catalogue
orion
Floor Tile: Orion Charcoal 600x600mm
2
Floor Tile: Orion Dark Grey Matt 600x600mm 3
Matt
Orion Sand, Orion Charcoal, Orion Dark Grey, Orion Light Grey Product Specifications Material: Ceramic Edge: Pressed Surface finish: Matt and External Nominal sizes: 300x300mm, 300x600mm and 600x600mm Application: Floor and Wall Slip resistance:
in 300x300, 300x600 Wet pendulum test: P3 External in 300x600, 600x600 Wet pendulum test: P5 Abrasion resistance: PEI 4 Shade variation: V2 Faces: 300x300mm = 32 faces 300x600mm = 16 faces 600x600mm = 8 faces Lifetime Guarantee Made in Australia V1 UNIFORM APPEARANCE V2 SLIGHT VARIATION V3 MODERATE VARIATION V4 SUBSTANTIAL VARIATION 4
Wall Tile: Orion Light Grey 300x600mm Floor Tile: Orion Light Grey 300x600mm stocked With its subtle stone design and colour palette made up five neutrals, the Australian-made Orion range encapsulates the practicality and simplicity of contemporary living. Available in matt and external finishes in three different sizes, this versatile series can be laid continuously from indoors to out for a seamless finish and a fully coordinated design scheme. Charcoal 300x600mm Chalk 300x600mm Light Grey 300x600mm Dark Grey 300x600mm Sand 300x600mm 5
Floor: Orion Sand 300x300mm 6
Floor and Wall Tile: Orion Chalk 300x600mm 7
stocked lines
Colour Finish Size
Matt
Charcoal
Dark Grey
Light Grey
Sand
Chalk
300x300mm, 300x600mm, 600x600mm
External 300x600mm and 600x600mm
Matt
300x300mm, 300x600mm, 600x600mm
External 300x600mm and 600x600mm
Matt
300x300mm, 300x600mm, 600x600mm
External 300x600mm and 600x600mm
Matt
300x300mm, 300x600mm, 600x600mm
External 300x600mm and 600x600mm
Matt
300x300mm, 300x600mm, 600x600mm
External 300x600mm and 600x600mm
8
product specifications
NCIA products conform to Group B1b. NCIA tiles meet and exceed requirements under AU ISO 13006-2013
Category
NCIA Standards
International / Australian Standards
Length and width +- 0.5mm(difference from work size) +-2.0mm (difference from work size)
Thickness +- 0.5mm(difference from work size) +- 0.5mm(difference from work size)
Centre Curvature +- 0.5mm(difference from work size) +-2.0mm (difference from work size)
Straightness of Edge +- 0.5mm(difference from work size) +-2.0mm (difference from work size)
Edge Curvature +- 0.5mm(difference from work size) +-2.0mm (difference from work size)
Resistance to Surface Abrasion Minimum PEI 3
Stain Resistance Minimum Class 4 Minimum Class 3
Resistance to Chemicals Class A
Water Absorption
Less than 3%
Resistance to Crazing No Crazing
Resistance to Frost Resistant Resistance to Fire Non-Flammable
Gaseous Emissions when Exposed to Fire No Emission
VOC Emissions No Emission
Fading in UV/Sunlight Color Permanence
Moisture Expansion
Modulus of Rupture (N/mm2)
Less than 0.01%
Minimum 30N/mm2
Less than 0.06%
Minimum 30N/mm2
Surface Quality Minimum 98% Defect Free Minimum 95% Defect Free
9