Accessories Fluid Conveyance Products
Hose
Master Catalog
Hose Fittings Adapters & Tube Fittings Accessories/Equipment
5
SPECIALTY & TRUCK HOSE
Accessories & Assembly Instructions Index Alphabetical Index
Part Number Index
LOW & MEDIUM PRESSURE HOSE
DESCRIPTION
PAGES
Assembly Equipment Crimp Reusable Assembly Instructions Cut Off Equipment Proof Test Equipment Skiving Equipment
327-331 332-336 309-326 337-339 341-342 340
HIGH PRESSURE HOSE HOSE FITTINGS
PART #
PG.
583 624 1561 1562 1563 1582 1597 1598 1599 222005 222022 900564 900952 900705 900729 F2015 FC425 FF9075 FF9217 FF13267 FF13268 FF13269 FF13270 FF13271 FF13272
335 296 335 335 335 335 335 335 335 295 295 295 295 295 297 336 296 222, 310 296 299 299 299 299 299 299
ADAPTERS & TUBE FITTINGS
WARNING
ACCESSORIES & ASSEMBLY INSTRUCTIONS
The user must exercise extreme care when operating any Eaton assembly equipment with powered moving components. Safety glasses must be worn at all times when using any Eaton assembly equipment.
PART #
PG.
PART #
PG.
FF13273 FF13570 FF13571 FF90308 FF90311 FT1013 FT1028 FT1033 FT1038A FT1058 FT1081 FT1090 FT1092 FT1095 FT1097 FT1101 FT1215 FT1220 FT1229 FT1230 FT1234 FT1240 FT1258 FT1260 FT1261
299 299 299 297 297 333 334 334 336 342 336 336 329 335 332 338 339 335 340 340 334 340 337 338 341
FT1271 FT1279 FT1281 FT1283 FT1307 FT1312 FT1355-01 FT1330-XL FT1380 FT1380P FT1390 FT1500 HP HPM HSM HLM S1026 S1043 S1102 S1104 S1118 S1120 SC1681 SC1709 SC1772
335 340 333 329 330 341 296 329 327 327 329 337 298 298 298 298 339 339 339 338 339 339 339 339 338
Read and understand the owners and operators manual before attempting to operate any equipment.
Eaton assembly equipment is designed to be used only with Aeroquip hose and Eaton hose fittings.
Eaton personnel are available to answer any questions, please call Eaton Corportaion, 14615 Lone Oak Road, Eden Prairie, MN 55344, 952-937-9800.
HOSE ASSEMBLY EQUIPMENT APPENDICIES
Page 2 294
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
900705
900564
900952
Stainless steel internal support coils
Steel protective coil sleeve
Steel protective coil spring
Plastic protective coil sleeve
Recommended for vacuum service with most hose.
Recommended for use where hose lines are subjected to excessive abrasion, kinking or accidental damage. Construction: spring steel, rust resistant.
Protects hose cover and reinforcement from abrasion and accidental damage. Construction; steel wire, rust resistant.
Recommended to protect hose from abrasion, this light weight plastic sleeve is unaffected by air, water, oil, gasoline, hydraulic and most other fluids. This coil can also be used for group bundling of hose lines. Temperature range of 0°F to +180°F.
.34 .42 .51 .60 .70 .73 .94 .97 1.19 1.25 1.44 1.50 1.88 1.97 2.44 2.67 3.27 4.28 5.28
*222005 is 301 stainless steel.
This coil should fit snugly to the hose O.D. expanding the coil I.D. (unwind the coil) may be necessary for proper installation. For use with hose: see pages 300-308. SLEEVE DASH NO
–17S –1S –13S –2S –3S –4S –5S –14S –6S –7S –9S –8S –10S –16S –11S
SLEEVE DASH NO
SLEEVE I.D.
mm
in.
11,2 12,7 14,5 16,0 19,0 22,3 26,2 28,7 31,0 37,3 42,9 48,5 54,1 62,0 65,0
.44 .50 .57 .63 .75 .88 1.03 1.13 1.22 1.47 1.69 1.91 2.13 2.44 2.56
For use with hose: see pages 300-308.
For use with hose: see pages 300-308.
–1S –12S –2S –15S –14S –3S –4S –5S –6S –7S –9S –8S –10S –13S –11S
PART NO SLEEVE I.D.
mm
in.
15,5 17,0 19,0 20,6 21,6 23,1 26,4 30,0 34,0 42,2 47,5 54,1 60,4 69,8 73,1
.61 .67 .75 .81 .85 .91 1.04 1.18 1.34 1.66 1.87 2.13 2.38 2.75 2.88
900952-30 900952-22 900952-16 900952-12 900952-10 900952-8 900952-6 900952-4
SLEEVE I.D.
mm
in.
40,0 34,0 27,0 21,0 16,0 12,5 9,5 6,0
1.58 1.34 1.06 .83 .63 .49 .37 .24
HOSE FITTINGS
in.
8,6 10,7 12,9 15,2 17,8 18,5 23,9 24,6 30,2 31,7 36,6 38,1 47,7 50,0 62,0 67,8 83,0 108,7 134,1
ADAPTERS & TUBE FITTINGS
mm
This coil should fit snugly to the hose O.D. expanding the coil I.D. (unwind the coil) may be necessary for proper installation.
ACCESSORIES & ASSEMBLY INSTRUCTIONS
222005-23C 222005-10C 222005-21C 222005-11C 222022-12C 222005-13C 222005-14C 222022-16C 222005-15C 222022-20C 222005-17C 222022-24C 222005-18C 222022-32C 222005-19C 222022-40C 222022-48C 222022-60C 222022-80C
COIL O.D.
HOSE ASSEMBLY EQUIPMENT
PART NUMBER
APPENDICIES
For use with hose: see pages 300-308.
HIGH PRESSURE HOSE
222005*, 222022
LOW & MEDIUM PRESSURE HOSE
SPECIALTY & TRUCK HOSE
Protective coils, sleeves & clamps
Page 3 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
295
SPECIALTY & TRUCK HOSE
624
FC425
Firesleeve
Nylon abrasion sleeve Meets MSHA requirements
LOW & MEDIUM PRESSURE HOSE
Nylon sleeve protects hose from abrasion and allows bundling of hose lines. For use with hose: see pages 300-308.
HIGH PRESSURE HOSE
Firesleeve will protect hose from direct flame. Firesleeve is constructed of a uniform single layer of braided fiberglass tubing impregnated with flame resistant silicone rubber. Temperature range of -65°F to +500°F.
HOSE FITTINGS
For use with hose: see pages 300-308. PART #
ADAPTERS & TUBE FITTINGS
624-5 624-7 624-8 624-9 624-10 624-11 624-12 624-13 624-14 624-16 624-18 624-20 624-22 624-24 624-26 624-28 624-30 624-32 624-38 624-42 624-46 624-50 624-54 624-60
I.D.
CLAMP #
ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT
mm
in.
(2 required)
7,9 11,2 12,7 14,2 15,7 17,5 19,0 20,6 22,3 25,4 28,4 31,7 35,0 38,1 41,1 44,4 47,7 50,8 60,4 66,5 73,1 79,2 85,8 95,2
.31 .44 .50 .56 .62 .69 .75 .81 .88 1.00 1.12 1.25 1.38 1.50 1.62 1.75 1.88 2.00 2.38 2.62 2.88 3.12 3.38 3.75
FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0622S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0648S FF9217-0664C FF9217-0664C FF9217-0664C FF9217-0664C
PART #
FC425-12 FC425-16 FC425-18 FC425-20 FC425-24 FC425-28 FC425-32 FC425-38 FC425-40 FC425-46 FC425-54 FC425-59
NOMINAL SLEEVE I.D.* “B”
mm
in
18,0 25,4 28,7 31,7 40,4 44,4 52,6 60,4 64,5 72,6 84,8 93,0
.71 1.00 1.13 1.25 1.59 1.75 2.07 2.38 2.54 2.86 3.34 3.66
* The maximum O.D. of hose fittings must be allowed for if fittings are to be covered.
Hose Cleaning System The Jetcleaner™ hose cleaning system offers a revolutionary solution for the internal cleaning of bulk hose and finished hose assemblies. Using a low pressure air gun, the Jetcleaner system routes a foam projectile through the hose to thoroughly remove debris remaining from cutting, skiving and assembly operations. Available in kit form or as individual components, the Jetcleaner hose cleaning system is the system of choice for hose assembly professionals.
FF9217
Firesleeve clamp
Hose Kit (P/N FT1355-01) Includes: Jetcleaner pistol, Hose nozzles, 1/4" through 2" ID, Adapter ring, Bench stand, Aluminum case,Quick disconnect coupling Note: Hose projectiles (P/N FT1355-3-size) not included in kit. Also available individually: Jetcleaner pistol – FT1355-1-01 Hose nozzles – FT1355-2-size Hose projectiles – FT1355-3-size Coupling nozzles – FT1355-4-size Coupling projectiles – FT1355-5-size Adapter ring – FT1355-10-01 Carrying case – FT1355-11-02
Recommended for attaching 624 Firesleeve to hose lines.
Bench stand – FT1355-12-01
Clamp numbers: FF92170622S, FF9217-0648S; 3/8 inch wide, FF9217-0664C; 1/2 inch wide. For use with hose: see pages 300-308.
APPENDICIES
Page 4 296
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
The lining will withstand high ambient temperatures. Bolt hole dia: Clamp dash no. –01 thru –8, –18 thru –23 is .406; –9 thru –17, –24 thru –31 is .531. For use with hose: see pages 300-308.
mm
in
6,3 9,6 11,2 12,7 14,2 16,0 17,5 19,0 20,6 23,9 25,4 26,9 28,7 30,2 31,7 33,3 38,1 39,6 44,4 46,0 50,8 52,3 57,1 63,5 66,8 69,8 73,1 90,4
.25 .38 .44 .50 .56 .63 .69 .75 .81 .94 1.00 1.06 1.13 1.19 1.25 1.31 1.50 1.56 1.75 1.81 2.00 2.06 2.25 2.50 2.63 2.75 2.88 3.56
FF90308 Hose Insertion Gages Improve hose assembly reliability with these easy to use aluminum gages that are designed to ensure proper fitting depth during pre-assembly. Simply bottom the hose in the appropriately marked cavity and scribe a mark on the hose flush with the top surface of the gauge. Insert the fitting until the back of the socket is aligned with scribe line.
For use with all hoses that mate with TTC, TTC12 and Global Spiral TTC fittings PART NUMBER
USAGE
FF90308-01
For use with all hoses that mate with -4 through -16 TTC and TTC12 fittings For use with all hoses that mate with -20 through -32 TTC and TTC 12 fittings For use with all hoses that mate with -12, -16, -20 Spiral TTC fittings
FF90308-02 FF90308-03
HOSE ASSEMBLY EQUIPMENT
–18 –19 –01 –1 –2 –21 –3 –4 –5 –6 –23 –8 –9 –27 –24 –25 –10 –11 –12 –28 –13 –29 –14 –30 –31 –15 –16 –17
CLAMP I.D. CLOSED
APPENDICIES
CLAMP DASH NO.
0.50 0.54 0.59 0.63 0.67 0.69 0.75 0.81 0.87 0.94 1.00 1.05 1.10 1.18 1.26 1.31 1.41 1.50 1.57 1.66 1.75 1.90 2.00 2.25 2.50 2.76
ADAPTERS & TUBE FITTINGS
This clamp not only furnishes a cleaner installation, but prevents damage, exposure and chafing.
in
12,7 13,7 15,0 16,0 17,1 17,4 19,0 20,5 22,2 23,9 25,4 26,6 28,0 30,0 32,0 33,4 35,7 38,1 40,0 42,2 44,5 48,3 50,8 57,2 63,5 70,0
ACCESSORIES & ASSEMBLY INSTRUCTIONS
These lightweight vinylcoated steel support clamps are designed to support hose where long runs are necessary.
These heavy duty weldbased clamps are designed to securely hold hose in applications subject to impulsing, flexing and vibrating conditions. The clamps help prevent abrasion and extend hose life through proper routing. Clamps are rated to ambient temperature of +250°F. See pages 300-308 for detailed clamp to hose part number reference.
mm
FF90311-127 FF90311-137 FF90311-150 FF90311-160 FF90311-171 FF90311-174 FF90311-190 FF90311-205 FF90311-222 FF90311-239 FF90311-254 FF90311-266 FF90311-280 FF90311-300 FF90311-320 FF90311-334 FF90311-357 FF90311-381 FF90311-400 FF90311-422 FF90311-445 FF90311-483 FF90311-508 FF90311-572 FF90311-635 FF90311-700
SPECIALTY & TRUCK HOSE
Heavy Duty Hose Support Clamps
INSIDE DIAMETER
LOW & MEDIUM PRESSURE HOSE
Support clamp
CLAMP P/N
HIGH PRESSURE HOSE
FF90311
HOSE FITTINGS
900729
Page 5 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
297
Hose Protectors SPECIALTY & TRUCK HOSE
PART NUMBER
HP4*
HP6*
HP8* LOW & MEDIUM PRESSURE HOSE
HPM*
DESCRIPTION
4" Hose Protector Case of 50 6" Hose Protector Case of 50 8" Hose Protector Case of 50 Mixed Hose Protectors Case of 60
Features:
Market Applications:
• Hydraulic Hoses
• Extremely high wear factor
• Farming
• Battery Cables
• Formulated to resist solvents, oils, grease, gasoline, etc.
• Industrial
Abrasion Protection For:
• Wiring Harness • Brake Systems • Fuel Lines • Air Lines • Radiator Hoses • Oil Lines
*Hose protectors available in black, orange or yellow.
• 3 grooves protect cable ties and prevent slipping • Operating temperature range is -40° to 430°F.
• Trucking • Mining • Construction • Aviation Support • Public Transportation
• Exceptionally cost effective
• Road Maintenance
• Easy installation in minutes – no need to remove hose
• Waste Management • Original Equip. Manuf.
HIGH PRESSURE HOSE
• Packed in easy to assemble, colorful, counter display box • Available in 3 sizes – 4", 6" and 8" – cable ties included
HOSE FITTINGS
Hose Spacers
Features:
PART NUMBER
• Prevents hose abrasion at points of contact
HSM-48
DESCRIPTION
Case of 48 mixed Hose Spacers
• Helps keep hoses organized • Prevents damage from unrestrained hoses
ADAPTERS & TUBE FITTINGS
• Easy to install • Available in 4 sizes – 3/ ", 1", 11/ ", 13/ " 4 8 8 • Packed in colorful counter display boxes of 48 – cable ties included
ACCESSORIES & ASSEMBLY INSTRUCTIONS
• Also available in mixed boxes of 48 (12 each size) or refill bags of 12
Hose Looms
Features:
PART NUMBER
• Prevents hose abrasion at points of contact
HLM-48
DESCRIPTION
HOSE ASSEMBLY EQUIPMENT
Case of 48 mixed Hose Looms
• Keeps multiple hoses organized • Simplifies hose routing • Prevents damage from unrestrained hoses • Easy to install • Available in 4 sizes – 3/ ", 1", 11/ ", 13/ " 4 8 8
APPENDICIES
• Packed in colorful counter display boxes of 48 • Also available in mixed boxes of 48 (12 each size) or refill bags of 12 298
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 6
Benefits • Multiple surface contact points
• Coated with Loctite** sealant • Economical method to reduce minor leaks and weeping connections • Built-in clip to attach the Flaretite seal to the nose of the SAE 37 degree connection
SPECIALTY & TRUCK HOSE
Features • Ribbed insert design
• Locks the joint and fills surface imperfections • Saves time & money associated with maintenance and rework • Quick & easy assembly
LOW & MEDIUM PRESSURE HOSE
The ideal product to enhance new installations of SAE 37˚ connections, as well as seal off minor leaks and weeping connections.
Flaretite* Seals
• Available sizes: -04 through -32
Coating
Reduced Flared End
Stamping
Standard Flared Connection (Section)
Flaretite Seal Custom Sealant & Locking Ribs
HIGH PRESSURE HOSE
Flaretite Seal Joint Section of Applied Seal
Metal to Metal Flare Sleeve Seal across the face of the connection
Tubing Imperfection in 1 degree max. Nipple sealed by mis-alignment coating Nipple
JIC 37˚ Standard Flared Fitting Standard Flare Nut & Sleeve
PACKAGE PART NUMBER
NUMBER OF SEALS PER PACKAGE
-04 -06 -08 -10 -12 -16 -20 -24 -32
FF13267 FF13268 FF13269 FF13270 FF13271 FF13272 FF13273 FF13570 FF13571
100 100 100 100 100 50 50 25 10
*
Flaretite is a registered trademark of Flaretite Inc. All photos and the name Flaretite are the property of Flaretite Inc.
** Loctite is a registered trademark of Henkel Loctite Corporation.
ACCESSORIES & ASSEMBLY INSTRUCTIONS
To assemble an SAE 37˚ connection using a Flaretite seal, simply push the Flaretite seal onto the male portion of the connection. The built-in clip will hold the Flaretite seal onto the male half.
During assembly ensure: • The seal is fitted squarely to the conical nose of the JIC fitting -37˚ flare. • The sealing faces of the flared connector part are clean and free of burrs.
HOSE ASSEMBLY EQUIPMENT
Assembly and Torque Requirements
ADAPTERS & TUBE FITTINGS
SEAL SIZE
Flared Tubing or Machined Flared Connection (Hose end)
• The flared joint is correctly tightened with recommended torque settings noted below.
RECOMMENDED TORQUE SETTINGS:
Tolerance: +10% -0% -04 (1/4”) -06 (3/8”) -08 (1/2”)
SAE 37˚: 14lb-ft. SAE 37˚: 26lb-ft. SAE 37˚: 55lb-ft.
-10 (5/8”) -12 (3/4”) -16 (1”)
SAE 37˚: 80lb-ft. SAE 37˚: 110lb-ft. SAE 37˚: 140lb-ft.
-20 (1-1/4”) -24 (1-1/2”) -32 (2”)
APPENDICIES
Sealing Rings of Flaretite Seal compressed to match mis-alignment of flared faces.
HOSE FITTINGS
Imperfection in Tube Flare Sealed by Coating
SAE 37˚: 190lb-ft. SAE 37˚: 220lb-ft. SAE 37˚: 325lb-ft.
Page 7 EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
299
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Part #
LOW & MEDIUM PRESSURE HOSE
302A16 302A20 302A24 302A32 303-4 303-5 303-6 303-8 303-10 303-12 1503-4 1503-5 1503-6 1503-8 1503-10 1503-12 1503-16 1503-20 1503-24 1503-32 1503-40 1531-10 1531-12 1531-16 1531-20 1531A-24 2550-6 2554-6 2555-6 2556-4 2556-6 2556-8 2556-10 2556-12 2565-4 2565-6 2565-8 2565-10 2565-12 2570-6 2570-8 2570-10 2575-4 2575-6 2575-8 2575-10 2575-12 2580-4 2580-5 2580-6 2580-8 2580-10
HIGH PRESSURE HOSE HOSE FITTINGS ADAPTERS & TUBE FITTINGS ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES
Steel Prot. Coil Spring* 900564 (dash size)
Plastic Coil Sleeve 900952 (dash size)
-6S -7S -9S -10S -1S -12S -2S -14S -4S -5S -1S -12S -2S -14S -4S -5S -6S -7S -9S -10S
-16 -22 -22 -30 -6 -8 -10 -12 -12 -16 -6 -8 -10 -12 -12 -16 -16 -22 -22 -30
-4S -5S -7S -7S -6S -14S -14S -14S -1S -12S -14S -4S -5S -1S -12S -14S -4S -5S -14S -4S -5S -1S -12S -14S -4S -5S -1S -12S -2S -14S -4S
-12 -16 -16 -22 -16 -10 -10 -10 -6 -8 -10 -12 -16 -6 -8 -10 -12 -16 -10 -12 -16 -6 -8 -10 -12 -16 -6 -8 -10 -12 -12
Steel Prot. Coil Sleeve* 900705 (dash size)
Support Clamp 900729 (dash size)
-6S -7S -9S -10S -1S -13S -2S -3S -4S -5S -1S -13S -2S -3S -4S -5S -6S -7S -9S -10S -12S -4S -5S -6S -7S -5S -3S -2S -2S -1S -13S -3S -4S -5S -1S -13S -3S -4S -5S -3S -4S -5S -1S -13S -3S -4S -5S -1S -13S -2S -3S -4S
-27 -10 -12 -14 -1 -2 -21 -4 -6 -8 -1 -2 -21 -4 -6 -8 -27 -10 -12 -14 -16 -6 -8 -25 -10 -9 -4 -4 -4 -1 -21 -4 -5 -23 -1 -21 -4 -6 -8 -4 -6 -8 -1 -21 -4 -6 -23 -1 -2 -21 -4 -6
Internal Support Coil
Nylon Sleeve* FC425 (dash size)
Firesleeve* 624 (dash size)
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-24 -28 -32 -38 -12 -12 -16 -16 -20 -20 -12 -12 -16 -16 -20 -20 -24 -28 -32 -38
-24 -30 -32 -38 -11 -12 -14 -16 -18 -20 -11 -12 -14 -16 -18 -20 -24 -30 -32 -38
-0648S -0648S -0648S -0648S -0622S -0622S -0622S -0622S -0630S -0630S -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S -0648S
-320 -381 -445 -572 -127 -150 -174 -190 -239 -280 -137
-20 -20 -24 -28 -24 -16 -16 -16 -12 -16 -16 -16 -20 -12 -16 -16 -16 -20 -16 -16 -20 -12 -16 -16 -20 -20 -12 -12 -16 -16 -20
-16 -20 -24 -30 -32 -13 -13 -13 -9 -11 -13 -16 -18 -9 -11 -13 -16 -18 -13 -18 -20 -9 -11 -13 -16 -18 -11 -12 -14 -16 -18
-0622S -0630S -0630S -0648S -0648S -0622S -0622S -0622S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0648S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0622S -0622S -0630S
-239 -280 -357 -422 -483 -174 -174 -190 -127 -160 -190 -222 -266 -127 -160 -205 -239 -280 -174 -190 -239 -127 -160 -190 -222 -266 -127 -150 -174 -190 -239
222005-14C 222005-15C 222005-17C 222005-18C
222005-10C 222005-21C 222005-13C
222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C 222005-18C 222005-19C
222005-11C 222005-13C
222005-10C 222005-21C
-174 -190 -239 -280 -320 -381 -445 -572
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. 300
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 8
-6 -8 -8 -10 -12 -12 -16 -22 -22 -30 -30 -8 -12 -12 -16 -16 -22 -30 -30 -30 -4 -4
-1S -13S -2S -3S -4S -5S -14S -7S -9S -15S -11S -2S -3S -4S -5S -6S -7S -8S -10S -11S
-1 -21 -3 -4 -5 -23 -27 -10 -28 -29 -31 -3 -5 -6 -8 -24 -11 -13 -14 -15 -18 -18
222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C 222005-18C 222005-19C
222005-14C 222005-15C 222005-17C 222005-18C 222005-19C
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-280 -320 -381 -445 -572 -150 -190 -239 -320 -381 -445 -137
-20 -24 -28 -32 -40 -12 -16 -20 -24 -28 -32 -12 -12 -16 -16 -20 -20 -24 -28 -32 -38 -54 -24 -28 -32 -38 -46 -54
-20 -24 -28 -32 -42 -11 -16 -20 -24 -28 -32 -11 -12 -14 -16 -18 -20 -24 -30 -32 -42 -50 -24 -28 -32 -38 -46 -54 -60
-0630S -0648S -0648S -0648S -0648S -0622S -0622S -0648S -0648S -0648S -0648S -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S -0648S -0664C -0630S -0648S -0648S -0648S -0664C -0664C
-12 -16 -16 -16 -20 -20 -24 -28 -32 -38 -46 -16 -16 -20 -20 -24 -28 -38 -40 -54
-11 -12 -14 -18 -20 -20 -22 -28 -38 -38 -46 -14 -16 -18 -20 -26 -30 -38 -42 -46 -7 -8
-0622S -0622S -0630S -0630S -0630S -0630S -0648S -0648S -0648S -0648S -0664C -0622S -0630S -0630S -0630S -0648S -0648S -0648S -0648S -0664C -0622S -0622S
-174 -190 -239 -280 -320 -381 -445 -572 -320 -381 -445 -508 -635
-160 -205 -222 -266 -300 -381 -445 -508 -635 -174 -222 -239 -280 -320 -400 -508 -572 -700
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
LOW & MEDIUM PRESSURE HOSE
-1S -12S -2S -14S -4S -5S -6S -7S -8S -10S -13S -2S -3S -4S -5S -6S -7S -8S -10S -11S
222005-13C 222005-14C 222005-15C 222005-17C 222005-18C
Firesleeve* 624 (dash size)
HIGH PRESSURE HOSE
-16 -22 -22 -30
-8 -27 -10 -12 -14 -2 -4 -6 -24 -10 -12 -1 -2 -21 -4 -6 -8 -27 -10 -12 -14 -16 -24 -10 -12 -29 -30
Nylon Sleeve* FC425 (dash size)
HOSE FITTINGS
-6S -7S -8S -10S -13S
-5S -6S -7S -9S -10S -1S -3S -4S -14S -7S -9S -1S -13S -2S -3S -4S -5S -6S -7S -9S -10S -12S -14s -7S -9S -15S -16S
Internal Support Coil
ADAPTERS & TUBE FITTINGS
-16 -16 -22 -22 -30 -8 -10 -12 -16 -22 -22 -6 -8 -10 -12 -12 -16 -16 -22 -22 -30
Support Clamp 900729 (dash size)
ACCESSORIES & ASSEMBLY INSTRUCTIONS
-5S -6S -7S -9S -10S -1S -14S -4S -6S -7S -8S -1S -12S -2S -14S -4S -5S -6S -7S -9S -10S
Steel Prot. Coil Sleeve* 900705 (dash size)
HOSE ASSEMBLY EQUIPMENT
2580-12 2580-16 2580-20 2580-24 2580-32 2583-4 2583-6 2583-8 2583-12 2583-16 2583-20 2651-4 2651-5 2651-6 2651-8 2651-10 2651-12 2651-16 2651-20 2651-24 2651-32 2651-40 2661-12 2661-16 2661-20 2661-24 2661-32 2661-40 2661-48 2661-64 2681-3 2681-4 2681-5 2681-6 2681-8 2681-10 2681-12 2681-16 2681-20 2681-24 2681-32 2781-4 2781-6 2781-8 2781-10 2781-12 2781-16 2781-20 2781-24 2781-32 2807-3 2807-4
Plastic Coil Sleeve 900952 (dash size)
APPENDICIES
Part #
Steel Prot. Coil Spring* 900564 (dash size)
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Page 9 301
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Part #
LOW & MEDIUM PRESSURE HOSE
2807-5 2807-6 2807-8 2807-10 2807-12 2807-16 2807-20 2808-8 2808-10 2808-12 2808-16 2808-20 2808-24 CR170-4 CR170-6 CR170-8 FC194-04 FC194-06 FC194-08 FC194-10 FC194-12 FC194-16 FC194-20 FC195-04 FC195-06 FC195-08 FC195-10 FC195-12 FC195-16 FC195-20 FC195-24 FC195-32
HIGH PRESSURE HOSE HOSE FITTINGS ADAPTERS & TUBE FITTINGS ACCESSORIES & ASSEMBLY INSTRUCTIONS
Steel Prot. Coil Spring* 900564 (dash size)
Plastic Coil Sleeve 900952 (dash size)
Steel Prot. Coil Sleeve* 900705 (dash size)
Support Clamp 900729 (dash size)
-1S -2S -2S -3S -5S -12S -2S -14S -5S -7S -7S -1S -2S -14S -12S -14S -4S -5S -6S -7S -8S -2S -3S -4S -5S -6S -7S -8S -10S -11S
-4 -6 -8 -8 -10 -12 -16 -6 -8 -10 -16 -16 -22 -6 -10 -12 -8 -10 -12 -12 -16 -22 -22 -8 -12 -12 -16 -16 -22 -30 -30 -30
-17S -1S -3S -3S -5S -6S -1S -2S -3S -5S -6S -7S -1S -2S -3S -13S -3S -4S -5S -14S -7S -9S -2S -3S -4S -5S -6S -7S -8S -10S -11S
-19 -01 -1 -21 -4 -23 -24 -2 -3 -5 -8 -25 -11 -1 -21 -4 -21 -4 -5 -23 -27 -10 -28 -3 -5 -6 -8 -24 -11 -13 -14 -15
Internal Support Coil
Nylon Sleeve* FC425 (dash size)
Firesleeve* 624 (dash size)
Firesleeve Clamp FF9217 (dash size)
-12 -16 -16 -20 -24 -12 -16 -16 -20 -24 -28 -12 -16 -16 -16 -16 -20 -20 -24 -28 -32 -16 -16 -20 -20 -24 -28 -38 -38 -54
-9 -10 -12 -14 -16 -20 -24 -16 -18 -20 -26 -32 -38 -11 -14 -16 -12 -18 -20 -20 -22 -26 -32 -14 -16 -18 -20 -26 -30 -38 -42 -46
-0622S -0622S -0622S -0630S -0630S -0630S -0648S -0622S -0630S -0630S -0648S -0648S -0648S -0622S -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S -0622S -0622S -0630S -0630S -0630S -0648S -0648S -0648S -0648S
222005-23C 222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C
222005-10C
Heavy Duty Support Clamp FF9031 (dash size)
-137 -160 -190 -266 -320 -150 -174 -205 -280 -334 -422
-160 -205 -222 -266 -300 -381 -445 -174 -222 -239 -280 -320 -400 -500 -572 -700
HOSE ASSEMBLY EQUIPMENT APPENDICIES *Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. 302
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 10
-21 -4 -4 -23 -9 -24
-4S -6S -7S -8S -10S -10S -6S -7S -8S -10S -11S -1S -12S -2S -14S -4S -5S -6S -7S -9S -10S
-12 -16 -22 -22 -30 -30 -16 -22 -30 -30
-4S -6S -7S -9S -10S -11S -6S -7S -8S -10S
-6 -8 -10 -12 -12 -16 -16 -22 -22 -30
-12S -14S -3S -4S -5S -7S -9S -6S -1S -12S -2S -14S -4S -5S -6S -5S -6S -8S -10S
-6 -10 -12 -12 -16 -16 -30 -16 -6 -8 -10 -12 -12 -16 -16 -16 -22 -30 -30
-1S -13S -2S -3S -4S -5S -6S -7S -9S -10S -12S -1S -2S -3S -4S -5S -6S -8S -14s -1S -13S -2S -3S -4S -5S -6S -14S -7S -15S -10S
-6 -24 -10 -28 -29 -31 -24 -10 -13 -14 -16 -1 -2 -21 -4 -6 -8 -27 -10 -12 -14 -16 -2 -4 -5 -6 -8 -25 -12 -24 -1 -2 -21 -4 -5 -8 -27 -27 -25 -28 -29
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
222005-10C 222005-21C 222005-13C 222005-14C
-12 -12 -16 -16 -20 -20
-11 -12 -12 -13 -16 -20
-0622S -0622S -0622S -0622S -0630S -0630S
-20 -24 -28 -32 -38 -54 -24 -28 -38 -40 -54 -12 -12 -16 -16 -20 -20 -24 -28 -32 -38
-18 -26 -30 -32 -38 -46 -26 -30 -38 -42 -46 -11 -12 -14 -16 -18 -20 -24 -30 -32 -38
-0630S -0648S -0648S -0648S -0648S -0664C -0648S -0648S -0648S -0664C -0664C -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S -0648S
-150 -174 -190 -239 -280 -320 -205 -239 -266 -334 -254 -320 -381 -445
-12 -12 -16 -20 -20 -24 -32 -24 -12 -12 -16 -16 -20 -20 -24 -24 -28 -32 -38
-12 -16 -16 -18 -22 -24 -30 -24 -11 -12 -14 -16 -18 -20 -22 -24 -28 -32 -38
-0622S -0622S -0630S -0630S -0630S -0648S -0648S -0630S -0622S -0622S -0622S -0622S -0630S -0630S -0630S -0643S -0643S -0648S -0648S
222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C 222005-18C 222005-19C
222005-10C 222005-11C 222005-13C 222005-14C
LOW & MEDIUM PRESSURE HOSE
-2S -3S -4S -5S -14S -7S
Firesleeve* 624 (dash size)
HIGH PRESSURE HOSE
-10 -12 -12 -16 -16 -22
Nylon Sleeve* FC425 (dash size)
-700 -320 -381 -508 -572 -700 -137
HOSE FITTINGS
-1S -2S -3S -4S -5S -6S
Internal Support Coil
-174 -190 -239 -280 -320 -381 -445 -572
ADAPTERS & TUBE FITTINGS
Support Clamp 900729 (dash size)
ACCESSORIES & ASSEMBLY INSTRUCTIONS
Steel Prot. Coil Sleeve* 900705 (dash size)
-137 -174 -205 -239 -280 -357 -422 -320 -137 -150 -174 -190 -239 -280 -320 -300 -381
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
HOSE ASSEMBLY EQUIPMENT
FC234-05 FC234-06 FC234-08 FC234-10 FC234-12 FC234-16 FC252-08 FC252-10 FC252-12 FC252-16 FC254-08 FC254-12 FC254-16 FC254-20 FC254-24 FC254-32 FC273-12 FC273-16 FC273-20 FC273-24 FC273-32 FC300-04 FC300-05 FC300-06 FC300-08 FC300-10 FC300-12 FC300-16 FC300-20 FC300-24 FC300-32 FC300-40 FC310-04 FC310-06 FC310-08 FC310-10 FC310-12 FC310-16 FC310-20 FC318-12 FC321-04 FC321-05 FC321-06 FC321-08 FC321-10 FC321-12 FC321-16 FC323-12 FC323-16 FC323-20 FC323-24
Plastic Coil Sleeve 900952 (dash size)
APPENDICIES
Part #
Steel Prot. Coil Spring* 900564 (dash size)
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Page 11 303
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Part #
LOW & MEDIUM PRESSURE HOSE
FC323-32 FC324-08 FC324-12 FC324-16 FC325-12 FC325-16 FC332-04 FC332-06 FC332-08 FC332-10 FC332-12 FC350-04 FC350-05 FC350-06 FC350-08 FC350-10 FC350-12 FC350-16 FC350-20 FC350-24 FC352-08 FC352-10 FC352-12 FC352-14 FC352-16 FC352-18 FC352-20 FC352-22 FC352-24 FC352-26 FC352-28 FC352-32 FC352-36 FC352-38 FC352-40 FC352-44 FC352-48 FC352-56 FC352-64 FC355-04 FC355-05 FC355-06 FC355-08 FC355-10 FC355-12 FC355-16 FC355-20 FC355-24 FC355-32 FC363-08 FC363-12
HIGH PRESSURE HOSE HOSE FITTINGS ADAPTERS & TUBE FITTINGS ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES
Steel Prot. Coil Spring* 900564 (dash size)
Plastic Coil Sleeve 900952 (dash size)
Steel Prot. Coil Sleeve* 900705 (dash size)
Support Clamp 900729 (dash size)
-13S -4S -6S -7S -6S -7S -1S -12S -14S -3S -5S -1S -12S -2S -14S -4S -16S -6S -7S -9S
-30 -12 -16 -22 -16 -22 -6 -8 -10 -12 -12 -6 -8 -10 -12 -12 -5 -16 -22 -22
-11S -4S -14S -7S -6S -7S -1S -13S -3S -4S -5S -1S -13S -2S -3S -4S -5S -6S -7S -9S
-31 -6 -27 -10 -24 -10
-1S -1S -12S -2S -3S -4S -5S -6S -7S -9S -15S -5S
-6 -6 -8 -10 -12 -6 -16 -22 -22 -22 -10 -16
-1S -2S -1S -13S -3S -5S-4S -6S -7S -7S -9S -4S -6S
-1 -1 -2 -3 -5 -6 -9 -24 -10 -12 -5 -8
-21 -4 -5 -23 -1 -2 -21 -4 -6 -8 -27 -10 -12
Internal Support Coil
Nylon Sleeve* FC425 (dash size)
Firesleeve* 624 (dash size)
Firesleeve Clamp FF9217 (dash size)
222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C
-46 -20 -24 -28 -24 -28 -12 -16 -16 -20 -20 -12 -12 -16 -16 -20 -20 -24 -28 -32
-46 -18 -26 -30 -26 -30 -9 -11 -13 -16 -18 -11 -12 -14 -16 -18 -20 -24 -30 -32
-0664C -0622S -0648S -0648S -0648S -0648S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S
-12 -12 -12 -16 -16 -20 -20 -24 -28 -32 -16 -20
-11 -11 -12 -12 -13 -16 -20 -22 -30 -32 -14 -20
-0622S -0622S -0622S -0622S -0622S -0630S -0630S -0648S -0648S -0648S -0622S -0630S
222005-10C 222005-21C 222005-13C 222005-14C 222005-15C 222005-17C
Heavy Duty Support Clamp FF9031 (dash size)
-239 -300 -381 -320 -381 -127 -160 -190 -222 -266 -127 -150 -174 -190 -239 -280 -320 -381 -445 -239 -266 -300 -334 -357 -400 -422 -445 -508 -508 -572 -635 -700
-127 -150 -174 -190 -239 -280 -320 -381 -445 -572 -190 -266
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. 304
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 12
-4 -4 -4 -6 -8 -8 -10 -12 -16 -6 -8 -10 -12 -12 -6 -8 -10 -6 -8 -10 -12 -12 -6 -10 -12 -12 -16 -16 -30 -12 -16 -16 -22 -22 -30 -8 -22 -30 -30 -6
222005-23C 222005-10C 222005-21C 222005-13C 222005-14C 222005-15C
222005-23C 222005-10C 222005-21C
222005-15C 222005-17C 222005-18C
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-24 -28 -32 -59 -16 -20 -24 -28 -32 -59 -54
-22 -26 -30 -42 -14 -20 -22 -26 -30 -42 -50
-0630S -0648S -0648S -0648S -0622S -0630S -0630S -0648S -0648S -0648S -0664S
-320 -381 -445 -572 -190 -266 -320 -381 -445 -572 -635
-12 -12 -16 -16 -20 -24 -12 -16 -16 -20 -20 -12 -16 -16 -12 -16 -16 -20 -20 -12 -16 -16 -20 -20 -24 -32 -16 -20 -24 -28 -32 -40 -16 -28 -38 -40 -12
-9 -9 -10 -11 -13 -14 -16 -20 -24 -9 -11 -13 -16 -18 -12 -14 -16 -9 -11 -13 -16 -18 -12 -16 -16 -18 -22 -24 -30 -16 -22 -26 -30 -32 -42 -14 -30 -38 -42 -11
-0622S -0622S -0622S -0622S -0622S -0622S -0622S -0648S -0648S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0622S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0630S -0630S -0630S -0630S -0648S -0622S -0648S -0648S -0648S -0648S -0648S -0622S -0648S -0648S -0648S -0622S
LOW & MEDIUM PRESSURE HOSE
-1S -13S -3S -5S -6S -1S -13S -3S -4S -5S -1S -13S -2S -1S -13S -3S -4S -5S -1S -2S -3S -4S -5S -6S -8S -3S -14S -6S -7S -9S -10S -2S -7S -8S -10S -1S
-18 -18 -19 -01 -1 -21 -4 -23 -24 -1 -21 -4 -5 -23 -1 -21 -4 -1 -21 -4 -5 -23 -2 -4 -5 -6 -8 -25 -12 -5 -9 -2S -11 -28 -14 -3 -10 -13 -14 -1
Firesleeve* 624 (dash size)
HIGH PRESSURE HOSE
-30
-10 -11 -2S -30 -5 -8 -10 -11 -28 -30 -16
Nylon Sleeve* FC425 (dash size)
-137 -160 -190 -266 -320 -127 -160 -190 -222 -266
HOSE FITTINGS
-1S -1S -2S -3S -5S -1S -12S -14S -3S -5S -1S -1S -12S -1S -12S -14S -4S -5S -12S -14S -3S -4S -5S -7S -9S -15S -5S -6S -7S -9S -10S -2S -7S -8S -10S -1S
-10 -16 -22 -30 -30
-7S -9S -8S -16S -4S -6S -7S -9S -8S -16S -12S
Internal Support Coil
ADAPTERS & TUBE FITTINGS
-16 -22 -22
Support Clamp 900729 (dash size)
-150 -127 -160 -190 -222 -266
ACCESSORIES & ASSEMBLY INSTRUCTIONS
-6S -7S -9S -10S -15S -5S -6S -7S -9S -10S -11S
Steel Prot. Coil Sleeve* 900705 (dash size)
-174 -205 -239 -280 -334 -422 -205 -280 -334
HOSE ASSEMBLY EQUIPMENT
FC363-16 FC363-20 FC363-24 FC363-32 FC364-08 FC364-12 FC364-16 FC364-20 FC364-24 FC364-32 FC364-40 FC364-48 FC465-03 FC465-04 FC465-05 FC465-06 FC465-08 FC465-10 FC465-12 FC465-16 FC465-20 FC466-04 FC466-06 FC466-08 FC466-10 FC466-12 FC469-06 FC469-08 FC469-10 FC498-04 FC498-06 FC498-08 FC498-10 FC498-12 FC510-04 FC510-06 FC510-08 FC510-10 FC510-12 FC510-16 FC510-20 FC563-08 FC563-12 FC563-16 FC563-20 FC563-24 FC563-32 FC579-04 FC606-16 FC606-20 FC606-24 FC611-04
Plastic Coil Sleeve 900952 (dash size)
-174 -422 -508 -572 -137
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used.
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
APPENDICIES
Part #
Steel Prot. Coil Spring* 900564 (dash size)
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Page 13 305
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Part #
LOW & MEDIUM PRESSURE HOSE
FC611-06 FC611-08 FC611-12 FC611-16 FC611-20 FC611-24 FC611-32 FC619-12 FC619-16 FC619-20 FC619-24 FC619-32 FC636-12 FC636-16 FC636-20 FC636-24 FC639-04 FC639-06 FC639-08 FC639-10 FC639-12 FC639-16 FC645-06 FC647-04 FC647-06 FC647-08 FC647-10 FC647-12 FC650-04 FC650-06 FC650-08 FC650-10 FC650-12 FC659-06 FC659-08 FC659-10 FC659-12 FC659-16 FC659-20 FC693-04 FC693-06 FC693-08 FC699-04 FC699-06 FC699-08 FC699-10 FC699-12 FC735-16 FC736-06 FC736-08 FC736-10 FC736-12
HIGH PRESSURE HOSE HOSE FITTINGS
Steel Prot. Coil Spring* 900564 (dash size)
Plastic Coil Sleeve 900952 (dash size)
-15S -3S -5S -7S -9S -8S -13S -6S -6S -8S -10S -13S -5S -6S -8S -8S -1S -2S -15S -54S -5S -7S
-10 -10 -16 -22 -30 -30 -30 -16 -22 -22 -30
ADAPTERS & TUBE FITTINGS
-1S -12S -14S -3S -5S -1S -2S -14S
ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES
-54S -3S -4S -5S -6S -7S -8S -1S -1S -3S -12S -14S -3S -4S -5S -7S -3S -4S -5S -6S
-16 -22 -22 -30 -6 -10 -10 -16 -16 -22 -6 -6 -8 -10 -12 -12 -6 -10 -12 -12 -16 -12 -12 -16 -16 -22 -22 -8 -10 -12 -6 -10 -12 -12 -16 -22 -12 -12 -16 -16
Steel Prot. Coil Sleeve* 900705 (dash size)
Support Clamp 900729 (dash size)
-2S -3S -5S -6S -8S -8S -12S -6S -7S -9S -15S -16S -14S -7S -10S -10S -1S -2S -3S -5S -6S -7S -17S -1S -13S -3S -4S -5S -1S -2S -3S -3S -5S -3S -4S -5S -6S -7S -8S -13S -2S -3S -1S -2S -3S -4S -5S -7S -3S -4S -5S -6S
-3 -5 -8 -25 -12 -13 -30 -27 -25 -12 -29 -30 -27 -25 -28 -29 -1 -3 -5 -6 -9 -10 -01 -1 -21 -4 -5 -23 -1 -21 -4 -5 -6 -5 -6 -8 -24 -11 -28 -2 -4 -5 -2 -4 -5 -6 -8 -10 -5 -6 -8 -24
Internal Support Coil
Nylon Sleeve* FC425 (dash size)
222005-19C
222005-17C 222005-18C
222005-14C 222005-15C 222005-23C
222005-10C
222005-15C
-16 -16 -24 -24 -32 -38 -46 -24 -28 -32 -38 -46 -24 -28 -32 -38 -12 -16 -16 -20 -22 -24 -12 -16 -16 -20 -20 -12 -16 -16 -16 -20 -16 -20 -20 -24 -28 -32 -12 -16 -18 -12 -16 -16 -20 -20 -24 -16 -20 -20 -24
Firesleeve* 624 (dash size)
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-14 -16 -24 -24 -30 -38 -46 -26 -28 -32 -38 -46 -24 -28 -38 -38 -11 -14 -16 -20 -22 -28 -10 -9 -11 -13 -16 -18 -11 -14 -16 -16 -20 -16 -18 -20 -26 -28
-0622S -0630S -0630S -0648S -0648S -0648S -0664C -0648S -0643S -0648S -0648S -0664C 0643S -0643S -0648S -0648S -0622S -0622S -0622S -0630S -0648S -0648S -0622S -0622S -0622S -0622S -0622S -0630S -0622S -0622S -0622S -0622S -0630S -0630S -0630S -0630S -0630S -0630S
-174 -205 -280 -357 -422 -483 -635 -300 -381 -445 -508 -635 -300 -381
-160 -190 -205 -254 -205 -239 -280 -300 -381
-12 -16 -18 -12 -16 -16 -18 -22 -28 -16 -18 -20 -26
0622S -0622S -0622S -0622S -0622S -0630S -0630S -0630S -0648S -0630S -0630S -0630S -0630S
-174 -205 -239 -280 -357 -205 -239 -280 -300
-137 -174 -205 -239 -280 -357 -127 -160 -190 -222 -266
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used.
306
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 14
-11 -28 -2 -3 -5 -6 -9 -10 -29 -30 -1 -3 -5 -6 -6 -8 -25 -1 -2 -4 -5 -6 -9 -10 -12 -13 -30 -13 -5 -6 -8 -27 -10 -28 -29 -31 -24 -10 -28 -1 -3 -5 -8 -25 -12 -13 -30 -1 -21 -4 -2
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-28 -32 -12 -16 -16 -20 -22 -24 -32 -38 -46 -12 -16 -16 -20 -20 -24 -24 -32 -12 -16 -18 -20 -22 -28 -32 -38 -46 -38 -16 -20 -20 -24 -28 -32 -38 -46 -24 -28 -32 -12 -16 -16 -24 -24 -32 -38 -46 -12 -16 -16 -12
-28 -30 -12 -16 -18 -20 -22 -28 -30 -38 -46 -11 -14 -16 -18 -18 -22 -26 -30 -12 -16 -18 -20 -22 -28 -32 -38 -46 -38 -16 -20 -22 -24 -28 -38 -38 -46 -26 -30 -32 -11 -14 -16 -22 -26 -30 -38 -46 -11 -14 -16 -12
-0630S -0648S -0622S -0622S -0622S -0630S -0648S -0648S -0648S -0648S -0664C -0622S -0622S -0622S -0633S -0630S -0648S -0648S -0648S -0622S -0622S -0622S -0630S -0648S -0648S -0664C -0648S -0664C -0648S -0622S -0648S -0648S -0648S -0648S -0648S -0648S -0664S -0648S -0648S -0648S -0622S -0622S -0622S -0648S -0648S -0648S -0648S -0664C -0622S -0622S -0622S -0622S
-381 -137 -171 -205 -239 -280 -357 -422 -508 -635 -137 -174 -205 -239 -280 -357 -445 -150 -190 -222 -266 -300 -381 -483 -635 -508 -205 -239 -280 -300 -381
-320 -381 -445 -137 -174 -205 -280 -357 -422 -483 -635 -127 -160 -205 -137
*Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used.
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
LOW & MEDIUM PRESSURE HOSE
-7S -8S -13S -2S -3S -5S -6S -7S -8S -15S -12S -1S -2S -3S -4S -4S -5S -6S -8S -13S -2S -3S -5S -6S -9S -10S -11S -12S -8S -3S -4S -5S -6S -7S -10S -10S -11S -6S -7S -9S -1S -2S -3S -5S -6S -8S -8S -12S -1S -2S -3S -13S
Firesleeve* 624 (dash size)
HIGH PRESSURE HOSE
-22 -22 -8 -10 -12 -16 -16 -22 -30 -30 -30 -6 -10 -10 -12 -12 -16 -22 -30 -8 -10 -12 -16 -16 -22 -30 -30 -30 -30 -12 -12 -16 -16 -22 -22 -30 -30 -16 -22 -22 -6 -10 -10 -16 -22 -30 -30 -30 -6 -10 -12 -8
Nylon Sleeve* FC425 (dash size)
HOSE FITTINGS
-7S -8S -1S -2S -14S -54S -5S -7S -9S -10S -13S -1S -2S -15S -4S -4S -5S -6S -9S -1S -1S -3S -54S -5S -7S -8S -10S -13S -8S -15S -3S -4S -5S -7S -8S -8S -13S -6S -7S -8S -1S -2S -15S -5S -7S -9S -8S -13S -1S -12S -14S -1S
Internal Support Coil
ADAPTERS & TUBE FITTINGS
Support Clamp 900729 (dash size)
ACCESSORIES & ASSEMBLY INSTRUCTIONS
Steel Prot. Coil Sleeve* 900705 (dash size)
HOSE ASSEMBLY EQUIPMENT
FC736-16 FC736-20 GH120-4 GH120-6 GH120-8 GH120-10 GH120-12 GH120-16 GH120-20 GH120-24 GH120-32 GH194-4 GH194-6 GH194-8 GH194-12 GH194-10 GH194-12 GH194-16 GH194-20 GH195-4 GH195-6 GH195-8 GH195-10 GH195-12 GH195-16 GH195-20 GH195-24 GH195-32 GH466-20 GH493-6 GH493-8 GH493-10 GH493-12 GH493-16 GH493-20 GH493-24 GH493-32 GH506-12 GH506-16 GH506-20 GH663-4 GH663-6 GH663-8 GH663-12 GH663-16 GH663-20 GH663-24 GH663-32 GH681-4 GH681-6 GH681-8 GH781-4
Plastic Coil Sleeve 900952 (dash size)
APPENDICIES
Part #
Steel Prot. Coil Spring* 900564 (dash size)
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Page 15 307
SPECIALTY & TRUCK HOSE
Accessories to Hose Chart
Part #
LOW & MEDIUM PRESSURE HOSE
GH781-6 GH781-8 GH781-10 GH781-12 GH781-16 GH781-20 GH781-24 GH781-32 GH793-4 GH793-6 GH793-8 GH793-10 GH793-12 GH793-16 GH793-20 GH793-24 GH793-32
HIGH PRESSURE HOSE
Steel Prot. Coil Spring* 900564 (dash size)
Plastic Coil Sleeve 900952 (dash size)
Steel Prot. Coil Sleeve* 900705 (dash size)
Support Clamp 900729 (dash size)
-2S -14S -4S -5S -7S -7S -8S -13S -1S -15S -3S -4S -5S -7S -8S -10S -13S
-10 -12 -12 -16 -22 -22 -30 -30 -8 -10 -12 -16 -16 -22 -30 -30 -30
-2S -3S -5S -14S -7S -9S -8S -12S -13S -2S -3S -5S -6S -9S -10S -10S -12S
-3 -5 -6 -9 -10 -12 -13 -30 -2 -4 -5 -6 -9 -10 -12 -13 -30
Internal Support Coil
Nylon Sleeve* FC425 (dash size)
Firesleeve* 624 (dash size)
Firesleeve Clamp FF9217 (dash size)
Heavy Duty Support Clamp FF9031 (dash size)
-16 -16 -20 -24 -24 -28 -38 -46 -12 -16 -16 -20 -20 -24 -32 -38 -46
-16 -18 -18 -22 -28 -28 -38 -46 -12 -16 -18 -20 -22 -28 -32 -38 -46
-0622S -0622S -0630S -0648S -0648S -0648S -0648S -0664C -0622S -0622S -0622S -0630S -0648S -0648S -0664C -0648S -0664C
-174 -205 -239 -280 -357 -422 -508 -635 -150 -190 -222 -266 -300 -381 -483 -635
HOSE FITTINGS ADAPTERS & TUBE FITTINGS ACCESSORIES & ASSEMBLY INSTRUCTIONS HOSE ASSEMBLY EQUIPMENT APPENDICIES *Sizes indicated are based on Hose O.D. only. If sleeve is to be placed over fittings, a larger sleeve size may be required, depending on type of fitting used. 308
EATON Aeroquip Fluid Conveyance Products A-HOOV-MC001-E1 March 2011
Page 16