Saint Gobain Tygon Complete Catalog by Murdock Industrial

Tygon Catalog Collection Compiled by: Murdock Industrial Inc sales@MurdockIndustrial.com

Please visit www.eMurdock.com to order.

www.eMurdock.com

www.TheCatalogRoom.com

Declaration of compliance for materials made from plastic intended to come into contact with food

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, Ohio 44305 USA Date of the declaration: November 19th, 2012

Validity: until revocation and renewal Hereby we declare that the following products: Trade name Material type (polymer) 3 Tygon® S B-44-3 polyvinyl chloride Tygon® S 3 B-44-4X 3 Tygon® S E-3603 Tygon® S 3 E-LFL comply with the legal regulations laid down in the Regulation (EU) No 10/2011 as well as in Regulation (EC) No 1935/2004, both as amended. The materials and raw materials used comply with Regulation (EU) No 10/2011. When used as specified, the overall migration as well as the specific migrations do not exceed the legal limits. The tests have been performed according to Article 17 and 18 of Regulation (EU) No 10/2011 in conjunction with Annex V. The following substances subject to restrictions and/or specifications are used in the abovementioned product: Name of substance Proprietary substance 1 Proprietary substance 2 Proprietary substance 3 Proprietary substance 4

Restriction Restrictions stated in Annex I of Regulation (EU) No 10/2011 Restrictions stated in Annex I of Regulation (EU) No 10/2011 Restrictions stated in Annex I of Regulation (EU) No 10/2011 Restrictions stated in Annex II of Regulation (EU) No 10/2011

Upon request, Saint-Gobain may disclose proprietary substances to a 3rd party lab to verify testing compliance.

Saint-Gobain Performance Plastics 2664 Gilchrist Road • Akron, OH 44305 • Tel: (330) 798-9240 • Fax: (330) 798-6968 • www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

Information on dual use substances: no dual substances are used. Specification of the intended use and restrictions: - Type(s) of food intended to come into contact with the above mentioned products: ANNEX III Table 2

Reference Number 01.01 A

01.02

03.02 B II 03.03 B

04.02 B

04.05 B 04.05 C

06.01 B II 06.02 B II

08.01

Food Type Clear Drinks: Water, ciders, clear fruit or vegetable juices of normal strength or concentrated, fruit nectars, lemonades, syrups, bitters, infusions, coffee, tea, beers, soft drinks, energy drinks and the like, flavoured water, liquid coffee extract Alcoholic beverages of an alcoholic strength of between 6 %vol and 20 %. Moist confectionary products in paste form Sugar and Sugar products: molasses, sugar syrups, honey, and the like Processed Fruit: Fruit in the form of purée, preserves, pastes or in its own juice or in sugar syrup (jams, compote, and similar products) Processed Vegetables: Fresh Vegetables Peeled or cut Processed Vegetables: Vegetables in the form of purée, preserves, pastes or in its own juice (including pickled and in brine) Preserved fish in an aqueous medium crustaceans and mollusks (incl oysters, mussels, snails): shell removed, processed, preserved or cooked with shell: in an aqueous medium Vinegar

Saint-Gobain Performance Plastics 2664 Gilchrist Road • Akron, OH 44305 • Tel: (330) 798-9240 • Fax: (330) 798-6968 • www.tygon.com

www.eMurdock.com

08.03 B II

08.04 B 8.07

www.TheCatalogRoom.com

Preparations for soups, broths, sauces, in liquid, solid or powder form (extracts, concentrates); homogenised composite food preparations, prepared dishes including yeast and raising agents: any other form than powdered or dried: not with fatty character Sauces with aqueous character Ice Creams

- Conditions of use including duration and temperature of treatment or storage while in contact with the food: 2 hours, at 70°C. - Products specified are approved for repeat-use conditions.

A functional barrier made from plastic is not used in the above mentioned products. Geometry restrictions for use: • 1/16 inch (1.59mm) minimum inner diameter for Tygon® S3 B-44-4X and Tygon® S3 B-44-3. •

1/8 inch (3.18 mm) minimum inner diameter for Tygon® S3 E-LFL and Tygon® S3 E-3603.

This declaration is valid for the products as described and delivered by us. The verification of compliance was performed based on the rules set out in Regulation (EU) No 10/2011; according to which the product complies with the legal requirements subject to adherence to the stated conditions for the contact with food. In case of deviating food contact conditions, it is up to the user to verify the suitability.

Jennifer Casacchia Quality Assurance Manager Saint-Gobain PPL – Akron, Ohio Facility November 19, 2012 _______________________________________________________________ Place/date/signature

Saint-Gobain Performance Plastics 2664 Gilchrist Road • Akron, OH 44305 • Tel: (330) 798-9240 • Fax: (330) 798-6968 • www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

CHEMFLUOR® CONVOFLEX™ TUBING Designed for Use with Flare Grip® Fittings Features/Benefits • Flexible convoluted construction • Available in FDA-approved Teflon® FEP and PFA as well as most other fluoropolymers • Easily cold flared for use with Chemfluor® Flare Grip® tube fittings • Read-through transparency • Virtually unlimited length capability • Continuous flow path — self-flushing • Excellent as chemically resistant wire conduit Chemfluor® ConvoFlex™ (Convoluted Flexible) Tubing is specifically designed to be used with the Chemfluor® line of Flare Grip® molded PFA flare fittings. There’s no need for expensive straight cuffs — ConvoFlex is easily cold flared with our FastFLARE™ cold forming tools. ConvoFlex™ tubing resists chemicals and elevated temperatures. It is made from FDA-approved Teflon® FEP, offers read-through transparency, and features a spiral design that aids in self-flushing and cleaning. This tubing is used in the biotech, pharmaceutical, aerospace, semiconductor and chemical processing industries. ConvoFlex tubing’s outstanding flexibility, high dielectric strength and superior chemical resistance also make it an excellent choice for wire conduit.

Typical Applications • Biotech • Pharmaceutical • Aerospace • Semiconductor • Chemical processing

www.eMurdock.com

www.TheCatalogRoom.com

Chemfluor® ConvoFlex™ Tubing — Specifications A I.D.

B O.D.

Wall Thickness (Nominal)

Room Temp. Burst Pressure1

Bend Radius

Cv2

1/4"

3/8"

.020"

100

1/2"

0.31

3/8

1/2

.023

3/4

0.83

1/2

5/8

.025

1.64

Note:

5/8

3/4

.025

1-1/2

2.78

3/4

7/8

.025

4.56

7/8

.025

2-1/2

8.20

1 Each individual application should be evaluated to determine the degree of safety factor to be used with these values. 2 Based on a long radius sweep.

Diameters up to 4" are available on a custom run basis.

ConvoFlex™ tubing can also be made from a wide range of materials including, but not limited to PFA or FEP, PVDF, Tefzel® and Halar®.

Distributed By:

CHEMFLUOR® and Flare Grip® are a registered trademark of Saint-Gobain Performance Plastics. ConvoFlex™ is a trademark of Saint-Gobain Performance Plastics. FastFLARE™ is a trademark of PlastiTECH. Halar® is a registered trademark of Ausimont. Teflon® and Tefzel® are registered trademarks of DuPont.

Saint-Gobain Performance Plastics I-295 and Harmony Road • Mickleton, NJ 08056 Tel: (856) 423-6630 • Toll Free: (800) 543-8823 Fax: (856) 423-8182 2664 Gilchrist Road • Akron, OH 44305 Tel: (330) 798-9240 • Toll Free: (800) 798-1554 Fax: (330) 798-6968 www.bunnell-plastics.c0m Limited Warranty: For a period of 12 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product(s) to be free from defects in manufacturing. Our only obligation will be to provide replacement product for any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risks, if any, including the risk of injury, loss or damage, whether direct or consequential, arising out of the use, misuse, or inability to use this product(s). SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation. FLS-3210-2.5M-0105-SGCS

www.bunnell-plastics.com

www.eMurdock.com

www.TheCatalogRoom.com

Furon 400 Series High Purity PFA Tubing ®

Features / Benefits • Non-destructive/non-contaminating laser scribing for positive identification of size, material and 100% lot traceability • Custom laser scribing available (for identifying chemicals/process media, tool number, OEM’s name/private label, etc.) • 100% virgin high purity PFA resin • Manufactured using ISO 9000 guidelines (standard 4.8—product identification and traceability) • Heat stabilized during extrusion for broadest service temperature range • Tube ends capped to prevent I.D. contamination • ”Clean-Pak” packaging available • FDA approved fluoropolymers

Description

Applications

Furon 400 Series High Purity Tubing is specifically designed to be used with the Furon line of Flare Grip™ II, Flare Grip™, Flare Fittings, Fast FLARE™ cold forming tools and GrabSeal™ Tube Compression Fittings.

Tubing is the tubing to specify when the reliability and dependability of an application requires the ultimate in traceability, purity, and chemical resistance.

Furon 400 Series High Purity Tubing features a superior smooth surface inner bore which provides excellent non-wetability, batch-to-batch clean-out, and purging.

Manufactured from FDA approved fluoropolymers, this tubing is ideal for use in the Semiconductor, Biotech, Pharmaceutical, Food and Beverage, and Chemical Process industries. 400 Series tubing is now available on white plastic reels

www.eMurdock.com

www.TheCatalogRoom.com

Furon® 400 Series High Purity PFA Tubing 400 Series “PFA” Tubing: A High Purity all-virgin thermoplastic non-porous tubing with the ability to withstand from a low cryogenic temperature to a +450°F (232°C) temperature range. Heavy wall is available for additional strength and a long mechanical life. O.D. 1 ⁄8 " 1 ⁄4 1 ⁄4 1 ⁄4

TOLERANCE ±.005 ±.005 ±.005 ±.005 ±.006 ±.006 ±.006 ±.006 ±.008 ±.008 ±.008 ±.008

⁄8 ⁄8 1 ⁄2 1 ⁄2 3 3

⁄4 ⁄4 1

11⁄4**

I.D. ⁄16 "

WALL THICKNESS .030 .030 .047 .060 .030 .060 .030 .060 .030 .060 .060 .060

⁄16 ⁄32 1 ⁄8 5 ⁄16 3 5

⁄4

⁄16 3 ⁄8 11 ⁄16 5 ⁄8 7 ⁄8 11⁄8 7

PART NO.* TSFP5.125063.HP TSFP5.250187.HP TSFP5.250156.HP TSFP5.250125.HP TSFP5.375312.HP TSFP5.375250.HP TSFP5.500437.HP TSFP5.500375.HP TSFP5.750687.HP TSFP5.750625.HP TSFP5.100875.HP TSFP5.105457.HP

* Ordering Information: Order by Part Number. Custom lengths, special sizes, standard Put-Ups’s, clean-pak and cleanroom compatible plastic reels are available upon request. **Consult factory on availability and specification on 1-1/4” O.D. Tubing. Large diameter tubing is susseptable to kinking. Use generous bend radius when installing.

HIGH PURITY STANDARD PUT UPS PRODUCT CODE SIZE TSFP5.100875.HA 1 x 7⁄8” TSFP5.100875.H5 1 x 7⁄8” 3 TSFP5.100875.H1 ⁄4 x 5⁄8” 3 ⁄4 x 5⁄8” TSFP5.750625.HA 3 TSFP5.750625.H5 ⁄4 x 5⁄8” 1 TSFP5.750625.H1 ⁄2 x 3⁄8” 1 TSFP5.500375.HA ⁄2 x 3⁄8” 1 ⁄2 x 3⁄8” TSFP5.500375.H5 1 TSFP5.500375.H1 ⁄2 x 3⁄8” 3 TSFP5.375250.HA ⁄8 x 1⁄4” 3 ⁄8 x 1⁄4” TSFP5.375250.H5 3 TSFP5.375250.H1 ⁄8 x 1⁄4” 1 TSFP5.250156.HA ⁄4 x 5⁄32” 1 ⁄4 x 5⁄32” TSFP5.250156.H5 1 TSFP5.250156.H1 ⁄4 x 5⁄32”

REEL SIZE (FLANGE DIA. x HUB DIA. x WIDTH) 48” x 36” x 18” 36” x 28” x 121⁄2” 12” x 8” x 51⁄2” 1000 500

DOUBLE

BAGGED 100’ COILS 100

1000 500 100 1000 500 100 1000 500 100 1000 500 100

Specifications

Minimum Bend Radius TUBING O.D. 1

⁄4 ”

⁄2 3 ⁄4 1

.030” Wall Thickness

2” 8 20 36

.060” Wall Thickness

⁄4 ”

2 12 24

Saint-Gobain Performance Plastics I-295 at Harmony Road P.O. Box 71 Mickleton, NJ 08056 Phone: (856) 423-6630 Fax: (856) 423-8182

Grab Seal™ is a trademark. Flare Grip® is a registered trademark. Furon® is a registered trademark.

USA Toll Free: (800) 543-8823 12-month Limited Warranty: For a period of 12 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in manufacturing. This company’s only obligation will be to provide replacement product for any material proven to have such a defect, or at SGPPL’s option, to refund the purchase price thereof. User assumes all other risks, if any, including the risk of injury, loss or damage, whether direct, consequential or incidental, arising out of the use, misuse, or inability to use this product. SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product or of any final product into which the product may be incorporated by the purchaser and/or user. ENC 2089 2.5M 0604 STAS

www.microelectronics.saint-gobain.com

Norprene® A-60-N Drinking Water Tubing | Saint-Gobain Performance Plastics, Process ... Page 1 of 1 www.eMurdock.com www.TheCatalogRoom.com

Home > Products >

Related Links

Tygon® Flexible Tubing

Tygon®

Norprene® A-60-N Tubing

Norprene® Drinking Water Tubing Formulation A-60-N Formulated for use as drinking water tubing.

Specifications Specifications Typical Physical Properties Durometer Hardness, Shore A, 15 sec

ASTM Method

Value or Rating

D2240--00

D412-98

950 (6.6)

Tensile Strength psi (MPa) Ultimate Elongation %

D412-98

420

Tensile Stress @ 100% Elongation, psi (MPa)

D412-98

370 (2.6)

Tear Resistance, lb-f/inch (kN/m)

D1004-94

120 (21)

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs

D395-98 Method B

Brittle Temperature °F (°C)

D746-98

-75 (-60)

Specific Gravity

D792-00

0.98

Water Absorption % 24 hrs @ 73°F (23°C)

D570-98

0.30

Maximum Recommended Operating Temp °F (°C)

275 (135)

Color

Tan

Unless otherwise noted, all tests were conducted at room temperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

Other Saint-Gobain Web Sites | Contact Us | Legal | Site Map

http://www.processsystems.saint-gobain.com/product_detail.aspx?id=256652&printer=1

12/13/2012

www.eMurdock.com

www.TheCatalogRoom.com

NORPRENE® Food Process Tubing FORMULATION A-60-F For critical processing applications in the food, dairy and cosmetic industries Features/Benefits Formulated for flexural resistance and high temperatures, Norprene® Food Process Tubing does not easily crack or deteriorate, even in physically demanding applications.

Versatile Norprene® Food Process Tubing Provides Long Life for Everyday Use Norprene® Food Process Tubing consistently outperforms general purpose rubber tubing in a wide variety of applications. It will not weaken or crack following years of exposure to heat and ozone. Norprene® Food Process Tubing is extremely abrasion resistant and bends easily to simplify custom component assembly.

Simplifies Cleaning and Sterilization Norprene® Food Process Tubing is ideal for use in clean-in-place and steam-in-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times without affecting its overall service life. Norprene® Food Process Tubing fully complies with FDA 21 CFR, 177.2600 criteria, 3-A Sanitary Standards and NSF Standard 51, which are applicable in many food contact applications.

Now Available to Withstand Elevated Pressure Certain applications require using pressures that only reinforced tubing can withstand. For those applications, Norprene® Pressure Tubing is now available. It has the same desirable properties as Norprene® Food Process Tubing with an additional reinforcement embedded within its walls to withstand elevated pressure. (Refer to the Saint-Gobain Performance Plastics data page on Norprene® Pressure Tubing for complete details.)

Excellent Chemical Resistance Norprene® Food Process Tubing provides superior resistance to many corrosive fluids when compared to general purpose rubber tubings. It has excellent acid and alkali resistance and is compatible with numerous oxidizing agents such as peroxide, hypochlorite and ozone. Norprene® Food Process Tubing also shows good resistance to the animal and vegetable oils frequently found in food contact applications. Refer to the comprehensive Tygon® Tubing catalog for a complete listing of common chemicals and their relative affect on Norprene® Food Process Tubing.

•

Long flex life in peristaltic pumps

•

Temperature resistant from -75°F to 275°F

•

Compatible with virtually all common sanitizers and cleaners

•

Ozone and UV light resistant

•

Repeatedly autoclavable

•

Chemically compatible with a wide range of fluids

•

Meets FDA, 3-A and NSF criteria

Typical Applications •

Cosmetic production

•

Food and dairy processing

•

Hot beverage dispensing

•

Water purification lines

•

Sanitizer delivery

•

Soap dispensing

•

Pesticide/fertilizer delivery

•

Ink and toner feed lines

•

Chemical transfer

www.eMurdock.com

www.TheCatalogRoom.com

Norprene® A-60-F Manufactured Sizes and Pressures Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Length (feet)

Minimum Bend Radius (inches)

Max. Working Pressure at 73°F 180°F (psi)* (psi)*

Vacuum Rating In. of Mercury at 73°F 180°F

AAL00003

1/16

3/16

1/16

1/4

29.9

AAL00007

1/8

1/4

1/16

1/2

29.9

AAL00012

3/16

5/16

1/16

3/4

29.9

23.0

AAL00017

1/4

3/8

1/16

1-1/4

26.0

13.0

AAL00019

1/4

1/2

1/8

3/4

19**

12**

29.9

AAL00022

5/16

7/16

1/16

1-1/2

17.0

8.0

AAL00027

3/8

1/2

1/16

2-1/4

11.0

5.0

AAL00029

3/8

5/8

1/8

1-1/4

13**

8**

29.9

23.0

AAL00038

1/2

3/4

1/8

10**

6**

26.0

13.0

AAL00046

5/8

7/8

1/8

3-1/4

8**

5**

17.0

8.0

AAL00053

3/4

1/8

7**

4**

11.0

5.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. **Available in a reinforced construction for higher pressures. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Norprene® A-60-F Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec

ASTM Method

Value or Rating

D2240-03

—

Cream

Tensile Strength psi (MPa)

D412-98

1,000 (6.9)

Ultimate Elongation, %

D412-98

375

Tear Resistance lb-f/inch (kN/m)

D1004-03

120 (21)

Specific Gravity

D792-00

0.98

Water Absorption, % 24 hrs. @ 23°C

D570-98

0.30

D395-03 Method B

D746-98

-75 (-60)

—

275 (135)

Dielectric Strength, v/mil (kV/mm)

D149-97

535 (21.1)

Tensile Modulus, @ 100% Elongation, psi (MPa) @ 300% Elongation, psi (MPa)

D412-98

Tensile Set, %

D412-98

Color

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. Brittleness By Impact Temp., °F (°C) Maximum Recommended Operating Temp., °F (°C)

410 (2.8) 800 (5.5) 47

NORPRENE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL Norprene® is a registered trademark.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968 www.tygon.com IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. FLS-3268-2.5M-0806-SGCS

www.eMurdock.com

www.TheCatalogRoom.com

NORPRENE® Pressure Tubing FORMULATION A-60-F I.B. Provides long service life even when exposed to heat, abrasion and pressure Features/Benefits Norprene® Pressure Tubing is ideally suited for applications that require an approved food contact surface.

Versatile Norprene® Tubing Provides Long Life for Everyday Use Norprene® Pressure Tubing consistently outperforms general purpose rubber tubing in a wide variety of applications. It has excellent resistance to ozone and UV light, with little to no sign of deterioration in laboratory testing to the equivalent of 10 years outdoor exposure. Norprene® Pressure Tubing is extremely abrasion resistant and bends easily to simplify custom component assembly.

• Handles at least 4 times the pressure of non-reinforced tubing • Temperature resistant from -75˚F to 275˚F • Ozone and UV light resistant • Repeatedly autoclavable • Compatible with a wide range of fluids • Meets FDA and 3-A criteria

Typical Applications

Simplifies Cleaning and Sterilization Norprene® Pressure Tubing is ideal for use in clean-in-place and steamin-place cleaning and sterilization systems. It is compatible with virtually all commercial cleaners and sanitizers and can be repeatedly autoclaved for up to five cycle times without affecting its overall service life. Norprene® Pressure Tubing fully complies with FDA 21 CFR, 177.2600 criteria and 3-A Sanitary Standards.

Excellent Chemical Resistance Norprene® Pressure Tubing provides superior resistance to many corrosive fluids when compared to general purpose rubber tubings. Norprene® Pressure Tubing has excellent acid and alkali resistance and is compatible with numerous oxidizing agents such as hydrogen peroxide, sodium hypochlorite and ozone. It also shows good resistance to the animal and vegetable oils frequently found in food contact applications. Refer to the comprehensive Tygon® Tubing catalog for a complete listing of common chemicals and their relative affect on Norprene® tubing.

• Cosmetic production • Food and dairy processing • Hot beverage dispensing • Water purification lines • Sanitizer delivery • Soap dispensing • Pesticide/fertilizer delivery • Ink and toner feed lines • Chemical transfer

www.eMurdock.com

www.TheCatalogRoom.com

Norprene® A-60-F I B. Manufactured Sizes and Pressures Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Length (feet)

Minimum Bend Radius (inches)

Max. Suggested Working Pressure at 73°F (psi)* 180°F (psi)*

Vacuum Rating, In. of Mercury at 73°F 180°F

APW00019

1/4

1/2

1/8

3/4

125

29.9

APW00029

3/8

5/8

1/8

1-1/4

105

29.9

20.0

APW00038

1/2

3/4

1/8

2-1/4

100

25.0

15.0

APW00046

5/8

7/8

1/8

2-1/2

20.0

10.0

APW00054

3/4

1-1/16

5/32

3-1/4

10.0

5.0

APW00064

1-3/8

3/16

12.0

7.0

*Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599.

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Norprene® A-60-F I B.Typical Physical Properties Property

Durometer Hardness Shore A, 15 Sec

ASTM Method

Value or Rating

D2240-03

—

Cream

Tensile Strength psi (MPa)

D412-98

1000 (6.9)

Ultimate Elongation, %

D412-98

375

Tear Resistance lb-f/inch (kN/m)

D1004-03

120 (21)

Specific Gravity

D792-00

0.98

Water Absorption, % 24 hrs. @ 23° C

D570-98

0.30

Compression Set Constant Deflection, % @158°F (70°C) for 22 hrs.

D395-03 Method B

Brittleness by Impact Temp., °F (°C)

D746-98

-75 (-60)

—

275 (135)

Dielectric Strength v/mil (kV/mm)

D149-97

535 (21.1)

Tensile Modulus, @ 100% psi (MPa) @ 300% psi (MPa)

D412-98

Tensile Set, %

D412-98

Color

Maximum Recommended Operating Temp.,°F (°C)

410 (2.8) 800 (5.5) 57

NORPRENE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Norprene® is a registered trademark.

www.eMurdock.com

www.TheCatalogRoom.com

From the Makers of TYGON®

NORPRENE® Industrial Grade Tubing FORMULATION A-60-G Outlasts and outperforms neoprene, EPDM and other specialty rubber tubings Features/Benefits • Superior Weathering • Abrasion Resistant • Outstanding Flexural Fatigue Resistance For extended service in a wide variety of applications, Norprene® Industrial Grade Tubing outlasts virtually all multi-service rubber tubings.

• Wide Temperature Range (-75˚F to 275˚F)

High Performance Alternative to General Purpose Rubber Tubing

• Low Gas Permeability Versus Rubber Tubing

Norprene® Industrial Grade Tubing outperforms neoprene, EPDM and other generalpurpose tubings in test after test and application after application. It will not weaken or crack after years of exposure to heat and ozone, providing long service in a wide range of applications such as gasketing, abrasion-resistant sleeving and cable insulation. Performance formulated for on-the-job reliability, Norprene® handles temperatures from -75˚F (-60˚C) to 275˚F (135˚C), allowing the use of one material with a broad range of temperatures. It is heat sealable and can be joined without fittings. It also has excellent resistance to inorganic (acids and bases) fluids.

Unequalled Life in Peristaltic Pump Applications Peristaltic pumps are used in a wide range of markets and applications. The universal requirement common to these applications is the ability of the tubing to withstand the constant high flexural fatigue exerted by the pump rollers. Norprene® outlasts and outperforms virtually all other general service tubing in peristaltic pump applications due to its high flexural fatigue strength. (For additional details on peristaltic pump tubings refer to the comprehensive Saint-Gobain Performance Plastics Peristaltic Pump Tubing section at www.tygon.com.)

Ideal for Use in Vacuum Systems Norprene® Industrial Grade Tubing is available in standard vacuum sizes that will withstand a full vacuum (29.9" [759mm] of mercury) at 73˚F (23˚C). Unlike typical rubber vacuum tubing, Norprene® resists the cracking and aging that are frequent causes of vacuum tubing failure.

Available in Food Grade and Reinforced Pressure Formulations The unique properties of Norprene® tubing make it desirable for use in many food processing applications. For these applications, always specify Norprene® Food Process Tubing Formulation A-60-F. Where elevated pressure capabilities are required, Norprene® Pressure Tubing Formulation A-60-F I.B. is available to withstand up to five times the pressure of non-reinforced Norprene® tubing. (Refer to the Saint-Gobain Performance Plastics data page for additional information on these select tubing products.)

• Ozone* and UV Light Resistant

Typical Applications • Soap and Disinfectant Dispensing • Printing Ink Transfer • Caustic Dispensing • Plating and Etching Chemicals • Wastewater Sampling • Glass and Window Wash Systems • Vacuum Pumps • Cable Insulation • Abrasion-Resistant Sleeving

*300pphm

www.eMurdock.com

www.TheCatalogRoom.com

NORPRENE® A-60-G Inventoried Sizes Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

AFL00003

1/16

3/16

AFL00007

1/8

1/4

AFL00008**

1/8

3/8

1/8

AFL00012

3/16

5/16

AFL00013

3/16

3/8

AFL00015**

3/16

9/16

3/16

AFL00017

1/4

3/8

1/16

AFL00018

1/4

7/16

3/32

Length (feet)

Minimum Bend Radius (inches)

Max. Working Pressure (psi)* at 73°F at 180˚F

Vacuum Rating, In. of Mercury at 73°F at 180˚F

1/16

1/4

29.9

1/16

1/2

29.9

1/2

29.9

1/16

3/4

29.9

3/32

1/2

29.9

1/4

29.9

7/8

29.9

15.8

3/4

29.9

AFL00019

1/4

1/2

1/8

3/4

29.9

AFL00020**

1/4

5/8

3/16

1/2

29.9

AFL00022

5/16

7/16

1/16

1-1/4

20.2

10.1

AFL00023

5/16

1/2

3/32

1.0

29.9

25.0

AFL00026**

5/16

13/16

1/4

1/2

29.9

AFL00027

3/8

1/2

1/16

1-3/8

14.1

7.0

AFL00028

3/8

9/16

3/32

1-1/2

29.9

15.0

AFL00029

3/8

5/8

1/8

1-1/8

29.9

27.7

AFL00032

7/16

9/16

1/16

2-1/4

5.0

0.0

AFL00036

1/2

5/8

1/16

3.0

15.0

0.0

AFL00037

1/2

11/16

3/32

2-1/4

20.0

10.0 15.6

AFL00038

1/2

3/4

1/8

1-1/8

29.6

AFL00045

5/8

13/16

3/32

3-1/4

10.0

5.0

AFL00046

5/8

7/8

1/8

2-3/4

20.0

9.9

AFL00053

3/4

1/8

3-1/2

13.9

6.9

AFL00062

1-1/4

1/8

5.0

NORPRENE® A-60-G Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec

ASTM Method

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. **Vacuum Tubing Sizes

HOW NORPRENE® Tubing Compares with Neoprene Tubing Value or Rating

D2240-97

Black

Tensile Strength psi (MPa)

D412-98

1,000 (6.9)

Ultimate Elongation, %

D412-98

375

Tear Resistance lb-f/inch (kN/m)

D1004-94

Specific Gravity Water Absorption, % 24 hrs. @ 23˚C

Color

The following information is based on tests conducted for 28 days at 73˚F, unless otherwise noted. The information is based on reliable test results. Use as a guide only, taking into account such variables as temperature and fluid contamination in your own application. Performance Norprene® Neoprene

Chemical Tested 20% Ammonium Hydroxide

Excellent

10% Sodium Hydroxide

Excellent

Fair

120 (21)

50% Sulfuric Acid

Excellent

D792-98

0.98

90% Sulfuric Acid

Fair

Failed

D570-98

0.30

Methanol

Excellent

37% Hydrochloric Acid

Excellent

Fair

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

D395-98 Method B

27 Good

Good

Brittleness By Impact Temp., ˚F (˚C)

D746-98

-75 (-60)

50% Ethylene Glycol

Excellent

275 (135)

Water: 28 days @ 220˚F

Excellent

Fair

Good

Failed

Maximum Recommended Operating Temperature*, ˚F (˚C)

Ethanol

Air: 7 days @ 275˚F

Dielectric Strength v/mil (kV/mm)

D149-97

Tensile Modulus, @ 100% Elongation, psi (MPa) @ 300% Elongation, psi (MPa)

D412-98

Tensile Set, %

D412-98

Good

535 (21.1)

Ozone: 100pphm, 40˚C, 28 days

Excellent

Fair

410 (2.8) 800 (5.5)

Fatigue Resistance Ross Flex @ 100CPM

750,000 cycles – 1 inch cut growth

2,000 cycles – 0.1 inch cut growth

Hot Air Heat Aging, 7 days @ 275˚F

+22% tensile, +9% elongation

Crumbled

Hot Air 7 days @ 220˚F

+15% tensile, +14% elongation

-2% tensile, -75% elongation

Unless otherwise noted, all tests were conducted at room temperature (73˚F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

Weather (U.V.)*

NORPRENE™ is a Saint-Gobain Performance Plastics registered trademark.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968

*UV environmental resistance properties are influenced by additives.

Typical Environmental Resistance Ozone, 300pphm

NORPRENE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

These comparisons are based on published material properties and are not guaranteed for all samples or applications. Actual performance will vary, depending on finished part design and requirements.

Excellent

Good

Excellent-Good

Good

Acids

Excellent

Good

Alkalis

Excellent

Good

Lubricating Oils

Fair

Gas Permeability

Fair

Good-Fair

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. FLS-3215-2.5M-0105-SGCS

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

NEW

NORPRENE® Chemical Tubing From the makers of Tygon® tubing Leading today. Shaping tomorrow. Features/Benefits • Long flex life in peristaltic pumps

• Temperature range of -75°F to 165°F

• Superior chemical resistance • Plasticizer-free bore Norprene® Chemical Tubing is designed for use in applications where extractables are a concern.

Unique Combination of Properties

Norprene® Chemical Tubing is a high performance co-extruded product specifically formulated to provide an ideal combination of chemical resistance and pump life. Its inert ultra-smooth plasticizer-free bore resists the absorption/adsorption of aqueous fluids while the Norprene® outer jacket provides long flex life in peristaltic pumps. Norprene® Chemical Tubing is an excellent choice for sensitive fluid transfer applications.

Outstanding Chemical Resistance

The inner liner of Norprene® Chemical Tubing significantly increases the chemical resistance and allows for a broader range of usability. The tubing is virtually unaffected by acids, bases, salts, ketones and alcohols (see “Relative Chemical Resistance Properties” chart on back of sheet) allowing its use in a wide range of chemical applications without the use of multiple tubings.

Superior Pump Life

The outer jacket of Norprene® Chemical Tubing is extremely flexible, expanding the pump life of the tubing and reducing downtime due to pump tubing failure (see “Comparative Peristaltic Pump Tubing Life” chart on back of sheet).

Additional Benefits

Norprene® Chemical Tubing complies with FDA 21 CFR, 177.1520 criteria and is applicable for food contact applications. It is virtually unaffected by most commercial sanitizers and cleaners and can be autoclaved for up to five cycle times without affecting its overall service life.

• Meets FDA criteria for food contact

• Resists absorption/adsorption of aqueous fluids

• Virtually unaffected by chemical sanitizers and cleaners

Typical Applications • Ink and solvent production • Battery acid filling

• Specialty chemical production/ processing • Diagnostic testing

• Sensitive fluid transfer

www.eMurdock.com

www.TheCatalogRoom.com

Norprene® Chemical Tubing Manufactured Sizes and Pressures Saint-Gobain I.D. O.D. Part (inches) (inches) Number

Wall Length Thickness (feet) (inches)

AD300007

1/8

1/4

AD300012

3/16

5/16

1/16

1/4

3/8

1/16

3/8

1/2

1/16

1/2

3/4

1/8

AD300017

AD300027

AD300038

1/16

Minimum Bend Radius (inches)

Max. Suggested Working Pressure at 73°F(psi)* 160°F(psi)*

1/2

1-1/4

2 2-1/4

Vacuum Rating, In. of Mercury 73°F 160°F 29.9

29.9

15.0

25.0

5.0

29.9

25.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

Comparative Peristaltic Pump Tubing Life

Norprene® Chemical Tubing Typical Physical Properties

The table below depicts hours until failure of 1/4" ID x 3/8" OD tubing. In each case, a 3-roller pump head operating at 600 rpm under room temperature (73˚F) conditions was utilized. Tubing failure is measured in hours of use prior to rupture.

Property Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, %

500 hours 800 hours

Norprene® Chemical Tubing 60 hours 65 hours

PVC Tubing Silicone Tubing

ASTM Method Value or Rating

50 hours 75 hours 500

10 psi back pressure

1000

0 psi back pressure

The performance of tubing in peristaltic pumping applications is affected by the conditions of use and equipment utilized, along with size and wall thickness of the tubing tested. The data above is presented for information only and should not be utilized for specification purposes.

—

Cream

D412

1,000 (6.9)

D412

375

Tear Resistance lb-f/inch (kN/m)

D1004

120 (21)

Specific Gravity

D792

0.98

Water Absorption, % 24 hrs. @ 23˚C

D570

‹0.01

D395 Method B

D746

-75 (-60)

—

165 (74)

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

0 50

D2240

Brittleness By Impact Temp., ˚F (˚C) 100

200

300

400

500

Maximum Recommended Temperature, ˚F (˚C)

600

Relative Chemical Resistance Properties Tubing Acids Bases

Norprene® Chemical Tubing

Fluoroelastomers

PVC

Urethane

Thermoplastic Rubber Neoprene

Nitrile Rubber Silicone EVA

Conc. Med. Weak Conc. Med. Weak F

U U U

E F

F F

E E

E = Excellent F = Fair U = Unsatisfactory

E F F

Salts

Alcohols

E F

U F

E F

E E

Ketones F

U U

*All tests conducted at room temperature

NORPRENE® is a Saint-Gobain Performance Plastics registered trademark.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. FLS3287-2.5M-0307-SGCS

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Plasticizer Free Tubing Formulation 2001 Features/Benefits • Plasticizer and oil free — does not contaminate fluids • Superior flex life in peristaltic pumps • Chemically resistant to a wide range of fluids • Temperature resistant from -108°F to 135°F Tygon® Plasticizer Free Tubing resists chemical attack and is a clear, flexible alternative to PVC.

• Clear for easy visual flow monitoring • Meets FDA criteria for food contact

Superior Performance in a Broad Range of Applications Tygon® Plasticizer Free Tubing is uniquely engineered to provide flexibility, chemical resistance and extended pump life in a clear, plasticizer/oil free tubing product. It is ideal for a broad range of demanding applications including peristaltic pump systems, soap and detergent dispensing, ink transfer, water purification lines, food and beverage and chemical transfer.

Typical Applications • Chemical transfer • Peristaltic pumps

Outperforms PVC in Chemical Resistance

• Soap and detergent dispensing

Tygon® Plasticizer Free Tubing is resistant to a wide range of fluids that typically destroy PVC products. Its chemical resistance allows it to be used in applications with aggressive chemicals such as polar solvents, benefiting the user with less downtime and tubing changes. Tygon® Plasticizer Free Tubing yields a longer service life and does not degrade over time, unlike other flexible tubing products (see “Relative Chemical Resistance Chart” on back of sheet).

• Ink transfer

Additional Product Features Upon incineration, many tubing products release hazardous by-products such as hydrogen chloride gas, but when properly incinerated, Tygon® Plasticizer Free Tubing does not. Since it contains no plasticizers or oils, Tygon® Plasticizer Free Tubing will not yield any taste, which makes it an ideal choice for food and beverage applications with strict taste requirements and will help ensure accurate results from analytical instrument tests. Tygon® Plasticizer Free Tubing fully complies with FDA 21 CFR, 177.2600 criteria.

• Water purification lines • Food and beverage • Analytical instruments • Ideal for condensers, incubators, desiccators, gas and drain lines

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® 2001 Manufactured Sizes and Pressures Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Length (feet)

Minimum Bend Radius (inchces)

Max. Working Pressure at 73°F (psi)*

Vacuum Rating, In. of Mercury at 73°F

AE300003

1/16

3/16

1/16

AE300007

1/8

1/4

1/16

1/4

29.9

1/2

AE300012

3/16

5/16

1/16

29.9

1/2

29.9

AE300017

1/4

3/8

1/16

29.9

AE300022

5/16

7/16

1/16

1-1/2

25.0

AE300027

3/8

1/2

1/16

15.0

AE300038

1/2

3/4

1/8

1-1/2

29.9

AE300046

5/8

7/8

1/8

2-1/2

25.0

AE300053

3/4

1/8

15.0

AE300064

1-3/8

3/16

3-3/4

17.0 *Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

TYGON® 2001 Typical Physical Properties

Comparative Peristaltic Pump Tubing Life The table below depicts hours until failure of 1/4" ID x 3/8" OD tubing. In each case, a 3-roller pump head operating at 600 rpm under room temperature (73˚F). Tubing failure is measured in hours of use prior to rupture.

Tygon® 2001 Tubing

Property Durometer Hardness Shore A, 15 Sec

50 hours

100

0 psi back pressure

Tygon® 2001 Fluoroelastomers Urethane PVC Thermoplastic Rubber Neoprene Nitrile Rubber Silicone EVA

Tensile Strength psi (MPa)

D412-98

800 (5.51)

Ultimate Elongation, %

D412-98

500

Tear Resistance lb-f/inch (kN/m)

D1004-03

140 (24.5)

Specific Gravity

D792-00

0.88

Water Absorption, % 24 hrs. @ 23˚C

D570-98

0.04

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

D395-03 Method B

Brittleness By Impact Temp., ˚F (˚C)

D746-98

-108 (-78)

135 (57)

Low Temp Flexibility, °F (°C)

D380.94

-100 (-73)

Dielectric Strength, v/mil (kV/mm)

100

200

300

400

500

600

D149-97

530 (20.9)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412-98

240 (1.65)

Tensile Set, %

D412-98

110

Bases

Conc. Med. Weak Conc. Med. Weak F E E F E E E E E U F F U U U U F F F E E E E E F E E F F U U F E E E E F F E U E E U U U F F U U F E F E E

E = Excellent F = Fair U = Unsatisfactory

Clear

Relative Chemical Resistance Properties Acids

Maximum Recommended Operating Temperature, ˚F (˚C)

Tubing

Value or Rating

D2240-03

Color

100 hours

Typical PVC Tubing

ASTM Method

Salts E E F E E E E F E

Alcohols E F U F F E E F E

Ketones F U U U U U U U U

*All tests conducted at room temperature

TYGON® is a Saint-Gobain Performance Plastics registered trademark.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON Ultra Chemical Resistant Tubing ®

Formulation 2375 (Replaces Tygon® 2075) Provides the highest degree of chemical resistance in clear, flexible tubing Features/Benefits • Improved pressure rating by 30-50% • Outstanding chemical resistance • Non-DEHP for high purity

• Plasticizer-free for low extractables Tygon® 2375 provides the highest degree of chemical resistance in clear, flexible tubing.

Unequaled Chemical Resistance

Until now, many applications for clear flexible tubing were limited due to chemical attack from the fluid being transported. Tygon® 2375 Ultra Chemical Resistant Tubing broadens the range of usability with its expanded chemical resistance. The tubing is virtually unaffected by acids, bases, ketones, salts and alcohols (see Relative Chemical Resistance Properties chart on other side).

Environmentally Friendly

Tygon® 2375 Ultra Chemical Resistant Tubing is unique when it comes to disposing. When properly incinerated, it does not release hazardous and corrosive hydrochloride gas, which contributes to acid rain.

Non-DEHP and Plasticizer Free

Tygon® 2375 Ultra Chemical Resistant Tubing is entirely free of plasticizers, eliminating fluid contamination resulting from leaching plasticizers, a common occurrence with other flexible tubing.

Longer Life

Tygon® 2375 has improved the maximum working pressure by 30-50% compared to 2075. It will not embrittle or crack prematurely due to extraction of plasticizer, thus providing a longer service life.

• Safer disposal – releases no harmful and corrosive hydrochloride gas • Smoother inner surface – provides better flow and inhibits particulate build-up • Low sorption – to minimize cross contamination

• Clear tubing for easier and better observation

• Industry compliances: FDA, EU Food Contact 2002/72/EC, NSF 51 food standards • REACh

Typical Applications • Chemical transfer systems • Transfer lines for chemical analyzers • Detergent supply lines • Battery acid filling • Ink and printing fluid dispensing • Industrial X-ray processing • Power generation sampling and drain lines • Paint and solvent production • Hazardous materials handling • Wine dispensing

www.eMurdock.com Tygon® 2375 Manufactured Sizes and Pressures Saint-Gobain Part Number AJK00002 AJK00003

www.TheCatalogRoom.com

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Max. Working Pressure at 73˚F (psi)*

Minimum Bend Radius (inches)

1/16

3/16

1/16

65.0

1/8

1/16

1/8

1/32

AJK00004

3/32

5/32

1/32

AJK00009

5/32

7/32

1/32

AJK00017

1/4

3/8

1/16

AJK00007 AJK00012

1/8

1/4

3/16

5/16

AJK00022

5/16

7/16

AJK00029

3/8

5/8

AJK00027

AJK00038

AJK00046

AJK00053

AJK00064

3/8

1/2

3/4

29.9

1/4

29.9

20.0

1/4

29.9

25.0

3/4

29.9

40.0

1/16

30.0

1/4

29.9

1/2

29.9

1/16

20.0

1-1/4

1/8

25.0

1-1/8 2-1/2

29.9

3-1/4

25.0

1/16

17.0

1/8

20.0

1-3/8

3/16

19.0

1/8

29.9

1-1/2

25.0

7/8 1

1/4

25.0

1/16

3/4

5/8

40.0

Vacuum Rating, In. of Mercury at 73˚F

20.0

29.9

1-1/2

17.0

29.9

2-3/4

20.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

The values listed for working pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Tygon® 2375 Typical Physical Properties Property

Durometer Hardness Shore A, 15 Sec

ASTM Method

Value or Rating

D2240

–

Clear

D412

1900 (13.1)

D412

850

D1004

240 (42.0)

D792

0.9

D570

<0.01

D395 Method B

100

D746

-103 (<-75)

Color

Tensile Strength psi (MPa) (at break)

Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity

Water Absorption, % 24 hrs. @ 23˚C

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs. Brittleness By Impact Temp., ˚F (˚C)

Maximum Recommended Operating Temp., ˚F (˚C)

–

130 (54)

–

-103 (-75)

D412

425 (2.9)

D412

300

Low Temp. Flexibility, ˚F (˚C)

Tensile Modulus, @ 100% Elongation, psi (MPa) Tensile Set, 75% of Ultimate Elongation, %

Relative Chemical Resistance Properties* Tubing

Tygon® 2375

Acids

Bases

Conc. Med. Weak Conc. Med. Weak Salts Alcohols Ketones F

Urethane

Thermoplastic Rubber

Nitrile Rubber

Fluoroelastomers PVC

Neoprene Silicone EVA

E F

U U

E F

E E

E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperatures.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968 Tygon® is a registered trademark. IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. FLS-3151-PDF-0611-SGCS

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® 3350 Sanitary Silicone Tubing biopharmaceutical products

The platinum-cured silicone tubing with an ultra-smooth inner surface for sanitary transfer of sensitive fluids Features/Benefits • Ultra-Smooth Inner Bore Reduces Potential for Particle Entrapment Competitor A

TYGON® 3350

Competitor B

In a comparison of images of the inner surfaces of TYGON® 3350 silicone tubing and two competitors (captured at 500 x magnification with an electron scanning microscope), TYGON clearly exhibits superior smoothness. As a result, potential for particle entrapment is greatly reduced.

• Minimal Extractables Help Maintain Fluid Integrity • Documented Biocompatibility for Sensitive Applications

“Engineered” Ultra-Smooth Inner Surface

• Excellent Fluid Flow Characteristics

The inner surface of TYGON® 3350 silicone tubing has been designed to reduce the risk of particle entrapment and microscopic build-up during fluid transfer. In-house analysis of the inner surface of TYGON 3350 silicone tubing compared to other silicone tubing shows that it is up to three times smoother. In addition, when compared to stainless steel tubing, TYGON 3350 tubing exhibits a smoother surface by a factor of up to 40.

• Fully Tested to ISO 10993 Standards to Facilitate Validation Process • Complete Inventory of Standard Sizes Available, Including Metric Sizes

A smoother fluid path also helps to facilitate complete sanitation of a fluid transfer system. Even in repeat use applications, TYGON 3350 silicone tubing may prevent residue build-up, aiding in complete cleaning and sterilization.

Typical Applications

Additionally, the smooth inner surface of the TYGON 3350 silicone tubing improves fluid flow characteristics by reducing surface area.

• Pharmaceutical and Cosmetic Processing • Medical Devices

Lower Extractables and Superior Biocompatibility TYGON 3350 silicone tubing is compounded to meet the most demanding requirements of biocompatibility. In-house extractability tests have shown that TYGON 3350 silicone tubing has a low extractable content. Lower extractables help to maintain the purity of transported fluids in sensitive applications. Platinum-cured TYGON 3350 silicone tubing complies fully with the requirements of the USP Class VI Criteria and is entirely non-toxic, non-hemolytic and non-pyrogenic. Additionally, TYGON 3350 silicone tubing meets 3-A Sanitary Standards, FDA 21 CFR Part 177.2600 Criteria and NSF 51 Standard. TYGON 3350 silicone tubing also complies with the ISO 10993 guidelines for contact with blood (or other body fluids and tissue) for up to 30 days as listed in the FDA GP-95.

• Cell Harvest and Media Process Systems • Sterile Fill Lines • Water for Injection (WFI) Transfer • Chemistry and Blood Analyzers • Liquid Chromatography

www.eMurdock.com

TYGON® 3350 Tubing Inventory Sizes Part Number

ABW00001 ABW00002 ABW00003 ABW00004 ABW00005 ABW00006 ABW00007 ABW00009 ABW00011 ABW00012 ABW00013 ABW00014 ABW00016 ABW00017 ABW00018 ABW00019 ABW00022 ABW00023 ABW00027 ABW00028 ABW00029 ABW00032 ABW00033 ABW00036 ABW00037 ABW00038 ABW00045 ABW00046 ABW00053 ABW00062 ABW00069 ABW00074

Wall I.D. O.D. Thickness (inches) (inches) (inches)

1/32 3/32 1/16 1/8 1/16 3/16 3/32 5/32 3/32 7/32 1/8 3/16 1/8 1/4 5/32 7/32 3/16 1/4 3/16 5/16 3/16 3/8 3/16 7/16 1/4 5/16 1/4 3/8 1/4 7/16 1/4 1/2 5/16 7/16 5/16 1/2 3/8 1/2 3/8 9/16 3/8 5/8 7/16 9/16 7/16 5/8 1/2 5/8 1/2 11/16 1/2 3/4 5/8 13/16 5/8 7/8 3/4 1 1 1-1/4 1-1/4 1-1/2 1-1/2 2

Length (feet)

1/32 1/32 1/16 1/32 1/16 1/32 1/16 1/32 1/32 1/16 3/32 1/8 1/32 1/16 3/32 1/8 1/16 3/32 1/16 3/32 1/8 1/16 3/32 1/16 3/32 1/8 3/32 1/8 1/8 1/8 1/8 1/4

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50

TYGON® 3350 Metric Sizes

Minimum Max. Suggested Vacuum Bend Working Rating In. of Radius Pressure at Mercury at (inches) 73°F(psi)* 320°F(psi)* 73°F 320°F

1/8 1/4 1/4 1/4 1/4 3/8 1/2 3/4 1 1/2 3/8 3/8 1-1/2 3/4 5/8 5/8 1-1/4 5/8 1-1/2 1 1 1-1/2 1-3/4 3 1-3/4 1-1/2 3 2-1/2 2-1/2 5 6 7

22 14 22 11 18 9 14 7 7 11 14 18 5 9 12 14 7 10 9 11 12 4 8 5 7 9 6 7 7 5 5 6

www.TheCatalogRoom.com

21 13 21 10 16 8 13 6 6 10 13 16 4 8 11 13 6 9 8 10 11 3 7 4 6 8 5 6 6 4 4 5

29.9 29.9 29.9 29.9 29.9 20.0 29.9 10.0 5.0 25.0 29.9 29.9 1.0 15.0 29.9 29.9 5.0 20.0 5.0 20.0 29.9 2.0 10.0 1.0 5.0 15.0 5.0 10.0 1.0 0.0 0.0 1.0

29.9 29.9 29.9 29.9 29.9 15.0 29.9 10.0 5.0 25.0 29.9 29.9 1.0 15.0 29.9 29.9 5.0 20.0 5.0 15.0 29.9 2.0 10.0 1.0 5.0 15.0 0.0 10.0 1.0 0.0 0.0 1.0

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Part Number

I.D. (mm)

O.D. (mm)

Wall Thickness (mm)

ABW1S1501 ABW1S1502 ABW1S1503 ABW1S1504 ABW1S1505 ABW1S1506 ABW1S1507 ABW1S1508 ABW1S1509

1 2 5 6 7 8 10 12 18

2 4 8 9 10 12 14 16 24

.5 1 1.5 1.5 1.5 2 2 2 3

Length (m)

15 15 15 15 15 15 15 15 15

Minimum Max. Suggested Vacuum Bend Working Rating In. of Radius Pressure at Mercury at (inches) 73°F(psi)* 320°F(psi)* 73°F 320°F

3/8 1/2 3/4 7/8 1 1-1/2 2 2-1/2 3

9 9 7 6 6 6 5.5 5 5

8 8 6 5 5 5 4.5 4 4

29.9 29.9 25.0 15.0 10.0 15.0 5.0 5.0 5.0

*Safety factor of 5 to 1 ratio of burst pressure to working pressure.

TYGON® 3350 Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity Water Absorption, % 24 hrs. @ 23°C Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. @ 347°F (175°C) for 22 hrs. Brittleness by Impact Temp., °F (°C) Maximum Recommended Operating Temp.,°F (°C)

ASTM Method

Value or Rating

D2240-91

— D412-92

Translucent 1,450 (10)

D412-92 D624-91 Die B D792-91 D570-81

770 200 (35) 1.14 0.11

D395-89 Method B

D746-79

7 35 -112 (-80)

—

400 (204)

Dielectric Strength v/mil (kV/mm)

D149-93

480 (19.0)

Tensile Modulus, @ 200% Elongation, psi (MPa)

D412-92

280 (1.9)

Unless otherwise noted, all tests were conducted at room temperature (73ºF [22.8ºC]). Values shown were determined on 0.075" thick molded ASTM plaques or molded ASTM duro-meter buttons.

Sterilization of TYGON® 3350 TYGON TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Autoclavable — Steam 30 minutes at 15 psi (250°F). Gas — Ethylene Oxide. Radiation — Radiation up to 2.5 MRad.

TYGON® 3350 Toxicological Profile

TYGON® is a registered trademark.

The biocompatibility of TYGON 3350 has been tested and found to be nontoxic in the following test protocols:

biopharmaceutical products Come through clean.

Saint-Gobain Performance Plastics 3910 Industrial Drive Beaverton, MI 48612 Tel: (989) 435-9533 Tel: (888) 387-0067 Fax: (989) 435-2355

• USP Systematic Toxicity • USP Intramuscular and Intracutaneous Implant Reactivity • Cytotoxicity

• USP Physico Chemical Tests • USP Pyrogen Test

• Blood Compatibility

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS-3092-1.5M-0403-SGCS

www.biopharm.saint-gobain.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® 3370 I.B. Braid-Reinforced Silicone Hose biopharmaceutical products

The smooth surface, platinum-cured silicone hose designed for transferring high-purity fluid under pressure Features/Benefits • Consistently Smooth Inner Surface Limits Particle Entrapment • Platinum Cured to Minimize Extractables

Designed to Maintain Fluid Purity Under Pressure Braid reinforced for increased pressure resistance, TYGON® 3370 I.B. silicone hose is frequently specified in the most demanding applications requiring sanitary transfer of fluids. Its smooth inner surface reduces the risk of particle entrapment and inhibits microscopic bacterial build-up. Cleaning and sterilization cycles also may become more effective from this smooth inner surface by helping to prevent excessive residue buildup during use. Additionally, an improvement in fluid flow characteristics may occur from the reduced surface area and lowered absorption of fluids to the wall. TYGON® 3370 I.B. can easily withstand repeated SIP and CIP cleaning and sterilization cycles, making it ideal for repeat-use applications. Its flexibility, durability, chemical and temperature resistance provide a unique combination of characteristics required in many pharmaceutical, biotechnology, laboratory, food, beverage, cosmetic, environmental, and industrial applications.

Lower Extractables and Exceptional Biocompatibility

• Tough Braid Reinforcement Permits Use Under Elevated Working Pressures • Withstands Repeated CIP and SIP Cleaning and Sterilization • Custom Color Striping Available

Typical Applications • Sterile Filling • Media Dispensing • Vaccine Manufacturing • Bioreactor Process Lines

TYGON® 3370 I.B. silicone hose is produced from a platinum curing process to meet the most demanding requirements of biocompatibility.

• Water Purification Systems

In-house extractability tests have shown that TYGON® 3370 I.B. hose has a low extractable content. Lower extractables help to maintain the purity of transported fluids in sensitive applications.

• Diagnostic Test Product Manufacturing

TYGON 3370 I.B. hose complies fully with the requirements of the USP Class VI Criteria and is entirely non-toxic, non-hemolytic and non-pyrogenic. Continued monitoring of the hose also ensures minimal bioburden levels are maintained. TYGON® 3370 I.B. hose also meets 3-A Sanitary Standard No. 18-01 and FDA 21 CFR Part 177.2600 Criteria. TYGON® 3370 I.B. silicone hose has a masterfile with the U.S Food and Drug Administration.

• Food and Dairy Processing

• Sanitary Fitting Assembly

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® 3370 I.B. Hose Inventory Sizes Part Number AHJ001718 AHJ001719 AHJ001720 AHJ001721 AHJ001722 AHJ001671 AHJ001724 AHJ421725 AHJ421726

I.D. (inches) 3/16 1/4 3/8 1/2 5/8 3/4 1 1-1/4 1-1/2

O.D. (inches) .443 .515 .687 .847 .980 1.150 1.390 1.636 1.900

Minimum Bend Radius 1/4 1/2 3/4 1-1/4 1-1/2 2-1/4 3-1/2 5-3/4 6-3/4

Length (feet) 50 50 50 50 50 50 50 25 25

Max. Working Pressure at 73°F at 320°F (psi ) * (psi)* 170 125 150 105 130 95 125 90 110 80 100 75 70 50 55 40 40 30

Vacuum Rating In. of Mercury at 73°F at 320°F 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 15.0 10.0 10.0 5.0 5.0 0.0

*Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599.

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the hose’s ability to withstand pressures, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the hose for use.

TYGON® 3370 I.B. Toxicological Profile The biocompatibility of TYGON 3370 I.B. has been tested and found to be non-toxic in the following test protocols: USP Systemic Toxicity and Intracutaneous Reactivity USP Intramuscular Implant Cytotoxicity Blood Compatibility USP Physico Chemical Tests

TYGON® 3370 I.B. Sterilization Methods Autoclavable — Steam 30 minutes at 15 psi (250°F) Gas — Ethylene Oxide Radiation — Radiation up to 2.5 MRad

TYGON® 3370 I.B. Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity Water Absorption, % 24 hrs. @ 23°C Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. @ 347°F (175°C) for 22 hrs. Brittleness by Impact Temp., °F (°C) Maximum Recommended Operating Temp.,°F (°C)

ASTM Method

Value or Rating

D2240

— D412

Translucent 1,200 (8.3)

D412 D624 Die B D792 D570

500 250 (44) 1.18 0.11

D395 Method B

D746

3 10 -112 (-80)

—

320 (160)

Dielectric Strength v/mil (kV/mm)

D149

600 (24)

Tensile Modulus, 200% psi (MPa)

D412

650 (4.5)

Tensile Set, %

D412

Unless otherwise noted, all tests were conducted at roomtemperature (73°F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

TYGON HOSE IS NOT INTENDED FOR USE AS AN IMPLANT MATERIIAL TYGON® is a registered trademark.

biopharmaceutical products Come through clean.

Saint-Gobain Performance Plastics 3910 Terry-Diane Beaverton, MI 48612 Tel: (989) 435-9533 Tel: (888) 387-0067 Fax: (989) 435-2355

Verneret La Mothe-Aux-Aulnaies 89120 Charny, France Tel: 33-386-637-878 Fax: 33-386-637-777

IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS-3181A-1M-1206-SGCS

www.biopharm.saint-gobain.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Beverage Tubing FORMULATION B-44-3 Most Widely Specified Clear, Flexible Tubing Features/Benefits The most widely specified clear, flexible tubing, Tygon® Beverage Tubing is frequently chosen for its taste- and odor-free characteristics

• Clear as glass for easy visual monitoring of flow

Versatile, High-Performance Tubing

• Lightweight and flexible for easy, quick installation

Tygon® Beverage Tubing is specially formulated for transferring a wide variety of beverages

• Broad chemical resistance

including soft drinks, fruit juices, flavored teas and bottled water. In virtually all cases, Tygon® Beverage Tubing will not affect the taste or odor of product transferred through it, while its excellent non-wetting properties facilitate complete drainage and permit simple flush-cleaning. Many of the unique properties inherent to Tygon® Beverage Tubing also apply to a wide variety of complex applications, ranging from fine cosmetic production to the dispensing of water-based printing inks found in the publishing industry. The versatility and proven performance of Tygon®

• Non-wetting properties allow easy cleaning and complete drainage • Meets FDA, 3-A and NSF criteria

Beverage Tubing have made it today’s most widely specified clear, flexible plastic tubing.

Lightweight and Flexible Light in weight and easy to handle, Tygon® Beverage Tubing can be put into service quickly. It readily bends to accommodate abrupt corners and obstructions, requiring a minimum of couplings

Typical Applications • Chemical processing

and fittings.

• Appliance

Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel or plastic piping.

• Food and beverage

Clear as Glass

• Photoprocessing

The glass-like clarity of Tygon® Beverage Tubing allows the user to see product flow through it so visual monitoring of flow is easy. This is particularly helpful in controlling or adjusting flow during processing.

• Printing and publishing

Meets FDA, NSF and 3-A Criteria Non-toxic, taste-free and odor-free, Tygon® Beverage Tubing meets applicable regulatory standards for contact with food products. Tygon® Beverage Tubing is NSF listed under Standard 51. This standard covers plastic materials and components for use in food and beverage processing and dispensing equipment. It also meets FDA 21 CFR, 175.300 criteria and 3-A Plastics Standard Criteria for use in handling foods and beverages.

Different Sizes Available Tygon® Beverage Tubing is available in sizes ranging from 1/16" I.D. to 3-1/2" O.D. – all through our nationwide network of general plastics distributors. Leave it to Saint-Gobain Performance Plastics to provide that kind of convenience for you to select the right tubing for your application.

• Metal finishing

• Pharmaceutical • Cosmetic • Garden and recreational equipment

www.eMurdock.com

www.TheCatalogRoom.com

Tygon® B-44-3 Tubing Inventoried Sizes Saint-Gobain I.D. Part Number (inches)

AAB00002 AAB02002 AAB04002 AAB00003 AAB00004 AAB00005 AAB00006 AAB02006 AAB00007 AAB02007 AAB04007 AAB00009 AAB00010 AAB00011 AAB00012 AAB00013 AAB00014 AAB00016 AAB00017 AAB00018 AAB00019 AAB00022 AAB00023 AAB00024 AAB00027 AAB00028 AAB00029 AAB00034 AAB00036 AAB00037 AAB00038 AAB00046 AAB00051 AAB00053 AAB00059 AAB00062 AAB00064 AAB00065 AAB00069 AAB00070 AAB00071 AAB00073 AAB00074 AAB00076 AAB00078 AAB05080 AAB05081

1/16 1/16 1/16 1/16 3/32 3/32 1/8 1/8 1/8 1/8 1/8 5/32 5/32 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 7/16 1/2 1/2 1/2 5/8 11/16 3/4 7/8 1 1 1 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4 2 2 2-1/4

O.D. (inches)

Wall Thickness (inches)

1/8 1/8 1/8 3/16 5/32 7/32 3/16 3/16 1/4 1/4 1/4 7/32 9/32 1/4 5/16 3/8 7/16 5/16 3/8 7/16 1/2 7/16 1/2 9/16 1/2 9/16 5/8 11/16 5/8 11/16 3/4 7/8 15/16 1 1-1/8 1-1/4 1-3/8 1-1/2 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 2-1/2 3 2-3/4

1/32 1/32 1/32 1/16 1/32 1/16 1/32 1/32 1/16 1/16 1/16 1/32 1/16 1/32 1/16 3/32 1/8 1/32 1/16 3/32 1/8 1/16 3/32 1/8 1/16 3/32 1/8 1/8 1/16 3/32 1/8 1/8 1/8 1/8 1/8 1/8 3/16 1/4 1/8 3/16 1/4 3/16 1/4 1/4 1/4 1/2 1/4

Tygon® B-44-3 Tubing Typical Physical Properties

Length (feet)

Minimum Bend Radius (inches)

Max. Working Pressure at 73°F (psi)*

Vacuum Rating In. of Mercury at 73°F

50 100 500 50 50 50 50 100 50 100 500 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20

1/4 1/4 1/4 1/8 3/8 1/4 1/2 1/2 3/8 3/8 3/8 3/4 1/2 1 5/8 1/2 3/8 1-5/8 1 3/4 5/8 1-3/8 1 7/8 1-3/4 1-3/8 1-1/8 1-3/8 2-7/8 2-1/8 1-3/4 2-3/8 2-7/8 3-1/4 4-1/8 5-1/8 3-3/4 3 7-3/8 5-1/2 4-3/8 7-1/4 5-7/8 7-1/2 9-3/8 5-1/2 11-1/4

70 70 70 108 47 78 45 45 62 62 62 31 52 34 45 62 78 28 36 49 62 30 41 52 26 36 45 39 20 28 36 30 28 26 23 20 28 36 17 24 30 20 26 23 20 36 19

29.9 29.9 29.9 29.9 29.9 29.9 25.0 25.0 29.9 29.9 29.9 16.0 29.9 11.0 29.9 29.9 29.9 6.0 25.0 29.9 29.9 16.0 29.9 29.9 11.0 25.0 29.9 29.9 6.0 14.0 25.0 16.0 13.0 11.0 8.0 6.0 14.0 25.0 4.0 9.0 16.0 6.0 11.0 8.0 6.0 25.0 5.0

Property Durometer Hardness Shore A, 15 Sec Color

ASTM Method

Value or Rating

D2240-03

—

Clear

Tensile Strength psi (MPa)

D412-98

2,300 (15.8)

Ultimate Elongation, %

D412-98

410

Tear Resistance lb-f/inch (kN/m)

D1004-03

180 (32)

Specific Gravity

D792-00

1.20

Water Absorption, % 24 hrs. @ 23°C

D570-98

0.13

D395-03 Method B

D746-98

-49 (-45)

—

165 (74)

Dielectric Strength, v/mil (kV/mm)

D149-97

518 (20.4)

Tensile Modulus, @ 200% Elongation, psi (MPa)

D412-98

1,760 (12.1)

Tensile Set, %

D412-98

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. Brittleness By Impact Temp., °F (°C) Maximum Recommended Operating Temp., °F (°C)

TYGON® BEVERAGE TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

Tygon® is a registered trademark.

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Food, Milk and Dairy Tubing FORMULATION B-44-4X The preferred clear, flexible tubing for food processing applications With its smooth non-porous bore, Tygon® Food, Milk and Dairy Tubing helps ensure a bacterial-free fluid path in a wide variety of food processing applications.

Preferred Tubing of the Food Industry

Producers of food, milk and dairy products insist upon Tygon® Food, Milk and Dairy Tubing for dependable performance in countless filling, draining, transfer and processing applications. Its smooth, non-porous bore inhibits particle entrapment, promoting a sanitary fluid path by minimizing potential for bacterial growth. It has outstanding resistance to harsh alkaline cleaners and is equally unaffected by commonly used sanitizers.

Lightweight and Flexible

Light in weight and easy to handle, Tygon® Food, Milk and Dairy Tubing can be put into service quickly. It readily bends to accommodate abrupt corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel or plastic piping.

Meets FDA, NSF and 3-A Criteria

Non-toxic, taste-free and odor-free, Tygon® Food, Milk and Dairy Tubing meets applicable regulatory standards for contact with food products. Tygon® Food, Milk and Dairy Tubing is NSF listed under Standard 51. This standard covers plastic materials and components for use in food and beverage processing and dispensing equipment. It also meets FDA 21 CFR, 175.300 criteria and 3-A Plastics Standard Criteria for use in handling foods and beverages.

Available in Large Bore Sizes

Tygon® Food, Milk and Dairy Tubing is available in large bore sizes up to 6" inside diameter, making it a flexible alternative to rigid piping systems. It offers complete clarity for positive visual inspection and flow control.

Reinforced Tubing Available for Elevated Pressure

A special construction of Tygon® Food, Milk and Dairy Tubing is also available to meet applications involving elevated pressure. In these instances, select Tygon® Pressure Tubing, Formulation B-44-4X I.B. Tygon® Pressure Tubing has the identical product features found in Tygon® Food, Milk and Dairy Tubing, with reinforcement added to withstand up to four times the pressure.

Features/Benefits • Smooth, non-porous bore will not trap particulates or promote bacteria growth • Compatible with foods containing a high oil content

• Resistant to harsh alkaline cleaners and sanitizers

• Excellent alternative to rigid piping systems

• Meets FDA, 3-A and NSF criteria

Typical Applications • Aseptic filling

• Condiment dispensing • Dairy processing

• Vitamin and flavor concentrate systems

• Soft-serve dispensing

www.eMurdock.com

www.TheCatalogRoom.com

Tygon® B-44-4X Tubing Manufactured Sizes and Pressures

Saint-Gobain Wall Minimum Part I.D. O.D. Thickness Length Bend Radius Number (inches) (inches) (inches) (feet) (inches)

AAA00001 AAA00002 AAA00003 AAA00004 AAA00006 AAA00007 AAA00009 AAA00010 AAA00011 AAA00012 AAA00013** AAA00017 AAA00018 AAA00019 AAA00022 AAA00023 AAA00024 AAA00025** AAA00027 AAA00028 AAA00029 AAA00032** AAA00033** AAA00036 AAA00037 AAA00038 AAA00039 AAA00041** AAA00045 AAA00046 AAA00047 AAA00053 AAA00054 AAA00055 AAA00057 AAA00059 AAA00062 AAA00063 AAA00064 AAA00065 AAA00067 AAA00070 AAA00073** AAA00074 AAA00078 AAA05078 AAA05079** AAA05080** AAA05082 AAA05083** AAA05085 AAA05086** AAA05088** AAA06088 AAA05318** AAA06318**

1/32 1/16 1/16 3/32 1/8 1/8 5/32 5/32 3/16 3/16 3/16 1/4 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 7/16 7/16 1/2 1/2 1/2 1/2 9/16 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 1 1 1 1 1-1/8 1-1/4 1-1/2 1-1/2 2 2 2 2 2-1/2 2-1/2 3 3 4 4 6 6

3/32 1/8 3/16 5/32 3/16 1/4 7/32 9/32 1/4 5/16 3/8 3/8 7/16 1/2 7/16 1/2 9/16 5/8 1/2 9/16 5/8 9/16 5/8 5/8 11/16 3/4 13/16 3/4 13/16 7/8 15/16 1 1-1/16 1-1/8 1-1/4 1-1/8 1-1/4 1-5/16 1-3/8 1-1/2 1-3/8 1-5/8 1-7/8 2 2-1/2 2-1/2 2-3/4 3 3 3-1/4 3-1/2 3-3/4 5 5 6-1/2 6-1/2

1/32 1/32 1/16 1/32 1/32 1/16 1/32 1/16 1/32 1/16 3/32 1/16 3/32 1/8 1/16 3/32 1/8 5/32 1/16 3/32 1/8 1/16 3/32 1/16 3/32 1/8 5/32 3/32 3/32 1/8 5/32 1/8 5/32 3/16 1/4 1/8 1/8 5/32 3/16 1/4 1/8 3/16 3/16 1/4 1/4 1/4 3/8 1/2 1/4 3/8 1/4 3/8 1/2 1/2 1/4 1/4

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20 20 20 20 20 20 20 20 10 20 10

1/8 1/4 1/8 3/8 1/2 3/8 3/4 1/2 1 5/8 1/2 1 3/4 5/8 1-3/8 1 7/8 3/4 1-3/4 1-3/8 1-1/8 2-1/4 1-3/4 2-7/8 2-1/8 1-3/4 1-1/2 2-1/2 3 2-3/8 2 3-1/4 2-3/4 2-3/8 2 4-1/8 5-1/8 4-3/8 3-3/4 3 6-1/4 5-1/2 7-1/4 5-7/8 9-3/8 9-3/8 6-7/8 5-1/2 13-3/8 10 18 13-1/4 17 17 55-3/8 55-3/8

Max. Working Vacuum Rating Pressure In. of Mercury at 73°F (psi)* at 73°F 100 60 100 43 34 60 28 50 25 43 60 34 47 60 28 40 50 60 25 34 44 22 30 19 27 34 40 25 23 29 35 25 30 34 43 22 20 24 27 34 18 23 19 25 19 19 27 34 16 23 14 19 19 19 8 8

* Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. ** Made to order, minimums will apply.

29.9 29.9 29.9 29.9 25.0 29.9 16.0 29.9 11.0 29.9 29.9 25.0 29.9 29.9 16.0 29.9 29.9 29.9 11.0 25.0 29.9 8.0 19.0 6.0 14.0 25.0 29.9 11.0 9.0 16.0 26.0 11.0 18.0 26.0 29.9 8.0 6.0 10.0 14.0 25.0 5.0 9.0 6.0 11.0 6.0 6.0 14.0 25.0 4.0 9.0 2.0 6.0 6.0 6.0 0.5 0.5

Tygon® B-44-4X Tubing Typical Physical Properties Property

ASTM Method Value or Rating

Durometer Hardness Shore A, 15 Sec Color

D2240

—

Clear

Tensile Strength psi (MPa)

D412

2,100 (14.5)

Ultimate Elongation, %

D412

450

Tear Resistance lb-f/inch (kN/m)

D1004

200 (35)

Specific Gravity

D792

1.21

Water Absorption, % 24 hrs. @ 23°C

D570

0.15

D395 Method B

Brittleness By Impact Temp., °F (°C)

D746

-47 (-44)

Maximum Recom- mended Operating Temp., °F (°C)

—

165 (74)

Dielectric Strength, v/mil (kV/mm)

D149

518 (20.4)

Tensile Modulus, @ 200% Elongation, psi (MPa)

D412

1,760 (12.1)

Tensile Set, %

D412

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs.

TYGON® FOOD, MILK AND DAIRY TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Pressure Formulation B-44-4X I.B. Unique Flexibility Permits Use Where Other Reinforced Tubings Kink and Collapse Features / Benefits • Handles Four Times the Pressure of Non-Reinforced Tubing Reinforced to provide increased pressure capability, Tygon® B-44-4X I.B. tubing is the most flexible reinforced tubing available.

• Smooth, Non-Porous Bore Resists Particle Entrapment

Versatility Provides the Solution to Many Applications Tygon® B-44-4X I.B. Pressure Tubing can be used to transport many types of fluids in applications ranging from those regulated by FDA guidelines to industrial and laboratory applications involving virtually all non-solvent based chemicals.

• Clear Wall Enables Visualization of Fluid Flow

Flexibility to Deal with the “Twists and Turns”

• Connects Easily to ReSeal® Sanitary Fittings

Lightweight and easy to handle, Tygon® B-44-4X I.B. Pressure Tubing goes into service quickly. It readily curves around corners and obstructions, requiring a minimum of couplings and fittings. Its flexibility can save up to one-third the footage and much of the labor required to install rigid stainless steel, glass tubing or piping.

• Meets FDA, 3-A and NSF Criteria Typical Applications Include:

Reduces the Risk of Bacterial Contamination

• Cosmetic Production

Tygon® B-44-4X I.B. tubing’s smooth non-porous inner bore resists particle entrapment and resultant bacterial growth. Its excellent non-wetting properties facilitate complete drainage and increase the overall effectiveness of cleaning, making it the ideal choice in food, beverage, dairy, and other bacterial sensitive applications. Virtually taste and odor free Tygon® B-44-4X I.B. Pressure Tubing fully complies with FDA 175.300 criteria and the 3-A Sanitary Standards for food contact applications as well as being listed under the NSF Standard 51. Custom antimicrobial version available upon request.

• Food and Dairy Processing • Beverage Dispensing • Pharmaceutical Filling • Water Purification Systems • Printing Equipment • Coolant Lines • Chemical Transfer

Ideal for Use with ReSeal® Reusable Sanitary Fittings By combining Tygon® B-44-4X I.B. tubing with ReSeal® Reusable Fittings, complete assemblies can be constructed, providing a contamination free environment that maintains the purity of fluids being transferred. ReSeal® assemblies are easy to install and can increase manufacturing efficiency by providing a fluid path that is repeatedly sterilizable using many conventional clean-in-place methods.

• Instrumentation and Air Supply

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Pressure Formulation B-44-4X I.B. Tygon® B-44-4X I.B. Manufactured Sizes and Pressures Norton Part Number ADA00018 ADA00029 ADA00038 ADA00046 ADA00053 ADA00064 ADA00070 ADA00074 ADA05074 ADA06074 ADA05079 ADA06079 ADA05086 ADA06086

Wall I.D. O.D. Thickness (inches) (inches) (inches) 1/4 7/16 3/32 3/8 5/8 1/8 1/2 3/4 1/8 5/8 7/8 1/8 3/4 1 1/8 1 1-3/8 3/16 1-1/4 1-5/8 3/16 1-1/2 2 1/4 1-1/2 2 1/4 1-1/2 2 1/4 2 2-3/4 3/8 2 2-3/4 3/8 3 3-3/4 3/8 3 3-3/4 3/8

Length (feet) 50 50 50 50 50 50 50 50 20 10 20 10 20 10

Max. Bend Radius (inches) 1-1/2 1-1/8 2-1/8 2-3/8 3-1/4 3-3/4 5-1/2 5-7/8 5-7/8 5-7/8 6-7/8 6-7/8 13-1/4 13-1/4

Max. Working Pressure at 73°F (PSI)* at 160°F (PSI)* 250 90 170 90 200 95 165 105 145 85 100 60 85 55 75 45 75 45 75 45 60 40 60 40 40 25 40 25

Vacuum Rating In. of Mercury at 73°F (PSI)* at 160°F (PSI)* 29.9 29.9 29.9 25.0 29.9 10.0 25.0 10.0 20.0 5.0 20.0 5.0 10.0 3.0 10.0 2.0 10.0 2.0 10.0 2.0 25.0 10.0 25.0 10.0 10.0 1.0 10.0 1.0

*Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599.

Tygon® B-44-4X I.B. Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity Water Absorption, % 24 hrs. @ 23°C Compression Set Constant Deflection, % @158°F (70°C) for 22 hrs. Brittleness By Impact Temp.,°F (°C) Maximum Recommended Operating Temp., °F (°C) Dielectric Strength, v/mil (kV/mm) Tensile Modulus, @ 100% Elongation, psi (MPa) Tensile Set, %

ASTM Method D2240-02 D412-98 D412-98 D1004-94 D792-00 D570-98 D395-01 Method B D746-98 -

Value or Rating 65 Clear 2,100 (14.5) 450 200 (35) 1.21 0.15

D149-97 D412-98

517 (20.3) 1,150 (7.9)

D412-98

Distributed by:

62 -47 (-44) 165 (74) TYGON® B-44-4X I.B. TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

North America Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 1-800-798-1554 / 330-798-9240 Fax 330-798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective or at our option to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse or inability to use this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk. FLS-3081-5M-0103-FPH

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Fuel and Lubricant Tubing FORMULATION F-4040-A High performance fuel and lubricant tubing designed for today’s small engines Features/Benefits • Resists embrittlement • Compatible with most hydrocarbons • Resistant to swelling • Highly flexible, easy to install Designed for safe and efficient handling of most petroleum-based products, Tygon® Fuel and Lubricant Tubing resists embrittlement, cracking and swelling.

Designed to Resist Hydrocarbons

Specifically designed to handle most fuels and industrial lubricants, Tygon® Fuel and Lubricant Tubing resists the swelling and hardening caused by hydrocarbon-based fluids. This significantly reduces the risk of failure due to cracking and leakage. Its minimum extractability safeguards the liquid or vapor being transferred against adulteration. Because it’s extremely flexible, Tygon® Fuel and Lubricant Tubing simplifies installation, even in tight places. It is translucent yellow for positive identification and to allow easy flow monitoring. It is routinely used to handle gasoline, kerosene, heating oils, cutting compounds and glycol-based coolants.

Low Rate of Permeation

In-house testing of Tygon® Fuel and Lubricant Tubing has shown it to have a lower rate of permeation than competitive tubings. Reduced levels of permeation may limit alteration and loss of fuels critical to today’s high performance engines.

Routinely Specified in Fuel and Lubricant Applications

A consistent performer lot after lot, Tygon® Fuel and Lubricant Tubing is the most requested fuel and lubricant tubing for a variety of applications — from small engine fuel lines to coolant transfer. Other Tygon® formulations available to meet new permeation standards.

• Specifically developed for fuels and lubricants • Ozone and UV light resistant

Typical Applications • Small engine fuel lines • General automotive • Recreational vehicles • Lawn and garden equipment • Coolant transfer • Heating fuels • Cutting compounds • Polishing equipment • Lubrication lines

www.eMurdock.com

www.TheCatalogRoom.com

Tygon® F-4040-A Manufactured Sizes and Pressures Saint-Gobain Part I.D. O.D. Number (inches) (inches)

Wall Thickness Length (inches) (feet)

AAG00700

.080

.140

.030

Minimum Bend Radius (inches)

Max. Working Pressure at 73°F (psi)*

Vacuum Rating In. of Mercury at 73°F

1/4

29.9

AAG00165

3/32

3/16

3/64

1/4

29.9

AAG00007

1/8

1/4

1/16

3/8

29.9

AAG00012

3/16

5/16

1/16

5/8

29.9

AAG00017

1/4

3/8

1/16

22.0

AAG00022

5/16

7/16

1/16

1-3/8

14.0

AAG00027

3/8

1/2

1/16

1-7/8

10.0

AAG00029

3/8

5/8

1/8

1-1/8

29.9

AAG00032

7/16

9/16

1/16

2-3/8

7.0

AAG00036

1/2

5/8

1/16

2-7/8

5.0

AAG00038

1/2

3/4

1/8

1-3/4

22.0

AAG00046

5/8

7/8

1/8

2-1/2

14.0

AAG00053

3/4

1/8

3-1/4

10.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. The values listed for working pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Tygon® F-4040-A Typical Physical Properties Property

Comparative Fuel Permeation Rate of Tubing

ASTM Method

Value or Rating

D2240

—

Translucent Yellow

Tensile Strength, psi (MPa)

D412

1,820 (12.5)

Ultimate Elongation, %

D412

310

Tear Resistance, lb-f/inch (kN/m)

D1004

167 (29)

Specific Gravity

D792

1.26

Water Absorption, % 24 hrs. @ 23°C

D570

0.49

D395 Method B

D746

-35 (-37)

—

165 (74)

Dielectric Strength, v/mil (kV/mm)

D149

403 (15.8)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412

910 (6.3)

Tensile Set, %

D412

Durometer Hardness Shore A, 15 Sec Color

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. Brittleness By Impact Temp., °F (°C) Maximum Recommended Operating Temp., °F (°C)

The table below summarizes the results of an in-house study conducted on permeation of unleaded, alcohol-free 87 octane gasoline in 1/4" ID x 3/8" OD tubing. Testing was conducted in accordance with SAE J1527. Tygon® F-4040-A Tubing Competitive Fuel Tubing

70 125

20 40 60 80 100 120

Fuel Permeation Rate (gm/m2/24 hours)

The performance of tubing is affected by the conditions of use and equipment utilized, along with size and wall thickness of the tubing tested. The data above is presented for information only and should not be utilized for specification purposes.

Tygon® is a registered trademark.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® LFL Long Flex Life Pump Tubing biopharmaceutical products

Long flex life pump tubing formulated specifically for use in peristaltic pump applications Features/Benefits • Longest Flex Life of Any Clear TYGON® Tubing Crystal-clear TYGON® Long Flex Life Pump Tubing optimizes peristaltic pump performance in numerous applications including bulk transfer.

• Extremely Low Particulate Spallation • Broad Chemical Resistance

Peristaltic Pump Systems Limit Risk of Fluid Contamination Peristaltic pumping offers the advantage of efficiently transporting fluids without risking contact with any portion of the pump itself. To accomplish this, flexible tubing is inserted between the pump rollers and housing. As the rollers rotate around a stationary rotor, the tubing is “squeezed,” or occluded, pushing the fluid along through the inside tubing surface. As the tubing behind each roller recovers its shape, a vacuum is created, draining additional fluid from behind the occluded tubing. During this process the fluid is contained entirely within the flexible tubing, eliminating exposure (and risk of fluid contamination) to any components of the pump.

Proper Tubing Selection Leads to Optimal Performance ®

Crystal-clear TYGON Long Flex Life Pump Tubing is formulated specifically for use in peristaltic pump applications. With its superior flex life characteristics, manufacturing processes can be simplified by reducing production downtime due to pump tubing failure. (See Comparative Peristaltic Pump Tubing Life chart on back of page.) In-house tests indicate the excellent wear properties of TYGON Long Flex Life Pump Tubing also lead to a reduction of particulate spallation. Limiting particle spallation can reduce the need for frequent downstream filter replacement. This unique feature can also reduce the risk of sensitive-fluid contamination critical to many applications found in the pharmaceutical, cosmetic, food and high purity chemical industries.

Numerous Benefits to Specifying TYGON Long Flex Life Tubing Non-aging characteristics and broad chemical resistance provide users with versatility for a wide variety of applications. Safe and non-toxic TYGON Long Flex Life Pump Tubing can be produced in up to a 6" inside diameter, making it the ideal choice in bulk transfer applications. Additionally, TYGON Long Flex Life Tubing will withstand virtually all commercial cleaning agents and bactericides without danger of corrosion (as with metals) or oxidation (as with rubber). TYGON Long Flex Life Tubing can also be sterilized through conventional autoclave methods (steam 30 minutes at 15 psi), making it ideal for use in high purity process applications.

• Meets USP Class VI and FDA Criteria

Typical Pump Applications • Production Filtration and Fermentation • Food and Cosmetic Processing • Flavor and Vitamin Concentrate Dispensing • Surfactant Delivery • Printing Ink Transfer • Plating Chemicals Delivery • Drum and Tank Drainage • Highly Viscous Fluid Transfer • Shear-sensitive Fluid Transfer

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® LFL Tubing Inventoried Sizes Part Number AVW42003 AVW42007 AVW42012 AVW42017 AVW42019 AVW42022 AVW42029 AVW42038 AVW06057 AVW06064

I.D. (inches) 1/16 1/8 3/16 1/4 1/4 5/16 3/8 1/2 3/4 1

O.D. (inches) 3/16 1/4 5/16 3/8 1/2 7/16 5/8 3/4 1-1/4 1-3/8

Wall Thickness (inches) 1/16 1/16 1/16 1/16 1/8 1/16 1/8 1/8 1/4 3/16

Length (feet) 25 25 25 25 25 25 25 25 10 10

Minimum Bend Radius (inches) 1/4 1/2 3/4 1 3/4 1-1/4 1 1-1/2 1-3/4 3-1/4

Max. Suggested Working Pressure at 73°F (psi)* 60°F (psi)* 50 14 33 10 25 7 20 6 35 9 15 5 25 7 20 6 24 9 15 5

Vacuum Rating In. of Mercury 73°F 160°F 29.9 29.9 29.9 29.9 29.9 20.0 15.0 5.0 29.9 29.9 10.0 5.0 29.9 10.0 20.0 10.0 29.9 15.0 5.0 ≤2.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Comparative Peristaltic Pump Tubing Life The table below depicts hours until failure of 1/4" ID x 3/8" OD tubing. In each case, a 3-roller pump head was utilized operating at 600 rpm under room temperature (73° F). Tubing failure is measured in hours of use prior to rupture.

650-700 Hours

TYGON® LFL

800 Hours 20 Hours

PVC Tubing

25 Hours 1

100

1000

10 psi back pressure

0 psi back pressure

TYGON® LFL Typical Physical Properties Property

ASTM Method

Value or Rating

D2240-91

— D412-92

Clear 1,550 (10.7)

D412-92 D1004-93

380 122 (21)

D792-91 D570-81

1.16 0.18

D395-89 Method B

D746-79

-65 (-54)

—

165 (74)

D380-87

-94 (-70)

Dielectric Strength v/mil (kV/mm)

D149-93

414 (16.3)

Tensile Modulus, @ 100% psi (MPa) @ 200% psi (MPa)

D412-92

Tensile Set, %

D412-92

Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity Water Absorption, % 24 hrs. @ 23°C Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. Brittleness by Impact Temp., °F (°C) Maximum Recommended Operating Temp.,°F (°C) Low Temp. Flexibility, °F (°C)

600 (4.1) 900 (6.2) 44

TYGON TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

biopharmaceutical products Come through clean.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: (330) 798-9240 Tel: (800) 798-1554 Fax: (330) 798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS-3090-1.5M-0403-SGCS

www.biopharm.saint-gobain.com

Tygon® LP1000 Marine Fuel Line Tubing | Saint-Gobain Performance Plastics, Process ... www.eMurdock.com www.TheCatalogRoom.com

Change: English

Page 1 of 1

» Home

» About Us

Products

» Tygon S3™

» Product Category

» Markets

» Tools & Reference » News & Events » Contact Us

Home > Products >

Related Links

Tygon® Flexible Tubing

Tygon®

Printer Friendly Contact Us

Tygon® LP1000 Marine Fuel Line Tubing

All Products

Tygon® Marine Fuel Line Tubing Formulation LP1000 Tygon® LP1000 Low Permeation Marine Fuel Line Tubing is one of several new CARB and EPA certified products offered by SaintGobain Performance Plastics with a thermoplastic liner. This thermoplastic liner creates better fitting retention and an easier/faster assembly process. Tygon® LP1000 is opaque gray in color and is ozone and UV light resistant. CARB approved, Executive Order Number: Q-08-032, sizes 3/32” ID and above EPA approved, SGN-EVAPNR-09-02, sizes 3/32” ID and above. Features & Benefits

Product Features • • • • • • • • • • • • •

Conforms to proposed EPA 40 CFR 1060 regulations Conforms to EPA 40 CFR 1051 recreational engines and vehicles Conforms to CA SORE Chapter 15, Article 1 UL 94 HB (liner and cover) Thermoplastic liner creates better fitting retention Excellent bend radius resulting in kink resistance Resistant to premature aging Ozone and UV light resistant Custom colored jacket capabilities Does not use carbon black as UV protective barrier Available in sizes 3/32” I.D and above Thermoplastic liner creates better fitting retention Thermoplastic liner creates easier/faster assembly process

Other Saint-Gobain Web Sites | Contact Us | Legal | Site Map

http://www.processsystems.saint-gobain.com/product_detail.aspx?id=250544

12/13/2012

www.eMurdock.com

www.TheCatalogRoom.com

Tygon LP1100 Low Permeation Fuel Tubing ®

Com Wit patibl h e Etha 100% nol

Performance driven. Environmentally responsible. Designed to Meet New Emission Standards Features • EPA and CARB certified to meet permeation emission standards of 15g/M2/day • Fluoropolymer liner compatible with higher ethanol blend gasoline up to 100% • Robust multi-layer design and construction • Resistant to swelling, hardening and cracking caused by hydrocarbon-based fluids • Highly flexible, easy to install and offers excellent fitting retention • Ozone and UV light resistant • Wide temperature range from -20˚F to 165˚F (-28.9˚C to 73.9°C ) Benefits • Conforms to new government regulatory standards for clean air • Reduces hydrocarbon vapors escaping or permeating into the atmosphere • Protects public health and welfare • Reduces photochemical smog • Promotes cleaner air and reduces air pollution • Greener and environmentally friendlier • High abrasion, cut and tear resistance for longer service life

Applications • Small engine fuel lines • Lawn and garden power equipment • Lubricating oil and grease transfer lines Offers a better alternative to Tygon® F-4040-A Specially designed to meet low perm standards - EPA certification SGN-ENAPNR-0A-03 - CARB executive order Q-09-028

Available in 5 common sizes as stock: - .080" (1.984 mm) ID X .140" (3.572 mm) OD - 3/32" (2.381 mm) ID X 3/16" (4.762 mm) OD - 1/8" (3.175 mm) ID X 1/4" (6.35 mm) OD - 3/16" (4.762 mm) ID X 5/16" (7.937 mm) OD - 1/4" (6.35 mm) ID X 3/8" (9.525 mm) OD

Regulatory size limitations - EPA – .080" (1.984 mm) ID or larger - CARB – 0.187" (4.762 mm) ID ± 0.003" (0.076 mm) or larger Translucent yellow for positive identification and easy flow monitoring

(800) 798-1554 www.tygon.com

FLS-3325-PDF-0711-SGCS

www.eMurdock.com

www.TheCatalogRoom.com

Tygon LP1500 Low Permeation Fuel Tubing ®

Com Wit patible h Etha 10% nol

Performance driven. Environmentally responsible. Designed to Meet New Emission Standards Features • EPA and CARB certified to meet permeation emission standards of 15g/M2/day • Robust multi-layer design with barriers to minimize permeation • Chemical and fuel resistant inner layer • UV resistant outer jacket • Wide temperature range from -40˚F to 185˚F (-40˚C to 85°C ) • Superior clarity and flexibility Benefits • Conforms to new government regulatory standards for clean air • Highly flexible and kink resistant • Clear tubing provides easy observation of fuel flow • Higher temperature rating for heat resistance • Sub-zero cold temperature impact strength • UV resistant outer jacket to prevent premature aging • High abrasion, cut and tear resistance for longer service life • Tight tolerances for better fitting retention and better seal • Compatible with E-10 ethanol blend fuel

Applications • Hand-held lawn and garden power equipment • Small utility, farm and construction equipment • Fluid power pumps and motors • Small engine fuel lines Specially designed to meet low perm standards - EPA certification SGN-ENAPNR-0A-04 - CARB executive 0rder Q-08-034 Allowable emission standard is 15g/M2/day - LP 1500 is less than <6g/M2/day

Available in 4 common sizes as stock - 3/32" (2.381 mm) ID X 3/16" (4.762 mm) OD - 1/8" (3.175 mm) ID X 1/4" (6.35 mm) OD - 1/4" (6.35 mm) ID X 3/8" (9.525 mm) OD - 1/2" (12.7 mm) ID X 3/4" (19.05 mm) OD

Regulatory size limitations - EPA – 3/32" (2.381 mm) ID or larger - CARB – 0.094" (2.381 mm) ID ± 0.003" (0.076 mm) or larger

(800) 798-1554 www.tygon.com

FLS-3326-PDF-0711-SGCS

www.eMurdock.com

www.TheCatalogRoom.com

Tygon LP1600 Low Permeation Fuel Tubing ®

Performance driven. Environmentally responsible.

Com Wit patibl h e Etha 100% nol

Designed to Meet New Marine Market Emission Standards Features • Specifically designed for marine outboard fuel delivery applications • EPA and CARB certified to meet permeation emission standards of 15g/M2/day • Thermoplastic multi-layer technology designed to provide the best barrier construction • Highly fuel resistant and ethanol (E-100) compatible fluoropolymer inner layer • Robust design and construction for safe transfer of fuel from the tank to the engine with a primer bulb • Conforms to SAE J1527 B1 standards • Meets EPA B1-15 and CARB Outdoor Marine Tank (OMT) above-deck ratings for the marine industry • Meets American Boat and Yacht Council (ABYC) H-24 standards • Custom sizes and colors available • Wide temperature range from -20˚F to 165˚F (-28.9˚C to 73.9°C )

Benefits • Conforms to new government regulations for clean air • Superior flexibility and kink resistance • Excellent resistance to hydrocarbon-based fuels (leaded and unleaded fuels) • Compatible with 100% ethanol • Excellent fitting retention while providing easier and faster assembly • Ozone and UV light resistant to prevent premature aging • High abrasion, cut and tear resistance for longer service life Applications • Marine boats with above-deck outboard engines • Personal watercraft – Jet Skis, WaveRunners, etc. • Portable marine fuel delivery systems Specially designed to meet low perm standards: - CARB executive order OMT G-10-030 (outdoor marine tank) - EPA certification SGN-EVAPNR-0A-01 Allowable emission standard is 15g/M2/day: - LP 1600 is less than <6g/M2/day Custom sizes and colors available Custom branding available

(800) 798-1554 www.tygon.com

FLS-3327-PDF-0711-SGCS

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® R-1000 Ultra-Soft Tubing An extremely soft and flexible tubing that offers minimal resistance to compression Tygon® Ultra-Soft Tubing provides unmatched flexibility and drapeability – characteristics beneficial to numerous laboratory set-ups.

Features/Benefits • Ultra-soft and flexible

A Flexible Alternative to Complex Laboratory Set-ups Extremely flexible, Tygon® Ultra-Soft Tubing is the solution to applications requiring maximum drapeability and kink resistance. Even under laboratory set-ups with abrupt radius curves and multiple directional changes, Tygon® Ultra-Soft Tubing resists twisting and collapse — common problems when using other tubing products. Tygon® Ultra-Soft Tubing stays flexible at temperatures as low as -100˚F (-73˚C). Its smooth bore facilitates easy cleaning and helps prevent possible buildup.

The Preferred Tubing in Low-Torque Peristaltic Pumps The extremely low durometer of Tygon® Ultra-Soft Tubing provides minimal resistance to compression. This feature is ideal when using low-torque or battery-driven peristaltic pumps and provides an excellent alternative to silicone tubing where corrosive chemicals are used. Tygon® Ultra-Soft Tubing will typically outlast silicone tubing in peristaltic pump applications by a margin of 2 to 1.

• Performs well at low temperatures (to -100˚F) • Excellent for use in low-torque pump applications • Resistant to a broad range of corrosive chemicals • Meets FDA CFR part 175.3000

Typical Applications • General laboratory • Analytical instruments • Peristaltic pumps • Vent and drain lines

www.eMurdock.com Wall Thickness (inches)

www.TheCatalogRoom.com

Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Length (feet)

Minimum Bend Radius (inches)

Maximum Working Pressure at 73˚F (psi)*

Vacuum Rating, In. of Mercury at 73˚F

AAU00003

1/16

3/16

1/16

1/8

29.9

AAU00007

1/8

1/4

1/16

3/8

29.9

AAU00012

3/16

5/16

1/16

5/8

25.0

AAU00017

1/4

3/8

1/16

13.0

AAU00019

1/4

1/2

1/8

5/8

29.9

AAU00022

5/16

7/16

1/16

1-3/8

9.0

AAU00027

3/8

1/2

1/16

1-3/4

6.0

AAU00029

3/8

5/8

1/8

1-1/8

25.0

AAU00036

1/2

5/8

1/16

2-7/8

3.0

AAU00038

1/2

3/4

1/8

1-3/4

13.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

TYGON® R-1000 Typical Physical Properties Property

ASTM Method

Value or Rating

D2240-02

—

Clear

Tensile Strength, psi (MPa)

D412-98

1,200 (8.3)

Ultimate Elongation, %

D412-98

375

Tear Resistance, lb-f/inch (kN/m)

D1004-94

52 (9)

Specific Gravity

D792-00

1.12

Water Absorption, % 24 hours at 23°C

D570-98

0.30

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hours

D395-01 Method B

Brittleness By Impact Temp., °F (°C)

D746-98

-103 (-75)

—

125 (52)

Dielectric Strength v/mil (kV/mm)

D149-97

500 (19.7)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412-98

330 (2.2)

Tensile Set, %

D412-98

Durometer Hardness Shore A, 15 Sec Color

Maximum Recommended Operating Temperature °F (°C)

TYGON® R-1000 Tubing is not intended for use as an implant material.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS3122-2M-1203-SGCS

www.labpure.com www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® UV Resistant Tubing FORMULATION R-3400 Remains flexible in ultraviolet environments Features/Benefits • Black in color, protects light-sensitive fluids Tygon® UV Resistant Tubing protects light-sensitive fluids while resisting degradation from ozone and ultraviolet light.

• Wide range of chemical resistance • Ozone resistant • Excellent burn resistance

Versatility in Chemical Resistance

• Low compression set; resists permanent deformation

Ideal for virtually any permanent or temporary chemical transfer application, Tygon® UV Resistant Tubing combines suppleness and flexibility with resistance to a wide range of chemicals. It shows exceptional resistance to strong acids and many alkalies.

• Available in clear formulation for fluid flow monitoring

The flexibility of Tygon® UV Resistant Tubing also makes it quick and easy to put into service, providing considerable savings on installation time and cost when compared to rigid piping systems.

Typical Applications • Acid and caustic transfer

Outstanding Weatherability

• Corrosive diffusible gases

Black in color, it is resistant to ultraviolet light, ozone and weathering, making it ideal for many outdoor applications. Standard inventoried sizes of Tygon® UV Resistant Tubing have sufficient wall thickness to block transmission of all UV light.

• Fertilizer and pesticide dispensing

Excellent Burn Resistance Tygon® UV Resistant Tubing will meet UL 94V-0 and UL 94HB flammability ratings. Specifying Tygon® UV Resistant Tubing for use in equipment that requires specific burn characteristics can help to simplify the approval process.

• Electrical insulation lines • Ink and adhesive dispensing • General maintenance

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® R-3400 Inventoried Sizes Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Length (feet)

Minimum Bend Radius

Max. Working Pressure at 73°F (psi) (inches)

Vacuum Rating, In. of Mercury at 73°F

AAE00002

1/16

1/8

1/32

1/4

29.9

AAE00004

3/32

5/32

1/32

3/8

29.9

AAE00005

3/32

7/32

1/16

1/4

29.9

AAE00007

1/8

1/4

1/16

3/8

29.9

AAE00010

5/32

9/32

1/16

1/2

29.9

AAE00011

3/16

1/4

1/32

11.0

AAE00012

3/16

5/16

1/16

5/8

29.9

AAE00013

3/16

3/8

3/32

1/2

29.9

AAE00017

1/4

3/8

1/16

25.0

AAE00018

1/4

7/16

3/32

3/4

29.9

AAE00022

5/16

7/16

1/16

1-3/8

16.0

AAE00027

3/8

1/2

1/16

1-3/4

11.0

AAE00029

3/8

5/8

1/8

1-1/8

29.9

AAE00032

7/16

9/16

1/16

2-1/4

8.0

AAE00038

1/2

3/4

1/8

1-3/4

25.0

AAE00046

5/8

7/8

1/8

2-3/8

16.0

AAE00053

3/4

1/8

3-1/4

11.0

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

TYGON® R-3400 Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec

ASTM Method D2240-02

Black

D412-98

2250 (15.5)

Color Tensile Strength psi (MPa) Ultimate Elongation, %

Value or Rating

D412-98

350

Tear Resistance lb-f/inch (kN/m)

D1004-94

185 (32)

Specific Gravity

D792-00

1.31

Water Absorption, % 24 hrs. @ 23˚C

D570-98

0.19

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

D395-02 Method B

Brittleness By Impact Temp., ˚F (˚C)

D746-98

-6 (-21)

Maximum Recommended Operating Temp., ˚F (˚C)

165 (74)

Dielectric Strength v/mil (kV/mm)

D149-97

490 (19.3)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412-98

1,000 (6.9)

Tensile Set, %

D412-98

TYGON® R-3400 TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® R-3603 Laboratory and Vacuum Tubing Consistent performance for reliable analysis Features/Benefits • Outstanding chemical resistance The most consistently reliable tubing for the transfer of liquids and gases, Tygon® Laboratory Tubing handles virtually all inorganic chemicals found in today’s laboratories.

• Lot-to-lot consistency for reproducible results

Crystal clear and flexible, Tygon® Laboratory Tubing handles virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating.

• Increases productivity in peristaltic pumps – outlasts other clear tubing 2 to 1

Long-lasting and crack-resistant, Tygon® Laboratory Tubing is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup so that cleaning is facilitated. Coils are marked at 3-foot intervals for easy measuring.

• Standard sizes available to hold full vacuum at room temperature

Provides Versatility for Today’s Laboratories

Tygon® Laboratory Tubing may be safely sterilized by coiling loosely in surgical muslin and autoclaving at 15 psi of steam for 30 minutes. Following initial sterilization, a shrinkage of 2%-4% may be noted. However, no further shrinkage should occur with subsequent sterilizations. Due to its excellent chemical resistance, Tygon® Laboratory Tubing may also be sterilized chemically or by gas (ethylene oxide). Coil tubing and wrap loosely in muslin or linen and follow the directions of your sterilization equipment manufacturer. Where aeration equipment such as vacuum and drying is required, follow the recommended times for degassing to ensure against gas retention and to reduce any residual concentration below known safety limits.

• Smooth, polished inner wall • Non-aging and non-oxidizing • Meets FDA CFR part 175.300 criteria

Typical Applications Secure Fitting Attachment Tygon® Laboratory Tubing has a Shore A Durometer of 55, which enables it to be slipped over fittings quickly and easily, and to grip securely. Its ability to bend readily to sharp radius curves speeds and simplifies laboratory set-ups. Tygon® Laboratory Tubing is specially formulated for resistance to flex-fatigue and abrasion. In many peristaltic pump applications, it will outlast its nearest competitor by at least 2 to 1. As a tubing for instrumentation connection, vent, drain, and other general laboratory applications, Tygon® Laboratory Tubing offers superior life, which minimizes the labor and expense of replacement.

Available in Vacuum Tubing Sizes Tygon® Vacuum Tubing has extra heavy walls that will withstand a full vacuum at room temperature (29.9" [759mm] of mercury at 73˚F [23˚C] and up to 27" [686 mm] of mercury at 140˚F [60˚C]). Like standard Tygon® Laboratory Tubing, Tygon® Vacuum Tubing resists most inorganic chemicals and can be used in corrosive atmospheres. Clarity allows monitoring for possible backups, which could result in equipment damage. Tygon® Vacuum Tubing will not swell closed if vacuum pump oil should happen to back into it. Tygon® Vacuum Tubing has a low vapor pressure – less than 3 x 10-2 mm Hg at 140˚F.

• General laboratory • Analytical instruments • Peristaltic and vacuum pumps • Ideal for condensers, incubators, desiccators, gas lines and drain lines

www.eMurdock.com

TYGON® R-3603 Tubing Inventoried Sizes Saint-Gobain Part Number

AAC00001 AAC00002 AAC02002 AAC04002 AAC00003 AAC00004 AAC02004 AAC00005 AAC00006 AAC04006 AAC00007 AAC02007 AAC04007 AAC00009 AAC00010 AAC02010 AAC00011 AAC00012 AAC02012 AAC04012 AAC00013 AAC00014 AAC00016 AAC00017 AAC02017 AAC04017 AAC00018 AAC00019 AAC02019 AAC00022 AAC00023 AAC00024 AAC00025 AAC00027 AAC00028 AAC00029 AAC00032 AAC00033 AAC00034 AAC00036 AAC00037 AAC02037 AAC00038 AAC00039 AAC00041 AAC00042 AAC00045 AAC00046 AAC00047 AAC00050 AAC00053 AAC00054 AAC00055 AAC00057 AAC00059 AAC00060 AAC00062 AAC00064 AAC00065 AAC00068 AAC00069 AAC00070 AAC00071 AAC00073 AAC00074 AAC00076 AAC00078 AAC05078

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

Length (feet)

1/32 1/16 1/16 1/16 1/16 3/32 3/32 3/32 1/8 1/8 1/8 1/8 1/8 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 3/8 3/8 3/8 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 9/16 9/16 5/8 5/8 5/8 11/16 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1-1/8 1-1/4 1-1/4 1-1/4 1-1/2 1-1/2 1-3/4 2 2

3/32 1/8 3/16 3/16 3/16 5/32 5/32 7/32 3/16 3/16 1/4 1/4 1/4 7/32 9/32 9/32 1/4 5/16 5/16 5/16 3/8 7/16 5/16 3/8 3/8 3/8 7/16 1/2 1/2 7/16 1/2 9/16 5/8 1/2 9/16 5/8 9/16 5/8 11/16 5/8 11/16 11/16 3/4 13/16 3/4 13/16 13/16 7/8 15/16 7/8 1 1-1/16 1-1/8 1-1/4 1-1/8 1-3/16 1-1/4 1-3/8 1-1/2 1-1/2 1-1/2 1-5/8 1-3/4 1-7/8 2 2-1/4 2-1/2 2-1/2

1/32 1/32 1/16 1/16 1/16 1/32 1/32 1/16 1/32 1/32 1/16 1/16 1/16 1/32 1/16 1/16 1/32 1/16 1/16 1/16 3/32 1/8 1/32 1/16 1/16 1/16 3/32 1/8 1/8 1/16 3/32 1/8 5/32 1/16 3/32 1/8 1/16 3/32 1/8 1/16 3/32 3/32 1/8 5/32 3/32 1/8 3/32 1/8 5/32 3/32 1/8 5/32 3/16 1/4 1/8 5/32 1/8 3/16 1/4 3/16 1/8 3/16 1/4 3/16 1/4 1/4 1/4 1/4

50 50 100 500 50 50 100 50 50 500 50 100 500 50 50 100 50 50 100 500 50 50 50 50 100 500 50 50 100 50 50 50 50 50 50 50 50 50 50 50 50 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 20

Minimum Bend Radius (inches) 1/8 1/4 1/8 1/8 1/8 3/8 3/8 1/4 1/2 1/2 3/8 3/8 3/8 3/8 1/2 1/2 1 5/8 5/8 5/8 1/2 3/8 1-5/8 1 1 1 3/4 1/2 1/2 1-3/8 1 7/8 3/4 1-1/2 1-3/8 1-1/8 2-1/4 1-3/4 1-3/8 2-7/8 2-1/4 2-1/4 1-1/2 1-1/2 2-1/2 2 3 2-3/8 2 3-1/2 3-1/4 2-3/4 2-3/8 2 4-1/8 3-1/2 4-3/4 4 3 4-1/2 7-7/8 5-1/2 4-3/8 7-1/4 5-7/8 7-1/2 9-3/8 9-3/8

Maximum Working Pressure at 73˚F (psi)* 80 45 45 45 75 30 30 55 25 25 45 45 45 20 35 35 20 30 30 30 40 55 15 25 25 25 35 40 40 20 30 35 45 20 25 30 15 20 25 10 20 20 25 30 15 20 15 20 25 15 18 20 25 30 15 20 15 20 25 18 12 15 20 15 18 16 15 15

www.TheCatalogRoom.com

TYGON® R-3603 Tubing Inventoried Sizes Vacuum Rating, In. of Mercury at 73˚F 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 20 20 29.9 29.9 29.9 12 29.9 29.9 9 29.9 29.9 29.9 29.9 29.9 5 20 20 20 29.9 29.9 29.9 13 29.9 29.9 29.9 9 21 29.9 7 15 28 5 12 12 21 29.9 9 17 7 13 21 6 9 15 21 29.9 7 11 5 12 21 9 3 7 13 5 9 7 5 5

Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

AAC00015 AAC00020 AAC00030 AAC00040 AAC00049 AAC00058 AAC00066 AAC05066

3/16 1/4 3/8 1/2 5/8 3/4 1 1

9/16 5/8 7/8 1-1/8 1-3/8 1-1/2 2 2

3/16 3/16 1/4 5/16 3/8 3/8 1/2 1/2

AACUN007 AACUN012 AACUN017 AACUN019 AACUN027 AACUN036 AACUN053 AACUN062

1/8 3/16 1/4 1/4 3/8 1/2 3/4 1

1/4 5/16 3/8 1/2 1/2 5/8 1 1-1/4

Length (feet)

Minimum Bend Radius (inches)

Maximum Working Pressure at 73˚F (psi)*

Vacuum Rating, In. of Mercury at 73˚F

1/4 1/2 5/8 7/8 1 1-1/2 1-7/8 1-7/8

60 50 50 45 40 35 35 35

29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9

45 30 25 40 20 10 18 15

29.9 29.9 20 29.9 9 5 9 5

Vacuum Sizes 50 50 50 50 50 50 50 20

Unipacs (10/10' lengths per carton) 1/16 1/16 1/16 1/8 1/16 1/16 1/8 1/8

10/10' 10/10' 10/10' 10/10' 10/10' 10/10' 10/10' 10/10'

3/8 5/8 1 1/2 1-1/2 2.7/8 3-1/4 4-3/4

Vacuum Unipacs (10/10' or 4/10' lengths per carton as shown below) AACUN015 AACUN020 AACUN030 AACUN040 AACUN049 AACUN058 AACUN066

3/16 1/4 3/8 1/2 5/8 3/4 1

9/16 5/8 7/8 1-1/8 1-3/8 1-1/2 2

3/16 3/16 1/4 5/16 3/8 3/8 1/2

Saint-Gobain Part Number

I.D. (mm)

O.D. (mm)

Wall Thickness (mm)

AAC1S1502 AAC1S1517 AAC1S1518 AAC1S1503 AAC1S1504 AAC1S1505 AAC1S1506 AAC1S1507

2 3 4 5 6 7 8 10

4 5 6 8 9 10 12 14

1 1 1 1.5 1.5 1.5 2 2

10/10' 10/10' 10/10' 10/10' 10/10' 10/10' 4/10'

1/4 1/2 5/8 7/8 1 1-1/2 1-7/8

60 50 50 45 40 35 35

29.9 29.9 29.9 29.9 29.9 29.9 29.9

Maximum Working Pressure at 73˚F (psi)* 40 30 25 30 25 20 25 20

Vacuum Rating, In. of Mercury at 73˚F 29.9 29.9 21.0 29.9 22.0 15.0 21.0 14.0

Metric Sizes Length Minimum (meters) Bend Radius (mm) 15 7 15 13 15 16 15 19 15 22 15 29 15 29 15 42

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

TYGON® R-3603 Tubing Typical Physical Properties Property

ASTM Method

Durometer Hardness Shore A, 15 Sec

Value or Rating

D2240-02

Clear

Tensile Strength, psi (MPa)

D412-98

1,650 (11.4)

Ultimate Elongation, %

D412-98

450

Tear Resistance, lb-f/inch (kN/m)

D1004-94

125 (22)

Specific Gravity

D792-00

1.18

Water Absorption, % 24 hrs. @ 23˚C

D570-98

0.24 61

Color

Compression Set Constant Deflection, %

D395-01

@ 158˚F (70˚C) for 22 hrs.

Method B

Brittleness By Impact Temp., ˚F (˚C)

D746-98

-58 (-50)

165 (74)

D149-97

608 (23.9)

@ 100% Elongation, psi (MPa)

D412-98

650 (4.5)

Tensile Set, %

D412-98

107

Maximum Recommended Operating Temp., ˚F (˚C) Dielectric Strength, v/mil (kV/mm) Tensile Modulus,

TYGON® Tubing is not intended for use as an implant material.

TYGON® is a registered trademark.

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: 800-798-1554 Tel: (330) 798-9240 Fax: (330) 798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS3123-2M-1203-SGCS

www.labpure.com www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGON® Inert Tubing FORMULATION SE-200

For the ultimate in chemical resistance, purity, flexibility and clarity Features/Benefits • Crystal clarity

Chemically resistant and non-contaminating, Tygon® Inert Tubing provides the outstanding clarity and flexibility of Tygon® tubing combined with the inertness of a fluoropolymer.

Excellent Chemical Resistance

Without sacrificing the flexibility, glass-like clarity and outstanding bend radius for which Tygon® tubing is known, Tygon® Inert Tubing can handle many applications where flexible tubing of the past could not be used. Its FEP inner liner provides the ultimate in chemical resistance and can accommodate a wide variety of fluids from corrosives to MEK-based solvents. The inert liner limits potential of fluid contamination during transfer. Tygon® Inert Tubing will not impart odor or taste, making it well-suited for food and beverage use. Tygon® Inert Tubing combines all the benefits of Tygon® with the inertness of a fluoropolymer, providing superior performance in many applications and industries.

Meets FDA Criteria for Food Contact

Non-toxic, taste-free and odor-free, Tygon® Inert Tubing meets FDA 21 CFR Part 177.1550 Criteria for contact with food products.

• Improved flexibility when compared to rigid fluoropolymer tubings

• Chemically resistant and inert

• Non-contaminating fluid path • Meets FDA criteria for food contact

Typical Applications • Chemical processing

• Pharmaceutical processing and filling

• Paint and solvent production and packaging • Adhesive transfer lines

• Semiconductor processing

• Photographic processing equipment • Beverage dispensing

• Ink and toner feed lines • Fertilizer and pesticide distribution

www.eMurdock.com

www.TheCatalogRoom.com

Tygon® SE-200 Manufactured Sizes and Pressures Saint-Gobain Part I.D. O.D. Number (inches) (inches)

Wall Thickness Length (inches) (feet)

Minimum Bend Radius (inches)

Maximum Working Pressure at 160°F (psi)* at 73°F (psi)*

AJD00002

1/16

1/8

1/32

1/2

100

AJD00007

1/8

1/4

1/16

AJD00012

3/16

5/16

1/16

1-1/2

AJD00017

1/4

3/8

1/16

AJD00028

3/8

9/16

3/32

3-1/2

AJD00038

1/2

3/4

1/8

AJD00053

3/4

1/8

4-1/2

Tygon® SE-200 Typical Physical Properties Property Durometer Hardness Shore A, 15 Sec

Fittings for Tygon® SE-200 Tubing

ASTM Method

Value or Rating

D2240

67*

Color Tensile Strength psi (MPa) Ultimate Elongation, %

Clear

D412

2000 (13.8)

D412

350

Tear Resistance lb-f/inch (kN/m)

D1004

165 (29)

Specific Gravity

D792

1.45

D570

<0.01

Water Absorption, % 24 hrs. @ 23˚C Compression Set Constant Deflection, % @158∞ F (70∞ C) for 22 hrs.

D395 Method B

D746

-40 (-40)

170 (77)

Dielectric Strength v/mil (kV/mm)

D149

620 (24.4)

Tensile Modulus, @ 100% Elongation, psi (MPa) @ 300% Elongation, psi (MPa)

D412

650 (4.5) 1450 (3.1)

Tensile Set, %

D412

Brittleness By Impact Temp., ˚F (˚C) Maximum Recommended Operating Temp., ˚F (˚C)

TYGON® SE-200 TUBING IS NOT TO BE USED IN VACUUM APPLICATIONS

Single barb insert fittings are recommended for use with Tygon® SE-200 tubing. Single barb insert fittings have a land behind the barb that allows a clamp to be fastened over the tubing (see picture below). Note: Please be sure not to over-tighten the clamp as it might result in damage to the tubing. Also: To facilitate entry of the fitting into the tubing, the outside diameter at the end of the tapered fitting must be smaller than the inside diameter.

Tubing wall

Clamp

Single barb insert

*Durometer measured on outer jacket Tygon® is a Saint-Gobain Performance Plastics registered trademark.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

NEW

TYGON® SILVER Antimicrobial Tubing Features/Benefits Colonies formed by viable bacteria after exposure to AlphaSan® treated (left) and untreated (right) polymer.

•

Plasticizer-free inner bore

•

.D. surface can also be O formulated with a silver based compound

•

• • Tygon® Silver Antimicrobial Tubing decreases bacterial growth and provides added value.

Is Your Tubing Protected Against Microbes?

Microorganisms are living cells so small that most can only be seen with a microscope. Microbes are a type of microorganism found everywhere, and include bacteria, fungi and algae. The majority of microbes do not interfere with human activities. However, in some situations they can cause problems. Growth of microbes on many materials can lead to foul odors, discoloration and formation of mildew and biofilm. In the case of tubing, microbes can contaminate the material being transferred as well as degrade the tubing itself.

Leader in Antimicrobial Technology

Saint-Gobain Performance Plastics is the leader in antimicrobial technology. Our custom compounding capabilities allow us to produce antimicrobial versions of many of our tubing products, including Tygon®. Tygon® Silver Antimicrobial Tubing is formulated with a silver based compound on the inner surface at the point of fluid contact; the tubing outer surface can be treated in cases where bacteria buildup on the O.D. is a concern.

Adds Value

Cleaning procedures, such as washing with detergent and hot water, can kill microbes. But this process can be time consuming and costly, and does not provide residual protection against fresh contamination. The additional use of a durable and safe antimicrobial treatment is the best way to provide protection against microbial contamination. Offering your customer this added protection adds value to your product. Tygon® Silver Antimicrobial tubing meets FDA 21 CFR, 177.1520 criteria for food contact applications.

• • •

F ormulated with a silver-based compound on I.D. surface

educes formation of biofilm R and mildew Inhibits growth of microbes Will not discolor

Meets FDA criteria

Meets NSF 51 criteria

Typical Applications •

Food and beverage

•

Water purification

• • • • • •

Ice machines

Water bottle straws Environmental Chemical Dairy Lab

www.eMurdock.com

www.TheCatalogRoom.com

Tygon® Silver Manufactured Sizes and Pressures Saint-Gobain Part I.D. O.D. Number (inches) (inches)

Wall Minimum Thickness Length (feet) (inches)

Minimum Bend Radius (inches)

Max. Working Pressure at 73ºF (psi)*

Vacuum Rating, In. of Mercury at 73ºF

AS600007

1/8

1/4

1/16

1/2

29.9

AS600012

3/16

5/16

1/16

3/4

29.9

AS600017

1/4

3/8

1/16

3/4

29.9

AS600027

3/8

1/2

1/16

1-1/2

25.0

AS600038

1/2

3/4

1/8

1-3/4

29.9

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

Tygon® Silver Typical Physical Properties Property

Durometer Hardness Shore A, 15 Sec Color

ASTM Method

Value or Rating

D2240

Relative Chemical Resistance Properties*

Tubing Acids Bases Salts Alcohols Ketones Conc. Med. Weak Conc. Med. Weak Tygon® Silver

Fluoroelastomers

Urethane

PVC

—

Translucent Silver

Tensile Strength psi (MPa) (at break)

D412

2,300 (15.8)

Ultimate Elongation, %

D412

240

Tear Resistance lb-f/inch (kN/m)

D1004

190 (33.3)

Specific Gravity

D792

1.20

Water Absorption, % 24 hrs. @ 23º C

D570

<0.01

D395 Method B

D746

-47 (-44)

How it Works

—

160 (71)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412

910 (6.3)

Tensile Set, %

D412

AlphaSan®, the antimicrobial polymer compound used by Saint-Gobain, is a zirconium phosphate-based ceramic ion-exchange resin containing silver. Silver is recognized as being safe for human contact and is an integral part of antimicrobial additives that provide the following benefits:

Compression Set Constant Deflection, % @158º F (70º C) for 22 hrs. Brittleness By Impact Temp., ºF (ºC) Maximum Recommended Operating Temp., ºF (ºC)

Thermoplastic Rubber

Neoprene

Nitrile Rubber

Silicone

EVA

E = Excellent F = Fair U = Unsatisfactory *All tests conducted at room temperatures. Refer to the comprehensive Tygon® catalog for an expanded listing of chemical resistance.

Unless otherwise noted, all tests were conducted at room temperature (73º F). Values shown were determined on 0.075" thick extruded strip or 0.075" thick molded ASTM plaques or molded ASTM durometer buttons.

• Inhibitory activity against a wide range of microorganisms, improving contamination control. • Consistent antimicrobial impact through silver ion exchange, not just during cleaning procedures.

• Antimicrobial polymer compound is EPA FIFRA registered for contact with food and drinking water, and also FDA approved for food packaging.

Tygon® is a Saint-Gobain Performance Plastics registered trademark AlphaSan® is a Milliken Chemical registered trademark

Applications Silver is known to be effective against a broad spectrum of microorganisms that cause discoloration, odor, biofouling and other aesthetic problems. Antimicrobial polymer compound can be added to approved materials at varying levels to impart fungistatic, bacteriostatic and algistatic properties to the material and the end-use product. The high temperature stability and low color formation of antimicrobial polymer compounds translate to proven performance in a wide variety of applications.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

NEW

TYGOPRENE® Pump Tubing FORMULATION XL-60 Long life pump tubing for a variety of applications Features/Benefits • DEHP free • Long flex life in peristaltic pumps • Temperature resistant up to 250°F • Low extractables Tygoprene® Pump Tubing provides flexibility and long life in peristaltic pumps.

• Meets FDA and NSF 51 criteria • Alternative to PVC

Superior Performance in Peristaltic Pumps Designed specifically for use in peristaltic pump applications, Tygoprene® Pump Tubing maintains a pump life of over 500 hours. With a durometer hardness of Shore A 60, it is extremely flexible and exhibits superior flex life, reducing downtime due to pump tubing failure (see “Comparative Peristaltic Pump Tubing Life” chart on back of page). Tygoprene® Pump Tubing can be considered an alternative to silicones and PVC when longer pump tubing life is required.

Excellent Physical Properties Tygoprene® Pump Tubing is translucent in color and has excellent chemical resistance to a wide range of fluids, including acids and bases. It also exhibits excellent resistance to ozone, oxygen and sunlight aging. Tygoprene® Pump Tubing remains flexible at -40°F and is temperature resistant up to 250°F. Tygoprene® Pump Tubing complies with FDA 21 CFR, 177.1210 criteria, which are applicable for food contact applications, and is NSF listed under standard 51. It has also passed the UL 94-HB flammability resistance classification.

Low Extractables Tygoprene® Pump Tubing has low extractables, greatly reducing the risk of fluid contamination in applications such as ink transfer. It does not impart taste to fluids being transferred, making it an ideal choice for food and beverage applications.

Typical Applications • Ink transfer • Soap and detergent delivery • Cold or hot beverage transfer and dispensing • Food processing • Laboratory applications requiring long pump life and/or low extractables • General chemical transfer and processing

www.eMurdock.com

www.TheCatalogRoom.com

TYGOPRENE® XL-60 Inventoried Sizes Max. Working Pressure at 73°F (psi)*

Vacuum Rating, In. of Mercury at 73°F

1/2

29.9

1/2

29.9

3/4

29.9

1/16

1-1/2

20.0

1/16

15.0

1/8

2-1/2

29.9

7/8

1/8

20.0

1/8

20.0

Saint-Gobain Part Number

I.D. (inches)

O.D. (inches)

AN800003

1/16

3/16

AN800007

1/8

1/4

AN800012

3/16

5/16

AN800017

1/4

3/8

AN800022

5/16

7/16

AN800027

3/8

1/2

AN800038

1/2

3/4

AN800046

5/8

AN800053

3/4

Wall Thickness (inches)

Length (feet) (inches)

Minimum Bend Radius

1/16

1/16 1/16

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

TYGOPRENE® XL-60 Typical Physical Properties Property

ASTM Method

Durometer Hardness Shore A, 15 Sec

Value or Rating

D2240-03

Translucent

Comparative Peristaltic Pump Tubing Life

Tensile Strength psi (MPa)

D412-98

1,630 (11.2)

Ultimate Elongation, %

D412-98

770

Tear Resistance lb-f/inch (kN/m)

D1004-03

190 (33.3)

Specific Gravity

D792-00

0.90

Water Absorption, % 24 hrs. @ 23˚C

D570-98

0.07

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs.

D395-03 Method B

Brittleness By Impact Temp., ˚F (˚C)

D746-98

-87 (-66)

250 (121)

Dielectric Strength v/mil (kV/mm)

D149-97

550 (21.6)

Tensile Modulus, @ 100% Elongation, psi (MPa)

D412-98

555 (3.83)

Tensile Set, %

D412-98

100

Color

Maximum Recommended Temperature*, ˚F (˚C)

*Values based on static oven test at 0 psi.

Relative Permeability Coefficients Tygoprene® XL-60 Tubing Silicone Tubing

PVC Tubing

60 hours 65 hours

Silicone Tubing

50 hours 75 hours 0 50

Tubing Material

500 hours 500+ hours

Tygoprene® Tubing

500

0 psi back pressure

1000

10 psi back pressure

Relative Chemical Resistance Properties

Carbon Dioxide

Nitrogen

Oxygen

1,116

186

42,800

3,900

8,025

Permeability Coefficient (x10-11) cc • cm / cm2 • s • cmHg Permeability Coefficient = amount of gas (cm3) x tubing wall thickness (cm) 2

surface area of tubing ID (cm ) x time (seconds) x pressure drop across tubing wall (cmHg)

Tubing

Acids

Bases

Conc. Med. Weak Conc. Med. Weak Tygoprene® Tubing

PVC Tubing

Silicone Tubing

E = Excellent G = Good F = Fair U = Unsatisfactory *All tests conducted at room temperature

TYGOPRENE® is a Saint-Gobain Performance Plastics registered trademark.

www.tygon.com

100

200

www.eMurdock.com

www.TheCatalogRoom.com

TYGOTHANE® Precision Polyurethane Tubing FORMULATION C-210-A

For polyurethane applications requiring tight dimensional tolerances Features/Benefits • Consistently tight dimensional tolerances With close dimensional tolerances and outstanding elasticity, Tygothane® Precision Polyurethane Tubing provides worry-free attachment to fittings.

Exceptional Properties

Our rigidly controlled manufacturing process makes Tygothane® Precision Polyurethane Tubing the flexible polyurethane tubing that has consistently tight tolerances from lot to lot. Made of tough ester-based polyurethane, Tygothane® Precision Polyurethane Tubing’s clarity, high tear strength and excellent abrasion resistance make it ideal for many applications, including fuel and lubricant lines, pneumatic lines, abrasive product transfer and cable jacketing. It also offers exceptional resistance to oils, greases, fuels and many chemicals. Able to withstand rugged daily use, Tygothane® Precision Polyurethane Tubing resists weathering and can be safely used in temperatures ranging from -100˚F (-73˚C) to 200˚F (93˚C). It meets FDA 21 CFR, 177.1680 and 177.2600 criteria for food and beverage use and is also available in ether-based and medical-grade formulations.

Excellent Stability Even When Exposed to Oils, Greases and Fuels

While many rubber and plastic materials exhibit resistance to certain solvents, oils and chemicals, Tygothane® tubing will resist a much wider range of substances. Plasticizer extraction leading to embrittlement is one of the most frequent causes of failure when flexible tubings are exposed to harsh chemicals. Tygothane® Precision Polyurethane Tubing is plasticizer-free and remains flexible even when cycled through temperature extremes.

Easy and Secure Attachment to Fittings

Tygothane® Precision Polyurethane Tubing’s precision tolerances and high elasticity provide the user with an easy, worry-free attachment to fittings.

• Excellent abrasion and tear resistance

• Excellent resistance to oils, greases and fuels

• Retains flexibility in sub-zero environments • High tear resistance • Meets FDA criteria

Typical Applications • Food and cosmetic processing

• Abrasive and viscous slurry transfer • Lubrication and degreaser dispensing

• Pellet and powder transfer

• Pneumatic sensory devices

• Instrumentation control lines • Coolant recovery systems

www.eMurdock.com

www.TheCatalogRoom.com

Tygothane® C-210-A Manufactured Sizes and Pressures

Saint-Gobain Wall Part I.D. O.D. Thickness Length Number (inches) (inches) (inches) (feet)

AEM02002 AEM02006 AEM02007 AEM02011 AEM02012 AEM02013 AEM02016 AEM02017 AEM02018 AEM02019 AEM02022 AEM02027 AEM02028 AEM02029 AEM02033 AEM02034 AEM02036 AEM02037 AEM02038 AEM02044 AEM02045 AEM02046 AEM02052 AEM02053 AEM02059** AEM02062

1/16 1/8 1/8 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 7/16 7/16 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 7/8 1

1/8 3/16 1/4 1/4 5/16 3/8 5/16 3/8 7/16 1/2 7/16 1/2 9/16 5/8 5/8 11/16 5/8 11/16 3/4 3/4 13/16 7/8 15/16 1 1-1/8 1-1/4

1/32 1/32 1/16 1/32 1/16 3/32 1/32 1/16 3/32 1/8 1/16 1/16 3/32 1/8 3/32 1/8 1/16 3/32 1/8 1/16 3/32 1/8 3/32 1/8 1/8 1/8

100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100

Minimum Max. Working Vacuum Rating, Bend Pressure In. of Mercury at 175°F at 73°F at 175°F Radius at 73°F (inches) (psi)* (psi)* 3/16 1/2 5/16 1 5/8 7/16 1-9/16 15/16 11/16 9/16 1-15/16 1-3/4 1-5/16 1-1/16 1-11/16 1-3/8 2-7/8 2-1/8 1-3/4 4-1/8 3 2-3/8 4 3-1/4 4-1/8 5-1/8

70 45 74 34 56 70 28 42 58 70 36 34 45 54 40 49 26 36 46 24 32 38 26 33 30 28

40 25 45 19 33 44 12 25 28 45 22 19 27 33 21 29 14 18 27 11 16 21 13 20 18 14

29.9 29.9 29.9 29.9 29.9 29.9 20.0 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 29.9 20.0 29.9 29.9 10.0 29.9 29.9 15.0 29.9 29.9 15.0

29.9 29.9 29.9 20.0 29.9 29.9 5.0 29.9 29.9 29.9 29.9 25.0 29.9 29.9 29.9 29.9 5.0 29.9 29.9 5.0 15.0 29.9 5.0 25.0 20.0 10.0

* Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599. ** Made to order, minimums will apply. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Tygothane® C-210-A Typical Physical Properties Property Durometer Hardness Shore A, 1 Sec Color

Tensile Strength psi (MPa) Ultimate Elongation, %

ASTM Method D2240

Value or Rating 82

Transparent Natural

D412

500

D412

6,050 (41.7)

Tear Resistance lb-f/inch (kN/m)

D1004 D624 Die C

475 (83.1) 400 (70)

Water Absorption, % 24 hrs. @ 23˚C

D570

1.12

Specific Gravity

Compression Set Constant Deflection, % @ 158˚F (70˚C) for 22 hrs. Brittleness By Impact Temp., ˚F (˚C)

Maximum Recommended Operating Temp., ˚F (˚C) Intermittent Prolonged Dielectric Strength v/mil (kV/mm)

Tensile Modulus, @ 100% Elongation, psi (MPa) @ 300% Elongation, psi (MPa) Tensile Set, %

D792

1.20

D395 Method B

D746 -

D149 D412 D412

TYGOTHANE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

-100 (-73) 200 (93) 175 (79)

330 (12.9) 800 (5.5) 1,500 (10.4) 98

Tygothane® is a Saint-Gobain Performance Plastics registered trademark.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

TYGOTHANE® Formulation C-544-A I.B. Precision Polyurethane Pressure Tubing Features/Benefits • Exceptional abrasion and tear resistance

• Tough braid reinforcement for elevated working pressures The excellent wear properties of Tygothane® Pressure Tubing make it ideal for use in physically demanding environments.

Designed and Constructed to Optimize Performance

Specially formulated from tough ether-based polyurethane resins, Tygothane® Pressure Tubing is ideal for use in some of the most physically demanding applications. When exposed to abrasive conditions, the excellent wear properties of Tygothane® tubing frequently outperform traditional rubber, plastic and metal materials. More flexible than many other reinforced urethane tubings, Tygothane® tubing can often be used in applications requiring a tight bend radius where other tubings have collapsed and failed. Tygothane® Pressure Tubing also retains much of its unique flexibility even at temperatures as low as -100˚F (-73˚C). Tygothane® Pressure tubing meets FDA 21 CFR, 177.1680 and 177.2600 criteria for food contact applications.

Excellent Stability

While many rubber and plastic materials exhibit resistance to certain solvents, oils and chemicals, Tygothane® tubing will resist a much wider range of substances. Plasticizer extraction leading to embrittlement is one of the most frequent causes of failure when flexible tubings are exposed to harsh chemicals. Tygothane® Pressure Tubing is plasticizer-free and remains flexible even when cycled through temperature extremes.

Large Bore Stock Sizes Ideal for Bulk Transfer

Reinforced for elevated pressure, Tygothane® Pressure Tubing can easily handle applications requiring large volume transfer of high viscosity fluids, pastes and slurries. It is conveniently available from inventory in a wide variety of common sizes up to 2" inner diameter.

• Excellent resistance to oils, greases and fuels • Retains flexibility in sub-zero environments • Meets FDA criteria for food contact

• Meets NSF 61 criteria for potable water contact*

Typical Applications • Food and cosmetic processing

• Abrasive and viscous slurry transfer

• Lubrication and degreaser dispensing

• Pellet and powder transfer

• Pneumatic sensory devices

• Instrumentation control lines • Coolant recovery systems

*NSF has length restrictions, determined by tubing size, for NSF 61 applications.

www.eMurdock.com

www.TheCatalogRoom.com

Tygothane® C-544-A I.B. Manufactured Sizes and Pressures

Saint-Gobain Wall Part I.D. O.D. Thickness Length Number (inches) (inches) (inches) (feet)

Minimum Max. Working Vacuum Rating, Bend Pressure In. of Mercury at 180°F at 73°F at 180°F Radius at 73°F (inches) (psi)* (psi)*

AZY02008

1/8

3/8

1/8

100

1/4

420

220

29.9

AZY02014**

3/16

7/16

1/8

100

1/2

240

125

29.9

29.9 29.9

AZY02019

1/4

1/2

1/8

100

3/4

275

150

29.9

AZY02029

3/8

5/8

1/8

100

1-1/2

205

115

29.9

AZY02038

1/2

3/4

1/8

100

195

110

29.9

AZY02046

5/8

7/8

1/8

100

175

105

29.9

25.0

AZY02054

3/4

1-1/16

5/32

100

3-1/2

150

100

29.9

25.0

AZY02064

1-3/8

3/16

100

4-3/4

120

29.9

15.0 20.0

AZY00071

1-1/4

1-3/4

1/4

29.9

AZY00074

1-1/2

1/4

7-1/2

29.9

15.0

AZY00078

2-1/2

1/4

15.0

10.0

* Working pressures are calculated at a 1:4 ratio relative to burst pressure using ASTM D1599. ** Made to order, minimums will apply. The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Tygothane® C-544-A I.B. Typical Physical Properties Property Durometer Hardness Shore A, 1 Sec Color

ASTM Method

Value or Rating

D2240

—

Clear

Tensile Strength psi (MPa)

D412

5,000 (34.5)

Ultimate Elongation, %

D412

400

Tear Resistance lb-f/inch (kN/m)

D1004

350 (61.3)

Specific Gravity

D792

1.12

Water Absorption, % 24 hrs. @ 23°C

D570

1.80

D395 Method B

Brittleness By Impact Temp., °F (°C)

D746

-100 (-73)

Maximum Recommended Operating Temp., °F (°C)

—

180 (82)

Dielectric Strength, v/mil (kV/mm)

D149

550 (21.6)

Tensile Modulus, psi (MPa) @ 100% Elongation @ 300% Elongation

D412

800 (5.5) 1,200 (8.3)

Tensile Set, %

D412

Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs.

TYGOTHANE® TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Tygothane® is a registered trademark.

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

VENDFLOW® NEW

Taste Barrier Tubing Formulation E-70-V-CE Features/Benefits • Plasticizer free fluid pathway • No taste • Smooth inner surface • Extremely low absorption rate • Custom colors, sizes and lengths • High clarity • Meets FDA requirements for food contact • Hydrophobic inner surface reduces taste transfer

Saint-Gobain Performance Plastic’s new Vendflow® E-70-V-CE is specially made for water and beverage transfer applications with strict taste requirements.

Non-plasticized inner bore yields no taste Vendflow® E-70-V-CE is specifically formulated to transfer water and beverages without imparting any “plastic” taste sometimes found in PVC tubing. It is produced with a smooth, plasticizer free, hydrophobic inner surface to help maintain fluid purity. In addition, it meets FDA requirements for food contact, ensuring the safety of the user.

Great Performance Vendflow® E-70-V-CE is made by the leading manufacturer of specialty tubing for the food and beverage industries. It’s exceptionally flexible, allowing for tight bends and easy installation on dispensing units. Its special construction will ensure a long tubing life, lessening the need for constant replacement.

Vendflow® E-70-V-CE can be custom made to meet any specification Vendflow® can be produced in a variety of sizes and lengths. Color matches or samples are available upon request. Our in-house compounding capabilities allow us to produce Vendflow® E-70-V-CE in many hardnesses and a variety of colors, either opaque or translucent. Its clarity allows for easy flow-monitoring.

www.eMurdock.com

www.TheCatalogRoom.com

Typical physical properties Vendflow® E-70-V-CE Property Durometer Hardness (Shore A), 15s Tensile Strength, psi (MPa) Ultimate Elongation, % Brittle Temperature, ˚F (˚C) Specific Gravity Water Absorption, % 24 hrs at 73˚F (23˚C)(liner material) Maximum Recommended Operating Temperature ˚F (˚C)

ASTM Method D2240-00 D412-98 D412-98 D746-98 D792-00 D570-98 ––

Color

––

Value or Rating 72 +/-5 2300 (15.8) 240 -47 (-44) 1.2 <0.01 160 (71) Clear

Burst Pressure, psi @ 73˚F (23˚C) 1/4" ID X 3/8" OD 5/16" ID X 7/16" OD

ASTM Method D1599 D1599

Bend Radius 1/4" ID X 3/8" OD 5/16" ID X 7/16" OD

Value or Rating 205 200

Rating (inch) 3/4 1.0

Product Characteristics Opacity FDA Approved for Food Contact

Clear Yes

Vendflow® is a registered trademark.

Quotations for tubing and profiles available upon request

Saint-Gobain Performance Plastics 2664 Gilchrist Road Akron, OH 44305 Tel: (330) 798-9240 Toll Free: (800) 798-1554 Fax: (330) 798-6968 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics Corporation tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. LIMITED WARRANTY: For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS-????-?M-0402-SGCS

www.tygon.com

www.eMurdock.com

www.TheCatalogRoom.com

VERSILIC™ SPX-50 High Strength Silicone Tubing biopharmaceutical products

High-strength silicone tubing ideal for veterinary, medical and pharmaceutical applications

Features/Benefits • Provides Resiliency, Long Life and Durability Versilic™ tubing, produced from a proprietary combination of silicone elastomers, provides durability and versatility in a range of applications.

• Ultra-Smooth Inner Bore Reduces Risk of Particulate Entrapment

Designed for Demanding Requirements

• Taste and Odor Free

™

Peroxide-cured Versilic Silicone Tubing Formulation SPX-50 is designed for use in applications where flexibility, resiliency and durability are required. Produced from a proprietary combination of silicone elastomers, Versilic Silicone Tubing optimizes critical physical properties such as tensile strength, elongation and compression set, resulting in a more physically durable product. Its smooth inner surface reduces the risk of particulate entrapment and microscopic buildup during fluid transfer.

Consistently Reliable Results Every lot of raw material used in the manufacture of Versilic Silicone Tubing undergoes a series of in-house physical property testing before use. This stringent evaluation of ingredients helps to provide the repeatable quality found in every foot of Versilic Silicone Tubing. Annual testing on actual tubing samples is performed for reaffirmation of adherence to USP Class VI Criteria. Heavy metals extraction analysis, as well as, cytotoxicity testing is performed to confirm the tubing’s biocompatibility.

• Withstands Temperature Extremes From -75°F to 350°F • Meets USP Class VI and FDA Criteria

Typical Applications • Veterinary Pharmaceuticals • Respiratory and Anesthesia Equipment • Sterile Filling and Processing

Complies with Regulatory Guidelines

• Analytical Instrumentation

Versilic Silicone Tubing complies fully with the requirements of the USP Class VI Criteria and is entirely non-toxic, non-hemolytic and non-pyrogenic. It also meets 3-A Sanitary Standards, FDA 21 CFR Part 177.2600 Criteria and NSF 51 Standard.

• Cosmetic Production

Saint-Gobain Performance Plastics: The Leader in Silicone Tubing Innovation Versilic Silicone Tubing provides versatility in use for a broad range of applications. However, for situations requiring uniquely engineered properties, Saint-Gobain Performance Plastics can design a formulation suited to meet your specific needs. Specialty formulations may be designed to provide a combination of features, including ultra-high temperature resistance, electrical conductivity, closed cell sponge, pigmented colors and long flexural life.

• Environmental Remediation • Beverage Dispensing • Food and Dairy Processing • Appliance Manufacturing • Electronic Equipment

www.eMurdock.com

www.TheCatalogRoom.com

VERSILIC™ SPX-50 Silicone Tubing Manufactured Sizes and Pressures Part Number

I.D. (inches)

O.D. (inches)

Wall Thickness (inches)

ABX00001 ABX00002 ABX00003 ABX00004 ABX00005 ABX00006 ABX00007 ABX00009 ABX00011 ABX00012 ABX00013 ABX00014 ABX00016 ABX00017 ABX00018 ABX00019 ABX00022 ABX00023 ABX00024 ABX00027 ABX00028 ABX00029 ABX00033 ABX00036 ABX00037 ABX00038 ABX00045 ABX00046 ABX00053 ABX42062 ABX42069 ABX42074

1/32 1/16 1/16 3/32 3/32 1/8 1/8 5/32 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 7/16 1/2 1/2 1/2 5/8 5/8 3/4 1 1-1/4 1-1/2

3/32 1/8 3/16 5/32 7/32 3/16 1/4 7/32 1/4 5/16 3/8 7/16 5/16 3/8 7/16 1/2 7/16 1/2 9/16 1/2 9/16 5/8 5/8 5/8 11/16 3/4 13/16 7/8 1 1-1/4 1-1/2 2

1/32 1/32 1/16 1/32 1/16 1/32 1/16 1/32 1/32 1/16 3/32 1/8 1/32 1/16 3/32 1/8 1/16 3/32 1/8 1/16 3/32 1/8 3/32 1/16 3/32 1/8 3/32 1/8 1/8 1/8 1/8 1/4

VERSILIC™ Silicone Tubing Typical Physical Properties

Length (feet)

Minimum Bend Radius (inches)

50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25

1/8 1/4 1/4 1/4 1/4 3/8 1/2 3/4 1 1/2 3/8 3/8 1-1/2 3/4 5/8 5/8 1-1/4 5/8 3/4 1-1/2 1 1 1-3/4 3 1-3/4 1-1/2 3 2-1/2 2-1/2 5 6 7

Max. Working Pressure at 73°F at 320°F (psi) * (psi)*

22 14 22 11 18 9 14 7 7 11 14 18 5 9 12 14 7 10 7 9 11 6 8 5 7 9 6 7 7 5 5 6

21 13 21 10 16 8 13 6 6 10 13 16 4 8 11 13 6 9 6 8 10 5 7 4 6 8 5 6 6 4 4 5

Property

Durometer Hardness Shore A, 15 Sec Color Tensile Strength psi (MPa) Ultimate Elongation, % Tear Resistance lb-f/inch (kN/m) Specific Gravity Water Absorption, % 24 hrs. @ 23°C Compression Set Constant Deflection, % @ 158°F (70°C) for 22 hrs. @ 347°F (175°C) for 22 hrs. Brittleness by Impact Temp., °F (°C) Maximum Recommended Operating Temp.,°F (°C)

Dielectric Strength v/mil (kV/mm) Tensile Modulus, @ 200% Elongation, psi (MPa)

ASTM Method

Value or Rating

D2240-91

— D412-92

Translucent 1,500 (10.3)

D412-92 D624-91 Die B D792-91 D570-81

450 148 (26) 1.17 0.06

D395-89 Method B

D746-79 —

D149-93 D412-92

10 33 -112 (-80) 350 (177) Continuous 400 (204) Intermittent 480 (19) 425 (2.9)

VERSILIC™ Tubing Sterilization Methods Autoclavable in steam Gas — Ethylene Oxide Radiation — Gamma or E-Beam

*Working pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use. Versilic™ is a trademark.

biopharmaceutical products Come through clean.

VERSILIC SILICONE TUBING IS NOT INTENDED FOR USE AS AN IMPLANT MATERIAL

Saint-Gobain Performance Plastics 3910 Industrial Drive Beaverton, MI 48612 Tel: (989) 435-9533 Tel: (888) 387-0067 Fax: (989) 435-2355 IMPORTANT: It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use, misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. Saint-Gobain Performance Plastics Corporation assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer's risk. FLS-3093-1.5M-0403-SGCS

www.biopharm.saint-gobain.com

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: Norprene A-60-F-IB

Manufacturers Name: Saint-Gobain Performance Plastics Address: 2664 Gilchrist Rd. Akron, Ohio 44305

Emergency Telephone Number: Call ChemTel: 1-800-255-3924 USA 1-813-248-0585 International Date Prepared: 4/17/08

SECTION 1 - IDENTITY 1.1 1.2 1.3 1.4

Common Name (used on label): Chemical Name...........................: Chemical Family.........................: Formula.......................................:

Norprene A-60-F-IB (Innerbraid) N/A Thermoplastic Rubber The specific chemical identity of the ingredients is considered a trade secret.

SECTION 2 - HAZARDOUS INGREDIENTS 2.1 Principal Hazardous Component(s) (Chemical & Common Names) Limit Value 2.2 Principal Non-Hazardous Component(s) (Chemical & Common Names) Limit Value a. Thermoplastic rubber

Threshold N/A Threshold N/A

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS (Fire & Explosion Data) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9

Boiling Point..............................: Specific Gravity (H2O=1).........: Vapor Pressure..........................: Percent Volatile by Volume......: Vapor Density (Air=1)..............: Evaporation Rate.......................: Solubility in Water....................: Melting Point.............................: Appearance and Odor...............: 3.10 Flash Point................................: Form #N0123.1

N/A 0.98 N/A N/A N/A N/A Insoluble N/A Natural color innerbraid tubing; Slight odor. >650°F (343°C)

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 1 of 4

www.eMurdock.com

www.TheCatalogRoom.com

MATERIAL SAFETY DATA SHEET

Product: Norprene A-60-F-IB

3.11 Flammable Limits in Air by Volume.................................: 3.12 Auto-Ignition Temperature..:

Lower: N/A N/A

3.13 Extinguisher Media...............: media. 3.14 Special Fire Fighting Procedures: 3.15 Unusual Fire & Explosion Hazards...............................:

Upper: N/A

Water spray or Class A extinguishing Fire fighters should wear full protective clothing including a self-contained breathing apparatus. None Known

SECTION 4 - PHYSICAL HAZARDS 4.1 Stability....................................: Stable: X Unstable: Conditions to Avoid...............: Keep away from strong oxidizers. 4.2 Incompatibility........................: May react with strong oxidizing agents. 4.3 Hazardous Decomposition Products..............................: Smoke, CO, and possibly hydrocarbons may evolve when temperature exceeds 260°C or when ignited. 4.4 Hazardous Polymerization....: May Occur: Will Not Occur: X Conditions to Avoid...............: None Known SECTION 5 - HEALTH HAZARDS 5.1 Threshold Limit Value...........: 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....:

N/E

Toxicological testing has not been conducted with this material. Route of Entry: Eye Contact: No toxic effects are expected. Skin Contact: No toxic effects are expected. Inhalation: Not expected in industrial use. Ingestion: Not expected in industrial use. 2. Chronic Overexposure..: None Known

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 2 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: Norprene A-60-F-IB

5.3 Medical Conditions Generally Aggravated by Exposure...: There are no data available which address medical conditions which are generally recognized as being aggravated by exposure to this product. 5.4 Chemical Listed as Carcinogen or Potential Carcinogen..........: National Toxicology Program: Yes: No: X I.A.R.C. Monographs: Yes: No: X OSHA: Yes: No: X 5.5 OSHA Permissible Exposure Limit....................................: N/A 5.6 ACGIH Threshold Limit Value: N/E 5.7 Other Exposure Limit Used...: Unknown 5.8 Emergency & First-Aid Procedures..........................: Inhalation: N/A Eyes: N/A Skin: N/A Ingestion: N/A SECTION 6 - SPECIAL PROTECTION INFORMATION 6.1 Respiratory Protection............: See Section 4. 6.2 Ventilation...............................:

6.3 Protective Gloves....................: 6.4 Eye Protection.........................: 6.5 Other Protective Clothing or Equipment......................: Form #N0123.1

N/R unless temperature exceeds 260°C Local Exhaust: Mechanical-General: Mechanical-Special: Mechanical-Other: N/R N/R

N/R N/R N/R N/R

Not Necessary

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 3 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: NorpreneďŁ¨ A-60-F-IB

SECTION 7 - SPECIAL PRECAUTIONS AND SPILL/LEAK 7.1 Precautions to be taken in Handling & Storage...........: hygiene and safety practices. 7.2 Other Precautions...................: 7.3 Steps to be Taken in Case Material is Released or Spilled.........: 7.4 Waste Disposal Methods........:

PROCEDURES

Handle in accordance with good industrial N/A N/A According to Local, State and Federal Regulations.

SECTION 8 - OTHER INFORMATION 8.1 Transportation Information...:

DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A

8.2 The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof; however, Saint-Gobain Performance Plastics Corporation makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof.

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 4 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: Norprene A-60-F

Manufacturers Name: Saint-Gobain Performance Plastics Address: 2664 Gilchrist Rd. Akron, Ohio 44305

Emergency Telephone Number: Call ChemTel: 1-800-255-3924 USA 1-813-248-0585 International Date Prepared: 9/26/06

SECTION 1 - IDENTITY 1.1 1.2 1.3 1.4

Common Name (used on label): Norprene A-60-F Chemical Name...........................: N/A Chemical Family.........................: Thermoplastic Rubber Formula.......................................: The specific chemical identity of the ingredients is considered a trade secret.

Threshold N/A

Threshold

N/A

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS (Fire & Explosion Data) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9

MATERIAL SAFETY DATA SHEET

N/A 0.98 N/A N/A N/A N/A Insoluble N/A Natural color tubing; Slight odor. >650°F (343°C)

Product: Norprene A-60-F

3.11 Flammable Limits in Air by N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 1 of 4

www.eMurdock.com

Volume.................................: 3.12 Auto-Ignition Temperature..: 3.13 Extinguisher Media...............: media. 3.14 Special Fire Fighting Procedures: 3.15 Unusual Fire & Explosion Hazards...............................:

www.TheCatalogRoom.com

Lower: N/A N/A

Upper: N/A

Water spray or Class A extinguishing Fire fighters should wear full protective clothing including a self-contained breathing apparatus. None Known

SECTION 4 - PHYSICAL HAZARDS 4.1 Stability....................................: Conditions to Avoid...............: 4.2 Incompatibility........................: 4.3 Hazardous Decomposition Products..............................: may evolve

Stable: X Unstable: Keep away from strong oxidizers. May react with strong oxidizing agents. Smoke, CO, and possibly hydrocarbons when temperature exceeds 260째C or when

ignited. 4.4 Hazardous Polymerization....: Conditions to Avoid...............:

May Occur: Will Not Occur: X None Known

SECTION 5 - HEALTH HAZARDS 5.1 Threshold Limit Value...........: 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....:

N/E

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 2 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: Norprene A-60-F

6.3 Protective Gloves....................: 6.4 Eye Protection.........................: 6.5 Other Protective Clothing or Equipment......................: Form #N0123.1

N/R unless temperature exceeds 260°C Section 4. Local Exhaust: Mechanical-General: N/R Mechanical-Special: N/R Mechanical-Other: N/R N/R N/R

N/R

Not Necessary

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 3 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: NorpreneďŁ¨ A-60-F

SECTION 7 - SPECIAL PRECAUTIONS AND SPILL/LEAK 7.1 Precautions to be taken in Handling & Storage...........: hygiene 7.2 Other Precautions...................: 7.3 Steps to be Taken in Case Material is Released or Spilled.........: 7.4 Waste Disposal Methods........:

PROCEDURES

Handle in accordance with good industrial and safety practices. N/A N/A According to Local, State and Federal Regulations.

SECTION 8 - OTHER INFORMATION 8.1 Transportation Information...:

DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 4 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product: Norprene A-60-G

Manufacturers Name: Saint-Gobain Performance Plastics Address: 2664 Gilchrist Rd. Akron, Ohio 44305

Emergency Telephone Number: Call ChemTel: 1-800-255-3924 USA 1-813-248-0585 International Date Prepared: 9/26/06

SECTION 1 - IDENTITY 1.1 1.2 1.3 1.4

Common Name (used on label): Norprene A-60-G Chemical Name...........................: N/A Chemical Family.........................: Thermoplastic Rubber Formula.......................................: The specific chemical identity of the ingredients is considered a trade secret.

SECTION 2 - HAZARDOUS INGREDIENTS 2.1 Principal Hazardous Component(s) (Chemical & Common Names) Threshold Limit Value 2.2 Principal Non-Hazardous Component(s) (Chemical & Common Names) Limit Value a. Thermoplastic Rubber (TPR)

N/A Threshold N/A

SECTION 3 - PHYSICAL & CHEMICAL CHARACTERISTICS (Fire & Explosion Data) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9

N/A 0.98 N/A N/A N/A N/A Negligible N/A Black tubing, Slight odor. >650°F (343°C)

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 1 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET 3.11 Flammable Limits in Air by Volume.................................: 3.12 Auto-Ignition Temperature..: 3.13 Extinguisher Media...............: media. 3.14 Special Fire Fighting Procedures:

www.TheCatalogRoom.com

Product: Norprene A-60-G

Lower: N/A Upper: N/A N/A Water spray or Class A extinguishing Fire fighters should wear full protective clothing including a self-contained breathing apparatus.

3.15 Unusual Fire & Explosion Hazards...............................:

None Known

SECTION 4 - PHYSICAL HAZARDS 4.1 Stability....................................: Conditions to Avoid...............: chemicals. 4.2 Incompatibility........................: 4.3 Hazardous Decomposition Products..............................: may evolve

Stable: X Unstable: Keep away from strong oxidizing May react with strong oxidizers. Smoke, CO, and possibly hydrocarbons when temperature exceeds 260°C or when

ignited. 4.4 Hazardous Polymerization....: Conditions to Avoid...............:

May Occur: Will Not Occur: X None Known

SECTION 5 - HEALTH HAZARDS 5.1 Threshold Limit Value...........: 5.2 Sign & Symptoms of Exposure: 1. Acute Overexposure.....:

N/E

Toxicological testing has not been conducted with this material. Route of Entry: Eye Contact: N/A Skin Contact:. N/A Inhalation:. N/A Ingestion:. N/A 2. Chronic Overexposure..: None Known

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 2 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product:

NorpreneďŁ¨ A-60-G

5.3 Medical Conditions Generally Aggravated by Exposure...: There are no data available which address medical conditions which are generally recognized as being aggravated by exposure to this product. 5.4 Chemical Listed as Carcinogen or Potential Carcinogen..........: National Toxicology Program: Yes: No: X I.A.R.C. Monographs: Yes: No: X OSHA: Yes: No: X 5.5 OSHA Permissible Exposure Limit....................................: N/E 5.6 ACGIH Threshold Limit Value: N/E 5.7 Other Exposure Limit Used...: Unknown 5.8 Emergency & First-Aid Procedures..........................: Inhalation: N/A Eyes:. N/A Skin: N/A Ingestion: N/A SECTION 6 - SPECIAL PROTECTION INFORMATION 6.1 Respiratory Protection............: 6.2 Ventilation...............................:

6.3 Protective Gloves....................: 6.4 Eye Protection.........................: 6.5 Other Protective Clothing or Equipment......................: Form #N0123.1

N/R Local Exhaust: Mechanical-General: N/R Mechanical-Special: N/R Mechanical-Other: N/R N/R N/R

N/R

Not Necessary

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 3 of 4

www.eMurdock.com

MATERIAL SAFETY DATA SHEET

www.TheCatalogRoom.com

Product:

NorpreneďŁ¨ A-60-G

SECTION 7 - SPECIAL PRECAUTIONS AND SPILL/LEAK 7.1 Precautions to be taken in Handling & Storage...........: 7.2 Other Precautions...................: 7.3 Steps to be Taken in Case Material is Released or Spilled.........: 7.4 Waste Disposal Methods........:

PROCEDURES

Store cool and dry. N/A N/A According to Local, State and Federal Regulations.

SECTION 8 - OTHER INFORMATION 8.1 Transportation Information...:

DOT Shipping Name: N/A DOT Hazard Class: N/A DOT Label(s): N/A UN/NA Number: N/A Placards: None IATA: N/A IMO IMDG-Code: N/A European Class: RID (OCTI): N/A ADR (ECE): N/A RAR (IATA): N/A

8.2 The information and recommendations set forth herein are taken from sources believed to be accurate as of the date hereof, however, Saint-Gobain Performance Plastics Corporation makes no warranty with respect to the accuracy of the information or the suitability of the recommendations, and assumes no liability to any user thereof.

Form #N0123.1

N/E = Not Established, N/A = Not Applicable, N/R = Not Required, N/D = Not Determined Page 4 of 4

www.eMurdock.com

www.TheCatalogRoom.com

www.eMurdock.com

www.TheCatalogRoom.com

www.eMurdock.com

www.TheCatalogRoom.com

www.eMurdock.com

www.TheCatalogRoom.com

www.eMurdock.com

www.TheCatalogRoom.com

DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE Certificate No. 103980-2011-AQ-USA-RvA Certificate No. 104200-2011-AE-USA-RvA This is to certify that

Saint-Gobain NorPro at 1500 Independence Avenue, Bryan TX 77803 USA Additional Locations: Site Address

Site City

Site State

Site Main Activities

216 Igou Ferry Road

Soddy Daisy

TN 37379

Manufacturing

5300 Gerber Road

Fort Smith

AR 72904

Manufacturing

3840 Fishcreek Road

Stow

OH 44224

Management, Purchasing, Sales and R&D

has been found to conform to the Management System Standard:

ISO 9001:2008 / ISO 14001:2004 This Certificate is valid for the following product or service ranges:

THE DESIGN, DEVELOPMENT, MANUFACTURE AND SALE OF INDUSTRIAL CERAMICS Initial Certification date:

Place and date:

October 05, 2011

Houston, Texas, October 05, 2011 for the Accredited Unit:

This Certificate is valid until:

October 05, 2014

DNV CERTIFICATION B.V., THE NETHERLANDS

The audit has been performed under the supervision of

Bob Faust

Chandran Ilango

Lead Auditor

Management Representative

Lack of fulfillment of conditions as set out in the Certification Agreement may render this Certificate invalid. DET NORSKE VERITAS CERTIFICATION B.V. ZWOLSEWEG 1, 2994 LB BARENDRECHT, THE NETHERLANDS, TEL: +31 10 2922 688 - WWW.DNVBA.COM