More Time for Fishing The Mora Nova System is like nothing you’ve ever seen before. It’s an entirely new system developed in partnership with competitive anglers. The core of the system – the ice auger – is based on new technology. Technology that makes the auger fast, stable, and reliable as it cuts all the way through the ice, without jamming. It is also very comfortable to use. The Mora Nova System gives you more time for the fun part – fishing. So take a closer look at the Mora Nova System, which makes winter fishing an even greater experience!
Developed in partnership with competitive anglers
Brand-new technology
More comfortable
Faster & more reliable
No jams! You’ll notice it instantly when you grab your Mora Nova auger. The lightweight Mora cuts all the way through the ice without stopping, fast and quietly. The classic sudden stop – just as the auger goes through the ice – is a thing of the past. And you can also forget about the equally classic jam when you pull the drill out of the hole. What you will remember is how good it felt the first time you drilled with your Mora Nova. The new feel is due to the entirely new ergonomic configuration. The design and construction were based on natural body movements. The result is an auger that saves physical energy and is easily adaptable to your height.
No sudden stops
Cuts easily all the way through the ice New ergonomic design saves energy
m o r a n o va s y s t e m
Mora Nova System auger units are made of a strong, lightweight composite that always maintains optimum cutting position. The composite cutting unit provides much better form stability and torsional rigidity than steel units. The auger unit is very light and easy to replace. Simply loosen two screws and tighten them again when you’re done Like all quality augers from Mora of Sweden, the blades are made of Swedish stainless commercial steel from world-leading steel producer Sandvik. The blades are heat-treated in unique, productcustomized processes to enhance durability and honed razor sharp by skilled craftsmen.
Auger units of strong, lightweight composite
Better form stability and torsional rigidity than steel auger units
Extremely sharp blade of Swedish stainless commercial steel from Sandvik
You can forget about the classic sudden stop when you drill with Mora Nova. It cuts all the way through the ice with no frustrating jams. And you don’t have to push extra hard to get through that final, toughest part of the ice drilling, either. The reason is the dual guide lugs behind the blade on the strong, lightweight composite auger unit. The auger unit slides on the guide lugs as you drill, giving the Mora Nova auger smooth, stable action without jamming, all the way through the ice. The entire solution, including composite auger unit, guide lugs and blade, is protected by a reinforced patent.
Patented guide lugs for smooth, stable action
No jams
The cutting part – a high-class precision tool
Optimum cutting angle for efficient drilling The optimum cutting angle is a key reason the Mora Nova auger cuts so fast and easily through the ice. The cutting edge is slightly pointier than on conventional ice augers. And the factory-set cutting angle is always the same. You can rely on it. That is only one of the ways the consistent premium quality of the Mora Nova System is expressed. Mora Nova quality is based on factors including careful selection of stainless commercial steel to produce blades for different types of ice and unique, product-customized heat treatment of the steel. Add to that Mora of Sweden’s advanced expertise in grinding edge steel, based on more than a century’s experience manufacturing knives.
Consistent premium quality
Unique heat-treatment
Advanced grinding – based on a century of experience and expertise
More Fun on Ice
The Mora Nova auger is lightweight and cuts very quietly through the ice. The spiral is precision-pressed on the shank to achieve the quiet action. You won’t find the usual gap between spiral and shank on your Mora Nova. The spiral component is made of Swedish high-tensile steel, enabling a reduction in the thickness of the spiral. That is one of the reasons the auger is more than 10 percent lighter than conventional ice augers. And yet the Mora Nova’s capacity to move the ice out of the way has not changed – meaning it is very good indeed. The shank has also been reworked. The diameter was increased for functional and design reasons, while the wall thickness was reduced. R&D has given the Mora Nova auger a shank that is very stable while maintaining the same weight as conventional shanks. Tough stress tests under bending show that the shank upholds a very high standard of quality.
Spiral of Swedish hightensile steel
More than 10 percent lighter
Quieter action
Maximum freedom of choice – manual and power head attach to the same base
Twinlock – patented coupler
Always an auger handy
Hand or power drilling? It’s up to you! You can thank the Mora Nova System’s patented coupler – Twinlock – for maximum freedom of choice. If you buy a Mora Nova System with a manual head today, you can switch to a power head later, since you attach the motor to the same base. And, thanks to the patented coupler, it is impossible to attach the manual head or motor the wrong way. And if you happen to run out of gas, the Mora Nova System won’t leave you stranded. All you have to do is detach the motor, attach the manual head and keep on drilling.
The Mora Nova auger cuts through the ice very quietly. The spiral is precision-pressed onto the shank.
The spiral is made of Swedish high-tensile steel for a lightweight and compact auger that weighs more than 10% less than an ordinary ice auger.
Form stable and torsionally rigid auger unit of reinforced composite that always maintains its optimum cutting position.
Optimized cutting angle makes drilling easier.
Patented guide lugs for smooth, stable action all the way through the ice – no frustrating jams.
NY BILD skall lägga till skugga
Heat-insulating, safety grip friction handle.
Reflectors that make it easy to see the auger even in dusk and darkness.
Twinlock – the patented coupler that allows manual or power operation of the base of the MoraŽ Nova auger.
Ergonomically designed manual head for natural, energy saving movements when you drill.
Three position settings for the manual head so you can adjust the length of the auger for comfortable working posture.
New, slim, and flexible edge protector follows the shape of the blade. The razor-sharp blades can be replaced with the edge protectors on. Using the strap, the protector can be easily attached to the manual head. Replaceable blades of stainless commercial steel from worldleading steel producer Sandvik. The blades have a new hole pattern that reinforces the auger unit and blades as a unit.
A thrilling fishing trip has only just begun Our motto is More Fun on Ice. We are going to make that vision a reality by developing the Mora Nova System step-by-step. Shelters, tents, and underwater cameras are already part of the system. And even more products in the pipeline are going to make life more fun and more comfortable for competitive anglers and winter fishing fans everywhere. The Mora Nova System is designed to ensure solutions that let you spend maximum time fishing and minimum time drilling.
Join us on a thrilling fishing trip that has only just begun!
Composite auger units and blades for all types of ice conditions
Exciting new products
Mora Nova System for more fun, more comfortable winter fishing
Mora of Sweden | Box 407 | SE-792 27 Mora Phone: +46 250 59 50 00 | Fax: +46 250 59 50 01 info@moraofsweden.se www.moraofsweden.se