Supplytec.com.co - Catálogo Industrial 2002 by Julian Castiblanco

39496-000 June 2002

ÂŽ

The worldâ&#x20AC;&#x2122;s most trusted name in belts, hose and hydraulics.

Industrial Hose Products/List Prices

Including Chemical Resistance Table And Hose Finder

WARNING The Gates Rubber Company recommends Industrial hoses for normal service as described in this catalog. Other applications should be referred to your respective marketing representative. In any application, there may be inherent risk of bodily injury or property damage and the user is responsible for implementation of adequate safety precautions. It is the responsibility of the person supplying the hose to advise the user of proper instructions for the adequate safe use and/or precautions and to warn the user of consequences of failure to heed such instruction. Should a hose assembly fail during use because of excessive pressure, injurious and/or damaging chemicals, elevated temperature materials, explosives or flammable materials, then serious bodily injury or destruction of property could result from impelled couplings, whipping hose, high pressure or high velocity discharge, chemical contact, high temperature materials, explosion or fire. In known high risk areas, it is recommended that hose inspections be performed at frequent intervals related to the risk factor. Hose with obvious damage should be scrapped and replaced. These inspections should include tube and cover conditions, leaking or slipped couplings and proof test. Detailed information concerning storage, care and maintenance may be found in the Hose Handbook published by The Rubber Manufacturers' Association, 1901 Pennsylvania Avenue, N.W., Washington, D.C. 20006 and in SAE Recommended Practices J1273. IMPORTANT Gates recommends only those applications of products specified in Gates product literature. Gates disclaims any liability for use of its products in applications other than those for which they were designed.

Service Life All rubber products, including Industrial Hose assemblies, have a limited life on a given application. Assuming the correct hose has been selected for the application, this service life can be adversely affected by many variable conditions. The major ones are: — Exposure to severe external abuse such as kinking, bending, high end pull, crushing or abrasion. — Exposure to higher-than-rated working pressures or to high surge pressures. — Exposure to higher-than rated temperatures. — Misapplication or exposure to corrosive liquids or gases outside the range of suitable applications. 1.

Internal Abrasion—For applications of a highly abrasive nature where the hose makes one or more bends, hose should be rotated 90º periodically to lengthen service life.

The hose manufacturer established, through design and testing, the recommended rated working pressure for the hose. It is the responsibility of the user to accurately determine the system pressure. Steady state pressure can be measured readily by gauges. Surges are difficult to measure and may require the use of electronic pressure pickup devices. Also, surge values depend on so many variables that a series of tests are usually required to obtain a valid set of readings. However, if there are extreme surges in the normal operation, or if there is the likelihood of abnormal operation of the system, the magnitude must be determined.

External abuse—hoses should be placed where they will not be run over by equipment or subjected to high end pull. Hoses should not be bent below recommended minimum bend radius. This could result in kinking the hose or reducing its pressure resistance. Large diameter hoses also may require additional support to reduce external abuse.

Considering the recommended rated working pressure of the HOSE and the various pressures of the SYSTEM, the hose is matched to the system using proper application engineering principles.

Hose & System Pressures—In establishing and determining pressures related to hose and the systems to which they are applied, it is necessary to consider separately the characteristics of the hose and the system.

LIMITED WARRANTY FOR THE LIFE OF THE MERCHANDISE

— The system (or device or application) can have several pressures depending on pressure sources and surges imposed by the operator or mechanical components. — A given hose has a fixed characteristic with respect to the pressure it can withstand (and how it is applied) and still give satisfactory life. 3.

High Temperatures—The allowable temperature ranges for industrial hoses are shown on Page 7. These are for product temperatures and should not be exceeded. High temperatures can degrade rubber stocks very quickly resulting in short service life.

Where external temperatures are higher than normal ambient, contact your Gates field representative for recommendations. 4.

Misapplication—All industrial hoses are designed for a certain specific application or related application. They should not be used for any other applications.

Hose Information—Refer to the following pages for details of hose construction and physical characteristics. These are shown in the data pages and include such items as rated working pressure, vacuum rating, minimum bend radius and static conductivity ratings.

WARRANTY Merchandise is warranted to be free from defects in material or workmanship for the life of the merchandise. The Gates Rubber Company will, at its option, replace or repair any merchandise proved defective in material or workmanship, or both, during the warranty period. This is the exclusive remedy. For warranty service please contact the Service Department, The Gates Rubber Company, 140 W. Mississippi Ave., Denver, CO 80223. THERE IS NO OTHER EXPRESS WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE EXPRESS WARRANTY PERIOD. LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES UNDER ANY AND ALL WARRANTIES ARE EXCLUDED TO THE EXTENT EXCLUSION IS PERMITTED BY LAW. Some states do not allow the exclusion or limitation of incidental or consequential damages, and some states do not allow limitations on how long an implied warranty lasts, so the above limitation and exclusion may not apply to you. The warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Printed in U.S. of America

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Table of Contents Description

Page

Warranty............................................................................................................................................................... Inside Front Cover Warning ................................................................................................................................................................ Inside Front Cover Service Life .......................................................................................................................................................... Inside Front Cover Index by Specification...................................................................................................................................................................... 2 Index of Industrial Hoses by Name and Number ............................................................................................................................. 3 Index of Industrial Hoses by Application...................................................................................................................................... 4-5 Characteristics of Hose Stock Types ................................................................................................................................................ 6 Hose Temperature Ranges................................................................................................................................................................ 7 Selection of Hoses and Coupling ..................................................................................................................................................... 8 Ends for Gates Hoses........................................................................................................................................................................ 9 Industrial Hose Categories: Acid-Chemical ............................................................................................................................................................ 10-16 Air Drill/Air Duct........................................................................................................................................................ 17-19 Food and Beverage...................................................................................................................................................... 20-32 Material Handling ....................................................................................................................................................... 33-39 Multi-Purpose.............................................................................................................................................................. 40-56 Oilfield Hose (Safety Clamps & Chain)...................................................................................................................... 57-64 Petroleum Transfer...................................................................................................................................................... 65-80 Pressure Washer………………………………………………………. ..................................................................... 81-82 Special Applications.................................................................................................................................................... 83-90 Steam........................................................................................................................................................................... 91-94 Water ......................................................................................................................................................................... 95-106 Coupling Information ............................................................................................................................................................ 107-117 RMA Information and Useful Technical Data ...................................................................................................................... 118-120 Industrial Hose Finder ........................................................................................................................................................... 121-138 Chemical Resistance Table.................................................................................................................................................... 139-171

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

TERMS, CONDITIONS AND TRANSPORTATION POLICY TERMS POLICY As shown on applicable discount schedule. Conditions • Prices do not include charges for special packaging, which will be extra, unless otherwise specified. • Prices are subject to change without notice. • Buyer shall reimburse Seller for all taxes, excise or other charges. Seller may be required to pay to any government (Federal, State or local) upon the sales, use, production or transportation of the merchandise sold hereunder. • Seller shall be excused and not liable for delays caused by Buyer’s request, labor troubles, shortages in materials, damage to plant, government regulations or other cause, similar or otherwise beyond Seller’s control.

TRANSPORTATION POLICY All prices are F.O.B point of shipment. The “F.O.B. point of shipment” term means that the title to the goods passes to the consignee (customer) at time of shipment and any claims against the carrier for loss or damage become the responsibility of the consignee. • Freight terms: As shown on applicable discount schedule. F.O.B. point of shipment, and shipped to any one location served by common carrier within the Continental United States, Hawaii or Alaska. On shipments to Hawaii or Alaska, shipment by sea service is considered common carrier. • Nonstock or special manufactured items will stand on their own for freight allowance, F.O.B. point of manufacture. • Partial shipments made at Gates discretion will be shipped prepaid provided the original order qualified for prepaid shipment. For additional terms and conditions, refer to Gates Form 411-0122. Terms and conditions are further subject to Gates Standard Quotation Form No. 1666.

Index by Specification SPEC

PAGE

3129F,H,L................................................35 3131 ........................................................27 3132C............................................28,29,30 3132D......................................................25 3132H......................................................28 3133 ........................................................26 3135SP....................................................95 3137M .....................................................96 3137T ......................................................97 3150B ......................................................78 3200B,R ..................................................47 3202T ......................................................42 3204E ......................................................49 3204E/S...................................................48 3204EB,SB..............................................50 3204BL,GR,YL ........................................51 3205B,R ..................................................45 3206 ........................................................46 3207NN,T ................................................89 3213B ....................................................105 3217HY .................................................106 3219AB....................................................41 3219AR ...................................................40 3220A ......................................................72 3220E ......................................................73 3220LP ....................................................72 3221WM ..................................................74

SPEC

PAGE

3222B,G,R,Y,BK,GY............................... 44 3224 ........................................................ 75 3237A...................................................... 90 3239S...................................................... 32 3284D,E,G,H,R,Y.................................... 43 3320 ........................................................ 72 3333 ........................................................ 85 3602E...................................................... 94 3605, SR ................................................. 93 3618,G .................................................... 17 3618,Y..................................................... 56 3619,G .................................................... 55 3619M ..................................................... 53 3619MC .................................................. 54 3624 ........................................................ 76 3670H ..................................................... 57 4110SS ................................................... 79 4129A...................................................... 33 4175EC ................................................... 98 4176HD................................................... 99 4219G ..................................................... 86 4465 ................................................... 83,84 4525A...................................................... 77 4651RL ................................................... 57 4657, KB, KG,KK, KY, PB,PG,PY........... 81 4657F,XB,XG,XY .................................... 82 4663A...................................................... 18

SPEC

PAGE

4663J ...................................................... 19 4663K...................................................... 87 4684CF ................................................... 88 4686AR ................................................. 101 4686AT ................................................. 102 4687R ..................................................... 67 4688CC,DC............................................. 65 4688CN................................................... 69 4688RB ................................................... 68 4688SS ................................................... 80 4688V...................................................... 71 4691HA ................................................... 34 4691L ...................................................... 36 4691V...................................................... 39 4693B...................................................... 20 4693R ..................................................... 21 4695,G .................................................... 10 4695M ..................................................... 11 4695RG................................................... 12 4696A...................................................... 16 4697G ..................................................... 15 4698B...................................................... 13 4698MB................................................... 14 4773E............................................ 61,62,63 4774 .............................................. 58,59,60 7744 ............................... 22,23,24,31,37,38 7744 .............................. 66,70,100,103,104 7746 ........................................................ 52

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Index of Industrial Hose by Name and Number NAME

PAGE

6B (Dura Master®) ........................46

NAME

PAGE

Appaloosa® .................................. 12 ®

NAME

PAGE

Master-Flex 202SW..................... 24

Barracuda ................................. 102

Master Flex 300 EPDM ............... 37

19B (Plant Master )......................40

Black Gold Rotary Vibrator

Master-Flex 400........................... 38

24B...............................................75

(Grade D) ..................................... 58

Master Flex 500......................... 100

33HB (Divers' Air).........................85

Black Gold Rotary Drilling

Master-Flex Fuel Delivery............ 66

63SB ............................................18

(Grade D) ................................ 59,60

Master-Flex Vapor Recovery....... 70

75W..............................................98

Black Gold Rotary Vibrator

Maverick® .................................... 67

76W..............................................99

(Grade E) ..................................... 61

Mustang® 45HW .......................... 10

77B...............................................89

Black Gold Rotary Drilling

Mustang Crush Resistant ............ 11

113S...........................................105

(Grade E) ................................ 62,63

Ohmega® ..................................... 90

119B (Plant Master) .....................41

Blacksnake® ................................. 76

Powerbraid® Plus .......................... 57

124HW .........................................77

Brahma®....................................... 68

PowerClean™ ........................ 81,82

18MB............................................17 ®

163SB ..........................................19

Brew Master ............................... 29

Premo Flex®................................. 45

205MB (Steam King®) ..................93

Cellar Master® .............................. 30

Python® Plus ................................ 44

232MB (Steam Queen®)...............94

Colt® ............................................. 16

Renegade™ ................................ 15

319MB (Gold Master ) .................55 429W (Sandblast) ........................33

Cyclone .................................... 106 ®

Dolphin ....................................... 97 ®

Safety Clamps & Chain ............... 64 Sani-Pure™ ................................. 27

500 MP/Air Drill ............................56

Duro Flex .................................... 47

Seahorse® ................................... 79

609W............................................35

Food and Beverage Master®........ 28

Seahorse HW .............................. 80

610W............................................25

Shark™...................................... 101

688SB ..........................................36

Gold Master (319MB)................. 55

Stallion® ....................................... 13

690SB ..........................................20

Heat Master®

Stallion Crush Resistant .............. 14

Food Master Lite™..................... 26

692SB ..........................................21

(Aramid Reinforced)................ 32

Steelhead® ................................... 95

770SB ..........................................39

Hot Air Blower .............................. 34

Steer® .......................................... 69

1000 MP/Mine Spray....................53

LOL Plus ...................................... 43

Super-Vac® .................................. 71

3619MC........................................54

Longhorn® .................................... 65

Thermo AG® 570 ......................... 83

4219G ..........................................86

LP350........................................... 72

Thermo AG 800 ........................... 84

4663K...........................................87

LPG Vapor ................................... 73

Terminator® ................................. 42

4684CF ........................................88

Marlin® ......................................... 96

Trident® 400................................. 78

Adapta Flex™ (Black Cover)........50

Master Flex® 100GR .................. 103

Tufflex® Food ............................... 31

Adapta Flex (Red Cover) .............48

Master Flex 101CL..................... 104

Tufflex GP.................................... 52

Adapta Flex (Blue,Green,Yellow) .51

Master Flex 200CL....................... 22

Wagon Master® ........................... 74

Adapta Flex (UPS Shippable) ......49

Master Flex 201CR ...................... 23

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

速

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Index of Industrial Hose by Application Subject

Page

Subject

Page

Abrasion ................................................................. 6,141 Acid-Chemical ........................................................10-16 Acid-Suction ...........................................................10-16 Agricultural Spray ................................................... 83,84 Agricultural Water.................................................95-104 Air ...........................................................................40-56 Air Blower .....................................................18,19,38,39 Air Drill .................................................................... 17,56 Air Duct.........................................................18,19,38,39 Air Tools .......................................................40,41,45-55 Ammonia Applicator ...............................................48-52 Aromatic Gasolines ........................... 65-70,74-77,79,80 Asphalt....................................................................... 145 Automotive Coolant ................................................ 98,99

Edible Products Transfer ........................................20-31 Electrical Resistance ................................... 40-42,44,90 Ends...............................................................................9 Engine Coolant ..................................................88,98,99 Enlarged End.................................................................9 EPDM .....................................................................6,141 Epichlorohydrin................................................6,141,153 Exhaust........................................................................88

B Beverage ................................................................20-31 Breathing ......................................................40,41,45,85 Brewery ..................................................................28-30 Bulk Materials .............................................. 20-30,33-39 Buna-N, Nitrile, NBR .............................................. 6,141 Buna-S (SBR)......................................................... 6,141 Butane .................................................................... 72,73 Butyl........................................................................ 6,141

C Cement ................................................................... 35,36 Chemical Cleanup .............................................10-16,89 Cleanup ...............................................42,81,82,105,106 Compressed Air............................................40-53,55,56 Coolant ..............................................................88,98,99 Couplings............................................................107-117 CPE, Chlorinated Polyethylene .............................. 6,141 Creamery Washdown................................................ 105 Cross-Linked Polyethylene .................................6,10-12 Curb Pump (UL-330) ..............................................74-77

F FDA (U.S. Food & Drug Administration).................20-32 Fertilizer Transfer ......................... 37,40,41,45-52,83,84 FKM ........................................................................6,141 Food Handling ........................................................20-32 Fuel Feed, Filler...........................................................87 Fuel Oil Transfer............................................... 65-69,74 Fuel Transfer ............................................... 65-69,74-80

G Gasohol ..................................................................75-77 Gasoline Pump (UL-330)........................................75-77 Gasoline Transfer ........................................ 65-69,74-80 Gatron速 ................................... 6,10-12,140,141,143-171 General Purpose (See Multi-Purpose) ...................40-50 Grain Handling............................................. 20-25,36,38 Grass Vacuuming ...................................................38-39 Gum Rubber ...........................................................6,141

H Heavy-Duty Water ...........................................95,96,101 Herbicide Transfer ....................................83,84,103,104 High Pressure Air .........................................17,53,55,56 High Pressure Washer ...........................................81,82 High Pressure Water ........................53,55,56,81,82,106 High Temperature.......................................................6,7 Hot Air Blower..............................................................34 Hot Food Oil ................................................................32 Hypalon速 .................................................................6,141

Debris Collecting ....................................................36-39 Distillate Transfer ...................................................65-70 Divers' Air .................................................................... 85 Dust Collection .............................................18,19,37-39

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

速

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Subject

Page

Subject

Page

I Industrial Air .......................................... 17-19,40-56 Industrial Couplings.................................. 8,107-117 Industrial Steam ......................................... 55,91-94 Industrial Water ................................... 40-56,95-106 Insecticide Transfer............................83,84,103,104 Insulation Handling...........................................38,39

Pot Room ................................................. 40-42,44,45,90 Propane (UL-21)............................................................72 PVC (Polyvinyl Chloride) ............................................6,41

Jet Fuel Transfer ..........................................158,170

Refueling ................................................................75-77 Resistance, Electrical..............................40-42,44,45,90 RMA (Rubber Manufacturers Association)................. 37,38,40-51,87,88,94,118-120

J Lay Flat Hose ......................................................100 Leaf Collector ...................................................38,39 Lightweight Water ...................... 97,98,100,102-104 Low Temperature .................................................6,7 LP Gas (UL-21) .....................................................72 LPG Vapor ............................................................73 Lube Oil Transfer ............................. 40-43,65,67,69

M Marine Wet Exhaust....................................88,98,99 Material Handling ............................................ 33-39 Mining.....................................................42,53,54,56 MSHA (Mine Safety & Health Admin.) ...42,53,54,56 Multi-Purpose .................................................. 40-56

N Natural Gas ...........................................................72 Natural Rubber.................................................6,141 NBR, Nitrile, Buna-N ........................................6,141 Neoprene .........................................................6,141 Nitrile, NBR, Buna-N ........................................6,141 Non-Conductive ............................... 40-42,44,45,90 Nylon ...........................................................6,89,141

SAE 20R, 30R ........................................................86-88 Sand Blast ................................................................... 33 SBR, Buna-S .......................................................... 6,141 Sewage ....................................................................... 37 Sludge .................................................................... 36,71 Solvents........................................................10-16,37,89 Steam ................................................................55,91-94

T Tank Truck (Chemical)...........................................10-16 Tank Truck (Food)..................................................20-30 Tank Truck (Petroleum) ......................... 65-72,74,78-80 Three A (3A Standards) ...............................21,22,26-30

U Underwriters' Laboratories (UL) ...................72,73,75-77 Urethane................................................................. 6,141 USDA........................................................... 21-24,26-31

V Vacuum (Dry) ......................................................... 38,39 Ventilating................................................18,19,38,39,86

O Oxygen ...................................................40,41,45,85 Ozone...............................................................6,141

P Paint Spray............................................................89 Paper Mill Washdown .........................................105 Pesticides...........................................83,84,103,104 Petroleum ........................................................ 65-80 Pneumatic Applications.............................. 17,40-56 Potable Water ....................................... 20-24,26-31

Washdown.................................40,41,53,81,82,105,106 Water ....................................................................95-106 Water Discharge...................................................95-100 Water Suction......................................37,81,82,101-106 Water Suction & Discharge .................37,81,82,101-106 Weather.................................................................. 6,141 Wet Exhaust ...................................................... 88,98,99 Wine .......................................................................28-30

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

CHARACTERISTICS AND RESISTANCE INFORMATION FOR HOSE TUBE AND COVER COMPOUNDS These ratings are for normal or usual range of the specified compounds. Many are also modified to meet the needs of specific applications. See notes below.

GATES TYPE

Ultra High Natural Ethylene ChloroCross Isobutylene Acrylonitrile Molecular Chlorinated Polyvinyl Rubber or Poly sulfonated Propylene Linked and IsoElastomer and Weight Polyethylene Chloride Styrene Chloroprene Diene Polyethylene Polyethylene prene Butadiene Polyethylene Butadiene (plasticized) Buna-N Gum Common Name or Nitrile Rubber, PVC Butyl CPE Gatron™ UHMWPE Hypalon® EPDM Trade Name Neoprene Petrothane™ Buna-S ASTM CR NBR NR or SBR — IIR CM XLPE UHPE CSM EPDM Good to Fair Fair Good Good Good Very Good Physical Strength Good Good Excellent Excellent to Good to Good Good Fair Good Fair Good RESISTANCE TO: Excellent Good Good Excellent Good to Excellent to Good to Excellent to Good to Excellent Abrasion Poor Good Excellent Excellent Good Excellent Good Excellent Excellent Poor Weather/Ozone to Fair to Excellent Good Fair Good Good Good Excellent Good Good Excellent Gas Permeation to Excellent to Good Good to Excellent Good Good Poor Poor Good Excellent Excellent Petroleum Oils Excellent Excellent Poor to Excellent to Excellent Fair Excellent Poor Fair Poor Good Excellent Excellent Fair Poor Gasolines to Good Good Good High Temperatures Good Fair Poor Excellent Excellent Good Fair Excellent to Excellent to Excellent Fair Fair Fair Fair Good Poor Good Good Fair Fair Low Temperatures to Good to Good to Good to Good

White food grade Neoprene, complies with FDA (tube) Modification of Nitrile with increased ozone resistance (tube and cover) Modification to Nitrile tube Modification of Nitrile with excellent abrasion, tearing and gouging resistance (cover) White food grade Natural Rubber, complies with FDA (tube) Natural Rubber Proprietary for special applications. Contact Denver Hose Product Application Special for Steam Hose applications FEP PTFE

Teflon

Urethane

FEP/PTFE

Fluorocarbon Fluoroelastomer FKM Viton Fluorel FKM

Very Good

Excellent

Good

Excellent

Good to Excellent

Excellent

Good

Excellent

Teflon®

Polyurethane

Excellent Excellent

Fair to Good Fair to Good

Polyamide Resins

Nylon PA

Excellent

Good

Excellent

Fair

Excellent

Fair

Excellent

Good

Excellent

Good

Excellent

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

A2 C2 C3 C4 D2 D3 B1 B2 R P2 T1 T2

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Hose Temperature Ranges

Temperature ranges for the Industrial hoses are shown by application groups. The range in the Normal Service column indicates the usual temperature range for each specific hose listed under each application group. The lower limit column indicates the approximate temperature at which the hose will become too stiff to use. For information on applications or temperatures not listed in this table, contact Denver Production Application. Range for Normal Service °F*

Application Group Acid-Chemical Appaloosa® Colt® Mustang® 45HW Renegade™ Stallion® Air 18MB 63SB 163SB Food & Beverage 610W 690SB 692SB Brew Master® Cellar Master® Food and Beverage Master® Food Master® Lite Heat Master® ® Master Flex 200CL Master Flex 201CR Master Flex 202SW Sani-Pure™ Tufflex® Food Material Handling 429W 609W 688SB 770SB Hot Air Blower Master Flex 300EPDM Master Flex 400 Multi-Purpose 6B 19B/119B 319MB (Gold Master®) 500 MP/Air Drill 1000 MP/Mine Spray 3619MC Adapta Flex™ ® Duro Flex ® Premo Flex LOL Plus ® Python Plus ® Terminator ® Tufflex GP Oil Field ® Powerbraid Plus ® Black Gold Rotary Vibrator Black Gold Rotary Drilling Petroleum 24B 124HW ® Blacksnake ® Brahma ® Longhorn

†

Lower Limit °F

0-125 † 0-125 † 0-125 † 0-125 † 0-125

-40 -40 -40 -40 -40

0-212 0-212 0-212

-30 -40 -40

0-150 0-150 0-180 0-230 0-230 0-230 0-230 0-300 10-130 10-130 10-130 0-230 10-130

-40 -40 -40 -40 -40 -40 -40 0 -10 -10 -10 -40 -10

0-150 0-150 0-150 0-150 0-350 10-140 32-140

-40 -40 -40 -40 -40 -30 -30

0-200** 0-212** 0-212 0-180 0-212 0-212 0-200** 0-200** 0-212** 0-212 0-212 0-212 0-150

-40 -40*** -40 -22 -40 -40 -40 -40 -40 -40 -20 -40 -15

0-180 0-180 0-180

-40 -4 -4

0-120 0-120 0-120 0-180 0-180

-40 -40 -40 -40 -40

Application Group Petroleum (continued) LP350 LPG Vapor ® Maverick ® Master Flex Fuel Delivery Master Flex Vapor Recovery ® Seahorse Seahorse HW ® Steer ® Super-Vac ® Trident 400 ® Wagon Master Pressure Washer PowerClean™ Special Applications 33HB (Divers Air) 77B 4219G (Fuel Line & Tank Vent) 4663K (Fuel Tank Filler) 4684CF (Wet Exhaust) ® Ohmega ® Thermo-Ag 570 Thermo-Ag 800 Steam 205MB 232MB Water 75W 76W 113S ™ Barracuda ® Cyclone ® Dolphin ® Marlin ® Master Flex 100GR Master Flex 101CL Master Flex 500 Shark™ ® Steelhead

Range for Normal Service °F*

Lower Limit °F

0-180 0-150 0-180 0-130 0-140 0-180 0-180 0-180 0-150 0-158 0-180

-40*** -30 -40 -30 -30 -40 -40 -40 -40 -30 -20***

0-212

-40

0-120 † 0-125 0-257 0-212 0-212 0-150 0-130 0-130

-40 -40 -40 -40 -40 -20 -10 -10

0-450 1 0-450 32-257 32-257 0-212 0-180 0-212 0-180 0-180 10-130 10-130 25-120 0-180 0-150

-40 -40 -40 -40 -40 -40 -40 -40 -40 -10 -10 +25 -40 -40

‡

As temperature increases, allowable pressure rating decreases. For details, see the rated working pressure/temperature tables listed with the individual hose specifications. † Contact Denver Product Application for chemicals over 125ºF. 1 With saturated or superheated steam. 2 With saturated steam only. * Ambient or product temperature. ** If hose is subjected to this temperature continuously, reduce the catalog rated working pressure by 30%, or use interlocking type couplings. *** These hoses will be flexible down to -20ºF. At temperatures between -20ºF and -40ºF, the hose may require significant force to be bent, flexed or pulled from reels. SUCTION VALUES ARE AT AMBIENT TEMPERATURES UNLESS OTHERWISE STATED.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Selection of Hoses and Couplings There are many types of industrial hoses—all designed for a particular application or several related applications. When these hoses are mated with the proper couplings and used in the correct application, the hose assemblies will give long, trouble-free service. This catalog is designed to make certain that you obtain long service life by: • •

Remember the Word STAMPED To Help You Select the Best Hose Size: Inside diameter, outside diameter, length. Temperature: Minimum and maximum °F. Application: How and where used: Special needs, UL, Government, FDA, MSHA, etc.

Helping you initially select the proper hose and coupling from among the many types available for the applications.

Material Conveyed: Air, water, chemicals (concentration and

Giving you suggestions on how to take reasonable care of the hose assembly and maintain it for maximum service life.

Pressure: Maximum rated W.P. (psi) or Suction (In.Hg) Ends: Straight, Male, etc. Delivery: When, where, quantity.

Follow the instructions and procedures given below:

Selection of Hoses and Couplings Information in this catalog will enable you to select hose and couplings for many applications.

Application

Page

temperature), petroleum, etc.

Select one of the recommended couplings from the coupling information section on pages 107-117. In each individual Hose Specification Section, couplings are recommended by a Block Number. For example: 19 . Check coupling compatibility in Industrial Hose Coupling Assembly Guide #39505 with the material to be handled.

Acid-Chemical ......................................................................10-16

Provide for proper care and maintenance of the assembly.

Air Drill/Air Duct..................................................................17-19

Before finalizing your selection, check the “Special Applications” listed on pages 83-90 for additional information and references.

Food and Beverage................................................................20-32 Material Handling .................................................................33-39 Multi-Purpose........................................................................40-56 Oilfield Hose .........................................................................57-64 Petroleum Transfer ................................................................65-80

Certain critical applications require the use of just one specific hose or group of hoses. DO NOT SUBSTITUTE. Critical Application Steam

Select a hose that meets the application requirements from Steam Hose Section only.

LP Gas

LP350

Pressure Washer ....................................................................81-82 Special Applications..............................................................83-90 Steam.....................................................................................91-94 Water ...................................................................................95-106

Recommended Gates Hoses

Corrosive Chemicals (Acids—Bases)

Couplings ..........................................................................107-117 Edible Products

Select a hose that meets the application requirements from Acid-Chemical Hose Section only. Select a hose that meets application requirements from Beverage and Food Hoses. Hose must have FDA tube stock.

SPECIAL HOSES ARE AVAILABLE Gates can furnish special hoses for specific applications. For information, contact Denver – furnishing complete details of hose application.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Ends for Gates Hose Many applications require hose with special ends to provide protection and better coupling for the hose.

To be sure you receive the proper hose end, always specify the type of end, the length of end and its inside diameter (if enlarged and nonstandard).

Four Types of Hose Ends 1.

Plain end (When ordering—specify P.E.) Braided, spiral and thermoplastic hoses are available only with plain ends. Plain ends are generally furnished on wrapped and horizontal braid hoses, unless otherwise specified. The plain end is obtained by merely cutting hose to a specified length.

Straight End (When ordering—specify S.E.) All wire-reinforced, hand-built hoses are available with straight ends. The straight end, not corrugated, has all construction elements except the wire. Straight ends permit leakproof clamping of the hose because the wire does not overlap the coupling shank.

Enlarged End (When ordering—specify E.E.) Hand-built hoses, either wire-reinforced or wrapped, are also available with enlarged ends. The hose end is enlarged to accommodate the O.D. of a nipple and the depth of the shank. Thus, an enlarged end to 6 5/8" I.D. is made to fit a 6" nipple which has a 6 5/8" O.D.

Smooth End (Seldom Used) The smooth end is used on wire reinforced hose with corrugated cover. Construction elements, including wire, extend through to the end of the hose. The outside of the end is smooth with no corrugations.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Mustang® 45HW

Acid-Chemical Hose

(Specification 4695/4695G) Black Cover (4695) Part No. 305750 305751 305752 305753 305754 305755 305756 305757

Nom. I.D. (ln.) 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

Nom. O.D. (mm) 19.0 25.4 31.8 38.0 51.0 63.0 76.0 102.0

(ln.) 1.25 1.50 1.75 2.04 2.54 3.05 3.58 4.69

Max. W.P. (mm) 31.8 38.1 44.5 51.8 64.5 77.5 90.9 119.0

(psi) 200 200 200 200 200 150 150 125

Min. Bend Radius

Suction (MPa) 1.38 1.38 1.38 1.38 1.38 1.03 1.03 .86

(ln. Hg) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

(mm Hg) 762 762 762 762 762 762 762 762

(ln.) 4.0 5.0 6.0 8.0 9.0 12.0 18.0 24.0

Wt. Per Ft. (mm) 102 127 152 203 229 305 457 610

(Lbs.) .45 .56 .66 .87 1.10 1.40 1.79 2.72

(Kg) .20 .25 .30 .40 .50 .64 .81 1.23

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. X X X X X X X X

Item No. 4695-0002 4695-0003 4695-0004 4695-0005 4695-0001 4695-0006 4695-0007 4695-0008

Per Ft. $19.71 20.75 21.90 23.69 29.85 35.40 42.49 52.30

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. 400 ft. X X X

Item No. 4695-0628 4695-0211 4695-0216 4695-0229

Per Ft. $20.75 23.69 29.85 42.49

Green Cover (4695G) Part No. 306609 306610 306611 306612

Nom. I.D. (ln.) 1 1 1/2 2 3

Nom. O.D. (mm) 25.4 38.0 51.0 76.0

(ln.) 1.50 2.04 2.54 3.58

RECOMMENDED FOR:

Max. W.P. (mm) 38.1 51.8 64.5 90.9

(psi) 200 200 200 150

Min. Bend Radius

Suction (MPa) 1.38 1.38 1.38 1.03

(ln. Hg) 30.0 30.0 30.0 30.0

(mm Hg) 762 762 762 762

(ln.) 5.0 8.0 9.0 18.0

Wt. Per Ft. (mm) 127 203 229 457

(Lbs.) .56 .88 1.11 1.81

(Kg) .25 .40 .50 .82

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Mustang 45HW contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Crosslinked Polyethylene tube stock is "best in class" for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with “open end” 50 PSI steam or in a bath containing 10% (NaOH) @ 212ºF (100ºC). Not recommended for “closed steam” cleaning. Applications include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table on page 139 for proper hose selection. NOTE: For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070.

TEMPERATURE:

-40ºF to +250ºF (-40ºC to +121ºC) normal service. Mustang 45HW is designed to withstand fluid temperatures to 250ºF (+121ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

CONSTRUCTION:

Tube: Type K (Gatron™ Modified Cross-linked Polyethylene.) Tan. High chemical resistance. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Black or green corrugated with orange spiral stripe. Blue, red, and yellow covers available on special order.

COUPLINGS:

Gates has tested hose assemblies at the maximum rated service temperature to assure your safety. Use 7 , 8 or 49 for fluid temperatures to 125ºF (+52ºC). Use permanent fittings only 71 or for fluid temperatures above 125ºF (+52ºC) and up to 250ºF (+121ºC). Reference pages 107-117.

PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

100' length coiled and wrapped in polyethylene. Continuous transfer label. Example: “ Mustang® 45HW Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Couplings above 125ºF.” Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Blue, red, and yellow covers are made to order and require minimum production order quantities of 400 feet per size. For price, add 10% (x1.10) to above price.

REMNANT LENGTHS:

Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Mustang® Crush Resistant

Acid-Chemical Hose

(Specification 4695M) Part No. 307010 307011 307012 307013

Nom. I.D. (ln.) 3/4 1 1 1/2 2

Nom. O.D. (mm) 19.0 25.4 38.0 51.0

Max. W.P.

(ln.) 1.36 1.61 2.13 2.63

(mm) 34.5 40.9 54.1 66.8

(psi) 200 200 200 200

Min. Bend Radius

Suction (MPa)) 1.38 1.38 1.38 1.38

(ln. Hg) 20.0 20.0 20.0 20.0

(mm Hg) 508 508 508 508

(ln.) 4.0 5.0 8.0 9.0

Wt. Per Ft. (mm) 102 127 203 229

(Lbs.) .53 .64 .90 1.13

(Kg) .24 .29 .41 .51

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. 400 ft. 400 ft. 400 ft. 400 ft.

Item No. 4695-0607 4695-0608 4695-0609 4695-0610

Per Ft. $21.68 22.82 26.05 32.83

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Mustang Crush Resistant contains a monofilament helix for full suction and crush resistant capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is "best in class" for maintaining a tight seal with stainless steel fittings, and is designed for cleaning with “open end” 50 PSI steam or in a bath containing 10% (NaOH) @ 212ºF (100ºC). Not recommended for “closed steam” cleaning. Applications

RECOMMENDED FOR:

include over 950 basic chemicals that are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table on page 139 for proper hose selection. NOTE: For applications requiring greater than 90% sulfuric acid contact Denver Product Application (303) 744-5070. TEMPERATURE:

-40ºF to +250ºF (-40ºC to +121ºC) normal service. Mustang Crush Resistant is designed to withstand fluid temperatures to 250ºF (+121ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

CONSTRUCTION:

Tube: Type K (Gatron™ Modified Cross-linked Polyethylene.) Tan. High chemical resistance. Reinforcement: Synthetic, high tensile textile with monofilament helix and static wire providing crush and kink resistance. Cover: Type P (EPDM). Black corrugated with orange spiral stripe. Blue, red, and yellow covers available on special order. Gates has tested hose assemblies at the maximum rated service temperature to assure your safety.

COUPLINGS:

Use 7 , 8 or 49 for fluid temperatures to 125ºF (+52ºC). Use permanent fittings only 71 or for fluid temperatures above 125ºF (+52ºC) and up to 250ºF (+121ºC). Reference pages 107-117.

100' length coiled and wrapped in polyethylene.

PACKAGING:

Continuous transfer label. Example: “ Mustang® Crush Resistant Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Couplings above 125ºF.”

BRANDING:

SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Blue, red, and yellow covers are made to order and require minimum production order quantities of 400 feet per size. For price, add 10% (x1.10) to above price. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #11 May, 1999

Industrial Hose Products/List Prices

Appaloosa®

Acid-Chemical Hose

(Specification 4695RG) Part No. 305725 305726 305727

Nom. I.D. (ln.) 1 1/2 2 3

(mm) 38.0 51.0 76.0

Nom. O.D. (ln.) 1.97 2.47 3.51

RECOMMENDED FOR:

(mm) 50.0 62.7 89.2

Max. W.P. (psi) 200 200 150

(MPa)) 1.38 1.38 1.03

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0

Min. Bend Radius (ln.) 8.0 9.0 18.0

(mm) 203 229 457

Wt. Per Ft. (Lbs.) .76 .97 1.58

(Kg) .35 .44 .72

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 4695-0665 4695-0666 4695-0668

List Price Per Ft. $26.05 32.83 46.73

Use for tank truck, barge, ship, or storage tank transfer of a variety of chemical products where external abrasion resistance is critical. Appaloosa contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its Modified Cross-linked Polyethylene tube stock is "best in class" for maintaining a tight seal with stainless steel fittings. Capable of handling more than 950 basic chemicals. Reference Gates Chemical Resistance Table on page 139 for proper hose selection.

TEMPERATURE:

CONSTRUCTION:

COUPLINGS:

-40ºF to +225ºF (-40ºC to +107ºC) normal service. Appaloosa is designed to withstand fluid temperatures to 225ºF (+107ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC). Tube: Type K (Gatron™ Modified Cross-linked Polyethylene.) Tan. High chemical resistance. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type L (UHMWPE) over a base of Type P (EPDM). Black corrugated cover with green dots and a green spiral stripe. Gates has tested hose assemblies at the maximum rated service temperature to assure your safety. Use 7 , 8 or 49 for fluid temperatures to 125ºF (+52ºC). Use permanent fittings only 71 or for fluid temperatures above 125ºF (+52ºC) and up to 250ºF (+121ºC). Reference pages 107-117.

PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

100' length coiled and wrapped in polyethylene. Continuous transfer label. Example: “ Appaloosa® Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Couplings above 125ºF.” Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Stallion®

Acid-Chemical Hose

(Specification 4698B) Part No. 315001 315008 315002 315009 315003 315010 315004 315011 315005 315012 315006 315013 315007 315014

Nom. I.D. (ln.) 3/4 3/4 1 1 1 1/2 1 1/2 2 2 2 1/2 2 1/2 3 3 4 4

Nom. O.D. (mm) 19.0 19.0 25.4 25.4 38.0 38.0 51.0 51.0 63.0 63.0 76.0 76.0 102.0 102.0

Max. W.P.

(ln.) 1.29 1.29 1.56 1.56 2.05 2.05 2.55 2.55 3.07 3.07 3.59 3.59 4.66 4.66

(mm) 32.8 32.8 39.6 39.6 52.1 52.1 64.8 64.8 78.0 78.0 91.2 91.2 118.4 118.4

(psi) 200 200 200 200 200 200 200 200 150 150 150 150 125 125

Min. Bend Radius

Suction (MPa) 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.03 1.03 1.03 1.03 .86 .86

(ln. Hg) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

(mm Hg) 762 762 762 762 762 762 762 762 762 762 762 762 762 762

(ln.) 4.0 4.0 5.0 5.0 8.0 8.0 9.0 9.0 12.0 12.0 18.0 18.0 24.0 24.0

Wt. Per Ft. (mm) 102 102 127 127 203 203 229 229 305 305 457 457 610 610

(Lbs.) .52 .52 .63 .63 .93 .93 1.18 1.18 1.49 1.49 1.83 1.83 2.74 2.74

(Kg) .24 .24 .29 .29 .42 .42 .54 .54 .68 .68 .83 .83 1.24 1.24

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 20 ft. 100 ft. 20 ft. 100 ft. 20 ft. 100 ft. 20 ft. 100 ft. 20 ft. 100 ft. 20 ft. 100 ft. 20 ft.

Order Qty. X X X X X X X X X X X X X X

Item No. 4698-0011 4698-0021 4698-0012 4698-0022 4698-0013 4698-0023 4698-0014 4698-0024 4698-0015 4698-0025 4698-0016 4698-0026 4698-0017 4698-0027

Per Ft. $36.73 36.73 43.19 43.19 58.78 58.78 71.71 71.71 90.53 90.53 107.03 107.03 150.53 150.53

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Stallion has a wire helix for full suction capability. The Teflon* tube stock has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Stallion is designed for easy cleaning in a bath containing 10% (NaOH) @ 212ºF (100ºC). Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table on page 139 for proper hose selection.

RECOMMENDED FOR:

-40ºF to +300ºF (-40ºC to +149ºC) normal service. Stallion is designed to withstand fluid temperatures to 300ºF (+149ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

TEMPERATURE:

Tube: Type T (FEP) (Teflon* or Neoflon**). White backed with Gatron™ Modified XLPE. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Blue corrugated with red spiral stripe.

CONSTRUCTION:

Gates has tested hose assemblies at the maximum rated service temperature to assure your safety.

COUPLINGS:

Use permanent fittings only 107-117.

for fluid temperatures above 300ºF (149ºC). Reference pages

100' length coiled and wrapped in polyethylene.

PACKAGING:

U.S. Pat. No.

Continuous transfer label. Example: “ Stallion® 5,647,400 Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Fittings Only!”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Black, red, green and yellow covers are made to order and require minimum production order quantities of 400 feet per size. For price, add 10% (x1.10) to above price. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

* Registered trademark of DuPont. ** Registered trademark of Dalkin.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Stallion® Crush Resistant

Acid-Chemical Hose

(Specification 4698MB) Part No. 315201 315202 315203 315204

Nom. I.D. (ln.) 3/4 1 1 1/2 2

Nom. O.D. (mm) 19.0 25.4 38.0 51.0

(ln.) 1.33 1.58 2.08 2.58

Max. W.P. (mm) 33.8 40.1 52.8 65.5

(psi) 200 200 200 200

Min. Bend Radius

Suction (MPa) 1.38 1.38 1.38 1.38

(ln. Hg) 20.0 20.0 20.0 20.0

(mm Hg) 508 508 508 508

(ln.) 4.0 5.0 8.0 9.0

Wt. Per Ft. (mm) 102 127 203 229

(Lbs.) .53 .63 .86 1.09

(Kg) .24 .29 .39 .49

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. 400 ft. 400 ft. 400 ft. 400 ft.

Item No. 4698-0001 4698-0002 4698-0003 4698-0004

Per Ft. $40.40 47.51 64.67 78.87

RECOMMENDED FOR:

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Stallion Crush Resistant has a monofilament helix for suction and crush resistant capability. The Teflon* tube stock has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Stallion Crush Resistant is designed for easy cleaning in a bath containing 10% (NaOH) @ 212ºF (100ºC). Applications include most basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table on page 139 for proper hose selection.

TEMPERATURE:

-40ºF to +300ºF (-40ºC to +149ºC) normal service. Stallion Crush Resistant is designed to withstand fluid temperatures to 300ºF (+149ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

CONSTRUCTION:

COUPLINGS:

Tube: Type T (FEP) (Teflon* or Neoflon**). White backed with Gatron™ Modified XLPE. Reinforcement: Synthetic, high tensile textile with monofilament helix and static wire. Cover: Type P (EPDM). Blue corrugated with red spiral stripe. Gates has tested hose assemblies at the maximum rated service temperature to assure your safety. Use permanent fittings only 107-117.

PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

for fluid temperatures up to 300ºF (149ºC). Reference pages

100' length coiled and wrapped in polyethylene. U.S. Pat. No.

Continuous transfer label. Example: “ Stallion® 5,647,400 Crush Resistant Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For your safety: Use Permanent Fittings Only!” Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Black, red, green and yellow covers are made to order and require minimum production order quantities of 400 feet per size. For price, add 10% (x1.10) to above price.

REMNANT LENGTHS:

Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability. * Registered trademark of DuPont. ** Registered trademark of Dalkin.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Renegade™

Acid-Chemical Hose

(Specification 4697G) Part No. 306901 306902 306903 306904 306905 306906 306907 306908

Nom. I.D. (ln.) 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4

Nom. O.D. (mm) 19.0 25.4 31.8 38.0 51.0 63.0 76.0 102.0

Max. W.P.

(ln.) 1.22 1.47 1.72 2.00 2.50 3.01 3.53 4.53

(mm) 31.0 37.3 43.7 50.8 63.5 76.5 89.7 115.1

(psi) 200 200 200 200 200 150 150 125

Min. Bend Radius

Suction (MPa) 1.38 1.38 1.38 1.38 1.38 1.03 1.03 .86

(ln. Hg) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

(mm Hg) 762 762 762 762 762 762 762 762

(ln.) 4.0 5.0 6.0 8.0 9.0 12.0 18.0 24.0

Wt. Per Ft. (mm) 102 127 152 203 229 305 457 610

(Lbs.) .41 .51 .60 .78 .99 1.28 1.63 2.11

(Kg) .19 .23 .27 .35 .45 .58 .74 .96

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. X X X X X X X X

Item No. 4697-0014 4697-0015 4697-0016 4697-0017 4697-0018 4697-0019 4697-0020 4697-0021

Per Ft. $21.66 22.84 24.11 26.03 32.80 38.95 46.73 57.56

RECOMMENDED FOR:

Tank truck, barge, ship, or storage tank transfer of a variety of chemical products. Renegade contains a wire helix for full suction capability, as well as for routing hoses through tight bends. The Ultrahigh Molecular Weight Polyethylene tube stock has excellent chemical resistance and is backed by Gates Gatron™ for flex fatigue safety at the coupling. Renegade is designed for easy cleaning in a bath containing 10% (NaOH) @ 212ºF (100ºC). Applications include over 450 basic chemicals which are building blocks for numerous chemicals used in a variety of industries. Reference Gates Chemical Resistance Table on page 139 for proper hose selection.

TEMPERATURE:

-40ºF to +212ºF (-40ºC to +100ºC) normal service. Renegade is designed to withstand fluid temperatures to 212ºF (+100ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

CONSTRUCTION:

Tube: Type L (Ultrahigh Molecular Weight Polyethylene). Clear, backed with Gatron™ Modified XLPE. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Green corrugated with yellow spiral stripe. Gates has tested hose assemblies at the maximum rated service temperature to assure your safety.

COUPLINGS:

Use 7 , 8 or 49 for fluid temperatures to 125ºF (+52ºC). Use permanent fittings only 71 or for fluid temperatures above 125ºF (+52ºC) and up to 212ºF (+100ºC). Reference pages 107-117.

100' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ Renegade™ Acid-Chemical Suction/Discharge 200 PSI (1.38MPa) WP Made In U.S.A. For Your Safety: Use Permanent Couplings above 125ºF.”

SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Black, red, blue and yellow covers are made to order and require minimum production order quantities of 400 feet per size. For price, add 10% (x1.10) to above price. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Colt®

Acid-Chemical Hose

(Specification 4696A) Part

Nom. I.D.

No. 318000 318001 318002 318003 318004 318005 318006 308007 318008

(ln.) 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4 6

Nom. O.D. (mm) 19.0 25.4 31.8 38.0 51.0 63.0 76.0 102.0 152.0

(ln.) 1.27 1.52 1.79 2.04 2.54 3.05 3.60 4.60 6.78

Max. W.P. (mm) 32.3 38.6 45.5 51.8 64.5 77.5 91.4 116.8 172.2

(psi) 150 150 150 150 150 150 150 125 125

Min. Bend Radius

Suction (MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 .86 .86

(ln. Hg) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

(mm Hg) 762 762 762 762 762 762 762 762 762

(ln.) 3.0 3.5 4.0 5.0 6.0 9.0 11.0 16.0 24.0

Wt. Per Ft. (mm) 76 88 102 127 152 229 279 406 610

(Lbs.) .50 .61 .77 .89 1.11 1.48 1.94 2.52 4.95

(Kg) .23 .28 .35 .40 .50 .67 .88 1.14 2.25

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft.

Item No. 4696-0002 4696-0001 4696-0003 4696-0004 4696-0005 4696-0006 4696-0009 4696-0012 4696-0017

Per Ft. $12.83 13.32 14.67 15.33 17.12 20.74 24.85 31.40 59.30

RECOMMENDED FOR:

Tank truck, barge, ship, or storage tank transfer of a variety of mild chemical products. Colt contains a wire helix for full suction capability, as well as for routing hoses through tight bends. Its EPDM tube stock will withstand 250ºF (+121ºC) applications. Reference Gates Chemical Resistance Table on page 139 for proper hose selection.

TEMPERATURE:

-40ºF to +250ºF (-40ºC to +121ºC) normal service. Colt is designed to withstand fluid temperatures to 250ºF (+121ºC), however the rating is dependent on the specific chemical conveyed. Contact Denver Product Application (303) 744-5070 for any chemical above 125ºF (+52ºC).

CONSTRUCTION:

Tube: Type P (EPDM). Black. Mild chemical resistance. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Yellow corrugated with green spiral stripe.

COUPLINGS:

PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS:

100' length coiled and wrapped in polyethylene. Colt® Acid-Chemical Suction/Discharge 150 PSI Continuous transfer label. Example: “ (1.38MPa) WP Made In U.S.A. For Your Safety: Use Permanent Couplings above 125ºF.” Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

18MB Air Drill (Wire Braid)

Air Drill Hose

(Specification 3618/3618G) Part No. 301151 301152 301153 301154 301155 301156 301159 301157 301158

Nom. I.D. (ln.) 3/4 1 1 1/4 1 1/2 2 2 1/2 2 1/2 3 4

Nom. O.D. (mm) 19.0 25.4 31.8 38.0 51.0 63.0 63.0 76.0 102.0

Max. W.P.

(ln.) 1.28 1.55 1.80 2.21 2.77 3.46 3.46 3.97 5.06

(mm) 32.5 39.4 45.7 56.1 70.4 87.9 87.9 101.0 129.0

(psi) 500 500 500 500 500 500 500 500 500

Min. Bend Radius

Suction (MPa) 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45

(ln. Hg) 25.0 25.0 15.0 15.0 15.0 10.0 10.0 10.0 10.0

(mm Hg) 635 635 381 381 381 254 254 254 254

(ln.) 6.0 8.0 10.0 12.0 14.0 30.0 30.0 36.0 48.0

Wt. Per Ft. (mm) 152 203 254 305 356 762 762 914 1219

(Lbs.) .60 .80 .95 1.26 1.99 3.04 3.04 3.69 5.77

Standard

Stock (X) or Minimum

Gates

List Price

Pack 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 60 ft. 50 ft. 50 ft.

Order Qty. X X 5,000 ft. X X X X X X

Item No. 3618-0011 3618-0021 3618-0031 3618-0041 3618-0051 3618-0201 3618-0205 3618-0215 3618-0225

Per Ft. $11.97 13.90 17.27 22.59 31.99 38.94 38.94 47.17 62.93

(Kg) .27 .36 .43 .57 .90 1.38 1.38 1.67 2.62

Extra heavy duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire braided hose with an oil resistant tube and abrasion resistant cover.

RECOMMENDED FOR:

-30ºF to +212ºF (-34ºC to +100ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type A (Neoprene). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type D3 (Natural Rubber). Gray with yellow spiral stripe. All sizes are perforated.

COUPLINGS:

. Reference pages 108-117.

3/4" through 1 1/2": Packaged 49'-50' length coiled in a carton. 2" through 4": Packaged 48'-50' length coiled in a carton. 2 1/2" x 60': Packaged 60' length coiled in a carton.

PACKAGING:

BRANDING:

Continuous spiral transfer or continuous molded strip label. Example: “ 500 PSI (3.45MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

18MB Premium Air Drill

Special production runs require minimum order quantities of 5,000 feet for sizes less than 1 1/2" and 600 feet for 1 1/2" and larger. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

63SB Air & Vapor Duct

Air Duct Hose

(Specification 4663A) Part No. 301200 301201 301202 301203 301204 301205 301206 301207 301208 301209 301210 301212 301213 301214 301215 301216 301217 301218 301221 301222 301223 301224 301225 301226

Nom. I.D. (ln.) 5/8 3/4 7/8 1 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 3 3 1/2 3 5/8 4 4 1/2 5 5 1/2

Nom. O.D. (mm) 16.0 19.0 22.2 25.4 31.8 34.9 38.0 41.0 44.0 48.0 51.0 54.0 57.0 60.0 63.0 67.0 70.0 76.0 89.0 92.0 102.0 114.0 127.0 140.0

(ln.) .85 .97 1.02 1.15 1.40 1.52 1.65 1.78 1.91 2.03 2.16 2.28 2.41 2.53 2.66 2.78 2.91 3.16 3.66 3.78 4.16 4.70 5.20 5.70

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

HOSE ENDS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS:

Max. W.P. (mm) 21.6 24.6 25.9 29.2 35.6 38.6 41.9 45.2 48.5 51.6 54.9 57.9 61.2 64.3 67.6 70.6 73.9 80.3 93.0 96.0 105.7 119.4 132.1 144.8

(psi) 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5

Min. Bend Radius

Suction (MPa) .07 .07 .07 .07 .07 .07 .07 .07 .07 .07 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04

(ln. Hg) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

(mm Hg) 127 127 127 127 127 127 127 127 127 127 76 76 76 76 76 76 76 76 76 76 76 76 76 76

(ln.) 1.0 1.0 1.0 1.0 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 3.0 3.0 3.0 3.5 3.5 4.0 4.5 5.0 6.0

Wt. Per Ft. (mm) 25 25 25 25 38 38 38 50 50 50 50 50 63 63 63 76 76 76 88 88 102 114 127 152

(Lbs.) .10 .11 .14 .16 .20 .22 .24 .25 .27 .29 .30 .32 .34 .35 .38 .39 .41 .44 .51 .53 .75 .84 .93 1.02

(Kg) .05 .05 .06 .07 .09 .10 .11 .11 .12 .13 .14 .15 .15 .16 .17 .18 .19 .20 .23 .24 .34 .38 .42 .46

Standard

Stock (X) or Minimum

Gates

List Price

Pack 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft.

Order Qty. X X X X X X X X X X X X X X X X X X X X X X X X

Item No. 4663-4000 4663-4001 4663-4002 4663-4003 4663-4004 4663-4005 4663-4006 4663-4007 4663-4008 4663-4009 4663-4010 4663-4011 4663-4012 4663-4013 4663-4014 4663-4015 4663-4016 4663-4017 4663-4018 4663-4019 4663-4020 4663-4021 4663-4022 4663-4023

Per Ft. $9.97 11.08 11.57 11.90 13.06 13.45 13.73 14.32 14.66 15.12 15.56 16.15 16.82 17.23 17.71 18.43 19.13 19.95 21.67 22.63 24.09 39.52 42.88 45.84

Heating and ventilating applications, such as air intake for butane conversion units, air and heater ducts, defroster lines, air cleaner connections to carburetor, exhaust ducts, vent lines for trailer sewers and drains. For standard duty applications. -40ºF to +212ºF (-40ºC to +100ºC) continuous service. Tube: Type A (Neoprene). Black. Reinforcement: Rubber impregnated synthetic, high tensile textile over wire helix. Cover: None (See Reinforcement). Plain End. Straight or Enlarged Ends on special order. 10' per carton. Printed patch label every 2 feet with I.D. only. Special production runs require minimum order quantities of one piece. Lengths can be as short as one foot, but minimum billing is ten feet. For enlarged or straight ends, contact Denver Industrial Hose Marketing for pricing. None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

163SB Air & Vapor Duct

Air Duct Hose

(Specification 4663J) Part No. 301301 301303 301304 301305 301306 301307 301308 301309 301310 301312 301313 301314 301315 301316 301317 301318 301319 301320 301321 301322 301323 301324 301325

Nom. I.D. (ln.) 3/4 1 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 3 3 1/8 3 1/2 4 4 1/2 5 5 1/2 6

Nom. O.D. (mm) 19.0 25.4 31.8 34.9 38.0 41.0 44.0 48.0 51.0 54.0 57.0 60.0 63.0 67.0 70.0 76.0 79.0 89.0 102.0 114.0 127.0 140.0 152.0

Max. W.P.

(ln.) .97 1.22 1.47 1.60 1.79 1.86 1.98 2.11 2.23 2.40 2.48 2.61 2.73 2.86 2.98 3.23 3.35 3.73 4.23 4.73 5.23 5.73 6.23

(mm) 24.6 31.0 37.3 40.6 45.5 47.2 50.3 53.6 56.6 61.0 63.0 66.3 69.3 72.6 75.7 82.0 85.1 94.7 107.4 120.1 132.8 145.5 158.2

(psi) 20 20 20 18 15 15 15 15 15 10 10 10 10 10 10 10 10 10 10 10 10 10 8

Min. Bend Radius

Suction (MPa) .14 .14 .14 .12 .10 .10 .10 .10 .10 .07 .07 .07 .07 .07 .07 .07 .07 .07 .07 .07 .07 .07 .06

(ln. Hg) 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 7.0 7.0 7.0 7.0 7.0 6.0 6.0 6.0

(mm Hg) 381 381 381 381 381 381 381 381 381 381 381 381 381 381 381 178 178 178 178 178 152 152 152

(ln.) 1.0 1.0 1.5 1.5 3.0 3.0 3.0 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 5.5 5.5 6.0 8.0 9.0 10.0 12.0 18.0

Wt. Per Ft. (mm) 25 25 38 38 76 76 76 88 102 102 114 114 127 127 127 140 140 152 203 229 254 305 457

(Lbs.) .18 .23 .31 .34 .36 .39 .42 .45 .46 .50 .52 .55 .57 .60 .62 .67 .70 .77 .87 1.08 1.20 1.31 1.42

(Kg) .08 .10 .14 .15 .16 .18 .19 .20 .21 .23 .24 .25 .26 .27 .28 .30 .32 .35 .40 .49 .54 .59 .64

Standard

Stock (X) or Minimum

Gates

List Price

Pack 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft.

Order Qty. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft.

Item No. 4663-1516 4663-1518 4663-1530 4663-3321 4663-1540 4663-1543 4663-3954 4663-1548 4663-1550 4663-3461 4663-1556 4663-1560 4663-1565 4663-1615 4663-3456 4663-1570 4663-1569 4663-1575 4663-1580 4663-1589 4663-1595 4663-3454 4663-1599

Per Ft. $13.85 14.88 16.32 16.81 17.16 17.90 18.32 18.90 19.44 20.18 21.02 21.53 22.14 23.04 23.91 24.94 25.81 27.09 30.11 49.40 53.60 57.30 61.19

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type A (Neoprene). Black. Reinforcement: Multiple plies of synthetic, high tensile textile with wire helix. Cver: Type A (Neoprene). Black. Plan End. Straight or Enlarged Ends on special order.

HOSE ENDS:

10' per carton.

PACKAGING:

Printed patch label every 2 feet with I.D. only.

BRANDING: SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of one piece. Lengths can be as short as one foot, but minimum billing is ten feet. For enlarged or straight ends, contact Denver Industrial Hose Marketing for pricing None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

690SB Bulk Commodity

Food and Beverage Hose

(Specification 4693B) Part No. 306350 306352 306354 306356 306358 306360 306361

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 4 5 6

(mm) 38.0 51.0 63.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 2.23 2.75 3.23 3.75 4.71 5.75 6.91

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

(mm) 56.6 69.8 82.0 95.3 120.0 146.0 175.5

Max. W.P. (psi) 150 150 125 100 75 55 50

(MPa) 1.03 1.03 .86 .69 .52 .38 .34

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 10.0 12.0 15.0 18.0 24.0 30.0 36.0

(mm) 254 305 381 457 610 762 914

Wt. Per Ft. (Lbs.) 1.41 1.88 2.25 2.73 3.51 4.30 7.08

All lengths coiled and wrapped in polyethylene.

STANDARDS:

Continuous transfer label. Example: “ 3/16 Inch Tube Made In U.S.A.”

690SB Food-Beverage Transfer Meets FDA 100 PSI (.69MPa)

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability. Tube meets FDA requirements.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $20.70 26.70 31.86 36.00 43.18 58.39 70.96

Tube: Type D2 (Natural Rubber). Sanitary FDA. White. 3/16" thick. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type D3 (Natural Rubber). Gray corrugated with burgundy spiral stripe.

PACKAGING:

REMNANT LENGTHS:

Gates Item No. 4693-0205 4693-0210 4693-0220 4693-0225 4693-0235 4693-0251 4693-0260

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

*, 6 *, 7 *, 8 or 49 . Reference pages 108-117. *Can be used only at 50% of rated working pressure.

SPECIAL ORDER REQUIREMENTS:

Stock (X) or Minimum Order Qty. X X X X X X X

Transfer of bulk food products via suction, pneumatic or gravity systems where FDA sanitary tube is required. Examples: Flour, sugar, syrup and edible grains. (Not recommended for vinegar, mustard or other compounds containing acetic acid.)

COUPLINGS:

BRANDING:

(Kg) .64 .85 1.02 1.24 1.59 1.95 3.21

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft. 50 ft.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

692SB Bulk Commodity

Food and Beverage Hose

(Specification 4693R) Part No. 306451 306453 306454 306460 306461 306457

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 4 6

(mm) 38.0 51.0 63.0 76.0 102.0 152.0

Nom. O.D. (ln.) 2.07 2.60 2.85 3.52 4.55 6.74

(mm) 52.6 66.0 72.4 89.4 116.0 171.0

Max. W.P (psi) 150 150 125 125 75 50

(MPa)) 1.03 1.03 .86 .86 .52 .34

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635

Min. Bend Radius (ln.) 9.0 12.0 15.0 18.0 24.0 36.0

(mm) 229 305 381 457 610 914

Wt. Per Ft. (Lbs.) 1.13 1.46 1.77 2.20 2.96 5.61

(Kg) .51 .66 .80 1.00 1.34 2.55

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 200 ft.

Gates Item No. 4693-0105 4693-0110 4693-0116 4693-0125 4693-0135 4693-0160

List Price Per Ft. $23.43 31.05 36.84 41.40 51.86 81.59

Animal fat, vegetable oil and other edible oils at temperatures up to 180ºF requiring FDA sanitary hose. Also for soybeans, vinegar, mustard, cider, salad dressings and other acetic acid applications.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC) continuous service.

TEMPERATURE:

Tube: Type A2 (Neoprene). Sanitary FDA. White. 1/8" thick. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type A (Neoprene). Tan corrugated with burgundy spiral stripe.

CONSTRUCTION:

COUPLINGS:

5 *, 6 *, 7 *, or 8 (on 3/8" tube thickness) or *Can be used only at 50% of rated working pressure.

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

692SB Edible Fats-Oils Transfer Meets FDA 125 PSI (.86MPa)

REMNANT LENGTHS:

Tube meets FDA requirements, 3A Standards and USDA.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #6 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 200CL

Food and Beverage Hose

(Specification 7744) Part No. 333000 333001 333002 333003 333004 333005 333006

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.29 1.56 1.84 2.39 2.92 3.46 4.56

Max. W.P.* (psi) 100 90 90 70 65 60 50

(mm) 32.8 39.6 46.7 60.7 74.2 87.9 115.8

(MPa)) .69 .62 .62 .48 .45 .41 .34

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 3.0 4.0 5.0 6.0 8.0 9.0 12.0

(mm) 76 102 127 152 203 229 305

Wt. Per Ft. (Lbs.) .30 .38 .48 .70 .97 1.27 2.00

(Kg) .14 .17 .22 .32 .44 .58 .91

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 7744-4101 7744-4102 7744-4103 7744-4104 7744-4105 7744-4106 7744-4107

List Price Per Ft. $3.64 4.61 5.04 7.68 10.96 13.99 24.07

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR:

Transfer of bulk food products via suction, pneumatic or gravity systems where sanitary hose is required.

TEMPERATURE:

-10ºF to +130ºF (-23ºC to +55ºC) continuous service.

CONSTRUCTION:

Tube: Type G (PVC). Sanitary FDA. Clear. Reinforcement: Rigid thermoplastic reinforcement. Cover: Smooth. Clear.

COUPLINGS: PACKAGING: BRANDING:

, or

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Unlabeled.

SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

STANDARDS:

Meets FDA requirements, 3A Standards and USDA.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #19 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 201CR

Food and Beverage Hose

(Specification 7744) Part No. 306590 306591 306592 306593 306594 306595 306596

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.26 1.61 1.82 2.44 2.98 3.54 4.65

Max. W.P.* (psi) 40 50 50 40 40 35 35

(mm) 32.0 40.9 46.2 62.0 75.7 90.0 118.1

(MPa) .28 .34 .34 .28 .28 .24 .24

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 2.0 3.0 3.0 4.0 5.0 6.0 8.0

(mm) 51 76 76 102 127 152 203

Wt. Per Ft. (Lbs.) .14 .31 .37 .57 .77 1.04 1.65

(Kg) .06 .14 .17 .26 .35 .47 .75

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 7744-4301 7744-4302 7744-4303 7744-4304 7744-4305 7744-4306 7744-4307

List Price Per Ft. $3.32 3.59 4.22 5.82 9.38 12.11 22.07

*Working pressure and suction at +72ºF (+22ºC).

Transfer of bulk food products via suction, pneumatic or gravity systems where sanitary hose is required.

RECOMMENDED FOR:

-10ºF to +130ºF (-23ºC to +55ºC) continuous service.

TEMPERATURE:

Tube: Type G (PVC). Sanitary FDA. Clear. Reinforcement: Rigid thermoplastic helix. Clear. Cover: Corrugated. Clear.

CONSTRUCTION:

COUPLINGS:

, or

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING:

Unlabeled.

BRANDING: SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None. Meets FDA requirements, and USDA.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #20 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 202SW

Food and Beverage Hose

(Specification 7744) Part No. 306620 306621 306622 306623

Nom. I.D. (ln.) 2 2 1/2 3 4

(mm) 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 2.37 3.01 3.05 4.54

Max. W.P.* (psi) 40 40 35 35

(mm) 60.2 76.5 77.5 115.3

(MPa) .28 .28 .24 .24

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 4.0 4.0 6.0 8.0

(mm) 102 102 142 203

Wt. Per Ft. (Lbs.) .48 .92 1.02 1.36

(Kg) .22 .42 .46 .62

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X

Gates Item No. 7744-4420 7774-4425 7744-4430 7744-4440

List Price Per Ft. $10.86 14.26 19.02 27.27

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING:

Transfer of bulk food products via suction, pneumatic or gravity systems where sanitary hose is required. Used in pneumatic conveying systems for powders, pellets or granular materials where a static conductive hose is needed. -10ºF to +130ºF (-23ºC to +55ºC) continuous service. Tube: Type G (PVC). Sanitary FDA. Clear. Reinforcement: Rigid thermoplastic helix. Clear. Embedded static wire to prevent a build up of static electricity. 1

, or

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Unlabeled.

SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

STANDARDS:

Meets FDA requirements and USDA.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000

June 3, 2002

Industrial Hose Products/List Prices

Supersedes 39496-000 January 2, 1998

610W Bulk Commodity

Food and Beverage Hose

(Specification 3132D) Part No. 306553 306555 306556

Nom. I.D. (ln.) 4 5 6

(mm) 102.0 127.0 152.0

Nom. O.D. (ln.) 4.56 5.56 6.56

Max. W.P. (psi) 40 30 25

(mm) 116.0 141.0 167.0

(MPa) .28 .21 .17

Suction (ln. Hg) (mm Hg) — — — — — —

Min. Bend Radius (ln.) 48.0 60.0 72.0

(mm) 1219 1524 1829

Wt. Per Ft. (Lbs.) 2.22 2.73 3.25

(Kg) 1.01 1.24 1.47

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 3132-0782 3132-0793 3132-0797

List Price Per Ft. $36.67 47.18 57.63

Pneumatic transfer of flour and other dry foods requiring hose with a sanitary FDA tube.

RECOMMENDED FOR:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

TEMPERATURE:

Tube: Type D2 (Natural Rubber). Sanitary FDA. White. 3/16" thick. Reinforcement: Synthetic, high tensile textile with static conductor. Cover: Type D3 (Natural Rubber). Gray with burgundy spiral stripe.

CONSTRUCTION:

COUPLINGS:

, or

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

610W Dry Food Transfer Meets FDA 40 PSI (.28MPa) WP Made

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Tube meets FDA requirements.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Food Master® Lite™

Food and Beverage Hose

(Specification 3133) Part No. 306300 306301 306302 306303 306304 306305 306306 306307

Nom. I.D. (ln.) 3/4 1 1 1/2 2 2 1/2 3 4 6

(mm) 19.0 25.4 38.0 51.0 63.0 76.0 102.0 152.0

Nom. O.D. (ln.) 1.33 1.58 2.10 2.60 3.13 3.63 4.65 6.74

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS: STANDARDS:

(mm) 33.8 40.1 53.3 66.0 79.5 92.2 118.0 171.0

Max. W.P. (psi) 150 150 150 150 150 150 150 150

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 2.0 3.0 4.5 6.0 12.0 18.0 24.0 36.0

(mm) 50 76 114 152 305 457 610 914

Wt. Per Ft. (Lbs.) .65 .79 1.14 1.50 1.98 2.35 3.12 5.60

(Kg) .30 .36 .52 .68 .90 1.07 1.42 2.55

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X

Gates Item No. 3133-0001 3133-0002 3133-0003 3133-0004 3133-0005 3133-0006 3133-0007 3133-0008

Tank truck, barge, ship, or storage tank transfer of a variety of food products such as animal fat, vegetable oil and other edible oils at temperatures up to 230ºF requiring FDA sanitary hose. Also suitable for ice cream and other dairy products requiring 3A-Class 3 standards. -40ºF to +230ºF (-40ºC to +110ºC) continuous service. Tube: Type C2 (Modified Nitrile). Sanitary FDA and 3A-Class 3. White. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type C2 (Modified Nitrile). White corrugated with burgundy spiral stripe. 1

or stainless steel,

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Continuous transfer label. Example: “ (1.03MPa) WP Made In U.S.A.”

Food Master® Lite™

Meets FDA, 3A and USDA 150 PSI

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $13.27 16.42 19.43 27.51 35.98 39.33 49.27 77.51

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Sani-Pure™

Food and Beverage Hose

(Specification 3131) Part No. 306315 306316 306317 306318 306319 306320

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 4 6

(mm) 38.0 51.0 63.0 76.0 102.0 152.0

Nom. O.D. (ln.) 2.07 2.57 3.08 3.58 4.61 6.64

(mm) 52.6 65.3 78.2 90.9 117.0 169.0

Max. W.P. (psi) 150 150 150 150 150 150

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03

Suction (ln. Hg) (mm Hg) — — — — — — — — — — — —

Min. Bend Radius (ln.) 18.0 24.0 30.0 36.0 48.0 72.0

(mm) 457 610 762 914 1219 1829

Wt. Per Ft. (Lbs.) .97 1.25 1.65 1.90 2.77 4.10

(Kg) .44 .57 .75 .86 1.26 1.86

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft.

Gates Item No. 3131-0001 3131-0002 3131-0003 3131-0004 3131-0005 3131-0006

List Price Per Ft. $17.90 22.05 28.16 31.79 45.25 72.27

Tank truck, barge, ship, or storage tank transfer (discharge only) of a variety of food products such as animal fat, vegetable oil and other edible oils at temperatures up to 230ºF requiring FDA sanitary hose. Also suitable for ice cream and other dairy products requiring 3A-Class 3 standards.

RECOMMENDED FOR:

-40ºF to +230ºF (-40ºC to +110ºC) continuous service.

TEMPERATURE:

Tube: Type C2 (Modified Nitrile). Sanitary FDA and 3A-Class 3. White. Reinforcement: Synthetic, high tensile textile. Cover: Type C2 (Modified Nitrile). White with burgundy spiral stripe.

CONSTRUCTION:

COUPLINGS:

or stainless steel,

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ (1.03MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Sani-Pure™

Meets FDA, 3A and USDA 150 PSI

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Gray cover is made to order and requires minimum production order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". For price, add 10% (x1.10) to above prices. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Tube meets FDA requirements, 3A-Class 3 and USDA.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices __-

Food & Beverage Master®

Food and Beverage Hose

(Specification 3132C/3132H) White Cover (3132C) Part No. 306390 306391 306392 306393 306394 306395 306396

Nom. I.D. (ln.) 3/4 1 1 1/2 2 2 1/2 3 4

(mm) 19.0 25.4 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.22 1.48 2.07 2.62 3.25 3.86 4.88

(mm) 31.0 37.6 52.6 66.5 82.5 98.0 124.0

Max. W.P. (psi) 250 250 250 250 250 250 250

(mm) 31.0 37.6 52.6 66.5 82.5 98.0 124.0

Max. W.P. (psi) 250 250 250 250 250 250 250

(MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 2.0 3.0 4.5 6.0 12.0 18.0 36.0

(MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 2.0 3.0 4.5 6.0 12.0 18.0 36.0

(mm) 50 76 114 152 305 457 914

Wt. Per Ft. (Lbs.) .42 .52 .90 1.20 1.81 2.46 3.24

(mm) 50 76 114 152 305 457 914

Wt. Per Ft. (Lbs.) .42 .52 .90 1.20 1.81 2.47 3.24

(Kg) .19 .24 .41 .54 .82 1.12 1.47

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 3132-0222 3132-0216 3132-0217 3132-0218 3132-0219 3132-0220 3132-0221

List Price Per Ft. $21.74 27.21 30.87 38.63 51.75 57.21 83.12

(Kg) .19 .24 .41 .54 .82 1.12 1.47

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft.

Gates Item No. 3132-0263 3132-0264 3132-0265 3132-0266 3132-0267 3132-0268 3132-0269

List Price Per Ft. $21.74 27.21 30.87 38.63 51.75 57.21 83.12

Gray Cover (3132H) Part No. 306410 306411 306412 306413 306414 306415 306416

Nom. I.D. (ln.) 3/4 1 1 1/2 2 2 1/2 3 4

(mm) 19.0 25.4 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.22 1.48 2.07 2.62 3.25 3.86 4.88

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS:

Transfer of milk, juice, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. Food & Beverage Master is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. -40ºF to +230ºF (-40ºC to +110ºC) continuous service. Tube: Sanitron™. White. Reinforcement: Synthetic, high tensile textile with static conductive filament; resilient monofilament helix providing crush and kink resistance. Cover: Type P (EPDM). White or gray with burgundy spiral stripe. 1

or stainless steel,

PACKAGING:

100' length coiled and wrapped in polyethylene.

BRANDING:

Continuous transfer label. Example: “ USDA 250 PSI WP (1.72MPa) Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

. Reference pages 107-117.

Food & Beverage Master® Meets FDA, 3A and

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability. Meets FDA Requirements, 3A-Class 3 and USDA.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Brew Master®

Food and Beverage Hose

(Specification 3132C) Part No. 306425 306426 306427 306428 306429 306430 306431

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.48 1.88 2.07 2.62 3.25 3.86 4.88

(mm) 37.6 47.8 52.6 66.5 82.5 98.0 124.0

Max. W.P. (psi) 250 250 250 250 250 250 250

(MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 3.0 4.0 4.5 6.0 12.0 18.0 36.0

(mm) 76 102 114 152 305 457 914

Wt. Per Ft. (Lbs.) .52 .78 .90 1.20 1.81 2.46 3.24

(Kg) .24 .35 .41 .54 .82 1.12 1.47

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft.

Gates Item No. 3132-0193 3132-0194 3132-0195 3132-0196 3132-0198 3132-0197 3132-0199

List Price Per Ft. $27.21 28.36 30.87 38.63 51.75 57.21 83.12

Beer, ale or water based products requiring an FDA sanitary hose.

RECOMMENDED FOR:

-40ºF to +230ºF (-40ºC to +110ºC) continuous service.

TEMPERATURE:

Tube: Sanitron™. White. Reinforcement: Synthetic, high tensile textile with resilient monofilament helix providing crush and kink resistance. Cover: Type P (EPDM). White with burgundy spiral stripe.

CONSTRUCTION:

COUPLINGS:

or stainless steel,

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene.

PACKAGING:

Continuous transfer label. Example: “ WP Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Brew Master® Meets FDA, 3A and USDA 250 PSI (1.72MPa)

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Meets FDA requirements, 3A-Class 3 and USDA.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Cellar Master®

Food and Beverage Hose

(Specification 3132C) Part No. 306525 306526 306527 306528 306529 306530 306531

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 1.48 1.88 2.07 2.62 3.25 3.86 4.88

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(mm) 37.6 47.8 52.6 66.5 82.5 98.0 124.0

Max. W.P. (psi) 250 250 250 250 250 250 250

(MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 3.0 4.0 4.5 6.0 12.0 18.0 36.0

(mm) 76 102 114 152 305 457 914

Wt. Per Ft. (Lbs.) .52 .78 .90 1.20 1.81 2.46 3.24

(Kg) .24 .35 .41 .54 .82 1.12 1.47

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. X 400 ft. X 400 ft.

Gates Item No. 3132-0180 3132-0185 3132-0181 3132-0182 3132-0186 3132-0183 3132-0184

Wine or water based products requiring an FDA sanitary hose. -40ºF to +230ºF (-40ºC to +110ºC) continuous service. Tube: Sanitron™. White. Reinforcement: Synthetic, high tensile textile with resilient monofilament helix providing crush and kink resistance. Cover: Type P (EPDM). White with burgundy spiral stripe. 1

or stainless steel,

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene. Continuous transfer label. Example: “ (1.72MPa) WP Made In U.S.A.”

Cellar Master® Meets FDA, 3A and USDA 250 PSI

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability. Meets FDA requirements, 3A-Class 3 and USDA.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $27.21 28.36 30.87 38.63 51.75 57.21 83.12

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #21 December, 2001

Industrial Hose Products/List Prices

Tufflex® Food

Food and Beverage Hose

(Specification 7744) Part No. 306640 306641 306642 306643 306644 306645 306646 306647 306648

Nom. I.D. (ln.) 1/4 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2 2

(mm) 6.3 9.5 12.7 16.0 19.0 25.4 31.8 38.0 51.0

Nom. O.D. (ln.) .47 .63 .75 .88 1.03 1.31 1.75 2.00 2.50

(mm) 11.9 16.0 19.1 22.4 26.2 33.3 44.5 50.8 63.5

Max. W.P.* (psi) 250 200 200 200 150 125 100 75 75

(MPa) 1.72 1.38 1.38 1.38 1.03 .86 .69 .52 .52

Suction* (ln. Hg.) (mm Hg) — — — — — — — — — — — — — — — — — —

Min. Bend Radius (ln.) — — — — — — — — —

(mm) — — — — — — — — —

Wt. Per Ft. (Lbs.) .07 .09 .14 .16 .21 .32 .61 .72 1.00

(Kg) .03 .04 .06 .07 .10 .15 .28 .33 .45

Standard Pack 300 ft. 300 ft. 300 ft. 300 ft. 300 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X 1,000 ft. 1,000 ft. 1,000 ft.

Gates Item No. 7744-4501 7744-4502 7744-4503 7744-4504 7744-4505 7744-4506 7744-4507 7744-4508 7744-4509

List Price Per Ft. $.78 1.05 1.25 1.60 1.88 3.13 5.66 7.42 10.35

*Working pressure and suction at +72ºF (+22ºC).

Transferring compressed liquid and air in food and beverage applications. Approved for use in USDA meat and poultry plants. Non-toxic, FDA formula approved for food processing.

RECOMMENDED FOR:

-10ºF to +130ºF (-23ºC to +55ºC) continuous service.

TEMPERATURE:

COUPLINGS:

Tube: Type G (PVC). Non-toxic. Clear. Reinforcement: Synthetic reinforcement. Cover: Type G (PVC). Non-toxic. Clear. Stainless Steel Food Grade.

PACKAGING:

All lengths coiled and wrapped in polyethylene.

CONSTRUCTION:

“Made In Japan”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 1,000 feet per size. No deviations allowed to above product. None.

REMNANT LENGTHS:

Meets FDA requirements and USDA.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Heat Master®

Food and Beverage Hose

Hot Food Oil (Aramid Fiber Reinforced) (Specification 3239S) Part No. 306475 306477

Nom. I.D. (ln.) 1/2 3/4

(mm) 12.7 19.0

Nom. O.D. (ln.) .95 1.23

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Max. W.P. (psi) 100 100

(mm) 24.1 31.2

(MPa) .69 .69

Suction (ln. Hg) (mm Hg) 20.0 508 15.0 381

Min. Bend Radius (ln.) 5.0 6.0

(mm) 127 152

Wt. Per Ft. (Lbs.) .32 .47

(Kg) .15 .21

Standard Pack REEL REEL

Stock (X) or Minimum Order Qty. X X

Gates Item No. 3239-0602 3239-0621

Batch hot food oil applications such as filter systems for deep fat fryers. 0ºF to +300ºF (-18ºC to +149ºC) continuous service. To 350ºF (177ºC), intermittent service. Contact Denver Product Application (303) 744-5070 for any application above 300ºF (149ºC). Tube: Type C (Nitrile). Sanitary FDA. White. Reinforcement: Braided, high tensile textile cord. Cover: Type C (Nitrile). White. 8

or special couplings required by users. Reference pages 108-117.

Packaged in 450' to 650' reels. Maximum 4 pieces. Minimum length 50'. 1 length under 100'. Continuous ink brand. Example: “ Heat Master® Nitrile/Aramid NSF51 1/2 Inch (12.7mm) 100 PSI (.69MPa) WP at 300ºF (149ºC) Constant [350ºF (177ºC) Intermittent]. Made In U.S.A.” Special production runs require minimum order quantities of 25,000 feet per size. None. Tube meets FDA requirements and National Sanitation Foundation (NSF)51.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $9.36 12.48

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

429W

Material Handling Hose

Sand Blast

(Specification 4129A) Part No. 306013 306001 306002 306003 306006 306007 306011

Nom. I.D. (ln.) 1/2 3/4 1 1 1 1/4 1 1/2 2

(mm) 12.7 19.0 25.4 25.4 31.8 38.0 51.0

Nom. O.D. (ln.) 1.23 1.50 1.63 1.87 2.16 2.37 2.94

Maxi. W.P. (psi) 150 150 150 150 150 135 120

(mm) 31.2 38.1 41.4 47.5 54.9 60.2 74.7

(MPa)) 1.03 1.03 1.03 1.03 1.03 .93 .83

Suction (ln. Hg) (mm Hg) 25.0 635 15.0 381 127 5.0 127 5.0 127 5.0 127 5.0 5.0 127

Min. Bend Radius (ln.) 5.0 8.0 12.0 12.0 12.0 18.0 20.0

(mm) 127 203 305 305 305 457 508

Wt. Per Ft. (Lbs.) .55 .70 .70 1.01 1.22 1.37 1.82

(Kg) .25 .32 .32 .46 .55 .62 .83

Standard Pack 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 4129-0085 4129-0086 4129-0256 4129-0100 4129-0105 4129-0150 4129-0200

List Price Per Ft. $7.64 10.00 12.35 14.06 16.88 18.80 23.81

Sand, shot blasting work and wherever abrasive materials are carried at high velocity.

RECOMMENDED FOR:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type D3 (Natural Rubber). Black. Static conductive. Reinforcement: Synthetic, high tensile textile. Cover: Type D (SBR). Black with yellow spiral stripe. All sizes are perforated.

COUPLINGS:

. Reference pages 108-117.

50' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “

SPECIAL ORDER REQUIREMENTS:

429W Sandblast 150 PSI (1.03MPa) WP Made In Mexico”

Special production runs require minimum order quantities of 500 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. All sizes are wrapped construction, 50 foot maximum length. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Hot Air Blower

Material Handling Hose

(Specification 4691HA) Part No. 305601 305602 305603 305604 305605 305606 305607 305608

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 3 1/2 4 5 6

(mm) 38.0 51.0 63.0 76.0 89.0 102.0 127.0 152.0

Nom. O.D. (ln.) 2.08 2.58 3.08 3.64 4.14 4.64 5.74 6.74

RECOMMENDED FOR: TEMPERATURE:

CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS:

Max. W.P. (psi) 130 125 110 100 85 75 55 40

(mm) 52.8 65.5 78.2 92.5 105.0 118.0 146.0 171.0

(MPa) .90 .86 .76 .69 .59 .52 .38 .28

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 30.0 762 30.0 762

Min. Bend Radius (ln.) 8.0 9.0 14.0 18.0 21.0 24.0 30.0 36.0

(mm) 203.0 229.0 356.0 457.0 533.0 610.0 762.0 914.0

Wt. Per Ft. (Lbs.) .89 1.13 1.43 1.89 2.17 2.44 3.82 4.52

(Kg) .40 .51 .65 .86 .99 1.11 1.73 2.05

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X

Gates Item No. 4691-0501 4691-0502 4691-0503 4691-0504 4691-0505 4691-0506 4691-0507 4691-0508

Conveying hot air up to 350ºF from blower or compressor to storage tank used in the transfer of dry bulk commodities. Can also be used for transferring mild chemicals at ambient temperatures. -40ºF to +350ºF (-40ºC to +177ºC) for hot air service. -40ºF to +125ºF (-40ºC to +52ºC) for mild chemical transfer. For chemicals above 125ºF or suitability for use with a specific chemical, contact Denver Product Application at (303) 744-5070. Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Black with yellow spiral stripe. 5

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene. Continuous transfer label. Example: “

Hot Air Blower 130 PSI (.90MPa) WP Made In U.S.A.”

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $16.02 17.55 21.00 24.81 28.04 30.81 41.26 47.44

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

609W

Material Handling Hose

Dry Cement Delivery

(Specification 3129F, 3129H,3129L) 1/8" Tube Thickness (3129L) Part No. 305902 305903 305904 305905 305906 305907

Nom. I.D. (ln.) 3 4 4 1/2 5 6 6 5/8

(mm) 76.0 102.0 114.0 127.0 152.0 168.0

Nom. O.D. (ln.) 3.47 4.47 4.97 5.47 6.47 7.10

Max. W.P. (psi) 40 40 35 30 25 20

(mm) 88.1 114.0 126.0 139.0 164.0 180.0

(MPa) .28 .28 .24 .21 .17 .14

Suction (ln. Hg) (mm Hg) — — — — — — — — — — — —

Min. Bend Radius (ln.) 36.0 48.0 54.0 60.0 72.0 72.0

(MPa)) .41

Suction (ln. Hg) (mm Hg) — —

Min. Bend Radius (ln.) 48.0

(MPa) .41

Suction (ln. Hg) (mm Hg) — —

Min. Bend Radius (ln.) 48.0

(mm) 914 1219 1372 1524 1829 1829

Wt. Per Ft. (Lbs.) 1.30 1.69 1.89 2.09 2.48 2.73

(mm) 1219

Wt. Per Ft. (Lbs.) 2.21

(mm) 1219

Wt. Per Ft. (Lbs.) 2.69

(Kg) .59 .77 .86 .95 1.13 1.24

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X 200 ft.

Gates Item No. 3129-0660 3129-0670 3129-0675 3129-0680 3129-0690 3129-0700

List Price Per Ft. $17.34 20.19 21.81 23.86 28.52 32.11

(Kg) 1.00

Standard Pack 100 ft.

Stock (X) or Minimum Order Qty. X

Gates Item No. 3129-0790

List Price Per Ft. $23.22

(Kg) 1.22

Standard Pack 100 ft.

Stock (X) or Minimum Order Qty. X

Gates Item No. 3129-0570

List Price Per Ft. $26.25

3/16" Tube Thickness (3129H) Part No. 305915

Nom. I.D. (ln.) 4

(mm) 102.0

Nom. O.D. (ln.) 4.61

Max. W.P. (psi) 60

(mm) 117.1

1/4" Tube Thickness (3129F) Part No. 305925

Nom. I.D. (ln.) 4

(mm) 102.0

Nom. O.D. (ln.) 4.73

Max. W.P. (psi) 60

(mm) 120.0

Pneumatic transfer of bulk cement and other dry bulk materials.

RECOMMENDED FOR:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type D3 (Natural Rubber). Black. Static conductive. Reinforcement: Synthetic, high tensile textile. Cover: Type D (SBR). Black with gray spiral stripe.

COUPLINGS:

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ 40 PSI (.28MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

609W Dry Cement Delivery — Static Conductive Tube

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

688SB

Material Handling Hose

Bulk Commodity (Specification 4691L)

Part No. 305800 305802 305803 305804 305805 305807

Nom. I.D. (ln.) 2 3 4 4 1/2 5 6

(mm) 51.0 76.0 102.0 114.0 127.0 152.0

Nom. O.D. (ln.) 2.77 3.81 4.77 5.27 5.77 6.76

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P. (psi) 60 60 45 40 40 40

(mm) 70.4 96.8 121.2 133.9 146.6 171.7

(MPa) .41 .41 .31 .28 .28 .28

Suction (ln. Hg) (mm Hg) 762 30.0 30.0 762 762 30.0 762 30.0 762 30.0 762 30.0

Min. Bend Radius (ln.) 16.0 24.0 32.0 36.0 40.0 48.0

(mm) 406 610 813 914 1016 1219

Wt. Per Ft. (Lbs.) 1.65 2.54 3.21 3.57 3.93 4.65

(Kg) .75 1.15 1.46 1.62 1.78 2.11

Standard Pack 100 ft. 100 ft. 100 ft. 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X

Gates Item No. 4691-0305 4691-0325 4691-0340 4691-0355 4691-0360 4691-0346

Transfer of bulk materials via suction, gravity or pneumatic systems where abrasion resistance is the primary requirement. Examples: Dry cement, sand, gravel, feed, seed and slurries. -40ºF to +150ºF (-40ºC to +66ºC) continuous service. Tube: Type D3 (Natural Rubber). Black. Static conductive. 3/16" thick. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type D (SBR). Black corrugated with gray spiral stripe. 5

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Continuous transfer label. Example: “ U.S.A.”

688SB Wet-Dry Bulk Commodity 60 PSI (.41MPa) WP Made In

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $24.70 33.91 44.26 52.66 57.20 62.23

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #7 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 300 EPDM

Material Handling Hose

(Specification 7744) Part

Nom. I.D.

No. 333140 333141 333142 333143 333144 333145 333146 333147

(ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 6

Nom. O.D. (mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 152.0

Max. W.P.*

(ln.) 1.34 1.61 1.96 2.49 3.00 3.60 4.69 6.86

(mm) 34.0 40.9 49.8 63.2 76.2 91.4 119.1 174.2

Suction*

(psi) 80 70 60 60 50 50 45 35

(MPa) .55 .48 .41 .41 .34 .34 .31 .24

(ln. Hg.) (mm Hg) 711 28.0 711 28.0 711 28.0 28.0 711 28.0 711 711 28.0 28.0 711 28.0 711

Min. Bend Radius (ln.) 4.0 5.0 6.0 9.0 11.0 12.0 17.0 27.0

Wt. Per Ft. (mm) 102 127 152 229 279 305 432 686

(Lbs.) .20 .30 .40 .70 .90 1.10 1.80 3.10

(Kg) .09 .14 .18 .32 .41 .50 .82 1.41

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Order Qty. X X X X X X X X

Item No. 7744-5201 7744-5202 7744-5203 7744-5204 7744-5205 7744-5206 7744-5207 7744-5208

Per Ft. $3.17 4.30 4.82 6.88 10.48 13.25 22.23 37.19

*Working pressure and suction at +72ºF (+22ºC)

Suction and discharge applications where lightweight, flexible hose is needed for transferring mild diluted chemicals and agricultural spray solutions. Good for septic service and transferring light abrasives. Reference Gates Chemical Resistance Table on page 139.

RECOMMENDED FOR:

-30ºF to +140ºF (-34ºC to +60ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type P (EPDM). Black. Reinforcement: Polyethylene helix. Green. Cover: Type G (PVC). Green and Black.

COUPLINGS:

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING:

Unlabeled.

BRANDING: SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

STANDARDS:

Tube: RMA (Class B) Medium oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #8 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 400

Material Handling Hose

(Specification 7744) Part No. 333026 333027 333028 333029 333030 333031 333032 333035

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 4 5 6 8

Nom. O.D. (mm) 38.0 51.0 63.0 76.0 102.0 127.0 152.0 203.0

(ln.) 1.88 2.41 2.98 3.87 4.65 5.77 6.86 9.10

Max. W.P.* (mm) 47.8 61.2 75.7 98.3 118.1 146.6 174.2 231.1

Suction*

(psi) 40 35 35 30 30 30 25 25

(MPa) .28 .24 .24 .21 .21 .21 .17 .17

(ln. Hg.) (mm Hg) 711 28.0 711 28.0 711 28.0 28.0 711 28.0 711 711 28.0 28.0 711 28.0 711

Min. Bend Radius (ln.) 3.0 4.0 5.0 6.0 8.0 9.0 12.0 16.0

Wt. Per Ft. (mm) 76 102 127 142 203 229 305 406

(Lbs.) .40 .54 .77 1.05 1.70 2.40 3.21 5.77

Standard

Stock (X) or Minimum

Gates

List Price

Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft.

Order Qty. X X X X X 1,000 ft X X

Item No. 7744-6102 7744-6103 7744-6104 7744-6105 7744-6106 7744-6107 7744-6108 7744-6209

Per Ft. $6.19 8.90 12.12 15.83 27.14 42.21 48.70 55.61

(Kg) .18 .25 .35 .48 .77 1.09 1.46 2.62

* Working Pressure and Suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION: COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Transfer of bulk materials via suction, pneumatic or gravity systems where abrasion resistance is the primary requirement and a static conductive hose is needed. Can also be used for vacuum or ducting service. -30ºF to +140ºF (-34ºC to +60ºC) continuous service. Tube: SBR/NBR blend with carbon black for static dissipation. Black. Reinforcement: Rigid PVC helix. Black. 1

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Unlabeled. Special production runs require minimum order quantity of 1,000 feet per size. No deviations allowed to above product. None. Tube: RMA (Class B) Medium oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

770SB

Material Handling Hose

(Specification 4691V) Part No. 306100 306101 306102 306104 306107 306108 306110 306112 306113

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 1.39 1.64 1.89 2.39 2.89 3.39 4.39 5.53 6.53

Max. W.P. (psi) 50 50 50 50 50 50 50 50 50

(mm) 35.3 41.7 48.0 60.7 73.4 86.1 111.5 140.5 165.9

(MPa) .34 .34 .34 .34 .34 .34 .34 .34 .34

Suction (ln. Hg) (mm Hg) 508 20.0 508 20.0 508 20.0 508 20.0 508 20.0 508 20.0 508 20.0 508 20.0 20.0 508

Min. Bend Radius (ln.) 5.0 5.0 6.0 8.0 9.0 10.0 15.0 20.0 24.0

(mm) 127 127 152 203 229 254 381 508 610

Wt. Per Ft. (Lbs.) .49 .59 .68 .75 .91 1.19 1.49 2.73 3.24

(Kg) .22 .27 .31 .34 .41 .54 .68 1.24 1.47

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. 400 ft. X X X X X X X X

Gates Item No. 4691-0400 4691-0405 4691-0410 4691-0420 4691-0430 4691-0435 4691-0440 4691-0450 4691-0455

List Price Per Ft. $14.20 14.35 14.66 15.15 16.24 17.90 25.05 38.92 48.14

Light duty vacuum service in industrial and maintenance applications conveying air, dust, fine particles, leaves, grass, etc.

RECOMMENDED FOR:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type D3 (Natural Rubber). Black. Static conductive. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type D (SBR). Black corrugated with gray spiral stripe.

COUPLINGS:

, or

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “

SPECIAL ORDER REQUIREMENTS:

770SB LT WT Vacuum Service Only Made In U.S.A.”

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

19B Plant Master®

Multi-Purpose Hose

(Specification 3219AR)

Part No. 300100 300101 300102 300103 300104 300105 300106 300108 300109 300111 300112 300113 300114 300116 300117 300118 300121 300122 300123 300120 300124

Nom. I.D. (ln.) 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 1 1 1 1/4 1 1/4 1 3/8 1 3/8 1 1/2 1 1/2

(mm) 4.8 6.3 6.3 8.0 8.0 9.5 9.5 12.7 12.7 16.0 16.0 19.0 19.0 25.4 25.4 31.8 31.8 34.9 34.9 38.0 38.0

Nom. O.D. (ln.) .43 .50 .62 .62 .69 .69 .75 .84 .88 .94 1.00 1.09 1.19 1.38 1.50 1.75 1.75 1.87 1.88 2.00 2.00

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS:

(mm) 10.9 12.7 15.7 15.7 17.5 17.5 19.1 21.3 22.4 23.9 25.4 27.7 30.2 35.1 38.1 44.5 44.5 47.5 47.8 50.8 50.8

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(MPa) 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45 1.72 3.45

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 508 20.0 508 20.0 508 20.0 20.0 508 10.0 254 20.0 508 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 5.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 10.0 10.0 10.0 12.0 12.0

(mm) 76 76 76 76 76 76 76 127 127 152 152 152 152 203 203 254 254 254 254 305 305

Wt. Per Ft. (Lbs.) .07 .09 .14 .13 .17 .15 .18 .20 .23 .22 .27 .28 .38 .41 .55 .67 .67 .71 .73 .78 .78

(Kg) .03 .04 .06 .06 .08 .07 .08 .09 .10 .10 .12 .13 .17 .19 .25 .30 .30 .32 .33 .35 .35

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X X X X X X X X X X X X 5,000 ft. 5,000 ft. 5,000 ft. X 2,500 ft.

-40ºF to +212ºF (-40º to +100º C) continuous service. Reference page 7 for additional information. Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type C2 (Modified Nitrile). Red. 19

(up through 1/2"only), 3 or 4 (up through 1" with bands, up through 1/2" with ferrules), (all sizes) or 72 Gates permanent Power Crimp® couplings. Reference page 108-117.

3/16" through 1/2": Packaged in 500' to 750' reels. Maximum 3 pieces. Minimum length 50'. 5/8" through 1": Packaged in 400' to 650' reels. Maximum 3 pieces. Minimum length 50'. 1 1/4" & over: Packaged in 250' to 400' reels. Maximum 3 pieces. Minimum length 50'. Continuous ink brand. Example: “ PSI (1.72MPa) WP Made in U.S.A.”

19B Plant Master® Multi-Purpose 3/8 Inch (9.5mm) 250

Special production runs require minimum order quantities of 10,000 feet for sizes through 3/8", 5,000 feet 1/2" through 1 3/8" and 2,500 feet for 1 1/2". None. Tube: RMA (Class A) High oil resistance. Cover: RMA (Class B) Medium oil resistance. Mil-H-2815G Section 3.12.2 off-gassing for breathing applications such as supplied air respirators, through 1/2" I.D. Nonconductive at 1000 volts D.C. Meets electrical resistance of one megohm per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $2.15 2.43 3.18 2.60 3.53 2.76 3.90 3.86 5.49 4.39 6.54 5.40 7.27 6.59 8.86 15.01 15.65 16.38 17.20 17.76 18.65

Gates Item No. 3219-2901 3219-2902 3219-2903 3219-2904 3219-2905 3219-2906 3219-2907 3219-2908 3219-2909 3219-2910 3219-2911 3219-2912 3219-2913 3219-2914 3219-2915 3219-2916 3219-2917 3219-2918 3219-2919 3219-2920 3219-2921

Applications requiring a premium grade braided hose, with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120ºF) and lubricating oils (to 212ºF). Excellent weather and ozone resistance.

or PACKAGING:

Max. W.P. (psi) 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500 250 500

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

119B Plant Master®

Multi-Purpose Hose

(Specification 3219AB) Part No. 300151 300153 300155 300158 300160 300161 300163 300165 300167

Nom. I.D. (ln.) 1/4 5/16 3/8 1/2 5/8 3/4 1 1 1/4 1 1/2

(mm) 6.3 8.0 9.5 12.7 16.0 19.0 25.4 31.8 38.0

Nom. O.D. (ln.) .50 .62 .69 .84 .94 1.09 1.38 1.75 2.00

Max. W.P. (psi) 250 250 250 250 250 250 250 250 250

(mm) 12.7 15.7 17.5 21.3 23.9 27.7 35.1 44.5 50.8

(MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 25.0 635 20.0 508 20.0 508 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 3.0 5.0 6.0 6.0 8.0 10.0 12.0

(mm) 76 76 76 127 152 152 203 254 305

Wt. Per Ft. (Lbs.) .09 .13 .15 .21 .23 .29 .42 .69 .81

(Kg) .04 .06 .07 .10 .10 .13 .19 .31 .37

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. 10,000 ft. 10,000 ft. 10,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 2,500 ft.

Gates Item No. 3219-2930 3219-2932 3219-2933 3219-2935 3219-2937 3219-2938 3219-2940 3219-2942 3219-2943

List Price Per Ft. $2.32 2.48 2.60 3.62 4.18 5.17 6.22 14.24 16.88

Applications requiring a premium grade braided hose, with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120º F) and lubricating oils (to 212º F). Excellent weather and ozone resistance.

RECOMMENDED FOR:

-40ºF to +212Fº (-40ºC to +100ºC) continuous service. Reference page 7 for additional information.

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type A (Neoprene). Black.

CONSTRUCTION:

COUPLINGS:

19 1

(up through 1/2"only), 3 or 4 (up through 1" with bands, up through 1/2" with ferrules), 14 , 15 (all sizes) or 72 Gates permanent Power Crimp® couplings. Reference pages 108-117. ,

1/4" through 1/2": Packaged in 500' to 750' reels. Maximum 3 pieces. Minimum length 50'. 5/8" through 1": Packaged in 400' to 650' reels. Maximum 3 pieces. Minimum length 50'. 1 1/4" & over: Packaged in 250' to 400' reels. Maximum 3 pieces. Minimum length 50'.

PACKAGING:

BRANDING:

Continuous ink brand. Example: “ (1.72MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

119B Plant Master® Multi-Purpose 3/8 Inch (9.5mm) 250 PSI

Special production runs require minimum order quantities of 10,000 feet for sizes through 3/8", 5,000 feet 1/2" through 1 1/4" and 2,500 feet for 1 1/2". None.

REMNANT LENGTHS:

Tube: RMA (Class A) High oil resistance. Cover: RMA (Class B) Medium oil resistance. Mil-H-2815G Section 3.12.2 off-gassing for breathing applications such as supplied air respirators, through 1/2" I.D Nonconductive at 1000 volts D.C. Meets electrical resistance of one megohm per inch when subjected to 1000 volts D.C Storage and use may adversely affect electrical properties.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Terminator®

Multi-Purpose Hose

(Specification 3202T) Part No. 308500 308501 308502 308503 308504 308505 308506 308507

Nom. I.D. (ln.) 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2

(mm) 6.3 9.5 12.7 19.0 25.4 31.8 38.0 51.0

Nom. O.D. (ln.) .57 .75 .89 1.22 1.51 1.78 2.09 2.64

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS:

(mm) 14.5 19.1 22.6 31.0 38.4 45.2 53.1 67.1

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(MPa) 3.45 3.45 3.45 3.45 3.45 3.45 3.45 3.45

Suction (ln. Hg) (mm Hg) 30.0 762 25.0 635 25.0 635 15.0 381 10.0 254 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 5.0 6.0 8.0 10.0 12.0 14.0

(mm) 76 76 127 152 203 254 305 356

Wt. Per Ft. (Lbs.) .12 .19 .25 .42 .57 .73 .86 1.21

(Kg) .05 .09 .11 .19 .26 .33 .39 .55

Standard Pack REEL REEL REEL REEL REEL REEL 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X

Gates Item No. 3202-0001 3202-0006 3202-0011 3202-0016 3202-0021 3202-0027 3202-0030 3202-0035

-40ºF to +212ºF (-40ºC to +100ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile cord. Cover: Type C4 (Carboxylated Nitrile). Yellow. 19

(up through 1/2"only),

3 ®

Gates permanent Power Crimp or

(up through 1" with bands; up through 1/2" with brass ferrules),

MegaCrimp® coupling. Reference pages 108-117.

1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1" and 1 1/4": Packaged in 350' reels. Maximum 3 pieces. Minimum length 50'. 1 1/2" and 2": Packaged in 50' coiled in a carton. Minimum of 90% of hose reels will be 1-piece lengths. TERMINATOR® 501 PSI (3.45MPa) WP 3/4 Inch (19.0mm) Flame Continuous ink brand. Example “ Resistant, MSHA 2G-IC-11C Made in U.S.A.” Special production runs require minimum order quantities of 25,000 feet per size. None. Tube: RMA (Class A) High oil resistance. Cover: RMA (Class A) High oil resistance. Meets MSHA 30 CFR 18.65. Flame-resistant. Nonconductive at 1000 volts D.C. Meets electrical resistance of one megohm per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $2.39 2.96 4.15 5.56 8.26 11.42 15.96 17.43

Applications requiring a premium-quality, multi-purpose hose with superior abrasion resistance for air, oil and some chemical applications. Excellent durability for extra long life in these applications: mining, air drill, construction, poultry plants and other severe service. Excellent weather and ozone resistance.

PACKAGING:

Max. W.P. (psi) 501 501 501 501 501 501 501 501

The Gates Rubber Company

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices Multi-Purpose Hose

LOL Plus

Lock-On Hose

(Specification 3284D, E, G, H, R, Y) Part No. 305050 305051 305052 305053 305054 305055 305056 305057 305058 305059 305060 305061 305062 305063 305064 305065 305066 305067 305068 305069 305070 305071 305072 305073 305074 305075 305076 305077 305078 305079

Color Black Black Black Black Black Blue Blue Blue Blue Blue Red Red Red Red Red Yellow Yellow Yellow Yellow Yellow Green Green Green Green Green Gray Gray Gray Gray Gray

Nom. I.D. (ln.) 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4 1/4 3/8 1/2 5/8 3/4

Nom. O.D. (ln.) .47 .63 .77 .94 1.06 .47 .63 .77 .94 1.06 .47 .63 .77 .94 1.06 .47 .63 .77 .94 1.06 .47 .63 .77 .94 1.06 .47 .63 .77 .94 1.06

(mm) 6.3 9.5 12.7 16.0 19.0 6.3 9.5 12.7 16.0 19.0 6.3 9.5 12.7 16.0 19.0 6.3 9.5 12.7 16.0 19.0 6.3 9.5 12.7 16.0 19.0 6.3 9.5 12.7 16.0 19.0

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

(mm) 11.9 16.0 19.6 23.9 26.9 11.9 16.0 19.6 23.9 26.9 11.9 16.0 19.6 23.9 26.9 11.9 16.0 19.6 23.9 26.9 11.9 16.0 19.6 23.9 26.9 11.9 16.0 19.6 23.9 26.9

Max. W.P. (psi) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300

(MPa) 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07

Suction (ln. Hg) (mm Hg) 711 28.0 711 28.0 711 28.0 711 28.0 381 15.0 28.0 711 28.0 711 28.0 711 28.0 711 15.0 381 28.0 711 28.0 711 28.0 711 28.0 711 15.0 381 28.0 711 28.0 711 28.0 711 28.0 711 15.0 381 28.0 711 28.0 711 28.0 711 28.0 711 15.0 381 28.0 711 28.0 711 28.0 711 28.0 711 15.0 381

Min. Bend Radius (ln.) 3.0 3.0 5.0 6.0 7.0 3.0 3.0 5.0 6.0 7.0 3.0 3.0 5.0 6.0 7.0 3.0 3.0 5.0 6.0 7.0 3.0 3.0 5.0 6.0 7.0 3.0 3.0 5.0 6.0 7.0

(mm) 76 76 127 152 178 76 76 127 152 178 76 76 127 152 178 76 76 127 152 178 76 76 127 152 178 76 76 127 152 178

Wt. Per Ft. (Lbs.) .09 .11 .15 .20 .24 .09 .11 .15 .20 .24 .09 .11 .15 .20 .24 .09 .11 .15 .20 .24 .09 .11 .15 .20 .24 .09 .11 .15 .20 .24

(Kg) .04 .05 .07 .09 .11 .04 .05 .07 .09 .11 .04 .05 .07 .09 .11 .04 .05 .07 .09 .11 .04 .05 .07 .09 .11 .04 .05 .07 .09 .11

Stock (X) Standard or Minimum Pack Order Qty. REEL X REEL X REEL X REEL X REEL X X REEL X REEL X REEL X REEL X REEL REEL X REEL X REEL X REEL X REEL X REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft. REEL 5,000 ft.

Gates Item No. 3201-1100 3201-1101 3201-1102 3201-1103 3201-1104 3201-1105 3201-1106 3201-1107 3201-1108 3201-1109 3201-1110 3201-1111 3201-1112 3201-1113 3201-1114 3201-1115 3201-1116 3201-1117 3201-1118 3201-1119 3201-1120 3201-1121 3201-1122 3201-1123 3201-1124 3201-1125 3201-1126 3201-1127 3201-1128 3201-1129

Petroleum-base hydraulic oils, water, glycol antifreeze solutions, hot lubricating oils, and air. NOTE: Lock-On hose and couplings are not recommended for pressure surge applications or critical applications, such as permanent piping in residential or commercial buildings. Not recommended for gasoline or diesel fuels. -40ºF to +212ºF (-40ºC to +100ºC) normal service. For temperatures exceeding 160ºF use hose clamps. Tube: Type C (Nitrile). Black. Reinforcement: Aramid tensile cord. Cover: Type C (Modified Nitrile). Black Blue, Red, Yellow, Green or Gray.

COUPLINGS:

Gates Hydraulic Lock-On Couplings (Reference Gates Hydraulic Hose Catalog #35093).

PACKAGING:

1/4" through 1/2": Packaged in 300' reels. Maximum of 3 pieces per reel. Minimum length 50 ft. 5/8": Packaged in 250' reels. Maximum of 3 pieces per reel. Minimum length 50 ft. 3/4": Packaged in 225' reels. Maximum of 3 pieces per reel. Minimum length 50 ft.

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

List Price Per Ft. $1.56 1.96 2.29 3.05 3.81 1.56 1.96 2.29 3.05 3.81 1.56 1.96 2.29 3.05 3.81 1.56 1.96 2.29 3.05 3.81 1.56 1.96 2.29 3.05 3.81 1.56 1.96 2.29 3.05 3.81

LOL PLUS 12LOLA+ 3/4 INCH 300 PSI WP FLAME Continuous ink brand. Example: “ RESISTANT COVER Made in U.S.A.” Special production runs require minimum order quantities of 5,000 feet per size. None. Tube: RMA (Class A) High oil resistance. Cover: RMA (Class A) High oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices Multi-Purpose Hose

Python® Plus

“Silicone Free” Lock-On Hose

(Specification 3222B, G, R, Y, BK, GY) Part No. 305000 305001 305002 305005 305006 305007 305010 305011 305012 305015 305016 305017 305020 305021 305022 305025 305026 305027

Color Black Black Black Blue Blue Blue Red Red Red Yellow Yellow Yellow Green Green Green Gray Gray Gray

Nom. I.D. (ln.) 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2

(mm) 6.3 9.5 12.7 6.3 9.5 12.7 6.3 9.5 12.7 6.3 9.5 12.7 6.3 9.5 12.7 6.3 9.5 12.7

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

Nom. O.D. (ln.) .54 .68 .81 .54 .68 .81 .54 .68 .81 .54 .68 .81 .54 .68 .81 .54 .68 .81

(mm) 13.7 17.3 20.6 13.7 17.3 20.6 13.7 17.3 20.6 13.7 17.3 20.6 13.7 17.3 20.6 13.7 17.3 20.6

Max. W.P. (psi) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300

(MPa)) 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 3.0 3.0 5.0 3.0 3.0 5.0 3.0 3.0 5.0 3.0 3.0 5.0 3.0 3.0 5.0 3.0 3.0 5.0

(mm) 76 76 127 76 76 127 76 76 127 76 76 127 76 76 127 76 76 127

Wt. Per Ft. (Lbs.) .11 .15 .18 .11 .15 .18 .11 .15 .18 .11 .15 .18 .11 .15 .18 .11 .15 .18

(Kg) .05 .07 .08 .05 .07 .08 .05 .07 .08 .05 .07 .08 .05 .07 .08 .05 .07 .08

Stock (X) Standard or Minimum Pack Order Qty. REEL X REEL X REEL X REEL X REEL X REEL X REEL 25,000 ft. REEL X REEL X REEL 25,000 ft. REEL X REEL X REEL 25,000 ft. REEL X REEL X X REEL REEL X REEL X

Gates Item No. 3222-0183 3222-0184 3222-0185 3222-0143 3222-0144 3222-0145 3222-0333 3222-0334 3222-0335 3222-0083 3222-0084 3222-0085 3222-0233 3222-0234 3222-0235 3222-0283 3222-0284 3222-0285

Air, water, oils, antifreeze solutions and applications where Lock-On fittings are used. “Silicone Free” for supplied air in paint applications. NOTE: Lock-On hose is not recommended for applications where vibrations or pressure surges exist. Do not use oil for Lock-On fitting insertion purposes. -20ºF to +212ºF (-29ºC to +100ºC) normal service. For temperatures exceeding 160ºF use hose clamps. Tube: Type C (Nitrile). Black. Reinforcement: Aramid tensile cord. Cover: Type C (Nitrile). Black, Blue, Red, Yellow, Green or Gray.

COUPLINGS:

Gates Hydraulic Lock-On Couplings (Reference Gates Hydraulic Hose Catalog #35093).

PACKAGING:

Packaged in 500' to 700' reels. 90% single piece reels, 50' increments. Maximum of 2 pieces per reel.

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Continuous ink brand. Example: “ Nonconductive Made in U.S.A.”

Python® Plus Lock-On 3/4 Inch (19.0mm) 300 PSI (2.07MPa) WP

Special production runs require minimum order quantities of 25,000 feet per size. None. Tube: RMA (Class A) High oil resistance. Cover: RMA (Class A) High oil resistance. Nonconductive at 1000 volts D.C. Meets electrical resistance of one megohm per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $1.48 1.87 2.18 1.48 1.87 2.18 1.48 1.87 2.18 1.48 1.87 2.18 1.48 1.87 2.18 1.48 1.87 2.18

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Premo Flex®

Multi-Purpose Hose

(Specification 3205R/3205B) Part No. 300251 300252 300253 300254 300255 300256 300257 300258 300259 300260 300261 300262 301258 300263 300264 300265 300266

Nom. I.D. (ln.) 3/16 1/4 1/4 5/16 5/16 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1 1 1/4 1 1/2

(mm) 4.8 6.3 6.3 8.0 8.0 9.5 9.5 12.7 12.7 16.0 16.0 19.0 19.0 19.0 25.4 31.8 38.0

Nom. O.D. (ln.) .44 .50 .57 .56 .67 .66 .73 .85 .88 .98 .98 1.15 1.15 1.19 1.47 1.75 2.00

Max. W.P. (psi) 250 250 315 250 315 250 315 250 315 250 315 250 250 315 250 250 250

(mm) 11.2 12.7 14.5 14.2 17.0 16.8 18.5 21.6 22.4 24.9 24.9 29.2 29.2 30.2 37.3 44.5 50.8

(MPa) 1.72 1.72 2.17 1.72 2.17 1.72 2.17 1.72 2.17 1.72 2.17 1.72 1.72 2.17 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 20.0 508 20.0 508 508 20.0 508 20.0 254 10.0 10.0 254 10.0 254

Min. Bend Radius (ln.) 2.0 2.0 2.0 2.0 2.0 3.0 3.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 8.0 10.0 12.0

(mm) 50 50 50 50 50 76 76 102 102 127 127 127 127 127 203 254 305

Wt. Per Ft. (Lbs.) .07 .09 .12 .10 .16 .14 .18 .22 .24 .27 .27 .36 .36 .40 .54 .67 .78

(Kg) .03 .04 .05 .05 .07 .06 .08 .10 .11 .12 .12 .16 .16 .18 .25 .30 .35

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL 50 ft. REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. 25,000 ft. X X 25,000 ft. 25,000 ft. X X X X 25,000 ft. X X 25,000 ft. X X X X

List Price Per Ft. $1.27 1.44 2.04 1.55 2.45 1.94 2.73 2.59 3.57 3.47 4.17 4.26 4.26 5.14 5.65 9.12 10.93

Gates Item No. 3205-0010 3205-0015 3205-0016 3205-0020 3205-0021 3205-0025 3205-0026 3205-0030 3205-0031 3205-0035 3205-0036 3205-0040 3205-5040 3205-0041 3205-0046 3205-0049 3205-0055

Applications requiring a premium grade spiral hose with excellent flexibility and maximum resistance to air, water, petroleum oils, gasoline, kerosene and fuel oil (to 120ºF) and lubricating oils (to 212ºF). Excellent weather and ozone resistance.

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) continuous service. Reference page 7 for additional information.

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type C2 (Modified Nitrile). Red. (Black cover available on special order).

CONSTRUCTION:

COUPLINGS:

19 8

(up through 1/2" only), 3 , 4 , (up through 1" with bands, up through 1/2" with ferrules), 14 , 15 or 72 Gates permanent Power Crimp® couplings. Reference pages 108-117. ,

3/16" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1": Packaged in 300' to 400' reels. Maximum 2 pieces in 50' increments. 1 1/4": Packaged in 300' reels. Maximum 2 pieces in 50' increments. 1 1/2": Packaged in 250' reels. Maximum 2 pieces in 50' increments. 3/4" x 50': Packaged 200' per carton, each length coiled and tied. Minimum of 90% of hose reels will be 1-piece lengths.

PACKAGING:

BRANDING:

Premo Flex® Multi-Purpose 3/8 Inch (9.5mm) 250 PSI (1.72MPa) WP Continuous ink brand. Example: “ NONCONDUCTIVE @1000V D.C.— (1 MEGOHM/IN.) Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 25,000 feet through 3/4", 20,000 feet for 1", 5,000' for 1 1/4" and 2,500' for 1 1/2". Black, cover is made to order. Special production run requirements apply. Price is 5% less than red cover listed above (x.95). None.

REMNANT LENGTHS:

Tube: RMA (Class A) High oil resistance. Cover: RMA (Class B) Medium oil resistance. Mil-H-2815G Section 3.12.2 off-gassing for breathing applications such as supplied air respirators, 3/16" through 3/8", 3/4" and 1" I.D’s. Nonconductive at 1000 volts D.C. Meets electrical resistance of one megohm per inch when subjected to 1000 volts D.C. Storage and use may adversely affect electrical properties.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

6B Dura Master®

Multi-Purpose Hose

(Specification 3206) Part No. 300352 300353 300355 300357 300358 300360 300361 300364 300365 300370 300372 300373 300375

Nom. I.D. (ln.) 1/4 1/4 5/16 3/8 3/8 1/2 1/2 3/4 3/4 1 1 1 1/4 1 1/2

(mm) 6.3 6.3 8.0 9.5 9.5 12.7 12.7 19.0 19.0 25.4 25.4 31.8 38.0

Nom. O.D. (ln.) .50 .62 .62 .69 .75 .84 .88 1.09 1.19 1.35 1.50 1.73 1.98

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(mm) 12.7 15.7 15.7 17.5 19.1 21.3 22.4 27.7 30.2 34.3 38.1 43.9 50.3

Max. W.P. (psi) 250 315 250 250 315 250 315 250 315 200 315 200 200

(MPa) 1.72 2.17 1.72 1.72 2.17 1.72 2.17 1.72 2.17 1.38 2.17 1.38 1.38

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 20.0 508 10.0 254 20.0 508 10.0 254 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 3.0 3.0 3.0 5.0 5.0 6.0 6.0 8.0 8.0 10.0 12.0

(mm) 76 76 76 76 76 127 127 152 152 203 203 254 305

Wt. Per Ft. (Lbs.) .09 .15 .14 .16 .20 .21 .25 .29 .40 .39 .59 .67 .79

(Kg) .04 .07 .06 .07 .09 .10 .11 .13 .18 .18 .27 .30 .36

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X X X X X X 5,000 ft. X X

Gates Item No. 3206-0202 3206-0265 3206-0204 3206-0270 3206-0280 3206-0208 3206-0244 3206-0212 3206-0245 3206-0213 3206-0246 3206-0215 3206-0216

Applications requiring a heavy duty braided hose with good resistance to air, water, heat and high viscosity oils. -40ºF to +200ºF (-40ºC to +93ºC) continuous service. Reference page 7 for additional information. Tube: Type B (Specially compounded elastomer). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type B2 (Specially compounded elastomer).Red. All sizes through 1/2" are perforated. 19

(up through 1/2"), 1 , 3 or 4 (up through 1" with bands, up through 1/2" with ferrules) or Gates permanent Power Crimp® couplings. Reference pages 108-117. 1/4" through 1/2": Packaged in 500' to 750' reels. Maximum 3 pieces. Minimum length 50'. 3/4" and 1": Packaged in 400' to 650' reels. Maximum 3 pieces. Minimum length 50'. 1 1/4" & over: Packaged in 250' to 400' reels. Maximum 3 pieces. Minimum length 50'. Continuous ink brand. Example: “ (1.72MPa) WP Made In U.S.A.”

6B Dura Master® Multi-Purpose 3/8 Inch (9.5mm) 250 PSI

Special production runs require minimum order quantities of 10,000 feet for sizes through 3/8", 5,000 feet 1/2" through 1 1/4" and 2,500 feet for 1 1/2". None. Tube: RMA (Class B) Medium oil resistance. Cover: RMA (Class C) Limited oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $1.88 2.13 2.13 2.45 2.73 3.15 3.50 4.63 5.00 5.23 7.78 9.70 11.60

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Duro Flex®

Multi-Purpose Hose

(Specification 3200R/3200B) Part No. 300452 300453 300456 300457 300458 300459 300460 300461 300462 301358 300463 300464 300465 300470

Nom. I.D. (ln.) 1/4 1/4 3/8 3/8 1/2 1/2 5/8 5/8 3/4 3/4 3/4 1 1 1/4 1 1/2

(mm) 6.3 6.3 9.5 9.5 12.7 12.7 16.0 16.0 19.0 19.0 19.0 25.4 31.8 38.0

Nom. O.D. (ln.) .47 .57 .66 .73 .81 .88 .98 .98 1.15 1.15 1.15 1.47 1.73 1.98

(mm) 11.9 14.5 16.8 18.5 20.6 22.4 24.9 24.9 29.2 29.2 29.2 37.3 43.9 50.3

Max. W.P. (psi) 250 300 250 300 250 300 250 300 250 250 300 250 250 250

(MPa) 1.72 2.07 1.72 2.07 1.72 2.07 1.72 2.07 1.72 1.72 2.07 1.72 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 20.0 508 20.0 508 20.0 508 20.0 508 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 2.0 2.0 3.0 3.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 8.0 10.0 12.0

(mm) 50 50 76 76 102 102 127 127 127 127 127 203 254 305

Wt. Per Ft. (Lbs.) .07 .12 .14 .18 .19 .25 .27 .27 .36 .36 .36 .54 .67 .79

(Kg) .03 .05 .06 .08 .09 .11 .12 .12 .16 .16 .16 .25 .30 .36

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL 50 ft. REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X X 25,000 ft. X X 25,000 ft. X X X X

List Price Per Ft. $1.23 1.33 1.56 1.73 1.85 2.35 2.57 3.01 2.66 2.66 3.22 3.91 7.72 8.05

Gates Item No. 3200-0002 3200-0003 3200-0006 3200-0007 3200-0008 3200-0009 3200-0010 3200-0011 3200-0012 3200-5012 3200-0013 3200-0014 3200-0015 3200-0016

Applications requiring maximum flexibility and good resistance to air, water and heat.

RECOMMENDED FOR:

-40ºF to +200ºF (-40ºC to +93ºC) continuous service. Reference page 7 for additional information.

TEMPERATURE:

Tube: Type B (Specially compounded elastomer). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type B2 (Specially compounded elastomer).Red. All sizes through 1/2" have perforated cover. (Black, cover available on special order).

CONSTRUCTION:

COUPLINGS:

(up through 1/2"), 1 , 3 or 4 (up through 1" with bands, up through 1/2" with ferrules) or Gates permanent Power Crimp® couplings. Reference pages 108-117.

PACKAGING:

1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1": Packaged in 300' to 400' reels. Maximum 2 pieces in 50' increments. 1 1/4": Packaged in 300' reels. Maximum 2 pieces in 50' increments. 1 1/2": Packaged in 250' reels. Maximum 2 pieces in 50' increments. 3/4" x 50': Packaged 200' per carton, each length coiled and tied. Minimum of 90% of hose reels will be 1-piece lengths.

BRANDING:

Continuous ink brand. Example: “ Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Duro Flex® Multi-Purpose 3/8 Inch (9.5mm) 250 PSI (1.72MPa) WP

REMNANT LENGTHS:

Tube: RMA (Class B) Medium oil resistance.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Adapta Flex

Multi-Purpose Hose Red Cover Part No. 310600 310601 310602 310603 310604 310605 310606 310607 310608 310609 310610 310611 310612 310613 310614 310615 310616 310617 310618 310619 310620 310621

Nom. I.D. (ln.) 1/4 1/4 1/4 1/4 5/16 3/8 3/8 3/8 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 1 1 1

(Specification 3204E/S)

(mm) 6.3 6.3 6.3 6.3 8.0 9.5 9.5 9.5 12.7 12.7 12.7 16.0 16.0 16.0 19.0 19.0 19.0 19.0 19.0 25.4 25.4 25.4

Nom. O.D. (ln.) .47 .47 .62 .49 .53 .66 .66 .67 .81 .81 .81 .93 .93 .93 1.08 1.13 1.13 1.13 1.13 1.39 1.39 1.47

Max. W.P. (psi) 200 250 250 300 200 200 250 300 200 250 300 200 250 250 200 250 250 300 300 150 200 300

(mm) 11.9 11.9 15.7 12.4 13.5 16.8 16.8 17.0 20.6 20.6 20.6 23.6 23.6 23.6 27.4 28.7 28.7 28.7 28.7 35.3 35.3 37.3

(MPa) 1.38 1.72 1.72 2.07 1.38 1.38 1.72 2.07 1.38 1.72 2.07 1.38 1.72 1.72 1.38 1.72 1.72 2.07 2.07 1.03 1.38 2.07

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 25.0 635 20.0 508 508 20.0 508 20.0 381 15.0 20.0 508 20.0 508 15.0 381 15.0 381 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0

(mm) 76 76 76 76 76 76 76 76 127 127 127 152 152 152 152 152 152 152 152 203 203 203

Wt. Per Ft. (Lbs.) .08 .08 .16 .09 .09 .14 .14 .15 .20 .20 .20 .24 .24 .24 .30 .35 .35 .35 .35 .46 .46 .57

(Kg) .04 .04 .07 .04 .04 .06 .06 .07 .09 .09 .09 .11 .11 .11 .14 .16 .16 .16 .16 .21 .21 .26

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL 50 ft. REEL REEL 50 ft. REEL 50 ft. REEL REEL REEL

Stock (X) or Minimum Order Qty. X X 25,000 ft. X X X X X X X X X X 25,000 ft. X X 25,000 ft. X 25,000 ft. X X X

Gates Item No. 3204-1301 3204-1304 3204-1386 3204-1307 3204-1316 3204-1319 3204-1322 3204-1325 3204-1328 3204-1331 3204-1334 3204-1337 3204-1340 3204-5415 3204-1346 3204-1349 3204-5420 3204-1355 3204-5675 3204-1358 3204-1361 3204-1364

List Price Per Ft. $.73 .97 1.51 1.02 .94 1.01 1.20 1.25 1.20 1.44 1.51 1.54 1.70 1.70 1.79 2.04 2.04 2.15 2.15 3.05 3.15 3.64

NOTE: For 1 1/4" and 1 1/2" I.D. see Duro Flex page 47. 19

Coupled with Standard Air Hose fittings Male/Male with 1/4" threads.

Part No. 310681

Nom. I.D. (ln.) 3/8

(mm) 9.5

Nom. O.D. (ln.) .66

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS:

(mm) 16.8

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(MPa) 1.72

Suction (ln. Hg) (mm Hg) 30.0 762

Min. Bend Radius (ln.) 3.0

(mm) 76

Wt. Per Ea. (Lbs.) 7.72

(Kg) 3.50

Standard Pack 50 ft.

Stock (X) or Minimum Order Qty. 5 EA (X)

Gates Item No. 3204-1720

-40ºF to +200ºF (-40ºC to +93ºC) continuous service. Reference page 7 for additional information. Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type P (EPDM). Red. All sizes through 1/2" are perforated. 19

(up through 1/2"),

(up through 1" with bands, up through 1/2" with brass ferrules) or

Gates permanent Power Crimp couplings. Reference pages 108-117.

3/8" x 50' coupled assemblies: Coiled in a carton, 5 assemblies per carton. 1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1": Packaged in 300' to 400' reels. Maximum 2 pieces in 50' increments. 5/8" x 50': Packaged 250' per carton, each length coiled and tied. 3/4" x 50': Packaged 200' per carton, each length coiled and tied. Minimum of 90% of hose reels will be 1-piece lengths. Continuous ink brand. Example: “ WP Made In U.S.A.”

Adapta Flex Multi-Purpose 3/8 Inch (9.5mm) 250 PSI (1.72MPa)

Special production runs require minimum order quantities of 25,000 feet per size. None. Tube: RMA (Class C) Limited oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ea. $75.59

Air and water applications requiring maximum flexibility. Outstanding resistance to heat and ozone.

PACKAGING:

Max. W.P. (psi) 250

Adapta Flex Assemblies

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Multi-Purpose Hose

Adapta Flex

UPS Shippable Reels

Red Cover Part No. 310675 310676 310677 310678 310679 310680

Nom. I.D. (ln.) 1/4 3/8 1/2 5/8 3/4 1

(Specification 3204E)

(mm) 6.3 9.5 12.7 16.0 19.0 25.4

Nom. O.D. (ln.) .47 .66 .81 .93 1.08 1.39

Max. W.P. (psi) 200 200 200 200 200 200

(mm) 11.9 16.8 20.6 23.6 27.4 35.3

(MPa)) 1.38 1.38 1.38 1.38 1.38 1.38

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 25.0 635 20.0 508 15.0 381 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 5.0 6.0 6.0 8.0

(mm) 76 76 127 152 152 203

Wt. Per Ft. (Lbs.) .08 .14 .20 .24 .30 .46

(Kg) .04 .06 .09 .11 .14 .21

Standard Pack REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X X

Gates Item No. 3204-1373 3204-1375 3204-1377 3204-1379 3204-1381 3204-1383

List Price Per Ft. $.73 1.01 1.20 1.54 1.79 3.15

Air and water applications requiring maximum flexibility. Outstanding resistance to heat and ozone.

RECOMMENDED FOR:

-40ºF to +200ºF (-40ºC to +93ºC) continuous service. Reference page 7 for additional information.

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type P (EPDM). Red. All sizes through 1/2" are perforated. (Blue, green and yellow covers available on special order).

CONSTRUCTION:

COUPLINGS

19 72

(up through 1/2"),

(up through 1" with bands, up through 1/2" with brass ferrules) or

Gates permanent Power Crimp couplings. Reference pages 108-117.

All sizes packaged on single piece reels which meet UPS (United Parcel Service) size and weight requirements. 1/4" and 3/8": Packaged in 375' to 425' single piece reels. 1/2": Packaged in 225' to 275' single piece reels. 5/8": Packaged in 235' to 265' single piece reels. 3/4": Packaged in 185' to 215' single piece reels. 1": Packaged in 100' to 125' single piece reels.

PACKAGING:

BRANDING:

Continuous ink brand. Example: “ WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Adapta Flex Multi-Purpose 3/8 Inch (9.5mm) 200 PSI (1.38MPa)

Special production runs require minimum order quantities of 25,000 feet per size. Black, blue, green and yellow covers are made to order and require 25,000 ft. orders by size/color. Prices for colors as follows from list prices above: Black less 5% (X.95). Blue, green and yellow contact Denver Industrial Hose Marketing for pricing, order requirements and availability. None.

REMNANT LENGTHS:

Tube: RMA (Class C) Limited oil resistance. Reels meet size and weight requirements of UPS (United Parcel Service).

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Multi-Purpose Hose

Adapta Flex

Black Cover

(Specification 3204EB/SB)

Part No. 310650 310651 310652 310653 310654 310655 310656 310657 310658 310659 310660 310661 310662 310663 310664 19

Nom. I.D. (ln.) 1/4 1/4 1/4 3/8 3/8 1/2 1/2 5/8 3/4 3/4 3/4 1 1 1 1/4 1 1/2

(mm) 6.3 6.3 6.3 9.5 9.5 12.7 12.7 16.0 19.0 19.0 19.0 25.4 25.4 31.8 38.0

Nom. O.D. (ln.) .47 .47 .62 .66 .66 .81 .81 .93 1.08 1.13 1.13 1.39 1.39 1.73 1.98

Max. W.P. (psi) 200 250 250 200 250 200 250 200 200 250 250 150 200 250 250

(mm) 11.9 11.9 15.7 16.8 16.8 20.6 20.6 23.6 27.4 28.7 28.7 35.3 35.3 43.9 50.3

(MPa) 1.38 1.72 1.72 1.38 1.72 1.38 1.72 1.38 1.38 1.72 1.72 1.03 1.38 1.72 1.72

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 15.0 381 20.0 508 20.0 508 10.0 254 254 10.0 254 10.0 254 10.0

Min. Bend Radius (ln.) 3.0 3.0 3.0 3.0 3.0 5.0 5.0 6.0 6.0 6.0 6.0 8.0 8.0 10.0 12.0

(mm) 76 76 76 76 76 127 127 152 152 152 152 203 203 254 305

Coupled with Standard Air Hose fittings Male/Male with 1/4" threads.

Part No. 310682

Nom. I.D. (ln.) 3/8

(mm) 9.5

Nom. O.D. (ln.) .66

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS:

(mm) 16.8

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(MPa) 1.72

Suction (ln. Hg) (mm Hg) 30.0 762

Min. Bend Radius (ln.) 3.0

(mm) 76

(Kg) .04 .04 .07 .06 .06 .09 .09 .10 .13 .15 .15 .20 .20 .31 .36

Standard Pack REEL REEL REEL REEL REEL REEL REEL REEL REEL REEL 50 ft. REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X 25,000 ft. 25,000 ft. X 25,000 ft. X 25,000 ft. X X X 25,000 ft. 25,000 ft. X X X

Gates Item No. 3204-1401 3204-1404 3204-1406 3204-1407 3204-1410 3204-1413 3204-1416 3204-1419 3204-1422 3204-1425 3204-5820 3204-1428 3204-1431 3204-1434 3204-1437

Adapta Flex Assemblies Wt. Per Ea. (Lbs.) 7.43

(Kg) 3.37

Standard Pack 50 ft.

Stock (X) or Minimum Order Qty. 5 EA (X)

Gates Item No. 3204-1721

List Price Per Ea. $74.61

(up through 1/2"),

(up through 1" with bands, up through 1/2" with brass ferrules) or

Gates permanent Power Crimp couplings. Reference pages 108-117.

3/8" x 50' coupled assemblies: Coiled in a carton, 5 assemblies per carton. 1/4" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 1": Packaged in 300' to 400' reels. Maximum 2 pieces in 50' increments. 1 1/4": Packaged in 300' reels. Maximum 2 pieces in 50' increments. 1 1/2": Packaged in 250' reels. Maximum 2 pieces in 50' increments. 3/4" x 50: Packaged 200' per carton, each length coiled and tied. Minimum of 90% of hose reels will be 1-piece lengths. Continuous ink brand. Example: “ WP Made In U.S.A.”

Adapta Flex Multi-Purpose 3/8 Inch (9.5mm) 250 PSI (1.72MPa)

Special production runs require minimum order quantities of 25,000 feet per size. None. Tube: RMA (Class C) Limited oil resistance. Cover: RMA (Class C) Limited oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $.70 .96 1.51 1.00 1.18 1.19 1.38 1.43 1.67 1.89 1.89 2.80 3.01 4.29 5.36

Air and water applications requiring maximum flexibility. Outstanding resistance to heat and ozone.

PACKAGING:

Max. W.P. (psi) 250

Wt. Per Ft. (Lbs.) .08 .08 .15 .14 .14 .19 .19 .23 .29 .34 .34 .44 .44 .68 .79

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Adapta Flex

Multi-Purpose Hose Blue, Green & Yellow Cover Part No. 310703 310704 310705 310700 310706 310707 310708 310701 310709 310710 310711 310702

Color Blue Blue Blue Blue Green Green Green Green Yellow Yellow Yellow Yellow

Nom. I.D. (ln.) 3/8 1/2 3/4 3/4 3/8 1/2 3/4 3/4 3/8 1/2 3/4 3/4

Nom. O.D. (ln.) .67 .81 1.13 1.13 .67 .81 1.13 1.13 .67 .81 1.13 1.13

(mm) 9.5 12.7 19.0 19.0 9.5 12.7 19.0 19.0 9.5 12.7 19.0 19.0

(Specification 3204BL, GR, YL)

(mm) 17.0 20.6 28.7 28.7 17.0 20.6 28.7 28.7 17.0 20.6 28.7 28.7

Max. W.P. (psi) 300 300 300 300 300 300 300 300 300 300 300 300

Suction (ln. Hg) (mm Hg) 30.0 762 25.0 635 15.0 381 15.0 381 30.0 762 25.0 635 15.0 381 15.0 381 30.0 762 25.0 635 15.0 381 15.0 381

(MPa) 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07 2.07

Min. Bend Radius (ln.) 3.0 5.0 6.0 6.0 3.0 5.0 6.0 6.0 3.0 5.0 6.0 6.0

(mm) 76 127 152 152 76 127 152 152 76 127 152 152

Wt. Per Ft. (Lbs.) .15 .19 .34 .34 .15 .19 .34 .34 .15 .20 .34 .34

(Kg) .07 .09 .15 .15 .07 .09 .15 .15 .07 .09 .15 .15

Standard Pack REEL REEL REEL 50 ft. REEL REEL REEL 50 ft. REEL REEL REEL 50 ft.

Stock (X) or Minimum Order Qty. 25,000 ft. 25,000 ft. 25,000 ft. 900 ft. (X) 25,000 ft. 25,000 ft. 25,000 ft. 900 ft. (X) 25,000 ft. 25,000 ft. 25,000 ft. 900 ft. (X)

Gates Item No. 3204-1501 3204-1503 3204-1505 3204-0560 3204-1511 3204-1513 3204-1515 3204-0506 3204-1521 3204-1523 3204-1525 3204-0558

List Price Per Ft. $1.53 1.88 2.87 2.87 1.53 1.88 2.44 2.44 1.53 1.88 2.44 2.44

Air and water applications requiring maximum flexibility. Outstanding resistance to heat and ozone.

RECOMMENDED FOR:

-40ºF to +200ºF (-40ºC to +93ºC) continuous service. Reference page 7 for additional information.

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type P (EPDM). Blue, Green or Yellow. All sizes through 1/2" are perforated.

CONSTRUCTION:

COUPLINGS:

(up through 1/2"), 4

(up through 1" with bands, up through 1/2" with brass ferrules) ®

Gates permanent Power Crimp couplings. Reference pages 108-117.

3/8" through 3/4": Packaged in 500' to 700' reels. Maximum 2 pieces in 50' increments. 3/4" x 50': Packaged 900' per carton, each length coiled and tied. Minimum of 90% of hose reels will be 1-piece lengths.

PACKAGING:

BRANDING:

Continuous ink brand. Example: “ WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Adapta Flex Multi-Purpose 3/8 Inch(9.5mm) 300 PSI (2.07MPa)

Special production runs require minimum order quantities of 25,000 feet per size. None.

REMNANT LENGTHS:

Tube: RMA (Class C) Limited oil resistance.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Tufflex® GP

Multi-Purpose Hose

(Specification 7746) Part No. 305701 305702 305703 305704 305705 305706

Nom. I.D. (ln.) 1/4 3/8 1/2 5/8 3/4 1

(mm) 6.3 9.5 12.7 16.0 19.0 25.4

Nom. O.D. (ln.) .47 .62 .77 .93 1.07 1.37

(mm) 11.9 15.7 19.6 23.6 27.2 34.8

Max. W.P. * (psi) 300 300 300 300 300 300

(MPa) 2.07 2.07 2.07 2.07 2.07 2.07

Suction (ln. Hg) (mm Hg) 25.0 635 25.0 635 25.0 635 20.0 508 15.0 381 15.0 381

Min. Bend Radius (ln.) 0.6 1.0 1.3 2.5 2.5 3.5

(mm) 15 25 33 64 64 89

Wt. Per Ft. (Lbs.) .06 .10 .15 .21 .25 .31

(Kg) .03 .05 .07 .10 .11 .14

Standard Pack REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X X

Gates Item No. 7746-1001 7746-1002 7746-1003 7746-1004 7746-1005 7746-1006

List Price Per Ft. $.66 .91 1.27 1.62 2.16 3.10

* 300 psi (2.07MPa) at +70ºF (+21ºC), 250 psi (1.72Mpa) at +150ºF (+66ºC).

RECOMMENDED FOR:

Multi-Purpose applications including air, water (up to 150ºF), mild chemicals and spray solutions at rated working pressures as listed. Suitable for in-line oiler service. Silicone free. For chemical resistance, reference Gates Chemical Resistance Table on page 139.

TEMPERATURE:

-15ºF to +150ºF (-26ºC to +66ºC) continuous service.

CONSTRUCTION:

Tube: Type G (PVC). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type G (PVC). Red. All sizes are perforated.

PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

1/4", 1/2", 5/8" and 3/4": Packaged on 600' reels. 3/8": Packaged on 500' reels. 1": Packaged on 350' reels. 90% single piece reels, maximum of 3 pieces, no lengths shorter than 10'. Continuous ink brand. Example: “ Made In U.S.A.”

Tufflex® GP Multi-Purpose 3/8 Inch (9.5mm) 300 PSI (2.07MPa) WP

Special production runs require minimum order quantities of 25,000 feet None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002

Industrial Hose Products/List Prices

New

1000 MP/Mine Spray

Multi-Purpose Hose

(Specification 3619M) Part No. 300951 300952 300965 300953 300954 300963 300966 300955 300967 300968 300957 300969 300970 300959 300971 300972 300961 300973

Nom. I.D. (ln.) 1/2 1/2 1/2 3/4 3/4 3/4 3/4 1 1 1 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 2 2

(mm) 12.7 12.7 12.7 19.0 19.0 19.0 19.0 25.4 25.4 25.4 31.8 31.8 31.8 38.0 38.0 38.0 51.0 51.0

Nom. O.D. (ln.) .84 .84 .84 1.10 1.10 1.10 1.10 1.42 1.42 1.42 1.69 1.69 1.69 1.92 1.92 1.92 2.44 2.44

Max. W.P. (psi) 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

(mm) 21.3 21.3 21.3 27.9 27.9 27.9 27.9 36.1 36.1 36.1 42.9 42.9 42.9 48.8 48.8 48.8 62.1 62.1

(MPa) 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 20.0 508 20.0 508 508 20.0 381 15.0 381 15.0 15.0 381 10.0 254 10.0 254

Min. Bend Radius (ln.) 5.0 5.0 5.0 8.0 8.0 8.0 8.0 11.0 11.0 11.0 16.0 16.0 16.0 18.0 18.0 18.0 25.0 25.0

(mm) 127 127 127 203 203 203 203 279 279 279 406 406 406 457 457 457 635 635

Wt. Per Ft. (Lbs.) .29 .29 .29 .43 .43 .43 .43 .66 .66 .66 .81 .81 .81 .98 .98 .98 1.36 1.36

(Kg) .13 .13 .13 .20 .20 .20 .20 .30 .30 .30 .37 .37 .37 .45 .45 .45 .62 .62

Standard Pack 50 ft. 100 ft. Carton 50 ft. 100 ft. REEL Carton 50 ft. 100 ft. Carton 50 ft. 100 ft. Carton 50 ft. 100 ft. Carton 50 ft Carton

Stock (X) or Minimum Order Qty. X X 1,200 ft. (X) X X X 1,000 ft. (X) X X 700 ft. (X) X X 600 ft. (X) X X 400 ft. (X) X 200 ft. (X)

Gates Item No. 3619-0699 3619-0716 3619-0761 3619-0700 3619-0721 3619-0722 3619-0762 3619-0701 3619-0786 3619-0763 3619-0702 3619-0787 3619-0764 3619-0708 3619-0788 3619-0765 3619-0760 3619-0766

List Price Per Ft. $5.21 5.21 4.96 5.84 5.84 5.56 5.56 6.96 6.96 6.63 10.11 10.11 9.63 15.44 15.44 14.70 18.24 17.37

High pressure water service in underground mining applications and hot water washdown service. Air service working pressure is 300 psi for all sizes.

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) service range.

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type C4 (Modified Nitrile). Yellow (nonmarking). 3/4" through 2" sizes have wrapped cover. All sizes are perforated.

CONSTRUCTION:

COUPLINGS:

Gates permanent Power Crimp® couplings. Reference pages 108-117.

50 ft. and 100 ft. lengths: Coiled in a carton. 3/4": Packaged in 300' reels. Maximum 3 pieces. Minimum length 50'. 1/2" x 50': Packaged 1200' per carton, each length coiled and tied. 3/4" x 50': Packaged 1000' per carton, each length coiled and tied. 1" x 50': Packaged 700' per carton, each length coiled and tied. 1 1/4" x 50': Packaged 600' per carton, each length coiled and tied. 1 1/2" x 50': Packaged 400' per carton, each length coiled and tied. 2" x 50': Packaged 200' per carton, each length coiled and tied.

PACKAGING:

BRANDING:

Continuous transfer label. Example: “ MSHA IC-11C Made In India”

SPECIAL ORDER REQUIREMENTS:

1000 MP/Mine Spray 3/4 Inch (19.0mm) 1000 PSI (6.90MPa) WP

Special production runs require minimum order quantities of 5,000 feet for 1/2" cut lengths and 3/4" reels, 3,000 feet for 3/4" through 1 1/2" cut lengths and 2,500 feet for 2”. None.

REMNANT LENGTHS:

Cover: MSHA IC-11C, Flame resistant.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

3619MC Longwall Mine

Multi-Purpose Hose

(Specification 3619MC) Part No. 300870 300871 300872

Nom. I.D. (ln.) 2 1/2 2 1/2 3

(mm) 63.5 63.5 76.2

Nom. O.D. (ln.) 3.34 3.34 3.91

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Max. W.P. (psi) 1000 1000 1000

(mm) 84.8 84.8 99.3

(MPa) 6.90 6.90 6.90

Suction (ln. Hg) (mm Hg) 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 20.0 20.0 20.0

(mm) 508 508 508

Wt. Per Ft. (Lbs.) 2.90 2.90 4.05

(Kg) 1.32 1.32 1.84

Standard Pack 50 ft. 100 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 3619-0809 3619-0811 3619-0810

Flexible connections in high pressure water distribution and emulsion systems used in a variety of industries. 3619MC’s thick cover meets MSHA’s self-extinguishing requirements, and is designed for the rough mining environment. -40ºF to +212ºF (-40ºC to +100ºC) normal service. Tube: Type A (Neoprene). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type B2 (Specially Compounded Elastomer). Black. Self-extinguishing to meet MSHA requirements. 14

or reusable male couplings (Wildman). Reference pages 108-117.

All lengths coiled in a carton. Continuous ink brand. Example: “ 3619MC Emulsion Return 3 Inch (76.2mm) 1000 PSI (6.90MPa) W.P. USMSHA 2G-IC-11C Made In India” Special production runs require minimum order quantities of 500 feet per size. None. Cover: Flame-Resistant, USMSHA 2G-IC-11C.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $28.91 31.80 38.48

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

319MB Gold Master®

Multi-Purpose Hose

(Specification 3619/3619G) Part No. 301026 301027 301028 301029 301031 301032 301033 301034

Nom. I.D. (ln.) 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2

(mm) 6.3 9.5 12.7 19.0 25.4 31.8 38.0 51.0

Nom. O.D. (ln.) .63 .77 .92 1.21 1.46 1.69 1.94 2.46

Max. W.P. (psi) 1000 1000 1000 1000 1000 1000 1000 1000

(mm) 16.0 19.6 23.4 30.7 37.1 43.3 49.3 62.5

(MPa) 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90

Suction (ln. Hg) (mm Hg) 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 15.0 381 10.0 254

Min. Bend Radius (ln.) 3.0 3.0 5.0 8.0 11.0 16.0 18.0 25.0

Wt. Per Ft. (Lbs.) .22 .31 .42 .60 .77 .87 1.06 1.48

(mm) 76 76 127 203 279 406 457 635

(Kg) .10 .14 .19 .27 .35 .40 .48 .67

Standard Pack REEL REEL REEL REEL 50 ft. 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. 5,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 5,000 ft. 600 ft. 600 ft.

List Price Per Ft. $5.86 6.52 7.54 10.49 14.47 18.90 25.31 29.55

Gates Item No. 3619-0200 3619-0210 3619-0220 3619-0230 3619-0239 3619-0600 3619-0620 3619-0630

High pressure air, water and oil applications requiring good kink resistance and excellent flexibility. Also washdown service to 212ºF (100ºC) in packing plants where a nonmarking cover is required. Additionally, it can convey maximum 100 psi steam at 338ºF (170ºC).

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) air service.

TEMPERATURE:

Tube: Type A (Neoprene). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type M (Hypalon). Gold (non-marking). All sizes are perforated.

CONSTRUCTION:

COUPLINGS:

Gates permanent Power Crimp® couplings.

only. Reference pages 108-117.

(up to 300 PSI only). For steam

1/4" through 3/4": Packaged in 200' to 300' reels. Maximum of 3 pieces. Minimum length 25'. One length under 100'. 1" through 2": Packaged 50' coiled in a carton.

PACKAGING:

BRANDING:

Continuous ink brand. Example: “ (6.90MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

319MB Gold Master® Multi-Purpose 3/8 Inch (9.5mm) 1000 PSI

Special production runs require minimum order quantities of 5,000 feet for sizes less than 1 1/2" and 600 feet for 1 1/2" and larger. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

500 MP/Air Drill (Wire Braid)

Multi-Purpose Hose

(Specification 3618/3618Y) Black Cover (3618) Part No. 301230 301231 301232 301233 301234 301235 301236

Nom. I.D. (ln.) 3/4

1 1 1/4 1 1/2 2 2 1/2 3

(mm) 19.0 25.4 31.8 38.0 51.0 63.0 76.0

Nom. O.D. (ln.) 1.11 1.44 1.74 1.99 2.50 3.14 3.67

Max. W.P. (psi) 500 500 500 500 500 500 500

(mm) 28.2 36.6 44.2 50.6 63.5 79.8 93.2

(MPa) 3.45 3.45 3.45 3.45 3.45 3.45 3.45

Suction (ln. Hg) (mm Hg) 25.0 635 25.0 635 15.0 381 15.0 381 15.0 381 10.0 254 10.0 254

Min. Bend Radius (ln.) 6.0 8.0 10.0 12.0 14.0 30.0 36.0

(MPa) 3.45 3.45 3.45 3.45 3.45 3.45 3.45

Suction (ln. Hg) (mm Hg) 25.0 635 25.0 635 15.0 381 15.0 381 15.0 381 10.0 254 10.0 254

Min. Bend Radius (ln.) 6.0 8.0 10.0 12.0 14.0 30.0 36.0

(mm) 152 203 254 305 356 762 914

Wt. Per Ft. (Lbs.) .41 .66 .86 .98 1.40 2.16 2.73

(mm) 152 203 254 305 356 762 914

Wt. Per Ft. (Lbs.) .41 .65 .85 .96 1.43 2.19 2.78

(Kg) .19 .30 .39 .44 .64 .98 1.24

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 3618-0801 3618-0802 3618-0803 3618-0804 3618-0805 3618-0806 3618-0807

List Price Per Ft. $8.98 10.43 12.95 16.93 24.00 29.21 35.39

(Kg) .19 .30 .39 .44 .65 .99 1.26

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 3618-0808 3618-0809 3618-0810 3618-0811 3618-0812 3618-0813 3618-0814

List Price Per Ft. $9.57 11.13 13.83 18.05 25.59 31.17 37.73

NOTE: For 4" I.D. see 18MB page 17.

Yellow Cover (3618Y) Part No. 301237 301238 301239 301240 301241 301242 301243

Nom. I.D. (ln.) 3/4

1 1 1/4 1 1/2 2 2 1/2 3

(mm) 19.0 25.4 31.8 38.0 51.0 63.0 76.0

Nom. O.D. (ln.) 1.11 1.44 1.74 1.99 2.50 3.14 3.67

Max. W.P. (psi) 500 500 500 500 500 500 500

(mm) 28.2 36.6 44.2 50.6 63.5 79.8 93.2

NOTE: For 4" I.D. see 18MB page 17.

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING:

SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Heavy duty, high pressure use on industrial, construction and pneumatic mining applications requiring wire braided hose with an oil resistant tube and abrasion resistant cover. -22ºF to +180ºF (-30ºC to +82ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type D3 (Natural Rubber). Black with yellow spiral stripe. Type C4 (Modified Nitrile). Yellow with black spiral stripe. All sizes are perforated. 14

. Reference pages 108-117.

100' length coiled in a carton. Continuous transfer. Example: “ 500 MP/Air Drill 3/4 Inch (19.0mm) 500 PSI (3.45MPa) WP Made In India” 500 MP/Air Drill 3/4 Inch (19.0mm) 500 PSI (3.45MPa) WP Continuous transfer. Example: “ MSHA IC-11C Made In India” (yellow cover only) Special production runs require minimum order quantities of 3,000 feet for 3/4" through 1 1/2" and 2,500 feet for 2" and larger. None. Cover: MSHA IC-11C, Flame resistant. Yellow cover only.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #26 October 2001

Industrial Hose Products/List Prices

Powerbraid® Plus Slim Hole Rotary

Oilfield Hose

(Specification 3670H, 4651RL) Part No. 309065 309066 309067

Nom. I.D. (ln.) 2 2 1/2 3

(mm) 51.0 63.0 76.0

Nom. O.D. (ln.) 2.63 3.38 3.90

(mm) 66.8 85.9 99.1

Max. W.P. (psi) 3000 2500 2000

(MPa) 20.67 17.23 13.79

Suction (ln. Hg) (mm Hg) — — — — — —

Min. Bend Radius (ln.) 25.0 30.0 36.0

(mm) 635 762 914

Wt. Per Ft. (Lbs.) 2.95 4.00 4.33

(Kg) 1.34 1.82 1.97

Standard Pack 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 3670-0655 3670-0656 3670-0657

List Price Per Ft. $66.99 78.04 83.61

Rotary applications on workover rigs and slim hole or seismograph rigs designed to operate at a maximum of 2,000 to 3,000 PSI WP depending on size. Applications on small or medium-size drilling rigs used for water well operations, water well core drill, blast or shot hole operations. Hoses are flexible connectors in pressure lines used in conveying mud or air. For normal air or mud applications and where increased resistance to external abuse or pump pulsations is required.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: 2” Type A (Neoprene), 2 1/2” and 3” Type C (Nitrile). Black. Reinforcement: High tensile steel wire. Cover: Type A (Neoprene). Black with blue longitudinal stripes.

COUPLINGS:

71 Permanent (Mulconroy) or reusable male couplings (Wildman). Gates PCS couplings 2” size only. Reference pages 107-117.

50 ft. length coiled in a carton.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Powerbraid® Plus 2 Inch 3000 PSI WP Slim Hole Rotary Made In

Special production runs require minimum order quantities of 600 feet per size. Maximum length available is 50 ft. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade D

Black Gold® Rotary Vibrator

Oilfield Hose API Grade D – 10,000 Test Part No. 313000 313001 313002 313003 313004 313005 313006 313007 313008 313009 313010 313011 313012 313013 313014 313015 313016 313017 313018 313019 313020 313021 313022 313023 313024 313025 313026 313027 313028 313029 313030 313031

Nom. I.D. (ln.) 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 3 3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4

(mm) 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0

Nom. O.D. (ln.) 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 5.28 5.28 5.28 5.28 5.28 5.28 5.28 5.28 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

(mm) 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 134.0 134.0 134.0 134.0 134.0 134.0 134.0 134.0 159.0 159.0 159.0 159.0 159.0 159.0 159.0 159.0

(Specification 4774) Max. W.P. (psi) 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000

(MPa) 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47

Min. Bend Suction Radius (ln. Hg.) (mm Hg) (ln.) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

(mm) 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1237 1237 1237 1237 1237 1237 1237 1237

Wt. Per Ea. (Lbs.) 149.30 169.06 188.83 208.59 238.24 287.65 337.07 386.48 195.95 217.93 239.92 261.90 294.87 349.83 404.79 459.75 230.47 257.30 284.12 310.94 351.18 418.24 485.30 552.36 360.00 411.66 463.33 514.99 593.39 721.65 850.82 979.98

(Kg) 67.72 76.68 85.65 94.61 108.06 130.48 152.89 175.30 88.88 98.85 108.83 118.80 133.75 158.68 183.61 208.54 104.54 116.71 128.87 141.04 159.29 189.71 220.13 250.55 163.29 186.73 210.16 233.60 269.16 327.34 385.93 444.51

Standard Pack 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 4774-2006 4774-2008 4774-2010 4774-2012 4774-2015 4774-2020 4774-2025 4774-2030 4774-4006 4774-4008 4774-4010 4774-4012 4774-4015 4774-4020 4774-4025 4774-4030 4774-6006 4774-6008 4774-6010 4774-6012 4774-6015 4774-6020 4774-6025 4774-6030 4774-8006 4774-8008 4774-8010 4774-8012 4774-8015 4774-8020 4774-8025 4774-8030

Flexible connection between standpipe and swivel for pumping mud at high pressures in oil drilling and exploration work. -4ºF to +180ºF (-20ºC to +82ºC) continuous service. Tube: Type C3 (Modified Nitrile). 3/16" thick. Black. Specially compounded for handling abrasive, corrosive and oily drilling mud. Reinforcement: Multiple layers of polyester cord over tube. Multiple layers of "close wound" high tensile steel cables, with one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement over cables through body of hose. Cover: Type C4 (Modified Nitrile). Black. Specially compounded UltraBrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather. One longitudinal yellow layline running the length of the hose.

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate.

BRANDING:

SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 5000 PSI API SPEC 7K TESTED TO 10,000 PSI GRADE D ISO 6807 LICENSE 7K-0003 Made in U.S.A.” 6 ft. is minimum length available, 30 ft. is maximum. None. API (American Petroleum Institute) Spec 7K.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ea. $7,792.00 8,063.00 8,666.00 9,310.00 10,143.00 11,086.00 11,986.00 12,852.00 7,836.30 8,374.50 9,397.80 10,024.20 10,815.30 11,877.30 12,768.30 14,009.40 9,873.00 10,659.60 11,376.00 11,833.20 12,752.10 14,340.60 15,846.30 19,017.90 11,289.30 12,015.55 12,735.31 14,006.25 15,095.63 16,904.77 18,713.91 20,529.53

The Gates Rubber Company

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade D

Black Gold® Rotary Drilling

Oilfield Hose API Grade D – 10,000 Test Part No. 312000 312001 312002 312003 312004 312005 312006 312007 312008 312009 312010 312011 312012 312013 312014 312015 312016 312017 312018 312019 312020 312021 312022 312023 312024 312025 312026 312027 312028

Nom. I.D. (ln.) 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1/2 3 1/2 3 1/2

(mm) 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 89.0 89.0 89.0

Nom. O.D. (ln.) 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.23 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 4.78 5.28 5.28 5.28

(mm) 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 107.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 121.0 134.0 134.0 134.0

(Specification 4774) Max. W.P. (psi) 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000

(MPa) 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47

Suction (ln. Hg) (mm Hg) -

Min. Bend Radius (ln.) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0

(mm) 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219

Wt. Per Ea. (Lbs.) 435.89 485.31 534.72 584.14 633.55 682.96 732.38 781.79 831.20 880.62 930.03 949.79 979.44 514.71 569.66 624.62 679.58 734.54 789.50 844.45 899.41 954.37 1009.33 1064.29 1086.27 1119.24 619.42 686.48 753.54

(Kg) 197.72 220.13 242.55 264.96 287.37 309.79 332.20 354.61 377.03 399.44 421.86 430.82 444.27 233.47 258.39 283.32 308.25 333.18 358.11 383.04 407.97 432.90 457.82 482.75 492.72 507.68 280.96 311.38 341.80

Standard Pack 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft. 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft. 35 ft. 40 ft. 45 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 4774-2035 4774-2040 4774-2045 4774-2050 4774-2055 4774-2060 4774-2065 4774-2070 4774-2075 4774-2080 4774-2085 4774-2087 4774-2090 4774-4035 4774-4040 4774-4045 4774-4050 4774-4055 4774-4060 4774-4065 4774-4070 4774-4075 4774-4080 4774-4085 4774-4087 4774-4090 4774-6035 4774-6040 4774-6045

List Price Per Ea. $13,731.00 14,689.00 15,311.00 16,473.00 17,370.00 18,664.00 20,203.00 22,221.00 23,778.00 26,105.00 28,289.00 30,356.00 31,902.00 15,306.30 16,500.60 17,613.90 19,144.80 20,532.60 21,866.40 23,040.00 24,209.10 25,385.40 26,970.30 28,551.60 29,879.10 31,389.30 20,906.10 21,857.40 22,787.10

Flexible connection between standpipe and swivel for pumping mud at high pressures in oil drilling and exploration work.

RECOMMENDED FOR:

-4ºF to +180ºF (-20ºC to +82ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type C3 (Modified Nitrile). 3/16" thick. Black. Specially compounded for handling abrasive, corrosive and oily drilling mud. Reinforcement: Multiple layers of polyester cord over tube. Multiple layers of "close wound" high tensile steel cables, with one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement over cables through body of hose. Cover: Type C4 (Modified Nitrile). Black. Specially compounded UltraBrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather. One longitudinal yellow layline runnning the length of the hose.

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate. Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 5000 PSI API SPEC 7K TESTED TO 10,000 PSI GRADE D ISO 6807 LICENSE 7K-0003 Made in U.S.A.”

BRANDING:

SPECIAL ORDER REQUIREMENTS:

35 ft. is minimum length available, 90 ft. is maximum. None.

REMNANT LENGTHS:

API (American Petroleum Institute) Spec 7K.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade D

Black Gold® Rotary Drilling

Oilfield Hose API Grade D – 10,000 Test Part No. 312029 312030 312031 312032 312033 312034 312035 312036 312037 312038 312039 312040 312041 312042 312043 312044 312045 312046 312047 312048 312049 312050 312051

Nom. I.D. (ln.) 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4 4 4 4 4 4

312100 312099 312101 312103 312102 312104

2 1/2 2 1/2 3 3 3 1/2 3 1/2

(mm) 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0

Nom. O.D. (ln.) 5.28 5.28 5.28 5.28 5.28 5.28 5.28 5.28 5.28 5.28 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26 6.26

(mm) 134.0 134.0 134.0 134.0 134.0 134.0 134.0 134.0 134.0 134.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0 154.0

(Specification 4774) Max. W.P. (psi) 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000

Suction (ln. Hg) (mm Hg) -

(MPa) 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47 34.47

Min. Bend Radius (ln.) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

(mm) 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237

Wt. Per Ea. (Lbs.) 820.60 887.66 954.72 1021.78 1088.84 1155.90 1222.96 1290.02 1316.84 1357.08 1109.14 1238.30 1367.47 1496.63 1625.79 1754.96 1884.12 2013.28 2142.45 2271.61 2400.77 2452.44 2529.93

(Kg) 372.22 402.64 433.05 463.47 493.89 524.31 554.73 585.14 597.31 615.56 503.10 561.68 620.27 678.86 737.45 796.04 854.62 913.21 971.80 1030.39 1088.97 1112.41 1147.56

Standard Pack 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft. 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft.

1219 1219 1219 1219 1219 1219

1053.00 1053.00 1738.00 1128.00 1929.00 1369.00

477.63 477.63 788.34 511.65 874.98 620.97

90 ft. REEL 90 ft. REEL 90 ft. REEL

For Certified Oilfield Hose Fabricators Only 63.0 63.0 76.0 76.0 89.0 89.0

4.23 4.23 4.78 4.78 5.28 5.28

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

107.0 107.0 121.0 121.0 134.0 134.0

5000 5000 5000 5000 5000 5000

34.47 34.47 34.47 34.47 34.47 34.47

48.0 48.0 48.0 48.0 48.0 48.0

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 4774-6050 4774-6055 4774-6060 4774-6065 4774-6070 4774-6075 4774-6080 4774-6085 4774-6087 4774-6090 4774-8035 4774-8040 4774-8045 4774-8050 4774-8055 4774-8060 4774-8065 4774-8070 4774-8075 4774-8080 4774-8085 4774-8087 4774-8090

Plain End Hose 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

4774-2001 4774-9029 4774-4001 4774-9003 4774-6001 4774-9004

$22,368.60 22,368.60 23,990.40 23,990.40 27,013.50 27,013.50

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate. 3" and 3 1/2": Packaged 90' to a reel. Maximum of one length.

BRANDING:

SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 5000 PSI API SPEC 7K TESTED TO 10,000 PSI GRADE D ISO 6807 LICENSE 7K-0003 Made in U.S.A.” 35 ft. is minimum length available, 90 ft. is maximum. None. API (American Petroleum Institute) Spec 7K.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ea. $23,877.90 24,545.70 25,882.20 27,217.80 28,551.60 31,298.40 32,901.30 34,418.70 35,117.10 36,098.10 22,390.55 24,199.69 26,015.31 27,824.45 29,633.59 31,422.73 33,258.36 35,067.50 36,876.64 38,692.27 40,501.41 41,227.66 42,732.03

The Gates Rubber Company

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade E

Black Gold® Rotary Vibrator

Oilfield Hose API Grade D – 15,000 Test Part No. 313250 313251 313252 313253 313254 313255 313256 313257 313258 313259 313260 313261 313262 313263 313264 313265 313266 313267 313268 313269 313270 313271 313272 313273 313274 313275 313276 313277 313278 313279 313280 313281

Nom. I.D. (ln.) 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1.2 3 3 3 3 3 3 3 3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4

(mm) 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0

Nom. O.D. (ln.) 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67

(mm) 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 157.0 157.0 157.0 157.0 157.0 157.0 157.0 157.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0

(Specification 4773E) Max. W.P. (psi) 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500

(MPa) 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71

Min. Bend Suction Radius (ln. Hg.) (mm Hg) (ln.) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

(mm) 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1219 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237

Wt. Per Ea. (Lbs.) 264.08 305.45 346.81 388.17 450.21 553.62 657.02 760.42 298.41 344.54 390.68 436.81 506.02 621.35 736.69 852.03 350.02 401.70 453.37 505.05 582.56 711.74 840.93 970.12 376.64 433.86 491.07 548.28 634.11 777.14 920.18 1063.21

(Kg) 119.78 138.55 157.31 176.07 204.21 251.12 298.02 344.92 135.36 156.28 177.21 198.13 229.53 281.84 334.16 386.47 158.77 182.21 205.65 229.09 264.25 322.84 381.44 440.04 170.84 196.80 222.75 248.70 287.63 352.51 417.39 482.26

Standard Pack 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 6 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft. 7 ft. 8 ft. 10 ft. 12 ft. 15 ft. 20 ft. 25 ft. 30 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

List Gates Price Item No. Per Ea. 4773-1106 $10,164.24 4773-1108 13,552.34 4773-1110 14,272.11 4773-1112 14,991.88 4773-1115 16,042.34 4773-1120 17,819.06 4773-1125 19,718.98 4773-1130 21,353.05 4773-3106 11,034.78 4773-3108 14,713.05 4773-3110 15,484.69 4773-3112 16,256.33 4773-3115 17,391.09 4773-3120 19,303.98 4773-3125 21,340.08 4773-3130 23,103.83 4773-5106 12,167.94 4773-5108 16,223.91 4773-5110 17,060.39 4773-5112 17,896.88 4773-5115 19,122.42 4773-5120 21,184.45 4773-5125 23,376.17 4773-5130 25,302.03 4773-7107 15,313.69 4773-7108 17,501.33 4773-7110 18,402.66 4773-7112 19,297.50 4773-7115 20,613.83 4773-7120 22,837.97 4773-7125 25,178.83 4773-7130 27,253.83

Flexible connection between standpipe and swivel for pumping mud at high pressures in oil drilling and exploration work.

RECOMMENDED FOR:

-4ºF to +180ºF (-20ºC to +82ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type C3 (Modified Nitrile). 3/16" thick. Black. Specially compounded for handling abrasive, corrosive and oily drilling mud. Reinforcement: Multiple layers of polyester cord over tube. Two layers of "close wound" high tensile steel cables, with one layer of adhesion fabric placed between cable layers. Multiple layers of reinforcement over cables through body of hose. Cover: Type C4 (Modified Nitrile). Black. Specially compounded UltraBrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather. One longitudinal yellow layline running the length of the hose.

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate. Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 7500 PSI API SPEC 7K TESTED TO 15,000 PSI GRADE E ISO 6807 LICENSE 7K-0003 Made in U.S.A.”

BRANDING:

SPECIAL ORDER REQUIREMENTS:

6 ft. is minimum length available, 30 ft. is maximum. None.

REMNANT LENGTHS:

API (American Petroleum Institute) Spec 7K.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade E

Black Gold® Rotary Drilling

Oilfield Hose API Grade D – 15,000 Test Part No. 313282 313283 313284 313285 313286 313287 313288 313289 313290 313291 313292 313293 313294 313295 313296 313297 313298 313299 313300 313301 313302 313303 313304 313305 313306 313307 313308 313309 313310

Nom. I.D. (ln.) 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1/2 3 1/2 3 1/2

(mm) 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 63.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 76.0 89.0 89.0 89.0

Nom. O.D. (ln.) 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.17 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 5.67 6.18 6.18 6.18

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

(mm) 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 131.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 144.0 157.0 157.0 157.0

(Specification 4773E) Max. W.P. (psi) 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500

(MPa) 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71

Suction (ln. Hg) (mm Hg) -

Min. Bend Radius (ln.) 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 48.0 54.0 54.0 54.0

(mm) 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1214 1237 1237 1237

Wt. Per Ea. (Lbs.) 863.83 967.23 1070.64 1174.04 1277.44 1381.28 1484.25 1587.66 1691.06 1794.46 1897.87 1939.23 2001.27 967.37 1082.07 1198.05 1313.39 1428.72 1544.06 1659.40 1774.74 1935.78 2005.42 2120.75 2166.89 2236.09 1099.30 1228.49 1357.67

(Kg) 391.83 438.73 485.63 532.54 579.44 626.54 673.25 720.15 767.05 677.88 860.86 879.62 907.76 438.79 490.82 543.43 595.74 648.06 700.37 752.69 805.01 878.06 909.64 961.96 982.89 1014.27 498.63 557.23 615.83

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 4773-1135 4773-1140 4773-1145 4773-1150 4773-1155 4773-1160 4773-1165 4773-1170 4773-1175 4773-1180 4773-1185 4773-1187 4773-1190 4773-3135 4773-3140 4773-3145 4773-3150 4773-3155 4773-3160 4773-3165 4773-3170 4773-3175 4773-3180 4773-3185 4773-3187 4773-3190 4773-5135 4773-5140 4773-5145

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate.

BRANDING:

SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 7500 PSI API SPEC 7K TESTED TO 15,000 PSI GRADE E ISO 6807 LICENSE 7K-0003 Made in U.S.A.” 35 ft. is minimum length available, 90 ft. is maximum. None. API (American Petroleum Institute) Spec 7K.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ea. $22,987.11 24,621.17 26,255.23 27,889.30 29,523.36 31,157.42 32,791.48 34,898.91 36,532.97 38,167.03 39,801.09 40,456.02 41,435.16 24,874.06 26,644.30 28,408.05 30,178.28 31,948.52 33,718.75 35,482.50 37,726.09 39,496.33 41,260.08 43,030.31 43,737.11 44,800.55 27,227.89 29,147.24 31,073.13

The Gates Rubber Company

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Grade E

Black Gold® Rotary Drilling

Oilfield Hose API Grade D – 15,000 Test Part No. 313311 313312 313313 313314 313315 313316 313317 313318 313319 313320 313321 313322 313323 313324 313325 313326 313327 313328 313329 313330 313331 313332 313333

Nom. I.D. (ln.) 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4 4 4 4 4 4 4 4 4

(mm) 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 89.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0 102.0

Nom. O.D. (ln.) 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.18 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67 6.67

(mm) 157.0 157.0 157.0 157.0 157.0 157.0 157.0 157.0 157.0 157.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0 169.0

(Specification 4773E) Max. W.P. (psi) 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500 7500

(MPa) 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71 51.71

Suction (ln. Hg) (mm Hg) -

Min. Bend Radius (ln.) 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0

(mm) 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237 1237

Wt. Per Ea. (Lbs.) 1486.86 1616.05 1745.23 1874.42 2003.60 2132.79 2261.98 2391.16 2442.84 2520.35 1206.25 1349.28 1492.32 1635.35 1778.39 1921.42 2064.46 2207.49 2350.53 2493.56 2636.60 2693.81 2779.63

(Kg) 674.43 733.03 791.62 850.22 908.82 967.42 1026.02 1084.61 1108.05 1143.21 547.15 612.02 676.91 741.78 806.66 871.54 936.42 1001.30 1066.18 1131.06 1195.94 1221.89 1260.82

Standard Pack 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft. 35 ft. 40 ft. 45 ft. 50 ft. 55 ft. 60 ft. 65 ft. 70 ft. 75 ft. 80 ft. 85 ft. 87 ft. 90 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 4773-5150 4773-5155 4773-5160 4773-5165 4773-5170 4773-5175 4773-5180 4773-5185 4773-5187 4773-5190 4773-7135 4773-7140 4773-7145 4773-7150 4773-7155 4773-7160 4773-7165 4773-7170 4773-7175 4773-7180 4773-7185 4773-7187 4773-7190

List Price Per Ea. $32,998.98 34,924.84 36,844.22 38,770.08 41,169.30 43,088.67 45,014.53 46,940.39 47,712.03 48,866.25 29,335.31 31,410.31 33,491.80 35,566.80 37,648.28 39,723.28 41,804.77 44,353.13 46,434.61 48,509.61 50,591.09 51,421.09 52,666.09

Flexible connection between standpipe and swivel for pumping mud at high pressures in oil drilling and exploration work.

RECOMMENDED FOR:

-4ºF to +180ºF (-20ºC to +82ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

COUPLINGS:

Special built-in—API male thread ends standard. Can be furnished with special hubs or flanges welded in place. NOTE: FIELD WELDING OF FITTINGS TO COUPLING IS NOT RECOMMENDED.

PACKAGING:

Each length packaged in a heavy-duty wooden crate. Continuous transfer label (with serial number and code date embossed). Example: “ BLACK GOLD® ROTARY VIBRATOR 2 1/2 Inch MAX WP 7500 PSI API SPEC 7K TESTED TO 15,000 PSI GRADE E ISO 6807 LICENSE 7K-0003 Made in U.S.A.”

BRANDING:

SPECIAL ORDER REQUIREMENTS:

35 ft. is minimum length available, 90 ft. is maximum. None.

REMNANT LENGTHS:

API (American Petroleum Institute) Spec 7K.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 33496-000 January 2, 1998

Industrial Hose Products/List Prices

Safety Clamps & Chain

Oilfield Hose

For Rotary Vibrator/Drilling Hose Part No.

309050 309051 309052

Nom. I.D. (In.)

2 1/2 3 3 1/2

SAFETY CLAMP:

NOTE:

(mm)

Standard Pack

Stock (X) or Minimum Order Qty.

Gates Item. No.

List Price Per Ea.

63.0 76.0 89.0

1 ea. 1 ea. 1 ea.

X X X

7361-0801 7361-0805 7361-0810

$400.00 400.00 400.00

A set of safety clamps can be obtained on special order. Location for attaching these safety clamps is shown by notations marked at each end of the assembly.

Not sold separately.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

速

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Longhorn®

Petroleum Transfer Hose

(Specification 4688CC/4688DC) Smooth Cover (4688CC) Part No. 307050 307051 307052 307054 307055 307056 307057 307059

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 152.0

Nom. O.D. (ln.) 1.50 1.75 2.02 2.52 3.05 3.58 4.60 6.88

Max. W.P (psi) 150 150 150 150 150 150 150 150

(mm) 38.1 45.0 51.3 64.0 77.5 90.9 116.8 174.8

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 3.0 4.0 4.0 6.0 8.0 9.0 12.0 18.0

(MPa) 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 5.0 8.0 11.0

(mm) 76 102 102 152 203 229 305 457

Wt. Per Ft. (Lbs.) .59 .71 .87 1.12 1.48 1.87 2.72 6.28

(mm) 127 203 279

Wt. Per Ft. (Lbs.) 1.08 1.70 2.50

(Kg) .27 .32 .40 .51 .67 .85 1.23 2.85

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X

Gates Item No. 4688-1305 4688-1306 4688-1307 4688-1308 4688-1309 4688-1310 4688-1311 4688-1312

List Price Per Ft. $11.34 12.41 13.61 14.31 19.08 22.00 31.10 74.64

(Kg) .49 .77 1.13

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 4688-1351 4688-1352 4688-1353

List Price Per Ft. $14.31 22.00 31.10

Corrugated Cover (4688DC) Part No. 307060 307061 307062

Nom. I.D. (ln.) 2 3 4

(mm) 51.0 76.0 102.0

Nom. O.D. (ln.) 2.47 3.50 4.58

Max. W.P (psi) 150 150 150

(mm) 62.7 88.9 116.3

Commercial gasolines, diesel oils, fuel oils and other petroleum products. Ideal for oil field service truck use.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC). NOTE: Fuels are normally conveyed below 120ºF (49ºC).

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type A (Neoprene). Black with red spiral stripe.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING:

Continuous transfer label. Example: “ Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Longhorn® Petroleum Transfer 150 PSI (1.03MPa) WP

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000

June 3, 2002

Industrial Hose Products/List Prices

Supersedes Supplement #22 December, 2001

Master-Flex® Fuel Delivery

Petroleum Transfer Hose

(Specification 7744) Part No. 310000 310001

Nom. I.D. (ln.) 3 4

(mm) 76.0 102.0

Nom. O.D. (ln.) 3.76 4.79

Max. W.P.* (psi) 65 65

(mm) 95.5 121.7

(MPa) .45 .45

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711

Min. Bend Radius (ln.) (mm) 6.0 152 8.0 203

Wt. Per Ft. (Lbs.) 1.20 1.80

(Kg) .54 .82

Standard Pack 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X

Gates Item No. 7744-7103 7744-7104

List Price Per Ft. $30.28 38.87

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING:

Tank truck or storage tank transfer of commercial gasoline, diesel fuel, oils and other petroleum products. Ideal for oilfield service truck use. -30ºF to +130ºF (-34ºC to +55ºC). NOTE: Fuels are normally conveyed below 120ºF (49ºC). Tube: Type C3 (PETROTHANE™). Black. Reinforcement: Polyester fabric with static wire. Cover: Type G (PVC). Black with yellow helix. 6

, or

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Unlabeled.

SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

Master-Flex® Fuel Delivery Sleeve Part No. 310002 310003

Nom. I.D. (In.) 3 4

Wt. Per EA. (Lbs.) 5.13 7.32

(mm) 76.0 102.0

(Kg) 2.33 3.32

Standard Pack 3 ft. 3 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA

Gates Item. No. 7744-8103 7744-8104

List Price Per Ea. $45.24 50.64

Soft Black PVC sleeve is designed to fit Gates Fuel Delivery Hose and provides a smooth banding surface. INSTALLATION: Apply the sleeve by twisting in a clockwise direction. Use of an appropriate lubricant, i.e. soapy water solution, will simplify sleeve application and reduce possibility of damage to hose cover. Make sure sleeve is applied prior to coupling insertion.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Maverick®

Petroleum Transfer Hose

(Specification 4687R) Part No. 319000 319001 319002

Nom. I.D. (ln.) 2 3 4

(mm) 51.0 76.0 102.0

Nom. O.D. (ln.) 2.54 3.57 4.57

Max. W.P (psi) 100 100 100

(mm) 64.5 90.7 116.1

(MPa) .69 .69 .69

Suction (ln. Hg.) (mm Hg) 762 30.0 762 30.0 30.0 762

Min. Bend Radius (ln.) 4.0 6.0 11.0

(mm) 102 152 279

Wt. Per Ft. (Lbs.) 1.15 1.76 2.29

(Kg) .52 .80 1.04

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft.

Gates Item No. 4687-0251 4687-0252 4687-0253

List Price Per Ft. $12.88 19.80 27.99

Tank truck or storage tank transfer of commercial gasolines, diesel fuel, oils and other petroleum products. Ideal for oilfield service truck use.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC). NOTE: Fuels are normally conveyed below 120ºF (49ºC).

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type C2 (Modified Nitrile). Red corrugated with white spiral stripe.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Maverick® Petroleum Transfer 100 PSI (.69MPa) WP Made In

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #10 May, 1999

Industrial Hose Products/List Prices

Brahma®

Petroleum Transfer Hose

(Specification 4688RB) Part No. 306925 306926 306927

Nom. I.D. (ln.) 2 3 4

(mm) 51.0 76.0 102.0

Nom. O.D. (ln.) 2.42 3.47 4.52

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P (psi) 150 150 150

(mm) 61.5 88.1 114.8

(MPa) 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) 762 30.0 762 30.0 30.0 762

Min. Bend Radius (ln.) 5.0 8.0 11.0

(mm) 127 203 279

Wt. Per Ft. (Lbs.) .98 1.53 2.10

(Kg) .45 .69 .95

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 4688-1505 4688-1507 4688-1508

Use for commercial gasoline, diesel oils, fuel oils and other petroleum products where external abrasion resistance is critical. Ideal for oil field service truck use. -40ºF to +180ºF (-40ºC to +82ºC). WARNING: Do not convey fuels over 120ºF (49ºC). Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type L (UHMWPE) over a base of Type A (Neoprene). Black corrugated cover with black dots and red spiral stripe. 7

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene. Continuous transfer label. Example: “ In U.S.A.”

Brahma® Petroleum Transfer 150 PSI (1.03MPa) WP Made

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $15.74 24.20 34.21

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000

Industrial Hose Products/List Prices

January 2, 1998

Steer®

Petroleum Transfer Hose

(Specification 4688CN) Part No. 309900 309901 309902

Nom. I.D. (ln.) 2 3 4

(mm) 51.0 76.0 102.0

Nom. O.D. (ln.) 2.44 3.45 4.51

Max. W.P (psi) 150 150 150

(mm) 62.0 87.6 115.0

(MPa) 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) -

Min. Bend Radius (ln.) -

(mm) -

Wt. Per Ft. (Lbs.) .93 1.39 2.03

(Kg) .42 .63 .92

Standard Pack 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 4688-1320 4688-1321 4688-1322

RECOMMENDED FOR:

Commercial gasolines, diesel oils, fuel oils and other petroleum products for discharge service.

TEMPERATURE:

-40ºF to +180ºF (-40ºC to +82ºC). NOTE: Fuels are normally conveyed below 120ºF (49ºC).

List Price Per Ft. $12.88 19.80 27.99

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with static conductor. Cover: Type A (Neoprene). Black with red spiral stripe.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene.

PACKAGING:

Continuous transfer label. Example: “ WP Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Steer® Petroleum Transfer Discharge 150 PSI (1.03MPa)

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #23 December, 2001

Industrial Hose Products/List Prices

Master-Flex® Vapor Recovery

Petroleum Transfer Hose

(Specification 7744) Part No. 310025 310026 310027 310028 310029 310030

Nom. I.D. (ln.) 1 1/2 2 3 4 5 6

(mm) 38.0 51.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 1.88 2.43 3.54 4.56 5.51 6.52

Max. W.P.* (psi) 5 5 5 5 5 5

(mm) 47.8 61.7 89.9 115.8 140.0 165.6

(MPa) .03 .03 .03 .03 .03 .03

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 1.5 2.0 3.0 4.0 5.0 6.0

(mm) 38 51 76 102 127 152

Wt. Per Ft. (Lbs.) .36 .48 .69 .92 1.13 1.24

(Kg) .16 .22 .31 .42 .51 .56

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 1,000 ft. X X X 1,000 ft. 1,000 ft.

Gates Item No. 7744-7015 7744-7020 7744-7030 7744-7040 7744-7050 7744-7060

List Price Per Ft. $8.56 11.02 19.95 29.50 34.85 56.88

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Vapor Recovery for use with Gates Brahma®, Longhorn® and Master-Flex® Fuel Delivery. Can also be used for ducting, dust and light abrasive material handling. -30ºF to +140ºF (-34ºC to +60ºC) continuous service. Tube: Clear Polyurethane. Reinforcement: Rigid yellow PVC helix with copper static wire. 7

. Reference pages 108-117.

100' length coiled and wrapped in polyethylene. Unlabeled. Special production runs require minimum order quantities of 1,000 feet per size. No deviations allowed to above product. None.

Master-Flex® Vapor Recovery Sleeve Part No. 310031 310032

Nom. I.D. (In.) 3 4

Wt. Per Ea. (Lbs.) 5.13 7.32

(mm) 76.0 102.0

(Kg) 2.33 3.32

Standard Pack 3 ft. 3 ft.

Stock (X) or Minimum Order Qty. 1 EA 1 EA

Gates Item. No. 7744-8030 7744-8040

List Price Per Ea. $45.24 50.64

Soft Gray PVC sleeve is designed to fit Gates Vapor Recovery Hose and provides a smooth banding surface. INSTALLATION: Apply the sleeve by twisting in a clockwise direction. Use of an appropriate lubricant, i.e. soapy water solution, will simplify sleeve application and reduce possibility of damage to hose cover. Make sure sleeve is applied prior to coupling insertion.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 36496-000 January 2, 1998

Industrial Hose Products/List Prices

Super-Vac®

Petroleum Transfer Hose

(Specification 4688V) Part No. 307075 307076 307077 307079 307081 307082 307084 307086 307087

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 6 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 152.0 152.0

Nom. O.D. (ln.) 1.42 1.68 1.97 2.47 2.99 3.52 4.52 6.67 6.67

Max. W.P (psi) 150 150 150 150 150 150 100 60 60

(mm) 36.1 42.7 50.0 62.7 75.9 89.4 114.8 169.4 169.4

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 .69 .41 .41

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 3.0 3.0 3.0 4.0 5.0 6.0 8.0 18.0 18.0

(mm) 76 76 76 102 127 152 203 457 457

Wt. Per Ft. (Lbs.) .52 .67 .77 .99 1.46 1.76 2.29 4.37 4.37

(Kg) .24 .30 .35 .45 .66 .80 1.04 1.99 1.99

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 50 ft. 20 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X X

Gates Item No. 4688-0651 4688-0653 4688-0656 4688-0665 4688-0675 4688-0680 4688-0690 4688-0698 4688-0697

List Price Per Ft. $8.53 9.05 9.84 12.11 15.68 17.88 23.93 39.87 39.87

Tank truck service, including oil field vacuum truck, where full suction or rated working pressures are required. Ideal for applications handling crude oil, salt and fresh water, tank bottoms, drilling mud, dilute solutions of hydrochloric acids and diesel fuels. Reference Gates Chemical Resistance Table on page 139.

RECOMMENDED FOR:

NOTE: NOT RECOMMENDED FOR REFINED PETROLEUM PRODUCTS SUCH AS GASOLINE. -40ºF to +150ºF (-40ºC to +66ºC) continuous service. NOTE: Diesel fuel normally conveyed below 120ºF (49ºC).

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type D (SBR). Black corrugated with blue spiral stripe.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Super-Vac® Oil Field Vacuum 150 PSI (1.03MPa) WP Made In

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #28 October, 2001

Industrial Hose Products/List Prices

LP350 Butane-Propane

Petroleum Transfer Hose

(Specification 3220A, 3220LP, 3320) Part No. 307630 307631 307632 307633 307634 307635 307636 307637 307638 307639 307640 307641 307642 307643 307211 307212 307213 307214

Nom. I.D. (ln.) 1/4 1/4 3/8 3/8 1/2 1/2 3/4 3/4 3/4 3/4 1 1 1 1 1 1/4 1 1/2 2 3

(mm) 6.3 6.3 9.5 9.5 12.7 12.7 19.0 19.0 19.0 19.0 25.4 25.4 25.4 25.4 31.8 38.0 51.0 76.0

Nom. O.D. (ln.) .56 .56 .70 .70 .84 .84 1.23 1.23 1.23 1.23 1.51 1.51 1.51 1.51 1.85 2.25 2.86 3.88

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING:

Max. W.P (psi) 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350 350

(mm) 14.2 14.2 17.8 17.8 21.3 21.3 31.2 31.2 31.2 31.2 38.4 38.4 38.4 38.4 47.0 57.1 72.6 98.6

(MPa) 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41 2.41

Min. Bend Radius (ln.) 3.0 3.0 3.0 3.0 5.0 5.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 8.0 10.0 12.0 14.0 24.0

(mm) 76 76 76 76 127 127 152 152 152 152 203 203 203 203 254 305 356 610

Wt. Per Ft. (Lbs.) .12 .12 .16 .16 .22 .22 .44 .44 .44 .44 .60 .60 .60 .60 .89 1.35 2.01 2.77

REMNANT LENGTHS: STANDARDS:

Stock (X) or Minimum Order Qty. X 4500 ft. (X) X 2500 ft. (X) X 1300 ft. (X) X X X X X X X X X X X X

Gates Item No. 3220-1100 3220-5994 3220-1101 3220-5995 3220-1102 3220-6001 3220-1108 3220-1109 3220-1110 3220-1111 3220-1104 3220-1106 3220-1107 3220-1105 3220-0855 3320-0935 3320-0938 3320-0934

Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type A (Neoprene). Black. All sizes are perforated. Type C2 (Modified Nitrile). Black. For 1 1/4" only. Perforated. 72

Gates permanent Power Crimp®. Reference pages 108-117.

1/4" through 1/2":

Packaged in 600' to 800' reels. Maximum 4 pieces. One length 25' to 50'. Maximum of 2 pieces under 100'. 3/4" through 1 1/4": Packaged in 300' to 400' reels. Maximum 3 pieces. One length 25' to 50'. All other lengths over 50'. Maximum of 2 pieces under 100'. 3/4" and 1" Cut lengths: Coiled in cartons. 1/4" Bulk Pack: Packaged 4500' in a pallet carton. Maximum 20 pieces. Maximum of 6 pieces under 25'. Minimum length 10'. 3/8" Bulk Pack: Packaged 2500' in a pallet carton. Maximum 20 pieces. Maximum of 6 pieces under 25'. Minimum length 10'. 1/2" Bulk Pack: Packaged 1300' in a pallet carton. Maximum 20 pieces. All lengths in increments of 25'. Minimum length 25'. Packaged 60' in a carton.

Continuous molded strip brand label. Example: “ DO NOT EXCEED 350 PSI WP Made In U.S.A.”

LP350

UL/CGA TYPE 1 LP-Gas Hose 1 INCH LP-Gas Hose 2 INCH DO NOT EXCEED

Special production runs require minimum order quantities of 10,000 feet for sizes through 3/8", 5,000 feet 1/2" through 1 1/4", and 600 feet above 1 1/4". 3/4" and 1" cut lengths are available as standard items as listed above. Any other size in specified lengths requires a minimum production order. For price, add 15% (x1.15) to above reel prices. None. Underwriters Laboratories Standard No. 21. CAN/CGA-8.1-M86. NFPA 58, Section 2-4.6.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $2.99 2.69 3.87 3.48 5.19 4.67 8.71 10.01 10.01 10.01 10.95 12.59 12.59 12.59 21.79 27.78 35.40 59.71

-40ºF to +180ºF (-40ºC to +82ºC) continuous service. Reference page 7 for additional information.

Continuous molded strip brand label. Example: “ LP350 350 PSI WP Made In U.S.A.” (for 1 1/4" through 3" sizes only)

SPECIAL ORDER REQUIREMENTS:

(Kg) .05 .05 .07 .07 .10 .10 .20 .20 .20 .20 .27 .27 .27 .27 .40 .61 .91 1.26

Standard Pack REEL BULK REEL BULK REEL BULK REEL 100 ft. 125 ft. 150 ft. REEL 100 ft. 125 ft. 150 ft. REEL 60 ft. 60 ft. 60 ft.

Liquid or gaseous propane, butane or any combination of these two mixtures. Can be used for natural gas under certain conditions such as: open/outside areas and well ventilated factory buildings (if local building codes permit). Not recommended for residential or office buildings. Contact Denver Product Application (303) 744-5070 for inspection and assembly testing information.

1 1/2" and over:

BRANDING:

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 25.0 635 25.0 635 20.0 508 20.0 508 20.0 508 20.0 508 15.0 381 15.0 381 381 15.0 381 15.0 254 10.0 254 10.0 254 10.0 254 10.0

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

LPG Vapor

Petroleum Transfer Hose

(Specification 3220E) Part No. 307240 307241 307242

Nom. I.D. (ln.) 3/16 1/4 3/8

(mm) 4.8 6.3 9.5

Nom. O.D. (ln.) .44 .53 .66

(mm) 11.2 13.5 16.8

Max. W.P (psi) 125 125 125

(MPa) .86 .86 .86

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 25.0 635

Min. Bend Radius (ln.) 2.0 3.0 3.0

(mm) 50 76 76

Wt. Per Ft. (Lbs.) .08 .11 .14

(Kg) .04 .05 .06

Standard Pack REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X

Gates Item No. 3220-0451 3220-0456 3220-0461

List Price Per Ft. $1.20 1.25 1.81

Flexible connector for conveying low pressure LPG (vapor only) to many types of heating applications; i.e., space heaters, outdoor gas grills, trailer and camper stoves. NOTE: This hose meets requirements of UL® Bulletin 569, low pressure type. However, only coupled assemblies actually receive UL approval. Assemblers who make coupled hose assemblies are responsible for UL approval of their assemblies.

RECOMMENDED FOR:

-30ºF to +150ºF (-34ºC to +66ºC) continuous service.

TEMPERATURE:

Tube: Type A (Neoprene). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type A (Neoprene). Black. Packaged in 600' to 800' reels. Maximum 4 pieces. One length 25' to 50'. Maximum of 2 lengths under 100'.

CONSTRUCTION:

PACKAGING: BRANDING:

Continuous ink print label. Example: “ U.S.A.”

SPECIAL ORDER REQUIREMENTS:

LPG Vapor 3/8 Inch (9.5mm) 125 PSI (.86MPa) WP Made In

Special production runs require minimum order quantities of 5,000 feet per size. None.

REMNANT LENGTHS:

Underwriters Laboratories Standard No. 569.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Wagon Master® Fuel Oil

Petroleum Transfer Hose

(Specification 3221WM) Part No. 307700 307701 307702 307703 307704 307705 307706 307707 307708 307709 307710 307711 307712 307713 307714 307715

Nom. I.D. (ln.) 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 1/2

(mm) 25.4 25.4 25.4 25.4 31.8 31.8 31.8 31.8 34.9 34.9 34.9 34.9 38.0 38.0 38.0 38.0

Nom. O.D. (ln.) 1.50 1.50 1.50 1.50 1.75 1.75 1.75 1.75 1.87 1.87 1.87 1.87 2.00 2.00 2.00 2.00

Max. W.P (psi) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

(mm) 38.1 38.1 38.1 38.1 44.5 44.5 44.5 44.5 47.5 47.5 47.5 47.5 50.8 50.8 50.8 50.8

(MPa) 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38

Suction (ln. Hg.) (mm Hg) 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0

Nom. I.D. (ln.) 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 1/2

(mm) 25.4 25.4 25.4 25.4 31.8 31.8 31.8 31.8 34.9 34.9 34.9 34.9 38.0 38.0 38.0 38.0

Nom. O.D. (ln.) 1.50 1.50 1.50 1.50 1.75 1.75 1.75 1.75 1.87 1.87 1.87 1.87 2.00 2.00 2.00 2.00

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P (psi) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

(mm) 38.1 38.1 38.1 38.1 44.5 44.5 44.5 44.5 47.5 47.5 47.5 47.5 50.8 50.8 50.8 50.8

(MPa) 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38

Suction (ln. Hg.) (mm Hg) 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 254 10.0 254 10.0 254 10.0 254 10.0

(Kg) .25 .25 .25 .25 .30 .30 .30 .30 .32 .32 .32 .32 .35 .35 .35 .35

Standard Pack 100 ft. 125 ft. 150 ft. 175 ft. 100 ft. 125 ft. 150 ft. 175 ft. 100 ft. 125 ft. 150 ft. 175 ft. 100 ft. 125 ft. 150 ft. 175 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X X X X X X X X X

Gates Item No. 3221-0060 3221-0061 3221-0062 3221-0063 3221-0064 3221-0065 3221-0066 3221-0068 3221-0057 3221-0058 3221-0056 3221-0059 3221-0069 3221-0070 3221-0071 3221-0072

Min. Bend Radius (ln.) 8.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0 12.0 12.0

(mm) 203 203 203 203 254 254 254 254 254 254 254 254 305 305 305 305

Wt. Per Ea. (Lbs.) 60.00 75.00 90.00 105.00 73.00 91.25 109.50 127.75 77.00 96.25 115.50 134.75 85.00 106.25 127.50 148.75

(Kg) 27.22 34.02 40.82 47.63 33.11 41.39 49.67 57.95 34.93 43.66 52.39 61.12 38.56 48.19 57.83 67.47

Standard Pack 100 ft. cpld 125 ft. cpld 150 ft. cpld 175 ft. cpld 100 ft. cpld 125 ft. cpld 150 ft. cpld 175 ft. cpld 100 ft. cpld 125 ft. cpld 150 ft. cpld 175 ft. cpld 100 ft. cpld 125 ft. cpld 150 ft. cpld 175 ft. cpld

Stock (X) or Minimum Order Qty. 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA 1 EA

Gates Item No. 3221-0075 3221-0076 3221-0077 3221-0078 3221-0079 3221-0080 3221-0081 3221-0082 3221-0083 3221-0084 3221-0085 3221-0086 3221-0087 3221-0088 3221-0089 3221-0090

List Price Per Ea. $1619.41 1775.04 1917.35 2117.95 2034.57 2330.20 2596.56 2866.14 2118.62 2424.62 2706.39 3159.41 2331.14 2652.57 3145.70 3477.78

Transferring fuel oils or commercial gasolines in applications at temperatures as low as -40ºF (-40ºC). Hose remains flexible to -20ºF (-29ºC). For home and commercial service where a nonmarking cover is required. -20ºF to +180ºF (-29ºC to +82ºC) continuous service. NOTE: Gasoline is normally conveyed below 120ºF (49ºC). Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type C2 (Modified Nitrile). Red. Nonmarking. 26

. Reference pages 108-117.

Cut lengths: Packaged one each in a carton. Continuous ink print label. Example: “ (1.38MPa) WP Made In U.S.A.”

Wagon Master® Fuel Oil/Gasoline 1 1/4 Inch (31.8mm) 200 PSI

Special production runs require minimum order quantities of 5,000 feet. None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $10.14 10.14 10.14 10.14 11.78 11.78 11.78 11.78 13.46 13.46 13.46 13.46 14.40 14.40 14.40 14.40

Wagon Master® Assemblies

Coupled with Internal Expansion fittings Male/Female

Part No. 307716 307717 307718 307719 307720 307721 307722 307723 307724 307725 307726 307727 307728 307729 307730 307731

(mm) 203 203 203 203 254 254 254 254 254 254 254 254 305 305 305 305

Wt. Per Ft. (Lbs.) .55 .55 .55 .55 .67 .67 .67 .67 .71 .71 .71 .71 .78 .78 .78 .78

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

24B Curb Pump (Soft Wall)

Petroleum Transfer Hose

(Specification 3224) Part No. 307325 307326 307327 307328 307329

Nom. I.D. (ln.) 5/8-1 5/8-2 3/4-1 3/4-2 1-2

(mm) 16.0 16.0 19.0 19.0 25.4

Nom. O.D. (ln.) 1.00 1.04 1.14 1.19 1.46

Max. W.P (psi) 125 125 125 125 125

(mm) 25.4 26.4 29.0 30.2 37.1

(MPa) .86 .86 .86 .86 .86

Suction (ln. Hg.) (mm Hg) 20.0 508 20.0 508 20.0 508 20.0 508 10.0 254

Min. Bend Radius (ln.) 6.0 6.0 6.0 6.0 8.0

(mm) 152 152 152 152 203

Wt. Per Ft. (Lbs.) .29 .33 .35 .41 .54

(Kg) .13 .15 .15 .19 .25

Standard Pack REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X

Gates Item No. 3224-1239 3224-1237 3224-1101 3224-1230 3224-1232

List Price Per Ft. $3.72 4.55 4.38 5.91 7.86

Dispensing all types of commercial gasolines, gasohol and diesel fuels from service station pumps where lightweight an flexible hose is preferred. Also for vapor recovery systems in service stations.

RECOMMENDED FOR:

-40ºF to +120ºF (-40ºC to +49ºC) continuous service. NOTE: Above fuels are normally conveyed below 120ºF (49ºC).

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord with static conductor. Cover: Type C2 (Modified Nitrile). Black.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

5/8" One and Two Braid, 3/4" One Braid: Packaged in 800' reels. Maximum 5 lengths. No length less than 12'. 3/4" and 1" Two Braid: Packaged in 400' reels. Maximum 5 lengths. No length less than 12'.

PACKAGING:

Continuous ink print label. Example: “ Hose Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

24B Pump Master® 3/4 Inch (19.0mm) 1B

Listed Gasoline

Special production runs require minimum order quantities of 5,000 feet per size. None.

REMNANT LENGTHS:

Underwriters Laboratories Standard No. 330.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Blacksnake® Curb Pump (Hardwall)

Petroleum Transfer Hose

(Specification 3624) Part No. 307411 307412

Nom. I.D. (ln.) 5/8 3/4

(mm) 16.0 19.0

Nom. O.D. (ln.) 1.00 1.13

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING:

Max. W.P (psi) 150 150

(mm) 25.4 28.7

(MPa) 1.03 1.03

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762

Min. Bend Radius (ln.) 6.0 6.0

(mm) 152 152

Wt. Per Ft. (Lbs.) .37 .42

(Kg) .17 .19

Standard Pack REEL REEL

Stock (X) or Minimum Order Qty. X X

Gates Item No. 3624-0001 3624-0002

Dispensing all types of commercial gasolines, or other petroleum based products, from service station pumps. A heavy duty hardwall hose which does not collapse in reel use or behind the nozzle in heavy duty service. -40ºF to +120ºF (-40ºC to +49ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type J (CPE). Black. 71

. Reference pages 107-117.

Packaged 500' per reel. Maximum 5 pieces. Minimum length 12 ft. Continuous ink print label. Example: “

BLACKSNAKE® 3/4 Inch (19.0mm) 1 wire braid

Listed Gasoline Hose Made In U.S.A.” SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Special production runs require minimum order quantities of 10,000 feet per size. None. Underwriters Laboratories Standard No. 330.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $5.68 5.96

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

124HW® Curb Pump (Hard Wall)

Petroleum Transfer Hose

(Specification 4525A) Part No. 307379

Nom. I.D. (ln.) 1-1

(mm) 25.4

Nom. O.D. (ln.) 1.50

Max. W.P (psi) 125

(mm) 38.1

(MPa) .86

Suction (ln. Hg.) (mm Hg) 25.0 635

Min. Bend Radius (ln.) 5.0

(mm) 127

Wt. Per Ft. (Lbs.) .65

(Kg) .30

Standard Pack REEL

Stock (X) or Minimum Order Qty. X

Gates Item No. 4525-1397

List Price Per Ft. $8.75

Dispensing all types of commercial gasolines, gasohol and diesel fuels from service station pumps. A heavy duty hard wall hose which does not collapse in reel use or behind the nozzle in heavy duty service.

RECOMMENDED FOR:

-40ºF to +120ºF (-40ºC to +49ºC) continuous service. NOTE: Above fuels normally conveyed below 120ºF (49ºC).

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord with wire helix. Cover: Type J (CPE). Black.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

Packaged 500' per reel. Maximum 5 pieces. Minimum length 12 ft.

PACKAGING:

Continuous ink print label. Example: “ Gasoline Hose Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

124HW Pump Master® 3/4 Inch (19.0mm) 2B,

Listed

Special production runs require minimum order quantities of 5,000 feet per size. None.

REMNANT LENGTHS:

Underwriters Laboratories Standard No. 330.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Trident® 400

Petroleum Transfer Hose

(Specification 3150B) Part No. 307570 307571 307572 307573

Nom. I.D. (ln.) 2 2 1/2 3 4

(mm) 51.0 63.0 76.0 102.0

Nom. O.D. (ln.) 2.71 3.20 3.71 4.84

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P (psi) 400 400 400 400

(mm) 68.8 81.3 94.2 123.0

Suction (ln. Hg.) (mm Hg) 10.0 254 10.0 254 10.0 254 10.0 254

(MPa) 2.76 2.76 2.76 2.76

Min. Bend Radius (ln.) 16.0 20.0 24.0 32.0

(mm) 406 508 610 813

Wt. Per Ft. (Lbs.) 1.50 1.82 2.23 3.49

(Kg) .68 .83 1.01 1.58

Standard Pack 200 ft. 200 ft. 200 ft. 200 ft.

Stock (X) or Minimum Order Qty. X 400 ft. X X

Gates Item No. 3150-0410 3150-0411 3150-0412 3150-0413

Water, air and petroleum product transfer applications where a lightweight, flexible hose in long lengths is required. Note: For fuels, use a petroleum transfer hose with a Type C (Nitrile) tube. -30ºF to +158ºF (-34ºC to +70ºC) continuous service. Tube: Type A (Neoprene). Black. Reinforcement: Synthetic, high tensile textile. Cover: Type A (Neoprene). Black with blue spiral stripe for high visibility. 14

. Reference pages 107-117.

200' length coiled and wrapped in polyethylene. Continuous transfer label. Example: “ Trident® 400 Multi Service Transfer Air-Water-Petroleum 400 PSI WP Fluid/250 PSI WP Air Made In U.S.A.” Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $22.27 27.40 35.24 54.68

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Seahorse® Fuel Transfer

Petroleum Transfer Hose

(Specification 4110SS) Part No. 307670 307671 307672 307673 307674

Nom. I.D. (ln.) 2 2 1/2 3 4 5

(mm) 51.0 63.0 76.0 102.0 127.0

Nom. O.D. (ln.) 2.66 3.16 3.70 4.70 5.84

Max. W.P (psi) 300 300 300 300 300

(mm) 67.6 80.3 94.0 119.0 148.0

(MPa) 2.07 2.07 2.07 2.07 2.07

Suction (ln. Hg.) (mm Hg) 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254

Min. Bend Radius (ln.) 14.0 17.0 21.0 28.0 35.0

(mm) 356 432 533 711 889

Wt. Per Ft. (Lbs.) 1.40 1.70 2.17 2.80 4.14

(Kg) .64 .77 .98 1.27 1.88

Standard Pack 200 ft. 200 ft. 200 ft. 200 ft. 200 ft.

Stock (X) or Minimum Order Qty. X 400 ft. X X X

Gates Item No. 4110-0701 4110-0704 4110-0707 4110-0710 4110-0713

List Price Per Ft. $24.93 30.95 35.35 43.79 64.96

Offshore/onshore transfer applications involving discharge service for diesel oils and other similar petroleum products where an extremely lightweight, flexible hose with a high rated working pressure and a small minimum bend radius is required.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC) continuous service.

TEMPERATURE:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with static wire. Cover: Type A (Neoprene). Black with red spiral stripe.

CONSTRUCTION:

COUPLINGS:

all sizes.

2" and 2 1/2" only. Reference pages 107-117.

200' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ U.S.A.”

SPECIAL ORDER REQUIREMENTS:

SeaHorse® Fuel Transfer 300 PSI (2.07MPa) WP Made In

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

SeaHorse® HW (Hardwall) Fuel Suction/Discharge

Petroleum Transfer Hose

(Specification 4688SS) Part No. 307769 307770 307771 307772

Nom. I.D. (ln.) 2 3 4 6

(mm) 51.0 76.0 102.0 152.0

Nom. O.D. (ln.) 2.78 3.86 4.87 7.07

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P (psi) 300 300 300 200

(mm) 70.6 98.0 124.0 180.0

(MPa) 2.07 2.07 2.07 1.38

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 10.0 18.0 24.0 36.0

(mm) 254 457 610 914

Wt. Per Ft. (Lbs.) 1.87 3.14 4.03 7.95

(Kg) .85 1.42 1.83 3.61

Standard Pack 200 ft. 200 ft. 200 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X

Gates Item No. 4688-0584 4688-0585 4688-0587 4688-0589

Offshore/onshore or dockside applications handling gasoline, oils and other petroleum products in loading and unloading tankers and barges where a lightweight, hardwall, flexible hose in long continuous lengths is desired. -40ºF to +180ºF (-40ºC to +82ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type A (Neoprene). Black with red spiral stripe. 14

, or

. Reference pages 107-117.

All lengths coiled and wrapped in polyethylene. Continuous transfer label. Example: “ Made In U.S.A.”

SeaHorse® HW Hardwall Fuel Transfer 300 PSI (2.07MPa) WP

Special production runs require minimum order quantities of 400 feet through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $31.35 43.97 51.65 109.76

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #13 June 01, 2000

Industrial Hose Products/List Prices

GATES 3/8 Inch PowerClean3000 Max WP 3000

PowerClean™

Pressure Washer

(Specification 4657, KB, KG, KK, KY, PB, PG, PY) PowerClean 2500 (4657, 4657PB, 4657PG, 4657PY) Part No. 310200 310201 310202 310203 310204

Color Black Black Blue Gray Yellow

Nom. I.D. (ln.) 1/2 1/2 1/2 1/2 1/2

Nom. O.D. (ln.) .80 .80 .80 .80 .80

(mm) 12.7 12.7 12.7 12.7 12.7

(mm) 20.3 20.3 20.3 20.3 20.3

Max. W.P. (psi) 2500 2500 2500 2500 2500

(MPa) 17.23 17.23 17.23 17.23 17.23

Suction (ln. Hg) 30.0 30.0 30.0 30.0 30.0

Min. Bend Radius (mm Hg) (ln.) 7.0 762 7.0 762 7.0 762 7.0 762 762 7.0

(mm) 178 178 178 178 178

Wt. Per Ft. (Lbs.) .28 .28 .28 .28 .28

(Kg) .13 .13 .13 .13 .13

Stock (X) Standard or Minimum Pack Order Qty. LG. REEL 5000 ft. X REEL 5000 ft. REEL REEL 5000 ft. REEL 5000 ft.

List Gates Price Item No. Per Ft. 4657-2412 $2.64 4657-2408 2.75 4657-2413 2.89 4657-2414 2.89 4657-2415 2.89

PowerClean 3000 (4657, 4657PB, 4657PG, 4657PY) 310300 310301 310302 310303 310304 310305

Black Black Blue Blue Gray Yellow

3/8 3/8 3/8 3/8 3/8 3/8

9.5 9.5 9.5 9.5 9.5 9.5

.68 .68 .68 .68 .68 .68

17.3 17.3 17.3 17.3 17.3 17.3

3000 3000 3000 3000 3000 3000

20.67 20.67 20.67 20.67 20.67 20.67

30.0 30.0 30.0 30.0 30.0 30.0

762 762 762 762 762 762

5.0 5.0 5.0 5.0 5.0 5.0

127 127 127 127 127 127

.23 .23 .23 .23 .23 .23

.10 .10 .10 .10 .10 .10

LG. REEL REEL LG. REEL REEL REEL REEL

X X X X X X

4657-2401 $2.31 4657-2402 2.40 4657-2403 2.43 4657-2404 2.52 4657-2416 2.52 4657-2417 2.52

762 762 762 762 762

4.0 4.0 4.0 4.0 4.0

102 102 102 102 102

.15 .15 .15 .15 .15

.07 .07 .07 .07 .07

LG. REEL REEL REEL REEL REEL

5000 ft. X 5000 ft. 5000 ft. 5000 ft.

4657-2418 $1.92 4657-2400 2.00 4657-2419 2.10 4657-2420 2.10 4657-2421 2.10

762 762 762 762 762

5.0 5.0 5.0 5.0 5.0

127 127 127 127 127

.23 .23 .23 .23 .23

.10 .10 .10 .10 .10

LG. REEL REEL REEL REEL REEL

X X 5000 ft. 5000 ft. 5000 ft.

4657-2405 $2.78 4657-2225 2.89 4657-2422 3.03 4657-2423 3.03 4657-2424 3.03

PowerClean 3500 (4657, 4657PB, 4657PG, 4657PY) 310400 310401 310402 310403 310404

Black Black Blue Gray Yellow

1/4 1/4 1/4 1/4 1/4

13.5 13.5 13.5 13.5 13.5

.53 .53 .53 .53 .53

6.3 6.3 6.3 6.3 6.3

3500 3500 3500 3500 3500

24.12 24.12 24.12 24.12 24.12

30.0 30.0 30.0 30.0 30.0

PowerClean 4000 (4657KK, 4657KB, 4657KG, 4657KY) 310500 310501 310502 310503 310504

Black Black Blue Gray Yellow

3/8 3/8 3/8 3/8 3/8

17.3 17.3 17.3 17.3 17.3

.68 .68 .68 .68 .68

9.5 9.5 9.5 9.5 9.5

4000 4000 4000 4000 4000

27.58 27.58 27.58 27.58 27.58

30.0 30.0 30.0 30.0 30.0

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) Laboratory tested for normal service. Increased operating temperatures will reduce hose assembly service life.

TEMPERATURE: CONSTRUCTION:

Tube: Type C (Nitrile). Black. Specially compounded to handle high pressure water service. Reinforcement: High tensile steel one-wire braid. Cover: Type C2 (Modified Nitrile). Black, Blue, Gray, Yellow. Specially compounded to handle pressure washer environment.

COUPLINGS:

Gates permanent Power Crimp® or

MegaCrimp® couplings. Reference pages 108-117.

1/4" through 1/2": Packaged in 300' reels. Any number of pieces. All lengths in 50' increments. Minimum length 50'. 1/4" through 1/2": Packaged in 1000' large reels. Any number of pieces. All lengths in 50' increments. Minimum length 50'.

PACKAGING:

BRANDING:

Continuous ink brand. Example: “ For Steam Service Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

GATES 3/8 Inch PowerClean™ 3000 Max WP 3000 PSI Not

Special production runs require minimum order quantities of 5,000 feet per size. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #14 June 01,2000

Industrial Hose Products/List Prices

GATES 3/8 Inch PowerClean5000 Max WP 5000

PowerClean™

Pressure Washer

(Specification 4657F, XB, XG, XY) PowerClean 4000 (4657F, 4657XB, 4657XG, 4657XY) Part No. 310800 310801 310802 310803 310804

Color Black Black Blue Gray Yellow

Nom. I.D. (ln.) 1/2 1/2 1/2 1/2 1/2

(mm) 12.7 12.7 12.7 12.7 12.7

Nom. O.D. (ln.) .86 .86 .86 .86 .86

(mm) 21.8 21.8 21.8 21.8 21.8

Max. W.P. (psi) 4000 4000 4000 4000 4000

(MPa) 27.58 27.58 27.58 27.58 27.58

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0

Min. Bend Radius (ln.) (mm) 7.0 178 178 7.0 178 7.0 178 7.0 178 7.0

Wt. Per Ft. (Lbs.) .42 .42 .42 .42 .42

(Kg) .19 .19 .19 .19 .19

Stock (X) Standard or Minimum Pack Order Qty. LG. REEL 5000 ft. X REEL 5000 ft. REEL REEL 5000 ft. REEL 5000 ft.

List Gates Price Item No. Per Ft. 4657-2425 $3.68 4657-2426 3.83 4657-2409 4.02 4657-2427 4.02 4657-2428 4.02

PowerClean 5000 (4657F, 4657XB, 4657XG, 4657XY) 310900 310901 310902 310903 310904

Black Black Blue Gray Yellow

3/8 3/8 3/8 3/8 3/8

9.5 9.5 9.5 9.5 9.5

.74 .74 .74 .74 .74

18.8 18.8 18.8 18.8 18.8

5000 5000 5000 5000 5000

34.47 34.47 34.47 34.47 34.47

30.0 30.0 30.0 30.0 30.0

762 762 762 762 762

5.0 5.0 5.0 5.0 5.0

127 127 127 127 127

.35 .35 .35 .35 .35

.16 .16 .16 .16 .16

LG. REEL REEL REEL REEL REEL

X X 5000 ft. 5000 ft. 5000 ft.

4657-2406 $3.25 4657-2407 3.38 4657-2429 3.55 4657-2430 3.55 4657-2431 3.55

.59

15.0

6000

41.37

30.0

762

4.0

102

.25

.11

REEL

4657-2410 $2.74

PowerClean 6000 (4657F) 310950

Black

1/4

6.3

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Heavy duty use on hot and cold water high pressure cleaning equipment where heavy duty service is required. Flexible. Use Bend Restrictors to extend service life. NOTE: Not recommended for steam service. -40ºF to +212ºF (-40ºC to +100ºC) Laboratory tested for normal service. Increased operating temperatures will reduce hose assembly service life. Tube: Type C (Nitrile). Black. Specially compounded to handle high pressure water service. Reinforcement: High tensile steel two-wire braid. Cover: Type C2 (Modified Nitrile). Black, Blue, Gray, Yellow. Specially compounded to handle pressure washer environment. 72

Gates permanent Power Crimp® or

MegaCrimp® couplings. Reference pages 108-117.

1/4" through 1/2": Packaged in 300' reels. Any number of pieces. All lengths in 50' increments. Minimum length 50'. 3/8" and 1/2": Packaged in 1000' large reels. Any number of pieces. All lengths in 50' increments. Minimum length 50'. Continuous ink brand. Example: “ For Steam Service Made In U.S.A.”

GATES 3/8 Inch PowerClean™ 5000 Max WP 5000 PSI Not

Special production runs require minimum order quantities of 5,000 feet per size. None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #24 December, 2001

Industrial Hose Products/List Prices

Thermo AG® 570

Special Application Hose

Ag Spray

(Specification 4465) Part No. 302360 302361 302362 302363 302364 302365

Nom. I.D. (ln.) 3/8 3/8 1/2 1/2 3/4 3/4

(mm) 9.5 9.5 12.7 12.7 19.0 19.0

Nom. O.D. (ln.) .67 .67 .81 .81 1.08 1.08

(mm) 17.0 17.0 20.6 20.6 27.4 27.4

Max. W.P.* (psi) 570 570 570 570 570 570

(MPa) 3.93 3.93 3.93 3.93 3.93 3.93

Suction* (ln. Hg) (mm Hg) 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 25.0 635

Min. Bend Radius (ln.) 4.0 4.0 5.0 5.0 6.0 6.0

(mm) 102 102 127 127 152 152

Wt. Per Ft. (Lbs.) .12 .12 .17 .17 .27 .27

(Kg) .05 .05 .08 .08 .12 .12

Standard Pack 300 ft. 400 ft. 300 ft. 400 ft 300 ft. 400 ft.

Stock (X) or Minimum Order Qty. X X X X X X

Gates Item No. 4465-1701 4465-1702 4465-1704 4465-1705 4465-1706 4465-1707

List Price Per Ft. $2.13 2.13 2.49 2.49 4.73 4.73

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR:

TEMPERATURE:

-10ºF to +130ºF (-23ºC to +55ºC). Maximum temperature dependent on pesticide/herbicide or chemicals conveyed. For temperatures above 120ºF (49ºC), contact Denver Product Application (303) 744-5070.

CONSTRUCTION:

Tube: Type G (PVC). Yellow. Reinforcement: Synthetic, high tensile textile cord. Cover: Type G (PVC). Yellow. Striated.

COUPLINGS:

8 , 14 or 15 , 21 (multiple clamps required) or Reference pages 108-117.

Gates permanent Power Crimp® couplings.

All lengths coiled in a polyethylene bag.

PACKAGING:

Continuous ink brand. Example: “3/8" 570 PSI WP SPRAY HOSE JAPAN”

BRANDING: SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes Supplement #25 December, 2001

Industrial Hose Products/List Prices

Thermo AG® 800

Special Application Hose

Ag Spray

(Specification 4465) Part No. 302415 302416 302417 302418 302419 302420

Nom. I.D. (ln.) 3/8 3/8 1/2 1/2 3/4 3/4

(mm) 9.5 9.5 12.7 12.7 19.0 19.0

Nom. O.D. (ln.) .69 .69 .84 .84 1.41 1.41

(mm) 17.5 17.5 21.3 21.3 29.0 29.0

Max. W.P.* (psi) 800 800 800 800 800 800

(MPa) 5.52 5.52 5.52 5.52 5.52 5.52

Suction* (ln. Hg) (mm Hg) 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 25.0 635

Min. Bend Radius (ln.) 4.0 4.0 5.0 5.0 6.0 6.0

(mm) 102 102 127 127 152 152

Wt. Per Ft. (Lbs.) .14 .14 .18 .18 .30 .30

(Kg) .06 .06 .08 .08 .14 .14

Standard Pack 300 ft. 400 ft. 300 ft. 400 ft. 300 ft. 400 ft.

Stock (X) or Minimum Order Qty. X X X X X X

Gates Item No. 4465-1361 4465-1362 4465-1371 4465-1372 4465-1381 4465-1382

List Price Per Ft. $2.46 2.46 3.13 3.13 5.64 5.64

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE:

CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING:

Spraying lawns, trees and similar applications with diluted solutions of water and oil based pesticides and herbicides. For pesticides or herbicides containing more than 2% Toluene or Xylene, use Gates 77B. -10ºF to +130ºF (-23ºC to +55ºC). Maximum temperature dependent on pesticide/herbicide or chemicals conveyed. For temperatures above 120ºF (49ºC), contact Denver Product Application (303) 744-5070. Tube: Type G (PVC). Green. Reinforcement: Synthetic, high tensile textile cord. Cover: Type G (PVC). Green. Striated. 8 , 14 or 15 , 21 (multiple clamps required) or Reference pages 108-117.

Gates permanent Power Crimp® couplings.

All lengths coiled in a polyethylene bag. Continuous ink brand. Example: “1/2" 800 PSI WP SPRAY HOSE JAPAN”

SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

33HB

Special Application Hose

Divers' Air

(Specification 3333) Part No. 302501 302502 302503 302504 302505 302506 302507 302508 302509 302510 302511 302512 302513 302514 302515 302516 302517

Nom. I.D. (ln.) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

(mm) 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7

Nom. O.D. (ln.) .75 .75 .75 .75 .75 .75 .75 .75 .94 .94 .94 .94 .94 .94 .94 .94 .94

(mm) 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.9 23.9

Max. W.P. (psi) 1125 1125 1125 1125 1125 1125 1125 1125 1000 1000 1000 1000 1000 1000 1000 1000 1000

(MPa) 7.76 7.76 7.76 7.76 7.76 7.76 7.76 7.76 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90 6.90

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 30.0 762 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 30.0 762 30.0 762

Min. Bend Radius (ln.) 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

(mm) 102 102 102 102 102 102 102 102 127 127 127 127 127 127 127 127 127

Wt. Per Ft. (Lbs.) .19 .19 .19 .19 .19 .19 .19 .19 .29 .29 .29 .29 .29 .29 .29 .29 .29

(Kg) .09 .09 .09 .09 .09 .09 .09 .09 .13 .13 .13 .13 .13 .13 .13 .13 .13

Stock (X) Standard or Minimum Pack Order Qty. 300-399 ft. *** *** 400-499 ft. *** 500-599 ft. 600-699 ft. *** *** 700-799 ft *** 800-899 ft. 900-999 ft. *** 1000-PLUS ft. X *** 50-299 ft. *** 300-399 ft. *** 400-499 ft. *** 500-599 ft. *** 600-699 ft. *** 700-799 ft. *** 800-899 ft. 900-999 ft. *** 1000-PLUS ft. X

Gates Item No. 3333-0012 3333-0013 3333-0014 3333-0015 3333-0005 3333-0006 3333-0009 3333-0017 3333-0038 3333-0030 3333-0031 3333-0032 3333-0033 3333-0040 3333-0041 3333-0043 3333-0035

List Price Per Ft. $5.07 5.41 5.76 6.10 6.45 6.77 7.11 7.46 3.95 6.91 7.31 7.80 8.27 8.75 9.21 9.68 10.22

Handling mixtures of oxygen, helium and nitrogen gases customarily used in diving applications as air breathing hose. The kink resistant hose is designed for extra long wear under normal operating use.

RECOMMENDED FOR:

-40ºF to +120ºF (-40ºC to +49ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type C (Nitrile). Black. Reinforcement: Braided, high tensile synthetic textile cord. Cover: Type A (Neoprene). Black. All sizes are perforated.

COUPLINGS:

Corrosion resistant couplings supplied and applied by diving contractors.

PACKAGING:

300' and longer lengths: One continuous length on a reel.

BRANDING:

Continuous ink print label. Example: “

SPECIAL ORDER REQUIREMENTS:

33HB Divers' Air 3/8 Inch (9.5mm) Made In U.S.A.”

***Contact Denver Industrial Hose Marketing for special orders. Lengths less than 1,000 feet are only stocked on an "as available" basis, as by-products of producing 1,000' lengths. Special production runs require minimum order quantities of 10,000 feet per size. Special production runs for SPECIFIC LENGTHS require minimum order quantities of 10,000 feet per size and a 35% (x 1.35) premium to the above prices. None.

REMNANT LENGTHS: STANDARDS:

Meets MIL-H-2815G Section 3.12.2 off-gassing for air breathing applications, especially diving.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

4219G

Special Application Hose

Fuel Line & Tank Vent (Specification 4219G)

Part No. 302755 302750 302751 302752 302753 302754

Nom. I.D. (ln.) 3/16 1/4 5/16 3/8 1/2 5/8

(mm) 4.8 6.3 8.0 9.5 12.7 16.0

Nom. O.D. (ln.) .41 .50 .56 .62 .78 .94

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

(mm) 10.4 12.7 14.2 15.7 19.8 23.9

Max. W.P. (psi) 50 50 50 50 35 35

(MPa) .34 .34 .34 .34 .24 .24

Suction (ln. Hg) (mm Hg) 610 24.0 610 24.0 610 24.0 610 24.0 254 10.0 254 10.0

Min. Bend Radius (ln.) 3.0 3.0 3.0 4.0 5.0 6.0

(mm) 76 76 76 102 127 152

Wt. Per Ft. (Lbs.) .06 .09 .10 .12 .17 .24

(Kg) .03 .04 .05 .05 .08 .11

Standard Pack REEL REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. 10,000 ft. X X X X X

Gates Item No. 4219-0093 4219-0103 4219-0107 4219-0109 4219-0102 4219-0097

Fuel line applications to provide flexible connections between rigid fuel distribution lines and the engine. Also for use in evaporative emission control systems and as a vent line. -40ºF to +257ºF (-40ºC to +125ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: High tensile synthetic textile cord. Cover: Type C2 (NBR/PVC). Black. Packaged in 450' to 650' Reels. Maximum 5 pieces. One piece 25' to 49'. All other pieces 49' and over. Continuous ink label. Example: “

4219G Fuel Line 3/8 Inch (9.5mm) SAE 30R7 Made In U.S.A.”

Special production runs require minimum order quantities of 10,000 feet through 3/8" and 5,000 feet for 1/2" and over. None. Exceeds requirements of SAE 30R6 & SAE 30R7.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $1.08 1.21 1.31 1.39 1.90 2.60

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

4663K

Special Application Hose

Fuel Tank Filler (Specification 4663K)

Part No. 302850 302851 302858 302852 302853 302854 302855 302856 302857

Nom. I.D. (ln.) 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/4 2 1/2 3

(mm) 34.9 38.0 41.0 44.0 48.0 51.0 57.0 63.0 76.0

Nom. O.D. (ln.) 1.64 1.77 1.90 2.02 2.14 2.27 2.52 2.77 3.27

(mm) 41.7 45.0 48.3 51.3 54.4 57.7 64.0 70.4 83.1

Max. W.P. (psi) 20 20 20 20 20 20 20 20 20

(MPa) .14 .14 .14 .14 .14 .14 .14 .14 .14

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 30.0 762

Min. Bend Radius (ln.) 5.0 5.0 5.5 6.0 6.0 7.0 8.0 10.0 12.0

(mm) 127 127 140 152 152 178 203 254 305

Wt. Per Ft. (Lbs.) .39 .41 .44 .47 .50 .53 .59 .65 .84

(Kg) .18 .19 .20 .21 .23 .24 .27 .30 .38

Standard Pack 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft.

Stock (X) or Minimum Order Qty. X X 200 ft. 200 ft. 200 ft. X X 200 ft. 200 ft.

Gates Item No. 4663-2828 4663-2830 4663-3624 4663-3976 4663-2933 4663-2930 4663-2932 4663-2929 4663-3625

List Price Per Ft. $16.01 16.35 16.83 17.45 18.00 18.52 20.02 21.09 23.75

Fuel tank filler applications to provide a flexible connector between fuel tank and fill pipe. Suitable for fill applications on automobiles, trucks, buses and other similar applications where exceptionally flexible hose is required.

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Reinforced ply impregnated with rubber. Black. 10' per carton.

PACKAGING: BRANDING:

Continuous transfer label. Example: “

SPECIAL ORDER REQUIREMENTS:

4663K Fuel Fill Hose Made In U.S.A.”

Special production runs require minimum order quantities of 200 feet. Maximum length is 10 feet. None.

REMNANT LENGTHS:

Meets requirements of SAE 30R5. Tube: RMA (Class B) Medium oil resistance. Cover: RMA (Class C) Limited oil resistance.

STANDARDS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

4684CF

Special Application Hose

Wet Exhaust (Marine) (Specification 4684CF)

Part No. 303000 303001 303002 303003 303004 303005 303006 303007 303008 303009 303010 303011 303012 303013 303014 303015 303016 303017 303018 303821 303019 303020

Nom. I.D. (ln.) 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 3 1/2 4 4 1/2 5 6

(mm) 25.4 28.6 31.8 34.9 38.0 41.0 44.0 48.0 51.0 54.0 57.0 60.0 63.0 67.0 70.0 73.0 76.0 89.0 102.0 114.0 127.0 152.0

Nom. O.D. (ln.) 1.47 1.60 1.72 1.85 1.97 2.10 2.22 2.34 2.47 2.60 2.72 2.85 2.97 3.10 3.22 3.35 3.47 3.97 4.47 4.97 5.47 6.47

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

HOSE ENDS: PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS: STANDARDS:

(mm) 37.3 40.6 43.7 47.0 50.0 53.3 56.4 59.4 62.7 66.0 69.1 72.4 75.4 78.7 81.8 85.1 88.1 101.0 114.0 126.0 139.0 164.0

Max. W.P. (psi) 100 100 100 85 85 75 75 60 60 55 55 50 50 40 40 40 40 35 30 25 15 15

(MPa)) .69 .69 .69 .59 .59 .52 .52 .41 .41 .38 .38 .34 .34 .28 .28 .28 .28 .24 .21 .17 .10 .10

Suction (ln. Hg) (mm Hg) 635 25.0 635 25.0 635 25.0 635 25.0 508 20.0 508 20.0 508 20.0 508 20.0 20.0 508 508 20.0 508 20.0 508 20.0 508 20.0 381 15.0 381 15.0 381 15.0 381 15.0 381 15.0 254 10.0 127 5.0 127 5.0 5.0 127

Min. Bend Radius (ln.) 3.0 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 6.0 6.0 7.0 7.0 9.0 10.0 11.0 12.0 17.0 24.0 27.0 30.0 36.0

Wt. Per Ft. (Lbs.) .51 .56 .61 .66 .70 .75 .80 .83 .88 .93 .98 1.03 1.08 1.12 1.17 1.21 1.26 1.45 1.64 1.84 2.03 2.42

(mm) 76 102 102 102 102 127 127 127 127 152 152 178 178 229 254 279 305 432 610 686 762 914

(Kg) .23 .25 .28 .30 .32 .34 .36 .38 .40 .42 .45 .47 .49 .51 .53 .55 .57 .66 .74 .84 .92 1.10

Standard Pack 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft. 10 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X X X X X X X X X X X X 200 ft. 200 ft. 200 ft.

Gates Item No. 4684-1540 4684-1545 4684-1551 4684-1556 4684-1561 4684-1601 4684-1611 4684-1651 4684-1660 4684-1670 4684-1680 4684-1690 4684-1700 4684-1711 4684-1720 4684-1730 4684-1740 4684-1750 4684-1760 4684-1764 4684-1766 4684-1722

Marine wet exhaust applications. -40ºF to +212ºF (-40ºC to +100ºC) continuous service. Tube: Type C (Nitrile). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type A (Neoprene). Black. Plain End. Straight or Enlarged Ends on special order. 1", 1 1/4", 1 3/8", 1 1/2", 1 5/8", 1 7/8": Packaged 50' coiled in a carton. 4 1/2" through 6": Packaged in straight lengths in woven fiber. All other sizes: Packaged 10' per carton. Continuous transfer label every 10 ft. Example: “ Made In U.S.A.”

4684CF Engine Coolant-Marine Wet Exhaust 2 Inch

Special production runs require minimum order quantities of 200 feet per size. Lengths can be as short as one foot, but minimum billing is for ten feet. For enlarged or straight ends, contact Denver Industrial Hose Marketing for pricing. None. Meets requirements of SAE J20R2 , SAE J20R5, SAE J2006 and USCG. Tube: RMA (Class B) Medium oil resistance. Cover: RMA (Class C) Limited oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $13.20 14.29 15.07 15.50 15.81 16.01 16.94 17.93 18.71 19.40 20.40 21.94 22.56 22.86 23.05 23.83 24.38 27.63 29.16 31.75 34.34 39.51

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

77B

Special Application Hose

Paint Spray and Chemical (Specification 3207NN/3207T)

Part No. 303325 303326 303327 303328 303329

Nom. I.D. (ln.) 1/4 5/16 3/8 1/2 3/4

(mm) 6.3 8.0 9.5 12.7 19.0

Nom. O.D. (ln.) .52 .59 .67 .87 1.16

Max. W.P. (psi) 500 500 500 750 750

(mm) 13.2 15.0 17.0 22.1 29.5

(MPa) 3.45 3.45 3.45 5.17 5.17

Suction (ln. Hg) (mm Hg) 762 30.0 762 30.0 762 30.0 25.0 635 25.0 635

Min. Bend Radius (ln.) 3.0 3.0 3.0 5.0 6.0

(mm) 76 76 76 127 152

Wt. Per Ft. (Lbs.) .09 .11 .14 .23 .35

(Kg) .04 .05 .06 .10 .16

Standard Pack REEL REEL REEL REEL REEL

Stock (X) or Minimum Order Qty. X X X X X

Gates Item No. 3207-0290 3207-0291 3207-0292 3207-0294 3207-0296

List Price Per Ft. $2.49 2.93 3.41 4.98 7.67

Paint spray applications, as well as transfer of petroleum based products (aliphatic, aromatic and chlorinated hydrocarbon; such as Toluene, Xylene, Benzene, gasoline and Carbon Tetrachloride). Reference Gates Chemical Resistance Table on page 139. NOT RECOMMENDED FOR ACIDS.

RECOMMENDED FOR:

TEMPERATURE:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service. NOTE: Contact Denver Product Application (303) 744-5070 when conveying chemicals above 120ºF (49ºC).

CONSTRUCTION:

Tube: Type Z (Special flexible nylon material). Tan. Reinforcement: Synthetic, high tensile textile cord. Cover: Type A (Neoprene). Black.

COUPLINGS:

. Reference pages 108-117. For paint service: Binks 3 piece compression ring only.

1/4" through 1/2": Packaged in 600' to 800' reels. Maximum 4 pieces. One length 25' to 50'. Maximum of 2 lengths under 100'. 3/4": Packaged in 300' to 400' reels. Maximum 3 pieces. One length between 25' to 50'. All other lengths over 50'. Maximum 2 pieces under 100'.

PACKAGING:

BRANDING:

Continuous ink print label. Example: “ PSI (3.45MPa) WP Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

77B PAINT SPRAY AND CHEMICAL 3/8 Inch (9.5mm) 500

Special production runs require minimum order quantities of 5,000 feet for all sizes except 3/8". 3/8" requires 25,000 feet or multiple thereof. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Ohmega®

Special Application Hose

Pot Room

(Specification 3237A) Part No. 303351 303352

Nom. I.D. (ln.) 3/8 1/2

(mm) 9.5 12.7

Nom. O.D. (ln.) .75 .88

Max. W.P. (psi) 300 300

(mm) 19.1 22.4

(MPa) 2.07 2.07

Suction (ln. Hg) (mm Hg) 30.0 762 25.0 635

Min. Bend Radius (ln.) 3.0 5.0

(mm) 76 127

Wt. Per Ft. (Lbs.) .19 .24

(Kg) .09 .11

Standard Pack REEL REEL

Stock (X) or Minimum Order Qty. 25,000 ft. 25,000 ft.

Gates Item No. 3237-0704 3237-0705

List Price Per Ft. $2.56 3.04

NOTE: For additional sizes see Premo Flex® page 45.

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

Medium duty air and water applications where a hose with high electrical resistance is needed. -20ºF to +150ºF (-29ºC to +66ºC) continuous service. Tube: Type P (EPDM). Green. Reinforcement: High tensile synthetic textile cord. Cover: Type P (EPDM). Red. 19

(For 3/8" only),

. Reference pages 108-117.

3/8" and 1/2": Packaged in 500' to 750' reels. Maximum 3 pieces. Minimum length 50'. Continuous ink print label. Example: “ Ohmega® Air and Water 3/8 Inch (9.5mm) 300 PSI (2.07MPa) WP Nonconductive @ 1000 V DC — (1 Megohm/In.) Made In U.S.A.” Special production runs require minimum order quantities of 25,000 feet per size. None. Nonconductive @ 1000 Volts DC. Meets electrical resistance of one megohm per inch when subjected to 1000 Volts DC. Storage and use may adversely affect electrical properties.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Steam and Its Effect on Hose Water can exist in three different basic states — solid, liquid or gas — and there are three different conditions of the gas (steam). Which particular condition exists is dictated by the pressure and temperature existing.

These conditions are: Wet Saturated Steam, or “Wet Steam” Dry Saturated Steam Superheated Steam, or “Dry Steam”

By way of explanation, refer to the steam chart. The heavy black line is the boiling point of water at various gauge pressures. Any point on this line represents saturated steam. Saturated steam may be completely free of unvaporized water particles, or it may carry such particles. In other words, saturated steam may be “Dry” or “Wet.” Any point below the line represents Hot Water — any point above the line represents Superheated Steam.

The dotted line shows the process of saturated steam being transformed into superheated steam. If a steam line is at a pressure of 150 psi, and a temperature of 366ºF., it contains saturated steam. If the pressure is substantially reduced by the expansion of the steam (such as the sudden opening of a valve or the steam passing into a larger pipe or hose), the condition of the steam follows the dotted line to some point X in the superheated steam area. This condition may not last very long, but the superheated steam tends to deteriorate the tube stock in ordinary steam hose intended for use with saturated steam. This usually results in hose failure.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

How to Select The Correct Steam Hose Assembly 1.

Determine Required Hose Size The hose size required is usually fixed by size of fittings or pipe to which the hose is to be connected. It is important that you do not select a hose inside diameter larger than the diameter of the preceding pipe.

STEAM HOSE TABLE Recommended Service

Find Actual Rated Working Pressure and Temperature Take pressure and temperature readings just ahead of the hose connection. Determine Condition of Steam (Saturated or Superheated) Locate the actual Rated Working Pressure and Temperature on the steam chart on previous page. Any point on the heavy line is saturated steam.

Select the Correct Hose From the table at right, select the hose that fulfills the requirements of both the condition of the steam and the Rated Working Pressure.

Determine Length Required Length required is almost always dictated by the application.

Select Couplings Required Gates recommends only interlocking types* of couplings for steam hose applications. These are identified as: 14

Interlocking, ground joint.

Interlocking, washer joint.

Hose Type

Rated Working Pressure (psi)

Working Temperature (°F)

319MB

100

338

232MB ® Steam Queen

250

450

205MB ® Steam King

250

450

Type of Steam Saturated Only Saturated or Superheated Saturated or Superheated

Properties of Saturated Steam th (Abridged from Handbook of Chemistry and Physics – 39 Edition.) Gauge Gauge *Temperature of *Temperature of Pressure Saturated Steam Pressure Saturated Steam (psi) (ºF) (psi) (ºF) 10 239 110 344 25 115 267 347 30 274 120 350 35 281 125 353 40 130 287 356 45 292 135 358 50 140 298 361 55 303 145 363 60 307 150 366 65 155 312 368 70 316 160 371 75 165 320 373 80 324 170 375 85 328 175 377 90 180 331 380 95 185 335 382 100 190 338 384 105 341 195 386 *Based on an atmosphere pressure of 14.7 psi.

Gauge Pressure (psi) 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275

*Temperature of Saturated Steam (ºF) 388 390 392 394 395 397 399 401 403 404 406 408 409 411 413 414

*Remember to retighten on a regular basis. IMPORTANT: Steam can be dangerous material. Play it safe – stay within the limits of published recommendations!

NOTE: When electrical continuity is required, ground wire braid of hose to couplings with aluminum, copper or stainless steel staples.

Do Not Alternate Use Between Steam and Water

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #27 October, 2001

Industrial Hose Products/List Prices

205MB

Steam Hose

Steam King

(Specification 3605/3605SR) Part No. 303391 303402 303392 303393 303394 303395 303396 303397 303398 303399 303416 303411 303413 303415

Nom. I.D. (ln.) 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 1 1 1 1 1/4 1 1/2 2

Nom. O.D. (mm) 9.5 9.5 12.7 12.7 12.7 19.0 19.0 19.0 25.4 25.4 25.4 31.8 38.0 51.0

Max. W.P*

(ln.) .78 .78 1.06 1.06 1.06 1.28 1.28 1.28 1.63 1.63 1.63 1.92 2.14 2.66

(mm) 19.8 19.8 26.9 26.9 26.9 32.5 32.5 32.5 41.4 41.4 41.4 48.8 54.4 67.6

(psi) 250 250 250 250 250 250 250 250 250 250 250 250 250 250

Suction* (MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72

(ln. Hg.) (mm Hg) — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Min. Bend Radius (ln.) — — — — — — — — — — — — — —

Wt. Per Ft. (mm) — — — — — — — — — — — — — —

(Lbs.) .26 .26 .40 .40 .40 .49 .49 .49 .78 .78 .78 1.04 1.22 1.63

(Kg) .12 .12 .18 .18 .18 .22 .22 .22 .35 .35 .35 .47 .55 .74

Standard

Stock (X) or Minimum

Gates

List Price

Pack 50 ft. REEL 50 ft. REEL 50 ft.-BP** 50 ft. REEL 50 ft.-BP** 50 ft. REEL 50 ft.-BP** 50 ft. 50 ft. 50 ft.

Order Qty. 250 ft. (X) X 200 ft. (X) X 1500 ft. (X) 150 ft. (X) X 1000 ft. (X) 100 ft. (X) X 600 ft.(X) X X X

Item No. 3605-0650 3605-0652 3605-0655 3605-0672 3605-0677 3605-0664 3605-0678 3605-0679 3605-0665 3605-0668 3605-0669 3605-0671 3605-0676 3605-0681

Per Ft. $5.28 5.28 6.43 6.43 6.10 7.48 7.48 7.11 10.85 10.85 10.34 15.61 19.68 23.54

*Working pressure and suction at +72ºF (+22ºC).

All types of steam — saturated and superheated — up to 250 PSI and +450ºF (+232ºC). NOTE: DO NOT ALTERNATE USE BETWEEN STEAM AND WATER.

RECOMMENDED FOR:

-40ºF to +450ºF (-40ºC to +232ºC) continuous service.

TEMPERATURE: CONSTRUCTION:

Tube: Type P2 (EPDM). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type P2 (EPDM). Black. All sizes are perforated.

COUPLINGS:

PACKAGING:

3/8":

only. Reference pages 108-117.

Packaged in 200' to 300' reels. Maximum of 3 pieces. Minimum length 25'. One length under 100'. 1/2", 3/4" and 1": Packaged in 500' reels. Maximum of 3 pieces. All lengths in 50 ft. increments. 3/8" x 50': Packaged 250' per carton, each length coiled and tied. 1/2" x 50': Packaged 200' per carton, each length coiled and tied. 3/4" x 50': Packaged 150' per carton, each length coiled and tied. 1" x 50': Packaged 100' per carton, each length coiled and tied. 1 1/4" x 50': Packaged 50' per carton, each length coiled and tied. 1 1/2" x 50': Packaged 50' per carton, each length coiled and tied. 2" x 50': Packaged 50' per carton, each length coiled and tied. **BP=Bulk Pack, 50' coiled and tied in a pallet carton: 1/2"=1,500'; 3/4"=1,000'; 1"=600'.

BRANDING:

Continuous molded brand. Example: “ 205MB Steam King® 3/4 Inch 2 Wire Braid 250 PSI WP at 450 Degrees F Made In U.S.A. Caution: Tighten Clamps Before Using.”

SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 5,000 feet for sizes less than 1 1/2" and 500 feet for 1 1/2" and larger. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

232MB

Steam Hose

Steam Queen

(Specification 3602E) Part

Nom. I.D.

Nom. O.D.

No. 303450 303451 303452 303454 303456 303457 303458 303462 303464

(ln.) 3/8-1 3/8-1 1/2-1 1/2-1 3/4-2 3/4-2 1-2 1 1/2-2 2-2

(mm) 9.5 9.5 12.7 12.7 19.0 19.0 25.4 38.0 51.0

(ln.) .80 .80 1.02 1.02 1.27 1.27 1.52 2.18 2.66

Max. W.P* (mm) 20.3 20.3 25.9 25.9 32.3 32.3 38.6 55.4 67.6

(psi) 250 250 250 250 250 250 250 250 250

Suction* (MPa) 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72 1.72

(ln. Hg.) (mm Hg) 762 30.0 762 30.0 635 25.0 25.0 635 20.0 508 508 20.0 508 20.0 254 10.0 254 10.0

Min. Bend Radius (ln.) 4.0 4.0 7.0 7.0 9.0 9.0 11.0 20.0 25.0

Wt. Per Ft. (mm) 102 102 178 178 229 229 279 508 635

(Lbs.) .30 .30 .45 .45 .60 .60 .73 1.24 1.64

(Kg) .14 .14 .20 .20 .27 .27 .33 .56 .75

Standard

Stock (X) or Minimum

Gates

List Price

Pack 50 ft. REEL 50 ft. REEL 50 ft. REEL 50 ft. 50 ft. 50 ft.

Order Qty. X X X X X X X X X

Item No. 3602-1051 3602-1061 3602-1052 3602-1062 3602-1055 3602-1065 3602-1057 3602-1059 3602-1060

Per Ft. $5.49 5.49 6.87 6.87 8.86 8.86 11.27 22.20 26.79

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS: STANDARDS:

All types of steam — saturated and superheated — up to 250 PSI + 450ºF (+232ºC). NOTE: DO NOT ALTERNATE USE BETWEEN STEAM AND WATER. -40ºF to +450ºF (-40ºC to +232ºC) continuous service. Tube: Type P2 (EPDM). Black. Reinforcement: Braided, high tensile steel wire. Cover: Type B1 (special compound designed to withstand heat and oil). Red. All sizes are perforated. 14

only. Reference pages 108-117.

50' lengths: Coiled in a carton. Reels: Packaged in 200' to 300' reels. Maximum of 3 pieces. Minimum length 25'. One length under 100'. Continuous molded brand. Example: “ 232MB Steam Queen® 3/4 Inch 2 Wire Braid 250 PSI WP at 450 Degrees F Made In U.S.A. Caution: Tighten Clamps Before Using.” Special production runs require minimum order quantities of 5,000 feet for sizes less than 1 1/2" and 500 feet for 1 1/2" and larger. None. Cover: RMA (Class C) Limited oil resistance.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Steelhead®

Water Hose

(Specification 3135SP) Part No. 321001 321002 321003 321004 321005 321006 321007 321008 321009 321010

Nom. I.D. (ln.) 1 1/2 1 5/8 1 7/8 2 2 1/2 3 3 1/2 4 4 1/2 6

(mm) 38.0 41.0 48.0 51.0 63.0 76.0 89.0 102.0 114.0 152.0

Nom. O.D. (ln.) 1.98 2.10 2.35 2.48 2.99 3.49 3.99 4.49 5.01 6.51

Max. W.P (psi) 150 150 150 150 150 150 150 150 150 150

(mm) 50.3 53.3 59.7 63.0 75.9 88.6 101.0 114.0 127.0 165.0

Suction (ln. Hg.) (mm Hg) — — — — — — — — — — — — — — — — — — — —

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Min. Bend Radius (ln.) 12.0 15.0 15.0 20.0 25.0 36.0 42.0 48.0 54.0 72.0

(mm) 305 381 381 508 635 914 1067 1219 1372 1829

RECOMMENDED FOR:

Water discharge in heavy duty industrial applications.

TEMPERATURE:

-40ºF to +150ºF (-40ºC to +66ºC) continuous service.

Wt. Per Ft. (Lbs.) .70 .75 .88 .93 1.14 1.35 1.64 1.85 2.16 2.84

(Kg) .32 .34 .40 .42 .52 .61 .75 .84 .98 1.29

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft. 400 ft.

Gates Item No. 3135-2651 3135-2652 3135-2653 3135-2654 3135-2655 3135-2656 3135-2657 3135-2658 3135-2659 3135-2660

List Price Per Ft. $11.08 11.55 12.53 13.21 16.50 20.62 21.18 28.81 30.25 54.45

Tube: Type D (SBR). Black. Reinforcement: Multiple plies of synthetic, high tensile textile. Cover: Type D (SBR). Black with green spiral stripe.

CONSTRUCTION:

COUPLINGS:

. Reference pages 108-117.

100' coiled and wrapped in polyethylene.

PACKAGING:

Continuous transfer label. Example: “ Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Steelhead® HD Water Discharge 150 PSI (1.03MPa) WP

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Marlin®

Water Hose

(Specification 3137M) Part No. 320010 320011 320012 320013 320014 320015 320016 320017 320018 320019 320020 320021 320022 320023

Nom. I.D. (ln.) 1 1/2 1 1/2 2 2 2 1/2 2 1/2 3 3 3 1/2 4 4 5 6 6

(mm) 38.0 38.0 51.0 51.0 63.0 63.0 76.0 76.0 89.0 102.0 102.0 127.0 152.0 152.0

Nom. O.D. (ln.) 1.82 1.90 2.33 2.41 2.83 2.91 3.33 3.41 3.91 4.33 4.41 5.44 6.40 6.49

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS:

Max. W.P (psi) 150 150 150 150 150 150 150 150 150 150 150 150 150 150

(mm) 46.2 48.3 59.2 61.2 71.9 73.9 84.6 86.6 99.3 110.0 112.0 138.0 163.0 165.0

Suction (ln. Hg.) (mm Hg) — — — — — — — — — — — — — — — — — — — — — — — — — — — —

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Min. Bend Radius (ln.) 12.0 12.0 20.0 20.0 25.0 25.0 36.0 36.0 42.0 48.0 48.0 60.0 72.0 72.0

(mm) 305 305 508 508 635 635 914 914 1067 1219 1219 1524 1829 1829

Wt. Per Ft. (Lbs.) .47 .63 .65 .84 .80 1.02 .95 1.21 1.47 1.32 1.67 2.17 2.32 2.96

(Kg) .21 .29 .30 .38 .36 .46 .43 .55 .67 .60 .76 .98 1.05 1.34

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X 400 ft. X X X X X X X X X

Gates Item No. 3137-0370 3137-0371 3137-0372 3137-0373 3137-0374 3137-0375 3137-0376 3137-0377 3137-0378 3137-0379 3137-0380 3137-0381 3137-0382 3137-0383

Water discharge in heavy duty service requiring a compact, rugged and lightweight hose. -40ºF to +180ºF (-40ºC to +82ºC) continuous service. Tube: Type P (EPDM). Black. Reinforcement: Multiple plies of synthetic, high tensile textile. Cover: Type D (SBR). Black with green spiral stripe. 1

. Reference pages 108-117.

100' coiled and wrapped in polyethylene. Continuous transfer label. Example: “ In U.S.A.”

Marlin® Water Discharge 150 PSI (1.03MPa) WP Made

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $6.54 8.74 7.20 9.72 10.14 13.98 10.17 16.22 20.50 12.81 24.12 29.82 35.57 49.79

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Dolphin®

Water Hose

(Specification 3137T) Part No. 301490 301491 301492 301493 301494 301495 301496

Nom. I.D. (ln.) 1 1/4 1 1/2 2 2 1/2 3 4 6

(mm) 31.8 38.0 51.0 63.0 76.0 102.0 152.0

Nom. O.D. (ln.) 1.53 1.78 2.32 2.82 3.36 4.36 6.38

(mm) 38.9 45.2 58.9 71.6 85.3 111.0 162.0

Max. W.P (psi) 150 150 150 150 150 150 125

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 .86

Suction (ln. Hg.) (mm Hg) — — — — — — — — — — — — — —

Min. Bend Radius (ln.) — — — — — — —

(mm) — — — — — — —

Wt. Per Ft. (Lbs.) .37 .43 .65 .80 1.08 1.41 2.09

(Kg) .17 .20 .30 .36 .49 .64 .95

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 3137-0884 3137-0883 3137-0885 3137-0888 3137-0886 3137-0889 3137-0890

List Price Per Ft. $5.35 5.85 6.50 8.45 9.50 12.55 22.20

Medium to light duty water discharge for agricultural, construction and industrial applications. EPDM tube designed to handle a variety of liquids including Lasso*, Lasso II* and Freedom*.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC).

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile. Cover: Type P (EPDM). Black with green spiral stripe.

CONSTRUCTION:

COUPLINGS:

8 or 49 , all sizes. Reference pages 108-117. NOTE: 3:1 Safety Factor for Burst Pres, 6 , 7 sure to Working Pressure is reduced when the temperature increases.

100' length coiled and wrapped in polyethylene.

PACKAGING: BRANDING:

Continuous transfer label. Example: “ In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

Dolphin® Water Discharge 150 PSI (1.03MPa) WP Made

Special production runs require minimum order quantities of 400 feet for sizes through 4" I.D. and 200 feet for sizes above 4" I.D. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

* Registered trademarks of Monsanto.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

75W

Water Hose

(Specification 4175EC) Part No. 301529 301528 301500 301501 301502 301503 301504 301505 301506 301507 301508 301509 301510 301511 301512 301513 301514 301515 301516 301519 301521 301522

Nom. I.D. (ln.) 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 3 1/2 4 4 1/2

(mm) 19.0 22.2 25.4 28.6 31.8 34.9 38.0 41.0 44.0 48.0 51.0 54.0 57.0 60.0 63.0 67.0 70.0 73.0 76.0 89.0 102.0 114.0

Nom. O.D. (ln.) 1.17 1.30 1.42 1.55 1.67 1.80 1.92 2.05 2.17 2.30 2.42 2.55 2.67 2.80 2.92 3.05 3.17 3.30 3.42 3.92 4.42 4.92

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS: STANDARDS

Max. W.P (psi) 80 75 140 125 100 100 100 90 75 75 60 60 60 60 60 60 60 60 50 20 12 12

(mm) 29.7 33.0 36.1 39.4 42.4 45.7 48.8 52.1 55.1 58.4 61.5 64.8 67.8 71.1 74.2 77.5 80.5 83.8 86.9 99.6 112.3 125.0

(MPa) .55 .52 .97 .86 .69 .69 .69 .62 .52 .52 .41 .41 .41 .41 .41 .41 .41 .41 .34 .14 .08 .08

Suction (ln. Hg.) (mm Hg) 5.0 127 5.0 127 10.0 254 10.0 254 10.0 254 5.0 127 5.0 127 5.0 127 5.0 127 5.0 127 — — — — — — — — — — — — — — — — — — — — — — — —

Min. Bend Radius (ln.) 6.0 7.0 8.0 8.0 12.0 12.0 12.0 15.0 15.0 15.0 20.0 20.0 20.0 25.0 25.0 25.0 28.0 28.0 36.0 42.0 48.0 54.0

(mm) 152 178 203 203 305 305 305 381 381 381 508 508 508 635 635 635 711 711 914 1067 1219 1372

Wt. Per Ft. (Lbs.) .37 .42 .46 .51 .55 .60 .64 .69 .74 .78 .83 .87 92 .96 1.01 1.06 1.10 1.15 1.20 1.40 1.57 1.75

(Kg) .17 .19 .21 .23 .25 .27 .29 .31 .34 .35 .38 .40 .42 .44 .46 .48 .50 .52 .54 .64 .71 .79

Standard Pack 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X X X X 400 ft. X X X 400 ft. X 400 ft. X X X X

Gates Item No. 4175-0855 4175-0856 4175-0857 4175-0859 4175-0861 4175-0863 4175-0865 4175-0867 4175-0869 4175-0871 4175-0872 4175-0873 4175-0874 4175-0875 4175-0876 4175-0877 4175-0878 4175-0879 4175-0880 4175-0883 4175-0886 4175-0889

Open end water discharge applications and coolant connections on marine and stationary engines. -40ºF to +257ºF (-40ºC to +125ºC) continuous service. Tube: Type P (EPDM). Black. Reinforcement: Multiple plies of synthetic, high tensile textile. Cover: Type P (EPDM). Black with black spiral stripe. 5

, or

. Reference pages 108-117.

50' length coiled and wrapped in polyethylene. 50' carton: 7/8" through 1" sizes only. Continuous transfer label. Example: “

75W 2-1/2 60 PSI WP Made In U.S.A.”

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

List Price Per Ft. $7.62 7.78 8.88 9.28 9.75 10.38 10.71 11.06 11.27 11.55 12.20 13.04 13.28 13.44 14.05 15.59 16.60 16.88 17.46 19.52 22.60 25.20

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

76W

Water Hose

(Specification 4176HD) Part No. 301550 301551 301552 301553 301555 301556 301557 301558 301559 301560 301562 301563 301564 301565 301566 301567 301568 301570 301572

Nom. I.D. (ln.) 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 3 1/2 4

(mm) 22.2 25.4 28.6 31.8 34.9 38.0 41.0 44.0 48.0 51.0 57.0 60.0 63.0 67.0 70.0 73.0 76.0 89.0 102.0

Nom. O.D. (ln.) 1.40 1.52 1.65 1.77 1.90 2.02 2.15 2.27 2.40 2.52 2.77 2.90 3.02 3.15 3.27 3.40 3.52 4.02 4.52

Max. W.P (psi) 175 175 175 125 110 112 106 100 94 88 88 81 75 69 63 63 63 50 38

(mm) 35.6 38.6 41.9 45.0 48.3 51.3 54.6 57.7 61.0 64.0 70.4 73.7 76.7 80.0 83.1 86.4 89.4 102.0 115.0

(MPa) 1.21 1.21 1.21 .86 .76 .77 .73 .69 .65 .61 .61 .56 .52 .48 .43 .43 .43 .34 .26

Suction (ln. Hg.) (mm Hg) 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 10.0 254 8.0 203 5.0 127 4.0 102 3.0 76 1.0 25 — — — — — — — — — — — — — — — —

Min. Bend Radius (ln.) (mm) 8.0 203 8.0 203 8.0 203 10.0 254 12.0 305 12.0 305 15.0 381 15.0 381 15.0 381 20.0 508 20.0 508 25.0 635 635 25.0 635 25.0 711 28.0 28.0 711 36.0 914 42.0 1067 48.0 1219

Wt. Per Ft. (Lbs.) .53 .59 .65 .71 .77 .81 .87 .93 .98 1.04 1.16 1.22 1.27 1.33 1.38 1.44 1.49 1.72 1.94

(Kg) .24 .27 .30 .32 .35 .37 .40 .42 .45 .47 .53 .55 .58 .60 .63 .65 .68 .78 .88

Standard Pack 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft. 50 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X 400 ft. X X 400 ft. X 400 ft. X 400 ft. X X X

Gates Item No. 4176-0856 4176-0857 4176-0859 4176-0861 4176-0863 4176-0865 4176-0867 4176-0869 4176-0871 4176-0872 4176-0874 4176-0875 4176-0876 4176-0877 4176-0878 4176-0879 4176-0880 4176-0883 4176-0886

List Price Per Ft. $10.22 10.75 11.43 12.11 12.90 13.32 14.10 14.54 15.47 16.74 19.07 20.97 22.81 23.96 25.13 25.60 25.69 31.63 35.55

Water discharge at higher pressures than are possible with 75W and for heavy duty use on coolant connections on marine and stationary engines.

RECOMMENDED FOR:

-40ºF to +257ºF (-40ºC to +125ºC) continuous service.

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Multiple plies of synthetic, high tensile textile. Cover: Type P (EPDM). Black with black spiral stripe.

CONSTRUCTION:

COUPLINGS

, or

. Reference pages 108-117.

50' length coiled and wrapped in polyethylene. 50' carton: 7/8" size only.

PACKAGING: BRANDING:

Continuous transfer label. Example: “

SPECIAL ORDER REQUIREMENTS:

76W 2-1/2 75 PSI WP Made In U.S.A.”

Special production runs require minimum order quantities of 400 feet per size. If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Meets SAE 20RI, Class D-2, tube and cover, heavy wall.

STANDARDS

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Master Flex® 500

Water Hose

(Specification 7744) Part No. 301600 301601 301602 301603 301604 301605 301606

Nom. I.D. (ln.) 1 1/2 2 2 1/2 3 4 6 8

(mm) 38.0 51.0 63.0 76.0 102.0 152.0 203.0

Nom. O.D. (ln.) 1.67 2.16 2.55 3.17 4.20 6.20 8.16

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION: COUPLINGS: PACKAGING: BRANDING:

(mm) 42.4 54.9 64.8 80.5 107.0 157.0 207.0

Max. W.P (psi) 75 65 60 60 60 45 45

Suction (ln. Hg.) (mm Hg) — — — — — — — — — — — — — —

(MPa) .52 .45 .41 .41 .41 .31 .31

Min. Bend Radius (ln.) — — — — — — —

(mm) — — — — — — —

Wt. Per Ft. (Lbs.) .17 .21 .28 .39 .53 .88 1.27

(Kg) .08 .10 .13 .18 .24 .40 .58

Standard Pack 300 ft. 300 ft. 300 ft. 300 ft. 300 ft. 300 ft. 300 ft.

Stock (X) or Minimum Order Qty. X X X X X X X

Gates Item No. 7744-1001 7744-1002 7744-1003 7744-1004 7744-1005 7744-1006 7744-1007

General lay flat water discharge service. Excellent for job sites in construction, irrigation and areas where a lightweight, flexible hose is required. +25ºF to +120ºF (-4ºC to +49ºC) continuous service. Body: Type G (PVC). Blue with yellow identification. Reinforcement: Synthetic, high tensile textile. 5 , 6 , 7 or pages 108-117.

. One band for sizes through 2". Two bands for over 2" I.D.'s. Reference

300' length coiled in polyethylene and banded, one length. Ink stamp every 5 ft. with I.D. only.

SPECIAL ORDER REQUIREMENTS:

None.

REMNANT LENGTHS:

None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

100

List Price Per Ft. $1.32 1.61 2.30 2.71 3.63 6.05 12.10

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Shark™

Water Hose

(Specification 4686AR) Part No. 320050 320051 320052 320053 320054 320055 320056 320057 320058

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 1.45 1.71 1.96 2.46 3.02 3.58 4.58 5.60 6.65

(mm) 36.8 43.4 49.8 62.5 76.7 90.9 116.0 142.0 169.0

Max. W.P (psi) 150 150 150 150 150 150 150 150 150

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635 25.0 635

Min. Bend Radius (ln.) 5.0 6.0 8.0 10.0 12.0 15.0 20.0 25.0 30.0

(mm) 127 152 203 254 305 381 508 635 762

Wt. Per Ft. (Lbs.) .53 .68 .79 1.01 1.46 2.01 2.62 3.89 4.84

(Kg) .24 .31 .34 .46 .66 .91 1.19 1.76 2.20

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X X X

Gates Item No. 4686-0701 4686-0702 4686-0703 4686-0704 4686-0705 4686-0706 4686-0707 4686-0708 4686-0709

List Price Per Ft. $8.53 9.42 10.28 12.20 15.94 18.63 26.48 41.23 52.24

Suction hose used to convey water, detergents, phosphate ester hydraulic fluids and dilute solutions of acids, alkalies and glycols.

RECOMMENDED FOR:

-40ºF to +180ºF (-40ºC to +82ºC) continuous service.

TEMPERATURE:

Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type D (SBR). Black with green spiral stripe.

CONSTRUCTION:

COUPLINGS:

, 7 (See Coupling Section on page 108 for maximum rated working pressure.) Reference pages 108-117.

PACKAGING:

100' length coiled and wrapped in polyethylene.

Continuous transfer label. Example: “ Made In U.S.A.”

BRANDING: SPECIAL ORDER REQUIREMENTS:

Shark™ Water Suction/Discharge 150 PSI (1.03MPa) WP

Special production runs require minimum order quantities of 400 feet for sizes through 4" and 200 feet for sizes above 4". If a special transfer label is required, contact Denver Industrial Hose Marketing for minimum quantity. Remnant lengths are sometimes available in popular sizes at a discount. Contact Denver Industrial Hose Marketing for pricing, order requirements and availability.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

101

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Barracuda®

Water Hose

(Specification 4686AT) Part No. 301689 301690 301691 301692 301693 301694 301695 301697 301696

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 6 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 152.0 152.0

Nom. O.D. (ln.) 1.33 1.61 1.86 2.36 2.90 3.54 4.54 6.68 6.68

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

(mm) 33.8 40.9 47.2 59.9 73.7 89.9 115.0 170.0 170.0

Max. W.P (psi) 150 150 150 150 150 150 150 150 150

(MPa) 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03 1.03

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 5.0 5.0 6.0 8.0 10.0 14.0 18.0 28.0 28.0

(mm) 127 127 152 203 254 356 457 711 711

Wt. Per Ft. (Lbs.) .39 .51 .60 .76 1.06 1.74 2.25 3.94 3.94

(Kg) .18 .23 .27 .35 .48 .79 1.02 1.79 1.79

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 20 ft. 25 ft.

Stock (X) or Minimum Order Qty. 400 ft. X X X X X X X X

Gates Item No. 4686-0199 4686-0203 4686-0204 4686-0200 4686-0205 4686-0201 4686-0202 4686-0207 4686-0206

Medium to light duty water suction/discharge for agricultural, construction and industrial applications. EPDM tube designed to handle a variety of liquids including Lasso*, Lasso II* and Freedom*. -40ºF to +180ºF (-40ºC to +82ºC). Tube: Type P (EPDM). Black. Reinforcement: Synthetic, high tensile textile with steel wire helix. Cover: Type P (EPDM). Black with green spiral stripe.

COUPLINGS:

, 6 , 7 , 8 or 49 , all sizes. Reference pages 108-117. NOTE: 3:1 Safety Factor for Burst Pressure to Working Pressure is reduced when the temperature increases.

PACKAGING:

All lengths coiled and wrapped in polyethylene.

BRANDING: SPECIAL ORDER REQUIREMENTS:

REMNANT LENGTHS:

Continuous transfer label. Example: “ WP Made In U.S.A.”

Barracuda® Water Suction/Discharge 150 PSI (1.03MPa)

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

102

List Price Per Ft. $5.50 6.00 7.25 8.40 10.40 11.60 16.50 43.15 43.15

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes Supplement #4 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 100GR

Water Hose

(Specification 7744) Part No. 333100 333101 333102 333103 333104 333105 333106 333107 333108

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 1.27 1.53 1.82 2.36 2.90 3.44 4.52 5.65 6.80

Max W.P.* (psi) 90 90 90 70 65 60 50 45 45

(mm) 32.3 38.9 46.2 59.9 73.7 87.4 114.8 143.5 172.7

(MPa) .62 .62 .62 .48 .45 .41 .34 .31 .31

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 3.0 4.0 5.0 6.0 8.0 9.0 13.0 21.0 24.0

(mm) 76 102 127 152 203 229 330 533 610

Wt. Per Ft. (Lbs.) .28 .34 .48 .67 .95 1.25 1.94 3.09 4.56

(Kg) .13 .15 .22 .30 .43 .57 .88 1.40 2.07

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X 1,000 ft. X

Gates Item No. 7744-3101 7744-3102 7744-3103 7744-3104 7744-3105 7744-3106 7744-3107 7744-3108 7744-3109

List Price Per Ft. $2.54 3.31 3.76 5.44 8.56 10.31 17.20 24.88 32.46

*Working pressure and suction at +72ºF (+22ºC).

Conveying water and light chemical solutions under suction or rated discharge pressure.

RECOMMENDED FOR:

-10ºF to +130ºF (-23ºC to +55ºC) continuous service.

TEMPERATURE:

Tube: Type G (PVC). Green. Reinforcement: Rigid thermoplastic helix.

CONSTRUCTION:

COUPLINGS:

, all sizes. Reference pages 108-117.

All lengths coiled and wrapped in polyethylene.

PACKAGING:

Unlabeled.

BRANDING: SPECIAL ORDER REQUIREMENTS:

Special production runs require minimum order quantities of 1,000 feet per size. No deviations allowed to above product. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

103

39496-000 June 3, 2002 Supersedes Supplement #5 December, 2001

Industrial Hose Products/List Prices

Master-Flex® 101CL

Water Hose

(Specification 7744) Part No. 333075 333076 333077 333078 333079 333080 333081 333082 333083

Nom. I.D. (ln.) 1 1 1/4 1 1/2 2 2 1/2 3 4 5 6

(mm) 25.4 31.8 38.0 51.0 63.0 76.0 102.0 127.0 152.0

Nom. O.D. (ln.) 1.29 1.56 1.84 2.39 2.92 3.46 4.56 5.65 6.80

Max. W.P.* (psi) 100 90 90 70 65 55 50 45 45

(mm) 32.8 39.6 46.7 60.7 74.2 87.9 115.8 143.5 172.7

(MPa) .69 .62 .62 .48 .45 .38 .34 .31 .31

Suction* (ln. Hg.) (mm Hg) 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711 28.0 711

Min. Bend Radius (ln.) 3.0 4.0 4.0 5.0 7.0 8.0 12.0 21.0 23.0

(mm) 76 102 102 127 178 203 305 533 584

Wt. Per Ft. (Lbs.) .28 .35 .48 .67 .95 1.25 1.94 3.09 4.56

(Kg) .13 .16 .22 .30 .43 .57 .88 1.40 2.07

Standard Pack 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft. 100 ft.

Stock (X) or Minimum Order Qty. X X X X X X X 1,000 ft. X

Gates Item No. 7744-2101 7744-2102 7744-2103 7744-2104 7744-2105 7744-2106 7744-2107 7744-2108 7744-2109

List Price Per Ft. $2.44 3.47 3.73 5.22 7.13 8.97 12.89 23.52 27.14

*Working pressure and suction at +72ºF (+22ºC).

RECOMMENDED FOR: TEMPERATURE: CONSTRUCTION:

COUPLINGS: PACKAGING: BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Conveying water and light chemical solutions where a clear PVC hose with a white helix is desirable for heavy duty applications. -10ºF to +130ºF (-23ºC to +55ºC) continuous service. Tube: Type G (PVC). Clear. Reinforcement: Rigid thermoplastic helix. 1

. Reference pages 118-128.

All lengths coiled and wrapped in polyethylene. Unlabeled. Special production runs require minimum order quantities of 1,000 feet per size. No deviations allowed to above product. None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

104

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

113S Creamery/Paper Mill Washdown

Water Hose

(Specification 3213B) Without Nozzle Part No. 301950 301948 301951 301949 301952

Nom. I.D. (ln.) 1/2 3/4 3/4 1 1

(mm) 12.7 19.0 19.0 25.4 25.4

Nom. O.D. (ln.) .91 1.25 1.25 1.52 1.52

(mm) 19.0 25.4

Nom. O.D. (ln.) 1.25 1.52

(mm) 23.1 31.8 31.8 38.6 38.6

Max. W.P (psi) 200 200 200 200 200

(mm) 31.8 38.6

Max. W.P (psi) 200 200

(MPa) 1.38 1.38 1.38 1.38 1.38

Suction (ln. Hg.) (mm Hg) 25.0 635 15.0 381 15.0 381 15.0 381 15.0 381

Min. Bend Radius (ln.) 5.0 6.0 6.0 8.0 8.0

(MPa) 1.38 1.38

Suction (ln. Hg.) (mm Hg) 15.0 381 15.0 381

Min. Bend Radius (ln.) 6.0 8.0

(mm) 127 152 152 203 203

Wt. Per Ft. (Lbs.) .28 .49 .49 .65 .65

(mm) 152 203

Wt. Per Ea. (Lbs.) 25.00 35.00

Stock (X) or Minimum Order Qty. X X X X 20,000 ft.

(Kg) .13 .22 .22 .30 .30

Standard Pack REEL 50 ft. REEL 50 ft. REEL

(Kg) 11.34 15.88

Stock (X) Standard or Minimum Pack Order Qty. 50 ft./NOZZLE 1 EA 50 ft./NOZZLE 1 EA

Gates Item No. 3213-0401 3213-0413 3213-0501 3213-0416 3213-0415

List Price Per Ft. $2.73 3.91 3.91 5.63 5.63

With Nozzle Part No. 301955 301956

Nom. I.D. (ln.) 3/4

Gates Item No. 3213-0510 3213-0511

List Price Per Ea. $300.98 388.96

Hot water up to 212ºF (100ºC) where steam is injected into the water for food handling or processing plant washdown service requiring hose with a white cover. CAUTION: NOT RECOMMENDED FOR USE WITH PURE STEAM. Also ideal for paper mills.

RECOMMENDED FOR:

-40ºF to +212ºF (-40ºC to +100ºC) continuous service.

TEMPERATURE:

Tube: Type P (EDPM). Black. Reinforcement: Synthetic, high tensile textile cord. Cover: Type P (EDPM) White. All sizes are perforated.

CONSTRUCTION:

Plain. (3/4" and 1" also available with built-in nozzles.)

HOSE ENDS: COUPLINGS:

PACKAGING:

1/2":

. Reference pages 108-117.

Packaged in 600' to 800' reels. Maximum 4 pieces. One length 25' to 50'. Maximum of 2 lengths under 100'. 3/4" and 1": Packaged in 300' to 400' reels. Maximum 3 pieces. One length 25' to 50'. Maximum of 2 lengths under 100'. 50' lengths with (or without) a built-in nozzle.: Packaged 50' coiled in a carton.

BRANDING:

Continuous ink print label. Example: “ Made In U.S.A.”

SPECIAL ORDER REQUIREMENTS:

113S Washdown 3/4 Inch (19.0mm) 200 PSI (1.38MPa) WP

Special production runs require minimum order quantities of 25,000 feet for 1/2" and 20,000 feet or multiples thereof for 3/4" and over. None.

REMNANT LENGTHS:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

105

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Cyclone®

Water Hose

(Specification 3217HY) Part No. 301975 301976 301977 301979 301978

Nom. I.D. (ln.) 3/8 3/8 1/2 1/2 3/4

(mm) 9.5 9.5 12.7 12.7 19.0

Nom. O.D. (ln.) .73 .73 .94 .94 1.20

RECOMMENDED FOR:

TEMPERATURE: CONSTRUCTION: COUPLINGS: PACKAGING:

BRANDING: SPECIAL ORDER REQUIREMENTS: REMNANT LENGTHS:

Max. W.P (psi) 1000 1000 1000 1000 1000

(mm) 18.5 18.5 23.9 23.9 30.5

(MPa) 6.90 6.90 6.90 6.90 6.90

Suction (ln. Hg.) (mm Hg) 30.0 762 30.0 762 30.0 762 30.0 762 30.0 762

Min. Bend Radius (ln.) 4.0 4.0 5.0 5.0 6.0

(mm) 102 102 127 127 152

Wt. Per Ft. (Lbs.) .18 .18 .29 .29 .41

(Kg) .08 .08 .13 .13 .19

Standard Pack REEL 100 ft. REEL 100 ft. REEL

Stock (X) or Minimum Order Qty. X X X 5000 ft. X

Gates Item No. 3217-0585 3217-0584 3217-0586 3217-0587 3217-0588

High pressure washer operations using mild detergents in meat and poultry plants. Cover is resistant to weather, oil, animal fat, abrasion and heat encountered in packing plant cleaning applications. Suitable for air and water service. -40ºF to +212ºF (-40ºC to +100ºC) continuous washdown service. Tube: Type C2 (Modified Nitrile). Black. Reinforcement: Braided, synthetic high tensile cord. Cover: Type C2 (Modified Nitrile). Yellow. 72

Gates permanent Power Crimp® couplings. Reference pages 108-117.

3/8" through 3/4": Packaged in 500' to 750' reels. Maximum 3 pieces. Minimum length 50'. 3/8" x 100': Packaged 500' in a pallet box. Each length coiled and tied. 1/2" x 100': Packaged 500' in a pallet box. Each length coiled and tied. Continuous ink print label. Example: “ WP Made In U.S.A.”

Cyclone® Washdown 3/8 Inch (9.5mm) 1000 PSI (6.90MPa)

Special production runs require minimum order quantities of 5,000 feet per size. For special requirements contact Denver Industrial Hose Marketing. None.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

106

List Price Per Ft. $3.75 4.23 5.20 5.88 8.25

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Hose Couplings Swaged-On Permanent Coupling Mulconroy Nipples & Ferrules 71

Malleable Iron-150 Lb., Also Fits 125 Lb. Standard Drilling Each End. Part No. 309500 309505 309501

Size (In.) 2 2 1/2 3

Weight Per Each (Lbs.) 8.00 12.00 16.00

Gates Item No. 7327 7327 7327

List Price Each End $835.94 984.38 1148.44

Note: Mulconroy Nipples and Ferrules are not available in 4" and 6".

NOTE: Available in coupled assemblies only, not sold separately.

39496-000 June 3, 2002

Supersedes 39496-000 January 2, 1998

Wildman Type Q Reusable Coupling (For Powerbraid® Plus) Size (In.) 2 2 1/2 3

Part No. 309600 309601 309602

Gates Item No. 7310-0001 7310-0003 7310-0005

List Price Each End $1,168.79 1,325.51 1,713.34

NOTE: Available in coupled assemblies only, not sold separately.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

107

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices How To Use The Coupling Section Couplings are designated by Block Numbers, and are described as to construction and source. Adapters and fittings are available for special applications. Each coupling has a pressure rating of Low, Medium or High. These terms have a general meaning as follows: Low Pressure.........................................................100 psi maximum Medium Pressure ..................................................315 psi maximum High Pressure ........................................................800 psi maximum

Coupling ratings apply only where the recommended clamps or bands are used. Use this information as a guide since different tube stocks affect coupling retention. Common shank couplings or nipples with bands or clamps should be used only on straight or plain end water or material handling hoses up to the following rated working pressures: 1/2"- l 1/2"I.D. — 315 psi 2 -3" I.D. — 100 psi 4" I.D. — 75 psi

5" I.D. — 60 psi 6" I.D. — 50 psi

NOTE: Band-It® Swaged Hose Nipples, a form of combination nipple, can be used for higher rated working pressures. They are available in plated and unplated steel plus stainless steel with Tapered Pipe Thread for 1/2"through 6" I.D. hose. Listed are all of the clamps, bands and ferrules used to secure the couplings to the hose. The proper clamp size should be selected carefully, since many clamps will fit only one hose size or a narrow range of sizes. For certain critical fluids, specific couplings are used, as follows:

Critical Applications 1. Use only the couplings recommended in this catalog for conveying: Steam LP Gas Corrosive Chemicals Petroleum Products 2. For conveying flammable fluids, use couplings made of nonsparking materials, such as brass or aluminum. 3. For ground fueling of aircraft, use certified coupled assemblies only.

When you have selected a hose from the Hose Section, you will have found one or more coupling recommendations for that hose. The following procedure will help you make the final selection:

A. If more than one coupling is recommended, make a final selection for type of coupling on basis of cost, sizes available, thread type available and application. B. Determine how the coupling is to be fastened to the hose—ferrule, band or clamp.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

108

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Coupling Installation Before making any hose assembly, check over these general instructions and precautions: 1. Square Ends—Before attaching a coupling to the hose, make sure the end is cut square. This will help prevent leakage of the coupling. 2. Proper Fit of Ferrules and Clamps—This is important. Make sure you are using the correct sizes for the hose being coupled. Never buff the cover, except when specified for certain hydraulic hose couplings, and you should not enlarge the hose tube in any way to make the coupling insert fit. Occasionally, a nipple pusher tool will he helpful in pushing the insert into the hose. 3. Installation Lubricants—Use of lubricants on coupling inserts and ferrules will simplify coupling installation and reduce possibility of damage to the hose. Some lubricants to use are water, soap solution or lactol. Or, you can use a solution of glycerin and alcohol made up of one (1) part glycerin and 15 parts wood alcohol by volume. 4. Appearance of the Hose Assembly—A properly installed coupling significantly improves customer acceptance of the product. It also provides added assurance of satisfactory service and safety of assembly. 5. Seal the Ends—Where the hose is intended for use in petroleum transfer applications and hose ends will be exposed after couplings are attached, apply a sufficient amount of quality Neoprene cement or shellac to seal the ends. 6. Critical Applications. (a) Use only the couplings recommended on pages 108-117 for conveying: • Steam • Petroleum Products • LP Gas • Edible Products • Corrosive Chemicals (b) For conveying flammable fluids, use couplings made of nonsparking materials; i.e., brass or aluminum. (c) For aircraft ground fueling hose, use factory coupled assemblies only.

NOTE: Refer to Gates Coupling Manual #39505 for insta1lation information and additional general information.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

109

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Pipe Thread Usage There are several terms or abbreviations which have come into common use for denoting pipe threads. Some of these are: Iron Pipe Threads

Couplings which come in sets usually have a female with NPSM threads and washer; and a male with NPT or NPSM threads. Long shank couplings and pin lug couplings are examples where the male has NPSM threads. Reusable petroleum couplings are examples of sets in which the male has NPT threads.

IPT Tapered IPT

Standard brass inserts have NPTF males and solid females and NPSM swivel females. The seal is made by contact of chamfers or tight fit of threads. (See Chart No.1 on page 117.)

Straight IPT IP—S IP—T These may he satisfactory for general reference, but since there are several types of pipe thread, it is best to use the notations as given by a recognized standard (ANSI B2.1). The types in this standard which are used with industrial hose couplings are listed on page 118. Compatibility of threads and method of sealing determine which type of thread is to be used. An NPT male and female form a pressure-tight joint, and usually some type of sealing compound is placed on the threads. NPTF threads are similar in that the seal is made by tight fit between the threads. However the fit is close enough that a sealing compound is not needed. NPSM threads are used for either male or female fittings, but the seal is formed by compressing a packing or by metal contact between chamfers on the male and female. Size range is from 1/4" through 6" nominal pipe I.D. NPSH threads are similar to NPSM threads but are used mostly for fire hose or special couplings. Size range is from 1/2" through 2" norninal pipe I.D. The seal is made by compressing a packing. GHT, garden hose threads, are a form of NPSH threads used on water hose. There is only one basic size of thread, 3/4 - 11 1/2. It is not compatible with 3/4-14NPT, NPSH or NPSM threads.

Couplings for hydraulic hose have threads which may conform to the above descriptions. In addition, there are many other types peculiar to the hydraulic field. For a complete description of threads, identification, sizes, methods of sealing and other related data, see Hydraulic Hose Catalog #35093. Combinations of Pipe Threads that Are Compatible: Female Male NPT (Thread Seal)

NPT NPTF

NPTF (Thread Seal)

NPTF (Dryseal) NPT

NPSM (Washer Seal)

NPT NPTF NPSM

NPSM (Mechanical Seal)

NPT NPTF

NPSH (Washer Seal)

NPSH NPT

GHT (Washer Seal)

GHT

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

110

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Pipe Thread Usage (Continued)

Chart No. 2 Nominal Pipe Size (ln.) 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 3 1/2 4 5 6

* **

Pipe O.D. (ln.) .405 .504 .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625

American Standard Pipe Threads (ANSI B2.1) NPT & NPTF NPT *Ext. Thrd. *Int. Thrd. Threads Pitch (A) Pitch (B) Per Inch Diameter Diameter 27 0.36351 0.37476 18 0.47739 0.48989 18 0.61201 0.62701 14 0.75843 0.77843 14 0.96768 0.98887 11 1/2 1.21363 1.23863 11 1/2 1.55713 1.58338 11 1/2 1.79609 1.82234 11 1/2 2.26902 2.29627 8 2.71593 2.76216 8 3.34062 3.38850 8 3.83750 3.88881 8 4.33438 4.38712 8 5.39073 5.44929 8 6.44609 6.50597

NPSM** Ext. Thrd. Max. Major Diameter 0.409 0.541 0.678 0.844 1.054 1.318 1.663 1.902 2.376 2.877 3.503 4.003 4.502 5.564 6.620

Int. Thrd. Min. Minor Diameter 0.362 0.470 0.607 0.753 0.964 1.208 1.553 1.792 2.265 2.718 3.344 3.845 4.343 5.405 6.462

Dimensions A & B shown on the sketch above Loose Fitting

Chart No. 3

GHT

American Standard Straight Pipe Threads for Hose Couplings and Nipples Nominal Size (Hose I.D.) Threads Depth of (ln.) Per ln. Pitch Thread Coupling 1/2, 5/8, 3/4 11 1/2 0.08696 0.05648 Nipple 1/2, 5/8, 3/4 11 1/2 0.08696 0.05648 Female

NPSH

1/2 3/4 1 1 1/4 1 1/2 2

14 14 11 1/2 11 1/2 11 1/2 11 1/2

0.07143 0.07143 0.08696 0.08696 0.08696 0.08696

0.04639 0.04639 0.05648 0.05648 0.05648 0.05648

14 14 11 1/2 11 1/2 11 1/2 11 1/2

0.07143 0.07143 0.08696 0.08696 0.08696 0.08696

0.04639 0.04639 0.05648 0.05648 0.05648 0.05648

Male 1/2 3/4 1 1 1/4 1 1/2 2

Major Diam. Min. 1.0725 Max. 1.0625 Major Diam. Min. 0.8323 1.0428 1.3051 1.6499 1.8888 2.3628 Major Diam. Max. 0.8248 1.0353 1.2951 1.6399 1.8788 2.3528

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

111

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Couplings for Gates Hoses 1

Long Shank

Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or NPSM. Sources: Dixon Valve & Coupling Co. H.B. Sherman Mfg. Co. Seal-Fast Bobo, Inc. 2

Lightweight Water Hose

Description: Spun or wrought brass serrated shank, round swivel female and solid male, both GHT, washer seal. Sources: American Coupling Co. L.R. Nelson Corp. H.B. Sherman Mfg. Co. 3

Description: Cast brass, serrated shank, hex swivel female with washer, solid male, GHT threads, 3/4-11 1/2. Sources: J.C. Gadd Co. H.B. Sherman Mfg. Co. Seal-Fast Bobo, Inc. Stayput Clamp & Coupling Co. 4

Machined Brass Short Shank

Tri-Lokt

Description: Machined steel insert, male NPT threads only. Held in place with steel yoke and Band-It Jr. clamps. Insert is reusable—can be reinstalled with new yoke and clamps. Band-It Source:

Single or Double Bolt Malleable Iron Clamp

Description: Cast malleable iron, cadmium plated. Dixon Valve & Coupling Co. Source: 14

Interlocking, Ground Joint

Brass Pin Lug

Description: Cast brass shank and swivel, shank is serrated. NPSM threads in female and male, with washer seal. Sizes under 3” have lugs on female only. Sources: Dixon Valve & Coupling Co. 6

Description: Swaged steel with scored or serrated shank, NPT threads same nominal size as I.D. of hose. Special plastic materials available. Sources: Band-It Dixon Valve & Coupling Co. Martin Brass Works, Inc. Screw Machine Products Co. Seal-Fast Bobo,lnc. Stayput Clamp & Coupling Co.

Description: Machined brass, serrated shank. Each set has round swivel female and solid male, GHT, washer seal. Octagon nut male and female. Sources: American Coupling Co. Anchor-Lenz Div. Royal Brass, Inc. H.B. Sherman Mfg. Co. 5

Victaulic Nipple

Cast Brass Short Shank

Combination Nipple

Malleable Iron Pin Lug

Description: Malleable iron shank and swivel with serrated shank, cadmium plated. NPSM threads in male and female, washer seal. Pin lugs on female Only. Sources: Dixon Valve & Coupling Co. H.B. Sherman Mfg. Co. Seal-Fast Bobo, Inc.

Description: Malleable iron swivel. Inserts and spud may be either steel or malleable iron. All parts are cadmium plated. Male and female threads both NPT with same nominal size as hose l.D. Ground joint between spud and female insert. Available with 2- and 4-bolt clamps.

Sources: 15

Dixon Valve & Coupling Co. Seal-Fast Bobo, Inc.

Interlocking, Washer Joint

Description: Malleable iron swivel. Insert and spud may be either malleable iron or steel. All parts are cadmium plated. Female thread in spud is NPT with same nominal size as hose I.D. Washer joint between insert and spud. Available with 2- and 4-bolt clamps. Dixon Valve & Coupling Co. Source:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

112

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Couplings for Gates Hose—continued 21 18

Universal Quick Acting

Description: Cast malleable iron with cadmium plate, cast bronze. Washer seal between two quick-acting heads. Several types of heads are available, but all have same-size attaching heads regardless of hose size. Fingers lock together with quarter-turn rotation. Sources: Dixon Valve & Coupling Co. Foster Mfg. Co., Inc. Seal-Fast Bobo, Inc. Stayput Clamp & Coupling Co. Thor Power Tool Co.

Band Rolls

Description: Available in 100-foot rolls, carbon steel or stainless steel. Buckles—100 per box Sources: Band-It Punch-Lok Co.

Reusable Gasoline Pump

Description: Various materials; Two piece construction. Male NPT 19

Standard Air Hose

Description: Machined brass, with serrated shank, NPTF threads on hex solid male and on hex solid female, and NPSM threads on hex swivel female. Sources: American Coupling Co. Anchor-Lenz Div. Dixon Valve & Coupling Co. Foster Mfg. Co., Inc. National Coupling Co. Rostra Engineered Products Royal Brass, Inc. Schrader Automotive Group H.B. Sherman Mfg. Co. 20

Ferrules

or IPT threads (also see coupling 47 ). Sources: J.C. Gadd Co. Multimatic Products, Inc. Rostra Engineered Products Screw Machine Products Co. Serv-AII Die and Tool 24

Description: Various materials; One piece construction. Male NPT or IPT threads. Sources: J.C. Gadd Co. Multimatic Products, Inc. Rostra Engineered Products Serv-AII Die and Tool 26

Description: All stock ferrules are plain drawn brass. Sources: Century Brass Products Jagemann Stamping Co. Winzeler Stamping Co. 21

Band-It Jr., Clamps

Internal Expansion-Brass

Description: Body is forged brass. Ferrule is cold-drawn copper alloy. Male coupling has NPT threads, female swivel coupling has NPSH threads. All threads same nominal size as hose l.D. except 1 3/8" l.D. size which has 1 1/2 - 11 1/2 threads. On 1 l/2" and larger sizes, female has special tightening lugs. Sources: Couple-Up Rostra Engineered Products United Metal Industries, Inc. 26

Description: A preformed ring clamp of rust-resistant carbon steel or Type 201 stainless steel. Also available in Type 316 stainless steel, and nonsparking silicon bronze. Sources: Band-It Punch-Lok Co.

Permanent Gasoline Pump Hose

Ferrules for Internal Expansion

Sources:

Couple-Up Rostra Engineered Products United Metal Industries, Inc.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

113

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Couplings for Gates Hose—continued 27

Reusable Petroleum Hose (Compression Ring)

Description: Machined brass coupling body, cast brass sleeve, flat steel wire compression ring. Male NPT or female swivel with NPSM threads and washer seal. Threads are same nominal size as hose l.D. Sources: Rostra Engineered Products United Metal Industries, Inc. 28

Sources:

Barrel Pump

Description: Various materials with serrated shank. Threads are male NPT only. Sources: J.C. Gadd Co. Serv-AII Die and Tool

Stainless Steel Nipples

Ace Enterprises, Inc. Clemco, Inc. Empire Abrasive Equipment Co. Kelco Sales & Eng. Co. Pangborn Co. Pauli & Griffin Co. Sanstorm-Bowen Tools, Inc. Seal-Fast Bobo, Inc.

Reusable Fuel Oil

Description: This coupling is similar to 23 except it has a brass finish, instead of chrome plating. Male NPTF threads, female NPSM threads, washer seal. Threads same nominal size as hose l.D., except as noted. Sources: Rostra Engineered Products United Metal Industries, Inc. 48

Description: Type 316 stainless steel, with serrated shank, solid male NPT threads, hex swivel female, NPSM threads, washer seal. Threads same nominal size as hose l.D Sources: Martin Brass Works Inc. Dixon Valve & Coupling Co.

Sandblast

Band-It Nipples

Description: Machined steel hex inserts, rust-resistant blued finish, serrated shank, male NPT threads. Band-It Source:

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

114

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Couplings for Gates Hose—continued 49

Quick-Connecting

Description: The basic parts of this coupling are a bronze female shank coupler and a male adapter, which have a washer seal but no threads. These two parts fit snugly together and are held in place by two cams on the female shank coupler which rotate against a groove in the male adapter. This allows the coupling to be connected or disconnected very quickly. Adapters and dust caps are available as shown below. Standard materials are bronze or aluminum. Sources: Dixon Valve & Coupling Co. Ever-Tite Coupling Co., Inc. OPW Div. of Dover Corp. P-T Coupling Co., Inc. Sea;-Fast Bobo, Inc.

Permanent Swaged

Mulconroy Solid Male

Mulconroy Ferrule

Description: NPT threads on connecting end of stem for easy flange attachment. Strong collar to anchor ferrule to stem. Electroplated steel. Also available in stainless steel, brass and other special metals. Sources: Gates Rubber Co. Dixon Valve & Coupling Co. Civacon 72

Gates Crimped

PC Solid Male PC Ferrule

NOTE:

Part A and Part D have female NPT threads. Part B and Part F have male NPT threads. Above threads have same nominal size as hose l.D. The above couplers and adapters are used to convert threaded-end couplings to quick connect.

Description: NPT threads on connecting end of stem for easy flange attachment. Strong collar to anchor ferrule to stem. Electroplated steel. Also available in stainless steel. Sources: Gates Rubber Co. 73

Permanent Swaged or Crimped

Fast-Lok Clamps Cam and Groove

Open-End Fast-Lok

MegaCrimp®

Clamps Preformed Fast-Lok Clamps

Description: Open-end band or preformed band of rust-resistant steel. Also available in stainless steel. Sources: Fast-Lok Div. Punch-Lok Co.

Description: NPT threads on connecting end of stem for easy flange attachment. Tuffcoat™ plated steel. The “C” insert assures an even distribution of crimping forces to form a concentric seal. Sources: The Gates Rubber Co.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

115

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

速

Industrial Hose Products/List Prices

Coupling Sources Ace Enterprises, Inc. Miami, FL 33168 (305) 685-8784

Graco, Inc. Minneapolis, MN 55440 (612) 623-6743 (Paint Spray Couplings) Jagemann Stamping Company Manitowoc, WI 54220 (414) 682-4633

American Couplings Company Bellwood, IL 60104 (312) 547-1000 2

Ever-Tite Coupling Co., Inc. Knoxville, TN 37914 (800) 382-8483 49

Fast-Lok Dlv. of Deco Products Co. Decorah, IA 52101 (319) 382-4264 61

Sherman Mfg. Co., H.B. Div. of Dayton-Walther Corp. Battle Creek, Ml 49017 (616) 964-7102

P-T Coupling Co., Inc. Enid, OK 73701 (405) 237-4060

Thor Power Tool Company Stewart-Warner Corp. Johnson City, TN 37601 (615) 928-3154

Pangborn Co., The Hagerstown, MD 21740 (301) 739-3500 36

Pauli & Griffin Co. Vacaville, CA 94080 (415) 873-4540

United Metal Industries, Inc. New Hyde Park, NY 11040 (516) 354-6800

Punch-Lok Co. Lombard, IL 60607 (312) 971-9210 19

Serv-AII Die and Tool Co. Crystal Lake, IL 60014 (815) 459-2900

49 18

Seal-Fast Bobo, Inc. Houston, TX 77220 (713) 675-6324

Empire Abrasive Equipment Corp. Langhorne, PA 19047 (215) 752-8800

Foster Mfg. Co., Inc. Springfield, MO 65807 (417) 881-6600

OPW Div. of Dover Corp. Cincinnati, OH 45240 (513) 870-3100

Dixon Valve & CouplIng Co. Chestertown, MD 21620 (410) 778-2000 6

Scully Signal Co. Wilmington, MA 01887 (617) 729-7518

Nelson Corp., L.R. Peoria, IL 61615 (309) 692-2200

Screw Machine Products Co. Wedgon Coupling, Dlv. Denver, CO 80216 (303) 296-7360

National Coupling Co. Stafford, TX 77477 (713) 499-2583

Clemco Industries San Mateo, CA 94403 (415) 570-6000 21

Martin Brass Works, Inc. Jamaica, NY 11433 (718) 523-3146 Multimatic Products, Inc. Hauppauge, NY 11788 (516) 231-1515

Binks Mfg. Company Franklin Park, IL 60131 (847) 671-3000 (Paint Spray Couplings) Civacon Kansas City, MO (816) 741-6600 36

Schrader Automotive Group Division of Scovill, Inc. Nashville, TN 37215 (615) 383-3400

Kelco SaIes & Engineering Co. Norwalk, CA 90650 (213) 868-9861

Band-It Divn. Houdaille Industries, Inc. Denver, CO 50216 (303) 320-4555 7

Sanstorm-Bowen Tools, Inc. Houston, TX 77253 (713) 869-2227

Anchor-Lenz Division The Lenz Co. Dayton, OH 45401 (513) 277-9364 4

Royal Brass, Inc. Fond du Lac, WI 54935 (414) 921-1550

Winzler Stamping Company Montpelier, OH 43543 (419) 485-3147 26

Gadd, J.C., Company Denver, CO 80223 (303) 744-3345 3

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

116

速

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

Definitions and Abbreviations API Thread—American Petroleum Institute Thread. Block Number—A number enclosed in a block, e.g., designates each Gates coupling.

I.D.—Abbreviation for Inside Diameter. 1

, that

Insert—That part of the coupling which fits into the I.D. of the hose, which often has a threaded end, also called stem or nipple.

Conductive—Rubber designed to transmit electrical current; conducting static electricity

IPT—Iron Pipe Thread. A general term applying to all pipe threads. See pages 110 and 111.

Coupling—A device used to attach a hose to a fitting or other hose in a secure, leak proof manner. There are two primary types: Permanent—A coupling that is applied to the hose with crimping or swaging dies and cannot be easily removed. It is referred to as a "one-time coupling." Reusable—A coupling that can be used more than once. It can be applied to or removed from a hose with the use of simple tools.

MBR—Abbreviation for Minimum Bend Radius. It's the smallest radius, in inches, around which a hose can be bent without overstressing components, collapsing the hose wall and without substantially reducing fluid flow.

Coupling Joint—This leak proof connection is achieved by fastening together the mating surfaces of two couplings. The leak proof seal is obtained by any one of these methods: 1. Washer seal 2. Mechanical seal 3. Thread seal Ferrule—The external part of the coupling which serves to hold the insert to the hose. GHT—Garden Hose Thread. See Pipe Thread Usage, page 111 for compatibility. Helix—Reinforcement formed by spiraling a wire or plastic rod around the cylindrical body of hose—usually to resist collapse or improve minimum bend radius.

NPSH—American Standard Straight Pipe Thread for hose couplings and nipples. NPSM—American Standard Straight Pipe Thread—Comrnon name, straight pipe thread for mechanical joints. NPT—American Standard Taper Pipe Thread—Common name, tapered pipe thread. NPTF—American Standard Dryseal Pipe Thread—Common name, dryseal for pressure type joints without sealer. O.D.—Abbreviation for Outside Diameter. Resistant—Rubber designed to prevent transmission of electrical current; nonconductive. Shank—That part of the coupling which fits into the I.D. of the hose.

Chart No. 1 Coupling Joints

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

117

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices RMA Tolerances 1.

Hand Built Hose – Wire and Nonwire (W and SB) Size (ln.) 3/4 and under Over 3/4 through 2 Over 2 through 3 1/2 Over 3 1/2 through 4 Over 4 through 6 5/8

O.D. (ln.) ± .031 ± .063 ± .063 ± .063 + .125 - .250

I.D. (ln.) ± .023 ± .031 ± .063 I.D. (ln.) ± .016 ± .023 ± .031 ± .039 ± .039 ± .047 ± .063

O.D. (ln.) ± .031 ± .031 ± .063 O.D. (ln.) ± .031 ± .031 ± .031 ± .047 ± .063 ± .063 ± .063

Tolerance (ln.)

12 and under ± .125 Over 12 through 24 ± .188 Over 24 through 36 ± .250 Over 36 through 48 ± .375 Over 48 through 72 ± .500 Over 72 ± 1% *Helix wire hoses which can be coiled can appear shorter than the factory cut length. This phenomenon is normal, and the hose(s) will return to the factory cut length upon initial pressurization.

Horizontal Braid Hose (HB and HW) Size (ln.) 1/4, 5/16, 3/8 1/2, 5/8, 3/4 1 1 1/4, 1 1/2 2 2 1/2, 3 3 1/2, 4

Specified Cut Length of Hose* Length (ln.)

Vertical Braid Hose (B) & Spiral Hose Size (ln.) 3/16 1/4 through 3/4 1 through 1 1/2

I.D. (ln.) ± .031 ± .031 ± .047 ± .063 + .063 - .250

Made-To-Order Hoses Wire-Inserted Construction, Gates Length (Ft.) up to 5 5 to 10 10 to 25 over 25

Tolerance (ln.) ±1 + 2, -1 ±2 ± 1%

How to Measure Hose lengths and Assemblies

Coupled or Coupled and Flanged Hose or hose assembly lengths (“L”) are measured as shown above, unless otherwise specified.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

118

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Care and Maintenance of Hose (Reprinted From RMA Hose Handbook)

Hose has a limited life and the user must be alert to signs of impending failure, particularly when the conditions of service include high working pressures and/or the conveyance or containment of hazardous materials. The periodic inspection and testing procedures described here provide a schedule of specific measures which constitute a minimum level of user action to detect signs indicating hose deterioration or loss of performance before conditions leading to malfunction or failure are reached. SAFETY WARNING: Failure to follow properly the manufacturer's recommended procedures for the care, maintenance and storage of a particular hose might result in its failure to perform in the manner intended and might result in possible damage to property and serious bodily injury. General instructions are also described for the proper storage of hose to minimize deterioration from exposure to elements or environments which are known to be harmful to rubber products. Proper storage conditions can enhance and extend substantially the ultimate life of hose products.

General Care and Maintenance of Hose Hose should not be subjected to any form of abuse in service. It should be handled with reasonable care. Hose should not be dragged over sharp or abrasive surfaces unless specifically designed for such service. Care should be taken to protect hose from severe end loads for which the hose or hose assembly were not designed. Hose should be used at or below its rated working pressure; any changes in pressure should be made gradually so as to not subject the hose to excessive surge pressures. Hose should not be kinked or be run over by equipment. In handling, large size hose dollies should be used whenever possible; slings or handling rigs, properly placed, should be used to support heavy hose used in oil suction and discharge service.

1. Air or any other compressible gas must never be used as the test media because of the explosive action of the hose should a failure occur. Such a failure might result in possible damage to property and serious bodily injury. 2. Air should be removed from the hose by bleeding it through an outlet valve while the hose is being filled with the test medium. 3. Hose to be pressure tested must be restrained by placing steel rods or straps close to each end and at approximate 10 foot (3 m) intervals along its length to keep the hose from "whipping" if failure occurs. The steel rods or straps are to be anchored firmly to the test structure but in such a manner that they do not contact the hose which must be free to move.

General Test and Inspection Procedures for Hose

4. The outlet end of hose is to be bulwarked so that a blown-out fitting will be stopped.

An inspection and hydrostatic test should be made at periodic intervals to determine if a hose is suitable for continued service.

5. Provisions must be made to protect testing personnel from the forces of the pressure media if a failure occurs.

A visual inspection of the hose should be made for loose covers, kinks, bulges or soft spot which might indicate broken or displaced reinforcement. The couplings or fittings should be closely examined and, if there is any sign of movement of the hose from the couplings, the hose should be removed from service.

6. Testing personnel must never stand in front of or in back of the ends of a hose being pressure tested.

The periodic inspection should include a hydrostatic test for one minute at 150% of the recommended working pressure of the hose. An exception to this would be woven jacketed fire hose.* During the hydrostatic test, the hose should be straight. not coiled or in a kinked position. Water is the usual test medium and, following the test, the hose may be flushed with alcohol to remove traces of moisture. A regular schedule for testing should be followed and inspection records maintained. SAFETY WARNING: Before conducting any pressure tests on hose, provision must be made to ensure the safety of the personnel performing the tests and to prevent any possible damage to property. Only trained personnel using proper tools and procedures should conduct any pressure tests. *Woven jacket fire hose should be tested in accordance with the service test provisions contained in the current edition of National Fire Protection Bulletin No.1962 -- Standard for the Care, Use and Service Testing of Fire Hose, Chapter 5.

7. When liquids such as gasoline, oil, solvent, or other hazardous fluids are used as the test fluid, precautions must be taken to protect against fire or other damage should a hose fail and the test liquid be sprayed over the surrounding area. The Rubber Manufacturers Association has published separately a series of Hose Technical information bulletins describing hoses designed for different applications which detail Maintenance, Testing and Inspection recommendation. Reference should be made to the RMA Catalog of Publications, issued annually, to determine the availability of the latest edition. Bulletins published as of January 1987 include the following:

Publication No. IP 11—1—Steam Hose IP 11—2—Anhydrous Ammonia Hose IP 11—4—Oil Suction and Discharge Hose IP 11—5—Welding Hose IP 11—6—Fire Hose IP 11—7—Chemical Hose IP 11—8—Fuel Dispensing Hose

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

119

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Storage Rubber hose products in storage can be affected adversely by temperature, humidity, ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects, rodents and radioactive materials. The appropriate method for storing hose depends to a great extent on its size (diameter and length), the quantity to be stored and the way in which it is packaged. Hose should not be piled or stacked to such an extent that the weight of the stack creates distortions on the length stored at the bottom. Since hose products vary considerably in size, weight and length, it is not practical to establish definite recommendations on this point. Hose having a very light wall will not support as much load as could a hose having a heavier wall or hose having a wire reinforcement. Hose which is shipped in coils or bales should be stored so that the coils are in a horizontal plane. Whenever feasible, rubber hose products should be stored in their original shipping containers, especially when such containers are wooden crates or cardboard cartons which provide some protection against the deteriorating effects of oils, solvents and corrosive liquids; shipping containers also afford some protection against ozone and sunlight. Certain rodents and insects will damage rubber hose products and adequate protection from them should be provided.

Cotton jacketed hose should be protected against fungal growths if the hose is to be stored for prolonged periods in humid conditions in excess of 70%. The ideal temperature for the storage of rubber products ranges for 50º to 70ºF (10-21ºC) with a maximum limit of 100ºF (38ºC). If stored below 32ºF (0ºC), some rubber products become stiff and would require warming before being placed in service. Rubber products should not be stored near sources of heat, such as radiators, base heaters, etc., nor should they be stored under conditions of high or low humidity. To avoid the adverse effects of high ozone concentration, rubber hose products should not be stored near electrical equipment that may generate ozone or be stored for any lengthy period in geographical areas of known high ozone concentration. Exposure to direct or reflected sunlight – even through windows – should also be avoided. Uncovered hose should not be stored under fluorescent or mercury lamps which generate light waves harmful to rubber. Storage areas should be relatively cool and dark, and free of dampness and mildew. Items should be stored on a first-in, first-out basis, since even under the best of conditions, an unusually long shelf life could cause deterioration of certain rubber products.

Decimal and Millimeter Equivalents of Fractions Inches Fractions 1/64 ---------------------------------------1/32 ------------------------3/64 ---------------------------------------1/16 ----------5/64 ---------------------------------------3/32 ------------------------7/64 ---------------------------------------1/8 ------------9/64 ---------------------------------------5/32 ------------------------11/64 -------------------------------------3/16 ----------13/64 -------------------------------------7/32 ------------------------15/64 -------------------------------------1/4 ------------17/64 -------------------------------------9/32 ------------------------19/64 -------------------------------------5/16 ----------21/64 -------------------------------------11/32 ----------------------23/64 -------------------------------------3/8 ------------25/64 -------------------------------------13/32-----------------------27/64--------------------------------------7/16-----------29/64------------------------------------15/32---------------------31/64------------------------------------1/2------------

Decimals .015625 .03125 .046875 .0625 .078125 .09375 .109375 .125 .140625 .15625 .171875 .1875 .203125 .21875 .234375 .250 .265625 .28125 .296875 .3125 .328125 .34375 .359375 .375 .390625 .40625 .421875 .4375 .453125 .46875 .484375 .500

Millimeters .397 .794 1.191 1.588 1.984 2.381 2.778 3.175 3.572 3.969 4.366 4.763 5.159 5.556 5.953 6.350 6.747 7.144 7.541 7.938 8.334 8.731 9.128 9.525 9.922 10.319 10.716 11.113 11.509 11.906 12.303 12.700

Inches Fractions 33/64---------------------------------17/32------------------35/64 --------------------------------9/16 -----37/64 --------------------------------19/32 -----------------39/64 --- ----------------------------5/8 -------41/64 --------------------------------21/32 -----------------43/64---------------------------------11/16 ----45/64 --------------------------------23/32 -----------------47/64 --------------------------------3/4 -------49/64 --------------------------------25/32------------------51/64---------------------------------13/16----53/64---------------------------------27/32------------------55/64 --------------------------------7/8--------57/64---------------------------------29/32------------------59/64---------------------------------15/16----61/64-------------------------------31/32----------------63/64-------------------------------1---------

Decimals .515625 .53125 .546875 .5625 .578125 .59375 .609375 .625 .640625 .65625 .671875 .6875 .703125 .71875 .734375 .750 .765625 .78125 .796875 .8125 .828125 .84375 .859375 .875 .890625 .90625 .921875 .9375 .953125 .96875 .984375 1.000

Millimeters 13.097 13.494 13.891 14.288 14.684 15.081 15.478 15.875 16.272 16.669 17.066 17.463 17.859 18.256 18.653 19.050 19.447 19.844 20.241 20.638 21.034 21.431 21.828 22.225 22.622 23.019 23.416 23.813 24.209 24.606 25.003 25.400

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

120

The Gates Rubber Company

Industrial Hose Products/List Prices

Hose Finder

Rubber hoses are used basically to convey material. They are used for a variety of reasons, but principally for:

• • • • •

Flexibility; allows for changes in alignment, hookup or outlet. Absorbing vibration. Resistance to Corrosive fluids. Resistance to abrasion. Providing a closed system.

In applying any product, the more you know about the application, the better the product you choose to meet the needs of the application. This is particularly true with hose because of the many variables involved. Each type of hose and coupling is designed to give satisfactory, safe service life for a particular application. To obtain this service life, the user should:

• • • •

Select the proper hose and couplings for the application. Take reasonable care of the hose assembly while it is in service. Maintain the hose assembly in good working condition. Observe all applicable safety regulations.

If a hose assembly was incorrectly selected to solve an application problem, there is very little that care and maintenance can do to prolong its service life. It’s very simple: hoses will fail soon regardless of the care and maintenance provided if they are misapplied. To help you select the best hose, remember the word STAMPED:

Size: Inside diameter, outside diameter, length. Temperature: Minimum and maximum ˚F. Applications: How and where used: Special needs, UL, Government, FDA, MSHA, etc.

Material Conveyed: Air, water, chemicals (concentration), petroleum, etc.

Pressure: Maximum rated W.P. (psi) or Suction (In. Hg). Ends: Straight, Male, etc. Delivery: When, where, quantity.

39496-000 June 3, 2002 New

When designing a system with rubber hose, engineering principles regarding materials always apply. Take advantage of the outstanding characteristics of rubber materials listed on Page 6 or 141 and avoid those conditions that shorten hose life. Some of these conditions are:

• • • •

Exposure to higher-than-rated temperatures. Exposure to severe external abuse such as kinking, pulling, excessive bending. Exposure to corrosive fluids to which hose has little resistance. Subjecting hose to higher than rated working pressure/high surge pressure.

The process of selecting hoses from Industrial Hose Products/List Prices #39496-000 or the following Data Pages usually is resolved in one of two ways:

• •

Making the optimum choice from several possible selections for an application. Making the only choice, which satisfies all the requirements of a somewhat special application; i.e., transfer of LP Gas.

Hoses are versatile, and it’s often possible to use one type of hose for several different applications. However, certain specific applications are critical and/or hazardous, and the only type of hose used should be the one Gates recommends for that application. Some of the critical or hazardous applications involving hoses are:

• • • •

Steam. Liquid Petroleum Gas (LPG). Corrosive chemicals. Air Drill operation.

Refer to Industrial Hose Products/List Prices #39496-000 for details of hoses used in these applications. The hoses listed in this Hose Finder may be found in one or more additional Gates catalogs or Market Specifications publications.

The world’s most trusted name in belts, hose and hydraulics.

121

Hose Finder

速

Industrial Hose Products/List Prices

The Data Pages are intended to give you a reference for quickly locating standard line hoses for a given application. Hoses are listed by size (I.D.) and rated working pressure. Pertinent specification information is also provided for each hose. Precautionary Notes Not all of the sizes shown are stock items and may require minimum order quantities. In addition, many of the larger diameter hoses (water, material handling, etc.) are made to order. For availability, delivery and pricing information refer to your Industrial Hose Products/List Prices #39496000, Customer Service Representative in Denver or your local Gates Representative.

122

速

The Gates Rubber Company

39496-000 June 3, 2002 New

Industrial Hose Products/List Prices

Hose Finder

Explanation of Column Headings 1. 2. 3.

5. 6.

How to Select a Hose From the Data Pages

Hose I.D. (In.) — This is the nominal hose inside diameter in inches (See Page 118 for tolerances). Hose Name — This is the hose identification shown in the catalog. For some special hoses, it may be a number, not a name. Rated Working Pressure (psi) — This is the design working pressure and is based on a certain percentage of the hose burst value. It varies with hose type and intended application. Suction (In. Hg) — This is the vacuum rating of the hose when used in suction applications at ambient temperatures, and not bent beyond the minimum bend radius Hose O.D. — The outside diameter (See Page 118 for tolerances). Tube — For reference, the Gates Rubber type identification is given and the color used on that particular hose. Refer to Page 6 or 141 for a description of these stocks. Oil Resistance — RMA Oil Resistance rating is listed: High = High Med. = Medium Low = Low > 100% swell – = Not Rated. Cover — Same information for tube stock. Color Abbreviations: Beige – Beige Blk – Black Blu – Blue Bur – Burgundy Clear – Clear Gld – Gold Grn – Green

39496-000 June 3, 2002 New

Gry – Gray Nat – Natural Org – Orange Red – Red Tan – Tan Wht – White Yel – Yellow

Example 1 Given: A customer wants a 3/4Ǝ I.D. x 20ƍ hose to handle air or water and general purpose applications. Temperatures are ambient, a pressure rating up to 300 psi is required and it must have textile reinforcement with a high oil resistant tube. Turn to Page 127 and 128 for the listing of 3/4Ǝ I.D. hoses. In the Rated Working Pressure column, you will find the 300 psi figures. NOTE: Several hoses have a 300 psi rating or higher. But, the ones with textile reinforcement and high oil resistance that are multi-purpose are 19B, 119B or Premo Flex® hoses. All of these hoses could be suitable for the application. Refer to corresponding catalog page number for specific hose details and coupling recommendations. Example 2 Given: 6Ǝ x 50ƍ dry powder food grade transfer hose is needed. The hose requirements are: full suction, 50 psi and a temperature of 100 ˚F. Turn to Page 138 for the listing of 6Ǝ I.D. hoses. In the Rated Working Pressure column, you will find the 50 psi rating or higher. The two hoses with 50 psi and full suction ratings and suitable for bulk food transfer are 690SB and 692SB. Refer to corresponding catalog page number for specific hose details and coupling recommendations.

Refer to Catalog #39496-000 for description of any special cover stripes. 8.

Hose Weight (lb/ft) — This is approximate measurement per current specification. 9. Minimum Bend Radius – This is the smallest radius in inches around which a hose can be bent without overstressing components, without collapsing the hose wall and without substantially reducing fluid flow. 10. Hose Temperature Range – Includes maximum and minimum temperatures of each hose listed. 11. Hose Category — This is a listing of hose types as indicated in the Table of Contents on Page 1 of the Industrial Hose Products/List Prices #39496-000. Most hoses are not limited to these applications only. ®

The world’s most trusted name in belts, hose and hydraulics.

123

Hose Finder

Industrial Hose Products/List Prices

Data Pages

124

30.0 30.0 28.0 28.0 28.0 28.0 28.0 28.0 30.0 30.0 30.0 30.0 30.0 30.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 24.0 30.0 30.0 30.0 30.0 30.0

– – High High

– – Low Low High High Med Low Low Low Low Med. High

– Low Med. High High High High High High High High High High High High

– Med. High

– High

– – – – – – – Low High High Med. High

C2 A C2 C2 C2 A P P A C2 B2 P P P P B2 C2 G P B2 C C C C C C C C C C C C G B2 C2 A C2 A C4 M C2 C2 C2 C2 C2 C2 P A C2 B2 C2

Blk Blk Red Red Blk Blk Red Blk Blk Red Red Red Blk Red Blk Red Red Clear Red Red Blk Blu Red Yel Grn Gry Blk Blu Red Yel Grn Gry Red Red Red Blk Red Blk Yel Gld Blk Blu Gry Yel Blk Blk Red Blk Red Red Red

3.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.0 2.0

– 3.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 0.6 3.0 2.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 4.0 4.0 4.0 3.0 3.0 3.0 3.0 3.0 2.0

The Gates Rubber Company

0.06 0.08 0.07 0.07 0.09 0.11 0.08 0.08 0.09 0.09 0.09 0.08 0.08 0.16 0.15 0.07 0.09 0.07 0.09 0.12 0.09 0.09 0.09 0.09 0.09 0.09 0.11 0.11 0.11 0.11 0.11 0.11 0.06 0.15 0.12 0.12 0.14 0.09 0.12 0.22 0.15 0.15 0.15 0.15 0.25 0.10 0.09 0.13 0.13 0.14 0.10

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Clear Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Tan Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk

Type

C A C C C A P P C C B P P P P B C G P B C C C C C C C C C C C C G B C C C Z C A C C C C C C P C C B C

Oil Resistance

0.41 0.44 0.44 0.43 0.50 0.53 0.47 0.47 0.50 0.50 0.50 0.47 0.47 0.62 0.62 0.47 0.50 0.47 0.49 0.57 0.47 0.47 0.47 0.47 0.47 0.47 0.54 0.54 0.54 0.54 0.54 0.54 0.47 0.62 0.57 0.56 0.62 0.52 0.57 0.63 0.53 0.53 0.53 0.53 0.59 0.56 0.53 0.62 0.62 0.62 0.56

Cover

-40ºF -30ºF -40ºF -40ºF -40ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -20ºF -20ºF -20ºF -20ºF -20ºF -15ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

–

Color

Suction (In. Hg.) 24.0 30.0 30.0 30.0 24.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

Type

Premo Flex 19B Plant Master 4219G LPG Vapor Adapta Flex Adapta Flex 119B Plant Master 19B Plant Master 6B Dura Master Adapta Flex Adapta Flex Adapta Flex Adapta Flex Duro Flex Premo Flex Tufflex Food Adapta Flex Duro Flex LOL Plus LOL Plus LOL Plus LOL Plus 1/4 LOL Plus LOL Plus Python Plus Python Plus Python Plus Python Plus Python Plus Python Plus Tufflex GP 6B Dura Master Premo Flex LP350 19B Plant Master 77B Terminator 319MB PowerClean 3500 PowerClean 3500 PowerClean 3500 PowerClean 3500 PowerClean 6000 4219G Adapta Flex 5/16 119B Plant Master 19B Plant Master 6B Dura Master Premo Flex

50 125 250 500 50 125 200 200 250 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 315 315 350 500 500 501 1000 3500 3500 3500 3500 6000 50 200 250 250 250 250

Hose O.D. (In.)

4219G

3/16 LPG Vapor

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

+257ºF +150ºF +212ºF +212ºF +257ºF +150ºF +200ºF +200ºF +212ºF +212ºF +200ºF +200ºF +200ºF +200ºF +200ºF +200ºF +212ºF +130ºF +200ºF +200ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +200ºF +212ºF +180ºF +212ºF +150ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +200ºF +212ºF +212ºF +200ºF +212ºF

Special Applications Petroleum Transfer Multi-Purpose Multi-Purpose Special Applications Petroleum Transfer Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Food & Beverage Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Petroleum Transfer Multi-Purpose Special Applications Multi-Purpose Multi-Purpose Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Special Applications Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose

Catalog Page No. 86 73 45 40 86 73 48 & 49 50 41 40 46 48 50 48 50 47 45 31 48 47 43 43 43 43 43 43 44 44 44 44 44 44 52 46 45 72 40 89 42 55 81 81 81 81 82 86 48 41 40 46 45

Hose Finder

Industrial Hose Products/List Prices

Data Pages

30.0 30.0

– 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 28.0 28.0 28.0 28.0 28.0 28.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 25.0 30.0 30.0 30.0 30.0 30.0 25.0 25.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

High High

– – – Low Low

– High High

– – Med. Low Low Med. High Low Low Low Low Med. High High High High High High

– High High High High High High

– Med. High

– High

– – – – – – – – –

C2 C2 A C2 A P P G A C2 P2 B1 B2 P P B2 C2 P P P P B2 C C C C C C P C C C C C C G B2 C2 A C2 A C4 G G M C2 A C2 C2 C2 C2

Red Red Blk Blk Blk Red Blk Clear Blk Red Blk Red Red Red Blk Red Red Red Blu Grn Yel Red Blk Blu Red Yel Grn Gry Red Blk Blu Red Yel Grn Gry Red Red Red Blk Red Blk Yel Yel Grn Gld Yel Blk Blk Blu Gry Yel

2.0 3.0 3.0 4.0 3.0 3.0 3.0

– 3.0 3.0

– 4.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 1.0 3.0 3.0 3.0 3.0 3.0 3.0 4.0 4.0 3.0 4.0 4.0 5.0 5.0 5.0 5.0

0.16 0.17 0.11 0.12 0.14 0.14 0.14 0.09 0.15 0.15 0.26 0.30 0.16 0.14 0.14 0.14 0.14 0.15 0.15 0.15 0.15 0.18 0.11 0.11 0.11 0.11 0.11 0.11 0.19 0.15 0.15 0.15 0.15 0.15 0.15 0.10 0.20 0.18 0.16 0.18 0.14 0.19 0.12 0.14 0.31 0.18 0.19 0.23 0.23 0.23 0.23

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Blk Blk Tan Blk Blk Blk Blk Clear Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Grn Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Tan Blk Yel Grn Blk Blk Blk Blk Blk Blk Blk

Type

C C Z C A P P G C C P2 P2 B P P B C P P P P B C C C C C C P C C C C C C G B C C C Z C G G A C2 C C C C C

Oil Resistance

0.67 0.69 0.59 0.62 0.66 0.66 0.66 0.63 0.69 0.69 0.78 0.80 0.69 0.66 0.66 0.66 0.66 0.67 0.67 0.67 0.67 0.73 0.63 0.63 0.63 0.63 0.63 0.63 0.75 0.68 0.68 0.68 0.68 0.68 0.68 0.62 0.75 0.73 0.70 0.75 0.67 0.75 0.67 0.69 0.77 0.73 0.75 0.68 0.68 0.68 0.68

Cover

-40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -20ºF -20ºF -20ºF -20ºF -20ºF -20ºF -15ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

–

Color

30.0 30.0 30.0 24.0 25.0 30.0 30.0

Type

315 500 500 50 125 200 200 200 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 315 315 350 500 500 501 570 800 1000 1000 1125 3000 3000 3000 3000

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

Premo Flex 5/16 19B Plant Master 77B 4219G LPG Vapor Adapta Flex Adapta Flex Tufflex Food 119B Plant Master 19B Plant Master 205MB Steam King 232MB Steam Queen 6B Dura Master Adapta Flex Adapta Flex Duro Flex Premo Flex Adapta Flex Adapta Flex Adapta Flex Adapta Flex Duro Flex LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus 3/8 LOL Plus Ohmega Python Plus Python Plus Python Plus Python Plus Python Plus Python Plus Tufflex GP 6B Dura Master Premo Flex LP350 19B Plant Master 77B Terminator Thermo AG 570 Thermo AG 800 319MB Cyclone 33HB Diver's Air PowerClean 3000 PowerClean 3000 PowerClean 3000 PowerClean 3000

39496-000 June 3, 2002 New

Hose Categories

+212ºF +212ºF +150ºF +257ºF +150ºF +200ºF +200ºF +130ºF +212ºF +212ºF +450ºF +450ºF +200ºF +200ºF +200ºF +200ºF +212ºF +200ºF +200ºF +200ºF +200ºF +200ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +200ºF +212ºF +180ºF +212ºF +150ºF +212ºF +130ºF +130ºF +212ºF +212ºF +120ºF +212ºF +212ºF +212ºF +212ºF

Multi-Purpose Multi-Purpose Special Applications Special Applications Petroleum Transfer Multi-Purpose Multi-Purpose Food & Beverage Multi-Purpose Multi-Purpose Steam Steam Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Special Applications Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Petroleum Transfer Multi-Purpose Special Applications Multi-Purpose Special Applications Special Applications Multi-Purpose Water Special Applications Pressure Washer Pressure Washer Pressure Washer Pressure Washer

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 45 40 89 86 73 48 & 49 50 31 41 40 93 94 46 48 50 47 45 48 51 51 51 47 43 43 43 43 43 43 90 44 44 44 44 44 44 52 46 45 72 40 89 42 83 84 55 106 85 81 81 81 81

125

Hose Finder

Industrial Hose Products/List Prices

Data Pages

126

Low Low

– High High

– – Med. Low Low Med. High Low Low Low Low Med. High High High High High High

– High High High High High High

– Med. High

– High High

– – –

Blk Blu Gry Yel Blk Blu Gry Yel Blk Wht Blk/Yel Wht Red Blk Clear Blk Red Blk Red Red Red Blk Red Red Red Blu Grn Yel Red Blk Blu Red Yel Grn Gry Red Blk Blu Red Yel Grn Gry Red Red Red Blk Red Yel Yel Blk Grn

5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0

– 5.0 5.0

– 7.0 5.0 5.0 5.0 4.0 4.0 5.0 5.0 5.0 5.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1.3 5.0 4.0 5.0 5.0 5.0 5.0 5.0 5.0

The Gates Rubber Company

0.23 0.23 0.23 0.23 0.35 0.35 0.35 0.35 0.17 0.32 0.55 0.28 0.20 0.19 0.14 0.21 0.20 0.40 0.45 0.21 0.20 0.19 0.19 0.22 0.20 0.19 0.19 0.20 0.25 0.15 0.15 0.15 0.15 0.15 0.15 0.24 0.18 0.18 0.18 0.18 0.18 0.18 0.15 0.25 0.24 0.22 0.23 0.25 0.17 0.23 0.18

Min.

C2 C2 C2 C2 C2 C2 C2 C2 C2 C D P P P G A C2 P2 B1 B2 P P B2 C2 P P P P B2 C C C C C C P C C C C C C G B2 C2 A C2 C4 G A G

Hose Wt. (Lbs./Ft.)

Oil Resistance

– – – – – – – – – – – –

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF 0ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -20ºF -20ºF -20ºF -20ºF -20ºF -20ºF -15ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -10ºF

Max.

25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 28.0 28.0 28.0 28.0 28.0 28.0 25.0 30.0 30.0 30.0 30.0 30.0 30.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0

Blk Blk Blk Blk Blk Blk Blk Blk Blk Wht Blk Blk Blk Blk Clear Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Grn Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Yel Tan Grn

Min. Bend Radius (In.)

–

C C C C C C C C C C D3 P P P G C C P2 P2 B P P B C P P P P B C C C C C C P C C C C C C G B C C C C G Z G

Temp (ºF)

Color/Stripe

25.0 25.0

0.68 0.68 0.68 0.68 0.74 0.74 0.74 0.74 0.78 0.95 1.23 0.91 0.81 0.81 0.75 0.84 0.84 1.06 1.02 0.84 0.81 0.81 0.81 0.85 0.81 0.81 0.81 0.81 0.88 0.77 0.77 0.77 0.77 0.77 0.77 0.88 0.81 0.81 0.81 0.81 0.81 0.81 0.77 0.88 0.88 0.84 0.88 0.89 0.81 0.87 0.84

Cover

Type

–

Color

Suction (In. Hg.) 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 10.0 20.0 25.0 25.0 25.0 25.0

Type

1/2

4000 4000 4000 4000 5000 5000 5000 5000 35 100 150 200 200 200 200 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 315 315 350 500 501 570 750 800

Hose O.D. (In.)

3/8

PowerClean 4000 PowerClean 4000 PowerClean 4000 PowerClean 4000 PowerClean 5000 PowerClean 5000 PowerClean 5000 PowerClean 5000 4219G Heat Master-Kevlar 429W Sandblast 113S Adapta Flex Adapta Flex Tufflex Food 119B Plant Master 19B Plant Master 205MB Steam King 232MB Steam Queen 6B Dura Master Adapta Flex Adapta Flex Duro Flex Premo Flex Adapta Flex Adapta Flex Adapta Flex Adapta Flex Duro Flex LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus Ohmega Python Plus Python Plus Python Plus Python Plus Python Plus Python Plus Tufflex GP 6B Dura Master Premo Flex LP350 19B Plant Master Terminator Thermo AG 570 77B Thermo AG 800

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

+212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +300ºF +150ºF +212ºF +200ºF +200ºF +130ºF +212ºF +212ºF +450ºF +450ºF +200ºF +200ºF +200ºF +200ºF +212ºF +200ºF +200ºF +200ºF +200ºF +200ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +200ºF +212ºF +180ºF +212ºF +212ºF +130ºF +150ºF +130ºF

Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Special Applications Food & Beverage Material Handling Water Multi-Purpose Multi-Purpose Food & Beverage Multi-Purpose Multi-Purpose Steam Steam Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Special Applications Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Petroleum Transfer Multi-Purpose Multi-Purpose Special Applications Special Applications Special Applications

Catalog Page No. 81 81 81 81 82 82 82 82 86 32 33 105 48 & 49 50 31 41 40 93 94 46 48 50 47 45 48 51 51 51 47 43 43 43 43 43 43 90 44 44 44 44 44 44 52 46 45 72 40 42 83 89 84

Hose Finder

Industrial Hose Products/List Prices

Data Pages

20.0 20.0 20.0 20.0 20.0 20.0 28.0 28.0 28.0 28.0 28.0 28.0 20.0 20.0 20.0 5.0 15.0 5.0 15.0 20.0 20.0 15.0 30.0 30.0 30.0

– 15.0 15.0 15.0 30.0 20.0

– – – – – – – – – – – – – – – – – Low Low

– High High Low Med. High Med. High High High High High High

– High High

– – – – – – – – – – – – Low Low

– –

C4 M A C2 C2 C2 C2 C2 C2 C2 C2 C2

– C2 C2 C2 J P P G A C2 P B2 C2 B2 C C C C C C G C2 C2

– A P C C2 C2 D J P C2 G P P P P P

Yel Gld Blk Yel Blk Blu Gry Yel Blk Blu Gry Yel

5.0 5.0 5.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 1.0 6.0 6.0 6.0 6.0 6.0 6.0

– Blk Blk Blk Blk Red Blk Clear Blk Red Red Red Red Red Blk Blu Red Yel Grn Gry Red Red Red

– 6.0 6.0 6.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 2.5 5.0 6.0 1.0 1.0 6.0 6.0 6.0 6.0 8.0 6.0 3.0 2.0

– Blk Blk/Blk Wht Blk Blk Blk/Yel Blk Yel/Grn Wht/Bur Clear Wht Red Blk Blk/Org Blk/Org

– 6.0 6.0 6.0 4.0 4.0

0.29 0.42 0.29 0.29 0.28 0.28 0.28 0.28 0.42 0.42 0.42 0.42 0.10 0.24 0.29 0.33 0.37 0.24 0.23 0.16 0.23 0.22 0.24 0.27 0.27 0.27 0.20 0.20 0.20 0.20 0.20 0.20 0.21 0.27 0.27 0.11 0.18 0.37 0.47 0.35 0.41 0.70 0.42 0.50 0.65 0.21 0.49 0.30 0.29 0.45 0.53

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Clear Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Wht Blk Blk Blk Blk Blk Wht Clear Blk Blk Blk Tan Tan

Type

P A C C2 C C C C C C C C A C C C C P P G C C P B C B C C C C C C G C C A A P C C C D3 C P C2 G P P P K K

Oil Resistance

0.84 0.92 0.94 0.94 0.80 0.80 0.80 0.80 0.86 0.86 0.86 0.86 0.85 0.94 1.00 1.04 1.00 0.93 0.93 0.88 0.94 0.94 0.93 0.98 0.98 0.98 0.94 0.94 0.94 0.94 0.94 0.94 0.93 0.98 1.00 0.97 0.97 1.17 1.23 1.14 1.19 1.50 1.13 1.27 1.33 1.03 1.25 1.08 1.08 1.25 1.36

Cover

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -15ºF -40ºF -40ºF -40ºF -40ºF -40ºF 0ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

3/4

–

Color

5/8

30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 5.0 10.0 20.0 20.0 30.0 20.0 20.0

Type

1/2

1000 1000 1000 1000 2500 2500 2500 2500 4000 4000 4000 4000 10 35 125 125 150 200 200 200 250 250 250 250 250 300 300 300 300 300 300 300 300 315 500 10 20 80 100 125 125 150 150 150 150 150 200 200 200 200 200

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

1000 MP/Mine Spray 319MB 33HB Diver's Air Cyclone PowerClean 2500 PowerClean 2500 PowerClean 2500 PowerClean 2500 PowerClean 4000 PowerClean 4000 PowerClean 4000 PowerClean 4000 63SB 4219G 24B-1 24B-2 Blacksnake Adapta Flex Adapta Flex Tufflex Food 119B Plant Master 19B Plant Master Adapta Flex Duro Flex Premo Flex Duro Flex LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus Tufflex GP Premo Flex 19B Plant Master 63SB 163SB 75W Heat Master-Kvlr 24B-1 24B-2 429W Sandblast Blacksnake Colt Food Master Lite Tufflex Food 113S Adapta Flex Adapta Flex Mustang 45HW Mustang 45HW-CR

39496-000 June 3, 2002 New

Hose Categories

+212ºF +212ºF +120ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +120ºF +120ºF +120ºF +200ºF +200ºF +130ºF +212ºF +212ºF +200ºF +200ºF +212ºF +200ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +212ºF +212ºF +212ºF +212ºF +257ºF +300ºF +120ºF +120ºF +150ºF +120ºF +250ºF +230ºF +130ºF +212ºF +200ºF +200ºF +250ºF +250ºF

Multi-Purpose Multi-Purpose Special Applications Water Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Pressure Washer Air Drill / Air Duct Special Applications Petroleum Transfer Petroleum Transfer Petroleum Transfer Multi-Purpose Multi-Purpose Food & Beverage Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Air Drill / Air Duct Air Drill / Air Duct Water Food & Beverage Petroleum Transfer Petroleum Transfer Material Handling Petroleum Transfer Acid Chemical Food & Beverage Food & Beverage Water Multi-Purpose Multi-Purpose Acid Chemical Acid Chemical

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 53 55 85 106 81 81 81 81 82 82 82 82 18 86 75 75 76 48 & 49 50 31 41 40 48 47 45 47 43 43 43 43 43 43 52 45 40 18 19 98 32 75 75 33 76 16 26 31 105 48 & 49 50 10 11

127

Hose Finder

Industrial Hose Products/List Prices

Data Pages

7/8

128

200 200 200 250 250 250 250 250 250 250 250 250 250 250 300 300 300 300 300 300 300 300 300 300 300 300 315 315 350 500 500 500 500 501 570 750 800 1000 1000 1000 10 75 175 10 20 40 50 80 90 100 100

– 20.0 20.0 20.0 20.0 20.0 30.0 30.0 20.0 15.0 15.0 15.0 15.0 20.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 20.0 20.0 20.0 25.0 20.0 25.0 25.0 15.0 25.0 25.0 25.0 25.0 25.0 30.0 5.0 5.0 10.0 5.0 15.0 28.0 20.0 28.0 28.0 25.0 28.0

1.22 L/K Clear 1.29 T Wht 1.33 T Wht 1.09 C Blk 1.09 C Blk 1.28 P2 Blk 1.27 P2 Blk 1.09 B Blk 1.13 P Blk 1.13 P Blk 1.15 B Blk 1.22 S Wht 1.22 S Wht 1.15 C Blk 1.13 P Blk 1.13 P Blk 1.13 P Blk 1.13 P Blk 1.15 B Blk 1.06 C Blk 1.06 C Blk 1.06 C Blk 1.06 C Blk 1.06 C Blk 1.06 C Blk 1.07 G Blk 1.19 B Blk 1.19 C Blk 1.23 C Blk 1.28 A Blk 1.19 C Blk 1.11 C Blk 1.11 C Blk 1.22 C Blk 1.08 G Yel 1.16 Z Tan 1.41 G Grn 1.10 P Blk 1.21 A Blk 1.20 C2 Blk 1.02 A Blk 1.30 P Blk 1.40 P Blk 1.15 A Blk 1.22 A Blk 1.26 G Clear 1.39 D3 Blk 1.34 P Blk 1.27 G Grn 1.47 C Blk 1.29 G Clear

– – – High High

– – Med. Low Low Med.

– – High Low Low Low Low Med. High High High High High High

– Med. High

– – High

– – – – – – – – – – – – –

P P P A C2 P2 B1 B2 P P B2 P P C2 P P P P B2 C C C C C C G B2 C2 A D3 C2 D3 C4 C4 G A G C4 M C2

Grn/Yel Blu/Red Blu/Red Blk Red Blk Red Red Red Blk Red Wht/Bur Gry/Bur Red Red Blu Grn Yel Red Blk Blu Red Yel Grn Gry Red Red Red Blk Gry/Yel Red Blk/Yel Yel/Blk Yel Yel Blk Grn Yel Gld Yel

–

P P

Blk/Blk Blk/Blk

–

Med.

A G D G

–

Med.

–

– Blk Clear Blk/Gry Grn/Blk

– Blk

–

4.0 4.0 4.0 6.0 6.0

– 9.0 6.0 6.0 6.0 5.0 2.0 2.0 5.0 6.0 6.0 6.0 6.0 5.0 7.0 7.0 7.0 7.0 7.0 7.0 2.5 6.0 5.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 6.0 1.0 7.0 8.0 1.0 1.0 2.0 5.0 4.0 3.0 3.0 3.0

The Gates Rubber Company

0.41 0.52 0.53 0.29 0.28 0.49 0.60 0.29 0.35 0.34 0.36 0.42 0.42 0.36 0.35 0.34 0.34 0.34 0.36 0.24 0.24 0.24 0.24 0.24 0.24 0.25 0.40 0.40 0.44 0.60 0.38 0.41 0.41 0.42 0.27 0.35 0.30 0.43 0.60 0.41 0.14 0.42 0.53 0.16 0.23 0.14 0.49 0.20 0.28 0.51 0.28

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

Hose O.D. (In.)

Suction (In. Hg.) 30.0 30.0 20.0 20.0 20.0

Cover

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -15ºF -40ºF -40ºF -40ºF -30ºF -40ºF -30ºF -30ºF -40ºF -10ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -10ºF -40ºF -30ºF -10ºF -40ºF -10ºF

Max.

3/4

Renegade Stallion Stallion - CR 119B Plant Master 19B Plant Master 205MB Steam King 232MB Steam Queen 6B Dura Master Adapta Flex Adapta Flex Duro Flex Food & Bev Master Food & Bev Master Premo Flex Adapta Flex Adapta Flex Adapta Flex Adapta Flex Duro Flex LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus LOL Plus Tufflex GP 6B Dura Master Premo Flex LP350 18MB 19B Plant Master 500 MP/Air Drill 500 MP/Air Drill Terminator Thermo AG 570 77B Thermo AG 800 1000 MP/Mine Spray 319MB Cyclone 63SB 75W 76W 63SB 163SB MF 201CR 770SB MF 300 EPDM MF 100GR 4684CF MF 101CL

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

+212ºF +300ºF +300ºF +212ºF +212ºF +450ºF +450ºF +200ºF +200ºF +200ºF +200ºF +230ºF +230ºF +212ºF +200ºF +200ºF +200ºF +200ºF +200ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +150ºF +200ºF +212ºF +180ºF +212ºF +212ºF +212ºF +212ºF +212ºF +130ºF +150ºF +130ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF +212ºF +212ºF +130ºF +150ºF +140ºF +130ºF +212ºF +130ºF

Acid Chemical Acid Chemical Acid Chemical Multi-Purpose Multi-Purpose Steam Steam Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Food & Beverage Food & Beverage Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Special Applications Special Applications Special Applications Multi-Purpose Multi-Purpose Water Air Drill / Air Duct Water Water Air Drill / Air Duct Air Drill / Air Duct Food & Beverage Material Handling Material Handling Water Special Applications Water

Catalog Page No. 15 13 14 41 40 93 94 46 48 50 47 28 28 45 48 51 51 51 47 43 43 43 43 43 43 52 46 45 72 17 40 56 56 42 83 89 84 53 55 106 18 98 99 18 19 23 39 37 103 88 104

Hose Finder

Industrial Hose Products/List Prices

Data Pages

28.0 25.0 10.0

– 10.0 5.0 5.0 10.0 10.0 30.0 30.0 30.0 30.0 25.0 30.0 10.0 15.0 10.0 10.0 10.0 30.0 30.0 20.0 30.0 30.0 20.0 10.0 10.0 10.0

– 20.0 30.0 30.0 10.0 30.0 30.0 10.0 10.0 15.0 20.0 15.0 25.0 20.0 25.0 25.0 10.0 25.0 25.0 25.0 10.0 10.0

– – – – – – – Low Low

– – – – – – – – Med. Low Low

– – – – – – – High High

– – – – Med.

– – High Low

– Med.

– – High

– – Med.

– –

G J C2 G P D D P P P P C2 A D D P P B2 P P P P P P P P C2 A C2 P2 B1 P P B2 P P C2 P G B2 A D3 C2 D3 C4 C4 C4 M A P P

Clear Blk Blk Clear Blk/Blk Blk/Yel Blk/Yel Red Blk Blk/Grn Yel/Grn Wht/Bur Blk/Red Blk/Grn Blk/Blu Blk/Blk Wht Red Red Blk Blk/Org Grn/Org Blk/Org Grn/Yel Blu/Red Blu/Red Red Blk Red Blk Red Wht/Bur Wht/Bur Red Wht/Bur Gry/Bur Red Red Red Red Blk Gry/Yel Red Blk/Yel Yel/Blkl Yel Yel Gld Blk Blk/Blk Blk/Blk

3.0 5.0 8.0

– 8.0 12.0 12.0 8.0 8.0 5.0 3.5 3.0 3.0 5.0 3.0 8.0 8.0 8.0 8.0 8.0 5.0 5.0 5.0 5.0 5.0 5.0 8.0 8.0 8.0

– 11.0 3.0 3.0 8.0 3.0 3.0 8.0 8.0 3.5 8.0 8.0 8.0 8.0 8.0 8.0 8.0 11.0 11.0 4.0 8.0 8.0

0.30 0.65 0.54 0.32 0.46 0.70 1.01 0.46 0.44 0.39 0.61 0.79 0.59 0.53 0.52 0.59 0.65 0.39 0.46 0.44 0.56 0.56 0.64 0.51 0.63 0.63 0.55 0.42 0.41 0.78 0.73 0.52 0.52 0.54 0.52 0.52 0.54 0.57 0.31 0.59 0.60 0.80 0.55 0.66 0.66 0.57 0.65 0.77 0.56 0.51 0.65

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

1.29 G Clear 1.50 C Blk 1.46 C Blk 1.31 G Clear 1.42 P Blk 1.63 D3 Blk 1.87 D3 Blk 1.39 P Blk 1.39 P Blk 1.33 P Blk 1.52 P Blk 1.58 C2 Wht 1.50 C Blk 1.45 P Blk 1.42 C Blk 1.52 P Blk 1.52 P Blk 1.35 B Blk 1.39 P Blk 1.39 P Blk 1.50 K Tan 1.50 K Tan 1.61 K Tan 1.47 L/K Clear 1.56 T Wht 1.58 T Wht 1.50 C Blk 1.38 C Blk 1.38 C Blk 1.63 P2 Blk 1.52 P2 Blk 1.48 S Wht 1.48 S Wht 1.47 B Blk 1.48 S Wht 1.48 S Wht 1.47 C Blk 1.47 P Blk 1.37 G Blk 1.50 B Blk 1.51 C Blk 1.55 A Blk 1.50 C Blk 1.44 C Blk 1.44 C Blk 1.51 C Blk 1.42 P Blk 1.46 A Blk 1.60 C Blk 1.55 P Blk 1.65 P Blk

Cover

-10ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -15ºF -40ºF -40ºF -30ºF -40ºF -30ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

100 125 125 125 140 150 150 150 150 150 150 150 150 150 150 175 200 200 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 300 300 315 350 500 500 500 500 501 1000 1000 100 125 175

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

MF 200CL 124HW 24B-2 Tufflex Food 75W 429W Sandblast 429W Sandblast Adapta Flex Adapta Flex Barracuda Colt Food Master Lite Longhorn – SC Shark Super-Vac 76W 113S 6B Dura Master Adapta Flex Adapta Flex Mustang 45HW Mustang 45HW Mustang 45HW-CR Renegade Stallion 1 Stallion - CR Wagon Master 119B Plant Master 19B Plant Master 205MB Steam King 232MB Steam Queen Brew Master Cellar Master Duro Flex Food & Bev Master Food & Bev Master Premo Flex Adapta Flex Tufflex GP 6B Dura Master LP350 18MB 19B Plant Master 500 MP/Air Drill 500 MP/Air Drill Terminator 1000 MP/Mine Spray 319MB 4684CF 1-1/8 75W 76W

39496-000 June 3, 2002 New

Hose Categories

+130ºF +120ºF +120ºF +130ºF +257ºF +150ºF +150ºF +200ºF +200ºF +180ºF +250ºF +230ºF +180ºF +180ºF +150ºF +257ºF +212ºF +200ºF +200ºF +200ºF +250ºF +250ºF +250ºF +212ºF +300ºF +300ºF +180ºF +212ºF +212ºF +450ºF +450ºF +230ºF +230ºF +200ºF +230ºF +230ºF +212ºF +200ºF +150ºF +200ºF +180ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF

Food & Beverage Petroleum Transfer Petroleum Transfer Food & Beverage Water Material Handling Material Handling Multi-Purpose Multi-Purpose Water Acid Chemical Food & Beverage Petroleum Transfer Water Petroleum Transfer Water Water Multi-Purpose Multi-Purpose Multi-Purpose Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Petroleum Transfer Multi-Purpose Multi-Purpose Steam Steam Food & Beverage Food & Beverage Multi-Purpose Food & Beverage Food & Beverage Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Special Applications Water Water

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 22 77 75 31 98 33 33 48 50 102 16 26 65 101 71 99 105 46 48 & 49 50 10 10 11 15 13 14 74 41 40 93 94 29 30 47 28 28 45 48 52 46 72 17 40 56 56 42 53 55 88 98 99

129

Hose Finder

Industrial Hose Products/List Prices

Data Pages

130

10.0 5.0 30.0 30.0

– 30.0 25.0 30.0 10.0 30.0 30.0 10.0 10.0 10.0

– 10.0 30.0 30.0 10.0 10.0 10.0 15.0 10.0 15.0 15.0 10.0 20.0 20.0 5.0 15.0 30.0 25.0 5.0 10.0 10.0 10.0 10.0 28.0 5.0 15.0

– – – – Med.

– – – Med.

– – – – – – – – – – Med.

– – – High High

– Low

– – Med. High

– – High

– – – – Med. Med.

– – – High High

– – –

– A D G G

– – G A P G P D P P P A D D B2 P P C2 A C2 P2 P P P B2 C2 C2 D3 C2 D3 C4 C4 C4 M

Clear Blk Blk/Blk Clear Blk/Blk Blk/Yel Blk/Grn Yel/Grn Blk/Grn Blk/Red Blk/Grn Blk/Blu Red Blk/Org Grn/Yel Red Blk Red Blk Blk Wht/Bur Wht/Bur Red Red Blk Gry/Yel Red Blk/Yel Yel/Blk Yel Yel Gld

– Blk Blk Blk Blk/Blk Blk/Blk Red Red Red

– – A

– – Blk

– 10.0 12.0 5.0 4.0

– 4.0 6.0 3.0 10.0 6.0 6.0 10.0 10.0 10.0

– 10.0 4.0 4.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 16.0 16.0 1.5 1.5 5.0 4.0 12.0 12.0 10.0 10.0 10.0 1.5 1.5 3.0

The Gates Rubber Company

0.20 0.31 0.59 0.31 0.30 0.34 0.35 0.38 0.61 0.55 0.61 0.71 1.22 0.51 0.77 0.37 0.71 0.68 0.67 0.67 0.66 0.60 0.67 0.69 0.67 1.04 0.68 0.78 0.78 0.67 0.67 0.89 0.95 0.67 0.86 0.86 0.73 0.80 0.87 0.22 0.34 0.39 0.66 0.60 0.77 0.71 0.71 0.73 0.36 0.24 0.36

Min.

1.5 1.5 5.0 3.0 5.0 4.0 4.0 4.0 4.0 12.0

– –

– A Tex. A P P C2 C2 C2

– Blk Blk/Gry Clear Grn/Blk

Hose Wt. (Lbs./Ft.)

Type

Oil Resistance

Color

Type

1.40 A Blk 1.47 A Blk 1.64 D3 Blk 1.61 G Clear 1.61 P Blk 1.53 G Grn 1.56 G Clear 1.56 G Clear 1.72 C Blk 1.67 P Blk 1.75 G Clear 1.77 P Blk 2.16 D3 Blk 1.61 P Blk 1.79 P Blk 1.53 P Blk 1.75 C Blk 1.71 P Blk 1.68 C Blk 1.73 B Blk 1.75 K Tan 1.72 L/K Clear 1.75 C Blk 1.75 C Blk 1.75 C Blk 1.92 P2 Blk 1.73 P Blk 1.88 S Wht 1.88 S Wht 1.73 B Blk 1.75 C Blk 1.85 C Blk 1.80 A Blk 1.75 C Blk 1.74 C Blk 1.74 C Blk 1.78 C Blk 1.69 P Blk 1.69 A Blk 1.52 A Blk 1.60 A Blk 1.64 C Blk 1.85 C Blk 1.80 P Blk 1.90 P Blk 1.87 C Blk 1.87 C Blk 1.88 C Blk 1.88 G Clr 1.65 A Blk 1.79 A Blk

-40ºF -40ºF -40ºF -10ºF -30ºF -10ºF -10ºF -10ºF -40ºF -40ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -30ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -40ºF -40ºF -30ºF -40ºF -40ºF

Max.

–

Hose O.D. (In.)

Suction (In. Hg.) 5.0 15.0 20.0 28.0 28.0 28.0 28.0 28.0 25.0 10.0

Temp (ºF) Min. Bend Radius (In.)

10 20 50 50 70 90 90 90 100 100 100 125 150 150 150 150 150 150 150 200 200 200 200 250 250 250 250 250 250 250 250 350 500 500 500 500 501 1000 1000 10 18 20 85 100 110 200 250 500 5 10 15

Cover Color/Stripe

63SB 163SB 770SB MF 201CR MF 300 EPDM MF 100GR MF 101CL MF 200CL 4684CF 75W Tufflex Food 76W 429W Sandblast Barracuda Colt Dolphin Longhorn – SC Shark Super-Vac 6B Dura Master 1-1/4 Mustang 45HW Renegade Wagon Master 119B Plant Master 19B Plant Master 205MB Steam King Adapta Flex Brew Master Cellar Master Duro Flex Premo Flex LP350 18MB 19B Plant Master 500 MP/Air Drill 500 MP/Air Drill Terminator 1000 MP/Mine Spray 319MB 63SB 163SB 4663K 4684CF 1-3/8 75W 76W Wagon Master 19B Plant Master 19B Plant Master MF Vapor Recovery 1-1/2 63SB 163SB

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

+212ºF +212ºF +150ºF +130ºF +140ºF +130ºF +130ºF +130ºF +212ºF +257ºF +130ºF +257ºF +150ºF +180ºF +250ºF +180ºF +180ºF +180ºF +150ºF +200ºF +250ºF +212ºF +180ºF +212ºF +212ºF +450ºF +200ºF +230ºF +230ºF +200ºF +212ºF +150ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF +180ºF +212ºF +212ºF +140ºF +212ºF +212ºF

Air Drill / Air Duct Air Drill / Air Duct Material Handling Food & Beverage Material Handling Water Water Food & Beverage Special Applications Water Food & Beverage Water Material Handling Water Acid Chemical Water Petroleum Transfer Water Petroleum Transfer Multi-Purpose Acid Chemical Acid Chemical Petroleum Transfer Multi-Purpose Multi-Purpose Steam Multi-Purpose Food & Beverage Food & Beverage Multi-Purpose Multi-Purpose Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Air Drill / Air Duct Air Drill / Air Duct Special Applications Special Applications Water Water Petroleum Transfer Multi-Purpose Multi-Purpose Petroleum Transfer Air Drill / Air Duct Air Drill / Air Duct

Catalog Page No. 18 19 39 23 37 103 104 22 88 98 31 99 33 102 16 97 65 101 71 46 10 15 74 41 40 93 50 29 30 47 45 72 17 40 56 56 42 53 55 18 19 87 88 98 99 74 40 40 70 18 19

Hose Finder

Industrial Hose Products/List Prices

Data Pages

30.0 28.0 20.0 28.0 28.0

– – 20.0 28.0 28.0 28.0 5.0 10.0 30.0 5.0 30.0 30.0 30.0 30.0 – 30.0 30.0

– – – 25.0 – 30.0 10.0 30.0 30.0 30.0 20.0 30.0 30.0 20.0 10.0 10.0 10.0

– 10.0 10.0 30.0 30.0 10.0 30.0 30.0 10.0 10.0 15.0 10.0

Med. Med.

– – Med.

– – – – – – – – – – – – – – – – – – – – Med.

– – – – – – – – High High

– – Low

– – Med.

– – High

Tex. Blk

– D G G

– G A

– – G P P P D D3 A P P P C2 A D D C2 D D D B2 L/P P P P P P P C2 A C2 P2 B1 P P P B2 P P C2 A D3 C2

5.0 3.0 6.0 3.0 6.0

– Blk/Gry Clear Grn/Blk

– Clear Blk

– – Clear Blk/Blk Blk/Blk Blk/Yel Blk/Yel Gry/Bur Tan/Bur Blk/Grn Yel/Grn Blk/Grn Wht/Bur Blk/Red Blk/Grn Blk/Grn Wht/Bur Blk/Grn Blk/Grn Blk/Blu Red Blk/Grn Blk/Org Grn/Org Blk/Org Grn/Yel Blu/Red Blu/Red Red Blk Red Blk Red Blk Wht/Bur Wht/Bur Red Wht/Bur Gry/Bur Red Blk Gry/Yel Red

– – 4.0 5.0 4.0 5.0 12.0 12.0 8.0 18.0 10.0 9.0 6.0 5.0

– 4.5 4.0 12.0 12.0 18.0 8.0 12.0 3.0 12.0 8.0 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0

– 20.0 12.0 4.5 4.5 12.0 4.5 4.5 12.0 12.0 12.0 12.0

0.41 0.40 0.68 0.37 0.40 0.17 0.72 0.70 0.48 0.48 0.48 0.64 0.81 0.89 1.37 1.41 1.13 0.60 0.89 0.43 1.14 0.87 0.47 0.63 0.97 0.79 0.70 0.77 0.79 0.76 0.87 0.88 0.90 0.78 0.93 0.86 0.78 0.81 0.78 1.22 1.24 0.79 0.90 0.90 0.79 0.90 0.90 0.78 1.35 1.26 0.78

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

1.77 C Blk 1.88 C/D Blk 1.89 D3 Blk 1.82 G Clear 1.96 P Blk 1.67 G Blu 2.00 G Clear 1.97 C Blk 1.82 G Grn 1.84 G Clear 1.84 G Clear 1.92 P Blk 2.02 P Blk 2.08 P Blk 2.37 D3 Blk 2.23 D2 Wht 2.07 A2 Wht 1.86 P Blk 2.04 P Blk 1.78 P Blk 2.10 C2 Wht 2.02 C Blk 1.82 P Blk 1.90 P Blk 2.07 C2 Wht 1.96 P Blk 1.98 D Blk 1.97 C Blk 1.98 B Blk 1.97 K Tan 2.04 K Tan 2.04 K Tan 2.13 K Tan 2.00 L/K Clear 2.05 T Wht 2.08 T Wht 2.00 C Blk 2.00 C Blk 2.00 C Blk 2.14 P2 Blk 2.18 P2 Blk 1.98 P Blk 2.07 S Wht 2.07 S Wht 1.98 B Blk 2.07 S Wht 2.07 S Wht 2.00 C Blk 2.25 C Blk 2.21 A Blk 2.00 C Blk

Cover

-40ºF -30ºF -40ºF -10ºF -30ºF +25ºF -10ºF -40ºF -10ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -20ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF

Max.

20 40 50 50 60 75 75 85 90 90 90 100 112 130 135 150 150 150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 200 200 250 250 250 250 250 250 250 250 250 250 250 350 500 500

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

4663K MF 400 770SB MF 201CR MF 300 EPDM MF 500 Tufflex Food 4684CF MF 100GR MF 101CL MF 200CL 75W 76W Hot Air Blower 429W Sandblast 690SB-3 692SB-2 Barracuda Colt Dolphin Food Master Lite Longhorn – SC Marlin Marlin Sani-Pure Shark Steelhead 1-1/2 Super-Vac 6B Dura Master Appaloosa Mustang 45HW Mustang 45HW Mustang 45HW-CR Renegade Stallion Stallion - CR Wagon Master 119B Plant Master 19B Plant Master 205MB Steam King 232MB Steam Queen Adapta Flex Brew Master Cellar Master Duro Flex Food & Bev Master Food & Bev Master Premo Flex LP350 18MB 19B Plant Master

39496-000 June 3, 2002 New

Hose Categories

+212ºF +140ºF +150ºF +130ºF +140ºF +120ºF +130ºF +212ºF +130ºF +130ºF +130ºF +257ºF +257ºF +350ºF +150ºF +150ºF +180ºF +180ºF +250ºF +180ºF +230ºF +180ºF +180ºF +180ºF +230ºF +180ºF +150ºF +150ºF +200ºF +225ºF +250ºF +250ºF +250ºF +212ºF +300ºF +300ºF +180ºF +212ºF +212ºF +450ºF +450ºF +200ºF +230ºF +230ºF +200ºF +230ºF +230ºF +212ºF +150ºF +212ºF +212ºF

Special Applications Material Handling Material Handling Food & Beverage Material Handling Water Food & Beverage Special Applications Water Water Food & Beverage Water Water Material Handling Material Handling Food & Beverage Food & Beverage Water Acid Chemical Water Food & Beverage Petroleum Transfer Water Water Food & Beverage Water Water Petroleum Transfer Multi-Purpose Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Petroleum Transfer Multi-Purpose Multi-Purpose Steam Steam Multi-Purpose Food & Beverage Food & Beverage Multi-Purpose Food & Beverage Food & Beverage Multi-Purpose Petroleum Transfer Air Drill / Air Duct Multi-Purpose

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 87 38 39 23 37 100 31 88 103 104 22 98 99 34 33 20 21 102 16 97 26 65 96 96 27 101 95 71 46 12 10 10 11 15 13 14 74 41 40 93 94 50 29 30 47 28 28 45 72 17 40

131

Hose Finder

Industrial Hose Products/List Prices

Data Pages

2.03 A Blk 2.11 A Blk 2.14 C Blk 2.34 C Blk 2.30 P Blk 2.40 P Blk 2.35 D Blk 2.16 A Blk 2.43 G Clr 2.23 A Blk 2.27 C Blk 2.41 C/D Blk 2.44 G Clear 2.37 G Clear 2.39 D3 Blk 2.47 C Blk 2.77 D3 Blk 2.42 P Blk 2.49 P Blk 2.16 G Blu 2.36 G Grn 2.39 G Clear 2.39 G Clear 2.50 G Clear 2.52 P Blk 2.54 C Blk 2.94 D3 Blk 2.58 P Blk 2.75 D2 Wht 2.60 A2 Wht 2.36 P Blk 2.42 C Blk 2.54 P Blk

132

Med. Med.

– – – – – Med. Med.

– – – – Med. Med.

– – – – – – Med. Med.

– – – Med.

– – Med.

– – – – – – – – – – – – – –

Blk/Yel Yel/Blk Yel Yel Gld

12.0 12.0 12.0 18.0 18.0 2.0 3.0 5.5 5.0 15.0 15.0 15.0 2.0 3.0 6.0 5.0 15.0 15.0

0.98 0.98 0.86 0.98 1.06 0.25 0.39 0.44 0.75 0.69 0.87 0.75 0.27 0.42 0.47 0.80 0.74 0.93

– A Tex. A P P D

– Blk Blk Blk Blk/Blk Blk/Blk Blk/Grn

– A Tex. A P P

– Blk Blk Blk Blk/Blk Blk/Blk

– A Tex. A P P D

– Blk Blk Blk Blk/Blk Blk/Blk Blk/Grn

– –

A Blk Tex. Blk

– G G D A D P G

– – – G G P C2 D P D3 A P L/A P

– Clear Clear Blk/Gry Blk Blk/Gry Blk/Blk Grn/Blk

– – – Clear Clear Blk/Blk Red/Wht Blk/Yel Blk/Yel Gry/Bur Tan/Bur Blk/Grn Blk/Red Yel/Grn

Max.

5.0 15.0 30.0 20.0 5.0 4.0 – 3.0 28.0 15.0 30.0 28.0 28.0 28.0 20.0 20.0 30.0 – 28.0 – 28.0 28.0 28.0 – 3.0 30.0 5.0 30.0 30.0 30.0 30.0 30.0 30.0

High

– – – –

D3 C4 C4 C4 M

Catalog Page No.

Hose Categories

-30ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

+212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF +150ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF

Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Air Drill / Air Duct Air Drill / Air Duct Special Applications Special Applications Water Water Water Air Drill / Air Duct Air Drill / Air Duct Special Applications Special Applications Water Water

56 56 42 53 55 18 19 87 88 98 99 95 18 19 87 88 98 99

2.0 3.5 6.0 5.0 15.0 15.0 15.0 2.0 2.0 4.0 7.0 4.0 4.0 4.0 8.0 5.0 16.0 20.0 9.0

0.29 0.45 0.50 0.83 0.78 0.98 0.88 0.30 0.48 0.46 0.53 0.54 0.57 0.48 0.75 0.88 1.65 0.83 0.70 0.21 0.67 0.67 0.70 1.00 1.04 1.15 1.82 1.13 1.88 1.46 0.76 0.98 1.11

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -40ºF -30ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -30ºF +25ºF -10ºF -10ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

+212ºF +212ºF +212ºF +212ºF +257ºF +257ºF +150ºF +212ºF +140ºF +212ºF +212ºF +140ºF +130ºF +130ºF +150ºF +212ºF +150ºF +257ºF +140ºF +120ºF +130ºF +130ºF +130ºF +130ºF +257ºF +180ºF +350ºF +350ºF +150ºF +180ºF +180ºF +180ºF +250ºF

Air Drill / Air Duct Air Drill / Air Duct Special Applications Special Applications Water Water Water Air Drill / Air Duct Petroleum Transfer Air Drill / Air Duct Special Applications Material Handling Food & Beverage Food & Beverage Material Handling Special Applications Material Handling Water Material Handling Water Water Water Food & Beverage Food & Beverage Water Petroleum Transfer Material Handling Material Handling Food & Beverage Food & Beverage Water Petroleum Acid Chemical

18 19 87 88 98 99 95 18 70 19 87 38 23 24 39 88 36 98 37 100 103 104 22 31 99 67 33 34 20 21 102 68 16

– 6.0 5.0 6.0

– 20.0 4.0 20.0 9.0 12.0 12.0 8.0 5.0 6.0

The Gates Rubber Company

Min.

10 15 20 60 75 94 150 5 5 15 20 35 40 40 50 60 60 60 60 65 70 70 70 75 88 100 120 125 150 150 150 150 150

– –

Hose Wt. (Lbs./Ft.)

63SB 163SB 4663K 1-7/8 4684CF 75W 76W Steelhead 63SB MF Vapor Recovery 163SB 4663K MF 400 MF 201CR MF 202SW 770SB 4684CF 688SB-3 75W MF 300 EPDM MF 500 2 MF 100GR MF 101CL MF 200CL Tufflex Food 76W Maverick 429W Sandblast Hot Air Blower 690SB-3 692SB-2 Barracuda Brahma Colt

Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk

Min. Bend Radius (In.)

C C C P A A A C C P P D A A C C P P

Color/Stripe

1.99 1.99 2.09 1.92 1.94 1.78 1.86 1.90 2.10 2.05 2.15 2.10 1.91 1.98 2.02 2.22 2.17 2.27

Temp (ºF)

Type

15.0 15.0 10.0 15.0 15.0 5.0 15.0 30.0 20.0 5.0 8.0 – 5.0 15.0 30.0 20.0 5.0 5.0

Cover Oil Resistance

Hose O.D. (In.)

500 500 501 1000 1000 10 15 20 75 90 106 150 10 15 20 75 75 100

Color

Suction (In. Hg.)

500 MP/Air Drill 500 MP/Air Drill 1-1/2 Terminator 1000 MP/Mine Spray 319MB 63SB 163SB 4663K 1-5/8 4684CF 75W 76W Steelhead 63SB 163SB 1-3/4 4663K 4684CF 75W 76W

Hose I.D. (In.)

Rated W. P. (psi)

Tube

Name

39496-000 June 3, 2002 New

Hose Finder

Industrial Hose Products/List Prices

Data Pages

2-1/8

2-1/4

2-3/8 2-1/2

– 30.0 30.0 30.0

– – – 25.0

– – 30.0 30.0 30.0 30.0 20.0 30.0 30.0 20.0

– 10.0 30.0 30.0 30.0 30.0 10.0 30.0 10.0 10.0 15.0 15.0 15.0 10.0 10.0 10.0

– 3.0 15.0 20.0

– 3.0 15.0 30.0 20.0

– 1.0 3.0 15.0 20.0 – – 3.0

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – High

– – – – – Med.

– – – Med. Med.

– – – – Med.

– – –

P C2 A A D D C2 D D A D L/P P P P P P P P2 B1 P P P P A A A A D3 D3 C4 C4 C4 M A

Blk/Grn Wht/Bur Blk/Red Blk/Red Blk/Grn Blk/Grn Wht/Bur Blk/Grn Blk/Grn Blk/Red Blk/Blu Blk/Grn Blk/Org Grn/Org Blk/Org Grn/Yel Blu/Red Blu/Red Blk Red Wht/Bur Wht/Bur Wht/Bur Gry/Bur Blk/Red Blk/Red Blk Blk/Blu Gry/Yel Blk/Yel Yel/Blk Yel Yel Gld Blk/Blu

–

A A P

Blk Blk Blk/Blk

– A Tex. A P P

– Blk Blk Blk Blk/Blk Blk/Blk

–

A A P P

Blk Blk Blk/Blk Blk/Blk

–

– 6.0 5.0 6.0 20.0 20.0 24.0 10.0 20.0

– 4.0 9.0 9.0 9.0 9.0 9.0 9.0 9.0

– 25.0 6.0 6.0 6.0 6.0 14.0 10.0 14.0 16.0 14.0 14.0 14.0 14.0 25.0 25.0 25.0 2.0 4.0 6.0 20.0 2.5 4.5 8.0 6.0 20.0 20.0 2.5 4.5 7.0 25.0 25.0 2.5

0.65 1.50 1.08 1.12 0.65 0.84 1.25 1.01 0.93 0.93 0.99 0.97 1.10 1.11 1.13 0.99 1.18 1.09 1.63 1.64 1.20 1.20 1.20 1.20 1.40 1.87 2.01 1.50 1.99 1.43 1.43 1.21 1.36 1.48 2.95 0.32 0.50 0.93 0.87 0.34 0.52 0.59 0.98 0.92 1.16 0.35 0.55 1.03 0.96 1.22 0.38

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

2.32 P Blk 2.60 C2 Wht 2.47 C Blk 2.52 C Blk 2.33 P Blk 2.41 P Blk 2.57 C2 Wht 2.46 P Blk 2.48 D Blk 2.44 C Blk 2.47 C Blk 2.47 K Tan 2.54 K Tan 2.54 K Tan 2.63 K Tan 2.50 L/K Clear 2.55 T Wht 2.58 T Wht 2.66 P2 Blk 2.66 P2 Blk 2.62 S Wht 2.62 S Wht 2.62 S Wht 2.62 S Wht 2.66 C Blk 2.78 C Blk 2.86 C Blk 2.71 A Blk 2.77 A Blk 2.49 C Blk 2.49 C Blk 2.64 C Blk 2.44 P Blk 2.46 A Blk 2.63 A Blk 2.28 A Blk 2.40 A Blk 2.60 C Blk 2.55 P Blk 2.41 A Blk 2.48 A Blk 2.52 C Blk 2.72 C Blk 2.67 P Blk 2.77 P Blk 2.53 A Blk 2.61 A Blk 2.85 C Blk 2.80 P Blk 2.90 P Blk 2.66 A Blk

Cover

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -30ºF -30ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

150 150 150 150 150 150 150 150 150 150 150 200 200 200 200 200 200 200 250 250 250 250 250 250 300 300 350 400 500 500 500 501 1000 1000 3000 5 10 55 60 5 10 20 55 60 88 5 10 50 60 81 5

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

Dolphin Food Master Lite Longhorn - CC Longhorn - SC Marlin Marlin Sani-Pure Shark Steelhead Steer Super-Vac Appaloosa Mustang 45HW Mustang 45HW Mustang 45HW-CR Renegade Stallion Stallion - CR 205MB Steam King 232MB Steam Queen Brew Master Cellar Master Food & Bev Master Food & Bev Master SeaHorse SeaHorse HW LP350 Trident 400 18MB 500 MP/Air Drill 500 MP/Air Drill Terminator 1000 MP/Mine Spray 319MB Powerbraid Plus 63SB 163SB 4684CF 75W 63SB 163SB 4663K 4684CF 75W 76W 63SB 163SB 4684CF 75W 76W 63SB

39496-000 June 3, 2002 New

Hose Categories

+180ºF +230ºF +180ºF +180ºF +180ºF +180ºF +230ºF +180ºF +150ºF +180ºF +150ºF +225ºF +250ºF +250ºF +250ºF +212ºF +300ºF +300ºF +450ºF +450ºF +230ºF +230ºF +230ºF +230ºF +180ºF +180ºF +150ºF +158ºF +212ºF +212ºF +212ºF +212ºF +212ºF +212ºF +180ºF +212ºF +212ºF +212ºF +257ºF +212ºF +212ºF +212ºF +212ºF +257ºF +257ºF +212ºF +212ºF +212ºF +257ºF +257ºF +212ºF

Water Food & Beverage Petroleum Transfer Petroleum Transfer Water Water Food & Beverage Water Water Petroleum Transfer Petroleum Transfer Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Acid Chemical Steam Steam Food & Beverage Food & Beverage Food & Beverage Food & Beverage Petroleum Transfer Petroleum Transfer Petroleum Transfer Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Multi-Purpose Oilfield Air Drill / Air Duct Air Drill / Air Duct Special Applications Water Air Drill / Air Duct Air Drill / Air Duct Special Applications Special Applications Water Water Air Drill / Air Duct Air Drill / Air Duct Special Applications Water Water Air Drill / Air Duct

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 97 26 65 65 96 96 27 101 95 69 71 12 10 10 11 15 13 14 93 94 29 30 28 28 79 80 72 78 17 56 56 42 53 55 57 18 19 88 98 18 19 87 88 98 99 18 19 88 98 99 18

133

Hose Finder

Industrial Hose Products/List Prices

Data Pages

134

10 20 35 40 40 50 50 50 60 60 65 65 65 75 110 125 125 150 150 150 150 150 150 150 150 150 150 150 150 150 150 250 250 250 250 300 400 500 500 500 1000 2500 5000 7500 5 10 40 60 69 5 10

– – 28.0 28.0 28.0

– 30.0 30.0 30.0 30.0 30.0

– 30.0 30.0

– – 30.0 30.0

– 25.0 30.0

– 30.0 30.0 30.0 30.0 30.0 10.0 10.0 10.0 10.0 10.0 10.0

– – – 3.0 15.0 15.0

– – 3.0 15.0

2.73 A Blk 2.77 C Blk 2.98 C/D Blk 2.98 G Clear 3.01 G Clear 2.97 C Blk 2.89 D3 Blk 3.00 P Blk 2.92 P Blk 2.55 G Blu 2.90 G Grn 2.92 G Clear 2.92 G Clear 3.02 P Blk 3.08 P Blk 3.23 D2 Wht 2.85 A2 Wht 2.90 P Blk 3.05 P Blk 2.82 P Blk 3.13 C2 Wht 3.05 C Blk 2.83 P Blk 2.91 P Blk 3.05 K Tan 3.01 L/K Clear 3.08 C2 Wht 3.02 P Blk 3.07 T Wht 2.99 D Blk 2.99 C Blk 3.25 S Wht 3.25 S Wht 3.25 S Wht 3.25 S Wht 3.16 C Blk 3.20 A Blk 3.46 A Blk 3.14 C Blk 3.14 C Blk 3.34 A Blk 3.38 C Blk 4.23 C3 Blk 5.17 C3 Blk 2.78 A Blk 2.86 A Blk 3.10 C Blk 3.05 P Blk 3.15 P Blk 2.91 A Blk 2.98 A Blk

– Med. Med.

A Blk Tex. Blk

– G G A D G P

– – Med.

– Med.

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – High High

– – Med.

– – – –

– Clear Clear Blk Blk/Gry Grn/Blk Blk/Blk

– – –

– – – G P P D3 A P P P C2 A D D P P C2 D P D D P P P P A A D3 D3 C4 B2 A C4 C4

Clear Blk/Blk Blk/Yel Gry/Bur Tan/Bur Blk/Grn Yel/Grn Blk/Grn Wht/Bur Blk/Red Blk/Grn Blk/Grn Blk/Org Grn/Yel Wht/Bur Blk/Grn Blu/Red Blk/Grn Blk/Blu Wht/Bur Wht/Bur Wht/Bur Gry/Bur Blk/Red Blk/Blu Gry/Yel Blk/Yel Yel/Blk Blk Blk/Blu Blk/Yel Blk/Yel

–

A A P P

Blk Blk Blk/Blk Blk/Blk

– A

– Blk

5.0 10.0 5.0 5.0 4.0 7.0 9.0 11.0 25.0

– 8.0 7.0 8.0 25.0 14.0 15.0 15.0 10.0 9.0

– 12.0 8.0 25.0 25.0 12.0 12.0 30.0 12.0 12.0 25.0 5.0 12.0 12.0 12.0 12.0 17.0 20.0 30.0 16.0 16.0 20.0 30.0 48.0 48.0 3.0 5.0 9.0 25.0 25.0 3.0 5.0

The Gates Rubber Company

0.57 0.65 0.77 0.77 0.92 1.08 0.91 0.90 1.01 0.28 0.95 0.95 0.97 1.27 1.43 2.25 1.77 1.06 1.48 0.80 1.98 1.48 0.80 1.02 1.40 1.28 1.65 1.46 1.49 1.14 1.46 1.81 1.81 1.81 1.81 1.70 1.82 3.04 2.19 2.19 2.90 4.00 9.88 20.68 0.39 0.60 1.12 1.06 1.33 0.41 0.62

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

Hose O.D. (In.)

Suction (In. Hg.) 15.0 30.0 28.0 28.0 28.0 20.0 20.0 28.0

Cover

-40ºF -40ºF -30ºF -10ºF -10ºF -40ºF -40ºF -30ºF -40ºF +25ºF -10ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -30ºF -30ºF -30ºF -40ºF -40ºF -4ºF -4ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

163SB 4663K MF 400 MF 201CR MF 202SW 4684CF 770SB MF 300 EPDM 75W MF 500 MF 100GR MF 101CL MF 200CL 76W Hot Air Blower 690SB-3 692SB-2 Barracuda Colt Dolphin Food Master Lite Longhorn - SC 2-1/2 Marlin Marlin Mustang 45HW Renegade Sani-Pure Shark Stallion Steelhead Super-Vac Brew Master Cellar Master Food & Bev Master Food & Bev Master SeaHorse Trident 400 18MB 500 MP/Air Drill 500 MP/Air Drill 3619MC Powerbraid Plus Black Gold Rotary, Grade D Black Gold Rotary, Grade E 63SB 163SB 2-5/8 4684CF 75W 76W 63SB 2-3/4 163SB

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

Catalog Page No.

+212ºF +212ºF +140ºF +130ºF +130ºF +212ºF +150ºF +140ºF +257ºF +120ºF +130ºF +130ºF +130ºF +257ºF +350ºF +150ºF +180ºF +180ºF +250ºF +180ºF +230ºF +180ºF +180ºF +180ºF +250ºF +212ºF +230ºF +180ºF +300ºF +150ºF +150ºF +230ºF +230ºF +230ºF +230ºF +180ºF +158ºF +212ºF +212ºF +212ºF +212ºF +180ºF +180ºF +180ºF +212ºF +212ºF +212ºF +257ºF +257ºF +212ºF +212ºF

Air Drill / Air Duct Special Applications Material Handling Food & Beverage Food & Beverage Special Applications Material Handling Material Handling Water Water Water Water Food & Beverage Water Material Handling Food & Beverage Food & Beverage Water Acid Chemical Water Food & Beverage Petroleum Transfer Water Water Acid Chemical Acid Chemical Food & Beverage Water Acid Chemical Water Petroleum Transfer Food & Beverage Food & Beverage Food & Beverage Food & Beverage Petroleum Transfer Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Oilfield Oilfield Oilfield Air Drill / Air Duct Air Drill / Air Duct Special Applications Water Water Air Drill / Air Duct Air Drill / Air Duct

19 87 38 23 24 88 39 37 98 100 103 104 22 99 34 20 21 102 16 97 26 65 96 96 10 15 27 101 13 95 71 29 30 28 28 79 78 17 56 56 54 57 58,59,60 61,62 18 19 88 98 99 18 19

Hose Finder

Industrial Hose Products/List Prices

Data Pages

3.0 28.0 7.0 30.0 28.0 28.0 28.0 15.0

– – 20.0 28.0 28.0 30.0 28.0 28.0

– – 28.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0 30.0

– 30.0 30.0 30.0

– – 30.0 30.0 30.0

– 25.0 30.0

– – 30.0 30.0 30.0

3.35 C Blk 3.30 P Blk 3.40 P Blk 3.16 A Blk 3.54 G Clr 3.23 A Blk 3.27 C Blk 3.87 C/D Blk 3.54 G Clear 3.05 G Clear 3.47 C Blk 3.47 D3 Blk 3.42 P Blk 3.39 D3 Blk 3.60 P Blk 3.46 G Clear 3.81 D3 Blk 3.44 G Grn 3.46 G Clear 3.17 G Blu 3.52 P Blk 3.76 C3 Blk 3.75 D2 Wht 3.64 P Blk 3.57 C Blk 3.52 A2 Wht 3.51 K Tan 3.54 P Blk 3.47 C Blk 3.60 P Blk 3.36 P Blk 3.63 C2 Wht 3.50 C Blk 3.58 C Blk 3.33 P Blk 3.41 P Blk 3.58 K Tan 3.58 K Tan 3.53 L/K Clear 3.58 C2 Wht 3.58 P Blk 3.59 T Wht 3.49 D Blk 3.45 C Blk 3.52 C Blk 3.86 S Wht 3.86 S Wht

Med.

– – Med.

– – – – – Med. Med.

– – Med.

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –

10.0 28.0 28.0

1.17 1.10 1.38

-40ºF +212ºF Special Applications 88 -40ºF +257ºF Water 98 -40ºF +257ºF Water 99

A P P

Blk Blk/Blk Blk/Blk

– –

11.0 28.0 28.0 3.0 3.0 5.5 12.0 6.0 6.0 6.0 12.0 36.0 36.0 10.0 12.0 8.0 24.0 9.0 9.0

1.21 1.15 1.44 0.44 0.69 0.67 0.84 1.05 1.04 1.02 1.26 1.30 1.20 1.19 1.10 1.25 2.54 1.25 1.27 0.39 1.49 1.20 2.73 1.89 1.76 2.20 1.58 1.74 1.53 1.94 1.08 2.35 1.70 1.87 0.95 1.21 1.79 1.81 1.63 1.90 2.01 1.83 1.35 1.39 1.76 2.46 2.46

-40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -40ºF -30ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -30ºF -10ºF -40ºF -10ºF -10ºF +25ºF -40ºF -30ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

A Blk Tex. Blk

– G G A D P D G

– D

– G

– P G D3 P C2 A L/P P L/A P P C2 A A D D P P P C2 D P D A D P P

– Clear Clear Blk Blk/Gry Blk/Blk Blk/Gry Grn/Blk

– Blk/Gry

– Clear

– Blk/Blk Blk/Yel Gry/Bur Blk/Yel Red/Wht Tan/Bur Blk/Grn Blk/Grn Blk/Red Yel/Grn Blk/Grn Wht/Bur Blk/Red Blk/Red Blk/Grn Blk/Grn Blk/Org Grn/Org Grn/Yel Wht/Bur Blk/Grn Blu/Red Blk/Grn Blk/Red Blk/Blu Wht/Bur Wht/Bur

– 36.0 6.0 18.0 18.0 6.0 18.0 18.0 14.0 8.0 11.0

– 18.0 8.0 9.0 36.0 36.0 18.0 18.0 18.0 36.0 15.0 18.0 36.0

– 6.0 18.0 18.0

Max.

Blk Blk/Blk Blk/Blk

Min.

A P P

Type

Oil Resistance

Color Blk Blk Blk

Hose Wt. (Lbs./Ft.)

76W 63SB MF Vapor Recovery 163SB 4663K MF 400 MF 201CR MF 202SW 4684CF 609W-2 75W 770SB MF 300 EPDM MF 101CL 688SB-3 MF 100GR MF 200CL MF 500 76W MF Fuel Delivery 690SB-3 Hot Air Blower Maverick 692SB-2 Appaloosa Barracuda Brahma Colt Dolphin Food Master Lite Longhorn - CC Longhorn - SC Marlin Marlin Mustang 45HW Mustang 45HW Renegade Sani-Pure Shark Stallion Steelhead Steer Super-Vac Brew Master Cellar Master

15.0

– –

C P P

Temp (ºF) Min. Bend Radius (In.)

40 60 63 5 5 10 20 30 35 35 40 40 50 50 50 55 60 60 60 60 63 65 100 100 100 125 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 250 250

3.22 3.17 3.27

Cover Color/Stripe

4684CF

2-7/8 75W

15.0

– –

Type

40 60 63

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

4684CF 2-3/4 75W 76W

39496-000 June 3, 2002 New

+212ºF +257ºF +257ºF +212ºF +140ºF +212ºF +212ºF +140ºF +130ºF +130ºF +212ºF +150ºF +257ºF +150ºF +140ºF +130ºF +150ºF +130ºF +130ºF +120ºF +257ºF +130ºF +150ºF +350ºF +180ºF +180ºF +225ºF +180ºF +180ºF +250ºF +180ºF +230ºF +180ºF +180ºF +180ºF +180ºF +250ºF +250ºF +212ºF +230ºF +180ºF +300ºF +150ºF +180ºF +150ºF +230ºF +230ºF

The world’s most trusted name in belts, hose and hydraulics.

Hose Categories

Special Applications Water Water Air Drill / Air Duct Petroleum Transfer Air Drill / air Duct Special Applications Material Handling Food & Beverage Food & Beverage Special Applications Material Handling Water Material Handling Material Handling Water Material Handling Water Food & Beverage Water Water Petroleum Transfer Food & Beverage Material Handling Petroleum Transfer Food & Beverage Acid Chemical Water Petroleum Transfer Acid Chemical Water Food & Beverage Petroleum Transfer Petroleum Transfer Water Water Acid Chemical Acid Chemical Acid Chemical Food & Beverage Water Acid Chemical Water Petroleum Transfer Petroleum Transfer Food & Beverage Food & Beverage

Catalog Page No.

88 98 99 18 70 19 87 38 23 24 88 35 98 39 37 104 36 103 22 100 99 66 20 34 67 21 12 102 68 16 97 26 65 65 96 96 10 10 15 27 101 13 95 69 71 29 30

135

Hose Finder

Industrial Hose Products/List Prices

Data Pages

3.35

Blk

63SB 163SB 75W 4684CF 3-1/2 76W Hot Air Blower Marlin Steelhead Black Gold Rotary, Grade D Black Gold Rotary, Grade E 3-5/8 63SB

5 10 20 35 50 85 150 150 5000 7500 5

3.0 7.0 – 15.0 – 30.0 – – – – 3.0

3.66 3.73 3.92 3.97 4.02 4.14 3.91 3.99 5.28 6.18 3.78

A A P C P P P D C3 C3 A

Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk

– – – –

63SB MF Vapor Recovery 163SB 75W 4684CF MF 400 MF 201CR MF 202SW 76W 609W-2 610W 688SB-3 MF 300 EPDM 770SB MF 100GR MF 101CL MF 200CL 609W-3 609W-4 MF 500 MF Fuel Delivery 690SB-3 692SB-2 Hot Air Blower Maverick

5 5 10 12 30 30 35 35 38 40 40 45 45 50 50 50 50 60 60 60 65 75 75 75 100

3.0 28.0 7.0 – 10.0 28.0 28.0 28.0 – – – 30.0 28.0 20.0 28.0 28.0 28.0 – – – 28.0 30.0 30.0 30.0 30.0

4.16 A Blk 4.56 G Clr 4.23 A Blk 4.42 P Blk 4.47 C Blk 4.65 C/D Blk 4.65 G Clear 4.54 G Clear 4.52 P Blk 4.47 D3 Blk 4.56 D2 Wht 4.77 D3 Blk 4.69 P Blk 4.39 D3 Blk 4.52 G Grn 4.56 G Clear 4.56 G Clear 4.61 D3 Blk 4.73 D3 Blk 4.20 G Blu 4.79 C3 Blk 4.71 D2 Wht 4.55 A2 Wht 4.64 P Blk 4.57 C Blk

136

Med.

– – – – High High

– – – – – Med. Med.

– – – – – – Med.

– – – – – – – – – – – –

Blk

– A P A P P D D C4 C4

– Blk Blk/Blk Blk Blk/Blk Blk/Yel Blk/Grn Blk/Grn Blk/Yel Blk/Yel

– – –

A P A

Blk Blk/Blk Blk

– G G P D D3 D G D

– – G D D

– G D3 A P C2

– Clear Clear Blk/Blk Blk/Gry Gry/Bur Blk/Gry Grn/Blk Blk/Gry

– – Clear Blk/Gry Blk/Gry

– Blk/Yel Gry/Bur Tan/Bur Blk/Yel Red/Wht

18.0 18.0 21.0 18.0 24.0 24.0 36.0 20.0 20.0 20.0 36.0 48.0 48.0

2.46 2.47 2.17 3.14 2.77 2.23 3.69 2.78 2.78 4.05 4.33 10.99 23.70

5.5

0.70

3.5 6.0 42.0 17.0 42.0 21.0 42.0 42.0 48.0 54.0 3.5 4.0 4.0 8.0 48.0 24.0 8.0 8.0 8.0 48.0 48.0 48.0 32.0 17.0 15.0 13.0 12.0 12.0 48.0 48.0

– 8.0 24.0 24.0 24.0 11.0

The Gates Rubber Company

-40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -30ºF -30ºF -30ºF -40ºF -40ºF -4ºF -4ºF

Max.

7.0

3-1/8 163SB

High High

Wht/Bur Gry/Bur Blk/Red Blk/Red Blk Blk/Blu Gry/Yel Blk/Yel Yel/Blk Blk Blk/Blu Blk/Yel Blk/Yel

Min.

P P A A A A D3 D3 C4 B2 A C4 C4

Hose Wt. (Lbs./Ft.)

– – – – – – – – – – –

Temp (ºF) Min. Bend Radius (In.)

Wht Wht Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk Blk

Color/Stripe

S S C C C A A C C A C C3 C3

Type

3.86 3.86 3.70 3.86 3.88 3.71 3.97 3.67 3.67 3.91 3.90 4.78 5.67

Oil Resistance

Type

30.0 30.0 10.0 30.0 10.0 10.0 10.0 10.0 10.0 10.0 – – –

Food & Bev Master Food & Bev Master SeaHorse SeaHorse HW LP350 Trident 400 18MB 500 MP/Air Drill 500 MP/Air Drill 3619MC Powerbraid Plus Black Gold Rotary, Grade D Black Gold Rotary, Grade E

Color

Hose O.D. (In.)

250 250 300 300 350 400 500 500 500 1000 2000 5000 7500

Hose I.D. (In.)

Suction (In. Hg.)

Cover

Rated W. P. (psi)

Tube

Name

39496-000 June 3, 2002 New

+230ºF +230ºF +180ºF +180ºF +150ºF +158ºF +212ºF +212ºF +212ºF +212ºF +180ºF +180ºF +180ºF

Hose Categories Food & Beverage Food & Beverage Petroleum Transfer Petroleum Transfer Petroleum Transfer Petroleum Transfer Air Drill / Air Duct Multi-Purpose Multi-Purpose Multi-Purpose Oilfield Oilfield Oilfield

Catalog Page No. 28 28 79 80 72 78 17 56 56 54 57 58,59,60 61,62

-40ºF +212ºF Air Drill / Air Duct

0.51 0.77 1.40 1.45 1.72 2.17 1.47 1.64 13.41 25.84 0.53

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -4ºF -4ºF -40ºF

+212ºF +212ºF +257ºF +212ºF +257ºF +350ºF +180ºF +150ºF +180ºF +180ºF +212ºF

Air Drill / Air Duct Air Drill / Air Duct Water Special Applications Water Material Handling Water Water Oilfield Oilfield Air Drill / Air Duct

18 19 98 88 99 34 96 95 58,59,60 61,62,63 18

0.75 0.92 0.87 1.57 1.64 1.70 1.65 1.36 1.94 1.69 2.22 3.21 1.80 1.49 1.94 1.94 2.00 2.21 2.69 0.53 1.80 3.51 2.96 2.44 2.29

-40ºF -30ºF -40ºF -40ºF -40ºF -30ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -10ºF -10ºF -10ºF -40ºF -40ºF +25ºF -30ºF -40ºF -40ºF -40ºF -40ºF

+212ºF +140ºF +212ºF +257ºF +212ºF +140ºF +130ºF +130ºF +257ºF +150ºF +150ºF +150ºF +140ºF +150ºF +130ºF +130ºF +130ºF +150ºF +150ºF +120ºF +130ºF +150ºF +180ºF +350ºF +180ºF

Air Drill / Air Duct Petroleum Transfer Air Drill / Air Duct Water Special Applications Material Handling Food & Beverage Food & Beverage Water Material Handling Food & Beverage Material Handling Material Handling Material Handling Water Water Food & Beverage Material Handling Material Handling Water Petroleum Transfer Food & Beverage Food & Beverage Material Handling Petroleum Transfer

18 70 19 98 88 38 23 24 99 35 25 36 37 39 103 104 22 35 35 100 66 20 21 34 67

Hose Finder

Industrial Hose Products/List Prices

Data Pages

30.0 30.0 30.0 30.0 30.0 30.0 30.0 – 30.0 30.0 30.0 – – – 25.0

– – 30.0 30.0 30.0 30.0 10.0 30.0 10.0 10.0 – – 3.0 7.0 – 5.0 – 30.0 – 3.0 28.0 6.0 5.0 – – 28.0 30.0 28.0 28.0 20.0 30.0 30.0 – 25.0 10.0 3.0

– – – – – – – – – – – – – – – – – – – – – – – – – High High

– – – Med.

– – – – – – Med.

– –

D P P P P P L/A P C2 A A D D C2 D D A P P P P A A A D3 C4 C4

– A P A D D D

– – A A D D3

Med.

–

– – – – – – – – – –

– – D D3 P D D A

–

Blk/Blu Yel/Grn Blk/Org Grn/Yel Blu/Red Blk/Grn Blk/Red Blk/Grn Wht/Bur Blk/Red Blk/Red Blk/Grn Blk/Grn Wht/Bur Blk/Grn Blk/Grn Blk/Red Wht/Bur Wht/Bur Wht/Bur Gry/Bur Blk/Red Blk/Red Blk/Blu Gry/Yel Blk/Yel Blk/Yel

– Blk Blk/Blk Blk Blk/Gry Blk/Gry Blk/Grn

– – Blk Blk Blk/Gry Gry/Bur

– Blk/Gry

– – Blk/Gry Gry/Bur Blk/Yel Blk/Grn Blk/Grn Blk/Red

–

8.0 16.0 24.0 24.0 24.0 18.0 11.0

– 24.0 11.0 12.0 48.0 48.0 48.0 20.0 48.0

– 36.0 36.0 36.0 36.0 28.0 24.0 32.0 48.0 54.0 54.0 4.5 9.0 54.0 27.0 54.0 36.0 54.0 5.0 5.0 10.0 30.0 60.0 60.0 9.0 40.0 21.0 21.0 20.0 30.0 30.0 60.0 25.0 35.0 6.0

2.29 2.52 2.72 2.11 2.74 2.25 2.10 1.41 3.12 2.50 2.72 1.32 1.67 2.77 2.62 1.85 2.03 3.24 3.24 3.24 3.24 2.80 4.03 3.49 5.77 25.83 28.60 0.84 1.08 1.75 1.84 1.89 3.57 2.16 0.93 1.13 1.20 2.03 2.09 2.73 2.40 3.93 3.09 3.09 2.73 4.30 3.82 2.17 3.89 4.14 1.02

Min.

Hose Wt. (Lbs./Ft.)

Temp (ºF) Min. Bend Radius (In.)

Color/Stripe

Type

Oil Resistance

Color

Type

4.52 C Blk 4.60 P Blk 4.69 K Tan 4.53 L/K Clear 4.66 T Wht 4.54 P Blk 4.52 C Blk 4.36 P Blk 4.65 C2 Wht 4.58 C Blk 4.60 C Blk 4.33 P Blk 4.41 P Blk 4.61 C2 Wht 4.58 P Blk 4.49 D Blk 4.51 C Blk 4.88 S Wht 4.88 S Wht 4.88 S Wht 4.88 S Wht 4.70 C Blk 4.87 C Blk 4.84 A Blk 5.06 A Blk 6.26 C3 Blk 6.67 C3 Blk 4.70 A Blk 4.73 A Blk 4.92 P Blk 4.97 C Blk 4.97 D3 Blk 5.27 D3 Blk 5.01 D Blk 5.20 A Blk 5.51 G Clr 5.23 A Blk 5.47 C Blk 5.47 D3 Blk 5.56 D2 Wht 5.77 C/D Blk 5.77 D3 Blk 5.65 G Grn 5.65 G Clear 5.53 D3 Blk 5.75 D2 Wht 5.74 P Blk 5.44 P Blk 5.60 P Blk 5.84 C Blk 5.70 A Blk

Cover

-40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -30ºF -4ºF -4ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -40ºF -40ºF -40ºF -30ºF -40ºF -10ºF -10ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

Max.

100 125 125 125 125 150 150 150 150 150 150 150 150 150 150 150 150 250 250 250 250 300 300 400 500 5000 7500 5 10 12 25 35 40 150 5 5 10 15 30 30 30 40 45 45 50 55 55 150 150 300 5

Hose O.D. (In.)

Name

Suction (In. Hg.)

Hose I.D. (In.)

Rated W. P. (psi)

Tube

Super-Vac Colt Mustang 45HW Renegade Stallion Barracuda Brahma Dolphin Food Master Lite Longhorn - CC Longhorn - SC Marlin Marlin 4 Sani-Pure Shark Steelhead Steer Brew Master Cellar Master Food & Bev Master Food & Bev Master SeaHorse SeaHorse HW Trident 400 18MB Black Gold Rotary, Grade D Black Gold Rotary, Grade E 63SB 163SB 75W 4-1/2 4684CF 609W-2 688SB-3 Steelhead 63SB MF Vapor Recovery 163SB 4684CF 609W-2 610W MF 400 5 688SB-3 MF 100GR MF 101CL 770SB 690SB-3 Hot Air Blower Marlin Shark SeaHorse 5-1/2 63SB

39496-000 June 3, 2002 New

Hose Categories

+150ºF +250ºF +250ºF +212ºF +300ºF +180ºF +180ºF +180ºF +230ºF +180ºF +180ºF +180ºF +180ºF +230ºF +180ºF +150ºF +180ºF +230ºF +230ºF +230ºF +230ºF +180ºF +180ºF +158ºF +212ºF +180ºF +180ºF +212ºF +212ºF +257ºF +212ºF +150ºF +150ºF +150ºF +212ºF +140ºF +212ºF +212ºF +150ºF +150ºF +140ºF +150ºF +130ºF +130ºF +150ºF +150ºF +350ºF +180ºF +180ºF +180ºF +212ºF

Petroleum Transfer Acid Chemical Acid Chemical Acid Chemical Acid Chemical Water Petroleum Transfer Water Food & Beverage Petroleum Transfer Petroleum Transfer Water Water Food & Beverage Water Water Petroleum Transfer Food & Beverage Food & Beverage Food & Beverage Food & Beverage Petroleum Transfer Petroleum Transfer Petroleum Transfer Air Drill / Air Duct Oilfield Oilfield Air Drill / Air Duct Air Drill / Air Duct Water Special Applications Material Handling Material Handling Water Air Drill / Air Duct Petroleum Transfer Air Drill / Air Duct Special Applications Material Handling Food & Beverage Material Handling Material Handling Water Water Material Handling Food & Beverage Material Handling Water Water Petroleum Transfer Air Drill / Air Duct

The world’s most trusted name in belts, hose and hydraulics.

Catalog Page No. 71 16 10 15 13 102 68 97 26 65 65 96 96 27 101 95 69 29 30 28 28 79 80 78 17 58,60 61,63 18 19 98 88 35 36 95 18 70 19 88 35 25 38 36 103 104 39 20 34 96 101 79 18

137

Hose Finder

Industrial Hose Products/List Prices

Data Pages

138

Med. Med.

– – – – – – – – – – – – – – – – – – – – – Med.

–

A A D D3

– G D P

Blk

– Blk Blk Blk/Gry Gry/Bur – Grn/Blk Blk/Gry Blk/Yel

– – –

D3 A D D P P P C2 A D D C2 D D A D

Gry/Bur Tan/Bur Blk/Gry Blk/Blu Yel/Grn Blk/Grn Blk/Grn Wht/Bur Blk/Red Blk/Grn Blk/Grn Wht/Bur Blk/Grn Blk/Grn Blk/Red Blk/Gry

– –

12.0 6.0 18.0 36.0 72.0 72.0 12.0 27.0 48.0 36.0 24.0 23.0

– 36.0 36.0 24.0 18.0 24.0

– 28.0 36.0 18.0 72.0 72.0 72.0 30.0 72.0 36.0 72.0 16.0

–

The Gates Rubber Company

Min.

Hose Wt. (Lbs./Ft.)

Type ®

– –

–

Temp (ºF) Min. Bend Radius (In.)

9.10 C/D Blk 8.16 G Blu

Med.

Color/Stripe

28.0 –

– – –

Type

25 45

Oil Resistance

5.73 A Blk 6.52 G Clr 6.23 A Blk 6.47 C Blk 6.47 D3 Blk 6.56 D2 Wht 6.86 C/D Blk 6.86 P Blk 6.76 D3 Blk 6.74 P Blk 6.80 G Grn 6.80 G Clear 6.20 G Blu 6.91 D2 Wht 6.74 A2 Wht 6.53 D3 Blk 6.67 C Blk 6.78 P Blk 6.38 P Blk 6.68 P Blk 6.74 C2 Wht 6.88 C Blk 6.40 P Blk 6.49 P Blk 6.64 C2 Wht 6.65 P Blk 6.51 D Blk 7.07 C Blk 7.10 D3 Blk

Color

6.0 28.0 6.0 5.0 – – 28.0 28.0 30.0 30.0 28.0 28.0 – 30.0 25.0 20.0 30.0 30.0 – 30.0 30.0 30.0 – – – 25.0 – 30.0 –

Hose O.D. (In.)

10 5 8 15 25 25 25 35 40 40 45 45 45 50 50 50 60 125 125 150 150 150 150 150 150 150 150 200 20

Cover

Max.

MF Vapor Recovery 163SB 4684CF 609W-2 610W MF 400 MF 300 EPDM 688SB-3 Hot Air Blower MF 100GR MF 101CL MF 500 6 690SB-3 692SB-2 770SB Super-Vac Colt Dolphin Barracuda Food Master Lite Longhorn - SC Marlin Marlin Sani-Pure Shark Steelhead SeaHorse HW 6-5/8 609W-2 MF 400 8 MF 500

Suction (In. Hg.)

5-1/2 163SB

Rated W. P. (psi)

Hose I.D. (In.)

Tube

Name

39496-000 June 3, 2002 New

Hose Categories

+212ºF +140ºF +212ºF +212ºF +150ºF +150ºF +140ºF +140ºF +150ºF +350ºF +130ºF +130ºF +120ºF +150ºF +180ºF +150ºF +150ºF +250ºF +180ºF +180ºF +230ºF +180ºF +180ºF +180ºF +230ºF +180ºF +150ºF +180ºF +150ºF

Air Drill / Air Duct Petroleum Transfer Air Drill / Air Duct Special Applications Material Handling Food & Beverage Material Handling Material Handling Material Handling Material Handling Water Water Water Food & Beverage Food & Beverage Material Handling Petroleum Transfer Acid Chemical Water Water Food & Beverage Petroleum Transfer Water Water Food & Beverage Water Water Petroleum Transfer Material Handling

1.31 1.24 1.42 2.42 2.48 3.25 3.21 3.10 4.65 4.52 4.56 4.56 0.88 7.08 5.61 3.24 4.37 4.95 2.09 3.94 5.60 6.28 2.32 2.96 4.10 4.84 2.84 7.95 2.73

-40ºF -30ºF -40ºF -40ºF -40ºF -40ºF -30ºF -30ºF -40ºF -40ºF -10ºF -10ºF +25ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF -40ºF

5.77 1.27

-30ºF +140ºF Material Handling +25ºF +120ºF Water

Catalog Page No. 19 70 19 88 35 25 38 37 36 34 103 104 100 20 21 39 71 16 97 102 26 65 96 96 27 101 95 80 35 38 100

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Chemical Resistance Table

The Chemical Resistance Table was compiled for use as a guide in selecting the most satisfactory hose tube and cover stocks for specific chemical applications. The data included are the best available to us at this time and will be revised as additional test information is obtained. It is always advisable to test rubber stocks under actual application conditions whenever possible. We recognize that much of the material contained in this resistance table must be, to a degree, general in nature. Factors such as method of compounding, temperature, chemical concentrations, conditions of exposure, etc., can appreciably affect polymer behavior. For certain applications, hoses designed for these applications must be used; therefore, the choice of tube stocks is restricted. These applications are: Steam

— Hose from the Steam Hose line

Edible Products — Concentrated Chemicals

FDA, 3A, USDA

— Hose from the Acid-Chemical Hose line

L.P Gas — LP Gas Hose only Gasoline and Petroleum Products — Hoses from the Petroleum Transfer Hose line Hydraulic

— Hoses from Hydraulic Products Catalog

The nature of certain chemicals is such that Gates cannot offer a suitable hose to handle them. Many of the common chemicals are included in the Chemical Resistance Table. If they are not listed, please contact Hose/Connectors Product Application, Denver.

NOTE:

Before using a Gates hose to convey a chemical not listed in this Chemical Resistance Table, contact Denver Product Application for a recommendation. Phone (303) 744-5070.

Hose Selection Procedure: 1.

with a 1 or 2 rating. For continuous contact applications make note of tube materials with a 1 rating only.

Identify the…

Size of Hose required. Temperature of material being conveyed and environmental temperature. Application conditions/requirements such as vibration, flexing, abrasion. Material Being Conveyed Pressure of operation and maximum obtainable in including “spikes” and pump/valve ratings. 2.

the system

Use the Industrial Hose Catalog, Industrial Hose Finder, or Hydraulic Hose Catalog to select hoses that have satisfactory working pressure ratings.

Verify maximum and minimum operating temperatures.

Select the hose that has the best chemical resistance rating (i.e. 1 is Preferred, 2 is Acceptable).

Select the proper coupling for the hose chosen from the Industrial Hose/List Price Catalog

Locate the material being conveyed in the chemical resistance chart and identify potential tube materials: For intermittent contact or transfer service, make note of all tube materials

NOTE:

For Gates Acid/Chemical Hose, permanent style Couplings must be used for service temperatures above 125ºF (52ºC).

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice. ®

The world’s most trusted name in belts, hose and hydraulics.

139

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices

LISTING OF GATES HOSE STOCK TYPES Stock Type

Composition

Polychloroprene (Neoprene)

Similar to Type A except it is white and is used primarily for edible products

Acrylonitrile and Butadiene (NBR)

A blend of Type C and plastic. Used primarily as hose cover material

Modification of Type C, with some properties similar to Type A

Natural Rubber (NR) and Styrene Butadiene (SBR)

Similar to Type D, except it is white and compounded to handle food products

PolyVinyl Chloride (PVC)

Isobutylene and Isoprene (Butyl)

Chlorinated Polyethylene (CPE)

Specially compounded Cross-Linked Polyethylene (Gatron™)

Ultra High Molecular Weight Polyethylene Ethylene (UHMWPE)

Chlorosulfonated Polyethylene (Hypalon®)

Ethylene, Propylene Diene (EPDM)

Specially Compounded Material (Sanitron™)

Fluorinated Thermoplastic (Teflon®)

FEP

PTFE

Urethane

Fluorocarbon (FKM)

Polyamide Resins (Nylon)

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

140

The Gates Rubber Company

Natural Ultra High Isobutylene Ethylene Acrylonitrile Cross ChloroChlorinated Poly Rubber or Polyvinyl Molecular Elastomer and Isoand Linked sulfonated Propylene Polyethylene Chloroprene Styrene Chloride Weight Polyethylene Polyethylene prene Diene Butadiene Polyethylene Butadiene (plasticized) Buna-N Gum Common Name or Nitrile Rubber, PVC Butyl CPE Gatron™ Trade Name Neoprene EPDM UHMWPE Hypalon® Petrothane™ Buna-S ASTM CR NBR NR or SBR — IIR CM XLPE UHPE CSM EPDM Fair Fair Good to Physical Strength Good Good Excellent Good Good Very Good Good to Good to Good Excellent Good Fair Good Fair Good RESISTANCE TO: Excellent Good Good Excellent Good to Excellent to Good to Excellent to Excellent to Good Abrasion Good Poor Weather/Ozone Poor Excellent Excellent Good Excellent Good Excellent Excellent to Excellent to Fair Good Good Fair Gas Permeation Good Good Good Excellent Good Good Excellent to Excellent to Excellent to Good Good Good Petroleum Oils Excellent Excellent Poor Poor Good Excellent Excellent Poor to Excellent to Excellent Fair Excellent Poor Fair Poor Good Excellent Excellent Fair Poor Gasolines to Good Good Good High Temperatures Good Fair Poor Excellent Excellent Good Fair Excellent To Excellent to Excellent Fair Fair Fair Fair Low Temperatures Good Poor Good Good Fair to Good to Good to Good Fair to Good

A2 C2 C4 C4 D2 D3 B1 B2 R P2 T1 T2

FEP/PTFE

Fluorocarbon Fluoroelastomer FKM Viton Fluorel FKM

Very Good

Excellent

Good

Excellent

Good to Excellent

Excellent

Good

Excellent

Teflon®

Polyurethane

Teflon

Urethane

Excellent Excellent

Fair to Good Fair to Good

Polyamide Resins

Nylon PA

Excellent

Good

Excellent

Fair

Excellent

Fair

Excellent

Good

Excellent

Good

Excellent

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

141

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Industrial Hose Products/List Prices Gates Chemical Rating System

non-discoloring characteristics. If the product is not visually affected, then the hose is satisfactory. For some products, the discoloration may be objectionable from a visual standpoint. Also, the concentration of the particles causing the discoloration may be objectionable if they affect the final use of the product.

NOTE: Ratings are for the effect on the polymer only. "1" Preferred: Constant Contact — This chemical is expected to have minor or no effect on the Polymer. Hose approved for continuous contact. Environmental changes such as temperature, concentration, etc., may promote increased degradation. "2" Acceptable: Intermittent Contact — This polymer should give reasonably satisfactory service. Due to the nature of this chemical, and under prolonged continuous exposure, the rubber may show minor to moderate deterioration and/or solution discoloration. Hose in-tended for transfer service only. Environmental changes such as temperature, concentration, etc., may promote increased degradation. "X" Not Recommended — The polymer is unsatisfactory for this chemical and should not be used. "-" (Dash) — Insufficient or no data available for this material. Testing is advised.

NOTE 1.

The above ratings as applied to the Chemical Resistance Table are intended as guides only. They are compiled from the best data available to us. Ratings shown in the table are based on 100% concentrated or saturated solutions, unless otherwise noted, and up to 100° F (+38° C), unless otherwise stated.

NOTE 2.

If unusual conditions exist, a polymer test in the fluid is suggested.

NOTE 3.

Where a chemical listed in the Resistance Table is soluble in a solvent other than water, the solvent should also be checked for its suitability with the polymer.

NOTE 4.

Discoloration of fluids conveyed in the hose. There are no generally accepted standard tests for measuring or rating discoloration of fluids passing through a hose. The amount of discoloration that can be tolerated is usually established by the user on the basis of application. Obviously, products such as paint must be conveyed through a hose that has very good

Some of the more common methods of checking discoloration are: 1.

Allowing the fluid to remain in a sample piece of hose for a specific period and expected operating temperature, then inspecting visually for discoloration.

Testing fluid as in No.1 above and then passing it through filter paper to check foreign content.

A more refined test can be made with a spectrophotometer. This instrument measures light transmission through the fluid before and after immersion tests with rubber stocks. This gives a relative rating expressed in percent, the original fluid being rated at 100%.

If discoloration of the product becomes a serious problem for a specific application, contact Denver Product Application for a recommendation. Phone (303) 744-5070.

NOTE 5.

Fluid permeation through the tube wall needs to be considered. A tube material may show no sign of degradation, however hose failure can occur if material permeates through the tube to degrade adhesive layers or reinforcement.

Hose Coupling Material — Gates recommends hose couplings made of six materials: Iron or Carbon Steel, 304SS, 316SS, Aluminum, Brass and Polypropylene. The Chemical Resistance Table includes columns showing the suitability of a specific coupling material for the chemicals listed. In most instances, at least one coupling material is rated for each chemical. For certain chemicals, other metallic alloys or plastics than those shown in the table are required. These are generally available from coupling manufacturers, but are not stocked by Gates.

Due to continual product improvements, Gates reserves the right to alter specs and prices without prior notice.

142

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

X X 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 -

X X 1 2 1 1 1 1 2 X 2 X X 1 1 1 1 1 X 2 -

X X 2 2 1 1 X X 1 1 1 1 1 1 1 1 X X 1 -

X X X X X X X 1 1 1 1 1 X 1 2 1 X X 1 -

1 X X 2 X 1 X 2 2 X 1 2 X X 2 2 X 2 X 2 1 X 2 X 2 1 X 2 X X X X 2 X X X X X X X 2 X X X 2 X X X X 2 - X X 2 X X X X 2 - X X 2 X 2 2 2 2 X X X X 1 X X X 2 - X X 2 NO HOSE AVAILABLE - X X - X - X X - X 2 X X X X X X 2 2 X X X X 1 X 1 - 2 1 2 X 1 1 X X X 2 1 X X X X 1 1 1 1 1 1 1 - X - 1 1 1 - 1 1 2 2 1 - 1 1 1 X X X X X X X X X X - 1 1 - 1 1 - 1 -

1 X X X X X X X X X X X X 1 X X

2 X 2 2 X X 2 2 X 2 X 2 2 -

1 1 1 1 1 1 X 1 1 1 2 1 1 2 1 1 1

1 2 X X X X X 1 X 1 X -

X 2 X X X X X X X 1 X -

1 1 X 1 1 1 1 1 X 1 1 1 1 1 2 1 1 1 1 1 1 -

X X 1 1 X 1 X 1 -

X X 1 X 1 1 1 X 1 1 1 1 1 2 X -

1 1 X X X X X 1 X 1 1 -

X X X 1 X 2 X X 1 X X X X -

The world’s most trusted name in belts, hose and hydraulics.

Polypro

Fluorocarbon

X 1 1 2 1 1 2 X 1 2 1 2 2 X 1 1 1

Brass

Butyl

X 1 1 1 1 1 X X 1 2 1 1 2 1 2 1 1

Aluminum

Neoprene

EPDM

2 1 1 2 1 1 1 X X 1 1 1 X 2 2 2 1 1

™

Sanitron

2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

UHMWPE

Liquid Colorless Liquid Colorless Liquid Liquid above 176°F(80°C ) Clear Colorless Liquid Clear Colorless Liquid Clear Colorless Liquid Clear Colorless Liquid Clear Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid In Alcohol or Ether Gas Colorless Liquid Colorless Liquid Colorless to Yellow Liquid Colorless Crystals Colorless Liquid Colorless Liquid Colorless Liquid Liquid Colorless Liquid White Crystals Liquid Colorless Gas Colorless Gas Colorless Gas Colorless Gas Liquid Colorless Crystals In Water Solutions Varies Powder Liquid Colorless Liquid Colorless to Yellow Liquid Colorless Liquid Colorless Liquid Powder Colorless Liquid White Crystals White Crystals

Gatron

Absorption Oil Acetal Acetaldehyde Acetamide Acetic Acid (40% or less) Acetic Acid (56% or less) Acetic Acid (85% or less) Acetic Acid (Glacial - 99.4%) Acetic Acid, Anhydride Acetic Anhydride (Acetic Oxide) Acetic Ether (Ethyl Acetate) Acetic Oxide (Acetic Anhydride) Acetone (Dimethylketone) Acetone Cyanohydrin Acetonitrile (Methyl Cyanide) Acetophenone Acetyl Chloride Acetyl Oxide (Acetic Anhydride) Acetyl-P-Toluidine (In Ether or Alcohols) Acetylene Acetylene Dichloride (Dichloroethylene) Acetylene Tetrachloride (Tetrachloroethane) Acrolein (Hydroquinone Inhibited) Acrylamide Acrylates (HEA or HPA) Acrylic Acid Acrylic Acid (Glacial 97%) Acrylic Emulsion Acrylonitrile Adipic Acid (70°F) Aeroshell 7A, 17 Grease Air, 212°F (100°C) Air, 257°F (125°C) Air, 300°F (149°C) Air, Ambient Aircraft Hyd. Oil AA Alachlor (Lasso) Alkaline Liquid (NOS) Alkyaryl Polyether Alcohol Alkyd Resin (Thermosetting Polymer) Alkylaryl Sulfonate (Alkylbenzene Sulfonate) Allomalaic Acid (Fumaric Acid) Solution Allyl Alcohol Allyl Bromide Allyl Chloride Alpha Methylstyrene Alpha Olefin Sulfonate Alpha Picoline Alum (Aluminum Sulphate or Other) Alum, Potash (Aluminum Potassium Sulfate)

Teflon

Form (at room temperature unless otherwise stated

Stainless Steel 316

Stainless Steel 304

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Chemical A

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

Iron/Carbon Steel

1 X X X 1 X 1 X 1 1 1 1 1 1 X X

1 2 2 2 2 2 2 2 1 2 1 2 1 1 1 1 1 1 1 1 1 X 2

1 2 2 2 2 2 2 1 2 1 2 1 1 1 1 1 1 1 1 2 2

1 1 2 2 2 1 2 1 2 1 1 1 1 X X

1 1 1 X X X X 1 X 1 X 1 1 1 X X

1 2 2 X X X X 2 X 2 2 X X 1 2 1 1

143

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

144

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 X 1 1 1 1 1 1

1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1

The Gates Rubber Company

1 1 1 1 1 1 1 1 1 1 X X X -

X 1 1 1 X -

X 1 1 1 1 1 1 1 1 1

X X X 1 1 1

X 1 X 1 X 1 1 2 -

2 1 1 1 2 2 1 X 1 1 1

1 1 1 2 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1

1 2 X X 1 -

1 1 1 1 1 X 2 1 1 -

Polypro

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

- 1 - 1 - 1 1 X X X X X 1 1 1 1 1 1 1 1 1 - 1 1 1 - 1 1 1 X X 1 X X X 1 1 1 1 1 1 1 X X X X 1 1 1 1 1 1 - 1 1 1 1 1 1 1 1 1 1 1 - 1 2 2 2 2 2 2 2 2 2 2 1 NO HOSE AVAILABLE 1 1 1 1 1 1 1 1 2 1 - 1 1 X - 1 2 - 1 2 1 1 X 1 - 1 2 X 2 2 2 2 2 2 2 1 - 1 - 1 1 - 1 1 - 1 1 X X X 2 X - X - 1 1 1 1 1 1 - 1 - 1 2 1 1 1 1 1 1 1 -

Brass

Fluorocarbon

X 1 1 1 1 1 1 1 1 1 2 2 2

Aluminum

Butyl

X 1 1 1 1 1 1 1 1 1 2

Stainless Steel 316

Neoprene

EPDM

X X 1 1 1 1 1 1 1 1 1 1 1 1

™

1 X 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2

™

1 X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Sanitron

Aluminum Fluoride Aluminum Formate (Di & Tri In Water) Aluminum Hydroxide (Alumina Trihydrate) Aluminum Nitrate Aluminum Phosphate Solution Aluminum Salts Aluminum Sulfate Aluminum Sulfate Solution Aluminum Sulfate Solution (49.7% H2O) Amines (A class of Organic Compounds) Amines (Aromatic - IE P-Toluidine) Amines (Mixed) Amines (Primary, Secondary, Tertiary, Etc) Aminodiphenylamine Aminoethanol (Ethanolamine) Aminoethylethanolamine Ammonia (Anhydrous) Ammonia (Aqueous up to 30% NH3) Ammonia Liquor Ammoniated Fatty Acid (ie Ammonium Caprylate) Ammonium Acetate Ammonium Bicarbonate Ammonium Bisulfate (50%) Ammonium Carbonate Ammonium Chloride Ammonium Chloride Solution Ammonium Flouride Ammonium Hydroxide (16%, 20%, 26%, & 30%) Ammonium Hydroxide (up to 30% NH3) Ammonium Metaphosphate Ammonium Nitrate Ammonium Nitrate Fertilizer (20.5% N,or 33.5% N) Ammonium Nitrate Prills and Oil Ammonium Nitrate Solution (up to 83%) Ammonium Nitrite Ammonium Persulfate Ammonium Phosphate Ammonium Phosphate Solutions Ammonium Polysulfide Solution Ammonium Sulfate Ammonium Sulfide Ammonium Sulfide Solution (40-44% or less) Ammonium Thiocyanate (50-60% or less)

UHMWPE

Aluminum Chlorohydrate Solution (Up to 50% )

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Granular White Crystalline Powder White Powder Colorless Liquid White to Yellow Crystals White to Yellow Solution White to Yellow Crystals White Solution White Crystals In Hot Water In Mineral Acid or Caustic Soda In Cold Water In HCl or HNO3 (slightly soluble) Varies White Crystals In Water Liquid Varies White Plates (Solid) Varies Varies Purple Powder Colorless Viscous Liquid Liquid Gas or liquid Colorless Liquid Colorless Liquid Liquid above 167°F (75°C) In Water White Crystals Colorless Liquid Colorless to White Powder White Crystals Liquid White Crystals Colorless Liquid Colorless Liquid White powder Colorless Crystals Aggregate Aggregate Liquid Colorless crystal Solution in Water White Crystals or Powder Liquid Yellow Solution Gray to White Crystals Yellow Crystals Liquid In Water

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Alumina - Calcined (Conveyed Pneumatically) Alumina Trihydrate (Conveyed Pnuematically) Aluminum Acetate Aluminum Alkyl (ie Triethylaluminum) Aluminum Bromide Aluminum Chloride Solution Aluminum Chloride, Anhydrous

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

X X X X X X X 1 1 2 2 1 1 1 1 1 X X 1 1 1 1

1 2 2 2 1 1 2 X X X 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1

1 2 2 2 1 1 2 2 2 2 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

X 2 2 2 X X X X X 2 2 2 2 X X X X X -

X X X X 1 X X X X 1 X X X X X X X X X X X X X X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X 1 1 1 1 1 1

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

EPDM

1 2 2 2 2 -

2 X X X -

2 2 X X X X X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 2 1 1 1 1 1 1 1 2 1 2 1 1 2 2 X 2 2 1 1 1 1 2 2 1

X X 1 1 2 1 1 1 X 1 2 1 1 2 X X X X X X 1 1 1 1 1 2 1

1 1 1 X 2 2 1 1 X 1 X 2 2 X X X X X 2 X X 2 X X X

1 1 1 -

1 1 X 1 1 1 X X 1 X 1 X X X X 2 X X 2 X X -

X 1 2 2 X 2 1 1 2 1 X 2 1 2 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 X 1 1 1 1 1 1 X 1 X 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 X 1 1 1 1 1 1 X 1 X 1 1 1 1 1 1 1 1 1 1 1 -

X 1 2 2 2 1 1 1 1 2 2 1 1 1 1 1 -

1 1 X X X X X 1 1 X 2 1 1 1 1 1 1 1 1 1 -

X X X 1 1 2 2 1 2 1 1 1 X 2 2 2 X X X X X -

2 -

1 1

1 1 1

2 1

Hypalon

CPE

Nylon

PVC

™

1 2 2 1 1 2 X 2 2

™

1 1 1 1 1 1 1 1 1 1

Sanitron

Liquid Liquid Dark colored Liquid White to Yellowish Powder

UHMWPE

Baltic Types 100, 150, 200, 300, 500 Banvel (Ag Spray, Concentrated) Bardol B Barite (Natural Barium Sulfate)

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Colorless Liquid Colorless Liquid Colorless Liquid Straw to Purple Liquid Clear Straw Colored Liquid Colorless Liquid Clear Liquid White Crystals/Liquid > 73°F(23°C) Gas or Liquid Colorless Oily Liquid White Crystals Colorless Oily Liquid White Solid/Liquid > 108°F(42°C) Liquid Solid to Liquid Colorless to Reddish Brown Liquid Liquid White Powder Reddish-yellow Liquid White Crystal Colorless Liquid Fuming Yellow Liquid Colorless Gas Typically Colorless Liquids In Water In Acid Varies Varies Black Solid Black Liquid Black Liquid Black Liquid In Carbon Disulfide Brown Liquid Brown Liquid Brown Liquid Liquid Liquid Liquid Liquid

Polypro

Brass

Aluminum

Stainless Steel 316

Stainless Steel 304

NOTE: Ratings are for the effect on the polymer only!

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Amyl Acetate (Banana or Pearl Oil) Amyl Alcohol Amyl Chloride (Chloropentane) Amyl Chlorides (mixed) Amyl Chloronaphthalene Amyl Naphthalene Amyl Phenol Amylamine Amylbenzene (sec amylbenzene) Anethole (anise camphor) Anhydrous Ammonia (R 717) Aniline Aniline Dyes Aniline Hydrochloride Aniline Oil (Aniline) Animal Fat (Lard) Animal Gelatin Animal Grease, Inedible, Liquid Animal Oils Ant Oil (Furfural) Antifreeze (Glycol Base) Antimony Chloride (50%) Antimony Pentachloride Antimony Salts Aqua Ammonia (Ammonium Hydroxide) (30%) Aqua Regia (Nitrohydrochloric Acid) Argon, Compressed Aromatic Hydrocarbons Arsenic Acid Arsenic Trioxide Askarel (Transformer Oil) Asphalt Asphalt (Blown) Asphalt (Cut Back) Asphalt Emulsion Asphalt Paint Asphaltene ASTM Oil No. 1 ASTM Oil No. 2 ASTM Oil No. 3 ASTM Reference Fuel A ASTM Reference Fuel B ASTM Reference Fuel C ATF (Automatic Transmission Oil)

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

Iron/Carbon Steel

X 1 1 1 1 X 1 1

X 2 X X X X X

X 1 2 X X X

1 1 1 1 X

X 2 X X -

2 2 2 2 X X X 1 1 1 X 1 X 2 X X X X X X X X X X X X X

X X X X 2 2 2 2 2 2 X X X X X X X X X X X X X X X 2 - X X X 2 X X 2 X X X X X X NO HOSE AVAILABLE X X X X 2 X X X X 2 2 2 2 X 2 X X X X 2 1 X X 2 X 1 - 1 1 - X 2 X 1 - 2 X X X 2 X 1 1 1 1 1 2 2 1 2 2 2 2 2 X X X X X 1 1 1 1 1 2 X X X X - X X 2 2 X X 2 X X X X X X 2 X X - X - 1 2 X X 2 X 2 X X - X 2 X X 2 X 1 X X 1 X 1 X X 2 X 1 X X X X 1 X X 1 X 1 X X 2 X 2 X X X X 1 - X

1 2 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

X X X X 2 2 1 1 X 1 X X X X X X 2 2 X 1 X X -

2 2 2 1 1 1 1 1 2 1 X 1 1 X X 1 1 1 1 2 2 1

X X 1 1 1 1 X X 1 1 1 X 2 2 1 1 1 1 1 1 1 -

X X -

1 X -

2 -

X -

1 -

X -

X 1

X -

X X -

The world’s most trusted name in belts, hose and hydraulics.

145

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

1 X 1 1 X 1 1 1 1 1 1 X 1 1 1 - 1 - 1 - 2 1 X - X 1 1 1 1 1 1 1 - X X X X X 2 X X X X X - X X X 2 2 X 1 X X X X X X 2 X X X X 2 X X X X X - 1 X X X X X X X X X 1 2 X X X X X - 1 - 1 X - 1 2 X X 2 X 2 X X 2 2 2 X X 2 2 X X X X X - 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 - 1 1 X X 2 X X X X X 1 1 1 1 1 1 X - X - X X - X - X X - X X X X X X - X X - X 1 X X 2 X 2 X X X X X X X X X USE LPG HOSE ONLY

The Gates Rubber Company

1 1 1 1 X 1 X 1 1 1 X 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 X 1 1 1 X X 1 1 1 X 1

X 1 1 2 X 1 X X 2 2 X X X X 2 2 X 1 1 X X 1 X X X X -

X 1 1 1 2 X 1 2 X X 1 X 2 2 2 1 1 1 1 1 1 X X X 2 -

X 1 2 1 2 1 2 X 2 1 X 1 1 X X X 1 1 X

1 1 X 1 1 2 X X X X X X X X 1 X 1 1 X 1 1 1 1 2 2 1 X X X X X X -

Polypro

X 1 1 1 X 2 X X 2 2 X X 2 2 X X 2 2 2 1 1 1 X 1 1 X X X X X X X X -

Brass

SBR

1 1 1 2 X 1 2 X X 1 X 1 1 1 1 1 X 1 1 X X X X X X X -

Aluminum

NBR

UHMWPE 1 1 1 1 1 X 1 1 1 X 2 1 2 X 1 1 1 1 1 1 X X 1 2 2

™

Gatron 1 1 1 1 1 1 1 1 2 1 2 1 1 2 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 1 2 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Barium Carbonate White Powder Barium Chloride Colorless Crystals Barium Hydroxide White Powder Barium Sulfate White to Yellowish Powder Barium Sulfide Yellowish Green to Gray Powder Basic Copper Arsenate Blue to Green Powder BBP (Butyl Benzyl Phthalate) Clear Oily Liquid Beer Yellow Liquid Beet Sugar Liquors Colorless Solution Bellows 80-20 Hydraulic Oil Liquid Benzaldehyde (Benzoic Aldehyde) Colorless to Yellow Liquid Benzene (Benzol) Colorless to Yellow Liquid Benzenesulfonic Acid Liquid above 151°F (66°C) Benzidine Paste Benzoic Acid White Crystals Benzoic Aldehyde (Benzaldehyde) Colorless to Yellow Liquid Benzol (Benzene) Colorless to Yellow Liquid Benzophenone White Powder Benzotrichloride Colorless to Yellow Liquid Benzyl Acetate Water White Liquid Benzyl Alcohol Water White Liquid Benzyl Alcohol, Photo Inhibited Water White Liquid Benzyl Benzoate Water White Liquid Benzyl Chloride Colorless Liquid Bicarbonate Of Soda White Powder Bismuth Carbonate White Powder Bisphenol A White Flakes Bitumastic Liquid Black Liquor (RXN Product Pulpwood+NaOH) Black Alkaline Liquid Black Sulfate Liquor (See "Black Liquor") Black Alkaline Liquid Blast Furnace Gas (Cooled) Gas Bleach (Chlorinated Lime) White Powder (35-37% Cl) Bleach Liquor (Calcium Hypochlorite/H2O) Clear Solution Borax (Sodium Borate) White Crystals Bordeaux Mixture (Slaked Lime &Copper Sulfate) In Water Boric Acid White Powder or Colorless Scale Boric Oxide Colorless Powder Brake Fluid (Petroleum Base) Liquid Brake Fluid (Synthetic Base) Liquid Brine (Salt) Liquid Bromine Dark Reddish Brown Liquid Bromobenzene Colorless Liquid Bromochloroethane Colorless Liquid Bromochloromethane (Chlorobromomethane) Clear Liquid Bromotoluene Clear Liquid Bubble Bath Compounds Liquid Bunker Oil Liquid Butadiene (1,3) Gas Butanal (Butyraldehyde) Water White Liquid Butandiol (Butylene Glycol) Colorless Oily Liquid Butane (Gas) Colorless Gas

Stainless Steel 316

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

EPDM

Food & Bev. Mstr. S

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

146

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

2 X 2 1 X 1 X 1 1 X 1 1 1 1 1 1 1 1 1 1 1 2 X 1 1 2 1 1 1 -

1 1 1 1 1 1 X 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 -

1 1 1 1 1 1 X 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

X 1 1 X 1 1 1 1 1 1 -

1 2 2 X 1 1 1 1 1 2 X 1 1 2 1 1 1 1 1 -

1 1 1 1 1 X X 1 X 1 X 1 X 1 1 1 1 1 1 X 1 X 1 -

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

EPDM

NBR

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

1 1 2 1 2 1 -

1 2 2 1 2 1 1 1 1 X 2 1 -

1 2 2 1 1 X 1 2 X X X 1 -

USE LPG HOSE ONLY 1 1 1 2 1 - X X 2 - 2 2 X 2 2 X X 2 2 X X X X 2 1 1 1 2 1 X - X X - X 1 2 X X 2 2 2 - X - X X - X X - X X - X 2 X X X X X X X X X X X X X X 1 -

1 1 1 X X 1 X X 1 X 1 1 X 1 X 1 -

2 X X 2 X X 2 X X X -

1 2 1 1 1 1 2 1 1 2 2 2 1 -

1 X 1 1 X 1 -

1 1 1 1 1 X 1 1 -

1 1 1 2 1 1 1 1 X -

1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 2 -

1 X 1 X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1

1 1 X X X

1 1 1 1 1 -

1 1 1 1 1 1 2 1 1 -

X 1 1 1 X 1 1 1 1 1 1 1 1 1 1 2 2 -

X 1 1 X 1 1 1 1 1 1 1 1 1 1 1 X -

X 1 1 1 1 1 1 1 1 1 1 1 2 2

1 1 1 1 1 1 1 1 1 1 1 1

1 1 X 1 X X -

1 1 2 1 1 1 1 1 1 2 X 2 1

X 1 1 1 X X 2 -

X 1 1 2 1 1 2 2 1 2 X 1 X

2 1 1 1 1 1 1 1 1 1 1 1 2

X 2 1 1 X X

X 1 X 1 2 X 2 X X

1 1 1 1 1 1 1 1 1 1

™

1 1 1 1 1 2 1 1 1 1 1 1 2 1 -

™

Sanitron

UHMWPE

In Water or Alcohol White Crystals In Water In Water Solution Powder In Acid Crystals or Powder In Dilute Acid In Alcohol or Water Yellow Liquid In Water or Alcohol Solid White Powder Solid in H2O In Water or Alcohol White solid In Water or Alcohol In Water Yellow Liquid In Alcohol or Water Solid White Powder In Glycerol or Acids Solid White Crystals In Water or Alcohol

Gatron

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Form (at room temperature Chemical unless otherwise stated Butane (Liquid) Liquid Butanol (Butyl Alcohol) Colorless Liquid Butter Yellow to white semi-Solid to Liquid Butter Oil (Use FDA Hose) Yellow to white Liquid Butyric Acid Colorless Liquid Butyl Carbitol (Diethylene Glycol Butyl Ether) Colorless Liquid Butyl Cellosolve (EG Monobutyl Ether) Colorless Liquid Butyl "OxitolTM" for EG Monobutyl Ether Colorless Liquid Butyl Acetate Colorless Liquid Butyl Acrylate Colorless Liquid Butyl Alcohol (Butanol) Colorless Liquid Butyl Aldehyde Water White Liquid Butyl Benzyl Phthalate (BBP) Clear Oily Liquid Butyl Chloride Colorless Liquid Butyl Ether Colorless Liquid Butyl Ethyl Ether (Ethyl-n-Butyl Ether) Liquid Butyl Formate Colorless Liquid Butyl Mercaptan (2-Methyl-2-Butanathiol) Liquid Butyl Methacrylate Colorless Liquid Butyl Stearate Colorless Liquid Butylamine Colorless Liquid Butylene Glycol (Butandiol) Colorless Oily Liquid Butyraldehyde (Butanal) Water White Liquid Butyric Acid Colorless Liquid Butyric Anhydride Water White Liquid

Teflon

NOTE: Ratings are for the effect on the polymer only!

2 2 2 1 1 2 1 1 2 2 1 X X

X 1 2 1 1 2 2 1 1 2 1 1 1 2 2 1 X X

1 X 1 1 1 1 1 1 1 1 1 1 1 X X

1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 2 2

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Cadmium Acetate (Soluble in H2O & Alcohols) Cake Alum (Aluminum Sulfate) Cake Alum Solution (Al Sulphate up to 50%) Calcine Liquor (Radioactive Waste) Calcium Acetate Calcium Aluminate (Soluble in Acids) Calcium Aluminate (Tricalcium Aluminate) Calcium Arsenate Calcium Bisulfide (Calcium Hydrosulfide) Calcium Bisulfite (Calcium Hydrogen Sulfite) Calcium Bromide Solution Calcium Carbonate Calcium Carbonate Slurry Calcium Chlorate Calcium Chloride, Dry Calcium Chloride, Liquid (Not For Food) Calcium Chloride, Liquid, Food Grade 33% Calcium Hydrogen Sulfite (Calcium Bisulfite) Calcium Hydrosulfide (Calcium Bisulfide) Calcium Hydroxide (Hydrated or Slaked Lime) Calcium Hydroxide Solutions Calcium Hypochlorite Calcium Hypochlorite Solutions

Couplings / Adapters

Gates Hose / Polymers

SBR

Industrial Hose

The world’s most trusted name in belts, hose and hydraulics.

147

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

1 1 1 1 2

1 X 1 X -

X X 1 X

X X X X X 2 1 X

The Gates Rubber Company

1 1 1 1 2 1 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 2 X X X 1 1 1 1 1

2 1 2 1 1 1 X 1 X X X X 1 1 X 1 X 1 X 1 1 1 1 2 X X X

1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 X

X X X X 1 1 2 X 1 2 1 1

1 1 1 2 1 X X X 1 1 X 1 X X 1 1 X 1 X 1 1 2 2 X

1 1 1 1 1 X 1

2 2 X

X X X

X X 1 X

Polypro

1 1 1 1 1 1 1 1 1

2 2 1 2 1 1 1 1 1 - 1 2 2 1 2 - 1 1 - 1 1 1 1 2 1 2 1 - X 1 2 2 1 1 2 2 1 2 - 1 X X X X X X X X X 2 X X X X 2 X X X X 2 1 1 1 1 1 1 2 2 1 2 2 X X X X 2 X X 2 X X X X X X 1 1 1 1 1 X X X X 1 1 X X 1 2 X 2 1 2 1 2 2 2 1 - 1 X 1 1 2 2 X X 1 1 1 1 1 - 1 2 X X X X X - X X X X X X - X X - X NO HOSE AVAILABLE X X X X X X X X X X X X X X X

Brass

Fluorocarbon

EPDM 1 1 1 X 2 2 X 2 2 2 1 2 X 1 X 1 X 2 2 2 2 2 1 X X X X

Aluminum

Butyl

Sanitron 1 X 1 1 2 2 X 1 X 1 1 1 X X

Stainless Steel 316

Neoprene

UHMWPE 1 1 2 1 1 1 X 1 X 1 1 1 X

™

Gatron 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 2 2 2 1 X 1 1 1 2 1 1 1 2 1 X

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Calcium Metasilicate (Calcium Silicate) White Powder Calcium Nitrate Solutions In Water, Alcohol, or Acetone Calcium Oxide (Lime; quick,unslaked) White to Gray Lumps Calcium Silicate (Calcium Metasilicate) White Powder Calcium Stearate White Powder Calcium Sulfate White Powder or Crystals Calcium Sulfide Yellow to Gray Powder Calcium Sulfite (Soluble In Sulfurous Acid) In Acid Caliche Liquors (Sodium Nitrate) In Water Camphene (Liquid above 115°F (46°C) Liquid above 115°F (46°C) Cane Sugar Liquors In Water Caproic Acid Colorless or Yellow Liquid Caprolactam White Flakes Caprolactam, Molten (above 156°F (69°C) Liquid Caprylic Acid (Octanoic Acid) Colorless, Oily Liquid Carbamates Crystals Carbolic Acid Liquid above 109°F (43°C) Carbolic Acid (Phenol) White or Pink Crystals Carbolic Acid (Phenol, 82-95% in Creosols) Liquid Carbon Dioxide (Dry) Gas Carbon Dioxide (Wet) Gas with Water Vapor Carbon Disulfide Clear to Faint Yellow Liquid Carbon Monoxide Gas Carbon Tetrachloride (Pyrene) Colorless Liquid Carbonic Acid Liquid Carbonyl Chloride (Phosgene) Gas/ Liquid Casein (White amorphous solid) In Concentrated Acid Castor Oil Pale Yellow or Colorless Liquid Caustic Potash, Dry (Potassium Hydroxide) White pellets or flakes Caustic Potash, Liquid (up to 45%) Solution in Water Caustic Soda, Dry (Sodium Hydroxide) White beads or pellets Caustic Soda, Liquid (up to 73%) Solution in Water Cellosolve Acetate (Eg Ethyl Ether Acetate) Colorless Liquid Cellosolve Butyl (Eg Butyl Ether) Colorless Liquid Cellulose Solid, many forms Cement, Portland Gray Powder China-Wood Oil (Tung Oil) Yellow Oil Chlordane Colorless Viscous Liquid Chlorinated Napthalene (Chloronapthalene) Oily Liquid to Solid Chlorinated Solvents (ie Tetrchloroethane) Colorless Liquid Chlorine Gas Chlorine Liquid (Liquid @ 210 PSIG @ 120°F (38°C ) Clear Amber Liquid Chlorine Trifluoride Pale Green Liquid Chlorine Water (3% Chlorine) Clear, yellowish Liquid Chloroacetic Acid (Monochloroacetic Acid) Powder or White Crystals Chloroacetic Acid Under 100°F (38°C) Solid Chloroacetic Acid Solution In Water, Alcohol, Ether Chloroacetone Colorless Liquid Chloroacetyl Chloride Water White Liquid Chloroaniline Amber Liquid Chlorobenzene (Phenyl Chloride) (Monochlorobenzene) Clear Liquid

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

148

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

1 1 1 1 1 1 X X X 1 1 2 1 X X 1 1 1 1 X 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 X X 1

1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 X X 1

1 1 1 2 1 2 2 2 1 1 2 1 X 2 1 1 1

1 1 1 1 2 X X X 1 1 2 1 2 X 1 1 2 1

1 1 1 1 1 X 1 X 1 1 1 1 1 1 X

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

1 1 1 1 1 1 1

2 2 2 2

2 2 -

X X X

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X 1 1 1 1 1 1 1 1

1 2 1 X 1 1 X X 2 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 2 1 1 2 2 2 1

X 1 2 1 1 2 2 1 2 X 1 -

X 1 1 1 1 X 1 X X X 2 X 2 X 2 1 2 X 1 X X -

X X X X X X SPECIAL HOSE REQUIRED X X X X X X 1 X X X X X X 1 X X X X X X 1 X X NO HOSE AVAILABLE - X - X 2 X X X X X X 1 - 2 2 2 2 1 1 1 1 1 1 1 1 2 X X X X X 1 2 X X X X X 1 1 1 X X X X 1 1 X 1 2 X 2 2 1 2 1 X 2 X X 2 X 1 X 2 X X 2 X 1 - 2 X X 2 2 1 X X 1 2 1 2 X X X X 2 1 X X X X X X 1 - 2 2 1 - 2 2 2 2 2 1 2 2 2 2 2 2 1 1 1 2 2 1 1 1 2 1 2 2 1 2 1 - 1 - X 1 1 2 2 X X 2 2 1 2 2 2 2 2 2 2 2 2 - 1 1 - 2 X X X 2 1 - X X X X 2 1 X X X X X X 1 2 2 X X 1 1 X 1 X X 2 X 1 - 2 2 1 X 1 X X 2 X 1 1 - 2 2 1

X X X -

X X -

X 2 -

X X X X -

X 2 1 2 2 1 X 2 2 X 2 2 2 2 1 1 1 X 2 2 X X X 2 X 2

X 1 1 1 1 2 2 2 1 1 2 2 1 1 2 2 -

1 1 1 X X X X X 1 X X X X X -

X 1 1 1 X X X X 1 X 2 2 1 1 X X 2 1 1 1 1 1 X 1 1 -

The world’s most trusted name in belts, hose and hydraulics.

Polypro

Fluorocarbon

EPDM X

Brass

Butyl

Sanitron X

Aluminum

Neoprene

UHMWPE X

™

Gatron 2

™

Teflon

Form (at room temperature Chemical unless otherwise stated Chlorobromomethane (Bromochloromethane) Clear Liquid Chlorodifluoromethane (Freon 22) Gas Chloroethane (Ethylene Dichloride) Colorless Liquid Chloroform Colorless Liquid Chloronapthalene (Chlorinated Napthalene) Oily Liquid to Solid Chloropentane (n-amyl chloride) Colorless Liquid Chlorophenol In Benzene, Alcohol, Ether Chloropicrin Mixture Colorless Liquid Chloropropylene Oxide (Epichlorohydrin) Volatile Liquid Chlorosulfonic Acid Colorless to Light Yellow Liquid Chlorothene (TM for chlorinated solvents) Colorless Liquid Chlorotoluene Colorless Liquid Chlorox Colorless Liquid Chocolate Syrup Liquid Chrome Alum (Chromium Potassium Sulfate) In Water Chromic Acid (100%) Dark Red Crystals Chromic Acid (25% Solution or less) In Water Chromic Acid (50% Solution with water) In Water Chromic Acid (Chromium Trioxide) Purplish-Red Crystals Chromic Chloride In Water Chromium Trioxide (Chromic Acid) Purplish-Red Crystals Cider Liquid Cinene (Dipentene) Colorless Liquid Citgo FR Fuels Liquid Citric Acid Solution In Water Coal Gas (Coke Oven Gas, Max 120°F (49°C) Gas Coal Tar Black, viscous Liquid Coal Tar Pitch (Roofing) Liquid above 212°F (100°C) Cobalt Nickel Plating Solution Liquid Cocoa Butter (Theobroma Oil) Liquid above 95°F (35°C) Coconut Oil Liquid above 77°F (25°C) Cod Liver Oil Pale Yellow Liquid Coke Oven Gas (300°F (149°C) or less) Gas Copper Arsenate (Cupric Arsenate) In Dilute Acid Copper Chloride (Cupric Chloride) In Water Copper Cyanide (Cupric Cyanide) In Dilute Acids or Alkalies Copper Nitrate (Cupric Nitrate) In Water Copper Sulfate (Cupric Sulfate) In Water Copper Sulfide (Soluble in Nitric Acid) In Nitric Acid Corn Oil Pale Yellow Liquid Corn Syrup (Glucose Syrup) Clear Liquid Cottonseed Oil Liquid, several colors Creosote (high Napthalene/Anthracene) Liquid Cresol (Methyl Phenol) Liquid above 95°F (35°C) Cresylic Acid Liquid Crotonic Acid (Methylacrylic Acid) White Crystalline Solid Crude Oil (Crude Petroleum Oil) Liquid Crude Wax Liquid above 200°F (93°C) Cryolite (Greeland Spar) In Sulfuric Acid Cumene (Isopropyl Benzene) Colorless Liquid Cupric Arsenate (Copper Arsenate) In Dilute Acid

Stainless Steel 316

Stainless Steel 304

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

Iron/Carbon Steel

1 1 1 1 X X X X X X 1 1 1 1 1 X X X 1 1 1 2 2 1 1 1 1 1

1 1 1 1 1 2 X X X X X X 1 1 1 1 1 X 1 1 1 1 1 1 1 1 X 1 1 1 1

1 1 1 1 1 1 X 2 2 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 X X X X X 1 1 1 2 X 1 1 1 1 1 1 -

1 1 1 1 X X X X X X 1 1 X X X X 1 1 X 1 1 1 -

X X X 1 X 1 1 1 1 1 2 1 1 1 1 1 X 1 2 2 1 1 X -

149

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

150

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

1 1 1 1 1 1 1 1 1 1 1 1 1

X X X 2 1 1

X X X X 1 1 1 X X 1 1 1

1 1 1 1 X 1 1 1 1 1 X 1 X -

2 X X - X 1 X - X - X X 1 - X X X 2 X - X - X X 1 - 1 1 1 1 1 1 1 1 1 1 X X 2 1 - 2 2 2 2 1 - X 1 - 1 X 1 X X X X 2 X X 2 2 2 X 1 1 1 1 1 - 1 1 1 X X X X 2 X X X X X 2 X X X X X 2 2 X X X X X X X X X X 2 1 X - 2 - X X X X - X X 2 X X X X X 1 X X X X X 1 X X X X X 1 SPECIAL HOSE REQUIRED X X X X X X 2 - X - X - X -

X X 2 X 2 1 1 2 X 2 1 X X X X X X X X

2 1 1 1 1 1 2 1 2 X 2 X X X

1 1 1 1 1 1 1 -

X 1 1 1 1 2 1 X X 1 2 1 X X X X

X X

X -

2 1 2 1 1 X 1 1 1 -

1 1 1 1 1 1 1 2 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 X 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 2 2 -

2 1 2 X 2 2 1 X X X 1 X X -

2 2 1 1 1 1 1 2 2 1 2 2 X 2 2 X X -

2 2 2 2 X 2 2 1 X X X X X -

2 2 2 2 X 2 2 1 X X X X X X X -

2 2 1 1 2 X X 2 1 1 1 X 2 X 2 X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 1 1 2 1 X 1 1 1 1 1 1 1 1 2 2 2

2 1 1 1 -

X 1 1 1 X X X

X 1 1 1 X 1 2 1 1 2 1 X X X X X X

1 1

2 -

X -

™

1 -

™

1 1 1 1 2 1 1 1 1 2 2 1 2 -

Neoprene

X 1 1 1 1 1 1 1 1 1 1 1 1

X X X 1 1 1 2 1 1 1

SBR

1 1 1 1 1 1 1 X X X X -

NBR

X X 1 1

EPDM

Colorless Oily Liquid Colorless Liquid

2 1 1 1 1 1 1 2 2 -

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

Gas, Liquid @ 140 PSIG @ 100°F

2 2 1 1 X 2 1 1 X 2 X X X X X -

Sanitron

Colorless Liquid Colorless to yellow Liquid Colorless, water white Liquid Colorless to yellow Liquid Orange Liquid Colorless Liquid In Water Liquid Brown Liquid Yellow or White Powder Colorless Liquid Colorless Liquid In Water In Petroleum Solvents Colorless Liquid Colorless Liquid Colorless Oily Liquid Colorless Liquid Clear Colorless Liquid Colorless Liquid In Alcohol or Benzene Colorless Liquid White Crystals Colorless Liquid

1 1 1 1 1 1 1 1 1 X X 1 2 X 2 1

UHMWPE

Decalin (TM for decahydronapthalene) Decanal (Decyl Aldehyde) Decanol (Decyl Alcohol) Decyl Aldehyde (n-decanal) Deicing Fluid (ethylene or propylene glycol) Denatured Alcohol Detergent Sol. (Sodium dodcylbenzenesulfonate) Developing Solutions (Hypos) Dextron Dextrin (Starch gum) Diacetone Diacetone Alcohol Diammonium Phosphate Diazinon Dibenzyl Ether Dibutyl Ether Dibutyl Phthalate Dibutylamine Dibutylsebacate Dichloroacetic Acid Dichloroaniline Dichlorobenzene (ortho) Dichlorobenzene (para) Dichlorobenzyl Chloride Dichlorodifluoromethane (Freon 12) Dichloroethane (Ethylene Dichloride) Dichloroethyl Ether

2 2 1 2 X 2 2 1 X X X 1 X X X X -

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated In Water In Dilute Acids or Alkalies In Water In Water Liquid Liquid Liquid In Dilute Acids or Alkalies In Water In Water In Nitric Acid In Water Colorless Liquid Colorless, oily Liquid Colorless to yellow Liquid Colorless Liquid Colorless Liquid Colorless Liquid Water white Liquid Colorless Liquids Colorless Liquid

Butyl

NOTE: Ratings are for the effect on the polymer only!

Cupric Chloride (Copper Chloride) Cupric Cyanide (Copper Cyanide) Cupric Nitrate (Copper Nitrate) Cupric Sulfate (Copper Sulfate) Cutting Oil (Mineral Oil Base) Cutting Oil, Sulfur Base Cutting Oil, Water Soluble Cyanide, Copper (Cupric Cyanide) Cyanide, Mercuric Cyanide, Potassium Cyanide, Silver Cyanide, Sodium Cyclohexane Cyclohexanol Cyclohexanone Cyclohexylamine Cyclopentane Cyclopentanol Cyclopentanone Cymene Cymene (Isopropyltoluene)

Couplings / Adapters

Gates Hose / Polymers

The Gates Rubber Company

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Fluorocarbon

X X X X X X X 2 X X X 1 X X X 1 X X 1 X X X X X X X X -

X X X X X X X X 2 X X X X X X X X X 1 X 1 X 1 X X X 2 X X X X X X -

X X X X X 2 X X X X X 1 X X 1 X 1 X X X X X X X X -

X X X X X X 1 X 1 2 2 X 2 2 2 X 2 2 1 X 1 1 2 X 1 1 1 2 2 2 2 2 2 -

1 1 2 1 2 X X X X 2 X 1 1 X X 1 1 1 1 1 X 1 X 1 X X X 1 X X 1 X X 1 X 1

Polypro

Butyl

X X X X X 1 2 X X X X X X X X 1 1 X 2 X X 2 X X X X X X -

Brass

Neoprene

X X X X X X X 2 X 2 X 1 X 2 2 1 1 1 1 1 1 1 1 1 1 1 X 1 1 X 2 1 X 1 2 2 X -

Aluminum

X X X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X 1 X 1 1 1 1 -

Stainless Steel 316

SBR

UHMWPE X X 2 1 2 1 1 2 1 -

™

Gatron 2 X 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Dichloroethylene Colorless Liquid Dichloroethylene (Acetylene Dichloride) Colorless Liquid Dichloromethane (Methylene Chloride) Colorless Liquid Dichloropentane Light Yellow Liquid Dichloropropane (Propylene Dichloride) Colorless Liquid Dicyclohexylamine Colorless Liquid DIDA (Diisodecyl Adipate) Light Colored Oily Liquid Diesel Fuel Liquid Diethanolamine (20%) In Water or Alcohol Diethanolamine Liquid above 83°F (29°C) Diethyl Ether (Ethyl Ether) Colorless Liquid Diethyl Ketone Colorless Liquid Diethyl Oxalate Colorless Oily Liquid Diethyl Phthalate (Ethyl Phthalate) Water White Liquid Diethyl Sebacate Diethyl Sulfate Colorless Liquid Diethyl Sulfide (Ethyl Sulfide) Colorless Oily Liquid Diethylacetaldehyde (Ethylbutyraldehyde) Colorless Liquid Diethylamine Colorless Liquid Diethylbenzene Colorless Liquid Diethylene Dioxide (1,4 Dioxane) Colorless Liquid Diethylene Ether (Dioxane) Colorless Liquid Diethylene Glycol (Dihydroxydiethyl Ether) Colorless Syrupy Liquid Diethylene Glycol Methyl Ether (Methyl Cellosolve) Colorless Liquid Diethylene Glycol Monobutyl Ether Colorless Liquid Diethylene Glycol Monobutyl Ether Acetate Colorless Liquid Diethylene Glycol Monoethyl Ether Colorless Liquid Diethylene Glycol Monomethyl Ether Colorless Liquid Diethylene Glycol Monomethyl Ether Acetate Colorless Liquid Diethylenetriamine Yellow Liquid Dihydroxyacetone In Water Dihydroxydiethyl ether (Diethylene glycol) Colorless Syrupy Liquid Diisobutyl Ketone Colorless Liquid Diisobutyl Phenol (Octyl Phenol) White Flakes Diisobutyl Phthalate Liquid Diisobutylene Colorless Liquids Diisodecyl Adipate (DIDA) Light Colored Oily Liquid Diisooctyl Phthalate (DIOP) Nearly Colorless Liquid Diisopropanolamine Liquid above 108°F (42°C) Diisopropyl Ketone Colorless Liquid Diisopropylamine Colorless Liquid Diisopropylbenzene (meta) Colorless Liquid Diisopropylidene Acetone (Phorone) Yellow Liquid Dilauryl Ether Liquid above 92°F (33°C) Dimethyl Acetamide (DMAC) Colorless Liquid Dimethyl Aniline Yellow/brown Oily Liquid Dimethyl Ether Liquid under Pressure Dimethyl Formamide Water White Liquid Dimethyl Phthalate Colorless Oily Liquid Dimethyl Sulfate (Methyl Sulfate) Colorless Liquid Dimethyl Sulfide Colorless Liquid

Stainless Steel 304

Iron/Carbon Steel

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

X X X X X X X 2 X X X X X X X X X X X X X X X X X X X -

X X 1 1 2 2 2 2 2 1 1 1 2 1 2 1 -

1 X 1 1 1 1 1 1 1 1 -

X X 2 2 X X X X 1 1 1 -

1 1 1 1 2 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 -

1 1 X X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

X X 2 1 1 1 1 1 1 1 1 -

NBR

Food & Bev. Mstr. P

EPDM

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

The world’s most trusted name in belts, hose and hydraulics.

151

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

152

EPDM

NBR

SBR

Neoprene

Butyl

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

1 X 1 X 1 1 1 1 1 X 1 1 -

1 X 1 1 X 1 1 1 1 1 1 X 1 1 1 1 1 X X X X 1 1 1 1 -

2 X 1 2 X 1 X X 1 2 2 X 1 1 1 X 1 X X X X 1 2 1 1 1 X

X X 1 X X X X X X X 1 X X 1 X 1 1

X X 2 X X X X X X X X X -

X 2 X X X X X X X X X X -

X X 2 X X X X X X 1 X -

X X 1 2 X 2 1 2 2 X X X X 1 X

1 1 1 1 1 X X 1 1 1 X 1 1 1 1 X X X X 1 1 X 1 1 1 1 1 X 1 1 1 1 1 1 -

X 2 X X X X X X X 1 X -

X 1 1 2 X 2 2 X 2 1 -

X 1 1 1 1 1 1 X 1

X 2 X X X X X X 2

1 1 1 1 1 1 1 1 1 1 1 2 1

1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1

2 1 1 1 1 1 1 1 1 1 1

1 1 2 X 1 1 1 1 -

1 1

X -

™

1 1 1 1 X 1 1 2 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 2 1 1 X 2 1 2 1 1 1 1 1

™

Sanitron

UHMWPE

Colorless Liquid Colorless Crystals

Gatron

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Form (at room temperature Chemical unless otherwise stated Dimethyl Sulfoxide Colorless Liquid Dimethyl Terephthalate Colorless Crystals Dimethylamine (DMA) Liquid @ 70 PSIG @ 120°F (49°C) Dimethylaminoethanol (Dimethylethanolamine) Colorless Liquid Dimethylaminomethyl Phenol (DMP) Dark Red Liquid Dimethylbenzene (DMB) Colorless Liquid Dimethylcarbinol (isopropyl alcohol) Colorless Liquid Dimethylcyclohexylamine Water White Liquid Dimethylformamide (DMF) Water white Liquid Dimethylketone (Acetone) Colorless Liquid Dimethylphenol (Xylenol) White solid, liquid @ 68°F (20°C) Dinitrobenzene (Soluble in Chloroform) In Chloroform Dinitrogen Tetroxide (Nitrogen Dioxide) Liquid @ 50 PSIG @ 120°F (49°C) Dinitrotoluene, Solid In Alcohol or Ether Dioctyl Adipate di (2-ethylhexyl) adipate Light Colored Oily Liquid Dioctyl Phosphite, di-(2-ethylhexyl) phosphite Colorless Liquid Dioctyl Phthalate, di-(2-ethylhexyl) phthalate Light Colored Liquid Dioctyl Sebacate, di-(2-ethylhexyl) sebacate Pale Straw Colored Liquid Dioctylamine di-(2-ethylhexyl)amine Water White Liquid DIOP (Diisooctyl Phthalate) Nearly Colorless Liquid Dioxane (Diethylene Dioxide) Colorless Liquid Dioxane (Diethylene Ether) Colorless Liquid Dioxolane (Ethylene Glycol Formal) Water White Liquid Dipentene (Cinene, Limonene) Colorless Liquid Diphenyl Phthalate Yellow White Powder Dipropyl Ketone Colorless Liquid Dipropylamine Water White Liquid Dipropylene Glycol Colorless Liquid Dipropylene Glycol Monomethyl Ether (DPM) Colorless Liquid Dirco Oils Liquid Disodium Phosphate (DSP soluble in H2O) Colorless or White Powder Disodium Phosphate Solution In Water Distillate Fuel Oil Clear to Brown Liquid Divinylbenzene (20-25% or 50-60% Grades) Water White to Straw Liquid DMA (Dimethylamine) Gas DMAC (Dimethyl Acetamide) Colorless Liquid DMB (Dimethylbenzene) Colorless Liquid DMF (Dimethylformamide) Water white Liquid DMP (Dimethylaminomethyl phenol) Dark Red Liquid Dodecylbenzene (Detergent Alkylate) Liquid Dodecylphenol Straw Colored Liquid Dolomite Gray, Pink or White Powder Dowtherm A (Biphenyl and Biphenyl Ether Mix.) Liquid Dowtherm SR-1 (Ethylene Glycol) Liquid DPM (Dipropylene Glycol Monomethyl Ether) Colorless Liquid Duro Oils Liquid

Teflon

NOTE: Ratings are for the effect on the polymer only!

EDB (Ethylene Dibromide) EDTA (Ethylenediaminetetraacetic Acid)

Couplings / Adapters

Gates Hose / Polymers

The Gates Rubber Company

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Fluorocarbon

X 1 2 X X X X X 1 X X X X X 2 X X 2 X X X -

X 1 2 X X X X X 1 X X X X X X X X X 2 X X X X 2 X X 1 X -

1 2 1 2 X X X X X 1 X X X X X X X X X X X 1 X X 1 1 X X 1 -

2 1 2 2 2 2 X X 1 X X X 2 X 2 X X X 2 X 2 X 2 2 X 1 1 2 X 1 -

1 1 X X 1 1 X X X X X X 1 2 1 1 1 X X 1 2 1 X 1 1 X 1 1 X 1 1 1 X 1 2 1 X -

Polypro

Butyl

1 1 2 2 X X X X 1 X X 2 X X X X X X X X X X X X X X X 1 X X 1 1 X X 1 X X X

Brass

Neoprene

1 X X 1 X 1 2 1 2 2 2 2 1 X X X X 2 2 X X X 2 2 X X 2 1 X 1 1 1 X X 1 1 1 2

Aluminum

1 X X X 1 1 1 2 2 2 1 1 1 1 1 1 2 X 1 1 1 1

Stainless Steel 316

SBR

UHMWPE 1 1 1 X X 1 2 X 1 1 1 2 1 -

™

Gatron 1 1 2 2 1 2 1 1 1 2 2 1 2 1 2 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 2 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Emulsion (Oil in Water) Water is Continuous Phase Enamels Liquid Epichlorohydrin (Chloropropylene Oxide) Volatile Liquid Epoxy Resin Solid Pellet Essential Oils Liquid Ethanol (Ethyl Alcohol) Colorless Liquid Ethanolamine (Aminoethanol) Colorless Viscous Liquid Ethers Liquids Ethyl Acetate (Acetic Ether) Colorless Liquid Ethyl Acetoacetate Colorless Liquid Ethyl Acrylate Colorless Liquid Ethyl Acrylate, Inhibited Colorless Liquid Ethyl Alcohol (Ethanol) Colorless Liquid Ethyl Aluminum Dichloride 90°F (32°C) Clear Yellow Liquid Ethyl Bromide Colorless Liquid Ethyl Butyl Ether (Butyl Ethyl Ether) Liquid Ethyl Butyrate Colorless Liquid Ethyl Chloride Compressed Liquid Ethyl Chloroformate (Ethyl Chlorocarbonate) Water White Liquid Ethyl Ether (Diethyl Ether) Colorless Liquid Ethyl Ether Acetate (Cellosolve Acetate) Colorless Liquid Ethyl Formate Water White Liquid Ethyl Iodide Colorless Liquid Ethyl Isobutyrate Colorless Liquid Ethyl Mercaptan (Ethanethiol) Colorless Pungent Liquid Ethyl Methyl Ketone (MEK) Colorless Liquid Ethyl Oleate Light Yellowish Liquid Ethyl Oxalate Colorless Liquid Ethyl Pentachlorobenzene Ethyl Phthalate (Diethyl phthalate) Water White Liquid Ethyl Propionate Water White Liquid Ethyl Propyl Ketone (3-Hexanone) Colorless Liquid Ethyl Silicate Colorless Liquid Ethyl Sulfide (Diethyl Sulfide) Colorless Oily Liquid Ethylamine Colorless Liquid or Gas Ethylbenzene Colorless Liquid Ethylbutanol (2-Ethylbutyl Alcohol) Colorless Liquid Ethylbutyl Alcohol (Ethylbutanol) Colorless Liquid Ethylbutyl Amine Water White Liquid Ethylbutyl Ketone Clear Liquid Ethylbutyraldehyde (Diethylacetaldehyde) Colorless Liquid Ethylcellulose Granular Solid Ethylene Chlorohydrin Colorless Liquid Ethylene Cyanohydrin Straw Colored Liquid Ethylene Dibromide (EDB) Colorless Liquid Ethylene Dichloride (Chloroethane) Colorless Liquid Ethylene Glycol Colorless Liquid Ethylene Glycol Formal (Dioxolane) Water White Liquid Ethylene Glycol Monoethylether Colorless Liquid Ethylene Glycol Monoethylether Acetate Colorless Liquid Ethylene Glycol Monomethyl Ether Colorless Liquid

Stainless Steel 304

Iron/Carbon Steel

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

1 X 2 X X X X 1 X X 2 X X X X X X X X X 2 2 X 2 -

1 1 1 2 1 2 2 1 2 1 1 2 1 2 1 1 2 1 1 1 X 1 -

1 1 1 1 1 1 2 1 1 1 X X -

2 2 2 2 2 X X X 2 X X X 1 X X 1 1 X X X 1 -

1 1 1 1 1 1 1 1 1 1 2 2 1 2 2 1 1 1 2 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 2 1 1 1 1 2 1 2 1 1 1 1 1 1 1 1 1 -

1 1 2 2 X X X 1 X 1 1 1 -

NBR

Food & Bev. Mstr. P

EPDM

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

The world’s most trusted name in belts, hose and hydraulics.

153

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

154

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

1 -

2 X X 2 2 2 1 1 1 1 1 1 1 1 1 - 1 2 - 1 2 1 1 2 - 1 2 1 1 - 2 1 2 2 1 - 1 1 1 1 - 1 2 2 - 2 2 1 1 - 1 1 1 2 - 2 2 2 2 - 2 2 1 1 1 1 1 1 1 1 - X 1 - 2 1 - 2 2 2 2 - 1 - 2 2 2 - 2 2 2 1 1 NO HOSE AVAILABLE 2 X - 2 X 1 1 1 2 X X 2 2 1 1 2 X X 2 2 1 - X X 2 - X X 1 2 X X 1 - X - 1 SPECIAL HOSE REQUIRED SPECIAL HOSE REQUIRED SPECIAL HOSE REQUIRED

X 2 2 2 1 2 2 2 2 1 2 2 2 -

2 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 X

2 1 1 1 1 1 2 1 2 1 X X 1

2 2 2 2 -

1 1 1 1 -

X 1 1 1 X X -

X 1 1 X -

2 X X X X X X X X X 1 1 X X X -

1 X X 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 -

1 X X 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 -

1 X X X X X 1 1 1 2 2 -

2 X X X X 2 2 X 1 1 1 1 2 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 2 1

1 2 1 2 1 2 1 1

X 1 1 X X 1

1 1

X -

Solid, Semisolid or Liquid C8-11 Liquids, >C11 Solids C11 or Less are Liquids Red Crystals Black-Brown Solid Liquid Violet Crystals Liquid Yellow Crystals or Gray Powder Liquid Liquid in H2O or Alcohol Greenish-White Crystals Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Gray, Brownish, Black Varies Colorless Liquid Colorless Liquid Pale Yellow Gas Yellow Liquid Colorless Liquid Gas Liquid Liquid Colorless Oily Liquid Colorless Liquid (bp 100°C) Liquid Brown Liquid Gas or Liquid Gas or Liquid Gas or Liquid

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

2 1 1 1 1 1 1 1 1 1 X

2 1 1 1 X 1 -

2 1 1 1 2 2 2 1 X X 2 1 X

1 1 1 1 1 1 1

1 1 2 1 1 1 1 1

1 1 1 -

1 1 1 1 -

™

1 1 1

™

1 2 1 1 1 1 1 1 2 1

Neoprene

SBR

1 -

NBR

1 -

EPDM

1 X 1

Sanitron

1 1 1

UHMWPE

1 1

1 1 1 1 1 1 1 1 1 1

X -

Gatron

Fatty Acid Fatty Alcohol, Blend Fatty Petroleum Alcohol Ferric Bromide Ferric Chloride Ferric Chloride solution Ferric Nitrate Ferric Nitrate Solution Ferric Sulfate Ferric Sulfate Solution Ferrous Acetate Solution Ferrous Chloride Ferrous Chloride, Solution Ferrous Nitrate Ferrous Sulfate Solution Fertilizer (Liquid Manure) Finishing Oil Fire-Resistant Hydra-Fluid (Texaco) Firtec 290, MF Fish Oil Fixing Solution (Photo) Flint Floor Wax (Temperature Dependent) Fluoboric Acid (48% Purity) Fluoboric Acid (up to 48%) Fluorine Fluorine (Liquid) Fluosilicic Acid (50%) Formaldehyde Formaldehyde Solution (up to 50%) Formalin (37-50% HCHO with 15% MeOH) Formamide Formic Acid FR Fluid D FR Hydraulic Fluid Freon 12 (Dichlorodifluoromethane) Freon 13 Freon 134a (HFC 134a)

X 1 1 X X 1

Teflon

Chemical

2 1 1

(at room temperature unless otherwise stated Colorless Liquid Colorless Liquid Colorless Crystals Colorless Liquid Colorless Liquid Colorless Liquid Liquid Water White Liquid Liquid Colorless Liquid

Form

Butyl

NOTE: Ratings are for the effect on the polymer only!

Ethylene Glycol N-Butyl Ether Ethylenediamine Ethylenediaminetetraacetic acid (EDTA) Ethylhexaldehyde Ethylhexanediol Ethylhexanol (2-ethylhexyl alcohol) Ethylhexoic Acid Ethylhexyl Acetate Ethylhexyl Acrylate Ethylhexyl Alcohol (Ethylhexanol)

Couplings / Adapters

Gates Hose / Polymers

The Gates Rubber Company

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Fluorocarbon

Polypro

Butyl

Brass

Neoprene

™

X X X X X X X 1 -

2 1 2 2 1 1 1 1 1

2 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 -

2 2 -

1 1 1 2 1 1 -

1 X 1 2 2 2 1 -

In Alcohol or Glycerol In Alcohol Solution Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Flakes or Powder Clear Colorless Liquid White Crystals Crystals or Powder Aqueous Solution Crystals to White Powder Liquid Varies Clear Viscous Liquid Clear Viscous Liquid Liquid above 80°F (27°C) Liquid Watery suspension Clear Colorless Liquid White Crystals Powdered, Flake, Crystals Semi-Solid Liquid Liquid

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 2 1 1 2 1 1 1

1 1 X X X X X 1 1 1 1 1 2 -

1 X X X X 2 1 1 X 1 1 1 1 1 X 1

X X 2 2 2 2 X 1 2 1 1 1 1 1 2

2 2 X X X X 1 1 X 1 1 1 X 1

2 2 X X X X 1 1 X 1 1 X 1 1 1 1 X 1

X X 2 2 2 2 X 1 2 1 1 1 2 1

2 2 X X X X X X 1 X 1 1 1 1 1 X 1

1 1 1 1 1 1 X 1 1 1 1 1 1 1 -

X X X X 2 1 1 1 1 1 2 1

1 1 1 X 1 1 1 2

X X 1 1 1 1 1 X 2 1 1 -

X X X X X X 1 X 1 1 1 1 1 1 -

X X 2 2 2 2 1 1 2 2 2 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 X 1 1 1 1 1 -

1 1 X X -

Oils to Waxy Solid Liquid Liquid Black to Brick Red Liquid

1 1 1 1 1

1 1 1 1

1 1 1

X X X X

X -

X 1 -

X -

1 1 1 1

1 1 1

Gatron

Teflon

Hypalon

2 1 1 1 1 1 1 1 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1

EPDM

Halowax (Chlorinated Hydrocarbons) HEA (2-Hydroxyethyl Acrylate) HEA Acid (2-Hydroxyethyl Acrylate) Hematite (Iron Ore) HEP (2-Hydroxypropyl Acrylate 1 Petroleum hose only.

Sanitron

Gallic Acid (3,4,5 Trihydroxybenzoic Acid) Gallic Acid Solution Gasohol (Gasoline blended with Ethanol)¹ Gasoline (Oxygenated - Blended With MTBE)¹ Gasoline (Unleaded Up to 50% Aromatics)¹ Gasoline (White)¹ Gelatin Glacial Acetic Acid Glacial Methacrylic Acid (GMAA) Glauber's Salt (Sodium Sulfate Decahydrate) Gluconic Acid (Commercial 50% Aqueous) Glucose Glucose Solution Glue Glycerine (Glycerol) Glycerol (Glycerine) Glycerol Monolaurate Glycol FR Fluids Glycol Slurry Glycols (ie Ethylene Glycol) GMAA (Glacial Methacrylic Acid) Graphite Grease Grease, Silicone Base Green Liquor (Effluent Alkaline Pulping) Green Sulfate Liquor

SPECIAL HOSE REQUIRED SPECIAL HOSE REQUIRED X 1 X X 2 X 1 2 - 2 2 1 2 1 2 2 1 X X X X X X X X X X 2 X 2 X X X X 2 X 1 X X X X X X 1 2 2 2 2 2 2 1 1 1 1 1 X 1 1 X 1 -

(at room temperature unless otherwise stated Gas or Liquid Clear Liquid Liquid Water White to Brown Liquids Colorless Crystals Liquid Colorless to Brown Liquid Colorless to Reddish Brown Liquid Colorless to Brown Liquid Colorless to Brown Liquid Colorless to Reddish Brown Liquid Colorless Liquid -

Chemical

UHMWPE

Form

Aluminum

Stainless Steel 316

Stainless Steel 304

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Freon 22 (Chlorodifluoromethane) Freon 23 Fruit Juices Fuel Oil (ASTM 1-6) Fumaric Acid Fumaric Acid Solution (Allomalaic Acid) Furan (Furfuran) Furfural (Ant Oil) Furfural Alcohol Furfuran (Furan) Furfuryl Alcohol Fusel Oil (Amyl Alcohol, Grain Oil) Fyrguard 150, 200 Fyrquel 15R&O, 220R&O, 550R&O Fyrquel 90, 150, 220, 300, 550, 1000

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

PVC

X 2 2 2 -

1 1 1 1 1 1 -

1 1 1 1 1 -

The world’s most trusted name in belts, hose and hydraulics.

155

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

2 1 1 1 1 X 2 1 X 2 1 X 1 1 1 1 1 1 1 1 X 1 1 1 X X X 1 X X X X X

X X 1 X X X X 1 X 2 X X X 2 2 2 2 2

X X 1 1 1 X 1 1 X X X X X 1 1 X 2 X X X 2 2 2 2 2

X 2 1 2 2 1 1 X 2 1 X X X X X X X X

X X 1 X X 2 X 2 X 1 1 X 1 1 X X X 1 X 1 1 X 2 2 2 X 2 2 2 2 -

1 1 1 1 1 1 1 X 1 1 1 X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X 1 1 1 1 1 1

The Gates Rubber Company

X 1 X X X X 1 2 X X X 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X X -

Polypro

X X 1 X 1 X X X X X 1 1 1 1 X 1 X X X X 1 X 1 X 2 2 2 X X 1 2 X -

Brass

SBR

X X 1 X 1 X X X 1 1 1 1 1 1 -

Aluminum

NBR

UHMWPE 1 1 1 1 1 1 1 1 1 1 1 1 1

™

Gatron 2 2 1 1 1 X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Heptachlor (In Xylene) Liquid Heptanal (Heptaldehyde) Colorless Oily Liquid Heptane Colorless Liquid Heptanedicarboxylic Acid (Azelaic Acid) Yellowish to White Powder Heptanoic Acid Clear Oily Liquid Heptanol Colorless Liquid Hexachlorocyclohexane White to Yellowish Flakes Hexachlorocyclopentadiene Yellow Liquid Hexadecanoic Acid (Palmitic Acid) White Crystals Hexahydrophthalic Anhydride Clear Colorless Viscous Liquid Hexaldehyde Colorless Liquid Hexamethylenediamine, Solution Colorless Flat Solid Leaflets Hexamethyleneimine Clear Colorless Liquid Hexane Colorless Liquid Hexanol (Hexyl Alcohol) Colorless Liquid Hexanone (Ethyl Propyl Ketone) Colorless Liquid Hexene Colorless Liquid Hexyl "Cellosolve" (EG monohexyl ether) Water White Liquid Hexyl Alcohol (Hexanol) Colorless Liquid Hexyl Methacrylate Liquid Hexylamine Water White Liquid Hexylene (1-Hexene) Colorless Liquid Hexylene Glycol Colorless Liquid Honey Yellow Liquid Houghto-Safe 1055, 1110, 1115, 1120, 1130 Liquid Houghto-Safe 271, 416, 520 & 616, 620 Liquid Houghto-Safe 5046 Liquid Houghto-Safe 625, 640 & 525 Under 100°F (38°C) Liquid HPA Acid (2-Hydroxypropyl Acrylate) Liquid HPO (Sodium Thiosulfate) White Powder Hy-Chock Oil Liquid Hydrocyanic Acid (up to 98%) Water White Liquid Hydrafluid 760 (Texaco and Houghton) Liquid Hydrafluid AZR&O, A, B, AA, C Liquid Hydrasol A (Textile Dying) Hydraulic Fluid (Phosphate Ester Base) Liquid Hydraulic Fluid (Polyalphaolifin) Liquid Hydraulic Fluid (Std. Petroleum Oils) Liquid Hydraulic Fluid (Water Glycol Base) Liquid Hydraulic Fluid HF-18, HF-20 Liquid Hydraulic Fluid HF-31 Liquid Hydrazine Colorless Fuming Liquid Hydrazine Hydrate Colorless Fuming Liquid Hydrazine Solution Liquid Hydro-Drive Oil (Houghton) Liquid Hydrobromic Acid (62% and less) Colorless to Yellow Liquid Hydrobromic Acid (to 48%) Colorless to Yellow Liquid Hydrochloric Acid (15%) Colorless to Yellow Liquid Hydrochloric Acid (37%) Colorless to Yellow Liquid Hydrochloric Acid, anhydrous Colorless Fuming Gas Hydrocyanic Acid (10% Solution with water) Water White Liquid

Stainless Steel 316

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

X 2 1 X 1 1 1 1 1 2 X X X 2 X X X X X

1 1 1 1 1 1 1 1 1 1 1 X 1 X 1 1 1 1 1 1 1 1 1 X X X X

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X 1

1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 X X X X X 1

1 1 1 2 1 2 1 1 1 1 1 X X 1 1 1 1 1 1 X X X X

EPDM

Food & Bev. Mstr. S

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

156

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 2 1 1

1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1

1 2 1 1 1 1 1 1

1 1 1 1 -

1 - 1 2 2 2 2 1 1 1 2 X X X 2 2 1 1 1 1 2 X X X 2 2 1 2 1 1 - X X X 2 X 1 2 1 1 X X X X X 1 2 2 X X X X X X 2 2 1 2 2 X X X X X 1 1 X CONTACT DENVER PRODUCT APPLICATION - 1 X X X - X 1 1 - 1 - 2 X - 2 1 1 - 1 X X X 2 X X 1 2 X X 1 X 1 1 1 X 1 2 X X 1 X 1 1 1 X 2 X X X 2 1 1 1 - 2 X X X 2 1 1 NO HOSE AVAILABLE - 1 X X - 2 X X - 1 1 - 2 2 1 - X 2 - X - X - X X X X 2 X - X X - X X 1 - 1 1 2 1 X 1 - 1 1 X 1 - 1 1 1 1 X 1 - 1 - 2 X X X X 2 X X 1 2 X X X X X 1 2 -

1 1 1 -

X X 1 1 2 1 1 2 -

2 2 1 2 1 1 2 -

X X X X 2 -

X X 1 X X X 1 1 1 1 -

2 X 2 2 1 1 2 -

X X 2 1 1 2 -

X 1 1 1 1 1 1 1 1

Polypro

1 1 1 1

™

1 2 2 -

Sanitron

1 1 1 1 1 1 1 1 1 1

™

1 1 X X X 1

1 1 1 1 1 1 1

Brass

Liquid Liquid Liquid Grayish Black Granules Liquid Liquid Black Liquid Brown precipitate Black to Brick Red Solid Slurry Liquid Liquid

1 1 1 1 1 1 1 1

Aluminum

Water White Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid In Water Gas Liquid Liquid Colorless Gas Colorless Fuming Gas Liquid Colorless Gas or Liquid Liquid Liquid Liquid Liquid Colorless Gas Liquid @ 410 PSI, 120°F (49°C) Liquid Liquid White Crystals Liquid Colorless Crystals Liquid Liquid Liquid Clear Liquid Clear Liquid Liquid Yellow Liquid Greenish-Yellow Aqueous Sol.

UHMWPE

Ink (Printers) Ink Oil Insulating Oil (Transformer)¹ Iodine Iodine Solution Iodine, In Alcohol Iron Acetate Liquor (Black Liquor) Iron Hydroxide Iron Ore (Hematite) Iron Oxide (Black, Brown, Red or Yellow) Iron Oxide Slurry Iron Salts Iron Sulfate Solution (Ferric Sulfate) Iron Sulfide Solution (Ferrous Sulfide) 1 Petroleum hose only.

Water White Liquid below 77°F/25°C

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated

Stainless Steel 316

Stainless Steel 304

1 2 2 -

X X X X X X 1 X X X X -

X X X X X X 1 2 2 2 2 1 1 -

X X X X X X 1 1 1 1 1 1 1 -

X X X X X 1 1 1 1 -

X X X X X 1 X X X X -

X 2 1 1 2 -

The world’s most trusted name in belts, hose and hydraulics.

1 2 1 -

X 1 1 1 1 -

2 1 1 X 1 X -

2 1 1 X 1 1 -

1 1 1 X 1 1 -

X -

2 1 1 X -

1 1 -

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

NBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Hydrocyanic Acid (98% or less) Hydrocyanic Acid (up to 20%) Hydrofluoric Acid (38% or less) Hydrofluoric Acid (47% or less) Hydrofluoric Acid (53 % or less) Hydrofluoric Acid (70%) Hydrofluoric Acid (Concentrated) Hydrofluosilicic Acid Hydrogen (Gas) Hydrogen Bromide Liquified (Anhydrous) Hydrogen Bromide Solution (HydroBromic Acid) Hydrogen Bromide, Anhydride Hydrogen Chloride Hydrogen Dioxide (Hydrogen Peroxide) Hydrogen Fluoride Hydrogen Peroxide (35% or less) Hydrogen Peroxide (50% or less) Hydrogen Peroxide (70% or less) Hydrogen Peroxide (90% or less) Hydrogen Sulfide Hydrogen Sulfide, Liquified Hydrolube (Water Glycol) Hydrolubric Oil (Houghton) Hydroquinone Hydroquinone Solution Hydroxyacetic Acid Hydroxyacetic Acid Solution Hydroxyethyl Acrylate (HEA) Hydroxyethyl Acrylate Acid (HEA Acid) Hydroxyethyl Methacrylate Hydroxyethyl Methacrylate Solution in Xylene Hydroxypropyl Acrylate Acid (HPA Acid) Hylene (Toluene Diisocyanate) Hypochlorous Acid (only in dilute solutions)

Couplings / Adapters

Gates Hose / Polymers

EPDM

Industrial Hose

Iron/Carbon Steel

X X X X X X

X 2 X X X X X X

1 2 X X

1 2 2 X

1 -

1 1 -

157

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Industrial Hose Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

158

Neoprene

Butyl

Fluorocarbon

2 2 X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 2 2 1 1 1 2 1 2 1 1 2 1 1 2 -

1 1 1 1 1 1 1 -

1 1 X X 1 1 1 1 X 2 X -

1 1 1 1 1 1

1 1 1 1

1 1

1 -

2 2 X 2 X 2 X -

1 1 1 1 1 1 1 1 1

1 1 2 1 1 1 1 1

2 2 1 2 1 2 1 1

1 1 -

1 1 1 1 1

X X X X X

2 2 2

1 1 1

2 2 2

1 1 1

1 1

1 2

1 1

Hypalon

CPE

Nylon

PVC

™

2 -

™

1 1 1 1 1 1 1

EPDM

Kaolin Clay White to Yellowish Powder Karo Syrup Yellow Liquid Kerosene Water White Oily Liquid 2 Aircraft fueling hose only for fueling operations.

Sanitron

Liquid Liquid Liquid Liquid Liquid Liquid

UHMWPE

Jet Fuel A and A1² Jet Fuel JP1² Jet Fuel JP10 (Tetrahydroxydicyclopentadiene)² Jet Fuel JP4² Jet Fuel JP5² Jet Fuel JP8²

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Colorless Liquid Colorless Liquid Water White Liquid Colorless to Yellow Liquid Colorless Liquid Colorless Liquid Colorless Gas Liquid @ 98 PSIG, 120°F (49°C) Colorless Liquid Gas Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Gas Liquid @ 88 PSIG, 120°F (49°C) Colorless Liquid Water White to Yellow Liquid Colorless Liquid Viscous Liquid Clear Liquid Water White Liquid Colorless Liquid Water White Liquid Liquid above 106°F (41°C) Colorless Liquid Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid

Polypro

Brass

Aluminum

Stainless Steel 316

Stainless Steel 304

Iron/Carbon Steel

NOTE: Ratings are for the effect on the polymer only!

SBR

NBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Isoamyl Acetate Isoamyl Alcohol (Isobutyl Carbinol) Isoamyl Bromide Isoamyl Butyrate Isoamyl Chloride Isoamyl Ether Isoamyl Phthalate Isobutane Isobutane Liquid Isobutanol (Isobutyl Alcohol) Isobutene (Isobutylene) Isobutyl Acetate Isobutyl Alcohol (Isobutanol) Isobutyl Aldehyde (Isobutyraldehyde) Isobutyl Carbinol (Primary Isoamyl Alcohol) Isobutylamine Isobutylene (Isobutene) Isobutylene Liquid (Isobutene Liquid) Isobutyraldehyde (Isobutyl Aldehyde) Isocyanate (Toluene Diisocyanate) Isooctane Isooctyl Adipate Isooctyl Alcohol Isooctyl Thioglycolate Isopentane Isophorone Isophthaloyl Chloride Isopropanol (Isopropyl Alcohol) Isopropanolamine (MIPA) Isopropyl Acetate Isopropyl Alcohol (Isopropanol) Isopropyl Benzene (Cumene) Isopropyl Chloride Isopropyl Ether Isopropylamine Isopropylbenzene (Cumene) Isopropyltoluene (Cymene)

Couplings / Adapters

Gates Hose / Polymers

X 2 2 X 1 X X

X 2 X X X X

1 X X 1 2 2 X 2 X X 1 2 1 2 1 X -

X - X X X 2 - 2 2 2 X - X X X X - X - X X - X - X X - X 2 USE LPG HOSE ONLY 2 2 2 2 2 1 X X X - X X X 2 2 2 2 2 X - X X X 2 - 2 2 2 X - X 2 1 X X X - X X X X X X X X 1 X X 1 X 1 2 2 2 1 2 - 2 1 X X X X 2 1 2 2 2 1 X X X X 2 -

1 1 2 X 1 X 2 X 2 1 X 1 1 1 1 1 1 1 1 X 1 1 1 X 1 1

1 X X 1 X 2 X X X 1 2 X X 2 X -

1 1 2 1 1 2 2 -

1 1 1 1 1 1 1 1

X X X X X

1 1 X 1 1 1

X X X X X

2 X 2 X X

X X X X X

1 1 1 1 1 1

X X X X X

1 X

The Gates Rubber Company

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Industrial Hose Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

NBR

SBR

Neoprene

Butyl

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

2 2 -

1 X -

X -

X 1

1 X -

2 -

X -

1 1 -

X -

1 -

1 1 -

1 -

1 1 1 1 1 Colorless to Yellow Syrupy Liquid 1 Liquid above 108°F (42°C) 1 Colorless to Yellow Liquid 1 Colorless Crystals 1 Liquid 1 White Powder Liquid above 75°F (24°C) 1 White Crystals Solution 1 White Crystals 1 Solution 1 Solution 1 White Powder White to Blue Powder Colorless Oily Liquid 1 Colorless Liquid 1 Light Brown Viscous Liquid-Solid 1 Clear Liquid 1 White to Gray Lumpy Solid Solution 1 Solution 1 White Powder Powder White Crystalline Powder Powder or Lumps Colorless Liquid 1 1 Colorless to Straw Colored Liquid 1 Yellow Amber to Brown Liquid 1 Liquid 1 White Crystals Solution X Liquid 1 Liquid 1 Liquid 1

1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 1 2 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 X 1 X X -

1 1 1 1 1 X 1 1 1 1 1 X 2 -

2 2 2 2 X 1 1 1 X X X 2 2 X X 2 2 X X

X X 1 2 1 1 2 1 2 2 X 1 X 2 X 2 2 2 2 1

X 2 X X 2 2 2 X X X X 2 X X 2 X X

X 2 X X 1 2 1 1 2 1 2 1 1 X X X 1 X 2 1 1 1 1 X X 2 1 X X

X 1 1 2 2 2 2 X X 2 X 1 X X 2 2 2

X X X 2 2 2 X X X X 2 X 2 X X

X 1 1 1 1 1 X 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

X 1 1 1 X 2 X X X 2 X 1 2

1 1 1 1 1

1 X 1 1 2 1 1 1 1 1 1

X X 1 1 1 1 1 X 2 2 1 1 2 X 2

X X X X X X 1 1 1 1 2 2 1 1 1 2 2 X 1 2 1 1 1 1

X X 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 1

1 1 X X X X 1 1 1 X 1 1 1 1 1 1

1 1 2 2 2 2 1 X X 1 1 1 X 1 2 1 1 1 1

Liquid

Solution Solution Colorless-Yellow Liquid Colorless to Yellow Liquid Colorless to Yellow Liquid

EPDM

1 1 1 -

™

1 1 -

™

1 1 -

Sanitron

UHMWPE

Gatron

Machine Oil Under 135°F (57°C)

1 1 -

Form (at room temperature Chemical unless otherwise stated Ketchup Red Liquid Ketoglutaric Acid In Water or Alcohol Ketones (ie Acetone, MEK, Cyclohexanone ) Generally Liquids Koch Acid White Solid

Teflon

NOTE: Ratings are for the effect on the polymer only!

Lacquer - Alcohol or Acetate as Solvent Lacquer - Toluene or Xylene as Solvent Lactic Acid (90% or less) Lactic Acid, Food Grade - 50-80% Lactic Acid, Plastic Grade - 50-80% or less Lactic Acid, USP 85-90% or less Lactol Lard (Fat of the Hog) Lard Oil Lasso (Alachlor) Latex Paint Lauryl Peroxide Lauryl Alcohol Lead Acetate Lead Acetate Solution Lead Arsenate Lead Arsenate Solution (In Nitric Acid) Lead Nitrate Solution (In Water or Alcohol) Lead Silicate (basic) Lead Sulphate (Basic, Blue Basic, Tribasic) Lead, Tetraethyl (Tetraethyl Lead) Lead, Tetramethyl (Tetramethyl Lead) Lecithin Ligroin Lime (Calcium Oxide) Lime Sulfur Solution Lime, Chlorinated (Bleaching Solution) Lime, Chlorinated (normal 35-37% Chlorine) Lime, Hydraulic (Calcined Limestone) Lime, Slaked (Calcium Hydroxide) Limestone Limonene Lindane (Ag Spray) Linoleic Acid Linseed Oil Liquid Soap Lithium Chloride Lithium Chloride (35-40% Brine) Lubricating Oil Diester Under 135°F (57°C) Lubricating Oil (SAE 10, 20, 30, 40, & 50) Lubricating Oil Under 120°F (49°C)

Couplings / Adapters

Gates Hose / Polymers

The world’s most trusted name in belts, hose and hydraulics.

159

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

1 1 1 1 1 1 -

1 X 1 1 1 -

1 1 1 1 -

1 2 1 1 -

1 1 1 1 1 1 1 1 1

1 1 1 2 1 1 1 1

1 1 1 1

2 1 1 -

2 2 2 2 2 2 -

1 1 1 1 1 1

1 1 1

X 1

2 X X 1

The Gates Rubber Company

1 1 1 1 1 1 1 1 1 -

1 1 -

1 1 1

1 1 1 -

7 1 1 1 1 1 -

1 1 -

1 -

X 1 1 -

X X X 1 -

X X X 1 1 1

2 1 2 1 1

1 -

1 X 2 X 2 1

X 1 1 2 1 X

X 2 2 1

2 1 1

1 1

X X 2

Polypro

1 1 1 1 1 1 1 1 -

- 1 - 1 - 1 1 1 1 1 - 1 - 1 1 - 1 - 1 - 1 - 1 1 - 1 2 - 2 1 1 1 1 2 1 - X X 1 1 NO HOSE AVAILABLE 2 2 2 X - 1 - 1 1 X X - 1 1 2 2 - 1 - 1 USE LPG HOSE ONLY 1 - 2 X X X X 2 2 2 2 2 1 X X X X 2 - 1 2 2 1 1 2 - 1 2 2 2 1 2 2 2 2 1 2 NO HOSE AVAILABLE X X X X 2 X X X X X 1 X X - X 1 - 2 2 1 1 1 1 1 1

Brass

Fluorocarbon

EPDM 1 1 1 1 1 1 2 2

Aluminum

Butyl

Sanitron 1 1 1 1 1 1 -

Stainless Steel 316

Neoprene

UHMWPE 1 1 1 1 1 1 1 1 1 -

™

Gatron 1 1 1 1 1 1 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Magnesite White to Brown Crystalline Solid Magnesium Powder Magnesium Acetate Colorless Crystalline Aggregate Magnesium Acetate Solution In Water or Alcohol Magnesium Carbonate White Powder Magnesium Carbonate Solution (in Acid) Liquid Solution Magnesium Chloride Colorless to White Crystals Magnesium Chloride Brine Solution Magnesium Chloride, Hydrated (in H2O or Alcohol) Solution Magnesium Hydroxide White Powder Magnesium Hydroxide Solution (in Dilute Acid) Liquid Solution Magnesium Nitrate White Crystals Magnesium Nitrate Solution (in H2O or Alcohol) Liquid Solution Magnesium Oxide, Dry White Powder Magnesium Oxide, Slurry Magnesium Sulfate Solution Liquid Solution Malathion (Ag Spray Dilute) Clear to Amber Liquid Malathion (Ag Spray) Clear to Amber Liquid Maleic Acid Liquid Maleic Acid Solution Solution Maleic Anhydride Colorless Needles Maleic Anhydride (Heated Liquid) Liquid above 124°F (53°C) Malic Acid (dl form) Colorless Crystals Malic Acid Solution (in H2O or Alcohol) Solution Malt Extract (Maltine) Light Brown Viscous Liquid Malt, Dry Yellow to Amber Grain Maltine (Malt Extract) Light Brown Viscous Liquid Manganese Salts Manganese Sulfate (Manganous Sulfate) Pale Red Solid Manganese Sulfate Solution Solution in Water Manganese Sulfide (Manganous Sulfide) Green Crystals Manganese Sulfite (Manganous Sulfite) Black to Brownish Red Powder MAPP Gas (Methylacetylene Propadiene) Liquid Maxmul (Penzoil Hydraulic Fluid) Liquid Mayonnaise Semi-Liquid MBK (Methyl Butyl Ketone) Colorless Liquid MEA (Ethanolamine) Colorless Viscous Liquid MEK (Ethyl Methyl Ketone) Colorless Liquid Mercuric Chloride White Powder Mercuric Chloride Solution (in H2O, or Alcohol) Solution Mercuric Cyanide Colorless Transparent Prisms Mercuric Cyanide Solution (in H2O or Alcohol) Solution Mercurous Nitrate Solution Solution Mercury Silver Liquid Mercury Vapor Gas Mesityl Oxide (Methyl Isobutenyl Ketone) Colorless Oily Liquid Mesitylene (Trimethylbenzene) Liquid Metallic Soaps (Aluminium, Calcium, Zinc) Solids @ Room Temperature Methallyl Alcohol (Methylallyl Alcohol) Colorless Liquid Methane Gas Methanol (Methyl Alcohol) Colorless Liquid

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

160

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

1 1 X 1 1 1 1 2 1 1 2 2 1 1 1 X X 1 1 1 1 1 1

1 1 2 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

X X X X X 1 1 X X X X X X 1 1 1

2 1 1 1 1 1 1 1 X X X 1 1 2

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Fluorocarbon

2 1 1 X 1 1 1 X X 1 X 1 2 1 1 -

2 2 1 2 2 1 X X 1 2 1 1 X X X 2 X 2 2 2 2 2 X 1 2 2 X 2 2 -

X X X X 2 1 X 1 X X X X X 1 X X 1 X X X X X X X X X X X 2 X 2 1 X -

X X X 1 X X X X X X X X 2 X X X X X X X X X X X -

1 X X X X X 1 X X X X X X X X 2 X X X 1 X X X X X X X X X X X X X 2 -

X X X 1 X X X X X X X 2 X X X X X X X 2 X -

2 2 2 X 1 1 X X 1 2 X X X X X X X 2 2 1 2 2 2 2 2 2 X X 2 1 X 2 2 2 1 2 -

X X X X 1 X 1 1 1 X 1 1 1 1 1 X 1 X X 2 X X X X X X X X 1 1 X X 1 1 2 1 1

™

Polypro

Butyl

™

1 1 1 1 2 1 1 1 1 -

Brass

Neoprene

Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Oily Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Liquid above 95°F (35°C) Colorless Liquid Colorless Liquid Water White Liquid Yellow to Red Liquid Liquid above 99°F (38°C) Colorless Liquid Colorless Liquid Colorless Liquid Water White Liquid Liquid @ 107 PSIG @ 20°C White Crystalline Solid Colorless Liquid Colorless Liquid Colorless to Straw Colored Liquid Colorless Liquid Liquid @ 120 PSIG @ 49°C Colorless Liquid Colorless Liquid

1 2 2 1 1 1 1 1 1 1 1 1 2 2 1 2 1 1 2 2 2 2 1 1 1 1 2 1 1 1 1 1

Aluminum

Liquid @ 160 PSIG @ 120°F (49°C)

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Stainless Steel 316

SBR

Methyl Chloride Methyl Chloroform (1,1,1 Trichloroethane) Methyl Chloroformate Methyl Cyanide (Acetonitrile) Methyl Cyclohexane Methyl Ethyl Ketone (MEK) Methyl Formate Methyl Hexanol Methyl Hexanone (Methyl Isoamyl Ketone) Methyl Hexyl Ketone Methyl Isoamyl Ketone (Methyl Hexanone) Methyl Isobutenyl Ketone (Mesityl Oxide) Methyl Isobutyl Ketone (MIBK) Methyl Isopropyl Ketone Methyl Methacrylate Methyl Methacrylate Monomer, Inhibited Methyl Phenol (Cresol) Methyl Propyl Carbinol (2 Pentanol) Methyl Propyl Ether Methyl Propyl Ketone (Pentanone) Methyl Salicylate Methyl Stearate Methyl Sulfate (Dimethyl Sulfate) Methyl-2-Pyrrolidone Methyl-n-Amyl Carbinol Methyl-n-Amylketone Methylacetylene Propadiene (MAPP Gas) Methylacrylic Acid (Crotonic Acid) Methylal Methylallyl Alcohol (Methallyl Alcohol) Methylallyl Chloride Methylamine (30-40% in H2O) Methylamine (Anhydrous) Methylamyl Acetate Methylamyl Alcohol

UHMWPE

Methyl Cellosolve (Diethylene Glycol Methyl Ether)

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated White Crystalline Powder Solution Liquid Colorless Liquid Colorless Liquid Water White Liquid Colorless Liquid White Solid Colorless Liquid Liquid @ 55 PSIG @ 120°F (49°C) Colorless to Straw Colored Liquid Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid

Stainless Steel 304

Iron/Carbon Steel

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

X X X X 1 X X X X X X X X X X X 1 X X X X X X 2 X X 2 X X 2 -

1 1 1 1 2 1 1 X X 1 2 2 2 2 2 2 1 1 1 1 1 -

1 1 1 X 1 1 1 X 1 1 1 1 X X 1 X -

X X 1 2 X X 1 X X X 1 X X X X 1 X X 1 1 X X -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 -

1 1 2 1 1 1 1 1 1 1 1 -

2 -

NBR

Food & Bev. Mstr. P

EPDM

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Methionine Methoxychlor Solution (in Alcohol) Methyamine (Monomethylamine) Methyl Acetate Methyl Acetoacetate Methyl Acetone Methyl Acrylate (Inhibited) Methyl Acrylate Acid(Methylacrylic Acid) Methyl Alcohol (100%) (Methanol) Methyl Bromide Methyl Bromoacetate Methyl Butanathiol (Butyl Mercaptan) Methyl Butanol (2-Methyl-1-Butanol) Methyl Butyl Ketone (MBK) Methyl Carbitol (Diethylene Glycol Methyl Ether)

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

The world’s most trusted name in belts, hose and hydraulics.

161

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

Sanitron

EPDM

1 2 2 -

1 1 X X X -

2 X X X -

White Powder Liquid Solution White Powder Colorless Liquid Powder Liquid Liquid Liquid Colorless Liquid Colorless to Yellow Liquid Liquid

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 2 1 -

1 X X 1 1 1 1 -

X X 1 1 X 1 1 1 1 X 1 2 1 2

Colorless Liquid Colorless Liquid Colorless Liquid Liquid White Crystalline Flakes Commercial Grade is Dark Fluid Colorless Liquid Liquid Green Crystals Solution Green to Brown Crystals/Powder Brown Deliquescent Scales Solution Green Deliquescent Crystals

1 1 1 1 1 1 1 1 -

1 2 2 1 1 1 1 1 -

1 1 1 -

X X 2 1 -

162

1 2 X 2 X 1 2 X -

1 1 1 1 1 1 2 X 1 1 1 1 1 1 X X

1 1 1 1 1 1 1 X 1 1 1 1 1 1 1 1 X 1

1 X X 2 2 1 2 X 1 1 X -

1 1 1 1 1 1 X 2 1 1 1 X 1 1 X -

1 -

X X 1 1 -

2 1 1 1 1 X X -

1 1 1 1 1 2 2 -

1 1 1 1 1 2 2 2

1 1 1 X X X

1 1 1 1 1 X X -

Nylon

PVC

n-Hexaldehyde N-Methyl-2-Pyrrolidone n-Octane Naphtha (Low Aromatic Content) Naphthalene Naphthenic Acid Neohexane Neutral Oil Nickel Acetate Nickel Acetate Solution (In Water or Alcohol) Nickel Carbonate Nickel Chloride Nickel Chloride Solution (In Water or Alcohol) Nickel Nitrate

Liquid @ 120 PSIG @ 120°F (49°C)

CPE

Monochlorobenzene Monoethanolamine Monoethylamine Monoethylamine Solution (70% or less) Monoglycerides Monomethylamine (Methyamine) Monopentaerythritol (Pentaerythritol) Monopentaerythritol Solution Monosodium Phosphate (Monobasic) Morpholine Mortar, Inorganic Motor Oil Mould Oil Mouth Wash MTBE (Methyl Tertiary Butyl Ether) Muriatic Acid (Hydrochloric) Mustard

Hypalon

Monochloroacetic Acid Solution (in H2O or Alcohol)

™

UHMWPE

1 1 1 1 1 1 2

™

Gatron

Chemical

Teflon 1 1 1 1 1 1 1 1

Form (at room temperature unless otherwise stated Colorless to Brown Liquid Colorless Liquid Clear Liquid Colorless Liquid Colorless Liquid Colorless Liquid Liquid above 37°C Colorless Liquid Colorless Liquid White Liquid Colorless Liquid Colorless Liquid Liquid Liquid Brown Liquid Colorless to Light Brown Crystals Liquid Solution Clear Liquid Colorless Liquid Liquid @ 15 PSIG @ 120°F (49°C) Liquid Solution Liquid to Solid

Polypro

Brass

Aluminum

Stainless Steel 316

Stainless Steel 304

Iron/Carbon Steel

NOTE: Ratings are for the effect on the polymer only!

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Methylaniline Methyldiethanolamine Methylene Bromide Methylene Chloride (Dichloromethane) Methylene Dichloride Methylene Dichloride (Methylene Chloride) Methylene Diphenyl Diisocyanate, MDI Methylstyrene MIBK (Methyl Isobutyl Ketone) Milk Mineral Oil Mineral Spirits (VM&P Naphtha) MIPA (Isopropanolamine) Mobile Therm 603 Molasses Monochloroacetic Acid

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

1 1 2 1 1 1 X

2 X X X X

X X X 2

X X X X 1

X X X X X X

X X 1 2 X 2 1 1 2 X X -

X - X 2 X X X X X X X X X X X X X X X X X X X 2 USE FDA HOSE ONLY 1 X X 1 X 1 X X - X 2 - 2 1 1 2 2 2 2 1 - X X X X X X 2 2 2 2 2 X X X X 2 - 1 - 2 2 X 2 - 1 1 X X 2 X X 2 2 X 2 - 1 1 1 1

1 1 X 1 1 1 X X 1 1 X 1 -

1 X X 1 X X X 2 2 1

1 X 1 1 1 1 1 -

1 1 X X 1 1 1 X -

2 X X X X 2 2 -

X 1 2 2 1 2 2 -

1 1 1 1 1 1 -

X X 2 -

1 1 1 -

X X X X 2 2 -

The Gates Rubber Company

X X X 1 X 1 2 1 1 2 1

2 X 2 2 2 -

1 X X X 1 2 -

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

EPDM

1 1 1 1 1 X X X X X X -

1 2 1 2 2 2 2 X X X X 1 -

2 1 2 1 2 2 1 2 2 X X X X X X 2 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 -

1 1 1 -

1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 2 2

1 1 2 -

1 1 X 2

1 X X 1 X -

1 X X X X X X X X X X 1 1 1 1 X 1 -

1 2 2 X 1 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 -

2 1 1 1 2 1 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 -

X X X X 1 1 1 X X -

X X X X X X X X X X X X 1 1 1 1 X 1 1 X -

1 2 2 2 1 2

X 1 1 1

2 1 1 1

1 1 1 1

X 1 1 1

X 2 2 1

Hypalon

CPE

Nylon

PVC

™

1 1 1 1 1 1 1 1 1 1 1 2 2 X X X X 2 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Sanitron

Colorless Waxy Solid Colorless Oily Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid Colorless Liquid White Flakes Water White Liquid Liquid Liquid Solid to Liquids

UHMWPE

Octadecanoic Acid (Stearic Acid) Octanoic Acid (Caprylic Acid) Octanol (Octyl Alcohol) Octene Octyl Acetate Octyl Alcohol (Octanol) Octyl Aldehyde Octyl Carbinol (Nonyl Alcohol) Octyl Phenol (Diisobutyl Phenol) Octylamine Oil (SAE Motor Oils) Oil of Turpentine Oils, Animal (High Fatty Acid Content)

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Solution Liquid Yellow Green to Blue Crystals Solution Colorless Oil Colorless Crystals to White Lumps Solution Colorless Liquid Transparent or Yellowish Liquid Transparent or Yellowish Liquid Colorless Liquid Colorless to Yellow Liquid Colorless to Yellow Liquid Transparent or Yellowish Liquid Colorless to Yellow Liquid Yellow Liquid Red Liquid Yellow Liquid @ 43°F (6°C) Colorless Liquid Liquid Colorless Gas Liquid @ 50 PSIG @ 120°F (49°C) Solutions in Water Gas Liquid @ 50 PSIG @ 120°F (49°C) Colorless Liquid Colorless Liquid Yellow-Red Liquid or Gas Light Blue Liquid Gas Liquid @ 800 PSIG @ 68°F (20°C) Colorless Liquid Colorless Liquid Colorless Liquid

Polypro

Brass

Aluminum

Stainless Steel 316

Stainless Steel 304

NOTE: Ratings are for the effect on the polymer only!

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Nickel Nitrate Solution (In Water or Alcohol) Nickel Plating Solution Nickel Salts Nickel Sulfate Nickel Sulfate Solution Nicotine Salts (ie Nicotine Hydrochloride) Niter Cake (Sodium Bisulfate) Niter Cake Solution Nitric Acid (25% or less) Nitric Acid (10%) Nitric Acid (25%) Nitric Acid (35% or less, 26 Degrees Baume) Nitric Acid (52% or less, 36 Degrees Baume) Nitric Acid (61% or less, 40 Degrees Baume) Nitric Acid (63.5% or less) Nitric Acid (67% or less, 42 Degrees Baume) Nitric Acid (95% or less, 48.5 Degrees Baume) Nitric Acid (Red Fuming) Nitrobenzene Nitroethane Nitrogen (Cryogenic Liquid) Nitrogen (Gas) Nitrogen Dioxide (Nitrogen Tetroxide) Nitrogen Fertilizer (Ammonia, Urea) Nitrogen Oxide (Nitrous Oxide) Nitrogen Tetroxide (Nitrogen Dioxide) Nitromethane Nitropropane Nitrosyl Chloride Nitrous Acid (Up to 10%) Nitrous Oxide (Nitrogen Oxide) Nitrous Oxide, Compressed Liquid Nonene (1-nonylene) Nonyl Alcohol (Octyl Carbinol) Nonylene (Nonene)

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

Iron/Carbon Steel

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 -

2 2 1 2 1 1 2 2 2 1 2 2 X X X X X 2

1 1 1 1 1 1 1 X X X X X X X X 1

1 1 X X X X X X X X X X 2 -

2 X 2 1 1 1 X X X X X X X X X X X -

1 2 2 2 2 -

2 2 2 2 2 2 2 2 1 1 1 1 1 - 1 2 2 2 2 2 1 1 1 1 1 - X X 2 X X X X 2 X X X X 2 X X X X 2 X X X X 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 2 2 X 2 NO HOSE AVAILABLE 1 1 1 1 1 X X X X 1 X - 2 X 2 X X X X 2 - 1 X X X X 1 1 -

1 1 1 1 X X 1 1 1 1

1 1 X 1 1 -

1 1 1 -

1 X 1 1 1 X -

2 X X X

2 2 X 2 X 1 X 1 1 1

1 1 1 X 1 X 1 X 1 1 1

2 1 X X 2 X X

1 1 1 1 1 1

1 1 1 1 1 -

2 2 2 X X X

2 2 X 2 X 1 X X X X

2 2 2 2 2 2

2 X X 2 X X 2

The world’s most trusted name in belts, hose and hydraulics.

163

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

EPDM

2 X 1 X 2 1 -

X X 2 X 2 X X 2 1

X X 2 X 2 X X X 2 1

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 2 1 1 1 1 1 1 X 1 2 2 2 1 X 1 1 2 2 2 -

1 1 1 1 1 1 X 1 2 1 X 1 1 2 2 -

1 X X 2 X 2 X X 1 2 2 X X X X X X 2 2 -

2 2 X 1

2 1 1 2 1

1 1 1 1 1 1

1 1 2 1

2 2 1 X 1

2 1 1 X 1 1 1

1 1 2 X X 2 X X X X 1 2 X X -

1 1 2 1 1 1 2 X X -

1 1 2 1 1 1 1 2 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 -

1 1 1 1 1 1 2 _ -

1 1 X 1 1 1 X 1 X X -

1 1 1 -

Hypalon

CPE

Nylon

PVC

™

Sanitron

2 1 2 X 1 2 X 2 1

™

1 1 1 1 1 1 1 1 1 1 1

UHMWPE

Liquid Liquid Liquid or Paste Liquid or Paste Yellow to Brown Solid Crystals in Hot Alcohols Papermakers Alum (Aluminum Ammonium Sulfate) In Water Paraffin (Aliphatic Hydrocarbon) Varies from Gas to Waxy Solid Paraformaldehyde White Solid - Flakes or Powder Paraldehyde Colorless Liquid Paranox (Detergent, Disperser; Exxon) Parapol (Liquid Polyisobutylene; Exxon) Liquid Peanut Oil Yellow to Green Liquid Pelargonic Acid Colorless to Yellow Oil Pentachloroethane Colorless Liquid Pentachlorophenol In Oil In Oil (Wood Preservative) Pentaerythritol (Monopentaerythritol) White Powder Pentane Colorless Liquid Pentanol (Methyl Propyl Carbinol) Colorless Liquid Pentanone (Methyl Propyl Ketone) Water White Liquid Pentasol (Amyl alcohols, primary and secondary) Liquid Perchloric Acid (70%) 70% or Less with H2O Perchloroethylene Colorless Liquid Petroleum Coke Solid Pellets Petroleum Distillate Liquid Petroleum Ether (Naptha) Liquid Petroleum Naphtha (Toluene/cyclohexane/Xylene) Liquid Petroleum Naphtha Flash Point Over 200 Degrees Liquid Petroleum Oils (Refined) Liquid Petroleum Oils (Sour) Liquid Petroleum Paraffin Wax Solid with low Melt Points Phenol (Carbolic Acid) White or Pink Crystals Phenol Acid 95% or less with H2O Phenolates Phenolsulfonic Acid Yellow to Brown Liquid

Gatron

Paint (Emulsion or Latex) Paint (Inorganic) Paint (Oil or Solvent Based) Paint Remover Paint Resin Palm Oil Palmitic Acid (Hexadecanoic Acid)

Teflon

Form (at room temperature Chemical unless otherwise stated Oils, Mineral (Aliphatic or Aromatic) Liquids Oils, Vegetable (Soybean, Coconut, Corn) Liquids Oleic Acid (fatty acid) Yellow to Red Oily Liquid Oleum (Fuming Sulfuric, 30% SO3 or less) Clear to Off White Fuming Liquid Olive Oil Yellow to Green Liquid Ortho-Dichlorobenzene (also meta and para) Colorless Liquid Ortho-xylene (1,2 Dimethylbenzene) Clear Colorless Liquid OS 45 Hydraulic Fluid (Silicate Ester Base) Liquid Oxalic Acid Transparent Crystals Oxalic Acid (50%) Crystals in H2O Oxygen Colorless Gas Oxygen, Refrigerated Liquid Liquid @ 200 PSIG @ -146°C Ozone Gas

Polypro

Brass

Aluminum

Stainless Steel 316

Stainless Steel 304

Iron/Carbon Steel

NOTE: Ratings are for the effect on the polymer only!

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

164

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

1 1 2 1 1 1 1 1 1 1

2 X X X X X X 2 2 1

2 2 X 2 X X 1 1

1 1 X 1 1 X X -

X 2 X 2 X X X -

2 X X X X 1 X X - X 2 X X 2 2 X X X X X 2 X X X 2 X X X X X X X X X X 2 X X 1 X - 1 X X X X 2 2 2 2 1 NO HOSE AVAILABLE X X X 2 2

2 X X 2 X X X 1 2 2 X X X X X X 2 2 -

2 2 X 1 2 1 2 1 X X 2 X 2 X 1 1 X X X -

1 1 1 1 1 1 1 1 1 1 X 1 1 1 1 1 1 1 1 1 1 1 1 2 1

X X 2 X X X 2 2 X X X 2 X X X X -

1 1 1 1 1 2 1 X 1 1 -

1 1 X 1 X 2 X 1 X X 2 -

X X X X X X 2 2 X X X X X X X -

The Gates Rubber Company

X X X X X 1 X 1 X 2 2 X 1 X X X X X X -

X 2 2 2 2 2 X X 2 2 X X X 2 2 X X X -

X X 2 2 X X 1 1 2 2 2 X X X X X 2 2 -

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

EPDM

NBR

SBR

Neoprene

Butyl

Fluorocarbon

X X 1 2 1 1 2 2 2 2 2 X X 1 1 1

X 2 X 1 2 1 1 2 2 2 1 2 2 X X X 2 1 1 1 2 1

X X X X 2 2 X 2 2 2 2 2 2 1 1

X X X X 2 2 X 2 X X X -

1 X 1 X X X 1 2 2 X 1 2 X X X 1 1 1 1 1 1

X X X X 2 2 X 2 X X 1 1 2

X 2 2 2 2 X 2 X X X 2 1 1 2 1

1 X 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 2 -

™

X 1 1 X 1 1 1 1 1 1 X 2 2 X 1 -

™

2 1 X 1 1 2 1 1 2 2 2 1 2 2 1 2 1 1 2 1 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Sanitron

Liquid Solid In Water Crystals Colorless Liquid Colorless Liquid Colorless Liquid Syrupy Liquid Syrupy Liquid Liquid Liquid Liquid Colorless Crystals Colorless Liquid White Crystalline Solid In Water Yellow Crystals Colorless to Amber Liquid Viscous Brown to Black Liquid Colorless Transparent Liquid In Water In Aromatic Hydrocarbons Liquid Liquid Colorless Liquid to glassy Solid Solid Beads Liquid Solid Beads Solid Beads Emulsion

UHMWPE

Gas, Liquid 60 PSI @ 120°F (49°C)

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Greenish Powder or Flakes Water White Liquid Clear Volatile Liquid Colorless to Red Solid Needles Yellow Liquid

X X X X 1 1 1 1 2 X X 1 1 1

X 1 1 1 1 2 2 -

X 2 2 X X X X 1 1 X 2 2 -

X X X X 1 1 X X X 2 -

1 1 X X X X X X 1 -

1 1 1 1 2 2 1 1 1 X -

Polypro

Stainless Steel 304

Iron/Carbon Steel

PVC

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Phenothiazine Phenyl Acetate Phenyl Chloride (Chlorobenzene) Phenylenediamine (ortho) Phorone (Diisopropylidene Acetone) Phosgene (Carbonyl Chloride) Phosphate Ester Hydraulic Fluid Phosphate Rock Phosphate, Trisodium Phosphoric Acid (100%) Phosphoric Acid (35% or less) Phosphoric Acid (50%) Phosphoric Acid (75%) Phosphoric Acid (85%) Phosphoric Acid (90%) Phosphoric Acid, Spent Photographic, Developers Photographic, Emulsions Photographic, Fixing Solutions Phthalic Acid Phthalic Acid (50%) Phthalic Anhydride, Molten Picric Acid (Solution) Picric Acid (Trinitrophenol) Pine Oil Pine Tar Pinene Piperazine Hydrochloride Solution (34%) Pitch Plating Solution Chrome Under 120°F (49°C) Pluronic (Block Polymer with Hydroxyl by BASF) Polyester Plastic Polyethylene Glycol Polyethylene Plastic Polypropylene Glycol Polypropylene Plastic Polystyrene Plastic Polyurethane Foam Under 125°F (52°C) Polyvinyl Acetate - Emulsions Potash (Potassium Carbonate) Aqueous Solution Potassium Acetate Potassium Bicarbonate Potassium Bisulfate Potassium Bromate Potassium Bromide Potassium Carbonate Potassium Carbonate, Liquid Potassium Chlorate Potassium Chloride Potassium Chloride, Dry Potassium Chromate

Couplings / Adapters

Gates Hose / Polymers

Brass

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Aluminum

Industrial Hose

Stainless Steel 316

1 1 1 1 2 2 1 1 1 X -

1 X X X X X X -

1 1 2 2 X X X X -

X 1 1 1 1 1 1 1 -

Liquid

White Powder Colorless crystal or white Powder Colorless crystal White Crystal or Powder White Crystals or Powder White granular Powder Colorless to Cloudy Liquid Colorless to white Powder Colorless to white Solid White Solid Yellow Crystal

1 1 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 2

1 1 -

2 1 1 1 1 1 1 2

2 1 1 1 1 1 1 X

2 1 1 1 1 1 1 2

X 1 1 1 1 1 1 1

2 1 1 1 1 1 1 2

1 1 1 1 1

1 1 1 1 2 1 1 2

1 1 1 1 1 1 1 1 1 1 1

2 2 -

1 1 1 -

X X -

1 1 1 1 1

The world’s most trusted name in belts, hose and hydraulics.

165

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

166

- 1 1 1 1 1 1 1 1 - 1 - 1 - 2 2 2 2 2 1 X 1 1 2 2 2 2 1 2 - 1 - 1 2 2 2 2 1 X 2 - 1 1 - 1 1 1 - 1 - 1 - 1 1 1 - 1 1 2 - 1 1 1 - 1 - 1 1 - 1 1 1 2 - 1 - 1 - 1 1 1 CONTACT DENVER PRODUCT APPLICATION - 1 1 - X 1 1 2 1 1 1 1 - 1 1 2 X 2 2 X 2 1 2 1 X - 2 1 1 1 1 - 1 - X - X 2 X X - X - X - X 2 X - X X X X X X 1 X - 2 - 2 2 - X - X X X X X X 2 X 1 1 1 1 1 1 1 1 1 1 1 - 2 X - X 2 2 - X 1 - X - 2 X 2 - 2 - X 2 1 - 2 - 2 X X X X 2 1 X 2 - 2 X X X X 2 2 X 2 2 X X X X X X 1 - 2 - 2 2 2 - 2 - X X X X X X 1 X 2 - 2 X X X X 2 1 X 2 - X X X X X X 1 X 2 - 2 X X X X 2 1 X 2 X X X X X X X 1 X 2 2 - X X X 2 - 2 X 2 - X 1 - X 1 -

The Gates Rubber Company

2 2 2 1 X 1 X 1 -

1 1 1 1 2 1 X 1 1 X 1 1 2 1 -

1 1 2 2 1 2 2 2 1 1 X 2 2 2 1 1 -

2 2 1 2 X X X X X X X X X 2 X 2 -

Polypro

Fluorocarbon

Brass

Butyl

1 1 1 1 X -

Aluminum

Neoprene

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1

Stainless Steel 316

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

™

1 -

Sanitron

UHMWPE

1 1 1 1 1 -

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated White Crystalline Solid White Crystal White Crystalline Powder Yellow Crystal or Powder White Crystalline Powder White Solid Colorless to Cloudy Liquid Colorless to Cloudy Liquid White Solid Colorless to white Solid Dark purple Crystal White Crystal Colorless to white Crystal White Crystal or Powder Red or yellow Crystal or Solid White Crystal or Powder Colorless crystal Liquid Colorless Gas Colorless Liquid Colorless Liquid Colorless Oily Liquid Colorless Liquid Colorless Liquid White-water Liquid Colorless Liquid Colorless Gas Colorless Liquid Colorless Liquid Liquid Colorless Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Colorless Liquid Liquid Liquid Liquid Liquid Liquid

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

Hypalon

SBR

NBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Potassium Cuprocyanide Potassium Cyanide Potassium Dichromate Potassium Ferrocyanide Potassium Fluoride Potassium Hydrate Potassium Hydroxide (45% Caustic Potash) Potassium Hydroxide, Liquid Potassium Iodide Potassium Nitrate Potassium Permanganate Potassium Persulfate Potassium Phosphate Potassium Silicate, Other Than Dry Potassium Sulfate Potassium Sulfide Potassium Sulfite Potassium Thiosulfate Primatol A, S, P (Ag Spray) Propane Gas Propanediol Propanol (Propyl Alcohol) Propionic Acid Propyl Acetate Propyl Alcohol (Propanol) Propyl Aldehyde Propyl Chloride Propylene Propylene Diamine Propylene Dichloride (Dichloropropane) Propylene Glycol Propylene Oxide Purina Insecticide Puropale RX Oils Pydraul 10E, 29E-LT, 30E, 60, 65E, 115SE Pydraul 135 Pydraul 150 Pydraul 280 Pydraul 312 Pydraul 50E Pydraul 540 Pydraul 625 Pydraul A-200 Pydraul F-9 Pyrene (Carbon Tetrachloride) Pyrethrum Pyridine (50%) Pyrogard 160, 230, 630 Pyrogard 51, 53, 55 Pyrogard C, D Pyronal (Transformer Oil)

Couplings / Adapters

Gates Hose / Polymers

EPDM

Industrial Hose

1 1 1 1 1 1 1 1 1 1 1 1 X 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 -

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 -

1 1 1 1 X 1 1 -

2 1 1 1 2 1 1 -

1 1 1 2 X -

Chemical Resistance Table

Industrial Hose Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

Renegade

Stallion ® Mustang 45HW T K

NBR

SBR

Neoprene

Butyl

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

2 1

2 2

1 1

Liquid Brownish to yellow Liquid Liquid Liquid Liquid

1 1 1 1 1 1 1 1

1 1 1 2 1 1 1 1

2 X 2 -

2 2 -

X 2 2 X X X

1 2 1 1 2 1

X X X -

2 2 X -

X 2 2 X X X

2 1 2 -

X X X -

2 -

1 1 2 1 1 1 1

2 2 2 2

1 1 1 2 1 1 -

1 1 1 1 1 1 -

1 1 1 1 1 -

1 1 1 2 1 1 -

1 -

White Powder Liquid Colorless Liquid Sludge Liquid Orange to colorless flake Brownish or yellow Liquid Liquid Liquid White Powder Colorless crystal Liquid Liquid Liquid Liquid Grayish Powder Liquid Colorless crystal Colorless to cloudy Liquid White Crystals or Powder White Crystal or Powder Red to clear Liquid Colorless Crystals to White Lumps White Crystals or Powder White Crystals Grayish Powder Colorless Crystals Colorless to white Crystals

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 2 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 1 X 2 1 1

1 1 1 1 1 1 1

2 1 1 2 1 X 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1

X 2 2 2 1 1 2 2 1 X X 1 1 1 X 1 1 2 1 1 1 1 1 1

2 2 2 2 1 X X 2 1 2 2 1 2 1 1 1 1 1 1

2 X X X 1 1 X X 2 1 2 2 1 2 1 1 1 1 1 1

2 2 2 1 2 2 1 1 X X 2 1 1 X 1 1 2 1 1 1 1 2 1

2 1 1 1 1 2 1 2 1 2 1 1 1 1 1 1 1 2 1

2 1 1 1 2 2 1 X 1 1 1 X 1 1 1 1 1 1 1 1 1

2 2 2 1 2 2 1 X X 1 1 1 X 1 1 2 1 1 1 1 1 1

1 1 2 1 1 1 1 1 1 1 1 1

1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 2 1 2 1 1 1 1 1 1

1 1 2 1 2 2 2 1 2 X 1 2 1 1 1 2 1 1 2 1 1 1 1 1 1

2 2 X 1 1 2 1 1 1 1 1 1 2 X 1 2 1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

2 2 1 1 1 X 1 X X X

2 2 1 1 1 2 1 2 1 2 X 2 2 X

1 1 1 1 1 1 -

EPDM

™

1 1

Sanitron

UHMWPE

Salicylic Acid Salt Water (Sea Water) Sauerkraut Sea Water Sevin Sewage Shampoo Shellac Shortening Silicate of Soda Silicone Greases Silicone Oils Silver Cyanide Silver Nitrate Skydrol 500A & 7000 Soap Oil Soap Solutions Soap, Liquid Soda Ash (Sodium Carbonate) Soda Water Sodium Acetate Sodium Aluminate Solution Sodium Benzoate Sodium Bicarbonate Sodium Bichromate Solution Sodium Bisulfate (Niter Cake) Sodium Bisulfite Sodium Borate (Borax) Sodium Carbonate (Soda Ash) Sodium Chlorate Sodium Chloride

Gatron

Ramrod (Ag Spray) Rando Oils Rape Seed Oil Red Oil (Commercial Oleic Acid) (MIL-5606) Refined Wax (Petroleum) Regal Oils R&O Richfield "A" Weed Killer Road Paving Compound Road Tar Rubilene Oils

Liquid Liquid

Form (at room temperature unless otherwise stated

Teflon

NOTE: Ratings are for the effect on the polymer only!

Chemical

Couplings / Adapters

Gates Hose / Polymers

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Quenching Oil Quintolubric 822

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

The world’s most trusted name in belts, hose and hydraulics.

167

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

X 1 1 1 1 2 X 2 X X X 2 X X 2 2 X X 1 1 2 1 2 2 2 2 1 1 1 2 X 2 2 1 2 1 -

2 2 1 1 2 2 2 2 1 1 X 2 1 X X 2 X X 2 1 2 1 X 2 2 2 1 X X 2 1 1 -

2 2 1 1 2 2 2 X 1 1 X 2 1 X X 2 X X 2 1 2 1 2 2 2 2 2 1 X X 2 2 1 1 -

X 1 1 1 2 2 X 1 2 2 2 1 X 2 X X 1 X 1 1 2 1 2 2 2 2 1 1 2 X X 1 2 1 -

2 2 1 1 1 2 2 2 2 1 2 2 2 2 2 2 1 2 1 1 2 1 1 2 1 1 2 1 2 X 2 X X 2 1 X -

X 1 1 1 1 2 1 1 1 X X X X 1 X 1 2 1 1 1 2 1 2 2 2 1 X 1 1 1 1 1 1 -

The Gates Rubber Company

2 X 1 1 2 2 1 1 1 2 2 1 1 1 2 2 X 1 1 1 2 1 2 2 2 2 2 1 2 2 X 2 1 1 -

1 1 1 1 1 1 1 1 X 1 1 1 1 2 1 1 1 1 1 1 X 1 1 -

X 2 1 1 2 2 X X X X 2 1 1 1 2 X 1 1 1 2 1 X 1 X 2 1 1 1 X X X 1 1 -

Polypro

X 1 1 1 2 1 2 2 2 2 2 2 2 1 1 1 2 2 2 2 1 1 1 1 1 1 2 1 1 1 X X X 2 1 1 -

Brass

SBR

1 1 1 1 1 1 1 2 X 1 -

Aluminum

NBR

UHMWPE 1 1 1 2 2 2 1 1 1 1 2 1 2 -

™

Gatron 1 1 1 2 2 1 1 1 1 1 2 1 2 2 1 1 1 1 1 1 1 2 1 2 1 2 2 1 1 2 1 1 2 1 2 1 1 1 1 1

™

2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated Sodium Chlorite Solution Colorless to cloudy Liquid Sodium Chromate Yellow, translucent Crystals Sodium Cyanide In Water Sodium Cyanide White Crystaline Powder Sodium Dichromate Red to red-orange Crystals Sodium Ferricyanide Ruby-red Crystals Sodium Ferrocyanide Yellow, transparent Crystals Sodium Fluoride (70%) White Liquid Sodium Hydrate White Solid Sodium Hydrochlorite Pale greenish Liquid Sodium Hydrosulfide Colorless needles Sodium Hydrosulfite Lemon colored Powder or flake Sodium Hydroxide (10%) Colorless Liquid Sodium Hydroxide (40%) Colorless Liquid Sodium Hydroxide (50% Under 212°F (100°C) Colorless Liquid Sodium Hydroxide (50%, Under 115°F (46°C) Colorless Liquid Sodium Hydroxide (50%, Under 180°F (82°C) Colorless Liquid Sodium Hydroxide (60%) White Liquid Sodium Hydroxide 25% Colorless Liquid Sodium Hypochlorite (20%) White Liquid Sodium Hypochlorite (5%) White Liquid Sodium Hyposulfate Large, transparent Crystals Sodium Metallic Silver Solid Sodium Metaphosphate Colorless Crystals to white Powder Sodium Nitrate Colorless crystal Sodium Perborate White, amorphous Powder Sodium Peroxide Yellowish white Powder Sodium Phosphate Colorless Crystals to white Powder Sodium Silicate Lumps of greenish glass Sodium Sulfate White Crystals or Powder Sodium Sulfate Decahydrate (Glauber's Salt) Crystals or Powder Sodium Sulfhydrate Colorless to cloudy Liquid Sodium Sulfide Yellow/Brick red flakes or Crystals Sodium Sulfide Solution Colorless to cloudy Liquid Sodium Sulfite White Crystals or Powder Sodium Sulfite Solution Colorless to cloudy Liquid Sodium Sulphydrate Colorless needles Sodium Thiocyanate Solution Colorless to cloudy Liquid Sodium Thiosulfate (HPO) White Powder Sodium Tripolyphosphate (STPP) White Powder Solnus Oils Liquid Sour Crude Oil Liquid Soybean Oil Pale yellow oil Spent Acid Liquid Stannic Chloride Colorless, fuming Liquid Stannic Sulfide Yellow to brown Powder Stannous Chloride (Under 150°F) White Mass Starch White amorphous Powder Starch gum (Dextrin) Yellow or White Powder Stauffer Jet 1 Liquid Stauffer Jet 2 Liquid

Stainless Steel 316

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

2 2 1 1 1 1 1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 X 2 X 2 1 1 1 -

2 2 2 2 X X X X X X 1 X X 1 1 X 1 1 X 1 1

1 1 1 2 2 2 X X X 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

1 1 2 1 2 2 2 2 2 2 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

X X X X X X X X X 1 2 1 1 X 2 X 1 1 1

X X X X X X X X X X 2 X X X X X 1 X 1 1

1 1 1 1 1 1 1 1 1 -

EPDM

Food & Bev. Mstr. S

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

168

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

1 2 1

X 2 2 1 X X 1

X X 2 1 X 1

1 2 2 X X 2 2

X X 2 2 X 2

X 2 2 2 2 2 2

X X 2 1 X X 1

2 1 1 1 1 1

Polypro

2 1 1 1 1 1 1

Brass

1 1 1 1 1 1 1 1

USE STEAM HOSE ONLY 2 2 2 2 2 1 2 X X - X 1 - 2 2 2 X X X X - X 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X 2 1 - X X 2 X X X X X 1 X X 2 X X X X X X 1 X X X 2 2 X X X X 2 1 2 2 2 2 1 1 2 X X X X X 1 2 1 1 1 1 1 X X X X X 2 2 2 2 1 1 1 X X X 2 1 1 X X X X 1 1 X X X X 2 1 X X X X X 1 X X X X X 1 X X X X X 1 X X X X X 1 X X X X X 1 X X X 2 1 X X X X X 1 1 - X 1 1 - X 1 1 - X 1 1 - X 1 - X - 1 1 2 1

Aluminum

2 X 2 X 1 1 2 X 2 2 1 1 1 2 1 X 1 1 1 2 X X X X X 1 1 X X X X X -

Stainless Steel 316

Fluorocarbon

1 2 X 1 1 1 1 1 1 X 1 1 1 1 2 2 2 2 X 1 1 X 1

Stainless Steel 304

Butyl

EPDM

1 1 1 1 1 X 1 1 1 1 1 1 1 1 X 1 1 -

™

1 2 2 2 1 1 1 1 X 2 2 1 2 1 X 1 1 1 1 2 X X X X 1 1 1 1 1 1 1 1

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Sanitron

Black liquid Liquid White to clear Solid or Liquid Faint Yellow Powder Yellow Liquid Yellow to dark brown Liquid White Crystalline Powder

UHMWPE

Tall Oil Tall Oil(Under 150°F (66°C) Tallow Tannic Acid Tannic Acid (10 %) Tar (Bituminous) Under 100°F (38°C) Tar Oil Tartaric Acid

Gatron

Chemical

Teflon

Form (at room temperature unless otherwise stated Gas Colorless Waxy Solid Colorless crystal or Powder Clear petroleum distillate White Powder Liquid Colorless Oily Liquid Liquid Liquid Liquid In Water Colorless Liquid Yellow Crystals Yellow Oily Liquid Colorless Gas or Liquid Colorless Liquid Colorless Gas Solid Colorless Water Solution Colorless Liquid Colorless Water Solution Colorless Water Solution Colorless Liquid Colorless to Brown Solution Colorless Liquid Colorless to Brown Oily Liquid Colorless Liquid Colorless to Brown Oily Liquid Colorless to Dark Brown Oily Liquid Colorless Liquid Colorless Liquid Liquid Liquid Liquid Liquid Liquid Viscous Liquid

Iron/Carbon Steel

PVC

Nylon

CPE

2 1 2 2 2 2 2 2 2 2 2 X 1 X 1 1 1 2 X X X X X 1 1 -

1 1 2 1 1 X 1 X 1 1 1 2 X X X X X 1 1 -

1 2 1 1 2 X 1 2 X 1 X X X X X X X X X X X 1 1 1 1 1 -

1 2 2 X 1 2 1 X X 2 1 X 1 2 2 2 2 2 -

X 2 2 1 X 2 2 2 X X X X X X X X X 1 1 1 1 1 -

2 1 2 X 1 X 1 2 X X X X X X X X X X X X 1 1 1 1 1

1 1 1 2 1 2 1 2 X 2 2 2 2 2 2 2 2 2 1 2 2 1 1 1 1 1 1

X X X 1 2 2 X X X X X X X X X 1 X 1 1 1 -

X 1 X 2 X 1 X X X X X X X X X X X X 1 -

1 X X X -

X X 2 2 1

1 1 X 1

1 1 1 1 -

X 2 1 1 2 -

2 2 2 1 -

X X 2 1 1 1 2

2 2 2 1 1 1 2

1 2 2 1 2

2 X X 2 -

NOTE: Ratings are for the effect on the polymer only!

Hypalon

Neoprene

SBR

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Steam Stearic Acid (Octadecanoic Acid) Stearin Stoddard Solvent STPP (Sodium Tripolyphosphate) Straight Synthetic Oils Styrene (Monomer) Sucrose Solutions Sugar, Liquid, Blended Sugar, Syrup Sulfamic Acid Sulfamic Acid 10% Under 170°F (77°C) Sulfate Liquors Under 150°F (66°C) Sulfur (Under 200°F (93°C) Sulfur Chloride Sulfur Dioxide Sulfur Dioxide (Dry) Sulfur Dioxide (Liquid) Sulfur Dioxide (Moist) Sulfur Hexaflouride (Gas) Sulfur Trioxide (Dry) Sulfuric Acid (10%) Sulfuric Acid (100%) Sulfuric Acid (30%) Sulfuric Acid (50%) Sulfuric Acid (60%) (48.5 deg Baume) Sulfuric Acid (75%) Sulfuric Acid (88%) (64.7 deg Baume) Sulfuric Acid (93%) Sulfuric Acid (96%) Sulfuric Acid (98%) Sulfuric Acid, Fuming (Oleum) Sulfurous Acid (10%) Sulfurous Acid (75%) Sun R&O Oils Suntac HP Oils Suntac WR Oils Sunvis Oils 700, 800, 900 Synthetic Oil (Citgo) Syrup

Couplings / Adapters

Gates Hose / Polymers

NBR

Industrial Hose

The world’s most trusted name in belts, hose and hydraulics.

169

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

Neoprene

Butyl

Fluorocarbon

2 2 1 1 2 2 2 X X X 2 X X 2 X X X X X X X 1 1 X X X X X 2 X 2 2 2 X X 2 2 2

2 X X X X X X X X X X X X X X X X X X X X X X X 2 X 2 X 2 2 2 X

2 X X X X 2 X X X X X X 2 X X X X X X X X X X 1 X X X X X 2 X 2 2 X 2 2 X X

2 X X X X X 2 X X X X X X X X X 2 2 X X X X 2 X 2 X X 2 2 X

2 X X X X X X 1 2 X X 2 2 X X 2 X X X X X X 2 X X X X X 2 2 X 2 2 X 2 2 2 X

X 1 1 1 1 2 1 1 1 2 1 2 1 1 1 1 2 2 1 X 1 2 1 1 1 1 1 2 1 1 1 1 X 2 2 1 1 1 X 1 1

The Gates Rubber Company

2 X 2 X X 2 X X X X 2 X X X X X X X X X X X X X 2 2 2 X 2

1 1 X X X 1 1 1 X 2 X 2 1 1 1 -

2 1 1 2 1 2 1 1 2 1 1 1 1 1 2 2 X 2 1 X 1 X -

Polypro

1 X X X X X 2 X X 2 X X X 2 X X X X X 2 X X X 1 1 2 1 X 2 2 1 X

Brass

SBR

X X X 2 X X X X X X 1 X 2 X

Aluminum

NBR

UHMWPE X 2 2 2 2 X X X X 1 X 2 X X -

™

Gatron 1 2 1 1 2 1 2 X 2 2 X 1 X 2 2 2 2 1 1 1 1 2 X 1 1 1 2 2 2

™

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Teflon

Form (at room temperature Chemical unless otherwise stated TEA (Triethanolamine) Colorless Viscous Liquid TEL (Tetraethyl Lead) Colorless Oily Liquid Tellus Oils Liquid Tenol Oils Liquid Tergitol (Ethoxylates and Ethoxysulfates of Alcohol) Terpineol Colorless Liquid or Crystal Tertiary Butyl Alcohol Colorless Liquid or Crystal Tetrachlorobenzene White Crystal Tetrachloroethane (Acetylene Tetrachloride) Colorless Liquid Tetrachloroethylene Colorless Liquid Tetrachloromethane Colorless Liquid Tetrachloronaphthalene Oily Liquid to Crystaline Solid Tetradecanol White Solid Tetraethyl Lead (TEL) Colorless Oily Liquid Tetraethylene Glycol Colorless Liquid Tetrahydrofuran (THF) Colorless Liquid Tetrahydroxydicyclopentadiene (JP 10)² Tetralin Colorless Liquid Theobromo Oil (Cocoa Butter) Liquid above 95°F (35°C) THF (Tetrahydrofuran) Colorless Liquid Thiopen Tin Tetrachloride Colorless Liquid Titanium Tetrachloride Colorless Liquid Toluene (Toluol) (Methyl Benzene) Colorless Liquid Toluene Diisocyanate (Hylene) Yellow Liquid Toluene Diisocyanate (Isocyanate) Water White to Yellow Liquid Toluidine Yellow Liquid or White Crystal Toluol (Toluene) Colorless Liquid Transformer Oil (Askarel Types)1 Liquid Transformer Oil (Petroleum Type)1 Liquid Transmission Fluid (Type A) Liquid Tributoxyethyl Phosphate Yellow Liquid Tributyl Phosphate Colorless Liquid Tricalcium Aluminate (Calcium Aluminate) Crystals or Powder Trichlorobenzene White Crystal or colorless Liquid Trichloroethane 1,1,1 (Methyl Chloroform) Colorless Liquid Trichloroethylene Colorless Liquid Trichloropropane Colorless Liquid Tricresyl Phosphate Colorless Liquid Triethanolamine (TEA) Colorless Viscous Liquid Triethylamine Colorless Liquid Triethylene Glycol Colorless Liquid Trihydroxybenzoic Acid (Gallic Acid) In Alcohol or Glycerol Trimethyl Phosphite Colorless Liquid Trimethylbenzene (Mesitylene) Liquid Trinitrophenol (Picric Acid) Yellow Crystals Trioctyl Phosphate Liquid Triphenyl Phosphate Colorless Powder Tripolyphosphate (STPP), (Sodium) White Powder Trisodium Phosphate (TSP) Colorless crystal Tung Oil Yellow drying oil 1 Petroleum hose only. 2Aircraft fueling hose only for fueling operations.

Stainless Steel 316

Stainless Steel 304

PVC

Iron/Carbon Steel

Nylon

CPE

NOTE: Ratings are for the effect on the polymer only!

2 1 2 2 2 X 1 X X X X X X 2 X 2 X X 1 2

1 1 2 2 1 2 1 1 1 1 1 1 1 1 1 X 1 X X 1

1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 2 1

1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1

1 X 1 1 1 X X X X X X 1

1 1 2 X 1 1 1 1 1 1 1 X X 1

X X X 2 1 1 -

EPDM

Food & Bev. Mstr. S

™

Sanitron

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

170

Couplings / Adapters

Gates Hose / Polymers

Hypalon

Industrial Hose

39496-000 June 3, 2002 Supersedes 39496-000 January 2, 1998

Note: For Explanation of Ratings, Refer to Page 142

Chemical Resistance Table

Contact Denver Product Application for recommendations for chemicals not listed. Phone (303) 744-5070

™

Food & Bev. Mstr.

T K

Renegade

Stallion ® Mustang 45HW

1 = Preferred - Constant Contact 2 = Acceptable - Intermittent Contact X = Not Recommended – = No Data

Ucon Hydrolube Types 150CP, 200CP Ucon Hydrolube Types 275CP, 300CP, 550CP Ucon M1 Undecanol (Undecyl Alcohol) Undecyl Alcohol (Undecanol) Union Hydraulic Tractor Fluid Urea Solution (100%)

Varnish Vegetable Oils Versilube F-50, F-44 Vinegar Vinyl Acetate Vinyl Chloride (Monomer) Vinyl Fluoride Vinyl Trichloride (Trichloroethane) Vitrea Oils VM&P Naptha (Mineral Spirits)

Waste Paint Water Water (Brine) Water (Deionized) Water (Distilled) Water (Potable) Water Glycols Water in Oil Emulsions White & Bagley No. 2190 Cutting Oil Wines Wood Oil

Xylene (Dimethylbenzene) Xylenol (Dimethylphenol)

Zeric Zinc Acetate Zinc Chloride Solutions Zinc Chromate Zinc Hydrate Zinc Oxide Zinc Sulfate Solutions

SBR

Neoprene

Butyl

Fluorocarbon

Hypalon

CPE

Nylon

PVC

Iron/Carbon Steel

Stainless Steel 304

Stainless Steel 316

Aluminum

Brass

Polypro

™

NBR

EPDM

Sanitron

Chemical

UHMWPE

(at room temperature unless otherwise stated Liquid oil 1

Gatron

Teflon

Form

NOTE: Ratings are for the effect on the polymer only!

Turpentine

Couplings / Adapters

Gates Hose / Polymers

Industrial Hose

Liquid Liquid Liquid Colorless Liquid Colorless Liquid Brown Liquid Liquid

1 1 1 1 1 1 1

1 1 1 1

1 1 X -

1 1 1 1 1 1 2

X 1

X 2 2 1

1 X 1 X 2

1 2 2 -

2 2 1

1 2 1 1 1

2 2 2 2 2

1 1 1 1

1 1 1 -

Liquids Liquid Brownish to colorless Liquid Colorless Liquid Colorless Gas Colorless Liquid Liquid Colorless Liquid

1 1 1 1 1 1 1 1 1 1

2 1 1 2 1 1 1

1 X -

X 2 1 2 X X

X 2 2 X X X X X

X 2 2 X X X 1 1

X X 2 2 X X X X

X 2 2 2 X X X -

X X 2 2 2 X X X X

2 1 1 X 2 1 1 1

X 1 2 X X X X X

1 2 1 X X -

1 1 1 X 1 1

2 2 1 X X 2 -

2 1 1 X 2 1 1

1 1 1 2 1 1 1 1

1 1 1 1 2 1 1 1

1 1 X 1 1 2

2 1 X 2 X 1

Liquid to semi-Solid paste Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid Liquid

1 1 1 1 1

1 1 1

1 1 1 1

1 1 1

1 1 -

1 1 1

1 -

1 1 1

1 1 1 1 1

1 1 2 1

1 1 -

1 2 1 -

X X

1 1 1 1 1 2 1 1 2 1 1 1 1 2 1 USE FDA HOSE ONLY X X X X X 1 X X 2 X

1 1

X 2

1 1

1 1 1 1

1 1 1

2 2 -

1 2 -

1 1 -

1 -

1 1 1 -

Colorless Liquid White solid, liquid @ 68°F (20°C)

1 1

2 1

X -

1 1

X -

White Crystal Colorless to cloudy Liquid Yellow Solid White or gray Powder Colorless to cloudy Liquid

1 1 1 1 1 1 1

1 1 1 1 1

1 -

X 2 2

1 X 1 2

2 2 X

X 1 2

X 2 2 2

X 1 -

X 1 1 2

1 1 1

2 X 1 2

2 1 2 1 1 2

1 X X

1 2 1 2

1 1 1 1

1 X X

The world’s most trusted name in belts, hose and hydraulics.

171