DESIGN BOLLARDS AND BARRIERS
DESIGN BOLLARDS AND BARRIERS
TABLE
OF CONTENTS
Ground fixings Locking combinations
05 06/07
STAINLESS STEEL BOLLARDS Light Bollards NIGHT GLOW Bollard ø 61 mm Bollard ø 76 mm Bollard ø 102 mm Bollard ' 70 x 70 mm Bollard, versenkbar Bollard ø 76 mm Poller ø 205 + ø 306 mm Bollard V4A Wire Cable system with/without handrail Barrier System with/without handrail Stainless Steel Barrier Stainless Steel Barrier, tiltable Cycle Stand Accessories
08 10 12 12 13 13 13 14 15 15 16 17 18 18 19 20
DESIGN BOLLARD VARIO Everything is possible! Basic bollard, triangular Basic bollard, quadrangular Sketches bollards Accessories
24 26 28 29 30 31
CORTEN-STEEL Bollards ' 122 x 122 mm Bollards + 132 mm ORNAMENTAL BOLLARDS Ornamental Bollard, Steel ø 60 mm Ornamental Bollard, Steel ø 76 mm Ornamental Bollard, aluminium ø 76 mm, round Ornamental Bollard, steel ø 76 mm, round Ornamental Bollard, aluminium ø 102 mm Ornamental Bollard, steel ø 102 mm Ornamental Tube Bollard, steel Ornamental Bollard, special material Ornamental Bollard, aluminium, conic Ornamental Bollard, Steel, conic
4
32 34 35 36 38 38 39 39 40 40 41 41 42 43
Ornamental piller, steel ø 195 mm Ornamental Bollard, steel ' 100 x 100 mm Ornamental Bollard, aluminium ' 70 x 70 mm Ornamental bollard, steel ' 70 x 70 mm Trellis / Tree protectors Accessories FUNCTIONAL BOLLARDS Mobile plastic posts ø 48 mm Bollards , plastic ø 60 mm Parking post, plastic Kerbs, plastic Drive-in bollards, steel ø 32 mm Bollards, steel ø 48 mm Bollards, steel ø 60 mm Bollards, steel ø 76 mm Bollards, steell ø 102 mm Bollards, steel ' 70 x 70 mm Bollards, steel, tiltable ' 70 x 70 mm Barrier, steel ' 70 x 70 mm Bollards, aluminium ø 60 mm Bollards, aluminium ø 76 mm Bollards, aluminium ' 70 x 70 mm Bollards, aluminium ø 102 mm Safety Bollards, aluminium ø 76 mm Bollards, aluminium , ' 70 x 70 mm, retractable Double-arm bollards, aluminium and hot-dip galvanised steel 70 x 70 mm Tree barriers, steel ø 60 mm Tree holder, steel Accessories BARRIERS Barrier AS 505/AS 510 Barrier TUB 1000 Barrier TUB 1010 Barrier TUB 2020 FLEXY® Shock Absorbing Barrier FLEXY® Flexible Barrier FLEXY® Flexible Bollard with signal ring Barrier AS 525 Park Protect Solar/Park Protect Barrier Accessories
44 44 45 45 46 48 50 52 52 53 53 54 54 55 55 56 56 57 57 58 58 59 59 60 61 62 63 63 64 66 68 68 69 69 70 70 71 72 72 73 74
GROUND FIXINGS
Our bollards offer you best possible variability in the combination of different ground fixings and lockings! You can choose between up to nine different fixing versions. The new developed ground sleeves made of aluminium offer you a resonance-free and safe fixing of bollards in ground sleeves.
.../1
.../2
Bollard retractable from the supplied ground sleeve without locking The bollard is simply put into the concrete-in ground sleeve and can be released at any time without the use of a key.
.../3
Bollard with baseplate for surface fixing The bollard is screwed to the ground. For steel and aluminium, the baseplate is square 200 x 200 mm. For stainless steel, the baseplate is round with a diameter of 165 mm.
.../4
Bollard with locking, removable from the supplied ground sleeve The bollard is put into the concrete-in ground sleeve and locks automatically. The release of the locking mechanism can be achieved by means of a triangular key or profile cylinder key.
.../5
Bollard with locking, tiltable The bollard mounted on a baseplate is equipped at the foot with a tilt joint. With the use of a key the bollard can be tilted. Baseplate 100 x 200 mm, distance between holes: 160 mm.
.../6
Bollard with locking, tiltable with lifting mechanism The bollard is pressed down with the foot and tightend. By applying mild pressure on the trigger, the bollard erects and locks automatically. Baseplate made of a robust special cast-iron construction, 200 x 100 mm, distance between holes 160 mm.
Wall fixing .../22
Bollard for setting in concrete The bollard is concreted in with the corresponding ground fixing.
Drive-in bollard .../8
Retractable .../9
Bollard self righting for surface fixing The baseplate is equipped with a spring mechanism, which erects the bollard after a possible hitting (up to approx. 30° inclination) automatically. Safety bollard with „easy break“ function When hitting the bollard, it breaks from the baseplate screwed to the bollard. By inserting a new screw, the blocking function of the bollard will be restored. Bollard, self-righting (30°) with „easy break“ function Combines the preferences of the type…/8 and …/9
Insert plate .../89
5
COMBINATIONS LOCKING SYSTEMS
You can choose between different locking combinations: - The triangular locking system DK according to DIN 3223. Each delivery with this locking system includes one triangular key free! - If required, we also deliver DK-lockings according to DIN 3222! - The PZ-locking option different locking CO, cylinder 3 keys 30/10 - PZ-locking option simultaneous locking CI cylinder keyed alike 30/10 with three keys - PZ with master locking system CM, with different locking posts and master key. (The key has to be ordered separately) - PZ SC (cylinder self supplied) in which you can insert your own commercial profile half cylinder 30/10. - If requested, PZ-locking with 9 mm triangular lock (SP 8). Each delivery with this locking option includes one key! - Combination cylinder & triangular key DK/... so that both lockings allow independently of one another unlocking or locking of the post. Here the triangular lock can be combined with the profile cylinder locking mechanism mentioned before. - Locking combination of 2 profile cylinders PZ + PZ on request - Padlock - KABA profile half cylinder on request
6
.../1
.../2 300
270
260
220
177
475
900 without top
850
825
900 without top
850
COMBINATIONS LOCKING SYSTEMS
.../5
.../4
.../6
7
STAINLESS STEEL
STAINLESS STEEL BOLLARDS Stainless steel
MATERIALS SURFACES Grain 240 blasted
Polished RAL-colours glass-bead blasted
Stainless steel bollards are an economic investment in the future. - representative design - well made - corrosion free for longer life of the surface - maintenance free and reliable technology Stainless steel bollards effectively emphasize representative areas and highly frequented zones. The quality Our products are made of high-quality materials. We only use stainless steels of the quality V2a and V4a. Steel bollards, rust-free. Rust-free stainless steels are used there, where durability is wanted and particular expectations are expressed
towards the stability of the components over a very significant period. The combination of chrome and nickel gives the stainless steel characteristics, which make it suitable for use in bollards. Stainless steel is mostly resistant against salt and acids, rustfree and available in polished and glass-beaded surface. Stainless steel products are insensitive to environmental influences and are characterized through hardness, toughness and high cooling compatibility. Please observe the following maintenance tips: Conditions for a long-lasting resistance of all components of rustfree stainless steel: The surface must always be clean. The surface must be without any damages: Please avoid damages during cleaning or repair works due to hard, especially metal-
lic objects of not stainless material. The surface must not be brought in contact with rusting components: Rust from external sources as well as flash rust provoke the appearance of rust on stainless steel parts. When such discolorations occur, they have to be removed as soon as possible. We recommend the surface protection for stainless steel OaE, 400 ml, sufficient for approx. 20 bollards and the stainless steel polishing and cleaning paste PaE, 500 g, sufficient for approx. 100 bollards.
9
STAINLESS STEEL BOLLARDS
Solar
NIGHT GLOW
Light Bollard generation NIGHT GLOW ASE-NG 50/1 - .../4 - Current supply of the LED-technology by a solar field in the top of the bollard. - Solar cell stroke protected under 8 mm acrylic glass. - Control by twilight sensor. - No electric installation necessary. - Energy storage is sufficient, according to position and light conditions, between six and twelve hours. - Assembly of the post without any problems by screwing. - Battery replacement possible. - For the production of an individual design you are accruing once-off clich‘ costs.
TECHNICAL DATA: - Surface: Polished stainless steel - Bollard ø: 102 mm - Height Bollard above ground: 900 mm - Baseplate ø: 165 mm DESIGNS: - Flat top with solar field - Field size: 40 x 270 mm or 70 x 70 mm - Laser cut highlighted with acrylic glass - available in white or blue
ASE-NG 50/...
Solar top
ASE-NG .../1
ASE-NG 50/1
ASE-NG .../2
ASE-NG 50/2
ASE-NG .../3
ASE-NG 50/3
ASE-NG .../4
ASE-NG 50/4
Laser cut highlighted with acrylic glass
Optional with ashtray
11
Edelstahl-SperrBollard ø 76 mm ASE 46/1 - .../89 ASE 32/1 - .../89 ASE 47/1 - .../89 ASE 48/1 - .../89 ASE 49/1 - .../89 - High-quality appearance. - Technically functional design with demanding ornamental appearance.
Bollard, stainless steel ø 61 mm ASE 39/1 - .../4 ASE 30/1 - .../4 ASE 37/1 - .../4 ASE 38/1 - .../4 ASE 31/1 - .../4 - For architecturally demanding areas, parks and gardens.
TECHNICAL DATA: - Bollard ø: 76 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = ø 165 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Bollard ø: 61 mm - Height above ground: 900 mm - Baseplate ø: 165 mm DESIGNS: - Flat top, stainless steel - Round top, Half-round cover, stainless steel - Pointed top, stainless steel - Half-round cover, stainless steel - Chain top, plastic, blue
ASE 39/... ASE 30/... ASE 37/... ASE 38/... ASE 31/...
Half-round- Chain top ed top
Flat top
Round top
Pointed head
ASE .../1
ASE 39/1
ASE 30/1
ASE 37/1
ASE 38/1
ASE .../2
ASE 39/2
ASE 30/2
ASE 37/2
ASE .../3
ASE 39/3
ASE 30/3
ASE .../4
ASE 39/4
ASE .../5
DESIGNS: - Flat top, stainless steel - Round top, half-round cover, stainless steel - Pointed top, stainless steel - Half-round cover, stainless steel - Chain, plastic, blue
ASE 46/... ASE 32/... ASE 47/... ASE 48/... ASE 49/...
Half-round- Chain top ed top
Flat top
Round top
Pointed head
ASE 31/1
ASE 46/1
ASE 32/1
ASE 47/1
ASE 48/1
ASE 49/1
ASE 38/2
ASE 31/2
ASE 46/2
ASE 32/2
ASE 47/2
ASE 48/2
ASE 49/2
ASE 37/3
ASE 38/3
ASE 31/3
ASE 46/3
ASE 32/3
ASE 47/3
ASE 48/3
ASE 49/3
ASE 30/4
ASE 37/4
ASE 38/4
ASE 31/4
ASE 46/4
ASE 32/4
ASE 47/4
ASE 48/4
ASE 49/4
---
---
---
---
---
ASE 46/5
ASE 32/5
ASE 47/5
ASE 48/5
ASE 49/5
ASE .../8
---
---
---
---
---
ASE 46/8
ASE 32/8
ASE 47/8
ASE 48/8
ASE 49/8
ASE .../9
---
---
---
---
---
ASE 46/9
ASE 32/9
ASE 47/9
ASE 48/9
ASE 49/9
ASE .../89
---
---
---
---
---
ASE 46/89 ASE 32/89 ASE 47/89 ASE 48/89 ASE 49/89
12
Bollard, stainless steel ø 102 mm ASE 64/1 - .../89 ASE 34/1 - .../89 ASE 65/1 - .../89 ASE 66/1 - .../89 ASE 68/1 - .../89 - For the representative protection of pedestrian zones. - High-quality design. - With functional equipment.
Bollard, stainless steel ' 70 x 70mm ASE 52/1 - .../5
TECHNICAL DATA: - Bollard ø: 102 mm - Height above ground: 900 mm - Baseplate ø: 165 mm
TECHNICAL DATA: - Bollard ø: 70 x 70 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = ø 165 mm Ground fixing .../5 = 200 x 100 mm
DESIGNS: - Flat top, stainless steel - Round top, half-round cover, stainless steel - Pointed top, stainless steel - Half-round cover, stainless steel - Luminous head with a solar top, stainless steel
ASE 64/... ASE 34/... ASE 65/... ASE 66/... ASE 68/...
Bollard, stainless steel retractable ASE 330 - A functional, formally independent solution. - Particularly easy-to-handle. - With reliable locking technology. - Individually useable in pedestrian zonesand parks.
DESIGNS: - Pointed top, stainless steel
NEW
ASE 52/...
TECHNICAL DATA: - Bollard ø: 70 x 70 mm - Height above ground: 900 mm - Length below ground: 1160 mm DESIGNS: - Flat top with drawbar eye for retractable Bollards
ASE 330 im versenktem Zustand abschliessbar!
Half-round- Solar top ed top
Flat top
Round top
Pointed head
Pointed head
Flat top
ASE 64/1
ASE 34/1
ASE 65/1
ASE 66/1
ASE 68/1
ASE 52/1
---
ASE 64/2
ASE 34/2
ASE 65/2
ASE 66/2
ASE 68/2
ASE 52/2
---
ASE 64/3
ASE 34/3
ASE 65/3
ASE 66/3
ASE 68/3
ASE 52/3
---
ASE 64/4
ASE 34/4
ASE 65/4
ASE 66/4
ASE 68/4
ASE 52/4
---
---
---
---
---
---
ASE 52/5
---
ASE 64/8
ASE 34/8
ASE 65/8
ASE 66/8
ASE 68/8
---
---
ASE 64/9
ASE 34/9
ASE 65/9
ASE 66/9
ASE 68/9
---
---
ASE 64/89 ASE 34/89 ASE 65/89 ASE 66/89 ASE 68/89
---
ASE 330
13
Bollard, stainless steel ø 76 mm ASE 36/1 - .../89 ASE 54/1 - .../89 - Bollards in ornamental appearance. - Rings shaped from the tube. - For the use in spacious areas
Bollard, stainless steel ø 76 mm ASE 35/1 - .../89 ASE 56/1 - .../89 - High-quality ornamental appearance. - Rings molded from the tube. - For the use in highly frequented zones. - Striking accents in architectural environment.
TECHNICAL DATA: - Bollard ø: 76 mm shaped - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = ø 165 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Bollard ø: 76 mm shaped - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = ø 165 mm Ground fixing .../5 = 200 x 100 mm
DESIGNS: - Round top, half-round cover, stainless steel - Half-round cover, stainless steel - For the equipment with PZ or chain eye the upper ring is omitted.
DESIGNS: - Round top, half-round cover, stainless steel - Half-round cover, stainless steel - For the equipment with PZ or chain eye the upper ring is omitted.
ASE 36/... ASE 54/...
ASE 35/...
ASE 56/...
Round top Half-rounded top
Round top
Half-rounded top
ASE .../1
ASE 36/1
ASE 54/1
ASE 35/1
ASE 56/1
ASE .../2
ASE 36/2
ASE 54/2
ASE 35/2
ASE 56/2
ASE .../3
ASE 36/3
ASE 54/3
ASE 35/3
ASE 56/3
ASE .../4
ASE 36/4
ASE 54/4
ASE 35/4
ASE 56/4
ASE .../5
ASE 36/5
ASE 54/5
ASE 35/5
ASE 56/5
ASE .../8
ASE 36/8
ASE 54/8
ASE 35/8
ASE 56/8
ASE .../9
ASE 36/9
ASE 54/9
ASE 35/9
ASE 56/9
ASE 36/89 ASE 54/89
ASE 35/89
ASE 56/89
ASE .../89
14
V4A
Bollard, stainless steel ø 205 mm und ø 306 mm ASE 44/1 - .../4 ASE 45/1 - .../4 - Useable for the safe protection in urban areas, parks and recreation areas. - For discreet creative accents in public areas.
TECHNICAL DATA: ASE 44/1 - .../4 - Poller ø : 205 mm - Height above ground: 600 mm ASE 45/1 - .../4 - Poller ø: 306 mm - Height above ground: 600 mm DESIGNS: - Flat top, stainless steel
ASE 44/... ASE 45/...
Bollards, stainless steel ø 76 mm V4A ASE 83/1 - .../89 ASE 84/1 - .../89 ASE 85/1 - .../89 ASE 86/1 - .../89 - Mostly resistant against salt and acids. - Insensitive to environmental influences. - Very easy to clean due to smooth, nearly non-porous surfaces.
TECHNICAL DATA: - Bollard ø: 76 mm - Height above ground: 900 mm + top - Baseplate: Ground fixing .../3 = ø 165 mm Ground fixing .../5 = 200 x 100 mm DESIGNS: - Flat top, stainless steel - Round top, half-round cover, stainless steel - Slanted top, stainless steel - Chain top, stainless steel
ASE 83/... ASE 84/... ASE 85/... ASE 86/...
Flat top
Flat top
Flat top
ASE 44/1
ASE 45/1
ASE 83/1
ASE 84/1
ASE 85/1
ASE 86/1
---
---
ASE 83/2
ASE 84/2
ASE 85/2
ASE 86/2
ASE 44/3
ASE 45/3
ASE 83/3
ASE 84/3
ASE 85/3
ASE 86/3
ASE 44/4
ASE 45/4
DK
DK
ASE 83/4
ASE 84/4
ASE 85/4
ASE 86/4
---
---
ASE 83/5
ASE 84/5
ASE 85/5
ASE 86/5
---
---
ASE 83/8
ASE 84/8
ASE 85/8
ASE 86/8
---
---
ASE 83/9
ASE 84/9
ASE 85/9
ASE 86/9
---
---
ASE 83/89 ASE 84/89 ASE 85/89 ASE 86/89
Please note: The Bollards of version*.../4 are not put into a ground sleeve, but screwed on a baseplate with a central triangular locking mechanism in the top.
Round top Slanted top Chain top
15
SATURN
System
STAINLESS STEEL BARRIER SYSTEM
WITH OR WITHOUT HANDRAIL Tensile Cable Barrier without handrail ESE/MSE/ESF With the combination of bollards and wire cables, technologically perfect solutions are used. Also available with handrail! - Connection of stainless steel bollards with two wire cables to a barrier system of a good style with high-quality technical feature. - with a maximum wire cable length of 10 m and a maximum Bollard distance 3 m the Bollard distances are frely selectable.
1300
End post
End post Handrail
150
ø 76,1
900
400
90
TECHNICAL DATA: Bollard ø: 76 mm Height Bollard above ground: 900 mm Wire cable ø: 6 mm (Handrail ø: 42,4 mm)
Distance between end posts: ø 135
ø 165 ø 14
ESE 46/... ESE 32/...
Wire cable set, fabricated incl. tensioner/terminal/2 cables DGE DGE DGE DGE DGE DGE DGE DGE DGE DGE 1 2 3 4 5 6 7 8 9 10
16
DGE H x (l/m)
End- or middle post with round top, concrete-in version
ESE 32/1
End post with round top, concrete-in version in optics „Baseplate for surface fixing“
ESE 32/3
Middle post with round top, with baseplate for surface fixing
MSE 32/3
End- or middle post with flat top, concrete-in version
ESE 46/1
End post with flat top, concrete-in version in optics „Baseplate for surface fixing“
ESE 46/3
Middle post with flat top, with baseplate for surface fixing
MSE 46/3
With MSE 46/... MSE 32/... handrail
Flat top
Round top
ESE 46/1
ESE 32/1
ESE 46/3
ESE 32/3
MSE 46/3
MSE 32/3
Flat top
DFE 10/20/SO/1 --DFE 10/20/SO/3
STAINLESS STEEL BARRIER SYSTEM
WITH OR WITHOUT HANDRAIL Rail system without handrail GFE/GRE Its elegant appearance underlines the architectural environment of modern cities and residential areas. Due to its solidity it offers extraordinary advantages and comfort in highly frequented zones. Also available with handrail! - The stainless steel bollards are connected by two rails. - Complete sets of two posts incl. Rails and connecting sets.
End post
End post
Handrail
900
ø 76,1x2
ø 135
410
TECHNICAL DATA: Bollard ø: 76 mm Height Bollard above ground: 900 mm Rail ø: 42,4 mm Handrail ø: 42,4 mm
ø 42,4x2
400
150
Distance between end posts:
ø 14
ø 165
Additional set: 1 post and 2 rails including connecting set
2 posts with round top and 2 rails incl. connecting set Distance between end posts:
Setting in concrete
Surface fixing
1m
Order no.
GRE 1/1
GRE 1/3
GRE 12/1
GRE 12/3
2m
Order no.
GRE 2/1
GRE 2/3
GRE 22/1
GRE 22/3
Special lengths Order no. max. 2m
GRE S/1
GRE S/3
GRE S2/1
GRE S2/3
GFE ...
Flat top
Additional set: 1 post and 2 rails including connecting set
2 posts with flat top and 2 rails incl. connecting set
GRE...
With handrail
Round top
Flat top
GFE
GRE
1/2/S/1
1/2/S/1
GFE 10/20/ SO/1
---
---
---
GFE 10/20/ SO/3
Distance between end posts:
Setting in concrete
Surface fixing
1m
Best.-Nr.
GFE 1/1
GFE 1/3
GFE 12/1
GFE 12/3
2m
Best.-Nr.
GFE 2/1
GFE 2/3
GFE 22/1
GFE 22/3
GFE
GRE
Special lengths Best.-Nr. max. 2m
GFE S/1
GFE S/3
GFE S2/1
GFE S2/3
1/2/S/3
1/2/S/3
17
Barrier, stainless steel ASE 40/1 - .../8 - Extraordinary strong appearance. - For the protection of pedestrian areas and parkways against traffic. - With high signal effects. - Optional with retention rails for locally installed labelling fields.
Barrier, stainless steel, tiltable ASE F 1000 - High quality, finely polished surface. - Immediate visualization of the function. - Highest reliability. - Representative design. - Lockable with profile cylinder.
TECHNICAL DATA: - Surface: Polished - Tube ø : 76 mm - Bar width: 650 mm - Total length: 650 mm - Height above ground: Type 40/3 and 40/8 650 mm - Height above ground: Type 40/1 450 mm
TECHNICAL DATA: - Surface: Polished - Support tube ø: 76 mm - Pipe bends ø: 32 mm - Bar width: above all 820 mm - Height above ground: 630 mm
20
4, 5
0,2 8,5 +- 0,0
1,5
Round top
5
10
•
ASE 40/...
4,
90
•
110
100
- Optional mit Halteschienen für bauseitiges Beschriftungsfeld.
ASE F ... ASE .../1
ASE 40/1
ASE .../3
ASE 40/3
ASE .../8
ASE 40/8
18
acier inoxydable
ASE .../5
ASE F 1000/5
Bike stand FSE 101-103 - High-grade materials and the quality of the fabrication guarantee high resistance to weather influence. - Its durability, profitability and the environment- friendly use make them the ideal bike stand for all ages. - Due to the special design without sharp edges and borders, the risk of injury is minimised. - Suitable for bikes of all sizes, from children bikes to mountain bikes. - An optimal stability offers the special shape. - Up to 5 bikes can be parked at the same time. - Stainless steel nature
300
540 840
Bike stand FSE 201 - 203 - The quality of the materials and surfaces guarantees a high resistance to weather influence. - Version is robust towards mechanical stress, durable, profitable and environmentally friendly. - Due to the extraordinary lean-to-bar design, a lock protection is possible at the bike, but also at the frame. - Round tubes without corners and edges minimize the risk of injury. - Stainless steel pickeled
1240 ø 345
ca. 1220
acier inoxydable
FSE.../3
FSE 103
492 300 320
acier inoxydable
FSE 101
245
FSE ...
FSE ...
FSE.../1
194
1600
FSE.../1
FSE 201
FSE.../3
FSE 203
Single parker Tubeø mm
Tube distance between the rings mm
Width x Height
Setting in concrete
48,3
50
1220 x 492
Surface fixing
48,3
50
1220 x 792
Baseplate
Tubeø mm
Weight (kg)
Order no.
30
FSE 101
Setting in concrete
13 x 6 cm 30
FSE 103
Surface fixing
-
Width x Height
Weight (kg)
Order no.
48,3
1600 x 840
15
FSE 201
48,3
1600 x 540
15
FSE 203
19
ACCESSORIES Order-No.
EAK
Stainless steel chain wire- ø 5 mm, length 36 mm, Order per M
EKO-M
Eye connector stainless steel fixed from the inside.
EKB-M
Eye connector, blank, mounted
AGP
NEW
We don‘t recommend eyes for tiltable bollards.
Position at the post: ° 90
B Eye
A
50 mm
C
ilting direction is always
B
D
130150 mm
Position of the triangular lock and/or of the profile cylinder
D
20
Rubber buffer for ground fixing type .../1, .../2,.../3 and .../4 with triangle: For Bollards with baseplate(.../3) the mounting height of the baseplate must be considered.
B
D
C
For triangular and/or profile cylinder: Eye under cylinder
ESL
Stainless steel shackle, with hexagonal screw for fixing the chain at the post. approx. 23 x 33 mm Depth bolt with hexagonal screw
EVG EVK
Stainless steel chain connectors Dimensions approx. 6 x 33 mm Dimensions approx. 4 x 23 mm
ESG ESK
Stainless steel chain connectors threaded Dimensions 7 x 52 mm Dimensions 5 x 39 mm
ACCESSORIES Order-No.
EZR-1 EZR-2 EZR-3
Stainless steel base finishing rings for the following ground fixings: - Concrete-in version - Retractable from the ground sleeve without locking - Retractable from the ground sleeve with locking ø 61 mm / ø 76 mm / ø 102 mm
RAE RAR RAS
Reflectable tape, 50 mm wide silver grey, red, black
EDA-1 EDA-2 EDA-3 EDA-4
Stainless steel protective footplates for posts with baseplate for surface fixing ø 61 mm / ø 76 mm / ø 102 mm ' 70 mm
AS-DL
Expansion bolts (1 pair) for inserting in concrete or natural stone for drilling ø 14 mm, M 8 x 100 Length approx. 100 mm
PAE
Cleaning polish for stainless steel 500 g, sufficient for approx. 100 bollards surface protector for stainless steel Long-term preservative, 400 ml sufficient for approx. 20 bollards
OAE
ELW
NEW
Luminous head with a solar top, position light for ø 102 mm stainless steel, white light
21
ACCESSORIES Order-No.
AS-KP
Baseplate setting in concrete for all tiltable bollards Base plate approx. 200 x 100 mm Shaft length approx. 360 mm incl. M12 Nirosta-screws
AS-UB
U-bolt for all tiltable bollards, M 12 thread incl. U-washers and nuts. For all bollards with baseplate 200 x 100 mm.
AS-MA
Baseplate for concrete-in version for posts which can be screwed on with spring mechanism (type .../8), Predetermined breaking point (type .../9) and a combination thereof type .../89) incl. connecting screws.
Bodenhülse mit Edelstahlkragen Befestigung der EdelstahlBollard. ø 61 mm / ø 76 mm / ø 102 mm ' 70 mm Abdeckung und Abdeckungsschlüssel aus
22
BV-60 BV-76 BV-102 BV-70
Base sockets made of aluminium for resonancefree fastening mounting of the stainless steel bollards. ø 61 mm / ø 76 mm / ø 102 mm ' 70 mm Cover and key in plastic available.
BD-60 BD-76 BD-102 BD-70 für DK
Cover in plastic with extractor key. For BD-70 the triangular key DKS is required (not included with delivery)
DKS
Triangular key (complies with DIN 3223)
CM CI SP8
Key for master lock Key for profile cylinder simultaneous locking Key for 9 mm PZ-triangular lock
ACCESSORIES Order-No.
B Öse
A
C
ASE-AB ASE 32/3-AB
Wall mounted ashtray Floor standing ashtray
GRE-1-AB GRE-3-AB
Sizes: ø 76 mm and ø 102 mm Rail system with ashtray
ASK
Chain attachment Pos. B for bollards round and squared, incl. cylinder lock Pos. D. 3 keys included with delivery
EHS-M
Support bar mounted, for ASE -40/... for a locally installed labelling fields.
D
100
°
90
BS
Concrete base incl. ground sleeve: BS-60 for 60 mm BS-76 for 76 mm BS-102 for 102 mm BS-70 for 70 x 70 mm BS-T5 for all tiltable bollards
23
NEW
24
DESIGN BOLLARD VARIO Aluminium nature RAL-Töne
Aluminium
SURFACES
MATERIALS
Basic bollard
Basic bollard
MATERIALS
SURFACES
Insert elements Steel
stainless steel
Cortensteel
Insert elements Galvanized grain 240
Oxidised
RALcolours
A new generation of bollards! Highquality, versatile and highly flexible. With the Vario bollard system you can create individual combinations of shape, colour and materials offering the designer of places the freedom to open up a wide area for the individualisation of barrier systems combined with design. Vario system bollards are available in triangular or square shape. Depending on your wishes, the basic posts made of aluminiuim form the basis and can be selected in different colours.
ble décor elements as inserts of different materials. Whether stainless steel, Corten-steel or high-quality powder coated steel.
surrounding architecture or to support the company‘s CI. All combinations are possible due to the diversity of colours and materials.
With the help of inserts, you give your bollards an individual design! The screwed cover plate protects your bollard against dirt and vandalism.
If you use advertising logos you will have further possibilities to experience the diversity of the Vario bollards and to design the places where they appear.
Optionally additional system components underline the variability and offer the use at almost all locations.
You can select from the complete RAL-range. The intelligent profile system allows the use of exchangea-
Individual design Vario bollards bring their message in the public. Whether to adapt to the
Due to the combination options and the colour design of individual system components according to RAL almost limitless potential for décor combinations is offered.
25
EVERYTHING IS
POSSIBLE WITH VARIO HIGH-QUALITY, VERSATILE AND INDIVIDUAL VARIO BOLLARD SYSTEM The assembly of the bollard is simple and systematic. First decide the shape you would like to have and select then the triangular or square shape. Afterwards you determine the colour of your basic bollard. Finally you select the required locking and ground fixing. The insert elements make your bollard individual. You can select between three different materials. Stainless steel, Corten steel or high-quality powder coated, galvanised sheet steel. When the combination has been done, you will get your individually designed bollard.
26
All RAL-colours are possible!
Aluminium basic posts Triangular
Aluminium basic posts square
Shape
Shape
narrow
Insert elements
Colour
Locking system
broad
Ground fixing
27
DESIGN BOLLARDS Basic bollard, triangular
NEW
Design bollard Vario triangular AS-VP 31/1 - .../4 TECHNICAL DATA: - Surface: optional - Bollard +: 122 x 122 mm - Height above ground: 900 mm DESIGNS: - Flat top
SURFACES Basic bollard
+
=
Aluminium nature
RAL-colours
SURFACES
Insert elements Galvanized grain 240
Oxidised
RAL-colours
AS-VP 31/...
Flat top
AS-VP .../1
AS-VP .../2
AS-VP .../3
AS-VP .../4
28
AS-VP 31/1 AS-VP 31/2 AS-VP 31/3 AS-VP 31/4
DESIGN BOLLARDS Basic bollard, square
NEW
Design bollard Vario square AS-VP 41/1 - .../4 TECHNICAL DATA: - Surface: optional - Bollard ': 88 x 88 mm - Height above ground: 900 mm DESIGNS: - Flat top
SURFACES Basic bollard
+
=
Aluminium nature
RAL-colours
SURFACES
Insert elements Galvanized grain 240
Oxidised
RAL-colours
AS-VP 41/...
Flat top
AS-VP .../1
AS-VP .../2
AS-VP .../3
AS-VP .../4
AS-VP 41/1 AS-VP 41/2 AS-VP 41/3 AS-VP 41/4
29
INSERT ELEMENTS SYSTEM Basic bollard, triangular + square 0
2,
R0
,7
R
R2,0
R3,0
74,00
2,0
88,00
2,0
°
60
60
°
121,2
145,5
Insert element
2,00
128,4
2,00
120,4
4,00
4,0
R2,0 R
0
2,
00
Insert element EXX-XXX
Insert element (E) / surface without locking (OV) Insert element (E) / surface with triangular locking (DK)
EOV = insert element (E) for one surface without locking EDK = insert element (E) for one surface with triangular locking
for triangular basic bollards for square bollards
3XX = 1st digit for number of surfaces (3 triangular) 4XX = 1st digit for number of surfaces (4 square)
Material (Corten steel = CS) Material (stainless steel = ES) Material (steel galvanised = SV) also available in RAL
XXX = 2nd/3rd digit for material designations Corten-steel = CS / stainless steel = ES / steel galvanised = SV
Extensions
Erweiterungen EXX-XXX-XX-X
Stainless steel eyelet (EKB), blank Stainless steel rail tube holder (GA)
XX = EKB for stainless steel eyelet, blank XX = GA for stainless steel rail tube holder
Quantity eyelets Quantity rail tube holders
X = Quantity of eyelets or rail tube holders per insert element
Each surface individually designed or all surfaces the same! EVERYTHING IS POSSIBLE WITH VARIO!
30
ACCESSORIES Order-No.
EXX-XXX
Insert element 72.8 x 1.5 x 899.5 mm for AS-VP 41/... (4 surfaces) Insert element 127 x 1.5 x 899.5 mm for AS-VP 31/... (3 surfaces)
EXX-XXX-GA-X
Insert element with tube holder (GA)
EXX-XXX-EKB-X
Insert element (E) with eye (EKB) Stainless steel eye, blank
AS-DL
Expansion bolts (1 pair) for inserting in concrete or natural stone for boring ø 14 mm, M 8 x 100 Length approx. 100 mm
BV-76
Aluminium ground sleeve for resonance-free fastening ø 76 mm Plastic cover and key available.
BD-76
Cover in plastic with extractor key.
DKS
Triangular key (complies with DIN 3223)
GR-XXXX mm (Length)
Rail tube stainless steel, ø 42.4 x 2 mm XXXX = Max. 2000 mm
EAK
Stainless steel chain Cable-ø 5 mm, length 36 mm, Order per M
ESL
Stainless steel shackle, with hexagonal screw for fixing the chain at the post. approx. 23 x 33 mm threaded bolt with hexagon socket
EVG EVK
Stainless steel chain connectors Dimensions approx. 6 x 33 mm Dimensions approx. 4 x 23 mm
ESG ESK
Stainless steel chain connectors threaded Dimensions 7 x 52 mm Dimensions 5 x 39 mm
31
NEW
32
CORTEN-STEEL Corten-steel
MATERIALS SURFACES oxidised
SPEAK TO ALL THE SENSES - BOLLARDS MADE OF CORTEN-STEEL The bollards made of Corten steel fulfil all requirements regarding high-quality street furniture like all other guidance and barrier systems.The bollards made
of Corten steel are available in triangular and square shape. The well-known ground fixings which have been used for many years guarantee maximum flexibility during
installation and assembly of the bollards. The bollards are immediately available ex works and already pre-oxidised.
33
CORTEN-STEEL BOLLARD
' 122 x 122 mm Bollards made of Corten-steel ASC 2/1 - .../4 - A functional, formally independent solution. - Particularly easy-to-handle. - With reliable locking technology. - Individually useable in pedestrian zones and parks.
TECHNICAL DATA: - Surface: oxidised - Bollard ': 122 x 122 mm - Height above ground: 900 mm
INFORMATION Ground fastener - View from above - round - four connection options
DESIGNS: - Flat top
ASC 2/...
Flat top
34
ASc .../1
ASC 2/1
ASc .../2
ASC 2/2
ASc .../3
ASC 2/3
ASc .../4
ASC 2/4
CORTEN-STEEL BOLLARD + 132 mm
INFORMATION
Four „90°“- locking options
Bollards made of Corten-steel ASC 1/1 - .../4 - A functional, formally independent solution. - Particularly easy-to-handle. - With reliable locking technology. - Individually useable in pedestrian zones and parks.
TECHNICAL DATA: - Surface: oxidised - Bollard Δ: 132 mm - Height above ground: 900 mm DESIGNS: - Flat top
ASC 1/...
IMPORTANT! - The exact bollard orientationmust be considered due to the ground fastener! - Please also note the required position of the locking.
Flat top
ASC .../1
ASC 1/1
ASC .../2
ASC 1/2
ASC .../3
ASC 1/3
ASc .../4
ASC 1/4
35
36
ORNAMENTAL BOLLARDS steel
aluminium plastic
MATERIALS SURFACES RAL 7021 galvanized nature
RAL Colours
Ornamental bollards from the range are: - representative in design - well made - corrosion free for longer life and durable in the surface - maintenance free, with reliable
technology ornamental bollards fulfill all tasks of the communal, commercial and private demand. The quality Our products are made of high-quality materials. We only use treated steel, aluminium or coloured plastics. All articles have been designed to be resilient and highly durable due to its solid structure. It goes without saying that assembly is uncomplicated, maintenance is not necessary and the use of the quality programme is easy.
Tube dimensions The round bollards are made of tubes with an outer diameter of 60, 76, 102 or 195 mm. The conic models have got the outer dimensions of 133/75 and 100/5. The square models have got an outer dimension of 70 x 70 mm or 100 x 100 mm. The steel version has got a wall strength of 2.3 3.6 mm, the aluminium bollards 2.75 3.0 mm. Surfaces As standard our ornamental bollards are made of steel with hot-galvanised surface and powder coated (RAL 7021), or made of aluminium which is also powder coated (RAL 7021). Special colours on request. Each RAL colour is possible.
The accessories We offer a wide and functional range of accessories for all standard models leading to a further individualization or to increasing benefits of the offered models. Special Designs You have got special requirements and cannot find the right products in our catalogue? Please don‘t hesitate to contact us and we will make you a special offer with the aid of our comprehensive design and technological expertise.
37
Ornamental Bollard, steel ø 60 mm AS 79/1 - .../4 AS 78/1 - .../4 - Smooth version. - Especially robust construction - Especially suitable for use in representative urban areas, parks and recreation areas. - Lockable with triangular key according to DIN 3223 or profile cylinder. - Fastening with plugs or concrete-in version or with ground sleeve.
Ornamental Bollard, steel ø 76 mm AS 26/1 - .../4 AS 96/1 - .../4 - Useable as bollard and design element at the same time. - Robust tubular support elements with additional benefits. - Bicycles etc. can also be attached. - Lockable with triangular key according to DIN 3223 or profile cylinder. - Fastening with plugs or concrete-in version or with ground sleeve. - Resonance free due to ground sleeve.
TECHNICAL DATA: - Bollard ø: 60 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
TECHNICAL DATA: - Bollard ø: 76 mm - Tubular support ø: 25 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
DESIGNS: - Helmet top / Flat top
DESIGNS: - Flat top / Round top
AS 78/...
AS 26/...
Helmet top
Flat top
Flat top
Round top
AS .../1
AS 79/1
AS 78/1
AS 26/1
AS 96/1
AS .../2
AS 79/2
AS 78/2
AS 26/2
AS 96/2
AS .../3
AS 79/3
AS 78/3
AS 26/3
AS 96/3
AS .../4
AS 79/4
AS 78/4
AS 26/4
AS 96/4
AS .../5
---
---
---
---
AS .../8
---
---
---
---
AS .../9
---
---
---
---
AS .../89
---
---
---
---
AS 79/...
38
AS 96/...
AS 3/...
Ornamental Bollard, aluminium ø 76 mm AS 3/1 - .../89 AS 54/1 - .../89 AS 53/1 - .../89 AS 55/1 - .../89 AS 57/1 - .../89 AS 56/1 - .../89 - Self-righting or with „easy break“ function. - For use in critical areas with the possibility of high damage.
Ornamental Bollard, steel ø 76 mm AS 4/1 - .../89 AS 9/1 - .../89 AS 24/1 - .../89 AS 27/1 - .../89 AS 34/1 - .../89 AS 67/1 - .../89 - Self-righting or with „easy break“ function. - For use in critical areas with the possibility of high damage.
TECHNICAL DATA: - Bollard ø: 76 mm - Height above ground: 900 mm + top - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Bollard ø: 76 mm - Height above ground: 900 mm + top - Baseplate: Ground fixing .../3 = 200 x 200 mm BGround fixing .../5 = 200 x 100 mm
DESIGNS: - Helmet top/ round top / ball, compressed top - Ball cone / Solid Ball / Flat top
DESIGNS: - Helmet top / Ball, compressed top / round top - Ball cone / Flat top /Solid Ball
AS 54/...
Helmet top Round top
AS 53/...
AS 55/...
AS 57/...
ball, comBall cone top Solid ball top pressed top
AS 56/...
Flat top
AS 4/...
AS 9/...
Helmet top Round top
AS 24/...
AS 27/...
AS 34/...
ball, comBall cone top Solid ball top pressed top
AS 67/...
Flat top
AS 3/1
AS 54/1
AS 53/1
AS 55/1
AS 57/1
AS 56/1
AS 4/1
AS 9/1
AS 24/1
AS 27/1
AS 34/1
AS 67/1
AS 3/2
AS 54/2
AS 53/2
AS 55/2
AS 57/2
AS 56/2
AS 4/2
AS 9/2
AS 24/2
AS 27/2
AS 34/2
AS 67/2
AS 3/3
AS 54/3
AS 53/3
AS 55/3
AS 57/3
AS 56/3
AS 4/3
AS 9/3
AS 24/3
AS 27/3
AS 34/3
AS 67/3
AS 3/4
AS 54/4
AS 53/4
AS 55/4
AS 57/4
AS 56/4
AS 4/4
AS 9/4
AS 24/4
AS 27/4
AS 34/4
AS 67/4
AS 3/5
AS 54/5
AS 53/5
AS 55/5
AS 57/5
AS 56/5
AS 4/5
AS 9/5
AS 24/5
AS 27/5
AS 34/5
AS 67/5
AS 3/8
AS 54/8
AS 53/8
AS 55/8
AS 57/8
AS 56/8
AS 4/8
AS 9/8
AS 24/8
AS 27/8
AS 34/8
AS 67/8
AS 3/9
AS 54/9
AS 53/9
AS 55/9
AS 57/9
AS 56/9
AS 4/9
AS 9/9
AS 24/9
AS 27/9
AS 34/9
AS 67/9
AS 3/89
AS 54/89
AS 53/89
AS 55/89
AS 57/89
AS 56/89
AS 4/89
AS 9/89
AS 24/89
AS 27/89
AS 34/89
AS 67/89
39
Ornamental Bollard, aluminium ø 102 mm AS 45/1 - .../89 AS 25/1 - .../89 AS 5/1 - .../89 AS 95/1 - .../89 - For the protection of pedestrian areas and parks in representative areas.
Ornamental Bollard, steel ø 102 mm AS 46/1 - .../89 AS 74/1 - .../89 AS 6/1 - .../89 AS 86/1 - .../89 - For the protection of pedestrian areas and parks in representative areas. - Concrete-in version, or fixing with dowels or ground sleeve. - „Anti-vibration“ ground sleeve.
TECHNICAL DATA: - Bollard ø: 102 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
TECHNICAL DATA: - Bollard ø: 102 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
DESIGNS: - Helmet top / Stepped flat top
DESIGNS: - Helmet top / Stepped flat top
AS 45/...
AS 25/...
AS 5/...
AS 95/...
Helmet top
Stepped flat Helmet top/ Stepped flat top/Rings top Rings
AS 46/...
Helmet top
AS 74/...
AS 6/...
AS 86/...
Stepped flat Helmet top/ Stepped flat top/Rings top Ringe
AS .../1
AS 45/1
AS 25/1
AS 5/1
AS 95/1
AS 46/1
AS 74/1
AS 6/1
AS 86/1
AS .../2
AS 45/2
AS 25/2
AS 5/2
AS 95/2
AS 46/2
AS 74/2
AS 6/2
AS 86/2
AS .../3
AS 45/3
AS 25/3
AS 5/3
AS 95/3
AS 46/3
AS 74/3
AS 6/3
AS 86/3
AS .../4
AS 45/4
AS 25/4
AS 5/4
AS 95/4
AS 46/4
AS 74/4
AS 6/4
AS 86/4
AS .../5
---
---
---
---
---
---
---
---
AS .../8
AS 45/8
AS 25/8
AS 5/8
AS 95/8
AS 46/8
AS 74/8
AS 6/8
AS 86/8
AS .../9
AS 45/9
AS 25/9
AS 5/9
AS 95/9
AS 46/9
AS 74/9
AS 6/9
AS 86/9
AS .../89
AS 45/89
AS 25/89
AS 5/89
AS 95/89
AS 46/89
AS 74/89
AS 6/89
AS 86/89
40
Ornamental tube system AS 21/1 - .../4 AS 22/1 - .../4 AS 23/1 - .../4 - Individual coordination of colours. (RAL colours) - Eyes not possible as accessories!
Ornamental Bollard made of special material AS 7/1- .../4 - Representative version. - High-quality weather-proof material. - For the safe protection in representative urban areas. - only available in RAL 7021
TECHNICAL DATA: - Bollard ø: 76 mm - Tubular support ø: 26 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm DESIGNS: - Ball on tube system / ball in tube system - Tube system
AS 21/...
Ball on tube system
AS 22/...
AS 23/...
Ball in tube Tube system system
TECHNICAL DATA: - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
AS 7/...
Helmet top
AS 21/1
AS 22/1
AS 23/1
AS 7/1
AS 21/2
AS 22/2
AS 23/2
AS 7/2
AS 21/3
AS 22/3
AS 23/3
AS 7/3
AS 21/4
AS 22/4
AS 23/4
AS 7/4
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
41
ALUMINIUM
ORNAMENTAL BOLLARDS ø 133/75 mm
Ornamental Bollard, aluminium ø 133/75 mm, conic AS 28/1 - .../4 - Sturdy, traditional style. - For the use in all urban areas and parks. - Lockable with triangular lock according to DIN 3223 or profile cylinder(only AS 28/4). - Concrete-in version or fixing with dowels or ground sleeve. - „Anti-vibration“ ground sleeve.
TECHNICAL DATA: - Bollard ø: 133/75 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm DESIGNS: - Helmet top, tube conic
AS 28/...
Helmet top
42
AS .../1
AS 28/1
AS .../2
AS 28/2
AS .../3
AS 28/3
AS .../4
AS 28/4
STEEL
ORNAMENTAL BOLLARDS ø 102/75 mm
Ornamental Bollard, steel ø 102/75 mm, conic AS 8/1 - .../4 AS 18/1 - .../4 - Representative design - For the safe protection in repre- sentative urban areas, parks and gardens. - Lockable with triangular lock according to DIN 3223 or profile cylinder (only AS 8/4). - Concrete-in version or fixing with dowels or ground sleeve. - „Anti-vibration“ ground sleeve.
TECHNICAL DATA: - Bollard ø: 102/75 mm, konisch - Height above ground: 9 00 mm + top - Baseplate: 200 x 200 mm DESIGNS: - Helmet top, tube conic - Helmet top, tube conic, compressed
AS 8/...
AS 18/...
Helmet top
Helmet top compressed
AS .../1
AS 8/1
AS 18/1
AS .../2
AS 8/2
AS 18/2
AS .../3
AS 8/3
AS 18/3
AS .../4
AS 8/4
AS 18/4
43
Ornamental Bollard, steel ø 195 mm AS 19/1- .../3 ASS 19/1- .../3 - Very robust design. - For the safe protection in representative urban areas, parks and recreation areas. - Concrete-in version, or dowels.
NEW
Ornamental Bollard, steel '100 x 100 mm AS 102/1 - .../3 - Impressing representative type. - For the safe protection of representative areas. - Concrete-in version or dowels - Clear design.
TECHNICAL DATA: - Bollards ø: 195 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
TECHNICAL DATA: - Bollard': 100 x 100 mm - Height above ground: 900 mm + top - Baseplate: 200 x 200 mm
DESIGNS: - Helmet top - Seat
DESIGNS: - Flat top
ASS 19/...
AS 102/...
Helmet top
Seat
Flat top
AS .../1
AS 19/1
ASS 19/1
AS 102/1
AS .../2
---
---
---
AS .../3
AS 19/3
ASS 19/3
AS 102/3
AS .../4
---
---
---
AS .../5
---
---
---
AS 19/...
44
Ornamental Bollard, aluminium '70 x 70 mm AS 82/1 - .../5 AS 92/1 - .../5 - Robust square design. - For the protection of traffic routes, parking lots etc.
Ornamental Bollard, Steel '70 x 70 mm AS 2/1 - .../5 AS 72/1 - .../5 - Robust square design in neutral version. - Individual for nearly all barrier purposes.
TECHNICAL DATA: - Bollard': 70 x 70 mm - Height above ground: 900 mm + top - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Bollard ': 70 x 70 mm - Height above ground: 900 mm + top - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
DESIGNS: - Helmet top - Flat top
DESIGNS: - Helmet top - Flat top
AS 82/...
AS 2/...
AS 92/...
AS 72/...
Helmet top
Flat top
Helmet top
Flat top
AS 82/1
AS 92/1
AS 2/1
AS 72/1
AS 82/2
AS 92/2
AS 2/2
AS 72/2
AS 82/3
AS 92/3
AS 2/3
AS 72/3
AS 82/4
AS 92/4
AS 2/4
AS 72/4
AS 82/5
AS 92/5
AS 2/5
AS 72/5
45
STEEL
TREE PROTECTOR d Tree protector and trellis RG 1, RGL 1, BG 1, BGL 1 - Design low-carbon steel - Ornamental style - Universally applicable as plant protection and trellis. - Mounting with quadruple screw connection.
Tree protector and trellis RG 2, RGL 2, BG 2, BGL 2 - Design low-carbon steel - Ornamental style - Universally applicable as plant protection and trellis. - Mounting with quadruple screw connection.
Trellis RG 1, RGL 1 One-piece for fastening at building facades. Screws not included with delivery. Tree protector BG 1, BGL 1 Two-piece, fits all commonly used tree grids. Special screws for height adjustment included with delivery.
Trellis RG 2, RGL 2 One-piece for fastening at building facades. Screws not included with delivery. Tree protector BG 2, BGL 2 Two-piece, fits all commonly used tree grids. Special screws for height adjustment included with delivery.
D
L
L
d
With additional reinforcements at the bottom. Creates for this size the required stability and safety.
D
TECHNICAL DATA: RG 1, RGL 1, BG 1, BGL 1 D = 900 mm d = 375 mm L = 1750 mm
TECHNICAL DATA: RG 2, RGL 2, BG 2, BGL 2 D = 1250 mm d = 500 mm L = 1750 mm
Low-carbon steel, hot galvanised
Low-carbon steel, powder coated
RG 1
RGL 1
BG 1
BGL 1
RG 2
RGL 2
BG 2
BGL 2
Low-carLow-carbon bon steel, steel, powder hot galvanised coated
Note: Due to the manufacturing process tolerances regarding the products from +/- 10mm have to be considered.
46
d Tree protector and trellis RG 5, RGL 5, BG 5, BGL 5 - Flat steel construction. - Solid ornamental style - Universally applicable as plant protection and trellis. - Mounting with quadruple screw connection.
Tree protector and trellis RG 6, RGL 6, BG 6, BGL 6 - Flat steel construction. - Solid ornamental style - Universally applicable as plant protection and trellis. - Mounting with quadruple screw connection.
Trellis RG 5, RGL 5 One-piece for fastening at building facades. Screws not included with delivery. Trellis BG 5, BGL 5 Two-piece, fits for all commonly used tree grids. Special screws for height adjustment included with delivery.
Trellis RG 6, RGL 6 Einteilig fĂźr Befestigung an Hausfassaden. Schrauben im Lieferumfang nicht enthalten. Trellis BG 6, BGL 6 Two-piece, fits for all commonly used tree grids. Special screws for height adjustment included with delivery.
D
L
L
d
D
With additional reinforcements at the bottom. Creates for this size the required stability and safety.
TECHNICAL DATA: RG 5, RGL 5, BG 5, BGL 5 D = 900 mm d = 375 mm L = 1750 mm
TECHNICAL DATA: RG 6, RGL 6, BG 6, BGL 6 D = 1 250 mm d = 500 mm L = 1750 mm
Flat steel
Flat steel, powder coated
Flat steel
Flat steel, powder coated
RG 5
RGL 5
BG 5
BGL 5
RG 6
RGL 6
BG 6
BGL 6
Note: Due to the manufacturing process tolerances regarding the products from +/- 10mm have to be considered.
47
ACCESSORIES Order-No.
KSK
5 mm galvanised chain, length 35 mm
KSK RAL 7021 KSD RAL 7021
5 mm galvanised chain and RAL 7021 painted, length 35 mm
KSD
8 mm galvanised chain, length 52
KSK RAL 7021 KSD RAL 7021
8 mm galvanised chain and RAL 7021 painted, length 52 mm
ASK
Chain attachment Pos. B for bollards round and squared, incl. cylinder lock Pos. D. 3 keys included with delivery
HA-1
HOE
Position at the post:
° 90
We don‘t recommend eyes for tiltable bollards.
B Eye
A
50 mm
C
ilting direction is always
B
D
130150 mm
Position of the triangular lock and/or of the profile cylinder
D
RAE RAR RAS
48
Chain eye and chain hook made of galvanised steel Available: Hook, not fitted Eye not fitted Hook/Eye fitted: Please mention position with your order
B
D
C
For triangular and/or profile cylinder: Eye under cylinder
Reflectable tape, 50 mm wide silver grey, red, black
ACCESSORIES Order-No.
VZG VZK
Galvanised steel connectors Dimensions approx. 7 x 33 mm Dimensions approx. 5 x 23 mm
VSG VKG
Galvanised steel connectors, threaded Dimensions 7 x 52 mm Dimensions 5 x 39 mm
AS-DL
Expansion bolts (1 pair) for inserting in concrete or natural stone for boring ø 14 mm, M 8 x 100 Length approx. 100 mm
AS-KP
Baseplate concrete-in version for all tiltable bollards Baseplate approx. 200 x 100 mm Shaft length approx. 360 mm, incl. M12 Nirosta-screws
BV-60 BV-76 BV-102 BV-70
Aluminium ground sleeve for resonance-free fastening ø 61 mm ø 76 mm ø 102 mm ' 70 x 70 mm
BD-60 BD-76 BD-102 BD-70 für DK
Cover in plastic with extractor key. For BD-70 the triangular key DKS is required (not included with delivery)
DKS
Triangular key (complies with DIN 3223)
AS-UB
U-bolt for all tiltable bollards, M 12 thread incl. U-washers and nuts. For all bollards with baseplate 200 x 100 mm.
CM CI SP8
Key for master lock Key for profile cylinder simultaneous locking Key for 9 mm PZ-triangular lock
49
50
FUNCTIONAL BOLLARDS Steel
aluminium Plastic
MATERIALS SURFACES galvanized nature
white/red yellow/ black
RAL Colours
With the functional equipment, bollards are becoming more important. Functional bollards are: - Representative in design - Well made - Corrosion free for longer life and durable in the surface - Maintenance free, with reliable technology Our bollards fulfill all requirements of the communal, commercial and private demands. The quality Our functional bollards are made of high-quality materials. We use coated steel, aluminium or coloured plastics. With their solid
design, all articles are developed with the highest quality and durability in mind. They are simple to fit and maintenance free. Furthermore they are easy to handle. This is important for the quality programme. Tube Dimensions The round bollards are made of tubes with 61 mm, 76 mm or 102 mm outer diameter. The square models have an outer dimension of 70 x 70 mm. The steel version has a wall strength of 2.3-3.6 mm, aluminium bollards 2.0-3.0 mm.
Surfaces As standard our products are supplied with hot-galvanised surface or in aluminium nature. Alternatively functional bollards from the range are also available in the surfaces white/red or yellow/ black.
51
Bollard , plastic ø 60 mm SP 2/1 - .../3 Sp 3/1 - .../3 - High-strength plastic, dyed through in white. - Resistant against atmospheric influences. - Fixed to the ground with anchor fixings, ground sleeve or dowels. - Warning effect due to reflecting foil. - Also available with chain top.
Mobile bollards, plastic ø 48 mm AS 60/1 - .../4 AS 90/1 - .../4 - Easy handling, free standing. - Suitable for closing off areas inside and outside. - High stability by large sized plastic foot. - Weather-resistant material.
TECHNICAL DATA: - Post ø: 60 mm - Height above ground: 900 mm - Baseplate: 200 x 200 mm
TECHNICAL DATA: - Post ø: 48 mm - Height above ground: 900 mm
AS 60/...
rot/weiß
AS 60/...
rot/weiß
AS 60/...
schwarz/gelb schwarz/gelb m. Gewicht
m. Gewicht
0,8 kg
3,5 kg
0,8 kg
3,5 kg
AS 60/1 RW
AS 60/3 RW
AS 60/2 SG
AS 60/4 SG
AS 90/...
AS 90/...
AS 90/...
AS 90/...
rot/weiß
rot/weiß
SP 2/...
SP 3/...
Pointed head
Chain top rot/weiß
.../1
SP 2/1
SP 3/1
.../2
SP 2/2
SP 3/2
.../3
SP 2/3
SP 3/3
schwarz/gelb schwarz/gelb m. Gewicht
m. Gewicht
52
AS 60/...
1,2 kg
9,0 kg
1,2 kg
9,0 kg
AS 90/1 RW
AS 90/3 RW
AS 90/2
AS 90/4
SG
SG
Parking post, plastic AS P 60 - In combination with plastic posts a reliable mobile barrier. - Reflective cat eyes - Fastening with dowels or simply by placing on the ground. - To increase stability, filling is possible. Parking post with bollard AS 620 + AS 630 - The reliable barrier of car parks. - The special design prevents damage by unintentional impact. - Also suitable for chain attachments. - Fastening with dowels or simply by placing on the ground. - To increase stability, filling is possible.
TECHNICAL DATA: - Parking post ø: 215 mm - Parking post height: 200 mm - Bollard ø: 60 mm - Height above ground: 900 mm (combined)
Kerb, plastic AS LBW 45 AS LBG 45 AS LBW 90 AS LBG 90 - Provides clear parking organization: - Parking reservation by individual mar- king with the help of adhesive films (see accessories). - Approach marking to prevent damage to the vehicle. - Solid version made of weather resistant plastics which can withstand high static load. - Signal effect due to two reflecting cat eyes on the fronts. - Appropriate mounting material please find under accessories.
TECHNICAL DATA: - Width: 100 mm - Height: 90 mm - Colours available: white, yellow
Parking post
Pointed head
Chain top
AS PL 60
AS PL 630 AS PL 620
AS P 60
AS P 630
AS P 620
unbefüllt
befüllt
yellow
white
AS LBG
AS LBW
45
45
AS LBG
AS LBW
90
90
53
Drive-in bollard, steel ø 32 mm AS 64/1 Steel bollard, galvanised, or hot-galvanised and painted. - To drive in. - Elegant, slim design. - For chain barriers in parks, gardens etc.
Bollard, Steel ø 48 mm AS 65/1 - .../3 with attachment clips Steel bollard, galvanised, or hot-galvanised and painted. - Warning effect due to reflective foil. - As standard with attachment clips. - High stability. - Concrete-in version or surface fixing. - Warning effect due to reflective foil.
AS 64/2 - Concrete-in version. - Foot with anchoring.
TECHNICAL DATA: - With 2 chain-eyes. - Bollard ø: 48 mm - Height above ground: 900 mm - Baseplate: 200 x 200 mm
TECHNICAL DATA: - With 2 chain-eyes. - Bollard ø: 32 mm - Total length: 1160 mm
AS 65/...
AS 64/... Eye connectors
Drive-in bollard
54
.../1
AS 65/1
.../1
AS 64/1 to drive in
.../2
---
.../2
AS 64/2
.../3
AS 65/3
Bollard, steel ø 60 mm AS 16/1 - .../4 AS 1630/1 - .../4 AS 1620/1 - .../4 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil.
Bollard, Steel ø 76 mm AS 14/1 - .../89 AS 1430/1 - .../89 AS 1420/1 - .../89 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil. Safety Bollard, steel ø 76 mm with „easy break“ function AS 14/9 - Quick mounting and dismounting by means of 3 screws at the baseplate. - Fixing by dowels and hexagon socket screw.
TECHNICAL DATA: - Post ø: 76 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Post ø: 60 mm - Height above ground: 900 mm - Baseplate: 200 x 200 mm
AS 14/...
AS 1430/...
Pointed head Chain top
AS 16/...
AS 1630/...
Pointed head Chain top
AS 1420/...
Flat top
AS .../1
AS 14/1
AS 1430/1
AS 1420/1
AS .../2
AS 14/2
AS 1430/2
AS 1420/2
AS .../3
AS 14/3
AS 1430/3
AS 1420/3
AS .../4
AS 14/4
AS 1430/4
AS 1420/4
AS 1620/...
Flat top
AS .../1
AS 16/1
AS 1630/1
AS 1620/1
AS .../5
AS 14/5
AS 1430/5
---
AS .../2
AS 16/2
AS 1630/2
AS 1620/2
AS .../8
AS 14/8
AS 1430/8
AS 1420/8
AS .../3
AS 16/3
AS 1630/3
AS 1620/3
AS .../9
AS 14/9
AS 1430/9
AS 1420/9
AS .../4
AS 16/4
AS 1630/4
AS 1620/4
AS .../89
AS 14/89
AS 1430/89
AS 1420/89
55
Bollards, steel ' 70 x 70 mm AS 12/1 - .../5 AS 1220/1 - .../4 AS 120 As 1220 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil. - Tiltable - Warning effect due to reflecting foil. - Optionally available with flat top. - Concerning model designation AS .../5, the flat top is always made of aluminium.
Bollards, steel ø 102 mm AS 10/1 - .../89 AS 1020/1 - .../89 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil.
TECHNICAL DATA: - Post ø: 70 x 70 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Post ø: 102 mm - Height above ground: 900 mm - Baseplate: 200 x 200 mm
AS 10/...
AS 1020/...
AS 12/...
AS 1220/...
Pointed head
Flat top
Pointed head
Flat top
Pointed head
AS .../1
AS 10/1
AS1020/1
AS 12/1
AS 1220/1
---
AS .../2
AS 10/2
AS1020/2
AS 12/2
AS 1220/2
---
AS .../3
AS 10/3
AS1020/3
AS 12/3
AS 1220/3
---
AS .../4
AS 10/4
AS1020/4
AS 12/4
AS 1220/4
---
AS .../5
---
---
AS 12/5
---
---
AS ...
---
---
---
---
AS 120
AS .../8
AS 10/8
AS1020/8
AS .../9
AS 10/9
AS1020/9
AS .../89
AS 10/89
AS1020/89
56
AS 120
Bollard, steel ' 70 x 70 mm, tiltable AS 15/1 + AS 15/5 AS 1520/1 + AS 1520/5 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil. - To restrict access to certain areas and car parks. - Lockable by padlock (not included with delivery). - Fixing on concreted-in baseplate or dowels.
Barrier, steel ' 70 x 70 mm AS 71/1 - .../5 AS 7120/1 - .../5 Steel bollard, galvanised, or galvanised and painted. Warning effect due to reflective foil. - Stops the passage or the passage in parallel arrangement. - Optionally available with flat top. - Concerning model designation AS .../5, the flat top is always made of aluminium.
TECHNICAL DATA: - Post ø: 70 x 70 mm - Height above ground: 900 mm - Height when post is tilted: 95 mm - Ground fixing: 200 x 100 mm
TECHNICAL DATA: - Post ø: 70 x 70 mm - Height above ground: 900 mm - Width: 770 mm - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
AS 15/...
AS 1520/...
AS 71/...
AS 7120/...
Pointed head
Flat top
Pointed head
Flat top
AS 15/1
AS 1520/1
AS 71/1
AS 7120/1
---
---
AS 71/2
AS 7120/2
---
---
AS 71/3
AS 7120/3
---
---
AS 71/4
AS 7120/4
AS 15/5
AS 1520/5
AS 71/5
AS 71/5
---
---
---
---
---
---
---
---
---
---
57
Bollard, aluminium ø 60 mm AS 63/1 - .../4 AS 62/1 - .../4 Bollard, aluminium, powder coated. - Available with top or chain top. - Warning effect due to reflecting foil. - Baseplate: 150 x 150 mm
Bollard, aluminium ø 76 mm AS 1 - AS 89 Bollard, aluminium, powder coated. - Warning effect due to reflecting foil. - Available with cone top or chain top
Bollard, aluminium ø 60 mm AS 17/1 - .../4 AS 1730/1 - .../4 Bollard, aluminium, powder coated. - Available with top or chain top. - Warning effect due to reflecting foil. - Baseplate: 200 x 200 mm
TECHNICAL DATA: - Post ø: 76 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
TECHNICAL DATA: - Post ø: 60 mm - Height above ground: 900 mm
AS 62/... RW
AS 63/... SG
AS 62/... SG
AS 17/...
Pointed head
Chain top
Pointed head
Chain top
Pointed head
Chain top
Pointed head
AS 63/1
AS 62/1
AS 63/1
AS 62/1
RW
RW
SG
SG
AS 17/1
AS 1730/1
AS 1
AS 63/2
AS 62/2
AS 63/2
AS 62/2
RW
RW
SG
SG
AS 17/2
AS 1730/2
AS 2
AS 63/3
AS 62/3
AS 63/3
AS 62/3
RW
RW
SG
SG
AS 17/3
AS 1730/3
AS 3
AS 63/4
AS 62/4
AS 63/4
AS 62/4
RW
RW
SG
SG
AS 17/4
AS 1730/4
AS 4
AS .../5
---
---
---
---
---
---
AS 5
AS .../8
---
---
---
---
---
---
AS 8
AS .../9
---
---
---
---
---
---
AS 9
AS .../89
---
---
---
---
---
---
AS 89
AS 63/... RW
AS .../1
AS .../2
AS .../3
AS .../4
58
AS 1730/...
AS ...
AS ... RW
AS ... SG
Pointed head
Pointed head
AS 1
AS 1
RW
SG
AS 2
AS 2
RW
SG
AS 3
AS 3
RW
SG
AS 4
AS 4
RW
SG
AS 5
AS 5
RW
SG
AS 8
AS 8
RW
SG
AS 9
AS 9
RW
SG
AS 89
AS 89
RW
SG
Bollard, aluminium' 70 x 70 mm AS 13/1 - .../5 Bollard, aluminium, nature or powder coated. - Tiltable - Warning effect due to reflecting foil.
TECHNICAL DATA: - Post ': 70 x 70 mm - Height above ground: 900 mm - Baseplate: Ground fixing .../3 = 200 x 200 mm Ground fixing .../5 = 200 x 100 mm
AS ...
Bollard, aluminium ø 102 mm AS 11/1 - .../89 Bollard, aluminium, nature or powder coated. - Warning effect due to reflecting foil.
TECHNICAL DATA: - Post ø: 102 mm - Height above ground: 900 mm - Baseplate: 200 x 200 mm
AS ... RW
AS ... SG
Pointed head
Pointed head
AS 13/1
AS 13/1
RW
SG
AS 13/2
AS 13/2
RW
SG
AS 13/3
AS 13/3
RW
SG
AS 13/4
AS 13/4
RW
SG
AS 13/5
AS 13/5
RW
SG
---
---
---
AS 11/8
---
---
---
AS 11/9
---
---
---
AS 11/89
Pointed head
AS 13/1
AS 13/2
AS 13/3
AS 13/4
AS 13/5
AS ...
Pointed head
AS 11/1
AS 11/2
AS 11/3
AS 11/4
---
AS ... RW
AS ... SG
Pointed head
Pointed head
AS 11/1
AS 11/1
RW
SG
AS 11/2
AS 11/2
RW
SG
AS 11/3
AS 11/3
RW
SG
AS 11/4
AS 11/4
RW
SG
---
---
AS 11/8
AS 11/8
RW
SG
AS 11/9
AS 11/9
RW
SG
AS 11/89
AS 11/89
RW
SG
59
ALUMINIUM
SAFETY BOLLARD ø 76 mm
Safety Bollard, aluminium ø 76 mm AS 6 Bollard with locking, tiltable, with lifting mechanism The post is pressed down with the foot and is tensioned. By lightly pressing the release mechanism, the post erects and locks automatically. Baseplate made of robust special cast-iron construction, 200 x 100 mm. Distance between holes 160 mm.
TECHNICAL DATA: - Post ø: 76 mm - Height above ground: 900 mm
AS 6
AS 6 SG
Pointed
Pointed
Pointed
head
head
head
AS 6
AS 6
RW
SG
AS 6
60
AS 6 RW
ALUMINIUM BOLLARDS
' 70 x 70 mm Bollard, aluminium ' 70 x 70 mm retractable AS 530 - Ideal for protecting driveways and parking spaces. - Particularly secure and comfortable version. - Passable cover which is flush to the ground. - Post automatically locks when fully extended. - Optionally locking in retractable condition is possible. - Fixing by setting in concrete. - Warning effect due to two-colored powder coating.
TECHNICAL DATA: - Posts ø: 70 x 70 mm - Height above ground: 900 mm - Length below ground: 1160 mm - Ground sleeve: Aluminium
Lockable in retracted condition!
Flat top mit Hebering
Flat top mit Hebering
AS 53/0
AS 53/0
RW
RW
61
ALUMINIUM & STEEL DOUBLE-ARM BOLLARD 70 x 70 mm
Double-arm bollard made of aluminium and hot-galvanised steel '70 x 70 mm AS-DA/3 - .../22 Only one post for 2 parking lots. - With heavy galvanized support and aluminium arms swinging to the side. - Arms individually lockable with profile cylinder. - Arms lock automatically in closed and opened position. - Also available with single arm. - Warning effect due to reflecting foil.
TECHNICAL DATA: - Post ø: 70 x 70 mm - Height above floor opened: 1900 mm - Height above floor closed: 900 mm - Width: 2200 mm
Pointed head
62
AS DA .../3
AS DA
AS DA .../22
AS DA
Tree barriers, steel ø 60 mm BSB Protects trees and green plants against parking vehicles. - For a wide range of use in traffic areas, on car parks etc. - For setting in concrete.
Tree holder, steel BST 02 - 04 - With screwable cover. - For Christmas trees, maypoles etc. - For setting in concrete. - Grooved cover plate, flush to the floor. .
TECHNICAL DATA: - Tube ø: 60 mm - Height above ground: 900 mm - Total height: 1500 mm - Width: 800 mm
TECHNICAL DATA: - Order no. - Inside ø - Depth BST-02 210 mm 750 mm BST-03 310 mm 950 mm BST-04 400 mm 1200 mm
Flat top
BST-02
Bogen
BSB
BST-03
BST-04
63
ACCESSORIES Order-No.
KSS KSK KSR
Steel Chain, wire- ø 5 mm, length 36 mm, order per meter yellow-black galvanized red-white
SKG SKR
Plastic chain, wire-ø 6 mm, length 35 mm, order per meter yellow-black red-white
AS-NR AS-NW AS-NS
Chain Fasteners Plastic red Plastic white Plastic black
ASK
Chain lock Pos. B for bollards round and square, incl. profile cylinder Pos. D. 3 keys included with delivery.
HA-1 HOE
Hook and Eye Connectors, fitted from inside. Available: Hook, unfitted Eyes unfitted
We don‘t recommend eyes for tiltable bollards.
Position at the post: ° 90
B Eye
A
50 mm
C
D
130150 mm
Position of the triangular lock and/or of the profile cylinder
D
64
ilting direction is always
B B
D
C
For triangular and/or profile cylinder: Eye under cylinder
VZG VZK
Steel chain connectors, galvanized Dimensions approx. 7 x 33 mm Dimensions approx. 5 x 23 mm
VSG VKG
Steel chain connectors, galvanized, threaded Dimensions 7 x 52 mm Dimensions 5 x 39 mm
ACCESSORIES Order-No.
PZ + PZ Double profile cylinder lock on request. Europrofile cylinder with key-lock at 0° on request RAE RAR RAS
Reflectable tape, width: 50 mm sliver grey, red, black
AS-DL
Expansion bolts (1 pair) for inserting in concrete or natural stone, M 8 x 100 Length approx. 100 mm
AS-KP
Baseplate setting in concrete for all tiltable bollards Base plate approx. 200 x 100 mm Shaft length approx. 360 mm incl. M12 Nirosta-screws
AS-UB
U-bolt for all tiltable bollards, M 12 thread incl. U-washers and nuts. For all bollards with baseplate 200 x 100 mm.
BV-60 BV-76 BV-102 BV-70
Aluminium ground sleeve for resonance-free fastening ø 61 mm ø 76 mm ø 102 mm ' 70 mm Cover and key in plastic available.
BD-60 BD-76 BD-102 BD-70 für DK
Cover in plastic with extractor key. For BD-70 the triangular key DKS is required (not included with delivery)
CM CI SP8
Key for master lock Key for profile cylinder simultaneous locking Key for 9 mm PZ-triangular lock
DKS
Triangular key (complies with DIN 3223)
available for AS-LB, „P“ white on blue (RAL 5017) 70 x 70 mm
AS-LB 90
AS-LB 45
RESERVED
840 350
840 360
Customer
840 351
840 361
Visitor
840 352
840 362
SD-MW 1234
840 353
840 363
with license plate
DR. JOHN DOE
840 354
840 364
with name (max. 16 letters)
840 355
840 365
without marking
Note: Description field for AS-LB 90 570 x 70 mm, for AS-LB 45, 350 x 70 mm
65
66
Barrier Steel
aluminium stainless steel
MATERIALS SURFACES galvanized nature
Grain 240 blasted
Polished white/red RAL 9006 RAL Colours glass-bead blasted
Our barriers are: - Elegant in design - Well made - Simple and easy to handle - Ideal for narrow spaces - CAD-optimised - Corrosion free for longer life and durable in the surface - Maintenance free, with reliable technology
Quality Our products are made of high-quality materials. We only use surface-treated steel. With their solid design, all articles are developed with the highest quality and durability in mind. They are simple to fit and maintenance free. Furthermore they are easy to handle. This is important for the quality programme.
Our barriers fulfill all requirements of the communal, commercial and private demands.
Tube Dimensions Our barriers are made of tubes with 26, 40, 54 or 61 mm outer dimension. The square models have
an outer dimension of 50 x 80 or 70 x 70 mm. Height of the barriers 0.50 0.90 m above ground. Surfaces As standard our products are supplied in hot galvanized surface. Alternatively barrier elements are also available of the type FLEXY, also with the surfaces white/red.
67
Barrier AS 505/AS 510 - Tyre preserving due to round shapes and use of highly resistant plastic hinges. - Warning effect due to reflective foil.
Barrier TUB 1000 - Thief-resistant fixing, complete accessories, as standard incl. safety nuts
TECHNICAL DATA: - Posts ø: 60/40 mm - Total width: 760 mm - Drive-over height: ca. 75 mm - Height above ground: AS 505 500 mm AS 510 900 mm
TECHNICAL DATA: - Post ø: 54 mm - Height above ground: 455 mm - Drive-over height: approx. 80 mm - Width: 850 mm
Optionally as accessories: - Thief-resistant fixing, complete accessories inc. safety nuts - bolt kit for AS 505/AS 510
neue fotos kommen noch
AS ... TUB ... Barrier
AS 505
AS 510
68
Barrier
TUB 1000
NEU
Barrier TUB 1010 - Thief-resistant fixing, complete accessories, as standard incl. safety nuts
Barrier TUB 2020 - Thief-resistant fixing, complete accessories, as standard incl. safety nuts - Dimension of the front Width = 155 mm Abmessung der Frontseite, Height = 430 mm Höhe = bitte den Abstand zu 430mm anpassen ???
TECHNICAL DATA: - Post ø: 48 mm - Height above ground: 460 mm - Drive-over height: ca. 55 mm - Width: 850 mm
TECHNICAL DATA: - Height above ground: 475 mm - Drive-over height: approx. 90 mm - Width: 780 mm
Fuß 3-eckig
TUB ...
TUB ...
Barrier
Barrier
TUB 1010
TUB 2020
69
FLEXY® Flexible Barrier Flexy B 600/F 600 - Crashproof, centre post and bars are spring-loaded (B 600/B flexible). - Flexibility up to 45ø - F 600 (F firm) with rigid bars. - Thief-resistant fixing, complete accessories, as standard incl. safety nuts - Warning effect due to reflecting foil.
FLEXY® Flexible bollard Flexy P 600/P 750 - Crashproof post flexibility up to 45°. - Thief-resistant fixing, complete accessories, as standard incl. safety nuts - Warning effect due to reflecting foil.
TECHNICAL DATA: - Post ': 50 x 80 mm - Baseplate: 250 x 150 mm - Dimension: B 600 F 600 (flexible (rigid side bars) side bars) - Drive-over height: approx. 75 mm
TECHNICAL DATA: - Post ': 50 x 80 mm - Baseplate: 250 x 150 mm - Drive-over height: ca. 75 mm - Height above ground: P 600 600 mm P 750 750 mm
Width: Height:
70
1000 mm 1000 mm 600 mm 600 mm
Flexible Barrier
Flexible bollard
B 600
P 600
F 600
P 750
STEEL
FLEXIBLE BOLLARD FLEXY® Flexible bollard with signal ring Flexy PV 600 - High warning effect due to red signal ring with white label field. - With weather-resistant stickers individual design possible. - Centre Post steel, galvanised. - Thief-resistant fixing, complete accessories, as standard incl. safety nuts.
TECHNICAL DATA: - Post': 50 x 80 mm - Baseplate: 250 x 150 mm - Dimensions: PV 600 Height: 600 mm Width: outside ø 520 mm inside ø 440 mm Marking space: 100 x 400 mm
Flexible bollard
PV 600
Solar
Barrier AS 525 - Prevents passage in parallel arrangement. - Tiltable. - As standard lockable. - Hinges made of robust injection moulding. - Warning effect due to reflective foil.
Park Protect Solar/Park Protect Automatic parking barrier, tiltable, with remote control AS PP - The automatic parking barrier for individual securing of parking spaces. - Operation independent from any power source due to solar cells or rechargeable battery. - Maintenance-free.
TECHNICAL DATA: - Post ': 70 x 70 mm - Height above ground: 500 mm - Width: 770 mm - Baseplate: 200 x 100 mm
TECHNICAL DATA: Length: 750 mm Width: 230 mm Drive-over height: 95 mm Bar height: 730 mm Barrier counterforce: 0,5 kg Fixing: Face fixing Supply: Park Protect Solar: 6 V Akku charged via solar cell Park Protect: 6 V Akku Operating period: approx. 6 Monate (afterwards recharging battery) Operation: Remote control:
up to 12 m
Solar
Pointed head
AS 525
72
with Remote control
with Remote control Solar
Park Protect
Park Protect Solar
ALUMINIUM
Solar
BARRIER
Barrier AS SPM 150/3 - .../22 - No electric installation necessary. - Compact pre-assembled unit. - Charging via solar electricity. - With remote-control, distance 12 m. - Bar with red reflective strips. - Main post and bar aluminium, powder coated. - With a lasting reliable technology.
TECHNICAL DATA: Baseplate: 200 x 200 x 5 mm Distance between holes Baseplate: 165 x 165 mm Width: 1000 mm, 1500 mm, 2000 mm, 2500 mm Bar: 60 mm Main post: 150 x 150 mm Fixing: Face fixing (Optional with wall fixing)
Solar
Voltage: Sperrmaster: 6 V Akku charged via solar cell Operation: Remote control: up to 12 m With emergency unlocking mechanism without tools.
AS SPM 150 / ...
AS SPM 150 / ...
with Remote control
with Remote control
AS .../3
AS SPM 150/3
---
AS .../22
---
AS SPM 150/22
73
ACCESSORIES Order-No.
AS PP AS SPM
Maintenance-free battery with lead/absorbed technology. Absolutely maintenance-free, high recombination ability in cycling operation, valve-regulated plastic construction as protection for overload. We recommend deep discharge for photovoltaic applications and our control modules! TECHNICAL DATA: - Nominal voltage 6 volts - Length 151 mm - Width 50 mm - Height 95 mm
74
AS PP AS SPM
1 channel hand transmitter for AS PP and AS SPM incl. battery.
AS PP AS SPM
charger AS PP and AS SPM for maintenance-free battery incl. overcharge protection.
ACCESSORIES Order-No.
RAE RAR RAS
Reflectable tape, width: 50 mm sliver grey, red, black
AS-DL
Expansion bolts (1 pair) for inserting in concrete or natural stone for boring ø 14 mm, M 8 x 100 Length approx. 100 mm
AS-KP
Baseplate setting in concrete for all tiltable bollards Base plate approx. 200 x 100 mm Shaft length approx. 360 mm incl. M12 Nirosta-screws
AS-UB
U-bolt for all tiltable bollards, M 12 thread incl. U-washers and nuts. For all bollards with baseplate 200 x 100 mm.
CM CI SP8
Key for master lock Key for profile cylinder simultaneous locking Key for 9 mm PZ-triangular lock
75