Tested and approved HHIC is continuing its work on a voluntary industry spare part certification scheme for boiler components under the Benchmark brand, focused on ‘safety-critical’ boiler components.
L
ast year we wrote in this magazine about an industry scheme being developed around gas appliance spare part safety. The article explained the importance of making informed choices about the spare parts you source and install to repair and maintain gas appliances, and help you discharge your legal duties. Before we say more on the scheme, it is worth recapping on a very important point. The Gas Safety (Installation & Use) Regulations 1998 as amended states: “No person shall carry out any work in relation to a gas appliance which bears an indication that it conforms to a type approved by any person as complying with safety standards in such a manner that the appliance ceases to comply with those standards.” This means that modifications to gas appliances that risk altering their technical characteristics and undermine validated safety certifications potentially place you in legal jeopardy. There needs to be greater clarity about which parts have been physically proven to operate safely inside a given gas appliance. And it might surprise you to know that this is not always the case today – and it’s not only limited purely to ‘illegal’ parts, ie, those that are copies or counterfeits. When it comes to replacing a part, the options may seem the same, or very similar: but they may not be underpinned by robust manufacturer testing. The facts are that the extensive product research, development and testing that gas appliance manufacturers carry out when
28 April 2021
they create a new product and bring it to market provide reassurance for those installing the final gas appliance that each component part will perform as it is intended to. When an original equipment manufacturer (OEM) spare part is used, if repair or maintenance is required, checks and balances are in place to ensure that a correctly installed spare of this type will restore the appliance to full, safe working order.
members have provided sobering examples about the differences in performance of part variants seemingly for the same application. Starting with basic visual indicators, and compared with the manufacturer’s genuine part, problems range from uninsulated electrical connections and missing earth connections, to inadequate fixings for combustion fans. When performance is tested, then parameters such as
“HHIC manufacturing members have provided sobering examples about the differences in performance of part variants seemingly for the same application.” Choosing a spare part Does choice of spare part really matter? The simple answer is yes. Technical Bulletin 1161 states that registered businesses should only use manufacturer-approved replacement parts. Using unapproved parts could result in the part appearing to function correctly but it might be dangerous in practice because the safety and performance of the appliance cannot necessarily be ensured if the manufacturer’s recommended parts are not used. Several HHIC manufacturing
temperature and electrical surge can greatly exceed those of the OEM design, and so raise safety concerns. What is the solution? Where does this leave you in buying spare parts that will ensure your customers are safe? Opting only for genuine manufacturer parts, in line with TB 116, is the easiest way. But HHIC does feel that a responsible, industry-led labelling system would provide greater clarity about alternative options and what they offer. We already
have the legally required CE mark for gas appliances and many of their component parts, even when sold as spares, which is a great starting point. We think we could build on the principles of this kind of mark. A recognisable mark, such as Benchmark, could help you stay within the law and keep your customers safe, as well as helping market transparency. Spare parts carrying this mark would be proven to have met defined industry test criteria, designed to help ensure that they perform safely within the appliances with which the part manufacturer advises they are compatible. HHIC has already carried out a thorough review of the legislative requirements relating to the sale of gas appliance spare parts and we are now beginning to finalise a programme of work to underpin a voluntary industry spare part certification scheme. This is aimed to be an extension of the Benchmark brand, initially focused on ‘safety-critical’ boiler components. We are mapping various safety-critical boiler components to the appliance test standards – EN 15502-1(2) and EN 155022-1(3) – to inform an appropriate and bespoke test regime, all with validated appliance safety in mind. This will draw from the boiler test standards, but, via an HHIC
