7069-E (08-12-2015)
Table of CONTENTS SECTION 1 : NATURAL (NR)........................................................1.
SECTION 7 : FABRIC REINFORCED RUBBER...........................7.
AB-131......................................................................................1.1 AB-135......................................................................................1.2 AB-138......................................................................................1.3 AB-139 - BLAST........................................................................1.4 AB-148......................................................................................1.5
C.I. PACKING AB-951......................................................................................7.1 IM-950.......................................................................................7.2 AB-984......................................................................................7.3 AB-2102....................................................................................7.4 IM-2100.....................................................................................7.5 DIAPHRAGM AB-3205....................................................................................7.6 AB-3210....................................................................................7.7 AB-3220....................................................................................7.8 AB-3228....................................................................................7.9 AB-3275..................................................................................7.10 AB-3560..................................................................................7.11
SECTION 2 : SBR (Packing and Skirtboard)...............................2. IM-165.......................................................................................2.1 IM-166.......................................................................................2.2 AB-613......................................................................................2.3 AB-617......................................................................................2.4 IM-618.......................................................................................2.5 AB-619......................................................................................2.6
SECTION 8 : SPECIALTY PRODUCTS.........................................8.
SECTION 3 : NEOPRENE..............................................................3.
DURASHIELD AB-140......................................................................................8.1 COMMERCIAL GRADE SATIN FINISH AB-142......................................................................................8.2 AB-250......................................................................................3.1 AB-144......................................................................................8.3 AB-260......................................................................................3.2 AB-146......................................................................................8.4 AB-270......................................................................................3.3 AB-147......................................................................................8.5 COMMERCIAL GRADE SMOOTH FINISH AB-148......................................................................................8.6 IM-252.......................................................................................3.4 AB-160......................................................................................8.7 IM-262.......................................................................................3.5 AB-162......................................................................................8.8 IM-272.......................................................................................3.6 AB-940......................................................................................8.9 INDUSTRIAL GRADE SMOOTH FINISH A+............................................................................................8.10 AB-245......................................................................................3.7 A+ 1 BONDING LAYER..........................................................8.11 AB-255......................................................................................3.8 SKIRT-SHIELD AB-265......................................................................................3.9 AB-140.....................................................................................8.12 AB-275....................................................................................3.10 A+............................................................................................8.13 AB-285....................................................................................3.11 NSF/ANSI 61 CERTIFIED PREMIUM GRADE AB-576....................................................................................8.14 AB-253....................................................................................3.12 TRANSEAL AB-263....................................................................................3.13 TG-65......................................................................................8.15 AB-273....................................................................................3.14 AASHTO GRADE AB-289....................................................................................3.15 AB-168....................................................................................8.16 AB-258....................................................................................8.17 SECTION 4 : NITRILE....................................................................4. AB-268....................................................................................8.18 AB-278....................................................................................8.19 AB-344......................................................................................4.1 U.S. MILITARY SPECIFICATION GRADE AB-364......................................................................................4.2 MIL-PRF-1149 TYPE 1, CLASS 1..........................................8.20 AB-355......................................................................................4.3 MIL-PRF-1149 TYPE 1, CLASS 2..........................................8.21 AB-365......................................................................................4.4 MIL-PRF-1149 TYPE 2, CLASS 1..........................................8.22 AB-375......................................................................................4.5 MIL-PRF-1149 TYPE 2, CLASS 2..........................................8.23 AB-366......................................................................................4.6 MIL-6855 CLASS 2, GRADE 60.............................................8.24 BLAST SECTION 5 : BUTYL......................................................................5. AB-139 - BLAST......................................................................8.25 AB-465......................................................................................5.1 APPENDICES SECTION 6 : EPDM.......................................................................6. AB-553......................................................................................6.1 AB-563......................................................................................6.2 AB-566......................................................................................6.3
APPENDIX 1 - METRIC CONVERSION CHART APPENDIX 2 - RMA COMMERCIAL GAUGE TOLERANCES APPENDIX 3 - ASTM GRADE APPENDIX 4 - PRODUCT COMPARISON CHART APPENDIX 5 - RUBBER SHELF LIFE APPENDIX 6 - CONTACTS
AB = AB Spec (Domestic Products) IM = AB Import
7069-E (24/11/2015)
·
American Biltrite manufactures one of the widest selections of performance sheet rubber products in the industry destined for various industrial applications. Whether you are looking for the ultimate fusion of abrasion, tear and wear resistant rubber or premium quality sheet rubber in a broad range of elastomers, widths, sizes and gauges, American Biltrite has it all. With an outstanding range of polymers, on-site mixing, state-of-the-art curing, fully equipped testing facilities and a ISO 9001 certification, we have the expertise and a quality system to provide the exact solution for your application. American Biltrite is well known on the market for their AB Spec Products manufactured in Sherbrooke and we now also offer import products known as the IM series (AB Import). With inventory in 6 locations in the U.S. and 2 in Canada, we can deliver the products you need, when you need them. Our team of 250 experienced, talented employees are committed to customer satisfaction and delivering quality products. Equipped with one of the most complete compounding facilities in North America and backed by a 100-year reputation for rubber product excellence, we’re convinced American Biltrite is your custom mixing source. In-house formulations are maintained for thousands of compounds covering all standard polymers. Choose from any of these mixes, or work with our experienced technicians to develop compounds with properties that precisely match your specific requirements. You are assured of consistent, reliable mixing that meets the most demanding quality standards.
7069-E (14-12-2012)
ASTM ASTM’s rubber standards are instrumental in specifying, testing, and assessing the physical, ·mechanical, and chemical properties of a wide variety of materials and products that are made of rubber
and its elastomeric derivatives. Rubber, which can either be synthetically produced or derived from the milky colloidal suspension found in the sap of some plants, exhibits unique properties that render it extensively useful in many applications and products. These rubber standards allow rubber manufacturers and end-users to examine and evaluate their material or product of concern to ensure quality and acceptability towards safe utilization.
ANSI / ASTM D 2000 American National Standards Institute American Society for testing and Materials
To assure that you get what you pay for, buy rubber by the foot or yard, not by the pound. You get more material for the money and the best yield. Remember, rubber polymers weigh less than a lot of cheaper fillers like calcium carbonate or clay.
Are you rubber products meeting these standards or are you GUIDELINES TO USE WHEN BUYING creating possible problems for you and your company ? RUBBER PRODUCTS ANSI / ASTM standards give you the assurance you are Use ANSI / ASRM D 2000 Standards when ordering rubber receiving the quality you deserve. products and be sure you verify these standards with Know what you’re buying in a global economy. your supplier.
· · ·
Do you know that some products like commercial grade Buy rubber products by the foot or yard for better yields. neoprene can contain very little neoprene and in some cases Be sure to verify pounds vs. yields with your supplier. no neoprene at all ? If the price is extremely low, it’s more Buy from American Biltrite than likely you’re not getting what you really want or need. 1 888 275-7075 Phone / 1 877 271-1751 Fax
ASTM D 2000 Line Callout Basic Requirements Suffix Requirements
M 2 B G 5 10 EO 3 4 A temperature of test - in this example, 212˚F (100˚C) A method of test - in this example, ASTM D 471, ASTM No. 903 oil, 70 hours Additional requirement - in this example, fluid resistance Tensile strength - in this example, 1000 psi (6.89 MPa) Hardness - in this example, 50 ± 5 using a Shore A durometer Class of oil resistance - in this example, a maximum volume swell of 40% in ASTM No. 903 oil Type of heat resistance - in this example, 212˚F (100˚C) Grade number - used only when requirements are needed in addition to basic requirements Only used when specification is based on SI units of measure
For more information, please refer to appendix 3. 7069-E (04-03-2011)
Section 1 Natural (NR) advantages
· High tensile strength · Superior resistance to tear and abrasion · Excellent rebound elasticity (snap) · Good flexibility at low temperatures · Excellent adhesion to fabric and metal when properly prepared
limitations
· Poor resistance to heat, ozone and sunlight · Very little resistance to oil, gasoline and hydrocarbon solvents
APPLICATIONS*
· Where abrasion resistance and rebound are critical · Cement sleeves, chute linings · Low temperature use · Hose · Tank lining · Cyclones · Concentrators
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
1.
7069-E (04-03-2011)
Natural (NR) AB-131 features tensile strength · High tear & abrasion resistant · Cut, elasticity · Rebound Flexibility · Adhesion and metal · Softer feeltoforfabric · ASTM Grade squeegee ·
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
135-08-482
1/8 (3.7)
48 (1219.2)
320 (29.73)
80 (24.39)
208 (94.3)
135-12-482
3/16 (4.76)
48 (1219.2)
240 (22.3)
60 (18.29)
235 (106.6)
135-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
205 (93)
135-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
235 (106.6)
1
Made to order.
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1.1
7069-E 7067-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-131 SPECIFICATION ASTM D2000 : 2AA325A13F17Z1 POLYMER : Natural Rubber (NR)
ASTM
Z1 = HARDNESS 35 ± Shore A
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.00
D2240
HARDNESS (Shore A)
35
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
500 min.
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 5 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Minimum piece length : 10’ Width tolerance : -0 / +1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7067-E (14-12-2012))
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
natural (NR) AB-135 features tensile strength · Superior tear and abrasion resistant · Cut, elasticity (snap) · Rebound · Flexibility proper preparation, good adhesion · With to fabric and metal · ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Tan
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
127-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
98 (44.5)
127-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
130 (59)
127-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
113 (51.3)
127-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
149 (67.6)
127-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
98 (44.5)
127-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
130 (59)
127-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.2)
125 (56.7)
127-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.2)
167 (75.8)
127-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.2)
156 (70.8)
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
208 (94.3)
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
176 (79.8)
127-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
234 (106.1)
127-32-362
1/2 (12.70)
36 (914.4)
150 (13.93)
50 (15.24)
397 (180.1)
127-32-482
1/2 (12.70)
48 (1219.2)
200 (18.58)
50 (15.24)
529 (240)
127-48-362 1
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
352 (159.7)
127-48-488 1
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
469 (212.7)
127-64-368
11 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
474 (215)
127-16-482 127-24-362
1
1
Made to order.
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1.2
7069-E 7003-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-135 SPECIFICATION ASTM D2000 : 2aa425a13f17 POLYMER : Natural Rubber (NR) (Tan)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.06
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
400 min.
DIN ABRASION
Wet: 39 mm3 Dry: 176 mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / +1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7003-E (14-12-2012))
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Natural (NR) AB-138 features Superior tensile strength · Tear and abrasion resistant · Rebound · Flexibility elasticity (snap) · With proper preparation, good adhesion · to fabric and metal Easier buffing · ASTM · Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Beige
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
128-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
108 (49)
128-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
144 (65.3)
128-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
129 (58.5)
128-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
172 (78)
128-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
108 (49)
128-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
144 (65.3)
128-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
140 (63.5)
128-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
186 (84.4)
128-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
173 (78.5)
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
231 (104.8)
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
195 (88.5)
128-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
260 (117.9)
128-32-362
1/2 (12.70)
36 (914.4)
150 (13.93)
50 (15.24)
439 (199.1)
128-32-482
1/2 (12.70)
48 (1219.2)
200 (18.58)
50 (15.24)
586 (265.8)
128-40-362 1
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
328 (148.8)
128-40-482 1
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
438 (198.7)
128-48-362
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
389 (176.5)
128-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
519 (235.4)
128-64-362
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
525 (238.1)
128-16-482 128-24-362
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1.3
7069-E 7064-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-138 SPECIFICATION ASTM D2000 : 2aa420a13f17 POLYMER : Natural Rubber Blend (Beige)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.14
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
2000 min.
ULTIMATE ELONGATION (%)
400 min.
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / +1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7064-E (14-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
natural (nr) AB-139 BLAST features Specifically designed for ballistic · applications all types of ranges, curtain · orIdealwallforapplications self-healing qualities · Has Less airborne lead dust & diminishes · dangerous ricochet · ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
141-08-3621
1/8 (3.7)
36 (914.4)
120 (11.15)
40 (12.2)
86 (39.1)
141-08-482
1/8 (3.7)
48 (1219.2)
160 (14.86)
40 (12.2)
111 (50.3)
141-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
222 (100.7)
141-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.1)
260 (117.9)
141-32-482
1/2 (12.7)
48 (1219.2)
200 (18.58)
50 (15.24)
586 (265.8)
1
Made to order
BLAST.AMERICAN-BILTRITE.COM WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1.4
7069-E 7068-E (24-03-2015)
natural (nr) TECHNICAL SPECIFICATIONS AB-139 SPECIFICATION ASTM D2000 : 2AA420A13F17 POLYMER : Natural Rubber (NR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.14
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
2000 min.
ULTIMATE ELONGATION (%)
400 min.
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 5 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / +1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
BLAST.AMERICAN-BILTRITE.COM WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7069-E 7068-E (24-03-2015)
Natural (NR) AB-148 durashield features to meet the requirements · Designed of the squeegee/floor care market tensile, cut & tear resistant · High abrasion resistance · Excellent in both wet and dry conditions · ASTM Grade
GRADE
Specialty
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
149-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
129 (58.5)
149-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.2)
157 (71.2)
149-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
205 (93)
149-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
235 (106.6)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1.5
7069-E 7094-E (22-07-2015)
TECHNICAL SPECIFICATIONS AB-148 SPECIFICATION ASTM D2000 : 2AA325A13F17Z1 POLYMER : Natural Rubber (NR)
ASTM
Z1 = 37 Durometer
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.05
D2240
HARDNESS (Shore A)
37 +/- 5
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
400 min.
D624
TEAR Die C (lbs/in)
200 nom.
D1630
NBS ABRASION
65% nom
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7094-E (22-07-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 2 sbr (packing and skirtboard) advantages
· Excellent impact strength · Very good resilience · Tensile strength · Abrasion resistance and flexibility at low temperatures
limitations
· Poor resistance to ozone and sunlight · Very little resistance to oil, gasoline and hydrocarbon solvents
APPLICATIONS*
· Bulk and non-critical applications · Basic gaskets and washers · Hose · Skirtboards, scrapers · Grade II industrial belting
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
2.
7069-E (04-03-2011)
SBR (packing/skirtboard) IM-165 skirtboard features resistance 路Abrasion 路Flexibility 路Excellent for skirtboard applications
GRADE
Commodity
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
163-66-084 163-66-104
GAUGE IN (MM) 1 1/2 (38) 1 1/2 (38)
WIDTH IN (MM) 8 (203.2) 10 (254)
SURFACE/ROLL SFT (M2) 50 (4.645) 50 (4.645)
LENGTH/ROLL LFT (M) 50 (15.24) 50 (15.24)
WEIGHT/ROLL LBS (KG) 377 (171.1) 471 (213.6)
163-66-124
1 1/2 (38)
12 (304.8)
50 (4.645)
50 (15.24)
565 (256.3)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
2.1
7069-E 7091-E (15-05-2014
TECHNICAL SPECIFICATIONS IM-165 SPECIFICATION ASTM D2240 HARDNESS 60 ±7 (Shore A) POLYMER : Styrene-Butadiene (SBR) ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
1000 Nominal
ULTIMATE ELONGATION (%)
300
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 1 Width tolerance : +/- 0.177’’ Length tolerance : -0 / +6’’ Durometer tolerance:± 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7091-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SBR (packing/skirtboard) IM-166 skirtboard features resistant 路Abrasion 路Flexibility 路Excellent for skirtboard applications
GRADE
Industrial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
166-04-484 166-08-364 1 166-08-484 166-08-724 1 166-16-034 1 166-16-044 166-16-064 166-16-084 166-16-104 1 166-16-124 166-16-484 166-24-034 1 166-24-044 166-24-054 1 166-24-064 166-24-084 166-24-104 1 166-24-124 166-24-484 166-32-034 1 166-32-044 166-32-064 166-32-084 166-32-104 166-32-124 1
GAUGE IN (MM) 1/16 (1.59) 1/8 (3.7) 1/8 (3.7) 1/8 (3.7) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 3/8 (9.52) 1/2 (12.70) 1/2 (12.70) 1/2 (12.70) 1/2 (12.70) 1/2 (12.70) 1/2 (12.70)
WIDTH IN (MM) 48 (1219.2) 36 (914.4) 48 (1219.2) 72 (1828.8) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 48 (1219.2) 3 (76.2) 4 (101.6) 5 (127) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 48 (1219.2) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8)
SURFACE/ROLL SFT (M2) ---------------------------------------------------
Black
LENGTH/ROLL LFT (M) 100 (30.49) 50 (15.24) 50 (15.24) 35 (10.7) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24)
WEIGHT/ROLL LBS (KG) 171(77.6) 147 (66.7) 205 (93) 215 (97.5) 25 (11.1) 28 (12.5) 41 (18.7) 55 (25) 81 (36.6) 83 (37.5) 330 (149.9) 34 (15.5) 46 (20.7) 57 (25.9) 61 (27.8) 91 (41.4) 111 (50.5) 137 (62.1) 490 (222.5) 45 (20.2) 55 (24.8) 82 (37.2) 109 (49.5) 137 (61.9) 164 (74.3)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
2.2
7069-E 7006-E (22-12-2015)
166-32-484 166-48-034 1 166-48-044 1 166-48-064 166-48-084 166-48-104 1 166-48-124 166-48-484
1/2 (12.70) 3/4 (19.00) 3/4 (19.00) 3/4 (19.00) 3/4 (19.00) 3/4 (19.00) 3/4 (19.00) 3/4 (19.00)
48 (1219.2) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 48 (1219.2)
-----------------
50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24)
655 (297.3) 70 (31.9) 94 (42.6) 123 (55.9) 188 (85.1) 205 (93.2) 282 (127.7) 986 (447.2)
166-64-034
1 (25.40)
3 (76.2)
---
50 (15.24)
89 (40.4)
1 (25.40)
4 (101.6)
---
50 (15.24)
109 (49.7)
1 (25.40) 1 (25.40) 1 (25.40) 1 (25.40) 1 (25.40)
6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 48 (1219.2)
-----------
50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24) 50 (15.24)
164 (74.3) 238 (107.8) 297 (134.8) 357 (161.9) 1311 (594.7)
1-1/4 (31.75)
3 (76.2)
---
50 (15.24)
104 (47.4)
166-64-044 1 166-64-064 166-64-084 166-64-104 166-64-124 166-64-484
166-65-034 1 166-65-044 1
1-1/4 (31.75)
4 (101.6)
---
50 (15.24)
139 (63.1)
166-65-064 1
1-1/4 (31.75)
6 (152.4)
---
50 (15.24)
209 (94.7)
166-65-084 1 166-65-104 1
1-1/4 (31.75)
8 (203.2)
---
50 (15.24)
278 (126.3)
1-1/4 (31.75)
10 (254)
---
50 (15.24)
348 (157.9)
166-65-124 1 166-65-484 1
1-1/4 (31.75)
12 (304.8)
---
50 (15.24)
418 (189.5)
1-1/4 (31.75)
48 (1219.2)
---
50 (15.24)
1670 (757.5)
166-66-034 1
1-1/2 (38.10)
3 (76.2)
---
50 (15.24)
127 (57.6)
166-66-044 1 166-66-064 1
1-1/2 (38.10)
4 (101.6)
---
50 (15.24)
169 (76.7)
1-1/2 (38.10)
6 (152.4)
---
50 (15.24)
292 (132.5)
166-66-084
1-1/2 (38.10)
8 (203.2)
---
50 (15.24)
328 (148.7)
166-66-104
1-1/2 (38.10)
10 (254)
---
50 (15.24)
410 (185.9)
166-66-124
1-1/2 (38.10)
12 (304.85)
---
50 (15.24)
492 (223)
166-66-484 1 166-68-484 1
1-1/2 (38.10) 2 (50.8)
48 (1219.2) 48 (1219.2)
-----
50 (15.24) 50 (15.24)
1966 (892) 2622 (1189.5)
1
Made to order
TECHNICAL SPECIFICATIONS IM-166 SPECIFICATION ASTM D2240 HARDNESS: 60 ±7 (Shore A) POLYMER: Styrene-Butadiene (SBR) ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
500 Nominal
ULTIMATE ELONGATION (%)
300
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 1 Width tolerance : +/- 0.177’’ Length tolerance : -0 / +6’’ Durometer tolerance:± 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7006-E (22-12-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SBR (packing/skirtboard) AB-613 features Premium SBR for industrial gaskets 路 ASTM 路 Grade
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
109-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
164 (74.4)
109-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
218 (98.9)
109-08-362 1
1/8 (3.7)
36 (914.4)
195 (18.11)
65 (19.81)
209 (94.8)
109-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
214 (97.1)
109-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
193 (87.5)
109-16-362 1
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
257 (116.6)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
2.3
7069-E 7034-E (28-02-2013)
TECHNICAL SPECIFICATIONS AB-613 SPECIFICATION ASTM D1330-85 Grade 1 and 2 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.65
D2240
HARDNESS (Shore A)
70 - 85
D412
TENSILE (psi)
700 min.
ULTIMATE ELONGATION (%)
150 min.
D395B
COMPRESSION SET
22 hrs @ 700C 40% max.
D573
HEAT AGING
94 hrs @ 700C Changed Tensile: - 25% max. Elongation: -25% max.
TEMPERATURE RANGE (general guideline)
-200 to 2000 F -290 to 930C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Durometer tolerance: +5 -10 max. Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7034-E (28-02-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SBR (packing/skirtboard) AB-617 features Industrial SBR for gaskets 路 ASTM 路 Grade
GRADE
Industrial
FINISH
Satin (Both sides) // ** Smooth
POWDER
No
TRIMMED
No
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
311-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
124 (56.2)
311-04-482 1
1/16 (1.59)
48 (1219.2
400 (37.16)
100 (30.48)
165 (74.8)
311-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
147 (66.7)
311-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
133 (60.3)
311-08-482 1
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
177 (80.3)
311-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
155 (70.3)
311-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
206 (93.4)
311-16-36S**
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
218 (98.9)
311-16-48S**
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.668)
254 (115.2)
1
Made to order ** Smooth finish
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
2.4
7069-E 7035-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-617 SPECIFICATION ASTM D2000 : 1AA805 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.51
D2240
HARDNESS (Shore A)
80
D412
TENSILE (psi)
500 min.
ULTIMATE ELONGATION (%)
100 min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0.5 / + 1’’ Length tolerance : +/- 10% Meet FMVSS302 «Specimens did not ignite or were self extinguishing» Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7035-E (14-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SBR (packing/skirtboard) im-618 features
路 Industrial blend SBR for gaskets
GRADE
Industrial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
110-04-368
1/16 (1.59)
36 (914.4)
210 (19.51)
70 (21.33)
119 (54)
110-04-488
1/16 (1.59)
48 (1219.2)
200 (18.58)
50 (15.24)
113 (51.3)
110-04-728 1
1/16 (1.59)
72 (1828.8)
420 (39.02)
70 (21.33)
222 (100.8)
110-06-368 1
3/32 (2.38)
36 (914.4)
165 (15.33)
55 (16.76)
140 (63.5)
110-06-488 1
3/32 (2.38)
48 (1219.2)
160 (14.86)
40 (12.19)
136 (61.7)
110-06-728 1
3/32 (2.38)
72 (1828.8)
330 (30.66)
55 (16.76)
262 (118.9)
110-08-368
1/8 (3.7)
36 (914.4)
105 (9.75)
35 (10.66)
119 (54)
110-08-488
1/8 (3.7)
48 (1219.2)
100 (9.29)
25 (7.62)
113 (51.3)
110-08-728
1/8 (3.7)
72 (1828.8)
210 (19.51)
35 (10.66)
222 (100.7)
110-12-368 1
3/16 (4.76)
36 (914.4)
150 (13.93)
50 (15.24)
254 (115.2)
110-12-488
1
3/16 (4.76)
48 (1219.2)
140 (13)
35 (10.66)
237 (107.5)
110-12-728 1
3/16 (4.76)
72 (1828.8)
150 (13.93)
25 (7.62)
238 (108)
110-16-368
1/4 (6.35)
36 (914.4)
105 (9.75)
35 (10.66)
237 (107.5)
110-16-488
1/4 (6.35)
48 (1219.2)
100 (9.29)
25 (7.62)
226 (102.5)
110-16-728 1
1/4 (6.35)
72 (1828.8)
120 (11.15)
20 (6.09)
254 (115.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
1 888-275-7075
2.5
7069-E 7036-E (15-05-2014)
TECHNICAL SPECIFICATIONS IM-618 SPECIFICATION ASTM D2240 HARDNESS 75 ±7 (Shore A) POLYMER : Styrene-Butadiene (SBR) (Red)
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
75
D412
TENSILE (psi)
400 nom.
ULTIMATE ELONGATION (%)
220 nom.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : -0 / + 6’’ Durometer tolerance:± 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7036-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SBR (packing/skirtboard) AB-619 features Industrial SBR for gaskets 路 ASTM 路 Grade
GRADE
Industrial
FINISH
Fabric (Both Sides)
POWDER
No
TRIMMED
No
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
261-04-362
1/16 (1.59)
36 (914.4)
330 (30.66)
110 (33.53)
165 (74.8)
261-04-366
1/16 (1.59)
36 (914.4)
200 (18.58)
66.6 (20.3)
100 (45.4)
261-04-482
1/16 (1.59)
48 (1219.2)
320 (29.73)
80 (24.38)
160 (72.6)
261-04-486 1
1/16 (1.59)
48 (1219.2)
200 (18.58)
50 (15.24)
103 (46.7)
261-06-362
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
178 (80.7)
261-06-366 1
3/32 (2.38)
36 (914.4)
126 (11.7)
42 (12.8)
100 (45.4)
261-06-482 1
3/32 (2.38)
48 (1219.2)
220 (20.43)
55 (16.76)
174 (78.9)
261-08-362
1/8 (3.7)
36 (914.4)
165 (15.33)
55 (16.76)
177 (80.3)
261-08-366
1/8 (3.7)
36 (914.4)
96 (8.91)
32 (9.75)
100 (45.4)
261-08-482
1/8 (3.7)
48 (1219.2)
160 (14.86)
40 (12.19)
171 (77.6)
261-08-486
1/8 (3.7)
48 (1219.2)
94 (8.73)
23.5 (7.16)
101 (45.8)
261-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
188 (85.3)
261-12-366 1
3/16 (4.76)
36 (914.4)
59 (5.48)
19.6 (5.97)
92 (41.7)
261-12-482
3/16 (4.76)
48 (1219.2)
120 (11.15)
30 (9.14)
187 (84.8)
261-16-362
1/4 (6.35)
36 (914.4)
90 (8.36)
30 (9.14)
193 (87.5)
261-16-366
1/4 (6.35)
36 (914.4)
46 (4.27)
15 (4.57)
100 (45.4)
261-16-482
1/4 (6.35)
48 (1219.2)
80 (7.43)
20 (6.09)
171 (77.6)
261-16-486 1
1/4 (6.35)
48 (1219.2)
46 (4.27)
11.5 (3.5)
98 (44.5)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
2.6
7069-E 7037-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-619 SPECIFICATION ASTM D2000 : 1AA806Z1 POLYMER : Styrene-Butadiene (SBR)
ASTM
Z1 = HARDNESS 75 ± 5 (Shore A)
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.8
D2240
HARDNESS (Shore A)
75
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
100 min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 2 (100 pound rolls = 1 piece) Minimum piece length : 5’ Width tolerance : -0.5 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7037-E (14-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 3 neoprene (CR) advantages
· Good inherent flame resistance · Moderate resistance to oil and gasoline · Excellent adhesion to fabrics and metals · Very good resistance to weather, ozone and natural aging · Good resistance to abrasion and flex cracking · Very good resistance to alkalis and acids
* Make sure to check specification of product as there is a variety of grades in neoprenes.
limitations
· Poor to fair resistance to aromatic and oxygenated solvents · Limited ability at low temperatures
APPLICATIONS*
· Where mild oil resistance and weathering properties are both required · Gaskets and washers · Seals for doors and windows · Hose for steam, garden or radiator · Wire and cable
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
3.
7069-E (14-12-2012)
neoprEne (CR) AB-250 COMMERCIAL GRADE SATIN FINISH features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Commercial
FINISH
Satin (Both Sides)
POWDER
No
TRIMMED
No
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
235-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
120 (54.4)
235-04-482
1/16 (1.59)
48 (1219.2)
400 (37.15)
100 (30.48)
160 (72.6)
235-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
145 (65.8)
235-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
126 (57.2)
235-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
168 (76.2)
235-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
153 (69.4)
235-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.85)
40 (12.19)
204 (92.5)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.1
7069-E 7009-E (14-12-2012)
TECHNICAL SPECIFICATIONS AB-250 SPECIFICATION ASTM D2000 : 1BC506 POLYMER : CR/SBR/NBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.45
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0.5 /+ 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7009-E (14-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (CR) AB-260 COMMERCIAL GRADE SATIN FINISH features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Commercial
FINISH
Satin (Both Sides)
POWDER
No
TRIMMED
No
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
266-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
125 (56.7)
266-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
167 (75.8)
266-06-362
3/32 (2.38)
36 (914.4)
225 (20.91)
75 (22.85)
148 (67.1)
266-06-482
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
197 (89.4)
266-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
133 (60.3)
266-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
177 (80.3)
266-08-518 1
1/8 (3.7)
51 (1295.4)
213 (19,79)
50 (15.24)
187 (84.9)
266-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
156 (70.8)
266-12-482
3/16 (4.76)
48 (1219.2)
160 (14.85)
40 (12.19)
207 (93.9)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.2
7069-E 7010-E (20-12-2012)
TECHNICAL SPECIFICATIONS AB-260 SPECIFICATION ASTM D2000 : 1BC606 POLYMER : CR/SBR/NBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.48
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0.5 /+ 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7010-E (20-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (CR) AB-270 COMMERCIAL GRADE SATIN FINISH features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM grade
GRADE
Commercial
FINISH
Satin (Both Sides)
POWDER
No
TRIMMED
No
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
277-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
126 (57.2)
277-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
169 (76.7)
277-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
203 (92.1)
277-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
135 (61.2)
277-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
180 (81.6)
277-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
159 (72.1)
277-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
211 (95.7)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.3
7069-E 7011-E (29-08-2012)
TECHNICAL SPECIFICATIONS AB-270 SPECIFICATION ASTM D2000 : 1BC706 POLYMER : CR/SBR/NBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.51
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
200 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0.5 /+ 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7011-E (29-08-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (CR) IM-252 COMMERCIAL GRADE PLATE FINISH features aging to alkalis and acids 路 Natural Good resistance to abrasion 路 and flex cracking
GRADE
Commercial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
201-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
170 (77.3)
201-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
170 (77.3)
201-12-482
3/16 (4.76)
48 (1219.2)
160 (14.85)
40 (12.19)
204 (92.8)
201-16-482
1/4 (6.35)
48 (1219.2)
160 (14.85)
40 (12.19)
273 (123.7)
201-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
304 (137.7)
201-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
406 (184.1)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.4
7069-E 7012-E (15-05-2014)
TECHNICAL SPECIFICATIONS IM-252 SPECIFICATION ASTM D2240 POLYMER : Neoprene® (CR) Blend
HARDNESS 50 ±7 (Shore A)
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
500 nom.
ULTIMATE ELONGATION (%)
300 nom.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Width tolerance : +/- 0.5’’ Length tolerance : +/- 10% Durometer tolerance : +/- 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7012-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (cr) IM-262 COMMERCIAL GRADE PLATE FINISH features aging to alkalis and acids 路 Natural 路 Good resistance to abrasion and flex cracking
GRADE
Commercial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
202-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
143 (64.6)
202-04-482
1/16 (1.59)
48 (1219.2)
400 (37.15)
100 (30.48)
190 (86.2)
202-06-362
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
160 (72.8)
202-06-482
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
214 (97)
202-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
143 (64.7)
202-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
190 (86.3)
202-08-722
1/8 (3.7)
72 (1828.8)
210 (19.51)
35 (10.66)
200 (90.6)
202-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
171 (77.6)
202-12-482
3/16 (4.76)
48 (1219.2)
160 (14.85)
40 (12.19)
228 (103.5)
202-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
228 (103.5)
202-16-482
1/4 (6.35)
48 (1219.2)
160 (14.85)
40 (12.19)
304 (138)
202-16-722
1/4 (6.35)
72 (1829)
240 (22)
40 (12.19)
434 (196.9)
202-24-362
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
254 (115.2)
202-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
339 (153.6)
202-32-362
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
339 (153.6)
202-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
453 (205.3)
202-40-362
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
425 (192.8)
202-40-482
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
567 (257.1)
202-48-362
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
511 (231.5)
202-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
681 (308.8)
202-64-362
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
679 (308)
202-64-482
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
755 (342.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.5
7069-E 7013-E (15-05-2014)
TECHNICAL SPECIFICATIONS IM-262 SPECIFICATION ASTM D2240 POLYMER : Neoprene® (CR) Blend
HARDNESS 60 ±7 (Shore A)
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
500 nom.
ULTIMATE ELONGATION (%)
300 nom.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Width tolerance : +/- 0.5’’ Length tolerance : +/- 10% Durometer tolerance:± 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7013-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (CR) IM-272 COMMERCIAL GRADE PLATE FINISH features aging to alkalis and acids 路 Natural 路 Good resistance to abrasion and flex cracking
GRADE
Commercial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
203-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
148 (67)
203-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
197 (89.3)
203-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
161 (73)
203-06-482
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
221 (100.3)
203-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
147 (66.9)
203-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
197 (89.2)
203-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
177 (80.3)
203-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
236 (107)
203-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
236 (107)
203-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
315 (142.8)
203-24-362
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
263 (119.2)
203-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
350 (158.9)
203-32-362
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
351 (159.3)
203-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
468 (212.4)
203-40-362
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
366 (166.2)
203-40-482
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
489 (221.6)
203-48-362
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
528 (239.6)
203-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
704 (319.5)
203-64-362
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
702 (318.6)
203-64-482
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
781 (354)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.6
7069-E 7014-E (10-09-2015)
TECHNICAL SPECIFICATIONS IM-272 SPECIFICATION ASTM D2240 HARDNESS 70 ±7 (Shore A) POLYMER : Neoprene® (CR) Blend
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
500 nom.
ULTIMATE ELONGATION (%)
200 nom.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Width tolerance : +/- 0.5’’ Length tolerance : +/- 10% Durometer tolerence : +/- 7 Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7014-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (CR) AB-245 industrial grade plate finish features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural 路 Good resistance to flame, abrasion and flex cracking 路 ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
244-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
114 (51.7)
244-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
152 (68.9)
294-04-362 **
1/16 (1.59)
36 (914.4)
300 (27.9)
100 (30.48)
108 (49)
244-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
128 (58.1)
294-06-362 1 **
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
126 (58.1)
244-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
114 (51.7)
244-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
151 (68.5)
294-08-362 1 **
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
112 (50.8)
294-08-482 1 **
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
151 (68.5)
244-12-362
3/16 (4.76)
36 (914.4)
120 (11.2)
40 (12.2)
135 (61.2)
244-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.2)
180 (81.6)
294-12-362 1 **
3/16 (4.76)
36 (914.4)
120 (11.2)
40 (12.2)
135 (61.2)
244-16-362
1/4 (6.35)
36 (914.4)
120 (11.2)
40 (12.2)
182 (82.6)
244-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
242 (109.8)
294-16-362 1 **
1/4 (6.35)
36 (914.4)
120 (11.2)
40 (12.2)
179 (81.2)
244-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
202 (91.6)
244-24-482
3/8 (9.52)
48 (1219.2)
120 (11.2)
30 (9.14)
269 (122)
244-32-362 1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
269 (122)
244-32-482
1/2 (12.70)
48 (1219.2)
120 (11.2)
30 (9.14)
358 (162.4)
244-48-362 1
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
403 (182.8)
1
Made to order ** Powdered,
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.7
7069-E 7015-E (21-12-2012)
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
244-48-482 1
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
548 (248.6)
244-64-362 1
1 (25.4)
36 (914.4)
90 (8.36)
30 (9.14)
514 (233.1)
1
Made to order ** Powdered,
TECHNICAL SPECIFICATIONS AB-245 SPECIFICATION ASTM D2000 : 1BC410 POLYMER : CR/NBR/SBR ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.14
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
400 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7015-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (cr) AB-255 industrial grade plate finish features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
295-02-362 1 **
1/32 (0.79)
36 (914.4)
450 (41.8)
150 (45.7)
95 (43.1)
245-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
112 (50.8)
245-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
150 (68)
295-04-362 **
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
118 (53.5)
295-04-482 1 **
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
158 (71.7)
245-06-362
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
129 (58.5)
245-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
172 (78)
295-06-362 1 **
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.9)
143 (64.9)
245-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
112 (50.8)
245-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
150 (68)
1 **
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
115 (52.2)
295-08-482 1**
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
154 (69.9)
245-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
133 (60.3)
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
177 (80.3)
295-12-362 1 **
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
133 (60.3)
245-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
180 (81.6)
245-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
240 (108.9)
295-16-362 1 **
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
171 (77.6)
295-16-482 1 **
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
228 (103.4)
245-24-362
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
202 (91.6)
295-08-362
245-12-482
1
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.8
7069-E 7016-E (05-02-2013)
245-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
270 (122.5)
245-32-362
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
274 (124.3)
245-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
365 (165.6)
245-40-482 1
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
455 (206.4)
245-48-362 1
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
405 (183.7)
245-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
540 (244.9)
245-64-362 1
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
546 (247.7)
245-64-482
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
607 (275.3)
1
Made to order ** Powdered,
TECHNICAL SPECIFICATIONS AB-255 SPECIFICATION ASTM D2000 : 1BC510 POLYMER : NBR/SBR/CR ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.24
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 15% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7016-E (05-02-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (cr) AB-265 industrial grade plate finish features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
265-02-362 1
1/32 (0.79)
36 (914.4)
600 (56.74)
200 (60.96)
127 (57.6)
265-02-482
1/32 (0.79)
48 (1219.2)
800 (74.32)
200 (60.96)
170 (77.1)
296-02-362 **
1/32 (0.79)
36 (914.4)
600 (55.7)
200 (60.96)
127 (57.6)
296-02-482
1 **
1/32 (0.79)
48 (1219.2)
800 (74.3)
200 (60.96)
170 (77.1)
265-04-362
1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
129 (58.5)
265-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
172 (78)
296-04-362 **
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
132 (59.9)
296-04-482 **
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
175 (79.4)
265-06-362
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.9)
148 (67.1)
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.9)
197 (89.4)
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.9)
148 (67.1)
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
129 (58.5)
265-06-482 296-06-362
1 **
265-08-362 265-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
172 (78)
265-08-562
1
1/8 (3.7)
56 (1422)
374 (34.75)
62 (15.899)
323 (146.5)
265-08-602
1
1/8 (3.7)
60 (1524)
250 (23.22)
50 (15.24)
216 (98)
296-08-362
1 **
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
129 (58.5)
296-08-482 **
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
172 (78)
265-10-362
5/32 (3.96)
36 (914.4)
150 (13.93)
50 (15.24)
163 (73.9)
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
153 (69.4)
1
265-12-362 265-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
203 (92.1)
296-12-362
1 **
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
153 (69.4)
296-12-482
1 **
3/16 (4.76)
48 (1219.2)
160 (14.9)
40 (12.19)
203 (92.1)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.9
7069-E 7017-E (05-02-2013)
AB-265 industrial grade plate finish GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
265-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
207 (93.9)
265-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
276 (125.2)
296-16-362 1 **
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
207 (93.9)
296-16-482 **
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
276 (125.2)
265-20-482 1
5/16 (7.9)
48 (1219.2)
160 (14.86)
40 (12.19)
338 (153.2)
265-24-362
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
230 (104.3)
265-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
310 (140.6)
265-32-362
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
315 (142.9)
265-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
420 (190.5)
265-32-602
1
1/2 (12.70)
60 (1524)
150 (13.93)
30 (9.14)
525 (238.1)
265-40-362
1
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
393 (178.3)
265-40-482
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
524 (237.7)
265-48-362
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
466 (211.4)
265-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
621 (281.7)
265-64-362
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
628 (284.9)
265-64-482
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
698 (316.6)
1
Made to order ** Powdered,
7069-E 7017-E (05-02-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
TECHNICAL SPECIFICATIONS AB-265 SPECIFICATION ASTM D2000 : 1BC610 POLYMER : CR/NBR/SBR ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.32
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/32’’ = 3 pieces, 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Meet FMVSS302 «Specimens did not ignite or were self extinguishing» ASTM C1166, Flame Propagation with average flame propagation of 455 mm and did not drip flames* *Please verify that these meet your customers requirement Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7017-E (05-02-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (cr) AB-275 industrial grade plate finish features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
275-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
130 (59)
275-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
174 (78.9)
297-04-362 **
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
130 (59)
297-04-482 1 **
1/16 (1.59)
48 (1219.2)
400 (37.2)
100 (30.48)
174 (78.9)
275-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
149 (67.6)
275-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
199 (90.3)
297-06-362 1 **
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
156 (70.8)
275-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
130 (59)
275-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
174 (78.9)
297-08-362 1 **
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
138 (62.6)
297-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
184 (83.5)
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
154 (69.9)
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
205 (93)
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
166 (75.3)
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
208 (94.3)
1 **
275-12-362 275-12-482 297-12-362
1 **
275-16-362 275-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
278 (126.1)
1 **
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
208 (94.3)
297-16-482 1 **
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
277 (125.6)
275-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
235 (106.6)
275-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
313 (142)
297-16-362
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.10
7069-E 7018-E (05-02-2013)
275-32-362 1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
317 (143.8)
275-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
423 (191.9)
1
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
552 (250.4)
275-48-362 1
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
469 (212.7)
275-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
625 (283.5)
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
633 (287.1)
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
703 (318.9)
275-40-482
275-64-362 275-64-482 1
1
Made to order ** Powdered,
TECHNICAL SPECIFICATIONS AB-275 SPECIFICATION ASTM D2000 : 1BC710 POLYMER : CR/NBR/SBR ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.32
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
200 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7018-E (05-02-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (CR) ab-285 industrial grade plate finish features resistance to weather and ozone 路 Limited aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
285-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
141 (64)
285-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
189 (85.7)
298-04-362 **
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
141 (64)
285-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
212 (96.2)
285-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
143 (64.9)
285-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
190 (86.2)
285-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
172 (78)
285-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
230 (104.3)
285-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
228 (103.4)
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
304 (137.9)
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
228 (103.4)
285-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
257 (116.6)
285-24-482 1
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
342 (155.1)
285-32-362
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
342 (155.1)
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
456 (206.8)
285-48-362 1
3/4 (19.00)
36 (914.4)
90 (8.36)
30 (9.14)
513 (232.7)
285-48-482
3/4 (19.00)
48 (1219.2)
120 (11.15)
30 (9.14)
684 (310.3)
1 (25.40)
36 (914.4)
90 (8.36)
30 (9.14)
684 (310.3)
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
761 (345.2)
285-16-482 298-16-362
1 **
1
285-32-482 1
285-64-362 1 285-64-482 1 1
Made to order
**
Powdered,
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.11
7069-E 7019-E (21-12-2012)
TECHNICAL SPECIFICATIONS AB-285 SPECIFICATION ASTM D2000 : 1BC810 POLYMER : NBR/SBR/CR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.46
D2240
HARDNESS (Shore A)
80
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
100 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7019-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (cr) AB-253 PREMIUM GRADE features resistance to weather and ozone 路 Excellent aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
211-08-482 1
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
164 (74.4)
211-16-362 1
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.9)
209 (94.8)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.12
7069-E 7020-E (21-12-2012)
TECHNICAL SPECIFICATIONS AB-253 SPECIFICATION ASTM D2000 : 2BC508A14C12E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.36
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
800 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 15% max. Elongation: -40% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Tensile: - 70% max. Elongation: -55% max. Volume: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Contains 55% Neoprene polymer base. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7020-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (cr) AB-263 PREMIUM GRADE features resistance to weather and ozone 路 Excellent aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
264-02-362 1 264-02-482 264-04-362 1 264-04-482 264-04-602 1 264-06-362 1 264-06-482 264-08-362 264-08-482 264-08-602 264-12-362 1 264-12-482 264-12-602 264-16-362 264-16-482 264-16-602 264-24-362 264-24-482 264-32-362 1 264-32-482 264-40-482 1 264-48-362 264-48-482 1 264-64-362 1 264-64-482 1 Made to order
GAUGE IN (MM) 1/32 (0.79) 1/32 (0.79) 1/16 (1.59) 1/16 (1.59) 1/16 (1.59) 3/32 (2.38) 3/32 (2.38) 1/8 (3.7) 1/8 (3.7) 1/8 (3.7) 3/16 (4.76) 3/16 (4.76) 3/16 (4.76) 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 3/8 (9.52) 3/8 (9.52) 1/2 (12.70) 1/2 (12.70) 5/8 (15.90) 3/4 (19.00) 3/4 (19.00) 1 (25.40) 1 (25.40)
WIDTH IN (MM) 36 (914.4) 48 (1219.2) 36 (914.4) 48 (1219.2) 60 (1524) 36 (914.4) 48 (1219.2) 36 (914.4) 48 (1219.2) 60 (1524) 36 (914.4) 48 (1219.2) 60 (1524) 36 (914.4) 48 (1219.2) 60 (1524) 36 (914.4) 48 (1219.2) 36 (914.4) 48 (1219.2) 48 (1219.2) 36 (914.4) 48 (1219.2) 36 (914.4) 48 (1219.2)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SURFACE/ROLL SFT (M2) 600 (56.74) 800 (74.32) 300 (27.87) 400 (37.16) 500 (46.45) 225 (20.9) 300 (27.87) 150 (13.93) 200 (18.58) 250 (23.22) 120 (11.15) 160 (14.86) 200 (18.58) 120 (11.15) 160 (14.86) 175 (16.25) 90 (8.36) 120 (11.15) 90 (8.36) 120 (11.15) 120 (11.15) 90 (8.36) 120 (11.15) 90 (8.36) 100 (9.29)
3.13
Black
LENGTH/ROLL LFT (M) 200 (60.96) 200 (60.96) 100 (30.48) 100 (30.48) 100 (30.48) 75 (22.85) 75 (22.85) 50 (15.24) 50 (15.24) 50 (15.24) 40 (12.19) 40 (12.19) 40 (12.19) 40 (12.19) 40 (12.19) 35 (10.66) 30 (9.14) 30 (9.14) 30 (9.14) 30 (9.14) 30 (9.14) 30 (9.14) 30 (9.14) 30 (9.14) 25 (7.62)
WEIGHT/ROLL LBS (KG) 123 (55.8) 164 (74.4) 125 (56.7) 167 (75.8) 209 (94.8) 143 (64.9) 191 (86.6) 125 (56.7) 167 (75.8) 209 (94.8) 148 (67.1) 197 (89.4) 246 (111.6) 201 (91.2) 267 (121.1) 292 (132.5) 226 (102.5) 301 (136.5) 305 (138.3) 407 (184.6) 507 (230) 451 (204.6) 602 (273.1) 608 (275.8) 676 (306.6)
7069-E 7021-E (21-12-2012)
TECHNICAL SPECIFICATIONS AB-263 SPECIFICATION ASTM D2000 : 3BC609A14C12E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.37
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
900 min.
ULTIMATE ELONGATION (%)
300 min.
D1171
OZONE RESISTANCE
70 hrs @ 50 PPHM @ 400C No cracking
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: - 15% max. Elongation: -40% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Tensile: -60% max. Elongation: -50% max. Volume: 100% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/32’’ = 3 pieces, 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Meet FMVSS302 «Specimens did not ignite or were self extinguishing» ASTM C1166, Flame Propagation with average flame propagation of 39 mm and did not drip flames* *Please verify that these meet your customers requirement Material is within RMA commercial gauge tolerances. Contains 55% Neoprene polymer base. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7021-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
neoprene (CR) AB-273 PREMIUM GRADE features resistance to weather and ozone 路 Excellent aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
274-02-482 1
1/32 (0.79)
48 (1219.2)
800 (74.32)
200 (60.96)
177 (80.3)
274-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
133 (60.3)
274-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
177 (80.3)
274-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
134 (60.8)
274-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
179 (81.2)
274-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
215 (97.5)
274-16-482 1
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
286 (129.7)
274-24-482 1
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
303 (137.4)
274-32-482 1
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
429 (194.6)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.14
7069-E 7022-E (21-12-2012)
TECHNICAL SPECIFICATIONS AB-273 SPECIFICATION ASTM D2000 : 3BC710A14C12E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.39
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
200 min.
D1171
OZONE RESISTANCE
70 hrs @ 50 PPHM @ 400C No cracking
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: - 15% max. Elongation: -40% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Tensile: -60% max. Elongation: -50% max. Volume: 100% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 1/32’’ = 3 pieces, 1/16’’ to 1/2’’ = 2 pieces, 5/8’’ to 1’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Meet FMVSS302 «Specimens did not ignite or were self extinguishing» ASTM C1166, Flame Propagation with average flame propagation of 31 mm and did not drip flames* Material is within RMA commercial gauge tolerances. Contains 55% Neoprene polymer base. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7022-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NEOPRENE (cr) AB-289 PREMIUM GRADE features resistance to weather and ozone 路 Excellent aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking 路 ASTM Grade
GRADE
Premium
FINISH
Satin (Both Sides)
POWDER
No
TRIMMED
No
COLOR
283-08-362 1 1
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
127 (57.6)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
3.15
7069-E 7024-E (21-12-2012)
TECHNICAL SPECIFICATIONS AB-289 SPECIFICATION ASTM D2000 : 2BC810C12E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.45
D2240
HARDNESS (Shore A)
80
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
100 min.
D1171
OZONE RESISTANCE
70 hrs @ 50 PPHM @ 400C No cracking
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: - 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Volume: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0.5 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Contains 55% Neoprene polymer base. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7024-E (21-12-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 4 nitrile advantages
· Very good resistance to oil and gasoline · Superior resistance to petroleum-based hydraulic fluids · Wide range of service temperatures · Good resistance to hydrocarbon solvents · Very good resistance to alkalis and acids
limitations
· Inferior resistance to ozone, sunlight and natural aging · Poor resistance to oxygenated solvents
APPLICATIONS*
· Where oil resistance is the main concern · Machinery gaskets, around oil and gas handling equipment · White food grade · Heat and oil resistant belting · Hose cover · Wire and cable
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
4.
7069-E (04-03-2011)
NITRILE AB-344 features Excellent resistance to petroleum 路 based hydraulic fluids range of service temperatures 路 Wide Very good resistance to alkalis and acids 路 ASTM 路 Grade
GRADE
Commercial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
344-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
150 (68)
344-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
150 (68)
344-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
180 (81.6)
344-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
240 (108.9)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.1
7069-E 7058-E (06-06-2014)
TECHNICAL SPECIFICATIONS AB-344 SPECIFICATION ASTM D2000 : 1BE410 POLYMER : NBR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.13
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
500 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 40% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 80% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F (-290 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7058-E (06-06-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NITRILE AB-364 features Excellent resistance to petroleum-based 路 hydraulic fluids range of service temperatures 路 Wide Very good resistance to alkalis and acids 路 ASTM 路 grade
GRADE
Commercial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
305-02-362 1
1/32 (0.79)
36 (914.4)
600 (56.74)
200 (60.96)
122 (55.3)
305-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
124 (56.2)
305-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
166 (75.3)
305-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
142 (64.4)
305-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
124 (56.4)
305-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
166 (75.3)
305-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
147 (66.7)
305-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
196 (88.9)
305-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
199 (90.3)
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
265 (120.2)
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
224 (101.6)
305-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
298 (135.2)
305-32-362 1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
303 (137.4)
305-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
404 (183.3)
305-40-362 1
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
377 (171)
305-16-482 305-24-362
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.2
7069-E 7025-E (05-02-2013)
TECHNICAL SPECIFICATIONS AB-364 SPECIFICATION ASTM D2000 : 1BE610 POLYMER : Nitrile (NBR) (Buna N)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.34
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
350 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 40% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 80% max.
TEMPERATURE RANGE (general guideline)
-300 to 1900 F (-340 to 880 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7025-E (05-02-2013
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NITRILE AB-355 features Superior resistance to petroleum-based · hydraulic fluids · Excellent resistance to diesel and biodiesel range of service temperatures · Wide Very good resistance to alkalis and acids · ASTM and MIL 6855 Class 1 · Grade Grade 50
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
302-02-362 1
1/32 (0.79)
36 (914.4)
600 (56.74)
200 (60.96)
114 (51.7)
302-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
113 (51.3)
302-04-482
1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
150 (68)
302-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
163 (73.9)
302-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
108 (49)
302-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
145 (65.8)
302-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
130 (59)
302-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
174 (78.9)
302-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.2)
173 (78.5)
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
231 (104.8)
302-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
197 (89.4)
302-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
262 (118.8)
302-32-362 1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
260 (117.9)
302-32-482 1
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
347 (157.4)
1
302-16-482
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.3
7069-E 7026-E (08-12-2015)
TECHNICAL SPECIFICATIONS AB-355 SPECIFICATION ASTM D2000 : 2BG520B14EF11E014E034 POLYMER : Nitrile (NBR) (Buna N)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.11
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
2000 min.
ULTIMATE ELONGATION (%)
350 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 25% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max. Volume: 0 to 25% max.
FLUID RESISTANCE (FUEL A)
70 hrs @ 230C Changed Hardness: +/-10 points max. Tensile: -25% max. Elongation: -25% max. Volume: -5 to +10% max.
FLUID RESISTANCE (FUEL B)
70 hrs @ 230C
TEMPERATURE RANGE (general guideline)
Volume Changed 30% max.
-400 to 2000 F (-400 to 930C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7026-E (08-12-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NITRILE AB-365 features Superior resistance to petroleum-based · hydraulic fluids · Excellent resistance to diesel and biodiesel range of service temperatures · Wide Very good resistance to alkalis and acids · ASTM and MIL 6855 Class 1 · Grade Grade 60
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
303-02-362 1
1/32 (0.79)
36 (914.4)
600 (56.74)
200 (60.96)
119 (54)
303-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
111 (50.3)
303-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
148 (67.1)
303-06-482 1
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
168 (76.2)
303-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
112 (50.8)
303-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
149 (67.6)
303-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
134 (60.8)
303-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
179 (81.2)
303-16-362 1
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
179 (81.2)
303-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
238 (108)
303-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
201 (91.2)
303-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
268 (121.6)
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
268 (121.6)
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
357 (161.9)
303-40-362 1
5/8 (15.90)
36 (914.4)
90 (8.36)
30 (9.14)
335 (152)
303-40-482
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
446 (202.3)
303-32-362
1
303-32-482
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.4
7069-E 7027-E (29-08-2012)
TECHNICAL SPECIFICATIONS AB-365 SPECIFICATION ASTM D2000 : 2BG625B14EA14EF11EF21E014E034 MIL-R-6855, CLASS 1, GRADE 60 // POLYMER : Nitrile (NBR) (Buna N) ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.15
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
350 min.
D395B
COMPRESSION SET
22 hrs @ 1000C (25% max.)
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max. Volume: 0 to 25% max.
FLUID RESISTANCE (FUEL A)
70 hrs @ 230C Changed Hardness: +/-10 points max. Tensile: -25% max. Elongation: -25% max. Volume: -5 to +10% max.
FLUID RESISTANCE (Water)
70 hrs @ 1000C Changed Hardness: +/-10 points max. Volume: +/- 15% max.
FLUID RESISTANCE (Diesel)
70 hrs @ 230C / Volume changed 3% nom.
TEMPERATURE RANGE (general guideline)
-400 to 2000 F (-400 to 930C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Meets MIL 6855 Class 1, Grade 60 Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7027-E (29-08-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NITRILE AB-375 features Superior resistance to petroleum-based · hydraulic fluids · Excellent resistance to diesel and biodiesel range of service temperatures · Wide Very good resistance to alkalis and acids · ASTM · Grade
GRADE
Premium
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
304-02-362 1
1/32 (0.79)
36 (914.4)
600 (56.74)
200 (60.96)
118 (53.5)
304-04-362 1
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
114 (51.7)
304-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
157 (71.2)
304-06-482
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.96)
171 (77.6)
304-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
115 (52.2)
304-08-482 1
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
153 (69.4)
304-12-362
1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
138 (62.6)
304-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
185 (83.9)
304-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
174 (78.8)
304-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
246 (111.6)
304-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
207 (93.9)
304-24-482 1
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
276 (125.2)
304-32-362
1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
276 (125.2)
304-32-482 1
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
368 (166.9)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.5
7069-E 7028-E (17-05-2012)
TECHNICAL SPECIFICATIONS AB-375 SPECIFICATION ASTM D2000 : 2BG725B14EA14EF11EF21E014E034 POLYMER : Nitrile (NBR) (Buna N) ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.18
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C (25% max.)
D573
HEAT AGING
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max. 70 hrs @ 1000C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max. Volume: 0 to 25% max. 70 hrs @ 230C Changed Hardness: +/-10 points max. Tensile: -25% max. Elongation: -25% max. Volume: -5 to +10% max. 70 hrs @ 1000C Changed Hardness: +/-10 points max. Volume: +/- 15% max. -400 to 2000 F (-400 to 930C)
FLUID RESISTANCE (FUEL A)
FLUID RESISTANCE (Water)
TEMPERATURE RANGE (general guideline) Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances.
Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7028-E (17-05-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
NITRILE AB-366 18-03
features Grade and Dairy 3A Specs · FDA · Excellent resistance to petroleum-based hydraulic fluids range of service temperatures · Wide Very good resistance to alkalis and acids · ASTM · Grade
GRADE
Industrial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
White
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
307-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
129 (58.5)
307-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
171 (77.6)
307-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
147 (66.7)
307-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
129 (58.5)
307-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
171 (77.6)
307-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
152 (68.9)
307-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
202 (91.6)
307-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
206 (93.4)
307-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
274 (124.3)
307-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
309 (140.2)
307-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
417 (189.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
4.6
7069-E 7030-E (22-01-2013)
TECHNICAL SPECIFICATIONS AB-366 18-03 SPECIFICATION ASTM D2000 : 1BF610 meets FDA requirements POLYMER : NBR/SBR (White)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.4
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 50% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed Volume: 60% max.
TEMPERATURE RANGE (general guideline)
-400 to 2000 F -400 to 930C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7030-E (22-01-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 5 butyl advantages
· Outstanding impermeability to gases and vapour · Very good resistance to heat, oxygen, ozone and sunlight · High energy absorption (damping) · Excellent resistance to alkalis and oxygenated solvents · Good hot tear strength · Superior resistance to water and steam
limitations
· High compression set · Poor resistance to oil, gasoline · Fair processability · Poor resilience
APPLICATIONS*
· Gaskets and seals · Tire inner tubes · Sport ball bladder · Hose
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
5.
7069-E (04-03-2011)
butyl AB-465 features
路 路 路 路
Outstanding impermeability to gases and vapor Very good resistance to heat, oxygen, ozone and sunlight Excellent resistance to water and steam ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
360-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
158 (71.7)
360-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
119 (54)
360-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
159 (72.1)
360-12-362 1
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
144 (65.3)
360-16-362 1
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
191 (86.6)
360-16-482 1
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
255 (115.7)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
5.1
7069-E 7031-E (04-03-2011)
TECHNICAL SPECIFICATIONS AB-465 SPECIFICATION ASTM D2000 : 3BA610A14C12 POLYMER : Butyl (IIR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.24
D2240
HARDNESS (Shore A)
60
D4122
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D1171
OZONE RESISTANCE
70 hrs 50 PPHM @ 400C No Cracking
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
TEMPERATURE RANGE (general guideline)
-300 to 2120 F -340 to 1000C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7031-E (04-03-2011)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 6 epdm advantages
· Excellent resistance to heat, ozone and sunlight · Very good flexibility at low temperatures · Good resistance to alkalis, acids and oxygenated solvents · Superior resistance to water and steam · Excellent color stability
limitations
· Poor resistance to oil, gasoline and hydrocarbon solvents · Poor adhesion to fabrics and metals
APPLICATIONS*
· Weatherstripping for doors and windows · Automotive weatherstripping · Gaskets and washers around electrical equipment · Conveyor belting · Hose for steam, garden, radiator · Caulking material
*These applications only serve as general guidelines. Please refer to specific technical data sheet to select the proper rubber for your application.
6.
7069-E (04-03-2011)
epdm AB-553 features Excellent resistance to heat, ozone 路 and sunlight resistance to cold and hot water 路 Superior Very good flexibility at low temperatures 路 ASTM 路 Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
354-04-482 1
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
150 (68)
354-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
110 (49.9)
354-08-482 1
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
146 (66.2)
354-12-482 1
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
176 (79.8)
354-16-362 1
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
176 (79.8)
354-16-482 1
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
234 (106.1)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
6.1
7069-E 7032-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-553 SPECIFICATION ASTM D2000 : 3BA508A14C12F17 POLYMER : Ethylene-Propylene (EPDM)
ASTM D2240
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1,16
HARDNESS (Shore A)
50
D4121212 TENSILE (psi)
800 min.
ULTIMATE ELONGATION (%)
300 min.
D2137
COLD TEMPERATURE
-400C
D1171
OZONE RESISTANCE
70 hrs 50 PPHM @ 400C No Cracking
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
TEMPERATURE RANGE (general guideline)
-400 to 2500 F -400 to 1210C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7032-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
epdm AB-563 features Excellent resistance to heat, ozone 路 and sunlight resistance to cold and hot water 路 Superior Very good flexibility at low temperatures 路 ASTM 路 Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
364-04-362
1/16 (1.59)
36 (914.4)
300 (27.87)
100 (30.48)
111 (50.3)
364-04-482
1/16 (1.59)
48 (1219.2)
400 (37.16)
100 (30.48)
148 (67.1)
364-06-362 1
3/32 (2.38)
36 (914.4)
225 (20.9)
75 (22.85)
127(57.6)
364-06-482
3/32 (2.38)
48 (1219.2)
300 (27.87)
75 (22.85)
169 (76.7)
364-06-552 1
3/32 (2.38)
55 (1397)
299 (27.78)
65 (19.812)
168 (76.2)
364-08-362
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
111 (50.3)
364-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
148 (67.1)
364-08-602 1
1/8 (3.7)
60 (1524)
250 (23.22)
50 (15.24)
185 (83.9)
364-12-362
3/16 (4.76)
36 (914.4)
120 (11.15)
40 (12.19)
131 (59.4)
364-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.19)
174 (78.9)
364-16-362
1/4 (6.35)
36 (914.4)
120 (11.15)
40 (12.19)
177 (80.3)
364-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
236 (107)
364-24-362 1
3/8 (9.52)
36 (914.4)
90 (8.36)
30 (9.14)
199 (90.3)
364-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
266 (120.7)
364-32-362 1
1/2 (12.70)
36 (914.4)
90 (8.36)
30 (9.14)
270 (122.5)
364-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
360 (163.3)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
6.2
7069-E 7033-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-563 SPECIFICATION ASTM D2000 : 3BA608A14C12F17 POLYMER : Ethylene-Propylene (EPDM)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.2
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
800 min.
ULTIMATE ELONGATION (%)
300 min.
D2137
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
70 hrs 50 PPHM @ 400C No Cracking
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
TEMPERATURE RANGE (general guideline)
-400 to 2500 F -400 to 1210C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7033-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
epdm AB-566 features FDA Grade, meets FDA 21 CFR · (4-1-93 ed), 177.26000 · Excellent resistance to heat, ozone and weather Good resistance to ordinary diluted · acids, and alkalines Superior resistance to hot and cold water · ASTM · Grade
GRADE
Industrial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
White
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
566-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
175 (79.4)
566-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.19)
280 (127)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
6.3
7069-E 7093-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-566 SPECIFICATION ASTM D2000 : 1BA610, POLYMER : Ethylene-Propylene (EPDM)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.33
D2240
HARDNESS (Shore A)
60 +/- 5
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
22 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: - 30% max. Elongation: +/- 50% max.
TEMPERATURE RANGE (general guideline)
-400 to 2500 F -400 to 1210C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. Meets the requirements for FDA 21 CFR (4-1-93 ed) 177..26000 Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7093-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 7 fabric reinforceD rubber 路
Where applications call for maximum conformity and deformation resistance, American Biltrite offers reinforced sheet rubber in several popular combinations of fabric and compounds. Custom compounding and fabrication of reinforced sheet products can be specified to match unique application requirements. In this section, you will find C.I. Packing products as well as Diaphragm sheet rubber. Fabric reinforced rubber presents good dimensional stability under high compression loads. To compare the advantages and limitations of each polymer, see respective polymer sections.
7.
7069-E (04-03-2011)
FABRIC REINFORCED RUBBER AB-951 neoprene C.I. PACKING features neoprene blend fabric reinforced 路 Asheet for use in applications where
stresses are generally static in nature One to four plies of spun polyester fabric ASTM Grade
路 路
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
121-08-362
1/8 (3.7) 1 PLY
36 (914.4)
150 (13.93)
50 (15.24)
139 (63.1)
121-08-482
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
185 (83.9)
1/8 (3.7) 1 PLY
72 (1828.8)
300 (27.87)
50 (15.24)
277 (125.6)
3/16 (4.76) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
165 (74.8)
121-16-482 1
1/4 (6.35) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
299 (135.6)
123-02-482
1/32 (0.79) 1 PLY
48 (1219.2)
800 (74.32)
200 (60.96)
151 (68.5)
1/16 (1.59) 1 PLY
36 (914.4)
300 (27.87)
100 (30.48)
142 (64.4)
123-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
190 (86.2)
123-08-362 1
1/8 (3.7) 2 PLY
36 (914.4)
150 (13.93)
50 (15.24)
136 (61.7)
123-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
181 (82.1)
123-12-362 1
3/16 (4.76) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
164 (74.4)
123-12-482
3/16 (4.76) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
218 (98.9)
123-16-482
1/4 (6.35) 4 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
274 (124.3)
121-08-722 121-12-362
123-04-362
1
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.1
7069-E 7039-E (04-03-2011)
TECHNICAL SPECIFICATIONS AB-951 SPECIFICATION ASTM D2000 : 1BC706Z1 POLYMER : NBR/SBR/CR
ASTM
Z1 = HARDNESS 65 ± 5 (Shore A)
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.45
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F -290 to 880C
Mullen Burst 1Ply: 300 psi nom. Maximum pieces per roll : 2 (Exception 1/32’’ = 3 pieces) Minimum piece length : 5’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 2 oz. Polyester Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7039-E (04-03-2011)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER IM-950 neoprene C.I. PACKING features neoprene blend fabric reinforced 路 Asheet for use in applications where the stresses are generally static in nature One to four plies of nylon fabric
路
GRADE
Commercial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
Black
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
103-04-362 1
1/16 (1.59) 1 PLY
36 (914.4)
300 (27.87)
100 (30.48)
136 (61.7)
103-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
190 (86.3)
103-08-362 1
1/8 (3.7) 2 PLY
36 (914.4)
150 (13, 93)
50 (15.24)
136 (61.7)
103-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
190 (86.2)
1
3/16 (4.76) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
164 (74.4)
103-12-482 1
3/16 (4.76) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
218 (98.9)
103-16-362 1
1/4 (6.35) 4 PLY
36 (914.4)
120 (11.15)
40 (12.19)
218 (98.9)
1
1/4 (6.35) 4 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
291 (132)
1/8 (3.7) 1 PLY
36 (914.4)
150 (13, 93)
50 (15.24)
143 (64.7)
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
190 (86.3)
3/16 (4.76) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
164 (74.4)
104-12-482
3/16 (4.76) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
228 (103.6)
104-16-362 1
1/4 (6.35) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
218 (98.9)
104-16-482
1/4 (6.35) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
304 (138)
103-12-362
103-16-482 104-08-362 104-08-482 104-12-362
1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.2
7069-E 7087-E (15-05-2014)
TECHNICAL SPECIFICATIONS IM-950 SPECIFICATION ASTM D2240 POLYMER : NEOPRENE BLEND
HARDNESS 65 ±7 (Shore A)
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
600 Nominal
TEMPERATURE RANGE (general guideline)
-200 to 1900 F -290 to 880C
Mullen Burst 1Ply: 300 psi nom. Maximum pieces per roll : 1 Width tolerance : +/- 1" Length tolerance : +/- 10% Durometer Tolerance: +/- 7 points Fabric Nylon Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. Physical properties based on rubber only.
7069-E 7087-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-984 sbr C.I. PACKING features SBR blend, fabric reinforced sheet 路 An for use in applications where the stresses are generally static in nature One to two plies of spun polyester fabric ASTM Grade
路 路
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
117-04-362
1/16 (1.59) 1 PLY
36 (914.4)
300 (27.87)
100 (30.48)
142 (64.4)
117-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
189 (85.7)
117-06-362
3/32 (2.38) 1 PLY
36 (914.4)
225 (20.9)
75 (22.85)
159 (72.1)
117-06-482 1
3/32 (2.38) 1 PLY
48 (1219.2)
300 (27.87)
75 (22.85)
211 (95.7)
117-08-362
1/8 (3.7) 1 PLY
36 (914.4)
150 (13.93)
50 (15.24)
143 (64.9)
117-08-482
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
190 (86.2)
117-12-362
3/16 (4.76) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
170 (77.1)
117-12-482
3/16 (4.76) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
227 (103)
117-16-362
1/4 (6.35) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
229 (103.9)
117-16-482
1/4 (6.35) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
305 (138.3)
118-08-362
1/8 (3.7) 2 PLY
36 (914.4)
150 (13.93)
50 (15.24)
143 (64.9)
118-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
191 (86.6)
118-08-722 1
1/8 (3.7) 2 PLY
72 (1828.8)
300 (27.87)
50 (15.24)
286 (129.7)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.3
7069-E 7040-E (04-03-2011)
TECHNICAL SPECIFICATIONS AB-984 SPECIFICATION ASTM D2000 : 1AA805 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.51
D2240
HARDNESS (Shore A)
80
D412
TENSILE (psi)
500 min.
ULTIMATE ELONGATION (%)
100 min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Mullen Burst 1Ply: 300 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 2 oz. Polyester Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7040-E (04-03-2011)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-2102 sbr C.I. PACKING features SBR fabric reinforced sheet for use in 路 An fabric applications where the stresses are generally static in nature One to four plies of spun polyester fabric ASTM Grade
路 路
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
112-04-362
1/16 (1.59) 1 PLY
36 (914.4)
300 (27.87)
100 (30.48)
124 (56.2)
112-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
166 (75.3)
112-08-362
1/8 (3.7) 1 PLY
36 (914.4)
150 (13.93)
50 (15.24)
129 (58.5)
112-08-482
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
172 (78)
112-08-722
1/8 (3.7) 1 PLY
72 (1828.8)
300 (27.87)
50 (15.24)
257 (116.6)
112-12-362
3/16 (4.76) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
149 (67.6)
112-12-482
3/16 (4.76) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
198 (89.8)
112-16-362
1/4 (6.35) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
199 (90.3)
112-16-482
1/4 (6.35) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
266 (120.7)
112-16-722 1
1/4 (6.35) 3 PLY
72 (1828.8)
240 (22.29)
40 (12.19)
394 (178.7)
116-08-362
1/8 (3.7) 2 PLY
36 (914.4)
150 (13.93)
50 (15.24)
123 (55.8)
116-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
163 (73.9)
116-12-362 1
3/16 (4.76) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
148 (67.1)
116-12-482
3/16 (4.76) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
197 (89.4)
116-16-362 1
1/4 (6.35) 4 PLY
36 (914.4)
120 (11.15)
40 (12.19)
197 (89.4)
116-16-482
1/4 (6.35) 4 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
263 (119.3)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.4
7069-E 7041-E (10-03-2011)
TECHNICAL SPECIFICATIONS AB-2102 SPECIFICATION ASTM D2000 : 2AA607A13 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.33
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
700 min.
ULTIMATE ELONGATION (%)
250 min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Mullen Burst 1Ply: 300 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 2 oz. Polyester Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7041-E (10-03-2011)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER IM-2100 sbr C.I. PACKING features SBR fabric reinforced sheet for use 路 An in applications where the stresses are generally static in nature One to four plies of nylon fabric
路
GRADE
Commercial
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL LENGTH/ROLL SFT (M2) LFT (M)
WEIGHT/ROLL LBS (KG)
101-04-362
1/16 (1.59) 1 PLY
36 (914.4)
300 (27.87)
100 (30.48)
148 (67)
101-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
197 (89.3)
101-08-362
1/8 (3.7) 2 PLY
36 (914.4)
150 (13.93)
50 (15.24)
147 (66.9)
101-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
197 (89.2)
101-12-362
3/16 (4.76) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
177 (80.2)
101-12-482
3/16 (4.76) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
236 (107)
101-16-362
1/4 (6.35) 4 PLY
36 (914.4)
120 (11.15)
40 (12.19)
236 (107)
101-16-482
1/4 (6.35) 4 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
315 (142.7)
102-08-362
1/8 (3.7) 1 PLY
36 (914.4)
150 (13.93)
50 (15.24)
148 (66.9)
102-08-482
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
197 (89.2)
102-12-362
3/16 (4.76) 2 PLY
36 (914.4)
120 (11.15)
40 (12.19)
177 (80)
102-12-482
3/16 (4.76) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
236 (107)
102-16-362
1/4 (6.35) 3 PLY
36 (914.4)
120 (11.15)
40 (12.19)
236 (107)
102-16-482
1/4 (6.35) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
315 (142.8)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.5
7069-E 7041-E (15-05-2014)
TECHNICAL SPECIFICATIONS IM-2100 SPECIFICATION ASTM D2240 HARDNESS 65 ±7 (Shore A) POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
500 nominal
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Mullen Burst 1Ply: 300 psi nom. Maximum pieces per roll : 1 Width tolerance : +/- 1 Length tolerance : +/- 10% Fabric Nylon Durometer Tolerance: +/- 7 points Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. Physical properties based on rubber only.
7069-E 7041-E (15-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3205 DIAPHRAGM features membrane with low permeability · Atoflexible fluids or gases Capable of permitting relative motion · between a stationary and a moving
member while maintaining a separation of the two media on either side and may maintain a pressure differencial between the two media Often mechanically fastened for weather stripping One to four plies of 9.7 oz polyester fabric Premium grade neoprene ASTM Grade
· · · ·
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
255-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
196 (88.9)
255-06-482
3/32 (2.38) 1 PLY
48 (1219.2)
300 (27.87)
75 (22.9)
227 (103)
255-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
183 (83)
255-12-482
3/16 (4.76) 3 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
214 (97.1)
255-16-482
1/4 (6.35) 4 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
283 (128.4)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.6
7069-E 7042-E (18-10-2012)
TECHNICAL SPECIFICATIONS AB-3205 SPECIFICATION ASTM D2000 : 2BC714A14B14E014E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.58
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
1400 min.
ULTIMATE ELONGATION (%)
250 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 35% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 15 points max. Tensile: - 15% max. Elongation: -40% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed: Hardness: +/- 10 points max. Tensile: - 70% max. Elongation: -55% max. Volume: + 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 2120 F -290 to 1000C
Mullen Burst 1 Ply : 700 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 9.7 oz. Polyester Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7042-E (18-10-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3210 neoprene DIAPHRAGM features or two plies of 14.0 oz nylon 路 One Premium grade neoprene compound 路 ASTM 路 Grade.
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
234-04-542
1/16 (1.59) 1 PLY
54 (1371.6)
450 (41.8)
100 (30.48)
217 (98.4)
234-08-542
1/8 (3.7) 1 PLY
54 (1371.6)
225 (20.9)
50 (15.24)
205 (93)
236-08-542
1/8 (3.7) 2 PLY
54 (1371.6)
225 (20.9)
50 (15.24)
208 (94.3)
236-12-542
3/16 (4.76) 2 PLY
54 (1371.6)
113 (10.49)
25 (7.62)
154 (69.9)
236-16-542
1/4 (6.35) 2 PLY
54 (1371.6)
113 (10.49)
25 (7.62)
214 (97.1)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.7
7069-E 7043-E (22-01-2013)
TECHNICAL SPECIFICATIONS AB-3210 SPECIFICATION ASTM D2000 : 2BC714A14B14E014E034 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.41
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
1400 min.
ULTIMATE ELONGATION (%)
250 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 35% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 15 points max. Tensile: - 15% max. Elongation: -40% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Changed: Hardness: +/- 10 points max. Tensile: - 70% max. Elongation: -55% max. Volume: + 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 2120 F -290 to 1000C
Mullen Burst 1 Ply : 800 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 14 oz. Nylon Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7043-E (22-01-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3220 neoprene DIAPHRAGM features or two plies of 14.0 oz nylon 路 One 路 Economy grade neoprene compound
GRADE
Commercial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
239-04-542
1/16 (1.59) 1 PLY
54 (1371.6)
450 (41.8)
100 (30.48)
200 (90.7)
239-06-542 1
3/32 (2.38) 1 PLY
54 (1371.6)
338 (31.4)
75 (22.85)
252 (114.3)
239-08-542 1
1/8 (3.7) 1 PLY
54 (1371.6)
225 (20.9)
50 (15.24)
205 (93)
246-08-542
1/8 (3.7) 2 PLY
54 (1371.6)
225 (20.9)
50 (15.24)
206 (93.4)
246-12-542 1
3/16 (4.76) 2 PLY
54 (1371.6)
113 (10.49)
25 (7.62)
155 (70.3)
246-16-542
1/4 (6.35) 2 PLY
54 (1371.6)
113 (10.49)
25 (7.62)
216 (98)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.8
7069-E 7044-E (22-01-2013)
TECHNICAL SPECIFICATIONS AB-3220 SPECIFICATION ASTM D2000 : 1BC706Z1 POLYMER : SBR/NBR/CR
ASTM
Z1 = HARDNESS 65 ± 5 (Shore A)
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.46
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F -290 to 880C
Mullen Burst 1Ply: 800 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 14 oz. Nylon Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7044-E (22-01-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3228 neoprene DIAPHRAGM features or two plies of 4.3 oz. nylon 路 One 路 Neoprene blend compound
GRADE
Commercial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
241-04-482
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.6)
100 (30.48)
198 (89.8)
241-06-482 1
3/32 (2.38) 1 PLY
48 (1219.2)
300 (27.87)
75 (22.85)
217 (98.4)
241-08-482 1
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
203 (92.1)
242-08-482
1/8 (3.7) 2 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
203 (92.1)
242-12-482 1
3/16 (4.76) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
220 (99.8)
242-16-482
1/4 (6.35) 2 PLY
48 (1219.2)
160 (14.86)
40 (12.19)
298 (135.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.9
7069-E 7045-E (29-05-2014)
TECHNICAL SPECIFICATIONS AB-3228 SPECIFICATION ASTM D2000 : 1BC706Z1 POLYMER : CR/NBR/SBR
ASTM
Z1 = HARDNESS 65 ± 5 (Shore A)
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.46
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
600 min.
ULTIMATE ELONGATION (%)
300 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F -290 to 880C
Mullen Burst 1Ply: 600 psi nom. Maximum pieces per roll : 2 Minimum piece length : 10 Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 4.3 oz. Nylon Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7045-E (29-05-2014)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3275 neoprene DIAPHRAGM features to four plies of 9 oz. polyester fabric 路 One 路 Neoprene blend compound
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
327-04-602
1/16 (1.59) 1 PLY
60 (1524)
250 (23.22)
50 (15.24)
104 (47.2)
327-08-602 1
1/8 (3.7) 1 PLY
60 (1524)
125 (11.61)
25 (7.62)
109 (49.4)
327-12-602 1
3/16 (4.76) 2 PLY
60 (1524)
100 (9.29)
20 (6.09)
126 (57.2)
327-16-602 1
1/4 (6.35) 2 PLY
60 (1524)
75 (6,96)
15 (4.57)
129 (58.5)
328-08-602
1/8 (3.7) 2 PLY
60 (1524)
125 (11.61)
25 (7.62)
113 (51.3)
328-12-602 1
3/16 (4.76) 3 PLY
60 (1524)
100 (9.29)
20 (6.09)
135 (61.2)
328-16-602
1/4 (6.35) 4 PLY
60 (1524)
75 (6.96)
15 (4.57)
130 (59)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.10
7069-E 7046-E (04-03-2011)
TECHNICAL SPECIFICATIONS AB-3275 SPECIFICATION ASTM D2000 : 1BC712 POLYMER : NBR/SBR/CR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.42
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
1200 min.
ULTIMATE ELONGATION (%)
250 min.
D395B
COMPRESSION SET
22 hrs @ 1000C 80% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D471
OIL AGING (#3)
70 hrs @ 1000C Volume changed: 120% max.
TEMPERATURE RANGE (general guideline)
-200 to 1900 F -290 to 880C
Mullen Burst 1 Ply : 600 psi nom. Maximum pieces per roll : 2 Minimum piece length : 5’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 9 oz. Polyester Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7046-E (04-03-2011)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
FABRIC REINFORCED RUBBER AB-3560 epdm DIAPHRAGM features ply of 4.3 oz. nylon 路 One 路 EPDM compound
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
366-04-482 1
1/16 (1.59) 1 PLY
48 (1219.2)
400 (37.16)
100 (30.48)
162 (73.5)
366-08-482
1/8 (3.7) 1 PLY
48 (1219.2)
200 (18.58)
50 (15.24)
163 (73.9)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7.11
7069-E 7047-E (22-01-2013)
TECHNICAL SPECIFICATIONS AB-3560 SPECIFICATION ASTM D2000 : 3BA608A14C12F17 POLYMER : Ethylene-Propylene (EPDM)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.2
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
800 min.
ULTIMATE ELONGATION (%)
250 min.
D2137
COLD TEMPERATURE
-400C
D1171
OZONE RESISTANCE
70 hrs @ 100 PPHM @ 400C No cracking
D395B
COMPRESSION SET
22 hrs @ 700C 50%
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
TEMPERATURE RANGE (general guideline)
-400 to 2500 F -400 to 1210C
Mullen Burst 1 Ply : 600 psi nom. Maximum pieces per roll : 2 Minimum piece length : 5’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Fabric 4.3 oz. Nylon Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7047-E (22-01-2013)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Section 8 specialty products ·
Manufacturing specialty products such as footwear components, truck flaps and flooring products, American Biltrite also has the expertise, the resources and the equipment to manufacture custom rubber products designed and formulated to your exact specifications and applications. Please provide a few parameters to describe your needs, and we will explore the options with you. In this section, you will find products such as DuraShield®, Transeal® as well as products that meet the specific requirements of the U.S. Military.
8.
7069-E (04-03-2011)
SPECIALTY PRODUCTS AB-140 DURASHIELD features offers the ideal blend of high tear and 路 abrasion resistance combined with
excellent durability and noise reduction Ideal for use in mining and aggregates ASTM Grade
路 路
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
132-04-482
1/16 (1.59)
48 (1219.2)
500 (46)
125 (38.1)
163 (73.9)
132-08-362 1
1/8 (3.7)
36 (914.4)
105 (9.76)
35 (10.7)
68 (30.8)
132-08-482
1/8 (3.7)
48 (1219.2)
140 (13.01)
35 (10.7)
91 (41.3)
132-12-3621
3/16 (4.76)
36 (914.4)
105 (9.76)
35 (10.7)
101 (45.8)
132-12-482
3/16 (4.76)
48 (1219.2)
140 (13.01)
35 (10.7)
134 (60.8)
132-16-362
1/4 (6.35)
36 (914.4)
105 (9.76)
35 (10.7)
137 (62.1)
132-16-482
1/4 (6.35)
48 (1219.2)
140 (13.01)
35 (10.7)
182 (82.6)
132-24-482
3/8 (9.52)
48 (1219.2)
140 (13.01)
35 (10.7)
273 (123.8)
132-32-362
1/2 (12.70)
36 (914.4)
105 (9.76)
35 (10.7)
277 (125.6)
132-32-482
1/2 (12.70)
48 (1219.2)
140 (13.01)
35 (10.7)
370 (167.8)
132-32-552
1/2 (12.70)
55 (1397)
160 (14)
35 (10.7)
423 (191.9)
132-32-582 1
1/2 (12.70)
58 (1473)
145 (13.47)
30 (9.1)
404 (183.3)
132-48-362 1
3/4 (19.00)
36 (914.4)
75 (6.96)
25 (7.62)
293 (132.9)
132-48-482
3/4 (19.00)
48 (1219.2)
100 (9.29)
25 (7.62)
390 (176.9)
132-64-362
1 (25.40)
36 (914.4)
75 (6.96)
25 (7.62)
395 (179.2)
132-64-482 1
1 (25.40)
48 (1219.2)
100 (9.29)
25 (7.62)
527 (239.0)
1
Made to order
This product is also available in slit widths - see Skirt-Shield on p.8.12
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.1
7069-E 7048-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-140 SPECIFICATION ASTM D2000 : 4aa430a13b13f17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.06
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
350 nom.
DIN ABRASION
Wet: 40mm3 Dry: 160mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 (exception 1/16’’ = 2 pieces) Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ = +/- 10% // 35’ Rolls +1 / -2’ (1/8’’-1/2’’), 36’’ & 48’’ Wide // 25’ Rolls (3/4’’-1’’), min. 10’ Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7048-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-142 DURASHIELD features Same compound as AB-140 with an 路 added special bonding layer Grade 路 ASTM 路 Ideal for use in mining and aggregates
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
134-08-482
1/8 (3.7)
48 (1219.2)
140 (13)
35 (10.66)
98 (44.5)
134-12-482
3/16 (4.76)
48 (1219.2)
140 (13)
35 (10.66)
148 (67.1)
134-16-482
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
193 (87.5)
134-24-482
3/8 (9.52)
48 (1219.2)
140 (13)
35 (10.66)
292 (132.5)
134-32-482
1/2 (12.70)
48 (1219.2)
140 (13)
35 (10.66)
400 (181.4)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.2
7069-E 7049-E (03-06-2015)
TECHNICAL SPECIFICATIONS AB-142 SPECIFICATION ASTM D2000 : 4aa430a13b13f17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.06
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
350 nom.
DIN ABRASION
Wet: 40mm3 Dry: 160mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : 35’ Rolls (1/8’’ to 1/2’’), min. 10’ Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7049-E (03-06-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-144 DURASHIELD features
路 路 路
A 60 durometer firmer version of AB-140 compounded for longer wear ASTM Grade Ideal for use in mining and aggregates
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
144-08-362
1/8 (3.7)
36 (914.4)
150 (13.9)
50 (15.24)
113 (51.3)
144-08-482
1/8 (3.7)
48 (1219.2)
140 (13)
35 (10.7)
106 (48.1)
144-12-4861
3/16 (4.76)
48 (1219.2)
140 (13)
35 (10.7)
156 (70.8)
144-24-4821
3/8 (9.52)
48 (1219.2)
140 (13)
35 (10.7)
265 (120.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.3
7069-E 7088-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-144 SPECIFICATION ASTM D2000 : 4AA630A13F17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.11
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
450 min.
TEAR (Lbs/in.)
450 nom.
DIN ABRASION
Wet: 40mm3 Dry: 225mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : min. 10’ Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7088-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-146 DURASHIELD features Same compound as AB-144 with a 路 special bonding layer added Grade 路 ASTM 路 Ideal for use in mining and aggregates
146-16-4821 1
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
208 (94.3)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.4
7069-E 7051-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-146 SPECIFICATION ASTM D2000 : 4AA630A13F17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.11
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
400 min.
TEAR (Lbs/in.)
450 nom.
DIN ABRASION
Wet: 40mm3 Dry: 225mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : min. 10’ Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7051-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-147 DURASHIELD features The ideal choice for color sensitive 路 applications. Compounded in white
rubber, AB-147 is otherwise identical to AB-142 ASTM Grade Ideal for use in mining and aggregates
路 路
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
White
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
147-08-482 1
1/8 (3.7)
48 (1219.2)
140 (13)
35 (10.66)
102 (46.3)
147-16-482 1
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
200 (90.7)
147-32-482 1
1/2 (12.70)
48 (1219.2)
140 (13)
35 (10.66)
400 (181.4)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.5
7069-E 7052-E (17-05-2012)
TECHNICAL SPECIFICATIONS AB-147 SPECIFICATION ASTM D2000 : 4AA430F17 POLYMER : Natural Rubber (NR) (White)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.11
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
450 nom.
DIN ABRASION
Wet: 40mm3 Dry: 160mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : min. 10’ Specifications are for FACE ply only Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7052-E (17-05-2012)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
Natural (NR) AB-148 durashield features to meet the requirements of · designed the squeegee floor care market tensile, cut & tear resistant · High abrasion resistance in both · Excellent wet and dry conditions · ASTM Grade
GRADE
Specialty
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
149-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
129 (58.5)
149-12-482
3/16 (4.76)
48 (1219.2)
160 (14.86)
40 (12.2)
157 (71.2)
149-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
205 (93)
149-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.14)
235 (106.6)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.6
7069-E 7094-E (22-07-2015)
TECHNICAL SPECIFICATIONS AB-148 SPECIFICATION ASTM D2000 : 2AA325A13F17Z1 POLYMER : Natural Rubber (NR)
ASTM
Z1 = 37 Durometer
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.05
D2240
HARDNESS (Shore A)
37 +/- 5
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
400 min.
D624
TEAR Die C (lbs/in)
200 nom.
D1630
NBS ABRASION
65% nom
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7094-E (22-07-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-160 DURASHIELD features is a black version, compounded 路 AB-160 with added carbon black for maximum tear/abrasion resistance ASTM Grade Ideal for use in mining and aggregates
路 路
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
138-08-482 1
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
151 (68.5)
138-12-482 1
3/16 (4.76)
48 (1219.2)
200 (18.58)
50 (15.24)
226 (102.5)
138-16-482 1
1/4 (6.35)
48 (1219.2)
200 (18.58)
50 (15.24)
295 (133.8)
138-24-482 1
3/8 (9.52)
48 (1219.2)
200 (18.58)
50 (15.24)
441 (200)
138-32-482
1/2 (12.70)
48 (1219.2)
200 (18.58)
50 (15.24)
589 (267.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.7
7069-E 7053-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-160 SPECIFICATION ASTM D2000 : 4aa630a13f17 POLYMER : Natural Rubber (NR) (Black)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.15
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
400 min.
TEAR (Lbs/in.)
500 nom.
DIN ABRASION
Wet: 20mm3 Dry: 150mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : min. 10’ Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7053-E (17-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-162 DURASHIELD features Grade 路 astm 路 Ideal for use in mining and aggregates
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
162-16-482 1
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
212 (96.2)
162-24-482 1
3/8 (9.52)
48 (1219.2)
140 (13)
35 (10.66)
320 (145.2)
162-32-482 1
1/2 (12.70)
48 (1219.2)
140 (13)
35 (10.66)
423 (191.9)
162-48-482 1
3/4 (19)
48 (1219.2)
120 (11.15)
30 (9.14)
512 (232.2)
162-64-362 1
1 (25.4)
36 (914.4)
105 (9.8)
35 (10.66)
604 (274)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.8
7069-E 7054-E (05-06-2015)
TECHNICAL SPECIFICATIONS AB-162 SPECIFICATION ASTM D2000 : 4AA630A13F17 POLYMER : Natural Rubber (NR) (Black)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.15
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
400 min.
TEAR (Lbs/in.)
500 nom.
DIN ABRASION
Wet: 20mm3 Dry: 150mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : min. 10’ Specifications are for FACE ply only Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7054-E (05-06-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-940 DURASHIELD features Offers the ideal blend of high tear and 路 abrasion performance combined with
excellent durability and noise reduction Ideal for use in mining and aggregates ASTM Grade With one ply of nylon fabric in the back
路 路 路
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
139-04-482 1
1/16 (1.59)
48 (1219.2)
600 (55.75)
150 (45.72)
205 (93)
139-08-482
1/8 (3.7)
48 (1219.2)
140 (13)
35 (10.66)
97 (44)
139-12-482 1
3/16 (4.76)
48 (1219.2)
140 (13)
35 (10.66)
145 (65.8)
139-16-482
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
193 (87.5)
3/8 (9.52)
48 (1219.2)
140 (13)
35 (10.66)
290 (131.5)
139-24-482 1
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.9
7069-E 7055-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-940 SPECIFICATION ASTM D2000 : 4AA430A13B13F17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.06
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
350 nom.
DIN ABRASION
Wet: 40mm3 Dry: 160mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 (exception 1/16’’ = 2 pieces) Minimum piece length: 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ = +/- 10%, 35’ Rolls (1/8’’ to 1/2’’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7055-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS DURASHIELD A+ features stands for abrasion plus and defines 路 A+ the ultimate in abrasion resistant rubber in
路
both wet and dry applications. Formulated to withstand the most severe conditions, it is the best choice for the mining, cement, concrete, and aggregate sectors in applications where extreme abrasion resistance is critical. ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Orange
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
153-32-362 1
1/2 (12.70)
36 (914.4)
150 (13.93)
50 (15.24)
399 (181)
153-32-482
1/2 (12.70)
48 (1219.2)
200 (18.58)
50 (15.24)
532 (241.3)
153-48-362 1
3/4 (19.00)
36 (914.4)
75 (6.96)
25 (7.62)
286 (129.7)
153-48-482 1
3/4 (19.00)
48 (1219.2)
100 (9.29)
25 (7.62)
381 (172.8)
153-64-362
1 (25.40)
36 (914.4)
75 (6.96)
25 (7.62)
417 (189.2)
1
Made to order
This product is also available in slit widths, See Skirt-Shield A+ on p.8.13
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.10
7069-E 7056-E (10-09-2015)
TECHNICAL SPECIFICATIONS A+ SPECIFICATION ASTM D2000 : 4AA425A13B13F17 POLYMER : NR/BR (ORANGE)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.07
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ELONGATION (%)
600 min.
TEAR (Lbs/in.)
225 nom.
DIN ABRASION
Wet: 12mm3 Dry: 120mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 25% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : -0 / + 1’’ Length tolerance : 50’ Rolls (1/2’’), 25’ Rolls (3/4’’-1’’), min. 10’ TECHNICAL SPECIFICATIONS ARE ONLY FOR ORANGE DURASHIELD COMPOUND Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7056-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS DURASHIELD A+ 1 bonding layer features compound as DuraShield A+ with 路 ansame added special bonding layer Ideal for use in mining and aggregates 路 ASTM 路 Grade
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Orange
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
151-08-482
1/8 (3.7)
48 (1219.2)
140 (13)
35 (10.66)
98 (44.5)
151-12-482
3/16 (4.76)
48 (1219.2)
140 (13)
35 (10.66)
149 (67.6)
151-16-482
1/4 (6.35)
48 (1219.2)
140 (13)
35 (10.66)
194 (88)
151-16-552 1
1/4 (6.35)
55 (1397)
160 (14)
35 (10.66)
222 (100.7)
151-24-482
3/8 (9.52)
48 (1219.2)
140 (13)
35 (10.66)
300 (136.1)
151-24-552 1
3/8 (9.52)
55 (1397)
160 (14)
35 (10.66)
342 (155.1)
151-32-482
1/2 (12.70)
48 (1219.2)
140 (13)
35 (10.66)
417 (189.2)
151-24-552 1
3/8 (9.52)
55 (1397)
160 (14)
35 (10.66)
477 (216.4)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.11
7069-E 7056-E (03-06-2015)
TECHNICAL SPECIFICATIONS A+1 BONDING LAYER SPECIFICATION ASTM D2000 : 4AA425A13B13F17 POLYMER : NR/BR (ORANGE)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.07
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
225 nom.
DIN ABRASION
Wet: 12mm3 Dry: 120mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 25% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Maximum pieces per roll : 1 Width tolerance : - 0 / + 1’’ Length tolerance : 35’ Rolls (1/8’’ to 1/2’’), 25’ Rolls (1’’), min. 10’ TECHNICAL SPECIFICATIONS ARE ONLY FOR ORANGE DURASHIELD COMPOUND Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7056-E (03-06-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-140 SKIRT-SHIELD features tear resistance 路 High 路 Flexible 路 Same as our AB-140 路 ASTM Grade
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Red
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
132-16-064
1/4 (6.35)
6 (152.4)
---
50 (15.24)
34 (15.4)
132-16-084
1/4 (6.35)
8 (203.2)
---
50 (15.24)
45 (20.4)
132-24-064
3/8 (9.52)
6 (152.4)
---
50 (15.24)
51 (23.1)
132-24-084
3/8 (9.52)
8 (203.2)
---
50 (15.24)
68 (30.8)
132-32-064
1/2 (12.7)
6 (152.4)
---
50 (15.24)
68 (30.8)
132-32,084
1/2 (12.7)
8 (203.2)
---
50 (15.24)
90 (40.8)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.12
7069-E 7096-E (17-09-2015)
TECHNICAL SPECIFICATIONS SKIRT-SHIELD AB-140 SPECIFICATION ASTM D2000 : 4aa430a13b13f17 POLYMER : Natural Rubber (NR) (Red)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.06
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
350 nom.
DIN ABRASION
Wet: 40mm3 Dry: 160mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7096-E (17-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS SKIRT-SHIELD A+ features resistant, ideal for both wet 路 Abrasion and dry materials Flexible 路Same our DuraShield A+ 路 ASTMasGrade 路
GRADE
Premium
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Orange
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
153-16-064
1/4 (6.35)
6 (152.4)
---
50 (15.24)
34 (15.4)
153-16-084
1/4 (6.35)
8 (203.2)
---
50 (15.24)
45 (20.4)
153-24-064
3/8 (9.52)
6 (152.4)
---
50 (15.24)
51 (23.1)
153-24-084
3/8 (9.52)
8 (203.2)
---
50 (15.24)
68 (30.8)
153-32-064
1/2 (12.7)
6 (152.4)
---
50 (15.24)
68 (30.8)
153-32-084
1/2 (12.7)
8 (203.2)
---
50 (15.24)
90 (40.8)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.13
7069-E 7097-E (05-01-2016)
TECHNICAL SPECIFICATIONS SKIRT-SHIELD A+ SPECIFICATION ASTM D2000 : 4AA425A13B13F17 POLYMER : NR/BR (ORANGE)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.07
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
3300 nom.
ULTIMATE ELONGATION (%)
600 min.
TEAR (Lbs/in.)
225 nom.
DIN ABRASION
Wet: 12mm3 Dry: 120mm3
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 25% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: + 10 points max. Tensile: - 25% max. Elongation: -25% max.
D624
TEMPERATURE RANGE (general guideline)
-200 to 1800 F -290 to 820C
Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7097-E (05-01-2016)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-576 (NSF/ANSI 61) features product, see data sheet 路 Certified Excellent resistance to heat, ozone 路 and sunlight Superior resistance to cold and hot water 路 ASTM 路 Grade
GRADE
Specification
FINISH
Smooth
POWDER
No
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
386-04-482
1/16 (1.59)
48 (1219.2)
200 (18.6)
50 (15.24)
71 (32.2)
386-08-482
1/8 (3.7)
48 (1219.2)
100 (9.29)
25 (7.62)
71 (32.2)
386-12-482
3/16 (4.76)
48 (1219.2)
80 (7.43)
20 (6.10)
84 (38.1)
386-16-482
1/4 (6.35)
48 (1219.2)
80 (7.43)
20 (6.10)
114 (51.7)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.14
7069-E 7098-E (22-12-2015)
TECHNICAL SPECIFICATIONS AB-576 SPECIFICATION ASTM D2000 : 1BA715Z1 Z1 = Hardness Shore A 75 +/- 5 ASTM D1330 Grade 1 & 2 POLYMER : Ethylene-Propylene (EPDM)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.17
D2240
HARDNESS (Shore A)
75 +/- 5
D412
TENSILE (psi)
1500 min.
ULTIMATE ELONGATION (%)
250 min.
D2137
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
72 hrs 100 PPHM @ 400C No Cracking
D395B
COMPRESSION SET
22 hrs @ 700C 40% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +/- 15 points max. Tensile: +/- 30% max. Elongation: -50% max.
Pressure, Maximum, psig (bar) Maximum *P x T (1/16 inch)
250 (17) 30,000 (0F x psig)
TEMPERATURE RANGE (general guideline)
-400 to 2750F -400 to 1350C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Material is within RMA commercial gauge tolerances. NSF/ANSI-2013, section 9 at exposure rate of 0.2 in2/liter NSF/ANSI 61-2013, section 6 at commercial hot temperature (1800F) with exposure rate of 4.98 in2/liter *Pressure x Temperature Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails. 7069-E 7098-E (22-12-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS TG-65 TRANSEAL features Superior resistance to petroleum-based路 hydraulic fluids, wide range of service
temperatures, very good resistance to alkalis and acids Engineered specifically for electrical transformers, meets or exceeds M4094E specifications ASTM Grade
路
路
GRADE
Premium
FINISH
See chart below
POWDER
See chart below
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
306-04-362 1 **
1/16 (1.59)
36 (914.4) 3
300 (27.87)
100 (30.48)
120 (54.4)
306-04-482 1 **
1/16 (1.59)
48 (1219.2) 3
400 (37.16)
100 (30.48)
161 (73)
3/32 (2.38)
48 (1219.2) 3
300 (27.87)
75 (22.85)
175 (79.4)
1/8 (3.7)
36 (914.4) 3
150 (13.93)
50 (15.24)
117 (53.1)
1/8 (3.7)
48 (1219.2) 2
200 (18.58)
50 (15.24)
156 (70.8)
3/16 (4.76)
36 (914.4) 3
120 (11.5)
40 (12.19)
143 (64.9)
306-12-482
3/16 (4.76)
48 (1219.2) 2
160 (14.86)
40 (12.19)
189 (85.7)
306-16-362 **
1/4 (6.35)
36 (914.4) 3
120 (11.15)
40 (12.19)
188 (85.3)
306-16-482
1/4 (6.35)
48 (1219.2) 2
160 (14.86)
40 (12.19)
250 (113.4)
306-20-362 1 **
5/16 (7.94)
36 (914.4) 3
120 (11.15)
40 (12.19)
231 (104.8)
306-20-482
5/16 (7.94)
48 (1219.2) 2
160 (14.86)
40 (12.19)
308 (139.7)
306-24-362**
3/8 (9.52)
36 (914.4) 3
90 (8.36)
30 (9.14)
208 (94.3)
3/8 (9.52)
48 (1219.2) 2
120 (11.15)
30 (9.14)
281 (127.5)
1/2 (12.70)
48 (1219.2) 2
120 (11.15)
30 (9.14)
375 (170.1)
1/8 (3.7)
48 (1219.2) 3
200 (18.58)
50 (15.24)
152 (68.9)
3/16 (4.76)
48 (1219.2) 3
160 (14.86)
40 (12.2)
189 (85.7)
SLABS
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/SLAB IN (MM)
WEIGHT/SLAB LBS (KG)
306-08-365
1/8 (3.7)
36 (914.4) 2
9 (0.836)
36 (914.4)
7 (3.2)
306-12-365
3/16 (4.76)
36 (914.4) 2
9 (0.836)
36 (914.4)
12 (5.4)
306-16-365
1/4 (6.35)
36 (914.4) 2
9 (0.836)
36 (914.4)
14 (6.4)
5/16 (7.90)
36 (914.4) 2
9 (0.836)
36 (914.4)
17 (7.7)
36 (914.4) 2
9 (0.836)
36 (914.4)
21 (9.5)
306-06-482 1 ** 306-08-362 1 ** 306-08-482 306-12-362 **
306-24-482 1 306-32-482 1 308-08-482** 1 308-12-482** 1
306-20-365
306-24-365 3/8 (9.52) 1Made to order. 2 Buffed one side.3 Smooth both sides.** Powdered.
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.15
7069-E 7029-E (05-03-2015)
TECHNICAL SPECIFICATIONS TG-65 SPECIFICATION Industry spec CGE M4094E, ABB Europe and HQ SN 14.1 POLYMER : Nitrile (NBR) (Buna N)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.17
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
2400
ULTIMATE ELONGATION (%)
500
D2137
COLD TEMPERATURE
-300C min.
D395B
COMPRESSION SET
70 hrs @ 1000C 16% max.
D573
HEAT AGING
3 weeks @ 1200C Changed Hardness: 18 points Tensile: 2% max. Elongation: -66% max. (all values nom.)
D471
OIL AGING (#3)
4 weeks @ 1250C Voltesso 35 Oil Changed Hardness: 3 points Tensile: -60% max. Elongation: -78% max. Mass: 10% Volume: 12% (all values nom.)
TEMPERATURE RANGE (general guideline)
-200 to 2000 F -290 to 930C
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : +/- 10% Special thickness tolerances apply to TG-65 skus. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7029-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-168 aashtO grade features Natural (NR) sheet rubber meets AASHTO 路 specifications for highway bridge bearing pads ASTM Grade
路
GRADE
AASHTO
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
226-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
391 (177.4)
226-40-482 1
5/8 (15.90)
48 (1219.2)
120 (11.15)
30 (9.14)
481 (218.2)
226-48-482 1
3/4 (19.00)
48 (1219.2)
100 (9)
25 (7.6)
472 (213.9)
226-64-362 1
1 (25.40)
36 (914.4)
75 (7)
25 (7.6)
438 (198.4)
226-64-482 1
1 (25.40)
48 (1219.2)
100 (9)
25 (7.6)
583 (264.4)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.16
7069-E 7059-E (05-03-2015)
TECHNICAL SPECIFICATIONS AB-168 SPECIFICATION : AASHTO (see note below) POLYMER : Natural Rubber (NR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.13
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
2250 min.
ULTIMATE ELONGATION (%)
450 min.
D746B
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
48 hrs 25 PPHM @ 37.70C 20% Strain, No Cracks
D395B
COMPRESSION SET
22 hrs @ 700C 25% max.
D573
HEAT AGING
168 hrs @ 700C Changed Hardness: + 10 points Tensile: -25% max. Elongation: -25% max.
Maximum pieces per roll : 1/4’’ to 1/2’’ = 2 pieces, over 1/2’’ = 1 piece Minimum piece length : 10’ Width tolerance : 36’’ = -0 / +.236 in (6mm), 48’’ = -0 / +.472 in (12mm) Length tolerance : 1/4’’ to 1/2’’ = -0 /+10%, over 1/2’’ = +10%, min. 10’ Gauge tolerance: < 1.259 in (32mm) = -0 / +.118 in (3mm), > 1.259 in (32mm) = -0 / +.236 in (6mm) Note : Meets AASHTO Standard Specifications for Highway Bridges, 17th edition, 2002, Division ll - Construction : Section 18 - Bearings, table 18.4.5.1-1B Material Tests - polyisoprene, Grade 4. AASHTO Standard Specifications for Transportation Materials and Methods of Sampling and Testing, 22nd Edition, 2002, M251-06 (2011), Polyisoprene Grade 4. It is not uncommon for certain states to specify requirements other than standard AASHTO specifications. Please identify all requirements prior to ordering. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7059-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-258 aashtO grade features
路
Neoprene blend (CR) sheet rubber meets AASHTO specifications for highway bridge bearing pads ASTM Grade
路
GRADE
AASHTO
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
205-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
318 (144.2)
205-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.14)
429 (194.5)
1
Made to order,
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.17
7069-E 7089-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-258 SPECIFICATION : AASHTO (see note below) POLYMER : NEOPRENE BLEND
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.22
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
2250 min.
ULTIMATE ELONGATION (%)
400 min.
D746B
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
100 hrs 100 PPHM @ 37.70C 20% Strain, No Cracks
D395B
COMPRESSION SET
22 hrs @ 1000C 35% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 15 points Tensile: -15% max. Elongation: -40% max.
Maximum pieces per roll : 1/4’’ to 1/2’’ = 2 pieces, over 1/2’’ = 1 piece Minimum piece length : 10’ Width tolerance : 36’’ = -0 / +.236 in (6mm), 48’’ = -0 / +.472 in (12mm) Length tolerance : 1/4’’ to 1/2’’ = -0 /+10%, over 1/2’’ = +10%, min. 10’ Gauge tolerance: < 1.259 in (32mm) = -0 / +.118 in (3mm), > 1.259 in (32mm) = -0 / +.236 in (6mm) AASHTO standard specification for plain and laminated elastomeric bridge bearing pads, M251-06 (2011), polychloroprene, grades 0, 2, and 3 AASHTO LRFD bridge construction specification 3rd ed, 2010, section 18.2 It is not uncommon for certain states to specify requirements other than standard AASHTO specifications. Please identify all requirements prior to ordering. Note: Shear modulus testing must be done on completed bridge bearing and is the responsibility of the bridge bearing manufacturer. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7089-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-268 aashtO grade features Neoprene blend sheet rubber meets 路 AASHTO specifications for highway bridge bearing pads ASTM Grade
路
GRADE
AASHTO
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
206-08-362 1
1/8 (3.7)
36 (914.4)
150 (13.93)
50 (15.24)
130 (59)
206-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
318 (144.2)
206-32-482
1/2 (12.70)
48 (1219.2)
120 (11.15)
30 (9.1)
479 (217.3)
206-48-482
3/4 (19.00)
48 (1219.2)
100 (9.29)
25 (7,6)
578 (262)
206-56-482 1
7/8 (22.23)
48 (1219.2)
60 (6)
15 (4.6)
404 (183.3)
206-64-482
1 (25.40)
48 (1219.2)
100 (9)
25 (7.6)
728 (330.2)
1
Made to order,
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.18
7069-E 7080-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-268 SPECIFICATION : AASHTO (see note below) POLYMER : NEOPRENE BLEND
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.25
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
2250 min.
ULTIMATE ELONGATION (%)
350 min.
D746B
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
100 hrs @ 100 PPHM @ 37.70C 20% Strain, No Cracking
D395B
COMPRESSION SET
22 hrs @ 1000C 35% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 15 points Tensile: -15% max. Elongation: -40% max.
Maximum pieces per roll : 1/16’’ to 1/2’’ = 2 pieces, over 1/2’’ = 1 piece Minimum piece length : 10’ Width tolerance : -0 / + 1’’ Length tolerance : 1/16’’ to 1/2’’ = -0 / +10% // over 1/2’’ = +10%, min. 10’) Gauge tolerance: < 1.259 in (32mm) = -0 / +.118 in (3mm), > 1.259 in (32mm) = -0 / +.236 in (6mm) AASHTO standard specification for plain and laminated elastomeric bridge bearing pads, M251-06 (2011), polychloroprene, grades 0, 2, and 3 AASHTO LRFD bridge construction specification 3rd ed, 2010, section 18.2 It is not uncommon for certain states to specify requirements other than standard AASHTO specifications. Please identify all requirements prior to ordering. Note: Shear modulus testing must be done on completed bridge bearing and is the responsibility of the bridge bearing manufacturer. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7080-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-278 aashtO grade features Neoprene (CR) blend sheet rubber meets 路 AASHTO specifications for highway bridge bearing pads ASTM Grade
路
GRADE
AASHTO
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
207-08-482
1/8 (3.7)
48 (1219.2)
200 (18.58)
50 (15.24)
176 (79.7)
207-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
318 (144.2)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.19
7069-E 7090-E (10-09-2015)
TECHNICAL SPECIFICATIONS AB-278 SPECIFICATION : AASHTO (see note below) POLYMER : NEOPRENE BLEND
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.28
D2240
HARDNESS (Shore A)
70
D412
TENSILE (psi)
2250 min.
ULTIMATE ELONGATION (%)
300 min.
D746B
COLD TEMPERATURE
-400C min.
D1171
OZONE RESISTANCE
100 hrs 100 PPHM @ 37.70C 20% Strain, No Cracks
D395B
COMPRESSION SET
22 hrs @ 1000C 35% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: + 15 points Tensile: -15% max. Elongation: -40% max.
Maximum pieces per roll : 1/4’’ to 1/2’’ = 2 pieces, over 1/2’’ = 1 piece Minimum piece length : 10’ Width tolerance : 36’’ = -0 / +.236 in (6mm), 48’’ = -0 / +.472 in (12mm) Length tolerance : 1/4’’ to 1/2’’ = -0 /+10%, over 1/2’’ = +10%, min. 10’ Gauge tolerance: < 1.259 in (32mm) = -0 / +.118 in (3mm), > 1.259 in (32mm) = -0 / +.236 in (6mm) AASHTO standard specification for plain and laminated elastomeric bridge bearing pads, M251-06 (2011), polychloroprene, grades 0, 2, and 3 AASHTO LRFD bridge construction specification 3rd ed, 2010, section 18.2 It is not uncommon for certain states to specify requirements other than standard AASHTO specifications. Please identify all requirements prior to ordering. Note: Shear modulus testing must be done on completed bridge bearing and is the responsibility of the bridge bearing manufacturer. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7090-E (10-09-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS u.s. military specification grade mil-prf-1149 type I, class 1
features blend 路 Neoprene aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking designed to meet the 路 Specifically requirements of the U.S. military
GRADE
Military
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
25M-04-362
1/16 (1.59)
36 (914.4)
231 (21.46)
77 (23.47)
100 (45.4)
25M-08-362
1/8 (3.7)
36 (914.4)
114 (10.59)
38 (11.58)
99 (44.9)
25M-12-362 1
3/16 (4.76)
36 (914.4)
78 (7.24)
26 (7.92)
102 (46.3)
25M-16-362 1
1/4 (6.35)
36 (914.4)
60 (5.57)
20 (6.09)
105 (47.6)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.20
7069-E 7062-E (05-03-2015)
TECHNICAL SPECIFICATIONS MIL-PRF-1149 type I, class 1 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.35
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D2137
COLD TEMPERATURE
-290C min.
D395B
COMPRESSION SET
94 hrs @ 700C 75% max.
D573
HEAT AGING
94 hrs @ 700C Changed Hardness: 10 points max. Tensile: -20% max. Elongation: -35% max.
D471
OIL AGING (3#)
70 hrs @ 1000C Changed Volume: 120% max.
FLUID RESISTANCE (Water)
1 hr @ 1000C Changed Mass: 0.05% max.
Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7062-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS u.s. military specification grade mil-prf-1149 type I, class 2
features sbr 路 specifically to meet the 路 requirementsdesigned of the U.S. military
GRADE
Military
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
15M-08-362 1
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
1/8 (3.7)
36 (914.4)
114 (10.59)
38 (11.58)
87 (39.5)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.21
7069-E 7063-E (05-03-2015)
TECHNICAL SPECIFICATIONS MIL-PRF-1149 type I, class 2 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.35
D2240
HARDNESS (Shore A)
50
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
300 min.
D2137
COLD TEMPERATURE
-290C min.
D395B
COMPRESSION SET
94 hrs @ 700C 75% max.
D573
HEAT AGING
94 hrs @ 700C Changed Hardness: 10 points max. Tensile: -20% max. Elongation: -35% max.
D471
FLUID RESISTANCE (Water)
1 hr @ 1000C Changed Mass: 0.05% max.
Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7063-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS u.s. military specification grade mil-prf-1149 type II, class 1
features blend 路 neoprene aging to alkalis and acids 路 Natural Good resistance to flame, abrasion 路 and flex cracking designed to meet the 路 Specifically requirements of the U.S. military
GRADE
Military
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
26M-04-362 1
1/16 (1.59)
36 (914.4)
225 (20.9)
75 (22.85)
103 (46.7)
26M-08-362
1/8 (3.7)
36 (914.4)
117 (10.87)
39 (11.88)
107 (48.5)
26M-12-362 1
3/16 (4.76)
36 (914.4)
78 (7.24)
26 (7.92)
107 (48.5)
26M-16-362 1
1/4 (6.35)
36 (914.4)
78 (7.24)
26 (7.92)
143 (64.9)
1
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.22
7069-E 7064-E (05-03-2015)
TECHNICAL SPECIFICATIONS MIL-PRF-1149 type II, class 1 POLYMER : CR/SBR
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.41
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
250 min.
D2137
COLD TEMPERATURE
-290C min.
D395B
COMPRESSION SET
94 hrs @ 1000C 75% max.
D573
HEAT AGING
94 hrs @ 700C Changed Hardness: 10 points max. Tensile: -20% max. Elongation: -35% max.
D471
OIL AGING (3#)
70 hrs @ 1000C Changed Volume: 120% max.
FLUID RESISTANCE (Water)
1 hr @ 1000C Changed Mass: 0.05% max.
Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7064-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS u.s. military specification grade mil-prf-1149 type II, class 2
features sbr 路 Specifically to meet the 路 requirementsdesigned of the U.S. military
GRADE
Military
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
16M-08-362 1
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
1/8 (3.7)
36 (914.4)
105 (9.75)
35 (10.66)
101 (45.8)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.23
7069-E 7065-E (05-03-2015)
TECHNICAL SPECIFICATIONS MIL-PRF-1149 type II, class 2 POLYMER : Styrene-Butadiene (SBR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.5
D2240
HARDNESS (Shore A)
65
D412
TENSILE (psi)
1000 min.
ULTIMATE ELONGATION (%)
250 min.
D2137
COLD TEMPERATURE
-290C min.
D395B
COMPRESSION SET
94 hrs @ 1000C 75% max.
D573
HEAT AGING
94 hrs @ 700C Changed Hardness: 10 points max. Tensile: -20% max. Elongation: -35% max.
D471
FLUID RESISTANCE (Water)
1 hr @ 1000C Changed Mass: 0.05% max.
Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7065-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS u.s. military specification grade mil-6855 class 2, grade 60
features grade neoprene · Premium Excellent resistance to weather · and ozone aging to alkalis and acids · Natural Good resistance to flame, abrasion · and flex cracking ASTM Grade · Specifically to meet the · requirementsdesigned of the U.S. military
20M-08-362 1 1
GRADE
Military
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
1/8 (3.7)
36 (914.4)
117 (10.87)
39 (11.88)
101 (45.8)
Made to order
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.24
7069-E 7060-E (05-03-2015)
TECHNICAL SPECIFICATIONS MIL-6855 class 2, grade 60 SPECIFICATION ASTM D2000 : 2BC625A14C12E034 POLYMER : Neoprene® (CR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.31
D2240
HARDNESS (Shore A)
60
D412
TENSILE (psi)
2500 min.
ULTIMATE ELONGATION (%)
350 min.
D1171
OZONE RESISTANCE
70 hrs 100 PPHM @ 400C 20% No Cracks
D395B
COMPRESSION SET
22 hrs @ 1000C 50% max.
D573
HEAT AGING
70 hrs @ 1000C Changed Hardness: +15 points max. Tensile: -15% max. Elongation: -15% max.
D471
OIL AGING (3#)
70 hrs @ 1000C Changed Hardness: +30 points max. Tensile: -50% max. Elongation: -40% max. Volume: +/- 10%
TEMPERATURE RANGE (general guideline)
-220 to 2120 F -300 to 1000C
Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
7069-E 7060-E (05-03-2015)
WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
SPECIALTY PRODUCTS AB-139 - BLAST features Specifically designed for ballistic · applications Ideal for all types of ranges, curtain or · wall applications self-healing qualities · Has Less airborne lead dust & diminishes · dangerous ricochet · ASTM Grade
GRADE
Industrial
FINISH
Smooth
POWDER
Yes
TRIMMED
Yes
COLOR
Black
GAUGE IN (MM)
WIDTH IN (MM)
SURFACE/ROLL SFT (M2)
LENGTH/ROLL LFT (M)
WEIGHT/ROLL LBS (KG)
141-08-362 1
1/8 (3.7)
36 (914.4)
120 (11.15)
40 (12.2)
86 (39.1)
141-08-482
1/8 (3.7)
48 (1219.2)
160 (14.86)
40 (12.2)
111 (50.3)
141-16-482
1/4 (6.35)
48 (1219.2)
160 (14.86)
40 (12.2)
222 (100.7)
141-24-482
3/8 (9.52)
48 (1219.2)
120 (11.15)
30 (9.1)
260 (117.9)
141-32-482
1/2 (12.7)
48 (1219.2)
200 (18.58)
50 (15.24)
586 (265.8)
1
Made to order
BLAST.AMERICAN-BILTRITE.COM WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
8.25
7069-E 7068-E (25-03-2015)
SPECIALTY PRODUCTS TECHNICAL SPECIFICATIONS AB-139 SPECIFICATION ASTM D2000 : 2AA420A13F17 POLYMER : Natural Rubber (NR)
ASTM
DESCRIPTION
VALUE
SPECIFIC GRAVITY (gr/cc)
1.14
D2240
HARDNESS (Shore A)
40
D412
TENSILE (psi)
2000 min.
ULTIMATE ELONGATION (%)
400 min.
D2137
COLD TEMPERATURE
-400C min.
D395B
COMPRESSION SET
22 hrs @ 700C 50% max.
D573
HEAT AGING
70 hrs @ 700C Changed Hardness: +/- 5 points max. Tensile: +/- 30% max. Elongation: -50% max.
TEMPERATURE RANGE (general guideline)
-200 to 1800 F (-290 to 820 C)
Maximum pieces per roll : 2 Minimum piece length : 10’ Width tolerance : -0 / +1’’ Length tolerance : 1/16’’ to 1/2’’ +/- 10% (5/8’’ to 1’’ + 10%, Min. 10’) Material is within RMA commercial gauge tolerances. Please ensure the product meets your application specification prior to order placement. Specifications are subject to change without notice. The website version prevails.
BLAST.AMERICAN-BILTRITE.COM WWW.AMERICAN-BILTRITE.COM 1 888-275-7075
7069-E 7068-E (25-03-2015)
appendix 1 METRIC CONVERSION CHART FRACTION DECIMAL MILLIMETERS FRACTION DECIMAL MILLIMETERS 1/64.................... 0.0156..........................0.3969 33/64.................. 0.5156........................13.0969 1/32.................... 0.0312..........................0.7938 17/32.................. 0.5312........................13.4938
3/64.................... 0.0469..........................1.1906 35/64.................. 0.5469........................13.8906 1/16.................... 0.0625..........................1.5875 9/16.................... 0.5625........................14.2875 5/64.................... 0.0781..........................1.9844 37/64.................. 0.5781........................14.6844 3/32.................... 0.0938..........................2.3812 19/32.................. 0.5938........................15.0812 7/64.................... 0.1094..........................2.7781 39/64.................. 0.6094........................15.4781 1/8..................... 0.1250............................3.750 5/8..................... 0.6250........................15.8750 9/64.................... 0.1406..........................3.5719 41/64.................. 0.6406........................16.2719 5/32.................... 0.1562..........................3.9688 21/32.................. 0.6562........................16.6688 11/64................... 0.1719..........................4.3656 43/64.................. 0.6719........................17.0656 3/16.................... 0.1875..........................4.7625 11/16................... 0.6875........................17.4625 13/64.................. 0.2031..........................5.1594 45/64.................. 0.7031........................17.8594 7/32.................... 0.2188..........................5.5562 23/32.................. 0.7188........................18.2562 15/64.................. 0.2344..........................5.9531 47/64.................. 0.7344........................18.6531 1/4..................... 0.2500..........................6.3500 3/4..................... 0.7500........................19.0500 17/64.................. 0.2656..........................6.7469 49/64.................. 0.7656........................19.4469 9/32.................... 0.2812..........................7.1438 25/32.................. 0.7812........................19.8438 19/64.................. 0.2969..........................7.5406 51/64.................. 0.7969........................20.2406 5/16.................... 0.3125..........................7.9375 13/16.................. 0.8125........................20.6375 21/64.................. 0.3281..........................8.3344 53/64.................. 0.8281........................21.0344 11/32................... 0.3438..........................8.7312 27/32.................. 0.8438........................21.4312 23/64.................. 0.3594..........................9.1281 55/64.................. 0.8594........................21.8281 3/8..................... 0.3750..........................9.5250 7/8..................... 0.8750........................22.2250 25/64.................. 0.3906..........................9.9219 57/64.................. 0.8906........................22.6219 13/32.................. 0.4062........................10.3188 29/32.................. 0.9062........................23.0188 27/64.................. 0.4219........................10.7156 59/64.................. 0.9219........................23.4156
11.1125 15/16.................. 0.9375........................23.8125 29/64.................. 0.4531........................ 11.5094 61/64.................. 0.9531........................24.2094 15/32.................. 0.4688........................ 11.9062 31/32.................. 0.9688........................24.6062 31/64.................. 0.4844........................12.3031 63/64.................. 0.9844........................25.0031 1/2..................... 0.5000........................12.7000 1....................... 1.0000........................25.4000 7/16.................... 0.4375........................
7069-E (04-03-2011)
appendix 2 RMA COMMERCIAL GAUGE TOLERANCES Unless otherwise stated, American Biltrite uses RMA commercial gauge tolerances for all our sheet rubber and diaphragm sheet products. Nominal Thickness (To, but not including)
ToleranceS Plus or minus (+/-)
FRACTIONS (IN) DECIMALS (IN) MILLIMETERS INCHES MILLIMETERS Under 1/32........... 0.031..................... Under 0.80 0.010.........................................................0.25 1/32.....................
0.031...............................0.80 1/16..................... 0.062...............................1.60 1/8...................... 0.125...............................3.20 3/16..................... 0.187...............................4.80 3/8...................... 0.375...............................9.50 9/16..................... 0.562.............................14.30 3/4...................... 0.750.............................19.20 1 and over........... 1 and over........ 25.40 and over
0.012...........................................................0.3 0.016...........................................................0.4 0.020...........................................................0.5 0.031...........................................................0.8 0.047...........................................................1.2 0.063...........................................................1.6 0.093............................................................24 10%...........................................................10%
7069-E (04-03-2011)
appendix 3 astm grade type and class
SUFFIX LETTERS most common polymer A...................................................Heat Resistance
AA.............................................Natural, SBR, Buty B................................................. Compression Set BA.......................................................EPDM, Butyl C.............................Ozone or Weather Resistance BC.......................................................... Neoprene D..................Compression - Deflection Resistance BE........................................................... Neoprene EO............. Fluid Resistance (Oils and Lubricants) BF..................................................................Nitrile F.............................. Low Temperature Resistance BG.................................................................Nitrile G................................................... Tear Resistance BK..................................................................Nitrile H................................................... Flex Resistance CA.................................................................EPDM J............................................. Abrasion Resistance CE.............................................................Hypalon K.............................................................. Adhesion CH.................................................................Nitrile L.................................... Aqueous Fluid Resistance DA.................................................................EPDM M...................................... Flammability Resistance DE.............................................................Hypalon N............................................... Impact Resistance FC.............................................................. Silicone P............................................. Staining Resistance FE.............................................................. Silicone R............................................................ Resilience FK..........................................Fluorinated Silicones Z..................................Any Special Requirements, GE............................................................. Silicone ..............................wich shall be specified in detail HK..................................................................Viton
Classifications
A Line Call-Out (Or Specification) shall contain :
Temperature OIL SWELL (Volume Swell, Max. %)
EXAMPLE : 2BC507A14EO34
B.................100°C B..................................... 140
2..................................................................... Grade Number BC............................. Material designation (Type and Class) 507........................................Hardness and Tensile Strength
- First digit “5” is Durometer - i.e. 50 Duro - Second and third digits are Tensile - i.e. 700
SUFFIX REQUIREMENTS A14, EO34, Etc. A...................................................................Heat Resistance 1.............................................................................. 70 Hours 4...................................................................................100°C EO............................. Fluid Resistance (Oils and Lubricants) 3...................................................................#3 Oil, 70 Hours 4...................................................................................100°C 7069-E (04-03-2011)
a...................70°C A.................No Requirement C.................125°C C.................................... 120 D.................150°C D.................................... 100 E.................175°C E....................................... 80 F.................200°C F....................................... 60 G.................225°C G...................................... 40 H.................250°C H...................................... 30 J..................275°C J....................................... 20 . K....................................... 10
40
40
40
37 +/- 5
AB-135
AB-138
AB-139 BLAST
AB-148
2500 min.
2000 min
2000 min.
2500 min.
2500 min.
TENSILE PSI
400 min.
400 min
400 min.
400 min.
500 min.
IM-165 Skirtboard IM-166 Skirtboard
1000 nom
500 nom
60
60
300 nom
300 nom
200 nom
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN.
SECTION 2 : SBR (PACKING AND SKIRTBOARD)
35
AB-131
SECTION 1 : NATURAL
HARDNESS (SHORE A) HEAT AGING
70 hrs @ 700C Changed Hardness: ± 5 points max. Tensile: ± 30% max. Elongation: -50% max. 70 hrs. @ 70°C Changed Wet: 39mm³ Hardness: 15 points max. Dry: 176mm³ Tensile: ± 30% max. Elongation: -50% max. 70 hrs. @ 70°C Changed Hardness: 15 points max. Tensile: ± 30% max. Elongation: -50% max. 70 hrs. @ 70°C Changed: Hardness: ± 5 points max. Tensile.: ± 30% max. Elongation -50% max 70 hrs. @ 70°C Changed Hardness: ±15 points max. Tensile: ± 30% max. Elongation: -50% max.
DIN ABRASION
product COMPARISON CHART
appendix 4 OIL RESISTANCE (OIL NO3)
MULLEN BURST 1PLY PSI
Page 1 of 10 // 7069-E (24/11/2015)
-20° to 180°F (-29° to 82°C) -20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-200 to 1800 F (-290 to 820 C)
TEMPERATURE RANGE
80
75
75
AB-617
IM-618
AB-619
600 min.
400 nom.
500 min.
700 min.
TENSILE PSI
50
60
70
50
AB-250
AB-260
AB-270
IM-252
500 nom.
600 min.
600 min.
600 min.
SECTION 3 : NEOPRENE
80
AB-613
HARDNESS (SHORE A)
appendix 4
300 nom.
200 min.
300 min.
300 min.
100 min.
220 nom.
100 min.
150 min.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN. DIN ABRASION
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
OIL RESISTANCE (OIL NO3)
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
70 hrs. @ 70°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
94 hrs @ 70°C Changed Tensile: -25% max Elongation: -25% max 70 hrs. @ 70°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
HEAT AGING
MULLEN BURST 1PLY PSI
Page 2 of 10 // 7069-E (24/11/2015)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 200°F (-29° to 93°C)
TEMPERATURE RANGE
60
70
40
50
60
70
80
50
IM-262
IM-272
AB-245
AB-255
AB-265
AB-275
AB-285
AB-253
HARDNESS (SHORE A)
800 min.
1000 min.
1000 min.
1000 min.
1000 min.
1000 min.
500 nom.
500 nom.
TENSILE PSI
appendix 4
300 min.
100 min.
200 min.
300 min.
300 min.
400 min.
200 nom.
300 nom.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN. DIN ABRASION
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max. 70 hrs. @ 100°C Changed Tensile: -70 % max. Elongation: -55% max Volume: 120% max.
70 hrs. @ 100°C Changed Hardness: ±15 points max. Tensile: ±15% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs. @ 100°C Changed Hardness: ±15 points max. Tensile: ±15% max Elongation: -40% max.
OIL RESISTANCE (OIL NO3)
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
HEAT AGING
MULLEN BURST 1PLY PSI
Page 3 of 10 // 7069-E (24/11/2015)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
TEMPERATURE RANGE
70
80
AB-273
AB-289
40
60
50
AB-344
AB-364
AB-355
SECTION 4 : NITRILE
60
AB-263
HARDNESS (SHORE A)
2000 min.
1000 min.
1000 min.
1000 min.
1000 min.
900 min.
TENSILE PSI
appendix 4
350 min.
350 min.
500 min.
100 min.
200 min.
300 min.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN. DIN ABRASION
-40° to 200°F (-40° to 93°C)
70 hrs. @ 100°C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max Volume: 0 to 25% max 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
MULLEN BURST 1PLY PSI
Page 4 of 10 // 7069-E (24/11/2015)
-30° to 190°F (-34° to 88°C)
-20° to 190°F (-29° to 88°C)
-20° to 190°F (-29° to 88°C)
70 hrs @ 100°C Volume changed: 80% max.
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
-20° to 190°F (-29° to 88°C)
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
70 hrs. @ 100°C Changed Tensile: -60% max. Elongation: -50% max Volume: 100% max.
70 hrs. @ 100°C Changed Hardness: ±15 points max. Tensile: -15% max Elongation: -40% max.
-20° to 190°F (-29° to 88°C)
70 hrs @ 100°C Volume changed: 80% max.
70 hrs. @ 100°C Changed Tensile: -60% max. Elongation: -50% max Volume: 100% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: -15% max Elongation: -40% max.
TEMPERATURE RANGE
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
OIL RESISTANCE (OIL NO3)
HEAT AGING
70
60
AB-375
AB-366
60
50
60
AB-553
AB-563
SECTION 6 : EPDM
AB-465
SECTION 5 : BUTYL
60
AB-365
HARDNESS (SHORE A)
800 min.
800 min.
1000 min.
1000 min.
2500 min.
2500 min.
TENSILE PSI
appendix 4
300 min.
300 min.
300 min.
300 min.
300 min.
350 min.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN. DIN ABRASION
70 hrs @ 100°C Changed Hardness: +10 points max. Tensile: -25% max Elongation: -25% max. 70 hrs @ 100°C Changed Hardness: +10 points max. Tensile: -25% max Elongation: -25% max.
70 hrs @ 100°C Changed Hardness: +10 points max. Tensile: -25% max Elongation: -25% max.
70 hrs. @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
HEAT AGING
70 hrs @ 100°C Volume changed: 60% max.
70 hrs. @ 100°C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max Volume: 0 to 25% max 70 hrs. @ 100°C Changed Hardness: -10 to +5 points max. Tensile: -45% max. Elongation: -45% max Volume: 0 to 25% max
OIL RESISTANCE (OIL NO3)
MULLEN BURST 1PLY PSI
Page 5 of 10 // 7069-E (24/11/2015)
-40° to 250°F (-40° to 121°C)
-40° to 250°F (-40° to 121°C)
-30° to 212°F (-34° to 100°C)
-40° to 200°F (-40° to 93°C)
-40° to 200°F (-40° to 93°C)
-40° to 200°F (-40° to 93°C)
TEMPERATURE RANGE
60 +/- 5
1000 min.
TENSILE PSI
300 min.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN.
65
65
80
60
65
70
AB-951
IM-950
AB-984
AB-2102
IM-2100
AB-3205
1400 min.
500 nom
700 min.
500 min.
600 nom.
600 min.
250 min.
250 min.
100 min.
300 min.
SECTION 7: FABRIC REINFORCED RUBBER
AB-566
HARDNESS (SHORE A)
appendix 4 DIN ABRASION
700 psi nom.
Page 6 of 10 // 7069-E (24/11/2015)
-20° to 212°F (-29° to 100°C)
300 psi nom.
-20° to 180°F (-29° to 82°C) 70 hrs @ 100°C Changed Hardness: +15 points max. Tensile: -15% max Elongation: -40% max.
300 psi nom.
-20° to 180°F (-29° to 82°C)
70 hrs @ 70°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
300 psi nom.
-20° to 190°F (-29° to 88°C)
300 psi nom.
300 psi nom.
MULLEN BURST 1PLY PSI
-20° to 190°F (-29° to 88°C)
-40° to 250°F (-40° to 121°C)
TEMPERATURE RANGE
-20° to 180°F (-29° to 82°C)
Changed: Hardness: ±10 points max. Tensile: -70% max. Elongation: -55% max Volume: +120% max.
70 hrs @ 100°C Volume changed: 120% max.
OIL RESISTANCE (OIL NO3)
70 hrs @ 70°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max.
22 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: -30% max Elongation: ± 50% max.
HEAT AGING
65
65
70
60
AB-3220
AB-3228
AB-3275
AB-3560
800 min.
1200 min.
600 min.
600 min.
1400 min.
TENSILE PSI
250 min.
250 min.
300 min.
300 min.
250 min.
40
40
AB-140
AB-142
600 min.
600 min.
3300 nom.
3300 nom.
350 nom.
350 nom.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN.
SECTION 8 : SPECIALTY PRODUCTS
70
AB-3210
HARDNESS (SHORE A)
appendix 4
600 psi nom.
-20° to 190°F (-29° to 88°C)
-40° to 250°F (-40° to 121°C)
70 hrs @ 100°C Volume changed: 120% max.
Page 7 of 10 // 7069-E (24/11/2015)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
600 psi nom.
-20° to 190°F (-29° to 88°C)
70 hrs @ 100°C Volume changed: 120% max.
600 psi nom.
-20° to 190°F (-29° to 88°C)
800 psi nom.
800 psi nom.
MULLEN BURST 1PLY PSI
70 hrs @ 100°C Volume changed: 120% max.
-20° to 212°F (-29° to 100°C)
Changed: Hardness: ±10 points max. Tensile: -70% max. Elongation: -55% max Volume: +120% max.
70 hrs @ 100°C Changed Hardness: +15 points max. Tensile: -15% max Elongation: -40% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs. @ 100°C Changed Hardness: ±15 points max. Tensile: ±30% max Elongation: -50% max. 70 hrs @ 100°C Changed Hardness: +10 points max. Tensile: -25% max Elongation: -25% max.
TEMPERATURE RANGE
OIL RESISTANCE (OIL NO3)
HEAT AGING
70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 160mm³ Tensile: -25% max Elongation: -25% max. 70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 160mm³ Tensile: -25% max Elongation: -25% max.
DIN ABRASION
60
60
40
37 +/- 5
60
60
40
AB-144
AB-146
AB-147
AB-148
AB-160
AB-162
AB-940
HARDNESS (SHORE A)
400 min.
400 min.
600 min.
3300 nom.
3300 nom.
3300 nom.
600 min.
3300 nom.
400 min.
400 min.
3300 nom.
2500 min.
450 min
350 nom.
500 nom.
500 nom.
200 nom
450 nom.
450 nom.
450 nom.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN.
3300 nom.
TENSILE PSI
appendix 4 HEAT AGING
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
70 hrs. @ 70°C Changed Wet: 20mm³ Hardness: +10 points max. Dry: 150mm³ Tensile: -25% max. Elongation: -25% max. 70 hrs. @ 70°C Changed Wet: 20mm³ Hardness: +10 points max. Dry: 150mm³ Tensile: -25% max. Elongation: -25% max. 70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 160mm³ Tensile: -25% max Elongation: -25% max.
MULLEN BURST 1PLY PSI
Page 8 of 10 // 7069-E (24/11/2015)
-20° to 180°F (-29° to 82°C)
70 hrs. @ 70°C Changed Hardness: +/-15 pnts max. Tensile: +/-30% max. Elongation: -50% max.
-20° to 180°F (-29° to 82°C)
-20° to 180°F (-29° to 82°C)
TEMPERATURE RANGE
-20° to 180°F (-29° to 82°C)
OIL RESISTANCE (OIL NO3)
70 hrs @ 70°C Changed Wet: 40mm³ Hardness: ±15 points max. Dry: 160mm³ Tensile: ±30% max Elongation: -50% max.
70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 225mm³ Tensile: -25% max Elongation: -25% max. 70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 225mm³ Tensile: -25% max Elongation: -25% max.
DIN ABRASION
75
65
60
50
TG-65 TRANSEAL
AB-168
AB-258
40
40
40
AB-576 (NSF/ ANSI 61)
A+
SKIRT-SHIELD
AB-140 SKIRTSHIELD
A+
DURASHIELD
HARDNESS (SHORE A)
2250 min.
2250 min.
2400
400 min.
450 min.
500
250 min.
600 min.
3300 nom.
1500 min.
600 min.
600 min.
225 nom.
350 nom.
225 nom.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN.
3300 nom.
3300 nom.
TENSILE PSI
appendix 4
70 hrs. @ 100°C Changed Hardness: +15 points Tensile: -15% max. Elongation: -40% max.
168 hrs. @ 70°C Changed Hardness: +10 points max. Tensile: -25% max. Elongation: -25% max..
MULLEN BURST 1PLY PSI
Page 9 of 10 // 7069-E (24/11/2015)
-20° to 200°F (-29° to 93°C)
-40° to 275°F (-40°to 135°C)
70 hrs @ 100°C Changed Hardness: +15 points max. Tensile: +/-30% max Elongation: -50% max. 3 weeks @ 120°C Changed Hardness: 18 points Tensile: 2% Elongation: -66% (all values nom.)
-20° to 180°F (-29° to 82°C)
70 hrs. @ 70°C Changed Wet: 12mm³ Hardness: +10 points max. Dry: 120mm³ Tensile: -25% max Elongation: -25% max.
4 weeks @ 125°C Voltesso 35 Oil Changed Hardness: 3 points Tensile: -60% Elongation: -78% Mass: 10% Volume: 12% (all values nom.)
-20° to 180°F (-29° to 82°C)
TEMPERATURE RANGE
70 hrs @ 70°C Changed Wet: 40mm³ Hardness: +10 points max. Dry: 160mm³ Tensile: -25% max Elongation: -25% max.
OIL RESISTANCE (OIL NO3)
-20° to 180°F (-29° to 82°C)
HEAT AGING
70 hrs. @ 70°C Changed Wet: 12mm³ Hardness: +10 points max. Dry: 120mm³ Tensile: -25% max Elongation: -25% max.
DIN ABRASION
60
70
50
50
65
65
60
AB-268
AB-278
MILPRF-1149 type 1, class 1
MILPRF-1149 type 1, class 2
MILPRF-1149 type 2, class 1
MILPRF-1149 type 2, class 2
MIL-6855 class 2, grade 60
HARDNESS (SHORE A)
2500 min.
1000 min.
1000 min.
1000 min.
1000 min.
2250 min.
2250 min.
TENSILE PSI
appendix 4
350 min.
250 min.
250 min.
300 min.
300 min.
300 min.
350 min.
ULTIMATE TEAR ELONGATION RESISTANCE % LBS/IN. DIN ABRASION
70 hrs @ 100°C Changed Hardness: +15 points max. Tensile: -15% max Elongation: -15% max.
94 hrs @ 70°C Changed Hardness: 10 points max. Tensile: -20% max Elongation: -35% max.
94 hrs @ 70°C Changed Hardness: 10 points max. Tensile: -20% max Elongation: -35% max.
94 hrs @ 70°C Changed Hardness: 10 points max. Tensile: -20% max Elongation: -35% max.
94 hrs @ 70°C Changed Hardness: 10 points max. Tensile: -20% max Elongation: -35% max.
70 hrs. @ 100°C Changed Hardness: +15 points Tensile: -15% max. Elongation: -40% max.
70 hrs. @ 100°C Changed Hardness: +15 points Tensile: -15% max. Elongation: -40% max.
HEAT AGING
70 hrs. @ 100°C Changed Hardness: +30 points max. Tensile: -50% max. Elongation: -40% max Volume: ±10% max
TEMPERATURE RANGE
MULLEN BURST 1PLY PSI
Page 10 of 10 // 7069-E (24/11/2015)
70 hrs @ 100°C Volume changed: 120% max.
70 hrs @ 100°C Volume changed: 120% max.
OIL RESISTANCE (OIL NO3)
appendix 5 RUBBER SHELF LIFE
*When stored in original packaging as per RMA Guidelines
ABREVIATIONS STORAGE LIFE TYPE OF RUBBER
ASTM D-1418
ASTM D-2000
Silicone
Q
FE
(20 years)
Viton
FKM
HK
(5 to 20 years)
Hypalon
CSM
CE
(5 to 10 years)
Butyl
IIR
AA,BA
(5 to 10 years)
Neoprene
CR
BC, BE
(5 to 10 years)
EPDM
EPDM
BA, CA
(5 to 10 years)
Nitrile
NBR
BF, BG, CH
(3 to 5 years)
Styrene Butadiene
SBR
AA, BA
(3 to 5 years)
Natural
NR
AA
(3 to 5 years)
Synthetic Natural
IR
AA
(3 to 5 years)
«Rubber products in storage can be adversely affected by the following: temperature, humidity, ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects and rodents and radiation.when such containers are wooden crates or cardboard cartons, since this will provide protection against the deteriorating effects of oils, solvents, and corrosive liquids and will also afford some protection against ozone and sunlight. Since certain rodents and insects thrive on rubber products, adequate protection should be provided against them.» The warehousing area should be relatively cool, dark, and free from dampness and mildew. All rubber products should be used on a first-in, first-out basis since even under these conditions an unusual length of time in storage can result in the deterioration of certain products. The ideal storage temperature for rubber products is 50 to 70oF (10 to 21oC) with a maximum limit of 100oF (38oC). If stored below 32oF (0oC), some products may become stiff and should be warmed before being placed in service. Rubber products should not be stored near sources of heat, such as radiators and base heaters.
Rubber products should not be stored under conditions of high or low humidity. To protect against the adverse effects of ozone, rubber products should not be stored near electrical equipment that may generate ozone and should not be stored for any lengthy period in geographical areas of known high ozone concentrations. Exposure to direct and reflected sunlight should also be avoided. Whenever feasible, rubber products should be stored in their original shipping containers, especially when such containers are wooden crates or cardboard cartons, since this will provide protection against the deteriorating effects of oils, solvents, and corrosive liquids and will also afford some protection against ozone and sunlight. Since certain rodents and insects thrive on rubber products, adequate protection should be provided against them.»
7069-E (21-04-2011)
CANADIAN SALES REPRESENTATIVES
-
-
ARIZONA
ARKANSAS
-
-
-
-
CONNECTICUT
DELAWARE
DC
North (Including Monterey, Kings and Inyo.)
COLORADO
CALIFORNIA (WAREHOUSE IN SANTA FE)
-
ALASKA WRC Marketing
D & D Sales Associates
Mahony Associates
Mahony Associates
Mahony Associates
AM Carlson Sales Co.
Industrial Solutions
David Mahony
David Mahony
David Mahony
Terry Carlson
Gary Rooker
David Scott
Ray Cooper
David Scott
-
TJ Wootton
Flexible Industrial Solutions -
REP
AGENT
South (Kern cty, San Bernardino and Santa D & D Sales Associates Barbara cty to Mexican border)
-
REGION
ALABAMA
STATE
CUSTOMER SERVICE.................1 888 275-7075
215 499-8940
215 499-8940
215 499-8940
801 557-7824
530 320-5001
1 800 500-4222
281 320-9169
1 800 500-4222
819 679-1494
678 522-7510
PHONE
djmahony@aol.com
djmahony@aol.com
djmahony@aol.com
terrycarlson@me.com
grooker@industrialsolutionsinc.net
descott@earthlink.net
wrcmkt@aol.com
descott10@earthlink.net
-
tjwootton@comcast.net
7069-E (15-05-2014)
Glenn Orn
Glenn Orn
Glenn Orn
Paul Smith
Paul Smith
Paul Smith
Paul Smith
Paul Smith
Frederic Guerin
Glenn Orn
REGIONAL MANAGER
Frederic Guerin................................819 679-1494 Ward Willaimson (MANAGER)................................................................ 416 605-4617 Glenn D. Orn....................................774 329-0571 (Ontario, Alberta (Ontario and Western Canada (Warehouse in Edmonton)) (Saskatchewan, Manitoba, British Columbia) Paul Smith........................................319 431-8828 Pierre Bineau......................................................................................... 819 571-1238 Ward Willamson...............................416 605-4617 (Quebec, PEI, New Brunswick, Nova Scotia, Newfoundland)
U.S. REGIONAL MANAGERS
CONTACTS
appendix 6
Rich Stockglausner
Richard F. Payne Midwest Industrial Sales
Except East St-Louis area
East St-Louis area
Whitmore Sales Smith Industrial Group
-
-
-
-
Upper peninsula
-
LOUISIANA
MAINE
MARYLAND
MASSACHUSSETTS
-
-
MINNESOTA
MISSISSIPPI
MICHIGAN
Mahony Associates
-
KENTUCKY
TJ Wootton
Flexible Industrial Solutions
678 522-7510
612 220-4316 952 237-9268 801 580-9890
Kyle Whitmore Scott Whitmore Tim Whit more
Whitmore Sales
952 237-9268
215 499-8940
215 499-8940
215 499-8940
281 320-9169
440 539-6022
313 938-5270
Scott Whitmore
David Mahony
David Mahony
David Mahony
Ray Cooper
Dave Rowland
314 378-1176
1-800-662-5571
440 221-3248
314 378-1176
1-800 662-5571
503 825-1888
819 679-1494
678 522-7510 336 327-3900
336 327-3900
678 522-7510
PHONE
Doug Poropat
Mahony Associates
Mahony Associates
WRC Marketing
Smith Industrial Group
Rich Stockglausner
Midwest Industrial Sales
-
KANSAS
-
Brian Parkison
Mike Morgan
Richard F. Payne
-
IOWA
Smith Industrial Group
-
INDIANA
ILLINOIS (WAREHOUSE IN FRANKLIN PARK)
Morgan Associates
-
-
IDAHO
-
-
TJ Wootton Tom Martin
Tom Martin
TJ Wootton
REP
HAWAII
Flexible Industrial Solutions
Flexible Industrial Solutions
AGENT
-
West
East
REGION
GEORGIA (WAREHOUSE IN ATLANTA)
FLORIDA
STATE
appendix 6
tjwootton@comcast.net
kyle.whitmoresales@integra.net scott.whitmoresales@intergra.net whitmoresales@integra.net
doug@smithindustrialgroup.com
Scott.whitmoresales@integra.net
djmahony@aol.com
djmahony@aol.com
djmahony@aol.com
wrcmkt@aol.com
dave@smithindustrialgroup.com
Rstock22@aol.com
payneinc@rfpayne.com
brian@smithindustrialgroup.com
Rstock22@aol.com
payneinc@rfpayne.com
morgansales@comcast.net
-
tjwootton@comcast.net tmmiv@atmc.net
tmmiv@atmc.net
tjwootton@comcast.net
7069-E (15-05-2014)
Glenn Orn
Glenn Orn
Ward Williamson
Glenn Orn
Glenn Orn
Glenn Orn
Glenn Orn
Paul Smith
Ward Williamson
Glenn Orn
Paul Smith
Ward Williamson
Glenn Orn
Paul Smith
Paul Smith
Frederic Guerin
Glenn Orn
Glenn Orn
Glenn Orn
REGIONAL MANAGER
Mahony Associates
City
Mahony Associates
West
East
PUERTO RICO
-
Smith Industrial Group
-
OREGON
PENNSYLVANIA
Morgan Associates
-
OKLAHOMA
-
WRC Marketing
Smith Industrial Group
-
-
David Mahony
Michael Smith
Mike Morgan
Ray Cooper
819 679-1494
215 499-8940
440 539-0522
503 825-1888
281 320-9169
216 533-1760 440-539.9776 440 539-5819 440 539-0522 440 539-6022
OHIO (WAREHOUSE IN TWINSBURG)
Charlie Smith Doug Poropat Tom Smith Michael Smith Dave Rowland
Whitmore Sales
-
NORTH DAKOTA
336 327-3900 952 237-9268
Tom Martin
Flexible Industrial Solutions
NORTH CAROLINA
801 557-7824
215 499-8940
216 533-1760
215 499-8940
215 499-8940
530 320-5001
562 201-3964
1-800-662-5571
360 714-0379
314 378-1176
PHONE
Scott Whitmore
Terry Carlson
David Mahony
Charlie Smith
David Mahony
David Mahony
Gary Rooker
David Scott
-
Rich Morgan
AM Carlson Sales Co.
NEW MEXICO
-
Smith Industrial Group
Upstate
NEW YORK
Mahony Associates
-
NEW JERSEY
Mahony Associates
-
Industrial Solutions
NEW HAMPSHIRE
Except Clark Countries
D & D Sales Associates
South (Including Las Vegas and Henderson)
NEVADA
Richard F. Payne
-
NEBRASKA
Morgan Associates
-
Rich Stockglausner
Midwest Industrial Sales
MONTANA
REP
AGENT
-
REGION
MISSOURI
STATE
appendix 6
-
djmahony@aol.com
michael@smithindustrialgroup.com
morgansales@comcast.net
wrcmkt@aol.com
charlie@smithindustrialgroup.com doug@smithindustrialgroup.com tom@smithindustrialgroup.com michael@smithindustrialgroup.com dave@smithindustrialgroup.com
scott.whitmoresales@integra.net
tmmiv@atmc.net
terrycarlson@me.com
djmahony@aol.com
charlie@smithindustrialgroup.com
djmahony@aol.com
djmahony@aol.com
grooker@industrialsolutionsinc.net
descott10@earthlink.net
payneinc@rfpayne.com
richmorganjr@comcast.net
Rstock22@aol.com
7069-E (15-05-2014)
Frederic Guerin
Glenn Orn
Ward Williamson
Paul Smith
Paul Smith
Ward Williamson
Glenn Orn
Glenn Orn
Paul Smith
Glenn Orn
Ward Williamson
Glenn Orn
Glenn Orn
Paul Smith
Paul Smith
Paul Smith
Paul Smith
Glenn Orn
REGIONAL MANAGER
-
-
-
-
-
-
-
-
-
-
-
-
SOUTH CAROLINA
SOUTH DAKOTA
TENNESSEE
TEXAS (WAREHOUSE IN HOUSTON)
UTAH
VERMONT
VIRGINIA
WEST VIRGINIA
WASHINGTON (WAREHOUSE IN VANCOUVER)
WISCONSIN
WYOMING
REGION
RHODE ISLAND
STATE
appendix 6
AM Carlson Sales Co.
Richard F. Payne
Morgan Associates
Fred Carlson
-
Rich Morgan
Michael Smith
Tom Martin
Flexible Industrial Solutions Smith Industrial Group
David Mahony
801 583-3996
1-800-662-5571
360 714-0379
440 539-0522
336 327-3900
215 499-8940
801 557-7824 801 580-9890
Terry Carlson Fred Carlson
Mahony Associates
AM Carlson Sales Co.
281 320-9169
678 522-7510
612 220-4316
336 327-3900
215 499-8940
PHONE
Ray Cooper
TJ Wootton
Flexible Industrial Solutions WRC Marketing
Kyle Whitmore
Tom Martin
Flexible Industrial Solutions Whitmore Sales
David Mahony
REP
Mahony Associates
AGENT
fcarlson@comcast.net
payneinc@rfpayne.com
richmorganjr@comcast.net
michael@smithindustrialgroup.com
tmmiv@atmc.net
djmahony@aol.com
terrycarlson@me.com fcarlson@comcast.net
wrcmkt@aol.com
tjwootton@comcast.net
kyle.whitmoresales@integra.net
tmmiv@atmc.net
djmahony@aol.com
7069-E (15-05-2014)
Paul Smith
Paul Smith
Paul Smith
Ward Williamson
Glenn Orn
Glenn Orn
Paul Smith
Paul Smith
Glenn Orn
Glenn Orn
Glenn Orn
Glenn Orn
REGIONAL MANAGER
Murdock Industrial is a full line distributor representing the best in manufacture and design. Our goal is to provide quick access to knowledge, products and services.
www.TheCatalogRoom.com provides instant access to current PDF catalogs as well as the ability to purchase printed catalogs for your library.
The Projector Room www.TheProjectorRoom.com houses on demand instructional videos from the manufacturers we distribute for as well as self produced training videos.
www.MurdockIndustrial.com Phone: 330-535-7105 Fax: 330-535-1125 Support@MurdockIndustrial.com