fragmenti cotto
Wall Tile: Fragmenti Cotto Corto 2 13x98 mm on 298x298x14mm
3
Wall Tile: Fragmenti Cotto Lungo 2 23x148mm on 298x298mm 4
Wall Tile: Fragmenti Cotto Corto 2 13x98 mm on 298x298x14mm 5
Floor and Wall Tile: Fragmenti Cotto Lungo 3 23x298 mm on 298x298x14mm 6
Fragmenti Cotto is a program of COTTO di IMPRUNETA mosaic patterns with “arrotato” surface and “tumbled” edges. The collection has its roots in the Impruneta area near Florence, in the valleys of the Ema and Greve rivers, rich in an unique clay called Galestro. It’s thanks to this particular clay that Cotto di Impruneta has its distinctive colour and superior technical performances. The process of the dried raw materials with steel brushes, called “arrotatura”, cleans the material from extrusion marks and gives it the typical cotto brushed surfaces. The mixture of earth and water, after being degrassed, extruded and shaped loses its natural moisture thanks to a long air drying process which takes up to 42 hours. The fire and the 72 hours of firing temperature close to 1000 degrees forge the materials and give it the character and the strength which make Cotto di Impruneta a reference of the Made in Tuscany and Made in Italy.
Wall Tile: Fragmenti Cotto Corto 2 13x98 mm on 298x298x14mm
stocked
13x98mm
7
Fragmenti Cotto Corto 2
on 298x298mm Fragmenti Cotto Lungo 2 23x148mm on 298x298mm Fragmenti Cotto Lungo 3 23x298mm on 298x298mm
Floor and Wall Tile: Fragmenti Cotto Lungo 2 23x148 mm on 298x298x14mm 8
9
Floor and Wall Tile: Fragmenti Cotto Lungo 2 23x148 mm on 298x298x14mm
Floor and Wall Tile: Fragmenti Cotto Lungo 3 23x298 mm on 298x298x14mm 10
Product Specifications Material: Terracotta Edge: Tumbled Surface finish: Brushed Application Floor and Wall Nominal sizes:
on
Lifetime Guarantee Made in Italy 23mm 298mm 298mm 13mm 298mm 298mm 98mm 23mm 298mm 298mm 148mm dimensions + thickness layouts + grouts product specification 14mm Ultracolor Plus 130 Jasmine Ultracolor Plus 115 Grigio Fume Ultracolor Plus 111 Grigio Argento Ultracolor Plus 145 Terra di Siena Ultracolor Plus 120 Black Fragmenti Cotto Corto 2 (13x98mm on 298x298mm) 11
13x98mm
298x298x14mm, 23x148mm on 298x298x14mm 23x298mm on 298x298x14mm
Ultracolor Plus 130 Jasmine Ultracolor Plus 130 Jasmine Ultracolor Plus 115 Grigio Fume Ultracolor Plus 115 Grigio Fume Ultracolor Plus 111 Grigio Argento Ultracolor Plus 111 Grigio Argento Ultracolor Plus 145 Terra di Siena Ultracolor Plus 145 Terra di Siena Ultracolor Plus 120 Black Ultracolor Plus 120 Black layouts + grouts Fragmenti Cotto Lungo 2 (23x148mm on 298x298mm) Fragmenti Cotto Lungo 3 (23x298mm on 298x298mm) 12
fragmenti terracotta, cleaning sealing & maintenance Guide
PRE-SEALING
Fragmenti Terracotta is a high-quality dense variety that does not require pre-sealing.
IMPORTANT! - Remove any excess pre sealer from the face of the stone within 5 minutes.
INITIAL CLEANING / GROUT HAZE REMOVAL
Once the terracotta has been laid, grouted and washed, a grout residue/haze may be left. It is recommended to wait for 3-4 days for the grout to harden sufficiently before attempting to remove the grout haze in preparation for sealing.
It is advised to keep the floor and or walls protected during this timeframe if work is still being done by other trades, as they may need to work over or near your freshly laid terracotta.
What you will need – (NT Residual Surface Cleaner, NT All Purpose Cleaner, Spirit Doodlebug, bucket, broom, mop) Spirit Safe Acid can also be used to remove the grout haze.
IMPORTANT! - It is good practice to test first for acid sensitivity before cleaning any surface with NT Residual Surface Cleaner or Spirit Safe Acid.
1. Sweep and or vacuum the area to remove any loose debris.
2. In a bucket, dilute 10 parts clean water to 1 part NT Residual Surface Cleaner or Spirit Safe Acid and apply to the area that needs cleaning. Use a broom to evenly distribute the solution over the area.
3. Allow the solution to sit for 2-3 mins. If you notice that the solution is drying, add more cleaner to keep it wet. *Only clean in sections that you can handle
4. Now scrub the area with a Spirit Doodlebug (scouring pad.) The multi-directional head attaches easily to a broom handle for easy cleaning in hard-to-reach areas.
5. Remove the solution with a dense mop and rinse with NT All Purpose Cleaner at a dilution of 20 parts clean water to 1 part NT All Purpose Cleaner. If you have access to a wet/dry vacuum it is the ideal way to remove the dirty water.
6. If necessary, rinse the area with clean water and allow it to dry completely before sealing.
nationaltiles.com.au
13
SEALING
Once the terracotta is clean and dry, sealing can begin. It is recommended that a breathable penetrating sealer is used. Test first before use, preferably on a spare piece of tile.
• NT Penetrating Sealer (low VOC, Water Based) and Spirit Premium Seal (solvent-based) are suitable for use. Both sealers provide a natural-look in appearance and feel.
What you will need – (Sealer, Spirit Microfibre Applicator, clean white rags, gloves, respirator and solvent suitable tray (for solvent-based sealer only)
2 coats are required, allowing approximately 1 hour in between coats. Follow the directions on the can or bottle very closely.
Please note: Penetrating sealers will not prevent surface etching or scuffing.
MAINTENANCE
The terracotta can be cleaned regularly using NT All Purpose Cleaner. If need be, the tiles and grout joints can be cleaned periodically (every 6-12 months) depending on traffic and wear with Spirit HDC or Spirit Bright As.
RE-SEALING
Please note: Weather conditions, harsh cleaning methods using high-alkaline, acid or solventbased cleaners will affect the long-term performance of any sealer. Following the appropriate Spirit Guide relating to your substrate will ensure the very best protection. The longevity of your sealer is greatly dependant on the following 4 points:
1. Using a premium quality sealer.
The range at National Tiles are all premium quality, high performance sealers.
2. Proper application of the sealer. This includes the cleaning process prior to sealing. Sealing a floor that hasn’t properly dried, sealing when it’s too hot or cold, not mopping up excess sealer and not applying enough sealer are a few of the mistakes made.
3. Where the sealed area is? Is it a high traffic area?
Commercial areas that see more traffic and are cleaned daily will need re-sealing before most domestic areas; however, in domestic situations like, outdoor areas, high-traffic internal areas and shower cubicles, these areas will need to be re-sealed more often. If in doubt, contact Spirit Sealers.
4. How the floor is maintained?
Cleaning regularly with the wrong types of cleaners will break down the sealer prematurely and may even do damage to your terracotta. The cleaners in this guide have been formulated especially for the stone and tile industry.
This is a general guide for Fragmenti Terracotta. National Tiles always recommends to test first when cleaning or sealing any surface. For more technical information contact sales@spiritsealers.com
nationaltiles.com.au
14
