Torque Poster 2007 -English

Page 1

Wheel Mounting Procedure Proper mounting practice is as easy as 1,2,3,4 ...

1

FIT

2

• Wheel should fit flat against the hub. • All surfaces should be clean and free of contamination or foreign material. • There should be no fit interference at the hub face or hub diameter.

3

TIGHTEN*

• Avoid cross-threading by starting each lug nut by hand as shown.

4

• Apply torque to the lug nuts in a star pattern as shown below. • Gradually increase torque on the lug nuts until each lug nut has achieved the specified torque.

4

CONFIRM

• A second check verifying the torque should be performed using a dial or digital torque gauge.

* Do not use an impact wrench without proper torque attachment. 4

FASTEN

5

5

3

7

2

1

2

1

1

2

5 3

3

4-LUG PATTERN

!

5-LUG PATTERN

4

6

3

2

1

4

8 6

6-LUG PATTERN

8-LUG PATTERN

WARNING

Improper wheel fastening can result in wheel separation from the vehicle causing serious injury and/or death.

Additional information regarding the proper assembly of wheels on trailers may be obtained from the National Association of Trailer Manufacturers, 1320 SW Topeka Blvd., Topeka, KS 66612, (785) 272-4433. 12/07


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.