2011_minn_kota_catalog

Presorted Standard U.S. Postage

M i nn Kota M otors 12 1 Powe r D rive M an kato, M N 5 6 001

PAID Mankato, MN Permit No. 121

2011 CATALOG

Jo hnso n Outdo o r s Ma r i ne El e ctro n ic s , I n c .

1 2 1 Powe r D r ive

M a n kat o, M N 56 00 1

MINN KOTA CONSUMER & TECHNICAL SERVICE

MINN KOTA DEALER & DISTRIBUTOR SERVICE

JOHNSON OUTDOORS INC. CANADA

P.O. Box 8129 Mankato, MN 56002

Phone (800) 493-6686 Fax (800) 451-0387

121 Power Drive Mankato, MN 56001 Phone (800) 227-6433 Fax (800) 527-4464

555 Main Street, Suite 241 Racine, WI 53403 Phone (800) 299-2592 Fax (800) 631-6609

4180 Harvester Road Burlington, Ontario L7L 6B6 Phone (905) 634-0023 Fax (905) 634-0261

Humminbird, Maxxum, Minn Kota, Riptide and Vantage are registered trademarks of Johnson Outdoors Marine Electronics, Inc. AutoPilot, Bowguard 360°, CrabClaw, Cool Power, CoPilot, DeckHand, DualBeam PLUS, Endura, Fortrex, GlideFit, Grip Glide, i-Pilot, Maximizer, MicroTouch, Minn Kota Matched Systems, Neptune, PowerDrive, Quiet Power, Terrova, Tilt Twist Tiller, Traxxis, Trim-N-Troll, Ultimate Power, Vector, Weedless Wedge, Wide Track and 3X are trademarks of Johnson Outdoors Marine Electronics, Inc. Garmin is a registered trademark of Garmin International Inc. Lowrance is a registered trademark of Lowrance Electronics Inc. T-H Marine is a trademark of T-H Marine Supplies, Inc. WAGO is a registered trademark of WAGO Corporation.

Wall-Nut is a trademark of WAGO Corporation.

Specifications are subject to change without notice. ©2010 All Rights Reserved Printed in the U.S.A.

m in n kot a m ot o r s.co m

GPS-POWERED MOTORS. WIRELESS REMOTES. INTEGRATED SONAR TECHNOLOGY. YOU COULD ACCUSE US OF MAKING THINGS A LITTLE TOO EASY. BUT ALL WE CAN DO IS TAKE YOU TO THE FISH. IT'S UP TO YOU TO MAKE THEM BITE. WE JUST THINK YOU SHOULD SPEND MORE TIME ON THAT, AND LESS TIME STEERING AND POSITIONING YOUR BOAT. THAT’S WHY WE BUILD THE SMARTEST, TOUGHEST, MOST INTUITIVE MOTORS ON THE WATER.

AFTER THAT, YOU'RE ON YOUR OWN.

CONTENTS

Talon

4

Vantage Transom-Mount

22

Riptide SP Bow-Mount

40

Power Management

58

HOLD YOUR GROUND.

Advantage Minn Kota

6

Traxxis Transom-Mount

24

Riptide SF Bow-Mount

42

DeckHand Anchor Winches

59

Minn Kota Technologies

8

Endura C2 Transom-Mount

26

Riptide SM Bow-Mount

44

Accessories

60

i-Pilot

10

Pontoon Bow-Mount

28

Riptide SE Bow-Mount

46

Charger Selection Chart

64

INTRODUCING TALON, THE SHALLOW WATER ANCHOR THAT COULD ONLY COME FROM MINN KOTA®. SEE PAGE 4-5

Terrova Bow-Mount

12

E-Drive Electric Outboard

30

Riptide Transom-Mount

48

Talon Adapter Plate Selection Chart 64

PowerDrive V2 Bow-Mount

14

Advantage Minn Kota — Saltwater

32

Engine Mount Motor

50

Replacement Prop Chart

65

Fortrex Bow-Mount

16

AutoPilot/CoPilot — Saltwater

34

Trim Tabs

52

Trim Tab Product Specifications

65

Maxxum Bow-Mount

18

i-Pilot — Saltwater

36

Trim-N-Troll

54

Shaft Length Specifications

65

Edge Bow-Mount

20

Riptide ST Bow-Mount

38

On-Board Battery Chargers

56

Motor Selection Chart

66

ON THE WEB. Visit minnkotamotors.com to experience what makes a Minn Kota® a Minn Kota. You can tour the innovative features and technologies of each motor, and find your perfect trolling motor with our exclusive Select a Motor application.

Follow Minn Kota on Facebook, Twitter and YouTube for exclusive news and updates.

NEW TALON SHALLOW WATER ANCHOR THE FASTEST, STRONGEST, QUIETEST WAY TO POSITION YOUR BOAT IN SHALLOW WATER. GETS THERE.

RUNS QUIET.

Half the battle is hitting your spot precisely and staying there. Talon deploys quickly and automatically to get you in position, so you can get ready to reel ’em in.

Even with an arsenal of innovative features, Talon is designed to run quiet so it won’t scare fish.

Fast Deploy.

Talon’s spike deploys faster than the competition, getting you in position quickly and keeping you there.

Simple Design.

Built with minimal moving parts and no hinge points, Talon starts quiet and stays quiet.

Auto-Drive.

Talon delivers the strongest possible hold with Auto-Drive, which automatically powers the spike into the bottom with three successive hits, using increasing force on each hit.

Built-In Wave Absorption.

Talon enables your boat to move up or down without affecting the anchor. It uses a built-in floating suspension to keep you locked to the bottom, even in rough water conditions.

Rugged Anchoring Spike.

GUARANTEED FOR LIFE!

With composite fiberglass construction, the innovative spike on Talon is designed to withstand years of abuse with unmatched reliability.

In addition to an arsenal of speed and power features, we’ve made Talon easier and less costly to install, maintain and control.

Innovative Design.

Talon’s space-saving, lightweight design makes it as easy to install as a trolling motor, with no messy, complicated hydraulic pumps and hoses.

Versatile Adjustments .

A Minn Kota Quick Release Mounting Bracket enables Talon to slide up and down or pivot up to 30˚ to accommodate any transom angle.

You can also easily remove Talon when not in use.

Adapter Plates.

For non-direct transom installation, see page 64 for a full selection of adapter plates.

T

Rough Water Mode.

For an even stronger hold, activate Rough Water Mode, which performs three Auto-Drive sequences at ten second intervals.

BUILT SMARTER.

PIVO

2X Anchoring Force.

Talon is built with double the force of the competition, so you can power in for a secure hold and retract the anchor easily when it’s time to move.

Two-Stage Deployment.

Talon’s sequential, vertical deployment moves the spike quickly and quietly. It causes minimal disruption at the bottom and doesn’t interfere with your lines.

Noise Dissipation.

The innovative design prevents noise from being emitted below the water or through the hull, where the fish can hear it.

3 0˚

Talon doesn’t just anchor quicker, it anchors better. Even in currents and high winds, Talon holds steady.

STAGE ONE

STAYS THERE.

STAGE TWO

Auto Up/Down.

Deploy Talon by tapping a button on your wireless remote, so you don’t have to hold it down and wait.

SLIDES UP AND DOWN

Standard Wireless Remotes.

Two wireless remotes come standard to give you push-button control of Talon from anywhere on the boat.

Rugged Construction.

Talon is built with legendary Minn Kota toughness and reliability, and is fully resistant to the corrosive effects of saltwater.

LED Depth Indicator.

Track anchor depth at a glance, with LED lights on the unit that quickly show you how far down you’re deployed in one foot increments.

Deployment Notification Alarm.

If you turn your engine on while Talon is deployed, a Deployment Notification Alarm alerts you that the anchor is down.

Peace of Mind.

Talon carries a comprehensive two-year warranty — plus a lifetime warranty on the spike.

Available Models. (Maximum Depth) 6' 4" White 6' 4" Black 8' 4" White 8' 4" Black

4 5 _`

TALON HOLD YOUR GROUND. Boat control and positioning are everything. The quicker and more effectively you can position yourself on a bank, weedbed or flat, the better your chance of reeling in what you’re after.

Enter the all-new Talon. Our shallow water anchor deploys faster, holds stronger and outperforms competitors at every turn to change the way you think about boat positioning. It puts you on top of the fish and keeps you there, and it’s built with the legendary durability, precision and performance of a Minn Kota.

3 3 1

INDESTRUCTIBLE COMPOSITE SHAFT.

UP TO FIVE TIMES LONGER RUN TIME ON A SINGLE CHARGE.

Every aspect of a Minn Kota motor is thought out and rethought until it’s good enough to bear our name. What’s left is this set of legendary innovations.

For decades, Minn Kota’s Maximizer™ technology has given anglers the power to stay out on the water longer.

Instead of wasting energy with a constant flow of power, Digital Maximizer delivers only what’s needed: a precise amount of power at any setting – along with variable speed control – that optimizes draw to extend battery life and reduce damaging heat.

1

GUARANTEED FOR LIFE!

If we could offer a longer guarantee than “lifetime,” we would. Our ultra-high-yield composite shafts are pound for pound stronger than steel, virtually indestructible and can flex on impact before returning to their original position. They won’t kink, break, rust or corrode. Guaranteed.

4

WEEDLESS WEDGE ™ 2.

Only a Minn Kota can push weeds away and take on the thick stuff without batterydraining chopping and hacking. We’ve improved on the legendary Roland Martin design with swept-back, flared blades for unrelenting, reliable prop performance.

4

2

BOWGUARD 360°™ BREAKAWAY MOUNT. 2

This patented mount breaks away on impact from any angle, then automatically resets itself. You get uninterrupted fishing and an extra measure of safety from damaging your trolling motor or boat. Detaches for added portability and easy storage. Only from Minn Kota.

5

5

COOL, QUIET POWER. Nothing runs cooler or more quietly than Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power and longer motor life. Our unique bearing system reduces friction to cut fish-spooking noise. So quiet they’ll never hear you coming.

6 7 _`

ADVANTAGE MINN KOTA BETTER THAN IT HAS TO BE.

You don’t think too much about advanced digital microprocessing. Ultra-high-yield composite materials probably don’t dominate your dinner conversation. But these are just some of the things that work together to make our motors outperform and outlast any other trolling motor on the water. They’re the result of countless hours of research and testing, and they’re the advantages that allow a Minn Kota to truly take you “Anywhere. Anytime.”

COPILOT™

AUTOPILOT™

UNIVERSAL SONAR 2

GO REMOTE.

STAY THE COURSE.

GAIN SOME PERSPECTIVE.

Free yourself from the foot pedal and fish from anywhere on the boat, with the CoPilot™ wireless remote. With full control of prop on/off, speed and steering at your fingertips, you’re in total command of your trolling motor.

The compact, intuitive, waterproof remote comes with a neck lanyard and it also floats.

Point your motor head in the direction you want to travel. Activate AutoPilot™. Then get back to fishing. That’s how easy it is to stay on a heading with AutoPilot.

Step up to the streamlined, fully protected design of Universal Sonar 2. The transducer and wiring are completely concealed and protected from the elements, while shielded connectors virtually eliminate interference. No rigging required. No messy, exposed wires. Just crystal-clear sonar performance.

CoPilot for Terrova: For Terrova owners, CoPilot packs an extra punch. A high speed bypass button lets you hit full speed in an instant, and you can stay the course at the push of a button with AutoPilot activation. Add that to the long list of reasons to own a Terrova.

Its state-of-the-art compass system locks onto a heading, and keeps you on course while making continuous corrections for wind, waves and current. And while it’s navigating and positioning your boat, you’re free to fish.

The view you get is unlike any other, thanks to dual beam technology.* It scans the water using both 20° and 60° angles to give you an expanded view and better bottom detail.

Also features advanced temperature sensing.

Troll along a current line or over a shelf or ledge.

Just point the motor head where you want to go and AutoPilot will automatically adjust for wind, waves or current to pull the boat along the desired line.

Universal Sonar 2 is fully compatible with your favorite fishfinder. Just use a plug-in accessory adapter (page 60) to connect to interference-free, fully enclosed sonar performance.**

Run in place. To hover over schooling fish, adjust the speed of the motor against wind, waves or current.

AutoPilot will keep your boat headed in the same direction, allowing you to hover in place over a desired area.

High Speed Bypass (Terrova only)

** 200kHz and 200kHz/83kHz DualBeam PLUS compatible.

AutoPilot On/Off (Terrova only) Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right Actual Size

Shielded for Added Peace of Mind.

These shielded cable connectors virtually eliminate the possibility of sonar interference and they’re waterproof for extra dependability.

Troll parallel to the shoreline.

Point the motor at a distant landmark, parallel to the shore.

AutoPilot will maintain your heading until you choose to change your course.

60˚ 83kHz

Repeat a productive troll.

At the end of a run, rotate the motor head 180 degrees. AutoPilot will swing the boat completely around and take you back along the same course.

20˚ 200kHz

Get Universal Sonar 2 on Fortrex™, Terrova™ and PowerDrive™ V2 bow-mount motors. * Available on Humminbird® DualBeam PLUS™ and select Lowrance® and Garmin® units.

8 9 _`

MINN KOTA

TECHNOLOGIES The best motors in the world get even better when you equip them with our revolutionary boat control and sonar technologies. Take a look at the innovations that are changing the way people fish.

WIRELESS GPS TROLLING SYSTEM CRUISE CONTROL. i-Pilot’s cruise control function gives you unparalleled bait presentation, by maintaining your actual on-the-water speed (in miles per hour) and allowing you to adjust your speed in 1/10-mile-per-hour increments.

CHECK OUT ALL THE WAYS i-PILOT CAN HELP YOU CATCH MORE FISH. ™

RECORD A TRACK.

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

ADVANCED AUTOPILOT.

A

Simply push the Record button and fish along your desired course. i-Pilot will store that track to memory (up to three separate tracks). When you want to retrace a course, i-Pilot’s Playback functions will automatically guide your boat along the track.

Advanced AutoPilot uses GPS to take you exactly to the point you select, not just the bearing you choose. It’s the difference between a compass and a GPS unit. Just point the motor in the direction you want to travel, push a button and let it take you there with GPS accuracy while compensating for wind, waves, current and drift.

RECORD A TRACK: i-Pilot can record your track (A to B),

for up to two miles. To retrace your path in either direction, just press the Track to Start or Track to End buttons.

B COPILOT. Control speed, steering, on/off and high-speed bypass – our legendary CoPilot functions – from your i-Pilot remote. Free yourself from the foot pedal and fish from anywhere on the boat.

SPOT-LOCK.

THE REMOTE.

Spot-Lock works like an electronic anchor. Choose up to three separate spots for i-Pilot to remember, and at the push of a button, it will correct for wind or currents to hold you in place. Spot-Lock Recall lets you return to your spot later, from up to a quarter mile away.

i-Pilot’s clear, integrated, backlit LCD screen delivers instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength. All encased by a watertight, gasketed remote that floats if dropped. Includes lanyard and carabiner.

5 FT

SPOT-LOCK: Select your spot, and if you drift more than five feet away, i-Pilot will trigger your trolling motor to bring you back.

i-Pilot is available on Terrova and PowerDrive V2 bow-mount trolling motors either pre-installed or as an add-on accessory.

FEATURES MINN KOTA’S TWO-YEAR WARRANTY

Actual Size

10 11 _`

i-PILOT

THE NAVIGATION REVOLUTION. It’s simple: the less time you spend steering and positioning your boat, the more fish you can catch.

Enter i-Pilot™, which controls and steers your boat for you using GPS technology. Lock onto a fishing spot at the push of a button – and stay there. Record a successful path and retrace it later. Set cruise control for perfect bait presentation. All wireless, all with GPS accuracy, all with the sole purpose of making you a better angler.

MOTORS

STOW. DEPLOY. REPEAT.

AVAILABLE THRUST LEVELS

SO YOU CAN CATCH YOURS.

80

55

SPECIFICATIONS CONTROL ELECTRIC STEER SHAFT LENGTH 45", 48", 54", 60" PROP WEEDLESS WEDGE 2

13

B O W - M O U N T

TERROVA DESIGNED WITH NO LIMITS,

101

12

TERROVA

Simply depress the handle on the mount.

Fallaway ramps effortlessly deploy the motor into the water.

F R E S H W A T E R

Easy in. Easy out. Everyday. That’s the thought behind Terrova’s innovative stow/deploy mechanism. The balanced motor design makes stowing easy, and a master cut-off switch automatically turns off the power when stowed.

Available pre-installed on select models.

COMPOSITE SHAFT YES minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

More power. More innovation. More than enough strength and intelligence to take any obstacle and put it in its place. With up to 101 lbs of thrust and ingenious technologies like CoPilot, AutoPilot and i-Pilot, Terrova breaks the mold, so you can fish without limits.

ELECTRIC STEER FOOT PEDAL. i-PILOT WIRELESS GPS TROLLING SYSTEM. i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control and give you command of speed, steering and Advanced AutoPilot. Optimize your Terrova with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 10.

Terrova’s waterproof, low-profile foot pedal lets you take precise control with less than one degree of steering resolution.

Features IP68 waterproof rating.

AUTOPILOT KEEPS YOU ON COURSE. Digitally controlled AutoPilot uses a state-of-the-art compass to deliver you on any bearing you choose. Infinitely variable steering adjustments provide smoother course corrections and tighter heading accuracy against wind, waves and current. Included on select models. Also available as an add-on accessory, see page 60.

AutoPilot “ON”/“OFF” Momentary/Constant “ON”/“OFF” Heel/toe steering

GO REMOTE WITH COPILOT. Only the Terrova wireless CoPilot accessory lets you activate AutoPilot or reach maximum power at the push of a button. You can also take control of speed, steering and on/off command, from anywhere on the boat. For more information, see page 60.

Left steer Momentary on Right steer Infinite speed control Momentary on

MOTORS

DEPLOY-ASSIST LEVER. PowerDrive V2’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. Depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

65 55 50

45

B O W - M O U N T

SPECIFICATIONS CONTROL ELECTRIC STEER SHAFT LENGTH 48", 54", 60" PROP WEEDLESS WEDGE 2* POWER PROP*

POWERDRIVE V2

POWERDRIVE V2 HIGHLY EVOLVED.

70

15

F R E S H W A T E R

AVAILABLE THRUST LEVELS

14

Available pre-installed on select models.

COMPOSITE SHAFT YES minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES * Select models.

See motor selection chart on pages 66-67.

It’s been over 75 years since we introduced our first electric trolling motor. To say the technology has evolved since then is an understatement. Take PowerDrive V2, with big-time strength and innovative, ergonomic controls that have made it one of the most trusted names on the water. It’s not merely an upgrade. It’s an evolutionary leap.

i-PILOT WIRELESS GPS TROLLING SYSTEM. i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control and give you command of speed, steering and Advanced AutoPilot. Optimize your PowerDrive V2 with i-Pilot (available pre-installed or as an add-on accessory – replaces the foot pedal) for unprecedented automatic boat positioning. Learn more on page 10.

ERGONOMICALLY DESIGNED FOOT PEDAL. Control speed, steering, and momentary and constant on/off with PowerDrive V2’s foot pedal. It features the industry’s highest IP68 waterproof rating and an 18' cord. For optional foot pedals, see page 61.

Speed control Right

GO REMOTE WITH COPILOT.

Momentary/Constant “ON” switch

Enjoy the freedom to control speed and steering from anywhere on the boat with our wireless CoPilot remote. The compact, innovative accessory can be attached to a neck lanyard for easy access. For more information, see page 60.

Momentary button High-impact composite material Left

AUTOPILOT: READY. SET. FISH. Point the motor in the direction you want to go, then activate the AutoPilot button.

It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even against wind and waves.

MOTORS

THE MONO-ARM: YOUR SECRET WEAPON. Sometimes, the simplest solution is best. In this case, it’s a revolution. Fortrex’s innovative Mono-Arm Design features an extruded, anodized aluminum, structural beam that operates with no metal-to-metal contact and 75% less torsion. A single hinge point and rear pivot bearing with 20% more surface area deliver less wear, longer life and quieter operation than traditional motor mounts.

B O W - M O U N T

IN SOLITARY CONFINEMENT.

80

FORTREX

FORTREX THE ONLY MOTOR WE’VE EVER KEPT

101

17

F R E S H W A T E R

AVAILABLE THRUST LEVELS

16

SPECIFICATIONS CONTROL CABLE STEER SHAFT LENGTH 45", 52", 62" PROP WEEDLESS WEDGE 2 COMPOSITE SHAFT YES

minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

Why’d we leave Fortrex’s solid, extruded aluminum arm exposed? So everyone else on the water knows what they’re up against: the most ruthless motor we’ve ever unleashed. With fewer moving parts, tighter tolerances and less give, Fortrex is the beefiest, meanest, quietest motor ever. Consider yourself warned.

ILLUMINATED DIRECTIONAL INDICATOR. COUNTER-TENSION STABILIZER (CTS).

CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the water, that translates to a motor with no play, no give, reduced steering torque and silent operation.

Fortrex’s easy-to-read, illuminated directional indicator leaves no doubt about where you’re headed.

CABLE STEER FOOT PEDAL .

Speed control High-impact composite material

LIFT-ASSIST EASES STOW AND DEPLOY. Fortrex’s patented Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen gas-charged spring.

Momentary button Side-mounted Momentary/ Constant “ON” switch Heel block

REMOVABLE BOWGUARD 360°.

Lifting the motor and bowguard off of the mount is now even easier on Fortrex – just remove a single cap screw. The patented Bowguard 360°™ also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.

MOTORS

BOWGUARD 360°.

Our patented Bowguard 360° breaks away on impact from any angle, then automatically resets itself. You get uninterrupted fishing and an extra safeguard from damaging your trolling motor or boat. Detaches for added convenience.

80

70

55

B O W - M O U N T

SPECIFICATIONS CONTROL CABLE STEER/HAND CONTROL* SHAFT LENGTH 42", 52" PROP WEEDLESS WEDGE 2

MAXXUM

MAXXUM WHAT WE’RE MADE OF.

101

19

F R E S H W A T E R

AVAILABLE THRUST LEVELS

18

Available on select models.

COMPOSITE SHAFT YES minnkotamotors.com

DIGITAL MAXIMIZER YES* COOL, QUIET POWER YES * Select models.

See motor selection chart on pages 66-67.

You’re the first one on the water. And the last one off. That drive and determination are exactly what we built into Maxxum®. We’ve fortified the motor head with a new hybrid composite material that’s five times stronger than before. And both our foot control and hand control models feature tournament-tested power and innovative fishing features that were made with one purpose: keeping up with people like you.

WIRED TO THE WATER. DIGITAL MAXIMIZER ™.

By controlling the draw of power at variable speeds, Digital Maximizer lets you stay on the water up to five times longer on a single charge.

Maxxum has a foot pedal with ultra-responsive steering and an ergonomic design. There’s more room for your foot, and more precise speed control.

Speed control High-impact composite material Momentary button

ILLUMINATED DIRECTIONAL INDICATOR. Maxxum foot control models feature an easy-to-read, illuminated directional indicator. It delivers a clear reading in any light, so you know right where you’re headed.

Side-mounted Momentary/ Constant “ON” switch Heel block

MAXXUM ® HAND CONTROL. The Maxxum Hand Control motor features a comfortable Tilt/Extend Tiller handle that can both tilt (up to 45°) and extend (up to 6") for maximum control. And the motor head’s digital battery indicator lets you know just how much time you have left on the water.

MOTORS

ROCK-SOLID MOUNT. Tempered, marine-grade extruded aluminum provides an ultra-strong, lightweight mount. A positive rear stow latch provides rock-solid stowing for rough water runs and trailering, while a Latch & Door design makes removing your motor easy.

20

21

F R E S H W A T E R

EDGE

AVAILABLE THRUST LEVELS 55

45

B O W - M O U N T

EDGE TAKE IT TO THE LIMIT.

70

SPECIFICATIONS CONTROL CABLE STEER/HAND CONTROL* SHAFT LENGTH 36", 45", 50", 52" PROP WEEDLESS WEDGE 2* POWER PROP*

minnkotamotors.com

COMPOSITE SHAFT YES COOL, QUIET POWER YES

* Select models.

See motor selection chart on pages 66-67.

It’s just a trolling motor, right? Tell that to the guy who just lost a day of fishing fixing his cheap knock-off after it bowed down to a weed bed. Your motor shouldn’t get in your way, it should get things out of your way. That’s the philosophy behind Edge, our no-nonsense, nose-to-the-grindstone, everyday powerhouse with relentless durability.

CABLE STEER FOOT PEDAL .

INDESTRUCTIBLE COMPOSITE SHAFT.

GUARANTEED FOR LIFE!

Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

Get wired to the water with Edge’s foot pedal. It features ultra-responsive steering and an ergonomic design, with more room for your foot, and more precise speed control.

Speed control High-impact composite material Momentary button

DIRECTIONAL INDICATOR. An easy-to-read directional indicator is built into the top of the motor head on Edge foot control models. You’ll spend more time scanning the water and less time worrying about your motor.

Side-mounted Momentary/ Constant “ON” switch Heel block

EDGE HAND CONTROL MOTOR. Our 55- and 45-lb Edge models feature our Tilt Twist Tiller™.

The natural ergonomic grip gives you the ultimate in hands-on control for speed and steering. Shaft lengths in 45" and 52".

MOTORS

22

T R A N S O M - M O U N T

minnkotamotors.com

BREAKAWAY MOUNT. BACKTROLL IN AN INSTANT. AVAILABLE THRUST LEVELS 101

80

When the fishing calls for backtrolling, Vantage responds. Simply lift the directional indicator, rotate it 180° and set it back in place. It’s that fast and easy to change direction.

Unlike conventional transom mounts, the Vantage mounting system breaks away on impact. It’s easy to reset and protects your motor from unseen hazards.

SPECIFICATIONS MOUNT BREAKAWAY

180˚

180˚

With 4:1 articulated steering, rotating the lower unit 180° is as easy as moving the Tilt/Extend Tiller just 45°. Besides delivering maximum results with minimum effort, it stays out of the way of your outboard or kicker motor.

CONTROL TILT/EXTEND TILLER SHAFT LENGTH VARIABLE

MORE RESPONSE WITH LESS EFFORT.

45˚

45˚

PROP WEEDLESS WEDGE 2 DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

POWER TRIM/STOW AND DEPLOY — AUTOMATICALLY EASY. When depth and fishing conditions change, all you have to do is push a button to raise and lower the motor. It also automatically stows the motor at the end of the day or when you’re on the move.

DIGITAL MAXIMIZER. Digital Maximizer provides up to five times longer run time on a single charge. By controlling the draw of power at variable speeds, it eliminates wasted energy, extends battery life and gives you more time on the water.

VANTAGE

F R E S H W A T E R

VANTAGE INSTANT GRATIFICATION.

Get what you want, when you want it. With Vantage®, we’ve made it easier than ever to take control of stow and deploy, steering, and backtrolling. And with a convenient Tilt/Extend Tiller that extends to a full 31", effortless command is in your grasp.

23

MOTORS

24

T R A N S O M - M O U N T

minnkotamotors.com

ONE-HAND STOW. QUICK-LOCK CAM DEPTH ADJUSTER. Change depths simply and securely with Traxxis’ Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

AVAILABLE THRUST LEVELS 80

70

55

45

SPECIFICATIONS MOUNT ONE-HAND STOW

Available only on variable speed models.

CONTROL TILT/EXTEND TILLER SHAFT LENGTH 36", 42"

Available on select models.

VERSATILE STEERING TENSION CONTROL. The innovative collar above the Traxxis mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Traxxis in place, allowing for true vertical stowing.

PROP WEEDLES WEDGE 2* POWER PROP*

A TWIST ON HAND CONTROL.

COMPOSITE SHAFT YES

Traxxis’ innovative, comfortable Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") for maximum control to fit any style of fishing. It even includes a convenient digital battery indicator located right on the motor head.

DIGITAL MAXIMIZER YES* COOL, QUIET POWER YES

* Select models.

See motor selection chart on pages 66-67.

Traxxis’ remarkably simple, onehand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow the motor. Then when it’s time to go, use the easy-access thumb release to deploy Traxxis into any one of ten different positions.

TRAXXIS

F R E S H W A T E R

TRAXXIS SAY ‘GOODBYE’ TO THE STATUS QUO.

When the walleye are biting, you’d better be on the spot. All the well-positioned casts in the world don’t mean a thing if you can’t stay on the fish. That’s why every facet of the Traxxis™ was engineered to keep you in the game, no matter where the game takes you. It’s the ultimate in transom-mount trolling performance.

25

MOTORS

26

T R A N S O M - M O U N T

minnkotamotors.com

AVAILABLE THRUST LEVELS ENDURA C2 55 50 45 WATERFOWL 55 44

40

30

LEVER LOCK BRACKET.

WATERFOWL EDITION.

Our Lever Lock Bracket delivers a rock-solid mount that’s stronger than conventional brackets. Special composite materials resist flexing, warping and UV damage.

Built to keep you in the action when the shooting heats up, our Waterfowl Edition is available in 55- or 44-lb thrust levels. It features a Tilt Twist Tiller, indestructible composite shaft and Power Prop.

SPECIFICATIONS MOUNT LEVER LOCK BRACKET CONTROL TELESCOPING HANDLE* HAND CONTROL*

INDESTRUCTIBLE COMPOSITE SHAFT.

GUARANTEED FOR LIFE!

Pound for pound, our composite shaft is stronger than steel. It flexes on impact and will not break, kink or corrode. We’re the only ones who trust our trolling motor shaft enough to guarantee it for life.

SHAFT LENGTH 30", 36", 42" PROP POWER PROP COMPOSITE SHAFT YES COOL, QUIET POWER YES * Select models.

See motor selection chart on pages 66-67.

TELESCOPING HANDLE. Endura C2 features an ergonomic, six-inch telescoping handle for the most comfortable, convenient steering available.

TROLLING MOTOR POWER CENTER. Ideal for small boat, transom applications. Protects battery and allows connection with trolling motor leads without opening box. Displays current “state of charge.” See page 61.

ENDURA C2

F R E S H W A T E R

ENDURA C2 YOU CAN’T BEAT A TRUE ORIGINAL.

While others try to imitate it, we innovate it. Endura™ C2 is the legendary performer that’s built to explore, built to last and backed up with our two-year warranty. It’s the ultimate coming together of form and function, in a package that puts you on the water day after day, year after year – like no other.

27

MOTORS

ALUMINUM QUICK RELEASE BRACKET. Quickly, easily remove your PowerDrive V2 Pontoon motor with our aluminum bracket. It allows for maximum versatility and features a quiet, secure locking system. Standard on PowerDrive V2 Pontoon models.

28

POWERDRIVE V2 HAND CONTROL

68 54 70 55

B O W - M O U N T

SPECIFICATIONS CONTROL ELECTRIC STEER | HAND CONTROL SHAFT LENGTH PDV2 = 48" | HC = 52" PROP WEEDLESS WEDGE 2

i-Pilot compatible with PowerDrive V2 Pontoon models.

Available on Pontoon Hand Control models only.

minnkotamotors.com

COMPOSITE SHAFT YES DIGITAL MAXIMIZER PDV2 = YES | HC = NO COOL, QUIET POWER YES See motor selection chart on pages 66-67.

Harness the storied power of a Minn Kota trolling motor for your next cruise around the lake. PowerDrive V2 or Hand Control models give you quiet, steady, all-day performance. And with quick and easy mounting, you get a motor that’s built to let you sit back and appreciate a perfect day on the lake.

GO REMOTE WITH COPILOT. On our PowerDrive V2 Pontoon model, you can control speed, steering and on/off command from the palm of your hand. The compact, wireless CoPilot remote accessory allows you to navigate from anywhere.

PONTOON ENJOY THE RIDE.

PONTOON HAND CONTROL MOTOR. ERGONOMICALLY DESIGNED FOOT PEDAL. On our PowerDrive V2 Pontoon model, you can control speed, steering, and momentary and constant on/off with our ergonomic foot pedal. It features the industry’s highest IP68 waterproof rating and an 18' cord. For the optional wireless foot pedal, see page 61.

DECKHAND ™ PONTOON. Raise and lower the anchor at the touch of a button with the DeckHand™ Pontoon. It includes a DeckHand 40 remote switch for easy operation from anywhere on the boat.

Precisely, comfortably control speed and steering with the Hand Control motor's Tilt Twist Tiller. Available in 70- and 55-lb thrust levels.

Also features a compact mount to free up more deck space. Compatible with our Quick Release Brackets (page 61) and uses a Latch & Door design for easy depth adjustment and motor removal.

PONTOON

F R E S H W A T E R

AVAILABLE THRUST LEVELS

29

MOTORS

ELECTRONIC THROTTLE CONTROL FOR FINGERTIP RESPONSE. The ultra-responsive throttle lever has forward/neutral/reverse positions and push-button tilt up/down. Mounts either on the binnacle or side mount at the cockpit. Features key switch for added safety.

E-DRIVE

O U T B O A R D

A DAY ON THE LAKE.

31

E L E C T R I C

E-DRIVE THERE’S NOTHING LIKE

AVAILABLE ELECTRIC OUTBOARD HORSEPOWER

30

2 HP

SPECIFICATIONS MOUNT BOLT-ON TRANSOM CLAMP-ON TRANSOM* CONTROL BOLT-ON = OUTBOARD CABLE LINKAGE CLAMP-ON = TILT TILLER SHAFT LENGTH 20"

* Not rated for kicker motor application on gas engine powered fishing boats.

minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES

See motor selection chart on pages 66-67.

There’s no better way to enjoy the lake than with Minn Kota’s powerful E-Drive Electric Outboard motor.

On lakes with gasoline restrictions, the quiet 2 hp power plant will move a full-size pontoon boat up to 5 mph with no fumes, no emissions and no messy gasoline. Quiet. Clean. Built to run up to 2 hours at 100% on a single charge. Features a special tilt-lock mechanism for safe and secure trailering.

MINN KOTA ACTUATORS. A custom 12V DC motor powers our intelligently designed actuator on our E-Drive motors. It operates smoothly, quietly and dependably, and also features the industry’s highest IP68 waterproof rating.

TILT GAUGE.

REALTIME DIGITAL BATTERY GAUGE.

Dash-mounted tilt gauge provides an instant readout of motor position.

Not available on E-Drive Tiller model.

E-Drive features a back-lit Realtime Digital Battery Gauge, giving you an instant reading of how many hours of runtime you have remaining at your current speed. Also features a fuel gauge showing battery condition, as well as throttle power level.

E-DRIVE TILLER MOTOR. On gasoline-restricted lakes, the E-Drive Tilt Tiller motor provides primary propulsion with a comfortable, ergonomic Tilt Tiller. Features an easy-to-see, realtime battery gauge on the head and a clamp-on transom bracket that mounts easily to most aluminum V-hull boats.

E-DRIVE TILLER. Exclusive Tilt Tiller provides comfortable and convenient control.

UP TO FIVE TIMES LONGER RUN TIME ON A SINGLE CHARGE. 5-mil polyester paint

ADVANCED CORROSION PROTECTION. Riptide® motors are impervious to saltwater’s corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil polyester, powder coat paint. When it’s all done, you’re left with unequaled corrosion protection.

Zinc powder primer Anodized or dichromate armor plating Premium marine alloy cleaned with 7-step process

SILENT OPERATION. COOL POWER. Nothing runs cooler or more quietly than Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power and longer motor life. Our unique bearing system reduces friction to cut fish-spooking noise. So quiet they’ll never hear you coming.

Stay on the water longer with Digital Maximizer.

Instead of wasting energy with a constant flow of power, Digital Maximizer delivers only what’s needed: a precise amount of power at any setting – along with variable speed control – that optimizes draw to extend battery life and reduce damaging heat.

FULLY ENCAPSULATED ELECTRONICS. Marine-grade urethane fully encapsulates Riptide control boards to protect the 2 electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater.

1 1

2

INDESTRUCTIBLE COMPOSITE SHAFT. Minn Kota’s indestructible composite shaft is impervious to the corrosive effects of saltwater. Pound for pound stronger than stainless steel, will not break, kink or corrode, and does not contribute to galvanic corrosion. Guaranteed for life!

32 33 _`

RIPTIDE ST

RIPTIDE SP

RIPTIDE SF

RIPTIDE SM

RIPTIDE SE

RIPTIDE TRANSOM

Effortless stow/deploy and wireless control put you in command.

Ergonomically designed features for better control, with wireless navigation.

A revolutionary mount for the saltwater powerhouse.

The classic Minn Kota saltwater performer, with legendary ease of use.

A compact mount lets you add a trolling motor to smaller technical skiffs.

Our transom-mount saltwater beast never backs down.

ADVANTAGE MINN KOTA SALTWATER DOESN’T STAND A CHANCE.

We’ve stacked the deck against saltwater. Each component is saltwater tested and fortified with advanced processes and materials to resist corrosion. Whether you’re sightin’ snook from the platform or trolling for reds along the mangroves, the last thing you need is saltwater getting in your way. With Riptide, it never will.

AUTOPILOT: STAY THE COURSE. Constantly repositioning and redirecting your boat wastes valuable fishing time. That’s why our patented AutoPilot system (available on Riptide ST and SP motors) does the hard work of navigating for you. Lock AutoPilot onto your desired heading, and let it automatically and continuously make adjustments to keep your boat moving in the right direction.

Along current lines, or over shelves or ledges, AutoPilot will make automatic adjustments against wind, waves or current to continue to pull your boat in the desired direction.

WORKS HARD SO YOU DON’T HAVE TO.

Run “in place” over schooling fish, by using AutoPilot to adjust your motor against wind, waves or current – keeping you in prime position to reel ’em in.

AutoPilot’s state-of-the-art compass system locks onto a particular heading and automatically and continuously corrects itself against wind, waves and current to keep your boat moving in the right direction. Whether you’re picking your way through the mangroves or sight fishing on the flats, AutoPilot lets you spend less time worrying about navigating and more time focusing on reeling in the reds.

Troll parallel to the shoreline by activating AutoPilot to maintain your heading until you choose to change it.

SIMPLICITY AT ITS BEST. To use AutoPilot, just point the motor head in the direction you want to travel and let it take over. It uses a state-of-the-art compass system that automatically and intelligently steers your boat to keep you right in the strike zone.

Repeat a productive troll by rotating the motor 180° at the end of your run. AutoPilot will swing the boat around and retrace your path.

COPILOT: THE WORLD AT YOUR FINGERTIPS. There’s no need to clutter up you deck with a foot pedal when you arm yourself with the CoPilot remote.

CoPilot gives you the freedom to fish from anywhere on the boat – even the platform – and allows you to control on/off, speed and steering – all from the palm of your hand. Standard on Riptide ST and SP.

RIPTIDE ST COPILOT. GO REMOTE. CoPilot’s remote looks like a car’s keyless entry system – and it’s just as easy to use. The handheld, wireless remote is conveniently attached to a neck lanyard (included) for easy access, and the remote is completely waterproof and floats.

High Speed Bypass (Riptide ST only) AutoPilot On/Off (Riptide ST only)

In addition to being the most relentless saltwater motor on the market, Riptide ST uses a CoPilot remote with two exclusive features. The high speed bypass button lets you hit full speed in an instant, and you can also stay the course at the push of a button with AutoPilot activation.

Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right Actual Size

34 35 _`

AUTOPILOT & COPILOT TOTAL NAVIGATION AT THE PUSH OF A BUTTON.

Getting where you want to go is easy when you let our exclusive AutoPilot and CoPilot take over. AutoPilot locks on to a heading and stays on course with unmatched precision, even in the face of heavy waves, riptides or currents.

Our CoPilot remote gives you fingertip command from anywhere on the boat. We never run out of ways to help you tame saltwater – the most corrosion-resistant motors on the water are also the easiest to control.

WIRELESS GPS TROLLING SYSTEM CRUISE CONTROL. i-Pilot’s cruise control function gives you unparalleled bait presentation, by maintaining your actual on-the-water speed (in miles per hour) and allowing you to adjust your speed in 1/10-mile-per-hour increments.

HERE’S HOW i-PILOT MAKES YOU A BETTER FISHERMAN.

RECORD A TRACK.

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

ADVANCED AUTOPILOT.

A

Advanced AutoPilot uses GPS to take you exactly to the point you select, not just the bearing you choose. It’s the difference between a compass and a GPS unit. Just point the motor in the direction you want to travel, push a button and let it take you there with GPS accuracy while compensating for wind, waves, current and drift.

Simply push the Record button and fish along your desired course. i-Pilot will store that track to memory (up to three separate tracks). When you want to retrace a course, i-Pilot’s Playback functions will automatically guide your boat along the track.

RECORD A TRACK: i-Pilot can record your track (A to B),

for up to two miles. To retrace your path in either direction, just press the Track to Start or Track to End buttons.

B COPILOT. Control speed, steering, on/off and high-speed bypass – our legendary CoPilot functions – from your i-Pilot remote. Free yourself from the foot pedal and fish from anywhere on the boat.

SPOT-LOCK.

THE REMOTE.

Spot-Lock works like an electronic anchor. Choose up to three separate spots for i-Pilot to remember, and at the push of a button, it will correct for wind or currents to hold you in place. Spot-Lock Recall lets you return to your spot later, from up to a quarter mile away.

i-Pilot’s clear, integrated, backlit LCD screen delivers instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength. All encased by a watertight, gasketed remote that floats if dropped. Includes lanyard and carabiner.

5 FT

SPOT-LOCK: Select your spot, and if you drift more than five feet away, i-Pilot will trigger your trolling motor to bring you back.

i-Pilot is available on Riptide ST and Riptide SP bow-mount trolling motors either pre-installed or as an add-on accessory.

FEATURES MINN KOTA’S TWO-YEAR WARRANTY

Actual Size

36 37 _`

i-PILOT

THE NAVIGATION REVOLUTION. Don’t waste another minute positioning your boat. i-Pilot uses GPS technology to control your trolling motor for you so you can focus on fishing. It can lock onto a productive fishing spot and keep you there, remember a successful path, optimize your bait presentation with cruise control, and more. All with wireless control, GPS accuracy and the mission of making you better at what you love to do: catch fish.

MOTORS

STOW. DEPLOY. REPEAT. Easy in. Easy out. Everyday. That’s the thought behind Riptide ST’s innovative stow/deploy mechanism. The balanced motor design makes stowing easy, and a master cutoff switch automatically turns off the power when stowed.

Simply depress the handle on the mount.

Fallaway ramps effortlessly deploy the motor into the water.

38

80

55

B O W - M O U N T

RIPTIDE ST DROP IN UNEXPECTEDLY.

101

SPECIFICATIONS CONTROL WIRELESS COPILOT SHAFT LENGTH 48", 54", 60" PROP WEEDLESS WEDGE 2

Available pre-installed on select models.

COMPOSITE SHAFT YES minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

We put Riptide ST to the test, because we know you will. You need a motor that runs with a combination of stealth silence and unrelenting toughness. One that won’t spook fish, or back down from even the most extreme conditions. We know saltwater anglers never turn down a challenge. As it turns out, neither do we.

DIGITAL MAXIMIZER. i-PILOT WIRELESS GPS TROLLING SYSTEM. i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. Optimize your Riptide ST with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 36.

Up to five times longer run time on a single charge.

OPTIONAL FOOT PEDAL.

DIGITALLY CONTROLLED AUTOPILOT. Just point the motor where you want to go, and let AutoPilot take you there with unheard-of accuracy. Infinitely variable steering adjustments provide smoother course corrections and tighter heading accuracy. Included on select models. Also available as an accessory, see page 60.

AutoPilot “ON”/“OFF” Momentary/Constant “ON”/“OFF” Heel/toe steering

GO REMOTE WITH STANDARD COPILOT.

Left steer

Take total control of Riptide ST, from anywhere on the boat. The ST wireless CoPilot remote gives you the unique abilities to activate AutoPilot or instantly reach maximum power. And it features classic CoPilot controls like speed, steering and on/off command. It’s the only remote that can handle a motor this powerful.

Momentary on Right steer Infinite speed control Momentary on

RIPTIDE ST

S A L T W A T E R

AVAILABLE THRUST LEVELS

39

MOTORS

DEPLOY-ASSIST LEVER. Riptide SP’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. When you depress the lever, the motor deploys and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

55

RIPTIDE SP

B O W - M O U N T

RIPTIDE SP THE POWER TO BE COUNTED ON.

70

41

S A L T W A T E R

AVAILABLE THRUST LEVELS

40

SPECIFICATIONS CONTROL WIRELESS COPILOT SHAFT LENGTH 48", 54" PROP WEEDLESS WEDGE 2

Available pre-installed on select models.

COMPOSITE SHAFT YES minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

CoPilot wireless control comes standard. AutoPilot delivers you to any heading you choose.

Easy stow and deploy. Advanced corrosion protection. Riptide SP is saltwater-engineered and designed to keep you in position, on course and focused on what counts: reeling in more fish.

DIGITAL MAXIMIZER. i-PILOT WIRELESS GPS TROLLING SYSTEM. i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. Optimize your Riptide SP with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 36.

Up to five times longer run time on a single charge.

OPTIONAL FOOT PEDAL.* Speed control Momentary/Constant “ON” switch Right Momentary button

AUTOPILOT: READY. SET. FISH. Point the motor in the direction you want to go, then activate the AutoPilot button.

It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even through rough conditions.

High-impact composite material Left

GO REMOTE WITH STANDARD COPILOT. Control speed and steering from anywhere on the boat with our wireless remote.

It comes standard on Riptide SP. For more information, see page 35.

*Not compatible with i-Pilot.

MOTORS

THE REVOLUTIONARY MONO ARM. Sometimes, the simplest solution is best. In this case, it’s a revolution. Riptide SF’s innovative Mono-Arm Design features an extruded, anodized aluminum, structural beam that operates with no metal-to-metal contact and 75% less torsion. A single hinge point and rear pivot bearing with 20% more surface area deliver less wear, longer life and quieter operation than traditional motor mounts.

42

80

B O W - M O U N T

RIPTIDE SF THE ASSAULT ON SALT.

101

SPECIFICATIONS CONTROL HAND CONTROL SHAFT LENGTH 52", 62" PROP WEEDLESS WEDGE 2 COMPOSITE SHAFT YES

minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

Arm yourself with the ultimate weapon against saltwater. Riptide SF features fewer moving parts, tighter tolerances and our revolutionary Mono Arm for unwavering toughness. While features like an easy-to-use cam-lock depth adjuster make day-to-day operation easier, SF doesn’t give up an ounce of power, silence or rugged reliability. It’s everything you need to put the destructive effect of saltwater in its place.

DIGITAL MAXIMIZER. COUNTER-TENSION STABILIZER (CTS).

Up to five times longer run time on a single charge.

CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the water, that translates to a motor with no play, no give, reduced steering torque and silent operation.

A NEW TWIST ON HAND CONTROL. LIFT-ASSIST EASES STOW AND DEPLOY. Riptide SF’s patented Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen gas-charged spring.

REMOVABLE BOWGUARD 360°.

Lifting the motor and bowguard off of the mount is now even easier on SF – just remove a single cap screw. The patented Bowguard 360° also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.

Riptide SF’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

RIPTIDE SF

S A L T W A T E R

AVAILABLE THRUST LEVELS

43

MOTORS

A TWIST ON HAND CONTROL. Riptide SM’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

44

80

70

55

B O W - M O U N T

RIPTIDE SM SALTWATER’S NATURAL ENEMY.

101

SPECIFICATIONS CONTROL HAND CONTROL SHAFT LENGTH 42", 52", 62" Available on select models.

PROP WEEDLESS WEDGE 2 COMPOSITE SHAFT YES

minnkotamotors.com

DIGITAL MAXIMIZER YES* COOL, QUIET POWER YES * Select models.

See motor selection chart on pages 66-67.

Precision maneuverability. Accurate bait presentation. Meticulous speed control. You count on your trolling motor for a lot. And along the way, it has to fight corrosion, run quietly and perform with flawless reliability.

Riptide SM is the trusted powerhouse that meets those challenges head on, keeping you in position to make the catch of the day, every day.

DIGITAL MAXIMIZER. BOWGUARD 360°.

Up to five times longer run time on a single charge.

The patented Bowguard 360° mounting system features a heavy-duty, saltwaterengineered, corrosion-resistant stainless steel spring. It enables the mount to break away on impact from any direction, then automatically resets itself, protecting the motor and bow of boat from hidden obstacles. Detaches for added convenience.

Available on select models.

INDESTRUCTIBLE COMPOSITE SHAFT.

LATCH AND DOOR. Latch and Door models feature non-binding nylon inserts and anti-seize lubricant for a lifetime of trouble-free use. Removes quickly and easily for safe storage.

Available on select models.

QUICK-LOCK CAM DEPTH ADJUSTER. Change depths simply and securely with Riptide SM’s Quick-Lock cam adjuster.

It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

GUARANTEED FOR LIFE!

Pound for pound, SM’s composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode.

That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

RIPTIDE SM

S A L T W A T E R

AVAILABLE THRUST LEVELS

45

MOTORS

A TWIST ON HAND CONTROL. Riptide SE’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

46

55

B O W - M O U N T

RIPTIDE SE DON’T LET THE SIZE FOOL YOU.

70

SPECIFICATIONS CONTROL HAND CONTROL SHAFT LENGTH 52" PROP WEEDLESS WEDGE 2 COMPOSITE SHAFT YES

minnkotamotors.com

DIGITAL MAXIMIZER YES COOL, QUIET POWER YES See motor selection chart on pages 66-67.

With a compact mount that delivers in the clutch, Riptide SE lets you take advantage of Minn Kota’s trusted saltwater performance without sacrificing valuable deck space. Perfect for technical skiffs and flats boats, SE proves time and time again that bigger isn’t always better.

DIGITAL MAXIMIZER. ROCK-SOLID MOUNT.

Up to five times longer run time on a single charge.

Riptide SE’s ultra-strong, lightweight mount features a smaller footprint and tempered, marine-grade extruded aluminum construction. It stows securely in rough water with its positive rear stow latch; while a Latch & Door design makes removing your motor easy.

FIGHTS GALVANIC CORROSION.

QUICK-LOCK CAM DEPTH ADJUSTER. Change depths simply and securely with Riptide SE’s Quick-Lock cam adjuster.

It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

INDESTRUCTIBLE COMPOSITE SHAFT.

GUARANTEED FOR LIFE!

Pound for pound, SE’s composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

Galvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a patented sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that’s completely protected from saltwater’s destructive forces.

RIPTIDE SE

S A L T W A T E R

AVAILABLE THRUST LEVELS

47

MOTORS

48

T R A N S O M - M O U N T

minnkotamotors.com

ONE-HAND STOW. QUICK-LOCK CAM DEPTH ADJUSTER.

AVAILABLE THRUST LEVELS 101

80

55

50

Change depths simply and securely with Riptide Transom’s Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

45

SPECIFICATIONS MOUNT ONE-HAND STOW

Available only on variable speed models.

CONTROL HAND CONTROL SHAFT LENGTH 36", 42", 52"

Available on select models.

VERSATILE STEERING TENSION CONTROL. The innovative collar above the Riptide mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Riptide in place, allowing for true vertical stowing.

PROP WEEDLESS WEDGE 2* POWER PROP*

A TWIST ON HAND CONTROL.

COMPOSITE SHAFT YES

Riptide’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage.

A convenient digital battery indicator is located right on the motor head.

DIGITAL MAXIMIZER YES* COOL, QUIET POWER YES

* Select models.

See motor selection chart on pages 66-67.

Riptide Transom’s remarkably simple, one-hand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow. When it’s time to fish, use the easy-access thumb release to deploy Riptide into any one of ten different positions.

RIPTIDE TRANSOM

S A L T W A T E R

RIPTIDE TRANSOM SALTWATER JUST THREW IN THE TOWEL.

Riptide steps up to the rigors of saltwater and never backs down. Where lesser motors fold their tents and head home under pressure, Riptide brings it day after day. You simply cannot find a trolling motor better suited to give saltwater the ultimate staredown. End of story.

49

MOTORS

REMOTE SPEED CONTROL. Control the speed of your EM motor with an 18' corded remote control. It can be mounted or handheld, and offers infinite variable speed control in forward and reverse. Features neutral (off) detent position. The motor can be steered using the boat’s steering wheel or outboard tiller.

50

SPECIFICATIONS

160

VOLTAGE 12, 24, 36

101

80

55

PROP WEEDLESS WEDGE 2

SPEEDS (FWD/REV) VARIABLE

BRACKET COMPOSITE

FRESHWATER ENGINE MOUNT.

SALTWATER ENGINE MOUNT.

When it’s time to trade skis and wakeboards for rods and reels – Engine Mounts make sure you’re ready.

Our Saltwater Engine Mount motors put the corrosion-resistant power of Riptide on your boat without cluttering the deck.

ENGINE MOUNT

AVAILABLE THRUST LEVELS

See motor selection chart on pages 66-67.

minnkotamotors.com

Instantly transform your boat into a bona fide fishing machine without adding a motor to your deck.

Our Engine Mount (EM) motors can easily be implemented and won’t interfere with your boat or motor.

They’re perfect for slow maneuvering or picking your way through tight spots.

ENGINE MOUNT AT THE READY.

A DISCRETE, INTERFERENCEFREE MOUNT.

SEALED AND PROTECTED ELECTRONICS.

EM mounts on the cavitation plate of your outboard or I/O lower unit, with no stowing or deploying required. The motor stays out of sight, won’t interfere with your I/O motor, keeps your deck clear, and rides completely out of the water once you’re on plane.

EM electronics are housed in a fully waterproof control module mounted below the deck of the boat. All electronics are sealed in marine-grade polyurethane to provide corrosion-proof protection, and the extruded aluminum housing features specially designed fins that dissipate heat to keep things cool under high rpm use.

DIGITAL MAXIMIZER.

ENGINE MOUNT GUIDE.

By controlling the draw of power at variable speeds, Digital Maximizer eliminates wasted energy, extends battery life and gives you more time on the water.

• Minimum clearance required from spine of outboard to end of cavitation plate (see diagram).

• Cavitation plate to waterline 13" (minimum).

MINN KOTA ENGINE MOUNT MOTOR SELECTION CHART. BOAT LENGTH

14'

16'

18'

20'

22'

24'

55EM – 12V MOTOR SELECTION

= 7-1/4"

80EM – 24V 101EM – 36V 160EM – 24V

51

= 3" (80EM/101EM) 3-3/4" (55EM) = 13"

MOTORS

COMPOSITE TABS. Minn Kota’s Trim Tabs are injection molded for superior durability and corrosion resistance. Their unique contoured shape features a larger surface area and flared edges that channel water down the length of the tab, delivering exceptional lift performance. See page 65.

Tab 9 x 12

52

End View

53

TRIM TABS

TRIM TABS NOT THE FIRST, BUT THE BEST.

CHOOSING THE RIGHT TABS. To determine what size tabs will best fit your boat, consult this chart. The larger the tab size, the more lift they create.

As a rule of thumb, go with the largest tab size that your transom will accommodate.

12 x 18 12 x 12 12 x 9 9 x 18 9 x 12 9x9 16

18

20

22

24

26

28

30

32

34

36

38

40

42

44

46

minnkotamotors.com

14

BOAT LENGTH (FT)

We’ve always given you the power to go “Anywhere. Anytime.” Now we’re making the ride smoother, faster and more comfortable. Our corrosion-resistant, structural-grade Trim Tabs compensate for rough conditions to get you on plane faster, control list conditions and improve fuel economy. We didn’t invent Trim Tabs, we just perfected them.

KEEP AN EVEN KEEL. CONTROL AT THE FLIP OF A SWITCH. Our sealed, waterproof electronic switches put control at your fingertips. The Basic Rocker Switch provides up/down control of each tab, while the Indicator Switch adds one-touch auto up/ down controls and LED lights to display each tab’s position. Install an Auxiliary Switch to control tabs from a flybridge.

Basic Rocker Switch

Indicator Switch

Every boat has both a pitch axis – which spans the width of the boat – and a roll axis – which runs from bow to transom. Trim Tabs keep your boat aligned on both axes to prevent plowing and dipping, saving you fuel and creating a smoother ride.

PITCH AXIS High Bow Condition

ACTUATORS: THE DRIVING FORCE. A custom 12V DC motor powers our intelligently designed actuators, which control tab position with quiet, dependable smooth operation. They also feature the industry’s highest IP68 waterproof rating.

ITEM # 1863750 1863755

DESCRIPTION Short-Stroke Actuator Standard-Stroke Actuator

RETRACTED LENGTH 10.25" 11.50"

EXTENDED LENGTH TOTAL STROKE 12.65" 2.40" 15.00" 3.50"

LOWER BOTH TABS

ROLL AXIS Correcting Port Side List Condition

LOWER PORT TAB

RAISED STARBOARD TAB

MOTORS

CONTROL AT THE FLIP OF A SWITCH. Our Indicator Switch controls each tab independently and features an LED readout for instant feedback on each tab’s position. The auto up/down feature gives you one-touch control of the ultimate fishing system.

Indicator Switch

54

55

TRIM-N-TROLL

TRIM-N-TROLL™.

Get the proven performance of a Minn Kota motor mounted on our revolutionary Trim Tabs.

ITEM #

DESCRIPTION

THRUST

VOLTS

TAB SIZE

1863650

Complete Trim-N-Troll Kit

160 lb

24

9" x 12"

1863655

Complete Trim-N-Troll Kit

160 lb

24

12" x 12"

1863660

Complete Trim-N-Troll Kit

202 lb

36

9" x 12"

1863665

Complete Trim-N-Troll Kit

202 lb

36

12" x 12"

1863710

LED Indicator Switch

—

—

—

1863720

Auxiliary Switch

—

—

—

Indicator Switch and Trim Tabs must be purchased separately.

minnkotamotors.com

This fully integrated trim/troll system gives you the legendary performance of a Minn Kota motor with the control and efficiency of our Trim Tabs. Discreet design. Superior corrosion protection. The remote control freedom to fish on a clean and uncluttered deck.

TRIM-N-TROLL INNOVATIVE INTEGRATION.

ACTUATORS: THE DRIVING FORCE. A custom 12V DC motor powers our intelligently designed actuators, which control tab position with quiet, dependable, smooth operation. They also feature the industry’s highest IP68 waterproof rating.

ITEM # 1863750 1863755

DESCRIPTION Short-Stroke Actuator Standard-Stroke Actuator

RETRACTED LENGTH 10.25" 11.50"

EXTENDED LENGTH TOTAL STROKE 12.65" 2.40" 15.00" 3.50"

TRIM-N-TROLL REMOTE. Trim-N-Troll™ comes standard with a wireless remote. Control speed, steering and tab height, troll forward or backward, and use the exclusive return-to-center feature to maintain your course setting – even in the middle of a turn. Enjoy the freedom of control from anywhere on the boat, from the most comprehensive remote on the water.

Troll Up/Down Return-to-Center Forward/Reverse Steer Left On/Off Decrease Speed Increase Speed Steer Right

TRIM-N-TROLL COMPLETE KIT. Trim-N-Troll ships ready to fish with two 80- or 101-lb lower units, 2 long-stroke actuators, 2 Trim Tabs, a motor control unit, wireless remote, network splitter and indicator switch.

Mounting hardware included.

CHARGERS

56

NEW

MK 110D

ON-BOARD MARINE BATTERY CHARGERS

ON-BOARD MARINE BATTERY CHARGERS MORE POWER TO YOU.

MK 210D

minnkotamotors.com

NEW

NEW

MK 220D

NEW

MK 330D

MK 440D NEW MK 106D, MK 230D, MK 315D, MK 345D, MK 460D NOT SHOWN.

BATTERY CHARGER TEMPERATURE COMPENSATION

NEW ON-BOARD MARINE BATTERY CHARGERS.

absorption voltage

TWO TIMES FASTER CHARGING.

(output voltage)

BATTERY VOLTAGE

Reengineered with a microprocessor-based design, our all-new digital on-board chargers protect your battery, charge faster, and help you stay on the water longer.

15.5

15

In high temperatures, our new on-board chargers juice up your batteries up to twice as fast. Thanks to a digital design that monitors everything from temperature to state of charge, our new on-boards get the job done.

14.5

14 13.5

13 12.5

DIGITALLY CONTROLLED.

PROTECTS BATTERIES. Our new on-board chargers feature Multi-Stage Charging and Automatic Temperature Compensation for more precise charges that won’t damage your battery. And its automatic shut-off feature extends battery life by shutting down when charging is complete. So your battery – and your day on the water – will always last longer.

20

40

60

80

100

BATTERY TEMPERATURE (degree F)

Automatic Temperature Compensation.

Adjusts output voltage based on ambient temperature to ensure a full charge and protect your batteries.

ENHANCED STATUS CODES. Comprehensive readings on our new chargers inform you of the charge stage, maintenance mode status, any error notifications and full charge.

• Waterproof, shock- and vibration-resistant aluminum construction • Saltwater tested and fully corrosion-resistant • Short circuit, reverse polarity, arc and ignition protected • For use with 12V/6 cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only • FCC compliant • UL listed to marine standard 1236

M U LT I-S TAG E C H A R G I N G BULK

A M P S & V O LT S

We set out to build a smarter charger, and the result is the ingenious microprocessor-based design of our new on-board units. By monitoring factors like temperature and state of charge, they deliver a faster, more regulated precise charge – so you can stay on the water longer, without worrying about your batteries.

ABSORPTION

MAINTENANCE

V O LTS AM PS

MK 106D 1 BANK 6 AMPS OUTPUT 6 AMPS TOTAL OUTPUT

MK 110D 1 BANK 10 AMPS OUTPUT 10 AMPS TOTAL OUTPUT

MK 210D 2 BANKS 5 AMPS OUTPUT PER BANK 10 AMPS TOTAL OUTPUT

MK 2 10 20

220D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

MK 2 15 30

230D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

MK 315D 3 BANKS 5 AMPS OUTPUT PER BANK 15 AMPS TOTAL OUTPUT

MK 3 10 30

MK 3 15 45

MK 4 10 40

440D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

MK 4 15 60

460D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

T I M E (T H R E E S TAG E C H A R G E R )

Multi-Stage Charging.

Delivers the precise charge profile by automatically controlling current and voltage without overcharging your batteries.

330D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

57

345D BANKS AMPS OUTPUT PER BANK AMPS TOTAL OUTPUT

CHARGERS & ANCHOR WINCHES

M U LT I-S TAG E C H A R G I N G BULK

MULTI-STAGE CHARGING.

MAINTENANCE

A M P S & V O LT S

Minn Kota portable chargers feature multi-stage charging. In addition to providing up to 50% faster charge times, it also prevents overcharging and undercharging of your batteries by charging them in three distinct phases: bulk, absorption and maintenance. So you get a faster, more precise charge that protects the investment you’ve made in your batteries.*

ABSORPTION

*Available on portable and on-board marine chargers.

V O LTS AM PS

58

T I M E (T H R E E S TAG E C H A R G E R )

ON-BOARD DC ALTERNATOR CHARGER.

Choose the combination of banks, amps and total power output that suits you best – then take it with you.

Use your main engine to charge up your batteries on runs between fishing spots.

POWER MANAGEMENT & DECKHAND

PORTABLE CHARGER.

Serious anglers know that boat placement and control play as much a part in catching fish as any other factor. A Minn Kota trolling motor can take you to the fish, our DeckHand anchor winches can keep you there.

DECKHAND 40.

Why do all the work when a DeckHand will do it for you? These electric winches will automatically raise or lower your anchor at the touch of a button. A special anti-drag system senses the bottom to allow for controlled drifting.

• Davit can be mounted at base of DeckHand or in remote position on boat deck • 40-lb anchor capacity (anchor not included) • Pre-spooled with 100 feet of 800-lb test nylon rope • Universal davit stows anchor horizontally to eliminate anchor swing

MK 210P

MK 2 DC

PORTABLE & DC ALTERNATOR READY WHEN YOU ARE.

• Runs on 12-volt battery (not included)

ON-BOARD DC ALTERNATOR CHARGERS.

DECKHAND 25R.

Get power to go, with portable chargers that feature multi-stage charging to keep you on the water longer. Their innovative design prevents overcharging and undercharging to extend the life of your batteries.

Our DC Alternator Chargers utilize power from the main engine to help charge your trolling motor batteries. Each model features a waterproof, low-profile, corrosion-resistant design, and a master cutoff switch.

The DeckHand 25R has a 12-foot corded remote control to let you operate your DeckHand from anywhere on the boat.

• Fully automatic 3-stage charging (bulk, absorption and maintenance)

• LED display indicates power ON, charging, full charge and check connection • Short circuit and reverse polarity protection prevents chargers from operating if improperly connected to the battery • For use with 12V/6 cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only

• Charge-on-the-fly circuitry puts additional juice back in your trolling batteries on runs between fishing spots – turns off when engine stops • For use with 12 volt systems with 12V/6 cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only • Includes one 6-foot fused input cable and one 6-foot fused output cable

• UL listed to marine standard 1236

• FCC compliant

MK 105P * 1 BANK 5 AMPS OUTPUT 5 AMPS TOTAL OUTPUT

MK 110P 1 BANK 10 AMPS OUTPUT 10 AMPS TOTAL OUTPUT

MK 210P 2 BANKS 5 AMPS OUTPUT PER BANK 10 AMPS TOTAL OUTPUT

*Except the MK 105P, which charges in two stages (bulk and maintenance).

• 25-lb anchor capacity (anchor not included) • Includes davit for stowing most styles of anchors • Pre-spooled with 60 feet of 800-lb test nylon rope • Runs on 12-volt battery (not included)

• LED indicators display power-on, charging and check connection

• FCC compliant

MK 1 10 10

1 DC BANK AMPS OUTPUT AMPS TOTAL OUTPUT

DECKHAND DE E CK CKHA HAND ND 2 25.

5.

MK 2 DC 2 BANKS 10 AMPS OUTPUT PER BANK 20 AMPS TOTAL OUTPUT

See page 64 for specifications.

MK 3 DC 3 BANKS 10 AMPS OUTPUT PER BANK 30 AMPS TOTAL OUTPUT

25' cord allows you to operate the DeckHand 40 from anywhere on the boat (optional accessory).

DECKHAND STAY IN THE STRIKE ZONE.

PORTABLE CHARGERS.

*

DECKHAND 40 REMOTE SWITCH.

•2 25-lb 5 lb aanchor 5ncho nc hor capacity capa p city (anchor (an a ch c or not ot included) include d d) • IIncludes nclu nc lude dess davit for stowin ingg most styles of anchors stowing •P Pre re--spo p oled w ith 60 6 fee eett of 800-lb test nylon rope Pre-spooled with feet • Runs on 12-voltt battery bbatteery (not included)

DECKHAND PONTOON. Our DeckHand Pontoon includes a MKA-16-02 quick release bracket and MKR-12 quick connect plug.

Allows for fast, easy removal to clear the deck when needed. Also includes DeckHand 40 remote switch for convenient operation from anywhere on the boat.

minnkotamotors.com

• Anchor shackle allows for quick changes between anchors

59

ACCESSORIES

i-PILOT

POWERDRIVE FOOT PEDAL

The accessory for total boat control. i-Pilot uses GPS technology to store and retrieve locations and paths on the water, control speed and steering of your trolling motor, set cruise control for better bait presentation, and stay directly on a heading. Controlled by a compact, intuitive, fully protected remote. Neck lanyard and belt carabiner included for easy access.

See all of i-Pilot’s functions on pages 10-11.

Replacement MicroTouch™ foot pedal for PowerDrive and Riptide electric steer bow-mount motors.

60

RIPTIDE ST/TERROVA FOOT PEDAL

Available on Terrova, PowerDrive V2, Riptide ST and Riptide SP bow-mount trolling motors.

Low-profile design offers two steering options: heel/toe pedal or left/right steering buttons. Includes rotary speed control dial, momentary/constant on toggle, AutoPilot on/off toggle and 18' cable with IP68-rated waterproof connector plug. Plug-n-play with Riptide ST or Terrova motors and works in conjunction with CoPilot.

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

RIPTIDE SP/POWERDRIVE V2 FOOT PEDAL AUTOPILOT ACCESSORY

Side-to-side steering pedal includes momentary/constant on switch, speed control knob for precise adjustments and 18' cable with IP68-rated waterproof connector plug. Plug-n-play with Riptide SP or PowerDrive V2 motors and works in conjunction with CoPilot. Available corded or wireless.

INSTALLATION IS AS EASY AS 1-2-3…4.

Upgrade your Terrova with the easy-toinstall AutoPilot accessory. AutoPilot intelligently, automatically steers your trolling motor toward any heading you choose. It uses a patented, state-ofthe-art compass – correcting for wind, waves and current – to keep your boat on course.

CORDED

MKA-23

RTA-19

AUTOPILOT LETS YOU: • Troll along a current line or over a shelf or ledge • Hover in place over school fish • Troll parallel to the shoreline • Repeat a productive troll

WIRELESS

Available as an add-on, plug-in module for Terrova bow-mount trolling motors.

1

2

3

4

Remove control head cover.

Position the tray over the exposed control head and lock into place.

Connect the AutoPilot and network cable, remove tray.

Reattach control head cover and you’re on your way.

COMPOSITE QUICK RELEASE BRACKETS

(MKA-21, MKA-23, RTA-17, RTA-19)

Easily remove any Terrova, PowerDrive V2, PowerDrive or Pontoon Hand Control (MKA-21); Fortrex, Maxxum, Maxxum Pro, All Terrain or Edge (MKA-23); Riptide ST or Riptide SP (RTA-17); or Riptide SF, Riptide SM or Riptide SE (RTA-19) bow-mount motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (not included).

Trolling motor attaches to top of bracket. Bracket locks in over top of deckmounted center puck.

MKA-21

RTA-17

UNIVERSAL SONAR 2 ADAPTERS ADAPTER PLATE FOR COMPOSITE QUICK RELEASE BRACKETS Center puck not included with adapter plates.

MKA-22

*200kHz and 200/83kHz DualBeam PLUS compatible.

Cover included with quick release bracket.

60˚ 83kHz

20˚ 200kHz

Shielded for Added Peace of Mind.

These shielded cable connectors virtually eliminate the possibility of sonar interference and they’re waterproof for extra dependability.

Control speed, steering and on/off from anywhere on the boat with the CoPilot wireless remote. The handheld, waterproof remote is conveniently attached to a neck lanyard for easy access and also floats.

ELECTRIC STEER QUICK RELEASE BRACKET WITH COVER

(MKA-32)

Quickly remove any Terrova, PowerDrive V2 or PowerDrive bow-mount trolling motor. Cam-lock design and ultra-tight tolerances eliminate bracket movement and noise. Locking lever includes pin and lanyard. Upper and lower plates can be secured with padlock (not included). Composite cover attaches to lower half of bracket when motor is removed, keeping the deck profile clean.

MKR-US2-1 MKR-US2-8 MKR-US2-9 MKR-US2-10 MKR-US2-11

Garmin Humminbird 7-pin Lowrance 6-pin/Eagle Blue Lowrance Universal Sonar 2 Extension Cable

MKA-32

MKA-42

WIRELESS COPILOT

(MKA-22)

Allows hole patterns from previously mounted motors to be used with composite brackets (MKA-21 and RTA-17). Ideal for carpeted deck surfaces.

High Speed Bypass (Terrova/Riptide ST only)

MKA-16-02

ALUMINUM QUICK RELEASE BRACKETS

(MKA-16-02, MKA-42, MKA-52/62)

For easy, quick removal of any Terrova, PowerDrive V2, PowerDrive (MKA-16-02); Fortrex or Maxxum (MKA-42, MKA-52/62) bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. MKA-42 fits 42" shaft foot control motors, 42" and 52" shaft hand control motors. MKA-52/62 fits 52" and 62" shaft foot control motors and 62" shaft hand control motors.

AutoPilot On/Off (Terrova/Riptide ST only) Steer Left

TROLLING MOTOR POWER CENTER

Propeller On/Off

For small boat, transom applications, these easy access external battery terminals allow trolling motor leads and charger leads to be connected without opening the box. Built-in battery meter includes two 12-volt accessory plugs, and 2 manual reset circuit breakers (15 amp for accessory plugs and 60 amp for trolling motor). Fits group 24- and 27-size batteries.

Decrease Speed Increase Speed Steer Right

TWO ADDITIONAL BUTTONS, ENDLESS OPTIONS.

Each CoPilot system includes: receiver, key-fob remote and neck lanyard.

On Terrova and Riptide ST, CoPilot adds two extra features: reach maximum speed in an instant with the high speed bypass button, and get one-touch AutoPilot activation.

Available on the following motors: • Wireless CoPilot for Terrova • Wireless CoPilot for PowerDrive, Riptide with AutoPilot and PowerDrive V2

Actual Size

WIRELESS ACCESSORIES (NOT SHOWN): Wireless Foot Pedal (PowerDrive or PowerDrive V2 CoPilots), Replacement CoPilot Remotes

DIGITAL BATTERY METER

(MK-BM-1D)

Monitor the voltage level and “state of charge” of any 12-volt battery with an LCD display mounted on a compact frame that’s easy to store anywhere. Includes LEDs that indicate full, 2/3, 1/3 or 0 “state of charge.”

minnkotamotors.com

Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your motor to your favorite brand of sonar or fishfinder* with IP68-rated waterproof connectors.

61

ACCESSORIES

AC POWER PORT

MKA-43 -43 25"

(MKR-21, MKR-23)

Our convenient adapter allows quick thru-hull connection to an AC extension cord using the male AC plug from any of our chargers. No cutting or splicing required. The watertight cover and gasket prevent corrosion on the AC plug when it isn’t in use.

MKR-23 AC POWER PORT SALTWATER

MKA-44 40"

TELESCOPIC EXTENSION HANDLES

(MKA-43, MKA-44)

Simply twist the handle to loosen, adjust and tighten our extension handles. Go from 17" to 25" (MKA-43) or 24" to 40" (MKA-44) and experience total speed and steering control in any situation. Fits all outboard and trolling motors.

MKR-21 AC POWER PORT FRESHWATER

62

TROLLING MOTOR QUICK CONNECT

(MKR-12)

MKA-18

For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.

MKA-7

CIRCUIT BREAKER

EXTENSION HANDLES

(MKA-7, MKA-18)

Provides easier steering and speed control for all hand control motors. Available in 18" (MKA-18) or extra-long 30" (MKA-7) models.

WEEDLESS WEDGE 2 PROP

(MKR-19)

Protects trolling motor from electrical damage. 60 amp rating with manual reset. Fully waterproof.

Compatible with all 12-, 24- and 36-volt systems.

CHARGER OUTPUT EXTENSION CABLES

(MK-EC-15)

Extension cables are ideal when standard charger cables will not reach bow, center or transom battery compartments. Features WAGO® Wall-Nut™ quick connectors (UL listed). Fused (30 amp) positive and negative leads. Available in 15' length.

WEEDLESS WEDGE PROP

(MKR-20)

(MKP-6, MKP-7, MKP-8, MKP-24)

100% weedless. Unique, patented design pushes weeds away to conserve battery power. Easily moves through heavy vegetation, even at slow speeds. See page 65.

POWER PROP TROLLING MOTOR QUICK CONNECT PLUG

(MKP-32, MKP-33)

Swept-back and flared blades push weeds away even better than the original Weedless Wedge™.

Delivers improved efficiency through the heaviest vegetation, at any speed. See page 65.

(MKP-2)

Delivers extra power to push through heavy vegetation. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters. See page 65.

Heavy-duty connector has positive snap-lock design for 6- to 12-gauge wire. Kit includes two plug halves, four contacts and four solder plugs for securing wire leads into the contacts (wire not included).

PROP NUT KIT

(MKP-9, MKP-10, MKP-11, MKP-23, MKP-34)

Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota prop dimensions (3/8", 1/2" and 5/16"). Requires crescent wrench for installation.

MKR-18A

(MKR-18/MKR-18A)

Universal design for 2- or 3-wire configurations on 12- to 36-volt systems. Watertight sealing cap and corrosion-resistant electrical components. Requires standard 1-1/8" diameter mounting hole. MKR-18A allows for 6-gauge wire connection.

TRANSDUCER MOUNTING KIT

(MKR-15)

Allows mounting on lower unit of bow- or transom-mount motors. Rugged, durable construction.

Fits transducers of all major manufacturers.

MKR-18

BATTERY CONNECTORS

(MK-BC-1)

Patented design is ideal for installing batteries in tight, confined places. Easy to disconnect for quick, convenient charging. Plastic cover eliminates risk of electrical shock.

QUICK NUTS

(MKR-8)

Allows for mounting motor/accessories where there is limited space or no access from below (as required by standard nuts and bolts).

BOW-MOUNT STABILIZER KIT

(MKA-4)

Reduces bounce on Maxxum Pro, Maxxum, Riptide Pro and Riptide SM bow-mount motors.

Attaches to the top side of the upper arm of the scissors mount. When motor is stowed, the stabilizer is positioned vertically between the upper arm of the bracket and the deck of the boat.

Rubber bumper protects deck finish.

BOW-MOUNT STABILIZER KIT

(MKA-34)

Every tool you need to maintain your Minn Kota motor is contained within this stainless steel multi-tool.

Pliers, sockets, screw drivers, hooked awl, file, knife, wire cutter/crimper and scissors help you do everything from wiring to prop maintenance.

(MKA-29)

Fit any Maxxum Pro, Maxxum, Riptide Pro or Riptide SM bow-mount trolling motor. Fits between upper and lower arm of mounting bracket. Pivots into vertical position when motor is stowed to reduce bounce from heavy chop or wake. Rotates into horizontal position along side upper arm when motor is deployed. Saltwater tested and fully resistant to corrosion.

ROPE AND HANDLE

TROLLING MOTOR MULTI-TOOL

DRIFT SOCK

(MKA-26, MKA-27)

Slows down your drift to enable proper bait presentation over holding fish. Both models are 34" deep and 22" in diameter, with four heavy-duty, 1" nylon straps. The MKA-27 uses built-in weights and floats to open automatically in the water, and features stronger, 420 denier ripstop nylon.

Drift Sock works against wind and current to improve bait presentation over holding fish.

(MKA-45)

For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion resistant 48" nylon rope.

DRIFT SOCK HARNESS

(MKA-28)

7' harness allows sock to be quickly released without tangles while fighting fish. Attaches to any cleat with a 12" sewn loop and a quick connect clip.

minnkotamotors.com

TROLLING MOTOR PLUG AND RECEPTACLE

63

CHARTS

REPLACEMENT PROP SELECTION CHART

PICK THE RIGHT CHARGER, AS EASY AS 1-2-3.

WEEDLESS WEDGE 2 PROPS 12 volt

STEP 1 Determine how many charging banks your trolling system requires.

You need one charging bank for each battery (include your starting battery, if appropriate).

STEP 2 Determine the speed of recovery/recharging time you require.

12 volt

12 volt

12 volt

12 volt

12 volt

12 volt

12 volt

12 volt

12 volt

1 battery = 1 charging bank

2 batteries = 2 charging banks

3 batteries = 3 charging banks

4 batteries = 4 charging banks

3 - 5 HOURS RECOVERY TIME = 15 AMPS PER BANK

4 - 6 HOURS RECOVERY TIME = 10 AMPS PER BANK

10 - 12 HOURS RECOVERY TIME = 5 OR 6 AMPS PER BANK

WEEDLESS WEDGE 2 The next generation of the industry’s only 100% fully weedless prop. Swept-back, flared blades “wedge” weeds away, allowing you to pass through heavy vegetation at any speed, without draining valuable battery power.

MOTOR MODELS WITH SERIAL NUMBER PREFIX “WW,” “J” OR “K” MKP-33 #2331160 TERROVA 80, TERROVA 80/US2, TERROVA 80/AP, TERROVA 80/AP/US2, TERROVA 101, TERROVA 101/US2, TERROVA 101/AP, TERROVA 101/AP/US2, PROP NO.: MOTOR DIA.: 4" MAX 80, MAX 80/BG/US2, MAX 80/US, MAX 101, MAX 101/US, MAX 101/H, MAX PRO 80, MAX PRO 80/BG/US2, MAX PRO 80/US, MAX PRO 101, PROP NUT KIT: “E” MAX PRO 101/BG/US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80PD/US, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80, VANTAGE 101, RT80/ST/CP, RT80/ST/CP/AP, RT101/ST/CP/AP, RT PRO 80, RT PRO 101, RT80/SM/L&D, RT80/SM/BG, RT101/SM/BG, RT80/B, RT80/B/L&D, RT80/S, RT101/B, RT101/S, RT80/AP, MK80EM, MK101EM, MK160EM, MK202EM, RT80EM, RT101EM, RT160EM, RT202EM, RT101/SF, RT80/SF, FORTREX 101/US2, FORTREX 101, FORTREX 80/US2, FORTREX 80, TRAXXIS 80, ALL TRIM-N-TROLL KITS WEEDLESS WEDGE PROPS

Select the Minn Kota charger that best meets your needs from chart below.

LENGTH

WIDTH

HEIGHT

WEIGHT (LBS)

# OF BANKS

OUTPUT PER BANK (AMPS)

TOTAL OUTPUT (AMPS)

RECOVERY TIME* (HOURS)

1821065

MK 106D On-Board Charger

8-3/4"

4-3/4"

3"

4.5

1

6

6

10-12

1821105

MK 110D On-Board Charger

10-1/2"

7-1/2"

4"

10

1

10

10

4-6

1822105

MK 210D On-Board Charger

11-1/2"

7-1/2"

4"

11

2

5

10

10-12 10-12

1823155

MK 315D On-Board Charger

12-1/2"

7-1/2"

4"

14

3

5

15

1822205

MK 220D On-Board Charger

13-1/2"

7-1/2"

4"

15

2

10

20

4-6

1823305

MK 330D On-Board Charger

16-1/4"

7-1/2"

4"

20

3

10

30

4-6

1824405

MK 440D On-Board Charger

11-3/4"

6-3/4"

8"

22.5

4

10

40

4-6

1822305

MK 230D On-Board Charger

11-3/4"

6-3/4"

7"

16.6

2

15

30

3-5

1823455

MK 345D On-Board Charger

11-3/4"

6-3/4"

8"

22

3

15

45

3-5

1824605

MK 460D On-Board Charger

14-1/2"

6-3/4"

8"

31

4

15

60

3-5

EXCLUSIVE WEEDLESS WEDGE PROPS The patented Weedless Wedge is the only 100% weedless prop in the history of fishing.

The leading edge on each propeller blade is shaped with a swept-back edge that always meets at an angle of less than 45 degrees. “Wedges” weeds away from the hub – even at slow fishing speeds.

MKP-8 #2331120 MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K” PROP NO.: 74PD, 74PD/AP, 74PD/AP/US, MAX 74, MAX 74/US, MAX 74/H, 64PD, VANTAGE 74 4" MOTOR DIA.: PROP NUT KIT: “B” MKP-24 #2331130 MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K” PROP NO.: MAX 101, MAX 101/H, VANTAGE 101, RT101/S, RT101/S/3X, RT101/B, RT101/B/H, RT101/B/BG/3X, VECTOR 101/3X 4" MOTOR DIA.: PROP NUT KIT: “D” POWER PROPS

MKP-37 #2091170 PROP NO.: ENDURA C2 55, ENDURA C2 50, CAMO 55, TRAXXIS 70, TRAXXIS 55/SC, TRAXXIS 55, RT55/T, RT50/SC/T 3-5/8" MOTOR DIA.: PROP NUT KIT: “A” For a complete compatibility chart, go to minnkotamotors.com.

TRIM TAB PRODUCT SPECIFICATIONS

ON-BOARD ALTERNATOR CHARGER PRODUCT SPECIFICATIONS LENGTH

WIDTH

HEIGHT

WEIGHT (LBS)

# OF BANKS

OUTPUT PER BANK** TOTAL OUTPUT** (AMPS) (AMPS)

RECOVERY TIME* (HOURS)

1821031

MK 1 DC On-Board Alternator Charger

7"

7-1/4"

3-1/2"

5

1

10

10

***

1821032

MK 2 DC On-Board Alternator Charger

10-1/2"

7-1/4"

3-1/2"

6.5

2

10

20

***

1821033

MK 3 DC On-Board Alternator Charger

14-1/2"

7-1/4"

3-1/2"

8.5

3

10

30

***

OUTPUT PER BANK (AMPS)

TOTAL OUTPUT (AMPS)

RECOVERY TIME* (HOURS)

*Approximate time to restore deep cycle batteries at 60% discharge. **Dependent on alternator output. ***Dependent on alternator output and amount of time engine runs.

PORTABLE CHARGER PRODUCT SPECIFICATIONS ITEM #

DESCRIPTION

LENGTH

WIDTH

HEIGHT

WEIGHT (LBS)

# OF BANKS

1821051

MK 105P Portable Charger

5"

7"

6-1/2"

3.4

1

5

5

10-12

1820110

MK 110P Portable Charger

7"

9"

7-3/4"

6.5

1

10

10

4-6

1822110

MK 210P Portable Charger

7"

9"

7-3/4"

6.7

2

5

10

10-12

ITEM #

DESCRIPTION

1863500 1863510 1863515 1863520 1863530 1863540 1863545 1863550 1863750 1863755 1863700 1863710 1863720

9" x 9" Tabs (no actuators/no switch) 9" x 12" Tabs (no actuators/no switch) 9" x 12" Trim Tab Kit (tabs, standard stroke actuators, Basic Rocker Switch) 9" x 18" Tabs (no actuators/no switch) 12" x 9" Tabs (no actuators/no switch) 12" x 12" Tabs (no actuators/no switch) 12" x 12" Trim Tab Kit (tabs, standard stroke actuators, Basic Rocker Switch) 12" x 18" Tabs (no actuators/no switch) Short Stroke Actuators (11" min. transom height) Standard Stroke Actuators (15" min. transom height) Basic Rocker Switch (includes Control Module) Position Indicator Switch (includes Control Module) Auxiliary Switch

minnkotamotors.com

DESCRIPTION

APPLICABLE MOTOR MODELS

MKP-2 PROP NO.: #2061121 CLASSIC 28, EDGE 45, EDGE 45/H, ENDURA 30, ENDURA 36, ENDURA 38, ENDURA 40, ENDURA 45, RT40/SC, ENDURA PRO 32, ENDURA PRO 38, MOTOR DIA.: 3-1/4" 45PD V2, RT45/SC/T, TRAXXIS 45/SC, TRAXXIS 45 PROP NUT KIT: “A”

*Approximate time to restore deep cycle batteries at 60% discharge.

ITEM #

APPLICABLE MOTOR MODELS

MOTOR MODELS WITH SERIAL NUMBER PREFIX “MK,” “J” OR “K” MKP-7 #2091150 MAX 55, MAX 55/H, MAX 55/SC, MAX 50T, MAX 55T, 65PD, 50PD, 55PD, 55PD/AP, 55PD/US, 55AP, 55AP/US, 65AP, 65PD/AP, 65PD/US, 65AP/US, PROP NO.: 3-5/8" MOTOR DIA.: 54PD PONTOON, 64PD PONTOON, RT55/B/SC/L&D, RT55/SC/H, RT55/AP, RT50/S, RT50/S/SC, RT55/S*, ENDURA 42, ENDURA 44, ENDURA 46, PROP NUT KIT: “A” *Refer to original prop on motor ENDURA 50, ENDURA 55, ENDURA PRO 46, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 65, VECTOR 65/3X

ON-BOARD DIGITAL CHARGER PRODUCT SPECIFICATIONS DESCRIPTION

The right tab size for your boat will be determined by a number of factors, including boat length and weight. The larger the tab size, the more lift they create. As a rule of thumb, go with the largest tab size that your transom will accommodate. See chart below for general guidelines.

BOAT LENGTH (FT)

12 x 18

*Approximate time to restore deep cycle batteries at 60% discharge.

12 x 12

HOW WILL YOU MOUNT YOUR TALON?

12 x 9 9 x 18

Adapter bracket between outboard and transom.

Adapter bracket between jackplate and transom.

diagram C

Adapter bracket to jackplate side mount. *

9 x 12 9x9

DESCRIPTION

SETBACK

PORT/ STARBOARD

DIAGRAM

1810200

Talon Adapter Bracket, 3S

3"

Starboard

A, B

1810201

Talon Adapter Bracket, 3P

3"

Port

A, B

1810202

Talon Adapter Bracket, 6S

6"

Starboard

A, B

1810203

Talon Adapter Bracket, 6P

6"

Port

A, B

1810204

Talon Adapter Bracket, 9S

9"

Starboard

A, B A, B

ITEM #

STARBOARD

STARBOARD

diagram B

ADAPTER PLATE SELECTION CHART

PORT

PORT

diagram A

PORT

STARBOARD

If you’re not mounting Talon directly to the transom, you’ll need one of our adapter plates to offset the unit from the back of the boat. For more information on adapter plate applications and purchasing, visit minnkotamotors.com.

64

MKP-6 #2061125 40PD V2, 40PD, 40AP, EDGE 40, EDGE 40/H, ENDURA 30, ENDURA 34, ENDURA 36, ENDURA 38, ENDURA 40, ENDURA PRO 32, ENDURA PRO 38, PROP NO.: MOTOR DIA.: 3-1/4" 40AT, 40AT/H, MAX 30T, MAX 36T, MAX 40T, VECTOR 40, TRAXXIS 40, TRAXXIS 40/SC PROP NUT KIT: “A”

STEP 3

ITEM #

APPLICABLE MOTOR MODELS

MOTOR MODELS WITH SERIAL NUMBER PREFIX “WW,” “J” OR “K” MKP-32 #2091160 55AT, 55AT/H, 70AT, TERROVA 55, TERROVA 55/US2, TERROVA 55/AP, TERROVA 55/AP/US2, MAX 55/SC, MAX 55, MAX 55/SC/H, MAX 70, MAX 70/H/3X, PROP NO.: MOTOR DIA.: 3-5/8" MAX 70/SC, MAX 70/SC/H, MAX 70/US, MAX 55T, MAX 70T, 50PD V2, 55PD V2, 55PD V2/US2, 55PD V2/AP, 55PD V2/AP/US2, 65PD V2, 70PD V2, PROP NUT KIT “A” 70PD V2/AP, 70PD V2/AP/US2, 54PD V2 PONTOON, 68PD V2 PONTOON, 55HC PONTOON, 70HC PONTOON, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US, 65PD, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 70, VECTOR 70/3X, EDGE 45, EDGE 55, EDGE 55/H, EDGE 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55XL, RT55/ST/CP, RT55/ST/CP/AP, RT55/SP/CP, RT55/SP/CP/AP, RT70/SP/CP, RT70/SP/CP/AP, RT55/SM/L&D, RT55/SM/L&D/SC, RT70/SM/L&D/SC, RT55/SE/L&D, RT70/SE/L&D, RT55/B/H, RT55/B/SC/L&D, RT65/B/SC, RT70/B/H, RT70/SC, RT50/S, RT55/S, MK55EM, RT55EM, TRAXXIS 70, TRAXXIS 55, TRAXXIS 55/SC

Minn Kota offers a wide range of replacement props to fit all existing and many discontinued models. The props include the nut attachment and can be installed in seconds.

1810205

Talon Adapter Bracket, 9P

9"

Port

1810206

Talon Adapter Bracket, J9S*

-

Starboard

C

1810207

Talon Adapter Bracket, J9P*

-

Port

C

1810210

Talon Spacer Block Kit**

-

Both

C

1810220

Talon Riser Bracket

6"

Both

N/A

Not compatible with all jack plates. For more information on jack plate compatibility, visit minnkotamotors.com.

Required in addition to J9S and J9P brackets for T-H Marine™ Atlas 4" or 8" jack plate installations.

14

16

18

20

22

24

26

28

30

32

34

36

38

40

42

44

46

SHAFT LENGTH SELECTION GUIDE Measure down from the mounting surface of the transom or bow to the water level*. Use this measurement and the tables below to find the appropriate shaft length.

TRANSOM GUIDE

BOW GUIDE

ENGINE MOUNT GUIDE • Minimum clearance required from spine of outboard to end of cavitation plate (see diagram at right).

TRANSOM TO WATERLINE

RECOMMENDED SHAFT LENGTH

BOW TO WATERLINE

RECOMMENDED SHAFT LENGTH

0" to 10" 10" to 16" 16" to 22" Over 22"

30" 36" 42" Consult Factory

0" to 10" 16" to 22" 22" to 28" 28" to 34"

36" 42" to 45" 48" to 52" 54" to 62"

**

* Add 5" to waterline measurement for fishing in rough water. Optimal operating mode is with engine trimmed all the way down.

• Cavitation plate to waterline 13" (minimum).

= 7-1/4"

= 3" (80EM/101EM), 3-3/4" (55EM)

= 13"

65

CHARTS

MOTOR SELECTION CHART MODEL

MOUNT

CONTROL

MAX THRUST

MAX AMP DRAW

VOLTS

SPEEDS (FWD/REV)

SHAFT LENGTH

PROP

COMPOSITE SHAFT

UNIVERSAL SONAR 2

i-PILOT

AUTOPILOT

DIGITAL MAXIMIZER

BATTERY GAUGE

MAX BOAT LENGTH★

TERROVA BOW-MOUNT MOTORS

Terrova 101/AP/US2 Terrova 80/AP/US2 Terrova 80/AP Terrova 80/US2 Terrova 80 Terrova 55/AP/US2 Terrova 55/AP Terrova 55/US2 Terrova 55

Terrova Terrova Terrova Terrova Terrova Terrova Terrova Terrova Terrova

Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer

101 80 80 80 80 55 55 55 55

46 56 56 56 56 50 50 50 50

36 24 24 24 24 12 12 12 12

Variable Variable Variable Variable Variable Variable Variable Variable Variable

60" 54", 60" 54", 60" 54", 60" 54", 60" 48", 54" 48", 54" 48" 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes Yes — Yes — Yes — Yes —

Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible

Yes Yes Yes Compatible Compatible Yes Yes Compatible Compatible

Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes Yes Yes Yes

25' 25' 25' 25' 25' 21' 21' 21' 21'

TERROVA WITH i-PILOT BOW-MOUNT MOTORS

Terrova 101/IP/US2 (includes foot pedal) Terrova 80/IP/US2 (includes foot pedal) Terrova 55/IP/US2 (includes foot pedal) ★

Terrova Terrova Terrova

Electric Steer Electric Steer Electric Steer

101 80 55

46 56 50

36 24 12

Variable Variable Variable

60" 45", 60" 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes

Yes Yes Yes

Yes Yes Yes

Yes* Yes* Yes*

Yes Yes Yes

Yes Yes Yes

25' 25' 21'

POWERDRIVE V2 BOW-MOUNT MOTORS

70PD V2/AP/US2 70PD V2/AP 70PD V2/US2 70PD V2 65PD V2 55PD V2/AP/US2 55PD V2/AP 55PD V2/US2 55PD V2 50PD V2 45PD V2

PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive

Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer

70 70 70 70 65 55 55 55 55 50 45

42 42 42 42 40 50 50 50 50 42 42

24 24 24 24 24 12 12 12 12 12 12

Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable

54", 60" 54", 60" 54", 60" 54", 60" 54" 48", 54" 48", 54" 48", 54" 48", 54" 48" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Power Prop

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes — Yes — — Yes — Yes — — —

Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible

Yes Yes — — — Yes Yes — — — —

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

23' 23' 23' 23' 23' 21' 21' 21' 21' 20' 17'

POWERDRIVE V2 WITH i-PILOT BOW-MOUNT MOTORS

70PD V2/IP/US2 (no foot pedal) 70PD V2/IP (no foot pedal) 55PD V2/IP/US2 (no foot pedal) ★ 55PD V2/IP (no foot pedal)

PowerDrive PowerDrive PowerDrive PowerDrive

Electric Steer Electric Steer Electric Steer Electric Steer

70 70 55 55

42 42 50 50

24 24 12 12

Variable Variable Variable Variable

60" 54" 54" 48", 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

Yes — Yes —

Yes Yes Yes Yes

Yes* Yes* Yes* Yes*

Yes Yes Yes Yes

Yes Yes Yes Yes

23' 23' 21' 21'

FORTREX BOW-MOUNT MOTORS

Fortrex 101/US2 Fortrex 101 Fortrex 80/US2 Fortrex 80

Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360°

Cable Steer Cable Steer Cable Steer Cable Steer

101 101 80 80

46 46 56 56

36 36 24 24

Variable Variable Variable Variable

45", 52", 62" 45", 52", 62" 45", 52", 62" 45", 52", 62"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

Yes — Yes —

— — — —

— — — —

Yes Yes Yes Yes

— — — —

25' 25' 25' 25'

MAXXUM BOW-MOUNT MOTORS

Maxxum 101 Maxxum 80 Maxxum 70 Maxxum 70/SC Maxxum 55 Maxxum 55/SC Maxxum 101/H Maxxum 80/H Maxxum 70/SC/H Maxxum 55/SC/H

Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360°

Cable Steer Cable Steer Cable Steer Cable Steer Cable Steer Cable Steer Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 70 70 55 55 101 80 70 55

46 56 42 42 50 50 46 56 42 50

36 24 24 24 12 12 36 24 24 12

Variable Variable Variable 5 Variable 5 Variable Variable 5/3 5/3

42", 52" 42", 52" 42", 52" 42" 42", 52" 42", 52" 52" 52" 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

— — — — — — — — — —

— — — — — — — — — —

— — — — — — — — — —

Yes Yes Yes — Yes — Yes Yes — —

— — — — — — — — — —

25' 25' 23' 23' 21' 21' 25' 25' 23' 21'

EDGE BOW-MOUNT MOTORS

Edge 70 Edge 55 Edge 55/H Edge 45 Edge 45/H

Latch & Door Latch & Door Latch & Door Latch & Door Latch & Door

Cable Steer Cable Steer Tilt Twist Tiller Cable Steer Tilt Twist Tiller

70 55 55 45 45

42 50 50 42 42

24 12 12 12 12

5 5 5/3 5 5/3

45", 52" 45", 52" 52" 36", 45", 50" 45"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

— — — — —

— — — — —

— — — — —

— — — — —

23' 21' 21' 18' 18'

VANTAGE TRANSOM-MOUNT MOTORS

Vantage 101 Vantage 80

Metal Breakaway Metal Breakaway

Tilt/Extend Tiller Tilt/Extend Tiller

101 80

46 56

36 24

Variable Variable

Variable Variable

Weedless Wedge 2 Weedless Wedge 2

— —

— —

— —

— —

Yes Yes

— —

25' 25'

TRAXXIS TRANSOM-MOUNT MOTORS

Traxxis 80 Traxxis 70 Traxxis 55/SC Traxxis 55 Traxxis 45/SC Traxxis 45

One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

80 70 55 55 45 45

56 42 50 50 42 42

24 24 12 12 12 12

Variable Variable 5/3 Variable 5/3 Variable

42" 42" 36" 36", 42" 36" 36"

Weedless Wedge 2 Power Prop Power Prop Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes Yes

— — — — — —

— — — — — —

— — — — — —

Yes Yes — Yes — Yes

Yes Yes Yes Yes Yes Yes

25' 25' 21' 21' 18' 18'

ENDURA C2 TRANSOM-MOUNT MOTORS

Endura C2 55 ★ Endura C2 50 ★ Endura C2 45 ★ Endura C2 40 ★ Endura C2 30 ★

Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket

Telescoping Handle Telescoping Handle Telescoping Handle Telescoping Handle Telescoping Handle

55 50 45 40 30

50 42 42 42 30

12 12 12 12 12

5/3 5/3 5/3 5/3 5/3

36", 42" 36", 42" 36" 36" 30"

Power Prop Power Prop Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

— — — — —

— — — — —

— — — — —

— — — — —

21' 20' 18' 17' 14'

SPECIALTY TRANSOM-MOUNT MOTORS

Camo 55 ★ Camo 44 ★

Lever Lock Bracket Lever Lock Bracket

Tilt Twist Tiller Tilt Twist Tiller

55 44

50 42

12 12

5/3 5/3

36" 36"

Power Prop Power Prop

Yes Yes

— —

— —

— —

— —

— —

21' 18'

PONTOON BOW-MOUNT MOTORS

68PD V2 54PD V2 Pontoon 70/H Pontoon 55/H

PowerDrive w/QR Bracket PowerDrive w/QR Bracket Pontoon Latch & Door Pontoon Latch & Door

Electric Steer Electric Steer Tilt Twist Tiller Tilt Twist Tiller

68 54 70 55

42 50 42 50

24 12 24 12

Variable Variable 5/3 5/3

48" 48" 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible — —

— — — —

Yes Yes — —

Yes Yes — —

23' 21' 25' 21'

E-DRIVE ELECTRIC OUTBOARD

E-Drive E-Drive Tiller

Bolt-on Transom Clamp-on Transom

Outboard Cable Linkage Tilt Tiller

2hp 2hp

40 40

48 48

Variable Variable

20"* 20"*

Stainless Steel Stainless Steel

— —

— —

— —

— —

Yes Yes

Yes Yes

25' 25'

ENGINE MOUNT MOTORS

MK101/EM MK80/EM MK55/EM

Single-Composite Single-Composite Single-Composite

Outboard/Engine Steering Outboard/Engine Steering Outboard/Engine Steering

101 80 55

49 58 50

36 24 12

Variable Variable Variable

— — —

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

— — —

— — —

— — —

— — —

Yes Yes Yes

— — —

22' 20' 18'

FRESHWATER MOTORS

RIPTIDE ST SALTWATER BOW-MOUNT MOTORS

RT 101/ST/CP/AP RT 80/ST/CP/AP RT 80/ST/CP RT 55/ST/CP/AP

Terrova Terrova Terrova Terrova

CoPilot CoPilot CoPilot CoPilot

101 80 80 55

46 56 56 50

36 24 24 12

Variable Variable Variable Variable

54", 60" 54", 60" 54", 60" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible Compatible Compatible

Yes Yes — Yes

Yes Yes Yes Yes

Yes Yes Yes Yes

25' 25' 25' 21'

RIPTIDE ST SALTWATER WITH i-PILOT BOW-MOUNT MOTORS

RT 101/ST/IP (no foot pedal) ★ RT 80/ST/IP (no foot pedal) ★ RT 55/ST/IP (no foot pedal) ★

Terrova Terrova Terrova

i-Pilot i-Pilot i-Pilot

101 80 55

46 56 50

36 24 12

Variable Variable Variable

60" 54" 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes

— — —

Yes Yes Yes

Yes* Yes* Yes*

Yes Yes Yes

Yes Yes Yes

25' 25' 21'

RIPTIDE SP SALTWATER BOW-MOUNT MOTORS

RT 70/SP/CP/AP RT 70/SP/CP RT 55/SP/CP/AP RT 55/SP/CP

PowerDrive PowerDrive PowerDrive PowerDrive

CoPilot CoPilot CoPilot CoPilot

70 70 55 55

42 42 50 50

24 24 12 12

Variable Variable Variable Variable

54" 54" 48" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible Compatible Compatible

Yes — Yes —

Yes Yes Yes Yes

Yes Yes Yes Yes

23' 23' 21' 21'

RIPTIDE SP SALTWATER WITH i-PILOT BOW-MOUNT MOTORS

RT 70/SP/IP ★ RT 55/SP/IP ★

PowerDrive PowerDrive

i-Pilot i-Pilot

70 55

42 50

24 12

Variable Variable

54" 48"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

Yes Yes

Yes* Yes*

Yes Yes

Yes Yes

23' 21'

RIPTIDE SF SALTWATER BOW-MOUNT MOTORS

RT 101/SF RT 80/SF

Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360°

Tilt/Extend Tiller Tilt/Extend Tiller

101 80

46 56

36 24

Variable Variable

52", 62" 52", 62"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

— —

— —

Yes Yes

— —

25' 25'

RIPTIDE SM SALTWATER BOW-MOUNT MOTORS

RT 101/SM/BG/H RT 80/SM/L&D/H RT 80/SM/BG/H RT 70/SM/L&D/SC/H RT 55/SM/L&D/SC/H RT 55/SM/L&D/H

Bowguard 360° Latch & Door Bowguard 360° Latch & Door Latch & Door Latch & Door

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 80 70 55 55

46 56 56 42 50 50

36 24 24 24 12 12

Variable Variable Variable 5/3 5/3 Variable

62" 52" 52", 62" 52" 42", 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes

— — — — — —

— — — — — —

— — — — — —

Yes Yes Yes — — Yes

— — — — — —

25' 25' 25' 23' 21' 21'

RIPTIDE SE SALTWATER BOW-MOUNT MOTORS

RT 70/SE/H RT 55/SE/H

Compact Latch & Door Compact Latch & Door

Tilt/Extend Tiller Tilt/Extend Tiller

70 55

42 50

24 12

Variable Variable

52" 52"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

— —

— —

Yes Yes

— —

23' 21'

RIPTIDE SALTWATER TRANSOM-MOUNT MOTORS

RT 101/T RT 80/T RT 55/T RT 50/SC/T RT 45/SC/T

One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 55 50 45

46 56 50 42 42

36 24 12 12 12

Variable Variable Variable 5/3 5/3

52" 42" 36", 42" 42" 36"

Weedless Wedge 2 Weedless Wedge 2 Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

— — — — —

— — — — —

Yes Yes Yes — —

— — — — —

25' 25' 21' 20' 17'

160 80 55

116 58 50

24 24 12

Variable Variable Variable

— — —

— — —

24' 20' 18'

ENGINE MOUNT SALTWATER MOTORS AP = AutoPilot

CP = CoPilot

H = Hand Control

IP = i-Pilot

RT 160/EM RT 80/EM RT 55/EM SC = Speed Coil US2 = Universal Sonar 2

Dual-Composite Outboard/Engine Steering Single-Composite Outboard/Engine Steering Single-Composite Outboard/Engine Steering ★Denotes standard industry length for long shaft outboard motor. ★Denotes new model for 2011.

Weedless Wedge 2 — — — Weedless Wedge 2 — — — Weedless Wedge 2 — — — ★General guidelines only. See your dealer for specific information on which motor best suits your boat style and intended use.

— Yes — Yes — Yes *Advanced AutoPilot included on i-Pilot.

minnkotamotors.com

SALTWATER MOTORS

66

67