MinnKota 2012 catalog by NormarkUkraine Normark

Presorted Standard U.S. Postage

Minn Kota Motors 121 Power Drive Mankato, MN 56001

PAID

Mankato, MN Permit No. 121

2012 CATALOG

Johnson Outdoors Marine Electronics, Inc. 121 Power Drive Mankato, MN 56001 minnkotamotors.com

Minn Kota consumer & Technical Service

Minn Kota Dealer & Distributor Service

Johnson Outdoors Inc. Canada

P.O. Box 8129 Mankato, MN 56002

Phone (800) 493-6686 Fax (800) 451-0387

121 Power Drive Mankato, MN 56001 Phone (800) 227-6433 Fax (800) 527-4464

555 Main Street, Suite 241 Racine, WI 53403 Phone (800) 299-2592 Fax (262) 631-6609

4180 Harvester Road Burlington, Ontario L7L 6B6 Phone (905) 634-0023 Fax (905) 634-0261

Humminbird, Maxxum, Minn Kota, Riptide and Vantage are registered trademarks of Johnson Outdoors Marine Electronics, Inc. AutoPilot, Bowguard 360°, CrabClaw, Cool Power, CoPilot, DeckHand, DualBeam PLUS, Endura, Fortrex, GlideFit, Grip Glide, i-Pilot, Maximizer, MicroTouch, Minn Kota Matched Systems, Neptune, PowerDrive, Quiet Power, Terrova, Tilt Twist Tiller, Traxxis, Trim-N-Troll, Ultimate Power, Vector, Weedless Wedge, Wide Track and 3X are trademarks of Johnson Outdoors Marine Electronics, Inc. Garmin is a registered trademark of Garmin International Inc. Lowrance is a registered trademark of Lowrance Electronics Inc. WAGO is a registered trademark of WAGO Corporation. Wall-Nut is a trademark of WAGO Corporation. Specifications are subject to change without notice. ©2008-2011 Johnson Outdoors Marine Electronics, Inc. All Rights Reserved Printed in the U.S.A.

when there’s still a sliver of daylight streaking across the water. When there’s time for one more cast. When you know he’s still out there, just within reach.

You Don’t call it a day We understand. And we think your equipment shouldn’t quit either. That’s why we build ours tougher and smarter, with the philosophy that there’s no such thing as “good enough for today.”

contents Talon

Vantage Transom-Mount

Riptide SP Bow-Mount

Accessories

Advantage Minn Kota

Traxxis Transom-Mount

Riptide SF Bow-Mount

Talon Mounting & Adapter Brackets 62

Minn Kota Technologies

Endura C2 Transom-Mount

Riptide SM Bow-Mount

Charger Selection Chart

i-Pilot

Pontoon Bow-Mount

Riptide SE Bow-Mount

Replacement Prop Chart

Terrova Bow-Mount

E-Drive Electric Outboard

Riptide Transom-Mount

Shaft Length Specifications

PowerDrive V2 Bow-Mount

Advantage Minn Kota — Saltwater

Engine Mount Motor

Motor Selection Chart

Fortrex Bow-Mount

AutoPilot/CoPilot — Saltwater

DeckHand Anchor Winches

Maxxum Bow-Mount

i-Pilot — Saltwater

On-Board Battery Chargers

Edge Bow-Mount

Riptide ST Bow-Mount

Power Management

On The Web. Visit minnkotamotors.com to experience what makes a Minn Kota® a Minn Kota. You can tour the innovative features and technologies of each motor, and find your perfect trolling motor with our exclusive Select a Motor application.

HOLD YOUR GROUND. Talon, the shallow water anchor tough enough to be a Minn Kota. see page 4-5

Follow Minn Kota on Facebook, Twitter and YouTube for exclusive news and updates.

GETS THERE.

Even with an arsenal of innovative features, Talon is designed to run quiet so it won’t scare fish.

Auto-Drive.* Auto-Drive’s bottom sensing and detection technology delivers the strongest possible hold. It automatically powers the spike into the bottom with three successive hits, using increasing force on each hit.

Built-In Wave Absorption.* Talon enables your boat to move up or down without affecting the anchor. It uses a built-in floating suspension to keep you locked to the bottom, even in rough water conditions.

Rugged Anchoring Spike. guaranteed for life!

With composite fiberglass construction, the innovative spike on Talon is designed to withstand years of abuse with unmatched reliability.

stage two

BUILT SMARTER.

In addition to being faster and more powerful, Talon is easier and less costly to install, maintain and control. Innovative Design. Talon’s space-saving, lightweight design makes it as easy to install as a trolling motor, with no messy, complicated hydraulic pumps and hoses. Versatile Adjustments.* A Minn Kota Quick Release Mounting Bracket enables Talon to slide up and down or pivot up to 30˚ to accommodate any transom angle. You can also easily remove Talon when not in use.

Rough Water Mode.* For an even stronger hold, activate Rough Water Mode, which performs three Auto-Drive sequences at ten second intervals.

Noise Dissipation. The innovative design prevents noise from being emitted below the water or through the hull, where the fish can hear it.

pivo

2X Anchoring Force. Talon is built with double the force of the competition, so you can power in for a secure hold and retract the anchor easily when it’s time to move.

Two-Stage Deployment. Talon’s sequential, vertical deployment moves the spike quickly and quietly. It causes minimal disruption at the bottom and doesn’t interfere with your lines.

stage one

Talon doesn’t just anchor quicker, it anchors better. Even in currents and high winds, Talon holds steady.

Simple Design. Built with minimal moving parts and no hinge points, Talon starts quiet and stays quiet.

3 0˚

Auto Up/Down.* Deploy Talon automatically by tapping a button on your wireless remote, so you don’t have to hold it down and wait.

STAYS THERE.

E YEA

RUNS QUIET.

Half the battle is hitting your spot precisely and staying there. Talon deploys quickly and automatically to get you in position, so you can get ready to reel ’em in. Fast Deploy. Talon’s spike deploys faster than the competition, getting you in position quickly and keeping you there.

slides up and down

Mounting Brackets — Guaranteed for 5 Years. Mount Talon on our rugged, double-wall brackets for a rock-solid hold in any conditions. With strong, secure mounting brackets you can lock Talon into place and hit the water without worry. Learn more on page 62.

FAster. Stronger. Quieter. Meet the anchor that has stopped the fishing world dead in its tracks.

Talon Shallow water anchor

Standard Wireless Remotes. Two wireless remotes come standard to give you push-button control of Talon from anywhere on the boat. Includes dash mount holder. Rugged Construction. Talon is built with legendary Minn Kota toughness and reliability, and is fully resistant to the corrosive effects of saltwater. LED Depth Indicator.* Track anchor depth at a glance, with LED lights on the unit that quickly show you how far down you’re deployed in one foot increments. Deployment Notification Alarm. If you turn your engine on while Talon is deployed, an audible alarm alerts you that the anchor is down. Peace of Mind. Talon carries a comprehensive two-year warranty — plus a lifetime warranty on the spike and a five-year warranty on all brackets. Available Models. (Maximum Depth) 6' 4" White 6' 4" Black 8' 4" White 8' 4" Black

*Patent Pending. We’ve equipped Talon with exclusive innovations that no other shallow water anchor can touch.

4 5  

talon Hold it right there. Boat control and positioning are everything. The quicker and more effectively you can position yourself on a bank, weedbed or flat, the better your chance of reeling in what you’re after. Our Talon shallow water anchor deploys faster, holds stronger and outperforms competitors at every turn to change the way you think about boat positioning. It puts you on top of the fish and keeps you there, and it’s built with the legendary durability, precision and performance of a Minn Kota.

3 3

Indestructible composite shaft.

Every aspect of a Minn Kota motor is thought out and rethought until it’s good enough to bear our name. What’s left is this set of legendary innovations.

Up to five times longer run time on a single charge.

For decades, Minn Kota’s Maximizer™ technology has given anglers the power to stay out on the water longer. Instead of wasting energy with a constant flow of power, Digital Maximizer delivers only what’s needed: a precise amount of power at any setting – along with variable speed control – that optimizes draw to extend battery life and reduce damaging heat.

guaranteed for life!

If we could offer a longer guarantee than “lifetime,” we would. Our ultra-high-yield composite shafts are pound for pound stronger than steel, virtually indestructible and can flex on impact before returning to their original position. They won’t kink, break, rust or corrode. Guaranteed. 4

Weedless Wedge ™ 2.

Only a Minn Kota can push weeds away and take on the thick stuff without batterydraining chopping and hacking. We’ve improved on the legendary Roland Martin design with swept-back, flared blades for unrelenting, reliable prop performance.

Bowguard 360° ™ breakaway mount.

This patented mount breaks away on impact from any angle, then automatically resets itself. You get uninterrupted fishing and an extra measure of safety from damaging your trolling motor or boat. Detaches for added portability and easy storage. Only from Minn Kota.

Cool, quiet power.

Nothing runs cooler or more quietly than Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power and longer motor life. Our unique bearing system reduces friction to cut fish-spooking noise. So quiet they’ll never hear you coming. 6 7  

ADVANTAGE MINN KOTA better than it has to be.

You don’t think too much about advanced digital microprocessing. Ultra-high-yield composite materials probably don’t dominate your dinner conversation. But these are just some of the things that work together to make our motors outperform and outlast any other trolling motor on the water. They’re the result of countless hours of research and testing, and they’re the advantages that allow a Minn Kota to truly take you “Anywhere. Anytime.”

COPILOT™

AUTOPILOT™

go remote.

UNIVERSAL SONAR 2

STAY THE COURSE.

Free yourself from the foot pedal and fish from anywhere on the boat, with the CoPilot™ wireless remote. With full control of prop on/off, speed and steering at your fingertips, you’re in total command of your trolling motor. The compact, intuitive, waterproof remote comes with a neck lanyard and it also floats.

Our AutoPilot™ technologies are all about freeing you up to fish. Just point your motor head where you want to go and let it take control.

CoPilot for Terrova: For Terrova owners, CoPilot packs an extra punch. A high speed bypass button lets you hit full speed in an instant, and you can stay the course at the push of a button with AutoPilot activation. Add that to the long list of reasons to own a Terrova.

Our classic AutoPilot’s state-of-the-art compass system locks onto any heading you choose and delivers you there automatically. And now, Advanced AutoPilot (included on i-Pilot) uses GPS technology to keep you on your heading with unparalleled accuracy.

GAIN SOME PERSPECTIVE.

Step up to the streamlined, fully protected design of Universal Sonar 2. The transducer and wiring are completely concealed and protected from the elements, while shielded connectors virtually eliminate interference. No rigging required. No messy, exposed wires. Just crystal-clear sonar performance. The view you get is unlike any other, thanks to dual beam technology.* It scans the water using both 20° and 60° angles to give you an expanded view and better bottom detail. Also features advanced temperature sensing.

Troll along a current line or over a shelf or ledge. Just point the motor head where you want to go and AutoPilot will automatically adjust for wind, waves or current to pull the boat along the desired line.

Universal Sonar 2 is fully compatible with most fishfinders. Just use a plug-in accessory adapter (page 57) to connect to interference-free, fully enclosed sonar performance.**

Run in place. To hover over schooling fish, adjust the speed of the motor against wind, waves or current. AutoPilot will keep your boat headed in the same direction, allowing you to hover in place over a desired area.

High Speed Bypass (Terrova only) AutoPilot On/Off (Terrova only)

** 200kHz and 200kHz/83kHz DualBeam PLUS compatible. Not compatible with Humminbird Side Imaging.

Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right

Actual Size

Troll parallel to the shoreline. Point the motor at a distant landmark, parallel to the shore. AutoPilot will maintain your heading until you choose to change your course.

Shielded for Added Peace of Mind. These shielded cable connectors virtually eliminate the possibility of sonar interference and they’re waterproof for extra dependability.

60˚ 83kHz

20˚ 200kHz

Get Universal Sonar 2 on Fortrex™, Terrova™ and PowerDrive™ V2 bow-mount motors. * Available on Humminbird® DualBeam PLUS™ and select Lowrance® and Garmin® units.

Repeat a productive troll. At the end of a run, rotate the motor head 180 degrees. AutoPilot will swing the boat completely around and take you back along the same course.

8 9  

Minn kota

technologies The best motors in the world get even better when you equip them with our revolutionary boat control and sonar technologies. Take a look at the innovations that are changing the way people fish.

NEW WIRELESS gPS Trolling System

CRUISE CONTROL.

i-Pilot’s cruise control function delivers outstanding bait presentation by maintaining your actual on-the-water speed (in miles per hour) and allowing you to adjust your speed in 1/10-mile-per-hour increments.

an ergonomically redesigned remote. double the memory for spot-lock and record a track. the new i-Pilot® changes the game again. Record a track.

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

new

tracks

Advanced AutoPilot.

Advanced AutoPilot uses GPS technology to keep you precisely on the heading you choose. Just point the motor head in the direction you want to travel, push a button and let it keep you on your heading with unparalleled GPS accuracy while compensating for wind, waves, current and side drift.

RECORD A TRACK: i-Pilot can record your track (A to B), for up to two miles. To retrace your path in either direction, just press the Track to Start or Track to End buttons.

Spot-Lock.

new

CoPilot.

Control speed, steering, prop on/off and high-speed bypass – our “legendary” CoPilot functions – from your i-Pilot remote. Free yourself from the foot pedal and fish from anywhere on the boat.

Redesigned Remote.

The new i-Pilot remote features a 20% larger LCD screen, high‑visibility laser‑etched buttons and an easy‑access external battery compartment. Compact, watertight and easy to use, this remote gives you instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength.

Spots

Spot-Lock works like an electronic anchor. Choose up to six separate spots for i-Pilot to remember, and at the push of a button, it will correct for wind or currents to hold you in place. Spot-Lock Recall lets you return to your spot later, from up to a quarter mile away. SPOT-LOCK: Select your spot,

and if you drift more than five feet away, i-Pilot will trigger your trolling motor to bring you back.

5 FT i-Pilot is available on Terrova and PowerDrive V2 bow-mount trolling motors either pre-installed on select models or as an add-on accessory.

features minn kota’s two-year warranty

Actual Size

20% Larger Screen

10 11  

i-PILOT

THE NAVIGATION REVOLUTION. How can this remote change the way you fish? By actually letting you fish. i-Pilot® uses GPS technology to lock onto a fishing spot, record and retrace paths, set cruise control, and more. Redesigned with an ergonomic new remote, bigger LCD screen, and double the Spot-Lock and Record a Track memory, i-Pilot lets you spend less time positioning your boat and more time setting the hook. All wireless. All with GPS accuracy. Altogether revolutionary.

MOTORS

Stow. Deploy. Repeat.

101 80 55

b ow - mo u nt

so you can catch yours.

Available thrust levels

terrova

terrova designed with no limits,

Simply depress the handle on the mount. Fallaway ramps effortlessly deploy the motor into the water.

freshwater

Easy in. Easy out. Everyday. That’s the thought behind Terrova’s innovative stow/deploy mechanism. The balanced motor design makes stowing easy, and a master cut-off switch automatically turns off the power when stowed.

specifications Control electric steer Shaft Length 45", 48", 54", 60" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

More power. More innovation. More than enough strength and intelligence to take any obstacle and put it in its place. With up to 101 pounds of thrust and ingenious technologies like CoPilot, AutoPilot and i-Pilot, Terrova™ breaks the mold, so you can fish without limits.

electric steer foot pedal. NEW i-Pilot Wireless GPS Trolling System.

i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control and give you command of speed, steering and Advanced AutoPilot. Optimize your Terrova with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 10.

Terrova’s waterproof, low-profile foot pedal lets you take precise control with less than one degree of steering resolution. Features IP68 waterproof rating.

autopilot keeps you on course.

Digitally controlled AutoPilot uses a state-of-the-art compass to deliver you on any bearing you choose. Infinitely variable steering adjustments provide smoother course corrections and tighter heading accuracy against wind, waves and current. Included on select models.

AutoPilot “ON”/“OFF” Momentary/Constant “ON”/“OFF”

Go Remote with CoPilot.

Only the Terrova wireless CoPilot accessory lets you activate AutoPilot or reach maximum power at the push of a button. You can also take control of speed, steering and on/off command, from anywhere on the boat. For more information, see page 57.

Heel/toe steering Left steer Momentary on Right steer Infinite speed control Momentary on

MOTORS

Deploy-Assist Lever.

PowerDrive V2’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. Depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

powerdRive v2

70 65 55 50 45

freshwater b ow - mo u nt

powerdrive v2 highly evolved.

Available thrust levels

specifications Control electric steer Shaft Length 48", 54", 60" Prop Weedless Wedge 2* Power Prop* Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes * Select models. See motor selection chart on pages 66-67.

It’s been over 75 years since we introduced our first electric trolling motor. To say the technology has evolved since then is an understatement. Take PowerDrive V2, with big-time strength and innovative, ergonomic controls that have made it one of the most trusted names on the water. It’s not merely an upgrade. It’s an evolutionary leap.

NEW i-Pilot Wireless GPS Trolling System.

Ergonomically Designed Foot Pedal.

i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control and give you command of speed, steering and Advanced AutoPilot. Optimize your PowerDrive V2 with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 10.

Control speed, steering, and momentary and constant on/off with PowerDrive V2’s foot pedal. It features the industry’s highest IP68 waterproof rating and an 18' cord. For optional foot pedals, see page 58.

NOTE: i-Pilot will replace the foot pedal on PowerDrive V2.

Speed control Right

Go Remote with CoPilot.

Enjoy the freedom to control speed and steering from anywhere on the boat with our wireless CoPilot remote. The compact, innovative accessory can be attached to a neck lanyard for easy access. For more information, see page 57.

Momentary/Constant “ON” switch Momentary button High-impact composite material Left

autopilot: Ready. Set. Fish.

Point the motor in the direction you want to go, then activate the AutoPilot button. It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even against wind and waves.

MOTORS

mono-arm design: the secret weapon.

That extruded, anodized aluminum arm doesn’t just look tough. It redefines tough. Fortrex’s Mono-Arm Design gives it ruggedness and strength that’s unmatched by any other motor on the water. And with its ingenious, one-piece construction, Fortrex runs with less wear, longer life and quieter operation.

fortrex

b ow - mo u nt

AND DARK ALLEYS.

101 80

freshwater

fortrex MADE FOR WEED BEDS, STUMP FIELDS

Available thrust levels

specifications Control cable steer Shaft Length 45", 52", 62" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

Why’d we leave Fortrex’s solid, extruded aluminum arm exposed? So everyone else on the water knows what they’re up against: the most ruthless motor we’ve ever unleashed. Its unique, one-piece design makes it the beefiest, meanest, quietest motor on the water. Consider yourself warned.

Illuminated Directional Indicator. Lift-Assist eases stow and deploy.

Fortrex’s patented Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen gas-charged spring.

Fortrex’s easy-to-read, illuminated directional indicator leaves no doubt about where you’re headed.

cable steer foot pedal . Speed control High-impact composite material

Removable Bowguard 360°.

Lifting the motor and bowguard off of the mount is now even easier on Fortrex – just remove a single cap screw. The patented Bowguard 360°™ also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.

Momentary button Side-mounted Momentary/ Constant “ON” switch Heel block

Counter-Tension Stabilizer (CTS).

CTS uses an integrated spring that applies force whether the motor’s stowed or deployed. On the water, that translates to a motor with no play, no give, reduced steering torque and silent operation.

MOTORS

Bowguard 360°.

Our patented Bowguard 360° breaks away on impact from any angle, then automatically resets itself. You get uninterrupted fishing and an extra safeguard from damaging your trolling motor or boat. Detaches for added convenience.

b ow - mo u nt

specifications Control cable steer/Hand Control* Shaft Length 42", 52" Prop Weedless Wedge 2

maxxum

101 80 70 55

freshwater

maxxum what we’re made of.

Available thrust levels

Available on select models.

Composite Shaft Yes minnkotamotors.com

Digital Maximizer Yes* Cool, Quiet Power Yes * Select models. See motor selection chart on pages 66-67.

You’re the first one on the water. And the last one off. That drive and determination are exactly what we built into Maxxum®. We’ve fortified the motor head with a new hybrid composite material that’s five times stronger than before. And both our foot control and hand control models feature tournament-tested power and innovative fishing features that were made with one purpose: keeping up with people like you.

wired to the water. digital maximizer ™.

By controlling the draw of power at variable speeds, Digital Maximizer lets you stay on the water up to five times longer on a single charge.

Maxxum has a foot pedal with ultra-responsive steering and an ergonomic design. There’s more room for your foot, and more precise speed control. Speed control High-impact composite material Momentary button

Illuminated Directional Indicator.

Maxxum foot control models feature an easy-to-read, illuminated directional indicator. It delivers a clear reading in any light, so you know right where you’re headed.

maxxum ® Hand Control.

The Maxxum Hand Control motor features a comfortable Tilt/Extend Tiller handle that can both tilt (up to 45°) and extend (up to 6") for maximum control. And the motor head’s digital battery indicator lets you know just how much time you have left on the water.

Side-mounted Momentary/ Constant “ON” switch Heel block

MOTORS

NEW EDGE MOUNT.

We gave our tried and trusted bow-mount workhorse a shot in the extruded, anodized aluminum arm. By the time its competitors start fading with the sunset, Edge’s all-new, no-nonsense mount is just getting started. And with rock-solid stowing and a Latch & Door design for easy removal, it doesn’t sacrifice an ounce of convenience along the way. 21

freshwater

edge

Available thrust levels 70 55 45

b ow - mo u nt

edge ARMED AND DANGEROUS.

specifications Control cable steer/Hand Control* Shaft Length 36", 45", 50", 52" Prop Weedless Wedge 2* Power prop*

minnkotamotors.com

Composite Shaft Yes Cool, Quiet Power Yes

* Select models. See motor selection chart on pages 66-67.

You want a motor that knows when to show a little backbone? Then meet the all-new Edge, with an ultra-tough, marine-grade anodized aluminum spine and an impact-resistant composite head. Edge hits the water with uncompromising strength, relentless durability and an arsenal of features that deliver you to the fish.

cable steer foot pedal . Indestructible Composite Shaft. Guaranteed For Life!

Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

Get wired to the water with Edge’s foot pedal. It features ultra-responsive steering and an ergonomic design, with more room for your foot, and more precise speed control. Speed control High-impact composite material Momentary button

Directional indicator.

An easy-to-read directional indicator is built into the top of the motor head on Edge foot control models. You’ll spend more time scanning the water and less time worrying about your motor.

Side-mounted Momentary/ Constant “ON” switch Heel block

Edge Hand control Motor.

Our 55- and 45-lb Edge models feature our Tilt Twist Tiller™. The natural ergonomic grip gives you the ultimate in hands-on control for speed and steering. Shaft lengths in 45" and 52".

MOTORS

transom - mo u nt

minnkotamotors.com

Breakaway Mount. Backtroll in an Instant. Available thrust levels 101 80

When the fishing calls for backtrolling, Vantage responds. Simply lift the directional indicator, rotate it 180° and set it back in place. It’s that fast and easy to change direction.

Unlike conventional transom mounts, the Vantage mounting system breaks away on impact. It’s easy to reset and protects your motor from unseen hazards.

specifications Mount breakaway control Tilt/extend tiller shaft length variable

180˚

More Response with Less Effort.

With 4:1 articulated steering, rotating the lower unit 180° is as easy as moving the Tilt/Extend Tiller just 45°. Besides delivering maximum results with minimum effort, it stays out of the way of your outboard or kicker motor. 45˚

45˚

Prop weedless wedge 2 Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

Power Trim/Stow and Deploy — Automatically easy. When depth and fishing conditions change, all you have to do is push a button to raise and lower the motor. It also automatically stows the motor at the end of the day or when you’re on the move.

Digital Maximizer.

Digital Maximizer provides up to five times longer run time on a single charge. By controlling the draw of power at variable speeds, it eliminates wasted energy, extends battery life and gives you more time on the water.

vantage

freshwater

vantage instant gratification.

Get what you want, when you want it. With Vantage®, we’ve made it easier than ever to take control of stow and deploy, steering, and backtrolling. And with a convenient Tilt/Extend Tiller that extends to a full 31", effortless command is in your grasp.

MOTORS

transom - mo u nt

minnkotamotors.com

one-hand stow.

Traxxis’ remarkably simple, one-hand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow the motor. Then when it’s time to go, use the easy-access thumb release to deploy Traxxis into any one of ten different positions.

Available thrust levels 80 70 55 45

PUSH-TO-TEST BATTERY METER.

Get an instant “state of charge” reading with the push of a button.

specifications mount one-hand stow

Available only on variable speed models.

Control tilt/extend tiller Shaft Length 36", 42"

Available on select models.

Quick-Lock Cam Depth Adjuster.

Change depths simply and securely with Traxxis’ Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

Prop WEEDLES WEDGE 2* power prop*

Versatile Steering Tension Control.

Composite Shaft Yes

The innovative collar above the Traxxis mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Traxxis in place, allowing for true vertical stowing.

Digital Maximizer Yes* Cool, Quiet Power Yes

* Select models. See motor selection chart on pages 66-67.

A Twist on Hand Control.

Traxxis’ innovative, comfortable Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") for maximum control to fit any style of fishing. It even includes a convenient digital battery indicator located right on the motor head.

traxxis

freshwater

traxxis Say ‘goodbye’ to the status quo.

When the walleye are biting, you’d better be on the spot. All the well-positioned casts in the world don’t mean a thing if you can’t stay on the fish. That’s why every facet of the Traxxis™ was engineered to keep you in the game, no matter where the game takes you. It’s the ultimate in transom-mount trolling performance.

MOTORS

transom - mo u nt

minnkotamotors.com

Available thrust levels endura C2 55 50 45 40 30 waterfowl 55 45

Lever Lock Bracket.

Our Lever Lock Bracket delivers a rock-solid mount that’s stronger than conventional brackets. Special composite materials resist flexing, warping and UV damage.

specifications mount lever lock bracket control Telescoping handle* hand control*

Waterfowl Edition.

Built to keep you in the action when the shooting heats up, our Waterfowl Edition is available in 55- or 45-lb thrust levels. It features a Tilt Twist Tiller, indestructible composite shaft and Power Prop.

Indestructible Composite Shaft. Guaranteed For Life!

Pound for pound, our composite shaft is stronger than steel. It flexes on impact and will not break, kink or corrode. We’re the only ones who trust our trolling motor shaft enough to guarantee it for life.

Shaft Length 30", 36", 42" Prop Power prop Composite Shaft Yes Cool, Quiet Power Yes * Select models. See motor selection chart on pages 66-67.

Telescoping handle.

Endura C2 features an ergonomic, six-inch telescoping handle for the most comfortable, convenient steering available.

Trolling Motor Power Center.

Ideal for small boat, transom applications. Protects battery and allows connection with trolling motor leads without opening box. Displays current “state of charge.” See page 59.

endura C2

freshwater

endura C2 you can’t beat a true original.

While others try to imitate it, we innovate it. Endura™ C2 is the legendary performer that’s built to explore, built to last and backed up with our two-year warranty. It’s the ultimate coming together of form and function, in a package that puts you on the water day after day, year after year – like no other.

MOTORS

Aluminum Quick Release Bracket.

Quickly, easily remove your PowerDrive V2 Pontoon motor with our aluminum bracket. It allows for maximum versatility and features a quiet, secure locking system. Standard on PowerDrive V2 Pontoon models. 28

powerdrive v2 68 54 hand control 70 55

b ow - mo u nt

specifications control electric steer | Hand control Shaft Length pdv2 = 48" | hc = 52" i-Pilot compatible with PowerDrive V2 Pontoon models.

Prop Weedless Wedge 2

Available on Pontoon Hand Control models only.

minnkotamotors.com

Composite Shaft yes Digital Maximizer pdv2 = Yes | hc = no Cool, Quiet Power Yes See motor selection chart on pages 66-67.

Harness the storied power of a Minn Kota trolling motor for your next cruise around the lake. PowerDrive V2 or Hand Control models give you quiet, steady, all-day performance. And with quick and easy mounting, you get a motor that’s built to let you sit back and appreciate a perfect day on the lake.

Go Remote with CoPilot.

On our PowerDrive V2 Pontoon model, you can control speed, steering and on/off command from the palm of your hand. The optional wireless CoPilot remote accessory allows you to navigate from anywhere on the boat.

Pontoon enjoy the ride.

Pontoon Hand Control Motor. Ergonomically Designed Foot Pedal.

On our PowerDrive V2 Pontoon model, you can control speed, steering, and momentary and constant on/off with our ergonomic foot pedal. It features the industry’s highest IP68 waterproof rating and an 18' cord. For the optional wireless foot pedal, see page 58.

DeckHand ™ Pontoon.

Raise and lower the anchor at the touch of a button with the DeckHand™ Pontoon. It includes a DeckHand 40 remote switch for easy operation from anywhere on the boat.

Precisely, comfortably control speed and steering with the Hand Control motor’s Tilt Twist Tiller. Available in 70- and 55-lb thrust levels. Also features a compact mount to free up more deck space. Compatible with our Quick Release Brackets (page 58) and uses a Latch & Door design for easy depth adjustment and motor removal.

pontoon

freshwater

Available thrust levels

MOTORS

Electronic Throttle Control for fingertip response. The ultra-responsive throttle lever has forward/neutral/reverse positions and push-button tilt up/down. Mounts either on the binnacle or side mount at the cockpit. Features key switch for added safety.

e-drive

o u t b oard

a Day on the Lake.

electric

E-DRIVE There’s Nothing Like

Available electric outboard horsepower

2 hp

specifications MOUNT BOLT-ON TRANSOM CLAMP-ON TRANSOM* CONTROL BOLT-ON = OUTBOARD CABLE LINKAGE CLAMP-ON = TILT TILLER SHAFT LENGTH 20"

* Not rated for kicker motor application on gas engine powered fishing boats.

minnkotamotors.com

Digital Maximizer YES Cool, Quiet Power Yes

See motor selection chart on pages 66-67.

There’s no better way to enjoy the lake than with Minn Kota’s powerful E-Drive Electric Outboard motor. On lakes with gasoline restrictions, the quiet 2 hp power plant will move a full-size pontoon boat up to 5 mph with no fumes, no emissions and no messy gasoline. Quiet. Clean. Built to run up to 2 hours at 100% on a single charge. Features a special tilt-lock mechanism for safe and secure trailering.

Minn Kota Actuators.

A custom 12V DC motor powers our intelligently designed actuator on our E-Drive motors. It operates smoothly, quietly and dependably, and also features the industry’s highest IP68 waterproof rating.

Tilt Gauge. Realtime Digital Battery Gauge.

Dash-mounted tilt gauge provides an instant readout of motor position. Not available on E-Drive Tiller model.

E-Drive features a back-lit Realtime Digital Battery Gauge, giving you an instant reading of how many hours of runtime you have remaining at your current speed. Also features a fuel gauge showing battery condition, as well as throttle power level.

E-Drive Tiller Motor.

On gasoline-restricted lakes, the E-Drive Tilt Tiller motor provides primary propulsion with a comfortable, ergonomic Tilt Tiller. Features an easy-to-see, realtime battery gauge on the head and a clamp-on transom bracket that mounts easily to most aluminum V-hull boats.

E-Drive Tiller.

Exclusive Tilt Tiller provides comfortable and convenient control.

Silent Operation. Cool Power.

Up to five times longer run time on a single charge.

5-mil polyester paint

Advanced Corrosion Protection.

Riptide® motors are impervious to saltwater’s corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil polyester, powder coat paint. When it’s all done, you’re left with unequaled corrosion protection.

Zinc powder primer Anodized or dichromate armor plating Premium marine alloy cleaned with 7-step process

Stay on the water longer with Digital Maximizer. Instead of wasting energy with a constant flow of power, Digital Maximizer delivers only what’s needed: a precise amount of power at any setting – along with variable speed control – that optimizes draw to extend battery life and reduce damaging heat.

Fully Encapsulated Electronics.

Marine-grade urethane fully encapsulates Riptide control boards to protect the 2 electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater.

1 1

Indestructible composite shaft.

Minn Kota’s indestructible composite shaft is impervious to the corrosive effects of saltwater. Pound for pound stronger than stainless steel, will not break, kink or corrode, and does not contribute to galvanic corrosion. Guaranteed for life! 32 33  

Riptide ST

Riptide SP

Riptide SF

Riptide SM

Riptide SE

Riptide transom

Effortless stow/deploy and wireless control put you in command.

Ergonomically designed features for better control, with wireless navigation.

A revolutionary mount for the saltwater powerhouse.

The classic Minn Kota saltwater performer, with legendary ease of use.

A rugged new mount built for smaller technical skiffs.

Our transom-mount saltwater beast never backs down.

ADVANTAGE MINN KOTA Saltwater Doesn’t Stand a Chance.

We’ve stacked the deck against saltwater. Each component is saltwater tested and fortified with advanced processes and materials to resist corrosion. Whether you’re sightin’ snook from the platform or trolling for reds along the mangroves, the last thing you need is saltwater getting in your way. With Riptide, it never will.

Our AutoPilot technologies are all about freeing you up to fish. Just choose your heading and AutoPilot will keep you on your course, correcting for wind, waves and current.

Along current lines, or over shelves or ledges, AutoPilot will make automatic adjustments against wind, waves or current to continue to pull your boat in the desired direction.

PICK YOUR POISON.

Run “in place” over schooling fish, by using AutoPilot to adjust your motor against wind, waves or current – keeping you in prime position to reel ’em in.

autopilot: stay the course.

Our classic AutoPilot technology has been navigating anglers through mangroves and flats for years. Its state-of-the-art compass system locks onto any heading you choose and delivers you there automatically. And now, Advanced AutoPilot (included on i-Pilot) uses GPS technology to keep you on your heading with unparalleled accuracy.

PURE AND SIMPLE.

Using either AutoPilot system is a breeze. Just point your motor head where you want to go and let it take control. Both AutoPilot systems will automatically correct for wind, waves and current to keep you on your heading.

Troll parallel to the shoreline by activating AutoPilot to maintain your heading until you choose to change it. Repeat a productive troll by rotating the motor 180° at the end of your run. AutoPilot will swing the boat around and retrace your path.

copilot: The World at Your Fingertips.

There’s no need to clutter up you deck with a foot pedal when you arm yourself with the CoPilot remote. CoPilot gives you the freedom to fish from anywhere on the boat – even the platform – and allows you to control on/off, speed and steering – all from the palm of your hand. Standard on Riptide ST and SP.

Riptide ST CoPilot. Go Remote.

CoPilot’s remote looks like a car’s keyless entry system – and it’s just as easy to use. The handheld, wireless remote is conveniently attached to a neck lanyard (included) for easy access, and the remote is completely waterproof and floats. High Speed Bypass (Terrova only) AutoPilot On/Off (Terrova only)

In addition to being the most relentless saltwater motor on the market, Riptide ST uses a CoPilot remote with two exclusive features. The high speed bypass button lets you hit full speed in an instant, and you can also stay the course at the push of a button with AutoPilot activation.

Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right Actual Size

34 35  

Autopilot & COPILOT Total navigation at the push of a button.

Getting where you want to go is easy when you let our exclusive AutoPilot and CoPilot take over. AutoPilot locks on to a heading and stays on course with unmatched precision, even in the face of heavy waves, riptides or currents. Our CoPilot remote gives you fingertip command from anywhere on the boat. We never run out of ways to help you tame saltwater – the most corrosion-resistant motors on the water are also the easiest to control.

NEW WIRELESS gPS Trolling System

CRUISE CONTROL.

an ergonomically redesigned remote. double the memory for spot-lock and record a track. the new i-Pilot changes the game again.

Record a track.

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

new

tracks

Advanced AutoPilot.

Simply push the Record button and fish along your desired course. i-Pilot will store that track to memory (up to six separate tracks). When you want to retrace a course, i-Pilot’s Playback functions will automatically guide your boat along the track. RECORD A TRACK: i-Pilot can record your track (A to B), for up to two miles. To retrace your path in either direction, just press the Track to Start or Track to End buttons.

Spot-Lock.

new

CoPilot.

Control speed, steering, prop on/off and high-speed bypass – our “legendary” CoPilot functions – from your i-Pilot remote, giving you the freedom to fish from anywhere on the boat.

Redesigned Remote.

The new i-Pilot remote features a 20% larger LCD screen, high‑visibility laser-etched buttons and an easy‑access external battery compartment. Compact, watertight and easy to use, this remote gives you instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength.

Spots

5 FT

SPOT-LOCK: Select your spot,

and if you drift more than five feet away, i-Pilot will trigger your trolling motor to bring you back.

i-Pilot is available on Riptide ST and Riptide SP bow-mount trolling motors either pre-installed on select motors or as an add-on accessory.

features minn kota’s two-year warranty

Actual Size

20% Larger Screen

36 37  

i-PILOT

THE NAVIGATION REVOLUTION. How can this remote change the way you fish? By actually letting you fish. i-Pilot uses GPS technology to lock onto a fishing spot, record and retrace paths, set cruise control, and more. Redesigned with an ergonomic new remote, bigger LCD screen, and double the Spot-Lock and Record a Track memory, i-Pilot lets you spend less time positioning your boat and more time setting the hook. All wireless. All with GPS accuracy. Altogether revolutionary.

MOTORS

Stow. Deploy. Repeat.

Easy in. Easy out. Everyday. That’s the thought behind Riptide ST’s innovative stow/deploy mechanism. The balanced motor design makes stowing easy, and a master cut-off switch automatically turns off the power when stowed.

Available thrust levels 101 80 55

bow - mount

specifications Control wireless copilot Shaft Length 48", 54", 60" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

We put Riptide ST to the test, because we know you will. You need a motor that runs with a combination of stealth silence and unrelenting toughness. One that won’t spook fish, or back down from even the most extreme conditions. We know saltwater anglers never turn down a challenge. As it turns out, neither do we.

Digital Maximizer. NEW i-Pilot Wireless GPS Trolling System.

i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. Optimize your Riptide ST with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 36.

Up to five times longer run time on a single charge.

Optional Foot Pedal.

autopilot keeps you on course.

AutoPilot “ON”/“OFF” Momentary/Constant “ON”/“OFF” Heel/toe steering

Go Remote with Standard CoPilot.

Take total control of Riptide ST, from anywhere on the boat. The ST wireless CoPilot remote gives you the unique abilities to activate AutoPilot or instantly reach maximum power. And it features classic CoPilot controls like speed, steering and on/off command. It’s the only remote that can handle a motor this powerful.

Left steer Momentary on Right steer Infinite speed control Momentary on

RIPTIDE ST

S A L T water

riptide St Drop In Unexpectedly.

Simply depress the handle on the mount. Fallaway ramps effortlessly deploy the motor into the water.

MOTORS

Deploy-Assist Lever.

Riptide SP’s deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. When you depress the lever, the motor deploys and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are.

riptide sp

70 55

saltwater bow - mount

riptide sp THE POWER TO BE COUNTED ON.

Available thrust levels

specifications Control wireless copilot Shaft Length 48", 54" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

CoPilot wireless control comes standard. AutoPilot delivers you to any heading you choose. Easy stow and deploy. Advanced corrosion protection. Riptide SP is saltwater-engineered and designed to keep you in position, on course and focused on what counts: reeling in more fish.

Digital Maximizer. NEW i-Pilot Wireless GPS Trolling System.

i-Pilot frees you up to focus on fishing. It uses GPS technology to remember paths and fishing spots on the water, activate cruise control, and give you command of speed, steering and Advanced AutoPilot. Optimize your Riptide SP with i-Pilot (available pre-installed or as an add-on accessory) for unprecedented automatic boat positioning. Learn more on page 36.

Up to five times longer run time on a single charge.

Optional Foot Pedal.* Speed control Momentary/Constant “ON” switch Right

autopilot: Ready. Set. Fish.

Point the motor in the direction you want to go, then activate the AutoPilot button. It’s that easy. AutoPilot’s compass automatically keeps you on your bearing, even through rough conditions.

Momentary button High-impact composite material Left

Go Remote with Standard CoPilot.

Control speed and steering from anywhere on the boat with our wireless remote. It comes standard on Riptide SP. For more information, see page 35.

*Not compatible with i-Pilot.

MOTORS

mono-arm design: the secret weapon.

That extruded, anodized aluminum arm doesn’t just look tough. It redefines tough. Riptide SF’s Mono-Arm Design gives it ruggedness and strength that’s unmatched by any other motor on the water. And with its ingenious, one-piece construction, Riptide SF runs with less wear, longer life and quieter operation. 42

101 80

bow - mount

specifications Control hand control Shaft Length 52", 62" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

Arm yourself with the ultimate weapon against saltwater. Riptide SF features fewer moving parts, tighter tolerances and our revolutionary Mono Arm for unwavering toughness. While features like an easy-to-use cam-lock depth adjuster make day-to-day operation easier, SF doesn’t give up an ounce of power, silence or rugged reliability. It’s everything you need to put the destructive effect of saltwater in its place.

Digital Maximizer. Lift-Assist eases stow and deploy.

Riptide SF’s patented Lift-Assist design cuts the weight of stow and deploy in half, making it as easy as lifting your SUV tailgate. Features a stainless steel, nitrogen gas-charged spring.

Removable Bowguard 360°.

Lifting the motor and bowguard off of the mount is now even easier on SF – just remove a single cap screw. The patented Bowguard 360° also features a dual bearing system that eliminates noise and allows for improved breakaways from any angle.

Counter-Tension Stabilizer (CTS).

Up to five times longer run time on a single charge.

A New Twist on Hand Control.

Riptide SF’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

riptide sf

saltwater

RIPTIDE SF THE Assault on Salt.

Available thrust levels

MOTORS

A Twist on Hand Control.

Riptide SM’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head. 44

101 80 70 55

bow - mount

specifications Control hand control Shaft Length 42", 52", 62" Available on select models.

Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes* Cool, Quiet Power Yes * Select models. See motor selection chart on pages 66-67.

Precision maneuverability. Accurate bait presentation. Meticulous speed control. You count on your trolling motor for a lot. And along the way, it has to fight corrosion, run quietly and perform with flawless reliability. Riptide SM is the trusted powerhouse that meets those challenges head on, keeping you in position to make the catch of the day, every day.

Digital Maximizer. Bowguard 360°.

The patented Bowguard 360° mounting system features a heavy-duty, saltwaterengineered, corrosion-resistant stainless steel spring. It enables the mount to break away on impact from any direction, then automatically resets itself, protecting the motor and bow of boat from hidden obstacles. Detaches for added convenience. Available on select models.

Latch and Door.

Latch and Door models feature non-binding nylon inserts and anti-seize lubricant for a lifetime of trouble-free use. Removes quickly and easily for safe storage. Available on select models.

Quick-Lock Cam Depth Adjuster.

Change depths simply and securely with Riptide SM’s Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

Up to five times longer run time on a single charge.

Indestructible Composite Shaft. Guaranteed For Life!

Pound for pound, SM’s composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

riptide SM

saltwater

RIPTIDE SM Saltwater’s natural enemy.

Available thrust levels

MOTORS

A Twist on Hand Control.

Riptide SE’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head. 46

70 55

bow - mount

specifications

RIPTIDE SE A SHOT IN THE ARM

Control hand control Shaft Length 52" Prop Weedless Wedge 2 Composite Shaft Yes

minnkotamotors.com

Digital Maximizer Yes Cool, Quiet Power Yes See motor selection chart on pages 66-67.

Need proof that the all-new Riptide SE won’t let anything get in your way? Look no further than the marinegrade anodized aluminum arm running down the center. Coupled with an impact-resistant composite head, the newly redesigned Riptide SE is happy to take any punishment you can dish out. Heck, it kind of enjoys it.

Digital Maximizer. new edge Mount.

This bow-mount beast just got a little harder edge. We redesigned Riptide SE with an extruded, anodized aluminum arm for uncompromising strength. And with rock-solid stowing and a Latch & Door design for easy removal, it’s as easy to use as it is tough.

Quick-Lock Cam Depth Adjuster.

Change depths simply and securely with Riptide SE’s Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

Indestructible Composite Shaft. Guaranteed For Life!

Pound for pound, SE’s composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life.

Up to five times longer run time on a single charge.

Fights galvanic corrosion.

Galvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a patented sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that’s completely protected from saltwater’s destructive forces.

riptide se

saltwater

Available thrust levels

MOTORS

t r a n s o m - m o u n t

minnkotamotors.com

one-hand stow.

Riptide Transom’s remarkably simple, one-hand stow mechanism gets the motor in and out of the water in no time. Just pull up and forward to stow. When it’s time to fish, use the easy-access thumb release to deploy Riptide into any one of ten different positions.

Available thrust levels 101 80 55 50 45

Push-to-Test battery meter.

Get an instant “state of charge” reading with the push of a button.

specifications mount one-hand stow

Available only on variable speed models.

Control hand control Shaft Length 36", 42", 52"

Available on select models.

A New Twist on Hand Control. Quick-Lock Cam Depth Adjuster.

Change depths simply and securely with Riptide Transom’s Quick-Lock cam adjuster. It makes depth adjustment simple and locks in tight to keep your motor right where you want it.

Prop Weedless Wedge 2* Power Prop*

Versatile Steering Tension Control.

Composite Shaft Yes

The innovative collar above the Riptide mount allows you to adjust steering tension to your desired level. You can keep it loose for effortless steering or tighten it down to keep Riptide in place, allowing for true vertical stowing.

Digital Maximizer Yes* Cool, Quiet Power Yes

* Select models. See motor selection chart on pages 66-67.

Riptide’s ergonomically contoured Tilt/Extend Tiller handle can both tilt (up to 45°) and extend (up to 6") to fit any style of fishing, and it tilts downward for easy storage. A convenient digital battery indicator is located right on the motor head.

riptide Transom

s a l t w a t e r

riptide transom Saltwater just threw in the towel.

Riptide steps up to the rigors of saltwater and never backs down. Where lesser motors fold their tents and head home under pressure, Riptide brings it day after day. You simply cannot find a trolling motor better suited to give saltwater the ultimate staredown. End of story.

MOTORS

Remote Speed Control.

Control the speed of your EM motor with an 18' corded remote control. It can be mounted or handheld, and offers infinite variable speed control in forward and reverse. Features neutral (off) detent position. The motor can be steered using the boat’s steering wheel or outboard tiller. 50

specifications

160 101 80 55

voltage 12, 24, 36

Freshwater Engine Mount.

Prop Weedless Wedge 2

speeds (fwd/rev) bracket Variable composite

engine mount

Available thrust levels

See motor selection chart on pages 66-67.

saltwater Engine Mount.

When it’s time to trade skis and wakeboards for rods and reels – Engine Mounts make sure you’re ready.

Our Saltwater Engine Mount motors put the corrosion-resistant power of Riptide on your boat without cluttering the deck.

minnkotamotors.com

Instantly transform your boat into a bona fide fishing machine without adding a motor to your deck. Our Engine Mount (EM) motors can easily be implemented and won’t interfere with your boat or motor. They’re perfect for slow maneuvering or picking your way through tight spots.

engine mount At the ready.

A Discrete, InterferenceFree Mount.

SEALED AND PROTECTED ELECTRONICS.

EM mounts on the cavitation plate of your outboard or I/O lower unit, with no stowing or deploying required. The motor stays out of sight, won’t interfere with your I/O motor, keeps your deck clear, and rides completely out of the water once you’re on plane.

EM electronics are housed in a fully waterproof control module mounted below the deck of the boat. All electronics are sealed in marine-grade polyurethane to provide corrosion-proof protection, and the extruded aluminum housing features specially designed fins that dissipate heat to keep things cool under high rpm use.

digital maximizer.

Engine Mount Guide.

By controlling the draw of power at variable speeds, Digital Maximizer eliminates wasted energy, extends battery life and gives you more time on the water.

• Minimum clearance required from spine of outboard to end of cavitation plate (see diagram). • Cavitation plate to waterline 13" (minimum).

Minn Kota engine Mount motor selection chart. BOAT length

14'

16'

18'

20'

22'

55EM – 12V

24'

= 7-1/4"

MOTOR SELECTION

80EM – 24V

101EM – 36V

160EM – 24V

= 3" (80EM/101EM) 3-3/4" (55EM) = 13"

anchor winches

deckhand Anchor Winches

Serious anglers know that boat placement and control play as much a part in catching fish as any other factor. A Minn Kota trolling motor can take you to the fish, our DeckHand anchor winches can keep you there.

DeckHand 40.

Why do all the work when a DeckHand will do it for you? These electric winches will automatically raise or lower your anchor at the touch of a button. A special anti-drag system senses the bottom to allow for controlled drifting. • Davit can be mounted at base of DeckHand or in remote position on boat deck • 40-lb anchor capacity (anchor not included) • Pre-spooled with 100 feet of 800-lb test nylon rope • Universal davit stows anchor horizontally to eliminate anchor swing

deckhand stay in the strike zone.

• Anchor shackle allows for quick changes between anchors

25' cord allows you to operate the DeckHand 40 from anywhere on the boat (optional accessory).

DRIFT SOCK.

The DeckHand 25R has a 12-foot corded remote control to let you operate your DeckHand from anywhere on the boat. • 25-lb anchor capacity (anchor not included) • Includes davit for stowing most styles of anchors • Pre-spooled with 60 feet of 800-lb test nylon rope

DeckHand 25.

• 25-lb anchor capacity (anchor not included) • Includes davit for stowing most styles of anchors • Pre-spooled with 60 feet of 800-lb test nylon rope

minnkotamotors.com

DeckHand 40 Remote Switch.

DeckHand 25R.

MKA-28 Drift Sock Harness.

Slow down your drift to enable proper bait presentation over holding fish with Minn Kota’s Drift Sock, designed with durable construction. The MKA-27 features built-in weights and floats, allowing it to automatically open when placed in the water.

• 7' length • 1 2" sewn loop attaches to any cleat • Quick connect clip

DeckHand Pontoon.

Our DeckHand Pontoon includes a MKA-16-02 quick release bracket and MKR-12 quick connect plug. Allows for fast, easy removal to clear the deck when needed. Also includes DeckHand 40 remote switch for convenient operation from anywhere on the boat.

•F loat allows sock to be quickly released to prevent tangles when fighting/landing fish

WIND

Drift Sock works against wind and current to improve bait presentation over holding fish.

mkA-26 34" deep x 22" diameter 210 denier ripstop nylon Four heavy-duty 1" nylon straps

mkA-27 34" deep x 22" diameter 420 denier ripstop nylon Four heavy-duty 1" nylon straps Built-in weights/floats

MKA-28

chargers

mk 110D

On-board marine battery chargers

On-Board Marine Battery Chargers MORE POWER TO YOU.

mk 210d

minnkotamotors.com

mk 220d

mk 330d

mk 440d

mk 106d, mk 230d, mk 315d, mk 345d, mk 460d not shown.

ON-BOARD MARINE BATTERY CHARGERs. With a microprocessor-based design, our digital on-board chargers protect your battery, charge faster, and help you stay on the water longer.

BATTERY CHARGER TEMPERATURE COMPENSATION absorption voltage

15.5

Digitally controlled.

We set out to build a smarter charger, and the result is our ingenious microprocessor-based design. By continuously monitoring temperature and state of charge, they deliver a faster, more regulated precise charge – so you can stay on the water longer, without worrying about your batteries.

PROTECTS BATTERIES.

Our on-board chargers feature Automatic Temperature Compensation and Multi-Stage Charging for more precise charges that won’t damage your battery. And its automatic shut-off feature extends battery life by shutting down when charging is complete. So your battery – and your day on the water – will always last longer.

BATTERY VOLTAGE

(output voltage)

TWO TIMES FASTER CHARGING.

In high temperatures, our on-board chargers juice up your batteries up to twice as fast. Thanks to a digital design that monitors everything from temperature to state of charge, our on-boards get the job done.

14.5

14 13.5

13 12.5

100

BATTERY TEMPERATURE (degree F)

Automatic Temperature Compensation.

Here’s a simple fact about a complex technology: overcharging or undercharging your battery will wear it out fast. That’s why our chargers are equipped with Automatic Temperature Compensation. They sense the outside temp, then adjust the voltage accordingly. So you get a perfect, full charge each time, without damaging your battery.

ENHANCED STATUS CODES.

Comprehensive readings on our on-board chargers inform you of the charge stage, maintenance mode status, any error notifications and full charge.

• Waterproof, shock- and vibration-resistant aluminum construction • Saltwater tested and fully corrosion-resistant • Short circuit, reverse polarity, arc and ignition protected • For use with 12V/6 cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only • FCC compliant • UL listed to marine standard 1236

mk 106D 1 bank 6 amps output 6 amps total output

mk 110D 1 bank 10 amps output 10 amps total output

mk 210D 2 banks 5 amps output per bank 10 amps total output

mk 220D 2 banks 10 amps output per bank 20 amps total output

mk 230D 2 banks 15 amps output per bank 30 amps total output

mk 315D 3 banks 5 amps output per bank 15 amps total output

mk 330D 3 banks 10 amps output per bank 30 amps total output

mk 345D 3 banks 15 amps output per bank 45 amps total output

mk 440D 4 banks 10 amps output per bank 40 amps total output

mk 460D 4 banks 15 amps output per bank 60 amps total output

chargers & Accessories

NEW i-Pilot i-Pilot uses GPS technology to deliver total boat control. You can store and retrieve locations and paths on the water, control speed and steering, set cruise control and stay on a heading – all with unparalleled GPS accuracy. The new i-Pilot remote features a 20% larger screen and highvisibility buttons; and the new system features double the memory for Spot-Lock and Record a Track. Neck lanyard and belt carabiner included. Learn more on pages 10-11.

Portable Charger.

Available on Terrova, PowerDrive V2, Riptide ST and Riptide SP bow-mount trolling motors.

On-Board DC Alternator Charger.

Choose the combination of banks, amps and total power output that suits you best – then take it with you.

Use your main engine to charge up your batteries on runs between fishing spots.

Redesigned Remote.

The new i-Pilot remote features a 20% larger LCD screen, high-visibility laser-etched buttons and an easy-access external battery compartment. Compact, watertight and easy to use, this remote gives you instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength. For replacement or spare remote accessory, see page 61.

Universal Sonar 2 Adapters MK 210P

portable & dc alternator ready when you are. Portable Chargers.

Get power to go, with portable chargers that feature multi-stage charging to keep you on the water longer. Their innovative design prevents overcharging and undercharging to extend the life of your batteries. • Fully automatic 3-stage charging (bulk, absorption and maintenance)

• LED display indicates power ON, charging, full charge and check connection • Short circuit and reverse polarity protection prevents chargers from operating if improperly connected to the battery • For use with 12V/6 cell batteries (50-130 amp hour rating) that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only

60˚ 83kHz

*200kHz and 200/83kHz DualBeam PLUS compatible. Not compatible with Humminbird Side Imaging.

Wireless CoPilot

• Charge-on-the-fly circuitry puts additional juice back in your trolling batteries on runs between fishing spots – turns off when engine stops

Control speed, steering and on/off from anywhere on the boat with the CoPilot wireless remote. The handheld, waterproof remote is conveniently attached to a neck lanyard for easy access and also floats.

• LED indicators display power-on, charging and check connection • For use with 12-volt systems with 12V/6 cell batteries that are flooded/wet cell, maintenance free or starved electrolyte (AGM) only

• UL listed to marine standard 1236

• FCC compliant

Two Additional Buttons, Endless Options.

On Terrova and Riptide ST, CoPilot adds two extra features: reach maximum speed in an instant with the high speed bypass button, and get one-touch AutoPilot activation. Each CoPilot system includes: receiver, key-fob remote and neck lanyard.

mk 210p 2 banks 5 amps output per bank 10 amps total output

* E xcept the MK 105P, which charges in two stages (bulk and maintenance).

MKR-US2-1 Garmin MKR-US2-8 Humminbird 7-pin MKR-US2-9 Lowrance 6-pin/Eagle Blue MKR-US2-10 Lowrance MKR-US2-11 Universal Sonar 2 Extension Cable

Our DC Alternator Chargers utilize power from the main engine to help charge your trolling motor batteries. Each model features a waterproof, low-profile, corrosion-resistant design, and a master cutoff switch.

• FCC compliant

mk 110p 1 bank 10 amps output 10 amps total output

Shielded for Added Peace of Mind.

These shielded cable connectors virtually eliminate the possibility of sonar interference and they’re waterproof for extra dependability.

On-board DC Alternator Chargers.

• Includes one 6-foot fused input cable and one 6-foot fused output cable

mk 105p * 1 bank 5 amps output 5 amps total output

20˚ 200kHz

minnkotamotors.com

Universal Sonar 2 delivers advanced water temperature sensing and DualBeam PLUS technology for the best view of the waters below. These adapters connect your motor to your favorite brand of sonar or fishfinder* with IP68-rated waterproof connectors.

mk 2 dc

mk 1 DC 1 bank 10 amps output 10 amps total output

mk 2 DC 2 bankS 10 amps output per bank 20 amps TOTal output

See page 64 for specifications.

mk 3 DC 3 banks 10 amps output per bank 30 amps total output

Available on the following motors: • Wireless CoPilot for Terrova • Wireless CoPilot for PowerDrive, Riptide with AutoPilot and PowerDrive V2

High Speed Bypass (Terrova only) AutoPilot On/Off (Terrova only) Steer Left Propeller On/Off Decrease Speed Increase Speed Steer Right

Wireless Accessories (not shown):

Wireless Foot Pedal (PowerDrive or PowerDrive V2 CoPilots). For replacement or spare remote accessory, see page 61.

power management & accessories

i-Pilot installs simply: just replace the top of the motor head, activate your remote and you’re ready to fish.

Actual Size

accessories

PowerDrive Foot Pedal

Battery Connectors (MK-BC-1)

Replacement MicroTouch™ foot pedal for PowerDrive and Riptide electric steer bow-mount motors.

Patented design is ideal for installing batteries in tight, confined places. Easy to disconnect for quick, convenient charging. Plastic cover eliminates risk of electrical shock. 58

Riptide ST/terrova Foot Pedal

Low-profile design offers two steering options: heel/toe pedal or left/right steering buttons. Includes rotary speed control dial, momentary/constant on toggle, AutoPilot on/off toggle and 18' cable with IP68-rated waterproof connector plug. Plug-n-play with Riptide ST or Terrova motors and works in conjunction with CoPilot.

Trolling Motor power center

For small boat, transom applications, these easy access external battery terminals allow trolling motor leads and charger leads to be connected without opening the box. Built-in battery meter includes two 12-volt accessory plugs, and 2 manual reset circuit breakers (15 amp for accessory plugs and 60 amp for trolling motor). Fits group 24- and 27-size batteries.

Riptide SP/powerdrive v2 Foot Pedal

Side-to-side steering pedal includes momentary/constant on switch, speed control knob for precise adjustments and 18' cable with IP68-rated waterproof connector plug. Plug-n-play with Riptide SP or PowerDrive V2 motors and works in conjunction with CoPilot. Available corded or wireless. corded

Digital Battery Meter (MK-BM-1D)

Monitor the voltage level and “state of charge” of any 12-volt battery with an LCD display mounted on a compact frame that’s easy to store anywhere. Includes LEDs that indicate full, 2/3, 1/3 or 0 “state of charge.”

wireless

MKA-23

RTA-19

Composite Quick Release Brackets

(MKA-21, MKA-23, RTA-17, RTA-19)

Easily remove any Terrova, PowerDrive V2, PowerDrive or Pontoon Hand Control (MKA-21); Fortrex, Maxxum, Maxxum Pro, All Terrain or Edge (MKA-23); Riptide ST or Riptide SP (RTA-17); or Riptide SF, Riptide SM or Riptide SE (RTA-19) bow-mount motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel pins can be secured with padlock (not included).

MKR-23)

Our convenient adapter allows quick thru-hull connection to an AC extension cord using the male AC plug from any of our chargers. No cutting or splicing required. The watertight cover and gasket prevent corrosion on the AC plug when it isn’t in use. MKR-23 AC Power Port Saltwater

MKR-21 AC Power Port Freshwater

RTA-17

Trolling Motor Quick Connect (MKR-12) Adapter Plate for Composite Quick Release Brackets

For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.

(MKA-22)

Allows hole patterns from previously mounted motors to be used with composite brackets (MKA-21 and RTA-17). Ideal for carpeted deck surfaces. MKA-22

Center puck not included with adapter plates.

Cover included with quick release bracket.

Electric Steer Quick Release Bracket with Cover

Trolling Motor Quick Connect Plug (MKR-20)

(MKA-32)

Quickly remove any Terrova, PowerDrive V2 or PowerDrive bow-mount trolling motor. Cam-lock design and ultra-tight tolerances eliminate bracket movement and noise. Locking lever includes pin and lanyard. Upper and lower plates can be secured with padlock (not included). Composite cover attaches to lower half of bracket when motor is removed, keeping the deck profile clean.

Heavy-duty connector has positive snap-lock design for 6- to 12-gauge wire. Kit includes two plug halves, four contacts and four solder plugs for securing wire leads into the contacts (wire not included).

Aluminum Quick Release Brackets

Trolling Motor Plug and Receptacle (MKR-18/MKR-18A)

MKA-32

MKA-42

(MKA-16-02, MKA-42, MKA-52/62)

For easy, quick removal of any Terrova, PowerDrive V2, PowerDrive (MKA-16-02); Fortrex or Maxxum (MKA-42, MKA-52/62) bow-mount trolling motor. Extruded aluminum design with side screw provides quiet and secure locking system. MKA-42 fits 42" shaft foot control motors, 42" and 52" shaft hand control motors. MKA-52/62 fits 52" and 62" shaft foot control motors and 62" shaft hand control motors.

Universal design for 2- or 3-wire configurations on 12- to 36-volt systems. Watertight sealing cap and corrosion-resistant electrical components. Requires standard 1-1/8" diameter mounting hole. MKR-18A allows for 6-gauge wire connection. MKR-18A

MKA-16-02 MKR-18

minnkotamotors.com

Trolling motor attaches to top of bracket. Bracket locks in over top of deckmounted center puck.

MKA-21

AC Power Port (MKR-21,

accessories

Circuit Breaker (MKR-19)

Weedless Wedge 2 Prop (MKP-32, MKP-33)

Protects trolling motor from electrical damage. 60 amp rating with manual reset. Fully waterproof. Compatible with all 12-, 24- and 36-volt systems.

Swept-back and flared blades push weeds away even better than the original Weedless Wedge™. Delivers improved efficiency through the heaviest vegetation, at any speed. See page 65. 60

Weedless Wedge Prop (MKP-6,

Charger Output Extension Cables (MK-EC-15)

MKP-7, MKP-8, MKP-24)

100% weedless. Unique, patented design pushes weeds away to conserve battery power. Easily moves through heavy vegetation, even at slow speeds. See page 65.

xtension cables are ideal when standard charger cables will not reach bow, center or E transom battery compartments. Features WAGO® Wall-Nut™ quick connectors (UL listed). Fused (30 amp) positive and negative leads. Available in 15' length.

Power Prop (MKP-2)

Delivers extra power to push through heavy vegetation. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters. See page 65.

Bow-Mount Stabilizer Kit (MKA-4)

educes bounce on Maxxum Pro, Maxxum, Riptide Pro and Riptide SM bowR mount motors. Attaches to the top side of the upper arm of the scissors mount. When motor is stowed, the stabilizer is positioned vertically between the upper arm of the bracket and the deck of the boat. Rubber bumper protects deck finish.

Transducer Mounting Kit (MKR-15)

Allows mounting on lower unit of bow- or transom-mount motors. Rugged, durable construction. Fits transducers of all major manufacturers.

Bow-Mount Stabilizer Kit (MKA-29)

Prop Nut Kit (MKP-9,

MKP-10, MKP-11, MKP-23, MKP-34)

Easy-to-use kit that allows for fast removal/replacement of prop. Available in three different sizes to fit Minn Kota prop dimensions (3/8", 1/2" and 5/16"). Requires crescent wrench for installation.

Rope and Handle (MKA-45)

For Minn Kota cable steer bow-mount motors, this replacement handle features an ergonomic soft-grip design and durable, abrasion resistant 48" nylon rope.

Quick Nuts (MKR-8)

Allows for mounting motor/accessories where there is limited space or no access from below (as required by standard nuts and bolts).

MKA-43 25"

Telescopic Extension Handles (MKA-43,

NEW i-pilot replacement remote

MKA-44)

imply twist the handle to loosen, adjust and tighten our extension handles. Go S from 17" to 25" (MKA-43) or 24" to 40" (MKA-44) and experience total speed and steering control in any situation. Fits all outboard and trolling motors.

Add an unlimited number of remotes to your i-Pilot GPS trolling system (sold separately) for increased flexibility. The new i-Pilot remote features a 20% larger LCD screen, high‑visibility laser-etched buttons and an easy-access external battery compartment. Compact, watertight, and easy to use, this remote gives you instant feedback on active functions, speed, prop on/off status, battery power and GPS signal strength.

MKA-44 40"

NOTE: This remote is compatible with all i-Pilot systems. This remote does not increase the Spot‑Lock or Record a Track memory of the i-Pilot system.

MKA-18

MKA-7

Extension Handles (MKA-7,

copilot replacement remote

MKA-18)

Provides easier steering and speed control for all hand control motors. Available in 18" (MKA-18) or extra-long 30" (MKA-7) models. Terrova, Riptide ST Remote

PowerDrive V2, PowerDrive, Riptide SP Remote

Get a spare or replacement wireless remote for your CoPilot system (sold separately) to take control of prop on/off, speed and steering. The Terrova/Riptide ST remote also gives you the power to hit maximum speed in an instant or activate AutoPilot.

minnkotamotors.com

Fit any Maxxum Pro, Maxxum, Riptide Pro or Riptide SM bow-mount trolling motor. Fits between upper and lower arm of mounting bracket. Pivots into vertical position when motor is stowed to reduce bounce from heavy chop or wake. Rotates into horizontal position along side upper arm when motor is deployed. Saltwater tested and fully resistant to corrosion.

ACCESSORIES

Talon mounting and adapter brackets

ACCESSORIES

We didn’t just build ’em strong, we built ’em smart. A Minn Kota Quick Release Mounting Bracket enables Talon to adjust up and down or pivot up to 30° to accommodate any transom angle. That means you can adapt Talon to fit any boat, and any situation. You can also easily remove it when not in use for added security.

Are You Mounting on the Port or Starboard Side?

You can mount Talon on either side of your outboard, but we recommend the port side for maximum clearance between Talon and the outboard cowling. PORT

STARBOARD

Keep it Simple.

The simplest solution is often the best. That’s why we built Talon without messy hydraulic pumps and hoses. And why we built the mounting brackets to be easy to install and easy to work with. The space-saving design makes mounting Talon as easy as mounting a trolling motor. Just use the guide below to select the right bracket for your boat. Then mount it up and get on the water.

E YEA

Added Security All mounting and adapter brackets carry a 5-year warranty.

Quick Release Disconnect Plug. This heavy-duty waterproof power connector features a screw-lock design that can accommodate 14- to 20-gauge wire.

Dual Talon Remote*. If you’ve mounted two Talons to your boat, this four-button remote gives you independent control of each of them. Talon can learn up to 10 remotes. The remote is waterproof and floats. Includes a battery and neck lanyard.

Quick Release Handle Kit. Easily remove Talon from your boat when not in use for safe storage with these stainless steel handles. It lets you vertically adjust or remove Talon without any tools.

*patent pending

Do You Need an Adapter Bracket?

Bracket CatEgory

This depends on whether you have a flat or curved transom. If you have a flat transom, we recommend mounting Talon directly to it (all hardware is included for this). If you have a curved transom, you’ll need an adapter bracket. PORT

STARBOARD

PORT

STARBOARD

PORT

STARBOARD

setback

Rise

port/starboard

finding your bracket.

1810320

J3SLR

Starboard

All adapter brackets feature a code that indicates setback distance, rise and mounting location:

1810321

J3PLR

Port

1810322

J6SLR

Starboard

1810323

J6PLR

Port

1810324

J9SLR

Starboard

1810325

J9PLR

Port

1810310

3SLR

Starboard

1810311

3PLR

Port

1810312

6SLR

Starboard

[S or P] Indicates Starboard or Port mount.

How Much Setback Do You Need?

To keep Talon away from any transom‑mounted items (such as trim tabs or transducers), you’ll want to set it back 3, 6 or 9 inches. We recommend using the smallest amount of setback possible for optimum performance.

CURVED TRANSOM

How Will You Mount Your Talon?

Depending on how your outboard is mounted to your transom, you may need a different bracket. We recommend mounting to the side of your jack plate. NOTE FOR TRITON BOAT OWNERS: If you are not mounting Talon to the side of your jack plate, you will need to select from the Triton adapter bracket category.

item #

[J] I ndicates whether or not bracket will be mounted to side of jack plate. [#] Indicates length of setback (3", 6" or 9").

FLAT TRANSOM

JACK PLATE ADAPTER BRACKETS* mounts to side of jack plate

[L] I ndicates long side clearance, which is standard on all brackets. [R] I ndicates 4" rise, which is standard on all brackets. [T] I ndicates if bracket is for non-jack plate mounting on Triton fiberglass bass boats.

SANDWICH ADAPTER BRACKETS mounted between transom and outboard or transom and jack plate

description

1810313

6PLR

Port

1810314

9SLR

Starboard

1810315

9PLR

Port

NOTE FOR TRITON FIBERGLASS BASS BOAT OWNERS: For non-jack plate mounting, use one of the following brackets PORT

STARBOARD

MOUNTED TO SIDE OF JACK PLATE (Factory Recommended option)

You may mount Talon directly to the side of your jack plate, regardless of your boat model.

PORT

STARBOARD

MOUNTED BETWEEN TRANSOM and JACK PLATE

To mount Talon between your jack plate and transom, select a Sandwich Adapter Bracket from the chart.

PORT

STARBOARD

MOUNTED BETWEEN TRANSOM and OUTBOARD

If you don’t have a jack plate, select a Sandwich Adapter Bracket from the chart.

examples: Talon Adapter Bracket J6PLR: mounts Talon to the side of a jack plate (J), 6” back (6) from the transom, on the port side (P), with standard side clearance (L) and rise (R). Talon Adapter Bracket 9PLR: mounts Talon 9" back (9) from the transom, on the port side (P), with standard side clearance (L) and rise (R). Talon Adapter Bracket 3SLRT: mounts Talon 3" back (3) from the transom, on the starboard side (S), with standard side clearance (L) and rise (R), on a Triton boat (T).

1810330

TRITON ADAPTER BRACKETS

3SLRT

Starboard

1810331

3PLRT

Port

1810332

6SLRT

Starboard

1810333

6PLRT

Port

* Minn Kota Talon side mount jack plate kits include hardware for Atlas hydraulic, Z-Lock manual, and Slidemaster manual jack plates. Not all jack plates are equipped with mounting holes to accept side mount adapter brackets. Drilling holes to accept side mount adapter brackets may void your manufacturers warranty. Minn Kota is not responsible for damage that may result.

other talon mounting accessories item #

description

setback

port/starboard

1810210

Talon Spacer Block Kit**

Both

1810211

Talon BMS Spacer Block Kit – for sandwich mounting between outboard and jack plate

Both

1810212

Talon BMS Side Shim Kit – fills recess gap on side of BMS jack plate; for jack plate mounting

Both

1810220

Setback Bracket, 6" — for direct mount installations only

Both

** NOTE: Some earlier Atlas hydraulic jack plates do not have mounting holes drilled from the factory. Jack plates without mounting holes will have to be drilled and may require part # 1810210 spacer block kit.

minnkotamotors.com

Make Your Move.

With the anchoring power of Talon on your transom, you’d better have something to hold it all in place. Our uncompromising brackets do just that and then some. Made of rugged extruded aluminum and reinforced with a shock-absorbing, double-wall design, our brackets hold Talon firm whether you’re trailering or tearing through heavy chop.

The Hold Steady.

Sticking Power. Talon’s double-wall design is a sticky situation. The two metal plates are bonded together with an industrial‑strength adhesive that requires 32,000 pounds of force to break. That’s 16 tons, gentlemen. Then, just to be sure, we reinforced them with heavy‑duty stainless steel bolts.

Talon Replacement Remote. Pick up a spare or replacement for the standard two-button wireless remote. Talon can learn up to 10 remotes. The remote is waterproof and floats. Includes a battery and neck lanyard.

TALON MOUNTING AND ADAPTER BRACKETS

Just like Talon locks you to your spot in the water, our mounting and adapter brackets keep Talon locked to your boat in any condition. The rugged double-wall design provides unparalleled strength, and with a smart, innovative design, it’s easy to get Talon rigged up right.

charts

replacement prop selection chart

pick the right charger, as easy as 1-2-3.

Minn Kota offers a wide range of replacement props to fit all existing and many discontinued models. The props include the nut attachment and can be installed in seconds. 12 volt

weedless wedge 2 props

applicable motor models

12 volt

MKP-32 PRop No.: Motor Dia.: Prop Nut Kit

#2091160 3-5/8" “A”

12 volt

1 battery = 1 charging bank

2 batteries = 2 charging banks

3 batteries = 3 charging banks

4 batteries = 4 charging banks

Motor Models With Serial Number Prefix “WW” OR “J” through “m” 55AT, 55AT/H, 70AT, Terrova 55, Terrova 55/US2, Terrova 55/AP, Terrova 55/AP/US2, MAX 55/SC, MAX 55, MAX 55/SC/H, MAX 70, MAX 70/H/3X, MAX 70/SC, MAX 70/SC/H, MAX 70/US, MAX 55T, MAX 70T, 50pd v2, 55pd v2, 55pd v2/us2, 55pd v2/ap, 55pd v2/ap/us2, 65pd v2, 70pd v2, 70pd v2/ap, 70pd v2/ap/us2, 54pd v2 pontoon, 68pd v2 pontoon, 55HC pontoon, 70hc pontoon, 50PD, 55PD/AP, 55PD/AP/US, 55PD/US, 65PD, 70PD, 70PD/AP, 70PD/US, 70PD/AP/US, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 70, VECTOR 70/3X, edge 45, edge 55, edge 55/h, edge 70, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, ENDURA PRO 55, CAMO 55XL, rt55/st/cp, rt55/st/cp/ap, rt55/sp/cp, rt55/sp/cp/ap, rt70/sp/cp, rt70/sp/cp/ap, rt55/sm/l&D, rt55/sm/l&D/sc, rt70/sm/l&D/sc, rt55/se/l&D, rt70/se/l&D, rt55/b/h, RT55/B/SC/L&D, RT65/B/SC, rt70/b/h, rt70/sc, RT50/S, RT55/S, mk55em, rt55em, Traxxis 70, Traxxis 55, Traxxis 55/SC

MKP-33 PRop No.: Motor Dia.: Prop Nut Kit:

#2331160 4" “E”

step 1 Determine how many charging banks your trolling system requires. You need one charging bank for each battery (include your starting battery, if appropriate).

step 2 Determine the speed of recovery/recharging time you require.

3 - 5 hours recovery time = 15 amps per bank

4 - 6 hours recovery time = 10 amps per bank

Weedless Wedge 2 The next generation of the industry’s only 100% fully weedless prop. Swept-back, flared blades “wedge” weeds away, allowing you to pass through heavy vegetation at any speed, without draining valuable battery power.

10 - 12 hours recovery time = 5 or 6 amps per bank

step 3 Select the Minn Kota charger that best meets your needs from chart below.

on-board digital charger product specifications DESCRIPTION

1821065 1821105 1822105 1823155 1822205

HEIGHT

WEIGHT (LBS)

4-3/4"

4.5

7-1/2"

11-1/2"

7-1/2"

12-1/2"

7-1/2"

LENGTH

WIDTH

MK 106D On-Board Charger

8-3/4"

MK 110D On-Board Charger

10-1/2"

MK 210D On-Board Charger MK 315D On-Board Charger MK 220D On-Board Charger

13-1/2"

# OF BANKS

output PER BANK (amps)

total output (amps)

RECOVERY TIME* (HOURS)

10-12

4-6

10-12

4-6

1823305

MK 330D On-Board Charger

16-1/4"

7-1/2"

4-6

1824405

MK 440D On-Board Charger

11-3/4"

6-3/4"

22.5

4-6

1822305

MK 230D On-Board Charger

11-3/4"

6-3/4"

16.6

3-5

1823455

MK 345D On-Board Charger

11-3/4"

6-3/4"

3-5

1824605

MK 460D On-Board Charger

14-1/2"

6-3/4"

3-5

Motor Models With Serial Number Prefix “WW” OR “J” through “m” terrova 80, terrova 80/US2, terrova 80/AP, terrova 80/AP/US2, terrova 101, terrova 101/US2, terrova 101/AP, terrova 101/AP/US2, MAX 80, MAX 80/BG/US2, MAX 80/US, MAX 101, MAX 101/US, max 101/h, MAX PRO 80, MAX pro 80/BG/US2, MAX PRO 80/US, MAX PRO 101, MAX pro 101/BG/US2, MAX PRO 101/US, MAX 80T, MAX 80/H, 80PD, 80PD/AP, 80pd/us, 80PD/AP/US, VECTOR 80/3X, VECTOR 101/3X, VANTAGE 80, VANTAGE 101, RT80/st/cp, RT80/st/cp/ap, RT101/st/cp/ap, rt pro 80, rt pro 101, RT80/sM/l&d, RT80/sm/bg, RT101/sm/bg, RT80/B, RT80/B/L&D, RT80/S, RT101/B, rt101/s, RT80/AP, mk80em, mk101em, mk160em, mk202em, rt80em, rt101em, rt160em, rt202em, RT101/SF, RT80/SF, Fortrex 101/US2, Fortrex 101, Fortrex 80/US2, fortrex 80, traxxis 80, ALL TRIM-N-TROLL KITS

weedless wedge props

applicable motor models

MKP-6 PRop No.: Motor Dia.: Prop Nut Kit:

#2061125 3-1/4" “A”

40PD V2, 40PD, 40AP, edge 40, edge 40/h, ENDURA 30, ENDURA 34, ENDURA 36, Endura 38, ENDURA 40, ENDURA PRO 32, ENDURA PRO 38, 40AT, 40AT/H, MAX 30T, MAX 36T, MAX 40t, vector 40, Traxxis 40, Traxxis 40/SC

MKP-7 PRop No.: Motor Dia.: Prop Nut Kit:

#2091150 3-5/8" “A”

MKP-8 PRop No.: Motor Dia.: Prop Nut Kit:

#2331120 4" “B”

MKP-24 PRop No.: Motor Dia.: Prop Nut Kit:

#2331130 4" “D”

Motor Models With Serial Number Prefix “MK” OR “J” through “m” MAX 55, MAX 55/H, MAX 55/SC, MAX 50T, MAX 55T, 65PD, 50PD, 55PD, 55PD/AP, 55PD/US, 55AP, 55AP/US, 65AP, 65PD/AP, 65PD/US, 65AP/US, 54PD PONTOON, 64PD PONTOON, RT55/B/SC/L&D, RT55/SC/H, RT55/AP, RT50/S, RT50/S/SC, RT55/S*, ENDURA 42, ENDURA 44, ENDURA 46, ENDURA 50, ENDURA 55, ENDURA PRO 46, VECTOR 46, VECTOR 55, VECTOR 55/3X, VECTOR 65, VECTOR 65/3X *Refer to original prop on motor Motor Models With Serial Number Prefix “MK” OR “J” through “m” 74PD, 74PD/AP, 74PD/AP/US, MAX 74, MAX 74/US, MAX 74/H, 64PD, VANTAGE 74 Motor Models With Serial Number Prefix “MK” OR “J” through “m” max 101, MAX 101/H, Vantage 101, RT101/S, RT101/S/3X, RT101/B, RT101/B/H, RT101/B/BG/3X, VECTOR 101/3X

*Approximate time to restore deep cycle batteries at 60% discharge.

on-board alternator charger product specifications ITEM #

DESCRIPTION

LENGTH

WIDTH

HEIGHT

WEIGHT (LBS)

# OF BANKS

1821031

MK 1 DC On-Board Alternator Charger

7-1/4"

3-1/2"

1821032

MK 2 DC On-Board Alternator Charger

10-1/2"

7-1/4"

3-1/2"

6.5

1821033

MK 3 DC On-Board Alternator Charger

14-1/2"

7-1/4"

3-1/2"

8.5

output PER BANK** total output** (amps) (amps)

RECOVERY TIME* (HOURS)

***

power props MKP-2 PRop No.: Motor Dia.: Prop Nut Kit:

#2061121 3-1/4" “A”

MKP-37 PRop No.: Motor Dia.: Prop Nut Kit:

#2091170 3-5/8" “A”

applicable motor models

camo 45, classic 28, EDGE 45, EDGE 45/H, Endura 30, Endura 36, Endura 38, Endura 40, Endura 45, Endura Pro 32, Endura Pro 38, 45PD V2, RT40/SC, RT45/SC/T, TRAXXIS 45/SC, TRAXXIS 45 endura c2 55, endura c2 50, camo 55, traxxis 70, traxxis 55/sc, traxxis 55, rt55/t, rt50/sc/t For a complete compatibility chart, go to minnkotamotors.com.

shaft length selection guide

*Approximate time to restore deep cycle batteries at 60% discharge. **Dependent on alternator output. ***Dependent on alternator output and amount of time engine runs.

Measure down from the mounting surface of the transom or bow to the water level*. Use this measurement and the tables below to find the appropriate shaft length.

portable charger product specifications

Transom Guide

ITEM #

DESCRIPTION

LENGTH

WIDTH

HEIGHT

WEIGHT (LBS)

# OF BANKS

output PER BANK (amps)

total output (amps)

RECOVERY TIME* (HOURS)

1821051

MK 105P Portable Charger

6-1/2"

3.4

10-12

1820110

MK 110P Portable Charger

7-3/4"

6.5

4-6

1822110

MK 210P Portable Charger

7-3/4"

6.7

10-12

*Approximate time to restore deep cycle batteries at 60% discharge.

BOW Guide

Engine Mount Guide • Minimum clearance required from spine of outboard to end of cavitation plate (see diagram at right).

Transom to Waterline

Recommended Shaft Length

0" to 10" 30" 10" to 16" 36" 16" to 22" 42" Over 22" Consult Factory

Bow to Waterline

0" to 10" 16" to 22" 22" to 28" 28" to 34"

Recommended Shaft Length

36" 42" to 45" 48" to 52" 54" to 62"

* Add 5" to waterline measurement for fishing in rough water. Optimal operating mode is with engine trimmed all the way down.

• Cavitation plate to waterline 13" (minimum).

= 7-1/4"

= 3" (80EM/101EM), 3-3/4" (55EM)

= 13"

minnkotamotors.com

ITEM #

Exclusive Weedless Wedge Props The patented Weedless Wedge is the only 100% weedless prop in the history of fishing. The leading edge on each propeller blade is shaped with a swept-back edge that always meets at an angle of less than 45 degrees. “Wedges” weeds away from the hub – even at slow fishing speeds.

charts

motor selection CHART Model

Mount

control

max thrust

Max amp draw

volts

speeds (fwd/rev)

shaft length

prop

composite shaft

universal sonar 2

i-pilot

autopilot

digital maximizer

battery gauge

max boat length★

Terrova Bow-Mount Motors

Terrova 101/AP/US2 Terrova 80/AP/US2 Terrova 80/AP Terrova 80/US2 Terrova 80 Terrova 55/AP/US2 Terrova 55/AP Terrova 55/US2 Terrova 55

Terrova Terrova Terrova Terrova Terrova Terrova Terrova Terrova Terrova

Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer

101 80 80 80 80 55 55 55 55

46 56 56 56 56 50 50 50 50

36 24 24 24 24 12 12 12 12

Variable Variable Variable Variable Variable Variable Variable Variable Variable

60" 54", 60" 54", 60" 54", 60" 54", 60" 48", 54" 48", 54" 48" 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes Yes — Yes — Yes — Yes —

Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible

Yes Yes Yes Compatible Compatible Yes Yes Compatible Compatible

Yes Yes Yes Yes Yes Yes Yes Yes Yes

25' 25' 25' 25' 25' 21' 21' 21' 21'

Terrova with i-pilot Bow-Mount Motors

Terrova 101/IP/US2 (includes foot pedal) ★ Terrova 80/IP/US2 (includes foot pedal) ★ Terrova 55/IP/US2 (includes foot pedal) ★

Terrova Terrova Terrova

Electric Steer Electric Steer Electric Steer

101 80 55

46 56 50

36 24 12

Variable Variable Variable

60" 45", 60" 45", 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes

Yes* Yes* Yes*

Yes Yes Yes

25' 25' 21'

PowerDrive V2 Bow-Mount Motors

70PD V2/AP/US2 70PD V2/AP 70PD V2/US2 70PD V2 65PD V2 55PD V2/AP/US2 55PD V2/AP 55PD V2/US2 55PD V2 50PD V2 45PD V2

PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive PowerDrive

Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer Electric Steer

70 70 70 70 65 55 55 55 55 50 45

42 42 42 42 40 50 50 50 50 42 42

24 24 24 24 24 12 12 12 12 12 12

Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable Variable

54", 60" 54", 60" 54", 60" 54", 60" 54" 48", 54" 48", 54" 48", 54" 48", 54" 48" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Power Prop

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Yes — Yes — — Yes — Yes — — —

Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible

Yes Yes — — — Yes Yes — — — —

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

23' 23' 23' 23' 23' 21' 21' 21' 21' 20' 17'

PowerDrive V2 with i-pilot Bow-Mount Motors

70PD V2/IP/US2 (no foot pedal) ★ 70PD V2/IP (no foot pedal) ★ 55PD V2/IP/US2 (no foot pedal) ★ 55PD V2/IP (no foot pedal) ★

PowerDrive PowerDrive PowerDrive PowerDrive

Electric Steer Electric Steer Electric Steer Electric Steer

70 70 55 55

42 42 50 50

24 24 12 12

Variable Variable Variable Variable

60" 54" 54" 48", 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

Yes — Yes —

Yes Yes Yes Yes

Yes* Yes* Yes* Yes*

Yes Yes Yes Yes

23' 23' 21' 21'

Fortrex Bow-Mount Motors

Fortrex 101/US2 Fortrex 101 Fortrex 80/US2 Fortrex 80

Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360°

Cable Steer Cable Steer Cable Steer Cable Steer

101 101 80 80

46 46 56 56

36 36 24 24

Variable Variable Variable Variable

45", 52", 62" 45", 52", 62" 45", 52", 62" 45", 52", 62"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

Yes — Yes —

— — — —

Yes Yes Yes Yes

— — — —

25' 25' 25' 25'

Maxxum Bow-Mount Motors

Maxxum 101 Maxxum 80 Maxxum 70 Maxxum 70/SC Maxxum 55 Maxxum 55/SC Maxxum 101/H Maxxum 80/H Maxxum 70/SC/H Maxxum 55/SC/H

Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360° Bowguard 360°

Cable Steer Cable Steer Cable Steer Cable Steer Cable Steer Cable Steer Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 70 70 55 55 101 80 70 55

46 56 42 42 50 50 46 56 42 50

36 24 24 24 12 12 36 24 24 12

Variable Variable Variable 5 Variable 5 Variable Variable 5/3 5/3

42", 52" 42", 52" 42", 52" 42" 42", 52" 42", 52" 52" 52" 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

— — — — — — — — — —

Yes Yes Yes — Yes — Yes Yes — —

— — — — — — — — — —

25' 25' 23' 23' 21' 21' 25' 25' 23' 21'

Edge Bow-Mount Motors

Edge 70 ★ Edge 55 ★ Edge 55/H ★ Edge 45 ★ Edge 45/H ★

Latch & Door Latch & Door Latch & Door Latch & Door Latch & Door

Cable Steer Cable Steer Tilt Twist Tiller Cable Steer Tilt Twist Tiller

70 55 55 45 45

42 50 50 42 42

24 12 12 12 12

5 5 5/3 5 5/3

45", 52" 45", 52" 52" 36", 45", 50" 45"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

23' 21' 21' 18' 18'

Vantage Transom-Mount Motors

Vantage 101 Vantage 80

Metal Breakaway Metal Breakaway

Tilt/Extend Tiller Tilt/Extend Tiller

101 80

46 56

36 24

Variable Variable

Weedless Wedge 2 Weedless Wedge 2

— —

Yes Yes

— —

25' 25'

Traxxis Transom-Mount Motors

Traxxis 80 Traxxis 70 Traxxis 55/SC Traxxis 55 Traxxis 45/SC Traxxis 45

One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

80 70 55 55 45 45

56 42 50 50 42 42

24 24 12 12 12 12

Variable Variable 5/3 Variable 5/3 Variable

42" 42" 36" 36", 42" 36" 36"

Weedless Wedge 2 Power Prop Power Prop Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes Yes

— — — — — —

Yes Yes — Yes — Yes

Yes Yes Yes Yes Yes Yes

25' 25' 21' 21' 18' 18'

Endura c2 Transom-Mount Motors

Endura C2 55 Endura C2 50 Endura C2 45 Endura C2 40 Endura C2 30

Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket Lever Lock Bracket

Telescoping Handle Telescoping Handle Telescoping Handle Telescoping Handle Telescoping Handle

55 50 45 40 30

50 42 42 42 30

12 12 12 12 12

5/3 5/3 5/3 5/3 5/3

36", 42" 36", 42" 36" 36" 30"

Power Prop Power Prop Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

21' 20' 18' 17' 14'

Specialty Transom-Mount Motors

Camo 55 Camo 45 ★

Lever Lock Bracket Lever Lock Bracket

Tilt Twist Tiller Tilt Twist Tiller

55 45

50 42

12 12

5/3 5/3

36" 36"

Power Prop Power Prop

Yes Yes

— —

21' 18'

Pontoon Bow-Mount Motors

68PD V2 54PD V2 Pontoon 70/H ★ Pontoon 55/H ★

PowerDrive w/QR Bracket PowerDrive w/QR Bracket Pontoon Latch & Door Pontoon Latch & Door

Electric Steer Electric Steer Tilt Twist Tiller Tilt Twist Tiller

68 54 70 55

42 50 42 50

24 12 24 12

Variable Variable 5/3 5/3

48" 48" 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible — —

— — — —

Yes Yes — —

23' 21' 25' 21'

E-Drive Electric Outboard

E-Drive E-Drive Tiller

Bolt-on Transom Clamp-on Transom

Outboard Cable Linkage Tilt Tiller

2hp 2hp

40 40

48 48

Variable Variable

20"* 20"*

Stainless Steel Stainless Steel

— —

Yes Yes

25' 25'

engine mount motors

MK101/EM MK80/EM MK55/EM

Single-Composite Single-Composite Single-Composite

Outboard/Engine Steering Outboard/Engine Steering Outboard/Engine Steering

101 80 55

49 58 50

36 24 12

Variable Variable Variable

— — —

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

— — —

Yes Yes Yes

— — —

22' 20' 18'

Freshwater Motors

Riptide ST Saltwater Bow-Mount Motors

RT 101/ST/CP/AP RT 80/ST/CP/AP RT 80/ST/CP RT 55/ST/CP/AP

Terrova Terrova Terrova Terrova

CoPilot CoPilot CoPilot CoPilot

101 80 80 55

46 56 56 50

36 24 24 12

Variable Variable Variable Variable

54", 60" 54", 60" 54", 60" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible Compatible Compatible

Yes Yes — Yes

Yes Yes Yes Yes

25' 25' 25' 21'

Riptide ST Saltwater with i-pilot Bow-Mount Motors

RT 101/ST/IP (no foot pedal) ★ RT 80/ST/IP (no foot pedal) ★ RT 55/ST/IP (no foot pedal) ★

Terrova Terrova Terrova

i-Pilot i-Pilot i-Pilot

101 80 55

46 56 50

36 24 12

Variable Variable Variable

60" 54" 54"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes

— — —

Yes Yes Yes

Yes* Yes* Yes*

Yes Yes Yes

25' 25' 21'

Riptide SP Saltwater Bow-Mount Motors

RT 70/SP/CP/AP RT 70/SP/CP RT 55/SP/CP/AP RT 55/SP/CP

PowerDrive PowerDrive PowerDrive PowerDrive

CoPilot CoPilot CoPilot CoPilot

70 70 55 55

42 42 50 50

24 24 12 12

Variable Variable Variable Variable

54" 54" 48" 48"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes

— — — —

Compatible Compatible Compatible Compatible

Yes — Yes —

Yes Yes Yes Yes

23' 23' 21' 21'

Riptide SP Saltwater with i-pilot Bow-Mount Motors

RT 70/SP/IP ★ RT 55/SP/IP ★

PowerDrive PowerDrive

i-Pilot i-Pilot

70 55

42 50

24 12

Variable Variable

54" 48"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

Yes Yes

Yes* Yes*

Yes Yes

23' 21'

Riptide SF Saltwater Bow-Mount Motors

RT 101/SF RT 80/SF

Lift-Assist/Bowguard 360° Lift-Assist/Bowguard 360°

Tilt/Extend Tiller Tilt/Extend Tiller

101 80

46 56

36 24

Variable Variable

52", 62" 52", 62"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

Yes Yes

— —

25' 25'

Riptide SM Saltwater Bow-Mount Motors

RT 101/SM/BG/H RT 80/SM/L&D/H RT 80/SM/BG/H RT 70/SM/L&D/SC/H RT 55/SM/L&D/SC/H RT 55/SM/L&D/H

Bowguard 360° Latch & Door Bowguard 360° Latch & Door Latch & Door Latch & Door

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 80 70 55 55

46 56 56 42 50 50

36 24 24 24 12 12

Variable Variable Variable 5/3 5/3 Variable

62" 52" 52", 62" 52" 42", 52" 52"

Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2 Weedless Wedge 2

Yes Yes Yes Yes Yes Yes

— — — — — —

Yes Yes Yes — — Yes

— — — — — —

25' 25' 25' 23' 21' 21'

Riptide SE Saltwater Bow-Mount Motors

RT 70/SE/H ★ RT 55/SE/H ★

Compact Latch & Door Compact Latch & Door

Tilt/Extend Tiller Tilt/Extend Tiller

70 55

42 50

24 12

Variable Variable

52" 52"

Weedless Wedge 2 Weedless Wedge 2

Yes Yes

— —

Yes Yes

— —

23' 21'

Riptide Saltwater Transom-Mount Motors

RT 101/T RT 80/T RT 55/T RT 50/SC/T RT 45/SC/T

One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow One-Hand Stow

Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller Tilt/Extend Tiller

101 80 55 50 45

46 56 50 42 42

36 24 12 12 12

Variable Variable Variable 5/3 5/3

52" 42" 36", 42" 42" 36"

Weedless Wedge 2 Weedless Wedge 2 Power Prop Power Prop Power Prop

Yes Yes Yes Yes Yes

— — — — —

Yes Yes Yes — —

Yes Yes Yes Yes Yes

25' 25' 21' 20' 17'

160 80 55

116 58 50

24 24 12

Variable Variable Variable

— — —

24' 20' 18'

Engine Mount Saltwater Motors AP = AutoPilot

CP = CoPilot

H = Hand Control

IP = i-Pilot

RT 160/EM RT 80/EM RT 55/EM SC = Speed Coil US2 = Universal Sonar 2

Dual-Composite Outboard/Engine Steering Single-Composite Outboard/Engine Steering Single-Composite Outboard/Engine Steering ★Denotes new model for 2012. ★Denotes standard industry length for long shaft outboard motor.

Weedless Wedge 2 — — — Weedless Wedge 2 — — — Weedless Wedge 2 — — — ★General guidelines only. See your dealer for specific information on which motor best suits your boat style and intended use.

— Yes — Yes — Yes *Advanced AutoPilot included on i-Pilot.

minnkotamotors.com

saltwater Motors