Indoor unit
0CVP0-02B(Replaces:0CVP0-02A)
LG Airconditioners Product Data
(R410A)
• Introduction • General Information • Indoor Units
Introduction 1. Preface R410A Model is the most favored choice when there is a need for precise air conditioning of relatively big projects extending from Multi-Room structure to big commercial places. We have a big line up, that offers wider flexibility of model selection. Equipped with inverter technology and long piping installation, the product matches well if one talk about optimum power consumption in high rise buildings. Add on capacity feature makes it easy to upgrade the existing capacity at any time. With the growing concern about environment preservation, comes with R410A refrigerant which is environment friendly and thus our system is a high technology and environment friendly product.
Unique refrigerant flow and electronic circuit control gives this system an unique capability to work in extreme/abnormal working conditions making our customer feel great about their decision of selecting LG as their first choice. This publication provides a detailed and in depth information about the design and installation of . We hope that with this information you would become an expert of your
system.
Air-Conditioning Company
2. Step by Step (1)
(2)
System Selection Process
Calculate or obtain the maximum heat load for the area(s) to be air conditioned
Decide the indoor unit specifications Decide the outdoor unit specifications Capacity coefficient factor Decide the air velocity and temperature distributions
(3)
(4)
Selection of refrigerant pipe joints and headers
Selection of the control system Control wiring method Description of devices
(5)
Electrical wiring Electric characteristics Field wiring
Caution 1. Air conditioners should not be installed in areas where corrosive gases such as acid gas or alkaline gas is produced. 2. If the outdoor unit is installed close to the sea shore, direct exposure to the sea breeze should be avoided and choose an outdoor unit with anti-corrosion treatment.
General Information 1. Model Names 2. External Appearance 3. Nomenclature 4. Indoor Unit Capacity Index
General information
1. Model Names Category
Capacity(Btu/h(kW))
Chassis Name
5k (1.6)
9k (2.8)
12k (3.6)
15k (4.5)
Mirror
ARNU18 ARNU24 GS8*2 GS8*2
S8 SF
1 Way
TJ
2 Way
TL TR
Ceiling
ARNU07 ARNU09 ARNU12 GSF*2 GSF*2 GSF*2 ARNU07 ARNU09 ARNU12 GTJ*2 GTJ*2 GTJ*2 ARNU18 ARNU24 GTL*2 GTL*2 ARNU05 ARNU07 ARNU09 ARNU12 GTR*2 GTR*2 GTR*2 GTR*2 ARNU15 ARNU18 GTQ*2 GTQ*2
TQ
Cassette 4 Way
ARNU24 ARNU28 GTP*2 GTP*2
TP
ARNU36 GTN*2
TN
ARNU42 ARNU48 GTM*2 GTM*2
TM BH High Static Ceiling Concealed Duct
ARNU07 ARNU09 ARNU12 ARNU15 ARNU18 ARNU24 GBHA2 GBHA2 GBHA2 GBHA2 GBHA2 GBHA2 ARNU28 ARNU36 ARNU42 GBGA2 GBGA2 GBGA2
BG
ARNU48 GBRA2
BR
URNU76 URNU96 GB8A2 GB8A2
B8 B1 Low Static
ARNU07 ARNU09 ARNU12 ARNU15 GB1G2 GB1G2 GB1G2 GB1G2 ARNU18 ARNU24 GB2G2 GB2G2
B2 B3 Built In
ARNU07 ARNU09 ARNU12 ARNU15 GB3G2 GB3G2 GB3G2 GB3G2
B4
Ceiling & Floor
VE
Ceiling Suspended
VJ CE
With Case
ARNU18 ARNU24 GB4G2 GB4G2 ARNU09 ARNU12 GVEA2 GVEA2 ARNU18 ARNU24 GVJA2 GVJA2 ARNU07 ARNU09 ARNU12 ARNU15 GCEA2 GCEA2 GCEA2 GCEA2 ARNU18 ARNU24 GCFA2 GCFA2
CF
Floor Standing Without Case
28k 36k 42k 48k 76k 96k (8.2) (10.6) (12.3) (14.1) (22.4) (28.0)
ARNU07 ARNU09 ARNU12 ARNU15 GSE*2 GSE*2 GSE*2 GSE*2
SE
Gallery
24k (7.1)
ARNU18 ARNU24 GS5*2 GS5*2
S5
ART COOL
18k (5.6)
ARNU07 ARNU09 ARNU12 ARNU15 GSE*2 GSE*2 GSE*2 GSE*2
SE
Wall Mounted (General)
7k (2.2)
CE
ARNU07 ARNU09 ARNU12 ARNU15 GCEU2 GCEU2 GCEU2 GCEU2
CF
ARNU18 ARNU24 GCFU2 GCFU2
❈ *ART COOL- SE/S8( * R:Mirror, V:Silver, B : Blue), SF(* E:Red, V:Silver, G:Gold , 1: Kiss (Photo changeable)) *Wall Mounted- A: Basic, L:Plasma *Ceiling Cassette- A: Basic, C:Plasma
General information
1
2. External Appearance Ceiling Cassette- 1Way
Ceiling Cassette -2Way
ARNU07GTJ*2 ARNU09GTJ*2 ARNU12GTJ*2
ARNU18GTL*2 ARNU24GTL*2
* A:Basic, C:Plasma
* A:Basic, C:Plasma
Ceiling Cassette- 4Way
Ceiling Concealed Duct - High Static
ARNU05GTR*2 ARNU07GTR*2 ARNU09GTR*2 ARNU12GTR*2 ARNU15GTQ*2 ARNU18GTQ*2
ARNU07GBHA2 ARNU09GBHA2 ARNU12GBHA2 ARNU15GBHA2 ARNU18GBHA2 ARNU24GBHA2 ARNU28GBGA2
ARNU24GTP*2 ARNU28GTP*2 ARNU36GTN*2 ARNU42GTM*2 ARNU48GTM*2
ARNU36GBGA2 ARNU42GBGA2 ARNU48GBRA2 URNU76GB8A2 URNU96GB8A2
* A:Basic, C:Plasma
Ceiling Concealed Duct - Low Static
Wall Mounted
ARNU07GB1G2 ARNU15GB1G2 ARNU09GB1G2 ARNU18GB2G2 ARNU12GB1G2 ARNU24GB2G2
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2
ARNU15GSE*2 ARNU18GS5*2 ARNU24GS5*2 * A:Basic, L:Plasma
Ceiling Concealed Duct – Built-in
ART COOL Gallery
ARNU07GB3G2 ARNU09GB3G2 ARNU12GB3G2
ARNU07GSF*2 ARNU09GSF*2 ARNU12GSF*2 * E:Red V:Silver G:Gold 1: Kiss (Photo changeable)
ARNU15GB3G2 ARNU18GB4G2 ARNU24GB4G2
ART COOL Mirror ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2 ARNU18GS8*2 ARNU24GS8*2
*R:Mirror V:Silver B:Blue
Ceiling & Floor ARNU09GVEA2 ARNU12GVEA2
Ceiling Suspended ARNU18GVJA2 ARNU24GVJA2
2
Floor Standing With case ARNU07GCEA2 ARNU09GCEA2 ARNU12GCEA2 ARNU15GCEA2 ARNU18GCFA2 ARNU24GCFA2
Without case ARNU07GCEU2 ARNU09GCEU2 ARNU12GCEU2 ARNU15GCEU2 ARNU18GCFU2 ARNU24GCFU2
General information
3. Nomenclature ARN
U
07
G
TJ
A
2 Serial Number Combinations of functions A:Basic function L:Neo Plasma(Wall Mounted) C:Plasma(Ceiling Cassette) G: Low Static U : Floor Standing without Case ART COOL Type Panel Color SE/S8 - R:Mirror V:Silver B:Blue SF - E:Red V:Silver G:Gold 1: Kiss (Photo changeable) Chassis Name Electrical Ratings 1:1Ø, 115V, 60Hz 2: 1Ø, 220V, 60Hz 6:1Ø, 220 ~ 240V, 50Hz 7: 1Ø, 100V, 50/60Hz G:1Ø, 220 ~ 240V, 50Hz / 220V 60Hz Total Cooling Capacity in Btu/h EX) 5,000 Btu/h➞'05' 18,000 Btu/h➞'18' Combination of Inverter Type and Cooling Only or Heat Pump N: AC Inverter and H/P V: AC Inverter and C/O U: DC Inverter and H/P and C/O System with Indoor Unit using R410A ❈ LGETA:U Ex) URN
General information
3
4. Indoor Unit Capacity Index INDOOR UNIT CAPACITY INDEX Unit Capacity (Btu/h)
5k
7k
9k
12k
15k
18k
24k
28k
36k
42k
48k
76k
96k
Capacity Index
1.6
2.2
2.8
3.6
4.5
5.6
7.1
8.2
10.6
12.3
14.1
22.4
28
â?ˆ Capacity Index is same as the capacity(kW).
4
General information
Indoor Units
Ceiling Cassette 2-Way Ceiling Cassette 4-way Ceiling Concealed Duct(High Static) Ceiling Concealed Duct(Low Static) Ceiling Concealed Duct(Built in) Wall Mounted ART COOL Mirror ART COOL Gallery Ceiling & Floor/Ceiling Suspended Floor Standing
Cassette 1-way
Ceiling Cassette 1-Way
Cassette 1-way
Ceiling Cassette 1-Way
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Cassette 1-way
1. List of Functions Category
Air flow
Installation
Reliability
Convenience
Individual control
Special function kit
Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GTJ*2, ARNU09GTJ*2, ARNU12GTJ*2 1 Auto O 4/5/4 X O O X Option O O O X O O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory X Accessory -
Cassette 1-way
Air purifying
Function
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
Ceiling Cassette 1-way
1-1
2. Specifications
Cassette 1-way
* Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Body Dimensions (WxDxH) Front Panel Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Panel Color Panel Name(Acc'y)
Ø, V, Hz
1Way Ceiling Cassette ARNU07GTJ*2 ARNU09GTJ*2 ARNU12GTJ*2 2.2 2.8 3.6 1,900 2,400 3,100 7,500 9,600 12,300 2.5 3.2 4.0 2,200 2,800 3,400 8,500 10,900 13,600 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate 860x410x138 860x410x138 860x410x138 33.8x16.1x5.4 33.8x16.1x5.4 33.8x16.1x5.4 1,070x480x20 1,070x480x20 1,070x480x20 42.1x18.9x0.8 42.1x18.9x0.8 42.1x18.9x0.8 2x9x21 2x9x21 2x9x21 0.13 0.13 0.13 Cross Flow Fan Cross Flow Fan Cross Flow Fan 20.0 20.0 20.0 0.20 0.20 0.20 7.5/6.5/6 7.5/6.5/6 8/7/6 265/229/212 265/229/212 283/247/212 Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Fuse Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) 25.0 25.0 25.0 11.5(25.4) 11.5(25.4) 11.5(25.4) 40/38/37 40/38/37 41/39/37 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog Morning fog PT-HJ*
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are Net Capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
1-2
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Cassette 1-way
138
83
19.1 16.5
198.8
131
16.4
32.8
410 344.4
939
1070
Branch Duct Connection
961.2 860
2
4
3
1
30 36 50 83
Liquid pipe connection Gas pipe connection Air suction grill Air discharge grill
1 2 3 4
Unit size(7k, 9k, 12k):ø12.7
Unit size(7k, 9k, 12k):ø6.35
Descripition
(unit : mm)
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: TJ
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
Number
ARNU07GTJ*2 ARNU09GTJ*2 ARNU12GTJ*2
Cassette 1-way
Ceiling Cassette 1-way
480
Ceiling Cassette 1-way
3. Dimensions
110
1-3
173 151 100 56
242.5
Cassette 1-way
4. Piping Diagrams
Heat Exchanger
EEV
Filter
:Cooling :Heating
Th2
Th3 C.F.F.
Filter Th1
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Model
Gas
Liquid
Ø12.7(1/2)
Ø6.35(1/4)
ARNU07GTJ*2 ARNU09GTJ*2 ARNU12GTJ*2
1-4
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Cassette 1-way
5. Wiring Diagrams TJ Chassis
Cassette 1-way
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-D/PUMP CN-485 CN-DISP CN-EEV CN-VANE2 CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-CC CN-AIRC
LOCATION POINT AC Power supply Fan motor output Drain pump output Communication Display EEV Output Step motor Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Dry contact Air clean
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC AC output for drain pump Connection between indoor and outdoor Display of indoor status EEV Control output Step motor output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Dry contact line Air cleaner control Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Cassette 1-way
1-5
6. Capacity Tables
Cassette 1-way
6.1 Cooling Capacity
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.2 2.1 2.0
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.0
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
1-6
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Cassette 1-way
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
2.8
3.6
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7 2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2 2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Cassette 1-way
2.2
Heating capacity
Notes: TC: Total Capacity(kW)
Ceiling Cassette 1-way
1-7
7. Air Velocity and Temperature Distribution(Reference Data)
Cassette 1-way
ARNU07GTJ*2 Cooling
Heating
Discharge angle: 45°
Discharge angle: 60°
Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m 2.0 1.5
2m
2.0
2m
1.0 1.5
1m
1m 0.5
1.0 0.5 5m
4m
3m
2m
0m 0m
1m
Temperature [°C]
5m
4m
3m
2m
0m 0m
1m
Temperature [°C] 2.7m
2.7m 33 30
18 2m
20
2m 24
22
21
18
1m
1m
27
24 5m
4m
3m
2m
0m 0m
1m
5m
4m
3m
2m
0m 0m
1m
ARNU09GTJ*2 Heating
Cooling Discharge angle: 45°
Discharge angle: 60° Air velocity [m/s]
Air velocity [m/s]
2.7m
2.7m 2.0 1.5
2m
2m
2.0 1.0 1.5
1m
1m 0.5
1.0 0.5 5m
4m
3m
2m
0m 0m
1m
5m
4m
3m
2m
0m 0m
1m
Temperature [°C]
Temperature [°C]
2.7m
2.7m 33
18 20
2m
30
21
1m
22
24 4m
3m
2m
1m
0m 0m
5m
4m
1m
27
18
5m
2m
24
3m
2m
1m
0m 0m
Note: The standard setup height is 2.7m. Shown here is the measurement distribution at the ceiling height of 2.7m
1-8
Ceiling Cassette 1-way
ARNU12GTJ*2 Cooling
Heating Discharge angle: 60째
Discharge angle: 45째
Air velocity [m/s]
Air velocity [m/s]
2.7m
2.7m 2.0
2m 2.0
1m 1.0
1.0
0.5
0.5 4m
3m
Cassette 1-way
1.5 1m
1.5
5m
2m
2m
0m 0m
1m
5m
4m
3m
2m
0m 0m
1m
Temperature [째C]
Temperature [째C]
2.7m
2.7m 18 20
33 2m
30
21
22
2m
1m
1m 24
27
24 5m
4m
3m
2m
1m
0m 0m
5m
4m
3m
2m
1m
0m 0m
Note: The standard setup height is 2.7m. Shown here is the measurement distribution at the ceiling height of 2.7m
Ceiling Cassette 1-way
1-9
8. Electric Characteristics
Cassette 1-way
Units Model
Type
ARNU07GTJ*2
TJ
ARNU09GTJ*2
TJ
ARNU12GTJ*2
TJ
ARNU07GTJ*2
TJ
ARNU09GTJ*2
TJ
ARNU12GTJ*2
TJ
Power Supply Hz 50
60
Volts 220~240
220
Voltage Range MCA Max:264 Min:198 Max:242 Min:198
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
Symbols: MCA : Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA ≤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the larger value on the MCA. 5. Instead of fuse, use Circuit Breaker.
1-10
Ceiling Cassette 1-way
9. Sound Levels Overall Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1.5m
Cassette 1-way
Microphone
Sound Levels dB(A) H M L
Model ARNU07GTJ*2 ARNU09GTJ*2 ARNU12GTJ*2
40 40 41
38 38 39
37 37 37
Sound Pressure Level ARNU07GTJ*2
ARNU09GTJ*2 80
NC-65 60 NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold 63
70
NC-65 60 NC-60
NC-50
250
500
1000 2000 4000 8000
Octave Band Center Frequency (Hz)
Ceiling Cassette 1-way
NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-15 125
NC-55
50
NC-20
10
80
70
NC-65 60 NC-60
NC-50
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-15 125
NC-55
50
NC-20
10 63
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
80
ARNU12GTJ*2
NC-20 NC-15
10 63
125
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
1-11
• Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Anti-bacteria filter
Air Outlet
Required Parts • Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose
TEMP
Remote Controller
Air Intake
Required Tools • Level • Screw driver • Electric drill • Hole core drill • Flaring Tool set • Torque Wrenches • Hexagonal Wrench • Gas-leak detector • Thermometer
10.1 Selection of the best location
1-12
Ceiling board
50 or more
Ceiling board
50 or more
30 or less
20 or more
Ceiling
Above 250 330 or less
• There should not be any heat source or steam near the unit. • There should not be any obstacles to the air circulation. • A place where air circulation in the room will be good. • A place where drainage can be easily obtained. • A place where noise prevention is taken into consideration. • Do not install the unit near the door way. • Ensure the spaces indicated by arrows from the wall, ceiling, or other obstacles. • The indoor unit must have sufficient maintenance space.
100 or more
Cassette 1-way
10. Installation
Unit:cm Floor
Ceiling Cassette 1-way
10.2 Ceiling opening dimensions and hanging bolt location • The dimensions of the paper pattern for installation are the same as those of the ceiling opening dimensions.
1,030 (Ceiling opening)
53
50
344(Hanging bolt) 53
Level gauge
923 (Hanging bolt) 860
Cassette 1-way
Ceiling
450 (Ceiling opening) 410
57
CAUTION (unit: mm)
• This air-conditioner uses a drain pump. • Install the unit horizontally using a level gauge. • During the installation, care should be taken not to damage electric wires. • Select and mark the position for fixing bolts and piping hole. • Decide the position for fixing bolts slightly tilted to the drain direction after considering the direction of drain hose. • Drill the hole for anchor bolt on the wall.
Ceiling board
NOTE: • Avoid the following installation location. 1. Such places as restaurants and kitchen where considerable amount of oil steam and flour is generated. These may cause heat exchange efficiency reduction, or water drops, drain pump mal-function. In these cases, take the following actions; • Make sure that ventilation fan is enough to cover all noxious gases from this place. • Ensure enough distance from the cooking room to install the air conditioner in such a place where it may not suck oily steam.
Air conditioner
Take enough distance Use the ventilation fan for smoke-collecting hood with sufficient capacity. Cooking table
2. Avoid installing air conditioner in such places where cooking oil or iron powder is generated. 3. Avoid places where inflammable gas is generated. 4. Avoid place where noxious gas is generated. 5. Avoid places near high frequency generators.
Ceiling Cassette 1-way
1-13
Nut (W3/8 or M10)
55mm
Cassette 1-way
Ceiling Keep the length of the bolt from the bracket to 40mm
Hanging bolt (W3/8 or M10)
Flat washer for M10 (accessory) Ceiling board
Spring washer (M10)
Flat washer for M10 (accessory) Nut (W3/8 or M10)
Air Conditioner body
Set screw of paper pattern (4 pieces)
Paper pattern for installation
Open the ceiling board along the outer edge of the paper pattern
Adjust the same height
• The following parts are locally purchased. Hanging Bolt - W 3/8 or M10 Nut - W 3/8 or M10 Spring Washer - M10 Plate Washer - M10
Ceiling board
CAUTION • Tighten the nut and bolt to prevent the unit from falling.
10.3 Wiring Connection Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING Make sure that the screws of the terminal are not loose.
1-14
Ceiling Cassette 1-way
10.4 Installation of Decoration Panel Before installing the decoration panel, always remove the paper template.
The decoration panel has its installation direction.
Air conditioner unit
Decorative panel fixing screws (hexagon M6 screws) Temporarily fitting at 2 poles (Tightening about 10mm)
Piping side
Control box cover Cover
Plasma filter
Key holes
Louver motor
Decorative panel fixing screws (Hexagon M6 screw)
Decorative panel
Push
Ratch pull
Inlet Grille
CAUTION Install the decoration panel otherwise cool air leakage causes condensation. Water drops fall.
Correct method
Wrong method Air conditioner unit Cool air leakage (no good) Ceiling board Decoration panel
Air conditioner unit Ceiling board Decoration panel
Fit the insulator (this part) and be careful for cool air leakage
Ceiling Cassette 1-way
1-15
Cassette 1-way
1. Temporarily fix two decoration panel fixing screws (hexagon M6 screw) on the unit body. (Tighten by amount 10mm in length.) The fixing screws (hexagon M6 screw) are included in the Indoor unit box. 2. Remove the air inlet grille from the decoration panel. (Remove the hook for the air inlet grille cord.) 3. Hook the decoration panel key hole ( ) on the screws fixed in step above, and slide the panel so that the screws reach the key hole edge. 4. Retighten completely two temporarily fixed screws and other two screws. (Total 4 screws) 5. Connect the louver motor connector and display connector and room temp. thermistor connector. 6. After tightening these screws, install the air inlet grille (including the air filter) and push middle point of inlet grille. 7. Assemble the cover display and the cover.
• Drain piping must have down-slope (1/50 to 1/100): be sure not to provide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm. Piping material: Polyvinyl chloride pipe 25mm and pipe fittings
Upward routing not allowed
Pipe clamp Indoor unit
Maintenance drain port
• Be sure to install heat insulation on the drain piping. 1/50~1/100
Heat insulation material: Polyethylene foam with thickness more than 8 mm.
MAX 700mm
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation:
Feed water
Flexible drain hose (accessory) Main drain pipe
Drain Pump
Drain port
Glue the joint
Drain hose connection Use the clip (accessory)
Drain pan
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. • Feed water to the flexible drain hose and check the piping for leakage. • Be sure to check the drain pump for normal operating and noise when electrical wiring is complete. • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
CAUTION The supplied flexible drain hose should not be strained. A strained hose may cause leakage of water.
Max 300mm
Hanger distance 1~15m
Hanger Bracket 1/50~1/100 slope
Metal clamp Flexible drain hose
Max 700mm
Cassette 1-way
10.5 Indoor Unit Drain Piping
Insulation
HAND OVER Teach the customer the operation and maintenance procedures, using the operation manual. (air filter cleaning, temperature control, etc.)
1-16
Ceiling Cassette 1-way
CAUTION
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Remote Controller
5feet (1.5meters)
TEMP
Controller Remote
no
no
Fig.1 Typical locations for remote controller
Ceiling Cassette 1-way
1-17
Cassette 1-way
After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have separate power specially for the air conditioner. As for the method of wiring, follow the circuit diagram pasted on the inside of control box cover. 2) Provide a circuit breaker switch between power source and the unit. 3) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could give rise to burn-out of the wires.) 4) Confirm the Specification of power source 5) Confirm that electrical capacity is sufficient. 6) Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 7) Confirm that the cable thickness is as specified in the power sources specification. (Particularly note the relation between cable length and thickness.) 8) Do not install the leakage breaker in a place which is wet or moist. Water or moist may cause short circuit. 9) The following troubles would be caused by voltage drop-down. • Vibration of a magnetic switch, damage on the contact point there of, fuse breaking, disturbance to the normal function of a overload protection device. • Proper starting power is not given to the compressor.
11. Accessories
Cassette 1-way
Standard Accessories Name
Clamp metal
Drain hose
Insulation for fitting
Quantity
2 EA
1 EA
1 set
Washer for hanging bracket 8 EA
Clamp (Tie Wrap)
Bolt
4 EA
4 EA
Screw
(Other)
3 EA • Paper pattern for installation • Owner's manual • Installation manual
Shape
for gas pipe
for liquid pipe • Screws for fixing panels are attached to decoration panel.
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
1-18
Ceiling Cassette 1-way
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Cassette 2-way
Cassette 2-way
Ceiling Cassette 2-Way
1. List of Functions
Cassette 2-way
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU18GTL*2, ARNU24GTL*2 2 Auto O 4/5/4 X O O O X Option O O O X O O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory X Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
2-1
Ceiling Cassette 2-way
2. Specifications * Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity Casing Body Dimensions (WxDxH) Front Panel Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Panel Color Panel Name(Acc'y)
Ø, V, Hz
2Way Ceiling Cassette ARNU18GTL*2 5.6 4,800 19,100 6.3 5,400 21,500 Galvanized Steel Plate 830x550x225 32.6x21.6x8.9 1,050x640x28.5 41.3x25.2x1.1 2x11x20 0.13 Cross Flow Fan 20x2 0.18x2 13/12/10 459/424/353 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø6.35(1/4) Ø12.7(1/2) 25.0 22(48.5) 40/35/30 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Morning fog PT-HL*
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are Net Capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Ceiling Cassette 2-way
Cassette 2-way
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
2-2
Cassette 2-way
* Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Body Dimensions (WxDxH) Front Panel Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Panel Color Panel Name(Acc'y)
Ø, V, Hz
2Way Ceiling Cassette ARNU24GTL*2 7.1 6,100 24,200 8.0 6,900 27,300 Galvanized Steel Plate 830x550x225 32.6x21.6x8.9 1,050x640x28.5 41.3x25.2x1.1 2x11x20 0.13 Cross Flow Fan 20x2 0.18x2 17/15/13 601/530/459 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø9.52(3/8) Ø15.88(5/8) 25.0 22(48.5) 42/37/32 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Morning fog PT-HL*
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are Net Capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
2-3
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Cassette 2-way
3
4
1050
889.2
830
2
1
B
28.5
225 126.5
A
TL
A B 47.9
Air suction grill Air discharge grill
3 4
Unit size(24k):ø15.88
Unit size(18k):ø12.7
Unit size(24k):ø9.52
Unit size(18k):ø6.35
Descripition
(unit : mm)
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: TL
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Gas pipe connection
Liquid pipe connection
Name
2
1
Number
ARNU18GTL*2 ARNU24GTL*2
Cassette 2-way
Ceiling Cassette 2-way 275 69.5
Ceiling Cassette 2-way
3. Dimensions
2-4
640
550
Cassette 2-way
4. Piping Diagrams
Heat Exchanger
EEV
Filter
:Cooling :Heating
Th2
Th3 C.F.F.
Filter Th1
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
2-5
Model
Gas
Liquid
ARNU18GTL*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GTL*2
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Cassette 2-way
5. Wiring Diagrams TL Chassis
Cassette 2-way
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-MOTOR2 CN-D/PUMP CN-485 CN-DISP CN-EEV CN-VANE2 CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO
SPEC AC Power supply Fan motor output Fan motor output Drain pump output Communication Display EEV Output Step motor Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
DESCRIPTION AC Power line input for indoor controller Motor output of BLDC Motor output of BLDC AC output for drain pump Connection between indoor and outdoor Display of indoor status EEV Control output Step motor output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Cassette 2-way
2-6
6. Capacity Tables
Cassette 2-way
6.1 Cooling Capacity
Capacity Index
5.6
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
32 24 TC SHC kW kW
10
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.7
3.8
7.2
4.1
12
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.7
3.8
7.1
4.0
14
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.7
3.8
7.1
4.0
16
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.7
3.8
7.0
4.0
18
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.6
3.8
6.9
3.9
20
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.5
3.7
6.8
3.9
21
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.5
3.7
6.8
3.9
23
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.5
3.7
6.7
3.8
25
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.4
3.6
6.6
3.7
27
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.3
3.6
6.5
3.7
29
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
6.0
4.0
6.3
3.5
6.4
3.6
31
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
5.9
4.0
6.2
3.5
6.3
3.6
33
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
5.8
3.9
6.1
3.5
6.2
3.5
35
3.8
3.2
4.5
3.6
5.2
3.9
5.6
3.9
5.8
3.9
6.0
3.4
6.1
3.5
37
3.8
3.2
4.5
3.6
5.2
3.9
5.5
3.9
5.7
3.8
5.9
3.3
6.0
3.4
39
3.8
3.2
4.5
3.6
5.2
3.9
5.5
3.8
5.6
3.8
5.8
3.3
5.9
3.4
42
3.8
3.2
4.5
3.6
5.2
3.9
5.4
3.8
5.5
3.7
5.7
3.2
5.8
3.3
44
3.8
3.2
4.5
3.6
5.2
3.8
5.3
3.7
5.4
3.7
5.6
3.2
5.7
3.2
46
3.8
3.2
4.5
3.6
4.9
3.6
5.0
3.5
5.1
3.4
5.1
2.9
5.2
2.9
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
2-7
Cooling capacity
SHC: Sensible Heat Capacity(kW)
Ceiling Cassette 2-way
Cooling capacity
Capacity Index
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
32 24 TC SHC kW kW
10
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.5
4.8
9.1
5.2
12
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.5
4.8
9.0
5.1
14
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.5
4.8
8.9
5.1
16
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.5
4.8
8.8
5.0
18
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.4
4.8
8.8
5.0
20
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.3
4.7
8.7
4.9
21
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.3
4.7
8.6
4.9
23
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.2
4.6
8.5
4.8
25
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.1
4.6
8.4
4.8
27
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.6
5.1
8.0
4.6
8.3
4.7
29
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.5
5.1
7.9
4.5
8.1
4.6
31
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.5
5.1
7.8
4.4
8.0
4.5
33
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.4
5.0
7.7
4.4
7.9
4.5
35
4.8
4.1
5.7
4.5
6.6
4.9
7.1
5.0
7.3
4.9
7.6
4.3
7.8
4.4
37
4.8
4.1
5.7
4.5
6.6
4.9
7.0
4.9
7.2
4.9
7.5
4.2
7.6
4.3
39
4.8
4.1
5.7
4.5
6.6
4.9
6.9
4.9
7.1
4.8
7.4
4.2
7.5
4.3
42
4.8
4.1
5.7
4.5
6.6
4.9
6.8
4.8
7.0
4.7
7.2
4.1
7.3
4.2
44
4.8
4.1
5.7
4.5
6.5
4.8
6.7
4.7
6.9
4.7
7.1
4.0
7.2
4.1
46
4.8
4.1
5.7
4.5
6.3
4.6
6.3
4.4
6.5
4.4
6.5
3.7
6.6
3.7
Notes: TC: Total Capacity(kW)
Ceiling Cassette 2-way
SHC: Sensible Heat Capacity(kW)
2-8
Cassette 2-way
7.1
20 14 TC SHC kW kW
Outdoor air temp. (DB, 째C)
Cassette 2-way
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
5.6
Heating capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
-19.8 -20.0
kW 4.2
kW 4.2
kW 4.2
kW 4.2
kW 4.2
kW 4.2
-18.8 -19.0
4.3
4.3
4.3
4.3
4.3
4.3
-16.7 -17.0
4.6
4.6
4.6
4.6
4.6
4.5
-14.7 -15.0
4.9
4.8
4.3
4.8
4.8
4.8
-12.6 -13.0
5.1
5.1
4.5
5.0
5.0
5.0
-10.5 -11.0
5.4
5.4
4.8
5.4
5.3
5.3
-9.5 -10.0
5.4
5.4
4.9
5.4
5.4
5.4
-8.5
-9.1
5.5
5.5
5.0
5.5
5.5
5.4
-7.0
-7.6
5.7
5.7
5.1
5.6
5.6
5.5
-5.0
-5.6
6.0
6.0
5.4
5.8
5.8
5.5
-3.0
-3.7
6.2
6.2
5.5
6.1
5.9
5.5
0.0
-0.7
6.6
6.6
5.8
6.1
5.9
5.5
3.0
2.2
7.0
6.7
6.2
6.1
5.9
5.5
5.0
4.1
7.1
6.7
6.3
6.1
5.9
5.5
7.0
6.0
7.2
6.7
6.3
6.1
5.9
5.5
9.0
7.9
7.2
6.7
6.3
6.1
5.9
5.5
11.0
9.8
7.2
6.7
6.3
6.1
5.9
5.5
13.0 11.8
7.2
6.7
6.3
6.1
5.9
5.5
15.0 13.7
7.2
6.7
6.3
6.1
5.9
5.5
Notes: TC: Total Capacity(kW)
2-9
Ceiling Cassette 2-way
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
-19.8 -20.0
kW 5.4
kW 5.4
kW 5.4
kW 5.3
kW 5.3
kW 5.3
-18.8 -19.0
5.5
5.5
5.5
5.5
5.4
5.4
-16.7 -17.0
5.8
5.8
5.8
5.8
5.8
5.8
-14.7 -15.0
6.2
6.1
5.5
6.1
6.1
6.1
-12.6 -13.0
6.5
6.5
5.8
6.4
6.4
6.4
-10.5 -11.0
6.8
6.8
6.0
6.8
6.7
6.7
-9.5 -10.0
6.9
6.9
6.2
6.9
6.9
6.8
-8.5
-9.1
7.0
7.0
6.3
7.0
7.0
6.8
-7.0
-7.6
7.3
7.3
6.5
7.1
7.1
7.0
-5.0
-5.6
7.6
7.6
6.8
7.4
7.4
7.0
-3.0
-3.7
7.9
7.9
7.0
7.7
7.5
7.0
0.0
-0.7
8.4
8.4
7.4
7.8
7.5
7.0
3.0
2.2
8.9
8.6
7.8
7.8
7.5
7.0
5.0
4.1
9.0
8.6
8.0
7.8
7.5
7.0
7.0
6.0
9.2
8.6
8.0
7.8
7.5
7.0
9.0
7.9
9.2
8.6
8.0
7.8
7.5
7.0
11.0
9.8
9.2
8.6
8.0
7.8
7.5
7.0
13.0 11.8
9.2
8.6
8.0
7.8
7.5
7.0
15.0 13.7
9.2
8.6
8.0
7.8
7.5
7.0
Notes: TC: Total Capacity(kW)
Ceiling Cassette 2-way
2-10
Cassette 2-way
7.1
Indoor air temp. (DB, 째C)
7. Air Velocity and Temperature Distribution(Reference Data)
Cassette 2-way
ARNU24GTL*2 Cooling
Heating
Discharge angle: 40째
Discharge angle: 60째
Air velocity [m/s]
Air velocity [m/s]
22
21
20
20
2.7m 21
22
23
32 31
2m
23
30
24
24
1m
28 26
4m
3m
2m
1m
0m
1m
2m
0m 4m
3m
Temperature [째C]
4m
29
27
3m
2m
2m
30 27
28
1m
2.7m
32 31
29 28
0m
1m
28 27
1m
26
2m
3m
Temperature [째C]
2.7m 2.0
2.5
3.0
3.0
2.5
1.5
1.5
1.0
2-11
2.7m 2.5 2.0
2m
2.0 1.0
0.5
4m
2m
1m
0m
1m
2m
3m
0m 4m
2.5 2.0
1.5
1m
3m
2m
1m
1.0
0.5
4m
2m
1.5
1.0
0.5
3m
0m 4m
0.5
1m
0m
1m
2m
3m
0m 4m
Ceiling Cassette 2-way
8. Electric Characteristics Units Model
Type
ARNU18GTL*2
TL
ARNU24GTL*2
TL
ARNU18GTL*2
TL
ARNU24GTL*2
TL
Power Supply Hz
Volts
50
220~240
60
220
Voltage Range MCA
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
Max:264
1.52
15
0.04
0.41
70
70
Min:198
1.52
15
0.04
0.41
70
70
Max:242
1.52
15
0.04
0.41
70
70
Min:198
1.52
15
0.04
0.41
70
70 Cassette 2-way
Symbols: MCA : Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA ≤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the larger value on the MCA. 5. Instead of fuse, use Circuit Breaker.
Ceiling Cassette 2-way
2-12
9. Sound Levels
Cassette 2-way
Overall Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1.5m Microphone
Sound Levels dB(A)
Model
H
M
L
ARNU18GTL*2
40
35
30
ARNU24GTL*2
42
37
32
Sound Pressure Level ARNU18GTL*2
ARNU24GTL*2 80
70
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
10
Approximate Hearing Threshold 63
NC-65 60 NC-60
125
250
500
NC-15 1000 2000 4000 8000
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-20
Octave Band Center Frequency (Hz)
2-13
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
80
NC-20 NC-15
10 63
125
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
Ceiling Cassette 2-way
10. Installation • Please read the instruction sheets completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Cassette 2-way
Anti-bacteria filter TEMP
Remote Controller
Air Intake Air Outlet
Required Parts • Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose
Required Tools • Level • Screw driver • Electric drill • Hole core drill • Flaring Tool set • Torque Wrenches • Hexagonal Wrench • Gas-leak detector • Thermometer
Ceiling Cassette 2-way
Ceiling Board
50 or more
30 or less
50 or more
Above 250 330 or less
Ceiling Ceiling Board
100 or more
• There should not be any heat source or steam near the unit. • There should not be any obstacles to the air circulation. • A place where air circulation in the room will be good. • A place where drainage can be easily obtained. • A place where noise prevention is taken into consideration. • Do not install the unit near the door way. • Ensure the spaces indicated by arrows from the wall, ceiling, or other obstacles. • The indoor unit must have sufficient maintenance space.
20 or more
10.1 Selection of the best location
Unit:cm Floor
2-14
Cassette 2-way
10.2 Ceiling opening dimensions and hanging bolt location • The dimensions of the paper pattern for installation are the same as those of the ceiling opening dimensions. Ceiling board
Ceiling Level gauge
CAUTION • This air-conditioner uses a drain pump. • Install the unit horizontally using a level gauge. • During the installation, care should be taken not to damage electric wires.
• Select and mark the position for fixing bolts and piping hole. • Decide the position for fixing bolts slightly tilted to the drain direction after considering the direction of drain hose. • Drill the hole for anchor bolt on the wall.
NOTE: • Avoid the following installation location. 1. Such places as restaurants and kitchen where considerable amount of oil steam and flour is generated. These may cause heat exchange efficiency reduction, or water drops, drain pump mal-function. In these cases, take the following actions; • Make sure that ventilation fan is enough to cover all noxious gases from this place. • Ensure enough distance from the cooking room to install the air conditioner in such a place where it may not suck oily steam.
Air conditioner
Take enough distance Use the ventilation fan for smoke-collecting hood with sufficient capacity. Cooking table
2. Avoid installng air conditioner in such places where cooking oil or iron powder is generated. 3. Avoid places where inflammable gas is generated. 4. Avoid place where noxious gas is generated. 5. Avoid places near high frequency generators.
2-15
Ceiling Cassette 2-way
Ceiling
Nut (W3/8 or M10)
90mm
Keep the length of the bolt from the bracket to 40mm
Hanging bolt (W3/8 or M10)
Flat washer for M10 False (accessory) ceiling board
Spring washer (M10)
Air Conditioner body
Set screw of paper pattern (4 pieces)
Paper pattern for installation
Open the ceiling board along the outer edge of the paper pattern
Adjust the same height
• The following parts are locally purchased. Hanging Bolt - W 3/8 or M10 Nut - W 3/8 or M10 Spring Washer - M10 Plate Washer - M10
Cassette 2-way
Flat washer for M10 (accessory) Nut (W3/8 or M10)
False ceiling board
CAUTION • Tighten the nut and bolt to prevent the unit from falling.
10.3 Wiring Connection Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING Make sure that the screws of the terminal are not loose.
Ceiling Cassette 2-way
2-16
Cassette 2-way
10.4 Installation of Decoration Panel Before installing the decoration panel, always remove the paper template.
The decoration panel has its installation direction.
1. Temporarily fix two decoration panel fixing screws (hexagon M5 screw) on the unit body. (Tighten by amount 10mm in length.) The fixing screws (hexagon M5 screw) are included in the indoor unit box. 2. Remove the air inlet grille from the decoration panel. (Remove the hook for the air inlet grille cord.) 3. Hook the decoration panel key hole ( ) on the screws fixed in step above, and slide the panel so that the screws reach the key hole edge. 4. Retighten completely two temporarily fixed screws and other two screws. (Total 4 screws) 5. Connect the louver motor connector and display connector. 6. After tightening these screws, install the air inlet grille (including the air filter). Air conditioner unit Decorative panel fixing screws (hexagon M6 screws) Temporary fitting at 2 poles (Tightening about 10mm)
Piping side
Control box cover Cover
Plasma filter
Louver motor
Key holes
Decorative panel fixing screws (Hexagon M6 screw)
Decorative panel Push
Ratch pull
Inlet Grille
CAUTION Install the decoration panel otherwise cool air leakage causes condensation. Water drops fall.
Correct method
Wrong method Air conditioner unit Cool air leakage (no good) Ceiling board Decoration panel
Air conditioner unit Ceiling board Decoration panel
Fit the insulator (this part) and be careful for cool air leakage
2-17
Ceiling Cassette 2-way
10.5 Indoor Unit Drain Piping
Upward routing not allowed
Pipe clamp
• Drain piping must have down-slope (1/50 to 1/100): Make sure not to provide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm.
Indoor unit
Maintenance drain port
1/50~1/100
• Make sure to install heat insulation on the drain piping.
MAX 700mm
Heat insulation material: Polyethylene foam with thickness more than 8 mm.
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation: Feed water
Flexible drain hose (accessory) Main drain pipe
Drain Pump
Drain port
Glue the joint
Drain hose connection Use the clip (accessory)
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. • Feed water to the flexible drain hose and check the piping for leakage. • Make sure to check the drain pump for normal operating and noise when electrical wiring is complete. • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
Drain pan
Max 300mm
The supplied flexible drain hose should not be strained. A strained hose may cause leakage of water.
Hanger distance 1~15m
Metal clamp Flexible drain hose
Hanger Bracket 1/50~1/100 slope Max 700mm
CAUTION
Insulation
Ceiling Cassette 2-way
2-18
Cassette 2-way
Piping material: Polyvinyl chloride pipe inner diometes Ø 25mm and pipe fittings
Cassette 2-way
CAUTION After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have separate power specially for the air conditioner. As for the method of wiring, follow the circuit diagram pasted on the inside of control box cover. 2) Provide a circuit breaker switch between power source and the unit. 3) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could give rise to burn-out of the wires.) 4) Confirm the specification of power source 5) Confirm that electrical capacity is sufficient. 6) Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 7) Confirm that the cable thickness is as specified in the power sources specification. (Particularly note the relation between cable length and thickness.) 8) Do not install the leakage breaker in a place which is wet or moist. Water or moist may cause short circuit. 9) The following troubles would be caused by voltage drop-down. • Vibration of a magnetic switch, damage on the contact point there of, fuse breaking, disturbance to the normal function of a overload protection device. • Proper starting power is not given to the compressor.
HAND OVER Teach the customer the operation and maintenance procedures, using the operation manual. (air filter cleaning, temperature control, etc.)
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
2-19
Ceiling Cassette 2-way
11. Accessories Standard Accessories Name
Clamp metal
Drain hose
Insulation for fitting
Quantity
2 EA
1 EA
1 set
Washer for hanging bracket 8 EA
Clamp (Tie Wrap) 4 EA
Bolt
(Other)
4 EA
Shape
for gas pipe
for liquid pipe • Screws for fixing panels are attached to decoration panel.
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
Ceiling Cassette 2-way
2-20
Cassette 2-way
• Paper pattern for installation • Owner's manual • Installation manual
Cassette 4-way
Ceiling Cassette 4-way
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Cassette 4-way
1. List of Functions Category
Air flow
Installation
Reliability
Convenience
Individual control
Special function kit
Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Elevation Grill Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU05GTR*2, ARNU07GTR*2, ARNU09GTR*2, ARNU12GTR*2 ARNU15GTQ*2, ARNU18GTQ*2, ARNU24GTP*2, ARNU28GTP*2 ARNU36GTN*2, ARNU42GTM*2, ARNU48GTM*2 4 Auto O 4/5/4 X O O O X Option O O X X O O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O O O O O O Accessory (TM,TN,TP only) Accessory Accessory Accessory Accessory X Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
Ceiling Cassette 4-way
3-1
Cassette 4-way
Air purifying
Function
2. Specifications
Cassette 4-way
* Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Body Dimensions(WxDxH) Front Panel Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control
Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Packaged kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Panel Color Panel Name(Accessory)
Ø, V, Hz mm2 mm2
ARNU05GTR*2 1.6 1,400 5,500 1.8 1,500 6,100 Galvanized Steel Plate 570x570x214 22.4x22.4x8.4 700x700x30 27.5x27.5x1.2 1x8x18 0.21 Turbo Fan 43x1 0.2 7.5/7.0/6.6 265/247/212 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø6.35(1/4) Ø12.7(1/2) 25 13.1(28.9) 15.4(33.9) 36/35/33 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Morning fog
4 Way Ceiling Cassette ARNU07GTR*2 ARNU09GTR*2 2.2 2.8 1,900 2,400 7,500 9,600 2.5 3.2 2,200 2,800 8,500 10,900 Galvanized Steel Plate Galvanized Steel Plate 570x570x214 570x570x214 22.4x22.4x8.4 22.4x22.4x8.4 700x700x30 700x700x30 27.5x27.5x1.2 27.5x27.5x1.2 1x8x18 2x8x18 0.21 0.21 Turbo Fan Turbo Fan 43x1 43x1 0.2 0.2 7.5/7.0/6.6 8.0/7.5/7.1 265/247/212 283/265/251 Direct Direct BLDC BLDC Microprocessor, Microprocessor, Thermostat for cooling Thermostat for cooling and heating and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) 25 25 13.1(28.9) 14.2(31.3) 15.4(33.9) 16.5(36.3) 36/35/33 36/35/34 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog PT-UQC
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
3-2
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Cassette 4-way
* Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity Casing Body Dimensions(WxDxH) Front Panel Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control
Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Packaged kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Panel Color Panel Name(Accessory)
Ø, V, Hz mm2 mm2
ARNU12GTR*2 3.6 3,100 12,300 4.0 3,400 13,600 Galvanized Steel Plate 570x570x214 22.4x22.4x8.4 700x700x30 27.5x27.5x1.2 2x8x18 0.21 Turbo Fan 43x1 0.2 8.7/8.0/7.0 307/283/247 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø6.35(1/4) Ø12.7(1/2) 25 14.2(31.3) 16.5(36.3) 36/35/34 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Morning fog
4 Way Ceiling Cassette ARNU15GTQ*2 ARNU18GTQ*2 4.5 5.6 3,900 4,800 15,400 19,100 5.0 6.3 4,300 5,400 17,100 21,500 Galvanized Steel Plate Galvanized Steel Plate 570x570x256 570x570x256 22.4x22.4x10.1 22.4x22.4x10.1 700x700x30 700x700x30 27.5x27.5x1.2 27.5x27.5x1.2 2x10x18 2x10x18 0.27 0.27 Turbo Fan Turbo Fan 43x1 43x1 0.2 0.2 11.0/10.0/9.3 11.2/11.0/10.0 388/353/328 396/388/353 Direct Direct BLDC BLDC Microprocessor, Microprocessor, Thermostat for cooling Thermostat for cooling and heating and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) 25 25 15.5(34.2) 15.5(34.2) 18.0(39.7) 18.0(39.7) 37/36/35 38/37/36 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog PT-UQC
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Ceiling Cassette 4-way
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
3-3
Cassette 4-way
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Cassette 4-way
* Model Name A:Basic, C:Plasma 4 Way Ceiling Cassette ARNU24GTP*2 ARNU28GTP*2 ARNU36GTN*2 7.1 8.2 10.6 Cooling Capacity 6,100 7,100 9,100 24,200 28,000 36,200 8.0 9.2 11.9 Heating Capacity 6,900 8,000 10,200 27,300 31,500 40,600 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate Casing 840 x 840 x 204 840 x 840 x 204 840 x 840 x 246 Dimensions Body mm 33.0x33.0x8.0 33.0x33.0x8.0 33.0x33.0x9.7 (WxDxH) inch 950 x 950 x 25 950 x 950 x 25 950 x 950 x 25 Front Panel mm 37.4 x 37.4 x 1 37.4 x 37.4 x 1 37.4 x 37.4 x 1 inch 2 x 8 x 19 2 x 8 x 19 2x10x19 Coil Rows x Columns x FPI 0.40 0.40 0.57 Face Area m2 Turbo Fan Turbo Fan Turbo Fan Fan Type 30 30 135 Motor Outputx Number W 0.15 0.15 0.56 Running Current A 17/15/13 19/16/14 25/21/19 Air Flow Rate(H/M/L) CMM 600/529/459 671/565/494 883/742/671 cfm Direct Direct Direct Drive BLDC BLDC BLDC Motor type Microprocessor, Thermostat for cooling and heating Temperature Control Foamed polystrene Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Fuse Fuse Fuse Safety Device Ø9.52(3/8) Ø9.52(3/8) Ø9.52(3/8) Pipe Liquid Side mm(inch) Ø15.88(5/8) Ø15.88(5/8) Ø15.88(5/8) Connections Gas Side mm(inch) 25.0 25.0 25.0 Drain Pipe(Internal Dia.) mm 20.8(45.8) 20.8(45.8) 23.5(51.8) Net Weight Body kg(lbs) 36/34/31 39/35/33 43/40/37 Noise Level (Sound Press, 1.5m, H/M/L) dB(A) 1, 220~240, 50 1, 220~240, 50 1, 220~240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV Refrigerant Control CV2.0 X 3C CV2.0 X 3C CV2.0 X 3C Power cord CVV-SB 1.25 X 2C CVV-SB 1.25 X 2C CVV-SB 1.25 X 2C Transmission cable Morning fog Morning fog Morning fog Panel Color PT-UMC Panel Name(Accessory) PTEGM0 Elevation Grill(Accessory) Type Model
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
3-4
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Cassette 4-way
* Model Name A:Basic, C:Plasma Type Model Cooling Capacity
Heating Capacity
Body Front Panel
Coil Fan
Rows x Columns x FPI Face Area Type Motor Outputx Number Running Current Air Flow Rate(H/M/L)
mm inch mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Pipe Liquid Side mm(inch) Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight Body kg(lbs) Noise Level (Sound Press, 1.5m, H/M/L) dB(A) Power Supply Ø, V, Hz Refrigerant Control Power cord Transmission cable Panel Color Panel Name(Accessory) Elevation Grill(Accessory)
4 Way Ceiling Cassette ARNU42GTM*2 ARNU48GTM*2 12.3 14.1 10,600 12,100 42,000 48,100 13.8 15.9 11,000 13,200 43,800 51,200 Galvanized Steel Plate Galvanized Steel Plate 840x840x288 840x840x288 33.0x33.0x11.3 33.0x33.0x11.3 950 x 950 x 25 950 x 950 x 25 37.4 x 37.4 x 1 37.4 x 37.4 x 1 2 x 12 x 19 2 x 12 x 19 0.57 0.57 Turbo Fan Turbo Fan 135 135 0.56 0.56 30/27/24 31/29/27 1,059/954/848 1,059/1,024/954 Direct Direct BLDC BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø9.52(3/8) Ø9.52(3/8) Ø15.88(5/8) Ø15.88(5/8) 25.0 25.0 25.6(56.4) 25.6(56.4) 44/41/38 46/43/41 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV2.0 X 3C CV2.0 X 3C CVV-SB 1.25 X 2C CVV-SB 1.25 X 2C Morning fog Morning fog PT-UMC PTEGM0
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Ceiling Cassette 4-way
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
3-5
Cassette 4-way
Casing Dimensions (WxDxH)
Unit kW kcal/h Btu/h kW kcal/h Btu/h
6
5
55
380(Air outlet hole) 473 700
172
4-R 2
0 378.6 380(Air outlet hole) 700 22.5
378.6 4
523 59.5 84.5 30 19 142.5
2 1
3
79 53 48
128 570
165
461 570
517
5
(unit : mm)
Unit size(5k, 7k, 9k, 12k):ø12.7
Unit size(5k, 7k, 9k, 12k):ø6.35
Descripition
CHASSIS CODE: TR
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Air suction grill
6
4
Air discharge grill
Power supply connection
3 5
Gas pipe connection Drain pipe connection
2
Liquid pipe connection
Name
1
Number
ARNU05GTR*2 ARNU07GTR*2 ARNU09GTR*2 ARNU12GTR*2
Ceiling Cassette 4-way
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
Branch Duct Connection
63
69
517 214
3-6 34.5
R3
570
Cassette 4-way
3. Dimensions
Ceiling Cassette 4-way
6
5
55
380(Air outlet hole) 473 700
4
30 19 142.5
2 1
3
570
165
461 570
517
5
174
R3
570
Air discharge grill Air suction grill
5 6
Unit size(15k, 18k):Ă˜12.7
Unit size(15k, 18k):Ă˜6.35
Descripition
(unit : mm)
CHASSIS CODE: TQ
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Drain pipe connection Power supply connection
4
Gas pipe connection
3
Liquid pipe connection
1
Name
ARNU15GTQ*2 ARNU18GTQ*2
2
Number
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
Branch Duct Connection
63
68
76 94
0 4-R 2 378.6 380(Air outlet hole) 700 22.5
378.6
523 59.5 125 95.5
172
79 48
517 256
Ceiling Cassette 4-way
Cassette 4-way
Ceiling Cassette 4-way
3-7
54
500(Air outlet hole) 734 950
4-
5
R2
0
6
500(Air outlet hole) 618 950
25
292
671
2
108 60
1
204 154
65 40
618
79 41.5
350
840
165
840
787
787
804
53.5
4
62
3
R35
Gas pipe connection Drain pipe connection Power supply connection Air discharge grill Air suction grill
3 4 5 6
Unit size(24k, 28k):ø15.88
Unit size(24k, 28k):ø9.52
Descripition
(unit : mm)
CHASSIS CODE: TP
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Liquid pipe connection
2
Name
ARNU24GTP*2 ARNU28GTP*2
1
Number
Cassette 4-way
Ceiling Cassette 4-way
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
Branch Duct Connection
80
A
204
3-8 684 840
A direction View
60 82 99
126
Ceiling Cassette 4-way
3-9
5
6
246 195
2 110
1
60 840
165
840
40
350
80
103 141
246
3
4
62
Power supply connection Air discharge grill Air suction grill
4 5 6
(unit : mm)
Unit size(36k):ø15.88
Unit size(36k):ø9.52
Descripition
CHASSIS CODE: TN
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Gas pipe connection Drain pipe connection
2 3
Liquid pipe connection
Name
1
Number
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
Branch Duct Connection
53.5
A
ARNU36GTN*2
Ceiling Cassette 4-way
Cassette 4-way
Ceiling Cassette 4-way 107
126
78
A direction View
100 52
R35
25
5
6
2
1 165
840
350
53.5
3-10 100 84
3
4
A direction View 126
288
237
25
Power supply connection Air discharge grill Air suction grill
3 4 5 6
(unit : mm)
Unit size(42k, 48k):ø15.88
Unit size(42k, 48k):ø9.52
Descripition
CHASSIS CODE: TM
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Gas pipe connection Drain pipe connection
2
Liquid pipe connection
Name
ARNU42GTM*2 ARNU48GTM*2
1
Number
Cassette 4-way
Ceiling Cassette 4-way
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
Branch Duct Connection
A
109
R35
Ceiling Cassette 4-way
4. Piping Diagrams
Heat Exchanger
:Cooling :Heating
EEV Filter
Th3
Th2 Turbo Fan
Th1
Cassette 4-way
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Model
Gas
Liquid
ARNU05GTR*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU07GTR*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GTR*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GTR*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GTQ*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GTQ*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GTP*2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU28GTP*2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU36GTN*2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU42GTM*2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU48GTM*2
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Cassette 4-way
3-11
5. Wiring Diagrams
Cassette 4-way
TR/TQ Chassis
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-D/PUMP CN-485 CN-DISP CN-EEV CN-VANE2 CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-CC CN-AIRC
LOCATION POINT AC Power supply Fan motor output Drain pump output Communication Display EEV Output Step motor Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Dry contact Air clean
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC AC output for drain pump Connection between indoor and outdoor Display of indoor status EEV Control output Step motor output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Dry contact line Air cleaner control Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
3-12
Ceiling Cassette 4-way
TM/TN/TP Chassis
Cassette 4-way
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-D/PUMP CN-485 CN-DISP CN-EEV CN-VANE1 / VANE2 CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-CC CN-AIRC
LOCATION POINT AC Power supply Fan motor output Drain pump output Communication Display EEV Output Step motor Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Dry contact Air clean
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC AC output for drain pump Connection between indoor and outdoor Display of indoor status EEV Control output Step motor output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Dry contact line Air cleaner control Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Cassette 4-way
3-13
6. Capacity Tables
Cassette 4-way
6.1 Cooling Capacity
Capacity Index
1.6
2.2
2.8
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.5 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.4 1.4
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.7 1.6 1.6 1.5 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.9 0.8 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.2 1.1
2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.5 2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.2 1.2 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.0 1.0 1.0 1.0 1.0 1.0 0.9 0.9 0.8 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.8
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.8 1.7
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.6 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.6 1.5
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
3-14
Cooling capacity
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Cassette 4-way
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
Outdoor air temp. (DB, 째C)
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.3
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.2
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.1 2.0 1.9
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.1 1.9
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 2.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.8 3.6
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.8 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.8 3.8 3.7 3.5
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.8 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.8 3.7 3.7 3.4
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1 6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.1 3.1 3.1 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.9 2.8 2.8 2.7 2.7 2.6 2.6 2.5 2.3 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.6 3.5 3.5 3.5 3.4 3.3 3.3 3.2 3.2 2.9
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2 7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
3.3 3.2 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.8 2.7 2.6 2.6 2.4 4.1 4.0 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.4 3.3 3.2 2.9
5.6
Notes: TC: Total Capacity(kW)
Ceiling Cassette 4-way
SHC: Sensible Heat Capacity(kW)
3-15
Cassette 4-way
4.5
32 24 TC SHC kW kW
Cassette 4-way
Cooling capacity
Capacity Index
7.1
8.2
10.6
Outdoor air temp. (DB, 째C) 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
Notes: TC: Total Capacity(kW)
3-16
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
32 24 TC SHC kW kW
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.6 7.6 7.2 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.8 9.3
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5 9.8 9.8 9.8 9.8 9.7 9.6 9.5 9.4 9.4 9.3 9.2 9.0 8.9 8.8 8.6 8.5 8.3 8.1 7.5 12.7 12.7 12.7 12.6 12.5 12.4 12.3 12.2 12.1 12.0 11.8 11.7 11.5 11.3 11.2 11.0 10.7 10.5 9.7
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6 10.5 10.4 10.3 10.2 10.1 10.0 9.9 9.8 9.7 9.5 9.4 9.2 9.1 9.0 8.8 8.7 8.5 8.3 7.6 13.6 13.5 13.3 13.2 13.1 12.9 12.9 12.7 12.5 12.3 12.1 12.0 11.8 11.6 11.4 11.2 11.0 10.8 9.8
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 4.9 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3
4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9 6.9
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.7 5.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.4 7.1
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.1 8.0 7.9 7.8 7.3 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.5 10.4 10.2 10.0 9.5
5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.0 4.9 4.8 4.6 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.8 5.8 5.7 5.6 5.3 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.3 7.2 6.8
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.6 8.5 8.4 8.3 8.2 8.1 7.9 7.5 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.1 11.0 10.9 10.8 10.6 10.5 10.3 9.6
5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.5 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.0 5.9 5.9 5.8 5.7 5.6 5.5 5.2 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.8 7.8 7.7 7.6 7.5 7.4 7.3 7.2 6.7
5.0 5.0 5.0 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 3.8 5.7 5.7 5.7 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.3 5.2 5.1 5.0 5.0 4.8 4.8 4.4 7.4 7.4 7.4 7.4 7.3 7.2 7.2 7.1 7.1 7.0 6.9 6.8 6.7 6.6 6.5 6.4 6.3 6.2 5.7
5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.6 4.5 4.5 4.4 4.3 4.2 3.8 6.1 6.1 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.6 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.4 7.9 7.9 7.8 7.7 7.6 7.6 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.8 6.7 6.6 6.4 6.3 5.7
SHC: Sensible Heat Capacity(kW)
Ceiling Cassette 4-way
Cooling capacity
Capacity Index
14.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
32 24 TC SHC kW kW
8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.3 10.8 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.1 13.0 12.4
14.7 14.7 14.7 14.7 14.5 14.4 14.3 14.2 14.0 13.9 13.7 13.6 13.4 13.2 12.9 12.7 12.4 12.2 11.3 16.8 16.8 16.8 16.8 16.7 16.5 16.4 16.2 16.1 15.9 15.7 15.6 15.3 15.1 14.8 14.6 14.2 14.0 12.9
15.8 15.6 15.5 15.3 15.2 15.0 14.9 14.7 14.5 14.3 14.1 13.9 13.7 13.5 13.2 13.0 12.7 12.5 11.4 18.1 17.9 17.8 17.6 17.4 17.2 17.1 16.8 16.6 16.4 16.1 15.9 15.7 15.4 15.2 14.9 14.6 14.4 13.1
Notes: TC: Total Capacity(kW)
Ceiling Cassette 4-way
7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3
8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2 9.2
8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.6 8.2 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 9.9 9.4
12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.2 12.0 11.8 11.7 11.0 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 13.9 13.8 13.5 13.4 12.6
8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.8 8.7 8.5 8.4 7.9 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.0 9.9 9.7 9.6 9.1
13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 12.9 12.8 12.6 12.5 12.3 12.1 11.9 11.2 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 14.8 14.6 14.5 14.3 14.2 13.9 13.7 12.8
9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.0 8.9 8.8 8.7 8.6 8.4 8.3 7.8 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.4 10.3 10.2 10.1 10.0 9.9 9.7 9.5 8.9
8.6 8.6 8.6 8.6 8.5 8.4 8.4 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.4 7.3 7.1 6.6 9.8 9.8 9.8 9.8 9.7 9.6 9.6 9.5 9.4 9.3 9.2 9.1 8.9 8.8 8.7 8.5 8.3 8.2 7.6
9.2 9.1 9.0 9.0 8.9 8.8 8.7 8.6 8.5 8.3 8.2 8.1 8.0 7.9 7.7 7.6 7.4 7.3 6.7 10.6 10.5 10.4 10.3 10.2 10.1 10.0 9.8 9.7 9.6 9.4 9.3 9.1 9.0 8.9 8.7 8.5 8.4 7.6
SHC: Sensible Heat Capacity(kW)
3-17
Cassette 4-way
12.3
Outdoor air temp. (DB, 째C)
Cassette 4-way
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
1.6
2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
Heating capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.7 1.8 1.8 1.9 1.9 2.0 2.0 2.0 1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9 2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.7 1.8 1.8 1.9 1.9 1.9 1.9 1.9 1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.7 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5 2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
1.1 1.1 1.2 1.2 1.3 1.4 1.4 1.4 1.5 1.5 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
Notes: TC: Total Capacity(kW)
3-18
Ceiling Cassette 4-way
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
4.5
5.6
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6 3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8 4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3 3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4 4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0 3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0 4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
Cassette 4-way
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
Indoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
Ceiling Cassette 4-way
3-19
Cassette 4-way
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
7.1
8.2
10.6
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2 6.2 6.3 6.7 7.1 7.5 7.8 7.9 8.1 8.4 8.7 9.1 9.7 10.2 10.4 10.6 10.6 10.6 10.6 10.6
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6 6.2 6.3 6.7 7.0 7.5 7.8 7.9 8.1 8.4 8.7 9.1 9.7 9.8 9.8 9.8 9.8 9.8 9.8 9.8
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0 6.2 6.3 6.7 6.3 6.6 7.0 7.1 7.3 7.5 7.8 8.1 8.5 9.0 9.2 9.2 9.2 9.2 9.2 9.2
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 6.1 6.3 6.7 7.0 7.4 7.8 7.9 8.1 8.2 8.5 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 6.1 6.3 6.7 7.0 7.4 7.7 7.9 8.1 8.2 8.5 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 6.1 6.3 6.6 7.0 7.4 7.7 7.8 7.9 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
8.0 8.2 8.7 9.2 9.6 10.1 10.2 10.5 10.8 11.3 11.8 12.5 13.2 13.4 13.7 13.7 13.7 13.7 13.7
8.0 8.2 8.7 9.0 9.6 10.1 10.2 10.5 10.8 11.3 11.8 12.5 12.7 12.7 12.7 12.7 12.7 12.7 12.7
8.0 8.2 8.7 8.2 8.6 9.0 9.2 9.4 9.7 10.1 10.4 11.0 11.6 11.9 11.9 11.9 11.9 11.9 11.9
7.9 8.2 8.7 9.0 9.5 10.1 10.2 10.5 10.6 11.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
7.9 8.1 8.7 9.0 9.5 10.0 10.2 10.5 10.6 11.0 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2
7.9 8.1 8.6 9.1 9.5 10.0 10.1 10.2 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4
Notes: TC: Total Capacity(kW)
3-20
Ceiling Cassette 4-way
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
12.3
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
9.2 9.5 10.1 10.6 11.2 11.7 11.9 12.1 12.6 13.1 13.7 14.5 15.3 15.5 15.9 15.9 15.9 15.9 15.9
9.2 9.5 10.1 10.5 11.2 11.7 11.9 12.1 12.6 13.1 13.7 14.5 14.8 14.8 14.8 14.8 14.8 14.8 14.8
9.2 9.5 10.1 9.5 10.0 10.4 10.7 10.9 11.3 11.7 12.1 12.8 13.5 13.8 13.8 13.8 13.8 13.8 13.8
9.1 9.5 10.1 10.5 11.0 11.7 11.9 12.1 12.2 12.8 13.3 13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
9.1 9.4 10.1 10.5 11.0 11.6 11.9 12.1 12.2 12.8 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0
9.1 9.4 9.9 10.5 11.0 11.6 11.7 11.8 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1
14.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
10.7 11.0 11.6 12.2 12.9 13.5 13.7 14.0 14.5 15.1 15.7 16.7 17.7 17.9 18.3 18.3 18.3 18.3 18.3
10.7 11.0 11.6 12.1 12.9 13.5 13.7 14.0 14.5 15.1 15.7 16.7 17.0 17.0 17.0 17.0 17.0 17.0 17.0
10.7 11.0 11.6 10.9 11.5 12.0 12.3 12.6 13.0 13.5 13.9 14.7 15.5 15.9 15.9 15.9 15.9 15.9 15.9
10.5 11.0 11.6 12.1 12.7 13.5 13.7 14.0 14.1 14.7 15.3 15.4 15.4 15.4 15.4 15.4 15.4 15.4 15.4
10.5 10.8 11.6 12.1 12.7 13.4 13.7 14.0 14.1 14.7 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9
10.5 10.8 11.4 12.1 12.7 13.4 13.5 13.6 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9
Notes: TC: Total Capacity(kW)
Ceiling Cassette 4-way
3-21
Cassette 4-way
kW -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
7. Air Velocity and Temperature Distribution(Reference Data) ARNU05GTR*2, ARNU07GTR*2, ARNU09GTR*2 Cassette 4-way
Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m 2.0
2.0
2.0
1.5 1.0
1.5 1.0
2m
2.0 1.5
1.5 1.0
2.5m
1.5m
0m
1.5m
0m 2.5m
1.0 0.5
0.5
1m
0.5
0.5
2.5m
2m
1.5m
1m
0m
1.5m
0m 2.5m
Temperature [°C]
Temperature [°C]
2.7m
2.7m 33
2m
18
18 20
20
22
21
21 2m 27
18
24
27
18 24
24
1m
22
33
1m
24
2.5m
1.5m
0m
1.5m
0m 2.5m
2.5m
1.5m
0m
1.5m
0m 2.5m
ARNU12GTR*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s] 2.7m 2.0
2.7m 2.0 1.5
2.0
2m 1.5
2.0 1.5
1.0 1.0
1.0
0.5
2.5m
2m
1.5 1.0
0.5
1m
0.5
1m
0.5
1.5m
0m
1.5m
0m 2.5m
Temperature [°C]
2.5m
1.5m
0m
0m 2.5m
1.5m
Temperature [°C] 2.7m 18
2.7m 33
18
20
2m
20
22
33
30 24
22
2m
30
27
27
24
21
21
1m 24
2.5m
3-22
1.5m
1m
24
0m
1.5m
0m 2.5m
2.5m
1.5m
0m
1.5m
0m 2.5m
Ceiling Cassette 4-way
ARNU15GTQ*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
2.7m
2.7m 2.0
2.0
2.0 1.5
1m 0.5
1m
0m
1m
0.5
0.5
2m
3m
4m
0m
4m
3m
2m
1m
1.0
1.0
1m
0m
1m
2m
3m
4m
Temperature [°C]
Temperature [°C]
2.7m
2.7m 18
18 20
20
33
33
2m
2m 22
22
21
24
24
1m
27
24
24
3m
21
1m 27
4m
0m
2m
1m
0m
1m
2m
3m
4m
0m
4m
3m
2m
1m
0m
1m
2m
3m
4m
0m
ARNU18GTQ*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
2.7m
2.7m 2.0
2.0
2.0
1.5
2m
1.0
4m
3m
2m
1.5
1.5 1m
1.0
0.5 0m
1m
3m
4m
0m
4m
3m
2m
1m
1.0
0.5
2m
2m
1.5
1.0
0.5 1m
2.0
0.5
1m
0m
1m
2m
3m
4m
Temperature [°C]
Temperature [°C]
2.7m
2.7m 18 20
18
22
33
20
2m
30
22
24
3m
2m
33
2m
30
21
1m
4m
0m
21 24
27
27
1m
24
24
1m
0m
Ceiling Cassette 4-way
1m
2m
3m
4m
0m
4m
3m
2m
1m
0m
1m
2m
3m
4m
0m
3-23
Cassette 4-way
1.0
2m
1.5
1.5
0.5 3m
2m
2m 1.5
1.0
4m
2.0
ARNU24GTP*2 Cassette 4-way
Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
2.7m
2.7m 2.0
2.0
2m
2m 2.0
1.5
3m
1.0
1.0
1.0 4m
1m
1.5
2m
1m
0m
1m
3m
4m
0m
4m
2m
0.5
1m
0m
1m
2m
3m
4m
0m
Temperature [°C]
18 20 22
2.7m
2.7m
18 20 22
2m
23
24
2m
1m
0m
1m
2m
3m
4m
0m
4m
30
2m 22
22
3m
1m
24
24
27
23
24
33
33 30
1m
3m
3m
1m
1.0
0.5
2m
Temperature [°C]
4m
2.0
2m
1m
27
0m
1m
2m
3m
4m
0m
ARNU28GTP*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
2.7m 2.0
2m
2.0
1.0
1.0
1.0
2m
2m 1.5
1m
1.5
1.0 3m
2.7m
3.0 2.0
1.5
1m
1.5
4m
3.0 2.0
2.5
2.5
1m
0m
1m
2m
3m
4m
0m
0.5
4m
3m
2m
0.5
1m
0m
1m
2m
3m
4m
Temperature [°C]
Temperature [°C]
2.7m
2.7m 18
33
18
33
2m
2m 21 22
22 23
4m
3-24
3m
2m
0m
23
1m
0m
24
1m
1m
2m
3m
4m
0m
30
30
1m
27
4m
3m
2m
21
24
1m
0m
27 1m
2m
3m
4m
0m
Ceiling Cassette 4-way
ARNU36GTN*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
3.0 2.5 2.0
2.7m
3.0 2.5 2.0
2m
1.0 5m
4m
3m
1m
0m
1m
2m
4m
0m 5m
3m
2m
1.0
1m
2.7m
0m
1m
2m
3m
4m
0m 5m
22
23
1m
0m
2m
1m
2m
3m
4m
0m 5m
30
24 22
1m 23
2m
33
2m
20
22
2.7m
33
18
20
3m
4m
1m
Temperature [°C]
18
4m
5m
2m
2.0
1.0
3m
Temperature [°C]
5m
2.0
1.0 1m
2m
2.7m
3.5 3.0 2.5
30
27
5m
4m
3m
2m
1m
24 22
1m
4m
0m 5m
27
0m
1m
2m
3m
ARNU42GTM*2 Cooling
Heating
Discharge angle: 40°
Discharge angle: 50°
Air velocity [m/s]
Air velocity [m/s]
3.2m
3.2m 4.0
4.0
4.0 3.0
3.0
3.0
2m
3.0
4.0
2m
1m
5m
4m
3m
1m 2.0
2.0 1.0
2.0 1.0 1m
2m
0m
1m
2m
2.0
1.0
3m
4m
0m 5m
5m
4m
3m
2m
1.0
1m
0m
1m
2m
3m
4m
Temperature [°C]
Temperature [°C] 3.2m
3.2m
18
18
2m
20
22
22
4m
3m
2m
1m
0m
Ceiling Cassette 4-way
1m
2m
3m
33
30
30
4m
0m 5m
22
5m
4m
2m
24 22 27
24
24
33
24
20
1m
5m
0m 5m
3m
2m
1m
1m
27
0m
1m
2m
3m
4m
0m 5m
3-25
Cassette 4-way
1.5
1.5
3.5 3.0 2.5
ARNU48GTM*2 Cassette 4-way
Cooling
Heating
Discharge angle: 40째
Discharge angle: 50째
Air velocity [m/s]
Air velocity [m/s]
3.2m 4.0
1.0 4m
3m
2m
1m
0m
1m
2m
2m
3.0
3.0
1m
2.0 1.0
2.0
4.0
2m
3.0
3.0
5m
3.2m 4.0
4.0
1m 2.0
2.0
1.0
3m
4m
0m 5m
5m
4m
3m
2m
1m
1.0
0m
1m
2m
3m
4m
0m 5m
Temperature [째C]
Temperature [째C] 3.2m
3.2m 33
18
18
2m
20
20
33
2m 22
24
22
24
1m 22 24
5m
4m
3-26
24
3m
2m
1m
1m
0m
1m
2m
3m
30
30 27
22
4m
0m 5m
5m
4m
3m
2m
1m
27
0m
1m
2m
3m
4m
0m 5m
Ceiling Cassette 4-way
8. Electric Characteristicss Units Model
Type
Power Supply Hz
Volts
Voltage Range MCA
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
TR
1.25
15
0.043
0.2
30
30
ARNU07GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU09GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU12GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU15GTQ*2
TQ
1.25
15
0.043
0.2
30
30
ARNU18GTQ*2
TQ
1.25
15
0.043
0.2
30
30
1.22
15
0.03
0.17
33
33
50
220~240
MAX : 264 MIN:198
ARNU24GTP*2
TP
ARNU28GTP*2
TP
1.22
15
0.03
0.17
33
33
ARNU36GTN*2
TN
1.81
15
0.135
0.64
144
144
ARNU42GTM*2
TM
1.81
15
0.135
0.64
144
144
ARNU48GTM*2
TM
1.81
15
0.135
0.64
144
144
ARNU05GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU07GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU09GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU12GTR*2
TR
1.25
15
0.043
0.2
30
30
ARNU15GTQ*2
TQ
1.25
15
0.043
0.2
30
30
ARNU18GTQ*2
TQ
1.25
15
0.043
0.2
30
30
ARNU24GTP*2
TP
1.22
15
0.03
0.17
33
33
ARNU28GTP*2
TP
1.22
15
0.03
0.17
33
33
ARNU36GTN*2
TN
1.81
15
0.135
0.64
144
144
ARNU42GTM*2
TM
1.81
15
0.135
0.64
144
144
ARNU48GTM*2
TM
1.81
15
0.135
0.64
144
144
60
220
MAX : 242 MIN:198
Symbols: MCA : Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA ≤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the larger value on the MCA. 5. Instead of fuse, use Circuit Breaker.
Ceiling Cassette 4-way
3-27
Cassette 4-way
ARNU05GTR*2
9. Sound Levels
Cassette 4-way
Overall Notes: - Sound measured at 1.5m below the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
Ceiling 1.5m
Model H 29 29 30 32 36 37
ARNU05GTR*2 ARNU07GTR*2 ARNU09GTR*2 ARNU12GTR*2 ARNU15GTQ*2 ARNU18GTQ*2
Sound Level dB(A) L M 26 27 26 27 27 29 27 30 32 34 34 35
Sound Level dB(A) L M 34 31 35 33 40 37 41 38 43 41
Model H 36 39 43 44 46
ARNU24GTP*2 ARNU28GTP*2 ARNU36GTN*2 ARNU42GTM*2 ARNU48GTM*2
Sound Pressure Level ARNU07GTR*2
ARNU09GTR*2 80
70
70
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
125
250
500
1000
2000
4000
Octave Band Center Frequency (Hz)
3-28
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20 NC-15 8000
NC-65
60
10
NC-25 Approximate Hearing Threshold 63
Octave Band Sound Pressure Level (dB re 20µPa )
80
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU05GTR*2 80
NC-60
125
250
500
1000
2000
4000
Octave Band Center Frequency (Hz)
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
NC-20 NC-15 8000
NC-65
60
10
Approximate Hearing Threshold 63
NC-20
125
250
500
1000
2000
4000
NC-15 8000
Octave Band Center Frequency (Hz)
Ceiling Cassette 4-way
ARNU15GTQ*2 70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-60 50
NC-50
125
250
500
1000
2000
4000
NC-45
40
NC-40 NC-35
30
NC-30
NC-20
63
NC-55
10
NC-15 8000
NC-25 Approximate Hearing Threshold 63
125
ARNU24GTP*2
NC-55 NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
NC-65 NC-60
2000
4000
NC-15 8000
250
500
NC-45
40
NC-40 NC-35
30
NC-30 NC-25
10
Approximate Hearing Threshold 63
NC-15 1000 2000 4000 8000
125
250
500
1000
2000
4000
NC-15 8000
ARNU36GTN*2
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
10
NC-20
Octave Band Center Frequency (Hz)
70
NC-20
125
NC-50
80
NC-25 Approximate Hearing Threshold 63
250
500
NC-15 1000 2000 4000 8000
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
10
Approximate Hearing Threshold 63
125
NC-20
250
500
NC-15 1000 2000 4000 8000
Octave Band Center Frequency (Hz)
Octave Band Center Frequency (Hz)
ARNU42GTM*2
70
NC-20
125
Octave Band Center Frequency (Hz)
ARNU48GTM*2
80
80
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold 63
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
1000
20
NC-25 Approximate Hearing Threshold 63
10
500
NC-55
50
ARNU28GTP*2
70
50
NC-60
20
80
80
10
250
NC-65
60
Octave Band Center Frequency (Hz)
Octave Band Center Frequency (Hz)
60
70
NC-20
Octave Band Sound Pressure Level (dB re 20µPa )
10
Approximate Hearing Threshold
NC-65
60
20
NC-25
20
ARNU18GTQ*2 80
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
80
70
NC-60
125
250
500
Octave Band Center Frequency (Hz)
Ceiling Cassette 4-way
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20 NC-15 1000 2000 4000 8000
NC-65
60
10
NC-25 Approximate Hearing Threshold 63
125
NC-20
250
500
NC-15 1000 2000 4000 8000
Octave Band Center Frequency (Hz)
3-29
Cassette 4-way
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU12GTR*2 80
• Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Anti-bacteria filter
Air Intake
TEM
Remote Controll er
P
Air Outlet Wired Remote Controller(Optional)
Required Parts
Required Tools
• Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose
• Level • Screw driver • Electric drill • Hole core drill • Flaring Tool set • Torque Wrenches • Hexagonal Wrench • Gas-leak detector • Thermometer
3-30
50 or more
Ceiling Board
50 or more
30 or less
Ceiling Ceiling Board
Above 250 360 or less
• There should not be any heat source or steam near the unit. • There should not be any obstacles to the air circulation. • A place where air circulation in the room will be good. • A place where drainage can be easily obtained. • A place where noise prevention is taken into consideration. • Do not install the unit near the door way. • Ensure the spaces indicated by arrows from the wall, ceiling, or other obstacles. • The indoor unit must have sufficient maintenance space.
30 or more
10.1 Selection of the best location
100 or more
Cassette 4-way
10. Installation
Unit:cm Floor
Ceiling Cassette 4-way
10.2 Ceiling opening dimensions and hanging bolt location • The dimensions of the paper pattern for installation are the same as those of the ceiling opening dimensions.
Ceiling Ceiling board
Level gauge
TM/TN/TP Chassis 875(Ceiling opening)
517
461
CAUTION • This air-conditioner uses a drain pump. • Install the unit horizontally using a level gauge. • During the installation, care should be taken not to damage electric wires.
875(Ceiling opening)
517
Unit:mm
684(Hanging bolt)
840 Unit size 840 Unit size
671
319
570
585~660(Ceiling opening)
787(Hanging bolt)
570 523
Cassette 4-way
TQ/TR Chassis 585~660(Ceiling opening)
Unit:mm
• Select and mark the position for fixing bolts and piping hole. • Decide the position for fixing bolts slightly tilted to the drain direction after considering the direction of drain hose. • Drill the hole for anchor bolt on the wall.
NOTE: • Avoid the following installation location. 1. Such places as restaurants and kitchen where considerable amount of oil steam and flour is generated. These may cause heat exchange efficiency reduction, or water drops, drain pump mal-function. In these cases, take the following actions; • Make sure that ventilation fan is enough to cover all noxious gases from this place. • Ensure enough distance from the cooking room to install the air conditioner in such a place where it may not suck oily steam. Air conditioner
Take enough distance Use the ventilation fan for smoke-collecting hood with sufficient capacity. Cooking table
2. Avoid installng air conditioner in such places where cooking oil or iron powder is generated. 3. Avoid places where inflammable gas is generated. 4. Avoid place where noxious gas is generated. 5. Avoid places near high frequency generators.
Ceiling Cassette 4-way
3-31
Ceiling
Cassette 4-way
Nut (W3/8 or M10)
Flat washer for M10 (accessory) Ceiling board
150mm
Keep the length of the bolt from the bracket to 40mm
Hanging bolt (W3/8 or M10)
Air Conditioner body
Ceiling board Keep the length of 15~18mm between the air conditioner bottom surface and the ceiling surface
Flat washer for M10 (accessory) Nut (W3/8 or M10)
Set screw of paper model (4 pieces) Paper model for installation
• The following parts are locally purchased. Hanging Bolt - W 3/8 or M10 Nut - W 3/8 or M10 Spring Washer - M10 Plate Washer - M10
Open the ceiling board along the outer edge of the paper model
CAUTION • Tighten the nut and bolt to prevent the unit from falling.
10.3 Wiring Connection Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively. Indoor cord Remote control cord power cord
• TR/TQ Chassis Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
INTERNET DRY1 DRY2 GND 12V
IDU
A
-
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
• TM/TN/TP Chassis Terminal Block Indoor
Terminal Block Indoor
SODU
1(L) 2(N) 3(L) 4(N)
5(A) 5(B) RD
B
POWER INPUT
YL BK
A
IDU B
INTERNET DRY1 DRY2 GND 12V A
B
A
-
-
-
-
Outdoor Unit
TO AIR FRESH KIT
WARNING Make sure that the screws of the terminal are not loose.
3-32
Ceiling Cassette 4-way
10.4 Installation of Decoration Panel Before installing the decoration panel, always remove the paper template.
The decoration panel has its installation direction.
Piping side Air conditioner unit
Control box cover Decoration panel fixing screws (hexagon M5 screws) Temporally fitting at 2 places (Tightening about 10mm)
Louver motor
Decoration panel
Display Lead wire for louver motor and display
Decoration panel fixing screws (Hexagon M5 screw)
CAUTION Inlet Grille
Install certainly the decoration panel. Cool air leakage causes sweating.
Good example
Bad example Air conditioner unit
Air conditioner unit Air
Cool air leakage (no good)
Water drops fall. Ceiling board Decoration panel Fit the insulator (this part) and be careful for cool air leakage
Ceiling Cassette 4-way
Ceiling board Decoration panel
3-33
Cassette 4-way
1. Temporarily fix two decoration panel fixing screws (hexagon M5 screw) on the unit body. (Tighten by amount 10mm in length.) The fixing screws (hexagon M5 screw) are included in the indoor unit box. 2. Remove the air inlet grille from the decoration panel. (Remove the hook for the air inlet grille cord.) 3. Hook the decoration panel key hole ( ) on the screws fixed in step above, and slide the panel so that the screws reach the key hole edge. 4. Retighten completely two temporarily fixed screws and other two screws. (Total 4 screws) 5. Connect the louver motor connector and display connector. 6. After tightening these screws, install the air inlet grille (including the air filter).
• Drain piping must have down-slope (1/50 to 1/100): be sure not to provide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm. Piping material: Polyvinyl chloride pipe inner diometes Ø 25mm and pipe fittings
Upward routing not allowed
Pipe clamp Indoor unit
Maintenance drain port
• Be sure to install heat insulation on the drain piping.
1/50~1/100
Heat insulation material: Polyethylene foam with thickness more than 8 mm.
MAX 700mm
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation: Feed water
Flexible drain hose (accessory) Main drain pipe
Drain Pump
Drain port
Glue the joint
Drain hose connection Use the clip (accessory)
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. • Feed water to the flexible drain hose and check the piping for leakage. • Be sure to check the drain pump for normal operating and noise when electrical wiring is complete. • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
Drain pan
CAUTION The supplied flexible drain hose should not be strained. A strained hose may cause leakage of water.
Max 300mm
Hanger distance 1~15m
Metal clamp Flexible drain hose
Hanger Bracket 1/50~1/100 slope Max 700mm
Cassette 4-way
10.5 Indoor Unit Drain Piping
Insulation
CAUTION After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have separate power specially for the air conditioner. As for the method of wiring, follow the circuit diagram pasted on the inside of control box cover. 2) Provide a circuit breaker switch between power source and the unit. 3) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could give rise to burn-out of the wires.) 4) Confirm the specification of power source 5) Confirm that electrical capacity is sufficient. 6) Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 7) Confirm that the cable thickness is as specified in the power sources specification. (Particularly note the relation between cable length and thickness.) 8) Do not install the leakage breaker in a place which is wet or moist. Water or moist may cause short circuit. 9) The following troubles would be caused by voltage drop-down. • Vibration of a magnetic switch, damage on the contact point there of, fuse breaking, disturbance to the normal function of a overload protection device. • Proper starting power is not given to the compressor.
HAND OVER Teach the customer the operation and maintenance procedures, using the operation manual (air filter cleaning, temperature control, etc.).
3-34
Ceiling Cassette 4-way
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
TEMP
Cassette 4-way
- Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Ceiling Cassette 4-way
3-35
11. Accessories
Cassette 4-way
Standard Accessories Name
Drain hose
Clamp metal
Quantity
1 EA
2 EA
Shape
Washer for hanging backet 8 EA
Clamp (Tie Wrap)
Insulation for fitting
4 EA
1 SET
for gas pipe
Bolt
(Other)
4 EA • Paper pattern for installation • Owner's manual • Installation manual
for liquid pipe
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
3-36
Ceiling Cassette 4-way
1. List of Functions 2. Specifications 3. Dimensions & Gravity point 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. External Static Pressure(E.S.P) & Air Flow 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Concealed Duct - High Static
Ceiling Concealed Duct- High Static
Ceiling Concealed Duct (High Static)
Ceiling Concealed Duct- High Static
1. List of Functions Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GBHA2, ARNU09GBHA2, ARNU12GBHA2, ARNU15GBHA2, ARNU18GBHA2, ARNU24GBHA2, ARNU28GBGA2 , ARNU36GBGA2, ARNU42GBGA2, ARNU48GBRA2, URNU76GB8A2, URNU96GB8A2 1 3/3/3 X X O O O X O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O X O O O Accessory Accessory Accessory Accessory X Accessory Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
4-1
Ceiling Concealed Duct - High Static
2. Specifications Type Model
Heating Capacity Casing Dimensions(WxDxH) Body
mm inch
Rows x Columns x FPI Face Area m2 Type Motor Output x Number W Running Current A Air Flow Rate(H/M/L) CMM (High Mode-factory set) cfm Fan External Static Pressure mmAq(Pa) Air Flow Rate(H/M/L) CMM (Standard Mode) cfm External Static Pressure mmAq(Pa) Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Coil
Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
ARNU07GBHA2 2.2 1,900 7,500 2.5 2,200 8,500 Galvanized Steel Plate 882x450x260 34.7x17.7x10.2 2x10x21 0.15 Sirocco Fan 118 0.92 8.5/7.5/6 300/265/212 8(78) 8.5/8/7.5 300/282/265 6(59) Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø6.35(1/4) Ø12.7(1/2) 25.0 26(57.4) 34/33/32 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Ceiling Concealed Duct -High Static ARNU09GBHA2 ARNU12GBHA2 2.8 3.6 2,400 3,100 9,600 12,300 3.2 4.0 2,800 3,400 10,900 13,600 Galvanized Steel Plate Galvanized Steel Plate 882x450x260 882x450x260 34.7x17.7x10.2 34.7x17.7x10.2 2x10x21 2x10x21 0.15 0.15 Sirocco Fan Sirocco Fan 118 118 0.92 0.92 10/8.5/7.5 12/10/8.5 353/300/265 424/353/300 8(78) 8(78) 8.5/8/7.5 11/8.5/7.5 300/282/265 388/300/265 6(59) 6(59) Direct Direct BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) 25.0 25.0 26(57.4) 26(57.4) 35/34/33 37/35/34 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
Ceiling Concealed Duct - High Static
ARNU15GBHA2 4.5 3,900 15,400 5.0 4,300 17,100 Galvanized Steel Plate 882x450x260 34.7x17.7x10.2 2x10x21 0.15 Sirocco Fan 118 0.92 13.5/12/8.5 477/424/300 8(78) 13.5/12/11 477/424/388 6(59) Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Fuse Ø6.35(1/4) Ø12.7(1/2) 25.0 26(57.4) 39/38/37 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
4-2
Ceiling Concealed Duct- High Static
Cooling Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Ceiling Concealed Duct- High Static
Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body
mm inch
Rows x Columns x FPI Face Area m2 Type Motor Output x Number W Running Current A Air Flow Rate(H/M/L) CMM (High Mode-factory set) cfm Fan External Static Pressure mmAq(Pa) Air Flow Rate(H/M/L) CMM (Standard Mode) cfm External Static Pressure mmAq(Pa) Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Coil
Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
Ceiling Concealed Duct(High Static) ARNU18GBHA2 ARNU24GBHA2 ARNU28GBGA2 5.6 7.1 8.2 4,800 6,100 7,100 19,100 24,200 28,000 6.3 8.0 9.2 5,400 6,900 8,000 21,500 27,300 31,500 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate 882x450x260 882x450x260 1,182x450x298 34.7x17.7x10.2 34.7x17.7x10.2 46.5x17.7x11.7 3x10x21 3x10x21 3x12x21 0.15 0.15 0.26 Sirocco Fan Sirocco Fan Sirocco Fan 118 118 390 0.92 0.92 2.30 15.5/13.5/12.4 18.3/16.9/15.5 25.9/24.1/21.8 547/477/438 646/597/547 915/851/770 8(78) 8(78) 10(98) 15.3/13.6/10.3 19/16.4/14.5 25.3/21.8/17.6 540/480/364 671/579/512 893/770/622 6(59) 6(59) 8(78) Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Fuse Fuse Fuse Ø6.35(1/4) Ø9.52(3/8) Ø9.52(3/8) Ø12.7(1/2) Ø15.88(5/8) Ø15.88(5/8) 25.0 25.0 25.0 26.5(58.4) 26.5(58.4) 38(83.8) 42.5/41/37 45/43/41 44/42/40 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
4-3
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Concealed Duct - High Static
Cooling Capacity
Heating Capacity
Ceiling Concealed Duct(High Static) Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body
mm inch
Rows x Columns x FPI Face Area m2 Type Motor Output x Number W Running Current A Air Flow Rate(H/M/L) CMM (High Mode-factory set) cfm Fan External Static Pressure mmAq(Pa) Air Flow Rate(H/M/L) CMM (Standard Mode) cfm External Static Pressure mmAq(Pa) Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Coil
Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
ARNU36GBGA2 ARNU42GBGA2 ARNU48GBRA2 10.6 12.3 14.1 9,100 10,600 12,100 36,200 42,000 48,100 11.9 13.8 15.9 10,200 11,000 13,200 40,600 43,800 51,200 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate 1,182x450x298 1,182x450x298 1,230x590x380 46.5x17.7x11.7 46.5x17.7x11.7 48.4x23.2x15.0 3x12x21 3x12x21 3x13x19 0.26 0.26 0.38 Sirocco Fan Sirocco Fan Sirocco Fan 390 390 390 2.30 2.30 2.40 32.3/29/25.3 34.5/32.3/30.7 44.8/40.6/33.3 1,141/1,024/894 1,218/1,141/1,084 1,582/1,434/1,176 10(98) 10(98) 14(137) 28.4/25.3/21.8 32/28.4/27.2 44.4/39.5/33.5 1,003/893/770 1,130/1,003/961 1,568/1,395/1,183 8(78) 8(78) 10(98) Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Fuse Fuse Fuse Ø9.52(3/8) Ø9.52(3/8) Ø9.52(3/8) Ø15.88(5/8) Ø15.88(5/8) Ø15.88(5/8) 25.0 25.0 25.0 38(83.8) 38(83.8) 53(117) 46/44/42 48/46/45 45/43/41 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
Ceiling Concealed Duct - High Static
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
4-4
Ceiling Concealed Duct- High Static
Type Model
Ceiling Concealed Duct- High Static
Ceiling Concealed Duct(High Static) URNU76GB8A2 URNU96GB8A2 22.4 28.0 19,300 24,100 Cooling Capacity 76,400 95,900 25.2 31.5 21,700 27,100 Heating Capacity 86,000 107,500 Galvanized Steel Plate Galvanized Steel Plate Casing 1,562x688x460 1,562x688x460 mm Dimensions(WxDxH) Body 61.5x27.1x18.1 61.5x27.1x18.1 inch 3x21x19 3x21x19 Rows x Columns x FPI Coil 0.59 0.59 Face Area m2 Sirocco Fan Sirocco Fan Type 375x2 375x2 Motor Output x Number W 4.50 4.50 Running Current A 60/50/50 72/64/64 Air Flow Rate(H/M/L) CMM 2,119/1,766/1,766 2,542/2,260/2,260 (High Mode-factory set) cfm 22(216) 22(216) Fan External Static Pressure mmAq(Pa) 64/50/50 76/64/64 Air Flow Rate(H/M/L) CMM 2,260/1,766/1,766 2,684/2,260/2,260 (Standard Mode) cfm 15(147) 15(147) External Static Pressure mmAq(Pa) Direct Direct Drive BLDC BLDC Motor type Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Temperature Control Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Air Filter Fuse Fuse Safety Device Ø9.52(3/8) Ø9.52(3/8) Liquid Side mm(inch) Ø19.05(3/4) Ø22.2(7/8) Pipe Connections Gas Side mm(inch) 25.0 25.0 Drain Pipe(Internal Dia.) mm 87(192) 87(192) Net Weight kg(lbs) 50/48/48 52/50/50 Noise Level(Sound Press, 1.5m, H/M/L) dB(A) 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2 Type Model
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
4-5
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Concealed Duct - High Static
R3
7. 5
60
114
450
260
47
20
175
75
21
49
64
24
243
5
428
6
882
212
882
87 750
932
243
119
65
108
30
115
4
450 47
133 127 106
355
158
450
219 119
Ceiling Concealed Duct - High Static 1 2
100
50
70
260
29
51
3
123 140
48 52 165
31
Air suction
6
Unit size(7k, 9k, 12k, 15k, 18k):ø6.35 Unit size(24k):ø9.52 Unit size(7k, 9k, 12k, 15k, 18k):ø12.7 Unit size(24k):ø15.88
Descripition
(unit : mm)
Gravity point
CHASSIS CODE: BH
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Air discharge
5
Drain pipe connection Power supply connection
3 4
Gas pipe connection
Liquid pipe connection
Name
2
1
Number
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
101
ARNU07GBHA2 ARNU09GBHA2 ARNU12GBHA2 ARNU15GBHA2 ARNU18GBHA2 ARNU24GBHA2
Ceiling Concealed Duct (High Static)
Ceiling Concealed Duct- High Static
745
3. Dimensions & Gravity point
4-6
355
224
ø1 0
0
60
152
20
298
220
23
186
450
232
49
565
243
5
6
1,182
232
1,182
87 830
1,230
1,043
243
232
115
108
29
75
4
87
355 450 158 113
219 136
4-7
Ceiling Concealed Duct - High Static
224
1
100
50
2 261
165
3
122 140
47 53
32
Unit size(28k,36k,42k):ø15.88
Unit size(28k,36k,42k):ø9.52
Descripition
(unit : mm)
Gravity point
CHASSIS CODE: BG
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Air suction
Air discharge
5 6
Power supply connection
4
Drain pipe connection
Gas pipe connection
3
2
Name Liquid pipe connection
1
Number
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
102 51
ARNU28GBGA2 ARNU36GBGA2 ARNU42GBGA2
Ceiling Concealed Duct (High Static)
Ceiling Concealed Duct- High Static
0
R6
60
198
312
380
25
303
32
140
590
50
215
5
621
279
6
1,230
241
118 1,004
1,284 1,230
1,092
279 215
120
114
4
477 590 56 168 185 174
2
90
1
135 190 260
115
101 83
Air suction
6
(unit : mm)
Unit size(48k):ø15.88
Unit size(48k):ø9.52
Descripition
Gravity point
CHASSIS CODE: BR
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Air discharge
5
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
3
Drain pipe connection Power supply connection
4
Gas pipe connection
3
Liquid pipe connection
2
Name
1
Number
ARNU48GBRA2
Ceiling Concealed Duct (High Static)
26
122 144
72 123 221
Ceiling Concealed Duct- High Static
Ceiling Concealed Duct - High Static
4-8
302
460
460
688
20
440
318
293
5
329
819
6
1,562
320
1,220
1,562
1,622
1,396
329
115
4
688 30
222
560 64
290 161
4-9
Ceiling Concealed Duct - High Static
358
68
18
109
58
122 60 70 64
397
Gas pipe connection Drain pipe connection Power supply connection Air discharge Air suction
2 3 5 6
(unit : mm)
Unit size(76k):ø19.05 Unit size(96k):ø22.2
Unit size(76k,96k):ø9.52
Descripition
Gravity point
CHASSIS CODE: B8
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
4
Liquid pipe connection
Name
1
Number
3
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
1
40 99 1
70 120
2
URNU76GB8A2 URNU96GB8A2
Ceiling Concealed Duct (High Static)
Ceiling Concealed Duct- High Static
4. Piping Diagrams
:Cooling :Heating
EEV Filter
Th3
Ceiling Concealed Duct- High Static
Heat Exchanger Th2 Sirocco Fan
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
MODEL
GAS
LIQUID
ARNU07GBHA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GBHA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GBHA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GBHA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GBHA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GBHA2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU28GBGA2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU36GBGA2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU42GBGA2
Ø15.88(5/8)
Ø9.52(3/8)
ARNU48GBRA2
Ø15.88(5/8)
Ø9.52(3/8)
URNU76GB8A2
Ø19.05(3/4)
Ø9.52(3/8)
URNU96GB8A2
Ø22.2(7/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Concealed Duct - High Static
4-10
5. Wiring Diagrams Ceiling Concealed Duct- High Static
BH Chassis
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-D/PUMP CN-COM CN-EEV CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-ZON CN-DISPLAY CN-CC
LOCATION POINT AC Power supply Fan motor output Drain pump output Communication EEV Output Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Zontroller RF Remote controller Dry contact
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC AC output for drain pump Connection between indoor and outdoor EEV Control output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Zone control line RF Remote control line Dry contact line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
4-11
Ceiling Concealed Duct - High Static
BG Chassis Ceiling Concealed Duct- High Static
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-MOTOR2 CN-D/PUMP CN-COM CN-EEV CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-ZON CN-DISPLAY CN-CC
LOCATION POINT AC Power supply Fan motor output Fan motor output Drain pump output Communication EEV Output Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Zontroller RF Remote controller Dry contact
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC Motor output of BLDC AC output for drain pump Connection between indoor and outdoor EEV Control output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Zone control line RF Remote control line Dry contact line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Concealed Duct - High Static
4-12
Ceiling Concealed Duct- High Static
BR Chassis
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-MOTOR2 CN-D/PUMP CN-COM CN-EEV CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-ZON CN-DISPLAY CN-CC
LOCATION POINT AC Power supply Fan motor output Fan motor output Drain pump output Communication EEV Output Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Zontroller RF Remote controller Dry contact
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC Motor output of BLDC AC output for drain pump Connection between indoor and outdoor EEV Control output Float switch sensing Pipe in thermistor Pipe out thermistor Room air thermistor Remote control line Zone control line RF Remote control line Dry contact line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
4-13
Ceiling Concealed Duct - High Static
B8 Chassis Ceiling Concealed Duct- High Static
CONNECTOR NUMBER CN-POWER CN-MOTOR1, CN-MOTOR2 CN-D/PUMP CN-COM CN-EEV CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-CC CN-DISPLAY CN-OPTION CN-ZONE
LOCATION POINT AC Power supply Fan motor output Drain pump output Communication EEV Output Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Dry contact RF Remocon Option PCB Zone controller
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
FUNCTION AC Power line input for indoor controller Motor output of BLDC AC Output for drain pump Connection between indoor and outdoor EEV Control output Float switch sensing Pipe in thermistor Pipe out thermistor Room thermistor Remote control line Dry contact line RF Remocon receiver Option PCB connector Zone controller line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Concealed Duct - High Static
4-14
6. Capacity Tables 6.1 Cooling Capacity Ceiling Concealed Duct- High Static
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
Outdoor air temp. (DB, 째C)
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.5
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.5
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.8 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.3
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0 1.9
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.1 2.0 1.9
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.7 1.6
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.1 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.8 1.8 1.6
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.6 2.5
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.8 2.8 2.8 2.8 2.7 2.7 2.6 2.6 2.4
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.1
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.9 2.9 2.8 2.8 2.8 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.3 2.3 2.1
Notes: TC: Total Capacity(kW)
4-15
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Concealed Duct - High Static
Cooling capacity
23 16 TC SHC kW kW
4.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.2
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0
3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.1
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.4 3.4 3.3 3.2 3.0
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1
3.4 3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.8 2.8 2.6
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.4 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 3.9
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 4.0 3.9 3.7
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.0 4.0 3.9 3.6
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.9 3.8 3.8 3.8 3.7 3.7 3.6 3.5 3.5 3.4 3.3 3.1
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.3 4.3 4.2 4.2 4.2 4.1 4.1 4.0 4.0 3.9 3.8 3.8 3.7 3.7 3.6 3.6 3.5 3.4 3.1
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.0 4.8
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.1 5.0 4.9 4.6
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.1 5.1 5.0 4.9 4.9 4.6
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
5.0 5.0 5.0 5.0 5.0 4.9 4.9 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.2 4.2 3.9
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.6 4.5 4.5 4.3 4.3 3.9
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - High Static
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
4-16
Ceiling Concealed Duct- High Static
20 14 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
Ceiling Concealed Duct- High Static
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
8.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6
5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.6 7.6 7.2
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.6
8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.1 8.0 7.9 7.8 7.3
6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.0 5.9 5.8 5.8 5.4
8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.7 8.6 8.5 8.4 8.3 8.2 8.1 7.9 7.5
6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.2 6.2 6.1 6.0 6.0 5.9 5.8 5.7 5.3
9.8 9.8 9.8 9.8 9.7 9.6 9.5 9.4 9.4 9.3 9.2 9.0 8.9 8.8 8.6 8.5 8.3 8.1 7.5
5.9 5.9 5.9 5.9 5.8 5.7 5.7 5.7 5.6 5.6 5.5 5.4 5.3 5.3 5.2 5.1 5.0 4.9 4.5
10.5 10.4 10.3 10.2 10.1 10.0 9.9 9.8 9.7 9.5 9.4 9.2 9.1 9.0 8.8 8.7 8.5 8.3 7.6
6.3 6.3 6.2 6.1 6.1 6.0 6.0 5.9 5.8 5.7 5.6 5.5 5.5 5.4 5.3 5.2 5.1 5.0 4.6
10.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2
6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4
8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1
9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.8 9.3
7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.6 7.3
10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.6 10.5 10.4 10.2 10.0 9.5
7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.7 7.5 7.4 7.0
11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.3 11.1 11.0 10.9 10.8 10.6 10.5 10.3 9.6
8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 6.9
12.7 12.7 12.7 12.6 12.5 12.4 12.3 12.2 12.1 12.0 11.8 11.7 11.5 11.3 11.2 11.0 10.7 10.5 9.7
7.6 7.6 7.6 7.6 7.5 7.4 7.4 7.3 7.3 7.2 7.1 7.0 6.9 6.8 6.7 6.6 6.4 6.3 5.8
13.6 13.5 13.3 13.2 13.1 12.9 12.9 12.7 12.5 12.3 12.1 12.0 11.8 11.6 11.4 11.2 11.0 10.8 9.8
8.2 8.1 8.0 7.9 7.9 7.8 7.7 7.6 7.5 7.4 7.3 7.2 7.1 7.0 6.8 6.7 6.6 6.5 5.9
12.3
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3
7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9 9.9
8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3 8.3
11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.3 10.8
9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0 8.9 8.8 8.5
12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.3 12.2 12.0 11.8 11.7 11.0
9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.1 9.0 8.9 8.7 8.6 8.1
13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 13.1 12.9 12.8 12.6 12.5 12.3 12.1 11.9 11.2
9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.4 9.3 9.1 9.0 8.9 8.8 8.7 8.5 8.0
14.7 14.7 14.7 14.7 14.5 14.4 14.3 14.2 14.0 13.9 13.7 13.6 13.4 13.2 12.9 12.7 12.4 12.2 11.3
8.8 8.8 8.8 8.8 8.7 8.6 8.6 8.5 8.4 8.3 8.2 8.1 8.0 7.9 7.8 7.6 7.5 7.3 6.8
15.8 15.6 15.5 15.3 15.2 15.0 14.9 14.7 14.5 14.3 14.1 13.9 13.7 13.5 13.2 13.0 12.7 12.5 11.4
9.5 9.4 9.3 9.2 9.1 9.0 9.0 8.8 8.7 8.6 8.5 8.3 8.2 8.1 7.9 7.8 7.6 7.5 6.8
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
4-17
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Concealed Duct - High Static
Cooling capacity
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
32 24 TC SHC kW kW
Capacity Index
14.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6
11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4
9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5
13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.2 13.1 13.0 12.4
10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.1 9.7
14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 14.1 13.9 13.8 13.5 13.4 12.6
10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.3 10.2 10.0 9.9 9.3
15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 14.8 14.6 14.5 14.3 14.2 13.9 13.7 12.8
10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.7 10.6 10.5 10.4 10.2 10.1 10.0 9.8 9.2
16.8 16.8 16.8 16.8 16.7 16.5 16.4 16.2 16.1 15.9 15.7 15.6 15.3 15.1 14.8 14.6 14.2 14.0 12.9
10.1 10.1 10.1 10.1 10.0 9.9 9.8 9.7 9.7 9.6 9.4 9.3 9.2 9.1 8.9 8.8 8.6 8.4 7.8
18.1 17.9 17.8 17.6 17.4 17.2 17.1 16.8 16.6 16.4 16.1 15.9 15.7 15.4 15.2 14.9 14.6 14.4 13.1
10.8 10.8 10.7 10.5 10.4 10.3 10.3 10.1 10.0 9.8 9.7 9.5 9.4 9.3 9.1 9.0 8.8 8.6 7.8
22.4
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1 15.1
12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9 12.9
18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0
14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3 14.3
20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.9 20.6 19.7
15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.4 15.2 14.6
22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.4 22.1 21.9 21.5 21.2 20.0
15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.7 15.5 15.3 15.0 14.9 14.0
23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.8 23.5 23.3 23.0 22.7 22.5 22.1 21.7 20.4
16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.2 16.1 15.9 15.7 15.6 15.4 15.2 15.0 14.7 13.8
26.8 26.8 26.8 26.7 26.5 26.2 26.1 25.8 25.5 25.3 25.0 24.7 24.3 24.0 23.6 23.2 22.6 22.3 20.6
15.2 15.2 15.2 15.2 15.0 14.9 14.8 14.6 14.5 14.4 14.2 14.0 13.8 13.6 13.4 13.2 12.9 12.6 11.7
28.7 28.5 28.2 27.9 27.7 27.3 27.2 26.8 26.4 26.0 25.7 25.3 24.9 24.5 24.1 23.7 23.2 22.8 20.8
16.3 16.2 16.0 15.8 15.7 15.5 15.4 15.2 15.0 14.8 14.6 14.3 14.1 13.9 13.7 13.5 13.2 12.9 11.8
28.0
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9 18.9
16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1 16.1
22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5
17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8 17.8
26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.2 26.1 25.8 24.7
19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.3 19.0 18.2
28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 28.0 27.7 27.4 26.9 26.5 25.0
19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.6 19.4 19.2 18.8 18.6 17.5
29.8 29.8 29.8 29.8 29.8 29.8 29.8 29.8 29.8 29.8 29.8 29.4 29.1 28.8 28.4 28.1 27.6 27.1 25.5
20.2 20.2 20.2 20.2 20.2 20.2 20.2 20.2 20.2 20.2 20.1 19.9 19.7 19.5 19.2 19.0 18.7 18.4 17.2
33.5 33.5 33.5 33.4 33.1 32.7 32.6 32.3 31.9 31.6 31.3 30.9 30.4 30.0 29.5 29.0 28.3 27.8 25.7
19.0 19.0 19.0 19.0 18.8 18.6 18.5 18.3 18.1 17.9 17.7 17.5 17.3 17.0 16.7 16.5 16.1 15.8 14.6
35.9 35.6 35.3 34.9 34.6 34.2 34.0 33.5 33.0 32.5 32.1 31.6 31.1 30.6 30.1 29.7 29.0 28.5 26.0
20.4 20.2 20.0 19.8 19.6 19.4 19.3 19.0 18.7 18.5 18.2 17.9 17.7 17.4 17.1 16.9 16.4 16.2 14.7
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - High Static
SHC: Sensible Heat Capacity(kW)
4-18
Ceiling Concealed Duct- High Static
20 14 TC SHC kW kW
Outdoor air temp. (DB, 째C)
Ceiling Concealed Duct- High Static
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating capacity
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
2.2
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Notes: TC: Total Capacity(kW)
4-19
Ceiling Concealed Duct - High Static
Heating capacity
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
4.5
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4
5.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
7.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - High Static
4-20
Ceiling Concealed Duct- High Static
Outdoor air temp. Capacity Index DB(째C) WB(째C)
Ceiling Concealed Duct- High Static
Heating capacity
Outdoor air temp. Capacity Index DB(째C) WB(째C)
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
8.2
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
6.2 6.3 6.7 7.1 7.5 7.8 7.9 8.1 8.4 8.7 9.1 9.7 10.2 10.4 10.6 10.6 10.6 10.6 10.6
6.2 6.3 6.7 7.0 7.5 7.8 7.9 8.1 8.4 8.7 9.1 9.7 9.8 9.8 9.8 9.8 9.8 9.8 9.8
6.2 6.3 6.7 6.3 6.6 7.0 7.1 7.3 7.5 7.8 8.1 8.5 9.0 9.2 9.2 9.2 9.2 9.2 9.2
6.1 6.3 6.7 7.0 7.4 7.8 7.9 8.1 8.2 8.5 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9 8.9
6.1 6.3 6.7 7.0 7.4 7.7 7.9 8.1 8.2 8.5 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6 8.6
6.1 6.3 6.6 7.0 7.4 7.7 7.8 7.9 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0
10.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
8.0 8.2 8.7 9.2 9.6 10.1 10.2 10.5 10.8 11.3 11.8 12.5 13.2 13.4 13.7 13.7 13.7 13.7 13.7
8.0 8.2 8.7 9.0 9.6 10.1 10.2 10.5 10.8 11.3 11.8 12.5 12.7 12.7 12.7 12.7 12.7 12.7 12.7
8.0 8.2 8.7 8.2 8.6 9.0 9.2 9.4 9.7 10.1 10.4 11.0 11.6 11.9 11.9 11.9 11.9 11.9 11.9
7.9 8.2 8.7 9.0 9.5 10.1 10.2 10.5 10.6 11.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5
7.9 8.1 8.7 9.0 9.5 10.0 10.2 10.5 10.6 11.0 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2 11.2
7.9 8.1 8.6 9.1 9.5 10.0 10.1 10.2 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4 10.4
12.3
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
9.2 9.5 10.1 10.6 11.2 11.7 11.9 12.1 12.6 13.1 13.7 14.5 15.3 15.5 15.9 15.9 15.9 15.9 15.9
9.2 9.5 10.1 10.5 11.2 11.7 11.9 12.1 12.6 13.1 13.7 14.5 14.8 14.8 14.8 14.8 14.8 14.8 14.8
9.2 9.5 10.1 9.5 10.0 10.4 10.7 10.9 11.3 11.7 12.1 12.8 13.5 13.8 13.8 13.8 13.8 13.8 13.8
9.1 9.5 10.1 10.5 11.0 11.7 11.9 12.1 12.2 12.8 13.3 13.4 13.4 13.4 13.4 13.4 13.4 13.4 13.4
9.1 9.4 10.1 10.5 11.0 11.6 11.9 12.1 12.2 12.8 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0 13.0
9.1 9.4 9.9 10.5 11.0 11.6 11.7 11.8 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1 12.1
Notes: TC: Total Capacity(kW)
4-21
Ceiling Concealed Duct - High Static
Heating capacity
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
14.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
10.7 11.0 11.6 12.2 12.9 13.5 13.7 14.0 14.5 15.1 15.7 16.7 17.7 17.9 18.3 18.3 18.3 18.3 18.3
10.7 11.0 11.6 12.1 12.9 13.5 13.7 14.0 14.5 15.1 15.7 16.7 17.0 17.0 17.0 17.0 17.0 17.0 17.0
10.7 11.0 11.6 10.9 11.5 12.0 12.3 12.6 13.0 13.5 13.9 14.7 15.5 15.9 15.9 15.9 15.9 15.9 15.9
10.5 11.0 11.6 12.1 12.7 13.5 13.7 14.0 14.1 14.7 15.3 15.4 15.4 15.4 15.4 15.4 15.4 15.4 15.4
10.5 10.8 11.6 12.1 12.7 13.4 13.7 14.0 14.1 14.7 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9 14.9
10.5 10.8 11.4 12.1 12.7 13.4 13.5 13.6 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9 13.9
22.4
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
16.9 17.4 18.4 19.4 20.4 21.4 21.7 22.2 22.9 23.9 25.0 26.5 28.0 28.4 29.0 29.0 29.0 29.0 29.0
16.9 17.4 18.4 19.2 20.4 21.4 21.7 22.2 22.9 23.9 25.0 26.5 27.0 27.0 27.0 27.0 27.0 27.0 27.0
16.9 17.4 18.4 17.3 18.2 19.1 19.5 19.9 20.6 21.5 22.1 23.4 24.6 25.2 25.2 25.2 25.2 25.2 25.2
16.6 17.4 18.4 19.2 20.2 21.4 21.7 22.2 22.4 23.3 24.3 24.4 24.4 24.4 24.4 24.4 24.4 24.4 24.4
16.6 17.1 18.4 19.2 20.2 21.2 21.7 22.2 22.4 23.3 23.7 23.7 23.7 23.7 23.7 23.7 23.7 23.7 23.7
16.6 17.1 18.1 19.2 20.2 21.2 21.4 21.6 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0
28.0
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
21.1 21.7 23.0 24.3 25.5 26.8 27.1 27.7 28.7 29.9 31.2 33.1 35.0 35.4 36.2 36.2 36.2 36.2 36.2
21.1 21.7 23.0 23.9 25.5 26.8 27.1 27.7 28.7 29.9 31.2 33.1 33.7 33.7 33.7 33.7 33.7 33.7 33.7
21.1 21.7 23.0 21.6 22.7 23.8 24.4 24.9 25.7 26.8 27.6 29.2 30.8 31.5 31.5 31.5 31.5 31.5 31.5
20.8 21.7 23.0 23.9 25.2 26.8 27.1 27.7 28.0 29.1 30.3 30.5 30.5 30.5 30.5 30.5 30.5 30.5 30.5
20.8 21.4 23.0 23.9 25.2 26.5 27.1 27.7 28.0 29.1 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6 29.6
20.8 21.4 22.7 24.0 25.2 26.5 26.8 27.0 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6 27.6
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - High Static
4-22
Ceiling Concealed Duct- High Static
Outdoor air temp. Capacity Index DB(째C) WB(째C)
Ceiling Concealed Duct- High Static
7. External Static Pressure (E.S.P) & Air Flow ARNU07GBHA2, ARNU09GBHA2, ARNU12GBHA2 ARNU15GBHA2, ARNU18GBHA2, ARNU24GBHA2 Setting Value 70 80 90 100 110 120 130 140 145 150
(Unit: CMM)
Static Pressure(mmAq(Pa)) 3(29) 4.1 7.6 10.7 13.4 15.9 18.6 19.8 22.3 23.2 24.3
4(39) 8.1 11.2 13.2 16.2 18.8 21.1 22.2 23.1
5(49) 6.3 9.6 12.6 15.2 18.0 20.3 21.4 22.3
6(59) 4.9 7.5 10.3 12.8 15.3 17.7 19.1 21.1
7(69) 4.0 7.7 11.1 14.2 17.1 18.4 19.8
8(78) 5.5 9.1 12.4 15.5 16.9 18.3
9(88) 6.7 10.4 13.7 15.3 16.8
ARNU28GBGA2, ARNU36GBGA2, ARNU42GBGA2 Setting Value 70 80 90 100 110 120 130 140 143 150 160
91 96 101 106 111 116 121 126
12(118) 5.7 9.7 11.8 13.0
(Unit: CMM)
Static Pressure(mmAq(Pa)) 5(49) 4.0 12.1 17.0 21.4 25.8 30.0 36.0 37.5 41.0 42.4
6(59) 6.9 15.5 19.6 24.0 28.5 32.1 33.9 38.0 41.6
7(69) 4.13 11.01 17.53 21.8 26.93 30.41 32.1 36.0 38.2
8(78) 6.2 14.0 19.8 25.3 29.0 30.7 34.5 36.1
9(88) 4.2 11.6 17.9 23.4 27.4 28.8 32.1 35
10(98) 6.6 14.6 21.8 25.9 27.2 30.1 34.6
ARNU48GBRA2 Setting Value
10(98) 5.3 8.8 12.6 13.8 15.2
12(118) 12.1 18.1 21.6 23.0 26.3 31.1
14(137) 14.6 17.8 20.1 22.4 26.8
16(157) 11.3 14.5 16.8 18.2 23.3
(Unit: CMM) Static Pressure(mmAq(Pa))
5(49) 46.5 49.9 52.1 51.4 53.6 62.3 67.0 68.2
6(59) 43.7 46.1 50.2 51.2 53.7 61.0 64.8 67.5
8(78) 38.2 43.0 47.9 50.4 52.9 60.3 64.1 66.2
10(98) 12(118) 14(137) 15(147) 16(157) 17(168) 18(176) 20(196) 31.3 23.2 14.0 9.0 3.7 33.5 31.1 18.4 13.7 9.0 2.6 39.5 37.4 27.3 25.2 17.8 8.9 6.1 44.4 43.1 33.3 32.1 28.9 21.0 17.9 8.3 49.9 48.3 40.6 40.2 32.8 31.5 27.2 17.5 55.7 50.8 44.8 42.6 40.1 37.6 32.5 27.6 58.2 52.2 50.8 50.3 45.7 44.6 38.8 32.2 65.1 64.3 57.4 54.4 51.2 50.4 46.0 43.5
Note: 1. The above table shows the correlation between the air rates and E.S.P.
4-23
Ceiling Concealed Duct - High Static
URNU76GB8A2, URNU96GB8A2 Static Pressure(mmAq) 6(59)
9(88)
12(118)
15(147)
18(177)
20(196)
22(216)
23(226)
25(245)
60
40.5
-
-
-
-
-
-
-
-
65
52.7
-
-
-
-
-
-
-
-
70
63.7
47.1
-
-
-
-
-
-
-
75
71.1
56.9
44.7
-
-
-
-
-
-
80
76.3
69.7
55.2
-
-
-
-
-
-
85
83.3
78.6
67.4
55.9
-
-
-
-
-
91
89.7
87.1
78.9
67.6
54.2
-
-
-
-
95
93.4
91.4
86.1
77.0
66.4
50.6
30.0
-
-
100
93.4
91.4
88.3
84.9
75.9
69.5
60.8
43.1
-
105
93.2
91.3
88.3
84.9
81.1
77.4
69.2
67.9
51.3
Note: 1. The above table shows the correlation between the air rates and E.S.P.
Ceiling Concealed Duct - High Static
4-24
Ceiling Concealed Duct- High Static
Setting Value
(Unit: CMM)
Ceiling Concealed Duct- High Static
ARNU07GBHA2, ARNU09GBHA2, ARNU12GBHA2 ARNU15GBHA2, ARNU18GBHA2, ARNU24GBHA2 Capacity
High 7k Standard High 9k Standard High 12k Standard High 15k Standard High (factory set) 18k Standard
24k
Standard Set value ESP(mmAq(Pa))
Mode
High (factory set) Standard
Hl Mid Low Hl Mid Low Hl Mid Low Hl Mid Low Hl Mid Low Hl Mid Low Hl Mid Low Hl Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low
120 117 115 110 107 105 125 120 117 110 107 105 130 125 120 115 110 105 135 130 120 123 120 115 140 135 130 130 125 110 150 145 140 145 135 128
8(78) 6(59) 8(78) 6(59) 8(78) 6(59) 8(78) 6(59) 8(78) 6(59) 8(78) 6(59)
CMM 8.5 7.5 6 8.5 8 7.5 10 8.5 7.5 8.5 8 7.5 12 10 8.5 11 8.5 7.5 13.5 12 8.5 13.5 12 11 15.5 13.5 12.4 15.3 13.6 10.3 18.3 16.9 15.5 19 16.4 14.5
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
6(59)
12(118)
4(39)
8(78)
6(59)
12(118)
4(39)
8(78)
6(59)
12(118)
4(39)
8(78)
6(59)
12(118)
4(39)
8(78)
6(59)
12(118)
4(39)
8(78)
6(59)
12(118)
4(39)
8(78)
ARNU28GBGA2, ARNU36GBGA2, ARNU42GBGA2 Capacity
28k
High (factory set) Standard
36k
High (factory set) Standard High (factory set)
42k Standard
4-25
Standard Set value ESP(mmAq(Pa))
Mode HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low
140 136 130 130 124 116 151 145 139 138 130 124 157 154 151 145 138 134
10(98) 8(78) 10(98) 8(78) 10(98) 8(78)
CMM 25.9 24.1 21.8 25.3 21.8 17.6 32.3 29 25.3 28.4 25.3 21.8 34.5 32.3 30.7 32 28.4 27.2
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
8(78)
16(157)
6(59)
10(98)
8(78)
14(137)
6(59)
10(98)
8(78)
12(118)
6(59)
10(98)
Ceiling Concealed Duct - High Static
ARNU48GBRA2 Standard Set value ESP(mmAq(Pa))
Mode High (factory set)
48k Standard
HI Mid Low HI Mid Low
116 111 106 106 101 96
14(137) 10(98)
CMM 44.8 40.6 33.3 44.4 39.5 33.5
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
10(98)
20(196)
7(67)
14(137)
URNU76GB8A2, URNU96GB8A2 Capacity
Standard Set value ESP(mmAq(Pa))
Mode High
76k Standard High 96k Standard
HI Mid Low HI Mid Low HI Mid Low HI Mid Low
Ceiling Concealed Duct - High Static
102 98 98 86 83 83 105 102 102 94 89 89
22(216) 15(147) 22(216) 15(147)
CMM 60 50 50 64 50 50 72 64 64 76 64 64
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
12(118)
25(245)
12(118)
25(245)
12(118)
25(245)
12(118)
25(245)
4-26
Ceiling Concealed Duct- High Static
Capacity
8. Electric Characteristics Ceiling Concealed Duct- High Static
Units
Power Supply
Input(W)
MFA
kW
FLA
2.32
15
0.118
1.06
150
150
BH
2.32
15
0.118
1.06
150
150
ARNU12GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU15GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU18GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU24GBHA2
BH
Max:264
2.32
15
0.118
1.06
150
150
ARNU28GBGA2
BG
Min:198
4.31
15
0.39
2.65
450
450
ARNU36GBGA2
BG
4.31
15
0.39
2.65
450
450
ARNU42GBGA2
BG
4.31
15
0.39
2.65
450
450
ARNU48GBRA2
BR
4.45
15
0.39
2.76
450
450
URNU76GB8A2
B8
7.47
15
0.75
5.18
800
800
URNU96GB8A2
B8
7.47
15
0.75
5.18
800
800
ARNU07GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU09GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU12GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU15GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU18GBHA2
BH
2.32
15
0.118
1.06
150
150
ARNU24GBHA2
BH
Max:242
2.32
15
0.118
1.06
150
150
ARNU28GBGA2
BG
Min:198
4.31
15
0.39
2.65
450
450
ARNU36GBGA2
BG
4.31
15
0.39
2.65
450
450
ARNU42GBGA2
BG
4.31
15
0.39
2.65
450
450
ARNU48GBRA2
BR
4.45
15
0.39
2.76
450
450
URNU76GB8A2
B8
7.47
15
0.75
5.18
800
800
URNU96GB8A2
B8
7.47
15
0.75
5.18
800
800
Model
Type
ARNU07GBHA2
BH
ARNU09GBHA2
Symbols: MCA : Min, Circuit Amps(A) MFA : Max. Fuse Amps(Notes) kW : Fan Motor Rated Output(kW) FLA : Full Load Amps(A) IFM : Indoor Fan Motor
Hz
50
60
Volts
220~ 240
220
Voltage Range MCA
IFM
Cooling Heating
Note : 1. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above the listed range limits, 2. Maximum allowable voltage unbalance between phases is 2% 3. MCA/MFA MCA=1.25 x FLA + 1 MFA≤ 4 x FLA (Next lower standard fuse rating. Min. 15A) 4. Select wire size based on the MCA 5. Instead of fuse, use Circuit Breaker.
4-27
Ceiling Concealed Duct - High Static
9. Sound Levels Overall SUCTION
DUCT
DUCT 1.5m
2m
Model
1m 1m
Sound Level dB(A)
Ceiling Concealed Duct- High Static
DISCHARGE
Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
Sound Level dB(A)
Model
ARNU07GBHA2
H 34
M 33
L 32
ARNU28GBGA2
H 44
M 42
L 40
ARNU09GBHA2
35
34
33
ARNU36GBGA2
46
44
42
ARNU12GBHA2
37
35
34
ARNU42GBGA2
48
46
45
ARNU15GBHA2
39
38
37
ARNU48GBRA2
45
43
41
ARNU18GBHA2
42.5
41
37
URNU76GB8A2
50
48
48
ARNU24GBHA2
45
43
41
URNU96GB8A2
52
50
50
Sound Pressure Level ARNU09GBHA2
ARNU12GBHA2 80
70
70
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
Ceiling Concealed Duct - High Static
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
NC-65
60
10
NC-25 Approximate Hearing Threshold 63
Octave Band Sound Pressure Level (dB re 20µPa )
80
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU07GBHA2 80
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
NC-65
60
10
NC-25 Approximate Hearing Threshold 63
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
4-28
ARNU18GBHA2 70
NC-65 NC-60 NC-55 NC-50 NC-45
40
NC-40 NC-35
30
NC-30
20
10
NC-25 Approximate Hearing Threshold 63
NC-60
250
500
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
NC-20
125
NC-65
60
NC-15 1000 2000 4000 8000
10
Approximate Hearing Threshold 63
250
500
NC-15 1000 2000 4000 8000
NC-60
NC-50
NC-40
NC-30 20
10
NC-55 NC-50 NC-45 NC-40 NC-35 NC-30
20
10
NC-25 Approximate Hearing Threshold 63
NC-60
NC-50
250
500
NC-15 1000 2000 4000 8000
NC-45
40
NC-40 NC-35
30
NC-30
10
Approximate Hearing Threshold 63
ARNU48GBRA2
80
70
70
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
125
250
500
NC-15 1000 2000 4000 8000
NC-15 1000 2000 4000 8000
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
10
NC-25 Approximate Hearing Threshold 63
125
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
10
Approximate Hearing Threshold 63
125
250
500
Octave Band Center Frequency (Hz)
500
NC-15 1000 2000 4000 8000
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
NC-20 NC-15 1000 2000 4000 8000
250
URNU96GB8A2
80
NC-65
NC-20
Octave Band Center Frequency (Hz)
URNU76GB8A2
60
NC-20
Octave Band Center Frequency (Hz)
4-29
Octave Band Sound Pressure Level (dB re 20µPa )
80
NC-65
500
NC-15 1000 2000 4000 8000
NC-65
Octave Band Center Frequency (Hz)
Octave Band Center Frequency (Hz)
60
250
500
60
NC-20
125
250
20
NC-25
20
NC-20
125
NC-55
50
Octave Band Sound Pressure Level (dB re 20µPa )
NC-60
NC-65
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
70
60
125
ARNU42GBGA2
ARNU36GBGA2
NC-65
NC-20
Octave Band Center Frequency (Hz)
70
30
NC-25 Approximate Hearing Threshold 63
80
40
NC-35
30
80
50
NC-45
40
80
60
NC-55
50
Octave Band Center Frequency (Hz)
ARNU28GBGA2
NC-65
60
NC-20
125
Octave Band Center Frequency (Hz)
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
80
50
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU24GBHA2
80
60
Octave Band Sound Pressure Level (dB re 20µPa )
Ceiling Concealed Duct- High Static
ARNU15GBHA2 80
10
Approximate Hearing Threshold 63
NC-20
125
250
500
NC-15 1000 2000 4000 8000
Octave Band Center Frequency (Hz)
Ceiling Concealed Duct - High Static
10. Installation
Air outlet vents
Ceiling Concealed Duct- High Static
• Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Air filters
Air intake vents TEMP
Wired LCD Remote Control
Remote Controller
Required Parts
Required Tools
• Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose
• Level • Screw driver • Electric drill • Hole core drill • Flaring Tool set • Torque Wrenches • Hexagonal Wrench • Gas-leak detector • Thermometer
10.1 Selection of the best location Install the air conditioner in the location that satisfies the following conditions. • The place shall easily bear a load exceeding four times the indoor unit’s weight. • The place shall be able to inspect the unit as the figure. • The place where the unit shall be leveled. • The place shall allow easy water drainage.(Suitable dimension “H” is necessary to get a slope to drain as figure.) • The place shall easily connect with the outdoor unit. • The place where the unit is not affected by an electrical noise. • The place where air circulation in the room will be good . • There should not be any heat source or steam near the unit. • The servicing inspection hole in the ceiling should be as large as the product • The selection of the servicing hole should be approved by the customer
Ceiling Concealed Duct - High Static
[Inspection Hole Standard] Number of Inspection hole
Distance between False ceiling & Actual ceiling
1
More than 100cm
2
20cm to 100cm
Hole size should be more than the size of IDU.
Less than 20cm
Remarks Sufficient space in the ceiling for servicing. Insufficient space. Difficult for servicing Minimum height for motor replacement.
4-30
BH/BG/BR Chassis
A B
■ Installation of Unit Install the unit above the ceiling correctly.
C E
CASE 1
D
POSITION OF SUSPENSION BOLT
(G)
F
• Apply a joint-canvas between the unit and duct to absorb unnecessary vibration. • Apply a filter Accessory at air return hole. • Refer to the Dimensions. (Unit:mm)
I
Ceiling Concealed Duct- High Static
10.2 Ceiling dimension and hanging bolt location
Dimension
A
B
C
D
E
F
(G)
H
I
932
882
355
47
450
30
87
750
158
BG
1232
1182
355
47
450
30
87
830
186
BR
1282 1230
477
56
590
30
H
Chassis
BH
120 1006 294
Drainage hole
B8 Chassis
(Unit:mm) Dimension
A
B
C
D
E
F
G
H
I
J
K
L
Chassis
B8
1680 1565 1160 330 460 580 700 1400 1635 390 445 15
• Install the unit leaning to a drainage hole side as a figure for easy water drainage.
CASE 2 POSITION OF CONSOLE BOLT • A place where the unit will be leveled and that can support the weight of the unit. • A place where the unit can withstand its vibration. • A place where service can be easily performed.
M10 Nut
X4 (Local M10 SP. washer X 4 supply) M10 washer X4
M10 washer
X4
(Local M10 SP. washer X 4 supply) M10 Nut X4
4-31
Ceiling Concealed Duct - High Static
NOTE:
• Select and mark the position for fixing bolts. • Drill the hole for set anchor on the face of ceiling.
• Insert the set anchor and washer onto the suspension bolts for locking the suspension bolts on the ceiling. • Mount the suspension bolts to the set anchor firmly. • Secure the installation plates onto the suspension bolts (adjust level roughly) using nuts, washers and spring washers.
Old building
New building
1 Set anchor 2 Plate washer 3 Spring washer 4 Nut
CAUTION
5 Suspension bolts
Tighten the nut and bolt to prevent unit falling.
10.3 Connecting Cables between Indoor Unit and Outdoor Unit Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING Make sure that the screws of the terminal are not loose.
Clamping of cables 1) Arrange 2 power cables on the control panel. 2) First, fasten the steel clamp with a screw to the inner boss of control panel. 3) For the cooling model, fix the other side of the clamp with a screw strongly. For the heat pump model, put the 0.75mm2 cable(thinner cable) on the clamp and tighten it with a plastic clamp to the other boss of the control panel.
Ceiling Concealed Duct - High Static
4-32
Ceiling Concealed Duct- High Static
• Throughly study the following installation locations: 1. In such places as restaurants and kitchens, considerable amount of oil steam and flour adhere to the fan, the fin of the heat exchanger, resulting in heat exchange reduction, spraying, dispersing of water drops, etc. In these cases, take the following actions: • Make sure that the ventilation fan for smoke-collecting hood on a cooking table has sufficient capacity so that it draws oily steam which should not flow into the suction of the air conditioner. • Make enough distance from a cooking room to install the air conditioner in such a place where it may not suck in oil steam. 2. Avoid installing air conditioner in such circumstances where cutting oil mist or iron powder is in suspension in factories, etc. 3. Avoid places where inflammable gas is generated, flows in, is stored or vented. 4. Avoid places where sulfurous acid gas or corrosive gas is generated. 5. Avoid places near high frequency generators.
Ceiling Concealed Duct- High Static
THERMAL INSULATION
All thermal insulation must comply with local requirement.
INDOOR UNIT BH/BG/BR Chassis
Union for liquid pipe
Thermal insulator for refrigerant pipe (Local supply) Thermal insulator for piping(Local supply)
Refrigerant pipe and thermal insulator(Local supply) Hose clamp for thermal insulator (Local supply)
B8
Thermal insulator for refrigerant pipe (Local supply) Union for gas pipe
Overlap with thermal insulator for piping. Hose clamp for thermal insulator(Local supply) Make sure that there is no clearance here.
Union for gas pipe Thermal insulator for refrigerant pipe (Local supply) Hose crip for thermal insulator (Local supply) Refrigerant pipe and therma insulator(Local supply)
Union for liquid pipe
10.4 Checking the Drainage 1) Checking the Drainage
BH/BG/BR Chassis
1. Remove the Air Filter.
B8
2. Check the drainage. • Spray one or two glasses of water on the evaporator. • Ensure that water flows through drain hose of indoor unit without any leakage.
4-33
Ceiling Concealed Duct - High Static
10.5 Indoor Unit Drain Piping
Indoor unit
Maintenance drain port
Piping material: Polyvinyl chloride pipe inner diometes Ø 25mm and pipe fittings • Be sure to install heat insulation on the drain piping.
1/50~1/100
Heat insulation material: Polyethylene foam with thickness more than 8 mm.
MAX 700mm
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation: Feed water
Drain Pump
Flexible drain hose (accessory)
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. Main drain pipe • Feed water to the flexible drain hose and check the piping for leakage. Drain • Be sure to check the drain pump for normal operation and port Glue the joint noise when electrical wiring is complete. Drain hose connection Use the clip (accessory) • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
Drain pan
The supplied flexible drain hose should not be strained. A strained hose may cause leakage of water.
Hanger distance 1~15m
Hanger Bracket 1/50~1/100 slope
Metal clamp
Max 700mm
CAUTION
Max 300mm
Flexible drain hose Insulation
Flexible drain hose Flexible drain hose Flexible drain hose
Ceiling Concealed Duct - High Static
4-34
Ceiling Concealed Duct- High Static
• Drain piping must have down-slope (1/50 to 1/100): be sure not to provide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm.
Upward routing not allowed
Pipe clamp
Ceiling Concealed Duct- High Static
10.6 Ground drain piping a) It is standard work practice to make connections to the main pipe from above. The pipe down from the combination should be as large as possible.
Face the vent pipe opening facing downward to keep foreign matter from penetrating the system Face piping downward Vent pipe
b) The pipe work should be kept as short as possible and the number of indoor units per group kept to a minimum.
10.7 Use of an auxiliary drain hose(flexible) a) To connect drain pipe to the drain socket on the indoor unit, an auxiliary flexible drain hose should be used. auxiliary flexible drain hose allows that the drain pipe can be connected to the socket without breaking by excessive strain. Auxiliary drain hose
Thermal insulation (drain pipe area)
Metal clamp
Metal clamp Thermal insulation(bend area) Drain pan
â?ˆ Important points - The drain pipe should be at least equal in size to that of the indoor unit. - The drain pipe is thermally insulated to prevent the formation of condensation inside the pipe. - The drain up mechanism should be fitted before the indoor unit is installed and when the electricity has been connected some water should be added to the drain pan and the drain pump to check and see if it is functioning correctly. - All connections should be secure. (Special care is needed with PVC pipe) - Insulate auxiliary drain hose with thermal insulation band.
4-35
Ceiling Concealed Duct - High Static
WIRED REMOTE CONTROLLER INSTALLATION
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Ceiling Concealed Duct - High Static
4-36
Ceiling Concealed Duct- High Static
• Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
11. Accessories Ceiling Concealed Duct- High Static
Standard Accessories Name
Drain hose
Clamp metal
Quantity
1 EA
1 EA
Washer for hanging backet 8 EA
Clamp (Tie Wrap)
Insulation for fitting
4 EA
1 SET
(Other)
• Owner's manual • Installation manual Shape
for gas pipe
for liquid pipe
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
4-37
Ceiling Concealed Duct - High Static
1. List of Functions 2. Specifications 3. Dimensions & Gravity point 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. External Static Pressure (E.S.P) & Air Flow 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Concealed Duct - Low Static
Ceiling Concealed Duct- Low Static
Ceiling Concealed Duct (Low Static)
Ceiling Concealed Duct- Low Static
1. List of Functions Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GB1G2, ARNU09GB1G2, ARNU12GB1G2, ARNU15GB1G2, ARNU18GB2G2, ARNU24GB2G2 1 3/3/3 X X O O O X O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O X O O O Accessory Accessory Accessory Accessory X Accessory Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
5-1
Ceiling Concealed Duct - Low Static
2. Specifications
Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body
mm inch
Rows x Columns x FPI Face Area m2 Type Motor Output x Number W Running Current A Air Flow Rate(H/M/L) CMM (High Mode-factory set) cfm Fan External Static Pressure mmAq(Pa) Air Flow Rate(H/M/L) CMM (Standard Mode) cfm External Static Pressure mmAq(Pa) Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Coil
Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
Ceiling Concealed Duct (Low Static) ARNU07GB1G2 ARNU09GB1G2 ARNU12GB1G2 2.2 2.8 3.6 1,900 2,400 3,100 7,500 9,600 12,300 2.5 3.2 4.0 2,200 2,800 3,400 8,500 10,900 13,600 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate 820 x 575 x 190 820 x 575 x 190 820 x 575 x 190 32.3 x 21.7 x 7.5 32.3 x 21.7 x 7.5 32.3 x 21.7 x 7.5 2x11x21 2x11x21 2x11x21 0.16 0.16 0.16 Sirocco Fan Sirocco Fan Sirocco Fan 28 28 28 0.15 0.15 0.15 8.5/7.5/6.5 9.5/8.5/7.5 10.5/9.5/8.5 300/265/229 335/300/265 371/335/300 2(20) 2(20) 2(20) 8.5/7.5/6.5 9.5/8.5/7.5 10.5/9.5/8.5 300/265/229 335/300/265 371/335/300 0(0) 0(0) 0(0) Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Fuse Fuse Fuser Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) 25.4 25.4 25.4 21(46.3) 21(46.3) 21(46.3) 35/33/31 36/35/33 37/36/35 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
Ceiling Concealed Duct - Low Static
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
5-2
Ceiling Concealed Duct- Low Static
Type Model
Ceiling Concealed Duct (Low Static) ARNU15GB1G2 ARNU18GB2G2 ARNU24GB2G2 4.5 5.6 7.1 3,900 4,800 6,100 Cooling Capacity 15,400 19,100 24,200 5.0 6.3 8.0 4,300 5,400 6,900 Heating Capacity 17,100 21,500 27,300 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate Casing 820 x 575 x 190 1,100 x 575 x 190 1,100 x 575 x 190 mm Dimensions(WxDxH) Body 32.3 x 21.7 x 7.5 43.3 x 21.7 x 7.5 43.3 x 21.7 x 7.5 inch 2x11x21 3x10x18 3x10x18 Rows x Columns x FPI Coil 0.16 0.23 0.23 Face Area m2 Sirocco Fan Sirocco Fan Sirocco Fan Type 28 76 76 Motor Output x Number W 0.15 0.38 0.38 Running Current A 11.5/10.5/9.5 16/14/12 19/17/15 Air Flow Rate(H/M/L) CMM 406/371/335 565/494/424 671/600/530 (High Mode-factory set) cfm 2(20) 2(20) 2(20) Fan External Static Pressure mmAq(Pa) 11.5/10.5/9.5 16/14/12 19/17/15 Air Flow Rate(H/M/L) CMM 406/371/335 565/494/424 671/600/530 (Standard Mode) cfm 0(0) 0(0) 0(0) External Static Pressure mmAq(Pa) Direct Direct Direct Drive BLDC BLDC BLDC Motor type Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Temperature Control Foamed polystrene Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Air Filter Fuser Fuse Fuse Safety Device Ø6.35(1/4) Ø6.35(1/4) Ø9.52(3/8) Liquid Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø15.88(5/8) Pipe Connections Gas Side mm(inch) 25.4 25.4 25.4 Drain Pipe(Internal Dia.) mm 21(46.3) 26(57.3) 26(57.3) Net Weight kg(lbs) 38/37/36 40/37/34 43/40/37 Noise Level(Sound Press, 1.5m, H/M/L) dB(A) 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2
Ceiling Concealed Duct- Low Static
Type Model
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve 6. Noise Level is Standard Mode (for actual High Mode(factory set) condition, Noise Level may exceed the standard level by 1.5dB(A))
5-3
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Concealed Duct - Low Static
575
18
154
383
18
B1 : 448 B2 : 573
D
B A
C
6
5 13
161 14 B1 : 186 B2 : 175 B1 : 73 B2 : 81
4
3
65 60
190
2
1
Gas pipe connection Drain pipe connection Power supply connection Air discharge Air suction
2 3 4 5 6
1072
Descripition
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: B1/B2
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
Gravity point
794
D
(unit : mm)
1131
856
C
Unit size(7k, 9k, 12k, 15k, 18k):ø6.35 Unit size(24k):ø9.52 Unit size(7k, 9k, 12k, 15k, 18k):ø12.7 Unit size(24k):ø15.88
1008
728
B
(unit: mm)
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Liquid pipe connection
Name
1100
820
A
1
Number
ARNU18GB2G2 ARNU24GB2G2
ARNU07GB1G2 ARNU09GB1G2 ARNU12GB1G2 ARNU15GB1G2
ARNU07GB1G2 ARNU09GB1G2 ARNU12GB1G2 ARNU15GB1G2 ARNU18GB2G2 ARNU24GB2G2
Ceiling Concealed Duct- Low Static
Ceiling Concealed Duct - Low Static 216 24
Ceiling Concealed Duct (Low Static)
3. Dimensions & Gravity point
5-4
277
190
Ceiling Concealed Duct- Low Static
4. Piping Diagrams
Heat Exchanger
EEV Filter
Th3
:Cooling :Heating
Th2 Sirocco Fan
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
5-5
MODEL
GAS
LIQUID
ARNU07GB1G2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GB1G2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GB1G2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GB1G2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GB2G2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GB2G2
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Concealed Duct - Low Static
5. Wiring Diagrams B1/B2 Chassis Ceiling Concealed Duct- Low Static
CONNECTOR NUMBER CN-MOTOR1 CN-MOTOR2 CN-PIPE/OUT CN-PIPE/IN CN-ROOM CN-REMO CN-FLOAT CN-EEV CN-D/PUMP CN-OPTION CN-COM CN-D/PUMP CN-POWER CN-ZONE CN-DISPLAY CN-CC
SPEC. Fan motor output Fan motor output Discharge pipe thermistor Suction pipe sensor Room sensor Remote controller Float switch input EEV output Drain pump output Option PWB. Communication Drain pump output AC power supply Zone Controller RF Remote controller Dry contact
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
DESCRIPTION Motor output of BLDC Motor output of BLDC Pipe out thermistor Pipe in thermistor Room thermistor Remote control line Float switch sensing EEV control output AC output for drain pump Communication between main and option Communication between indoor and outdoor AC output for drain pump AC power line input for indoor controller Zone control line RF remote control line Dry contact line Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling Concealed Duct - Low Static
5-6
6. Capacity Tables Ceiling Concealed Duct- Low Static
6.1 Cooling Capacity
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.2 2.1 2.0
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.0
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
5-7
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Concealed Duct - Low Static
Cooling capacity
23 16 TC SHC kW kW
4.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 2.9
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 2.9
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1
3.2 3.2 3.2 3.2 3.1 3.1 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.7 2.6 2.4
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2
3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.7 2.5
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.7
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.8 3.6
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.5
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.9 3.9 3.9 3.8 3.8 3.8 3.8 3.7 3.7 3.6 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.2 3.0
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.0
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.7
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.8 4.8 4.5
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.4
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
4.9 4.9 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 4.1 3.8
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.2 5.2 5.1 5.1 5.0 5.0 5.0 4.9 4.8 4.8 4.7 4.6 4.5 4.5 4.4 4.3 4.2 4.2 3.8
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - Low Static
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
5-8
Ceiling Concealed Duct- Low Static
20 14 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
Ceiling Concealed Duct- Low Static
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
2.2
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Notes: TC: Total Capacity(kW)
5-9
Ceiling Concealed Duct - Low Static
Heating capacity
4.5
5.6
7.1
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8 4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4 4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0 4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - Low Static
5-10
Ceiling Concealed Duct- Low Static
Outdoor air temp. Capacity Index DB(째C) WB(째C)
7. External Static Pressure (E.S.P) & Air Flow Ceiling Concealed Duct- Low Static
ARNU07GB1G2, ARNU09GB1G2, ARNU12GB1G2, ARNU15GB1G2 Setting Value 60 65 70 75 80 85 90 95 100 105 110 115
Static Pressure(mmAq(Pa)) 0(0) 6.02 6.95 7.69 8.46 9.5 10.35 10.81 11.57 12.58 13.31 14.2 14.82
1(10) 2.25 3.32 5.16 6.93 7.37 8.72 9.66 10.31 11.22 12.27 13.24 13.92
2(20)
3(29)
4(39)
0.61 0.73 1.19 2.42 3.4 5.33 6.75 8.56 9.75 10.89 12.15 12.64
0.54 0.65 0.77 0.87 1.35 3.15 4.73 7.46 8.64 10.49 11.16
0.48 0.56 0.63 0.72 0.88 0.98 1.03 2.31 5.01 7.7 9.48
ARNU18GB2G2, ARNU24GB2G2 Setting Value 65 70 75 80 85 90 95 100 105 110 115 120 125 130
(Unit: CMM)
(Unit: CMM) Static Pressure(mmAq(Pa))
0(0)
1(10)
2(20)
3(29)
4(39)
10.07 11.39 12.01 13.21 14.24 15.04 16.02 17.11 17.99 19.04 19.77 20.94 21.97 22.83
6.9 8.49 9.79 11.03 12.36 13.34 14.63 15.56 16.53 17.71 18.62 19.92 20.56 21.98
0.82 2.2 4.2 5.92 9.41 10.8 12.5 13.66 15.17 16.22 17.1 18.56 19.25 20.75
0.92 2.1 5.29 7.59 11.53 12.35 14.23 15.23 16.98 17.68 19.32
1.01 1.34 5.35 7.67 10.45 13.25 14.66 16.06 17.73
Note : 1. The above table shows the correlation between the air rates and E.S.P.
5-11
Ceiling Concealed Duct - Low Static
ARNU07GB1G2, ARNU09GB1G2, ARNU12GB1G2, ARNU15GB1G2
7k
High (factory set) Standard
9k
Standard Set value ESP(mmAq(Pa))
Mode
High (factory set) Standard High (factory set)
12k Standard High (factory set) 15k Standard
HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low
94 92 86 75 69 62 99 94 92 82 75 69 103 99 94 89 80 75 107 105 99 95 89 82
2(20) 0(0) 2(20) 0(0) 2(20) 0(0) 2(20) 0(0)
CMM 8.5 7.5 6.5 8.5 7.5 6.5 9.5 8.5 7.5 9.5 8.5 7.5 10.5 9.5 8.5 10.5 9.5 8.5 11.5 10.5 9.5 11.5 10.5 9.5
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
ARNU18GB2G2, ARNU24GB2G2 Capacity
18k
High (factory set) Standard
24k
Standard Set value ESP(mmAq(Pa))
Mode
High (factory set) Standard
HI Mid Low HI Mid Low HI Mid Low HI Mid Low
Ceiling Concealed Duct - Low Static
110 101 93 95 84 75 125 115 105 110 100 90
2(20) 0(0) 2(20) 0(0)
CMM 16 14 12 16 14 12 19 17 15 19 17 15
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
-
4(39)
-
4(39)
-
4(39)
-
4(39)
5-12
Ceiling Concealed Duct- Low Static
Capacity
8. Electric Characteristics Units Ceiling Concealed Duct- Low Static
Model
Type
Power Supply Hz
Volts
Voltage Range MCA
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
ARNU07GB1G2
B1
1.22
15
0.028
0.17
30
30
ARNU09GB1G2
B1
1.22
15
0.028
0.17
30
30
ARNU12GB1G2
B1
Max:264
1.22
15
0.028
0.17
30
30
ARNU15GB1G2
B1
Min:198
1.22
15
0.028
0.17
30
30
ARNU18GB2G2
B2
1.55
15
0.076
0.44
80
80
ARNU24GB2G2
B2
1.55
15
0.076
0.44
80
80
ARNU07GB1G2
B1
1.22
15
0.028
0.17
30
30
ARNU09GB1G2
B1
1.22
15
0.028
0.17
30
30
ARNU12GB1G2
B1
Max:242
1.22
15
0.028
0.17
30
30
ARNU15GB1G2
B1
Min:198
1.22
15
0.028
0.17
30
30
ARNU18GB2G2
B2
1.55
15
0.076
0.44
80
80
ARNU24GB2G2
B2
1.55
15
0.076
0.44
80
80
50
60
220~240
220
Symbols: MCA : Min, Circuit Amps(A) MFA : Max. Fuse Amps(Notes) kW : Fan Motor Rated Output(kW) FLA : Full Load Amps(A) IFM : Indoor Fan Motor Note : 1. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above the listed range limits, 2. Maximum allowable voltage unbalance between phases is 2% 3. MCA/MFA MCA=1.25 x FLA + 1 MFA≤ 4 x FLA (Next lower standard fuse rating. Min. 15A) 4. Select wire size based on the MCA 5. Instead of fuse, use Circuit Breaker.
5-13
Ceiling Concealed Duct - Low Static
9. Sound Levels Overall
1.5m
Ceiling 2.0m
Ceiling Concealed Duct- Low Static
Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
Microphone
Model Name ARNU07GB1G2 ARNU09GB1G2 ARNU12GB1G2 ARNU15GB1G2 ARNU18GB2G2 ARNU24GB2G2
Sound Levels dB(A) H M 35 33 36 35 37 36 38 37 40 37 43 40
L 31 33 35 36 34 37
Sound Pressure Level ARNU09GB1G2
70
70
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-20 10
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
63
NC-55
50
NC-25 Approximate Hearing Threshold 63
ARNU15GB1G2
250
500
NC-60 NC-55 NC-50 NC-45 NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold 63
NC-15 1000 2000 4000 8000
NC-45 NC-40 NC-35
30
NC-30
10
NC-25 Approximate Hearing Threshold 63
NC-20
125
250
500
NC-15 1000 2000 4000 8000
Octave Band Center Frequency (Hz)
ARNU24GB2G2 80
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
Ceiling Concealed Duct - Low Static
Octave Band Sound Pressure Level (dB re 20µPa )
NC-65
40
NC-50
ARNU18GB2G2
70
50
NC-55
40
NC-20
80
60
NC-60 50
Octave Band Center Frequency (Hz)
80
10
125
NC-65
60
20
10 63
Octave Band Sound Pressure Level (dB re 20µPa )
10
NC-60
20
NC-25 Approximate Hearing Threshold
NC-65
60
Octave Band Sound Pressure Level (dB re 20µPa )
80
20
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU12GB1G2
80
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU07GB1G2 80
70
NC-60
125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
NC-20 NC-15
NC-65
60
10
Approximate Hearing Threshold 63
NC-20 NC-15
125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
5-14
Ceiling Concealed Duct- Low Static
10. Installation • Please read the instruction sheets completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Required Parts
Required Tools
• Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose
• Level • Screw driver • Electric drill • Hole core drill • Flaring Tool set • Torque Wrenches • Hexagonal Wrench • Gas-leak detector • Thermometer
10.1 Selection of the best location Install the air conditioner in the location that satisfies the following conditions. • The place shall easily bear a load exceeding four times the indoor unit’s weight. • The place shall be able to inspect the unit as given in the figure. • The place where the unit shall be leveled. • The place shall allow easy water drainage.(Suitable dimension “H” is necessary to get a slope to drain as figure.) • The place shall easily connect with the outdoor unit. • The place where the unit is not affected by an electrical noise. • The place where air circulation in the room will be good . • There should not be any heat source or steam near the unit. • The servicing inspection hole in the ceiling should be as large as the product. • The selection of the servicing hole should be approved by the customer.
[Inspection Hole Standard] Number of Inspection hole
Distance between False ceiling & Actual ceiling
1
More than 100cm
2
20cm to 100cm
Hole size should be more than the size of IDU.
Less than 20cm
Remarks Sufficient space in the ceiling for servicing. Insufficient space. Difficult for servicing Minimum height for motor replacement.
Inspection hole (600X600) Control box
Top view (unit: mm)
600
600
Front view
H
5-15
Ceiling Concealed Duct - Low Static
Ceiling Concealed Duct- Low Static
10.2 Ceiling dimension and hanging bolt location ■ Installation of Unit Install the unit above the ceiling correctly.
CASE 1 POSITION OF SUSPENSION BOLT
M10 Nut
X4
M10 washer
X4
M10 washer
X4
M10 Nut
X8
• Apply a joint-canvas between the unit and duct to absorb unnecessary vibration.
• Install the unit leaning to a drainage hole side as a figure for easy water drainage.
CASE 2 POSITION OF CONSOLE BOLT • A place where the unit will be leveled and that can support the weight of the unit. • A place where the unit can withstand its vibration. • A place where service can be easily performed.
NOTE: • Throughly study the following installation locations: 1. In such places as restaurants and kitchens, considerable amount of oil steam and flour adhere to the fan, the fin of the heat exchanger, resulting in heat exchange reduction, spraying, dispersing of water drops, etc. In these cases, take the following actions: • Make sure that the ventilation fan for smoke-collecting hood on a cooking table has sufficient capacity so that it draws oily steam which should not flow into the suction of the air conditioner. • Make enough distance from a cooking room to install the air conditioner in such a place where it may not suck in oil steam. 2. Avoid installing air conditioner in such circumstances where cutting oil mist or iron powder is in suspension in factories, etc. 3. Avoid places where inflammable gas is generated, flows in, is stored or vented. 4. Avoid places where sulfurous acid gas or corrosive gas is generated. 5. Avoid places near high frequency generators.
Ceiling Concealed Duct - Low Static
5-16
• Spray one or two glasses of water on the evaporator. • Ensure that water flows drain hose of indoor unit without any leakage.
10.4 Indoor Unit Drain Piping Upward routing not allowed
• Drain piping must have down-slope (1/50 to 1/100): be sure not to pro- Pipe clamp vide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the Indoor unit drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm. Piping material: Polyvinyl chloride pipe inner diometes Ø 25mm and pipe fittings
Maintenance drain port
• Be sure to install heat insulation on the drain piping. 1/50~1/100
Heat insulation material: Polyethylene foam with thickness more than 8 mm.
MAX 700mm
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation: Feed water
Flexible drain hose (accessory) Main drain pipe
Drain Pump
Drain port
Glue the joint
Drain hose connection Use the clip (accessory)
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. • Feed water to the flexible drain hose and check the piping for leakage. • Be sure to check the drain pump for normal operating and noise when electrical wiring is complete. • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
Drain pan
CAUTION The supplied flexible drain hose should not be strained. A strained hose may cause leakage of water.
Max 300mm
Hanger distance 1~15m
Metal clamp Flexible drain hose
Hanger Bracket 1/50~1/100 slope Max 700mm
Ceiling Concealed Duct- Low Static
10.3 Checking the Drainage
Insulation
5-17
Flexible drain hose
Ceiling Concealed Duct Flexible drain hose Flexible drain hose - Low Static
10.5 Ground drain piping
Face the vent pipe mouth downward to keep foreign matter from penetrating the system Face piping downward Vent pipe
b) The pipe work should be kept as short as possible and the number of indoor units per group kept to a minimum.
10.6 Use of an auxiliary drain hose(flexible) a) To connect drain pipe to the drain socket on the indoor unit, an auxiliary flexible drain hose should be used. auxiliary flexible drain hose allows that the drain pipe can be connected to the socket without breaking by excessive strain. Auxiliary drain hose
Thermal insulation (drain pipe area)
Metal clamp
Metal clamp Thermal insulation(bend area) Drain pan
â?ˆ Important points - The drain pipe should be at least equal in size to that of the indoor unit. - The drain pipe is thermally insulated to prevent the formation of condensation inside the pipe. - The drain up mechanism should be fitted before the indoor unit is installed and when the electricity has been connected some water should be added to the drain pan and the drain pump to check and see if it is functioning correctly. - All connections should be secure. (Special care is needed with PVC pipe) - Insulate auxiliary drain hose with thermal insulation band.
Ceiling Concealed Duct - Low Static
5-18
Ceiling Concealed Duct- Low Static
a) It is standard work practice to make connections to the main pipe from above. The pipe down from the combination should be as large as possible.
Ceiling Concealed Duct- Low Static
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
5-19
Ceiling Concealed Duct - Low Static
11. Accessories Standard Accessories Drain hose
Clamp metal
Quantity
1 EA
2 EA
Washer for hanging backet 8 EA
Clamp (Tie Wrap)
Insulation for fitting
(Other)
1 SET
4 EA
• Owner's manual • Installation manual Shape
for gas pipe
for liquid pipe
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
Ceiling Concealed Duct - Low Static
5-20
Ceiling Concealed Duct- Low Static
Name
Ceiling Concealed Duct- Built in
6
Ceiling Concealed Duct (Built in) 1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. External Static Pressure (E.S.P) & Air Flow 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Ceiling Concealed Duct - Built in
1. List of Functions
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
Ceiling Concealed Duct- Built in
Function
Category
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) 1 3/3/3 X X O O O X O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O X O O O Accessory Accessory Accessory Accessory X Accessory Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
Ceiling Concealed Duct - Built in
6-1
Ceiling Concealed Duct- Built in
2. Specification Ceiling Concealed Duct (Built-in) PBSGB30/PBSC30 PBSGB30/PBSC30 PBSGB30/PBSC30 Unit ARNU07GB3G2 ARNU09GB3G2 ARNU12GB3G2 kW 2.2 2.8 3.6 Cooling Capacity kcal/h 1,900 2,400 3,100 Btu/h 7,500 9,600 12,300 kW 2.5 3.2 4.0 Heating Capacity kcal/h 2,200 2,800 3,400 Btu/h 8,500 10,900 13,600 Casing Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate mm 820 x 575 x 190 820 x 575 x 190 820 x 575 x 190 Dimensions(WxDxH) Body inch 32.3x22.6x7.5 32.3x22.6x7.5 32.3x22.6x7.5 Rows x Columns x FPI 2x11x21 2x11x21 2x11x21 Coil Face Area m2 0.16 0.16 0.16 Type Sirocco Fan Sirocco Fan Sirocco Fan Motor Output x Number W 30 30 30 Running Current A 0.15 0.15 0.15 Air Flow Rate(H/M/L) CMM 8/6.5/5.5 9/7/6 10/8/6.5 (High Mode-factor set) cfm 283/229/194 318/247/212 353/283/229 Fan External Static Pressure mmAq(Pa) 2(20) 2(20) 2(20) Air Flow Rate(H/M/L) CMM 8/6.5/5.5 9/7/6 10/8/6.5 (Standard Mode) cfm 283/229/194 318/247/212 353/283/229 External Static Pressure mmAq(Pa) 0(0) 0(0) 0(0) Drive Direct Direct Direct Motor type BLDC BLDC BLDC Temperature Control Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Sound Absorbing Thermal Insulation Material Foamed polystrene Foamed polystrene Foamed polystrene Air Filter Safety Device Fuse, Thermal Fuse for Fan Motor Fuse, Thermal Fuse for Fan Motor Fuse, Thermal Fuse for Fan Motor Liquid Side mm(inch) Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Pipe Connections Gas Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) Drain Pipe(Internal Dia.) mm 25.4 25.4 25.4 Net Weight kg(lbs) 21(46.3) 21(46.3) 21(46.3) Noise Level(Sound Press, 1m, H/M/L) dB(A) 37/34/33 39/35/34 40/37/34 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 Refrigerant Control EEV EEV EEV Power cable mm2 CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Transmission cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Type Accessory Model
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without notification 4. EEV: Electronic Expansion Valve 5. To be added for more available Models
6-2
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling Concealed Duct - Built in
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without notification 4. EEV: Electronic Expansion Valve 5. To be added for more available Models
Ceiling Concealed Duct - Built in
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
6-3
Ceiling Concealed Duct- Built in
Ceiling Concealed Duct (Built-in) PBSGB30/PBSC30 PBSGB40/PBSC40 PBSGB40/PBSC40 Unit ARNU15GB3G2 ARNU18GB4G2 ARNU24GB4G2 kW 4.5 5.6 7.1 Cooling Capacity kcal/h 3,900 4,800 6,100 Btu/h 15,400 19,100 24,200 kW 5.0 6.3 8.0 Heating Capacity kcal/h 4,300 5,400 6,900 Btu/h 17,100 21,500 27,300 Casing Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate mm 820 x 575 x 190 1,100 x 575 x 190 1,100 x 575 x 190 Dimensions(WxDxH) Body inch 32.3x22.6x7.5 32.3x22.6x7.5 32.3x22.6x7.5 Rows x Columns x FPI 2x11x21 3x10x18 3x10x18 Coil Face Area m2 0.16 0.23 0.23 Type Sirocco Fan Sirocco Fan Sirocco Fan Motor Output x Number W 30 80 80 Running Current A 0.15 0.38 0.38 Air Flow Rate(H/M/L) CMM 11/10/8 14/12/10 17/15/10 (High Mode-factor set) cfm 388/353/283 494/424/353 600/530/353 Fan External Static Pressure mmAq(Pa) 2(20) 2(20) 2(20) Air Flow Rate(H/M/L) CMM 11/10/8 14/12/10 17/15/10 (Standard Mode) cfm 388/353/283 494/424/353 600/530/353 External Static Pressure mmAq(Pa) 0(0) 0(0) 0(0) Drive Direct Direct Direct Motor type BLDC BLDC BLDC Temperature Control Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Sound Absorbing Thermal Insulation Material Foamed polystrene Foamed polystrene Foamed polystrene Air Filter Safety Device Fuse, Thermal Fuse for Fan Motor Fuse, Thermal Fuse for Fan Motor Fuse, Thermal Fuse for Fan Motor Liquid Side mm(inch) Ø6.35(1/4) Ø6.35(1/4) Ø9.52(3/8) Pipe Connections Gas Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø15.88(5/8) Drain Pipe(Internal Dia.) mm 25.4 25.4 25.4 Net Weight kg(lbs) 21(46.3) 26(57.3) 26(57.3) Noise Level(Sound Press, 1m, H/M/L) dB(A) 41/40/37 43/40/37 46/43/37 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 Refrigerant Control EEV EEV EEV Power cable mm2 CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Transmission cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Type Accessory Model
A
A
B
C
B
C
With Suction Grille & Suction Canvas
575
A
B3/B4
With Suction Grille & Suction Canvas
250
618
388
PBSC30 PBSC40
PBSGB30 PBSGB40
E 821 1100
D 56 56 F G 274 42~250 274 42~250
C 359 359
A 820 1100
B 910 1188
Btu/h 7k,9k,12k,15k 18,24k
With Suction Grille
6
1
4
5
Name
2
Air discharge Air suction
6
(unit : mm) Unit size(7k, 9k, 12k, 15k, 18k):ø6.35 Unit size(24k):ø9.52 Unit size(7k, 9k, 12k, 15k, 18k):ø12.7 Unit size(24k):ø15.88
Descripition
CHASSIS CODE: B3/B4
Drain pipe connection Power supply connection
Gas pipe connection
Liquid pipe connection
60
190
5
3 4
2
1
Number
3
65
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
Ceiling Concealed Duct (Built in)
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
500(Max)
277
With Suction Grille
388 190
216 24
6-4 190
Ceiling Concealed Duct- Built in
3. Dimensions
Ceiling Concealed Duct - Built in
4. Piping Diagrams
EEV Filter
Ceiling Concealed Duct- Built in
Heat Exchanger
:Cooling :Heating
Th2
Th3 Sirocco Fan
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
MODEL
GAS
LIQUID
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling Concealed Duct - Built in
6-5
5. Wiring Diagrams
Ceiling Concealed Duct- Built in
B3/B4 Chassis
CONNECTOR NUMBER CN-MOTOR1 CN-MOTOR2 CN-PIPE/OUT CN-PIPE/IN CN-ROOM CN-REMO CN-FLOAT CN-EEV CN-D/PUMP CN-OPTION CN-COM CN-D/PUMP CN-POWER CN-ZONE CN-DISPLAY CN-CC
SPEC.
DESCRIPTION
Fan motor output Fan motor output Discharge pipe sensor Suction pipe sensor Room sensor Remote controller Float switch input EEVv output Drain pump output Option PWB. Communication Drain pump output AC power supply Zone Controller RF Remote controller Dry contact
Motor output of BLDC Motor output of BLDC Pipe out thermistor Pipe in thermistor Room thermistor Remote control line Float switch sensing EEV control output AC output for drain pump Communication between main and option Communication between indoor and outdoor AC output for drain pump AC power line input for indoor controller Zone control line RF remote control line Dry contact line
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory → Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
6-6
Ceiling Concealed Duct - Built in
6. Capacity Tables 6.1 Cooling Capacity
Cooling capacity
23 16 TC SHC kW kW
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.7 1.7 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.2 2.1 2.0
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.0
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - Built in
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
6-7
Ceiling Concealed Duct- Built in
20 14 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
Ceiling Concealed Duct- Built in
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
4.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 2.9
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 2.9
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1
3.2 3.2 3.2 3.2 3.1 3.1 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.7 2.6 2.4
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2
3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.7 2.5
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.7
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.8 3.6
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.5
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.9 3.9 3.9 3.8 3.8 3.8 3.8 3.7 3.7 3.6 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.2 3.0
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.0
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.7
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.8 4.8 4.5
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.4
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
4.9 4.9 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 4.1 3.8
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.2 5.2 5.1 5.1 5.0 5.0 5.0 4.9 4.8 4.8 4.7 4.6 4.5 4.5 4.4 4.3 4.2 4.2 3.8
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
6-8
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling Concealed Duct - Built in
6.2 Heating Capacity Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
2.2
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Ceiling Concealed Duct- Built in
Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating capacity
Notes: TC: Total Capacity(kW)
Ceiling Concealed Duct - Built in
6-9
Ceiling Concealed Duct- Built in
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
4.5
5.6
7.1
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8 4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4 4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0 4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
6-10
Ceiling Concealed Duct - Built in
7. External Static Pressure (E.S.P) & Air Flow
Setting Value
(Unit: CMM)
Static Pressure(mmAq(Pa)) 0(0)
1(10)
2(20)
3(29)
4(39)
60
6.29
3.03
0.93
-
-
65
6.61
4.84
1.52
-
-
70
7.69
5.64
2.18
0.79
-
75
8.19
6.28
2.81
0.85
-
80
8.91
7.43
4.96
1.58
-
85
9.51
8.14
5.91
2.75
0.95
90
10.21
8.76
6.79
3.41
1.36
95
10.83
9.62
8.11
5.48
2.61
100
11.31
10.55
9.02
6.12
3.31
105
11.84
11.19
9.99
8.28
5.32
110
12.68
11.88
10.38
9.16
6.92
115
13.19
12.22
11.55
10.21
8.23
ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) Setting Value
(Unit: CMM)
Static Pressure(mmAq(Pa)) 0(0)
1(10)
2(20)
3(29)
4(39)
75
10.32
7.68
3.55
-
-
80
11.06
8.77
4.71
1.38
-
85
11.84
10.02
6.95
2.16
-
90
12.73
10.74
8.26
4.73
1.25
95
13.47
12.13
9.93
6.74
2.73
100
14.16
13.25
10.51
8.41
3.65
105
15.29
14.11
12.31
9.83
6.21
110
16.09
14.77
13.49
10.39
8.32
115
16.91
15.88
14.48
12.77
9.92
120
17.81
16.88
15.15
13.98
10.85
125
18.55
17.84
16.12
15.13
12.97
130
19.01
18.55
17.33
16.28
14.59
Note : 1. The above table shows the correlation between the air rates and E.S.P. 2. E.S.P. is given after subtracting coil losses motor step factory installed 3. E.S.P. can be higher than the maximum given in the table, but the unit faces the problem of freezing the coil.
Ceiling Concealed Duct - Built in
6-11
Ceiling Concealed Duct- Built in
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
Ceiling Concealed Duct- Built in
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) Capacity
7k
High (factory set) Standard
9k
Standard Set value ESP(mmAq(Pa))
Mode
High (factory set) Standard High (factory set)
12k Standard High (factory set) 15k Standard
HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low HI Mid Low
94 88 83 74 62 56 99 89 85 82 66 58 105 94 88 90 74 62 110 105 94 96 90 74
2(20) 0(0) 2(20) 0(0) 2(20) 0(0) 2(20) 0(0)
CMM 8 6.5 5.5 8 6.5 5.5 9 7 6 9 7 6 10 8 6.5 10 8 6.5 11 10 8 11 10 8
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
-
4(39)
ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) Capacity
18k
High (factory set) Standard
24k
High (factory set) Standard
6-12
Standard Set value ESP(mmAq(Pa))
Mode HI Mid Low HI Mid Low HI Mid Low HI Mid Low
115 103 93 100 86 74 128 118 93 116 104 74
2(20) 0(0) 2(20) 0(0)
CMM 14 12 10 14 12 10 17 15 10 17 15 10
Lower Limit of External Static Pressure(mmAq(Pa))
Upper Limit of External Static Pressure(mmAq(Pa))
-
4(39)
-
4(39)
-
4(39)
-
4(39)
Ceiling Concealed Duct - Built in
8. Electric Characteristics Units
Power Supply
Input(W)
kW
FLA
1.22
15
0.028
0.17
30
30
1.22
15
0.028
0.17
30
30
Max:264
1.22
15
0.028
0.17
30
30
Min:198
1.22
15
0.028
0.17
30
30
B4
1.55
15
0.076
0.44
80
80
ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
B4
1.55
15
0.076
0.44
80
80
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
1.22
15
0.028
0.17
30
30
ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
1.22
15
0.028
0.17
30
30
ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
Max:242
1.22
15
0.028
0.17
30
30
ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
Min:198
1.22
15
0.028
0.17
30
30
ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
B4
1.55
15
0.076
0.44
80
80
ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
B4
1.55
15
0.076
0.44
80
80
Type
ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y)
B3
ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
Hz
50
60
220~240
220
Cooling Heating
Symbols: MCA : Min, Circuit Amps(A) MFA : Max. Fuse Amps(Notes) kW : Fan Motor Rated Output(kW) FLA : Full Load Amps(A) IFA : Indoor Fan Motor Note : 1. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above listed range limits, 2. Maximum allowable voltage unbalance between phases is 2% 3. MCA/MFA MCA=1.25 x FLA + 1 MFA≤ 4 x FLA (Next lower standard fuse rating. Min. 15A) 4. Select wire size based on the MCA 5. Instead of fuse, use circuit breaker.
Ceiling Concealed Duct - Built in
6-13
Ceiling Concealed Duct- Built in
MFA
Model
Volts Voltage Range MCA
IFM
9. Sound Levels
Ceiling Concealed Duct- Built in
Overall Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operation condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1.5m
Ceiling 2.0m Microphone
Sound Levels dB(A) H M 37 34 39 35 40 37 41 40 43 40 46 43
Model Name ARNU07GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU09GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU12GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU15GB3G2+PBSGB30(Acc'y), PBSC30(Acc'y) ARNU18GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y) ARNU24GB4G2+PBSGB40(Acc'y), PBSC40(Acc'y)
L 33 34 34 37 37 37
Sound Pressure Level
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
63
80
70
70
NC-60
250
500
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-20
125
NC-65
60
20
NC-25 Approximate Hearing Threshold
80
NC-15 1000 2000 4000 8000
10
NC-25 Approximate Hearing Threshold 63
Octave Band Center Frequency (Hz)
70
70
NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
125
250
500
250
500
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
NC-15 1000 2000 4000 8000
NC-20
125
250
NC-15 1000 2000 4000 8000
500
Octave Band Center Frequency (Hz)
ARNU24GB4G2+ PBSGB40(Acc'y), PBSC40(Acc'y) 80
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-65 60 NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-25
NC-25
20
NC-20
Octave Band Center Frequency (Hz)
6-14
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
80
40
125
NC-55
50
ARNU18GB4G2+ PBSGB40(Acc'y), PBSC40(Acc'y)
80
50
NC-60
NC-20 NC-15 1000 2000 4000 8000
NC-65
60
Octave Band Center Frequency (Hz)
ARNU15GB3G2+ PBSGB30(Acc'y), PBSC30(Acc'y)
60
Octave Band Sound Pressure Level (dB re 20µPa )
NC-65
60
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
70
ARNU12GB3G2+ PBSGB30(Acc'y), PBSC30(Acc'y)
Octave Band Sound Pressure Level (dB re 20µPa )
80
ARNU09GB3G2+ PBSGB30(Acc'y), PBSC30(Acc'y)
ARNU07GB3G2+ PBSGB30(Acc'y), PBSC30(Acc'y)
10
Approximate Hearing Threshold 63
Approximate Hearing Threshold
NC-20
125
250
500
1000
2000
4000
Octave Band Center Frequency (Hz)
NC-15 8000
NC-20 NC-15
10 63
125
250
500
1000 2000
4000
8000
Octave Band Center Frequency (Hz)
Ceiling Concealed Duct - Built in
10. Installation
Suction Grille TEMP
Remote Controller
Suction Grille + Suction Canvas
TEMP
Remote Controller
Required Parts
Required Tools
• Connecting cable • Pipes: Gas side Liquid side • Hanging Bolt (W 3/8 or M10 length 650mm) • Insulated drain hose • Additional Drain hose (Inner Dia ....................................25mm)
• Level • Screw driver • Electric drill • Hole core drill (ø70mm) • Flaring Tools set • Torque Wrenches • Hexagonal Wrench (4mm, 5mm) • Gas-leak detector • Owner’s Manual • Thermometer
Ceiling Concealed Duct - Built in
6-15
Ceiling Concealed Duct- Built in
• Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Install the air conditioner in the location that satisfies the following conditions.
Top view (unit:mm) Airflow
• The place shall easily bear a load exceeding four times the indoor unit’s weight.
Inspection hole (600 x 600)
• The place shall be able to inspect the unit as the figure.
Control box
• The place where the unit shall be leveled. • The place shall easily connect with the outdoor unit. 600
• The place where the unit is not affected by an electrical noise.
600
• There should not be any heat source or steam near the unit Confirm the positional relationship between the unit and suspension bolts.
270 or more
• The place where air circulation in the room will be good .
• Installation the ceiling opening to clean the filter or service under the product.
(unit : mm) Chassis
A
B
B3
600
900
B4
600
1100
520 or more
Ceiling Concealed Duct- Built in
10.1 Selection of the best location
• Refer to Suction grille and Suction canvas installation manual for detail installation of Built-in duct type
A(Min)
B3/B4 Series : Built-in Duct type
B(Min)
Ceiling Service Space
A
B
6-16
Ceiling Concealed Duct - Built in
10.2 Ceiling dimension and hanging bolt location Ceiling Concealed Duct- Built in
Installation of Unit B A J
Install the unit above the ceiling correctly.
CASE 1
C D
POSITION OF SUSPENSION BOLT
E
• Apply a joint-canvas between the unit and duct to absorb unnecessary vibration. G
• Apply a filter Accessory at air return hole. (Unit:mm)
I F
Dimension
A
D
E
F
850 900 383 575 1130 1180 383 575
93 93
190 190
Chassis
B3 B4
B
C
G
H
I
J
H 21 795 163 820 21 1065 163 1100
Drainage hole
Drain Pump use
M10 Nut
X4
M10 washer
X4
M10 washer
X4
M10 Nut
X8
CASE 2 • Install the unit leaning to a drainage hole side as a figure for easy water drainage.
POSITION OF CONSOLE BOLT • A place where the unit will be leveled and that can support the weight of the unit. • A place where the unit can withstand its vibration. • A place where service can be easily performed.
Ceiling Concealed Duct - Built in
6-17
• Insert the set anchor and washer onto the suspension bolts for locking the suspension bolts on the ceiling. • Mount the suspension bolts to the set anchor firmly. • Secure the installation plates onto the suspension bolts (adjust level roughly) using nuts, washers and spring washers.
Ceiling Concealed Duct- Built in
• Select and mark the position for fixing bolts. • Drill the hole for set anchor on the face of ceiling.
Old building
New building
1 Set anchor 2 Plate washer 3 Spring washer 4 Nut
CAUTION
5 Suspension bolts
Tighten the nut and bolt to prevent unit falling.
10.3 Connecting Cables Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING Make sure that the screws of the terminal are not from loose.
Clamping of cables 1) Arrange 2 power cables on the control panel. 2) First, fasten the steel clamp with a screw to the inner boss of control panel. 3) For the cooling model, fix the other side of the clamp with a screw strongly. For the heat pump model, put the 0.75mm2 cable(thinner cable) on the clamp and tighten it with a plastic clamp to the other boss of the control panel.
6-18
Ceiling Concealed Duct - Built in
10.4 Part name and functions Ceiling Concealed Duct- Built in
Air outlet
Air outlet
Suction Grille Suction Grille Suction Canvas
• Buit-in duct type with Suction Grille
• Buit-in duct type with Suction Grille and Suction Canvas
■ B3/B4 Series : Built-in Duct type Control Box service
Ceiling Concealed Duct - Built in
6-19
Ceiling Concealed Duct- Built in
INSULATION, OTHERS THERMAL INSULATION
Insulate the joint and tubes completely.
All thermal insulation must comply with local requirement.
INDOOR UNIT Union for gas pipe
Refrigerant pipe and thermal insulator(Local supply)
Thermal insulator for refrigerant pipe (Local supply) Thermal insulator for piping(Local supply)
Hose clip for thermal insulator (Local supply) Overlap with thermal insulator for piping. Hose clip for thermal insulator(Local supply) Make sure that there is no clearance here.
Thermal insulator for refrigerant pipe (Local supply) Union for liquid pipe
Felt
Cabinet
Rubber
Insulation No clearance
TEST AND CHECK
■ After all workings are finished, check the working and operation. • Air distribution ............... Is the air circulation good? • Drain ............................. Is the drainage smoothly and no sweating? • Gas leakage ................. Is the piping connection correctly? • Wiring ........................... Is the wiring connection correctly? • Lock-bolt ....................... Is the lock-bolt of compressor loosened? • Insulation Is the unit fully insulated? • Ground Is the unit safely grounded?
10.5 Checking the Drainage 1. Remove the Air Filter.
6-20
2. Check the drainage. • Spray one or two glasses of water upon the evaporator. • Ensure that water flows drain hose of indoor unit without any leakage.
Ceiling Concealed Duct - Built in
CAUTION Ceiling Concealed Duct- Built in
1. Install declination of the indoor unit is very important for the drain of the duct type air conditioner. 2. Minimum thickness of the insulation for the connecting pipe shall be 19mm.
Front of view • The unit must be horizontal or declined to the drain hose connected when finished installation.
Ceiling Drainage hole
Drain Pump use
10.6 Drain Piping • Drain piping must have down-slope (1/50 to 1/100): be sure not to provide up-and-down slope to prevent reversal flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection on the indoor unit is 32mm.
Pipe clamp Indoor unit
Piping material: Polyvinyl chloride pipe VP-25 and pipe fittings
Upward routing not allowed
Maintenance drain port
• Be sure to install heat insulation on the drain piping. Heat insulation material: Polyethylene foam with thickness more than 8 mm.
1/50~1/100 MAX 700mm
Drain test The air conditioner uses a drain pump to drain water. Use the following procedure to test the drain pump operation:
Feed water
Flexible drain hose Main drain pipe
Drain Pump
Drain port
Glue the joint
Drain hose connection Use the clip
• Connect the main drain pipe to the exterior and leave it provisionally until the test comes to an end. • Feed water to the flexible drain hose and check the piping for leakage. • Be sure to check the drain pump for normal operating and noise when electrical wiring is complete. • When the test is complete, connect the flexible drain hose to the drain port on the indoor unit.
Drain pan
Ceiling Concealed Duct - Built in
6-21
Max 300mm
Hanger distance 1~15m
Hanger Bracket 1/50~1/100 slope
Metal clamp Flexible drain hose
Max 700mm
Ceiling Concealed Duct- Built in
CAUTION : The supplied flexible drain hose should not be curved, neither screwed. The curved or screwed hose may cause a leakage of water.
Insulation
CAUTION: After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have an individual power specialized for the air conditioner. As for the method of wiring, be guided by the circuit diagram posted on the inside of control box cover. 2) Provide a circuit breaker switch between power source and the unit. 3) The screws which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could give rise to burn-out of the wires.) Flexible drain hose 4) Specification of power source 5) Confirm that electrical capacity is sufficient. 6) Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 7) Confirm that the cable thickness is as specified in the power sources specification. (Particularly note the relation between cable length and thickness.) 8) Never fail to equip a leakage breaker where it is wet or moist. 9) The following troubles would be caused by voltage drop-down. • Vibration of a magnetic switch, damage on the contact point, fuse breaking, disturbance by the normal function of an overload protection device. • Proper starting power is not given to the compressor.
HAND OVER Teach the customer the operation and maintenance procedures, using the operation manual. (air filter cleaning, temperature control, etc.)
6-22
Ceiling Concealed Duct - Built in
WIRED REMOTE CONTROLLER INSTALLATION
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Ceiling Concealed Duct - Built in
6-23
Ceiling Concealed Duct- Built in
• Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
11. Accessories
Ceiling Concealed Duct- Built in
Standard Accessories Name
Drain hose
Clamp metal
Quantity
1 EA
2 EA
Washer for hanging backet 8 EA
Clamp (Tie Wrap)
Insulation for fitting
4 EA
1 SET
(Other)
• Owner's manual • Installation manual Shape
for gas pipe
for liquid pipe
CAUTION • Use only those accessories (Standard or optional) which have designated specilications.
6-24
Ceiling Concealed Duct - Built in
7
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Wall Mounted
Wall Mounted
Wall Mounted
1. List of Functions
Wall Mounted
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GSE*2, ARNU09GSE*2, ARNU12GSE*2 ARNU15GSE*2, ARNU18GS5*2, ARNU24GS5*2 1 SE Manual / S5 Auto Auto SE Manual / S5 Auto X 3/4/3 O O O X Option O O O O O(Heat recovery) O O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory Accessory Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
7-1
Wall Mounted
2. Specifications * Model Name A:Basic L:Plasma Type Model Cooling Capacity
Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Color
Ø, V, Hz mm2 mm2
Wall Mounted ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 2.2 2.8 3.6 1,900 2,400 3,100 7,500 9,600 12,300 2.5 3.2 4.0 2,200 2,800 3,400 8,500 10,900 13,600 895x165x282 895x165x282 895x165x282 35.2x6.5x11.1 35.2x6.5x11.1 35.2x6.5x11.1 2x15x18 2x15x18 2x15x18 0.21 0.21 0.21 Cross Flow Fan Cross Flow Fan Cross Flow Fan 20 20 20 0.20 0.20 0.20 5.6/5/4.6 7/ 6.5 /6 9.5/ 9/8.5 198/177/162.5 247/230/212 336/318/300 Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Resin Net(washable) Resin Net(washable) Resin Net(washable) Fuse Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) 16 16 16 9(19.8) 9(19.8) 9(19.8) 37/33/23 39/35/25 41/36/27 1, 220 ~ 240, 50 1, 220 ~240, 50 1, 220 ~240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog Morning fog
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Wall Mounted
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
7-2
Wall Mounted
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h mm inch
Wall Mounted
* Model Name A:Basic L:Plasma Type Model Cooling Capacity
Heating Capacity Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
Unit kW kcal/h Btu/h kW kcal/h Btu/h mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Color
Ø, V, Hz mm2 mm2
Wall Mounted ARNU15GSE*2 ARNU18GS5*2 ARNU24GS5*2 4.5 5.6 7.1 3,900 4,800 6,100 15,400 19,100 24,200 5.0 6.3 8.0 4,300 5,400 6,900 17,100 21,500 27,300 895x165x282 1,090x178x300 1,090x178x300 35.2x6.5x11.1 42.9x7x11.8 42.9x7x11.8 2x15x18 2x15x20 2x15x20 0.21 0.26 0.26 Cross Flow Fan Cross Flow Fan Cross Flow Fan 20 20 20 0.20 0.20 0.20 10.5/9/8.5 12/10.5/9 14/13/10 371/318/300 424/371/318 494/459/353 Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Resin Net(washable) Resin Net(washable) Resin Net(washable) Fuse Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø9.52(3/8) Ø12.7(1/2) Ø12.7(1/2) Ø15.88(5/8) 16 16 16 9(19.8) 12(26.5) 12(26.5) 42/36/27 44/40/36 46/41/38 1, 220 ~240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog Morning fog
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
7-3
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Wall Mounted
567
895
2
1
Air discharge grill Air suction grill
1 2
282
H
Descripition
(unit : mm)
165
D
(unit : mm)
282
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: SE
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
895
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2
Number
W
Wall Mounted
Wall Mounted Model
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2
Wall Mounted
3. Dimensions
7-4
265
165
7-5
Wall Mounted
804
1,090
2
1
281
300
Air discharge grill Air suction grill
1 2
300
H
Descripition
(unit : mm)
178
D
(unit : mm)
CHASSIS CODE: S5
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
1090
ARNU18GS5*2 ARNU24GS5*2
Number
W
Model
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
178
ARNU18GS5*2 ARNU24GS5*2
Wall Mounted
Wall Mounted
4. Piping Diagrams
Heat Exchanger
EEV Filter
Th3
:Cooling :Heating
Th2
C.F.F
Wall Mounted
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Wall Mounted
MODEL
GAS
LIQUID
ARNU07GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GS5*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GS5*2
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
7-6
5. Wiring Diagrams
Wall Mounted
SE Chassis
S5 Chassis
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-COM CN-DISP1 CN-DISP2 CN-EEV CN-U/D CN-TH1 CN-REMO CN-CC CN-HVB
7-7
LOCATION POINT AC Power supply Fan motor output Communication Display Display EEV output Step motor Room/pipe sensor Remote controller Dry contact Air clean
FUNCTION AC Power line input for indoor controller Motor output of BLDC Connection between indoor and outdoor Display of indoor status Display of indoor status EEV control output Step motor output Room and pipe thermistor Remote control line Dry contact line Air clean control
Wall Mounted
6. Capacity Tables 6.1 Cooling Capacity
Cooling Capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
Outdoor air temp. (DB, 째C)
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.8
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.7
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.6 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.2
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.4 2.3 2.3 2.3 2.3 2.2 2.2 2.1 2.1 2.1 1.9
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.1 2.1 1.9
Wall Mounted
SHC: Sensible Heat Capacity(kW)
7-8
Wall Mounted
Notes: TC: Total Capacity(kW)
32 24 TC SHC kW kW
Wall Mounted
Cooling Capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
4.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.0
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.1 2.9
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 2.8
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1
3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.7 2.7 2.6 2.4
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2
3.4 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.7 2.7 2.4
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.7
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.6
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.8 3.8 3.5
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.9 3.9 3.9 3.9 3.9 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.6 3.5 3.4 3.4 3.3 3.2 3.0
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.0
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.8
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.0 4.9 4.8 4.6
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.5
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
5.0 5.0 5.0 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 3.8
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.6 4.5 4.5 4.4 4.3 4.2 3.8
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
7-9
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Wall Mounted
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating Capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
2.2
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Wall Mounted
kW -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
Notes: TC: Total Capacity(kW)
Wall Mounted
7-10
Wall Mounted
Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
4.5
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4
5.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
7.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
7-11
Wall Mounted
7. Air Velocity and Temperature Distribution(Reference Data) ARNU07GSE*2 Cooling
Heating Discharge angle:50°
Discharge angle:45° Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m
2m
2m 0.5
1.5
1.0
1m
Wall Mounted
2.0 1.5
1m
1.0 0.5
5m
4m
3m
2m
0m 0m
1m
Temperature [°C]
5m
4m
3m
2m
0m 0m
1m
Temperature [°C] 2.7m
2.7m
2m
2m 21
24
18 20
33 30
1m
1m
27 22
24
5m
4m
3m
2m
0m 0m
1m
5m
4m
3m
2m
0m 0m
1m
ARNU09GSE*2 Cooling
Heating Discharge angle:50°
Discharge angle:45°
Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m
2m
2m 2.0 1.5
1.5
1m
1m
1.0 0.5
1.0 0.5
5m
4m
3m
2m
0m 0m
1m
Temperature [°C]
5m
4m
3m
2m
0m 0m
1m
Temperature [°C] 2.7m
2.7m
2m
2m 33
18 21 20
24
30
1m
1m
27 22
24
5m
4m
Wall Mounted
3m
2m
1m
0m 0m
5m
4m
3m
2m
1m
0m 0m
7-12
ARNU12GSE*2 Cooling
Heating Discharge angle:50°
Wall Mounted
Discharge angle:45°
Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m
2m
2m
2.0
2.0
1m
1m
1.5 0.5
5m
4m
3m
2m
1.0
1.0
0.5
0m 0m
1m
5m
Temperature [°C]
4m
1.5
3m
2m
0m 0m
1m
Temperature [°C] 2.7m
2.7m
2m
2m 33
18
21 30
1m
20
1m
27 24
5m
4m
24
22
3m
2m
0m 0m
1m
5m
4m
3m
2m
0m 0m
1m
ARNU18GS5*2 Cooling
Heating Discharge angle:50°
Discharge angle:45°
Air velocity [m/s]
Air velocity [m/s]
2.5 0.5
8m
7m
6m
5m
4m
3m
2.7m
2.7m
2m
2m
1m
1.5
1.0
2m
0.5
0m 0m
1m
Temperature [°C]
1m
2.0 1.0
8m
7m
6m
5m
4m
3m
2m
1.5
0m 0m
1m
Temperature [°C] 2.7m
2.7m
2m
2m 33
18 20
7m
7-13
6m
5m
4m
30
21
3m
2m
1m
0m 0m
8m
7m
6m
5m
4m
3m
1m
27
24
22
24
8m
1m
2m
1m
0m 0m
Wall Mounted
8. Electric Characteristics Units
Power Supply
Input(W)
kW
FLA
1.29
15
0.02
0.23
40
40
1.29
15
0.02
0.23
40
40
Max:264
1.29
15
0.02
0.23
40
40
Min:198
1.29
15
0.02
0.23
40
40
S5
1.29
15
0.02
0.23
40
40
ARNU24GS5*2
S5
1.29
15
0.02
0.23
40
40
ARNU07GSE*2
SE
1.29
15
0.02
0.23
40
40
ARNU09GSE*2
SE
1.29
15
0.02
0.23
40
40
ARNU12GSE*2
SE
Max:242
1.29
15
0.02
0.23
40
40
ARNU15GSE*2
SE
Min:198
1.29
15
0.02
0.23
40
40
ARNU18GS5*2
S5
1.29
15
0.02
0.23
40
40
ARNU24GS5*2
S5
1.29
15
0.02
0.23
40
40
Type
ARNU07GSE*2
SE
ARNU09GSE*2
SE
ARNU12GSE*2
SE
ARNU15GSE*2
SE
ARNU18GS5*2
Hz
50
60
Volts
220 ~ 240
220
Cooling Heating
Symbols: MCA :Min, Circuit Amps(A) MFA:Max. Fuse Amps(Notes) kW:Fan Motor Rated Output(kW) FLA:Full Load Amps(A) IFM:Indoor Fan Motor Note : 1. Voltage range Units are suitable for use on electrical systems where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phases is 2% 3. MCA/MFA MCA=1.25 x FLA + 1 MFA≤ 4 x FLA (Next lower standard fuse rating. Min. 15A) 4. Select wire size based on the MCA 5. Instead of fuse, use Circuit Breaker.
Wall Mounted
7-14
Wall Mounted
MFA
Model
Voltage Range MCA
IFM
9. Sound Levels
Wall Mounted
Overall Notes: - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1m 1m Microphone Sound Levels dB(A) H M 37 33 39 35 41 36 42 36 44 40 46 41
Model ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2 ARNU18GS5*2 ARNU24GS5*2
L 23 25 27 27 36 38
Sound Pressure Level
70
70
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
10
NC-25 Approximate Hearing Threshold 63
NC-60
250
500
1000
2000
4000
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20
125
NC-65
60
NC-15 8000
10
NC-25 Approximate Hearing Threshold 63
Octave Band Center Frequency (Hz)
Octave Band Sound Pressure Level (dB re 20µPa )
80
20
125 250 500 1000 2000 4000 Octave Band Center Frequency (Hz)
NC-15 8000
NC-60
NC-50
NC-40
NC-30
10
ARNU18GS5*2
NC-55 NC-50 NC-45 NC-40 NC-35 NC-30
10
NC-25
63
7-15
NC-65 60 NC-60 50
NC-50
125 250 500 1000 2000 4000 Octave Band Center Frequency (Hz)
NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-20 NC-15 8000
NC-55
10 63
125 250 500 1000 2000 4000 Octave Band Center Frequency (Hz)
Octave Band Sound Pressure Level (dB re 20µPa )
NC-60
Octave Band Sound Pressure Level (dB re 20µPa )
NC-65
NC-20
125 250 500 1000 2000 4000 Octave Band Center Frequency (Hz)
NC-15 8000
ARNU24GS5*2 70
Approximate Hearing Threshold
Approximate Hearing Threshold 63
70
20
NC-25
20
70
30
NC-35
30
80
40
NC-45
40
80
50
NC-55
50
80
60
NC-65
60
NC-20
ARNU15GSE*2
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU12GSE*2
ARNU09GSE*2 80
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU07GSE*2 80
NC-65 60 NC-60
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20 Approximate Hearing Threshold
NC-20 NC-15 8000
NC-55
50
NC-20 NC-15
10 63
125 250 500 1000 2000 4000 Octave Band Center Frequency (Hz)
8000
Wall Mounted
10. Installation • Please read the instruction sheetss completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided Wall Mounted
1. Type "A" screw 2. Installation Plate
Required Parts
Required Tools
❏ Installation plate ❏ Four type "A" screws ❏ Connecting cable
❏ Level gauge ❏ Screw driver ❏ Electric drill ❏ Hole core drill
❏ Pipes: Gas side Liquid side ❏ Insulation materials ❏ Additional drain pipe
❏ Flaring tool set ❏ Specified torque wrenches ❏ Spanner......................................................Half union ❏ A glass of water ❏ Screw driver ❏ Thermometer
Wall Mounted
7-16
10.1 Selection of the best location
Front
Wall Mounted
• There should not be any heat source or steam near
the unit. • There should not be any obstacles to prevent air circulation. • A place where air circulation in the room will be good. • A place where drainage can be easily obtained. • A place where noise prevention is taken into consideration. • Do not install the unit near the door way. • Ensure the spaces indicated by arrows from the wall, ceiling, fence, or other obstacles.
Left Rear left Down right Right
Rear right
More than 100mm
More than 200mm
More than 100mm More than 2300mm
The mounting wall should be strong and solid enough to protect it from vibration. 1. Mount the installation plate on the wall with four Type "A" screws. (If mounting the unit on the concrete wall, consider using anchor bolts.) • Always mount the Installation plate horizontally by aligning the marking-off line by means of thread and a level.
S5 chassis Installation Plate Chassis Hook
Type “A”
SE chassis Installation Plate
Chassis Hook
Type “A”
7-17
Wall Mounted
Preparing work for installation ■ Preparing the indoor unit's piping and drain hose for installation through the wall. ■ Remove the plastic tubing retainer(see illustration below) and pull the tubing and drain hose away from chassis. ■ Replace the plastic tubing holder in the original position.
3. Tape the tubing, drain hose and the connecting cable. Be sure that the drain hose is located at the lowest side of the bundle. Locating at the upper side can cause drain pan to overflow inside the unit.
Wall Mounted
Loop
Tubing holder
Connecting cable Drain hose
To remove the holder, press the bottom of chassis near the holder upward and pull the tab out of its hole.
2 Pull 1 Press
CAUTION While installing, make sure that the remaining parts must be removed clearly so as not to damage the piping and drain hose, especially power cord and connecting cable.
For left rear piping
Gas side piping Liquid side piping
NOTE: If the drain hose is routed inside the room, insulate the hose with an insulation material* so that dripping from "sweating"(condensation) will not damage furniture or floors. *Foamed polyethylene or equivalent is recommended. 4. Indoor unit installation ■ Hook the indoor unit onto the upper portion of the installation plate.(Engage the two hooks of the rear top of the indoor unit with the upper edge of the installation plate.) Ensure that the hooks are properly seated on the installation plate by moving it left and right.
1. Route the indoor tubing and the drain hose in the direction of rear left.
Connecting cable
Drain hose
Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound). Drain hose
2. Insert the connecting cable into the indoor unit from the outdoor unit through the piping hole. ■ Do not connect the cable to the indoor unit. ■ Make a small loop with the cable for easy connection later.
5. Connecting the pipings to the indoor unit and drain hose to drain pipe. ■ Align the center of the pipings and sufficiently tighten the flare nut by hand.
Indoor unit tubing
Wall Mounted
Flare nut
Pipings
7-18
■ Tighten the flare nut with a wrench.
Wall Mounted
Spanner (fixed) Flare nut Connection pipe
Torque wrench
■ Wrap the area which accommodates the rear piping housing section with vinyl tape. Indoor unit pipe Wrap with vinyl tape
Connection pipe Vinyl tape (wide)
Connecting cable
Indoor unit tubing
Pipe
■ When extending the drain hose at the indoor unit, install the drain pipe.
Drain pipe
Vinyl tape(narrow)
■ Bundle the piping and drain hose together by wrapping them with vinyl tape over the range within which they fit into the rear piping housing section. Wrap with vinyl tape
Indoor unit drain hose Vinyl tape(narrow)
Pipe
Adhesive
Vinyl tape(wide) Drain hose
6. Wrap the insulation material around the connecting portion. ■ Overlap the connection pipe insulation material and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there is no gap.
Plastic bands
For right rear piping 1. Route the indoor tubing and the drain hose to the required piping hole position.
Insulation material
2. Insert the piping, drain hose and the connecting cable into the piping hole. Connecting cable
Drain pipe
7-19
Wall Mounted
3. Insert the connecting cable into the indoor unit. ■ Don't connect the cable to the indoor unit. ■ Make a small loop with the cable for easy connection later.
■ When extending the drain hose at the indoor unit, install the drain pipe.
Drain hose
4. Tape the drain hose and the connecting cable. • Connecting cable Indoor unit drain hose
7. Wrap the insulation material around the connecting portion. ■ Overlap the connecting pipe heat insulation and the indoor unit pipe heat insulation material. Bind them together with vinyl tape so that there is no gap. 5. Indoor unit installation ■ Hang the indoor unit from the hooks at the top of the installation plate. ■ Insert the spacer etc. between the indoor unit and the installation plate and separate the bottom of the indoor unit from the wall.
Plastic bands
Insulation material
■ Wrap the area which accommodates the rear piping housing section with vinyl tape.
Indoor unit Spacer
Connection pipe
Installation plate
Vinyl tape (wide)
8cm
6. Connecting the pipings to the indoor unit and the drain hose to drain pipe. ■ Align the center of the pipings and sufficiently tighten the flare nut by hand.
Indoor unit tubing
Flare nut
Indoor unit piping Wrap with vinyl tape Pipe
Connecting cable
Vinyl tape (narrow)
Pipings
■ Tighten the flare nut with a wrench. Spanner (fixed)
Torque wrench
Flare nut Connection pipe
Indoor unit tubing
Wall Mounted
7-20
Wall Mounted
Vinyl tape(narrow) Adhesive
Wall Mounted
■ Bundle the piping and drain hose together by wrapping them with cloth tape over the range within which they fit into the rear piping housing section.
10. Indoor unit installation ■ Remove the spacer. ■ Ensure that the hooks are properly seated on the installation plate by moving it left and right.
Pipe Drain hose
Vinyl tape (narrow)
Connecting cable
Wrap with vinyl tape(wide)
8. Reroute the pipings and the drain hose across the back of the chassis.
Drain hose
Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound).
Piping for passage through piping hole
9. Set the pipings and the drain hose to the back of the chassis with the tubing holder. ■ Hook the edge of tubing holder to tap on chassis and push the bottom of tubing holder to be engaged at the bottom of chassis.
Tubing holder 1 Hook
2 Push
7-21
Wall Mounted
10.2 Connection of Pipings 2. To check the drainage. ■ Pour a glass of water on the evaporator. ■ Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit. Wall Mounted
1. To remove the front panel from the indoor unit, remove the front panel from the indoor unit cabinet. ■ Set the air direction louvers up-and-down to the position(horizontally) by hand. ■ Remove the securing screws that retain the front panel. Pull the lower left and right sides of the grille toward you and lift it off. (2.1/7, 2.6/9, 3.5/12 kW/Btu models: 2EA, 3.5/18 kW/Btu models: 3EA)
Pull the right and the left side.
Screw
10.3 Connect the cable to the indoor unit 1. Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Remote control co cord
Connecting cable
Wall Mounted
7-22
Terminal Block Indoor
Wall Mounted
1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
2. Attach the Grille onto the cabinet. • Grasp lower the left and right side of the Grille and engage four tabs on the top inside edge of the chassis. • Press the Grille toward the chassis until it is back in place.
CAUTION After the confirmation of the above conditions, prepare the wiring as follows: 1) As for the method of wiring, follow the circuit diagram posted on the inside of control cover. 2) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could cause burn-out of the wires.) 3) Confirm the specification of power source. 4) Confirm that electrical capacity is sufficient. 5) See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 6) Confirm that the cable thickness is as specified in the power source specification. (Particularly note the relation between the cable length and thickness.) 7) In a wet or moist area, always install an earth leakage circuit breaker. 8) The following would be caused by voltage drop. • Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the normal function of the overload. 9) The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductor.
7-23
Wall Mounted
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
TEMP
Wall Mounted
- Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Wall Mounted
7-24
11. Accessories
Wall Mounted
Standard Accessories Name
Installation panel
Type "A" screw
Quantity
1 set
SE: 6 EA S5: 8 EA
(Other) • Owner's manual • Installation manual
SE
Shape S5
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
7-25
Wall Mounted
8
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
ART COOL Mirror
ART COOL Mirror
ART COOL Mirror
ART COOL Mirror
1. List of Functions Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GSE*2, ARNU09GSE*2, ARNU12GSE*2 ARNU15GSE*2, ARNU18GS8*2, ARNU24GS8*2 1 Auto Auto Auto X 3/4/3 O O O X Option O O O O O(Heat recovery) O O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
8-1
ART COOL Mirror
2. Specifications
Unit kW kcal/h Btu/h kW kcal/h Btu/h mm inch
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
ART COOL Mirror
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
8-2
ART COOL Mirror
ART COOL Mirror ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 2.2 2.8 3.6 1,900 2,400 3,100 Cooling Capacity 7,500 9,600 12,300 2.5 3.2 4.0 2,200 2,800 3,400 Heating Capacity 8,500 10,900 13,600 915x169x282 915x169x282 915x169x282 Dimensions(WxDxH) Body 36.0x6.5x11.1 36.0x6.5x11.1 36.0x6.5x11.1 2x15x18 2x15x18 2x15x18 Rows x Columns x FPI Coil 0.21 0.21 0.21 Face Area m2 Cross Flow Fan Cross Flow Fan Cross Flow Fan Type 20 20 20 Motor Output x Number W 0.20 0.20 0.20 Running Current A 7/6/4 8/7/5 10/8/6 Fan Air Flow Rate(H/M/L) CMM 247/212/141 282/247/177 353/283/212 cfm Direct Direct Direct Drive BLDC BLDC BLDC Motor type Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Temperature Control Foamed polystrene Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Resin Net(washable) Resin Net(washable) Resin Net(washable) Air Filter Fuse Fuse Fuse Safety Device Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Liquid Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) Pipe Connections Gas Side mm(inch) 16 16 16 Drain Pipe(Internal Dia.) mm 11.2(24.7) 11.2(24.7) 11.2(24.7) Net Weight kg(lbs) 37/33/23 39/35/25 41/36/27 Noise Level(Sound Press, 1m, H/M/L) dB(A) 1, 220 ~ 240, 50 1, 220 ~240, 50 1, 220 ~240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2 R:Mirror V:Silver B:Blue Front Panel('*' Position) Type Model
ART COOL Mirror
ART COOL Mirror ARNU15GSE*2 ARNU18GS8*2 4.5 5.6 3,900 4,800 Cooling Capacity 15,400 19,100 5.0 6.3 4,300 5,400 Heating Capacity 17,100 21,500 915x169x282 1,107x200x299 Dimensions(WxDxH) Body 36.0x6.5x11.1 43.9x7.9x11.8 2x15x18 2x15x20 Rows x Columns x FPI Coil 0.21 0.26 Face Area m2 Cross Flow Fan Cross Flow Fan Type 20 20 Motor Output x Number W 0.20 0.20 Running Current A 10.5/8/6 14.4/13/11 Fan Air Flow Rate(H/M/L) CMM 371/283/212 508/459/388 cfm Direct Direct Drive BLDC BLDC Motor type Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Temperature Control Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Resin Net(washable) Resin Net(washable) Air Filter Fuse Fuse Safety Device Ø6.35(1/4) Ø6.35(1/4) Liquid Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Pipe Connections Gas Side mm(inch) 16 16 Drain Pipe(Internal Dia.) mm 11.2(24.7) 15(33.1) Net Weight kg(lbs) 42/36/27 37/34/31 Noise Level(Sound Press, 1m, H/M/L) dB(A) 1, 220 ~240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2 R:Mirror V:Silver B:Blue Front Panel('*' Position) Type Model
Unit kW kcal/h Btu/h kW kcal/h Btu/h mm inch
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
8-3
ARNU24GS8*2 7.1 6,100 24,200 8.0 6,900 27,300 1,107x200x299 43.9x7.9x11.8 2x15x20 0.26 Cross Flow Fan 20 0.20 17.9/14.4/12 632/508/424 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø9.52(3/8) Ø15.88(5/8) 16 15(33.1) 43/37/32 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
ART COOL Mirror
567
915
W
165
282
169
1
51
2
282
D
Note
282
H
Descripition
(unit : mm)
169
D
(unit : mm)
CHASSIS CODE: SE
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Air suction grill
Air discharge grill
1 2
Name
915
W
Number
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2
Model
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2
ART COOL Mirror
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
53
ART COOL Mirror ART COOL Mirror
H
3. Dimensions
8-4
265
804
1107
1
72 58 122
2
281
93
3
200
53
4
10 63
8-5
ART COOL Mirror
48
299
Knockout hole
4
Note
Remark
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: S8
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Installation plate
Air suction grille
3
5
Display & signal receiver
2
Part Name Front panel
1
No.
ARNU18GS8*2 ARNU24GS8*2
ART COOL Mirror
ART COOL Mirror
4. Piping Diagrams
Heat Exchanger
:Cooling :Heating
EEV Filter Th2
Th3
C.F.F
ART COOL Mirror
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [Unit: mm(inch)]
MODEL
GAS
LIQUID
ARNU07GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU15GSE*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GS8*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GS8*2
Ø15.88(5/8)
Ø9.52(3/8)
*Panel Color (SE/S8 chassis) : R(Mirror),V(Silver), B(Blue) LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
ART COOL Mirror
PCB Connector CN-TH1 CN-TH2
8-6
5. Wiring Diagrams ART COOL Mirror
SE/S8 Chassis
CONNECTOR NUMBER
LOCATION POINT
FUNCTION
CN-MOTOR1
Fan motor output
Motor output of BLDC
CN-COM
Communication
Communication between indoor and outdoor
CN-EEV
EEV output
EEV control output
CN-L/R
Step motor
Step motor output for left/right
CN-U/D
Step motor
Step motor output
CN-TH1
Room/pipe sensor
Room & pipe thermistor
CN-TH2
Discharge pipe sensor
Discharge pipe thermistor
CN-SUC
Step motor(front)
Front panel step motor
CN-HVB
Air purifier
Air purifier output
CN-VFD
Display
Display of indoor status
CN-12V
Safety connection
Safety of indoor status
CN-REMO
Remote controller
Remote control line
CN-CC
Dry contact
Dry contact line
CN-HVB
Air clean
Air clean control
8-7
ART COOL Mirror
6. Capacity Tables 6.1 Cooling Capacity
Cooling Capacity
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.1 1.9
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.1 1.9
Notes: TC: Total Capacity(kW)
ART COOL Mirror
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
8-8
ART COOL Mirror
20 14 TC SHC kW kW
Outdoor air temp. (DB, 째C)
ART COOL Mirror
Cooling Capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
Outdoor air temp. (DB, 째C)
4.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.0
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0
3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.1 2.9
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 2.8
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1
3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.7 2.7 2.6 2.4
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2
3.4 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.7 2.7 2.4
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.7
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.6
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.8 3.8 3.5
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.9 3.9 3.9 3.9 3.9 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.6 3.5 3.4 3.4 3.3 3.2 3.0
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.0
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.0 4.8
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.1 5.0 4.9 4.6
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.1 5.1 5.0 4.9 4.9 4.6
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
5.0 5.0 5.0 5.0 5.0 4.9 4.9 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.2 4.2 3.9
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.6 4.5 4.5 4.3 4.3 3.9
Notes: TC: Total Capacity(kW)
8-9
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
ART COOL Mirror
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating Capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
2.2
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
ART COOL Mirror
kW -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
Notes: TC: Total Capacity(kW)
ART COOL Mirror
8-10
ART COOL Mirror
Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
4.5
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4
5.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
7.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
8-11
ART COOL Mirror
7. Air Velocity and Temperature Distribution ARNU07GSE*2 Cooling
Heating
Discharge angle:45°
Discharge angle:60° Air velocity [m/s]
Air velocity [m/s]
2.7m
2m
2m
2.0
2.0
1.5
1m
1m 1.5 1.0
0.5
0.5
5m
4m
3m
2m
0m 0m
1m
5m
4m
1.0
3m
2m
0m 0m
1m
Temperature [°C]
Temperature [°C]
2.7m
2.7m
2m
2m 33
18 30 20
1m
1m 24
22
21
24
5m
4m
3m
2m
1m
0m 0m
5m
4m
27
3m
2m
0m 0m
1m
ARNU12GSE*2 Cooling
Heating
Discharge angle:45°
Discharge angle:60° Air velocity [m/s]
Air velocity [m/s] 2.7m
2.7m
2m
2m 2.0
2.0 1.5
1m
1.5
0.5 0.5
5m
4m
3m
1m
1.0
1.0
2m
1m
0m 0m
5m
4m
3m
2m
0m 0m
1m
Temperature [°C]
Temperature [°C] 2.7m
2.7m
2m
2m 33
18
30
1m
21
1m 20 24
5m
4m
3m
ART COOL Mirror
24
27
22
2m
1m
0m 0m
5m
4m
3m
2m
1m
0m 0m
8-12
ART COOL Mirror
2.7m
8. Electric Characteristics Units ART COOL Mirror
Model
Type
Power Supply Hz
Volts
Voltage Range MCA
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
ARNU07GSE*2
SE
1.29
15
0.02
0.23
40
40
ARNU09GSE*2
SE
1.29
15
0.02
0.23
40
40
ARNU12GSE*2
SE
Max:264
1.29
15
0.02
0.23
40
40
ARNU15GSE*2
SE
Min:198
1.29
15
0.02
0.23
40
40
ARNU18GS8*2
S8
1.29
15
0.02
0.23
35
35
ARNU24GS8*2
S8
1.29
15
0.02
0.23
35
35
ARNU07GSE*2
SE
1.29
15
0.02
0.23
40
40
ARNU09GSE*2
SE
ARNU12GSE*2
SE
ARNU15GSE*2
SE
ARNU18GS8*2 ARNU24GS8*2
50
220 ~ 240
1.29
15
0.02
0.23
40
40
Max:242
1.29
15
0.02
0.23
40
40
Min:198
1.29
15
0.02
0.23
40
40
S8
1.29
15
0.02
0.23
35
35
S8
1.29
15
0.02
0.23
35
35
60
220
Symbols: MCA : Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes(see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA ≤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the MCA.
8-13
ART COOL Mirror
9. Sound Levels Overall Notes: - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1m 1m
ART COOL Mirror
Microphone Sound Levels dB(A)
Model
H 37 39 41 42 37 43
ARNU07GSE*2 ARNU09GSE*2 ARNU12GSE*2 ARNU15GSE*2 ARNU18GS8*2 ARNU24GS8*2
M 33 35 36 36 34 37
L 23 25 27 27 31 32
Sound Pressure Level ARNU07GSE*2
80
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
63
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
NC-25 Approximate Hearing Threshold
70
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
10
Octave Band Sound Pressure Level (dB re 20µPa )
NC-60
Octave Band Sound Pressure Level (dB re 20µPa )
Approximate Hearing Threshold 63
NC-60
NC-50
NC-40
NC-30
10
ARNU24GS8*2 70
NC-60 NC-55 NC-50 NC-45 NC-40 NC-35
Octave Band Sound Pressure Level (dB re 20µPa )
70
NC-65
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
ART COOL Mirror
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-30 20
10
NC-25 Approximate Hearing Threshold 63
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
ARNU18GS8*2
70
30
NC-25 Approximate Hearing Threshold 63
80
40
NC-35
30
80
50
NC-45
40
80
60
NC-55
50
20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
ARNU15GSE*2
NC-65
60
NC-20
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
NC-65
60
20
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU12GSE*2 80
70
70
10
ARNU09GSE*2
80
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
NC-25
20
10
Approximate Hearing Threshold 63
NC-20
NC-15 125 250 500 1000 2000 4000 8000 Octave Band Center Frequency (Hz)
8-14
ART COOL Mirror
10. Installation • Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided
1. Type "A" screw 2. Installation Plate
Required Parts
Required Tools
❏ Installation plate ❏ Four type "A" screws ❏ Connecting cable
❏ Level gauge ❏ Screw driver ❏ Electric drill ❏ Hole core drill
❏ Pipes: Gas side Liquid side ❏ Insulation materials ❏ Additional drain pipe
❏ Flaring tool set ❏ Specified torque wrenches ❏ Spanner......................................................Half union ❏ A glass of water ❏ Screw driver ❏ Thermometer
8-15
ART COOL Mirror
10.1 Selection of the best location
More than 100mm
More than 200mm
• There should not be any heat source or steam near the
More than 100mm More than 2300mm
S8 chassis Installation Plate
Chassis Hook
The mounting wall should be strong and solid enough to protect it from the vibration. Mount the installation plate on the wall with four Type "A" screws. (If mounting the unit on the concrete wall, consider using anchor bolts.) • Always mount the Installation plate horizontally by aligning the marking-off line by means of the thread and a level.
ART COOL Mirror
unit. • There should not be any obstacles to prevent the air circulation. • A place where air circulation in the room will be good. • A place where drainage can be easily obtained. • A place where noise prevention is taken into consideration. • Do not install the unit near the door way. • Ensure the spaces indicated by arrows from the wall, ceiling, fence, or other obstacles.
Type “A”
SE chassis Installation Plate
Chassis Hook
Type “A”
The lower left and the right side of Installation Plate
S8 chassis
Installation plate 133mm
100mm
Installation plate
110mm
Ø70mm
Ø70mm
Ø70mm
Ø70mm
85mm
Left rear piping
Right rear piping
110mm
SE chassis
Left rear piping
65mm
Right rear piping
CAUTION : In case that the unit is installed near the sea, the installation parts may be corroded by salt. The installation parts (and the unit) should be taken appropriate anti-corrosion measures.
ART COOL Mirror
8-16
ART COOL Mirror
Preparing work for installation ■ Preparing the indoor unit's piping and drain hose for installation through the wall. ■ Remove the plastic tubing retainer(see illustration below) and pull the tubing and drain hose away from chassis. ■ Replace the plastic tubing holder in the original position.
3. Tape the tubing, drain hose and the connecting cable. Be sure that the drain hose is located at the lowest side of the bundle. Locating at the upper side can cause drain pan to overflow inside the unit.
Tape Connecting pipe Drain hose
Connecting cable
NOTICE : If the drain hose is routed inside the room, insulate the hose with an insulation material* so that dripping from "sweating"(condensation) will not damage furniture or floors.
For right rear piping
*Foamed polyethylene or equivalent is recommended.
1. Route the indoor tubing and the drain hose in the direction of rear left.
4. Indoor unit installation ■ Hook the indoor unit onto the upper portion of the installation plate.(Engage the two hooks of the rear top of the indoor unit with the upper edge of the installation plate.) Ensure that the hooks are properly seated on the installation plate by moving it left and right.
Drain hose
Connecting cable
Drain hose
2. Insert the connecting cable into the indoor unit from the outdoor unit through the piping hole. ■ Do not connect the cable to the indoor unit. ■ Make a small loop with the cable for easy connection later.
8-17
Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound).
ART COOL Mirror
5. Connecting the pipings to the indoor unit and drain hose to drain pipe. ■ Align the center of the pipings and sufficiently tighten the flare nut by hand.
■ Wrap the area which accommodates the rear piping housing section with vinyl tape. Indoor unit pipe Wrap with vinyl tape
Connection pipe Vinyl tape (wide)
Connecting cable
Indoor unit tubing
Flare nut
Pipings Vinyl tape(narrow)
■ Tighten the flare nut with a wrench. Spanner (fixed) Flare nut Connection pipe
Torque wrench
■ Bundle the piping and drain hose together by wrapping them with vinyl tape over the range within which they fit into the rear piping housing section. Wrap with vinyl tape Pipe
Indoor unit tubing
■ Mount the clamp on the boss with a type "B" screw.(optional)
Type "B" screw
Drain hose
Clamp Boss
Vinyl tape(wide) Drain hose
For left rear piping 1. Route the indoor tubing and the drain hose to the required piping hole position.
■ When extending the drain hose at the indoor unit, install the drain pipe.
Drain pipe
Indoor unit drain hose Vinyl tape(narrow) Adhesive
6. Wrap the insulation material around the connecting portion. ■ Overlap the connection pipe insulation material and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there is no gap. Plastic bands
ART COOL Mirror
2. Insert the piping, drain hose and the connecting cable into the piping hole.
Connecting cable Drain pipe
Insulation material
8-18
ART COOL Mirror
Pipe
ART COOL Mirror
3. Insert the connecting cable into the indoor unit. ■ Don't connect the cable to the indoor unit. ■ Make a small loop with the cable for easy connection later.
■ When extending the drain hose at the indoor unit, install the drain pipe.
Drain hose
4. Tape the drain hose and the connecting cable. • Connecting cable Indoor unit drain hose Vinyl tape(narrow) Adhesive
5. Indoor unit installation ■ Hang the indoor unit from the hooks at the top of the installation plate. ■ Insert the spacer etc. between the indoor unit and the installation plate and separate the bottom of the indoor unit from the wall.
Indoor unit Spacer
Plastic bands
Insulation material
■ Wrap the area which accommodates the rear piping housing section with vinyl tape. Connection pipe
Installation plate 80mm
Vinyl tape (wide)
6. Connecting the pipings to the indoor unit and the drain hose to drain pipe. ■ Align the center of the pipings and sufficiently tighten the flare nut by hand.
Indoor unit tubing
7. Wrap the insulation material around the connecting portion. ■ Overlap the connection pipe heat insulation and the indoor unit pipe heat insulation material. Bind them together with vinyl tape so that there is no gap.
Flare nut
Indoor unit piping Wrap with vinyl tape Pipe
Connecting cable
Vinyl tape (narrow)
Pipings
■ Tighten the flare nut with a wrench.
Spanner (fixed)
Torque wrench
Flare nut Connection pipe
Indoor unit tubing
8-19
ART COOL Mirror
■ Bundle the piping and drain hose together by wrapping them with cloth tape over the range within which they fit into the rear piping housing section.
9. Set the pipings and the drain hose to the back of the chassis with the tubing holder. ■ Hook the edge of tubing holder to tap on chassis and push the bottom of tubing holder to be engaged at the bottom of chassis.
Pipe Drain hose
Wrap with vinyl tape(wide)
8. Reroute the pipings and the drain hose across the back of the chassis.
ART COOL Mirror
Vinyl tape (narrow)
Tubing holder
10. Indoor unit installation ■ Remove the spacer. ■ Ensure that the hooks are properly seated on the installation plate by moving it left and right.
Connecting cable
Piping for passage through piping hole
Drain hose
Press the lower left and right sides of the unit against the installation plate until the hooks engage into their slots(clicking sound).
ART COOL Mirror
8-20
ART COOL Mirror
10.2 Connection of Pipings 1. To remove the front panel from the indoor unit, remove the front panel from the indoor unit cabinet. ■ Set the air direction louvers up-and-down to the position(horizontally) by hand. ■ Remove the securing screws that retain the front panel. Pull the lower left and right sides of the grille toward you and lift it off.
2. To check the drainage. ■ Pour a glass of water on the evaporator. ■ Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit.
Connecting area drain hose
Leakage checking Drain pan
Drain hose Leakage checking
Front panel
■ The drain hose should point downward for easy drain flow. Downward slope
■ Do not make drain piping. Accumulated drain water Air
Do not raise
Water leakage
Water leakage
Waving
Tip of drain hose dipped in water Water leakage
Less than 50mm gap
Ditch
10.3 Connect the cable to the indoor unit 1. Connect the wires to the terminals on the control board individually according to the outdoor unit connection. • Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Remote control co cord
Connecting cable
8-21
ART COOL Mirror
SODU
Terminal Block Indoor 1(L1) 2(L2)
3
4
B
A
IDU -
-
INTERNET DRY1 DRY2 GND 12V Outdoor unit B A -
INDOOR POWER INPUT
ART COOL Mirror
2. Attach the Grille onto the cabinet. • Grasp lower the left and right side of the Grille and engage four tabs on the top inside edge of the chassis. • Press the Grille toward the chassis until it is back into its original place.
CAUTION After the confirmation of the above conditions, prepare the wiring as follows: 1) As for the method of wiring, follow the circuit diagram posted on the inside of control cover. 2) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could cause burn-out of the wires.) 3) Specification of power source. 4) Confirm that electrical capacity is sufficient. 5) See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 6) Confirm that the cable thickness is as specified in the power source specification. (Particularly note the relation between cable length and thickness.) 7) Always install an earth leakage circuit breaker in a wet or moist area. 8) The following would be caused by voltage drop. • Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the normal function of the overload. 9) The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductor.
ART COOL Mirror
8-22
ART COOL Mirror
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
8-23
ART COOL Mirror
11. Accessories Standard Accessories Name
Installation panel
Type "A" screws and plastic anchors
Quantity
1 set
4 set
(Other)
SE
Shape
S8
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
ART COOL Mirror
8-24
ART COOL Mirror
• Owner's manual • Installation manual
ART COOL Gallery
9
ART COOL Gallery ART COOL Panel 1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Electric Characteristics 8. Sound Levels 9. Installation 10. Accessories
ART COOL Gallery
1. List of Functions Category
Air flow
Installation
Reliability
Convenience
Individual control
Special function kit
Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GSF*2, ARNU09GSF*2, ARNU12GSF*2 3 X Auto X O 3/4/3 X O O X Option O O O O O(Heat recovery) O O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory Accessory Accessory -
ART COOL Gallery
Air purifying
Function
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
ART COOL Gallery
9-1
ART COOL Gallery
2. Specifications
Type Model Cooling Capacity
Heating Capacity Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
Unit kW kcal/h Btu/h kW kcal/h Btu/h mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Front Panel('*' Position)
Ø, V, Hz mm2 mm2
ART COOL Gallery ARNU07GSF*2 ARNU09GSF*2 ARNU12GSF*2 2.2 2.8 3.6 1,900 2,400 3,100 7,500 9,600 12,300 2.5 3.2 4.0 2,200 2,800 3,400 8,500 10,900 13,600 600x146x600 600x146x600 600x146x600 23.6x5.7x23.6 23.6x5.7x23.6 23.6x5.7x23.6 2x20x21 2x20x21 2x20x21 0.18 0.18 0.18 Turbo Fan Turbo Fan Turbo Fan 30 30 30 0.16 0.16 0.16 8.1/6.3/4.2 8.1/6.3/4.2 9.3/7.7/6.0 286/222/148 286/222/148 328/272/212 Direct Direct Direct BLDC BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Resin Net(washable) Resin Net(washable) Resin Net(washable) Fuse Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) Ø12.7(1/2) 12.2 12.2 12.2 15(33.1) 15(33.1) 15(33.1) 38/32/27 38/32/27 44/38/32 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C E:Red, V:Silver, G:Gold, 1: Kiss (Photo changeable)
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
9-2
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
ART COOL Gallery
ART COOL Gallery
1
Fix Hole
500
Pipe Hole
W
Hanger Hole
1
H
D
1
Air discharge grill Air suction grill
1 2
600
H
Descripition
(unit : mm)
146
D
(unit : mm)
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: SF
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
600
W
Number
ARNU07GSF*2 ARNU09GSF*2 ARNU12GSF*2
Model
ARNU07GSF*2 ARNU09GSF*2 ARNU12GSF*2
ART COOL Gallery
ART COOL Gallery
2
3. Dimensions
9-3
525
ART COOL Gallery
4. Piping Diagrams
Heat Exchanger Th3
EEV
:Cooling :Heating
Filter
Th2
Turbo Fan
Filter
Th1
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Model
Gas
Liquid
ARNU07GSF*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU09GSF*2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GSF*2
Ø12.7(1/2)
Ø6.35(1/4)
* Panel color:E(Red), V(Silver), G(Gold), 1(Kiss (Photo changeable))
9-4
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
PCB Connector CN-TH1 CN-TH1
ART COOL Gallery
5. Wiring Diagrams SF Chassis
ART COOL Gallery
CONNECTOR NUMBER CN-MOTOR1 CN-COM CN-EEV CN-D1 CN-LR1 CN-LR2 CN-UD CN-TH1 CN-TH2 CN-REMO CN-CC CN-HVB
ART COOL Gallery
LOCATION POINT Fan motor output Communication EEV output Display Step motor Step motor Step motor Room/pipe sensor Discharge pipe sensor Remote controller Dry contact Air clean
FUNCTION Motor output of BLDC Communication between indoor and outdoor EEV control output Display of indoor status Step motor output for left/right Step motor output for left/right Step motor output Room and pipe thermistor Discharge pipe thermistor Remote control line Dry contact line Air clean control
9-5
6. Capacity Tables ART COOL Gallery
6.1 Cooling Capacity Cooling Capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
Capacity Index
Outdoor air temp. (DB, 째C)
2.2
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.2
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.1 1.9
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.1 1.9
Notes: TC: Total Capacity(kW)
9-6
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
ART COOL Gallery
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating Capacity
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
2.2
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
ART COOL Gallery
kW -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
Notes: TC: Total Capacity(kW)
ART COOL Gallery
9-7
7. Electric Characteristics ART COOL Gallery
Units Model
Type
ARNU07GSF*2
SF
ARNU09GSF*2
SF
ARNU12GSF*2
SF
ARNU07GSF*2
SF
ARNU09GSF*2
SF
ARNU12GSF*2
SF
Power Supply Hz 50
Volts 220 ~ 240
60
220
Voltage Range MCA Max:264 Min:198
Max:242 Min:198
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
1.23
15
0.024
0.18
35
35
1.23
15
0.024
0.18
35
35
1.23
15
0.024
0.18
35
35
1.23
15
0.024
0.18
35
35
1.23
15
0.024
0.18
35
35
1.23
15
0.024
0.18
35
35
Symbols: MCA: Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA ≤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the MCA. 5. Instead of fuse, use Circuit Breaker.
9-8
ART COOL Gallery
8. Sound Levels Overall Notes: - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
1m
ART COOL Gallery
0.8m Microphone Sound Levels dB(A)
Model
H
M
L
ARNU07GSF*2
38
32
27
ARNU09GSF*2
38
32
27
ARNU12GSF*2
44
38
32
Sound Pressure Level ARNU07GSF*2 ARNU09GSF*2
ARNU12GSF*2 80
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
80
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
NC-25
20
NC-20
Approximate Hearing Threshold
NC-15
10 63
NC-25
20
Approximate Hearing Threshold 125
250
500
1000 2000 4000 8000
Octave Band Center Frequency (Hz)
ART COOL Gallery
NC-20 NC-15
10 63
125
250
500
1000 2000 4000 8000
Octave Band Center Frequency (Hz)
9-9
ART COOL Gallery
9. Installation • Please read the instruction sheets completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided
1. Installation guide map
2. Type "A" screw and plastic anchors
Required Parts
Required Tools
❏ Four type "A" screws ❏ Connecting cable ❏ Pipes: Gas side Liquid side
❏ Level gauge ❏ Screw driver ❏ Electric drill ❏ Hole core drill ❏ Flaring tool set ❏ Specified torque wrenches ❏ Spanner......................................................Half union ❏ A glass of water ❏ Screw driver ❏ Thermometer
❏ Insulation materials ❏ Additional drain pipe
9.1 Selection of the best location • Do not have any heat or steam near the unit. • Select a place where there are no obstacles in front of the unit. • Make sure that condensation drainage can be conveniently routed away. Do not install near a doorway. • Ensure that the space around the left and right of the unit is more than 500mm. The unit should be installed as high on the wall as possible, allowing a minimum of 200mm from ceiling. • Use a stud finder to locate studs to prevent unnecessary damage to the wall.
9-10
More than 200mm More than 500mm
More than 500mm More than 1500mm
ART COOL Gallery
9.2 Preparing Work for Installation Open panel front 1. Pull the upper part of the front panel. 2. Lift up the panel. 3. To detach the front panel, remove the two screws at the lower part. 4. Detach the front panel from the body. ART COOL Gallery
5. To detach the panel, disconnect the connector at the upper part.
Panel Front Connector
Cover pipe and cover side remove 1. Please remove the screw of the center tuning cover. 2. Pull up the side cover of desired connecting direction, then cover side is separated. 3. Pick the pipe hole of the side cover.
CAUTION: After removing the pipe hole, cut the burr for safety.
Pipe hole Side cover
NOTICE
When making pipe path through rear wall, you don’t need to pick the pipe hole.
Drain hose junction 1. Remove the rubber stopple in the desired drain direction. 2. Insert drain hose into the handle of drain pan, and join drain hose and connecting hose according to the figure by. Adhesive
Onlythe the Only desired desireddirection direction
Connecting part Drain hose
ART COOL Gallery
rubber cap
9-11
ART COOL Gallery
9.3 Fixing Indoor Unit 1. Attach an Installation guide map on the desired surface. INSTALLATION GUIDE MAP
2. Look at suited horizon by horizontal meter on the horizontal setting line, and fix lightly the map by adhesive tape. Horizontality
3. Make a hole with a diameter of 6mm and depth of 30-35mm by piercing a screw point. IN ST AII AT IO N
IN ST AL LA TIO N
GU ID EM AP
4. Drill the pierted part as a diameter of 50mm for connecting piping. (In case of piercing rear surface)
GU ID EM AP
5. Drive the fore plastic anchors into drilled points. IN ST AL LA TIO N
6. First, Drive the two points of the upper parts by screws. (Leave 10mm for hanging the product)
GU ID EM AP
mm
10
Plastic anchors
7. Hang the hole of product at the upper screws, and remove the map. (Falling attention) INS TAL LAT ION GUID EM AP
IN ST AL LA TIO N
GU
8. Drive the lower parts after facing the hole of product with plastic anchors, and fix completely the upper screws. Plastic anchors
Hanger hole (Rear side of the product)
9. Check the fixed product with light power.
9-12
10. In case of nothing wrong, connect the pipe and the wire. (Refer to installation manual)
ART COOL Gallery
9.4 Connecting the Piping Preparing the indoor unit's piping and drain hose for installation through the wall. 1. Route the indoor tubing and the drain hose in the direction of rear left or right
3. Connecting the pipings to the in door unit and drain hose to drain pipe ❏ Align the center of the pipings and sufficiently tighten the flare nut by hand.
Flare nut
ART COOL Gallery
Indoor unit tubing
Pipings
❏ Tighten the flare nut with a wrench.
Drain hose
Spanner (fixed) Flare nut
2. Tape the tubing, drain hose and the connecting cable. Be sure that the drain hose is located at the lowest side of the bundle. Locating at the upper side can cause drain pan to overflow inside the unit.
Torque wrench
Connection pipe
Indoor unit tubing
❏ When extending the drain hose at the indoor unit, install the drain pipe.
Drain pipe
Loop
Connecting cable
Gas side piping Liquid side piping
Drain hose
CAUTION: If the drain hose is routed inside the room, insulate the hose with an insulation material* so that dripping from "sweating"(condensation) will not damage furniture or floors. *Foamed polyethylene or equivalent is recommended.
ART COOL Gallery
Indoor unit drain hose Adhesive
Vinyl tape(narrow)
4. Wrap the insulation material around the connecting portion. ❏ Overlap the connecting pipe insulation material and the indoor unit pipe insulation material. Bind them together with vinyl tape so that there is no gap.
Plastic bands Insulation material
9-13
ART COOL Gallery
CAUTION: Installation Information For right piping. Follow the instruction below. Good case • Press on the upper side of clamp and unfold the tubing to downward slowly.
Bad case • Following bending type from left to right may cause damage to the turbing.
9.5 Drain Piping 1) To check the drainage. • Pour a glass of water on the evaporator. • Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit.
2) Drain piping • The drain hose should point downward for easy drain flow. Downward slope
• Do not make drain piping. Do not raise
Accumulated drain water
Tip of drain hose dipped in water Less than 50mm gap
Air
Water leakage
9-14
Water leakage
Waving
Water leakage
Ditch
ART COOL Gallery
9.6 Panel Front Assembly 1. First, Check the side cover assembly exactly, and fix the power cord in the bottom groove of cover side left.
ART COOL Gallery
2. Assemble connecting lead wire with controller, fix the upper part of panel front, and match the lower part of panel front. Panel Front Connector
3. Screw up panel front, and suspend the hook of panel front in the groove.
ART COOL Gallery
9-15
ART COOL Gallery
9.7 Connect the cable to the Indoor unit. • Connect the cable to the indoor unit by connecting the wires to the terminals on the control board individually according to the outdoor unit connection. (Ensure that the color of the wires of the outdoor unit and the terminal No. are the same as those of the indoor unit.) The earth wire should be longer than the common wires. Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
CAUTION • When installing, refer to the circuit diagram on the Control Box of Indoor Unit. • When installing, refer to the wiring diagram on the Control Cover Inside Outdoor Unit.
CAUTION • The above circuit diagram is subject to change without notice. • Be sure to connect wires according to the wiring diagram. • Connect the wires firmly, so that not to be pulled out easily. • Connect the wires according to color codes by referring the wiring diagram.
9-16
After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have separate power circuit specifically for the air conditioner. As for the method of wiring, follow the circuit diagram posted on the inside of control cover. 2) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could cause burn-out of the wires.) 3) Confirm the specification of power source. 4) Confirm that electrical capacity is sufficient. 5) See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 6) Confirm that the cable thickness is as specified in the power source specification. (Particularly note the relation between cable length and thickness. 7) Always install an earth leakage circuit breaker in a wet or moist area. 8) The following would be caused by voltage drop. • Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the normal function of the overload. 9) The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductor.
ART COOL Gallery
WIRED REMOTE CONTROLLER INSTALLATION • Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
TEMP
ART COOL Gallery
- Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
ART COOL Gallery
9-17
10. Accessories ART COOL Gallery
Standard Accessories Name
Installation guide map
Quantity
1 EA
Type "A" screws and plastic anchors
(Other)
4 SET
• Owner's manual • Installation manual Shape
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
9-18
ART COOL Gallery
Ceiling & Floor Ceiling Suspended 1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Electric Characteristics 8. Sound Levels 9. Installation 10. Accessories
Ceiling & Floor Ceiling Suspended
Ceiling & Floor/Ceiling Suspended
10
1. List of Functions
Ceiling & Floor/Ceiling Suspended
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU09GVEA2, ARNU12GVEA2 ARNU18GVJA2, ARNU24GVJA2 1 Manual Auto X O 3/4/3 X O O X X O X X X O O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O O O O O O Accessory Accessory Accessory Accessory X Accessory -
O : Applied X : Not applied – : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
10-1
Ceiling & Floor Ceiling Suspended
2. Specifications
Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Color
Ø, V, Hz mm2 mm2
Ceiling & Floor ARNU09GVEA2 ARNU12GVEA2 2.8 3.6 2,400 3,100 9,600 12,300 3.2 4.0 2,800 3,400 10,900 13,600 900x200x490 900x200x490 35.4x7.9x19.3 35.4x7.9x19.3 2x12x20 2x12x20 0.10 0.10 Cross Flow Fan Cross Flow Fan 27 27 0.15 0.15 7.6/6.9/6.2 9.2/7.6/6.9 268/243/219 325/268/244 Direct Direct BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø6.35(1/4) Ø6.35(1/4) Ø12.7(1/2) Ø12.7(1/2) 16 16 13.7(30.2) 13.7(30.2) 36/32/28 38/36/30 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Ceiling & Floor Ceiling Suspended
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
10-2
Ceiling & Floor/Ceiling Suspended
Type Model
Ceiling & Floor/Ceiling Suspended
Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch m2 W A CMM cfm
Drive Motor type Temperature Control Sound Absorbing Thermal Insulation Material Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1.5m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable Color
Ø, V, Hz mm2 mm2
Ceiling Suspended ARNU18GVJA2 ARNU24GVJA2 5.6 7.1 4,800 6,100 19,100 24,200 6.3 8.0 5,400 6,900 21,500 27,300 Galvanized Steel Plate+Painting Galvanized Steel Plate+Painting 950x220x650 950x220x650 37.4x8.7x25.6 37.4x8.7x25.6 3x14x19 3x14x19 0.23 0.23 Sirocco Fan Sirocco Fan 60 60 0.30 0.30 16/ 14 /12 18/16/14 565/495/424 636/565/495 Direct Direct BLDC BLDC Microprocessor, Thermostat for cooling and heating Microprocessor, Thermostat for cooling and heating Foamed polystrene Foamed polystrene Fuse Fuse Ø6.35(1/4) Ø9.52(3/8) Ø12.7(1/2) Ø15.88(5/8) 16 16 24.6(54.2) 24.6(54.2) 42/40/37 43/41/39 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220, 60 1, 220, 60 EEV EEV CV1.5 x 3C CV1.5 x 3C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Morning fog Morning fog
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
10-3
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Ceiling & Floor Ceiling Suspended
Air suction grill
587
<Ceiling Installation>
Air discharge grill
900 1
24 2
490
Air discharge grill Air suction grill
1 2
490
H
Descripition
(unit : mm)
200
D
(unit : mm)
CHASSIS CODE: VE
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
900
ARNU09GVEA2 ARNU12GVEA2
Number
W
ARNU09GVEA2 ARNU12GVEA2
Ceiling & Floor
Model
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
<Floor Installation>
200
Signal receiver & Operation indicator
273
Ceiling & Floor Ceiling Suspended
10-4
Ceiling & Floor/Ceiling Suspended
879
3. Dimensions
950
800
1
2
41
650
10-5
Ceiling & Floor Ceiling Suspended
Note
650
H
Descripition
(unit : mm)
220
D
(unit : mm)
CHASSIS CODE: VJ
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Air suction grill
1 2
Name Air discharge grill
Number
950
ARNU18GVJA2 ARNU24GVJA2
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
(Ceiling Suspended type)
220
W
Model
ARNU18GVJA2 ARNU24GVJA2
Ceiling Suspended
Ceiling & Floor/Ceiling Suspended
4. Piping Diagrams VE
Th3
EEV
:Cooling :Heating
Filter
Th2 C.F.F.
Th1
Filter
lndoor unit
VJ Heat Exchanger
EEV
:Cooling :Heating
Filter
Th2
Th3 Sirocco Fan
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Model
Gas
Liquid
ARNU09GVEA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU12GVEA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU18GVJA2
Ø12.7(1/2)
Ø6.35(1/4)
ARNU24GVJA2
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
Ceiling & Floor Ceiling Suspended
10-6
Ceiling & Floor/Ceiling Suspended
Heat Exchanger
5. Wiring Diagrams
Ceiling & Floor/Ceiling Suspended
VE Chassis
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-MOTOR2 CN-PIPE/OUT CN-PIPE/IN CN-ROOM CN-REMO CN-FLOAT CN-EEV CN-OPTION CN-COM CN-D/PUMP CN-POWER CN-DISPLAY CN-DOOR CN-CC
SPEC.
DESCRIPTION
AC power supply Fan motor output Fan motor output Discharge pipe sensor Suction pipe sensor Room sensor Remote controller Float switch input EEV output Option pwb. Communication Drain pump output AC power supply Display wire Door lock switch Dry contact
AC power line input for indoor controller Motor output of BLDC Motor output of BLDC Pipe out thermistor Pipe in thermistor Room thermistor Remote control line Float switch sensing EEV Control output Communication between main and option Communication between indoor and outdoor AC Output for drain pump AC Power line input for indoor controller Display wire line Door lock switch line Dry contact line
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory â&#x2020;&#x2019; Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
10-7
Ceiling & Floor Ceiling Suspended
VJ Chassis Ceiling & Floor/Ceiling Suspended
CONNECTOR NUMBER CN-POWER CN-MOTOR1 CN-MOTOR2 CN-PIPE/OUT CN-PIPE/IN CN-ROOM CN-REMO CN-FLOAT CN-EEV CN-OPTION CN-COM CN-D/PUMP CN-POWER CN-DISPLAY CN-DOOR CN-CC
SPEC.
DESCRIPTION
AC power supply Fan motor output Fan motor output Discharge pipe sensor Suction pipe sensor Room sensor Remote controller Float switch input EEV output Option pwb. Communication Drain pump output AC power supply Display wire Door lock switch Dry contact
AC power line input for indoor controller Motor output of BLDC Motor output of BLDC Pipe out thermistor Pipe in thermistor Room thermistor Remote control line Float switch sensing EEV Control output Communication between main and option Communication between indoor and outdoor AC Output for drain pump AC Power line input for indoor controller Display wire line Door lock switch line Dry contact line
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory â&#x2020;&#x2019; Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
Ceiling & Floor Ceiling Suspended
10-8
6. Capacity Tables
Ceiling & Floor/Ceiling Suspended
6.1 Cooling Capacity
Cooling capacity
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
2.8
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.7 1.6 1.5
3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.5
3.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.4
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.3
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.5 2.5 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.1 1.9
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.7 2.7 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.1 1.9
5.6
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.7
5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.6
6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.8 3.8 3.5
6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.9 3.9 3.9 3.9 3.9 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.6 3.5 3.4 3.4 3.3 3.2 3.0
7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
4.2 4.2 4.1 4.1 4.0 4.0 4.0 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.0
Capacity Index
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
10-9
30 22 TC SHC kW kW
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Ceiling & Floor Ceiling Suspended
Cooling capacity
Outdoor air temp. (DB, 째C)
7.1
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
Notes: TC: Total Capacity(kW)
Ceiling & Floor Ceiling Suspended
20 14 TC SHC kW kW
23 16 TC SHC kW kW
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2
4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.8
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.0 4.9 4.8 4.6
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.3 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.5
30 22 TC SHC kW kW 8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
5.0 5.0 5.0 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 3.8
32 24 TC SHC kW kW 9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.6 4.5 4.5 4.4 4.3 4.2 3.8
SHC: Sensible Heat Capacity(kW)
10-10
Ceiling & Floor/Ceiling Suspended
Capacity Index
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
Ceiling & Floor/Ceiling Suspended
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
5.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2
4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7
4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3
4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1
4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9
4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5
Notes: TC: Total Capacity(kW)
10-11
Ceiling & Floor Ceiling Suspended
Heating capacity
7.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
Ceiling & Floor Ceiling Suspended
10-12
Ceiling & Floor/Ceiling Suspended
Outdoor air temp. Capacity Index DB(째C) WB(째C)
7. Electric Characteristics Units Ceiling & Floor/Ceiling Suspended
Model
Type
ARNU09GVEA2 ARNU12GVEA2 ARNU18GVJA2 ARNU24GVJA2
VE VE VJ VJ
ARNU09GVEA2 ARNU12GVEA2 ARNU18GVJA2 ARNU24GVJA2
VE VE VJ VJ
Power Supply Hz
50
Volts
220 ~ 240
60
220
Voltage Range MCA Max:264 Min:198
Max:242 Min:198
IFM
Input(W)
MFA
kW
FLA
Cooling Heating
1.22 1.22
15 15
0.027 0.027
0.17 0.17
30 30
30 30
1.43 1.43
15 15
0.060 0.060
0.35 0.35
63 63
63 63
1.22 1.22 1.43 1.43
15 15 15 15
0.027 0.027 0.060 0.060
0.17 0.17 0.35 0.35
30 30 63 63
30 30 63 63
Symbols: MCA: Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA + 1 MFA â&#x2030;¤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the MCA. 5. Instead of fuse, use Circuit Breaker.
10-13
Ceiling & Floor Ceiling Suspended
8. Sound Levels Overall
1m
1m Microphone
Model
H
Sound Levels dB(A) M L
Model
H
Ceiling & Floor/Ceiling Suspended
Notes: - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
Sound Levels dB(A) M L
ARNU09GVEA2
36
32
28
ARNU18GVJA2
42
40
37
ARNU12GVEA2
38
36
30
ARNU24GVJA2
43
41
39
Sound Pressure Level ARNU18GVJA2
ARNU12GVEA2 80
70
70
70
NC-65 60 NC-60 NC-55
50
NC-50 NC-45 40 NC-40 NC-35
30
NC-30
NC-25
20 Approximate Hearing Threshold
NC-60
NC-50 NC-45 40 NC-40
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
NC-35
30
NC-30
NC-25
20 Approximate Hearing Threshold
NC-15 125
NC-55
50
NC-20
10 63
NC-65 60
NC-65 60 NC-60
NC-15 125
250
500
1000
2000
4000
Octave Band Center Frequency (Hz)
8000
NC-55
50
NC-50 NC-45 40 NC-40 NC-35
30
NC-30
NC-25
20 Approximate Hearing Threshold
NC-20
10 63
Octave Band Sound Pressure Level (dB re 20µPa )
80
Octave Band Sound Pressure Level (dB re 20µPa )
Octave Band Sound Pressure Level (dB re 20µPa )
ARNU09GVEA2 80
NC-20 NC-15
10 63
125
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
ARNU24GVJA2 80
Octave Band Sound Pressure Level (dB re 20µPa )
70
NC-65 60 NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30
20
10
NC-25 Approximate Hearing Threshold 63
NC-20 NC-15 125
250
500
1000
2000
4000
8000
Octave Band Center Frequency (Hz)
Ceiling & Floor Ceiling Suspended
10-14
Ceiling & Floor/Ceiling Suspended
9. Installation • Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
9.1 Features 9.1.1 VE Chassis
Vertical louver
Horizontal louver Air outlet vent
Air filters (behind front panel) Air inlet vent
10-15
Ceiling & Floor Ceiling Suspended
9.1.2 VJ Chassis Ceiling & Floor/Ceiling Suspended
Air Discharge
Right Side Cover
Signal Receptor
Air Filter
Left Side Cover
Inlet Grill
Drain hose
Ceiling & Floor Ceiling Suspended
10-16
Ceiling & Floor/Ceiling Suspended
VE Chassis 9.2 Installation Map NOTICE
Installation parts you should purchase.
There should be no gap between the ceiling and the unit.
Ceiling Mounting
Sleeve Bushing-Sleeve Putty(Gum Type Sealer) More than 200mm (Left and right are identical)
More than 50mm
Bend the pipe as closely on the wall as possible, but be careful that it doesn't break.
Wall Mounting
More than 200mm (Left and right are identical)
Vinyl tape (Wide) â&#x20AC;˘ To carry out the drainage test, remove the air filters and pour water into the heat exchanger. â&#x20AC;˘ Apply after carrying out a drainage test.
More than 50mm
Saddle
10-17
Ceiling & Floor Ceiling Suspended
9.3 Select the best Location More than 200mm
1. Do not have any heat or steam near the unit. 2. Select a place where there are no obstacles in front of the unit.
More than 200mm
3. Make sure that condensation drainage can be conveniently routed away. More than 500mm
4. Do not install near a doorway. 5. Ensure that the interval between a wall and the left (or right) of the unit is more than 200mm. The unit should be installed as low as possible on the wall, allowing a minimum of 500mm from floor.
More than 200mm
6. Use a stud finder to locate studs to prevent unnecessary damage to the wall. More than 500mm
More than 200mm
9.4 Preparing Work for Installation Open panel front 1. Remove the five screws. 2. Release the claws in the 3 places indicated. 3. Pull up the Front Panel.
2 Claw
Cover pipe and cover side remove 1. Pull up the side cover of desired connecting direction, then cover side is separated. 2. Pick the pipe hole of the side cover.
1
3
CAUTION: After removing the pipe hole, cut the burr for safety. NOTICE
When making pipe path through rear wall, you donâ&#x20AC;&#x2122;t need to pick the pipe hole.
Drain hose junction 1. Remove the rubber stopple in the desired drain direction. 2. Insert drain hose into the handle of drain pan, and join drain hose and connecting hose according to the figure as shown on the right.
Ceiling & Floor Ceiling Suspended
10-18
Ceiling & Floor/Ceiling Suspended
Indoor unit
Ceiling & Floor/Ceiling Suspended
9.5 Mounting the installation plate(Wall Mounting) The wall you select should be strong and solid enough to prevent vibration 1. Mount the installation plate on the wall with type "A" screws. While mounting the unit on a concrete wall, use anchor bolts. â&#x20AC;˘ Mount the installation plate horizontally by aligning the centerline using a level.
2. Measure the wall and mark the centerline. It is also important to use caution concerning the location of the installation plate-routing of the wiring to power outlets is through the walls typically. Drilling the hole through the wall for piping connections must be done safely.
Installation Plate
Type "A" screw
70
70 Installation plate
Ă&#x2DC;70mm
120
Ă&#x2DC;70mm
more than 2000 Left rear piping
Right rear piping Floor
10-19
Ceiling & Floor Ceiling Suspended
9.6 Mounting the anchor Nut & Bolt(Ceiling Mounting) • Measure and mark the position for the Suspension bolts and the piping hole. • Drill the hole for anchor nut on the ceiling.
Anchor nut Ceiling Nut
Washer
Suspension bolts
• Insert the nuts and washer onto the suspension bolts for locking the suspension bolts on the ceiling.
40
235 820
Suspension bolt
50 100
• Mount the suspension bolts to the anchor-nuts firmly. • Secure the hangers onto the Suspension bolts (adjust level roughly.) using nuts, washers and spring washers.
Reference of piping hole (Ø45)
piping hole (Ø45)
• Adjust a level with a level gauge on the direction of left-right, back-forth by adjusting suspension bolts. • Adjust a level on the direction of top-bottom by adjusting supension bolts. Then the unit will be inclined to the bottomside so as to drain well.
: Tighten the nut and bolt to prevent unit falling.
Suspension bolts Spring washer Hangen Max. 12mm
Nut
Washer
Hanging bolt (W3/8 or M10) Nut (W3/8 or M10)
Flat washer for M10 (accessory)
Flat washer for M10 (accessory) Nut (W3/8 or M10)
Ceiling & Floor Ceiling Suspended
10-20
Ceiling & Floor/Ceiling Suspended
• Prepare 4 suspension bolts. (Each bolts length should be same.)
Ceiling & Floor/Ceiling Suspended
: Installation Information For right piping. Follow the instruction below.
Good case
Bad case
For left piping. Follow the instruction below.
1. Following bending type from right to left could cause problem of pipe damage.
1. Press on the upper side of clamp. ( ) 2. Unfold the tubing downward slowly. ( ) 3. Bend the tubing to the left side of chassis.
10-21
Ceiling & Floor Ceiling Suspended
9.7 Checking the Drainage Ceiling & Floor/Ceiling Suspended
1. Set the air direction louvers up-and-down to the position(horizontally) by hand.
To check the drainage. 1. Pour a glass of water on the evaporator using a kettle. 2. Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit. ■ Checking the Drainage 1. Remove the Air Filter. • To remove air filter, take hold of tab and pull slightly upwards. 2. Check the drainage. • Spray one or two glasses of water upon the evaporator. • Ensure that water flows drain hose of indoor unit without any leakage.
Drain piping
Downward slope
1. The drain hose should point downward for easy drain flow. 2. Do not make drain piping like the following.
Accumulated drain water Air
Do not raise
Water leakage
Water leakage
Waving
Less than 50mm gap
Tip of drain hose dipped in water Water leakage
Ditch
9.8 Panel Front Assembly 1. Suspend the hook of panel front in the groove. 2. Press the panel front.
1
3. Screw up panel front. 3 2
Ceiling & Floor Ceiling Suspended
10-22
Ceiling & Floor/Ceiling Suspended
VJ Chassis 9.9 Select the best Location Indoor unit 1. Do not have any heat or steam near the unit.
More than 700mm
2. Select a place where there are no obstacles in front of the unit. 3. Make sure that condensation drainage can be conveniently routed away. 4. Do not install near a doorway. 5. Ensure that the interval between a wall and the left (or right) of the unit is more than 700mm. 6. Use a stud finder to locate studs to prevent unnecessary damage to the wall.
More than 700mm
More than 300mm
: In case that the unit is installed near the sea, the installation parts may be cor-
roded by salt. The installation parts (and the unit) should be treated with appropriate anti-corrosion measures.
10-23
Ceiling & Floor Ceiling Suspended
9.10 Preparing Work for Installation
2. Unlock side-cover from side panel by slightly pulling the edge of side cover. 3. Tap the side-cover with your palm on the backside.(Inlet grill side.) 4. Hold the side-cover with other hand while tapping to prevent it to fall down.
2 Edge part
1
5. Remove the rubber stopple in the desired drain direction. 6. Knock out the pipe hole from the left side-cover with the help or nipper/plier. 7. Knock hole on right side-cover only if right side is selected for water drain.
Ceiling & Floor Ceiling Suspended
10-24
Ceiling & Floor/Ceiling Suspended
Open side cover 1. Remove two screws from side-cover as shown in fig.
• Prepare 4 suspension bolts. (Each bolts length should be same.)
(Unit: mm) DIM. MODEL VJ
• Measure and mark the position for the Suspension bolts and the piping hole.
A
B
855
320
• Drill the hole for anchor nut on the ceiling. • Insert the nuts and washer onto the suspension bolts for locking the suspension bolts on the ceiling. • Mount the suspension bolts to the anchor-nuts firmly.
Anchor nut
B
A
Ceiling
Suspension bolt Nut
Washer
Suspension bolts
• Secure the hangers onto the Suspension bolts (adjust level roughly.) using nuts, washers and spring washers. • Adjust a level with a level gauge on the direction of left-right, back-forth by adjusting suspension bolts. Suspension bolts
• Adjust a level on the direction of top-bottom by adjusting supension bolts. Then the unit will be inclined to the bottomside so as to drain well.
Spring washer Hangen
Nut
Max. 12mm
: Tighten the nut and bolt to prevent unit falling.
Washer
Hanging bolt (W3/8 or M10) Nut (W3/8 or M10)
Flat washer for M10 (accessory)
Spring washer (M10) Flat washer for M10 (accessory) Nut (W3/8 or M10)
DRILL A HOLE IN THE WALL.
WALL Indoor
Outdoor
10-25
(3/16"~5/16")
• Drill the piping hole with a ø70mm hole core drill. Drill the piping hole at either the right or the left with the hole slightly slanted to the outdoor side.
5-7mm
Ceiling & Floor/Ceiling Suspended
MOUNTING THE ANCHOR NUT AND BOLT
Ceiling & Floor Ceiling Suspended
9.11 Indoor unit installation
: Installation Information For Declination
1. Inclination of the indoor unit is very important for drain purposes in the convertible type air conditioner. 2. Minimum thickness of the insulation for the connecting pipe shall be 10mm. 3. If the Installation Plates are fixed to horizontal line, the indoor unit after installing will be declined to the bottomside.
Front of view • The unit must be horizontal or inclined at angle. • The inclination should be less than or equal to 1° or in between 10 to 20mm inclined in drain direction as shown in fig. Ceiling 10~20mm
Side of view • The unit must be inclined to the bottomside of the unit when finished installation. Ceiling 5~10mm
Ceiling & Floor Ceiling Suspended
10-26
Ceiling & Floor/Ceiling Suspended
Hang the Indoor unit on suspension bolt as per following guidelines: 1. Lift the indoor unit to sufficient height. 2. Insert the suspended part of four suspension bolt in the four hangers provided on the side of main body one by one. 3. Lower the indoor unit till the hangers rest on their respective flat washer. 4. Adjust the level in the top down direction by adjusting the suspension bolts. Inclined the indoor unit as per direction provided in the fig
Ceiling & Floor/Ceiling Suspended
9.12 Checking the Drainage 1. Set the air direction louvers up-and-down to the position(horizontally) by hand.
To check the drainage. 1. Pour a glass of water on the evaporator using a kettle. 2. Ensure the water flows through the drain hose of the indoor unit without any leakage and goes out the drain exit.
Drain piping Downward slope
1. The drain hose should point downward for easy drain flow.
2. Do not make drain piping like the following. Accumulated drain water Air
Do not raise
Water leakage
10-27
Water leakage
Waving
Tip of drain hose dipped in water Water leakage
Less than 50mm gap
Ditch
Ceiling & Floor Ceiling Suspended
9.13 Wiring Connection
Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING : Make sure that the screws of the terminal are free from looseness.
Ceiling & Floor Ceiling Suspended
10-28
Ceiling & Floor/Ceiling Suspended
Connect the wires to the terminals on the control board individually according to the outdoor unit connection. â&#x20AC;˘ Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Ceiling & Floor/Ceiling Suspended
CAUTION: After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have a separate power circuit specially for the air conditioner. As for the method of wiring, follow the circuit diagram posted on the inside of control box cover. 2) Provide a circuit breaker switch between power source and the unit. 3) The screws which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could give rise to burn-out of the wires.) 4) Specification of power source 5) Confirm that electrical capacity is sufficient. 6) Be sure that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 7) Confirm that the cable thickness is as specified in the power sources specification. (Particularly note the relation between cable length and thickness.) 8) Never fail to equip a leakage breaker where it is wet or moist. 9) The following troubles would be caused by voltage drop-down. â&#x20AC;˘ Vibration of a magnetic switch, damage on the contact point, fuse breaking, disturbance by the normal function of an overload protection device. â&#x20AC;˘ Proper starting power is not given to the compressor.
10-29
Ceiling & Floor Ceiling Suspended
WIRED REMOTE CONTROLLER INSTALLATION
Do not install the remote controller where it can be affected by: - Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Ceiling & Floor Ceiling Suspended
10-30
Ceiling & Floor/Ceiling Suspended
â&#x20AC;˘ Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
10. Accessories
Ceiling & Floor/Ceiling Suspended
Standard Accessories Name
Installation plate
Type "A" screw and plastic anchor
Quantity
1EA
4EA
(Other)
• Owner's manual • Installation manual Shape
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
10-31
Ceiling & Floor Ceiling Suspended
11
1. List of Functions 2. Specifications 3. Dimensions 4. Piping Diagrams 5. Wiring Diagrams 6. Capacity Tables 7. Air Velocity and Temperature Distribution 8. Electric Characteristics 9. Sound Levels 10. Installation 11. Accessories
Floor Standing
Floor Standing
Floor Standing
1. List of Functions
Floor Standing
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Special function kit
Function Air supply outlet Airflow direction control(left & right) Airflow direction control(up & down) Auto swing(left & right) Auto swing(up & down) Airflow steps(fan/cool/heat) Chaos swing Chaos wind(auto wind) Jet cool(Power wind) Swirl wind Deodorizing filter Plasma air purifier Prefilter(washable / anti-fungus) Drain pump E.S.P. control Electric heater(operation) High ceiling operation Hot start Self diagnosis Soft dry operation Auto changeover Auto cleaning Auto operation(artificial intelligence) Auto restart operation Child lock Forced operation Group control Sleep mode Timer(on/off) Timer(weekly) Two thermistor control Wide wired remote controller Deluxe wired remote controller Simple wired remote controller Wired remote controller(for hotel use) Wireless remote controller(simple) Wireless LCD remote control Zone control CTIE Electro thermostat
ARNU07GCEA2, ARNU09GCEA2, ARNU12GCEA2 ARNU15GCEA2, ARNU18GCFA2, ARNU24GCFA2 ARNU07GCEU2, ARNU09GCEU2, ARNU12GCEU2 ARNU15GCEU2, ARNU18GCFU2, ARNU24GCFU2 1 3/3/3 X X O X O X O O O O(Heat recovery) X O(Heat pump or Cooling only) O O O X O O O Accessory Accessory Accessory Accessory X Accessory -
O : Applied X : Not applied â&#x20AC;&#x201C; : No relation Option : Model name & price are different according to options, and assembled in factory with main unit. Accessory : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
11-1
Floor Standing
2. Specification Type Model Cooling Capacity
Heating Capacity Casing Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch m2 W A CMM cfm
Drive Motor type Temperature Control
Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
ARNU07GCEA2 2.2 1,900 7,500 2.5 2,200 8,500 Galvanized Steel Plate 1,067x203x635 42.2x8.0x25.0 2x12x19 0.16 Sirocco Fan 28 0.15 8.5/7.5/6.5 300/265/229 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 27(59.5) 35/33/31 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Floor Standing ARNU09GCEA2 2.8 2,400 9,600 3.2 2,800 10,900 Galvanized Steel Plate 1,067x203x635 42.2x8.0x25.0 2x12x19 0.16 Sirocco Fan 28 0.15 9.5/8.5/7.5 335/300/265 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 27(59.5) 36/34/32 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Floor Standing
ARNU12GCEA2 3.6 3,100 12,300 4.0 3,400 13,600 Galvanized Steel Plate 1,067x203x635 42.2x8.0x25.0 2x12x19 0.16 Sirocco Fan 28 0.15 10.5/9.5/8.5 371/335/300 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 27(59.5) 37/35/33 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
11-2
Floor Standing
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Floor Standing
Type Model Cooling Capacity
Heating Capacity
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Casing Dimensions(WxDxH) Body Coil
Fan
Rows x Columns x FPI Face Area Type Motor Output x Number Running Current Air Flow Rate(H/M/L)
mm inch m2 W A CMM cfm
Drive Motor type Temperature Control
Sound Absorbing Thermal Insulation Material Air Filter Safety Device Liquid Side mm(inch) Pipe Connections Gas Side mm(inch) Drain Pipe(Internal Dia.) mm Net Weight kg(lbs) Noise Level(Sound Press, 1m, H/M/L) dB(A) Power Supply Refrigerant Control Power cable Transmission cable
Ø, V, Hz mm2 mm2
ARNU07GCEU2 2.2 1,900 7,500 2.5 2,200 8,500 Galvanized Steel Plate 978x190x639 38.5x7.5x25.2 2x12x19 0.16 Sirocco Fan 28 0.15 8.5/7.5/6.5 300/265/229 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 20(44.1) 35/33/31 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Floor Standing ARNU09GCEU2 2.8 2,400 9,600 3.2 2,800 10,900 Galvanized Steel Plate 978x190x639 38.5x7.5x25.2 2x12x19 0.16 Sirocco Fan 28 0.15 9.5/8.5/7.5 335/300/265 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 20(44.1) 36/34/32 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
11-3
ARNU12GCEU2 3.6 3,100 12,300 4.0 3,400 13,600 Galvanized Steel Plate 978x190x639 38.5x7.5x25.2 2x12x19 0.16 Sirocco Fan 28 0.15 10.5/9.5/8.5 371/335/300 Direct BLDC Microprocessor, Thermostat for cooling and heating Foamed polystrene Resin Net(washable) Fuse Ø6.35(1/4) Ø12.7(1/2) 12 20(44.1) 37/35/33 1, 220 ~ 240, 50 1, 220, 60 EEV CV1.5 x 3C CVV-SB 1.25 x 2C Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Floor Standing
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
Floor Standing
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
11-4
Floor Standing
Floor Standing ARNU15GCEA2 ARNU18GCFA2 ARNU24GCFA2 4.5 5.6 7.1 3,900 4,800 6,100 Cooling Capacity 15,400 19,100 24,200 5.0 6.3 8.0 4,300 5,400 6,900 Heating Capacity 17,100 21,500 27,300 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate Casing 1,067x203x635 1,345x203x635 1,345x203x635 mm Dimensions(WxDxH) Body 42.2x8.0x25.0 52.9x8.0x25.0 52.9x8.0x25.0 inch 2x12x19 3x11x19 3x11x19 Rows x Columns x FPI Coil 0.16 0.23 0.23 Face Area m2 Sirocco Fan Sirocco Fan Sirocco Fan Type 28 76 76 Motor Output x Number W 0.15 0.38 0.38 Running Current A 11.5/10/9.5 16/14/12 18/16/14 Fan Air Flow Rate(H/M/L) CMM 406/353/335 565/494/424 635/565/494 cfm Direct Direct Direct Drive BLDC BLDC BLDC Motor type Microprocessor, Thermostat Microprocessor, Thermostat Microprocessor, Thermostat Temperature Control for cooling and heating for cooling and heating for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Resin Net(washable) Resin Net(washable) Resin Net(washable) Air Filter Fuse Fuse Fuse Safety Device Ø6.35(1/4) Ø6.35(1/4) Ø9.52(3/8) Liquid Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø15.88(5/8) Pipe Connections Gas Side mm(inch) 12 12 12 Drain Pipe(Internal Dia.) mm 27(59.5) 34(75.0) 34(75.0) Net Weight kg(lbs) 38/37/35 40/37/34 43/40/37 Noise Level(Sound Press, 1m, H/M/L) dB(A) 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2 Type Model
Floor Standing ARNU15GCEU2 ARNU18GCFU2 ARNU24GCFU2 4.5 5.6 7.1 3,900 4,800 6,100 Cooling Capacity 15,400 19,100 24,200 5.0 6.3 8.0 4,300 5,400 6,900 Heating Capacity 17,100 21,500 27,300 Galvanized Steel Plate Galvanized Steel Plate Galvanized Steel Plate Casing 978x190x639 1,256x190x639 1,256x190x639 mm Dimensions(WxDxH) Body 38.5x7.5x25.2 49.5x7.5x25.2 49.5x7.5x25.2 inch 2x12x19 3x11x19 3x11x19 Rows x Columns x FPI Coil 0.16 0.23 0.23 Face Area m2 Sirocco Fan Sirocco Fan Sirocco Fan Type 28 76 76 Motor Output x Number W 0.15 0.38 0.38 Running Current A 11.5/10/9.5 16/14/12 18/16/14 Fan Air Flow Rate(H/M/L) CMM 406/353/335 565/494/424 635/565/494 cfm Direct Direct Direct Drive BLDC BLDC BLDC Motor type Microprocessor, Thermostat Microprocessor, Thermostat Microprocessor, Thermostat Temperature Control for cooling and heating for cooling and heating for cooling and heating Foamed polystrene Foamed polystrene Foamed polystrene Sound Absorbing Thermal Insulation Material Resin Net(washable) Resin Net(washable) Resin Net(washable) Air Filter Fuse Fuse Fuse Safety Device Ø6.35(1/4) Ø6.35(1/4) Ø9.52(3/8) Liquid Side mm(inch) Ø12.7(1/2) Ø12.7(1/2) Ø15.88(5/8) Pipe Connections Gas Side mm(inch) 12 12 12 Drain Pipe(Internal Dia.) mm 20(44.1) 27(59.5) 27(59.5) Net Weight kg(lbs) 38/37/35 40/37/34 43/40/37 Noise Level(Sound Press, 1m, H/M/L) dB(A) 1, 220 ~ 240, 50 1, 220 ~ 240, 50 1, 220 ~ 240, 50 Power Supply Ø, V, Hz 1, 220, 60 1, 220, 60 1, 220, 60 EEV EEV EEV Refrigerant Control CV1.5 x 3C CV1.5 x 3C CV1.5 x 3C Power cable mm2 CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C CVV-SB 1.25 x 2C Transmission cable mm2
Floor Standing
Type Model
Unit kW kcal/h Btu/h kW kcal/h Btu/h
Notes:1. Capacities are based on the following conditions: Cooling • Indoor temp. 27°C[80.6°F]DB/ 19°C[66.2°F]WB • Outdoor temp. 35°C[95°F]DB/ 24°C[75.2°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero Heating • Indoor temp. 20°C[68°F]DB/ 15°C[59°F]WB • Outdoor temp. 7°C[44.6°F]DB/ 6°C[42.8°F]WB • Interconnecting Piping Length 7.5m • Level Difference of Zero 2. Capacities are net capacities 3. Due to our policy of innovation some specifications may be changed without prior notification 4. To be added for more available Models 5. EEV : Electronic Expansion Valve
11-5
Conversion Formula kcal/h= kW x 860 Btu/h = kW x 3412 cfm = m3/min x 35.3 l/s = CMM x 1000/60
Floor Standing
148.3
<Without Case>
978 794
<With Case> 2
1067
13
148.3
1
635 70 20.4 62.8
Floor Standing
11-6
190 161
203
14
Air discharge grill Air suction grill
1 2
639
635
H
Descripition
(unit : mm)
190
203
D
(unit : mm)
ARNU07GCEU2 ARNU09GCEU2 ARNU12GCEU2 ARNU15GCEU2
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: CE
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
978
ARNU07GCEU2 ARNU09GCEU2 ARNU12GCEU2 ARNU15GCEU2
Number
1067
W
ARNU07GCEA2 ARNU09GCEA2 ARNU12GCEA2 ARNU15GCEA2
Model
ARNU07GCEA2 ARNU09GCEA2 ARNU12GCEA2 ARNU15GCEA2
Floor Standing
Floor Standing
1067
3. Dimensions
49
639
148.3
70
21.4
639
<Without Case>
1256 1098 1072
<With Case>
1048.4
1345
2
203 635 109.8 30
148.3
70 81.4 145
11-7
Floor Standing
49.4
1
190 161
203
14
Air discharge grill Air suction grill
1 2
639
635
H
Descripition
(unit : mm)
190
203
D
(unit : mm)
ARNU18GCFU2 ARNU24GCFU2
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea
CHASSIS CODE: CF
2. Unit shall be grounded in accordance with the local regulations or applicable national codes.
1. Unit should be installed in compliance with the installation manual in the product box.
Note
Name
Number
1256
1345
ARNU18GCFA2 ARNU24GCFA2 ARNU18GCFU2 ARNU24GCFU2
W
Model
ARNU18GCFA2 ARNU24GCFA2
Floor Standing
Floor Standing
4. Piping Diagrams
Heat Exchanger
EEV
Filter
:Cooling :Heating
Th2
Th3 Sirroco Fan
Floor Standing
Th1
Filter
lndoor unit
Refrigerant pipe connection port diameter [unit: mm(inch)]
Model ARNU07GCEA2 ARNU07GCEU2 ARNU09GCEA2 ARNU09GCEU2 ARNU12GCEA2 ARNU12GCEU2 ARNU15GCEA2 ARNU15GCEU2 ARNU18GCFA2 ARNU18GCFU2 ARNU24GCFA2 ARNU24GCFU2
Floor Standing
Gas
Liquid
Ø12.7(1/2)
Ø6.35(1/4)
Ø12.7(1/2)
Ø6.35(1/4)
Ø12.7(1/2)
Ø6.35(1/4)
Ø12.7(1/2)
Ø6.35(1/4)
Ø12.7(1/2)
Ø6.35(1/4)
Ø15.88(5/8)
Ø9.52(3/8)
LOC.
Description
Th1
Room thermistor
Th2
Pipe in thermistor
Th3
Pipe out thermistor
11-8
5. Wiring Diagrams
Floor Standing
CE/CF Chassis
CONNECTOR NUMBER
CN-POWER CN-MOTOR1 CN-MOTOR2 CN-D/PUMP CN-COMM CN-EEV CN-FLOAT CN-PIPE/IN CN-PIPE/OUT CN-ROOM CN-REMO CN-OPTION CN-ZONE CN-DISPLAY CN-CC
LOCATION POINT
FUNCTION
AC power supply Fan motor output Fan motor output Drain pump output Communication EEV output Float switch input Suction pipe sensor Discharge pipe sensor Room sensor Remote controller Option PCB Zone controller RF Remote controller Dry contact
AC Power line input for indoor controller Motor output of bldc Motor output of bldC AC Output for drain pump Communication between indoor and outdoor EEV Control output Float switch sensing Pipe in thermistor Pipe out thermistor Room thermistor Remote control line Communication between main and option Zone control line RF Remote control line Dry contact line
Dip Switch Setting SW3 GROUP
Off Master
On Slave
SW4
DRY CONTACT
Variable
Auto
SW5
EXTRA 1
Off
On
Remarks Group Control setting using Wired Remote Controller Old Dry Contact Mode Setting 1. Variable : Auto/Manual Mode can be chosen by Wide wired remote controller or Wireless remote controller (When shipped from Factory â&#x2020;&#x2019; Manual Mode) 2. Auto : For Dry Contact, it is always Auto mode. 1. Duct model -. OFF : Default(not operate continuosly ) -. ON : Fan operate continuosly 2. Cassette Model : No Function 3. Ceiling Suspended Model -. OFF : Ceiling(default) -. ON : Floor
CAUTION For Multi V Model, Dip Switch 1,2,6,7,8 must be set OFF That dip switch is used for the other model.
11-9
Floor Standing
6. Capacity Tables 6.1 Cooling Capacity Capacity Index
2.8
3.6
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9
1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7 1.7
1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3
1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8
2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 1.9 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.1 2.1 2.1 2.0 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.7 2.7 2.7 2.5
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.3 2.2 2.2 2.2 2.1 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.9 2.9 2.9 2.8 2.8 2.8 2.7 2.5
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.4 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.8
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.8 2.8 2.6
1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.3 1.2 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.7 1.6 1.5
2.8 2.8 2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.0 3.6 3.6 3.5 3.5 3.5 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 2.9 2.9 2.6
1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.5 1.5 1.5 1.5 1.4 1.4 1.4 1.4 1.4 1.3 1.3 1.2 2.1 2.1 2.1 2.0 2.0 2.0 2.0 2.0 1.9 1.9 1.9 1.8 1.8 1.8 1.8 1.7 1.7 1.7 1.5
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9
2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.2
2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.6 2.5
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.5 3.5 3.4 3.2
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.4
3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.5 3.3
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.3
4.3 4.3 4.3 4.3 4.3 4.2 4.2 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.8 3.7 3.6 3.6 3.3
2.6 2.6 2.6 2.6 2.6 2.5 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.3 2.2 2.2 2.1 2.0
4.6 4.6 4.5 4.5 4.4 4.4 4.4 4.3 4.2 4.2 4.1 4.1 4.0 3.9 3.9 3.8 3.7 3.7 3.3
2.8 2.7 2.7 2.7 2.7 2.6 2.6 2.6 2.5 2.5 2.5 2.4 2.4 2.4 2.3 2.3 2.2 2.2 2.0
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
Floor Standing
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
11-10
Floor Standing
2.2
Cooling capacity
Floor Standing
Cooling capacity
Capacity Index
4.5
5.6
7.1
20 14 TC SHC kW kW
23 16 TC SHC kW kW
Indoor air temp. (DB/WB, 째C) 26 27 28 18 19 20 TC SHC TC SHC TC SHC kW kW kW kW kW kW
30 22 TC SHC kW kW
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46 10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 2.7 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3
3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5
3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6
4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.1 4.0 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 4.9
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.1 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.7
4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.3 4.3 4.0 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.6 5.5 5.5 5.4 5.3 5.0
3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.2 3.2 3.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.9 3.9 3.8 3.8 3.6
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.1 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 5.9 5.8 5.8 5.7 5.6 5.5 5.4 5.1
3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 2.9 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.5
5.4 5.4 5.4 5.4 5.3 5.3 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.7 4.5 4.5 4.1 6.7 6.7 6.7 6.7 6.6 6.5 6.5 6.5 6.4 6.3 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.6 5.1
3.2 3.2 3.2 3.2 3.2 3.2 3.1 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.8 2.8 2.7 2.7 2.5 3.9 3.9 3.9 3.8 3.8 3.8 3.8 3.7 3.7 3.6 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.2 3.0
5.8 5.7 5.7 5.6 5.6 5.5 5.5 5.4 5.3 5.2 5.2 5.1 5.0 4.9 4.8 4.8 4.7 4.6 4.2 7.2 7.1 7.1 7.0 6.9 6.8 6.8 6.7 6.6 6.5 6.4 6.3 6.2 6.1 6.0 5.9 5.8 5.7 5.2
3.5 3.4 3.4 3.4 3.3 3.3 3.3 3.2 3.2 3.1 3.1 3.0 3.0 3.0 2.9 2.9 2.8 2.7 2.5 4.1 4.1 4.1 4.0 4.0 3.9 3.9 3.9 3.8 3.7 3.7 3.6 3.6 3.5 3.5 3.4 3.3 3.3 3.0
10 12 14 16 18 20 21 23 25 27 29 31 33 35 37 39 42 44 46
4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8
4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1 4.1
5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7 5.7
4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6 4.6
6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.6 6.5 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.7
7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.1 7.0 6.9 6.8 6.7 6.3
5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 4.9 4.8 4.8 4.5
7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.6 7.5 7.5 7.4 7.3 7.2 7.1 7.0 6.9 6.5
5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.2 5.1 5.1 5.0 5.0 4.9 4.8 4.7 4.4
8.5 8.5 8.5 8.5 8.4 8.3 8.3 8.2 8.1 8.0 7.9 7.8 7.7 7.6 7.5 7.4 7.2 7.1 6.5
4.9 4.9 4.9 4.9 4.8 4.8 4.8 4.7 4.7 4.6 4.6 4.5 4.4 4.4 4.3 4.2 4.1 4.1 3.8
9.1 9.0 8.9 8.8 8.8 8.7 8.6 8.5 8.4 8.3 8.1 8.0 7.9 7.8 7.6 7.5 7.3 7.2 6.6
5.2 5.2 5.1 5.1 5.0 5.0 5.0 4.9 4.8 4.8 4.7 4.6 4.5 4.5 4.4 4.3 4.2 4.2 3.8
Outdoor air temp. (DB, 째C)
Notes: TC: Total Capacity(kW)
11-11
32 24 TC SHC kW kW
SHC: Sensible Heat Capacity(kW)
Floor Standing
6.2 Heating Capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
Heating capacity Indoor air temp. (DB, 째C)
16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
2.2
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.8 2.8 2.9 2.9 2.9 2.9 2.9
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.3 2.4 2.5 2.6 2.7 2.7 2.7 2.7 2.7 2.7 2.7
1.7 1.7 1.8 1.7 1.8 1.9 1.9 2.0 2.0 2.1 2.2 2.3 2.4 2.5 2.5 2.5 2.5 2.5 2.5
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.2 2.2 2.2 2.3 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4
1.7 1.7 1.8 1.9 2.0 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
2.8
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.1 2.2 2.3 2.5 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.6 3.6 3.7 3.7 3.7 3.7 3.7
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.9 3.0 3.2 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4
2.1 2.2 2.3 2.2 2.3 2.4 2.5 2.5 2.6 2.7 2.8 3.0 3.1 3.2 3.2 3.2 3.2 3.2 3.2
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1 3.1
2.1 2.2 2.3 2.4 2.6 2.7 2.8 2.8 2.8 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0
2.1 2.2 2.3 2.4 2.6 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8 2.8
3.6
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
2.7 2.8 2.9 3.1 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.4 4.5 4.6 4.6 4.6 4.6 4.6
2.7 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.8 4.0 4.2 4.3 4.3 4.3 4.3 4.3 4.3 4.3
2.7 2.8 2.9 2.7 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.7 3.9 4.0 4.0 4.0 4.0 4.0 4.0
2.6 2.8 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9 3.9
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.5 3.6 3.7 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8
2.6 2.7 2.9 3.0 3.2 3.4 3.4 3.4 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Notes: TC: Total Capacity(kW) Capacity
Floor Standing
11-12
Floor Standing
kW -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
Floor Standing
Heating capacity Outdoor air temp. Capacity Index DB(째C) WB(째C)
4.5
5.6
7.1
-19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0 -19.8 -18.8 -16.7 -14.7 -12.6 -10.5 -9.5 -8.5 -7.0 -5.0 -3.0 0.0 3.0 5.0 7.0 9.0 11.0 13.0 15.0
-20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7 -20.0 -19.0 -17.0 -15.0 -13.0 -11.0 -10.0 -9.1 -7.6 -5.6 -3.7 -0.7 2.2 4.1 6.0 7.9 9.8 11.8 13.7
Indoor air temp. (DB, 째C) 16.0
18.0
20.0
21.0
22.0
24.0
TC
TC
TC
TC
TC
TC
kW
kW
kW
kW
kW
kW
3.4 3.5 3.7 3.9 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.6 5.6 5.8 5.8 5.8 5.8 5.8 4.2 4.3 4.6 4.9 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 7.0 7.1 7.2 7.2 7.2 7.2 7.2 5.4 5.5 5.8 6.2 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.9 9.0 9.2 9.2 9.2 9.2 9.2
3.4 3.5 3.7 3.8 4.1 4.3 4.3 4.4 4.6 4.8 5.0 5.3 5.4 5.4 5.4 5.4 5.4 5.4 5.4 4.2 4.3 4.6 4.8 5.1 5.4 5.4 5.5 5.7 6.0 6.2 6.6 6.7 6.7 6.7 6.7 6.7 6.7 6.7 5.4 5.5 5.8 6.1 6.5 6.8 6.9 7.0 7.3 7.6 7.9 8.4 8.6 8.6 8.6 8.6 8.6 8.6 8.6
3.4 3.5 3.7 3.4 3.6 3.8 3.9 4.0 4.1 4.3 4.4 4.6 4.9 5.0 5.0 5.0 5.0 5.0 5.0 4.2 4.3 4.6 4.3 4.5 4.8 4.9 5.0 5.1 5.4 5.5 5.8 6.2 6.3 6.3 6.3 6.3 6.3 6.3 5.4 5.5 5.8 5.5 5.8 6.0 6.2 6.3 6.5 6.8 7.0 7.4 7.8 8.0 8.0 8.0 8.0 8.0 8.0
3.3 3.5 3.7 3.8 4.0 4.3 4.3 4.4 4.4 4.6 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.2 4.3 4.6 4.8 5.0 5.4 5.4 5.5 5.6 5.8 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 6.1 5.3 5.5 5.8 6.1 6.4 6.8 6.9 7.0 7.1 7.4 7.7 7.8 7.8 7.8 7.8 7.8 7.8 7.8 7.8
3.3 3.4 3.7 3.8 4.0 4.2 4.3 4.4 4.4 4.6 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.2 4.3 4.6 4.8 5.0 5.3 5.4 5.5 5.6 5.8 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.9 5.3 5.4 5.8 6.1 6.4 6.7 6.9 7.0 7.1 7.4 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5
3.3 3.4 3.6 3.8 4.0 4.2 4.3 4.3 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.4 4.2 4.3 4.5 4.8 5.0 5.3 5.4 5.4 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.3 5.4 5.8 6.1 6.4 6.7 6.8 6.8 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0
Notes: TC: Total Capacity(kW)
11-13
Floor Standing
7. Air velocity and Temperature Distribution(Reference Data) ARNU24GCFA2- Installation on floor or wall Cooling
Heating
Discharge angle:45°
Discharge angle:60°
Air velocity [m/s]
Air velocity [m/s] • 2.7m
• 2.7m 0.5 0.75
0.75
• 2m
• 2m
1.0
1.0
• 1m
• 1m
• 8m
• 7m
• 6m
• 5m
• 4m
• 3m
• 2m
•• 0m 0m
• 1m
• 8m
• 7m
• 6m
• 5m
• 4m
• 3m
• 2m
•• 0m 0m
• 1m
Temperature [°C]
Temperature [°C]
• 2.7m
• 2.7m 24
29 30
• 2m 25 23
• 8m
• 7m
• 6m
Floor Standing
• 5m
• 4m
• 3m
• 2m
• 1m
• 2m
28 • 1m
•• 0m 0m
31
• 8m
• 7m
• 6m
• 5m
• 4m
• 3m
• 2m
• 1m
• 1m
•• 0m 0m
11-14
Floor Standing
1.25
1.25
8. Electric Characteristics Units Floor Standing
Model ARNU07GCEA2 ARNU07GCEU2 ARNU09GCEA2 ARNU09GCEU2 ARNU12GCEA2 ARNU12GCEU2 ARNU15GCEA2 ARNU15GCEU2 ARNU18GCFA2 ARNU18GCFU2 ARNU24GCFA2 ARNU24GCFU2 ARNU07GCEA2 ARNU07GCEU2 ARNU09GCEA2 ARNU09GCEU2 ARNU12GCEA2 ARNU12GCEU2 ARNU15GCEA2 ARNU15GCEU2 ARNU18GCFA2 ARNU18GCFU2 ARNU24GCFA2 ARNU24GCFU2
Type
Power Supply Hz
Volts Voltage Range MCA
CE CE CE
MAX.264 50
220~240
60
220
MIN.198
CE CF CF CE CE CE
MAX.242 MIN.198
CE CF CF
1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.55 1.55 1.55 1.55 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.22 1.55 1.55 1.55 1.55
IFM
Input(W)
MFA
kW
FLA
15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
0.028 0.028 0.028 0.028 0.028 0.028 0.028 0.028 0.076 0.076 0.076 0.076 0.028 0.028 0.028 0.028 0.028 0.028 0.028 0.028 0.076 0.076 0.076 0.076
0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.44 0.44 0.44 0.44 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.17 0.44 0.44 0.44 0.44
Cooling Heating 30 30 30 30 30 30 30 30 80 80 80 80 30 30 30 30 30 30 30 30 80 80 80 80
30 30 30 30 30 30 30 30 80 80 80 80 30 30 30 30 30 30 30 30 80 80 80 80
Symbols: MCA: Minimum Circuit Amperes (A) MFA : Maximum Fuse Amperes( see note 5) kW : Fan Motor Rated Output(kW) FLA : Full Load Amperes(A) IFM : Indoor Fan Motor Note : 1. Voltage Range Units are suitable for use on electrical system where voltage supplied to unit terminals is not below or above the listed range limits. 2. Maximum allowable voltage unbalance between phase is 2%. 3. MCA/MFA MCA = 1.25 x FLA MFA â&#x2030;¤ 4 x FLA ( Next lower standard fuse rating. Minimum 15A) 4. Select wire size based on the MCA. 5. Instead of fuse, use Circuit Breaker.
11-15
Floor Standing
9. Sound Levels Overall Notes: - Sound measured at 1.5m away from the center of the unit. - Data is valid at free field condition - Data is valid at nominal operating condition - Reference accoustic pressure OdB = 20µPa - Sound level will vary depending on a range of factors such as the construction(acoustic absorption coefficient) of particular room in which the equipment is installed.
Microphone
With Case
1.5m
E
Du
1.5m
ARNU07GCEA2 ARNU09GCEA2 ARNU12GCEA2 ARNU15GCEA2 ARNU18GCFA2 ARNU24GCFA2
ARNU07GCEU2 ARNU09GCEU2 ARNU12GCEU2 ARNU15GCEU2 ARNU18GCFU2 ARNU24GCFU2
Floor Standing
Model
(Fie
Sound Levels dB(A) H L M 35 33 31 36 34 32 37 35 33 38 37 35 40 37 34 43 40 37
Sound Pressure Level ARNU07GCEA2 ARNU07GCEU2
ARNU09GCEA2 ARNU09GCEU2 70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 NC-25
20
10
Approximate Hearing Threshold 63
250
500
70
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20
125
NC-15 1000 2000 4000 8000
10
63
NC-60
250
500
NC-50
NC-40
NC-30
NC-15 1000 2000 4000 8000
10
NC-65 NC-60 NC-55 NC-50 NC-45 NC-40 NC-35 NC-30
10
NC-25
63
NC-60
125
250
500
Octave Band Center Frequency (Hz)
Floor Standing
NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20 NC-15 1000 2000 4000 8000
NC-65
60
10
NC-25 Approximate Hearing Threshold 63
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
70
Approximate Hearing Threshold
125
250
500
1000
2000
4000
500
1000 2000
NC-15 4000 8000
NC-15 8000
Octave Band Center Frequency (Hz)
NC-65
60
NC-60 NC-55
50
NC-50 NC-45
40
NC-40 NC-35
30
NC-30 20
NC-20
125
250
ARNU24GCFA2 ARNU24GCFU2
ARNU18GCFA2 ARNU18GCFU2
70
20
NC-20
Octave Band Center Frequency (Hz)
80
30
NC-25 Approximate Hearing Threshold 63
80
40
NC-35
30
80
50
NC-45
40
Octave Band Center Frequency (Hz)
ARNU15GCEA2 ARNU15GCEU2
60
NC-55
50
NC-20
125
NC-65
60
20
NC-25 Approximate Hearing Threshold
Octave Band Center Frequency (Hz)
Octave Band Sound Pressure Level (dB re 20µPa )
80
Octave Band Sound Pressure Level (dB re 20µPa )
70
Octave Band Sound Pressure Level (dB re 20µPa )
80
Octave Band Sound Pressure Level (dB re 20µPa )
80
ARNU12GCEA2 ARNU12GCEU2
10
NC-25 Approximate Hearing Threshold 63
NC-20
125
250
500
1000
2000
4000
NC-15 8000
Octave Band Center Frequency (Hz)
11-16
Floor Standing
10. Installation • Please read this instruction sheet completely before installing the product. • When the power cord is damaged, replacement work shall be performed by authorized personnel only. • Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
10.1 Features
[CEA/CFA Type]
Control panel
Air Outlet Remote Controller Control panel TEMP
Remote Controller
Air Filter Air Inlet
[CEU/CFU Type]
Air Inlet Air filter (At Air Inlet)
11-17
Floor Standing
10.2 Selection of the best location Indoor unit Install the air conditioner in the location that satisfies the following conditions. • The place shall easily bear a load exceeding four times the indoor unit’s weight. Floor Standing
• Sufficient space should be available to inspect the unit as in the figure shown on the right.
Window
• The place where the unit is installed shall be leveled. • The place shall be suitable for easy connection of the indoor unit with the outdoor unit. • The place where the unit is installed should not be affected by electrical noise. • The place where air circulation in the room will be good . • There should not be any heat source or steam near the unit Select an installation site where the following conditions are satisfied and that meets your customer's approval. • Where the floor is strong enough to bear the indoor unit weight. • Where the floor is not significantly inclined. • Where nothing blocks the air passage. • Where condensate can be properly drained.
20 or more
Service space
Air flow direction Front side
100 or more
175 or more
100 or more
1000 or more
Air inlet direction
• Where sufficient clearance for installation and maintenance can be ensured.
Base
• Where there is no possibility of flammable gas leakage. • Where optimum air distribution can be ensured. • Where piping between indoor and outdoor units is possible within the allowable limit (Refer to the installation manual of the outdoor unit.) 80 or more
654
• Keep the indoor and outdoor unit, power cable and transmission wiring, at least 1m from TVs and radios, to prevent distorted pictures and static.(Depending on the type and source of the electrical waves, static may be heard even when more than 1 m away.)
Window
Ma
(Unit: mm) Type
A
B
CEU Type
788
1080
CFU Type
1066
1358
Floor Standing
inte
nan
ce
are
a
Ao
[IMPORTANT] Leave sufficient clearance for air inlet and maintenance.
rm ore Bo rm ore
11-18
A
• Positioning of holes for fastening to the wall
Type
A
CEA, CEU CFA, CFU
858 1136
1. Use the installationmount for installation. Check whether the wall is strong enough to bear the weight of the unit or not. if there is a risk, reinforce the wall before installing the unit. 2. The unit requires a minimum 100 mm clearance below the unit for air intake. Also, ensure the unit is leveled when installed so that drainage flows smoothly. If inclined, water can leak. 3. Depending upon the shape and nature of the wall surface, operating sound may become bigger.
198
(Unit:mm)
270
Floor Standing
Bolt pitch
How to open/close front panel
(1)
• How to open/close the front panel (2)
(1) Open the lid of control panel(Both left and right) (2) Remove screws(Both left and right) (3) Lift the front panel of the unit • To close, perform the procedure in opposite order.
11-19
(2) (3)
(1)
Floor Standing
10.3 Drain piping work • Drain piping must have downward slope(1/50 to 1/100): be sure not to provide up-and-down slope to prevent reverse flow. • During drain piping connection, be careful not to exert extra force on the drain port on the indoor unit. • The outside diameter of the drain connection to the indoor unit is 21mm. Floor Standing
Piping material: Polyvinyl chloride pipe 25mm and pipe fittings • Be sure to install heat insulation on the drain piping Heat insulation material: Polyethylene foam with thickness more than 10 mm. • If converging multiple drain pipes, install according to the procedure shown below.
Slope downwards at a gradient of at least 1/100 • After piping work is finished, check for drainage. • Be sure to insulate all indoor units.
10.4 How to connect wirings Remove the electric parts Box cover and connect the wiring
Fasten with clamp
Fasten with accessory clamp
Floor Standing
Power Supply wiring ground wiring (Field wiring)
Power supply wiring ground wiring Transmission wiring (Field wiring)
Transmission wiring
11-20
Floor Standing
10.5 Wiring Connection Connect the wires to the terminals on the control board individually according to the outdoor unit connection. â&#x20AC;˘ Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively. Terminal Block Indoor 1(L)
2(N)
3
SODU
4
B
A
INTERNET DRY1 DRY2 GND 12V
IDU -
-
B
A
-
-
-
-
Outdoor Unit
INDOOR POWER INPUT
WARNING : Make sure that the screws of the terminal are free from looseness. CAUTION: After the confirmation of the above conditions, prepare the wiring as follows: 1) Never fail to have a separate power circuit specifically for the air conditioner. As for the method of wiring, follow the circuit diagram posted on the inside of control cover. 2) The screw which fasten the wiring in the casing of electrical fittings are liable to come loose from vibrations to which the unit is subjected during the course of transportation. Check them and make sure that they are all tightly fastened. (If they are loose, it could cause burn-out of the wires.) 3) Specification of power source. 4) Confirm that electrical capacity is sufficient. 5) See to that the starting voltage is maintained at more than 90 percent of the rated voltage marked on the name plate. 6) Confirm that the cable thickness is as specified in the power source specification. (Particularly note the relation between cable length and thickness.) 7) In a wet or moist area, always install an earth leakage circuit breaker. 8) The following would be caused by voltage drop. â&#x20AC;˘ Vibration of a magnetic switch, which will damage the contact point, fuse breaking, disturbance of the normal function of the overload. 9) The means for disconnection from a power supply shall be incorporated in the fixed wiring and have an air gap contact separation of at least 3mm in each active(phase) conductor.
11-21
Floor Standing
WIRED REMOTE CONTROLLER INSTALLATION â&#x20AC;˘ Since the room temperature sensor is in the remote controller, the remote controller box should be installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by: Floor Standing
- Drafts, or dead spots behind doors and in corners. - Hot or cold air from ducts. - Radiant heat from sun or appliances. - Concealed pipes and chimneys. - Uncontrolled areas such as an outside wall behind the remote controller. - This remote controller is equipped with a seven segment LED. display. For proper display of the remote controller LED's, the remote controller should be installed properly as shown in Fig.1. (The standard height is 1.2~1.5 m from floor level.)
TEMP
yes
Remote Controller
no
TEMP
Controller Remote
TEMP
Remote Controller
5feet (1.5meters)
no
no
Fig.1 Typical locations for remote controller
Floor Standing
11-22
11. Accessories
Floor Standing
Standard Accessories Name
Dran hose
Level adjustment screw
Insulation for fitting
Clamp (Tie Wrap)
Quantity
1 EA
4
1 each.
8 pcs.
(1) For gas pipe Shape
[Other]
• Operation manual • Installation manual
(2) For liquid pipe
CAUTION • Use only those accessories (Standard or optional) which have designated specifications.
11-23
Floor Standing
P/No.: MFL42059206
Air Conditioner 20 Yeouido-dong, Yeongdeungpo-gu, Yeouido P.O.Box 335 Seoul, 150-721, Korea. http://www.lgeaircon.com
All rights reserved Printed in Korea April/2009 The specifications, designs, and information in this brochure are subject to change without notice.
File No. : A8974 Volume:1
Certificate No. : E00626/1
The air conditioners manufactured by LG have received ISO9001 certificate for quality assurance and ISO14001 certificate for environmental management system.