Nozzle
SYSTEMIC NOZZLES
1
EXCELLENT
YOUR SPRAYER
SELECT THE FILTER THAT FITS THE NOZZLE • 80 mesh • 50 mesh • 30 mesh
•
Pre-Emergence
•
O
M
2
VERY GOOD
Toro Part Number
GOOD
Fungicides
•
Insecticides
•
Liquid Fertilizer
•
Drift
•
CONTACT NOZZLES A
N
Y
B
O
O
VERY GOOD
95-9222
1/4 Thread .4 GPM, Red
95-9223
1/4 Thread .5 GPM, Brown
95-9224
1/4 Thread .6 GPM, Gray
95-9225
1/4 Thread .8 GPM, White
95-9188
1/4 Thread 1.0 GPM, Light Blue
95-9226
1/4 Thread 1.5 GPM, Light Green
•
•
contact/high-pressure
systemic/low-pressure
• systemic/low-pressure
•
•
contact/high-pressure
systemic/low-pressure
•
•
systemic/low-pressure
contact/high-pressure
Toro Part Number
94-8714
94-8715
4.5 0.24 0.26 0.30 0.33 0.36 0.41 0.48 0.53 0.60 0.68 0.74 0.83 0.60 0.65 0.76 0.85 0.92 1.03 0.71 0.79 0.91 1.01 1.10 1.24 0.95 1.04 1.21 1.34 1.48 1.66 1.19 1.31 1.51 1.69 1.84 2.07 1.80 1.96 2.27 2.54 2.78 3.10
5 0.22 0.23 0.27 0.30 0.33 0.37 0.44 0.48 0.54 0.61 0.67 0.75 0.54 0.58 0.68 0.76 0.83 0.92 0.64 0.71 0.82 0.91 0.99 1.12 0.86 0.94 1.09 1.21 1.33 1.50 1.07 1.18 1.36 1.52 1.66 1.86 1.62 1.77 2.04 2.28 2.50 2.79
5.5 0.20 0.21 0.25 0.27 0.30 0.33 0.40 0.43 0.49 0.56 0.61 0.68 0.49 0.53 0.62 0.69 0.75 0.84 0.58 0.64 0.74 0.83 0.90 1.01 0.78 0.85 0.99 1.10 1.21 1.36 0.98 1.08 1.24 1.38 1.51 1.69 1.47 1.61 1.85 2.08 2.27 2.53
6 0.18 0.19 0.23 0.25 0.27 0.31 0.36 0.40 0.45 0.51 0.56 0.62 0.45 0.49 0.57 0.63 0.69 0.77 0.53 0.59 0.68 0.76 0.83 0.93 0.71 0.78 0.91 1.01 1.11 1.25 0.90 0.99 1.13 1.27 1.38 1.55 1.35 1.47 1.70 1.90 2.09 2.32
Extended Range, 110 degrees, .5 GPM, Brown
94-8717
Description
80 mesh
50 mesh
30 mesh
Part Number
100-6992
100-8642
100-6991
Extended Range, 110 degrees, .6 GPM, Gray Extended Range, 110 degrees, .8 GPM, White Extended Range, 110 degrees, 1.0 GPM, Stainless Extended Range, 110 degrees, 1.5 GPM, Stainless
Pressure (PSI) 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60
Capacity 1 Nozzle (GPM) 0.28 0.35 0.40 0.45 0.49 0.35 0.43 0.50 0.56 0.61 0.42 0.52 0.60 0.67 0.73 0.57 0.69 0.80 0.89 0.98 0.71 0.87 1.00 1.12 1.22 1.06 1.30 1.50 1.68 1.84
First Gear 2.5 0.76 0.95 1.09 1.22 1.33 0.95 1.17 1.36 1.52 1.66 1.14 1.41 1.63 1.82 1.99 1.55 1.88 2.18 2.42 2.67 1.93 2.37 2.72 3.05 3.32 2.88 3.54 4.08 4.57 5.00
3 0.63 0.79 0.91 1.02 1.11 0.79 0.97 1.13 1.27 1.38 0.95 1.18 1.36 1.52 1.65 1.29 1.56 1.81 2.02 2.22 1.61 1.97 2.27 2.54 2.77 2.40 2.95 3.40 3.81 4.17
NOTE: Lower pressures produce larger droplets and will help reduce mist under the covered boom.
3.5 0.54 0.68 0.78 0.87 0.95 0.68 0.84 0.97 1.09 1.19 0.82 1.01 1.17 1.30 1.42 1.11 1.34 1.55 1.73 1.90 1.38 1.69 1.94 2.18 2.37 2.06 2.53 2.91 3.26 3.57
Second Gear Speed (MPH) 4 0.48 0.60 0.68 0.77 0.83 0.60 0.73 0.85 0.95 1.04 0.71 0.88 1.02 1.14 1.24 0.97 1.17 1.36 1.51 1.67 1.21 1.48 1.70 1.90 2.07 1.80 2.21 2.55 2.86 3.13
Third Gear 4.5 0.42 0.53 0.60 0.68 0.74 0.53 0.65 0.76 0.85 0.92 0.63 0.79 0.91 1.01 1.10 0.86 1.04 1.21 1.34 1.48 1.07 1.31 1.51 1.69 1.84 1.60 1.96 2.27 2.54 2.78
5 0.38 0.48 0.54 0.61 0.67 0.48 0.58 0.68 0.76 0.83 0.57 0.71 0.82 0.91 0.99 0.78 0.94 1.09 1.21 1.33 0.97 1.18 1.36 1.52 1.66 1.44 1.77 2.04 2.28 2.50
5.5 0.35 0.43 0.49 0.56 0.61 0.43 0.53 0.62 0.69 0.75 0.52 0.64 0.74 0.83 0.90 0.70 0.85 0.99 1.10 1.21 0.88 1.08 1.24 1.38 1.51 1.31 1.61 1.85 2.08 2.27
6 0.32 0.40 0.45 0.51 0.56 0.40 0.49 0.57 0.63 0.69 0.48 0.59 0.68 0.76 0.83 0.65 0.78 0.91 1.01 1.11 0.80 0.99 1.13 1.27 1.38 1.20 1.47 1.70 1.90 2.09
30 mesh
3
NOZZLE FILTERS
94-8719
40998
3.5 0.31 0.33 0.39 0.43 0.47 0.52 0.62 0.68 0.78 0.87 0.95 1.07 0.78 0.84 0.97 1.09 1.19 1.32 0.91 1.01 1.17 1.30 1.42 1.59 1.22 1.34 1.55 1.73 1.90 2.14 1.53 1.69 1.94 2.18 2.37 2.66 2.31 2.53 2.91 3.26 3.57 3.98
50 mesh
94-8716
94-8718
94-8720
Extended Range, 110 degrees, .4 GPM, Red
contact/high-pressure
TO FILL ALL THREE NOZZLES
Contact Nozzles
Nozzle Description & Color Code
•
Drift
40998
3 0.36 0.39 0.45 0.50 0.54 0.61 0.73 0.79 0.91 1.02 1.11 1.25 0.91 0.97 1.13 1.27 1.38 1.54 1.07 1.18 1.36 1.52 1.65 1.86 1.43 1.56 1.81 2.02 2.22 2.49 1.79 1.97 2.27 2.54 2.77 3.11 2.70 2.95 3.40 3.81 4.17 4.65
Third Gear
80 mesh
• contact/high-pressure
REMEMBER
95-9186
2.5 0.44 0.46 0.54 0.60 0.65 0.73 0.87 0.95 1.09 1.22 1.33 1.50 1.09 1.17 1.36 1.52 1.66 1.85 1.28 1.41 1.63 1.82 1.99 2.23 1.71 1.88 2.18 2.42 2.67 2.99 2.15 2.37 2.72 3.05 3.32 3.73 3.24 3.54 4.08 4.57 5.00 5.58
Second Gear Speed (MPH) 4 0.27 0.29 0.34 0.37 0.41 0.46 0.54 0.60 0.68 0.77 0.83 0.94 0.68 0.73 0.85 0.95 1.04 1.16 0.80 0.88 1.02 1.14 1.24 1.39 1.07 1.17 1.36 1.51 1.67 1.87 1.34 1.48 1.70 1.90 2.07 2.33 2.02 2.21 2.55 2.86 3.13 3.49
CONTACT NOZZLES - GALLONS PER 1000 SQ FT (20 INCH NOZZLE SPACING)
Liquid Fertilizer
Systemic Nozzles
First Gear
Pre-Emergence
Insecticides
GASKET
Capacity 1 Nozzle (GPM) 0.16 0.17 0.20 0.22 0.24 0.27 0.32 0.35 0.40 0.45 0.49 0.55 0.40 0.43 0.50 0.56 0.61 0.68 0.47 0.52 0.60 0.67 0.73 0.82 0.63 0.69 0.80 0.89 0.98 1.10 0.79 0.87 1.00 1.12 1.22 1.37 1.19 1.30 1.50 1.68 1.84 2.05
GOOD
Soil Incorporated
Fungicides
4
1/2 Thread .2 GPM, Yellow
Pressure (PSI) 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75
Herbicides
Post-Emergence
CAP
Nozzle Description & Color Code
95-9221
M
Contact nozzles provide a varying spray distribution depending on pressure. It’s variability allows for better coverage at higher pressures and less drift at lower pressures.
ORDER THE CORRECT CAP AND GASKET FOR YOUR NOZZLE
on your turret to complete a variety of applications.
Selection Guide
SYSTEMIC NOZZLES - GALLONS PER 1000 SQ FT (20 INCH NOZZLE SPACING)
•
EXCELLENT
4
O
30 mesh
3
Soil Incorporated
Post-Emergence
CHOOSE SYSTEMIC OR CONTACT NOZZLES
• herbicides • fungicides • insecticides • liquid fertilizer • drift
B
50 mesh
2
N
Herbicides
to complete
FIND THE NOZZLE THAT FITS YOUR APPLICATION
E
Systemic nozzles provide excellent spray distribution through a wide angle, flat spray pattern. It’s larger droplets results in less drift.
SIMPLE STEPS
1
P
80 mesh
4
O
Nozzle
SYSTEMIC NOZZLES
1
EXCELLENT
YOUR SPRAYER
SELECT THE FILTER THAT FITS THE NOZZLE • 80 mesh • 50 mesh • 30 mesh
•
Pre-Emergence
•
O
M
2
VERY GOOD
Toro Part Number
GOOD
Fungicides
•
Insecticides
•
Liquid Fertilizer
•
Drift
•
CONTACT NOZZLES A
N
Y
B
O
O
VERY GOOD
95-9222
1/4 Thread .4 GPM, Red
95-9223
1/4 Thread .5 GPM, Brown
95-9224
1/4 Thread .6 GPM, Gray
95-9225
1/4 Thread .8 GPM, White
95-9188
1/4 Thread 1.0 GPM, Light Blue
95-9226
1/4 Thread 1.5 GPM, Light Green
•
•
contact/high-pressure
systemic/low-pressure
• systemic/low-pressure
•
•
contact/high-pressure
systemic/low-pressure
•
•
systemic/low-pressure
contact/high-pressure
Toro Part Number
94-8714
94-8715
5 9.5 10.1 11.9 13.1 14.3 16.0 19.0 20.8 23.8 26.7 29.1 32.7 23.8 25.5 29.7 33.3 36.2 40.4 27.9 30.9 35.6 39.8 43.4 48.7 37.4 41.0 47.5 52.9 58.2 65.3 46.9 51.7 59.4 66.5 72.5 81.4 70.7 77.2 89.1 99.8 109.3 121.8
5.5 8.6 9.2 10.8 11.9 13.0 14.6 17.3 18.9 21.6 24.3 26.5 29.7 21.6 23.2 27.0 30.2 32.9 36.7 25.4 28.1 32.4 36.2 39.4 44.3 34.0 37.3 43.2 48.1 52.9 59.4 42.7 47.0 54.0 60.5 65.9 74.0 64.3 70.2 81.0 90.7 99.4 110.7
6 7.9 8.4 9.9 10.9 11.9 13.4 15.8 17.3 19.8 22.3 24.3 27.2 19.8 21.3 24.8 27.7 30.2 33.7 23.3 25.7 29.7 33.2 36.1 40.6 31.2 34.2 39.6 44.1 48.5 54.5 39.1 43.1 49.5 55.4 60.4 67.8 58.9 64.4 74.3 83.2 91.1 101.5
Extended Range, 110 degrees, .5 GPM, Brown
94-8717
Description
80 mesh
50 mesh
30 mesh
Part Number
100-6992
100-8642
100-6991
Extended Range, 110 degrees, .6 GPM, Gray Extended Range, 110 degrees, .8 GPM, White Extended Range, 110 degrees, 1.0 GPM, Stainless Extended Range, 110 degrees, 1.5 GPM, Stainless
Pressure (PSI) 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60 20 30 40 50 60
Capacity 1 Nozzle (GPM) 0.28 0.35 0.40 0.45 0.49 0.35 0.43 0.50 0.56 0.61 0.42 0.52 0.60 0.67 0.73 0.57 0.69 0.80 0.89 0.98 0.71 0.87 1.00 1.12 1.22 1.06 1.30 1.50 1.68 1.84
First Gear 2.5 33.3 41.6 47.5 53.5 58.2 41.6 51.1 59.4 66.5 72.5 49.9 61.8 71.3 79.6 86.7 67.7 82.0 95.0 105.7 116.4 84.3 103.4 118.8 133.1 144.9 125.9 154.4 178.2 199.6 218.6
3 27.7 34.7 39.6 44.6 48.5 34.7 42.6 49.5 55.4 60.4 41.6 51.5 59.4 66.3 72.3 56.4 68.3 79.2 88.1 97.0 70.3 86.1 99.0 110.9 120.8 104.9 128.7 148.5 166.3 182.2
3.5 23.8 29.7 33.9 38.2 41.6 29.7 36.5 42.4 47.5 51.8 35.6 44.1 50.9 56.9 61.9 48.4 58.6 67.9 75.5 83.2 60.2 73.8 84.9 95.0 103.5 89.9 110.3 127.3 142.6 156.1
Second Gear Speed (MPH) 4 4.5 20.8 18.5 26.0 23.1 29.7 26.4 33.4 29.7 36.4 32.3 26.0 23.1 31.9 28.4 37.1 33.0 41.6 37.0 45.3 40.3 31.2 27.7 38.6 34.3 44.6 39.6 49.7 44.2 54.2 48.2 42.3 37.6 51.2 45.5 59.4 52.8 66.1 58.7 72.8 64.7 52.7 46.9 64.6 57.4 74.3 66.0 83.2 73.9 90.6 80.5 78.7 70.0 96.5 85.8 111.4 99.0 124.7 110.9 136.6 121.4
Third Gear 5 16.6 20.8 23.8 26.7 29.1 20.8 25.5 29.7 33.3 36.2 24.9 30.9 35.6 39.8 43.4 33.9 41.0 47.5 52.9 58.2 42.2 51.7 59.4 66.5 72.5 63.0 77.2 89.1 99.8 109.3
5.5 15.1 18.9 21.6 24.3 26.5 18.9 23.2 27.0 30.2 32.9 22.7 28.1 32.4 36.2 39.4 30.8 37.3 43.2 48.1 52.9 38.3 47.0 54.0 60.5 65.9 57.2 70.2 81.0 90.7 99.4
6 13.9 17.3 19.8 22.3 24.3 17.3 21.3 24.8 27.7 30.2 20.8 25.7 29.7 33.2 36.1 28.2 34.2 39.6 44.1 48.5 35.1 43.1 49.5 55.4 60.4 52.5 64.4 74.3 83.2 91.1
30 mesh
3
NOZZLE FILTERS
94-8719
40998
3.5 13.6 14.4 17.0 18.7 20.4 22.9 27.2 29.7 33.9 38.2 41.6 46.7 33.9 36.5 42.4 47.5 51.8 57.7 39.9 44.1 50.9 56.9 61.9 69.6 53.5 58.6 67.9 75.5 83.2 93.3 67.0 73.8 84.9 95.0 103.5 116.3 101.0 110.3 127.3 142.6 156.1 174.0
50 mesh
94-8716
94-8718
94-8720
Extended Range, 110 degrees, .4 GPM, Red
contact/high-pressure
TO FILL ALL THREE NOZZLES
Contact Nozzles
Nozzle Description & Color Code
•
Drift
40998
3 15.8 16.8 19.8 21.8 23.8 26.7 31.7 34.7 39.6 44.6 48.5 54.5 39.6 42.6 49.5 55.4 60.4 67.3 46.5 51.5 59.4 66.3 72.3 81.2 62.4 68.3 79.2 88.1 97.0 108.9 78.2 86.1 99.0 110.9 120.8 135.6 117.8 128.7 148.5 166.3 182.2 203.0
Third Gear
80 mesh
• contact/high-pressure
REMEMBER
95-9186
2.5 19.0 20.2 23.8 26.1 28.5 32.1 38.0 41.6 47.5 53.5 58.2 65.3 47.5 51.1 59.4 66.5 72.5 80.8 55.8 61.8 71.3 79.6 86.7 97.4 74.8 82.0 95.0 105.7 116.4 130.7 93.9 103.4 118.8 133.1 144.9 162.8 141.4 154.4 178.2 199.6 218.6 243.5
Second Gear Speed (MPH) 4 4.5 11.9 10.6 12.6 11.2 14.9 13.2 16.3 14.5 17.8 15.8 20.0 17.8 23.8 21.1 26.0 23.1 29.7 26.4 33.4 29.7 36.4 32.3 40.8 36.3 29.7 26.4 31.9 28.4 37.1 33.0 41.6 37.0 45.3 40.3 50.5 44.9 34.9 31.0 38.6 34.3 44.6 39.6 49.7 44.2 54.2 48.2 60.9 54.1 46.8 41.6 51.2 45.5 59.4 52.8 66.1 58.7 72.8 64.7 81.7 72.6 58.7 52.1 64.6 57.4 74.3 66.0 83.2 73.9 90.6 80.5 101.7 90.4 88.4 78.5 96.5 85.8 111.4 99.0 124.7 110.9 136.6 121.4 152.2 135.3
CONTACT NOZZLES - GALLONS PER ACRE (20 INCH NOZZLE SPACING)
Liquid Fertilizer
Systemic Nozzles
First Gear
Pre-Emergence
Insecticides
GASKET
Capacity 1 Nozzle (GPM) 0.16 0.17 0.20 0.22 0.24 0.27 0.32 0.35 0.40 0.45 0.49 0.55 0.40 0.43 0.50 0.56 0.61 0.68 0.47 0.52 0.60 0.67 0.73 0.82 0.63 0.69 0.80 0.89 0.98 1.10 0.79 0.87 1.00 1.12 1.22 1.37 1.19 1.30 1.50 1.68 1.84 2.05
GOOD
Soil Incorporated
Fungicides
4
1/2 Thread .2 GPM, Yellow
Pressure (PSI) 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75 25 30 40 50 60 75
Herbicides
Post-Emergence
CAP
Nozzle Description & Color Code
95-9221
M
Contact nozzles provide a varying spray distribution depending on pressure. It’s variability allows for better coverage at higher pressures and less drift at lower pressures.
ORDER THE CORRECT CAP AND GASKET FOR YOUR NOZZLE
on your turret to complete a variety of applications.
Selection Guide
SYSTEMIC NOZZLES - GALLONS GALLONS PER PER 1000 ACRE SQ (20FT INCH (20 NOZZLE INCH NOZZLE SPACING) SPACING)
•
EXCELLENT
4
O
30 mesh
3
Soil Incorporated
Post-Emergence
CHOOSE SYSTEMIC OR CONTACT NOZZLES
• herbicides • fungicides • insecticides • liquid fertilizer • drift
B
50 mesh
2
N
Herbicides
to complete
FIND THE NOZZLE THAT FITS YOUR APPLICATION
E
Systemic nozzles provide excellent spray distribution through a wide angle, flat spray pattern. It’s larger droplets results in less drift.
SIMPLE STEPS
1
P
80 mesh
4
O
NOTE: Lower pressures produce larger droplets and will help reduce mist under the covered boom.
©2006 The Toro Company. All rights reserved. Printed in the U.S.A. Form No. 06-180-T