Progressive Crop Consultant - January/February 2021

January / February 2021 Managing Soil Structure and Quality

Soil Application of Fungicides in Strawberry

Alternative Nematicides for Root-Knot Nematodes in Melons

Weather Station Use in Vineyards

Volume 6: Issue 1

PUBLISHER: Jason Scott Email: jason@jcsmarketinginc.com EDITOR: Marni Katz ASSOCIATE EDITOR: Cecilia Parsons Email: article@jcsmarketinginc.com PRODUCTION: design@jcsmarketinginc.com Phone: 559.352.4456 Fax: 559.472.3113 Web: www.progressivecrop.com

IN THIS ISSUE

4

Managing Soil Structure and Quality

10

Soil Application of Fungicides in Strawberry

CONTRIBUTING WRITERS & INDUSTRY SUPPORT Kris Beal

Vineyard Team

Surendra Dara

16

Alternative Nematicides for Root-Knot Nematodes in Melons

4

28

Matthew Fidelibus

UCCE Viticulture Specialist

20

UCCE Entomology and Biologicals Advisor, San Luis Obispo and Santa Barbara Counties

Kevin Day

34 38

Pierce’s Disease in Grapevine

Technical Viticulturist, SunMaid Growers

Dr. Karl Wyant

UC COOPERATIVE EXTENSION ADVISORY BOARD Surendra Dara

Making Nitrogen and Potassium Fertilizer Decisions in Vineyards

Stephen Vasquez

Vice President of Ag Science, Heliae Agriculture, UCCE Area Viticulture Advisor Board of Directors, Western Region Certified Crop Craig Macmillan Advisers Ph.D., Macmillan Ag Consulting George Zhuang UCCE Viticulture Farm Jaspreet Sidhu Advisor, Fresno County UCCE Vegetable Crops Farm Advisor, Kern County

Weather Station Use in Vineyards

Dormant Season Yield and Disease Management

UCCE Viticulture Farm Advisor

Karl T. Lund

VINEYARD REVIEW

20

UCCE Entomology and Biologicals Advisor

Gabriel Torres

Steven Koike Tri-Cal Diagnostics

Jhalendra Rijal UCCE Integrated Pest Management Advisor, Stanislaus County

UCCE Pomology Farm Advisor, Tulare and Kings Counties Kris Tollerup UCCE Integrated Pest Management Advisor, Fresno, CA Elizabeth Fichtner UCCE Farm Advisor, Mohammad Yaghmour Tulare County UCCE Area Orchard Systems Advisor, Kern County Katherine Jarvis-Shean UCCE Orchard Systems Advisor, Sacramento, Solano and Yolo Counties

38

The articles, research, industry updates, company profiles, and advertisements in this publication are the professional opinions of writers and advertisers. Progressive Crop Consultant does not assume any responsibility for the opinions given in the publication.

January / February 2021

www.progressivecrop.com

3

MANAGING SOIL

STRUCTURE QUALITY AND

Physical & Chemical Management Practices to Maximize Soil Quality

By DR. KARL WYANT, Vice President of Ag Science, Heliae Agriculture, Board of Directors, Western Region Certified Crop Advisers

Y

ou may have heard or read about improving your soil health or soil quality over the last year as this area of field management gains more attention. But what exactly do the terms mean and how can you incorporate the concepts in your day-to-day soil management practices? In Part 1 of this article series, the physical and chemical connection to optimizing soil quality by focusing on the structure of your soil will be explored.

Soil Quality and Health

Soil quality has broad application to your farm.

It refers to how well a soil functions physically, chemically and biologically and how well it does its “job” (Fig. 1, page 6). For example, a forest soil has a different job than a farm soil, and soil properties can be measured on how well the soil is performing (e.g. soil structure).

Figure 3: The soil on the left has poor soil structure while the soil on the right has excellent aggregation and structure. As a result, the two fields have substantial differences in soil quality and their ability to support optimized crop growth (photo courtesy K. Wyant.)

4

Progressive Crop Consultant

January/February 2021

Many factors influence the soil quality on a farm and are summed up in Figure 2, on page 7. In this article, the focus will be on the physical and chemical management practices that maximize soil quality, expressed here as soil structure (Fig. 3).

Continued on Page 6

Potassium AN Essential Nutrient for tree Nuts.

Almonds remove roughly 91.2 pounds of K20 per 1,000 kernel pounds each season. Replenishing this potassium for the next season is crucial as it plays a vital role in tree nut development and disease resistance. The efficient liquid formulation of KTS® allows for application via drip or sprinkler irrigation.

Avoid potassium deficiencies. Apply KTS.

SCAN QR CODE

KTS® application guide & grower success stories! ©2021 Tessenderlo Kerley, Inc. All rights reserved. KTS® is a registered trademark of Tessenderlo Kerley, Inc.

January / February 2021

www.progressivecrop.com

5

soil structure and soil quality; however, pulling it off can be tricky. It is worth noting that some tillage can be beneficial (e.g. deep ripping of hard pans) but should be employed only when necessary to help avoid impacts on soil structure.

Figure 1: Holistic management tools that help improve soil structure and soil quality includes physical and chemical controls (Part I in this article series) and biological controls (Part 2).

Continued from Page 4 Soil health refers to the interaction between organisms and their environment in a soil ecosystem concept and the properties provided by such interactions (e.g. ecosystem stability).

When you think of soil health, think of the biological integrity of your field (e.g. microbial population and diversity) and a focus on supporting plant growth.

This will be the focus of Part 2 of this article series.

Poor soil structure and the resulting decrease in soil quality continues to impact yields in many farming areas.

This is because many factors can negatively impact soil structure, including soil compaction from field equipment, poor salinity management, rainfall and irrigation droplets, excessive tillage, etc.

Fortunately, fields that have poor structure (see Fig. 3 for a visual reference) can be fixed once you determine what is causing the issue. I strongly recommend that you put your field detective hat on and work with your favorite Certified Crop Adviser (CCA) to diagnose why your field is not performing as expected.

Physical Controls

Physical and chemical management strategies are important to help reverse poor soil structure and thus improve the overall soil quality of your field.

6

Progressive Crop Consultant

The physical controls on soil structure generally relate to reducing disturbance to the soil and protecting the soil from future disturbance. With this broad mandate, there are a variety of techniques out there to accomplish this goal and help restore soil structure, but reducing tillage and incorporating cover crops into the growing operation are the most important.

Tillage Practices and Soil Structure Field activities like tillage are crucial for any successful growing season, whether in the short term or long term. However, excessive tillage can be hard on your soil structure as common implements can slice, compact or crush soil aggregates and quickly change a soil from having excellent tilth (see right side of Fig. 3) to one that lacks those properties (see left side of Fig. 3). The physical destruction of aggregates can have an immediate impact on your soil quality and can impact your operation’s bottom line. Fortunately, there are many modern options for avoiding excessive tillage, including conservation tillage and residue management, strip tillage and even a complete elimination of the practice (no-till). Every operation is different, and changes in tillage need to take local growing practices into account before moving forward. Reducing tillage has been shown to improve

January/February 2021

Cover Crops This concept is related to keeping the soil covered and physically protected from disturbance into the future after the crop is planted. The cover crop, usually grown in between the rows of permanent crops (e.g. trees and vines) or in the ‘off-season’ for annual crops, can be used to shield the soil from wind and water erosion and also help open up soils that have a history of poor soil structure. Briefly, the canopy of a cover crop can intercept and slow the velocity of raindrops and break up wind gusts, which helps keep soil on the field.

Belowground, the root systems of cover crops can poke through clods and hard pans and help open up channels in the soil profile to help move water downward into the profile. Fine root hairs can also tie soil particles together, improving soil structure and quality.

Please contact your preferred CCA for more advice on tillage practices and cover crop selection and to see if it fits into your farming operation.

Chemical Controls

A common issue in fields that have poor soil structure and soil quality is related to a chemical relationship in the soil. A loss of soil structure due to a mismatch between soil structure, calcium and other elements is called deflocculation.

Under normal conditions, soil particles with ample calcium naturally come together to form aggregates, which improves soil structure. When the calcium is displaced by other ions (e.g. sodium), the soil structure collapses, and soil quality can quickly deteriorate.

One of the main goals of a chemical remediation program is to provide more calcium to the soil, thus reversing the

Figure 2: Crop productivity is influenced by several interrelated concepts, which have an impact on the soil quality of a field (courtesy K. Wyant.)

collapse in soil structure and driving an improvement in soil quality. The question is, “Which calcium amendment do I use?”

I cannot stress enough the need to start your program with a soil sample and to utilize the experienced advice from a CCA. Taking a soil sample will help you figure out the following important parameters critical to your chemical program: 1) Which amendment to use (e.g. gypsum, lime, sulfur product); and 2) Dosage of correct amendment to apply.

Critical parameters on the soil report worth looking at are soil pH, fizz test results, EC (dS/m), SAR, sodium and chloride results. For example, the fizz

Continued on Page 8

BOOT CAMP FOR BLOOM SUCCESS! Get the basics for bloom success in the field.

To achieve greatness, you’ve got to put in the work. Applications of Acadian® are the critical step that strengthen and condition your plants to produce when it counts the most. So, choose Acadian® for bloom success. Acadian® improves water management, enhances antioxidant levels and increases photosynthesis. Timing is vital to maximize genetic potential. Ensure your application program completes Boot Camp – get Acadian® in your tank-mix today!

Contact your local Acadian® representative: Chris Coolidge (Central CA) . . . 559-779-3579

Jeff Downs (SoCal/AZ) . . . . . . 559-285-8448

Duncan Smith (NorCal) . . . . . . 209-471-2412

Kollin Holzwart (SoCal) . . . . . 831-206-5442

acadian-usa.com

January/February 2021

www.progressivecrop.com

7

Continued from Page 7 test measures the amount of free lime in a soil (CaCO3), and this is either expressed qualitatively (low, high, etc.) or quantitatively (%). There are a few major bulk calcium amendments that are available to help restore your soil structure: lime, gypsum and sulfur products.

Lime Lime (CaCO3) is commonly used in soils that are acidic with soil structural issues and should not be confused with ‘free lime’ that shows up on a soil test report. Lime can provide a calcium source while also neutralizing acidic soil pH. Thus, soil quality can be improved on two separate fronts (soil structure and soil pH) with one program. Calculating the liming rate for a field (lbs/acre) can be tricky since you have to factor in both the amount

of calcium needed to fix your soil structure problem and the amount needed to adjust the pH. A good soil sample and an experienced CCA can help determine the optimum rate for your field.

Gypsum Gypsum (CaSO4) is a calcium amendment when one has low or very low fizz test readings. This is one reason why I recommend that you start your program with a soil test. When gypsum dissolves, it can supply calcium directly to the soil, which improves soil structure and allows excess salts (e.g. sodium) to drain. However, unlike lime and sulfur products, gypsum will have little impact on soil pH and should only be used to provide calcium to help restore soil structure and soil quality. An experienced CCA can help interpret your soil test and provide a reasonable gypsum recommendation (lbs/acre) to fix the issue.

YOU STICK TO GROWING. WE STICK TO YOUR SOIL. Guaranteed ROI, water efficiency, nut quality, and longer-term viability all with PhycoTerra®. > 4:1 ROI potential awaits.

Visit phycoterra.com/almonds for details.

8

Progressive Crop Consultant

January/February 2021

Sulfur Products Sulfur products, such as sulfuric acid and elemental sulfur, require the presence of free lime in the soil (CaCO3). As such, soils that have medium to very high fizz test ratings are a great candidate for the use of sulfur products in your chemical reclamation program. Briefly, sulfur products react with the free lime in the soil to create gypsum as a by-product. The calcium in the gypsum is then able to go to work to im-

prove soil structure. One advantage of using sulfur products is that you generally do not need as much material to get the job done as you do with gypsum (1 ton gypsum = 0.57 tons sulfuric acid = 0.19 tons elemental sulfur), which can impact field logistics and application costs.

Also, repeated applications of sulfur products can reduce problematic soil pH areas by moving the soil pH from alkaline to neutral. One disadvantage to using sulfur products is that they have several reaction steps that can slow the reclamation speed of the field relative to lime and gypsum. Also, sulfuric acid products present some safety concerns that must be considered from a worker safety and transport level.

Like lime and gypsum, an experienced CCA can help interpret your soil test and provide a reasonable recommendation (lbs/acre) to fix the issue.

Conclusion

Physical and chemical factors can have a profound impact on your overall soil structure and, thus, the soil quality of your field. Generally, poorly structured soils have a difficult time supporting optimized crop growth due to the severe reduction in water storage capacity, low oxygen, surface crusting and seed bed issues, accumulation of salinity, etc.

If your soil looks like the example on the left side of Figure 3, it may be well worth your time and money to start implementing soil improvement practices as outlined in this article. You have a variety of management options, including the implementation of practices that improve the physical components of soil quality (e.g. tillage reduction and use of cover crops) or the chemical components such as adding bulk calcium amendments to your program.

A bit of detective work beforehand determining why your field is having a soil structure problem can pay off in turning your field around and using

your input dollars most effectively.

In Part 2 of this article series, we explore the biological components that influence soil structure and soil health. We will define soil health and go through plenty of examples on how the living component of a soil can impact your soil structure and overall soil quality. Furthermore, we will discuss how to test for soil health in the field.

Suggested Reading

1.

Soil Health Partnership Blog https://www.soilhealthpartnership. org/shp-blog/ 2. Soil Health Institute Blog - https:// soilhealthinstitute.org/resources/ 3. PhycoTerra® Blog - phycoterra.com/ blog/

‘POORLY

STRUCTURED SOILS HAVE A DIFFICULT TIME SUPPORTING OPTIMIZED CROP GROWTH DUE TO THE SEVERE REDUCTION IN WATER STORAGE CAPACITY, LOW OXYGEN, SURFACE CRUSTING AND SEED BED ISSUES, ACCUMULATION OF SALINITY, ETC.’

Dr. Karl Wyant currently serves as the Vice President of Ag Science at Heliae© Agriculture where he oversees the internal and external PhycoTerra® trials, assists with building regenerative agriculture implementation and oversees agronomy training. Prior to Heliae Agriculture, Dr. Wyant worked as a field agronomist for a major ag retailer serving the California and Arizona growing regions. To learn more about the future of soil health and regenerative agriculture, you can follow his webinar and blog series at PhycoTerra.com.

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

Navel Orangeworm

Pheromone Mating Disruption

Op�mized Formula�on for 2021!

Simple Deployment!

in Traps 120

Average NOW / Trap / Season

ISOMATE ® Mist NOW

Grower Standard 100

ISOMATE Mist NOW

80 46% Reduction

60 40 20

99% Reduction

0

Pheromone

Egg Replicated 4x

- Chico, CA - 2019

- Almond Harvest 7 Average NOW Infested Nuts (%)

1 Mist Unit/Acre Use Rate

225+ Days

Pheromone Release

6 5 4 3

75% Reduction

2 1 0

Grower Standard Replicated 4x

Jeannine Lowrimore Northern California 209.603.9244

Christeen Abbott-Hearn

Central California 559.334.7664

ISOMATE® Mist NOW

- Chico, CA - 2019

PACIFIC BIOCONTROL CORPORATION www.pacificbiocontrol.com ISOMATE® is a registered trademark of Pacific Biocontrol

January/February 2021

www.progressivecrop.com

9

Botrytis gray mold in trials at the UC Shafter Research Station (all photos by S. Dara.)

Soil Application of Fungicides in

STRAWBERRY Study Looks at Drip Applications and Potential Impact on Crop Health and Yields

By SURENDRA DARA, UCCE Entomology and Biologicals Advisor

10

Progressive Crop Consultant

January/February 2021

Propagules of gray mold fungus survive in the soil and infect flowers and fruits.

Methodology

This study was conducted in an experimental strawberry field at the Shafter Research Station in fall-planted strawberry during 2019-2020. Cultivar San Andreas was planted on October 28, 2019. No pre-plant fertilizer application was made in this non-fumigated field which had Fusarium wilt, Macrophomina crown rot and Botrytis fruit rot in the previous year’s strawberry planting.

Ampersand

Spock

Luigi

Robin

Pippen

®

S

trawberry is a high-value specialty crop in California and is susceptible to multiple pathogens that infect roots, crowns, foliage, flowers and fruits. Verticillium wilt caused

by Verticillium dahliae, Fusarium wilt caused by Fusarium oxysporum f. sp. fragariae and Macrophomina crown rot or charcoal rot caused by Macrophomina phaseolina are major soilborne diseases that cause significant losses if they were not controlled effectively.

Chemical fumigation, crop rotation with broccoli, nutrient and irrigation management to minimize plant stress and non-chemical soil disinfestation are usual control strategies for these diseases. Botrytis fruit rot or gray mold caused by Botrytis cineaea is a common flower and fruit disease requiring frequent fungicidal applications.

Propagules of gray mold fungus survive in the soil and infect flowers and fruits.

A study was conducted to evaluate the impact of drip application of various fungicides on improving strawberry health and enhancing fruit yields.

EVEN THE GREATS

NEED HELP BEING GREAT.

51%

Improved conventional herbicide performance*

79%

85%

Increased organic herbicide performance*

Increased insecticide performance*

Ampersand adjuvant works differently than other surfactants to maximize the potential of your herbicide or insecticide’s chemistry, even at low use rates, to levels never seen before. ®

Ampersand

®

a d j u v a n t

Both soilborne diseases were present throughout the field during late spring

Learn more about our technology at

Continued on Page 12

*compared to active alone

www.attuneag.com

January / February 2021

www.progressivecrop.com

11

Continued from Page 11

1. Fruit yield per plant from 11 weekly harvests between March 11, 2020 and May 14, 2020.

Fruit yield per plant from 11 weekly harvests between March 11, 2020 and May 14, 2020.

2019 with symptoms of wilt or crown rot appearing in many plants. In the current study, each treatment was applied to a 300-foot-long bed with single drip tape in the center and two rows of strawberry plants. Sprinkler irrigation was provided immediately after planting along with drip irrigation, which was provided one or more times weekly as needed for the rest of the experimental period.

Each bed was divided into six 30-footlong plots, representing replications, with an 18-foot buffer in between.

Between November 6, 2019 and May 9, 2020, 1.88 qt of 20-10-0 (a combination of 32-0-0 urea ammonium nitrate and 10-34-0 ammonium phosphate) and 1.32 qt of potassium thiosulfate w ere applied 20 times at weekly intervals through fertigation. Treatments were applied either as a transplant dip or through the drip system using a Dosatron fertilizer injector (model number D14MZ2). The following treatments were evaluated in this study: 1.

2.

Leaf chlorophyll and nitrogen content between February 4, 2020 and May, 15 2020.

3.

4.

5.

Marketable fruit yield on various harvest dates. Marketable yield was 4% to 28% higher where fungicides were applied to the soil with the exception of Abound dip, which resulted in 16% less marketable yield.

12

Progressive Crop Consultant

January / February 2021

Untreated control: Neither transplants nor the planted crop was treated with any fungicides.

Abound transplant dip: Transplants were dipped in 7 fl oz of Abound (azoxystrobin) fungicide in 100 gal of water for four minutes immediately prior to planting.

Transplant dip in a fungicide is practiced by several growers to protect the crop from fungal diseases.

Rhyme: Applied Rhyme (flutriafol) at 7 fl oz/ac immediately after and 30, 60 and 90 days after planting through the drip system.

Velum Prime with Switch: Applied Velum Prime (fluopyram) at 6.5 fl oz/ac 14 and 28 days after planting followed by Switch 62.5 WG (cyprodinil + fludioxinil) at 14 oz/ ac 42 days after planting through the drip system.

Rhyme with Switch: Four applications of Rhyme at 7 fl oz/ac were made 14, 28, 56, and 70 days after planting with a single application of Switch 62.5 WG 42 days after planting through the drip system.

N AV E L O R A N G E WO R M M A N AG E M E NT Parameters observed during the study included leaf chlorophyll and leaf nitrogen (with chlorophyll meter) in February and May; fruit sugar (with refractometer) in May; fruit firmness (with penetrometer) in April and May; severity of gray mold twice in March and once in May; other fruit diseases (mucor fruit rot caused by Mucor spp. and Rhizopus fruit rot caused by Rhizopus spp.) once in May, three and five days after harvest (on a scale of 0 to 4 where 0=no infection; 1=1-25%, 2=26-50%, 3=51-75% and 4=76-100% fungal growth); and fruit yield per plant from 11 weekly harvests between March 11, 2020 and May 14, 2020. Leaf chlorophyll and nitrogen data for the Abound dip treatment were not collected in February. Data were analyzed using analysis of variance in Statistix software and significant means were separated using the Least Significant Difference test.

NO 0

PUFF

JUST PERFORMANCE

0 CIDETRAK®NOW MESO™

• Turned on 24-7 • No maintenance/No second guessing • Full season results • More Pheromone distribution

Results and Discussion

Leaf chlorophyll content was significantly higher in plants that received drip application of fungicides compared to untreated plants in February while leaf nitrogen content was significantly higher in the same treatments during the May observation. There were no differences in fruit sugar or average fruit firmness among the treatments.

The average gray mold severity from three harvest dates was low and did not statistically differ among the treatments. However, the severity of other diseases was significantly different among various treatments with the lowest rating in Abound transplant dip on both three and five days after harvest and only three days after harvest in plants that received four applications of Rhyme. Unlike the previous year, visible symptoms of the soilborne diseases were not seen during the study period to evaluate the impact of the treatments. However, there were significant differences among treatments for the marketable fruit yield.

Continued on Page 14

— Steve Gruenwald, PCA Growers Choice, Owner

Steve’s IPM Program

LEARN MORE

®

INCORPORATED INSECT PHEROMONE & KAIROMONE SYSTEMS

Your Edge – And Ours – Is Knowledge.

trece.com © 2021, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-1855, 12/20

January / February 2021

www.progressivecrop.com

13

Continued from Page 13 The highest marketable yield was observed in the treatment that received Rhyme and Switch followed by Velum Prime and Switch and Rhyme alone.

The lowest fruit yield was observed in Abound dip treatment. Unmarketable fruit (deformed or diseased) yield was similar among the treatments. Compared to the untreated control, Abound dip resulted in 16% less marketable yield and such a negative impact from transplant dip in fungicides has been seen in other studies (Dara and Peck, 2017 and 2018; Dara, 2020). Marketable fruit yield was 4% to 28% higher where fungicides were applied to the soil.

Although visible symptoms of soilborne diseases were absent during the study, periodic drip application of the fungicides probably suppressed the fungal inocula and associated stress and might have contributed to increased

14

Progressive Crop Consultant

yields. The direct impact of fungicide treatments on soilborne pathogens was, however, not clear in this study due to the lack of disease symptoms.

Considering the cost of chemical fumigation or soil disinfestation and the environmental impact of chemical fumigation, treating the soil with fungicides can be an economical option if they are effective. While this study presents some preliminary data, additional studies in non-fumigated fields in the presence of pathogens are necessary to consider soil fungicide treatment as a control option.

Acknowledgments

Thanks to FMC for funding this study and Marjan Heidarian Dehkordi and Tamas Zold for their technical assistance.

January / February 2021

References

Dara, S. K. 2020. Improving strawberry yields with biostimulants and nutrient supplements: a 2019-2020 study. UCANR eJournal of Entomology and Biologicals. https://ucanr.edu/blogs/blogcore/postdetail.cfm?postnum=43631.

Dara, S. K. and D. Peck. 2017. Evaluating beneficial microbe-based products for their impact on strawberry plant growth, health, and fruit yield. UCANR eJournal of Entomology and Biologicals. https:// ucanr.edu/blogs/blogcore/postdetail. cfm?postnum=25122.

Dara, S. K. and D. Peck. 2018. Evaluation of additive, soil amendment, and biostimulant products in Santa Maria strawberry.

CAPCA Adviser, 21 (5): 44-50.

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

THE BEST WAY TO MANAGE PATHOGENS BEFORE THEY BECOME AN ISSUE.

TriClor is chloropicrin based and can be used as a standalone or as a complement to Telone® depending on your orchard redevelopment needs. When targeting soil borne disease and nematodes, TriClor and Telone® can be applied in a single pass. This reduces application costs, promotes early root development, and improves soil health. For more information about TriClor and Telone or to schedule an application contact TriCal, Inc.

669-327-5076

www.TriCal.com Authorized distributor for Telone® *TriClor and Telone are federally Restricted Use Pesticides.

ALTERNATIVE NEMATICIDES FOR ROOT-KNOT NEMATODES IN

MELONS

By JASPREET SIDHU, UCCE Vegetable Crops Farm Advisor, Kern County

C

alifornia is one the largest producers of melons in the U.S., and melons most commonly grown in California are cantaloupes and honeydew types. Although some acreage is reported throughout the state, most are grown in the Southern desert valleys and San Joaquin Valley.

Root-knot nematodes (RKN), Meloidogyne spp., are the most significant plant parasitic nematodes affecting melon production in California, especially in light-texture soils. The nematodes are widespread in Central and Southern California.

Damage results from feeding of second stage juveniles (J2) inside melon roots, and the roots respond to nematode invasion by formation of root galls.

Nematode-infested plants become stunted and less vigorous with severe galling of roots. Deformed roots due to galls are unable to sustain the water and nutrient needs of the plant in hot weather, leading to wilting and poor growth of plants, reduced yield and poor fruit quality. Nematode-infested plants may also become more vulnerable to other soilborne pathogens.

Currently, there are no resistant cultivars in melons, and RKN management has mainly relied on the use of preplant soil fumigants and soil-applied nematicides. Management with these prod16

Progressive Crop Consultant

ucts is expensive and involves safety and environmental risks. New fumigant regulations by the Department of Pesticide Regulations (DPR) have been put in place to restrict the emissions of volatile organic compounds from the use of soil fumigants. These regulations include limits on the amount of soil fumigants a grower is allowed to use in a year, caps on the amounts allowed within a township and new expanded buffer zones, meaning large parts of a field may not be treated all. These new regulations by DPR may mean that there will be some fields not treated for nematodes because of caps placed on the amount a grower is allowed to use or caps on the amount of fumigants allowed in a township.

Alternative control options that have high efficacy, are economically viable and environmentally safe need to be evaluated under field situations. The goal of this project was to evaluate the efficacy of Salibro, an organic product and a developmental product (DP1) in comparison to Nimitz (fluensulfone) in melons applied through deep-buried drip tube. Nimitz is registered on melons in California.

2020 Field Trial

This study was conducted as a small plot field trial on our RKN-infested site at the Shafter research farm. A western January / February 2021

shipper-type melon variety, ‘Durango’, was hand transplanted onto 60-inch beds on June 30, 2020. There were four replications and five treatments in this trial arranged in a randomized block design. Rates, timings and method of application for each treatment is listed in Table 1, on page 18. Each plot was 20 feet in length with a five-foot buffer between plots along the bed. Treatments were applied either as a pre-plant or post-plant application through buried drip. Before chemigation, water was run for ten minutes to ensure all treatment tubing was filled, and after, chemigation water was run for about 20 minutes to flush the lines. The plots were irrigated using a surface drip and maintained using standard agronomic practices.

Before applying the treatments, soil samples were collected from all plots using a sampling tube at a depth of eight to 10 inches and submitted for analysis to determine the RKN count.

Soil samples were collected and analyzed for nematodes again at harvest.

Melon roots were evaluated for galling at mid-season and at harvest. Data on nematode counts and root galling was analyzed using SAS (statistical analysis software).

Continued on Page 18

January / February 2021

www.progressivecrop.com

17

Continued from Page 18

Data and Results

Table 1: Treatments, rate/A, application schedule and timings.

Table 2: Mid-season average plant vigor of melon plots in five treatments during the 2020 growing season. Vigor on a scale of 1-5, with 1=worse and 5=best plants.

Table 3: Average plant weight (g±SE) of melon vines in five treatments during the 2020 growing season.

Table 4: Average root galling of melon plots in five treatments during the 2020 growing season. Galling on a scale of 0-10 (0=no galls, 10=completely galled roots).

18

Progressive Crop Consultant

January / February 2021

Plant vigor for each plot was rated visually on August 11, 2020 on a scale of 1-5, with 1=worse and 5=best plants.

Vigor included the size of the vines and general appearance or health of plants.

On the same day, five plants from each plot were randomly selected and visually rated for severity of root galling on a scale of 0-10; (0=no galls, 10=completely galled roots). The average galling on these five plants was used to give a galling index for each plot. The fresh shoot weights of these plants (without fruits) were determined.

At harvest on September 22, 2020, soil samples were collected from each plot for RKN count. All plants in each plot were dug and the severity of root galls on these plants was visually rated on a scale of 0-10 (0=no galls, 10=completely galled roots). The average of the galling on these plants in each plot was used to give a galling index for each plot.

Plant Vigor No obvious differences were observed in plant vigor among treatments (Table 2). Some plots were a little more vigorous than others, but these differences were not attributed to treatment effect.

There were no significant differences observed in fresh shoot weight of melon plants during mid-season evaluation on August 11 (Table 3). However, Nimitz resulted in higher shoot weights than the other treatments.

Root Galling The severity of root galling was assessed at mid-season and at harvest. At mid-season evaluations, root galling was moderate and ranged between 2.4 in the Nimitz treatment and 4.6 in the untreated control (Table 4). Root galling in Nimitz and Gropro treatments was significantly lower than the other treatments. At harvest, there was a little increment in root galling across all treatments, however there were no

Figure 5. Root galling at harvest. 1) Untreated control 2) Nimitz 3) Gropro 4) Salibro 5) DP1

significant differences among treatments. Surprisingly, Salibro and the developmental product was not beneficial in the trial and had higher root gall ratings than the non-treated control plots at harvest.

Fruit Growers Laboratory, Inc.

Precision Analyses for Improved Crop Quality & Yield www.fglinc.com

Conclusion

In our 2020 trial, there were some treatment effects on mid-season root galling with Nimitz and the organic product Gropro having statistically lower root galling index compared to other products. However, none of the treatments were significantly different at harvest, and the results indicate that none of the treatments had a long-lasting effect on RKN levels in the soil. Therefore, further evaluations are needed to better determine the efficacy of these products as sole treatments and in combination with other products and their potential and continued use by the melon industry.

This project was funded by the California Melon Research Board.

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

LEAF TISSUE

WATER

SOIL FOOD SAFETY

ORGANIC

AMENDMENTS

PARASITIC NEMATODE

DISEASE I.D.

Contact One of Our Convenient Locations for Assistance Corporate Offices & Lab Santa Paula, CA (805) 392-2000

Office & Lab Stockton, CA (209) 942-0182

Office & Lab Chico, CA (530) 343-5818

January / February 2021

Office & Lab San Luis Obispo, CA (805) 783-2940

Office & Lab Visalia, CA (559) 734-9473

www.progressivecrop.com

19

VINEYARD REVIEW

Weather Station use in

VINEYARDS Newly Developed Weather Technologies Provide Multiple Beneficial Insights to Growers

BY GABRIEL TORRES, UCCE Viticulture Farm Advisor and STEPHEN VASQUEZ, Technical Viticulturist, Sun-Maid Growers

An anemometer, found at the top of the weather station, measures wind speed and direction and can be placed in or near the vineyard. (all photos courtesy S. Vasquez.)

T

alk to a farmer; at some point, the discussion will focus on the weather. It is the number-one topic discussed amongst farmers because weather can impact farming in significant ways. A rain event in June may benefit one crop but negatively impact another. Weather forecasts are important for scheduling farm activities, and for many years, farmers relied on the Farmer’s Almanac for long-range forecast.

Fortunately, today’s California farmers have multiple options to obtain weather forecasts and real-time data to make farming decisions. One of California’s 20

Progressive Crop Consultant

oldest publicly accessible weather networks is the California Irrigation Management Information System (CIMIS).

Built to improve irrigation efficacy, UC Davis and the California Department of Water Resources (DWR) established CIMIS in 1982. CIMIS has provided California growers with weather data accessed via the internet at cimis. water.ca.gov/. Growers can select one of the 145 stations near their property, download the data to a computer and manipulate it for their use (e.g. calculating ET). However, todays farmers are busier than ever, and having to rely on downloading climate data throughout the season can be challenging, especialJanuary / February 2021

ly when data from multiple locations are needed or when there are not any CIMIS stations nearby.

The CIMIS weather station network has been, and continues to be, a valuable tool for agriculture. But growers and researchers need weather data that better represents their farm or research location. Some of California’s first “local weather stations” used in vineyards were hygrothermographs that recorded temperature and humidity. Several UC grapevine pest and disease models were developed and tested in the late 70s and early 80s using hygrothermo-

Continued on Page 22

Because protection requires great precision.

Protect against harmful pests while helping safeguard beneficials.

Sivanto® Prime insecticide precisely targets key damaging pests like Asian citrus psyllid, citricola scale and aphids while helping safeguard beneficial insects. In doing so, Sivanto Prime preserves the overall health of your plants and, most importantly, protects your investment. Sivanto Prime: precision that preserves and protects.

Learn more at SivantoInsecticide.com.

ALWAYS READ AND FOLLOW PESTICIDE LABEL DIRECTIONS. Not all products are approved and registered in all states and may be subject to use restrictions. The distribution, sale, or use of an unregistered pesticide is a violation of federal and/or state law and is strictly prohibited. Check with your local product dealer or representative or U.S. EPA and your state pesticide regulatory agency for the product registration status in your state. Bayer, Bayer Cross, and Sivanto® are registered trademarks of Bayer Group. For additional product information, call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at www.BayerCropScience.us. Bayer CropScience LP, 800 North Lindbergh Boulevard, St. Louis, MO 63167. ©2021 Bayer Group. All rights reserved.

January / February 2021

www.progressivecrop.com

21

Continued from Page 22 graphs placed throughout California’s vineyards. However, in the late 80s, hygrothermographs were replaced with weather stations equipped with radio telemetry and controlled by a data-collecting base station. Since then, as technology improved, weather stations have become more sophisticated and provide real-time, on-demand data, 24 hours/day.

Growers can log onto CIMIS once an account has been setup

General and detailed weather station information from an app.

Some of the first weather stations recorded temperature, humidity, precipitation and wind speed and direction, displaying the data as graphs that needed some interpretation. Today’s grape growers have access to the same data, but data presentation is clearer with user-friendly web portals and phone and tablet apps. Additionally, climate, environmental and irrigation sensors have been improved or newly developed to generate data that can be used to make farming decisions (e.g. solar radiation, atmospheric pressure, leaf wetness, plant and fruit growth, plant health, soil moisture, electrical conductivity, pH, nitrogen, phosphorus, potassium, microbial activity, water pressure and usage, and more). Having access to numerous types of data allows growers to manage their vineyards in a much different manner than just a decade ago.

However, access to that much data can be overwhelming if it is not understood or managed properly. Growers should be trained or have dedicated personnel to help interpret the information and share it with colleagues that will be making farm management decisions.

Some Practical Uses of Vineyard Weather Station Data

Advanced sensor technology has made it easier for growers to install, build, maintain and expand a reliable in-house network of stations collecting different information. Access to local data helps decision-making that impacts crop yield and quality. For example, in addition to knowing how much precipitation a vineyard experienced during a rain event, information such as leaf wetness, relative humidity, Disease model (left) and degree days threshold option (right).

22

Progressive Crop Consultant

January / February 2021

soil moisture and wetting depth can help forecast diseases (i.e. bunch rot), future fertilizer and irrigation applications and general vineyard activity that involves tractor work. Combine that information with vineyard characteristics (i.e. variety, soil type, etc.) and suddenly growers can evaluate more acres with fewer vineyard visits that save them time and money. The improved collection and transmission of data from base (aka weather) stations equipped with unique sensors have become valuable tools for managing vineyards.

Base stations now incorporate weather, phenological, pest and disease models developed by university researchers to enhance their offerings via portals and apps. The following are some additional applications that can benefit grape growers interested in designing their own network of sensors.

Pesticide Applications

Pesticide applications must follow California’s laws and regulations. Prior to any application, climatic conditions must be checked so pesticide applications are optimized. Having a base station within a vineyard can improve pesticide application efficiency and efficacy. An anemometer, which measures wind speed and direction, can help pesticide applicators decide if wind conditions will permit a pesticide application.

Wind speeds need to be between 2 to 10 mph to make a legal application. Knowing the wind direction can help decide the potential movement of a pesticide to an undesirable target (i.e. organic field). Tracking vineyard temperature can help determine if temperatures are hot enough to cause spray mist evaporation or phytotoxicity. In that situation, waiting for daytime temperatures to cool or spraying at night could help solve the issue. Being able to check a vineyard’s temperature prior to sending a crew to apply pesticides will save time, money and improve pesticide planning. Temperature sensors can also be used to detect inversion layers that can contribute to pesticide drift. Placing temperature sensors at multiple heights

(e.g. 5 feet and 30 feet) will determine if the lower layer is cooler than the upper layer. When this happens, pesticides can move horizontally from thousands of feet to miles from the original point of application. When a vineyard experiences inversion layers, temperature sensors and a base station can detect the scenario and send an alarm to the person planning pesticide applications.

Degree Days and Temperature Modeling

Temperature, measured in degree-days (DD), influences grapevine growth throughout the season. From grapevine bud dormancy to fruit maturity, temperature regulates vine and fruit development. DD model predictions can help growers prepare for seasonal

Continued on Page 24

Extremely Effective Post Emergent Herbicide!  ACTIVE INGREDIENT - 15.9 % Phenmedipham  ONLY A.I. REGISTERED for Control of Broadleaf Weeds in Spinach (grown for processing and seeding) and Red Garden Beets.  NEW FIFRA 2(ee)* Spinach Recommendation (CA & AZ) Offers Application Window Flexibility  NOW AVAILABLE in One Gallon Other Innovative Products* From Belchim Crop Protection: Containers!!

Visit:www.belchimusa.com

Other Innovative Products From Belchim Crop Protection:

Visit:www.belchimusa.com

EPA Reg. No. 264-616-87865

January / February 2021

Belchim Crop Protection USA, LLC 2751 Centerville Road | Suite 100 Wilmington, DE 19808 Phone: 855-445-7990 Email: info.usa@belchim.com

www.progressivecrop.com

23

Continued from Page 23 cultural practices (i.e. bloom sprays).

For grapes, temperatures greater than 50 degrees F have been determined as the developmental DD threshold. In California, Thompson Seedless development as a function of DD has been determined. Approximately 50% bud break for this cultivar is observed when 155 DD are obtained with a February 20th start date. To reach 50% bloom, an additional 741 DD are needed, with

®

maturity reached between 2880-3240 DD. A grower can use this information to track and identify DD specific to the varieties that they grow that have similar growth characteristics to Thompson Seedless. UC has also developed DD models for western grape leafhopper, omnivorous leafroller, powdery mildew and other pests and diseases to help grape growers make management decisions.

The Grower’s Advantage © Since 1982

Chilling Hours

Grapes require a specific number of chill hours to complete dormancy, break bud and begin a new season. The minimum number of chill hours required for grapes to produce a commercially viable crop averages approximately 150 hours, which is low compared to stone fruit (i.e. cherries, peaches, etc.) that need ≥800 hours. Without adequate chill hour accumulation, bud break and yield become erratic, increasing farming costs significantly.

Knowing when chill hour requirements are not being met can help a grower decide when to apply chemicals that improve bud break. A local weather station can better define chill hour accumulation than regional weather data (i.e. CIMIS). Most weather stations can automatically calculate the chill hours and portions. The chill portions algorithm accounts for warmer times of the day and presents a clearer forecast for predicting cold temperature needed for uniform bud break. More information about chill hour accumulation can be found here: fruitsandnuts.ucdavis.edu/ Weather_Services/chilling_accumulation_models/about_chilling_units/.

Worker Protection

Effective Plant Nutrients and Biopesticides to Improve Crop Quality & Yield

ORGANIC

ORGANIC

®

Plant Nutrients & Adjuvants

Contains Auxiliary Soil & Plant Substances

Botector

®

Biofungicide

®

®

Herbicide EC

G ARGOIL

®

INSECT, MITE & DISEASE CONTROL

Blossom Protect ™ Biopesticide

For more information, call (800) 876-2767 or visit www.westbridge.com

24

Progressive Crop Consultant

Worker protection is undoubtedly one of the most important responsibilities a grower has when people are working in the vineyard. Excessive UV or heat exposure can result in chronic and acute health issues. Weather stations not only track and monitor adverse weather conditions, but can also be programmed to send warning emails prior to critical UV or heat events. Since growers must record these events, weather station data is an easy way obtain documentation.

January / February 2021

Weather stations have many uses in the vineyard beyond temperature and precipitation. The complexity of the station will depend on a grower’s need. They can generate an enormous amount of data that will need to be interpreted correctly so good decisions

Continued on Page 26

Insecticide | Fungicide | Organic

Increase Yield Reduce Offgrade Boost Sales

Simplify your IPM with the only all-in-one organic product that eliminates sap-sucking pests, molds, and mildews while supporting stress tolerance!

Originating from research initially aimed at treating cancers, PureCrop1 is a potent insecticide and fungicide that aids plant health with benefits such as improving resistance to abiotic stress and increasing Brix. PureCrop1 is an all-in-one treatment that makes growing easier (and less expensive) by delivering the power of multiple products in one organic formula. Containing only seven plant-based ingredients, PureCrop1 is friendly to humans, the environment, and even beneficial insects!

ORGANICS ARE BREAKING RECORDS, ARE

YOURS?

Almond Study

3800

In this study, PureCrop1 increased yield and decreased offgrade significantly, with results further improving over time.

22

3000 2200

1

<1

In the 2019 and 2020 seasons, PureCrop1 was used throughout the cycle.

PureCrop1 was not used in 2018.

Nectarine Study

This 2020 study demonstrates PureCrop1’s effect on California nectarines.

The test plot received a total of seven applications of PureCrop1 applied at 1% – 1.75% dilution.

Results show PureCrop1 raised Brix levels, as well as calcium levels. View more trials on our website.

info@purecrop1.com

www. PureCrop1.com

(707)621-8939

Table 1: Types of sensors needed to make management decisions.

Continued from Page 24 can be made. Table 1 shows what types of information can be determined from the different kinds of sensors.

Selecting a Weather Station that Makes Sense

Purchasing the right weather station will depend on the type of data needed to meet your needs. With multiple weather station options, growers can design a simple or complex weather station network that best suits their farm operation. Working with a weather tech company will help a grower determine their specific needs. After an initial needs assessment, a few follow-up meetings with a vendor will help finetune a weather network design. A 40acre vineyard might easily be covered by a single station, especially when site characteristics are similar (i.e. climate, soil). However, using a single station to cover a 400-acre vineyard could result in misinterpreted climate data that may vary over a large property. Advancements in communication and sensor technologies now make it possible to have multiple sensors communicate remotely with a base station and have the information organized into an easyto-read format.

Hardwired vs Solar Panel

The decision to use hardwired or solar power will depend on where the station will be located. Easy access to elec-

26

Progressive Crop Consultant

tricity and/or communication lines is usually the determining factor. Open space near buildings or rooftops are sometimes preferred because electricity is in close proximity. If in-field hardwired installation is preferred, wires placed in conduit to the correct depth and properly wired will be needed to avoid damage or interference with data collection. Solar-powered stations have become more affordable and are also easy to install. Solar panels and batteries will need to be checked and maintained biannually to avoid data collection interruptions. Whichever type you choose, it’s important to avoid installing stations near tall objects (e.g. trees, utility poles, buildings), paved roads or bodies of water because they will interfere with data collection. Poor site selection can result in poor data collection.

Number of Soil Moisture Sensors Per Acre

Temperature, humidity and wind speed and direction are less variable than soil moisture and can be located in one or two areas that represent the property (e.g. pump station). However, the number of soil moisture sensors required per block will depend on how variable the soil texture is. If soil and topography are homogeneous (i.e. uniform), and several blocks have similar characteristics (e.g. cultivar, rootstock,

January / February 2021

age, irrigation and management), two or three sampling points should be sufficient. Soil moisture measurements should be set at a minimum of one, three and five-foot depths to determine water movement. However, soil moisture sensors can take measurements every foot, which may be needed for certain situations. Additionally, if a vineyard has different types of soils that represent different blocks, multiple soils moisture sensors may be needed to collect accurate data for irrigation scheduling.

Basic vs High-End Stations

All weather stations will provide some type of climate data, but vineyard size (acres), one’s knowledge and confidence in interpreting the data and data access frequency will help you identify they type of weather station that’s right for your operation. A basic station will offer traditional climate data like temperature, humidity and, in some cases, rainfall amounts. In addition to traditional climate information, more sophisticated weather stations will include wind speed, soil moisture, water pressure and amounts, etc. that will result in a lot of data that someone will need to track if weekly decisions are going to be made. It’s important to evaluate the presentation of the data that weather station vendors offer. Portals and apps have simplified the way

that growers see and use large amounts of data, which makes it easier for vineyard decisions to be made. If you have a larger operation or want to have a more automated system, a station that is connected to the internet can be a better option. With this station, you will be able to collect the data in real time in the field or remotely. General and more detailed data can be accessed from your computer or phone app. Some manufacturers offer services to set alarms for pest and diseases based on models, degree days and chilling days. The alarms can be sent to your phone via text, email or automated call. Services varies from providers.

No matter what type of base station and sensor configuration you choose to purchase, it is important that you first identify what information will help you make better management decisions.

Additionally, you should identify someone that will be tasked with monitoring the system and sharing information with farm personnel. This person should be involved in the discussions with the vendor(s) since they will also be in constant contact with the vendor’s customer service representative.

N AV E L O R A N G E WO R M M A N AG E M E N T

LESS 0 DAMAGE

MORE 0

ROI

CIDETRAK® NOW MESO™

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

‘ THE IMPROVED COLLECTION AND TRANSMISSION OF DATA FROM BASE (AKA WEATHER) STATIONS EQUIPPED WITH UNIQUE SENSORS HAVE BECOME VALUABLE TOOLS FOR MANAGING VINEYARDS.’

— Kevin Davies, Tehama Angus Ranch Kevin’s IPM Program

LEARN MORE

®

INCORPORATED INSECT PHEROMONE & KAIROMONE SYSTEMS

Your Edge – And Ours – Is Knowledge.

trece.com © 2021, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-1851, 12/20

January / February 2021

www.progressivecrop.com

27

Dormant Season Yield & Disease MANAGEMENT Winter Pruning Improves Yield, Quality and Lifespan of Vineyards

By GEORGE ZHUANG, UCCE Viticulture Farm Advisor, Fresno County and MATTHEW FIDELIBUS, UCCE Viticulture Specialist

P

runing and disease management are important vineyard practices that need attention in the dormant season. Pruning directly affects the upcoming season’s potential yield and quality and can directly and indirectly affect the vineyard’s long-term productivity. Pruning practices, and the care of pruning wounds, can also help manage trunk diseases. Pruning practices that optimize productivity and quality, and protect against trunk disease, will help extend the productive lifespan of vineyards.

Dormant Pruning and Yield Management

Grapevines are pruned for three main reasons:

1.

Figure 1: Bud fruitfulness from different nod positions on 15-node and 20-node canes of common raisin varieties in California. Figure is elaborated from Cathline et al. 2020. Catalyst: Discovery into Practice. 4: 53-62.

28

Progressive Crop Consultant

January / February 2021

To keep the vine in a shape that conforms to the trellis system and facilitates vineyard operations.

2. To remove old wood and retain fruiting canes or spurs for the current season crop, plus spurs for future wood placement.

3. To select a quantity and quality of fruiting wood that is in balance with vine growth and capacity.

Continued on Page 30

ADVERTORIAL

/// Rising Impact of Almond Bloom Diseases Game Plan for a Winning Season Bloom diseases are opponents that are constantly evolving. They are more prevalent than ever in California, where increasingly erratic weather is a consistent threat, creating prime conditions for diseases to thrive and have a significant effect on almond yield potential. As a result, growers need a strategic game plan to make the best countermove against bloom diseases while also managing resistance.

Scala,® Luna Experience® and Luna Sensation® from Bayer are the recommended fungicide treatments to counteract these challenges. Growers can’t out-spray bloom diseases, but they can outsmart them through a combination of knowledge, application timing and by using products that demonstrate consistently high performance, overcome weather challenges and manage resistance.

“We’re kicking off with Scala,” notes grower Scott Long, general manager for Superior Fruit Ranch in Ceres, California. “We’ll come back with Luna® and that gives us full coverage, plus it really helps us cover all aspects and concerns in the early spring period.”

Luna Experience and Luna Sensation are strong choices for maximizing yields by providing longlasting, broad-spectrum disease protection when applied at bloom. Luna penetrates green tissue and moves systemically into closed buds, protecting against Brown rot blossom blight, Jacket rot, Shot hole, Anthracnose, Scab, Rust and Alternaria. It also offers two built-in modes of action for each product, providing the flexibility to alternate FRAC groups for more effective fungicide resistance management.

“I use Luna products predominantly in the bloom time for a myriad of diseases,” says PCA David Vermeulen of Vernalis, California. “I like the ease of handling, and it mixes well with a number of other products. It also covers a broad spectrum of different fungal diseases I’m going after.”

“We always like to recommend that our fungicides are used in a preventive manner prior to there being disease issues. So proper timing is very important,” says Matthew Wilson, field sales representative for Bayer.

Scala fungicide is notable for its control of Brown rot blossom blight at pink bud as an early-season spray option. It also offers both preventive and curative activity, rapid penetration and an ease of mobility into the bud and blossom. It is crop safe, mixes well with IPM programs and other products, and is effective across a wide range of temperatures and weather conditions, with minimal adverse effects on beneficial insect species.

Diseases to Watch /// Brown Rot Blossom Blight – Thrives in humid temperatures with or without rain. /// Anthracnose – Originates in warm, rainy weather. /// Jacket Rot – Rare, but, under cool and wet conditions at bloom, can cause devastating loss. /// Scab – Favors wet weather and spreads to new sites by wind or rain. /// Shot Hole – Requires prolonged periods of moisture, and water moves spores to new sites.

PCA Ryan Garcia of Salida Ag Chem in Modesto, California, uses Scala. “I’ll use it in the early stages of bloom for Brown rot blossom blight. I think it’s a great material.”

/// Alternaria – Develops with high humidity where dew forms and air is stagnant. /// Rust – Favors humid conditions, worsens in rainy weather and spreads easily by wind.

Application Timing PINK BUD

BLOOM

February

GROWTH March

SHELL-HARDENING

April

May

June

HARVEST July

August

September

Brown Rot Blossom Blight, Jacket Rot Brown Rot Blossom Blight, Jacket Rot, Anthracnose, Shot Hole, Scab Rust, Alternaria Hull Rot

Prepare for a winning season and learn more about bloom disease management.

Contact your Bayer representative or visit LunaScalaGamePlan.com.

ALWAYS READ AND FOLLOW PESTICIDE LABEL DIRECTIONS. Not all products are approved and registered in all states and may be subject to use restrictions. The distribution, sale, or use of an unregistered pesticide is a violation of federal and/or state law and is strictly prohibited. Check with your local product dealer or representative or U.S. EPA and your state pesticide regulatory agency for the product registration status in your state.

Bayer, Bayer Cross, Luna,® Luna Experience,® Luna Sensation,® and Scala® are registered trademarks of Bayer Group. For additional product information, call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at www.BayerCropScience.us. Bayer CropScience LP, 800 North Lindbergh Boulevard, St. Louis, MO 63167. ©2020 Bayer Group. All rights reserved.

January / February 2021

www.progressivecrop.com

29

Continued from Page 28 The choice of pruning method is largely influenced by fruitfulness characteristic of vine variety. For instance, most raisin varieties are cane pruned because their basal buds produce shoots with fewer and smaller clusters than apical buds (Fig. 1, page 28). In contrast, most wine varieties are spur pruned, since most wine varieties have adequate basal bud fruitfulness and spur pruning is less laborious and costly than cane pruning. However, cane pruning is sometimes preferred for certain wine varieties, like Carmenere, which have low basal bud fertility, or in cool climate regions where cool spring weather might reduce basal bud fruitfulness in other varieties. Understanding the factors determining the bud fruitfulness provides insight as to the best pruning practice for a given vineyard.

Figure 2: Timing of cluster differentiation in the primary bud along one 15-node cane of Thompson Seedless. Figure is elaborated from Williams 2000, Raisin Production Manual (UC ANR Publication 3393).

Figure 3: Bud fruitfulness generally correlates with the light exposure. Note different varieties respond to light exposure differently. Figure is elaborated from Sanchez and Dokoozlian 2005, American Journal of Enology and Viticulture. 56: 319-329.

30

Progressive Crop Consultant

January / February 2021

Grapevine yield is formed over a two-year cycle that begins with the initiation of cluster primordia within compound buds. Cluster primordia are initiated in basal buds first, around bloom time, with more apical buds forming cluster primordia in succession, and most buds having formed whatever cluster primordia they will have by veraison (Fig. 2). Sunlight promotes cluster initiation, so sunny, warm weather between bloom and veraison helps maximize cluster primordia formation, whereas cool and cloudy weather can lead to less fruitful buds (Fig. 3). Because basal buds tend to form cluster primordia earlier than the apical buds, spring weather can have a greater impact on the fruitfulness of some varieties than others. For example, cane-pruned varieties initiate cluster primordia over a longer time period than spur-pruned varieties.

Raisin growers have long been advised to retain “sun” canes, which generally have more fruitful buds than “shade” canes. Cane and spur morphology can also indicate potential fruitfulness. Mature, round canes and spurs having moderate thickness and internode length are often the most fruitful.

Narrow canes and spurs often indicate weak growth with inadequate starch

content to support cluster primordia formation. In contrast, exceptionally thick canes with long internodes and a flattened shape, commonly referred to as “bull” canes, may also be expected to have poor fruitfulness. Stressed vines may have insufficient carbohydrate content to support maximum bud fruitfulness. Insufficient water, inadequate nutrition and poorly managed pest or disease issues (e.g. nematodes and powdery mildew) can all stress the vines and reduce bud fruitfulness. As previously mentioned, node position also affects fruitfulness, cluster size and fruit quality of cane-pruned varieties.

Leaving longer canes could increase yields if the vines do not become overcropped.

Cluster initiation is generally completed by veraison, so, by late summer, the number of clusters a designated bud may have in the following season has already been determined. Therefore, before pruning, growers can collect and dissect representative buds from a vineyard and observe and count the cluster primordia with the aid of a dissecting microscope. This information may be used to help predict yield potential and adjust their pruning severity to help achieve a desired number of clusters per vine. As growers gain experience with this method, it might also help them adjust their canopy or irrigation management practices to help improve fruitfulness, since shoot exposure to light improves bud fruitfulness.

After a pruning strategy has been decided on, and the vines were pruned, the maximum potential number of clusters per vine has been fixed. One of the main goals of pruning is to retain the optimal number of buds per vine to regulate the crop size. If too many buds are retained after pruning, the vines may become overcropped, leading to poor canopy growth, unripe fruit and possible carry-over effects on the following year, resulting in erratic and delayed budbreak, slow canopy growth and poor yield and fruit quality. In con-

Top left: Dead arms/cordons on vines with trunk disease. Top right: Botryosphaeria canker on trunk cross section. Bottom left: Esca symptoms on grape leaf. Bottom right: Eutypa dieback symptoms on grape (photos courtesy G. Zhuang.)

Is your irrigation strategy really working?

Top growers don’t guess— they know.

MEASURE ORCHARD HEALTH, IDENTIFY TRENDS, AND TRACK YOUR PROGRESS

Learn more at

ceresimaging.net/progressivecrop

Continued on Page 32 January / February 2021

www.progressivecrop.com

31

Continued from Page 31 trast, if too few buds are retained, the vines may be undercropped, resulting in suboptimal yield and excessive canopy growth, which can cause self-shading, reducing fruit quality. Therefore, understanding bud fertility and potential crop load can help inform pruning decisions and thereby optimize yield and quality.

Disease Management

Double pruning on wine grape with long spurs retained after the first pass. A second pass with a field crew will prune the spurs back to two buds (photo courtesy G. Zhuang.)

Beat the Heat & Care for Your Crops with:

Anti-Stress 550 ®

Frost & Freeze

Additional Environmental Stress Conditions that the product is useful for:

• High Temperatures & Extreme Heat • Drought Conditions • Transplanting • Drying Winds

What is Anti-Stress 550®?

A foliar spray that creates a semi-permeable membrane over the plant surface.

When to apply Anti-Stress 550®?

Optimal application period is one to two weeks prior to the threat of high heat.

When is Anti-Stress 550® most effective?

The coating of Anti-Stress becomes effective when the product has dried on the plant.

The drying time of Anti-Stress is the same as water in the same weather conditions.

*One application of Anti-Stress 550® will remain effective 30 to 45 days, dependent on the rate of plant growth, application rate of product and weather conditions.

559.495.0234 • 800.678.7377 polymerag.com • customerservice@polymerag.com Order from your PCA or local Ag Retailer / Crop Protection Supplier

32

Progressive Crop Consultant

January / February 2021

Pruning practices also have implications for grapevine trunk diseases, which can seriously reduce vineyard productivity. Trunk diseases are caused by different fungi including Esca or black measles, Botryosphaeria (Botryosphaeria canker), Eutypa lata (Eutypa dieback) and Phomopsis viticola (Phomopsis cane and leaf spot). All of these fungi can enter the vines through pruning wounds, especially after precipitation. After a fungal infection has been initiated, it grows toward the roots, slowly killing the vascular tissue, decaying the wood and eventually killing the vines. The typical symptoms from trunk-diseased vines are cankers, dead arms and cordons, and trunks, with vines collapsing in a few years.

The economic loss can be dramatic, and trunk diseases may significantly reduce the productive life of vineyards.

Pruning methods can affect the potential disease risk. Cane pruning typically has less trunk disease risk than spur pruning systems since cane pruning leaves fewer pruning wounds than spur pruning. The best mitigation strategy for trunk disease is prevention.

Selective pruning, sometime referred to as “vine surgery”, can remove infected wood, sometimes resolving an established infection. However, vine surgery is laborious and will not be effective unless all the diseased wood is removed.

Retraining may be needed to replace arms or cordons removed in surgery, and the surgery will result in large, open pruning wounds that could easily become infected if not protected with pruning protectants. The labor cost to renew the cordon or trunk is typically economically prohibitive in the San

Joaquin Valley, and it also does not offer the long-term solution, since those fungi can slowly reinfect the vine if complete elimination of diseased wood was not achieved by the vine surgery.

The current preventative measures include double pruning or delay pruning, pruning wound protection and vineyard sanitation.

Pruning wound protectants (mostly fungicides) are another option when double pruning or delayed pruning is impractical. Dr. Akif Eskalen, UC Davis, has been evaluating different pruning wound protectants in California since 2019, and the results from those trials can be found here: ucanr. edu/sites/eskalenlab/Fruit_Crop_Fungicide_Trials/. Fungicide efficacy is variable, but the application of pruning wound protectants before the rain event can help prevent the fungal infections.

However, pruning wound protectants cannot provide complete protection, and we still do not know how long the protection lasts after the spray. More than one spray might be needed if rain events occur more frequently after pruning.

Double pruning or delayed pruning helps prevent the exposure of final pruning wounds until February or March when most rain events finish and weather is warming. Less rain with warm weather helps the vines seal the pruning wounds and prevent the fungi entering through pruning cuts.

However, double pruning or delayed pruning does have some barriers for some growers to adopt (e.g. pre-pruner and labor availability). For growers who Vineyard sanitation should be also intecan adopt it, double pruning or delayed grated into the trunk disease managepruning offers an effective way to mini- ment plan. Because numerous fruiting mize trunk disease. bodies can be found on pruning debris left in the vineyard, complete destruction is desirable to reduce the source

Prevents Crown Gall, a serious plant disease that reduces yields and shortens the life of your trees, vines, and shrubs.

of inoculum and avoid new infections.

An extensive sanitation of the vineyard should be practiced, keeping the inoculum level as low as possible. This can be accomplished by pruning out all diseased wood, removing it from the vineyard and destroying it by burning or burying.

Recently, mechanical pruning has become more popular due to the increased cost and declining availability of farm labor. However, mechanical pruning may leave more than double the number of spurs per vine compared to traditional hand pruning. Delayed pruning or pruning wound protectants should be applied after pruning to reduce the risk of trunk disease. In all, trunk disease does not only affect this year or next year’s yield and general vine health, but also reduces the longevity of vineyard production life.

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

Eradicates galls on diseased plants. The only product that controls Crown Gall after tumors are formed.

nly O s sts ie Co enn ree!

P rT Pe

530.586.1561 | www.agbiochem.com | agbiochem9@gmail.com

January / February 2021

www.progressivecrop.com

33

The What, When and How Much for Applying Key Nutrients

By CRAIG MACMILLAN, Ph.D., Macmillan Ag Consulting and KRIS BEAL, Vineyard Team

T

he goal of fertilization for any crop is to ensure the optimum levels of nutrients are available to the plant at key stages in the growth cycle.

Balancing these factors is an art as well as a science. The first step is identifying what nutrients to apply. The second step is deciding how much fertilizer to apply.

The third step is choosing the best time to make the application.

Tissue Analysis

In an ideal world, all of the plant’s needs would be met by nutrients available from the soil. In wine grapes, however, soil tests are not a useful predictor of fertilizer needs as the vine’s uptake of nutrients is affected by soil chemistry such as pH and the dynamics of different soil types. Therefore, tissue analysis in the forms of leaf blade and petiole analysis are required. Tissue should be sampled twice per year. Bloom time petiole analysis describes the vine’s nutritional needs during the growing season. Tissue sampling at early veraison is useful for making decisions about macronutrient adjustments postharvest as nitrogen, phosphorus and potassium are all mobile in the vine between harvest and leaf fall.

Bloom time tissue analysis provides a good picture of shortages in micronutrients such as zinc, magnesium and boron. Leaf blades and petioles are separated and analyzed separately. For bloom time sampling, leaves should be selected opposite the first cluster, ideally at 50% bloom. When sampling at veraison, select the most recently 34

Progressive Crop Consultant

matured leaf — usually the fifth or so leaf from the tip. The most important things to consider are sampling at the same time each year and accurately reflecting variation within the block.

Tissue analysis results need to be interpreted in the context of other information. Are vines exhibiting symptoms of a nutrient deficiency or excess? What is the overall vegetative growth of the vine? Is fruit set less than desired or uneven? Nutrient deficiencies are relatively easy to spot, but not always easy to diagnose. Tissue analysis will identify or confirm what those deficiencies are.

Assessing vegetative growth is relatively easy. These data are only meaningful when compared year to year, so several years of data collection may need to be conducted before the relationship between fertilizers applied and their effects can be identified.

Therefore, record keeping is an important part of making fertilizer decisions.

Information including tissue analysis and fertilizer applications from previous years provide insight into how in-season and post-season fertilizer applications affected nutrient status over time. Data on pruning weights and estimates of canopy growth at bloom can also show trends suggesting whether too much or too little nitrogen is being supplied.

Fertilizer Rates

As every vineyard and every block within a vineyard is different, the only way to accurately (i.e. efficiently) deterJanuary / February 2021

mine amounts of nutrients to apply is to adjust published ranges for the deficiency or excess of nutrients based on personal experience. Translating tissue analysis results into specific amounts of fertilizer to apply is not an exact science. Differences in soil can have a sizable impact on nutrient uptake and, therefore, fertilizer requirements between areas. Consider flagging rows or using GPS coordinates to sample the same areas. Year to year comparisons will tell you if your fertilizer decisions are accurate and effective.

Nitrogen and potassium are the primary nutrients that need to be supplied with fertilizers, although phosphorus and calcium are also important. Both have downsides if oversupplied, however. Excess N results in excessive growth and overcropping while excess K yields an unacceptably high pH in the juice at harvest. Replacing minerals is very important as they are transported off-site in the crop and not recycled back into the soil like leaves or canes.

Every situation is different, but believable ranges are 3 to 5 pounds N, 5 to 8 pounds K, and 1 to 2 pounds Ca are removed from the vineyard each year.

Most of these nutrients are taken up by the vine during the postharvest period if they are available.

Grapevines are composed of 1 to 2% N. 30% of N that the vine uses is taken up during the period between harvest and leaf fall. The same is true for K, although the rate of uptake drops

Continued on Page 36

Apply less, expect more?

There’s nothing quite like California agriculture, and successful growers need a nutrition plan that meets the unique goals, climate and challenges we face.

Get precisely the advanced products and agronomic knowledge you need to support your crops, your soil and a sustainable future.

Find an AgroLiquid dealer near you.

AgroLiquid.com

Sure-K® and Kalibrate® are registered trademarks and PrG is a trademark of AgroLiquid. © 2020 AgroLiquid. All Rights Reserved.

™

Continued from Page 34 off dramatically about a month after harvest. N is an important requirement for the production and function of proteins and is a major component of chlorophyll. Wine grapes will consume 40 to 50 pounds N per acre during the growing season. Much of this will be returned to the soil in the form of prunings and leaves, but the breakdown of pruning wood into bioavailable forms of N takes years, and much may be lost as nitrous oxide during the process. N is released from soil organic matter at the rate of approximately 20 lbs/acre/percent organic matter. Therefore, on soils with less than 2% organic matter, the rate of N provided through fertilization should be increase by 10 to 20%. On soils with greater than 3% organic matter, consider reducing the amount of N delivered. Nitrate levels in irrigation water can be meaningful contributors to total N supplied to the vine. In some areas of California,

nitrate levels are high enough that they could be considered fertilizers.

Rates of N application in wine grapes vary from 0 to as much as 60 pounds per acre per year. Making decisions about the rate of nitrogen fertilizer to apply is complicated as excessive applications can result in nitrates leaching into groundwater and/or the generation of the greenhouse gas nitrous oxide. In leaf blades at bloom time, less than ~2% total N is considered deficient. N deficiency is expected with levels less than ~1.5% in leaf blades at veraison.

N may be applied in a split application, with half being applied just after berry set and the other half being applied postharvest. In-season applications of N may not be necessary at all depending on the results of tissue analysis. This is an especially important consideration given that too much N in the vine during the growing season can result in excessive growth, shading inside the canopy and higher disease incidence. To avoid this, spoon feeding vines during the growing season can afford more control.

K uptake is negatively affected by high magnesium in the soil. Therefore, even if K is plentiful in the soil, additional K may need to be provided to avoid deficiency. K levels are deficient below 1% in both petiole and leaf blades during the spring and ~0.7% in the fall.

A reasonable target is 2 to 3%.

The goal of postharvest fertilization is to deliver N, K and Ca to the root zone during a time when the vines will take up the nutrient and store them in the trunk so that they are available when the vine breaks dormancy and the demand for these nutrients is the highest. For example, one study found

Advertorial

Fertilizer label on a storage tank (photo courtesy Jacob Hernandez, JH Ag Consulting.)

Everyone has heard the old saying, “Aglime works 1/3 each year for 3 years.” But where did this come from?

The research we rely on mainly comes from the Midwest where the aglime is much more coarse. In fact, the larger particle sizes 4, 8 & 30 mesh are ineffective within 3 years.

Pictured are actual aglime samples taken from Blue Mtn, CA (on the left) and Nokomis, IL. Each compartment has a mesh under it, the number indicates the size. The material above is retained on that mesh size, the material below is smaller. Particle size determines how quickly an aglime reacts, the old saying is not an accurate way to describe aglime’s efficiency.

Ask for it by name Blue Mountain Minerals Naturally the Best!

For more information 209-533-0127x12

36

Progressive Crop Consultant

Timing Application

January / February 2021

that 50% of N in the canopy comes from N which had been stored in the trunk and roots of the vine. Timing is critical. Too soon and N may kick off a new flush of growth and delay dormancy. Too late and the vine is no longer moving water into the trunk.

The canopy needs to be healthy and functional. Hitting this window with late ripening varieties may be difficult, especially if a frost knocks the leaves off. Also, care must be exercised in cold areas because excessive N postharvest can cause hardiness issues. Fertigation is the preferred method of delivering N and K fertilizers as foliar applications can result in an overly rapid uptake.

Also, there needs to be sufficient soil moisture for vine roots to take up the elements.

The amount of time required for vines to restore their carbohydrate and mineral reserves varies by crop load. Vineyards with a crop load of 2 to 4 tons per

acre need very little time to recover and restore after being harvested. Vineyards in the 4 to 8 tons per acre range require about a month for restoration.

Vineyards cropped above eight tons per acre need between 4 and 8 weeks to build their reserves back up.

A Note on Compost

A grower may want to apply compost to their vines for multiple reasons, including delivering nutrients, inoculating the soil with microbes, increasing soil organic matter and improving soil structure. When using compost as a fertilizer, one must know the chemical analysis of the material and take into account the range of nutrients compost will contribute to the vine, including but not limited to P and K. Good quality, finished compost will have a C:N ratio of less than 20:1. Of the total N per ton in the compost, about 30% is available to the vine. Of that, approximately half is available the first year

after application, with the remaining N becoming available over the next three to four years.

Although grapevines can survive in depleted soils, maintaining adequate crop loads and vine health requires replacing the elemental nutrients removed in fruit and to account for the long time required to recycle N and K from prunings and leaves back into the soil.

A successful fertilization program provides enough of the required elements without producing excessive growth, high juice pH or generating pollution.

Scientific data and historical records combined with experience can achieve the goals of the fertilizer program.

Thanks to Dan Rodrigues of Vina Quest LLC for his contribution to this article.

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

Helping Farmers Grow NATURALLY Since 1974

FEATURING:

Office: 559-686-3833 Fax: 559-686-1453 2904 E. Oakdale Ave. | Tulare, CA 93274 newerafarmservice.com

January / February 2021

www.progressivecrop.com

37

Pierce’sinDisease

GRAPEVINE

Identification and Control of Insect Vectors is Crucial to Control

By KARL T. LUND, UCCE Area Viticulture Advisor

P

ierce’s disease is caused by the bacterium Xylella fastidiosa. These bacteria live within xylem, the vascular tissue through which water travels in a plant. As the bacteria population grows, it stimulates the plant to produce tyloses. The combination of bacteria and tyloses cause vessel plugging, which restricts water movement in the plant, thus causing many of the disease symptoms. These blockages will eventually lead to the vine’s death. It is estimated that Pierce’s disease costs the California grape industry $56.1 million a year in lost productivity (Tumber et al., 2014).

To minimize losses, it is important to understand the biology of the disease, including the bacteria’s host range, how the bacteria moves from plant to plant, and how to identify infected plants will help growers prevent losses and control the disease.

About the Bacterium

The bacterium X. fastidiosa has a large known host range. The European Food Safety Authority maintains a database of known hosts for X. fastidiosa (their updated list approved in April 2020 can be found at doi.org/10.2903/j. efsa.2020.6114.) Research done throughout California has identified many hosts, including weeds such as shepherd’s purse (Capsella bursa-pastoris), filaree (Erodium spp.), cheeseweed (Malva parvifolia), burclover (Medi38

Progressive Crop Consultant

cago polymorpha) and annual bluegrass (Poa annua) among many others (Shepland et al., 2006 and Costa et al., 2004). Overall, at least 350 host plants have been identified from over 75 plant families as hosts for X. fastidiosa. From a control standpoint, once X. fastidiosa has been introduced to a geographic area, it will be virtually impossible to eliminate it from that location with such a wide variety of possible hosts.

X. fastidiosa does have another level of complexity. To date, four distinct subspecies of X. fastidiosa have been identified. X. fastidiosa ssp. fastidiosa is the subspecies that causes Pierce’s disease in grapevine, while X. fastidiosa ssp. multiplex is the subspecies that causes almond leaf scorch (Rapicavoli et al., 2018). This does mean that almond trees with almond leaf scorch would be unable to be the source of Pierce’s disease in a vineyard. To narrow down the definitive host range, grape-specific PD (X. fastidiosa ssp. fastidiosa) was inoculated into a range of possible host plants using glassy-winged sharpshooters as a vector. After an incubation period, multiple positive ELISA results were obtained for several plants including black mustard (Brassica nigra), black sage (Salvia mellifera), mirror plant (Coprosma repens), Spanish broom (Spartium junceum), Mexican elder-

January / February 2021

berry (Sambucus mexicana), almond (Butte) (Prunus dulcis), white sage (Salvia apiana), sycamore (Platunus racemose) and coast live oak (Quercus agrifolia), confirming that they could host the bacteria (Costa et al., 2004).

This does ultimately lower the number of possible plant hosts for X. fastidiosa ssp. fastidiosa; however, it still includes a long list of common plants found in and around vineyards, enough that even including this reduced host list, managing only these species, and other hosts yet to be identified, is still outside the ability in most growing regions.

Insect Vectors

Bacteria within the xylem tissue of one plant may be spread to another plant through the feeding activities of certain xylem-feeding insects. In vineyards, two groups of insects have been identified as possible vectors: sharpshooters and spittlebugs. Spittlebugs have been shown to vector X. fastidiosa in controlled settings, but their importance as a Pierce’s disease vector in vineyards is unclear. Sharpshooters, on the other hand, are known to be effective vectors of Pierce’s disease in vineyards.

There are several different sharpshooters in California that vector X. fastidiosa. The most important of these in

Continued on Page 40

Reduce Crop Damage The Best Hardware. The Best Pheromone.

Suterra’s Puffer® is the most reliable aerosol pheromone emitter on the market. That means consistent pest control for your growers and zero maintenance for you.

Choose Suterra’s Puffer®, the #1 season-long choice of PCAs. • Faster to deploy • Drop-resistant • Single-button operation • No user programming necessary • Zero clog design keeps out water and debris • Zero pre-harvest interval and zero MRL

Available in California for Navel Orangeworm, Oriental Fruit Moth, and Codling Moth

541-388-3688

www.suterra.com/puffer January / February 2021

www.progressivecrop.com

39

From left to right: green, red-headed and glassy-winged sharpshooters. Size comparison measurements are in the bottom right of each individual image (photos by Jack K. Clark, Regents of the University of California.)

Images of glassy-winged sharpshooter. A. Top view of adult glassy-winged sharpshooter. B. Side view of adult glassy-winged sharpshooter. C. Top view of young nymph glassy-winged sharpshooter. D. Side view of late-stage glassy-winged sharpshooter (photos by K.T. Lund, UCCE.)

Continued from Page 40 the coastal portions of California is the blue-green sharpshooter. This sharpshooter is not adapted to the hotter climate of the San Joaquin Valley (SJV).

In the SJV, there are three other sharpshooters: the green sharpshooter (Draeculacephala minerva), the red-headed sharpshooter (Xyphon fulgida) and the glassy-winged sharpshooter (Homalodisca vitripennis).

Green and Red-Headed Sharpshooter The green sharpshooter and the red-headed sharpshooter are both small and prefer to feed on grasses. The red-headed sharpshooter is specifically drawn to and reproduces on Bermu-

40

Progressive Crop Consultant

dagrass. Both the green and red-headed sharpshooter can be found in irrigated pastures and along waterways such as streams, creeks, canals and ditches.

Neither of these sharpshooters prefers to feed on grapevines, however they may do so under certain conditions and thus transmit Pierce’s disease. Since they don’t prefer grapevines, they tend not to spread deeply into vineyards; thus, when these vectors transmit Xylella, it is usually only to grapevines along the edges of a vineyard, whereas vines in the middle or the sides away from the green or red-headed sharpshooters’ preferred habitat are not affected.

January / February 2021

Glassy-Winged Sharpshooter The glassy-winged sharpshooter is twice the size of either of the other two sharpshooters. Their large size makes them more effective as a vector for Pierce’s disease because they can travel further than smaller sharpshooters and feed more effectively on a wider variety of plants, including woody plants such as grapes. To date, over 350 plants have been identified as hosts of glassywinged sharp shooter (cdfa.ca.gov/ pdcp/Documents/HostListCommon. pdf). Many of the hosts for glassywinged sharpshooters are also hosts for X. fastidiosa. One of the key hosts for both glassy-winged sharpshooters and X. fastidiosa in the SJV, and for local control of Pierce’s disease, is citrus.

The large feeding range of the glassywinged sharpshooter also means that it can spread the disease throughout the vineyard instead of just to the edges.

The glassy-winged sharpshooter is not a native California insect, only arriving in California in the late 1980s (first recorded in 1989). As this non-native pest is such a dangerous vector, the CDFA tracks their distribution. Most of Kern county, parts of Tulare and Fresno counties, and a very small sliver of Madera county just over the San Joaquin River are all hosts to naturalized populations of glassy-winged sharpshooters within the SJV. In SoCal, Ventura, Los Angeles, Orange, San Bernardino, Riverside and San Diego counties as well as portions of Santa Barbara county and a small section of Imperial county all play host to endemic populations.

Identification of glassy-winged sharpshooters within and near these areas is important for controlling their spread as well as the spread of Pierce’s disease.

At the top, the insect has a deep brown color with creamy white dots on the head and thorax. These colors and dots continue onto the abdomen; however, here they are covered with transparent wings (the source of their glassy name).

Highlighting the glassy wings are red lines and patches which can be seen from both the top and side.

N AV E L OR A NG E WOR M M ON I T O R I NG S Y S T E MS

EXCEPTIONAL

FOURSOME 0 OPTIMUM DETECTION 0 NEW! Multi-Gender Attractant System: PHEROCON ® NOW PPO-HR L2 ™+ NOW L2 ™ Lures

Male Attractant System: PHEROCON ® NOW L2 Lure

CDFA map for April 2020 of glassy-winged sharpshooter distribution in California (photo courtesy CDFA.)

The other main identifying mark is the flat white marking along the side of the of the abdomen. When sitting on a stem, this white mark stands out under and through the wings of this sharpshooter. Younger nymph glassy-winger sharpshooters have yet to develop their namesake wings. Their bodies are a lighter grayish-brown with very small white dots. In this stage, the standout feature is their red eyes. The red is the same color that will soon highlight the parent’s wings.

+

PHEROCON 1CD QUICK-CHANGE™ Trap

PHEROCON VI Delta Trap

Female Attractant System: PHEROCON ® IV NOW PHEROCON IV NOW Egg Trap

Later-stage nymphs have started to transition to the adult body color, and the red color in the eye is mostly lost.

However, the red color has transitioned onto the wing pads in a pattern that has started to develop the adult wing’s patterning.

Vector Monitoring and Treatment

Monitoring for glassy-winged sharpshooters can be done using yellow sticky cards. It is recommended to use cards that are at least 5.5” x 9” in size. One card should be placed for every 10 acres and checked weekly for recent activity. Monitoring should be done from budbreak through November. If a glassy-winged sharpshooter is

Continued on Page 42

NEW! Predator Detection System: PHEROCON ®PREDATOR ™ Trap PHEROCON PREDATOR Trap

Brad’s Monitoring Program

LEARN MORE

— Brad Higbee, Field R&D Mgr, Trécé, Inc ®

INCORPORATED INSECT PHEROMONE & KAIROMONE SYSTEMS

Your Edge – And Ours – Is Knowledge.

trece.com © 2021, Trécé Inc., Adair, OK USA • TRECE, PHEROCON and CIDETRAK are registered trademarks of Trece, Inc., Adair, OK USA • TRE-1870, 12/20

January / February 2021

www.progressivecrop.com

41

Continued from Page 41 found, and you are outside of a known population center, please contact your local agriculture commissioner’s office or cooperative extension office. Green and red-headed sharpshooters are not attracted to yellow sticky cards, so to monitor their populations you will need to use a sweep net. Sweep lush green grasses near and within your vineyard in April and May to assess population size.

Pierce’s disease leaf symptoms. Leaf margins turn yellow (or red in red varieties) then burn back from the margins to center in patches (photo by K.T. Lund, UCCE.)

For both green and red-headed sharpshooters, finding two adults in 50 sweeps warrants a response. Unfortunately, as both sharpshooters are only incidentally on grapevines, treating the grapevines will not help the situation. The preferred habitat (lush grassy areas) will need to be addressed. Due to the overlapping generations seen in these sharpshooters, insecticide treatments are often ineffective. Removal of preferred habitat is a more effective treatment option for these sharpshooters.

For glassy-winged sharpshooters, a single find warrants a response. A list of treatment options for glassy-winged sharpshooters can be found on the UC IPM webpage at ipm.ucanr.edu/PMG/ r302301711.html. The most common insecticides used for glassy-winged sharpshooter control contain the active ingredient imidacloprid. As with all chemical control, it is important to rotate active ingredients regularly.

Pierce’s disease symptom on shoots. Patchy bark maturation on current year’s shoots leaving green islands (photo by K.T. Lund, UCCE.)

Research conducted in 2017 showed that several other insecticides had long-term control of glassy-wing sharpshooters. These included Sivanto (a.i. Flupyradifurone) and Assail (a.i. Acetamiprid), which still showed greater than 90% mortality 7 weeks after application; Actara (a.i.

Thiamethoxam), which still showed greater than 90% mortality 5 weeks after application; Harvanta (a.i. Cyclaniliprole), which still showed greater

Table 1: California Laboratories that offer Pierce’s disease testing.

42

Progressive Crop Consultant

January / February 2021

than 90% mortality 4 weeks after application; and Sequoia (a.i. Sulfoxaflor), which still showed greater than 90% mortality 3 weeks after application (Haviland and Rill 2019). This research was conducted in citrus because relying on vineyard-only management is not enough for glassy-winged sharpshooters. With the larger range of the glassywinged sharpshooter, it is important to focus on an area-wide approach. A pilot program with cooperation between grape and citrus growers has shown great promise in Kern county. Citrus groves are a primary overwintering spot for glassy-winged sharpshooters.

When treatments can be applied to these locations, it can lower the number of glassy-winged sharpshooters and, thus, the presence of PD in the area.

References

Costa, H. S., Raetz, E., Pinckard, T. R., Gispert, C., Hernandez-Martinez, R., Dumenyo, C. K., and Cooksey, D. A. 2004. Plant hosts of Xylella fastidiosa in and near southern California vineyards.

Plant Dis. 88:1255-1261.

Shapland, E. B., Daane, K. M., Yokota, G. Y., Wistrom, C., Connell, J. H., Duncan, R. A., and Viveros, M. A. 2006.

Ground vegetation survey for Xylella fastidiosa in California almond or orchards.

Plant Dis. 90:905-909.

Haviland, D. and Rill, S. 2019 Evaluation of glassy-winged sharpshooter mortality following exposure to aged insecticide residues, 2017. Arthropod Management Tests, 44(1), 1–1. doi: 10.1093/amt/tsz075

Tumber, K. P, Alston, J. M, & Fuller, K. 2014. Pierce’s disease costs California $104 million per year. California Agriculture, 68(1-2)

Rapicavoli, J., Ingel, B., Blanco-Ulate, B. Cantu, D. and Roper, C. 2018. Xylella fastidiosa: an examination of a re-emerging plant pathogen. Mol. Plant Pathol., 19(4), 786–800

Comments about this article? We want to hear from you. Feel free to email us at article@jcsmarketinginc.com

Vine Infections

Early identification of infected vines is the final step in preventing a larger problem from Pierce’s disease. Infected vines can be a source of the disease for vectors to spread to neighboring vines.

They are also a strong indicator that the bacteria and a vector are present in your location.

The leaves of infected vines will turn yellow (for green varieties) or red (for red varieties) along the margins. This discoloration will then work inwards from the margin, with the discoloration quickly turning to brown/dried dead tissue. This often happens unevenly or in sections. Shoot tissue also shows an uneven maturation process, leaving green islands within lignified brown tissue.

Affected leaves eventually fall off, but will sometimes leave the petiole still attached to the shoot. Not all these symptoms will be found on every infected vine. If you suspect a vine is infected with Pierce’s disease, you can contact your county’s viticulture advisor for corroboration. Ultimately, a diagnostic analysis is required to confirm the presence of X. fastidiosa in the suspected vine. Table 1 lists laboratories within California that offer Pierce’s disease testing.

MOCKSI® PLANT GROWTH REGULATOR

With increasing guidance from almond processors to limit double kernels, trust the nut retaining AND yield increasing power of MOCKSI™ PLANT GROWTH REGULATOR!

Rather than increasing the length of bloom, which increases the probability of double kernel nuts; MOCKSI® acts on the tree to promote increased auxin production which leads to improved attachment of the hull to the stem, thereby lessening drop leading to increased yields at a MUCH lower cost than the alternative.

Begin your planning for 2021’s almond bloom now, understand the benefits of a MOCKSI® application and be ready for a strong 2021!

Kim-C1, LLC Contact Ben Letizia at 559-284-1392 or benl@kimc1.com for more information ©2020 Kim-C1, LLC. All rights reserved. MOCKSI and Kim-C1, LLC logo are registered trademarks of Kim-C1, LLC. Always read and follow label directions. 559-228-3311

January / February 2021

www.progressivecrop.com

43

Go boldly into every battle.

Including the one for your crops.

They say farming is tougher than ever — like you didn’t already know that. You also know that allies still matter in the fight to protect crops. Allies like Atticus. We make branded-generic herbicides, fungicides and insecticides you can count on, and back them up with the expertise necessary for victory. Fierce times call for fierce partners. Find yours at AtticusLLC.com.

ATTICUSLLC.COM

©2020 Atticus. Important: Always read and follow label instructions.

44

Progressive Crop Consultant

January / February 2021