http://www.machikawa-pro.com/TOROCTLG/GLFSPLK by negimachi negimachi

2010 Irrigation Products Illustrated Parts Breakout

Golf Sprinklers Section

GENERAL INFORMATION Please note the following usage guidelines: • When dashes (- - - - -) are shown in place of a part number, the part is either not available for sale or not sold separately. Refer to the accompanying Service Items listing for availability. • An asterisk (•) preceding a part number indicates the item is only available through the Toro Finished Goods Distribution System and must be ordered accordingly. • This book is updated annually. The published part numbers and descriptions are subject to change. If changes and/or corrections are required, the updated information will be made available through the Toro Distributor Operations Bulletin and/or Tech Tip communications. • Common abbreviations used within this publication: A Amp Assy. ADJ B BSP COM CR CSA EL Elec Exp F FC FC GPM Hyd. Hz in. Int. Int. T L/ lbs. M M/F N/I NC NC NO

= = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Ampere Ampere Assembly Adjustable Barbed British Standard Pipe Check-O-Matic Contamination Resistant Canadian Standards Association Electric Electric Export Female Full Circle (Sprinkler) Flow Control (Valve) Gallons Per Minute Hydraulic Hertz Inch Internal Internal Tooth Less Pounds Male Male/Female Not Indicated Normally Closed (Hydraulic) Normally Closed (Micro Switch) Normally Open (Hydraulic)

NO = NPT = PC = Pot. = PV = PHPH = PHFH = PT = PR = Prog. = RC = RPD = RPM = S = SST = SI = Svc = TM = V = VAC = VDC = VA = VIH = w/ = w/o = " = ' =

Normally Open (Micro Switch) National Pipe Thread Part Circle Potentiometer Pilot Valve Pan Head Phillips Head Pan Head Fillister Head Pin Type (Hydraulic) Pressure Regulated Program Rubber Cover Revolutions Per Day Revolutions Per Minute Slip Stainless Steel Side Inlet Service Timing Mechanism Volts Volts Alternating Current Volts Direct Current Volt Amps Valve In Head with without Inches Feet

590G-4 & 590G-6

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 3 4 5 5 6 6 7 8 8 9 10 10

-----89-5548 9-5112 89-8738 102-0621 102-1833 102-7660 35-9632 35-9633 89-0463 89-0969 89-0856 89-5896 89-0968 89-0970

Nozzle Screen, Filter, SST Screen, Riser (White Plastic, Regular Mesh) Screen, Riser (Red Plastic, Fine Mesh) Flush Plug, PRX & XF Cap, 590G Cap, Lavender Spring, 590G-4, COM Spring, 590G-6, COM Retainer, Spring Riser, 4" Riser, 6" COM Assy. Body, 4" Body, 6"

102-3995 102-3997

SERVICE ITEMS XF Riser Assy., 4P, COM (Includes Items 4, 8 & 9) XF Riser Assy., 6P, COM (Includes Items 4, 8 & 9)

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

590G-12

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 3 4 5 5 6 7 8 9 10

-----89-5548 9-5112 89-8738 102-0621 102-1833 102-7660 35-9634 89-0855 102-1246 89-5896 9-7236

Nozzle Screen, Filter, SST Screen, Riser (White Plastic, Regular Mesh Screen, Riser (Red Plastic, Fine Mesh) Flush Plug, PRX & XF Cap, 590G Cap, Lavender Spring, Return, 590G-12, COM Ratchet Riser COM Assy. Body, 12"

102-3999

SERVICE ITEMS XF Riser Assy., 12P COM (Includes Items 4, 9 & 10)

1 1 1 1 1 1 1 1 1 1 1 1

720 Series

Item No.

Part No.

Description

Quantity Per Assy.

1 2 2 3 4 5 6 7 8 8 9 10 11 12 13 14 15 16 17 18

363-3864 102-0257 102-0258 102-5385 89-9446 89-1385 102-0255 363-4195 89-9725 89-9726 89-9428 363-4102 89-9443 89-4702 9-1487 3-2633 102-0081 35-9646 -----------

Screw, #8-32 x 1" Retainer, Debris Seal Retainer, Debris Seal, Effluent Seal, Debris Support, Riser Snap Ring Retainer, O-Ring, 720 O-Ring, 0.070" x 1.864" x 2.004" Buna Riser Assembly, PC (Includes Items 6–9) Riser Assembly, FC (Includes Items 6–9) Screen O-Ring, Paraffin AS-568 232 Sleeve, Riser Snap Ring, Valve Cylinder Assy., EL Spring, NO, EL Piston Assy., EL, Low Flow (Includes Item 16) Filter Assy., Metering, EL, NC Body Assy. (See p. 102) Pilot Valve Assy. (See p. 109)

102-0082 *102-0108 *102-0110 *102-0112 *102-0114

Valve Assy., EL, Low Flow, (Includes Items 13–15) Conversion Assy., 720 PC, Ribbed Body, (Includes Items 1–11, 15 & 16) Conversion Assy., 720 PC, Ribbed Body, Effluent, (Includes Items 1–11, 15 & 16) Conversion Assy., 720 FC, Ribbed Body, (Includes Items 1–11, 15 & 16) Conversion Assy., 720 FC, Ribbed Body, Effluent, ((Includes Items 1–11, 15 & 16)

SERVICE ITEMS

SERVICE TOOLS 995-15 995-100 995-08 995-76 995-83 89-7350

Selector Tool (Flag Tool) Valve Snap Ring Pliers with Screen Remover Valve Removal Tool Valve Installation Tool Multi-purpose Tool Adjustment Key

* Order Through Finished Goods Distribution System—Minneapolis 5

4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

720 Series Conversion Assembly

Item No.

Part No.

Description

Quantity Per Assy.

1 2 2 3 4 5 6 7 8 8 9 10 11 12 13

*102-0108 *102-0110 *102-0112 *102-0114 363-3864 102-0257 102-0258 102-5385 89-9446 89-1385 102-0255 363-4195 89-9725 89-9726 89-9428 363-4102 89-9443 35-9646 102-0081

Conversion Assy., 720 PC, Ribbed Body, (Includes Items 1–13) Conversion Assy., 720 PC, Ribbed Body, Effluent, (Includes Items 1–13) Conversion Assy., 720 FC, Ribbed Body, (Includes Items 1–13) Conversion Assy., 720 FC, Ribbed Body, Effluent, (Includes Items 1–13) Screw, #8-32 x 1" Retainer, Debris Seal Retainer, Debris Seal, Effluent Seal, Debris Support, Riser, Ribbed Body Snap Ring Retainer, O-Ring, 720 O-Ring, 0.070" x 1.739" x 1.879" Buna Riser Assembly, Part-circle (Includes Items 6–9) Riser Assembly, Full-circle (Includes Items 6–9) Screen O-Ring, Paraffin AS-568 232 Sleeve, Riser Filter Assy., Metering, EL, NC Piston Assy., EL, Low Flow (Includes Item 12) * Order Through Finished Goods Distribution System—Minneapolis 6

4 1 1 1 1 1 1 1 1 1 1 1 1 1 1

720G Series

1 6

2 7 3 4

Item No. 1 1 2 3 4 5 5 5 5 6 7 8

Part No. 102-2277 102-2278 89-8657 363-4195 -----*725G *724G *725GE *724GE 89-9428 89-7561 89-8658 102-2247 995-83 89-7350

Description

Quantity Per Assy.

Cover, Rubber Body Cover, Rubber Body, Effluent Snap Ring O-Ring Retainer w/Seal, (See Service Item 102-2247) Riser Assembly (Adjustable Part Circle) Riser Assembly (Full-Circle) Riser Assembly (Adjustable Part-Circle, Effluent) Riser Assembly (Full-Circle, Effluent) Screen Seal, Check Body SERVICE ITEMS Retainer w/Seal Assembly (Includes Items 3 and 4) SERVICE TOOLS Multi-purpose Tool Adjustment Key * Order Through Finished Goods Distribution Systemâ&#x20AC;&#x201C;Minneapolis 7

1 1 1 1 1 1 1 1 1 1 1 1

810G & 810GL

Item No. 1 2 3 4 4 4 5 6

Part No.

Description

Quantity

----89-9182 89-9183 102-3039 102-3040 102-3041 102-2633 102-1877

Cap and Riser Assy. (Order Complete Sprinkler) Screen Seal, Check Body Assy., NPT Threads Body Assy., BSP Threads Body Assy., ACME Threads Tree, Nozzle, High Flow, 7-30 GPM, 810G Tree, Nozzle, Low Flow, 1-9 GPM, 810GL

102-1303

SERVICE TOOLS Adjustment Tool

1 1 1 1 1 1 1 1

Notes:

DT34B Series Sprinkler

18 2

3 4

7 6 19

5 8

11 12 20

Model Number Information DT34B Body Inlet

3—1"

Arc

Body Threads

4—Full Circle 0—NPT 4—ACME 5—BSP

Valve Type

2—Check-O-Matic

XXXX Nozzles

3134 3538

X Optional

E–Effluent

For Example: When specifying a DT34B Series Sprinkler with ACME threads, #34 nozzle, you would specify: DT34B-42-3134 Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 6 6 6 6 6 6 7 8 9 10 11 12 12 12 12 12 12 12 12 13 14 15 16 17 18 19 20 20 21 22 23 23 23

Part No.

Description

Quantity Per Assy.

89-1589 102-0362 363-4839 102-4752 102-5588 102-5837 102-2925 102-2926 102-2928 102-2929 102-6944 102-6945 102-6883 102-6937 102-4335 102-5978 102-5597 363-4104 102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 102-4260 89-1385 363-4102 102-0134 102-0151 363-4167 102-0202 102-4503 102-6929 102-1940 102-5152 102-7437 102-7419 102-7420 102-7421

Plug, Cap Screw, Cap Radius Reduction Screw Cap, DT34 Cap, DT34, Effluent Nozzle Base Assembly Intermediate Nozzle, Blue (Used w/ #1 Main) Intermediate Nozzle, Orange (Used w/ #2 Main) Intermediate Nozzle, Red (Used w/ #3 Main) Intermediate Nozzle, Beige (Used w/ #4–5 Mains) Intermediate Nozzle Assy., Red w/ Stream Straightener (Used w/ #6 Main) Intermediate Nozzle Assy., Gray w/ Stream Straightener (Used w/ #7 & #8 Main) Intermediate Nozzle, Brown (Used w/ #7 & #8 main, front position on the right of main) Nozzle Assy. Inner, Yellow Nozzle w/ Yellow Helical Restrictor Nozzle Plug O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 9) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Screen, Riser w/ Check Seal Holder Seal, Check Body, NPT Body, BSP Body, ACME

102-2208 102-5672 102-5673 89-4735

SERVICE ITEMS Nozzle, Main, Blank, White Cap, Blank Cap, Blank, Effluent Yardage Marker, Yellow (10 Sheets per Pak)

995-99 995-105 995-83 995-85 995-102

SERVICE TOOLS Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles and Plugs Multi-purpose Tool Riser Removal Tool Riser Hold-up Tool, Universal

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT34 Series Sprinkler

18 2

3 4

7 6 19

5 8

11 12 20

21 22

14 15

Model Number Information X

DT34 Body Inlet

3—1"

Arc

Body Threads

4—Full circle 0—NPT 4—ACME 5—BSP

Valve Type

Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

31 32 33 34 35 36 37

X Pressure Regulation*

Optional

6—65 psi (4,5 Bar) E–Effluent 8—80 psi (5,5 Bar) DL–Decoder 1—100 psi (6,9 Bar) N–Ni Plated Sol.

For Example: When specifying a DT34 Series Sprinkler with ACME threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: DT34–46–346 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 6 6 6 6 6 6 7 8 9 10 11 12 12 12 12 12 12 12 13 14 15 16 17 18 19 20 20 21 22 23

Part No.

Description

Quantity Per Assy.

89-1589 102-0362 363-4839 102-4752 102-5588 102-5837 102-2925 102-2926 102-2928 102-2929 102-6944 102-6945 102-6883 102-6937 102-4335 102-5978 102-5597 363-4104 102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 89-1385 363-4102 102-0134 102-0151 363-4167 102-0202 102-4503 102-6929 102-1940 102-1715 -----------

Plug, Cap Screw, Cap Radius Reduction Screw Cap, DT34 Cap, DT34, Effluent Nozzle Base Assembly Intermediate Nozzle, Blue (Used w/ #1 Main) Intermediate Nozzle, Orange (Used w/ #2 Main) Intermediate Nozzle, Red (Used w/ #3 Main) Intermediate Nozzle, Beige (Used w/ #4–5 Mains) Intermediate Nozzle Assy., Red w/ Stream Straightener (Used w/ #6 Main) Intermediate Nozzle Assy., Gray w/ Stream Straightener (Used w/ #7 Main) Intermediate Nozzle, Brown (Used w/ #7 main, front position on the right of main) Nozzle Assy. Inner, Yellow Nozzle w/ Yellow Helical Restrictor Nozzle Plug O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 9) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#7 Main Nozzles) Screen, Riser Body Assembly (See p. 102) Pilot Valve Assembly (See p. 109)

102-2208 102-5672 102-5673 89-4735 *DT34-3134 *DT34-3134E *DT34-3537 *DT34-3537E

SERVICE ITEMS Nozzle, Main, Blank, White Cap, Blank Cap, Blank, Effluent Yardage Marker, Yellow (10 Sheets per Pak) Conversion, Full Circle, w/ #31, #32, #33 & #34 Nozzles Conversion, Full Circle, w/ #31, #32, #33 & #34 Nozzles and Effluent (Lavender) Cap Conversion, Full Circle, w/ #35, #36 & #37 Nozzles Conversion, Full Circle, w/ #35, #36 & #37 Nozzles and Effluent (Lavender) Cap-

995-08 995-76 995-15 995-99 995-105 995-83 995-85 995-100 995-102

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles and Plugs Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution System–Minneapolis 13

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT35B Series Sprinkler

1 3

6 7 19

8 21 22

10 9 12

Model Number Information DT35B Body Inlet

3—1"

Arc

Body Threads

5—Full and 0—NPT Part circle 4—ACME 5—BSP

Valve Type

2—Check-O-Matic

XXXX Nozzles

3134 3538

X Optional

E–Effluent

For Example: When specifying a DT35B Series Sprinkler with ACME threads, #34 nozzle, you would specify: DT35B-42-3134 Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 7 8 9 10 11 11 12 12 12 12 13 14 15 16 16 16 16 16 16 16 16 16 17 18 19 19 19 20 21 22 22 22

Part No.

Description

Quantity Per Assy.

363-4839 102-6138 89-1589 102-4752 102-5588 89-4702 363-4102 102-0134 102-0151 102-5730 102-4335 102-5670 102-6531 102-6942 102-5671 102-6884 102-6885 102-5978 102-5597 363-4104 102-2208 102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936 102-4260 363-4236 102-4504 102-6929 102-1939 102-1940 102-5152 102-7437 102-7419 102-7420 102-7421

Radius Reduction Screw Screw, Cap, Black Plug, Cap Cap, DT35 Cap, DT35, Effluent Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return Riser Assembly Nozzle Plug Nozzle Assy. Inner, Yellow w/ White Helical Restrictor (Used w/ #0–#5 Mains) Nozzle Assy., Inner, Green w/ White Helical Restrictor (Used w/ #6, #7 & #8 Mains) Intermediate Nozzle Assy., Beige w/ Stream Straightener (Used w/ #0 Main) Intermediate Nozzle Assy., Brown w/ Stream Straightener (Used w/ #1 Main) Intermediate Nozzle, Yellow (Used w/ #2–#4 Mains) Intermediate Nozzle, Green (Used w/ #5–#8 Mains) O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 13) O-Ring, Main Nozzle Nozzle, Main, #0, Blank (White) Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Screw, Drive Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #0 Main Nozzle) Stator Assembly, Low Flow, Yellow (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Screen, Riser, w/ Check Seal Holder Seal, Check Body, NPT Body, BSP Body, ACME

102-5672 102-5673 89-4735

SERVICE ITEMS Cap, Blank Cap, Blank, Effluent Yardage Marker, Yellow (10 Sheets per Pak)

995-99 995-105 995-83 995-85 995-102

SERVICE TOOLS Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles and Plugs) Multi-purpose Tool Riser Removal Tool Riser Hold-up Tool, Universal

1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT35 Series Sprinkler

1 2

6 7 19

20 8 21

10 9 12

Model Number Information X

DT35 Body Inlet

3—1"

Arc

Body Threads

5—Full and 0—NPT Part circle 4—ACME 5—BSP

Valve Type

Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

30 31 32 33 34 35 36 37

X Pressure Regulation*

Optional

6—65 psi (4,5 Bar) E–Effluent 8—80 psi (5,5 Bar) DL–Decoder 1—100 psi (6,9 Bar) N–Ni Plated Sol.

For Example: When specifying a DT35 Series Sprinkler with ACME threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: DT35–46–346 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 7 8 9 10 11 11 12 12 12 12 13 14 15 16 16 16 16 16 16 16 16 17 18 19 19 19 20 21 22

Part No.

Description

Quantity Per Assy.

363-4839 102-6138 89-1589 102-4752 102-5588 89-4702 363-4102 102-0134 102-0151 102-5730 102-4335 102-5670 102-6531 102-6942 102-5671 102-6884 102-6885 102-5978 102-5597 363-4104 102-2208 102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936 363-4236 102-4504 102-6929 102-1939 102-1940 102-1715 -----------

Radius Reduction Screw Screw, Cap, Black Plug, Cap Cap, DT35 Cap, DT35, Effluent Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return Riser Assembly Nozzle Plug Nozzle Assy. Inner, Yellow w/ White Helical Restrictor (Used w/ #0–#5 Mains) Nozzle Assy., Inner, Green w/ White Helical Restrictor (Used w/ #6 & #7 Mains) Intermediate Nozzle Assy., Beige w/ Stream Straightener (Used w/ #0 Main) Intermediate Nozzle Assy., Brown w/ Stream Straightener (Used w/ #1 Main) Intermediate Nozzle, Yellow (Used w/ #2–#4 Mains) Intermediate Nozzle, Green (Used w/ #5–#7 Mains) O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 13) O-Ring, Main Nozzle Nozzle, Main, #0, Blank (White) Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Screw, Drive Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #0 Main Nozzle) Stator Assembly, Low Flow, Yellow (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#7 Main Nozzles) Screen, Riser Body Assembly (See p. 102) Pilot Valve Assembly (See Pilot Valve Parts Breakout, p. 109

102-5672 102-5673 89-4735 *DT35-3134 *DT35-3134E *DT35-3537 *DT35-3537E

SERVICE ITEMS Cap, Blank Cap, Blank, Effluent Yardage Marker, Yellow (10 Sheets per Pak) Conversion, Part and Full Circle, w/ #31, #32, #33 & #34 Nozzles Conversion, Part and Full Circle, w/ #31–#34 Nozzles and Effluent (Lavender) Cap Conversion, Part and Full Circle, w/ #35, #36 & #37 Nozzles Conversion, Part and Full Circle, w/ #35–37 Nozzles and Effluent (Lavender) Cap

995-08 995-76 995-15 995-99 995-105 995-83 995-85 995-100 995-102

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles and Plugs) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution System–Minneapolis 17

1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT54 Series Sprinkler

OFF

1 4 18 7 6 5 8

11 12 19

8 13

21 14 22

OFF

23 16

Model Number Information X

DT54 Body Inlet

Arc

Body Threads

5—11⁄2" 4—Full-circle 0—NPT 4—ACME 5—BSP

Valve Type

XX Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

51 52 53 54 55 56 57 58 59

X Pressure Regulation*

6—65 psi (4,5 Bar) 8—80 psi (5,5 Bar) 1—100 psi (6,9 Bar)

Optional

E–Effluent DL–Decoder N–Ni Plated Sol.

For Example: When specifying a DT54 Series Sprinkler with ACME threads, #54 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: DT54–46–546 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 6 6 6 6 6 6 7 8 9 10 11 12 12 12 12 12 12 12 12 12 13 14 15 16 17 18 19 20 20 20 21 22 23

Part No.

Description

Quantity Per Assy.

89-1589 102-0362 363-4839 102-4753 102-5589 102-5837 102-2925 102-2926 102-2928 102-2929 102-6944 102-6945 102-6883 102-6937 102-4335 102-5978 102-5597 363-4104 102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 102-4260 102-4259 35-6119 102-0136 363-4103 102-0151 363-4167 102-0203 102-4503 102-6929 102-1940 102-1941 102-1715 -----------

Plug, Cap Screw, Cap Radius Reduction Screw Cap, DT54 Cap, DT54, Effluent Nozzle Base Assembly Intermediate Nozzle, Blue (Used w/ #1 Main) Intermediate Nozzle, Orange (Used w/ #2 Main) Intermediate Nozzle, Red (Used w/ #3 Main) Intermediate Nozzle, Beige (Used w/ #4–5 Mains) Intermediate Nozzle Assy., Red w/ Stream Straightener (Used w/ #6 Main) Intermediate Nozzle Assy., Gray w/ Stream Straightener (Used w/ #7–9 Mains) Intermediate Nozzle, Brown (Used w/ #7 & #8 mains, front position, right of main) Nozzle Assy. Inner, Yellow Nozzle w/ Yellow Helical Restrictor Nozzle Plug O-ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 9) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Nozzle, Main, #9 (Beige) Snap Ring, Riser Retainer, Seal O-Ring, Body Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Stator Assembly, High-Flow, White (Used with #9 Main Nozzles) Screen, Riser Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-2208 102-5674 102-5675 102-0950 *102-5011 89-4735 *DT54-5154 *DT54-5154E *DT54-5558 *DT54-5558E *DT54-59 *DT54-59E

Nozzle, Main, Blank, White Cap, Blank Cap, Blank, Effluent Adapter, Conversion 600/700 1.5" Bodies Adapter,Conversion, 690 Yardage Marker, Yellow (10 Sheets per pak) Conversion, Full Circle, w/ #51, #52, #53 & #54 Nozzles Conversion, Full Circle, w/ #51, #52, #53 & #54 Nozzles and Effluent (Lavender) Cap Conversion, Full Circle, w/ #55, #56, #57 & #58 Nozzles Conversion, Full Circle, w/ #55, #56, #57 & #58 Nozzles and Effluent (Lavender) Cap Conversion, Full Circle, w/ #59 Nozzle Conversion, Full Circle, w/ #59 Nozzle and Effluent (Lavender) Cap

995-09 995-101 995-15 995-99 995-105 995-83 995-85 995-100 995-102

Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles and Plugs) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

SERVICE ITEMS

SERVICE TOOLS

* Order Through Finished Goods Distribution System–Minneapolis 19

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT55 Series Sprinkler

1 TO

OFF

6 7 19

20 8

OFF

22 9 12

Model Number Information DT55 Body Inlet

Arc

Body Threads

5—11⁄2" 5—Full and 0—NPT Part circle 4—ACME 5—BSP

Valve Type

Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

51 52 53 54 55 56 57 58 59

X Pressure Regulation*

Optional

6—65 psi (4,5 Bar) E–Effluent 8—80 psi (5,5 Bar) DL–Decoder 1—100 psi (6,9 Bar) N–Ni Plated Sol.

For Example: When specifying a DT55 Series Sprinkler with ACME threads, #54 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: DT55–46–546 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 7 8 9 10 11 11 12 12 12 13 14 15 16 16 16 16 16 16 16 16 16 17 18 19 19 19 20 21 22

Part No.

Description

Quantity Per Assy.

363-4839 102-6138 89-1589 102-4753 102-5589 35-6119 363-4103 102-0136 102-0151 102-5982 102-4335 102-5670 102-6531 102-6884 102-6885 102-5671 102-5978 102-5597 363-4104 102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936 102-6909 102-4259 363-4236 102-4504 102-1939 102-1940 102-1941 102-1715 -----------

Radius Reduction Screw Screw, Cap, Black Plug, Cap Cap, DT55 Cap, DT55, Effluent Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return Riser Assembly Nozzle Plug Nozzle Assy. Inner Assy., Yellow w/ White Helical Restrictor (Used w/ #1–#5 Mains) Nozzle Assy., Inner Assy., Green w/ White Helical Restrictor (Used w/ #6–#9 Mains) Intermediate Nozzle, Yellow (Used w/ #2, #3 & #4 Mains) Intermediate Nozzle, Green (Used w/ #5–#9 Mains) Intermediate Nozzle Assy., Brown w/ Stream Straightener (Used w/ #1 Main) O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 13) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Nozzle, Main, #9 (Beige) Screw, Drive Drive Assembly, 12-Pack Stator Assembly, Low Flow, Yellow (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Stator Assembly, High-Flow, White (Used with #9 Main Nozzles) Screen, Riser Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-2208 102-5674 102-5675 102-0950 *102-5011 89-4735 *DT55-5154 *DT55-5154E *DT55-5154R *DT55-5154RE *DT55-5558 *DT55-5558E *DT55-5558R *DT55-5558RE *DT55-59 *DT55-59E *DT55-59R *DT55-59RE

SERVICE ITEMS Nozzle, Main, Blank, White Cap, Blank Cap, Blank, Effluent Adapter, Conversion, 600/700 1.5" Bodies Adapter, Conversion, 690 Yardage Marker, Yellow (10 Sheets per Pak) Conversion, Part & Full Circle, w/ #51–#54 Nozzles Conversion, Part & Full Circle, w/ #51–#54 Nozzles and Effluent (Lavender) Cap Conversion, Part & Full Circle, w/ #51–#54 Nozzles for Ribless Bodies Conversion, Part & Full Circle, w/ #51–#54 Nozzles & Effluent Cap for Ribless Bodies Conversion, Part & Full Circle, w/ #55–#58 Nozzles Conversion, Part & Full Circle, w/ #55–#58 Nozzles and Effluent (Lavender) Cap Conversion, Part & Full Circle, w/ #55–#58 Nozzles for Ribless Bodies Conversion, Part & Full Circle, w/ #55–#58 Nozzles & Effluent Cap for Ribless Bodies Conversion, Part & Full Circle, w/ #59 Nozzle Conversion, Part & Full Circle, w/ #59 Nozzle and Effluent (Lavender) Cap Conversion, Part & Full Circle, w/ #59 Nozzle for Ribless Bodies Conversion, Part & Full Circle, w/ #59 Nozzle & Effluent Cap for Ribless Bodies

995-09 995-101 995-15 995-99 995-105 995-83 995-85 995-100 995-102

* Order Through Finished Goods Distribution System–Minneapolis 21

1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

DT55 Series Ribless Body, Conversion Assembly

3 11

10 13

7 6

9 22

Item No. 1 2 3 4 4 5 6 7 8 9 10 11 12 12 13 13 13 14 15 16 17 17 17 17 17 17 17 17 17 18 19 20 20 20 21 22

Part No.

Description

Quantity Per Assy.

89-1589 102-6138 363-4839 102-4753 102-5589 35-6119 89-7568 363-4103 102-0151 89-7569 102-5730 102-4335 102-5670 102-6531 102-5671 102-6884 102-6885 102-5978 102-5597 363-4104 102-6906 102-0726 102-6907 102-0728 102-6955 102-6935 102-6936 102-6909 102-4259 363-4236 102-4504 102-1939 102-1940 102-1941 102-1715 102-0950

Plug, Cap Screw, Cap, Black Radius Reduction Screw Cap, DT55 Cap, DT55, Effluent Snap Ring, Riser Sleeve, Retainer O-Ring Spring, Return Seal, Riser Riser Assembly Nozzle Plug Nozzle Assy. Inner, Yellow w/ White Helical Restrictor (Used w/ #1–#5 Mains) Nozzle Assy., Inner, Green w/ White Helical Restrictor (Used w/ #6–#9 Mains) Intermediate Nozzle Assy., Brown w/ Stream Straightener (Used w/ #1 Main) Intermediate Nozzle, Yellow (Used w/ #2–#4 Mains) Intermediate Nozzle, Green (Used w/ #5–#9 Mains) O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 14) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Nozzle, Main, #9 (Beige) Screw, Drive Drive Assembly, 12-Pack Stator Assembly, Low Flow, Yellow (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Stator Assembly, High Flow, White (Used with #9 Main Nozzle) Screen, Riser Adapter, Conversion

102-5674 102-5675 89-4735 *DT55-5154R *DT55-5154RE *DT55-5558R *DT55-5558RE *DT55-59R *DT55-59RE

SERVICE ITEMS Cap, Blank Cap, Blank, Effluent Yardage Marker, Yellow (10 Sheets per Pak) Conversion, Part & Full Circle, w/ #51–#54 Nozzles for Ribless Bodies Conversion, Part & Full Circle, w/ #51–#54 Nozzles & Effluent Cap for Ribless Bodies Conversion, Part & Full Circle, w/ #55–#58 Nozzles for Ribless Bodies Conversion, Part & Full Circle, w/ #55–#58 Nozzles & Effluent Cap for Ribless Bodies Conversion, Part & Full Circle, w/ #59 Nozzles for Ribless Bodies Conversion, Part & Full Circle, w/ #59 Nozzles & Effluent Cap for Ribless Bodies

995-08 995-76 995-15 995-99 995-105 995-83 995-85 995-100 995-102

* Order Through Finished Goods Distribution System–Minneapolis 23

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

834S Series Sprinkler, Pre-August 2007

Model Number Information 834S-XX-3XX-X Arc 4 = Full-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve

Nozzle

1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

1 2 3 4 5 6 7

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black)

Pressure Regulation*

E = Effluent DL = Decoder

6 = 65 PSI 8 = 80 PSI 1 = 100 PS

N = Nickel Plated

* Pressure Regulation available on Electric VIH models only.

Item No. 1 2 3 3 4 4 4 4 4 4 4 5 6 6 6 6 7 8 9 10 11 12 13 14 15 15 16 17 18

Part No.

Description

Quantity Per Assy.

102-0362 89-1589 102-0230 102-1703 102-0725 102-0726 102-0727 102-0728 102-0729 102-0730 102-4261 102-7406 102-2105 102-2106 102-2107 102-2981 102-2980 89-1385 363-4102 102-0134 102-0151 363-4167 102-0202 102-4503 102-1939 102-1940 102-1715 -----------

Screw, Cap Plug, Cap Cap, 834S Cap, 834S, Effluent Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle Base Kit, Dual Trajectory (Includes Items 1–5, 7–10 on 834S Present Model) Nozzle Assy.Intermediate, Blue (Used with #1 Yellow & #2 Blue Main Nozzles) Nozzle Assy. Intermediate, Orange (Used w/#3 Brown & #4 Orange Main Nozzles) Nozzle Assy. Intermediate, Gray (Used with #5 Green & #6 Gray Main Nozzles) Nozzle Assy. Intermediate, Red (Used with #7 Black Main Nozzle) Nozzle Assy. Inner, Red (with Restrictor) Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, Yellow (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#7 Main Nozzles) Screen, Riser Body Assembly (See p. 102) Pilot Valve Assembly (See p. 109)

102-2208 102-0840 102-2041 102-4337 102-2502 102-2503 89-4735 834S-3134 834S-3134E 834S-3537 834S-3537E

SERVICE ITEMS Nozzle, Main, Blank Nozzle, Inner/ Intermediate, Blank, Red Restrictor, Yellow, Inner Nozzle Stream Straightener, Intermediate Nozzle Cap, 834S, w/o Graphics Cap, 834S, w/o Graphics, Effluent Yardage Marker, Yellow (10 Sheets per Pack) Conversion Assembly, 834S w/ #31, 32, 33, 34 Nozzles, Dual Trajectory Conversion Assembly, 834S w/ #31, 32, 33, 34 Nozzles, Effluent, Dual Trajectory Conversion Assembly, 834S w/ #35, 36, 37 Nozzles, Dual Trajectory Conversion Assembly, 834S w/ #35, 36, 37 Nozzles, Effluent, Dual Trajectory

995-08 995-15 995-76 995-79 995-83 995-85 995-99 995-100 995-102

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Key) Valve Insertion Tool Nut Driver, 7/16" (For Inner & Intermediate Nozzles) Multi-purpose Tool Riser Removal Tool Nut Driver, 5/8" (For Main Nozzle) Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution System—Minneapolis 25

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

834S Series Sprinkler – August 2007–Present

18 2

3 4

7 6 19

5 8

11 12 20

21 22

14 15

Model Number Information X

834S Body Inlet

3—1"

Arc

Body Threads

4—Full circle 0—NPT 4—ACME 5—BSP

Valve Type

Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

31 32 33 34 35 36 37

X Pressure Regulation*

Optional

6—65 psi (4,5 Bar) E–Effluent 8—80 psi (5,5 Bar) DL–Decoder 1—100 psi (6,9 Bar) N–Ni Plated Sol.

For Example: When specifying a 834S Series Sprinkler with ACME threads, #34 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: 834S–46–346 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 6 6 6 6 6 6 7 8 9 10 11 12 12 12 12 12 12 12 13 14 15 16 17 18 19 20 20 21 22 23

Part No.

Description

Quantity Per Assy.

89-1589 102-0362 363-4839 102-5586 102-5590 102-5837 102-2925 102-2926 102-2928 102-2929 102-6944 102-6945 102-6883 102-6937 102-4335 102-5978 102-5597 363-4104 102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 89-1385 363-4102 102-0134 102-0151 363-4167 102-0202 102-4503 102-6929 102-1940 102-1715 -----------

Plug, Cap Screw, Cap Radius Reduction Screw Cap, 834S Cap, 834S, Effluent Nozzle Base Assembly Intermediate Nozzle, Blue (Used w/ #1 Main) Intermediate Nozzle, Orange (Used w/ #2 Main) Intermediate Nozzle, Red (Used w/ #3 Main) Intermediate Nozzle, Beige (Used w/ #4–5 Mains) Intermediate Nozzle Assy., Red w/ Stream Straightener (Used w/ #6 Main) Intermediate Nozzle Assy., Gray w/ Stream Straightener (Used w/ #7 Main) Intermediate Nozzle, Brown (Used w/ #7 main, front position on the right of main) Nozzle Assy. Inner, Yellow Nozzle w/ Yellow Helical Restrictor Nozzle Plug O-Ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 9) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#7 Main Nozzles) Screen, Riser Body Assembly (See p. 102) Pilot Valve Assembly (See p. 109)

102-2208 102-5672 102-5673 89-4735 *834S-3134 *834S-3134E *834S-3537 *834S-3537E

995-08 995-76 995-15 995-99 995-105 995-83 995-85 995-100 995-102

* Order Through Finished Goods Distribution System–Minneapolis 27

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

835B Series Sprinkler 8 9

2 12

10 14

4 5

19 20

Model Number Information X

835B Body Inlet

3—1"

Arc

Body Threads

5—Full and 0—NPT Part circle 4—ACME 5—BSP

Valve Type

2—Check-O-Matic

XXXX Nozzles

3134 3538

X Optional

E–Effluent

For Example: When specifying a DT35B Series Sprinkler with ACME threads, #34 nozzle, you would specify: 835B-42-3134 Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 2 3 4 5 6 7 8 9 9 9 10 11 11 11 11 11 11 11 11 11 12 13 14 15 16 17 17 17 18 19 20 20 20

Part No.

Description

Quantity Per Assy.

102-6138 102-2295 102-2493 89-1385 363-4102 102-0134 102-0151 102-2619 102-5971 102-2925 102-2926 102-2928 102-2910 102-2208 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261 102-4260 363-4104 102-4335 102-2892 363-4236 102-4504 102-6929 102-1939 102-1940 102-5152 102-7437 102-7419 102-7420 102-7421

Screw, Cap, Black Cap, 835S Cap, Effluent, 835S Snap Ring, 1" O-Ring, 1" Retainer Seal, 1" Spring Ratchet Ring, 1" Trajectory Adjuster Intermediate Nozzle, Blue (Use with #1, #5, #6 & #8 Main Nozzles) Intermediate Nozzle, Orange (Use with #3, #4 & #7 Main Nozzles) Intermediate Nozzle, Red (Use with #2 Main Nozzle) Nozzle Assy., Inner Nozzle, Main, #0, White, Blank Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red O-Ring, Main Nozzle Plug, Nozzle, Back Riser Assy. Screw, Drive Drive Assy., 12-Pack Stator Assy, Low Flow, High Velocity, Blue (Use with #0 Main Nozzle) Stator, Low (Use with Main Nozzles 1–4) Stator, Medium (Use with Main Nozzles 5–8) Screen, Riser w/ Check Seal Holder Seal, Check Body, NPT Body, BSP Body, ACME

102-2041 102-4337 102-2494 102-2495

SERVICE ITEMS Restrictor, Yellow, Inner Nozzle Stream Straightener, Intermediate Nozzle Cap, Blank, 835S Cap, Blank, Effluent, 835S

995-83 995-85 995-99 995-105 995-102

SERVICE TOOLS Multi-purpose Tool Riser Removal Tool Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Intermediate, Inner & Back Nozzles) Riser Hold-up Tool, Universal

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

835S Series Sprinkler 8

4 5

Model Number Information 835S-XX-3XX-X Arc 5 = Adj. Part Circle/Full Circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve

Nozzle

1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

1 2 3 4 5 6 7

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black)

Pressure Regulation*

E = Effluent DL = Decoder

5 = 50 PSI 6 = 65 PSI 8 = 80 PSI 1 = 100 PS

N = Nickel Plated

* Pressure Regulation available on Electric VIH models only.

Item No. 1 2 2 3 4 5 6 7 8 9 9 9 10 11 11 11 11 11 11 11 11 12 13 14 15 16 17 17 17 18 19 20

Part No.

Description

Quantity Per Assy.

102-6138 102-2295 102-2493 89-1385 363-4102 102-0134 102-0151 102-2619 102-5971 102-2925 102-2926 102-2928 102-2910 102-2208 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261 363-4104 102-4335 102-2892 363-4236 102-4504 102-6929 102-1939 102-1940 102-1715 -----------

Screw, Cap, Black Cap, 835S Cap, Effluent, 835S Snap Ring, 1" O-Ring, 1" Retainer Seal, 1" Spring Ratchet Ring, 1" Trajectory Adjuster Intermediate Nozzle, Blue (Use with #1, #5 & #6 Main Nozzles) Intermediate Nozzle, Orange (Use with #3, #4 & #7 Main Nozzles) Intermediate Nozzle, Red (Use with #2 Main Nozzle) Nozzle Assy., Inner Nozzle, Main, #0, White, Blank Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black O-Ring, Main Nozzle Plug, Nozzle, Back Riser Assy. Screw, Drive Drive Assy., 12-Pack Stator, Low Flow, High Velocity (Use with Main Nozzle #0) Stator, Low (Use with Main Nozzles 1–4) Stator, Medium (Use with Main Nozzles 5–7) Screen Body Assembly (See p. 102) Pilot Valve Assembly (See p. 109)

102-2041 102-4337 102-2494 102-2495 89-4735 835S-3134 835S-3134E 835S-3537 835S-3537E

SERVICE ITEMS Restrictor, Yellow, Inner Nozzle Stream Straightener, Intermediate Nozzle Cap, Blank, 835S Cap, Blank, Effluent, 835S Yardage Marker, Yellow (10 Sheets per Pack) Conversion Assy., 835S w/ #31, 32, 33, 34 Nozzles Conversion Assy., 835S w/ #31, 32, 33, 34 Nozzles, Effluent Conversion Assy., 835S w/ #35, 36, 37 Nozzles Conversion Assy., 835S w/ #35, 36, 37 Nozzles, Effluent

995-08 995-15 995-76 995-79 995-83 995-85 995-99 995-105 995-100 995-102

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Key) Valve Insertion Tool Nut Driver, 7/16" (For Inner Nozzle) Multi-purpose Tool Riser Removal Tool Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Intermediate, Inner & Back Nozzles) Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

OFF

854S Series Sprinkler, Pre-August 2007

OFF

Model Number Information 854S-XX-5XX-X Arc 4 = Full-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Nozzle 1 2 3 4 5 6 7 8 9

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black) (Red) (Beige)

Pressure Regulation* 6 = 65 PS 8 = 80 PSI 1 = 100 PSI

E = Effluent DL = Decoder N = Nickel Plated

* Pressure Regulation available on Electric VIH models only.

Item No. 1 2 3 3 4 4 4 4 4 4 4 4 4 5 6 6 6 6 7 8 9 10 11 12 13 14 15 15 15 16 17 18

Part No.

Description

Quantity Per Assy.

102-0362 89-1589 102-0231 102-1704 102-0725 102-0726 102-0727 102-0728 102-0729 102-0730 102-4261 102-4260 102-4259 102-7407 102-2105 102-2106 102-2107 102-2981 102-2980 35-6119 363-4103 102-0136 102-0151 363-4167 102-0203 102-4503 102-1939 102-1940 102-1941 102-1715 -----------

Screw, Cap Plug, Cap Cap, 854S Cap, 854S, Effluent Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red Nozzle, Main, #9, Beige Nozzle Base Kit, Dual Trajectory (Includes Item 1–5 and 7–10 found on 854S Present Model) Nozzle Assembly, Intermediate, Blue (Used with #1 Yellow & #2 Blue Main Nozzles) Nozzle Assembly, Intermediate, Orange (Used with #3 Brown & #4 Orange Main Nozzles) Nozzle Assembly, Intermediate, Gray (Used with #5 Green & #6 Gray Main Nozzles) Nozzle Assembly, Intermediate, Red (Used with #7 Black, #8 Red & #9 Beige Main Nozzles) Nozzle assembly, Inner, Red (with Restrictor) Snap Ring, Riser O-Ring, Body Retainer, Seal Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low-flow, Yellow (Use with #1–#4 Main Nozzles) Stator Assembly, Medium-flow, White (Use with #5–#8 Main Nozzles) Stator Assembly, High-flow, White (Use with #9 Main Nozzle) Screen, Riser Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-0840 102-4337 102-2041 102-2504 102-2505 102-0950 89-4735 854S-5154 854S-5154E 854S-5558 854S-5558E 854S-59 854S-59E

SERVICE ITEMS Nozzle, Inner/Intermediate, Blank, Red Stream Straightener, Intermediate Nozzle Restrictor, Yellow, Inner Nozzle Cap, 854S, w/o Graphics Cap, 854S, w/o Graphics, Effluent Adapter, Conversion Yardage Markers, Yellow (10 Sheets per Pack) Conversion Assembly, 854S w/ #51, 52, 53, 54 Nozzles Conversion Assembly, 854S w/ #51, 52, 53, 54 Nozzles, Effluent Conversion Assembly, 854S w/ #55, 56, 57, 58 Nozzles Conversion Assembly, 854S w/ #55, 56, 57, 58 Nozzles, Effluent Conversion Assembly, 854S w/ #59 Nozzle Conversion Assembly, 854S w/ #59 Nozzle, Effluent

995-09 995-101 995-15 995-79 995-99 995-83 995-85 995-100 995-102

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 7/16" (For Inner & Intermediate Nozzles) Nut Driver, 5/8" (For Main Nozzle) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution System–Minneapolis 33

1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

OFF

854S Series Sprinkler – August 2007–Present

17 3

1 4 18 7 6 5 8

11 12 19

8 13

21 14 22

OFF

23 16

Model Number Information X

854S Body Inlet

Arc

Body Threads

5—11⁄2" 4—Full-circle 0—NPT 4—ACME 5—BSP

Valve Type

XX Nozzle

1—NO Hydraulic 2—Check-O-Matic 6—Electric

51 52 53 54 55 56 57 58 59

X Pressure Regulation*

6—65 psi (4,5 Bar) 8—80 psi (5,5 Bar) 1—100 psi (6,9 Bar)

Optional

E–Effluent DL–Decoder N–Ni Plated Sol.

For Example: When specifying a 854S Series Sprinkler with ACME threads, #54 nozzle, an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify: 854S–46–546 * Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 4 4 5 6 6 6 6 6 6 6 7 8 9 10 11 12 12 12 12 12 12 12 12 12 13 14 15 16 17 18 19 20 20 20 21 22 23

Part No.

Description

Quantity Per Assy.

89-1589 102-0362 363-4839 102-5587 102-5591 102-5837 102-2925 102-2926 102-2928 102-2929 102-6944 102-6945 102-6883 102-6937 102-4335 102-5978 102-5597 363-4104 102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 102-4260 102-4259 35-6119 102-0136 363-4103 102-0151 363-4167 102-0203 102-4503 102-6929 102-1940 102-1941 102-1715 -----------

Plug, Cap Screw, Cap Radius Reduction Screw Cap, 854S Cap, 854S, Effluent Nozzle Base Assembly Intermediate Nozzle, Blue (Used w/ #1 Main) Intermediate Nozzle, Orange (Used w/ #2 Main) Intermediate Nozzle, Red (Used w/ #3 Main) Intermediate Nozzle, Beige (Used w/ #4–5 Mains) Intermediate Nozzle Assy., Red w/ Stream Straightener (Used w/ #6 Main) Intermediate Nozzle Assy., Gray w/ Stream Straightener (Used w/ #7–9 Mains) Intermediate Nozzle, Brown (Used w/ #7 & #8 mains, front position, right of main) Nozzle Assy. Inner, Yellow Nozzle w/ Yellow Helical Restrictor Nozzle Plug O-ring, Nozzle Housing Nozzle Housing Assy. (Includes Item 9) O-Ring, Main Nozzle Nozzle, Main, #1 (Yellow) Nozzle, Main, #2 (Blue) Nozzle, Main, #3 (Brown) Nozzle, Main, #4 (Orange) Nozzle, Main, #5 (Green) Nozzle, Main, #6 (Gray) Nozzle, Main, #7 (Black) Nozzle, Main, #8 (Red) Nozzle, Main, #9 (Beige) Snap Ring, Riser Retainer, Seal O-Ring, Body Spring, Return O-Ring, Nozzle Base Riser Drive Assembly, 12-Pack Stator Assembly, Low Flow, High Velocity, Blue (Used with #1–#4 Main Nozzles) Stator Assembly, Medium Flow, White (Used with #5–#8 Main Nozzles) Stator Assembly, High-Flow, White (Used with #9 Main Nozzles) Screen, Riser Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-5674 102-5675 102-0950 *102-5011 89-4735 *854S-5154 *854S-5154E *854S-5558 *854S-5558E *854S-59 *854S-59E

Cap, Blank Cap, Blank, Effluent Adapter, Conversion 600/700 1.5" Bodies Adapter,Conversion, 690 Yardage Marker, Yellow (10 Sheets per pak) Conversion, Full Circle, w/ #51, #52, #53 & #54 Nozzles Conversion, Full Circle, w/ #51, #52, #53 & #54 Nozzles and Effluent (Lavender) Cap Conversion, Full Circle, w/ #55, #56, #57 & #58 Nozzles Conversion, Full Circle, w/ #55, #56, #57 & #58 Nozzles and Effluent (Lavender) Cap Conversion, Full Circle, w/ #59 Nozzle Conversion, Full Circle, w/ #59 Nozzle and Effluent (Lavender) Cap

995-09 995-101 995-15 995-99 995-105 995-83 995-85 995-100 995-102

SERVICE ITEMS

SERVICE TOOLS

* Order Through Finished Goods Distribution System–Minneapolis 35

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

855S Series Sprinkler

8 9

11 ON

2 10

16 4

15 5

18 6

OFF

Model Number Information 835S-XX-3XX-E Arc 5 = Adj. Part Circle/Full Circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve

Nozzle

1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

1 2 3 4 5 6 7 8 9

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black) (Red) (Beige)

Pressure Regulation* 5 6 8 1

= = = =

50 PSI 65 PSI 80 PSI 100 PS

E = Effluent DL = Decoder N = Nickel Plated

* Pressure Regulation available on Electric VIH models only.

Item No. 1 2 2 3 4 5 6 7 8 9 9 9 10 11 11 11 11 11 11 11 11 11 12 13 14 15 16 17 17 17 18 19 20

Part No.

Description

102-6138 102-2296 102-2496 35-6119 363-4103 102-0136 102-0151 102-4967 102-5971 102-2925 102-2926 102-2928 102-2910 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261 102-4260 102-4259 363-4104 102-4335 102-2892 363-4236 102-4504 102-1939 102-1940 102-1941 102-1715 -----------

Screw, Cap, Black Cap, 855S Cap, Effluent, 855S Snap Ring, 1.5" O-Ring, 1.5" Retainer Seal, 1.5" Spring Ratchet Ring, 1.5" Trajectory Adjuster Intermediate Nozzle, Blue (Use with #1, #5, #6, #8 & #9 Main Nozzles) Intermediate Nozzle, Orange (Use with #3, #4 & #7 Main Nozzles) Intermediate Nozzle, Red (Use with #2 Main Nozzle) Nozzle Assy., Inner Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red Nozzle, Main, #9, Beige O-Ring, Main Nozzle Plug, Nozzle, Back Riser Assy. Screw, Drive Drive Assy., 12-Pack Stator, Low (Use with Main Nozzles 1–4) Stator, Medium (Use with Main Nozzles 5–8) Stator, High (Use with Main Nozzle 9) Screen Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-4337 102-2041 102-2497 102-2498 102-0950 89-4735 855S-5154 855S-5154E 855S-5558 855S-5558E 855S-59 855S-59E

SERVICE ITEMS Stream Straightener, Intermediate Nozzle Restrictor, Yellow, Inner Nozzle Cap, Blank, 855S Cap, Blank, Effluent, 855S Adapter, Conversion Yardage Markers, Yellow (10 Sheets per Pack) Conversion Assembly, 855S w/ #51, 52, 53, 54 Nozzles Conversion Assembly, 855S w/ #51, 52, 53, 54 Nozzles, Effluent Conversion Assembly, 855S w/ #55, 56, 57, 58 Nozzles Conversion Assembly, 855S w/ #55, 56, 57, 58 Nozzles, Effluent Conversion Assembly, 855S w/ #59 Conversion Assembly, 855S w/ #59, Effluent

995-09 995-101 995-15 995-99 995-105 995-83 995-85 995-100 995-102

Quantity Per Assy.

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner, Intermediate & Back Nozzles) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution System—Minneapolis 37

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

855S Series Ribless Body, Conversion Assembly

1 2 9 12

14 5

11 15

7 19

8 20

Item No.

Part No.

Nomenclature

Quantity Per Assy.

1 2 2 3 4 5 6 7 8 9 10 10 10 11 12 12 12 12 12 12 12 12 12 13 14 15 16 17 18 18 18 19 20

102-6138 102-2296 102-2496 35-6119 89-7568 363-4103 102-0151 89-7569 102-2619 102-5971 102-2925 102-2926 102-2928 102-2910 102-4587 102-4588 102-4589 102-0728 102-0729 102-0730 102-4261 102-4260 102-4259 363-4104 102-4335 102-2892 363-4236 102-4504 102-1939 102-1940 102-1941 102-1715 102-0950

Screw, Cap, Black Cap, 855S Cap, Effluent, 855S Snap Ring, 1.5" Sleeve, Retainer, O-Ring O-Ring Spring, Return Seal, Riser Ratchet Ring, 1.0" Hex, Trajectory Adjuster Intermediate Nozzle, Blue (Use with #1, #5, #6, #8 & #9 Main Nozzles) Intermediate Nozzle, Orange (Use with #3, #4 & #7 Main Nozzles) Intermediate Nozzle, Red (Use with #2 Main Nozzle) Nozzle Assy., Inner Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Gree Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red Nozzle, Main, #9, Beige O-Ring, Main Nozzle Plug, Nozzle, Back Riser Assy. Screw, Drive Drive Assy., 12-Pack Stator, Low (Use with Main Nozzles 1–4) Stator, Medium (Use with Main Nozzles 5–8) Stator, High (Use with Main Nozzle 9) Screen Adapter, Conversion

102-4337 102-2041 102-2497 102-2498

SERVICE ITEMS Stream Straightener, Intermediate Nozzle Restrictor, Yellow, Inner Nozzle Cap, Blank, 855S Cap, Blank, Effluent, 855S

995-09 995-101 995-15 995-99 995-105 995-83 995-85 995-100 995-102

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 5/8" (For Main Nozzle) Nut Driver, 5/16" (For Inner & Intermediate Nozzles) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

860S Series Sprinkler

Model Number Information 86XS-XX-6XX-E Arc 4 = Full-circle 5 = Part-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Nozzle 1 2 3 4 5 6 7

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black)

Pressure Regulation*

Effluent

6 = 65 PSI 8 = 80 PSI 1 = 100 PSI

* Pressure Regulation available on Electric VIH models only.

Item No. 1 1 2 3 3 4 5 6 7 8 9 10 10 10 10 10 10 10 11 11 11 11 11 12 13 14 15 16 17 18 19 20 20 21 22 23 24 25

Part No.

Description

Quantity Per Assy.

102-1950 363-4125 89-1589 102-1947 102-2082 102-2153 102-0840 363-4039 102-1951 102-1949 363-4104 102-0725 102-0726 102-0727 102-0728 102-0729 102-0730 102-4261 102-0608 102-0609 102-0610 102-0823 102-2005 102-2980 89-1385 363-4102 102-0134 102-0151 89-6360 102-2039 360-0497 102-4499 102-4498 89-1958 89-1957 89-1588 -----------

Screw, Cap, Stainless Steel, Full-circle Models Screw, Cap, Black, Part-circle Models Plug, Cap Cap, 860S Cap, 860S, Effluent Nozzle Base Assembly Nozzle, Inner, Blank, Red Nut, 5/16-24, Nylon Lock Alignment Washer Stream Straightener O-Ring, Main Nozzle Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Intermediate, Orange (Use with #1 Yellow Main Nozzle) Nozzle, Intermediate, Gray (Use with #2 Blue Main Nozzle) Nozzle, Intermediate, Red (Use with #3 Brown & #4 Orange Main Nozzles) Nozzle, Intermediate, Beige (Use with #5 Green & #6 Gray Main Nozzles) Nozzle, Intermediate, Red (Use with #7 Black Main Nozzle) Nozzle Assembly, Inner, Red (w/Restrictor) Snap Ring, Riser O-Ring, Body Retainer, Seal, 1.0" Spring, Return Riser Assembly, 860S Support Washer O-Ring Drive Assembly, PC, (Includes Items 18 & 19), 12-Pack Drive Assembly, FC, (Includes Items 18 & 19), 12-Pack Stator Support Stator, Variable Screen, 860S/880S Body Assembly (See p. 102) Pilot Valve Assembly (See p. 109)

102-2208 102-0840 102-2135 102-2136 363-4220 102-2506 102-2507 89-4735

SERVICE ITEMS Nozzle, Main, Blank, White Nozzle, Inner/Intermediate, Blank, Red Nozzle, Inner, Back, High Flow, White Nozzle, Inner, Back, Low Flow, Yellow Screw, Radius Adjust Cap, 860S, w/o Graphics Cap, 860S, w/o Graphics, Effluent Yardage Marker, Yellow (10 Sheets per Pack)

995-08 995-15 995-76 995-79 995-80 995-82 995-83 995-85 995-99 995-100 995-102

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Key) Valve Insertion Tool Nut Driver, 7/16" (For Inner & Intermediate Nozzles) Nut Driver, 1/2" (For 363-4039 Jam Nut) Arc Adjustment Tool, 3/32" (T-handle hex Wrench) Multi-purpose Tool Riser Removal Tool Nut Driver, 5/8" (For Main Nozzle) Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution Systemâ&#x20AC;&#x201C;Minneapolis

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

OFF

880S Series Sprinkler

1 2 18 3 6 8

19 9

11 12

OFF

Model Number Information 88XS-XX-8XX-E Arc 4 = Full-circle 5 = Part-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Nozzle 1 2 3 4 5 6 7 8

(Yellow) (Blue) (Brown) (Orange) (Green) (Gray) (Black) (Red)

Pressure Regulation*

Effluent

6 = 65 PS 8 = 80 PSI 1 = 100 PSI

* Pressure Regulation available on Electric VIH models only.

Item No. 1 1 2 3 3 4 5 6 7 8 9 10 10 10 10 10 10 10 10 11 11 11 11 11 12 13 14 15 16 17 18 19 20 20 21 22 23 24 25

Part No.

Description

Quantity Per Assy.

102-1950 363-4125 89-1589 102-1948 102-2083 102-2153 102-0840 363-4039 102-1951 102-1949 363-4104 102-0725 102-0726 102-0727 102-0728 102-0729 102-0730 102-4261 102-4260 102-0608 102-0609 102-0610 102-0823 102-2005 102-2980 35-6119 363-4103 102-0136 102-0151 89-6361 102-2039 360-0497 102-4499 102-4498 89-1958 89-1957 89-1588 -----------

Screw, Cap, Stainless Steel, FC Models Screw, Cap, Black PC Models Plug, Cap Cap, 880S Cap, 880S, Effluent Nozzle Base Assembly Nozzle Inner, Blank, Red Nut, 5/16-24, w/Nylon Lock Alignment Washer Stream Straightener O-Ring, Main Nozzle Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red Nozzle, Intermediate, Orange (Used with #1 Yellow Main Nozzle) Nozzle, Intermediate, Gray (Used with #2 Blue Main Nozzle) Nozzle, Intermediate, Red (Used with #3 Brown & #4 Orange Main Nozzles) Nozzle, Intermediate, Beige (Used with #5 Green & #6 Gray Main Nozzles) Nozzle, Intermediate, Red (Used with #7 Black & #8 Red Main Nozzles) Nozzle Assembly, Inner, Red (with Restrictor) Snap Ring, Riser O-Ring, Body Retainer, Seal, 1.5" Spring, Return Riser Assembly, 880S Support Ring O-Ring Drive Assembly, PC (Includes Items 18 & 19), 12-Pack Drive Assembly, FC (Includes Items 18 & 19), 12-Pack Stator Support Stator, Variable Screen, 860S/880S Body Assembly (See p. 106) Pilot Valve Assembly (See p. 109)

102-2208 102-0840 102-2135 102-2136 363-4220 102-2508 102-2509 102-0950 89-4735

SERVICE ITEMS Nozzle, Main, Blank, White Nozzle, Inner/Intermediate, Blank, Red Nozzle, Inner, Back, High Flow, White Nozzle, Inner, Back, Low Flow, Yellow Screw, Radius Adjust Cap, 880S, w/o Graphics Cap, 880S, w/o Graphics, Effluent Adapter, Conversion Yardage Markers, Yellow (10 Sheets per Pack)

995-09 995-101 995-15 995-79 995-99 995-83 995-85 995-100 995-102

* Order Through Finished Goods Distribution Systemâ&#x20AC;&#x201C;Minneapolis

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

880S Series Ribless Body, Conversion Assembly

1 2 19 20

3 6 4

10 16

5 11 12

24 18 25

Item No.

Part No.

Nomenclature

Quantity Per Assy.

1 1 2 3 3 4 5 6 7 8 9 10 10 10 10 10 10 10 10 11 11 11 11 11 12 13 14 15 16 17 18 19 20 21 21 22 23 24 25

102-1950 363-4125 89-1589 102-1948 102-2083 102-0840 102-2153 363-4039 102-1951 102-1949 363-4104 102-0725 102-0726 102-0727 102-0728 102-0729 102-0730 102-4261 102-4260 102-0608 102-0609 102-0610 102-0823 102-2005 102-2980 35-6119 89-7568 363-4103 102-0151 89-7569 89-6360 102-2039 360-0497 102-4499 102-4498 89-1958 89-1957 89-1588 102-0950

Screw, Cap, Stainless Steel, FC Models Screw, Cap, Black PC Models Plug, Cap Cap, 880S Cap, 880S, Effluent Nozzle Inner, Blank, Red Nozzle Base Assembly Nut, 5/16-24, w/Nylon Lock Alignment Washer Stream Straightener O-Ring, Main Nozzle Nozzle, Main, #1, Yellow Nozzle, Main, #2, Blue Nozzle, Main, #3, Brown Nozzle, Main, #4, Orange Nozzle, Main, #5, Green Nozzle, Main, #6, Gray Nozzle, Main, #7, Black Nozzle, Main, #8, Red Nozzle, Intermediate, Orange (Used with #1 Yellow Main Nozzle) Nozzle, Intermediate, Gray (Used with #2 Blue Main Nozzle) Nozzle, Intermediate, Red (Used with #3 Brown & #4 Orange Main Nozzles) Nozzle, Intermediate, Beige (Used with #5 Green & #6 Gray Main Nozzles) Nozzle, Intermediate, Red (Used with #7 Black & #8 Red Main Nozzles) Nozzle Assembly, Inner, Red (with Restrictor) Snap Ring, Riser Sleeve, Retainer, O-Ring O-Ring Spring, Return Seal, Riser Riser Assembly, 860S Support Ring O-Ring Drive Assembly, PC (Includes Items 18 & 19), 12-Pack Drive Assembly, FC (Includes Items 18 & 19), 12-Pack Stator Support Stator, Variable Screen, 860S/880S Adapter, Conversion

102-2208 102-0840 102-2135 102-2136 363-4220 102-2508 102-2509

SERVICE ITEMS Nozzle, Main, Blank, White Nozzle, Inner/Intermediate, Blank, Red Nozzle, Inner, Back, High Flow, White Nozzle, Inner, Back, Low Flow, Yellow Screw, Radius Adjust Cap, 880S, w/o Graphics Cap, 880S, w/o Graphics, Effluent

995-09 995-101 995-15 995-79 995-99 995-83 995-85 995-100 995-102

SERVICE TOOLS Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Nut Driver, 7/16" (For Inner Nozzle) Nut Driver, 5/8" (For Main Nozzle) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover Riser Hold-up Tool, Universal

* Order Through Finished Goods Distribution Systemâ&#x20AC;&#x201C;Minneapolis 45

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

OFF

7 3 4

3 P IN O C P H -U P

730 Series

3 P IN O C P H -U P

13 OFF

7 14

8 18

15 11

12 10

16 9

Model Number Information 734-XX-XXX-E

Arc 4 = Full-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Nozzle 31 32 33 34 35 36 37

Pressure Regulation* 5 6 8 1

= = = =

Effluent

50 PSI 65 PSI 80 PSI 100 PSI

* Pressure Regulation available on Electric VIH models only.

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

Item No. 1 2 3 3 3 3 3 3 3 4 5 6 7 8 9 10 11 12 13 14 15 15 15 16 17 18

Part No.

Description

Quantity Per Assy.

89-1293 89-1589 89-8780 89-8781 89-8782 89-8783 89-8784 89-8785 89-8786 9-4098 102-5003 89-8907 89-1385 363-4167 --------363-4102 89-1386 102-4502 89-1390 89-9636 89-9637 89-9622 89-6495 ---------

Cap Plug, Cap (Black) Nozzle, Main, 31, Yellow (Includes Item 4) Nozzle, Main, 32, Orange (Includes Item 4) Nozzle, Main, 33, Brown (Includes Item 4) Nozzle, Main, 34, Blue (Includes Item 4) Nozzle, Main, 35, Green (Includes Item 4) Nozzle, Main, 36, Red (Includes Item 4) Nozzle, Main, 37, Gray (Includes Item 4) Insert, Nozzle Nozzle Assy., Inner, 31–37, Quad, Red Base Assy., Nozzle (Includes Nozzle Base and Insert Bearing) Snap Ring Seal, O-Ring Riser Assy. (See Service Item 89-7562) Retainer, Spring (See Service Item 89-5979) O-Ring Retainer, Riser Drive Assy., 12-Pack Housing, Stator Stator, Variable, 31–34, Manila Stator, Variable, 35–36, Black Stator, Variable, 37, Green Screen Body Assy. (See p. 100) Pilot Valve Assembly (See p. 108)

102-1870 102-1871 102-1735 102-1736 102-1737 89-5979 89-7562 35-4557 89-4735 89-8289

Nozzle Assy., Less Cap, 734-33 (Includes Items 3–6) Nozzle Assy., Less Cap, 734-34 (Includes Items 3–6) Nozzle Assy., Less Cap, 734-35 (Includes Items 3–6) Nozzle Assy., Less Cap, 734-36 (Includes Items 3–6) Nozzle Assy., Less Cap, 734-37 (Includes Items 3–6) Seal Kit, 730 (Includes Items 10–12) Riser Assy. w/Screen, 730 Svc. (Includes Items 9–12 & 16) Screen, Press-in Type (Pre-9/94) Yardage Marker, Yellow (10 Sheets per Pack) Cap, Effluent

995-15 995-100 995-08 996-76 995-83

SERVICE TOOLS Selector Tool Valve Snap Ring Pliers with Screen Remover Valve Removal Tool Valve Insertion Tool Multi-purpose Tool

SERVICE ITEMS

* Order Through Finished Goods Distribution System–Minneapolis 47

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

760 Series 11

ES KL ER

TU 76 RF 0 S SP ER RI I N

OFF

12 13

14 17

19 4

20 1 3 AU

OFF

T 76 RU F 0 S SP ER RI IES NK LE R

6 15

7 8

10 16

Model Number Information 764-XX-XXX-E Arc 4 = Full-circle 5 = Adj. Part Circle (30–330°)

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve

Nozzle

1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Note: For detailed model number availability and ordering information, refer to the Golf Finished Goods Price List (form no. 490-2844).

62 63 64 65 66 67 68

Pressure Regulation* 5 6 8 1

= = = =

Effluent

50 PSI 65 PSI 80 PSI 100 PSI

* Pressure Regulation available on Electric VIH models only.

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 4 5 5 6 6 6 6 6 6 6 7 7 7 7 7 8 9 9

89-1220 363-3150 363-4039 89-1589 89-1952 89-8287 89-1925 89-1926 89-1927 89-1928 89-1929 89-1930 89-1931 102-2105 102-0608 102-0609 102-0610 102-0823 102-2980 89-1906 102-0057

10 11 12 13 14 15 16 16 17 18 19 20 21

360-0107 89-1385 102-0134 363-4102 89-6307 89-6360 102-4497 102-4496 89-1958 89-1957 89-1588 -----------

Plug, Adjustment Screw, Set, 10-32 x .250 (PC Models Only) Nut, 5/16-24 w/Nylon Lock Plug, Cap Cap, 760 Cap, Effluent Nozzle, Main, 62 Yellow Nozzle, Main, 63 Blue Nozzle, Main, 64 Brown Nozzle, Main, 65 Orange Nozzle, Main, 66 Green Nozzle, Main, 67 Gray Nozzle, Main, 68 Black Nozzle Intermediate, Blue (Use with #62 Yellow and #63 Blue Main Nozzles) Nozzle, Intermediate, Orange (Use with #64 Brown Main Nozzle) Nozzle Intermediate, Gray (Use with #65 Orange Main Nozzle) Nozzle, Intermediate, Red (Use with #66 Green and #67 Gray Main Nozzles) Nozzle, Intermediate, Beige (Use with #68 Main Nozzle) Nozzle Assy., Inner, Red w/Restrictor Nozzle Base Assy., 760/780 Nozzle Base Assy., 760/780 w/Back Nozzle (Includes 89-3729 Nozzle, Inner 85 Orange and 89-4650 Restrictor) O-Ring Snap Ring Retainer, Seal, 1.0" O-Ring, Body Spring, Return Riser Assy., 760 Drive Assy., PC, 12-Pack Drive Assy., FC, 12-Pack Stator Support Stator, Variable Screen, 760/780 Body Assembly (See p. 100) Pilot Valve Assembly (See p. 108)

363-3125 102-0840 89-4651 89-3942 89-4652 89-3729 89-4653 89-1879 89-4654 89-4649 89-4650 89-4735

SERVICE ITEMS Nozzle, Main, Blank, Black Nozzle, Inner/Intermediate, Blank, Red Nozzle, Inner, 62 Yellow (Pre-November 2003) Nozzle, Inner, 63 Blue (Pre-November 2003) Nozzle, Inner, 64 Brown (Pre-November 2003) Nozzle, Inner, 65 Orange (Pre-November 2003) Nozzle, Inner, 66 Green (Pre-November 2003) Nozzle, Inner, 67 Gray (Pre-November 2003) Nozzle, Inner, 68 Black (Pre-November 2003) Restrictor, (62 & 63 Black) (Pre-November 2003) Restrictor, (64-68 White) (Pre-November 2003) Yardage Marker, Yellow (10 Sheets Per Pack)

995-08 995-15 995-55 995-76 995-79 995-80 995-81 995-82 995-83 995-85 995-100

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Tool) Riser Hold-up Tool Valve Insertion Tool Nut Driver, 7/16" (For Inner & Intermediate Nozzles) Nut Driver, 1/2" (For 363-4039 Lock Nut) Nut Driver, 9/16" (For Main Nozzle) Arc Adjustment Tool 3/32" (T-handle Hex Wrench) Multi-purpose Tool Riser Removal Tool Valve Snap Ring Pliers with Screen Remover

* Order Through Finished Goods Distribution Systemâ&#x20AC;&#x201C;Minneapolis

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

650 Series

Model Number Information 65X-XX-XXX Arc §1 §2 §4 §5

Body Threads

= Quarter-circle = Half-circle = Full-circle = Adj. Part-circle (45-315°) 6 = Full-circle, 2-speed, In-line (60-120°) 8 = Full-circle, 2-speed, (180-180°)

Item No.

Part No.

1 2 3 4 5 6 7 7 8 9 10 10 10 10 10 10

3-2095 35-8563 9-5355 3-2510 89-8461 35-6119 ----------35-5846 35-6289 35-7658 35-7659 35-7660 35-7661 35-7662 35-9839

0 = NPT 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Description

Nozzle 54 55 56 57 58 59

Pressure Regulation * 5 6 8 1

= = = =

50 PSI 50 PSI 80 PSI 100 PSI

* Pressure Regulation available on Electric VIH models only. § Pre-1998 models only.

Quantity Per Assy.

Plug, Cap, Rubber Cover Cap Assy., Rubber Cover Rubber cover, Rounded Flange, (See Service Item 650-02) Screw, Machine, 5/16-18 x 11/16" Cap Ring, Snap, Drive Assembly Nozzle Base Assy., 656 (See Service Item 35-7638) Nozzle Base Assy., 658 (See Service Item 35-4853) Retainer, Spring Spring, Nozzle Nozzle, Main, #54 (Includes Item 11) Nozzle, Main, #55 (Includes Item 11) Nozzle, Main, #56 (Includes Item 11) Nozzle, Main, #57 (Includes Item 11) Nozzle, Main, #58 (Includes Item 11) Nozzle, Main, #59

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Item No.

Part No.

Description

Quantity Per Assy.

11 12 12 13 14 15 16 17 17 17 17 17 17 17 17 17 17 17 17 18 18 18

89-5819 89-3942 89-4738 89-4785 9-2735 3-2093 363-4103 89-4772 89-4782 89-4773 89-4783 89-4774 89-1294 89-4775 89-0645 89-4842 89-1295 89-4843 89-1296 9-5187 9-5188 9-5186

18 18 19 20 21

9-5190 9-5192 35-1106 ---------

Insert, Nozzle (Not Used with #59 Nozzle) Nozzle, Inner, Blue Nozzle, Inner, Red Nozzle, Back, Green (658 Models Only) Collar, Spring Plate, Retainer O-Ring, Paraffin, AS-568 234 Drive Assy., 651, 54-57 Nozzles, 90° (Color Coded Green) (Includes Items 14 & 15) Drive Assy., 651, 58-59 Nozzles, 90° (Color Coded Green) (Includes Items 14 & 15) Drive Assy., 652, 54-57 Nozzles, 180° (Color Coded Blue) (Includes Items 14 & 15) Drive Assy., 652, 58-59 Nozzles, 180° (Color Coded Blue) (Includes Items 14 & 15) Drive Assy., 654, 54-57 Nozzles, FC Includes Items 14 & 15) Drive Assy., 654, 58-59 Nozzles, FC (Includes Items 14 & 15) Drive Assy., 655, 54-57 Nozzles, PC 45–315° (Includes Items 14 & 5) Drive Assy., 655, 58-59 Nozzles, PC 45–315° (Includes Items 14 & 15) Drive Assy., 656, 54-57 Nozzles, 2-speed 60–120° (Color Coded Red) (Incl. Items 14 & 15) Drive Assy., 656, 58-59 Nozzles, 2-speed 60–120° (Color Coded Red) (Incl. Items 14 & 15) Drive Assy., 658, 54-57 Nozzles, 2-speed 180–180° (Color Coded Yellow) (Incl. Items 14–15) Drive Assy., 658, 58-59 Nozzles, 2-speed 180–180° (Color Coded Yellow) (Incl. Items 14 & 5) Stator, 34/59 (Used with 651-59, 652-59, 654-59, 655-59, 656-59, & 658-59) Stator, 54 (Used with 651-54, 652-54, 654-54, 655-54, 656-54 & 658-54) Stator, 55/56 (Used with 651-55, 652-55, 654-55, 655-55, 656-55, 658-55, 651-56, 652-56, 654-56, 655-56, 656-56, & 658-56) Stator, 57 (Used with 651-57, 652-57, 654-57, 655-57, 656-57, & 658-57) Stator, 58 (Used with 651-58, 652-58, 654-58, 655-58, 656-58 & 658-58) Screen, Molded Body Assy. (See p. 104) Pilot Valve Assembly (See p. 108)

650-02 35-7638 89-4795 89-4852 89-4853 102-0840 363-3397 363-3398

SERVICE ITEMS Kit, Rubber Cover (Includes Items 1–3) Nozzle Assy., w/o Main Nozzle, 650 (Includes Items 4, 5, 7, 8, 9 and 12) Nozzle Assy., w/o Main Nozzle and Cap, 650 (Includes Items 7, 8, 9 and 12) Nozzle Assy., w/o Main Nozzle, 658 (Includes Items 4, 5, 7, 8, 9, 12 and 13) Nozzle Assy., w/o Main Nozzle and Cap, 658 (Includes Items 7, 8, 9, 12 and 13) Nozzle, Inner/Intermediate, Blank, Red Plug, DA, 7/16", 52-57 Nozzles Plug, DA, 13/16", 58-59 Nozzles

995-09 995-06 995-15 995-16 995-18 995-79 995-83 995-100 995-101

SERVICE TOOLS Valve Removal Tool Drive Assembly Extraction Tool Selector Tool (Flag Key) Riser Pliers Spring Collar Installation Tool Nut Driver 7/16" (For Inner Nozzle) Multi-purpose Tool Valve Snap Ring Pliers with Screen Remover Valve Insertion Tool

* Order Through Finished Goods Distribution System–Minneapolis

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

750 Series RIES ER 7 5 0 SFES P R I N K L TUR

OFF

AUTO

RIES ER 7 5 0 SFES P R I N K L TUR

17 3

18 6

OFF

8 ON

9 11

Model Number Information 754-XX-XXX Arc 4 = Full-circle

Body Threads 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Nozzle 52 53 54 55 56 57 58 59

Pressure Regulation* 5 6 8 1

= = = =

50 PSI 65 PSI 80 PSI 100 PSI

* Pressure Regulation available on Electric VIH models only.

Item No.

Part No.

Description

Quantity Per Assy.

1 1 2 3 4 4 4 4 5 6 6 6 6 7 7 8 9 10 11 12 13 14 15 16 16 16 16 17 18 19

89-4812 89-8290 89-1589 89-8907 89-8781 89-8782 89-8783 89-8969 9-4098 89-8701 89-8702 89-8614 89-8615 89-8715 89-8373 35-6119 363-4167 ----89-1386 ----363-4103 102-4502 89-1390 89-9636 89-9637 89-9622 89-9954 89-6495 ---------

Cap Cap, Effluent Plug, Cap (Black) Nozzle Base Assy. (Includes Nozzle Base and Insert Bearing) Nozzle, Main, 52, Orange, Short (Includes Item 5) Nozzle, Main, 53, Brown, Short (Includes Item 5) Nozzle, Main, 54, Blue, Short (Includes Item 5) Nozzle, Main, 55, Green, Long (Includes Item 5) Insert, Nozzle Nozzle, Main, 56, Red, Long Nozzle, Main, 57, Gray, Long Nozzle, Main, 58, Beige, Long Nozzle, Main, 59, Black, Long Nozzle, Inner, 52–54, Red Nozzle, Inner, 55–59, Black Snap Ring, Head O-Ring Riser Assy. (See Service Item 89-7563) Retainer, Riser Retainer, Spring (See Service Item 89-4352) O-Ring Drive Assy., 12-Pack Housing, Stator Stator, Variable, 754-52–55 (Manila) Stator, Variable, 754-56 (Black) Stator, Variable, 754-57 (Green) Stator, Variable, 754-58–59 (Red) Screen Body Assy. (See p. 104) Pilot Valve Assy. (See p. 108)

89-8916 89-8917 89-8918 89-8919 89-8920 89-8921 89-8922 89-8926 89-4352 89-7563 35-4557 -----89-4735

SERVICE ITEMS Nozzle Assy., 754-52, Orange (Includes Items 1–5 & 7) Nozzle Assy., 754-53, Brown (Includes Items 1–5 & 7) Nozzle Assy., 754-54, Blue (Includes Items 1–5 & 7) Nozzle Assy., 754-55, Green (Includes Items 1–3 & 5-7) Nozzle Assy., 754-56, Red (Includes Items 1–3, 6 & 7) Nozzle Assy., 754-57, Gray (Includes Items 1–3, 6 & 7) Nozzle Assy., 754-58, Beige (Includes Items 1–3, 6 & 7) Nozzle Assy., 754-59, Black (Includes Items 1–3, 6 & 7) Seal Kit, 750 (Includes Items 11–13) Riser Assy. w/Screen (Includes Items 10–13 & 17) Screen, Press-in Type (Pre-9/94 Production) Support, Screen (Use with 35-4557 Screen) Yardage Marker, Yellow (10 Sheets Per Pack)

995-09 995-15 995-55 995-83 995-85 995-101 995-100

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Key) Riser Hold-up Tool Multi-purpose Tool Riser Removal Tool Valve Insertion Tool Valve Snap Ring Pliers with Screen Remover

* Order Through Finished Goods Distribution System–Minneapolis 53

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

780 Series

11 TU 78 RF 0 S SP ER RI IES NK LE R

AUTO

OFF

12 13

14 17

19 20

4 1

3 5

OFF

TU 78 RF 0 S E PS R RIE IN S KL ER

6 15

7 8

10 16

Model Number Information 78X-XX-XXX Arc 4 = Full-circle 5 = Adj. Part Circle (30–330°)

Body 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Nozzle 82 83 84 85 86 87 88 89

Pressure Regulation* 5 6 8 1

= = = =

50 PSI 65 PSI 80 PSI 100 PSI

* Pressure Regulation available on Electric VIH models only.

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 4 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 8 9 9

89-1220 363-3150 363-4039 89-1589 89-1584 89-8288 89-1925 89-1926 89-1927 89-1928 89-1929 89-1930 89-1931 89-4655 102-2105 102-0608 102-0609 102-0610 102-0823 102-2980 89-1906 102-0057

10 11 12 13 14 15 16 16 17 18 19 20 21

360-0107 35-6119 102-0136 363-4103 89-6307 89-6361 102-4497 102-4496 89-1958 89-1957 89-1588 ---------

Plug, Adjustment Screw, Set, 10-32 x 1/4" (PC Only) Nut, 5/16-24 w/Nylon Lock Plug, Cap Cap, 780 Cap, Effluent Nozzle, Main, 82 Yellow Nozzle, Main, 83 Blue Nozzle, Main, 84 Brown Nozzle, Main, 85 Orange Nozzle, Main, 86 Green Nozzle, Main, 87 Gray Nozzle, Main, 88 Black Nozzle, Main, 89 Red Nozzle, Intermediate, Blue (Use with #82 Yellow and #83 Blue Main Nozzles) Nozzle, Intermediate, Orange (Use with #84 Brown Main Nozzle) Nozzle, Intermediate, Gray (Use with #85 Orange Main Nozzle) Nozzle, Intermediate, Red (Use with #86 Green and #87 Gray Main Nozzles) Nozzle, Intermediate, Beige (Use with #88 Black and #89 Red Main Nozzles) Nozzle Assy., Inner, Red w/Restrictor Nozzle Base Assy., 760/780 Nozzle Base Assy., 760/780 w/Back Nozzle (Includes 89-3729 #85 Inner Nozzle and 89-4650 Restrictor) O-Ring Snap Ring Retainer, Seal, 1.5" O-Ring Spring, Return Riser Assy., 780 Drive Assy., PC, 12-Pack Drive Assy., FC, 12-Pack Stator Support Stator, Variable Screen, 760 & 780 Body Assy. (See p. 104) Pilot Valve Assy. (See p. 108)

363-3125 102-0840 89-4651 89-3942 89-4652 89-3729 89-4653 89-1879 89-4654 89-1878 89-4649 89-4650 89-4735

SERVICE ITEMS Nozzle, Main, Blank, Black Nozzle, Inner/Intermediate, Blank, Red Nozzle, Inner, 82 Yellow (Pre-November 2003) Nozzle, Inner, 83 Blue (Pre-November 2003) Nozzle, Inner, 84 Brown (Pre-November 2003) Nozzle, Inner, 85 Orange (Pre-November 2003) Nozzle, Inner, 86 Green (Pre-November 2003) Nozzle, Inner, 87 Gray (Pre-November 2003) Nozzle, Inner, 88 Black (Pre-November 2003) Nozzle, Inner, 89 Red (Pre-November 2003) Restrictor, (82 & 83 Black) (Pre-November 2003) Restrictor, (84–89 White) (Pre-November 2003) Yardage Marker, Yellow (10 Sheets Per Pack)

995-09 995-15 995-55 995-79 995-80 995-81 995-82 995-83 995-85 995-101 995-100

SERVICE TOOLS Valve Removal Tool Selector Tool (Flag Key) Riser Hold-up Tool Nut Driver, 7/16" (For Inner & Intermediate Nozzles) Nut Driver, 1/2" (For 363-4039 Lock Nut) Nut Driver, 9/16" (For Main Nozzle) Arc Adjustment Tool 3/32" (T-handle Hex Wrench) Multi-purpose Tool Riser Removal Tool Valve Insertion Tool Valve Snap Ring Pliers with Screen Remover

* Order Through Finished Goods Distribution System–Minneapolis 55

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1

780 Series Ribless Body Conversion Assembly

11 12 1

2 3

TU 78 R 0S SF P ER RI IES NK LE R

7 8 14

18 15

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 4 5 5 6 6 6 6 6 6 6 6 7 7 7 7 7 8 9

89-1220 363-3150 363-4039 89-1589 89-1584 89-8288 89-1925 89-1926 89-1927 89-1928 89-1929 89-1930 89-1931 89-4655 102-2105 102-0608 102-0609 102-0610 102-0823 102-2980 89-1906

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Item No.

Part No.

Description

Quantity Per Assy.

102-0057

10 11 12 13 14 15 16 16 17 18 19

360-0107 89-7568 363-4103 89-6307 89-7569 89-6360 102-4497 102-4496 89-1958 89-1957 89-1588

Nozzle Base Assy., 760/780 w/Back Nozzle (Includes 89-3729 Nozzle, Inner #85, Orange and 89-4650 Restrictor) O-Ring Sleeve, Retainer, O-Ring, 780 Conversion O-Ring Spring, Return Seal, Riser Riser Assy., 760 Drive Assy., PC, 12-Pack Drive Assy., FC, 12-Pack Stator Support Stator, Variable Screen, 760 & 780

363-3125 102-0840 89-4651 89-3942 89-4652 89-3729 89-4653 89-1879 89-4654 89-1878 89-4649 89-4650

995-09 995-15 995-55 995-79 995-80 995-81 995-82 995-83 995-85 995-101 995-100

* Order Through Finished Goods Distribution System–Minneapolis 57

1 1 1 1 1 1 1 1 1 1 1 1

670 Series

Model Number Information 674-XX-XXX Arc 4 = Full-circle

Body 0 = NPT 4 = ACME 5 = BSP

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Nozzle 70 71 72 73 74

Pressure Regulation * 6 = 65 PSI 8 = 80 PSI 1 = 100 PSI * Pressure Regulation available on Electric and NC VIH models only.

Item No.

Part No.

Description

Quantity Per Assy.

1 2 3 4 5 6 7 8 8 8 8 8 9 10 11 12 13 14 15 16 17 18 19 19 20 21 22 23 24

363-1571 9-5633 9-3735 360-0107 35-0530 9-2793 9-7177 9-7962 9-7963 9-7964 9-7965 9-7966 89-5813 360-0398 9-7407 9-5075 35-6119 9-5055 363-4103 9-3737 9-3874 9-3908 9-4091 9-4529 35-3611 --------9-5355 3-2518

Screw, Machine, 1/4-20 X 2", SST Cap Assy, Rubber Cover Plate, Cap, Insert O-Ring, 0.070" x 0.301" x 0.441" Cap, Sprinkler, 670 Nozzle, "0" Intermediate Nozzle, "F" Inner Ring, Nozzle Assy., #70 (5/16") Ring, Nozzle Assy., #71 (11/32") Ring, Nozzle Assy., #72 (3/8") Ring, Nozzle Assy., #73 (13/32") Ring, Nozzle Assy., #74 (7/16") Straightener, Stream O-Ring, 0.070" x 1.989" x 2.129" Nozzle Base Assy. O-Ring, Housing, Outer Ring, Snap, Head Spring Retainer & Plate Assembly O-Ring, Paraffin AS-568 234 Spring, Return Drive Assy., Outer Housing Drive Assy. (Includes Item 17) Stator, Fixed (Used with #70 & #71 Nozzle) Stator, Variable (Used with #72, #73 & #74 Nozzle) Screen, Debris Body Assy. (See p. 104) Pilot Valve Assy. (See p. 108) Cover, Flange, Rubber Plug, Cap, Rubber

89-0475 9-7415 9-7416 9-7417 9-7418 9-7271 35-3599 670-01

670 Nozzle Assy., #70 (Includes Items 1 & 3–12) 670 Nozzle Assy., #71 (Includes Items 1 & 3–12) 670 Nozzle Assy., #72 (Includes Items 1 & 3–12) 670 Nozzle Assy., #73 (Includes Items 1 & 3–12) 670 Nozzle Assy., #74 (Includes Items 1 & 3–12) Adapter, Tubing (Oversize Thread) Stream Straightener, Debris Resistant Kit, Rubber Cover (Includes Items 2, 23 & 24)

SERVICE ITEMS

SERVICE TOOLS 995-09 995-15 995-83 995-100 995-101

Valve Removal Tool Selector Tool (Flag Key) Multi-purpose Tool Valve Snap Ring Pliers with Screen Remover Valve Insertion Tool

2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

690 Series

16 17

18 19 27

10 5

8 9

9 11

26 14 23

12 13

21 22

Model Number Information 69X-XX-XXX Arc 1 2 4 6

= = = =

Body Threads

90° Quarter-circle 180° Half-circle Full-circle Full-circle, 2-speed, (60°–120°) 8 = Full-circle, 2-speed, (180°–180°) A = 150° B = 165° C = 195° D = 210°

Item No. 1 2 3 4 5

0 = NPT

Valve 1 = NO Valve-In-Head 2 = Check-O-Matic 6 = Electric Valve-In-Head

Part No.

Description

3-2518 3-3567 3-3582 3-3532 9-2734

Plug, Cap , Rubber Screw, Machine, 1/4-20 x3/8" Cover, Cap, Rubber Cap Strap, Spring

Nozzle 90 91 92

Pressure Regulation * 8 = 80 PSI 1 = 100 PSI

* Pressure Regulation available on Electric & NC VIH models only.

Quantity Per Assy. 1 1 1 1 1 60

Item No. 6 7 7 7 8 9 9 10 11 12 13 13 13 13 13 13 13 13 13 14 15 15 15 16 17 17 18 18 19 19 19 20 21 22 23 24 25 26 27

Part No. 9-2738 89-5816 3-3542 3-3543 3-3535 3-3531 9-1079 9-5535 3-3536 363-3210 9-1849 9-1850 3-3585 35-5123 3-3549 89-8145 89-8146 89-8147 89-8148 9-2736 3-3586 3-3568 3-3555 3-3304 9-1479 102-0626 3-3311 3-3323 89-1201 3-3355 102-6311 -----9-6002 *89-8157 *900-40 9-2624 -----3-2696 3-3581 3-3529 2-9647 3-3579 89-4861 89-4873 89-1019 3-3558 89-1038 9-1497 89-4879 -----9-4079 9-4080 9-4081 9-4083 9-4084 9-4085 9-5747 9-2669 690-01 9-7271 995-06 995-100 995-09 995-12 995-15 995-17 995-20 995-22 995-49 995-50 995-51 995-100

Description

Quantity Per Assy.

Spring, Retraction Nozzle, Main, 3/8", #90 Nozzle, Main, 7/16", #91 Nozzle, Main, 1/2", #92 Straightener, Stream Base, Nozzle, Full-circle Base, Nozzle, Part-circle Nozzle, Back Snap Ring, Head O-Ring, 0.139" x 4.359" x 4.637" Drive Assy., Quarter-circle, 691 (Includes Item 14) Drive Assy., Half-circle, 692 (Includes Item 14) Drive Assy., Full-circle, 694 (Includes Item 14) Drive Assy., 696, 2-Speed, 60°-120° (Includes Item 14) Drive Assy., 698, 2-Speed 180° (Includes Item 14) Drive Assy., 150° (Includes Item 14) Drive Assy., 165° (Includes Item 14) Drive Assy., 195° (Includes Item 14) Drive Assy., 210° (Includes Item 14) Collar, Spring Stator, 3/8", #90 Stator, 7/16", #91 Stator, 1/2", #92 Snap Ring, Valve Cylinder Assy., NO, COM & Drain Valve Cylinder Assy., El & NC Spring, Valve, COM Spring, Valve, EL, NO, NC & Drain Valve Piston Assy., Valve, NO & COM Piston Assy., Valve, Drain Piston Assy., Valve, El & NC Body, 690 (See Service Items) Adapter, Tubing, Threaded, 1/4" Cap, Poly, 1/4" Retainer, Tube Tubing, Poly 1/4" x 16.5" Pilot Valve Assy. (See p. 108) Screw, Tap, #8 Cover, Body, Rubber SERVICE ITEMS Cap Assy., Rubber Cover (Includes Items 3 & 4) Screw, Machine, #10-24 x 1.5" Body, Electric w/o/VIH (Includes Items 20–23) Body, Electric w/VIH (Includes Items 16–23) Body, Electric w/VIH, 80 psi. PV (Includes Items 16–21 and 23–26) Body, Electric w/VIH, 100 psi. PV (Includes Items 16–21 and 23–26) Body, Hydraulic NO w/o/VIH (Includes Items 20–23) Body, Hydraulic NO w/VIH (Includes Items 16–23) Body, COM w/o/VIH (Includes Items 20, 21, 23 and 24) Body, COM w/VIH (Includes Items 16–21, 23 and 24) Pilot Valve Assy., 100 Lbs. w/Tubing (includes Items 21& 23–26) Nozzle Assy., 690-90 (Includes Items 7–10) Nozzle Assy., 690-91 (Includes Items 7–10) Nozzle Assy., 690-92 (Includes Items 7–10) Nozzle Assy., 694-90 (Includes Items 7–10) Nozzle Assy., 694-91 (Includes Items 7–10) Nozzle Assy., 694-92 (Includes Items 7–10) Nozzle Base Assy., 690, Dual Back Nozzles (Front & Back) Retraction Assy., Spring (Includes Items 5, 6, 11 & 14) Kit, Cover, Rubber (Includes Items 1, 3 & 27) Adapter, Tubing, Oversized Thread SERVICE TOOLS Drive Assy. Extraction Tool Valve Snap Ring Pliers Valve Removal Tool Valve Insertion Tool Selector Tool (Flag Key) Riser Pliers Valve Insertion Tool, Rubber Cover Hose Adapter *Pressure Gauge Pilot Tube Pressure Gauge Kit Valve Snap Ring Pliers with Screen Remover * Order Through Finished Goods Distribution System–Minneapolis 61

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1

Golf Sprinkler Body — 1 Inch

7 11 9 8 3

Item No.

Part No.

Description

Quantity Per Assy.

1 1 1 1 1 1 1

35-9421 **89-4128 102-0083 35-9418 **89-4126 35-9453 **89-4127

1 INCH NPT BODY STYLE Electric w/o VIH (Includes Items 1–4) Electric w/o VIH, Ribless (Includes Items 1–4) Electric w/VIH, 720 (Includes Items 1–9) Hydraulic NO w/o VIH (Includes Items 1–4) Hydraulic NO w/o VIH, Ribless (Includes Items 1–4) COM w/o VIH (Includes Items 1–3 & 12) COM w/o VIH, Ribless (Includes Items 1–3 & 12)

1 1 1 1 1 1 1

35-9386 **89-4131 102-0084 35-9385 **89-4129 35-9294 **89-4130

1 INCH BSP BODY STYLE Electric w/o VIH (Includes Items 1–4) Electric w/o VIH, Ribless (Includes Items 1–4) Electric w/VIH, 720 (Includes Items 1–9) Hydraulic NO w/o VIH (Includes Items 1–4) Hydraulic NO w/o VIH, Ribless (Includes Items 1–4) COM w/o VIH (Includes Items 1–3 & 12 COM w/o VIH, Ribless (Includes Items 1–3 & 12)

1 1 1 1 1 1 1

**Note: Ribless bodies are used with sprinklers manufactured prior to July 1993. 62

Item No.

1 1 1 1 2 3 4 5 6 6 7 7 8 8 8 9 10 11 12 12

Part No.

Description

Quantity Per Assy.

89-8635 102-0085 89-8643 89-8641 9-6002 *900-40 89-8157 89-4702 9-1485 9-1487 3-2633 89-5821 89-1044 89-1054 102-0081 35-9646 -----3-2696 9-2622 9-1876

1 INCH ACME BODY STYLE 1" ACME Body Style, Electric w/o VIH (Includes Items 1–4) 1" ACME Body Style, Electric w/VIH, 720 (Includes Items 1–9) 1" ACME Body Style, Hydraulic NO w/o VIH (Includes Items 1–4) 1" ACME Body Style, COM w/o VIH (Includes Items 1–3 & 12) Adapter, Tubing, Threaded, 1/4" Retainer, Tube Cap, Poly Snap Ring, Valve Cylinder Assy., NO & COM Cylinder Assy., EL & NC Spring, Valve, NO, EL & NC Spring, Valve, COM Piston Assy., NO & COM Piston Assy., EL & NC, (Includes Item 9) Piston Assy., EL (720 Only) (Includes Item 9) Filter Assy., Metering, EL & NC Pilot Valve Assy. (See p. 108) Screw, Tap #8 Tubing, Poly, 1/4" x 6 1/4", EL & NC Tubing, Poly, 1/4" x 12", COM

89-1046 89-1047 89-1048 102-0082 9-7271

SERVICE ITEMS Valve Assy., NO (Includes Items 6–8) Valve Assy., COM (Includes Items 6–8) Valve Assy., EL, NC (Includes Items 6–9) Valve Assy., EL, 720 (Includes Items 6–9) Adapter, 1/4" Poly (Oversize Thread)

* Order Through Finished Goods Distribution System–Minneapolis 63

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1

Golf Sprinkler Body — 1 Inch – 800S & DT Series

7 13

OFF

8 10

3 11

Item No.

Part No.

Description

Quantity Per Assy.

1 1 1

102-1090 102-1084 102-1078

1 INCH NPT BODY STYLE Electric w/o VIH (Includes Items 1–2) Hydraulic NO w/o VIH (Includes Items 1–2) COM w/o VIH (Includes Items 1–3 & 5)

1 1 1

102-1092 102-1086 102-1080

1 INCH BSP BODY STYLE Electric w/o VIH (Includes Items 1–2) Hydraulic NO w/o VIH (Includes Items 1–2) COM w/o VIH (Includes Items 1–3 & 5)

1 1 1

102-1094 102-1088 102-1082

1 INCH BSP BODY STYLE 1" ACME Body Style, Electric w/o VIH (Includes Items 1–2) 1" ACME Body Style, Hydraulic NO w/o VIH (Includes Items 1–2) 1" ACME Body Style, COM w/o VIH (Includes Items 1–3 & 5)

1 1 1

Item No. 2 3 4 5 5 6 7 8 8 9 10 11 11 12 13 14

Part No.

Description

Quantity Per Assy.

9-6002 *900-40 89-8157 9-2623 9-1876 89-4702 102-0623 3-2633 89-5821 35-9646 102-6529 102-6314 89-1054 102-0784 -----3-2696

Adapter, Tubing, Threaded, 1/4" Retainer, Tube Cap, Poly Tubing, Poly, 1/4" x 8", EL Tubing, Poly, 1/4" x 12", COM Snap Ring, Valve Cylinder Assy., EL & NO/COM Spring, Valve, NO/EL, Silver Spring, Valve, COM, Black Filter Assy., Metering, EL Filter Assy., Non-Metering, NO/COM Piston Assy., NO & COM (Includes Item 10) Piston Assy., EL (Includes Item 9) Rock Screen, 1" Pilot Valve Assy. (See p. 109) Screw, Tap #8

102-6313 102-6312 102-0624

SERVICE ITEMS Valve Assy., NO (Includes Items 7, 8, 10 & 11) Valve Assy., COM (Includes Items 7, 8, 10 & 11) Valve Assy., EL, NC (Includes Items 7–9, & 11)

* Order Through Finished Goods Distribution System–Minneapolis 65

1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2

Golf Sprinkler Body — 1.5 Inch 5

1 6

11 9

2 4

Item No.

Part No.

Description

Quantity Per Assy.

1 1 1

3-3389 3-3343 9-1257

1.5 INCH NPT BODY STYLE Electric w/o VIH (Includes Items 1–4) Hydraulic NO w/o VIH (Includes Items 1–4) COM w/o VIH (Includes Items 1–3 & 13)

1 1 1

35-5362 35-5322 35-5245

Electric w/o VIH (Includes Items 1–4) COM w/o VIH (Includes Items 1–3 & 13) Hydraulic NO w/o VIH (Includes Items 1–4)

1 1 1

89-8646 89-8652 89-8654

1 1 1

1.5 INCH BSP BODY STYLE 1 1

1.5 INCH ACME BODY STYLE Electric w/o VIH (Includes Items 1–4) COM w/o VIH (Includes Items 1–3 & 13) Hydraulic NO w/o VIH (Includes Items 1–4)

1 1 1

Item No. 2 3 4 5 6 6 7 7 8 8 9 10 11 12 13 13

Part No. 9-6002 *900-40 89-8157 3-3304 9-1479 102-0626 3-3323 3-3311 89-1201 102-5101 35-9645 35-7663 -----3-2696 9-2623 9-1876

Description

Quantity Per Assy.

Adapter, Tubing, Threaded, 1/4" Retainer, Tube Cap, Poly Snap Ring, Valve Cylinder Assy., COM & NO Cylinder Assy., EL & NC Spring, Valve, EL, NO, & NC, Silver Spring, Valve, COM, Black Piston Assy., COM & NO Piston Assy., EL & NC (Includes Item 9) Filter Assy., Metering, EL & NC Adapter, Pilot Valve to Body Pilot Valve Assy. (See p. 108) Screw, Tap #8 Tubing, Poly, 1/4" x 8", EL & NC Tubing, Poly, 1/4" x 11.5", COM SERVICE ITEMS

89-1036 89-1037 102-4003 9-7271

Valve Assy., NO (Includes Items 6–8) Valve Assy., COM (Includes Items 6–8) Valve Assy., EL and NC (Includes Items 6–9) Adapter, 1/4" Poly (Oversize Thread)

* Order Through Finished Goods Distribution System–Minneapolis 67

1 1 or 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1

Golf Sprinkler Body — 1.5 Inch – 800S & DT Series

1 7

8 13 OFF

3 12 2 4

Item No.

Part No.

Description

Quantity Per Assy.

1 1 1

102-1149 102-1143 102-1137

1.5 INCH NPT BODY STYLE Electric w/o VIH (Includes Items 1–2) Hydraulic NO w/o VIH (Includes Items 1–2 COM w/o VIH (Includes Items 1–3 & 5)

1 1 1

102-1151 102-1139 102-1145

Electric w/o VIH (Includes Items 1–2) COM w/o VIH (Includes Items 1–3 & 5) Hydraulic NO w/o VIH (Includes Items 1–2)

1 1 1

102-1153 102-1141 102-1147

1 1 1

1.5 INCH BSP BODY STYLE 1 1

1.5 INCH ACME BODY STYLE Electric w/o VIH (Includes Items 1–2) COM w/o VIH (Includes Items 1–3 & 5) Hydraulic NO w/o VIH (Includes Items 1–2)

1 1 1

Item No. 2 3 4 5 5 6 7 8 8 9 10 11 11 12 13 14

Part No. 9-6002 *900-40 89-8157 9-2623 9-2624 3-3304 102-0626 3-3323 3-3311 35-9645 102-6530 102-6311 102-5101 102-0785 -----3-2696

Description

Quantity Per Assy.

Adapter, Tubing, Threaded, 1/4" Retainer, Tube Cap, Poly Tubing, Poly, 1/4" x 8", EL Tubing, Poly, 1/4" x 14", COM Snap Ring, Valve Cylinder Assy., EL & NO/COM Spring, Valve, EL/NO, Silver Spring, Valve, COM, Black Filter Assy., Metering, EL & NC Filter Assy., Non-Metering, NO/COM Piston Assy., COM & NO (Includes Item 10) Piston Assy., EL (Includes Item 9) Rock Screen, 1.5" Pilot Valve Assy. (See p. 109) Screw, Tap #8 SERVICE ITEMS

102-6310 102-6309 102-4003

Valve Assy., NO (Includes Items 7, 8, 10 & 11) Valve Assy., COM (Includes Items 7, 8, 10 & 11) Valve Assy., EL (Includes Items 7–9 & 11)

* Order Through Finished Goods Distribution System–Minneapolis 69

1 1 or 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2

Pilot Valve

Item No.

Part No.

1 1 1 2 3 4 5 6 6 7 8 9 10 11 11 11 11 12 13

102-6316 102-6318 102-2709 118-0248 89-6005 89-0001 360-0220 102-2110 102-7690 89-6003 102-0343 1-2035 102-7723 35-9970 35-9971 35-9972 35-9973 89-0029 89-0005

Description

Quantity Per Assy.

Solenoid, Low Wattage, w/Surge Protection (Black Wires) Solenoid, Low Wattage, w/Surge Protection, Nickel PLated (Red Wires) Solenoid, Low Wattage, 2-Wire Dec., w/Surge Protection (Red w/ Wht. & Blk wires) Solenoid, 600/700 Series (Red & Black Wires) Adapter, Pilot Valve, NC Housing, Pilot Valve O-Ring, 0.070" x 0.551" x 0.691" Plunger Assy., EL, Saltwater Tolerant Plunger Assy., EL Plunger Assy., NC Selector Cam, Black (Includes Item 9) O-Ring, 0.070" x 0.114" x 0.254" Body Assy., Pilot Valve (Cross-reference with New Pilot Valve Assy. w/o Solenoid) Spring, 50 psi, Black Spring, 65 psi, Green Spring, 80 psi, Red Spring, 100 psi, Blue Piston Diaphragm Assy. See Pilot Valve Assemblies with Adjustable Pressure.

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Pilot Valve, Adjustable Pressure 15 9

10 13

8 11

12 16

7 5

2 6

Item No. 1 2 2 2 3 4 5 5 6 7 8 9 9 10 11 12 13 14 15 16 17 18

Part No.

Description

102-2709 102-6316 102-6318 102-4979 118-0248 89-6005 102-2110 102-7690 89-6003 360-0220 102-4747 102-0343 102-4831 1-2035 102-2237 102-2236 102-2235 102-2469 102-2473 102-2238 102-2606 363-4441

Solenoid, DC Latching, 2-Wire Decoder (Red w/White Stripe and Black Wires) Solenoid, Low Wattage, w/Surge Protection (Black Wires) Solenoid, Low Wattage, w/Surge Protection Nickel Plated (Red Wires) Solenoid, 3-Wire Decoder, w/Surge Protection (Yellow Wires) Solenoid, DT Series, 600/700 Series (Red and Black Wires) Adapter, Pilot Valve, NC Plunger Assy., EL, Nickel Plated Plunger Assy., EL Plunger Assy., NC O-Ring, 0.070" x 0.551" x 0.254" Body Assy., Pilot Valve Selector Cam, Black (Includes item 10) Selector Cam, Red (Includes item 10) O-Ring, 0.070" x 0.114" x 0.254" Adjuster, PSI Traveling Nut Spring Piston Diaphragm Assy. Housing, Pilot Valve Adjustment Locator Nut, Adjuster

102-5975 102-5974 102-5178 102-5181 102-5976 102-5977 102-6533

Quantity Per Assy.

SERVICE ITEMS Pilot Valve Assy., Selectable Pressure Less Solenoid, Use w/All Electric Pilot Valve except Nickel Plated (Includes Items 5[102-7690] & 7–18) Pilot Valve Assy., Selectable Pressure w/Low Watt/High Surge Solenoid 800S Series (Includes Items 2[102-3443], 5[102-7690] & 7–18) Pilot Valve Assy., Selectable Pressure w/Standard Watt & Surge Solenoid, 600/700 Series (Includes Items 3, 5[102-7690] & 7–18) Pilot Valve Assy., Selectable Pressure w/Normally Closed Actuator (Includes Items 4 & 6–18) Pilot Valve Assy., Selectable Pressure w/Low Watt/High Surge Nickel Plated (Includes Items 2[102-0312], 5[102-2110] & 7–18) Pilot Valve Assy., Selectable Pressure w/Standard Watt/High Surge, 3-Wire Decoder (Includes Items 2[102-4979], 5[102-7690] & 7–18) Pilot Valve Assy., Selectable Pressure w/DC Latching Solenoid, 2-Wire Decoder (Includes Items 1, 5 [102-7690] & 7–18) 71

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

The Toro Company • Irrigation Division • An ISO 9000-certified Company P.O. Box 489 • Riverside, CA 92502-0489 • (800) 664-4740 • www.toro.com