MATERIAL SAFETY DATA SHEET Eaton | Aeroquip Hose Assembly Lubricant SECTION I: PRODUCT IDENTIFICATION Product name or number: Reference numbers NSN# Emergency telephone number: Manufacturer’s name: Distribution through: Address: Manufacturer’s DUNS number: Hazardous material description (49 CFR 172.101):
Hose Assembly Lube 222070, FBM3553, FCM3553, M/00102-0151 915000N024686 419-832-0235 Paramount Products Murdock Industrial Inc. / www.EatonProducts.com 553 Carroll St Akron, OH 44304 USA 60-687-0947 None HMIS Health Fire Reactivity Contact
Additional hazard classes (as applicable): Chemical family: Formula:
None N/A Blend
SECTION II: INGREDIENTS CAS registry number
% weight
Chemical name(s)
Exposure limit
64742-65-0 9003-29-6
80% 20%
HSR PARAFFINIC OIL VI IMPROVER
5mg/m3 none
SECTION III: PHYSICAL PROPERTIES Pale Amber, viscous oil. SECTION IV: FIRE AND EXPLOSION HAZARD DATA Flash point: Method used: Flammable limits: Extinguishing media: Special fire fighting procedures:
Unusual fire and explosion hazards:
400° F COC LEL: N/A UEL: N/A Fog, foam, and CO2 Use water fog. Do not use direct stream water DO not enter confined fire space without proper protective equipment. This may include self-contained breathing apparatus to protect against the hazardous effect of combustion products and oxygen deficiencies. Cool fire exposed containers with water. None
1 1 0 B
SECTION V: HEALTH HAZARD DATA Effects of overexposure/conditions to avoid: Threshold limit value: Permissible exposure limit: Primary routes of entry:
Prolonged contact with the concentrate may cause skin and eye irritation N/A N/A Skin and eyes
Emergency and first aid procedures Eyes: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Skin: Flush with water for 15 minutes. If irritation persists, seek medical assistance. Ingestion: Do not induce vomiting. Give large amounts of water or milk if available and seek medical assistance. SECTION VI: REACTIVITY DATA Conditions to avoid: Stability: Incompatibility (materials to avoid): Hazardous decomposition products: Hazards: Conditions to avoid: Polymerization:
None Stable Strong oxidizing agents CO, CO2, oxides of nitrogen and sulfur None known None known Will not occur
SECTION V11: SPILL OR LEAK PROCEDURES Steps to be taken in case material spills or leaks:
Waste disposal method: CERCLA reportable quantity (in pounds) RCRA hazardous waste number: Volatile organic compound: Weight per gallon:
Dike spill area with absorbent material. Pump liquid into approved container. Clean up residue with absorbent material and water. CAUTION: SLIP HAZARD. According to federal, state, and local regulations. N/A N/A None Analytical pounds
SECTION VIII: SPECIAL PROTECTION INFORMATION Respiratory protection: Ventilation: Special: Other: Protective gloves: Eye protection: Other protective equipment:
No special requirements with adequate ventilation N/A N/A N/A Rubber Safety goggles As requested by operators
SECTION IX: SPECIAL PRECAUTIONS Storing and handling: Other precautions:
Keep container closed when not in use. Do not reuse empty container. Do not pressurize container.
5/3/2010 Page 2 of 2