To reduce the risk of injury, the user must read and understand this manual before using this product.
För att minska risken för skada måste användaren läsa och förstå denna bruksanvisning innan den här produkten används.
Thankyou!
Thankyouforchoosingthisproduct.
Thank you!
Savethismanualforfuturereference.
Safetyinstructions
Forsafetyreasons,pleasereadtheseoperatinginstructionscarefullybeforeusingyourappliance.The deviceisintendedexclusivelyforprofessionaluseby qualifiedpersonnel. Personswhoare notfamiliar with thisdeviceshouldnotuseit.
Safety instructions
Säkerhets instruktioner
For safety reasons, please read these operating instructions carefully before using your appliance. The device is intended exclusively for professional use by qualified personnel. Persons who are not familiar with this device should not use it.
Checkthemainswiththeratingplate.
Av säkerhetsskäl, läs denna bruksanvisning noggrant innan du använder din apparat. Enheten är endast avsedd för professionell användning av kvalificerad personal. Personer som inte är bekanta med den här enheten bör inte använda den.
For more than 50 years, we have specialised in both air treatment and the production and development of dehumidifiers and mobile air conditioners. Our quality products are manufactured according to the latest technological developments and are specially designed to achieve a clean, better and more pleasant indoor climate.
I mer än 50 år har vi specialiserat oss på både luftbehandling, samt produktion och utveckling av avfuktare och mobila luftkonditioneringsapparater.
Våra kvalitetsprodukter tillverkas enligt den senaste tekniska utvecklingen och är specialdesignade för att uppnå ett renare, bättre och bekvämare inomhusklimat.
To ensure that you get the most out of all the possibilities, we recommend that you read these operating instructions carefully. Keep the instructions in a safe place within easy reach, so that you can refer to them again at a later date if necessary.
För att säkerställa att du får ut det mesta av alla tillval rekommenderar vi att du läser bruksanvisningen noggrant.
Förvara instruktionerna på en säker plats inom räckhåll så att du kan hänvisa till dem igen vid ett senare tillfälle.
UK
EU
Tack!
Humid air is drawn into the device by a rotating fan. After passing through the filter, which stops dust particles, the air is cooled by a cooling coil.
Fuktig luft sugs in i enheten av en roterande fläkt.
Efter att ha passerat genom filtret, som stoppar dammpartiklar, kyls luften av en kylslinga.
The water vapour in the air condenses into water, which is discharged via a discharge hose.
Vattenångan i luften kondenseras till vatten som släpps ut via en utloppsslang.
The drier air is then heated by a heat exchanger and blown back into the room by the fan.
Humid air is drawn into the device by a rotating fan. After passing through the filter, which stops dust particles, the air is cooled by a cooling coil. The water vapour in the air condenses into water, which is discharged via a discharge hose. The drier air is then heated by a heat exchanger and blown back into the room by the fan.
Den torra luften värms sedan upp av en värmeväxlare och blåses tillbaka in i rummet av fläkten.
Beskrivning av delar
always unplug it from the wall socket.
• Keep children out of reach of the device.
• Maintenance and repairs should only be carried out by certified personnel.
GENERAL AND SAFETY (1)
Otherwise the warranty will become void.
- Only install the device in an area that corresponds to its IP rating.
• This dehumidifier is a safe device (CE). However, as with any electrical appliance, care should be taken.
Installationen måste vara i full överensstämmelse med lokala föreskrifter, föreskrifter och standarder. Observera att avfuktaren måste ha stått upprätt i minst en timme före användning.
NEVER connect the unit using an extension cord. If a suitable earthed socket is not available, have this installed by a certified professional.
• Koppla alltid bort strömförsörjningen innan du rengör enheten eller någon del av den.
The installation must be in full accordance with the local regulations, provisions and standards.
Please note that the dehumidifier must have stood upright for at least one hour before use.
• När du inte använder avfuktaren, dra alltid ut kontakten ur uttaget.
• Håll barn utom räckhåll för enheten.
• When you are not using the dehumidifier, always unplug it from the wall socket.
• Keep children out of reach of the device.
• Underhåll och reparationer bör endast utföras av certifierad personal. Annars upphör garantin.
- Always disconnect the power supply before cleaning the unit or any part of it.
• Rengör aldrig avfuktaren genom att spraya den med vatten eller sänka ner den i vatten.
The plug must always be easily accessible when the appliance is connected.
- Never clean the dehumidifier by spraying it with water or immersing it in water.
• Täck inte över eller för in något i öppningarna på avfuktaren.
• Maintenance and repairs should only be carried out by certified personnel. Otherwise the warranty will become void.
The environmentally friendly R290 refrigerant is in a closed circuit; it is highly flammable. Please observe the following:! No open flames or sources of heat in the vicinity of the appliance in the same room. Do not open the closed refrigeration circuit. Only qualified personnel, trained, certified and accustomed to using flammable refrigerants may carry out maintenance work.
• Denna avfuktare är en säker enhet (CE). Men som med alla elektriska apparater måste man vara försiktig.
See warning next page.
• This dehumidifier is a safe device (CE). However, as with any electrical appliance, care should be taken.
Det miljövänliga köldmediet R290 är i en sluten krets; det är mycket brandfarligt. Observera följande: Inga öppna lågor eller värmekällor nära apparaten i samma rum. Öppna inte den slutna kylkretsen. Endast kvalificerad personal, utbildad, certifierad och van vid att använda brandfarliga köldmedier, får utföra underhållsarbeten. Se varning nästa sida.
The environmentally friendly R290 refrigerant is in a closed circuit; it is highly flammable. Please observe the following:! No open flames or sources of heat in the vicinity of the appliance in the same room. Do not open the closed refrigeration circuit.
Only qualified personnel, trained, certified and accustomed to using flammable refrigerants may carry out maintenance work. See warning next page.
- Do not cover or insert anything into the openings of the dehumidifier.
• Installera endast enheten i ett område som matchar dess IP-klassificering.
Important: The appliance MUST always be connected to earth. If the power supply is not earthed, do not connect the device at all.
- Only install the device in an area that corresponds to its IP rating.
Anslut ALDRIG enheten med en förlängningssladd.
Om ett lämpligt jordat uttag inte finns tillgängligt måste det installeras av en kvalificerad fackman.
NEVER connect the unit using an extension cord. If a suitable earthed socket is not available, have this installed by a certified professional.
Warning! Never use the appliance if the cord or plug is damaged. If the cord is damaged, have it replaced by an authorised professional to avoid danger and accidents.
Kontakten måste alltid vara lättillgänglig när apparaten är ansluten.
The plug must always be easily accessible when the appliance is connected.
Important: The appliance MUST always be connected to earth. If the power supply is not earthed, do not connect the device at all.
Warning! Never use the appliance if the cord or plug is damaged. If the cord is damaged, have it replaced by an authorised professional to avoid danger and accidents.
Viktigt: Apparaten MÅSTE alltid vara ansluten till jord. Om strömförsörjningen inte är jordad, anslut inte enheten alls. Varning! Använd aldrig apparaten om sladden eller kontakten är skadad. Om sladden är skadad måste den bytas ut av en auktoriserad fackman för att undvika faror och olyckor.
GENERALANDSAFETY(2)
VARNING FÖR R290 KYLDMEDEL!
WARNINGFORR290REFRIGERANT!
Köldmediet R290 är en brandfarlig naturgas och får endast användas av certifierad personal.
ANVÄND ALDRIG AVFUKTAREN:
NEVERUSETHEDEHUMIDIFIER
• nära öppen eld (som en cigarett, ljus, etc.) eller en värmekälla (spis, varm lampa).
Läckande köldmedium kan orsaka brand och explosion, arbeta därför ALDRIG på enheten själv! Förvara, installera och använd avfuktaren i rum med minst 10 m2 golvyta.
Om en gasläcka misstänks, låt en auktoriserad servicetekniker kontrollera den. Håll dig borta från enheten. Evakuera området.
Before start-up
Innan uppstart
PLATS
Location
För bästa resultat, kör din avfuktare i ett slutet utrymme. Stäng dörrar och fönster. Placera enheten mot en vägg, fri från hinder och fri från alla hinder för luftflödet (inlopp och utlopp).
For best results, run your dehumidifier in a closed space. Close doors and windows. Place the unit by a wall, free of obstacles and free of anything that obstructs the airflow (inlet and outlet).
POSITION
Position
Lämna alltid enheten upprätt i minst en timme efter transport. Olja från kompressorn kan sedan rinna tillbaka in i kompressorn från kylslingorna. Apparaten måste stå upprätt på en plan yta.
Always leave the device upright for at least one hour after transport. Oil from the compressor can then flow back into the compressor from the cooling coils. The device must be upright and level.
Avloppsslang
3,5 meter maximal avloppshöjd
Utloppsslanganslutning
Discharge hose connection
Din avfuktare levereras med en avloppsslang. Slangen kan fästas på enheten med en snabbkoppling. Rulla ut avloppsslangen och placera änden i ett handfat, avlopp, hink eller utanför området som ska avfuktas där vattnet kan rinna av. Om du använder en hink, töm hinken regelbundet så att den inte svämmar över.
Your dehumidifier comes with a drainage hose. The hose can be attached to the unit with a quick connector. Unwind the drainage hose and place the end into a sink, drain, bucket or outside the area to be dehumidified where the water can drain away. If using a bucket, empty the bucket regularly so that it does not overflow.
OBS! Rulla alltid ut avloppsslangen helt. Placera aldrig änden högre än 3,5 meter. Kontrollera slangen för sprickor och hinder så att kondensvattnet inte blockeras i sitt flöde.
Detta förhindrar läckage från pumpen.
NB. Always roll out the drainage hose completely. Never place the end higher than 3.5 metres. Check the hose for kinks and obstacles, so that the condensation water is not obstructed in its flow. This prevents leakage from the pump.
Snabbanslutning
Tryck för att montera/släppa
INSTALLATION (2)
INSTALLATION
(2)
Installation of additional hose / dry air outlet
Installation av extra kanalpåse / torrluftsutlopp
En extern slang kan som tillval monteras på utloppsgallret.
Detta kan vara användbart för vissa torkningskrav.
An external hose can be optionally mounted on the discharge grille. This can be useful for certain drying requirements.
1) Lossa de fyra skruvarna i luftutloppskanalen.
1) loosen the four screws of the air outlet channel
2) Montera adaptern på gallret med de fyra skruvarna.
2) replace the adapter turned
3) Fäst kanalpåsen på adaptern.
3) attach the hose to the adapter
Montering av kanalpåseadapter
En extern slang kan som tillval monteras på utloppsgallret.
Straps can be used to easily secure the power cord and drain hose.
Remmar kan användas för att enkelt fästa nätsladden och avloppsslangen.
Control panel
Kontrollpanel
Menu - Display screen - On/off button
MENU-knapp
Menu selection / Up - Pump button
SKÄRMDISPLAY
PÅ / AV-knapp
Main Menu - Display
MENYVAL / UPP-knapp
Insert plug into earthed socket
PUMP-knapp
When the unit is connected, it starts the diagnostic procedure.
HUVUDMENY - DISPLAY
Anslut ett jordat eluttag.
The display shows “self diagnosis”. When the unit is ready, the display shows “stand by”.
När enheten är ansluten startar den diagnostikproceduren.
Displayen visar "SELF DIAGNOSIS".
När enheten är klar visar displayen "STANDBY".
Switching the unit on/off
Slå på eller av enheten.
Tryck på PÅ / AV-knappen.
Press the “on/off” button. The unit starts up, the display shows “unit on”.
Enheten startar, displayen visar "UNIT ON" (enhet på).
Operating time 00:00, set value (00%), current temperature 00 oC and current humidity 00%.
Drifttid 00:00, inställt värde (00%), aktuell temperatur 00 oC och aktuell luftfuktighet 00%.
/ Av-knapp
MENUVAL / UPP-knapp
PUMP-knapp
If the display reads PLEASE WAIT COMP DELAY and performs a numeral count down from a maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes the compressor delay protection, the unit will start working immediately.
If the display reads PLEASE WAIT COMP DELAY and performs a numeral count down from a maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes the compressor delay protection, the unit will start working immediately.
Om displayen visar "PLEASE WAIT COMP DELAY" och utför en numerisk nedräkning från maximalt 180 sekunder till 0, är detta kompressor-fördröjnings-skyddet.
När enheten har slutfört kompressor-fördröjnings-skyddet börjar enheten arbeta omedelbart.
Purge
Purge
Utpumpning
Press the purge button, the unit will pump for 50 seconds to manually empty water from the condensate pump reservoir.
Press the purge button, the unit will pump for 50 seconds to manually empty water from the condensate pump reservoir.
Tryck på PUMP-knappen, enheten kommer att pumpa i 50 sek. för att manuellt dränera vatten från kondensatpumpens behållare.
Under normal drift, pumpa ut i 90 sekunder när tanken är full.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will flash P in top right corner.
Ett P blinkar i det övre högra hörnet av displayen.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will flash P in top right corner.
Obs: Tryck alltid på PUMP-knappen innan du flyttar enheten.
Notice: Always press the PURGE button prior to move the unit.
Notice: Always press the PURGE button prior to move the unit.
Display Menu
Display Menu
Meny
Tryck på MENU-knappen för att bläddra igenom ytterligare avfuktare och användarinställningar på displayen.
Press the DISPLAY MENU button cycle through the display of additional dehumidifier conditions and User Setting. To return to the Main Menu, wait for 10 seconds no operation or keep pressing DISPLAY MENU button till it back to the Main Menu.
För att återgå till huvudmenyn, vänta i 10 sekunder eller fortsätt att trycka på knappen MENY tills du kommer tillbaka.
Press the DISPLAY MENU button cycle through the display of additional dehumidifier conditions and User Setting. To return to the Main Menu, wait for 10 seconds no operation or keep pressing DISPLAY MENU button till it back to the Main Menu.
Tryck på MENYVAL-knappen för att ändra/kontrollera värdet på "User Setting Menu Display". MENYVAL-knappen fungerar som UPPknappen för att justera det inställda värdet för drift med hygrostat.
Användaren kan använda knapparna MENY och MENYVAL för att styra och ställa in vissa funktioner.
Pilen som visas i det övre vänstra hörnet betyder att du kan justera parametern eller så är skärmen nu låst. Tryck på MENY-knappen för att lämna det låsta gränssnittet.
JOB HOURS
Jobhours
Jobhours
Visar det totala antalet drifttimmar för en specifik uppgift.
PressMENUSELECTIONtoresettheworkinghourstozero.
PressMENUSELECTIONtoresettheworkinghourstozero.
Tryck på MENYVAL för att återställa drifttiden efter att jobbet är klart.
LIFE HOURS
Lifehours
Lifehours
Visar det totala antalet drifttimmar. Värdet kan inte ändras.
Showstotalofunithours.Thisvaluecannotbemodified.
Showstotalofunithours.Thisvaluecannotbemodified.
Temperatur för inlopp (Inlet) / utlopp (Outlet)
TemperatureofInlet /Outlet
TemperatureofInlet /Outlet
Visar aktuell temperatur och relativ fuktighet för inlopp och utlopp. utlopp
Tryck på MENYVAL-knappen och ställ in "HUMIDISTAT MODE" till "ON" för att justera det inställda hygrostatvärdet från
Humidistat Mode
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
CO-35-40-45-50-55-60-65-70-75-80-85-90 %.
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Välj önskat värde och vänta i 5 sekunder – inställningen behålls. CO betyder kontinuerlig avfuktning.
Temp Units
Temp Units
TEMP UNITS
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Temp Units
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Visar aktuell temperaturskala. Tryck på MENYVAL för att ställa in Fahrenheit- eller Celsius-skalan.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Temp Units
Coil Temp
COIL TEMP
Coil Temp
Coil Temp
Shows the evaporator coil temperature.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the evaporator coil temperature.
Visar kylslingans temperatur.
Shows the evaporator coil temperature.
Comprss Current
Coil Temp
Comprss Current
COMPRSS CURRENT
Comprss Current
Shows the evaporator coil temperature.
Shows the current draw in amps.
Shows the current draw in amps.
Visar aktuell förbrukning i ampere.
If the unit can not detect the compressor current, the display shows - - A.
Shows the current draw in amps. If the unit can not detect the compressor current, the display shows - - A.
If the unit can not detect the compressor current, the display shows - - A.
Comprss Current
ENERGY METER
Shows the current draw in amps.
Code Message
Code Message
Code Message
If the unit can not detect the compressor current, the display shows - - A.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
Displayen visar det totala antalet timmars användning i kWh. Det visade värdet kan inte justeras. Registrera kWh-förbrukningen före och efter varje jobb.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
Code Message
CODE MESSAGE
Om enhetens inbyggda diagnostik upptäcker ett problem visar enheten en felkod. Se felkoder på nästa sida.
12
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page. 12
Felkod Förklaring
E1 Temperatursensorfel
E2 Fel på inloppssensorn
E3 Kylsystemfel
E4 Pumpfel
E5 Fel på utloppssensorn
EC Överströmsskydd
D Avfrostning
P Pumpning / Tömning
RENGÖRING OCH UNDERHÅLL
NOTERA! Dra alltid ut stickkontakten ur uttaget före rengöring eller service.
- Underhåll får endast utföras av kvalificerad personal.
- Apparaten måste kopplas bort från elnätet innan du tar bort locken.
- Om apparaten inte är igång kan värmaren fortfarande vara varm.
Rengöring av filtret
För att ta bort filtret, lossa först skruven i mitten (t.ex. med ett mynt).
Aggregatet har ett insugsluftfilter som ska kontrolleras med jämna mellanrum och kontrolleras och rengöras vid behov.
Rengör den med en dammsugare eller tvätta den. Filtret måste vara helt torrt innan det sätts ihop igen.
VARNING: Använd aldrig enheten utan filtret, damm kommer att påverka driften negativt.
KÖLDMEDIUM R290
Kylning uppnås genom att använda R290 köldmedium, en naturgas (propan) i ett slutet system.
Eftersom det är mycket brandfarligt rekommenderas försiktighet: Ingen öppen låga eller värmekälla
nära apparaten – användning och förvaring i ett rum med en golvyta på minst 10 m2, årlig inspektion av en auktoriserad specialist, som kommer att fylla på köldmediet vid behov.
Avfuktarskåp
Torka regelbundet med en fuktig trasa med ett milt hushållsrengöringsmedel.
CLEANING AND MAINTENANCE (2)
RENGÖRING OCH UNDERHÅLL (2)
Attention! Always disconnect from the mains before cleaning or servicing.
Uppmärksamhet! Dra alltid ut stickkontakten ur uttaget före rengöring eller service.
Keep the filter, spirals and all grilles clean.
Håll filtret, spiralerna och alla galler rena.
This will help ensure proper operation.
Detta kommer att bidra till att säkerställa korrekt drift.
1) remove the hose from the air outlet (if fitted)
1) Ta bort slangen från luftutloppet (om sådan finns).
2) unscrew the side panels (6 screws)
3) Take out the filter and clean it.
2) Skruva loss sidopanelerna (6 skruvar).
3) Ta ut filtret och rengör det.
4) Remove dust from the panels with a soft dry cloth.
4) Ta bort damm från panelerna med en mjuk, torr trasa.
5) Clean the inside carefully with a hoover, be careful not to damage delicate parts.
6) Attach the side panels in the reverse order.
5) Rengör noggrant insidan med en dammsugare, var noga med att inte skada ömtåliga delar.
6) Fäst sidopanelerna i omvänd ordning.
FELSÖKNING
Fel Orsak
Vatten droppar ut när enheten flyttas.
Enheten kopplades bort innan pumpningen slutfördes.
Enheten fungerar inte. - Ingen ström till maskinen.
- Enheten är inte påslagen.
- Den inställda luftfuktigheten har uppnåtts.
Lösning
Se till fullständig pumpning/tömning innan avfuktaren flyttas.
- Anslut enheten. Kontrollera strömmen i eluttaget och undersidan av enheten.
- Slå på enheten.
- Välj CO (kontinuerlig) om du fortfarande vill avfukta efter att inställt värde uppnåtts.
Vatten på golvet. Avloppsslangen är lös. Inte korrekt ansluten. Dra åt avloppsslangens anslutning.
Avfuktaren producerar för lite vatten.
- Rumstemperaturen är för låg.
– Dörrarna och fönstren är öppna.
– Enheten har inte använts tillräckligt länge.
- Luftfiltret, kylslingorna är smutsiga.
- Öka rumstemperaturen.
- Stäng alla dörrar och fönster.
- Låt enheten gå längre.
- Kontrollera filter och kylslingor och rengör.
SPECIFIKATIONER MODELL EPD100LGR
TECHNICALSPECIFICATIONSEPD330LGR
TECHNICALSPECIFICATIONSEPD330LGR
UK
UK
Avfuktningskapacitet
EU
EU
WaterRemovalCapacity
WaterRemovalCapacity
50 L/dag (35 °C RH95%)
150L/day(35 0CRH90%)
150L/day(35 0CRH90%)
35 L/dag (30 °C RH80%)
90L/day(30 0CRH80%)
90L/day(30 0CRH80%)
20 L/dag (27 °C RH60%)
50L/day(27 0CRH60%)
50L/day(27 0CRH60%)
Spänning / Frekvens
Efficiency (30 0CRH80%)
Efficiency (30 0CRH80%)
220-240 V / ~50 Hz
Nominell effekt 475 W
Voltage/Frequency
Voltage/Frequency
Nominell ström 2,1 A
RatedPower
RatedPower
Luftflöde 330 m3/h
RatedCurrent
RatedCurrent
Ljudnivå 50 dB (A)
AirFlow
301WattsperLitre
301WattsperLitre
220-240V~50Hz
220-240V~50Hz
965W (27 0CRH60%)
965W (27 0CRH60%)
4.3A (27 0CRH60%)
4.3A (27 0CRH60%)
1.000m3/h
1.000m3/h
köldmedium R290 / 0,135 kg
Noiselevel
Noiselevel
Driftstemperatur 1 ~38 °C
60dB(A)
Refrigerant
Refrigerant
Vikt 22 kg
OperationTemperature
OperationTemperature
Storlek (B x H x D) 310 x 370 x 500 mm
N.Weight
N.Weight
Strömkabel 5 m
Dimensions(WxHxD)
Dimensions(WxHxD)
Avloppsslang 12 m
PowerCord
PowerCord
Drainhose
Drainhose
R290/0.265kg 1~38 0C 44.8kg
60dB(A) R290/0.265kg 1~38 0C 44.8kg
705x450x530mm 5m 5m
705x450x530mm 5m 5m
220-240 Volt (50 Hz)IEC 60309 stickpropp för Storbritannien och EU
220-240Volt(50Hz)IEC60309 plug forUKandEU
220-240Volt(50Hz)IEC60309 plug forUKandEU
Enheten måste vara elektriskt jordad
• Anslut nätsladdens 3-stiftskontakt direkt till ett jordat uttag.
• Använd inte med en adapter.
VARNING: APPARATEN FÅR INTE
INSTALLERAS, ANVÄNDAS ELLER FÖRVARAS I ETT RUM MED EN GOLVYTA PÅ MINDRE ÄN 15 M2
15
15
RISK FÖR BRAND OCH ELEKTRISKA STÖTAR
Håll kablar och motor torra.
Använd inte när du står i vatten.
Om elektriska komponenter blir blöta, låt dem torka helt före användning.
For more than 50 years, we have specialised in both air treatment and the production and development of dehumidifiers and mobile air conditioners. Our quality products are manufactured according to the latest technological developments and are specially designed to achieve a clean, better and more pleasant indoor climate.
This ECOR PRO dehumidifier is a powerful dehumidifier suitable for professional use. For more than 50 years, we have specialised in both air treatment and the production and development of dehumidifiers and mobile air conditioners. Our quality products are manufactured according to the latest technological developments and are specially designed to achieve a clean, better and more pleasant indoor climate.
To ensure that you get the most out of all the possibilities, we recommend that you read these operating instructions carefully. Keep the instructions in a safe place within easy reach, so that you can refer to them again at a later date if necessary.
To ensure that you get the most out of all the possibilities, we recommend that you read these operating instructions carefully. Keep the instructions in a safe place within easy reach, so that you can refer to them again at a later date if necessary.
Forsafetyreasons,pleasereadtheseoperatinginstructionscarefullybeforeusingyourappliance.The deviceisintendedexclusivelyforprofessionaluseby qualifiedpersonnel. Personswhoare notfamiliar with thisdeviceshouldnotuseit.
For safety reasons, please read these operating instructions carefully before using your appliance. The device is intended exclusively for professional use by qualified personnel. Persons who are not familiar with this device should not use it.
Checkthemainswiththeratingplate.
For safety reasons, please read these operating instructions carefully before using your appliance. The device is intended exclusively for professional use by qualified personnel. Persons who are not familiar with this device should not use it.
Connection voltage: 220-240 Volt (50 Hz) - IEC 60309 plug for UK and EU, 115V (60Hz) - USA plug for USA and Canada.
Check the mains with the rating plate. The dehumidifier is suitable for indoor use only with a grounded electrical outlet. Connection voltage: 220-240 Volt (50 Hz) - IEC 60309 plug for UK and EU.
HOW THE UNIT WORKS
Humid air is drawn into the device by a rotating fan.
Humid air is drawn into the device by a rotating fan.
After passing through the filter, which stops dust particles, the air is cooled by a cooling coil.
After passing through the filter, which stops dust particles, the air is cooled by a cooling coil.
Humid air is drawn into the device by a rotating fan.
After passing through the filter, which stops dust particles, the air is cooled by a cooling coil.
The water vapour in the air condenses into water, which is discharged via a discharge hose.
The water vapour in the air condenses into water, which is discharged via a discharge hose.
The water vapour in the air condenses into water, which is discharged via a discharge hose.
The drier air is then heated by a heat exchanger and blown back into the room by the fan.
The drier air is then heated by a heat exchanger and blown back into the room by the fan.
The drier air is then heated by a heat exchanger and blown back into the room by the fan.
of parts
• Keep children out of reach of the device.
GENERAL AND SAFETY (1)
• Maintenance and repairs should only be carried out by certified personnel. Otherwise the warranty will become void.
GENERAL AND SAFETY (1)
The installation must be in full accordance with the local regulations, provisions and standards.
• This dehumidifier is a safe device (CE). However, as with any electrical appliance, care should be taken.
- Only install the device in an area that corre sponds to its IP rating.
NEVER connect the unit using an extension cord. If a suitable earthed socket is not available, have this installed by a certified professional.
• Always disconnect the power supply before cleaning the unit or any part of it.
Please note that the dehumidifier must have stood upright for at least one hour before use.
The installation must be in full accordance with the local regulations, provisions and standards. Please note that the dehumidifier must have stood upright for at least one hour before use.
• When you are not using the dehumidifier, always unplug it from the wall socket.
• Keep children out of reach of the device.
• When you are not using the dehumidifier, always unplug it from the wall socket.
• Keep children out of reach of the device.
• Maintenance and repairs should only be carried out by certified personnel. Otherwise the warranty will become void.
• Maintenance and repairs should only be carried out by certified personnel. Otherwise the warranty will become void.
• This dehumidifier is a safe device (CE). However, as with any electrical appliance, care should be taken.
The environmentally friendly R290 refrigerant is in a closed circuit; it is highly flammable. Please observe the following:! No open flames or sources of heat in the vicinity of the appliance in the same room. Do not open the closed refrigeration circuit. Only qualified personnel, trained, certified and accustomed to using flammable refrigerants may carry out maintenance work. See warning next page.
• This dehumidifier is a safe device (CE). However, as with any electrical appliance, care should be taken.
The environmentally friendly R290 refrigerant is in a closed circuit; it is highly flammable. Please observe the following:! No open flames or sources of heat in the vicinity of the appliance in the same room. Do not open the closed refrigeration circuit. Only qualified personnel, trained, certified and accustomed to using flammable refrigerants may carry out maintenance work.
See warning next page.
The environmentally friendly R290 refrigerant is in a closed circuit; it is highly flammable. Please observe the following:! No open flames or sources of heat in the vicinity of the appliance in the same room. Do not open the closed refrigeration circuit. Only qualified personnel, trained, certified and accustomed to using flammable refrigerants may carry out maintenance work. See warning next page.
- Always disconnect the power supply before cleaning the unit or any part of it.
• Never clean the dehumidifier by spraying it with water or immersing it in water.
The plug must always be easily accessible when the appliance is connected.
- Never clean the dehumidifier by spraying it with water or immersing it in water.
• Do not cover or insert anything into the openings of the dehumidifier.
- Do not cover or insert anything into the openings of the dehumidifier.
• Only install the device in an area that corresponds to its IP rating.
Important: The appliance MUST always be connected to earth. If the power supply is not earthed, do not connect the device at all.
- Only install the device in an area that corresponds to its IP rating.
NEVER connect the unit using an extension cord.
If a suitable earthed socket is not available, have this installed by a certified professional.
NEVER connect the unit using an extension cord. If a suitable earthed socket is not available, have this installed by a certified professional.
Warning! Never use the appliance if the cord or plug is damaged. If the cord is damaged, have it replaced by an authorised professional to avoid danger and accidents.
The plug must always be easily accessible when the appliance is connected.
The plug must always be easily accessible when the appliance is connected.
Important: The appliance MUST always be connected to earth. If the power supply is not earthed, do not connect the device at all.
Important: The appliance MUST always be connected to earth. If the power supply is not earthed, do not connect the device at all.
Warning! Never use the appliance if the cord or plug is damaged. If the cord is damaged, have it replaced by an authorised professional to avoid danger and accidents.
Warning! Never use the appliance if the cord or plug is damaged. If the cord is damaged, have it replaced by an authorised professional to avoid danger and accidents.
GENERALANDSAFETY(2)
WARNING FOR R290 REFRIGERANT!
WARNINGFORR290REFRIGERANT!
UK EU
R290 refrigerant is a flammable natural gas and may only be used by certified personnel.
Leaking refrigerant can cause fire and explosion, therefore NEVER work on the device yourself! Store, install and use the dehumidifier in rooms with at least 10 m2 of floor space.
For best results, run your dehumidifier in a closed space. Close doors and windows. Place the unit by a wall, free of obstacles and free of anything that obstructs the airflow (inlet and outlet).
For best results, run your dehumidifier in a closed space. Close doors and windows. Place the unit by a wall, free of obstacles and free of anything that obstructs the airflow (inlet and outlet).
Discharge hose connection
Discharge hose connection
Your dehumidifier comes with a drainage hose. The hose can be attached to the unit with a quick connector. Unwind the drainage hose and place the end into a sink, drain, bucket or outside the area to be dehumidified where the water can drain away. If using a bucket, empty the bucket regularly so that it does not overflow.
Position
POSITION
Always leave the device upright for at least one hour after transport. Oil from the compressor can then flow back into the compressor from the cooling coils. The device must be upright and level.
Always leave the device upright for at least one hour after transport. Oil from the compressor can then flow back into the compressor from the cooling coils. The device must be upright and level.
Your dehumidifier comes with a drainage hose. The hose can be attached to the unit with a quick connector. Unwind the drainage hose and place the end into a sink, drain, bucket or outside the area to be dehumidified where the water can drain away. If using a bucket, empty the bucket regularly so that it does not overflow.
NB. Always roll out the drainage hose completely. Never place the end higher than 3.5 metres. Check the hose for kinks and obstacles, so that the condensation water is not obstructed in its flow. This prevents leakage from the pump.
NB. Always roll out the drainage hose completely. Never place the end higher than 3.5 metres. Check the hose for kinks and obstacles, so that the condensation water is not obstructed in its flow. This prevents leakage from the pump.
Quick-connect fitting Press to install / release
INSTALLATION (2)
INSTALLATION (2)
Installation of additional hose / dry air outlet
Installation of additional hose / dry air outlet
An external hose can be optionally mounted on the discharge grille. This can be useful for certain drying requirements.
An external hose can be optionally mounted on the discharge grille. This can be useful for certain drying requirements.
1) loosen the four screws of the air outlet channel
1) Loosen the four screws of the air outlet channel.
2) replace the adapter turned
2) Mount the adapter on the grille using the four screws.
3) attach the hose to the adapter
3) Attach the hose to the adapter.
Mounting of duct adapter
An external hose can optionally be mounted on the outlet grille.
Straps can be used to easily secure the power cord and drain hose.
Straps can be used to easily secure the power cord and drain hose.
OPERATION AND SETTINGS
OPERATION AND SETTINGS
Control panel
Control panel
Menu - Display screen - On/off button
MENU button
Menu selection / Up - Pump button
DISPLAY SCREEN
ON / OFF button
Main Menu - Display
MENU SELECTION / UP button
Insert plug into earthed socket
PUMP button
When the unit is connected, it starts the diagnostic procedure.
MAIN MENU - DISPLAY
Insert plug into earthed socket.
The display shows “self diagnosis”. When the unit is ready, the display shows “stand by”.
When the unit is connected, it starts the diagnostic procedure.
The display shows "SELF DIAGNOSIS".
When the unit is ready, the display shows "STAND BY".
Switching the unit on/off
Switching the unit on/off.
Press the “on/off” button. The unit starts up, the display shows “unit on”.
Press the ON/OFF button. The unit starts up, the display shows "UNIT ON".
Operating time 00:00, set value (00%), current temperature 00 oC and current humidity 00%.
Operating time 00:00, set value (00%), current temperature 00 oC and current humidity 00%.
If the display reads PLEASE WAIT COMP DELAY and performs a numeral count down from a maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes the compressor delay protection, the unit will start working immediately.
If the display reads PLEASE WAIT COMP DELAY and performs a numeral count down from a maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes the compressor delay protection, the unit will start working immediately.
If the display reads "PLEASE WAIT COMP DELAY" and performs a numeral count down from a maximum of 180 seconds to 0, this is the compressor delay protection. Once the unit completes the compressor delay protection, the unit will start working immediately.
Purge
Purge
Pump
Press the purge button, the unit will pump for 50 seconds to manually empty water from the condensate pump reservoir.
Press the purge button, the unit will pump for 50 seconds to manually empty water from the condensate pump reservoir.
Press the PUMP button, the unit will pump for 50 seconds to manually empty water from the condensate pump reservoir.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will flash P in top right corner.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will flash P in top right corner.
During normal operation, the pump purges 90 seconds when the reservoir is full. The display will flash P in top right corner.
Notice: Always press the PUMP button prior to move the unit.
Notice: Always press the PURGE button prior to move the unit.
Notice: Always press the PURGE button prior to move the unit.
Display Menu
Display Menu
Display Menu
Press the DISPLAY MENU button cycle through the display of additional dehumidifier conditions and User Setting. To return to the Main Menu, wait for 10 seconds no operation or keep pressing DISPLAY MENU button till it back to the Main Menu.
Press the MENU button to cycle through the display of additional dehumidifier conditions and user setting. To return to the MAIN MENU, wait for 10 seconds or keep pressing MENU button till it back to the MAIN MENU.
Press the DISPLAY MENU button cycle through the display of additional dehumidifier conditions and User Setting. To return to the Main Menu, wait for 10 seconds no operation or keep pressing DISPLAY MENU button till it back to the Main Menu.
Menu selection
Menu Selection
Press the MENU SELECTION button to change / check the value on the "User Setting Menu Display".
Press the MENU SELECTION button to change / check the value on the “User Setting Menu Display”. The MENU SELECTION button acts as the UP button for adjusting the set value for humidistat mode operation.
The MENU SELECTION button acts as the UP button for adjusting the set value for humidistat mode operation.
User can use DISPLAY MENU and MENU SELECTION buttons to check and set some functions.
User can use MENU and MENU SELECTION buttons to check and set some functions. Each press of MENU button, will show next parameter. See list below. To select the parameter you wish to adjust, press the MENU SELECTION button, the arrow shows in the left top corner means you can adjust the parameter or the screen is locked now. Press MENU button to exit the locked interface.
Each press of DISPLAY MENU button, will show next parameter. See list below. When you wish the parameter you wish to adjust, press the MENU SELECTION button, the arrow shows in the left top corner means you can adjust the parameter or the screen is locked now. Press DISPLAY MENU button to exit the locked interface.
JOB HOURS
Job hours
Press MENU SELECTION to reset the working hours to zero.
Shows the total number of operating hours on a specific task. Press MENU SELECT to reset the operating time when the job is completed.
Live hours
LIFE HOURS
Shows total of unit hours. Value cannot be modified.
Shows total of unit hours. Value cannot be modified.
Temperature
Temperature
of INLET / OUTLET
of Inlet / Outlet
Shows current temperature and relative humidity of inlet and outlet.
Shows current temperature and relative humidity of inlet and outlet.
Humidistat Mode
Humidistat Mode
Humidistat Mode
Humidistat Mode
HUMIDISTAT MODE
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Humidistat Mode
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%-90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Temp Units
Ad on mode press MENU SELECTION to adjust the set value from CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%90%. Choose the desired value and wait for 5 seconds, the sett will be kept. CO means continuous dehumidifying.
Temp Units
Temp Units
TEMP UNITS
Temp Units
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Temp Units
COIL TEMP
Coil Temp
Coil Temp
Coil Temp
Coil Temp
Shows the evaporator coil temperature.
Shows the current temperature scale. Press MENU SELECTION to set Fahrenheit or Centigrade scale.
Shows the evaporator coil temperature.
Shows the evaporator coil temperature.
Shows the evaporator coil temperature.
Shows the evaporator coil temperature.
Comprss Current
Coil Temp
Comprss Current
Comprss Current
COMPRSS CURRENT
Comprss Current
Shows the current draw in amps.
Shows the current draw in amps.
Shows the evaporator coil temperature.
Shows the current draw in amps.
Shows the current draw in amps.
Shows the current draw in amps.
If the unit can not detect the compressor current, the display shows - - A.
If the unit can not detect the compressor current, the display shows - - A.
If the unit can not detect the compressor current, the display shows - - A.
If the unit can not detect the compressor current, the display shows - - A.
Comprss Current
Shows the current draw in amps.
ENERGY METER
Code Message
Code Message
Code Message
Code Message
If the unit can not detect the compressor current, the display shows - - A.
Display shows total hours of use in kWh. The displayed value cannot be adjusted. Note down kWh consumption before and after each job.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
Code Message
CODE MESSAGE
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page. 12
If the unit on-board diagnostics discover a problem, the unit will display an error code. See the error codes next page.
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page. 12
If the unit on-board diagnostics discover a problem, the unit will display the error message, see the Code Message next page.
Code message (error code)
E1
Explanation
Temperature sensor error
E2 Inlet sensor error
E3 Cooling system failure
E4 Pump error
E5 Outlet sensor error
EC Overcurrent protection
D Defrosting
P Pump / Purging
CLEANING AND MAINTENANCE (1)
Attention! Always disconnect from the mains before cleaning or servicing.
- Maintenance may only be carried out by qualified personnel.
- The appliance must be disconnected from the mains before the covers are removed.
- If the appliance is not running, the heating element may still be hot.
REFRIGERANT R290
Cooling is achieved by using R290 refrigerant, a natural gas - propane - in a closed system. Since it is highly flammable, caution is advised: no open flame or source of heat near the appliance, use and storage in a room with a floor space of at least 10 m2, annual inspection by an authorised professional, who will top up the refrigerant if necessary.
Cleaning the filter
To remove the filter, first loosen the screw in the middle. (e.g. with a coin).
The unit has an intake air filter that must be checked periodically and checked and cleaned if necessary. Clean it with a hoover or wash it.
The filter must be completely dry before being replaced.
CAUTION: Never run the unit without the filter, dust will adversely affect operation.
Housing
Wipe regularly with a damp cloth using a mild household detergent.
CLEANING AND MAINTENANCE (2)
CLEANING AND MAINTENANCE (2)
Attention! Always disconnect from the mains before cleaning or servicing.
Attention! Always disconnect from the mains before cleaning or servicing.
Keep the filter, spirals and all grilles clean.
This will help ensure proper operation.
Keep the filter, spirals and all grilles clean. This will help ensure proper operation.
1) remove the hose from the air outlet (if fitted)
1) Remove the hose from the air outlet (if fitted).
2) unscrew the side panels (6 screws)
2) Unscrew the side panels (6 screws).
3) Take out the filter and clean it.
3) Take out the filter and clean it.
4) Remove dust from the panels with a soft dry cloth.
4) Remove dust from the panels with a soft dry cloth.
5) Clean the inside carefully with a hoover, be careful not to damage delicate parts.
5) Clean the inside carefully with a hoover, be careful not to damage delicate parts.
6) Attach the side panels in the reverse order.
6) Attach the side panels in the reverse order.
TROUBLE SHOOTING
Fault Cause Solution
Water drips out when moving the unit.
Unit was unplugged before purging/ pumping was complete.
Unit does not operate. - No power to machine.
Purge/pump out unit before moving.
- Unit not switched on.
- The set humidity level has been reached.
Water on the floor. The drain hose is loose. Not correct connected.
Unit collect too little water.
- Room temperature is too low.
- The doors and windows are open.
- The unit has not been used long enough.
- The air filter, coils are dirty.
- Plug in unit. Check power at outlet and base of unit.
- Switch on the unit.
- Choose CO (continuous) if you still want to dehumidifying after the set value has been reached.
