JUNO International catalogue by Adolfo ramirez

Paints, enamels and varnishes for decorative, professional and industrial sectors

International Catalogue

Index Corporate profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Paint systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Professional sector

..............................

1.8.

Paints and treatments for facades . . . . . . . . . . . . . . . . . Outdoor paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indoor decorative paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Junomatic tintometric system . . . . . . . . . . . . . . . . . . . . . . . . Wood treatment and decoration . . . . . . . . . . . . . . . . . . . . Plasters and fillers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Industrial sector

1.1. 1.2. 1.3. 1.4. 1.5. 1.6. 1.7.

....................................

6 9 13 14 17 20 20 23 24

Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 2.2. Enamels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 2.3. Special industrial paints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.1.

Colour, use and legal disclaimer: Printed colours in this catalogue may vary as printing inks do not perform like dying inks. Showed colours are approximations and therefore not valid for decision making. For accurate colour samples, ask the marketing department for real applications or colour cards. This catalogue shows JUNO standard range. Product range, specifications, naming and code system may vary according to the markets. Contact the commercial department for further information and product possibilities. All art work is property of JUNO company and cannot be used or reproduced. Any unauthorized art work reproduction is protected by law. Any concerns as to the legality of reproduction should be directed to JUNO (infoweb@juno.es).

Quality since 1927 JUNO company was established in 1927, in Spain. It was founded by Mr.Â Julio Cano in Bilbao downtown, main city of the Basque Country, and the company remains faithful to their family origins. Main activity was the production of decorative and protective varnishes and paints, although along the years the production lines and business divisions have enlarged to industrial paints, paint machinery, tooling, refurnishing and decoration. Nowadays, JUNO has three factories located in Spain and over 75 own distribution points, satisfying all domestic and professional needs and leading the demanding facades paint sector as well as ecologic paints and enamels. Outgoing investments in R&D and production improvements together with right partnerships with premium quality raw material producers guarantee the steady quality of our products, some of them over 50 years experienced. From 2007 onwards, international activities have placed the JUNO brand worldwide. JUNO SUSTAINABILITY PROGRAMME JUNO corporate management strategy is based on a principle of harmonising economic success and social prosperity with environmental values. Our factories work with ISO 9001 Production and ISO 14001 Environment Systems to provide assurance to management, partners and customers that they are in control of the organisational processes and activities having an impact on the environment and to assure employees that they are working for an environmentally responsible organisation.

Flameproof

B-s1,d0

Juno International Catalogue

ART INSTITUTIONS

PARKINGS

SWIMMING POOLS

SPORT FACILITIES

INDOOR WOOD

SHIP DECKS

FENCES

HOTELS

STORAGE CONTAINERS

ELECTRICAL PYLONS

DECORATIVE FACAD

EMBLEMATIC STRUCT

DES

TURES

Work done, satisfaction guaranteed. FACADE TREATMENTS

Amateur painters and people fond of do-it-yourself get surprised when a professional is working, as the activity seems to perform smooth, easy and according to plan. It is not only due to their experience, gained over years and years, and professional skills. The right selection of the products, proper preparation of the supports and suitable application under manufacturerâ&#x20AC;&#x2122; advices surprise during the process, and deeply

OUTDOOR WOOD

indeed once the work is complete. Professional paint not only means intensive application or difficult work conditions, it is more related to the prescription of integral paint systems.

ENERGY PIPES

INDUSTRIAL STRUCTURES

Paint systems Paint systems, either decorative or industrial, in new or worn substrates, require the right selection of the products, optimal application conditions and support preparation. Occasionally, when work is not satisfactory, it’s usual to accuse the paint, latest process and therefore the most exposed to blame. Nonetheless, previous steps related to advise, preparation and application guarantee the success.

BRICKS

CONCRETE

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite or Hidrokril to improve adherence.

Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite or Hidrokril to improve adherence. Use Invisible primer if the support requires anti-damp properties.

Preparation: Not required, unless the support has defects, cracks or damp stains.

Preparation: Not required, unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.

Finish: Use the Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite or Hidrokril to improve adherence.

Preparation: If the substrate iss not properly prepared, use Akril 80. Otherwise, use Junolite to improve adherence.

Preparation: Not required, unless the support has defects, cracks or damp stains.

Preparation: Not required unless the support has defects, cracks or damp stains. Use Invisible primer if the support requires anti-damp properties.

Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Juno International Catalogue

Finish: Use Junokril. Use Juno-Rev coating in case the surface is not under intense weather conditions. If customised colour is required, use Bikril or Luna bases for the tintometric system. Apply two coats; first to protect and second for decorative purposes.

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: If the support is not properly prepared, correct the defects with Plaste Juno and apply Hidrocril to improve adherence and penetration. Use Aquasell to cover joints and balance support absorption.

These supports are not appropriate for outdoor.

Preparation: Not required, unless the support has defects, cracks or damp stains.

These supports are not appropriate for outdoor.

Finish: Use Junoral range. If customised colour is required, use Junoprof bases. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: Once the substrate is clean, use Multisupport primer or Metalex. Use Waterprim for immediate room use.

Preparation: Once the substrate is clean, use Multisupport primer or Metalex.

Preparation: Not required, unless the support has defects, cracks or damp stains.

Finish: Use Junoplus. Use Aqualac for immediate room use. Apply two coats; first one for protective effect and second one for decorative purposes.

Finish: Use Junolac. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first one for protective effect and second one for decorative purposes.

Finish: Use Junolac. If customised colour is required, use Junomalte bases. Use Aqualac for immediate room use.

Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Indoor

Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.

METAL

Finish: Use Junokril. If customised colour is required, use Bikril bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Indoor

Finish: Use Junokril. For immediate room use or hypersensitive people and children use B-7 Eco. Apply two coats; first one for protective effect and second one for decorative purposes.

PLASTER

Finish: Use the high quality Junokril paint. Apply two coats; first one for protective effect and second one for decorative purposes.

Finish: Use Junoral range. If customised colour is required, use Junoprof bases. Apply two coats; first one for protective effect and second one for decorative purposes.

Finish: Use Junolac. If customised colour is required, use Junomalte bases. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.

ALUMINUIM & GALVANISHED

WOOD

WOODEN FLOOR

CONCRETE FLOOR

ASPHALT FLOOR

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: The substrate should be clean, without oils, oxide or previous paints. It’s recommended to use Multisupport primer for effective Antirust protection.

Preparation: Not required, unless the support has defects, cracks or damp stains.

Preparation: Not required, unless the support has defects, cracks or damp stains. Finish: Use Aqualac for immediate room use and when a customised colour is required.

Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system.

Finish: Use Junolac. If customised colour is required, use Junomalte bases for the tintometric system. To improve properties, use Antirust Junolac or Oxiforja. Apply two coats; first to protect and second for decorative purposes.

Finish: Use Junolac. If customised colour is required, use Junomalte as base for the tintometric system. Apply two coats; first one for protective effect and second one for decorative purposes.

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: Use waterbased Bondex treatment as protective barrier against insects.

Preparation: Use waterbased Bondex treatment as protective barrier.

Finish: Use Aquadur glossy finish for water resistance and hardness. Use Lasur to facilitate later treatments. Use Aqualac if a coloured finish is required.

Finish: Apply two coats of Junotinte to improve the wood resistance and hardness. To maintain the original wood beauty, use Junolac glossy varnish. Use Lasur to facilitate later treatments. Use Yacht or Teka oil if the wood is exposed to severe weather conditions.

Preparation: Gently sand the wood to remove previous treatments and apply Bondex classic.

Preparation: Gently sand the wood to remove previous treatments and apply Bondex classic. If the former treatment is Lasur, it’s ready for the finish coat.

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: Gently sand the wood to remove previous treatments and apply Aqueous floor wood protector.

Finish: Apply glossy Aqueous floor or Junodur varnish, in case the immediate use is not required.

Finish: Apply Yacht Spar varnish due to the great resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.

Preparation: Gently sand the wood to remove previous treatments and apply Aqueous floor wood protector. If the former treatment is Lasur, it’s ready for the finish coat.

Preparation: Gently sand the wood to remove previous treatments and apply Aqueous floor wood protector. If the former treatment is Lasur varnish, it’s ready for the finish coat.

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.

Finish: Use chloro-rubber Dynamol. If not exposed to intense use, it’s possible to use Junosol or Junosport. Use 2 components epoxy Pavimic floor.

Raw substrate » Indoor

Raw substrate » Outdoor

Worn substrate » Indoor

Worn substrate » Outdoor

Preparation: The substrate should be rough and clean, without oils, dust or previous treatments.

Finish: Use Junosol or Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok (2/C).

Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.

Finish: Use waterbased Junosport. For improved resistance, use waterbased 2 components epoxy Dynapok (2/C).

Finish: Use waterbased 2 components epoxy Dynapok (2/C). It’s possible to use Junosol or Junosport if not under intense use.

Finish: Use Aquadur glossy for water resistance and hardness. Apply two coats of Junotinte to improve the wood resistance.

Finish: Apply Aqueous floor or Junodur varnish, in case the immediate use is not required.

Finish: Apply two coats of Junotinte. To maintain the original wood colour and beauty, use Junolac glossy varnish. Use Junolac bright enamel for a coloured finish.

Finish: Apply Yacht spar varnish due to the high resistance to outdoor weather conditions or Lasur aqueous to improve wood permeability.

Juno International Catalogue

Professional sector Paint means immediate satisfaction. Paint is the first choice to give a room an instant makeover. It not only changes the looking but itâ&#x20AC;&#x2122;s able to draw attention, hide walls that are in poor condition or create the feeling of a light, airy, or bigger room. Colour possibilities, rich colour depth and effects are uncountable, but possibilities enlarge indeed if taking into account the varied applications, ranges from glossy to matt finish or textured. Up-to-date paints, enamels and varnishes become active, adding waterproof, fungicide, bactericide or mildew resistant properties.

1.1.

Paints and treatments for facades

1.1.1.

Smooth waterbased paints

NOVOKRIL Satin or matt

Waterbased premium paint with mildew resistant properties. Based on high flexibility and adherence pure acrylic copolymers and UV filters that create a water resistant film, while preserving the permeability. Indoor or outdoor. Water dilution and cleanliness.

White / Satin (62.150)

JUNOKRIL Satin

Waterbased premium paint with mildew resistant properties. Based on high flexibility and adherence acrylic-vinyl copolymers and UV filters that create a water resistant film, while preserving the permeability. Indoor or outdoor. Water dilution and cleanliness.

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

GEOCISA

White / Matt (62.195)

15 l

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

Flameproof

GEOCISA

Matt

! Satin finishing White base / P (61.000) Medium base / D (61.195) Transparent base/TR (61.196) Black (61.001)

Mars (61.028) Wheat (61.029) Cement (61.038)

Orange (61.020) Jai-Alai green (61.052) New blue (61.012)

Slate (61.002) Earth (61.004) Sky blue (61.009) Sahara (61.018)

Ochre (61.065) Turkish red (61.070) Tile (61.079)

Red (61.016) Yellow (61.025) Colours under request

Matt finishing

Suitable for JUNOMATIC

BIKRIL Satin or matt

White base / P (60.500) Medium base / D (60.501)

Transparent base/TR (60.502) Yellow base (88.895)

Waterbased paint. Based on acrovinyl resins and UV filters that create a water resistant film, while preserving the permeability. Indoor or outdoor. Water dilution and cleanliness.

Red base (88.896) Colours under request

White (60.100) Matt finishing White base / P (60.300)

A-100 STIMAX Matt

Transparent base/TR (60.302)

Colours under request

Medium base / D (60.301)

Waterbased paint. Based on acrylic resins. Indoor or outdoor. Water dilution and cleanliness.

Colours are approximations and may vary once applied.

10 l

750 ml

15 l

750 ml

15 l

750 ml

15 l

750 ml

Recommended for facades, walls, bathrooms and rooms that may require a water resistant and permeable quality matt finishing.

White / Matt (62.400)

15 l

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

Satin finishing

Suitable for JUNOMATIC

B-s1,d0

15 l

750 ml

Juno International Catalogue

A-5000 Matt

Great coverage waterbased paint. Based on acrylic resins. Indoor or outdoor. Water dilution and cleanliness.

Recommended for facades, walls, bathrooms and rooms that may require a quick drying matt finishing, facilitating the later coats.

White / Matt (62.590)

MEDITERRANEAN FACADES Matt

Rough waterbased paint. Based on acrylic copolymers. Indoor or outdoor. Water dilution and cleanliness.

Recommended for walls and rooms that may require a rough matt finishing and for outdoor facades not directly exposed to severe weather conditions.

White / Matt (73.312)

1.1.2.

15 l

Elastic waterbased paints ELASTIC ROOFS

Waterbased elastic paint. Based on acrylic resins with excellent mechanic and water protective properties and broad range of permanent elasticity (–20 °C to 60 °C). Outdoor use. Water dilution and cleanliness.

Recommended for the waterproofing and rough decoration of facades, ground floors and roofs with cracks or fissures.

! White (62.601)

ANTILEAK JUNOTERAS

Waterbased waterproofing elastic paint. Based on elastomeric acrylic resins. Outdoor use. Water dilution and cleanliness.

Red (62.602)

Recommended for the horizontal (over 1% slope gradient) and vertical waterproofing on facades, balconies and roofs without fissures over 0.6 mm that may have damp problems not being exposed to intense use.

! White (62.641)

15 l

Green (62.643)

Grey (62.644)

15 l

Red (62.642)

JUNO ELASTIC

Waterbased waterproofing elastic paint. Based on elastomeric acrylic resins. Outdoor use. Water dilution and cleanliness.

15 l

Terracotta / Semi-matt (62.870)

1.1.3.

Stone coatings

LUNA COAT

Stone coating. Smooth finishing. Based on styrene resins with excellent flexibility and waterproofing properties. Indoor or outdoor. Water dilution and cleanliness.

Recommended to hide defects on the support giving a decorative and protective finishing.

15 l Suitable for JUNOMATIC

Juno International Catalogue 2012

White base / P (67.500)

Colours under request

Colours are approximations and may vary once applied.

JUNO-REV

Stone coating. Smooth or rough finishing. Based on a acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability. Indoor or outdoor. Water dilution and cleanliness.

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

GEOCISA

Rough finishing

15 l

White (64.500)

! Smooth finishing

SUPER JUNO-REV

White (65.500) Grey (65.502) Clay (65.515)

Brick (65.547) Terracotta (65.548) Light beige (65.560)

Cinnamon (65.582) Hazelnut (65.584) Dune (65.585)

Sand (65.521) Cream (65.522) Wheat (65.530)

Turkish red (65.570) Tile (65.575) Pastel (65.580)

Mustard (65.550) Jai-alai green (65.552)

Stone coating with mildew and carbonate resistant properties. Smooth finishing. Based on high quality acrylic resins with excellent flexibility and waterproofing properties while preserving the permeability. Indoor or outdoor. Water dilution and cleanliness.

Recommended for cement and concrete supports that may require water and damp resistance (facades, walls, yards).

1.1.4.

15 l

White / smooth (65.101) Turkish red (65.121)

Cream (65.118) Dune (65.116)

Landscape (65.194) Wafer (65.184)

Tile (65.132) Volcano (65.103) Brick (65.106)

Clay (65.105) Straw (65.195) Mustard (65.107)

Clear bone (65.119) Wheat (65.110) Jai-alai green (65.130)

Terracotta (65.102) Clear salmon (65.153) Arab brown (65.111) Cinnamon (65.134) Hazelnut (65.115) Sand (65.117)

Desert (65.175) Ivory (65.154) Pastel (65.135) Gold (65.177) Bull-ring sand (65.112) Vanilla (65.196)

Olive green (65.108) Clear green (65.113) Throne blue (65.143) Montgo blue (65.104) Colours under request

15 l

Special paints A-4000 Matt

Waterbased paint. Based on acrylic resins with permeable, water resistant, anti-dust properties. Indoor or outdoor. Water dilution and cleanliness.

Recommended for facades, walls, bridges, warehouses, tunnels and parking that may require a quality matt finishing.

15 l

Grey / Matt (62.512)

SILICATO FACADES Matt

Silicate paint with excellent transpiration. Based on potassium silicates and inorganic pigments. Indoor or outdoor. Water dilution and cleanliness.

Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV and dirtiness resistance in industrial installations.

15 l

White / Matt (75.301)

Colours are approximations and may vary once applied.

Colours under request

Juno International Catalogue

SILICATO 5 Matt

Silicate paint with excellent transpiration. Based on potassium silicates and inorganic pigments. Indoor or outdoor. Water dilution and cleanliness.

Recommended as a preparatory and finish paint for mineral walls thanks to the anti-blister effect, mildew protection, UV resistance and dirtiness in industrial installations.

15 l

White / Matt (75.362)

JUNOLITE FACADES Matt

Self-cleaning permeable paint for facades. Based on pliolite resins and organic diluents. Outdoor use. Solvent (D-40) dilution and cleanliness.

Colours under request

Recommended to coat cement and concrete facades and walls.

15 l

White / Matt (62.900)

1.1.5.

Primers and treatments

HIDROCRIL Waterbased

Waterbased acrylic sealer with excellent adherence and deep penetration. Indoor or outdoor. Water dilution (4:1 Water-Hidrocril) and cleanness.

Recommended for supports with adherence problems or that requires an effective primer to consolidate the support.

Colourless (81.006)

AKRIL - 80

Acrylic sealer. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Waterbased

Waterbased primer with excellent adherence and deep penetration. Indoor or outdoor. Water dilution and cleanliness.

750 ml

Recommended to seal old mineral supports and consolidate differences in walls and supports (platter, stone, cement, concrete, old paints).

Colourless (42.115)

MINERAL PRIMER

20 l

15 l

750 ml

Recommended for mineral supports with adherence problems or that requires an effective primer to consolidate the support. Itâ&#x20AC;&#x2122;s also suggested as first coat for silicate paints.

15 l

Colourless (75.302)

SILOXANO SEALER

Protective primer for porous mineral supports. Based on polysiloxane resins that reduce the rain absorption on outdoor supports. Outdoor use. No dilution, ready to use. Solvent (D-16) cleanliness.

Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone). It maintains the original look of the support.

20 l

Colourless (68.104)

Juno International Catalogue

WATER RESISTANT SEALER

Protective primer for porous mineral supports. Based on aliphatic solvents and aluminium stearates that reduce the rain absorption on outdoor supports Outdoor use. No dilution, ready to use. Solvent (D-16) cleanliness.

Recommended to improve the rain protection while preserving the transpiration of the support (non vitreous bricks, grainy stone or natural stone).

Amber (68.101)

1.2.

Outdoor paints

1.2.1.

Paints for sport facilities and public installations

JUNOLINEA Waterbased

Concentrated waterbased paint. Based on acrylic copolymers. Indoor or outdoor. Water dilution and cleanliness.

20 l

750 ml

Recommended to signpost sport facilities, fairgrounds and safety at work over natural grass (football fields, farms, plot of lands), ground (building work, mountains and rural paths) or sand (beaches, playgrounds).

10 l

White (62.550)

JUNOSPORT Waterbased

Concentrated waterbased paint. Based on pure acrylic resins with great resistance to weather conditions and bleach. Indoor or outdoor. Water dilution and cleanliness.

Recommended for swimming pools, sport facilities and parking without intense traffic.

White (06.100)

Jai-alai green (06.152)

Tennis red (06.168)

Blue (06.105)

JUNOSOL Waterbased

Concentrated waterbased paint. Based on acrylic resins with great adherence, rub and weather conditions resistance. Based on styrene resins. Indoor or outdoor. Water dilution and cleanliness.

Recommended for sport facilities and parking without intense traffic.

15 l

White (06.162)

DYNAMOL

Jai-alai green (06.150)

Chloro-rubber paint with plastic effect and quick drying. Based on chloro-rubber resins with great resistance to acids and alkalis. Indoor or outdoor. Solvent (D-40) dilution and cleanliness.

Recommended for industrial installations, road signposts, garages or sport facilities. Not suitable for pitch or bituminous asphalts.

! White (09.500) Black (09.501)

Colours are approximations and may vary once applied.

Pearl grey (09.533) Jai-alai green (09.552)

Tennis red (06.160)

Tennis red (09.568)

15 l

750 ml

Juno International Catalogue 2012

1.3.

Indoor decorative paints

1.3.1.

Decorative waterbased paints

JUNORAL B-12 Semi-gloss

High quality waterbased paint with anti-microbial properties to resist mildew. Based on vinyl polymers with broad spectrum fungicide and bactericide properties. Indoor use. Water dilution and cleanliness.

Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection mildew. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

15 l

750 ml

White / Semi-gloss (72.010)

JUNORAL B-10 Semi-gloss

High quality waterbased paint. Based on vinyl polymers. Indoor use. Water dilution and cleanliness.

15 l

750 ml

White / Semi-gloss (72.000)

JUNORAL B-7 ECOLOGIC Matt

Ecological certificated waterbased paint, hypoallergenic and odourless. Based on 100% solvent free vinyl polymers. Indoor use. TĂ&#x153;V and Euro ecolabel certifications. Water dilution and cleanliness.

Recommended for hospitals, kindergartens, nurseries, baby rooms or rooms for hypersensitive people as it does not liberate any chemical component. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

15 l

750 ml

White / Matt (72.197)

JUNORAL B-7 Black / Matt

High quality waterbased paint. Based on acrylic polymers. Indoor use. Water dilution and cleanliness.

Recommended for stylish decoration, tunnel effect improvement or to hide pipes, electric or industrial under roof installations. Durable finishing withstands frequent washings. Self-levelling formula to reduce brush and roller marks.

Black / Matt (72.101)

JUNORAL B-5 FUN Matt / Fungicide

Waterbased paint with anti-microbial properties to resist mildew. Based on acrylic copolymers with broad spectrum fungicide and bactericide properties. Indoor use. Water dilution and cleanliness.

Matt

Great coverage and performance waterbased paint. Based on acrylic copolymers. Indoor use. Water dilution and cleanliness.

Juno International Catalogue

15 l

750 ml

Recommended for standard use in building and decoration over cement or plaster. Damp rub resistance.

White / Matt (73.001)

Recommended for the protection and decoration of cement, plaster or stone supports that require effective protection against mildew. Damp rub resistance.

White / Matt (73.023)

JUNORAL B-5

15 l

10 l

750 ml

1.3.2.

Certified waterbased paints

JUNORAL N-5 Matt / Quality certification

AENOR quality certificated waterbased paint (type II) that guaranties over 5.000 wash cycles under UNE 48243 procedures. Based on water dispersed resins. Indoor use. Water dilution and cleanliness. Flameproof

B-s1,d0

CASTOR-N Matt / Quality certification

AENOR quality certificated waterbased paint (type I) that guaranties over 1.000 wash cycles under UNE 48243 procedures. Based on water dispersed resins. Indoor use. Water dilution and cleanliness.

Recommended for standard use in building and decoration over cement or plaster in accordance with the prescribed and certificated memory project. Durable finishing withstands frequent washings. Great coverage and performance.

White / Matt (73.040)

15 l

750 ml

White / Matt (73.113)

1.3.3.

Professional waterbased paints J-300 Satin

Waterbased paint. Based on water dispersed resins. Indoor or outdoor. Water dilution and cleanliness.

Recommended for standard use in building and decoration over cement or plaster. Good whiteness, coverage and easy application. Damp rub resistance.

White / Satin (71.055)

J-28 Matt

Waterbased paint. Based on acrylic copolymers, titanium bioxide and spread activators. Indoor use. Water dilution and cleanliness.

J-25 Matt

Waterbased paint. Based on acrylic copolymers, titanium bioxide and spread activators. Indoor use. Water dilution and cleanliness.

15 l

10 l

Recommended for standard use in building and decoration over cement or plaster, especially to hide substrate imperfections and visible joins in plasters. Damp rub resistance. Water steam permeable.

White / Matt (73.168)

15 l

Recommended for standard use in building and decoration to hide substrate imperfections. Damp rub resistance.

White / Matt (73.150)

1.3.4.

15 l

Textured paints

CASTOR PICAR EXTRA

Thick textured paste. Based on excellent hardness adherence and whiteness acrylic copolymers. Indoor use. Water dilution and cleanliness.

Recommended to hide substrate imperfections on stairs, public spaces, offices or rooms.

White / Matt (74.304)

15 l

Juno International Catalogue

CASTOR GOTA-PIK

Soft textured paste. Based on excellent hardness adherence and whiteness acrylic copolymers. Indoor use. Water dilution and cleanliness.

Recommended to create fine droplet textures and hide substrate imperfections.

15 l r

White (74.303)

1.3.5.

Colorexpress customised production system

COLOREXPRESS

Customised production system for coloured waterbased paints that assures the perfect homogenization of the quality and colour of the paint, under the customer specifications.

Ask the commercial department for detailed information about this system.

15 l r

Colours under request (73.700)

1.3.6.

Colorants, Additives and Others JUNORAL Waterbased

Concentrated liquid colorant. Indoor use* and outdoor. Vermillion red, Lemon yellow and Metis green colorants are only suitable for indoor.

Recommended to dye any paint. The colorant proportion should not exceed 3%.

! Capri blue (78.013) Vermillion red* (78.018) Lemon yellow* (78.026) Metis green* (78.055)

UNIVERSAL JUNO

Mountain green (78.056) Chamois (78.066) Deep ochre (78.064)

Universal concentrated colorant. Indoor use* and outdoor. Vermillion red and Lemon yellow colorants are only suitable for indoor.

Black (78.001) Turkish red (78.070) Brown (78.080)

750 ml

125 ml

Recommended to dye any paint. The colorant proportion should not exceed 3%.

MISKY-MISKY Fungicide additive

125 ml

Blue (79.514) Vermillion red* (79.518)

Green (79.555) Black (79.501)

Lemon yellow* (79.526)

Oxide red (79.519)

Ready to add preparation with broad spectrum fungicides. Based on heterocyclic to perform an intense and long lasting broad spectrum action moulds and seaweeds.

Ochre yellow (79.565) Brown (79.580)

Recommended as additive for waterbased paints and coats to enhance the protective properties. Intensive shake before use.

125 ml r

White (82.101)

JUNO GLUE

Waterbased glue for manual artwork.

Glue

1 kg r

White (79.597)

Juno International Catalogue

500 gr r

125 gr r

Colours are approximations and may vary once applied.

1.4.

Enamels

1.4.1.

Enamels JUNOLAC

Glossy, satin or matt

Synthetic enamel. Based on high solid alkyd resins and pigments. Indoor or outdoor (only glossy finishing). Solvent (D-16) dilution and cleanliness.

Recommended for metallic and wood surfaces. Application on thin coats to guarantee inner dryness.

Flameproof

B-s1,d0 ! Glossy finishing White (15.000)

Green (15.057)

Cream (15.061)

Black (15.001) Danube blue (15.006)

Ochre (15.065) Dark ochre (15.074)

Pine green (15.053) Sea green (15.059)

Horizon blue (15.007) Cobalt blue (15.013)

Leather (15.067) British red (15.068)

Bone (15.060) Chamois (15.066)

Navy blue (15.014)

Arabic brown (15.069)

Orange (15.017)

Bordeaux red (15.021) Army grey (15.032) Pearl grey (15.033)

Brown txoko (15.071) Brown (15.073) Glossy green (15.048)

Red (15.018) Bright red (15.020) Lemon yellow (15.026)

Bluish grey (15.034) Medium grey (15.037)

Spring green (15.049) Permanent green (15.050)

Golden yellow (15.027)

Satin finishing (only indoor)

White (15.100)

Black (15.101)

Matt finishing (only indoor)

White (15.200)

JUNOLAC ANTIRUST Glossy

Antirust synthetic enamel. Based on resins and antirust additives. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

White (04.651)

JUNOPLUS Glossy, satin or matt

Black (04.652)

Synthetic. Based on alkyd resins. Indoor or outdoor (only glossy finishing). Solvent (D-16) dilution and cleanliness.

Black (15.201)

Moss green (16.058) Arabic brown (16.069) Medium yellow (16.029) Ivory (16.005) Traffic grey (16.006) Chamois (16.002) Ochre (16.007)

750 ml

375 ml

750 ml

375 ml

750 ml

Recommended for metallic or steel surfaces where itâ&#x20AC;&#x2122;s not possible an intense preparation of the surface with an anti-rust primer (huge metallic structures, railings, fences, bridges).

Colours under request

750 ml

Recommended for properly primed metallic, wood or masonry surfaces.

! Glossy finishing White (16.000) Black (16.001) Blue (16.008) Bright blue (16.010) Light grey (16.031) Cloud grey (16.038) Dark grey (16.039)

Brown (16.003) Grass green (16.004) Carriage red (16.021) Blood red (16.022) Carriage green (16.011) Overseas blue (16.009) Fire red (16.012)

750 ml

Meadow green (16.054) Satin finishing (only indoor)

White (16.100)

Black (16.101)

White (16.200)

Black (16.201)

Matt finishing (only indoor)

Colours are approximations and may vary once applied.

Juno International Catalogue

OXIFORJA

Wrought iron finishing synthetic with mica particles. Based on alkyd resins and antirust pigments and additives that provide elasticity, bonding and highly water resistant properties. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Recommended for lampposts, manhole covers, fences, benches, litter bins, metallic doors and any other urban furniture.

! Black (05.700) Steel grey base (05.701)

Suitable for JUNOMATIC

AQUALAC Glossy, Satin or matt Waterbased

Oxide red (05.723) Annealed blue (05.720)

Great coverage waterbased. Based on acrylic resins with quick dry, low odour and great resistance to the outdoor. Indoor or outdoor (only glossy finishing). Water dilution and cleanliness.

Gold (05.722) Bronze green (05.721)

Suitable for JUNOMATIC

Medium base / D (10.302) Transparent base/TR (10.303)

Yellow base (10.304) Red base (10.305)

Medium base / D (10.402)

Transparent base/TR (10.403)

Satin finishing (only indoor) White base / P (10.400) Matt finishing (only indoor) White base / P (10.500)

1.4.2.

Preparatory synthetic primer. Based on deep fixing resins with auto levelling finishing for easy paint. Indoor or outdoor. Solvent (D-17) dilution and cleanliness.

750 ml

Recommended for ferric, metallic, aluminium, galvanised, PVC or indoor wood surfaces.

White (27.040)

WORKSHOP PRIMER

Quick drying preparatory synthetic primer. Based on alkyd resins and ferric oxides. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Oxide red (22.110)

METALEX

Antirust lead-free synthetic primer. Based on soya oil resins and zinc phosphates. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Grey (22.111)

Antirust synthetic primer. Based on antirust resins. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

750 ml

15 l

750 ml

Recommended for ferric surfaces (doors, structures, fences, tanks) that require field corrosion protection.

! Orange (22.002)

Juno International Catalogue

Recommended for metallic (except aluminium and galvanised) surfaces that require field corrosion protection.

White (27.000)

METALEX 212

15 l

Recommended for the preparation of ferric surfaces.

Primers

MULTISUPPORT PRIMER

750 ml

Recommended for properly primed metallic, wood or masonry surfaces.

! Glossy finishing Colours under request White base / P (10.300)

750 ml

Colours are approximations and may vary once applied.

WATERPRIM Waterbased

Antirust synthetic primer. Based on antirust resins. Indoor or outdoor. Water dilution and cleanliness.

Recommended for properly prepared ferric, metallic, aluminium, galvanised, PVC surfaces that require field corrosion protection and are located in poor ventilated areas.

White (30.006)

1.4.3.

750 ml

Sealers

AQUATAPA Odourless / Waterbased

Waterbased waterproof coat. Based on anti damp resins. Indoor use. Water dilution and cleanliness.

Recommended for the protection of mineral or wood surfaces with water soluble stains, exposed to fumes, vapour or humidity condensation areas.

White / Matt (21.205)

AQUASELL Powder applied plaster Waterbased

Waterbased coverage sealer. Based on acrylic resins with high coverage and resistance. Indoor or outdoor. Water dilution and cleanliness.

15 l

750 ml

Recommended as a preparatory coat over substrates with severe differences in paint absorption (masonry, plaster joins o powder applied plasters).

15 l

White / Matt (21.203)

HANGERS SEALER

Synthetic coverage coat. Based on high resistance and coverage alkyd resins. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Recommended to prepare wooden or masonry surfaces.

White / Matt (21.000)

NATURSELL Waterbased

Waterbased sealer. Based on acrylic resins with high coverage and resistance. Indoor or outdoor. Water dilution and cleanliness.

15 l

750 ml

Recommended for wooden and masonry surfaces.

White / Matt (21.100)

ANTI-STAIN Odourless / Preventive

Anti-stain preventive synthetic coat. Based on plioway resins with anti-stain and antimicrobial properties to resist mildew. Indoor use. Solvent (D-69) dilution and cleanliness.

750 ml

Recommended for any support with humidity, grease or nicotine stains.

White (21.350)

15 l

750 ml

Juno International Catalogue

ANTI-DAMP SEALER

Quick drying synthetic waterproof coat. Based on anti damp resins and cement particles. Indoor or outdoor. Solvent (D-16) dilution and cleanliness.

Recommended for occasional damp, grease or oil stains. Quick dry of the support to facilitate the paint or wallpaper.

White / Matt (88.000)

750 ml

Junomatic tintometric system

1.5.

JUNOPROF Satin / Matt

Waterbased base paint to dye. Satin or matt finishing. Indoor or outdoor. Water dilution and cleanliness.

Recommended for standard use in building and decoration over cement or plaster.

Satin finishing White base / P (88.865)

10 l

Medium base / D (88.866)

Transparent base/TR (88.867)

Matt finishing White base / P (88.868)

Suitable for JUNOMATIC

JUNOMALTE Glossy / Satin

Medium base / D (88.869)

Synthetic base paint to dye. Glossy or satin finishing. Indoor or outdoor (only glossy finishing). Solvent (D-16) dilution and cleanliness.

Transparent base/TR (88.870)

Medium base / D (88.991)

Transparent base/TR (88.992)

Satin finishing White base / P (88.993)

Suitable for JUNOMATIC

JUNOMATIC COLORANT

Medium base / D (88.994)

Colorant to dye waterbased or synthetic bases.

Transparent base/TR (88.995)

750 ml

JS / Black (88.700) TS / Oxide ochre (88.707) WS / Oxide brown (88.710) XS / Grey (88.711) LS / Blue (88.701) PS / Green (88.704)

KU / Oxide white (88.714) NS / Red (88.703) QS / Intense yellow (88.705) RS / Intense blue (88.706) VS / Intense red (88.709)

1.6.

Wood treatment and decoration

1.6.1.

Waterbased varnishes and woodprotectors

AQUEOUS FLOOR WOODPROTECTOR

r 10 l

Recommended for Junomatic tintometric system.

Suitable for JUNOMATIC

750 ml

Recommended for standard application on metallic and wooden surfaces.

Glossy finishing White base / P (88.990)

Waterbased wood protector varnish, odourless. Based on acrylic resins. Indoor use. Water cleanliness.

YS / Oxide red (88.712) US / Orange (88.708) MS / Yellow (88.702) ZS / Violet (88.713) BS / Magenta (88.715)

Recommended as easy to sand wood protector for any wooden surface. Great filling performance, easy odourless application and quick drying. Itâ&#x20AC;&#x2122;s suggested to finishing with Aqueous floor varnish.

Colourless (82.414)

Juno International Catalogue

Colours are approximations and may vary once applied.

EXTRA WOODPROTECTOR (BONDEX)

Waterbased wood protector varnish, odourless, with active effect against insects, termites and fungus. Indoor or outdoor. Water cleanliness.

Recommended for any kind of wooden surfaces, indoor or outdoor, that may require special preventive or curative treatments. Suitable for any later decorative finishing (lasur varnish, varnishing or decorative paint).

Colourless (41.201)

MULTITREATMENT (BONDEX)

Waterbased wood protector with active effect against insects, termites and fungus. Indoor or outdoor. Water cleanliness.

Glossy

Odourless waterbased varnish. Based on polyurethane resins that create a pleasant to the touch and yellowish resistant film. Indoor use. Water cleanliness.

Glossy, satin or matt

Waterbased varnish. Based on acrylic resins that create a pleasant to the touch and yellowish resistant film. Indoor use. Water cleanliness.

Colourless / Glossy (82.480)

LASUR AQUEOUS

Colourless / Satin (82.481)

Waterbased damp-resistant lasur varnish, with deep penetration properties. Based on acrylic resins, colourless pigments and bactericides that create a micro porous and elastic film, UV resistant and transpired to the water vapour within the wood. Indoor or outdoor (except colourless). Water cleanliness.

750 ml

Colourless / Matt (82.482)

750 ml

Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that it’s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments.

Colourless / Satin (82.451) Chestnut (82.460) Oregon pine (82.461) Oak (82.462)

Rustic oak (82.463) Walnut (82.464) Mahogany (82.465)

Rosewood (82.466) Teak (82.467) Iroko (82.468)

750 ml

Synthetic varnishes and woodprotectors

CLASSIC WOODPROTECTOR (BONDEX)

Wood protector with active effect against termites and fungus. Indoor or outdoor. Solvent (D-16) dilution.

Colourless (41.200)

Recommended for any kind of wooden surfaces.

1.6.2.

Recommended for any floor, due to the odourless and quick drying application, rub resistance properties and easy cleaning. It’s suggested the wood preparation with Aqueous Floor Woodprotector.

Colourless / Glossy (82.410)

AQUADUR VARNISH

750 ml

Colourless (41.250)

AQUEOUS FLOOR VARNISH

Colours are approximations and may vary once applied.

750 ml

Juno International Catalogue

JUNOLAC VARNISH Glossy or satin

Synthetic varnish with UV protection. Based on alkyd resins that create a pleasant to the touch and yellowish resistant film. Indoor or outdoor (only glossy finishing). Solvent (D-16) dilution.

Recommended for any kind of wooden surfaces.

Amber / Glossy: 42.037

JUNOTINTE VARNISH Glossy

Synthetic varnish with UV protection. Based on alkyd resins and UV filters with decorative and protective properties. Indoor or outdoor. Solvent (D-16) cleanness.

Colourless / Satin: 42.038

Chestnut (42.043) Teak (42.044)

Synthetic damp-resistant lasur varnish, with deep penetration properties. Based on specific resins Indoor or outdoor. Solvent (D-16) cleanness.

Rosewood (42.045) Oak (42.046)

Colourless / Matt (41.210) Colourless / Satin (41.230) Oak / Matt (41.211) Oak / Satin (41.231) Mahogany / Matt (41.212)

Chestnut / Satin (41.233) Oregon pine / Matt (41.214) Oregon pine / Satin (41.234) Teak / Matt (41.215) Teak / Satin (41.235)

Walnut / Matt (41.217) Walnut / Satin (41.237) Macasar / Matt (41.218) Macasar / Satin (41.238) California pine / Matt (41.219)

Mahogany / Satin (41.232) Chestnut / Matt (41.213)

Rosewood / Matt (41.216) Rosewood / Satin (41.236)

California pine / Satin (41.239)

Glossy or satin

Polyurethane synthetic varnish. Based on alkyd resins that create a pleasant to the touch and yellowish resistant film. Indoor use. Solvent (D-16) cleanness.

Colourless / Glossy (44.001)

Colourless / Satin (44.002)

750 ml

Outdoor synthetic varnishes

YATCH SPAR VARNISH Glossy

Synthetic spar varnish with weather and UV resistance. Based on elastic resins and UV filters with long lasting decorative and protective properties. Indoor or outdoor. Solvent (D-16) cleanness.

Recommended for wooden surfaces under extreme weather conditions such as intense humidity, rain, sea or permanent exposition to the sun.

Amber / Glossy (42.036)

Recommended to varnish or restore wooden floor that may require resistance to home cleaning products and daily use.

750 ml

Floor synthetic varnish JUNODUR VARNISH

1.6.4.

Recommended for any wooden surface (doors, windows, fences, and porches) that once exposed to the weather conditions may diminish without getting chipped, so that itâ&#x20AC;&#x2122;s possible to renovate the beauty of the wood thanks to successive new applications, i.e., without removing old treatments. Itâ&#x20AC;&#x2122;s suggested to coat a preparatory matt varnish and finish with 2 protective satin coats.

1.6.3.

750 ml 350 ml

Pine (42.040) Walnut (42.041) Mahogany (42.042)

Matt or satin

Recommended for any kind of wooden surfaces.

CLASSIC LASUR (BONDEX)

750 ml 375 ml

Juno International Catalogue

750 ml

Colours are approximations and may vary once applied.

TEAK OIL (BONDEX) Tropical wood oil

Specific oiling for exotic wood. Based on alkyd resins and UV filters. Indoor or outdoor. Solvent (D-16) cleanness.

Recommended to preserve and enhance the natural beauty of exotic and tropical wood, extend the duration and protection against the elements. Recommended for garden furniture as well as indoor quality woods.

Colourless (41.252)

1.7.

750 ml

Plasters and fillers

FINISHING AND SMOOTHING PLASTER

Dust plaster for supports to be painted or wallpapered. Indoor use. Dust.

Recommended to hide small imperfections, cracks, holes, marks, joining, etc.

Code (77.000)

READY TO USE PLASTER

Ready to use high quality plaster. Indoor use. Ready to use.

15 kg

5 kg

1 kg

500 g

Recommended for support preparation.

Code (77.200)

INDOOR PROFESSIONAL PLASTER

Ready to use high quality plaster. Indoor use. Ready to use.

Recommended for intensive application.

5 kg

Code (77.202)

OUTDOOR PROFESSIONAL PLASTER

Ready to use plaster and filler. Outdoor use. Ready to use.

Recommended for supports exposed to water conditions.

5 kg

Code (77.203)

FILLER

Dust plaster for support preparation. Indoor use. Dust.

Recommended to smooth out supports before being painted or wallpapered.

Code (77.401)

MULTIUSE FILLER

Dust plaster for support preparation. Indoor or outdoor. Dust.

15 kg

5 kg

Recommended to smooth-out supports before being painted. 1 kg

Code (77.050)

FIBER PLASTER

Elastic ready to use plaster. Indoor or outdoor. Ready to use.

Recommended to mend small cracks on supports.

750 gr

Code (77.250)

Juno International Catalogue

1.8.

Solvents 20 l

500 ml

Mineral solvent for enamels and synthetic primers.

Code (50.012)

Mineral solvent for enamels and synthetic primers. Suitable for spray gun application.

Code (50.004)

Solvent for pliolite and chloro-rubber paints.

Code (50.000)

Universal diluent.

Code (50.017)

Solvent for plioway based paints.

Code (50.073)

Solvent for polyurethane based paints.

Code (50.007)

Solvent for epoxy based paints.

Code (50.010)

Solvent for quick drying enamels.

Code (50.005)

PRIMER

Solvent for Shop primer.

Code (50.705)

STOVE

Solvent for oven drying enamels.

Code (50.702)

CLEAN

Solvent for metallic surfaces.

Code (50.803)

Solvent for Dynapok S/D Epoxin.

Code (50.802)

ZIAMAR

Solvent for zinc silicate.

Code (50.712)

VINYL

Solvent for vinyl paints.

Code (50.708)

D-16 Mineral

D-17 Spray gun

D-40 Chloro-Rubber

D-45 Universal

D-69 Odourless

D-70 Junoretano

D-90 Epoxy

D-15

ALCOHOL

Juno International Catalogue

Colours are approximations and may vary once applied.

Industrial sector Efficiency, the answer to industrial requests. Paint treatments may be considered standard unless we start thinking about alternative uses not related to our daily use in decoration. Almost any support is suitable to be painted. Most of them need to be painted to improve protection. Industrial paint is characterised by intensive use, law regulations or companiesâ&#x20AC;&#x2122; high production standards, so the paint should be able to withstand demanding requirements and specifications. Industrial paints, if ever, require proactive R&D, trained staff and individual prescription so not all paint manufacturers are able to address the industrial sector.

2.1.

Primers

2.1.1.

Primers

DYNALINE PRIMER

Quick drying protective primer. Based on alkyd resins. Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection. Outdoor use. Solvent (D-17) dilution and cleanliness.

Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc. It provides over 40 micrometres per coat.

! Grey (22.807)

DYNAPOK PRIMER Zinc Phosphate 2 components

High adherence two components epoxy primer. Based on epoxy resin cured with amine adducts and an anticorrosive pigment blends. Indoor or outdoor. Solvent (D-90) dilution and cleanliness.

Red (22.812)

2 components

Red (22.700)

2 components

High adherence and resistance chloro-rubber primer. Based on chlorinated-rubber resins and zinc phosphate pigments combined with non-saponifiable plasticers. Indoor or outdoor. Solvent (D-40) dilution and cleanliness.

Two components high-body primer epoxy. Based on epoxy resins and zinc phosphate pigments. Free from lead and chromates. Solvent (D-90) dilution and cleanliness.

Quick drying primer. Based on phenol reactive polyvinyl - butiral resin and anti-corrosive pigments. Primer solvent dilution and cleanliness.

Recommended for the protection of metal and steel surfaces in chemicals, marine or industrial environments. It’s also suitable as middle coat in DYNAPOK and POXEMYC systems, according to specifications. It provides over 60 micrometres per coat.

Grey (22.726)

Recommended for efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It does not affect welding lines, and does not form pores. Line edges remain intact and it does not propagate flames. It provides over 15 micrometres per coat. The use of nitrocellulose, chloro-rubber, vinyl and some special coal-tar paints for repainting is not recommended. 15 l

Black (24.701)

Juno International Catalogue

15 l

Reddish brown (22.725)

Recommended to protect outdoor exposed steel surfaces. Good adherence on galvanised steel surfaces.

SHOP PRIMER

15 l

Grey (24.726)

Grey (21.855)

DYNAPOK THICK COAT PRIMER

15 l

Red (24.725)

Zinc Phosphate

Recommended for steel and iron surfaces, whenever efficient protection between sandblasting and calamine removing processes and the final paint application is desired. It also provides good results when applied to light-alloy based polished surfaces and copper and lead surfaces. It is recommended as primer for systems exposed to high temperatures up to 200 °C maximum. It provides over 15 micrometres per coat.

CHLORO-RUBBER PRIMER

Flameproof

Grey (22.722)

High adherence and quick drying two components primer epoxy. Based on a combination of phenolyc reactive polyvinyl-butiral resin and anti-corrosive pigments. Indoor or outdoor. Solvent (D-15) dilution and cleanliness.

5 kg

Recommended as a primer for POXEMYC and DYNAPOK systems, according to specifications.

EPOXI SHOP PRIMER

20 kg

Grey (24.714)

Red (24.712)

Colours are approximations and may vary once applied.

2.1.2.

High zinc content primers

ZIAMAR E.T. PRIMER 2 components

ZINC EPOXI PRIMER 2 components

High zinc content two components coating. Based on zinc-ethyl silicate with excellent corrosive and abrasion resistance, UV radiation resistance, temperature resistance (400 °C in continuous regime), resistance to alcohols (methyl, ethyl, butyl, amyl, glycerine), petrol derivatives (fuel oil, gas oil, gasoline, kerosene, white spirit, aromatic hydrocarbon), ketenes (methyl isobutyl ketene, amyl methyl ketene) and mineral oil resistance. E.T. solvent dilution and cleanliness.

Recommended as anti-corrosive primer for metal structures, bridges, tanks, silos, off-shore platforms, vessel hulls.

High zinc content two components coating. Based on epoxy resin pigmented with metallic zinc powder and cured with polyamide. The high zinc powder content isolates and inhibits metal from oxidation, providing cathode protection. Solvent (D-90) dilution and cleanliness.

Recommended as anti-corrosive primer in epoxy systems, to offer long-term protection for steel surfaces exposed to highly corrosive marine or industrial environments.

15 l

Greenish Grey (25.700)

15 l

Grey (22.800)

2.1.3.

INTA grey 164414 (22.805)

Middle coatings

DYNAPOK HBAC

High solid content two components epoxy coating. Solvent (D-90) dilution and cleanliness.

2 components

Recommended for surfaces where sandblasting is not recommended and manual cleaning is required instead. It provides over 125 micrometres per coat.

15 l

Aluminium (7.765)

DYNAPOK HB 2 components

White (7.760)

Thick coat two components epoxy coating. Based on epoxy resins and hardeners that provide excellent flexibility and abrasion-resistant hardness, waterproof properties and petrol, lube oils and similar products splashes resistance. Solvent (D-90) dilution and cleanliness.

Grey shades (7.76_)

Recommended as middle layer in DYNAPOK & POXEMYC systems and for previously primed ferrous surfaces exposed to aggressive and industrial environments, such as tanks, structures, lifting gear and transports. It provides 80-100 micrometres per coat. Micaceous grey (7.751) facilitates the second paint.

15 l

Micaceous grey (7.751)

2.2.

Enamels

2.2.1.

Enamels

DYNALINE S/R Quick drying

Grey (7.750)

Quick drying synthetic enamel. Based on alkyd resins. Solvent (D-17) dilution and cleanliness.

White (7.75_)

Recommended for the protection of all kinds of iron and steel surfaces, such as machinery, cranes, fencing, etc. Apply over a suitable anti-oxidant primer to prevent substrate corrosion, in order to achieve a fully guaranteed, long-lasting and effective protection. It’s recommended to repaint before 24 h. 15 l

Colours under request (2.898)

Colours are approximations and may vary once applied.

Juno International Catalogue

DYNADUR S/H Oven drying

Oven drying (110-150 °C) enamel. Based on glytherophthalic resins, urea formaldehyde resins and melamine resins hardeners, combined with inert pigments. Solvent (stove) dilution and cleanliness.

Recommended as widely use enamel with excellent mechanical and chemical properties. Apply preferably on pre-treated or primed surfaces. It combines easy application and quick drying at average temperatures while providing a smooth glossy finish. This enamel is suitable for any type of devices, especially serially produced, as due to its characteristics is ideal for series chain painting in applications (storage racks, instruments, metal cupboards, machinery parts, tools, etc.) 15 l

Colours under request (4.998)

DYNAMOL INDUSTRIA Metallic surfaces

DYNAMOL FLOORS

Chloro-rubber enamel with smooth satin finish. Based on chloro-rubber and non-saponifiable plasticers combined with pigments and inert extenders. It combines excellent chemical and mechanical resistance with easy to apply and quick drying properties. Indoor or outdoor. Solvent (D-40) dilution and cleanliness.

Recommended for the protection of metal structures exposed to marine or industrial environments where withstanding the action or occasional direct contact to aggressive, acid or alkali agents is required.

Chloro-rubber enamel with plastic finishing effect. Based on chloro-rubber and non-saponifiable plasticers Indoor or outdoor. Solvent (D-40) dilution and cleanliness.

Recommended for surfaces exposed to marine or industrial environments such as roads, garages, sport facilities, etc. It’s not suitable for asphaltic surfaces.

15 l

PAVIMYC FLOORS 2 components

White (09.500)

Pearl grey (09.533)

Black (09.501)

Jai-alai green (09.552)

Two components epoxy enamel for the protection of concrete pavements and metallic surfaces. Based on epoxy polyamide resins with excellent hardness and adherence while preventing the premature damage of concrete and dust. Indoor use. Solvent (D-90) dilution and cleanliness.

Tennis red (09.568)

15 l

British red (7.812)

2 components

15 l

Recommended for weathering exposed concrete floors in indoor car parks, garages, laboratories, chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. Also suitable for wooden floors.

DYNAPOK

Colours under request (9.799)

Green (7.814)

Two components epoxy enamel with great hardness and glossy finish. Based on epoxy polyamide resins with excellent properties against water, grease, acids or diluted alkali. Indoor use. Solvent (D-90) dilution and cleanliness.

Grey (7.807)

Recommended for metallic surfaces chemical and pharmaceutical plants, sugar and petrol refineries, electroplating, mechanical workshops, and in general for any type of old and new industrial floorings. It is also recommended to paint unpolished concrete floors.

15 l

White (7.700)

WATERBASED DYNAPOK 2 components

Two components waterbased epoxy enamel. Based on epoxy resin-reactive binder with a blend of pigments and load matter, and water dissolved hardener. Water dilution and cleanliness.

Colours under request

Recommended as general purpose industrial concrete coating for asphalt surfaces not sufficiently ventilated, where the application of conventional paints containing organic solvents would create a highly toxic atmosphere. Flameproof

B-s1,d0 15 l

White 9010 (7.900)

DYNAPOK EPOXIN S/D 2 components

White 9003 (7.910)

Anti-corrosive solvent-free two components epoxy. Based on epoxy resins with high chemical resistance, hardness and lack of any toxicity contamination.

Colours under request

Recommended for the interior protection of concrete or steel tanks and silos in food industries. Once the mixture is diluted, to be apply in less than 20 min.

White (7.952)

Juno International Catalogue

Red (7.950)

Colours are approximations and may vary once applied.

POXEMYC UV 2 components

Two components polyurethane enamel with great resistance to acids, solvents, abrasion, weathering, light, and even good resistance to heat (up to 150 °C). Based on hydroxilated acrylic resins combined with inert pigments and multipurpose aliphatic isocyanine hardener. Solvent (D-17) dilution and cleanliness. Flameproof

Recommended for metallic, concrete, wood, polyester with glass fibre or PVC surfaces, particularly where maximum ageing resistance is required, either to weathering, chemical agents or heat up to 150 °C. Ideal for wagons or cisterns, tanks, machinery, vessels, industrial buildings with aggressive atmospheres.

15 l

White (8.800)

DYNAVIL

Vinyl. Based on vinyl chloride and vinyl acetate copolymers with non-saponifiable plasticizers and inert pigments.

Colours under request

Recommended for painting and marking of textile or canvas surfaces.

2.2.2.

White (13.700)

Yellow (13.702)

Green (13.712)

Blue (13.705)

Red (13.711)

Aluminium Enamels

POXEMYC UV ALUMINIUM 2 components

Two components polyurethane enamel with smooth glossy finishing. Based on acrylic resins, inert pigments and hardeners with maximum resistance to the outdoor, UV and heat (up to 150 °C). Solvent (D-17) dilution and cleanliness.

Recommended for any metallic, wood, fibreglass or PVC surface that may require decorative finishing (facades, monuments) to be exposed to aggressive and industrial environments (tanks, structures, lifting gear and transports.

! Aluminium 9006 (8.824)

METALLIC ALUMINIUM

Aluminium enamel with smooth glossy finishing. Based on polyurethane modified resins and aluminium metallic powder. Solvent (D-40 or D-17) dilution and cleanliness.

Aluminium 9007 (8.847)

15 l

Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance.

15 l

Aluminium 9006 (5.802)

OUTDOOR ALUMINIUM

Aluminium enamel with smooth glossy finishing. Based on phenol resin and aluminium metallic powder. Solvent (D-45 or D-17) dilution and cleanliness.

Aluminium 9007 (5.807)

Recommended as finishing coat for all kinds of metallic surfaces, due to its anticorrosive and waterproofing properties and maximum humidity resistance. ! Aluminium (5.806)

FLAME ALUMINIUM

Thermo-stable metallic enamel. Based on silicone and alkyd resins pigmented with aluminium metallic powder. Solvent (D-17) dilution and cleanliness.

15 l

Recommended for the protection of metallic components exposed through long time periods to temperatures up to 650 °C. Note that painted surfaces can not be suddenly exposed to temperature rises as blisters may be formed, temperatures up to 350 °C must be gradually achieved instead.

15 l

Aluminium, not exceeding 350 °C (5.850)

DESOXIDINA ALUMINIUM

High temperature metallization process enamel. Based on urea formaldehyde and alkyd resins pigmented with aluminium metallic powder. Solvent (D-15) dilution and cleanliness.

Aluminium not exceeding 650 °C (5.851)

Recommended for marking areas on iron, steel, stainless steel or nickel surfaces which must be welded or assembled. It protects surfaces against oxidation by providing a protective action until the final casting and assembly. It is suitable for high temperature (600 °C) application, where the steel metal surfaces can not be sandblasted as it fixes aluminium to the metal substrate protecting it against oxidation and providing it with an aluminium metallic finish. !

15 l

Aluminium (5.805)

Colours are approximations and may vary once applied.

Juno International Catalogue

2.3.

Special industrial paints

2.3.1.

Intumescent paint WIP

2.3.2.

Waterbased intumescent (thermal-insulating) paint with fire-extinguishing properties. The paint reacts when exposed and in contact with fire, creating thermal-insulating intumescences and releasing fire-extinguishing salts which avoid the inflammation of combustible materials and delays the destruction of metallic structures, while maintaining its mechanical properties. Ready to use, do not dilute. Water cleanliness.

Recommended for the protection of steel structures in buildings, department stores, shops, hospitals, clubs, hotels, restaurants, offices, schools and any other facility where fire damage protection is needed. Official certification (LICOF) against fire: 30-60 minutes. 20 kg

White (89.050)

Bituminous paints

DYNAPOK ASPHALT 2 components

Bituminous two components epoxy paint. Based on epoxy resins with maximum resistance, adherence and mechanical properties. Solvent (D-90) dilution and cleanliness.

Recommended to protect metal surfaces under continuous or alternate immersion in fresh water or salt water, highly corrosive atmospheres, and aggressive alkali and moderately acid ic chemicals immersion. 15 l

Black (7.850)

ASPHALT MASTIC

Bituminous paint. Based on natural asphalts and petrol oxy asphalts combined with non-saponifiable resins and inert extenders. Solvent (D-17) dilution and cleanliness.

Recommended to provide protection for all kinds of substrates where appearance is not a key factor, such as containers and wagons, underground tanks or piping in direct contact with water or weathering, gates, bridges, ports, etc. It provides over 50 micron per coat. 15 l

Black (87.702)

2.3.3.

Antigraffiti varnish

ANTIGRAFFITI VARNISH

Two components polyurethane glossy varnish. Solvent (D-70) dilution and cleanliness.

2 components

Recommended to facilitate the cleaning process of graffiti on facades. The treatment must be applied in advance. 4l

Colourless (44.270)

Juno International Catalogue

since 1927

(03.0112/v1)