specialty Applications HHP–151F - Cloth-Inserted Fungus Resistant Transformer - General Electric A12C11E7 Low Smoke, Low Flame High, Low Temperature Fabric Reinforced

Page 28, 29 35 15

AASHTO AASHTO Grade 2 AASHTO Grade 3

Page 21, 22 22

Transportation Bio-Deisel Compatible Boeing BSS 7239 Bombardier SMP 800–C Caltrans 51–1.14 Waterstops General Motors (GMP.E/P.) Daimler Chrysler (MSAR) Ford (WSD-M2D)

Page 16 12 12 36 31 30-32 31

12 26 28, 29

In Need of a Spec Not Listed Here? WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification: Tel: 714-532-3355

Toll-Free: 800-245-8748

Fax: 714-532-2238

Tel: 714-532-3355

Email: sales@warco.com

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Made in USA | Virgin Polymer | No Regrind and No Recycled Materials BLACKOUT is a low cost neoprene blended sheet rubber designed for basic applications. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote typ. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

36, 48, 72

500

200

–20ºF to +170ºF

2.4 lb

1/16 thru 2

36, 48, 72

500

200

–20ºF to +170ºF

2.6 lb

1/16 thru 2

36, 48, 72

500

150

–20ºF to +170ºF

2.6 lb

Durometer Hardness

Thickness

1/16 thru 2

Shore A ± 5

8805

8806

8807

Width

inches

Tensile

inches

typ. %

(1/8” x 36”)

smooth finish general purpose sheet with low Commercial Neoprene - Style 10 Atemperature flexibility and oil resistance. Resists rotting, checking, and cracking due to weather exposure. Designed to meet ASTM specifications for 1 BC Material. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

800

350

–20ºF to +170ºF

2.5 lb

ASTM D 2000 1BC 408, SAE J200 1BC 408, MIL-R-3065 SC 408 Z1*

1/32 thru 2

36, 48, 72

800†

300

–20ºF to +170ºF

2.6 lb

ASTM D 2000 1BC 508, SAE J200 1BC 508, MIL-R-3065 SC 508

1/32 thru 2

36, 48, 72

900†

300

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BC 609, SAE J200 1BC 609, MIL-R-3065 SC 609

1/32 thru 2

36, 48, 72

1000

200

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BC 710, SAE J200 1BC 710, MIL-R-3065 SC 710

1/32 thru 2

36, 48, 72

1000

100

–20ºF to +170ºF

2.8 lb

ASTM D 2000 1BC 810, SAE J200 1BC 810, MIL-R-3065 SC 810

Durometer Hardness

Thickness

1/16 thru 1

Shore A ± 5

8014 & 8144

8015 & 8145

8016 & 8146

8017 & 8147

8018 & 8148

inches

Width inches

Tensile

min. %

(1/8” x 36”)

*Z1 = Elongation: 350% min † = 1,000 psi Product is Available - Please contact Customer Service for details.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

commercial blended neoprene sheet with a matte Matte Finish Neoprene - Style 12 Afinish on one side. It is free of talc and release solutions which make it excellent for applications that involve the use of pressure sensitive adhesives (PSA). Finish: Matte Finish on one side, Smooth on reverse side Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote Durometer Hardness Shore A ± 5

Thickness inches

Width inches

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

Tensile

min. %

(1/8” x 36”)

1/16 thru 1/4

800

300

–20ºF to +170ºF

2.6 lb

ASTM D 2000 1BC 508, SAE J200 1BC 508, MIL R 3065 SC 508

1/16 thru 1/4

36, 72

900

300

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BC 609, SAE J200 1BC 609, MIL R 3065 SC 609

1/16 thru 1/4

36, 72

1000

200

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BC 710, SAE J200 1BC 710, MIL R 3065 SC 710

1/16 thru 1/4

36, 72

1000

100

–20ºF to +170ºF

2.8 lb

ASTM D 2000 1BC 810, SAE J200 1BC 810, MIL R 3065 SC 810

8015

8016

8017

8018

*Supplied Talc-Free

premium grade blended sheet for Mid-Grade Neoprene - 5100 Series Aapplications requiring a higher percentage of Neoprene and wider temperature range than standard commercial grade. This Neoprene formula has great resistance to weathering and moderate resistance to oil and gasoline. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1/32 thru 1/4

36, 48

450

300

–30ºF to +200ºF

2.2 lb

ASTM D 2000 M1BC 303

1/32 thru 1/4

36, 48

450

300

–30ºF to +200ºF

2.45 lb

ASTM D 2000 M1BC 403

1/64 thru 1/2

36, 48

1000

300

–30ºF to +200ºF

2.46 lb

ASTM D 2000 M1BC 507

1/64 thru 1/2

36, 48

1000

300

–30ºF to +200ºF

2.48 lb

ASTM D 2000 M1BC 607

1/64 thru 1/4

36, 48

1000

200

–30ºF to +200ºF

2.52 lb

ASTM D 2000 M1BC 707

1/32 thru 1/4

36, 48

1000

100

–30ºF to +200ºF

2.75 lb

ASTM D 2000 M1BC 807

Shore A ± 5 030E1084

040E0423

050E0357 060E0264

070E0321

080E1109

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Can’t Find the Spec You’re Looking For? WARCO BILTRITE has the knowledge, talent and expertise to formulate rubber compounds to meet some of the world’s most stringent specifications. Contact us today to learn how WARCO BILTRITE’s technical and development team can help you meet your specification: Tel: 714-532-3355

Toll-Free: 800-245-8748

Fax: 714-532-2238

Tel: 714-532-3355

Email: sales@warco.com

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

product is designed to give Premium Neoprene (100% Neoprene) This maximum performance and service, resisting degradation from ozone and performing well in contact with oils and many chemicals. Premium Neoprene exhibits integrity over a wide temperature range as well as an outstanding resistance to damage caused by flexing and twisting. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1/32 thru 1/4

36, 48

450

300

–30ºF to +220ºF

2.43 lb

ASTM D 2000 M1BC 303

1/64 thru 1/4

36, 48

1000

400

–30ºF to +220ºF

2.46 lb

ASTM D 2000 M1BC 407

1/64 thru 1/4

36, 48

1450

350

–30ºF to +220ºF

2.54 lb

ASTM D 2000 M1BC 510

1/64 thru 1/4

36, 48

1450

350

–30ºF to +220ºF

2.65 lb

ASTM D 2000 M1BC 610

1/64 thru 1/4

36, 48

1450

250

–30ºF to +220ºF

2.77 lb

ASTM D 2000 M1BC 710

1/64 thru 1/4

36, 48

1450

100

–30ºF to +220ºF

2.79 lb

ASTM D 2000 M1BC 810

1/32 thru 1/4

36, 48

1000

100

–30ºF to +220ºF

2.81 lb

ASTM D 2000 M1BC 907

Shore A ± 5

030E 0242

040E 0247

050E 0503

060E 0306

070E 0313

080E 0325

090E 0228

inches

Width inches

Tensile

min. %

(1/8” x 36”)

FDA Neoprene This off-white Neoprene material contains FDA approved ingredients per 21 CFR 177.2600, an FDA regulation dealing with rubber articles articles intended for repeated food exposure. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/32 thru 1/4

Shore A ± 5

0 4 0 E1 0 5 8

0 5 5 E1 0 5 3

0 6 0 E1 0 6 2

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

600

400

–30ºF to +220ºF

2.65 lb

FDA Approved Ingredients per 21 CFR 177.2600

1/32 thru 1/4

36, 48

800

350

–30ºF to +220ºF

2.98 lb

FDA Approved Ingredients per 21 CFR 177.2600

1/32 thru 1/4

36, 48

1000

300

–30ºF to +220ºF

2.98 lb

FDA Approved Ingredients per 21 CFR 177.2600

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Neoprene Performance Molded Sheets Available in 36”x36” or 48”x48” - Longer lengths available, please call for quote. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1/8 thru 4

36 x 36 48 x 48

500

550

–30ºF to +200ºF

5.5 lb

---

1/8 thru 4

36 x 36 48 x 48

500

350

–30ºF to +200ºF

5.4 lb

---

1/8 thru 4

36 x 36 48 x 48

500

300

–30ºF to +200ºF

5.88 lb

---

1/8 thru 4

36 x 36 48 x 48

700

250

–30ºF to +200ºF

5.9 lb

---

1/8 thru 4

36 x 36 48 x 48

700

150

–30ºF to +200ºF

6.15 lb

---

1/8 thru 4

36 x 36 48 x 48

700

100

–30ºF to +200ºF

6.4 lb

---

Shore A ± 5

020E0241

040E0913 050E0914

060E0915

070E0916

080E0888

inches

Sizes* inches

Tensile

min. %

(5/16” x 36”)

*For 30 FT lengths, please see Commercial Neoprene - Style 10.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

ASTM D 2000 M2BC (Neoprene) Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

1/64 thru 1/4

36, 48

1450

500

–50ºF to +220ºF

2.45 lb

1/64 thru 1/4

36, 48

1450

350

–60ºF to +220ºF

2.53 lb

1/64 thru 1/4

36, 48

1450

350

–50ºF to +220ºF

2.69 lb

ASTM D 2000 M2BC 610 A14 B14 C12 E034 F17

1/64 thru 1/4

36, 48

1450

250

–60ºF to +220ºF

2.67 lb

ASTM D 2000 M2BC 710 A14 B14 C12 E034 F17

inches

Shore A ± 5

040E0687

050E0218

060E0700

070E0722

Width inches

Tensile

min. %

Specifications

(1/8” x 36”)

ASTM D 2000 M2BC 410 A14 B14 C12 E034 F17 ASTM D 2000 M2BC 510 A14 B14 C12 E034 F17

MIL-R-6855 Class 2 (A & B) - Oil Resistant Neoprene Finish: Smooth Durometer Hardness

Color: Black Trim: Untrimmed

Thickness inches

Shore A ± 5

Width inches

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

Tensile

min. %

(1/8” x 36”)

(slabs only)

1/8 thru 4

36 x 36 48 x 48

1200

500

–50ºF to +220ºF

2.36 lb

MIL-R-6855 Class 2, Grade 30, Type A&B

1/64 thru 1/4

36, 48

1300

500

–50ºF to +220ºF

2.45 lb

MIL-R-6855 Class 2, Grade 40, Type A&B

1/64 thru 1/4

36, 48

1500

350

–50ºF to +220ºF

2.53 lb

MIL-R-6855 Class 2, Grade 50, Type A&B

1/64 thru 1/4

36, 48

1500

300

–50ºF to +220ºF

2.69 lb

MIL-R-6855 Class 2, Grade 60, Type A&B

1/64 thru 1/4

36, 48

1600

200

–40ºF to +220ºF

2.67 lb

MIL-R-6855 Class 2, Grade 70, Type A&B

1/64 thru 1/4

36, 48

1600

150

–40ºF to +220ºF

2.78 lb

MIL-R-6855 Class 2, Grade 80, Type A&B

030E0811

040E0687

050E0785

060E0700

070E0711

080E0702

MIL-R-3065 SC (Neoprene) Finish: Smooth

Color: Black Trim: Untrimmed

Durometer Hardness

Thickness

1/32 thru 1/4

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1000

400

–60ºF to +220ºF

2.39 lb

MIL-R-3065 SC 310 F1

1/64 thru 1/4

36, 48

1000

400

–60ºF to +220ºF

2.47 lb

MIL-R-3065 SC 410 F2

1/64 thru 1/4

36, 48

1500

350

–60ºF to +220ºF

2.61 lb

MIL-R-3065 SC 515 F2

1/64 thru 1/4

36, 48

1500

300

–60ºF to +220ºF

2.65 lb

MIL-R-3065 SC 615 F2

1/64 thru 1/4

36, 48

1500

250

–60ºF to +220ºF

2.61 lb

MIL-R-3065 SC 715 F2

1/64 thru 1/4

36, 48

1500

100

–60ºF to +220ºF

2.61 lb

MIL-R-3065 SC 815 F1

Shore A ± 5 030E0693 040E0726

050E0727

060E0724

070E0722

080E0701

inches

Width inches

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Aerospace Material Specification (AMS) Finish: Smooth

Color: Black Trim: Untrimmed

Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5

050E0785

050E0705

070P0452

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1500

350

–40ºF to +220ºF

2.53 lb

AMS 3205 Low Temperature (Neoprene)

1/64 thru 1/4

36, 48

1200

300

–30ºF to +220ºF

2.51 lb

AMS 3208 Weather Resistant (Neoprene)

1/64 thru 1/4

36, 48

1500

250

–30ºF to +220ºF

2.45 lb

AMS 3215 Fuel Resistant (Nitrile)

inches

Width inches

Tensile

min. %

(1/8” x 36”)

specially formulated sheet product line prevents the growth of Anti-Microbial Neoprene This bacteria, fungi, and yeasts while avoiding obstacles that organic biocides have posed in the past. This product can alleviate cleaning challenges in food-processing, medical, industrial, and other applications prone to microbial growth. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

40**

1/32 thru 1/4

50** 60

Shore A ± 5

040E 0737

050E 0970

060E 0969

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1000

500

–50ºF to +220ºF

2.44 lb

ASTM D 2000 M2BC 407 A14 B14 C12 F17 Z1*

1/32 thru 1/4

1450

350

–40ºF to +220ºF

2.98 lb

ASTM D 2000 M2BC 510 A14 B14 C12 F17 Z1*

1/32 thru 1/4

1450

350

–30ºF to +220ºF

2.98 lb

ASTM D 2000 M2BC 610 A14 B14 C12 Z1*

inches

Width inches

Tensile

min. %

(1/8” x 36”)

*Z1=Fungus resistance per MIL STD 810, Method 508 **This material is also available with MIL-R-6855 Class 2 (Grade 40 & Grade 50), MIL STD 810E Method 508.4 specification. Please contact Customer Service for a quote.

Low Smoke, Low Flame, Low Toxicity Neoprene Another example of the extensive capabilities of our laboratory. WARCO BILTRITE fire retardant elastomers offer significant benefits for gasketing and noise control inside railcars. The unique formulations of our highly engineered elastomers allow to safely resist the distribution of flame while emitting very low amounts of toxic smoke. This material is designed and formulated to meet the mass transit industry’s most demanding requirements and specifications for smoke generation (ASTM E 662), flame propogation (ASTM C 542), and toxic fume production (SMP 800-C). Rail transit, truck, bus or automotive, WARCO BILTRITE has the material to meet your requirements. Finish: Nylon Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/32 thru 1/4

Shore A ± 5

065E 1344

inches

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

1200

300

–30ºF to +220ºF

2.98 lb

Tensile

min. %

Specifications

(1/8” x 36”)

ASTM E 662, ASTM C 542 (ASTM C 1166 Procedure), Bombardier SMP 800-C*, Boeing BSS 7239, UL 94VO**

*Certified by Bodycote Materials Testing Canada, Inc. **This material meets the flame requirement for UL 94VO, but is not UL listed.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

smooth finish blended Nitrile sheet, which is offered in a Commercial Nitrile - Style 35 Arange of five durometers (40 thru 80 durometer) in order to perform in a wide variety of applications. Designed to meet ASTM specifications for 1BF material. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1/16 thru 1

36, 48

800

350

–20ºF to +170ºF

2.5 lb

ASTM D 2000 1BF 408 Z1*, SAE J200 1BF 408 Z1*

1/32 thru 1

36, 48

800

300

–20ºF to +170ºF

2.6 lb

ASTM D 20001BF 508 Z1,* SAE J200 1BF 508 Z1*

1/32 thru 1

36, 48

900

200

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BF 609, SAE J200 1BF 609

1/32 thru 1

36, 48

1000

200

–20ºF to +170ºF

2.7 lb

ASTM D 2000 1BF 710, SAE J200 1BF 710

1/32 thru 1

36, 48

1000

100

–20ºF to +170ºF

2.8 lb

ASTM D 2000 1BF 810, SAE J200 1BF 810

inches

Shore A ± 5

8224 & 8354

8225 & 8355

8226 & 8356

8227 & 8357

8228 & 8358

Width inches

Tensile

min. %

(1/8” x 36”)

*Z1 = Meets basic requirements for BF materials. Physical properties are as listed.

material is formulated to give excellent fuel and oil resistance and a longer service life Premium Nitrile This in demanding applications. Finish: Smooth

Color: Black Trim: UnTrimmed

Durometer Hardness

Thickness

1/64 thru 1/4

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1000

450

–30ºF to +220ºF

2.22 lb

ASTM D 2000 M1BG 407

1/64 thru 1/4

36, 48

1000

350

–30ºF to +220ºF

2.32 lb

ASTM D 2000 M1BG 507

1/64 thru 1/4

36, 48

1450

300

–30ºF to +220ºF

2.36 lb

ASTM D 2000 M1BG 610

1/64 thru 1/4

36, 48

1450

250

–30ºF to +220ºF

2.48 lb

ASTM D 2000 M1BG 710

1/64 thru 1/4

36, 48

1450

125

–30ºF to +220ºF

2.59 lb

ASTM D 2000 M1BG 810

1/32 thru 1/4**

36, 48

1450

100

–30ºF to +220ºF

2.34 lb

ASTM D 2000 M1BG 910

Shore A ± 5

040P0179

050P0266

060P0187

070P0135

080P0206

090P0270

inches

Width inches

Tensile

min. %

(1/8” x 36”)

*1/4” thick 90 durometer material available in slabs only.

37 is specially formulated for its whiteness, used in food, FDA Nitrile - Style 37 Style phamaceutical, and cosmetic processing. Made from FDA-approved ingredients per 21CFR 177.2600, it is non-marking, non-allergenic, and safe to use for repeated food exposure. It has good oil and abrasion resistance and handles oily and greasy food products well. This product conforms with 3-A Sanitary 18-03 requirements for multiple use rubber Class III and Class IV. Finish: Smooth Color: White Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness

1/16 thru 1/4

Shore A ± 5

8035

inches

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1000

350

–25ºF to +180ºF

2.8 lb

ASTM D 2000 1BG 610, FDA Approved Ingredients per 21 CFR 177.2600

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

its name implies, this material is specially formulated for its WARCO White® FDA Nitrile Aswhiteness and is used extensively in food and pharmaceutical

environments. It is formulated with FDA-approved ingredients. It is non-toxic, non-marking and non-allergenic. It exhibits good abrasion resistance and handles oily and greasy food products well. All materials are made with FDA approved ingredients per 21 CFR 177.2600 and are intended for repeated food exposure. Finish: Smooth Color: White Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1/32 thru 1/2

36, 48

450

300

–30ºF to +220ºF

2.71 lb

ASTM D 2000 M1BG 503 Z1 Z2 Z3,* FDA approved ingredients per 21 CFR 177.2600

1/32 thru 1/2

36, 48

1000

250

–30ºF to +220ºF

2.75 lb

ASTM D 2000 M1BG 607 Z1 Z2 Z3,* FDA approved ingredients per 21 CFR 177.2600

1/32 thru 1/2

36, 48

1000

200

–30ºF to +220ºF

2.95 lb

ASTM D 2000 M1BG 707 Z1 Z2 Z3,* FDA approved ingredients per 21 CFR 177.2600

1/32 thru 1/4

36, 48

450

100

–30ºF to +220ºF

3.31 lb

ASTM D 2000 M1BG 803 Z1 Z2*,* FDA approved ingredients per 21 CFR 177.2600

Shore A ± 5

045P0152

055P0146

065P0364

080P0100

Inches

Width Inches

Tensile

min. %

(1/8” x 36”)

*Z1 = ± 5 Durometer, Z2 = FDA Ingredients per 21 CFR 177.2600, Z3 = White in Color **Z1 = FDA Ingredients per 21 CFR 177.2600, Z2 = White in Color WARCO WHITE® is a registered trademark of West American Rubber Company, LLC. All rights reserved.

MIL-R-6855 Class 1 (Fuel Resistant Nitrile) Finish: Smooth

Color: Black Trim: Untrimmed

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1100

450

–50ºF to +220ºF

2.15 lb

MIL-R-6855 Class 1 Grade 40

1/64 thru 1/4

36, 48

1200

350

–50ºF to +220ºF

2.38 lb

MIL-R-6855 Class 1 Grade 50

1/64 thru 1/4

36, 48

1300

300

–50ºF to +220ºF

2.42 lb

MIL-R-6855 Class 1 Grade 60

1/64 thru 1/4

36, 48

1400

200

–50ºF to +220ºF

2.5 lb

MIL-R-6855 Class 1 Grade 70

1/64 thru 1/4

36, 48

1600

150

–50ºF to +220ºF

2.46 lb

MIL-R-6855 Class 1 Grade 80

Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5 040P0471

050P0472

060P0473

070P0474

080P0475

Width inches

Tensile

min. %

(1/8” x 36”)

MIL-R-3065 SB (Nitrile) Finish: Smooth

Color: Black Trim: Untrimmed

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1000

450

–60ºF to +220ºF

2.22 lb

MIL-R-3065 SB 410 F2

1/64 thru 1/4

36, 48

1500

400

–60ºF to +220ºF

2.22 lb

MIL-R-3065 SB 515 F2

1/64 thru 1/4

36, 48

1500

300

–60ºF to +220ºF

2.28 lb

MIL-R-3065 SB 615 F2

1/64 thru 1/4

36, 48

1500

250

–60ºF to +220ºF

2.35 lb

MIL-R-3065 SB 715 F2

1/64 thru 1/4

36, 48

1500

125

–40ºF to +220ºF

2.45 lb

MIL-R-3065 SB 815 F1

Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5

040P0477

050P0468

060P0461

070P0444

080P0475

inches

Width inches

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

ASTM D 2000 M5BG (Nitrile) Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

1/64 thru 1/4

36, 48

1000

450

–40ºF to +220ºF

2.14 lb

1/64 thru 1/4

36, 48

1000

350

–40ºF to +220ºF

2.22 lb

1/64 thru 1/4

36, 48

1450

300

–40ºF to +220ºF

2.41 lb

ASTM D 2000 M5BG 610 A14 B14 E014 E034 F17

1/64 thru 1/4

36, 48

1450

250

–40ºF to +220ºF

2.41 lb

ASTM D 2000 M5BG 710 A14 B14 E014 E034 F17

inches

Shore A ± 5

040P0626

050P0683

060P0450

070P0627

Width inches

MIL-G-1149 Finish: Smooth Color: Black Durometer Hardness

Thickness

1/64 thru 1/4

050A0172

050P0447

min. %

Trim: Untrimmed

ASTM D 2000 M5BG 407 A14 B14 E014 E034 F17 ASTM D 2000 M5BG 507 A14 B14 E014 E034 F17

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Ultimate Elongation

Temperature Range

Estimated Weight Per Linear Foot

Specifications

36, 48

1000

300

–30ºF to +200ºF

2.67 lb

MIL-G-1149 Type 1 Class 1 Grade 50 (Neoprene)

1/64 thru 1/4

36, 48

1000

300

–40ºF to +180ºF

2.13 lb

MIL-G-1149 Type 1 Class 2 Grade 50 (SBR)

1/64 thru 1/4

36, 48

1000

300

–40ºF to +200ºF

2.32 lb

MIL-G-1149 Type 1 Class 5 Grade 50 (Nitrile)

Width inches

Tensile

min. %

MIL-R-2765 (Nitrile) Finish: Smooth

Color: Black Trim: Untrimmed

Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5 040P0445

Specifications

(1/8” x 36”)

min. psi

inches

Shore A ± 5

050E0189

Tensile

Width inches

36, 48

(1/8” x 36”)

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1000

300

–50ºF to +220ºF

2.24 lb

MIL-R-2765

Tensile

min. %

(1/8” x 36”)

A Nitrile material designed specifically for the transformer oil market; helping

Transformer Oil Nitrile to dissipate the likelihood of high electrostatic charging tendencies. These highly engineered materials, in addition to meeting their respective ASTM D 2000 line call-outs, meet industry specification GE A12C11E7. Finish: Smooth Durometer Hardness Shore A ± 5

Color: Black Trim: Untrimmed

Thickness inches

Width Inches

Tensile min. psi

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

Ultimate Elongation min. %

Temperature Range

Estimated Weight Per Foot

1/32 thru 1/2

36, 48

2000

300

–30ºF to +250ºF

2.36 lb

1/32 thru 1/2

36, 48

2000

250

–20ºF to +250ºF

2.42 lb

060P0996

070P0807

Tel: 714-532-3355

Specifications

(1/8” x 36”)

ASTM D 2000 5BG 620 A14 B14 E034; General Electric A12C11E7 ASTM D 2000 5BG 720 A14 B14 E034; General Electric A12C11E7

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

designed and developed for use in environments where alternative fuels are Bio-Diesel Nitrile Specially present. Immersion test results indicate that these materials are compatible with alternative fuels and are suitable for Bio-Diesel B20 (20% Bio-Diesel and 80% Petroleum Diesel) & Bio-Diesel B100 (100% Bio-Diesel). Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/32 thru 1/2

inches

Shore A ± 5 060P0678

070P1042

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Features

36, 48

1500

300

–30ºF to +220ºF

2.39 lb

Compatible with Bio-Diesel B20 & B100

36, 48

1500

250

–30ºF to +220ºF

2.4 lb

Compatible with Bio-Diesel B20 & B100

Width inches

Tensile

min. %

(1/8” x 36”)

red sheet for use in low pressure applications with Red Rubber SBR - Style 20 Anno oileconomical resistant requirements. 100 lb (half) rolls are also available. Please call for quote. Finish: Smooth (Also available in fabric finish) Color: Red (Also available in Black) Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness inches

Shore A ± 5

8010

1/32 thru 1/4

Width inches

36, 48, 72

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

400

150

–20ºF to +170ºF

3.5 lb

ASTM D 1330 Grade 2, ASTM D 2000 1AA 704 Z1

Tensile

min. %

(1/8” x 36”)

( Z 1 = 7 5 ± 5 Du ro me t e r)

Specification Grade SBR

A premium grade SBR sheet with a high tensile strength. Well suited for the heating and plumbing trades. Has good aging, abrasion and tear resistant properties. Refer to physical properties and ASTM data in assessing suitability for intended applications. Finish: Smooth Color: Red (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/16 thru 1/4

inches

Shore A ± 5

075A0370

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

450

150

–40ºF to +180ºF

3.0 lb

ASTM D 2000 M1AA 703 Z1 (Z1 = 75 ± 5 Durometer)

Tensile

min. %

(1/8” x 36”)

Premium SBR - Style 22 Finish: Smooth

Color: Black Trim: Trimmed

Durometer Hardness

Thickness

1/16 thru 1/4

Shore A ± 5

8008

inches

Width inches

Non-Stock Minimum: Please call 1-800-245-8748 for quote

psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

700

150

–20ºF to +170ºF

2.7 lb

ASTM D 1330 Grade 1

Tensile

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Natural Rubber - Style 28

Excellent physical properties such as superior resilience, tensile, elongation, and abrasion resistance. Style 28 is a tan floating stock and is produced entirely with FDA approved ingredients. It has good tear strength and is resistant to water most salts, mild acids and other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases and most hydrocarbons. Non-marking and safe to use for repeated food exposure. Finish: Smooth Color: Tan Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote

Durometer Hardness

Thickness

1/16 thru 1

Shore A ± 5

8031 & 8131

inches

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

3000

600

–20ºF to +140ºF

1.9 lb

ASTM D 2000 1AA 430, SAE J200 1AA 430, FDA Approved Ingredients per 21 CFR 177.2600

Tensile

min. %

(1/8” x 36”)

addition to our Tan Natural Rubber - Style 28, our Black Natural Rubber Black Natural Rubber Inexhibits extremely good resiliency and abrasion resistance. It has good tear strength and is resistant to water, most salts and mild acids. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

2500

500

–40ºF to +160ºF

1.91 lb

ASTM D 2000 M1AA 417

1/64 thru 1/4

36, 48

2500

400

–40ºF to +160ºF

2.07 lb

ASTM D 2000 M1AA 517

1/64 thru 1/4

36, 48

2500

400

–40ºF to +160ºF

2.28 lb

ASTM D 2000 M1AA 617

Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5 040R0246

050R0566

060R0134

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Tan Pure Gum Floating stock has superior Pure Gum Floating Natural Rubber Light resilience, tensile, elongation and abrasion resistance properties. Light Tan Natural Rubber is produced entirely with FDA approved ingredients per 21 CFR 177.2600. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Not suited for environments involving ozone, strong acids, animal fats, oils, greases, and most hydrocarbons. Non-marking and safe to use for repeated food exposure. Finish: Smooth Color: Light Tan (Also available in Black) Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/16 thru 1/2

Shore A ± 5

040R0149

Inches

Width Inches

36, 48

min. psi

Ultimate Elongation*

Temperature Range

Estimated Weight Per Foot

Specifications

2500

500

–40ºF to +160ºF

1.91 lb

ASTM D 2000 M1AA 417, FDA Approved Ingredients PER 21CFR 177.2600

Tensile*

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

EZ Cut Non-Floating Gum Natural Rubber Superior resilience, tensile, elongation and abrasion resistance properties. It has good tear strength and is resistant to water, most salts, mild acids, and many other chemicals. Made with FDA approved ingredients per 21 CFR 177.2600. Finish: Smooth Color: Dark Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5

0 4 0 R0 5 7 9

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

2500

500

–40ºF to +160ºF

2.19 lb

Tensile

min. %

Specifications

(1/8” x 36”)

ASTM D 2000 M1AA 417, FDA approved ingredients per 21 CFR 177.2600

Protein Free (Synthetic Polyisoprene) Natural Rubber This offering represents a synthetic polyisoprene which does not contain protein, which can cause allergic reactions in some cases. All materials are made with FDA approved ingredients per 21 CFR 177.2600. Finish: Smooth Color: Light Tan Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5

040R0526

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

2500

500

–40ºF to +160ºF

1.91 lb

ASTM D 2000 M1AA 417, FDA approved ingredients per 21CFR 177.2600

Tensile

min. %

(1/8” x 36”)

This material does not contain protein, which may cause alergic reactions.

Natural Rubber is an outstanding abrasion resistant Tuff-Stuff® Natural Rubber Tuff-Stuff® material. Tuff-Stuff® delivers an optimum combination of tear, abrasion, noise, and impact resistance resulting in reduced maintenance costs and longer service life from capital equipment. Tuff-Stuff® and Tuff-Stuff Plus® have each been specifically formulated and field proven to deliver the ultimate in durability and long life for high production mineral and aggregate facilities. Tear Resistance (Die C) = 200 PPI. Finish: Smooth Color: Red Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/8 thru 2

inches

Shore A ± 5

040R0573

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

2500

500

–40ºF to +160ºF

1.93 lb

ASTM D 2000 M4AA 421 F17 G21

Tensile

min. %

(1/8” x 36”)

Commercial EPDM - Style 40 Our most economical EPDM sheet offered. Intended to be used in less critical applications where temperatures are of an intermittent nature. Finish: Smooth Durometer Hardness Shore A ± 5

8058

8060

8061

Color: Black Trim: Trimmed

Thickness inches

Width inches

Non-Stock Minimum: Please call 1-800-245-8748 for quote

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

Tensile

min. %

(1/8” x 36”)

1/16 thru 1/4

36, 48

800

300

–40ºF to +212ºF

2.5 lb

ASTM D 2000 3BA 508 C12, SAE J200 3BA 508 C12, MIL-R-3065 RS 508 C1

1/16 thru 1/4

36, 48

800

250

–40ºF to +212ºF

2.6 lb

ASTM D 2000 3BA 608 C12, SAE J200 3BA 608 C12, MIL-R-3065 RS 608 C1

1/16 thru 1/4

36, 48

800

150

–40ºF to +212ºF

2.7 lb

ASTM D 2000 3BA 708 C12, SAE J200 3BA 708 C12, MIL-R-3065 RS 708 C1

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Premium EPDM - Style 45 High Grade EPDM is suited for applications where a high performance rating is required. It exhibits excellent resistance to heat, ozone and sunlight and has good temperature flexibility. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness Shore A ± 5

8054

8053

8051

8052

Thickness inches

1/16 thru 1/4

Width inches

36, 48

Tensile min. psi

1500

Ultimate Elongation min. %

400

350

250

150

Temperature Range

–40ºF to +225ºF

Estimated Weight Per Foot

Specifications

2.2 lb

ASTM D 2000 3BA 515 A14 B13 C12 F17, SAE J200 3BA 515 A14 B13 C12 F17, MIL-R-3065 RS 515 C1 F1

2.2 lb

ASTM D 2000 3BA 615 A14 B13 C12 F17, SAE J200 3BA 615 A14 B13 C12 F17, MIL-R-3065 RS 615 C1 F1

2.2 lb

ASTM D 2000 3BA 715 A14 B13 C12 F17, SAE J200 3BA 715 A14 B13 C12 F17, MIL-R-3065 RS 715 C1 F1

2.2 lb

ASTM D 2000 3BA 815 A14 B13 C12 F17, SAE J200 3BA 815 A14 B13 C12 F17, MIL-R-3065 RS 815 C1 F1

(1/8” x 36”)

EPDM best suited for applications where a high performance rating is required. Premium EPDM AnFinish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1015

300

–50ºF to +220ºF

2.03 lb

ASTM D 2000 M2BA 407 C12 F17

1/64 thru 1/4

36, 48

1015

300

–50ºF to +220ºF

2.2 lb

ASTM D 2000 M2BA 507 C12 F17

1/64 thru 1/4

36, 48

1015

300

–50ºF to +220ºF

2.22 lb

ASTM D 2000 M2BA 607 C12 F17

1/64 thru 1/4

36, 48

1015

200

–50ºF to +220ºF

2.28 lb

ASTM D 2000 M2BA 707 C12 F17

1/64 thru 1/4

36, 48

1450

150

–50ºF to +220ºF

2.28 lb

ASTM D 2000 M2BA 810 C12 F17

Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5

0 4 0 K0 0 3 8

0 5 0 K0 0 4 2

0 6 0 K0 0 2 0

0 7 0 K0 0 5 2

0 8 0 K0 0 3 6

Inches

Width Inches

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

cured EPDM provides exceptional heat and aging stability and better Peroxide Cure EPDM Peroxide compression set performance at higher temperatures. Most peroxides do not Finish: Smooth

bloom and have better color control and stability. Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1450

500

–60ºF to +300ºF

2.13 lb

ASTM D 2000 M4CA 410 A25 B35 C32 EA14 F19

1/64 thru 1/4

36, 48

1450

300

–60ºF to +300ºF

2.1 lb

ASTM D 2000 M4CA 510 A25 B35 C32 EA14 F19

1/64 thru 1/4

36, 48

1450

250

–60ºF to +300ºF

2.15 lb

ASTM D 2000 M4CA 610 A25 B35 C32 EA14 F19

1/64 thru 1/4

36, 48

1450

200

–60ºF to +300ºF

2.2 lb

ASTM D 2000 M4CA 710 A25 B35 C32 EA14 F19

1/64 thru 1/4

36, 48

1450

150

–60ºF to +300ºF

2.32 lb

ASTM D 2000 M4CA 810 A25 B35 C32 EA14 F19

Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5

040K0175

050K0474

060K0190

070K0186

080K0386

Width inches

Tensile

min. %

MIL-R-21252 (EPDM) Finish: Smooth

Color: Black Trim: Untrimmed

Durometer Hardness

Thickness

1/64 thru 1/4

inches

Shore A ± 5 0 8 5 K0 1 0 4

Width inches

36, 48

(1/8” x 36”)

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1600

–40ºF to +220ºF

2.3 lb

MIL-R-21252

Tensile

min. %

(1/8” x 36”)

MIL-R-83285 Grade 80 (EPDM) Finish: Smooth Durometer Hardness

Thickness inches

Shore A ± 5

0 8 0 K0 3 8 6

Color: Black Trim: Untrimmed

1/64 thru 1/4

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

2000

150

–60ºF to +300ºF

2.32 lb

MIL-R-83285 Grade 80

Tensile

MIL-R-900 (EPDM) Finish: Smooth

Thickness

1/64 thru 1/4

0 4 5 K0 4 3 8

min. %

Color: Black Trim: Untrimmed

Durometer Hardness Shore A ± 5

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

inches

Width inches

36, 48

(1/8” x 36”)

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

1000

300

–40ºF to +180ºF

2.1 lb

MIL-R-900

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

ASTM D 2000 M4AA (EPDM) Finish: Smooth

Color: Black Trim: Untrimmed

Durometer Hardness

Thickness

1/64 thru 1/4

Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote)

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1450

400

–60ºF to +300ºF

2.1 lb

ASTM D 2000 M4AA 407 A13 B13 C12 F17

1/64 thru 1/4

36, 48

1450

400

–60ºF to +300ºF

2.08 lb

ASTM D 2000 M4AA 510 A13 B13 C12 F17

1/64 thru 1/4

36, 48

1450

350

–60ºF to +300ºF

2.14 lb

ASTM D 2000 M4AA 610 A13 B13 C12 F17

1/64 thru 1/4

36, 48

1450

250

–60ºF to +300ºF

2.2 lb

ASTM D 2000 M4AA 710 A13 B13 C12 F17

Shore A ± 5

0 4 0 K0 1 7 5

0 5 0 K0 3 3 6

0 6 0 K0 1 9 0

0 7 0 K0 1 8 6

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Skirtboard & Chute Lining - Style 25 A commercial blended SBR compound used to control wear on surfaces impacted by solid materials and slurries. Good abrasion and tear resistance. Protects surfaces such as chutes, skirtboards, impact areas, and tumblers. This product is also available in extruded 50 FT straight lengths. May also be customized with beveled or chamfered edges. Please call for dimensions and a quote. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness

1/8 thru 1

Shore A ± 5 8055

inches

Width inches

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Features

1500

300

–20ºF to +170ºF

3.3 lb

Good abrasion and tear resistance

Tensile

min. %

(1/8” x 36”)

AASHTO Unsupported Neoprene Bearing Pads - Style 71 Available in lengths up to 30’. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness

1/4 thru 1

Shore A ± 5

8065

8066

8067

Weight Per Foot

min. psi

Ultimate Elongation

Temperature Range

(1/2” x 36”)

2250

400

–40ºF to +220ºF

15.8 lb

AASHTO Grade 2* Neoprene

1/4 thru 1

2250

350

–40ºF to +220ºF

16 lb

AASHTO Grade 2* Neoprene

1/4 thru 1

2250

300

–40ºF to +220ºF

12.2 lb

AASHTO Grade 2* Neoprene

inches

Width inches

Tensile

min. %

Specification

Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway and Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1. *Other AASHTO grades are available. Please contact customer service for details.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

AASHTO Unsupported Natural Rubber Bearing Pads - Style 72 Natural Rubber Unsupported AASHTO Bearing Pads are available in Grade 2 (other grades also available) in lengths up to 30 feet. Longer lengths available, please call for quote. Also available in 36” x 36” and 48” x 48” slabs. Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call 1-800-245-8748 for quote Durometer Hardness

Thickness

1/4 thru 1

Shore A ± 5

8091

8093

8095

Weight Per Foot

min. psi

Ultimate Elongation

Temperature Range

(1/2” x 36”)

2250

450

–40ºF to +160ºF

11.8 lb

AASHTO Grade 2* Natural Rubber

1/4 thru 1

2250

400

–40ºF to +160ºF

12 lb

AASHTO Grade 2* Natural Rubber

1/4 thru 1

2250

300

–40ºF to +160ºF

12.2 lb

AASHTO Grade 2* Natural Rubber

inches

Width inches

Tensile

min. %

Specification

Certain states specify requirements other than standard AASHTO specifications. When ordering, identify all requirements or submit individual state specifications. Above meets the Standard Specifications for Highway Bridges, adopted by the American Association of State Highway & Transportation Officials, Sixteenth Edition 1993, Section M251-92, Level 1. *Other AASHTO grades are available. Please contact customer service for details.

AASHTO Unsupported Calendered Neoprene Bearing Pads Also available in 36” x 36” and 48” x 48” slabs. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness

Thickness

1/8 thru 1/2

Shore A ± 5

0 5 0 E0 0 5 2

0 6 0 E0 0 5 4

0 7 0 E0 0 5 6

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specification

36, 48

2250

400

–40ºF to +220ºF

2.54 lb

AASHTO Grade 3 Neoprene

1/8 thru 1/2

36, 48

2250

350

–40ºF to +220ºF

2.56 lb

AASHTO Grade 3 Neoprene

1/8 thru 1/2

36, 48

2250

300

–40ºF to +220ºF

2.60 lb

AASHTO Grade 2 Neoprene

inches

Width inches

Tensile

min. %

(1/8” x 36”)

AASHTO Unsupported Molded Neoprene Bearing Pads Also available in 36” and 48” width rolls. Thickness Tolerance: 1.25” thick or less = +0.125“/-0 Width Tolerance: 36” width = +0.25”/-0, 48” width = +0.5”/-0 Finish: Smooth Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote Durometer Hardness

Thickness inches

inches

1/4 thru 1

Shore A ± 5

050E0979

060E0986

070E0869

Estimated Weight Per Foot

min. psi

Ultimate Elongation

Temperature Range

36x36 48x48

2250

400

–40ºF to +220ºF

10.15 lb

AASHTO Grade 3 Neoprene

1/4 thru 1

36x36 48x48

2250

350

–40ºF to +220ºF

10.31 lb

AASHTO Grade 3 Neoprene

1/4 thru 1

36x36 48x48

2250

300

–40ºF to +220ºF

10.39 lb

AASHTO Grade 2 Neoprene

Size

Tensile

min. %

(1/2” x 36”)

Specification

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Fluorozone

Premium Performance FKM

Fluorozone® Premium Performance FKM sheet is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer. With 66% Fluorine content, Fluorozone® Premium Performance FKM is comparable to A-type Fluoroelastomer products. This material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber. Finish: Smooth (Nylon finish available, upcharge will apply) Color: Black Trim: Untrimmed Durometer Hardness

Ultimate Elongation (%)

Tensile (psi)

Temperature Range

Estimated Weight Per Foot

Compound

350

–20ºF to +400ºF

3.68 lb

060F0207

200

300

–20ºF to +400ºF

3.65 lb

075F0233

200

300

–20ºF to +400ºF

3.65 lb

075F0205

inches

Sheet Width inches

minimum

typical

minimum

typical

1/64 - 1/4

36, 48

800

1200

250

1/64 - 1/4

36, 48

900

1200

1/64 - 1/4

36, 48

1000

1250

Shore A ± 5

Thickness

(1/8” x 36”)

Fluorozone

Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.

Brown Premium Performance FKM

Fluorozone® Brown Premium Performance FKM sheet is made with 100% virgin USA-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone® Brown Premium Performance FKM exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. Fluorozone® has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber. Finish: Smooth (Nylon finish available, upcharge will apply) Color: Brown Trim: Untrimmed Durometer Hardness Shore A ± 5

Ultimate Elongation (%)

Tensile (psi)

inches

Sheet Width inches

minimum

typical

minimum

typical

1/64 - 1/4

36, 48

1000

1200

175

200

Thickness

Temperature Range

Estimated Weight Per Foot

–20ºF to +400ºF

4.40 lb

Compound

(1/8” x 36”)

075F0217

Fluorozone

Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.

Mil-Spec Performance FKM

Fluorozone® Mil-Spec Performance FKM sheet is formulated to meet the AMS 3216 specification (supercedes MIL-R-83248) and is made with 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). Fluorozone Mil-Spec Performance FKM is our second offering in the Fluorozone® FKM product family. This material exhibits a higher temperature range and increased tensile strength compared to our Fluorozone Premium Performance grade. Fluorozone has very good resistance to many aliphatic hydrocarbon fluids that can dissolve many other types of rubber and has resistance to a broad range of oils, fuels, lubricants and most mineral acids. Finish: Smooth (Nylon finish available, upcharge will apply) Durometer Hardness Shore A ± 5

075F0212

Tensile (psi)

Color: Black

Ultimate Elongation (%)

inches

Sheet Width inches

minimum

typical

minimum

typical

1/32 - 1/4

36, 48

1600

1850

125

150

Thickness

Trim: Untrimmed Temperature Range

Estimated Weight Per Foot

–20ºF to +500ºF

3.55 lb

Specifications

(1/8” x 36”)

AMS 3216G, MIL-R-83248C Type II Class 1

Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Fluorozone

FDA Performance FKM

Formulated for food and lab applications where FDA compliance is required. Made from FDA-approved ingredients per 21CFR 177.2600 including 100% virgin domestic-made premium 3M™ Dyneon™ Fluoroelastomer polymer (formerly known as Fluorel™). With 66% Fluorine content, this material exhibits resistance to a broad range of oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Finish: Smooth (Nylon finish available, upcharge will apply) Durometer Hardness

Tensile

(psi)

Color: Black

Trim: Untrimmed

Ultimate Elongation (%)

Temperature Range

Estimated Weight Per Foot

Compliance

inches

Sheet Width inches

minimum

typical

minimum

typical

1/32 - 1/4

36, 48

800

1200

200

250

–20ºF to +450ºF

3.76 lb

FDA 21 CFR 177.2600

1/32 - 1/4

36, 48

800

1300

150

200

–20ºF to +450ºF

3.92 lb

FDA 21 CFR 177.2600

Shore A ± 5

060F0221

075F0223

Thickness

(1/8” x 36”)

Tensile & Elongation physicals are presented in minimum and typical values - we certify to minimum value.

Commercial Viton® A

This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

1/32 thru 1/4

Shore A ± 5

070F0074

075F2124

inches

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

36, 48

800

175

–20ºF to +400ºF

3.7 lb

36, 48

1000

175

–20ºF to +400ºF

3.7 lb

Width inches

Tensile

min. %

Features

(1/8” x 36”)

66% Fluorine, Cinnamon Scented, 100% Viton® FKM

Brown Commercial Viton® A

This material exhibits a broad range of resistance to oils, fuels, lubricants and most mineral acids. It has very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set attributes even at temperatures that can embrittle other non-fluorinated elastomers. It also exhibits good resistance to atmospheric oxidation, sun, and weather, and has excellent resistance to fungus and mold. Finish: Smooth Color: Brown Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

1/32 thru 1/4

Shore A ± 5

075F0123

inches

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Features

1000

175

–20ºF to +400ºF

4.4 lb

100% DuPont Viton® FKM

Tensile

min. %

(1/8” x 36”)

Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Premium Viton® A

A broad range of resistance to oils, fuels, lubricants and most mineral acids. Very good resistance to many aliphatic hydrocarbon fluids that act as solvents for many other rubbers. Exceptionally good compression set resistance; even at temperatures that can degradate other non-fluorinated elastomers. Good resistance to atmospheric oxidation, sun, and weather. Excellent resistance to fungus and mold. 66% fluorine content. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

36, 48

1000

200

–20ºF to +450ºF

3.79 lb

ASTM D 2000 M1HK 607

1/32 - 1/4

36, 48

1000

175

–20ºF to +450ºF

3.58 lb

ASTM D 2000 M1HK 707

1/32 - 1/4

36, 48

1000

150

–20ºF to +450ºF

3.61 lb

ASTM D 2000 M1HK 807

Durometer Hardness

Thickness

1/16 - 1/4

Shore A ± 5

060F0053

070F0052

080F0054

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Specifications

Mil-Spec Viton® A

A broad range of resistance to oils, fuels, lubricants and most mineral acids. Excellent resistance to hot greases found in engines and compressors and excellent resistance to a wide range of concentrated acids. Made with 66% fluorine content. This material is approved under the Government’s Q.P.L. 83248-3. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5

075F0081

inches

Width inches

36, 48

Tensile min. psi

1600

Ultimate Elongation min. %

125

Temperature Range

Estimated Weight Per Foot

–20ºF to +500ºF

3.63 lb

Specifications

(1/8” x 36”)

AMS 3216G, MIL-R-83248C Type II Class 1

Viton® B

Viton® B has greater re sistan ce a n d retains flexibility better after dry heat aging than Viton® A. It is recommended for applications requiring maximum retention of elastic properties combined with good mechanical properties. Viton® B offers superior resistance to both diluted and concentrated aggressive acids. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum:Please call for minimums and availability. Durometer Hardness

Thickness

1/32 - 1/4

Shore A ± 5 0 7 0 F0 1 9 5

0 7 5 F0 1 6 5

inches

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1000

175

–20ºF to +450ºF

3.75 lb

ASTM D 2000 M1HK 707

36, 48

1000

150

–20ºF to +450ºF

3.81 lb

ASTM D 2000 M1HK 807 Z*

Width inches

Tensile

min. %

(1/8” x 36”)

*Z = 75 ± 5 Durometer

FDA Viton® A

Perfect for food and lab applications where FDA compliance is required. This material has good chemical resistance, high temperature properties and is resistant to corrosives. Safe to use for repeated food exposure. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

1/64 thru 1/4

Shore A ± 5

075F0151

Inches

Width Inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

700

150

–20ºF to +450ºF

3.63 lb

FDA approved ingredients per 21 CFR 177.2600

Tensile

min. %

(1/8” x 36”)

Viton™ and any associated logo is a trademark or copyright of THE CHEMOURS COMPANY FC, LLC used under license by West American Rubber Company, LLC.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Performance Silicone WARCO BILTRITE’s commercial grade silicone sheet is designed to be used in applications where physical properties are not critical but extreme temperature (high or low) resistance is still needed. This material also provides excellent UV and ozone resistance. It is non-toxic, chemically inert and fungus resistant. Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

inches

typical psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

1/32 thru 1/4

36, 48

750

450

–80ºF to +450ºF

2.36 lb

1/32 thru 1/4

36, 48

750

400

–80ºF to +450ºF

2.46 lb

1/32 thru 1/4

36, 48

800

350

–80ºF to +450ºF

2.63 lb

1/32 thru 1/4

36, 48

800

300

–80ºF to +450ºF

2.59 lb

1/32 thru 1/4

36, 48

800

200

–80ºF to +450ºF

--- lb

Shore A ± 5

040S 0842

050S0843 060S 0844

070S0845

080S 0846

Width

inches

Tensile

min. %

(1/8” x 36”)

Features

High and Low Temperature Resistance, Excellent Weathering Resistance

Spec-Grade Performance Silicone INFINISIL™ Spec-Grade Performance Silicone is designed to be used in applications where higher physical properties and lower compression set are required. It is resistant to extreme high and low temperature ranges and is proven to be an excellent gasketing material. Meets the A-A-59588 specification which supercedes ZZ-R-765. Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness Shore A ± 5

Thickness inches

Width inches

Tensile

(psi)

Ultimate Elongation (%)

min.

typical

min.

typical

Temperature Range

Estimated Weight Per Foot

Specifications

A-A-59588 2A & 2B Grade 40, AMS 3301, ASTM D2000 M1GE 405

(1/8” x 36”)

1/32 thru 1/4

36, 48

725

800

300

400

–80ºF to +450ºF

2.36 lb

1/32 thru 1/4

36, 48

725

820

250

300

–80ºF to +450ºF

2.42 lb

1/32 thru 1/4

36, 48

725

820

200

320

–80ºF to +450ºF

2.57 lb

1/32 thru 1/4

36, 48

725

900

150

280

–80ºF to +450ºF

2.59 lb

0 40S 0561

050S 0562 0 60S 0563

070S 0564

Tel: 714-532-3355

A-A-59588 2A & 2B Grade 50, AMS 3302, ASTM D2000 M1GE 505 A-A-59588 2A & 2B Grade 60, AMS 3303, ASTM D2000 M1GE 605 A-A-59588 2A & 2B Grade 70, AMS 3304, ASTM D2000 M1GE 705

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

FDA Performance Silicone This Silicone material is designed for applications where food or consumables are present. FDA Silicone is low volatile, peroxide-free and does not discolor over time. The ingredients used to make this product are listed in CFR 177.2600, an FDA regulation dealing with rubber articles that are intended for repeated food exposure. This material is ozone and UV resistant. Finish: Smooth Color: Red (Also available in Black, White, & Gray) Trim: Untrimmed Non-Stock Minimum: Please call for minimums and availability. Durometer Hardness

Thickness

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

1/32 thru 1/4

36, 48

450

300

–80ºF to +400ºF

2.18 lb

1/32 thru 1/4

36, 48

450

250

–80ºF to +400ºF

2.54 lb

1/32 thru 1/4

36, 48

450

200

–80ºF to +400ºF

2.67 lb

1/32 thru 1/4

36, 48

450

150

–80ºF to +400ºF

2.75 lb

1/32 thru 1/4

36, 48

450

100

–80ºF to +400ºF

2.77 lb

Shore A ± 5

0 4 0 S1 0 9 0

0 5 0 S1 0 9 1

0 6 0 S1 0 9 2

0 7 0 S1 0 9 3

0 8 0 S1 0 9 4

inches

Width inches

Tensile

min. %

Tel: 714-532-3355

Specifications

(1/8” x 36”)

FDA approved ingredients per 21 CFR 177.2600

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

(also known as Isobutylene-isoprene) is impermeable to air and used in many applications requiring airtight Butyl Butyl rubber. Butyl rubber has outstanding resistance to gases, vapors, heat aging, oxygen, ozone, sunlight, abrasion and tearing. It has excellent resistance to alkalis and acids and is good for electrical insulation. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

36, 48

1000

400

–40ºF to +180ºF

2.09 lb

ASTM D 2000 M1AA 407

1/32 thru 1/4

36, 48

1000

400

–40ºF to +180ºF

2.2 lb

ASTM D 2000 M1AA 507

1/32 thru 1/4

36, 48

1000

300

–40ºF to +180ºF

2.24 lb

ASTM D 2000 M1AA 607

1/32 thru 1/4

36, 48

1450

250

–40ºF to +180ºF

2.3 lb

ASTM D 2000 M1AA 710

Durometer Hardness

Thickness

1/32 thru 1/4

Shore A ± 5

040T0083

050T0055

060T0056

070T0080

inches

Width inches

Tensile

min. %

(1/8” x 36”)

Cloth-Inserted Neoprene - Regular Cotton Ply Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of cotton fabric for each 1/16” thickness. Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: Cotton Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

70*

1/16 thru 1/4

Shore A ± 5

0 7 0 E1 1 6 2

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Type

Estimated Weight Per Foot

Features

800*

150*

Cotton

2.41 lb

Cotton-Inserted Sheet

Tensile*

min. %

(1/8” x 36”)

*Physicals are based on rubber only (no insert). Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet. This construction includes one Cotton ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies

1/4” = 4 plies

Cloth-Inserted Neoprene - Regular Polyester Ply Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. This construction includes one ply of polyester fabric for each 1/16” thickness. Temperature Range: –30ºF to +200ºF Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: Polyester Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

70*

1/16 thru 1/4

Shore A ± 5

0 7 0 E1 0 2 8

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Weight

Fabric Type

Estimated Weight Per Foot

Features

800*

150*

4.0 oz

Polyester

2.34 lb

Polyester-Inserted Sheet

Tensile*

min. %

(1/8” x 36”)

*Physicals are based on rubber only (no insert). Durometer and tensile strength of the above material is calculated with the respective material inserted into the sheet. This construction includes one ply for each 1/16” thickness: 1/16 - 3/32 = 1 ply 1/8” = 2 plies 3/16” = 3 plies 1/4” = 4 plies

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Cloth-Inserted SBR - Regular Cotton Ply Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave cotton fabric. This construction includes one ply of cotton fabric for each 1/16” thickness. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

65*

1/16 thru 1/4

Shore A ± 5

06 5A04 47

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Type

Temperature Range*

Estimated Weight Per Foot

Features

1300*

300*

Cotton

–30ºF to +170ºF*

2.75 lb

Cotton-Inserted Sheet

Tensile*

min. %

*Physicals are based on rubber only (no insert). This construction includes one ply for each 1/16” thickness:

1/16 - 3/32 = 1 ply

(1/8” x 36”)

1/8” = 2 plies

3/16” = 3 plies

1/4” = 4 plies

Cloth-Inserted SBR - Regular Polyester Ply Cloth reinforcement enhances dimensional stability in flanged gasket applications with high compression loads. Suitable for use in air, hot water, low pressure steam, and hydraulic services. An SBR compound reinforced with a close weave polyester. This construction includes one ply of polyester fabric for each 1/16” thickness. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

65*

1/16 thru 1/4

Shore A ± 5

065A 0446

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Type

Temperature Range*

Estimated Weight Per Foot

Features

1300*

300*

4.0 oz Polyester

–30ºF to +170ºF*

2.74 lb

Polyester-Inserted Sheet

Tensile*

min. %

*Physicals are based on rubber only (no insert). This construction includes one ply for each 1/16” thickness:

1/16 - 3/32 = 1 ply

(1/8” x 36”)

1/8” = 2 plies

3/16” = 3 plies

1/4” = 4 plies

Cloth-Inserted SBR - Reduced Cotton Ply Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Cotton fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

65*

1/8 thru 1/4

Shore A ± 5

065A0447

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Type

Temperature Range

Estimated Weight Per Foot

Features

1300*

300*

Cotton

–30ºF to +170ºF

2.75 lb

Cotton-Inserted Sheet

Tensile*

min. %

*Physicals are based on rubber only (no insert). This construction includes the following fabric content per thickness:

1/8“ = 1 ply

(1/8” x 36”)

3/16” = 2 plies

1/4” = 3 plies

Cloth-Inserted SBR - Reduced Polyester Ply Like Regular Ply CI Sheet, reduced ply CI sheet addresses the need for dimensional stability in applications with high compression loads. Polyester fabric content per thickness is one ply for 1/8”, two plies for 3/16”, and three plies for 1/4”. Finish: Smooth Color: Black Trim: Untrimmed Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Durometer Hardness*

Thickness

65*

1/8 thru 1/4

Shore A ± 5

065A0446

inches

Width inches

36, 48

min. psi

Ultimate Elongation*

Fabric Type

Temperature Range

Estimated Weight Per Foot

Features

1300*

300*

4.0 oz Polyester

–30ºF to +170ºF

2.74 lb

Polyester-Inserted Sheet

Tensile*

min. %

*Physicals are based on rubber only (no insert). This construction includes the following fabric content per thickness:

1/8“ = 1 ply

Tel: 714-532-3355

(1/8” x 36”)

3/16” = 2 plies

1/4” = 3 plies

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

for ventilating systems and for HHP-151F Cloth-Inserted (CI) Sheet Designed flange joints for water or brine systems to withstand 250 pounds of pressure. A typical application is a flange gasket in which the compression loads are so high that non-reinforced rubber would squeeze or extrude out between the flanges. Finish: Smooth Color: Black Trim: Untrimmed Fabric Type: Cotton Non-Stock Minimum: 2 rolls (For 1 roll, please call for quote) Polymer

Class

Durometer Hardness*

Thickness

min. psi

Ultimate Elongation*

1/16 thru 1/4

36, 48

1500

250

-40ºF to +200ºF 10.8 oz

2.23 lb

n/a

1/16 thru 1/4

36, 48

1500

250

-40ºF to +220ºF 10.8 oz

2.73 lb

Medium

1/16 thru 1/4

36, 48

1500

250

-40ºF to +200ºF 10.8 oz

2.23 lb

n/a

1/16 thru 1/4

36, 48

1500

250

-40ºF to +250ºF 10.8 oz

2.40 lb

High

Shore A ± 5

SBR

Neoprene

SBR

Nitrile

050A0425

060E1395

050A0425

050P1016

Width

inches

Tensile*

inches

min. %

Temperature Range

Fabric Estimated Weight Oil Weight Per Linear Foot Resistance per sq yd (1/8” x 36”)

*Physicals are based on rubber only (no insert). This construction includes one 10.8 oz (per sq yd) cotton ply for each 1/16” thickness: 1/16” = 1 ply; 1/8” = 2 ply; 3/16” = 3 ply; 1/4” = 4 ply

General Purpose Grade TPE - Black

A family of both soft and hard, black, versatile thermoplastic. This material combines good physical properties and chemical resistance for use in a wide range of applications. Specified for its performance properties in a variety of industries: major appliances, caster wheels, mass transit, safety & protection, marine and industrial machinery. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote Ultimate Tensile* Elongation* psi %

Durometer Hardness

Durometer Type

Thickness

Temperature Range

Estimated Weight Per Foot

Specifications

0.02 thru 0.25

640

330

–50ºF to +275ºF

1.27 lb

MSAR20A

0.02 thru 0.25

1000

440

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1200

375

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1600

450

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2300

550

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2750

600

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

4000

600

–50ºF to +275ºF

1.27 lb

Shore ± 5

1 0 1 M0 0 5 5 1 0 1 M0 0 6 4 1 0 1 M0 0 7 3 1 0 1 M0 0 8 0 1 0 1 M0 0 8 7 1 0 3 M0 0 4 0 1 0 3 M0 0 5 0

inches

Width inches

(1/8” x 24”)

*Typical Values

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

family of soft, as well as hard, colorable, General Purpose Grade TPE - Neutral Aversatile thermoplastic. This material combines good physical properties and chemical resistance for use in a wide range of applications. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote Temperature Range

Estimated Weight Per Foot

Specifications

psi

Ultimate Elongation*

640

330

–50ºF to +275ºF

1.27 lb

-----

0.02 thru 0.25

1000

440

–50ºF to +275ºF

1.27 lb

MSAR20B, WSD-M2D379-A1, GMP.E/P.002

0.02 thru 0.25

1200

375

–50ºF to +275ºF

1.27 lb

MSAR20C, WSD-M2D380-A1, GMP.E/P.003

0.02 thru 0.25

1600

450

–50ºF to +275ºF

1.27 lb

MSAR20D, WSD-M2D381-A1, GMP.E/P.004

0.02 thru 0.25

2300

550

–50ºF to +275ºF

1.27 lb

MSAR20E, WSD-M2D382-A1, GMP.E/P.005

0.02 thru 0.25

2750

600

–50ºF to +275ºF

1.27 lb

MSAR30A, WSD-M2D441-A, GMP.E/P.006

0.02 thru 0.25

4000

600

–50ºF to +275ºF

1.27 lb

MSAR30B, WSD-M2D712-A1, GMP.E/P.007

Durometer Hardness

Durometer Type

Thickness

0.02 thru 0.25

Shore ± 5

201M 0055

201M 0064

201M 0073

201M 0080

201M 0087

203M 0040

203M 0050

inches

Width inches

Tensile*

(1/8” x 24”)

DaimlerChrysler, Ford Worldwide, General Motors

*Typical Values

with NSF 61 for plumbing NSF 51 & NSF 61 Approved Grade TPE Complies applications in contact with potable

water and NSF 51 for food processing equipment. Complies with FDA regulations for rubber articles intended for repeated use, as well as those in contact with non-fatty, non-oily foods as closures and sealing gaskets. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote psi

Ultimate Elongation*

Temperature Range

Estimated Weight Per Foot

640

330

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1000

440

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1200

460

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1600

500

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2300

500

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2750

550

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2700

550

–50ºF to +275ºF

1.27 lb

Durometer Hardness

Durometer Type

Thickness

0.02 thru 0.25

Shore ± 5

241M 0055

241M 0064

241M 0073

241M 0080

241M 0087

243M 0040

243M 0050

inches

Width inches

Tensile*

Specifications

(1/8” x 24”)

NSF 51 Approved, NSF 61 Approved

*Typical Values

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

hard, colorable, flame retardant material. It exhibits good fluid Flame Retardant Grade TPE Aresistance and contains non-ether brominated flame retardants (non-furan emitting). It does not contain added antioxidants or metal deactivators. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote psi

Ultimate Elongation*

Temperature Range

Estimated Weight Per Foot

Specifications

1050

410

–50ºF to +275ºF

1.27 lb

MSAR40A

0.02 thru 0.25

1480

445

–50ºF to +275ºF

1.27 lb

MSAR40B

0.02 thru 0.25

2020

530

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1700

490

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

3720

660

–50ºF to +275ºF

1.27 lb

Durometer Hardness

Durometer Type

Thickness

0.02 thru 0.25

Shore ± 5

251M 0080

251M 0085

251M 0092

253M 0036

253M 0050

inches

Width inches

Tensile*

(1/8” x 24”)

*Typical Values

(thermoplastic elastomers) have the FDA Approved Grade TPE - Black TPEs properties and performance of rubber, but are processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Black Trim: Trimmed Minimum: Please call for quote psi

Ultimate Elongation*

Temperature Range

Estimated Weight Per Foot

640

330

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1000

440

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1200

460

–50ºF to +275ºF

1.27 lb

Durometer Hardness

Durometer Type

Thickness

0.02 thru 0.25

Shore ± 5

171M0055

171M0064

171M0073

inches

Width inches

Tensile*

Features

(1/8” x 24”)

FDA approved ingredients per 21 CFR 177.2600

*Typical Values

(thermoplastic elastomers) have the FDA Approved Grade TPE - Neutral TPEs properties and performance of rubber, but are processed like plastic. It has excellent clarity & superior colorability, and very good heat resistance. It was designed for applications where FDA compliance, clarity & enhanced heat resistance are required. Safe to use for repeated food exposure. Finish: Smooth Color: Neutral Trim: Trimmed Minimum: Please call for quote psi

Ultimate Elongation*

Temperature Range

Estimated Weight Per Foot

640

330

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1000

440

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1200

460

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

1600

500

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2300

500

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

2750

550

–50ºF to +275ºF

1.27 lb

0.02 thru 0.25

4000

550

–50ºF to +275ºF

1.27 lb

Durometer Hardness

Durometer Type

Thickness

0.02 thru 0.25

Shore ± 5

271M0055

271M0064

271M0073

271M0080

271M0087

273M0040

273M0050

Inches

Width Inches

Tensile*

Specifications

(1/8” x 24”)

FDA approved ingredients per 21 CFR 177.2600

*Typical Values

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Corrugated Matting Most widely used where floor protection and safety are vitally important. Applications include general use in industry, home and office for heavy traffic areas, aisles, hard floor surfaces or as anti-fatigue matting. Use thicker matting for extra heavy duty service. Product strengths include extended wear, all-weather, strong sound absorption characteristics, cleanability and wear resistance. Will not curl, shrink, or separate. This product can be easily beveled and perforated for entry mat use. Finish: Corrugated Texture Color: Black Trim: Trimmed Non-Stock Minimum: Please call for quote Color

Thickness inches

Width inches

Approximate Roll Length

Approximate Weight Per Foot

Surface Texture

Specifications

(12” x 36”)

Black

1/8

24, 36, 48, 72

Half = 75 feet Full = 150 feet

2.1 lb

Corrugated

ASTM D 2000 1AA 706

Black

3/16

36, 48, 72

75 feet

3.7 lb

Corrugated

ASTM D 2000 1AA 706

Black

1/4

24, 36, 48, 72

75 feet 72” = 36 feet

5 lb

Corrugated

ASTM D 2000 1AA 706

Black

3/8

18 feet

7.4 lb

Corrugated

ASTM D 2000 1AA 706

ASTM Switchboard Type 1 Matting Expressly designed to protect against electrical shock when working around high voltage apparatus such as fuse boxes, control panels, and electrical machinery, when used as specified by ASTM D178-93, as amended. Proof tested at 20,000 volts AC. Maximum recommended use voltage is 17,000 volts. Dielectric strength 30,000 volts AC. Permanently branded. Please refer to specifications for additional information. Finish: Corrugated Texture Color: Black Trim: Trimmed Color

Black

Thickness inches

1/4

inches

Approximate Roll Length

Approximate Weight Per Foot

Surface Texture

Specifications

24, 36, 48

75 feet

5 lb*

Corrugated

ASTM D 178-93 Type 1 Class 2

Width

(12” x 36”)

*Conforms to OSHA Regulations. Ref. 29 CFR 1920.137 & 29 CFR 1910.309(b)

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

KleenRite® Matting KleenRite® matting is ideally suited for tool box lining, utility vehicles, step stools and a myriad of other applications. Finish: KleenRite Texture Color: Black Trim: Trimmed Color

Black

Thickness inches

0.08

Width inches

36, 48

Approximate Roll Length

Approximate Weight Per Foot

Half = 75 feet Full = 150 feet

1.6 lb

Surface Texture

(12” x 36”)

Specifications

Non-Directional, Textured Finish

ASTM D 2000 1AA 704

FingerTrac Entrance Mats Stop dirt at the door with WARCO BILTRITE's FingerTrac Entrance Mats. WARCO BILTRITE provides high quality FingerTrac Rubber Entrance Mats made in the USA designed to maintain cleanliness and to help protect and extend flooring life. Perfectly suited for outdoor or indoor entrances and specifically designed to clean and scrape shoe soles of any dirt, sand, grit, mud and snow - eliminating ugly tracking problems in office buildings, retail establishments and homes, resulting in reduced costs on floor and carpet maintenance issues. All weather high performance mat

Full 1/8" fingerbed thickness

Designed with thousands of flexible tapered vertical rubber fingers that scrape shoe soles clean and a thicker base that provides more flexing and longer wear

Beveled edges on all four sides enhance safety while trapping dirt and other elements

Contains 30% more fingers and is 25% heavier on average than the imports

Utilize the FingerTrac superior construction by placing at workstations as anti-fatigue mats

Easy to clean

Tredair Anti-Fatigue Comfort Mats The ultimate in comfort with honeycombed air cells providing resilience while creating long-lasting foot and leg comfort that decreases back fatigue. Greater comfort translates into increased productivity and wellness. Interlocking and beveled edge design allows flexibility to form any length. Black in Color

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

60 Durometer Neoprene Tubing WARCO BILTRITE’s 60 Durometer Neoprene Tubing is Anti-Fungal per Mil-Std-8.10 and is designed to meet the Mil-R-6855 Class 2 specification. Compression Set = 50% max. Material is supplied unmarked. For markings, please contact us. Color: Black Stock-Item Purchase Minimum: 10 Feet Non-Stock Purchase Minimum: Please call for quote Durometer Hardness

Inner Diameter Range

Wall Thickness Range

Tensile min. psi

Ultimate Elongation

Temperature Range

1/16 thru 5

1/32 thru 1

1500

300

–50ºF to +220ºF

Shore A ± 5

060E 0713

inches

min. %

The following sizes are stock items:

Specifications

1 /1 6 ” (± 0.009) Wall Thickness

3/8” ID

060E 0713

$0.75

31265091

(± 0.010)

1/2” ID

$0.90

5/16”

(± 0.010)

(± 0.011)

(± 0.013)

(± 0.016)

1/16” Wall

(± 0.009)

Inne r D i a m e te r ( in c h e s )

5/16” ID

31267792

(± 0.011)

$0.97

3/8”

31267793

(± 0.013)

1/2”

$1.28

31265092

(± 0.016)

9/16”

$1.45

31265093

(± 0.017)

5/8”

$1.63

(± 0.018)

31265094

21/32”

$1.76

31267794

(± 0.019)

9/16” ID

5/8” ID

21/32” ID

3/4” ID

(± 0.017)

(± 0.018)

(± 0.019)

(± 0.021)

1/16” Wall

(± 0.009)

D uro m e te r H a rd ne s s ( S ho re A ± 5)

60 Duro

1/4”

1/4” ID

Anti-Fungal Per Mil-Std-8.10, ASTM G21, Mil-Std-454 Req 4, Mil-R-6855 Class 2 Type A/B Grade 60

$2.16

3/4”

31265095

(± 0.021)

Prices are per foot ($/ft). $10.00 Min. = Regularly Stocked Items.

Please contact us for stencilling, other dimensions, profiles or polymers and for orders over $500.00 Call 714-532-3355 or email sales@warco.com

Neoprene Cable Jacket Tubing to Mil-R-6855 Class 2 Type A/B Grade 60 Protects wires and cables from abrasion, corrosion and the elements. Designed to fit loose or be blown on to wire bundles for a tight fit. WARCO BILTRITE carries compound in stock for a shorter production lead time. Color: Black Purchase Minimum: $500.00 per line item Durometer Hardness

Inner Diameter Range

Wall Thickness Range

Tensile min. psi

Ultimate Elongation

Temperature Range

1/16 thru 5

1/32 thru 1

1500

300

–50ºF to +220ºF

Shore A ± 5

0 6 0 E0 0 5 5

inches

min. %

Specifications

Mil-R-6855 Class 2 Type A/B Grade 60

Catalog Pricing is available on the following pages for the Wall Thicknesses below:

1/32” Wall

3/64” Wall

1/16” Wall

3/32” Wall

Tel: 714-532-3355

1/8” Wall

5/32” Wall

Contact Customer Service

Toll-Free: 800-245-8748

3/16” Wall

Email: sales@warco.com

Utility Tarp Straps

Single piece molded construction ensures exceptional strength and stretch resiliency. The special EPDM compound used in the construction of WARCO BILTRITE Utility Straps is suited for high oxidation and weather resistance without cracking. An assortment of lengths including 6 in, 10 in, 15 in, 15 in, 21 in, 31 in are available.

Rubber Waterstop has been used extensively on projects throughout the United States and the world. Beginning with projects designed to meet the U.S. Army Corps. of Engineers’ and the U.S. Bureau of Reclamation’s specifications, Rubber Waterstop usage has expanded to all types of concrete structures for the purpose of keeping liquids in or out. SBR Rubber is used primarily for water containment, while Neoprene Rubber is used generally for projects involving sewage, water treatment, and chemical environments. Waterstops are also available in other polymers such as EPDM, Nitrile, Silicone, and Natural Rubber. WARCO BILTRITE maintain Waterstop compounds that meet the U.S. Army Corps of Engineers’ CRD-C-513-71 specification and Caltrans 51-2.04 specification. Other compounds can be provided to meet other national and international specifications in accordance with project requirements. Non-specification commercial grade Rubber Waterstop is also available. Please contact us for details.

Rubber Waterstop

Physical Properties Chart of Various Polymers ASTM Test Methods

SBR (Styrene Butadien)

Natural Rubber

High Tensile Neoprene*

Tensile Strength PSI (min)

D412

3000

3500

2500

Tensile Strength @ 300% Modulus (PSI min)

D412

1150

1450

1150

Ultimate Elongation, (% min)

D412

450

500

450

Durometer, Shore A (+/- 5)

D2240

80 80

no cracks

Water Absorption, 2 Days at 5 D471 70C % Weight Change (% max) Compression Set, 22 hrs. @ 70C D395 30 % of original deflection (max) (Method B) Accelerated Aging, 96 hrs. @70C 80 % of Tensile Strength before aging (min) D573 80 % of Elongation before aging (min) D573 Ozone Resistance, 7 Days at 50 PPHM no cracks D1149 @ 38C, 20 % Elongation *Provides Maximum Resistance to Ozone, Sewage, Oil, and Solvents

Caltrans Strip Waterstop Finish: Smooth

Color: Black

Durometer Hardness

Thickness

1/8 thru 1/2

Shore A ± 5

055E0507

inches

Width inches

36, 48

min. psi

Ultimate Elongation

Temperature Range

Estimated Weight Per Foot

Specifications

2000

300

–40ºF to +220ºF

2.56 lb

Caltrans 51-2.04 Waterstops

Tensile

min. %

Tel: 714-532-3355

(1/8” x 36”)

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Waterstop Extruded Profile Chart The profiles below are normally provided in SBR and Neoprene compounds as required. Waterstop is usually provided in 50 ft. lengths, but can be manufactured in longer and shorter lengths to minimize field splicing. Special profiles and compounds can be provided to meet specific project requirements. WARCO BILTRITE Rubber Waterstop is also available in non-spec commercial grade.

Profiles

Normal Size (Width x Thickness x Bulb O.D.)

Polymer

Weight Per 100 Feet

Dumbbell Type

Neoprene

160 lb

152.4mm x 9.5mm x 19mm end bulbs

SBR

130 lb

Dumbbell Type

Neoprene

230 lb

228.6mm x 9.5mm x 19mm end bulbs

SBR

190 lb

Neoprene

125 lb

152.4mm x 6.3mm x 15.9mm end bulbs (28.6mm center bulb)

SBR

105 lb

Center Bulb Type

Neoprene

300 lb

228.6mm x 9.5mm x 25.4mm end bulbs (38mm center bulb)

SBR

250 lb

6” x 3/8” x 3/4” end bulbs

9” x 3/8“ x 3/4” end bulbs

Center Bulb Type 6” x 1/4“ x 5/8” end bulbs (1 1/8” center bulb)

9” x 3/8“ x 1” end bulbs (1 1/2” center bulb)

Waterstop Molded Intersections Utilize the Molded Waterstop Intersections below in conjunction with WARCO BILTRITE’s Extruded Waterstop profiles above to create custom systems that fit a multitude of applications.

TYPE

6“

9“

6“

9“

C 6” DBU

C 9” DBU

C 6” DBCBU

C 9” DBCBU

Flat Cross

C 6” DBFC

C 9” DBFC

C 6” DBCBFC

C 9” DBCBFC

Flat Tee

C 6” DBFT

C 9” DBFT

C 6” DBCBFT

C 9” DBCBFT

Flat Ell

C 6” DBFE

C 9” DBFE

C 6” DBCBFE

C 9” DBCBFE

Vertical Tee

C 6” DBVT

C 9” DBVT

C 6” DBCBVT

C 9” DBCBVT

Vertical Ell

C 6” DBVE

C 9” DBVE

C 6” DBCBVE

C 9” DBCBVE

Union

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Notes

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

Index

For more information, please visit us at warco.com

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Production Information . . . . . . . . . . . . . . . . . . . . 3 Specification Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Buy The Foot Parts Index .............................6 Neoprene Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 BLACKOUT Commercial Neoprene . . . . . . . . . . . . . . . . . . 8 Commercial Neoprene - Style 10 . . . . . . . . . . . . . . . . . . . . 8 Matte Finish Neoprene - Style 12 . . . . . . . . . . . . . . . . . . . . 9 Mid-Grade Neoprene - 5100 Series . . . . . . . . . . . . . . . . . . 9 Premium Neoprene (100% Neoprene) . . . . . . . . . . . . . . 10 FDA Neoprene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Neoprene Performance Molded Sheets . . . . . . . . . . . . . . 10 ASTM D 2000 M2BC (Neoprene) . . . . . . . . . . . . . . . . . . . 11 MIL-R-6855 Class 2 (A&B) - Oil Resistant Neoprene . . . . . 11 MIL-R-3065 SC (Neoprene) . . . . . . . . . . . . . . . . . . . . . . . . 11 Aerospace Material Specification (Neoprene/Nitrile) . . . 12 Anti-Microbial Neoprene . . . . . . . . . . . . . . . . . . . . . . . . . 12 Low Smoke, Low Flame, Low Toxicity Neoprene . . . . . . . 12 Nitrile (Buna-N) Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . Commercial Nitrile - Style 35 . . . . . . . . . . . . . . . . . . . . . . Premium Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FDA Nitrile - Style 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . WARCO White® FDA Nitrile . . . . . . . . . . . . . . . . . . . . . . . MIL-R-6855 Class 1 (Fuel Resistant Nitrile) . . . . . . . . . . . . MIL-R-3065 SB (Nitrile) . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D 2000 M5BG (Nitrile) . . . . . . . . . . . . . . . . . . . . . . MIL-G-1149 (Neoprene/SBR/Nitrile). . . . . . . . . . . . . . . . . MIL-R-2765 (Nitrile) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transformer Oil Material . . . . . . . . . . . . . . . . . . . . . . . . . Bio-Diesel Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13 13 13 13 14 14 14 15 15 15 15 16

SBR Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Red Rubber SBR - Style 20 . . . . . . . . . . . . . . . . . . . . . . . . Specification Grade SBR . . . . . . . . . . . . . . . . . . . . . . . . . . Premium SBR - Style 22 . . . . . . . . . . . . . . . . . . . . . . . . . .

16 16 16 16

Natural Rubber Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . Natural Rubber - Style 28 . . . . . . . . . . . . . . . . . . . . . . . . . Black Natural Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pure Gum Floating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . EZ Cut Non-Floating Gum . . . . . . . . . . . . . . . . . . . . . . . . Protein Free (Synthetic Polyisoprene) . . . . . . . . . . . . . . . Tuff-Stuff® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17 17 17 17 18 18 18

EPDM Sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Commercial EPDM - Style 40 . . . . . . . . . . . . . . . . . . . . . . Premium EPDM - Style 45. . . . . . . . . . . . . . . . . . . . . . . . . Premium EPDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Peroxide Cure EPDM . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-R-21252 (EPDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . MIL-R-83285 GR80 (EPDM) . . . . . . . . . . . . . . . . . . . . . . . . MIL-R-900 (EPDM). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ASTM D 2000 M4AA (EPDM) . . . . . . . . . . . . . . . . . . . . . .

18 18 19 19 20 20 20 20 21

Skirtboard & Chute Lining . . . . . . . . . . . . . . . . . . . . . . . . 21

AASHTO Bearing Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . AASHTO Unsupported Neoprene Bearing Pads - Style 71 . . . . . . . . . . . . . . . . . . . . . . . . . AASHTO Unsupported Natural Rubber Bearing Pads - Style 72 . . . . . . . . . . . . . . . . . . . . . . . . . AASHTO Unsupported Calendered Neoprene Bearing Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AASHTO Unsupported Molded Neoprene Bearing Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Viton® & Fluoroelastomer Sheet . . . . . . . . . . . . . . . . . . . Fluorozone® Premium Performance FKM . . . . . . . . . . . . Fluorozone® Brown Premium Performance FKM . . . . . . Fluorozone® Mil-Spec Performance FKM . . . . . . . . . . . . Fluorozone® FDA Performance FKM . . . . . . . . . . . . . . . . Commercial Viton™ A . . . . . . . . . . . . . . . . . . . . . . . . . . . Brown Commercial Viton™ A . . . . . . . . . . . . . . . . . . . . . . Premium Viton™ A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mil-Spec Viton™ A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Premium Viton™ B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FDA Viton™ A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

23 23 23 23 24 24 24 25 25 25 25

Silicone Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INFINISIL™ Performance Silicone. . . . . . . . . . . . . . . . . . . INFINISIL™ Spec-Grade Performance Silicone . . . . . . . . . INFINISIL™FDA Performance Silicone . . . . . . . . . . . . . . .

26 26 26 27

21 22 22 22

Butyl Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Cloth-Inserted (CI) Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . Cloth-Inserted Neoprene - Regular Cotton Ply . . . . . . . . Cloth-Inserted Neoprene - Regular Polyester Ply . . . . . . Cloth-Inserted SBR - Regular Cotton Ply . . . . . . . . . . . . . Cloth-Inserted SBR - Regular Polyester Ply . . . . . . . . . . . Cloth-Inserted SBR - Reduced Cotton Ply . . . . . . . . . . . . Cloth-Inserted SBR - Reduced Polyester Ply. . . . . . . . . . . HHP-151F Cloth-Inserted Sheet . . . . . . . . . . . . . . . . . . . .

28 28 28 29 29 29 29 30

Thermoplastic Elastomer Sheet . . . . . . . . . . General Purpose Grade TPE - Black . . . . . . . General Purpose Grade TPE - Neutral . . . . . NSF 61 Approved Grade TPE . . . . . . . . . . . . Flame Retardant Grade TPE . . . . . . . . . . . . . FDA Approved Grade TPE (Black) . . . . . . . . . FDA Approved Grade TPE (Neutral) . . . . . . .

.......... .......... .......... .......... .......... .......... ..........

30 30 31 31 32 32 32

Rubber Mats & Matting . . . . . . . . . . . . . . . . . Corrugated Matting . . . . . . . . . . . . . . . . . . . ASTM Switchboard Type 1 Matting . . . . . . . KleenRite® Matting. . . . . . . . . . . . . . . . . . . . FingerTrac® Entrance Mats . . . . . . . . . . . . . . Tredair® Comfort Mats . . . . . . . . . . . . . . . . .

.......... .......... .......... .......... .......... ..........

33 33 33 34 34 34

Rubber Extrusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 60 Durometer Neoprene Tubing . . . . . . . . . . . . . . . . . . . 35 Neoprene Cable Jacket Tubing to MIL-R-6855 . . . . . . . . 35 Utility Tarp Straps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Rubber Waterstop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 TERMS AND CONDITIONS OF SALE . . . . . . . . . . . . . . . . . 40

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

STANDARD TERMS AND CONDITIONS OF SALE Industrial Rubber Products

WARCO BILTRITE products are sold commercially for multiple applications as determined 9. LIMITATION OF LIABILITY: Seller shall not be liable in contract, in tort (including by the end-user. Information on certain physical properties of our various styles and grades negligence),or otherwise for damage or loss of other property, loss of profits or revenue, is provided in our product literature, but such information is unrelated to any particular use loss of use of property or equipment, claims of customers of the Buyer, or for any special, or application. Determination of the suitability of the goods for the uses and applications indirect, incidental, or consequential damages whatsoever. Under no circumstances shall contemplated by Buyer and others shall be the sole responsibility of the Buyer or user. Seller’s liability exceed the purchase price of the goods in respect of which damages are Consultation with qualified engineers and testing laboratories is recommended. WARCO claimed. BILTRITE does not recommend any of its products for any particular use or application. The 10. PRODUCTS SUITABILITY AND LENGTH OF SERVICE: Determination of the purchaser or user shall assume full responsibility for the adequacy and suitability for the suitability of the goods for the uses and applications contemplated by Buyer and others intended use. Rubber products may fail as a result of temperature variances, excessive shall be the sole responsibility of the Buyer or user. No guaranty is given with respect to pressures, abrasion or damaging substances. The wear life of rubber products is limited by length of service on any particular application. Suggestions or recommendations made by the circumstances and conditions of use. Rubber materials should be inspected regularly Seller in its product literature concerning uses or applications of the goods are believed to and should be replaced as appropriate for operational and safety requirements and the be reliable, but Seller makes no warranty or guaranty of results to be obtained since the prevention of injury or damage to persons and property. conditions of the use and application by Buyer and others are beyond Seller’s control. Our rubber products, except where indicated, are a proprietary blend of various polymers 11. FORCE MAJEURE: Seller shall not be liable for failure to perform or for delay in formulated to meet stated physicals and specifications. The named polymer is not performance due to fire, flood, strike or other labor difficulty (Seller shall not be required to necessarily the polymer representing the highest percentage of the polymer blend. The settle any labor matter against its own best judgment), act of God, act of any government various specification call outs are a valuable guide in selecting the type and grade of sheet authority, acts or omissions of the Buyer, riot, embargo, explosion, accident, breakdown of rubber for a particular application. In any application, the customer should evaluate the machinery or equipment, shortage of or inability to obtain fuel, power, raw materials, performance requirements and conditions that will affect the working life of the rubber equipment, transportation of the product at usual prices or usual sources, or due to any product. Field should be performed before the type of rubber is selected. If the customer’s other cause beyond its reasonable control. Quantities so affected by such circumstances quality assurance incorporates the testing of rubber material, the test criteria should include may be eliminated without liability, but this Agreement shall otherwise remain unaffected. the physical property call outs of the specifications that are most critical to its application. Polymer type alone may not be adequate for the selecting of the rubber that is best 12. RETURNED GOODS: No goods may be returned without Seller’s prior written suited for a specific application. authorization. Each request for exchange or return shall describe the condition of the goods and the reasons for the requested return or exchange. If the Seller agrees to accept a return ASTM basic requirements for physical properties are based on values obtained from or exchange, the Buyer shall pay return transportation cost and a restocking charge; the standard laboratory test specimens prepared and tested in accordance with the applicable restocking charge will be determined based upon the Seller’s ability to resell the exchanged ASTM test methods. Test results from specimens prepared from finished products may not or returned material and the reason for the return. duplicate values obtained from standard test specimens. Per ASTM D2000, Section 7.1, Buyer agrees that when standard test specimens are cut from finished parts in accordance 13. QUANTITY VARIANCE: Due to manufacturing variances, the quantity of goods with Practice D 3183, a deviation to the extent of 10% on tensile strength and elongation delivered will be within 10%, more or less, of the quantity specified and shall be charged at values is permissible. the unit price herein. Unless stated otherwise, products are manufactured to meet standard RMA Commercial 14. ENTIRE AGREEMENT: This Agreement constitutes the complete and final Agreement guidelines. Per RMA, roll goods may contain multiple pieces. of sale and purchase of the goods specified herein and supersedes all prior contracts and discussions. No modification hereof shall be effected by the use of purchase order, 1. PAYMENTS: Seller may require full or partial payment in advance at any time if in its sole acknowledgment, acceptance, or other forms at variance with or in addition to the terms judgment, the financial condition of the Buyer does not justify the terms of payment and conditions contained herein. No modification shall be effected in any manner other than specified herein. A charge of 1-1/2 percent (1-1/2%) per month (or at the highest rate in writing and signed by the party claimed to be bound thereby. permitted by law) shall be payable on all overdue accounts. Orders will not be processed until payment terms are approved by Seller’s Credit Department. 15. GOVERNING LAW: This contract shall be governed by and construed under the laws of the State of California. 2. PRICES SUBJECT TO CHANGE: Seller may change any price, shipment or freight term in effect at any time and from time to time by giving Buyer at least fifteen (15) days written 16. TRANSPORTATION POLICY: All deliveries will be made F.O.B. Point of Shipment, notice thereof. Buyer’s failure to give Seller a written objection to any such change within freight calculated and billed when releases for shipment are below the stated freight ten (10) days after receipt of notice shall constitute acceptance of such change. Where allowances for the product ordered, released and shipped. For specific freight allowances objection is made, Seller shall advise Buyer within ten (10) days thereafter whether Seller please refer to catalog sections for products ordered. Freight prepaid and allowed by most will (a) continue to deliver at the price or on the terms in effect prior to the announced economical routing on shipments weighing 3,000 lbs or more to one destination, from one change, or (b) cancel this contract. Any cancellation shall be effective upon Buyer’s receipt location, one shipment, one purchase order, within the continental United States. Applicable of Seller’s notice and shall be without further obligation of either party to the other except to surcharges and/or accessorial charges are not covered and will be billed accordingly. perform or pay all obligations accrued through date of cancellation. Provided however, that Freight allowance applies to roll goods of WARCO calendered Sheet products and Biltrite in the case of non-stock items ordered specifically for Buyer’s use, Seller reserves the right Sheet & Matting products only. Does not apply to "Buy the Foot" items or extruded, molded, to increase prices to cover the increases in its costs arising from increases in the cost of and spliced products. Orders including both stock and made-to-order items will not be materials or labor rates which become effective between the date of this acknowledgment combined for weight unless the stock items are stocked at the manufacturing plant and the date of shipment. In such event, this Agreement shall remain in effect at the price producing the made-to-order items and the customer is willing to wait for shipment at one adjusted to reflect said increases. time to one destination. All price page and catalog weights are approximate and actual shipping weights may vary from these listings. In case of dispute, actual shipping weights 3. MINIMUM PURCHASE: Stock sheet Item = One roll minimum. will apply. Origin, Method of Shipping and Routing: Seller will determine the point of Non-stock sheet and Custom items = Please request quote. origin of shipment, the method of transportation and the routing of shipment. Purchasers 4. TAXES: Buyer shall reimburse Seller for all taxes, excises or other charges which Seller requiring shipment by a method or routing other than that will be billed any excess or may be required to pay to any governmental entity (national, state or local) upon the sales, premium in transportation charges. If Seller elects to ship by other than common carrier, production or transportation of the goods sold hereunder. the full transportation charges will be prepaid and any freight charges billable (under allowances) will be calculated and billed. Purchaser Pick Up: No allowance will be made 5. DELIVERY: Unless otherwise specified herein, goods will be delivered F.O.B. point of in lieu of transportation if the buyer accepts shipment at the factory or the warehouse or shipment, freight allowed on specified pounds. Seller will determine the point of origin of freight station. Transportation charges will not be deducted from the selling price. shipment, the method of transportation, and the routing of shipment. Partial deliveries shall be accepted by the Buyer and paid for at the prices and terms hereunder. Seller does not 17. CONCEALED DAMAGE: Seller will not participate in any settlement of claims for guarantee any delivery or completion date. In the event of delay in delivery of goods, Seller concealed damage. Upon receipt of any shipment, Buyer must unpack immediately and, if shall not be liable or responsible for any loss, damage, expense or charge of any kind, damage is discovered, must: direct or indirect, suffered or incurred by Buyer as a result of such delay. • Not move the product from the point of examination • Retain shipping container and packing material 6. TITLE AND RISK OF LOSS: Title and risk of loss in the goods shall pass to Buyer upon • Notify the carrier’s agent to make an inspection and confirm in writing Seller’s delivery to carrier at the shipping point, notwithstanding the terms of shipment • Send Seller a copy of the carrier’s inspection report specified herein. • Make a claim for damage with the carrier 7. WARRANTIES AND DISCLAIMERS: Goods furnished under this Agreement shall • Recovery for any damage to merchandise incurred during shipping shall be the sole conform to the description herein. All first quality goods are warranted to be free from responsibility of Buyer. Any such damage shall not defeat or otherwise affect the defects in material and workmanship at the time of shipment. Seller shall convey good title obligation of Buyer to pay all amounts due Seller with respect to the damaged goods. to buyer. Seller further warrants that the goods sold hereunder do not infringe any valid 18. CANCELLATION: Requests for cancellation or modification of orders must be United States patent, but Seller does not warrant, however, that the use of the goods or submitted in writing and received by Seller at least 2 days prior to shipment. Any products made therefrom, either alone or in conjunction with other materials, will not cancellation or modification will be effective only when acknowledged in writing by Seller infringe any valid United States patent. THE WARRANTIES SET FORTH IN THIS and can be made subject to status of production of goods. Orders for merchandise PROVISION ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES produced specifically for a customer cannot be canceled once goods are produced. EXPRESSED OR IMPLIED, INCLUDING WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. SELLER MAKES NO WARRANTY, EXPRESSED OR 19. ACCEPTANCE OF ORDERS: Issuance of any Catalog or Price List does not constitute IMPLIED, OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. an offer for the sale of any products described therein. All orders are subject to the ALL PRODUCTS ARE SOLD AND WARRANTED ONLY PURSUANT TO OUR acceptance of Seller. All orders accepted by Seller are accepted on the understanding that PUBLISHED TERMS AND CONDITIONS OF SALE. WE ARE NOT RESPONSIBLE TO Buyer, by placing the order, has agreed to these Standard Terms & Conditions of Sale and THE USER FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES that they are therefore part of the Buyer's order. RESULTING FROM PRODUCT USE OR PROCESSING. 20. ATTORNEYS’ FEES AND VENUE: In any action to collect amounts due Seller with 8. CLAIM PERIOD AND REMEDIES: Prompt written notice shall be given to Seller of any respect to sales made to Buyer, arising out of or relating to this Agreement or any such claim of failure of goods to conform to the warranties hereunder. Should any failure to sales, or in which a party seeks an interpretation of this Agreement or asserts it as a conform to these warranties appear under normal and proper use within the period of one defense, the prevailing party shall be entitled to recover attorneys’ fees in an amount (1) year from the date of shipment to the Buyer, Seller shall correct such nonconformity, at determined by the Court to be reasonable, as well as such party’s costs of suit. All notices, its option, by repair or replacement of the defective goods, or by the refund of the purchase requests, claims and other communications by Buyer with respect to this Agreement or price thereof with due allowance made for the service rendered by the goods returned. In sales hereunder shall be directed to Seller at its executive offices at 1337 Braden Court, no event shall Buyer commence any action under this Agreement later than one year after Orange, California 92868 (714) 532-3355. Any action brought by Buyer against Seller must receipt of the goods. The remedies provided above are the Buyer’s sole remedies for any be brought in a state or federal court located in Orange County, California, and any action failure of Seller to comply with its obligations. Correction of any non-conformity by repair or brought in any other location shall, upon appropriate motion by Seller, be dismissed. replacement or by refund of the purchase price of the nonconforming goods (less allowance for use) shall constitute fulfillment of all obligations of Seller with respect thereto, whether the claims of Buyer are based in contract, or tort (including negligence), or otherwise. TERMS AND CONDITIONS OF SALE ARE SUBJECT TO CHANGE WITHOUT NOTICE. VISIT WWW.WARCO.COM/TERMS FOR THE MOST CURRENT TERMS AND CONDITIONS.

Tel: 714-532-3355

Contact Customer Service

Toll-Free: 800-245-8748

Email: sales@warco.com

For more information please visit us at warco.com

Corporate Office 1337 Braden Court Orange, California 92868 Tel: 714-532-3355 Fax: 714-532-2238

West American Rubber Company, LLC Sales, Manufacturing & Distribution 750 North Main Street Orange, California 92868 Tel: 714-532-3355 Fax: 714-532-2238 Email: Sales@warco.com

Biltrite Ripley Operations, LLC Sales, Manufacturing & Distribution 16310 Highway 15 North Ripley, Mississippi 38663 Tel: 800-245-8748 Fax: 662-837-0132 Email: BiltriteSales@warco.com Contents ÂŠ Copyright West American Rubber Company, LLC 2017. All rights reserved.